Motorola Solutions 89FT7073 Portable 2-Way Radio User Manual MOTOTRBO Professional Digital Two Way Radio System

Motorola Solutions, Inc. Portable 2-Way Radio MOTOTRBO Professional Digital Two Way Radio System

Contents

Manual

PROFESSIONAL DIGITAL TWO-WAY RADIOMOTOTRBO™ SL Series PORTABLES USER GUIDE
ContentsDeclaration of Conformity....................... 14Important Safety Information........16Software Version............................17Computer Software Copyrights....18Handling Precautions.................... 19RF Energy Exposure andProduct Safety Guidelinesand Instructions......................... 20Getting Started............................... 21How to Use This Guide..................................21What Your Dealer/System AdministratorCan Tell You.............................................21Preparing Your Radio for Use.......22Charging the Battery......................................22Attaching the Battery..................................... 23Attaching the Earpiece/Audio Accessory.......23Powering Up the Radio..................................24Adjusting the Volume.....................................24Identifying Radio Controls............ 25Radio Controls...............................................25Using the 4-Way Navigation Disc.................. 26Using the Keypad.......................................... 27Non-Connect Plus Operations......29Contents1English
Additional Radio Controlsin Non-Connect PlusMode.................................... 30Push-To-Talk (PTT) Button.................30Programmable Buttons....................... 30Assignable Radio Functions.....31Assignable Settings or UtilityFunctions............................ 34Accessing the ProgrammedFunctions....................................... 34Identifying Status Indicators................35Display Icons............................35Call Icons................................. 39Utilities Icons............................39Mini Notice Icons......................40Sent Item Icons ....................... 40Job Tickets Icons..................... 41LED Indicator........................... 41Alert Tones...............................42Indicator Tones........................ 43IP Site Connect ..................................43Capacity Plus .....................................44Linked Capacity Plus ......................... 44Making and Receiving Callsin Non-Connect PlusMode.................................... 46Selecting a Zone.................................46Selecting a Channel............................47Receiving and Responding to aRadio Call...................................... 47Receiving and Respondingto a Group Call....................48Receiving and Respondingto a Private Call ..................49Receiving an All Call ............... 49Receiving and Respondingto a Phone Call .................. 50Making a Radio Call............................51Making a Group Call................ 52Making a Private Call ...........53Making an All Call ................... 54Making a Phone Call withthe One Touch AccessButton..................................54Making a Private Call with aOne Touch Call Button........56Contents2English
Making a Group, Private orAll Call with theProgrammable NumberKey .....................................57Making a Phone Call withthe ProgrammablePhone Button ..................... 58Making a Call with theProgrammable ManualDial Button ...................... 60Stopping a Radio Call ........................ 62Talkaround..........................................63Monitoring Features............................63Monitoring a Channel...............63Permanent Monitor...................64Advanced Features in Non-Connect Plus Mode............ 65Radio Check....................................... 65Sending a Radio Check........... 65Remote Monitor.................................. 66Initiating Remote Monitor......... 66Scan Lists........................................... 68Viewing an Entry in theScan List............................. 68Viewing an Entry in theScan List by Alias Search... 69Editing the Scan List................ 69Scan....................................................73Setting an Active Scan List...... 73Starting and Stopping Scan..... 74Responding to aTransmission During aScan....................................74Deleting a Nuisance Channel...75Restoring a NuisanceChannel...............................75Contact Settings..................................75Making a Group Call fromContacts..............................76Making a Private Call fromContacts .............................77Making a Phone Call fromContacts..............................78Making a Call Alias Search ..... 80Making a Group, Private,Phone or All Call by AliasSearch ................................82Assigning an Entry to aProgrammable NumberKey .....................................83Contents3English
Removing the Associationbetween Entry andProgrammable NumberKey .....................................84Adding a New Contact............. 85Sending a Message to aContact................................85Call Indicator Settings.........................86Activating and DeactivatingCall Ringers for Call Alert ...86Activating and DeactivatingCall Ringers for PrivateCalls ................................... 86Activating and DeactivatingCall Ringers for TextMessage............................. 87Activating and DeactivatingCall Ringers forTelemetry Status withText..................................... 88Assigning Ring Styles.............. 88All Tones.................................. 89Selecting a Ring Alert Type......89Configuring Vibrate Style......... 90Escalating Alarm ToneVolume................................91Call Log Features................................91Viewing Recent Calls............... 91Missed Call Screen.................. 91Storing an Alias from a CallList...................................... 92Deleting a Call from a CallList...................................... 92Viewing Details from a CallList...................................... 93Call Alert Operation.............................93Receiving and Respondingto a Call Alert...................... 93Making a Call Alert from theContact List......................... 93Making a Call Alert with theOne Touch AccessButton..................................94Emergency Operation.........................95Receiving an EmergencyAlarm...................................96Responding to anEmergency Alarm............... 96Exiting Emergency ModeAfter Receiving theEmergency Alarm............... 97Sending an EmergencyAlarm...................................97Contents4English
Sending an EmergencyAlarm with Call.................... 97Sending an EmergencyAlarm with Voice toFollow .................................98Reinitiating an EmergencyMode................................. 100Exiting Emergency ModeAfter Sending theEmergency Alarm............. 100Man Down.........................................100Turning the Man DownFeature On or Off..............101Text Message Features ................... 102Writing and Sending a TextMessage........................... 102Sending a Quick TextMessage........................... 103Sending a Quick TextMessage with the OneTouch Access Button........ 105Accessing the Drafts Folder...105Managing Fail-to-Send TextMessages..........................107Managing Sent TextMessages..........................109Receiving a Text Message.....113Managing Received TextMessages..........................113Job Tickets........................................117Accessing the Job TicketFolder................................117Logging In and Out of theRemote Server..................118Creating and Sending a JobTicket................................ 118Responding to the Job Ticket.119Deleting a Job Ticket..............120Privacy ............................................. 121Covert Mode..................................... 122Entering Covert Mode............ 122Exiting Covert Mode...............122Dual Tone Multi Frequency (DTMF). 123Multi-Site Controls ............................123Starting an Automatic SiteSearch...............................123Stopping an Automatic SiteSearch...............................124Starting a Manual SiteSearch...............................125Security.............................................126Radio Disable.........................126Radio Enable..........................127Lone Worker..................................... 129Contents5English
Password Lock Features.................. 129Accessing the Radio fromPassword.......................... 129Unlocking the Radio fromLocked State..................... 130Turning the Password LockOn or Off........................... 130Changing the Password.........131Bluetooth Operation..........................132Turning Bluetooth On andOff..................................... 133Finding and Connecting to aBluetooth Device...............133Finding and Connectingfrom a Bluetooth Device(Discoverable Mode).........134Connecting to a PairedBluetooth Device...............135Disconnecting from aBluetooth Device...............135Switching Audio Routebetween Internal RadioSpeaker and BluetoothDevice............................... 136Viewing Device Details...........136Editing Device Name..............136Deleting Device Name........... 137Bluetooth Mic Gain.................137Permanent BluetoothDiscoverable Mode........... 138Notification List..................................138Accessing the NotificationList.................................... 138Over-the-Air-Programming (OTAP).. 138Wi-Fi Operation.................................139Turning Wi-Fi On or Off..........139Connecting to a NetworkAccess Point..................... 140Refreshing the Network List...141Adding a Network...................141Viewing Details of NetworkAccess Points................... 142Removing Network AccessPoints................................ 143Utilities.............................................. 143Locking and Unlocking theKeypad..............................143Turning Keypad Tones Onor Off................................. 144Setting the Power Level......... 144Turning the Option BoardFeature(s) On or Off..........145Identifying Cable Type........... 145Contents6English
Turning the Voice OperatingTransmission (VOX)Feature On or Off..............146Setting the Display BacklightTimer.................................147Turning the Backlight AutoOn or Off........................... 147Turning the Radio Tones/Alerts On or Off................. 148Setting the Tone AlertVolume Offset Level..........148Turning the Talk PermitTone On or Off.................. 149Setting the Text MessageAlert Tone......................... 149Changing the Display Mode...150Adjusting the DisplayBrightness......................... 151Wallpaper Mode.....................152Screen Saver Mode............... 152Audio Accessory.................... 153Auto Keypad Lock..................153Language............................... 153Turning the LED IndicatorOn or Off........................... 154Turning the VoiceAnnouncement On or Off.. 154Setting the Text-to-SpeechFeature..............................155Digital Mic AGC (Mic AGC-D)...................................... 156Switching Audio Routebetween Internal RadioSpeaker and WiredAccessory......................... 157Intelligent Audio......................157Turning the AcousticFeedback SuppressorFeature On or Off .............158Setting the Audio Ambience...159Setting the Audio Profiles.......160Text Entry Configuration........ 161Flexible Receive List.............. 166Accessing General RadioInformation........................ 169Checking the RSSI Values.....172Connect Plus Operations............ 173Additional Radio Controlsin Connect Plus Mode...... 174Contents7English
Push-To-Talk (PTT) Button...............174Programmable Buttons..................... 174Assignable Radio Functions...175Assignable Settings or UtilityFunctions.......................... 176Identifying Status Indicators inConnect Plus Mode..................... 176Display Icons..........................176Call Icons............................... 179Sent Item Icons ..................... 180LED Indicator......................... 180Indicator Tones...................... 181Alert Tones.............................181Switching Between Connect Plusand Non-Connect Plus Modes.....182Making and Receiving Callsin Connect Plus Mode...... 183Selecting a Site.................................183Roam Request....................... 183Site Lock On/Off.....................183Site Restriction.......................183Selecting a Zone...............................184Using Multiple Networks................... 184Selecting a Call Type........................185Receiving and Responding to aRadio Call.................................... 185Receiving and Respondingto a Group Call..................186Receiving and Respondingto a Private Call.................186Receiving a Site All Call.........187Receiving an InboundPrivate Phone Call............ 187Receiving an InboundPhone Talkgroup Call....... 188Inbound Phone Multi-GroupCall....................................189Making a Radio Call..........................189Making a Call ........................ 189Making a Private Call with aOne Touch Call Button......192Making a Call with theProgrammable ManualDial Button........................ 192Making an Outbound PrivatePhone Call with theProgrammable ManualDial Button........................ 193Making an Outbound PrivatePhone Call via the PhoneMenu................................. 194Contents8English
Making an Outbound PrivatePhone Call from Contacts. 194Waiting for the ChannelGrant in an OutboundPrivate Phone Call............ 195Making a Buffered Over-Dialin a ConnectedOutbound Private PhoneCall....................................196Making a Live Over-Dial in aConnected OutboundPrivate Phone Call............ 196Advanced Features inConnect Plus Mode.......... 197Auto Fallback.................................... 197Indications of Auto FallbackMode................................. 197Making/Receiving Calls inFallback Mode...................197Returning to NormalOperation.......................... 198Radio Check..................................... 198Sending a Radio Check......... 198Remote Monitor................................ 199Initiating Remote Monitor....... 200Scan..................................................201Starting and Stopping Scan... 201Responding to aTransmission During aScan..................................201User Configurable Scan....................202Turning Scan On or Off.....................202Editing the Scan List......................... 203Add or Delete a Group via the AddMembers Menu............................204Understanding Scan Operation.........206Scan Talkback.................................. 207Contacts Settings..............................207Making a Private Call fromContacts............................208Making a Call Alias Search.... 209Adding a New Contact........... 209Call Indicator Settings.......................210Activating and DeactivatingCall Ringers for Call Alert .210Activating and DeactivatingCall Ringers for PrivateCalls.................................. 210Activating and DeactivatingCall Ringers for TextMessage........................... 211Contents9English
Selecting a Ring Alert Type....212Configuring Vibrate Style....... 213Escalating Alarm ToneVolume..............................213Call Log Features..............................213Viewing Recent Calls............. 213Deleting a Call from a CallList.................................... 214Viewing Details from a CallList.................................... 214Call Alert Operation...........................215Receiving and Respondingto a Call Alert.................... 215Making a Call Alert from theContact List....................... 215Making a Call Alert with theOne Touch AccessButton................................216Emergency Operation.......................216Receiving an IncomingEmergency........................218Saving the EmergencyDetails to the Alarm List.... 219Deleting the EmergencyDetails............................... 219Responding to anEmergency Call.................219Responding to anEmergency Alert............... 220Initiating an Emergency Call.. 220Initiating an Emergency Callwith Voice to Follow.......... 221Initiating an Emergency Alert. 221Exiting Emergency Mode....... 222Text Message Features.................... 222Writing and Sending a TextMessage........................... 223Sending a Quick TextMessage........................... 224Sending a Quick TextMessage with the OneTouch Access Button........ 226Accessing the Drafts Folder...226Managing Fail-to-Send TextMessages..........................228Managing Sent TextMessages..........................230Receiving a Text Message.....233Reading a Text Message....... 233Managing Received TextMessages..........................234Privacy.............................................. 237Making a Privacy-Enabled(Scrambled) Call............... 238Contents10English
Covert Mode..................................... 238Entering Covert Mode............ 238Exiting Covert Mode...............238Security.............................................239Radio Disable.........................239Radio Enable..........................240Password Lock Features.................. 242Accessing the Radio fromPassword.......................... 242Turning the Password LockOn or Off........................... 242Unlocking the Radio fromLocked State..................... 243Changing the Password.........243Bluetooth Operation..........................244Turning Bluetooth On andOff..................................... 245Finding and Connecting to aBluetooth Device...............245Finding and Connectingfrom a Bluetooth Device(Discoverable Mode).........246Disconnecting from aBluetooth Device...............247Switching Audio Routebetween Internal RadioSpeaker and BluetoothDevice............................... 247Viewing Device Details...........247Editing Device Name..............248Deleting Device Name........... 248Bluetooth Mic Gain.................249Permanent BluetoothDiscoverable Mode........... 249Notification List..................................249Accessing the NotificationList.................................... 250Wi-Fi Operation.................................250Turning Wi-Fi On or Off..........250Connecting to a NetworkAccess Point..................... 251Refreshing the Network List...252Adding a Network...................252Viewing Details of NetworkAccess Points................... 253Removing Network AccessPoints................................ 253Utilities.............................................. 254Turning the Radio Tones/Alerts On or Off................. 254Turning Keypad Tones Onor Off................................. 255Contents11English
Setting the Tone AlertVolume Offset Level..........255Turning the Talk PermitTone On or Off.................. 256Setting the Power Level......... 256Changing the Display Mode...257Adjusting the DisplayBrightness......................... 258Setting the Display BacklightTimer.................................258Locking and Unlocking theKeypad..............................259Language............................... 259Turning the LED IndicatorOn or Off........................... 260Identifying Cable Type........... 260Voice Announcement.............261Wallpaper Mode.....................261Screen Saver Mode............... 262Audio Accessory.................... 262Auto Keypad Lock..................262Digital Mic AGC (Mic AGC-D)...................................... 263Intelligent Audio......................263Turning the AcousticFeedback SuppressorFeature On or Off..............265Text Entry Configuration........ 265Accessing General RadioInformation........................ 271Accessories..................................280Authorized AccessoriesList..................................... 281Antennas...........................................281Audio Accessories............................ 281Batteries............................................281Bluetooth...........................................281Cables...............................................282Carry Devices................................... 282Chargers........................................... 282Miscellaneous Accessories...............282Batteries and Chargers Warranty......... 283The Workmanship Warranty........................283The Capacity Warranty................................283Limited Warranty....................................284MOTOROLA COMMUNICATIONPRODUCTS........................................... 284I. WHAT THIS WARRANTY COVERSAND FOR HOW LONG:......................... 284Contents12English
II. GENERAL PROVISIONS:....................... 285III. STATE LAW RIGHTS:............................285IV. HOW TO GET WARRANTY SERVICE:.285V. WHAT THIS WARRANTY DOES NOTCOVER:..................................................286VI. PATENT AND SOFTWAREPROVISIONS:........................................ 286VII. GOVERNING LAW:...............................288Contents13English
Declaration of ConformityThis declaration is applicable to your radio only if your radio is labeled with the FCC logo shown below.Declaration of ConformityPer FCC CFR 47 Part 2 Section 2.1077(a)Responsible PartyName: Motorola Solutions, Inc.Address: 1303 East Algonquin Road, Schaumburg, IL 60196-1078, U.S.A.Phone Number: 1-800-927-2744Hereby declares that the product:Model Name: SL7550/ SL7580/SL7590/SL7550e/ SL7580e/SL7590econforms to the following regulations:FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a)Declaration of Conformity14English
Class B Digital DeviceAs a personal computer peripheral, this device complies with Part 15 of the FCC Rules. This device complies withIndustry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:1This device may not cause harmful interference, and2This device must accept any interference received, including interference that may cause undesired operation.Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuantto part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will not occur in a particular in-stallation.If this equipment does cause harmful interference to radio or television reception, which can be determinedby turning the equipment off and on, the user is encouraged to try to correct the interference by one ormore of the following measures:• Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio or TV technician for help.Declaration of Conformity15English
Appareil numérique de Classe BEn tant que périphérique d'ordinateur personnel, cet appareil est conforme aux stipulations de la partie 15 des rè-glements de la FCC. Cet appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. Son utilisation est assujettie aux deux conditions suivantes :1Cet appareil ne doit pas causer d'interférence nuisible.2Cet appareil doit accepter toute interférence reçue, y compris les interférences pouvant entraîner un fonction-nement indésirable.RemarqueCe matériel a fait l'objet de tests et a été déclaré conforme aux limites établies pour un appareil numériquede classe B, comme il est stipulé à la section 15 des règlements de la FCC. Ces limites sont fixées afind'offrir une protection suffisante contre des interférences nuisibles dans une installation résidentielle. Cematériel génère, utilise et peut émettre de l'énergie radiofréquence et, s'il n'est pas installé ni utilisé confor-mément aux instructions, il peut provoquer un brouillage nuisible aux communications radio. Cependant,on ne peut garantir qu'il n'y aura aucune interférence dans une installation particulière.Si cet appareil cause une interférence nuisible de la réception de la radio ou de la télévision, ce qui peutêtre déterminé en éteignant et en allumant l'appareil, vous êtes encouragé à remédier à la situation enprenant une ou plusieurs des mesures suivantes :•Réorienter ou déplacer l'antenne réceptrice.• Augmenter la distance entre l'équipement et le récepteur.• Brancher l'appareil dans une autre prise sur un circuit différent de celui du récepteur.• Consulter un revendeur ou un technicien radio/télévision chevronné pour obtenir de l'aide.Déclaration de conformitéFrançais(Canada)
Important Safety InformationRF Energy Exposure and Product Safety Guidefor Portable Two-Way RadiosATTENTION!This radio is restricted to Occupational use only.Before using the radio, read the RF Energy Exposureand Product Safety Guide for Portable Two-WayRadios which contains important operatinginstructions for safe usage and RF energy awarenessand control for Compliance with applicable standardsand Regulations.For a list of Motorola-approved antennas, batteries,and other accessories, visit the following website:http://www.motorolasolutions.comAny modification to this device, not expresslyauthorized by Motorola, may void the user’s authorityto operate this device.Under Industry Canada regulations, this radiotransmitter may only operate using an antenna of atype and maximum (or lesser) gain approved for thetransmitter by Industry Canada. To reduce potentialradio interference to other users, the antenna typeand its gain should be so chosen that the equivalentisotropically radiated power (e.i.r.p.) is not more thanthat necessary for successful communication.This radio transmitter has been approved by IndustryCanada to operate with Motorola-approved antennawith the maximum permissible gain and requiredantenna impedance for each antenna type indicated.Antenna types not included in this list, having a gaingreater than the maximum gain indicated for thattype, are strictly prohibited for use with this device.Important Safety Information16English
Consignes de sécurité importantesRadios bidirectionnelles portatives : expositionaux radiofréquences et sécurité du produitATTENTION!Cette radio ne doit être utilisée qu'à des finsprofessionnelles. Avant d'utiliser la radio, lisez leguide Radios bidirectionnelles portatives : expositionaux radiofréquences et sécurité du produit, quicontient d'importantes instructions de fonctionnementpour une utilisation sécuritaire et des informations surl'exposition aux fréquences radioélectriques, dans lebut d’assurer votre conformité aux normes etrèglements en vigueur.Visitez le site Web suivant pour obtenir la liste desantennes, des batteries et des autres accessoiresapprouvés par Motorola :http://www.motorolasolutions.comToute modification effectuée à cet appareil sansl'autorisation explicite de Motorola peut annulerl'autorisation d'utiliser cet appareil.Selon la réglementation d'Industrie Canada, cetémetteur radio ne peut être utilisé qu'avec uneantenne dont le type et le gain maximal (ou minimal)sont approuvés par Industrie Canada pour cetémetteur. Afin de limiter les interférences radio pourles autres utilisateurs, le type et le gain de l'antennedoivent être choisis de façon à ce que la puissanceisotrope rayonnée équivalente (P.I.R.E.) ne soit pasplus forte qu'il ne le faut pour établir lacommunication.Cet émetteur radio a été approuvé par IndustrieCanada pour utilisation avec une antenne approuvéepar Motorola offrant le gain maximal autorisé etl'impédance requise pour le type d'antenne indiqué. Ilest strictement interdit d'utiliser avec cet appareil touttype d'antenne ne figurant pas dans cette liste etprésentant un gain supérieur au maximum indiquépour le type.Consignes de sécurité importantesEnglish
Software VersionAll the features described in the following sections aresupported by the software version R02.50.00 or later.See Checking the Firmware Version and CodeplugVersion on page 170 to determine the softwareversion of your radio.Check with your dealer or system administrator formore details of all the features supported.Software Version17English
Version logicielleToutes les fonctions décrites dans les sectionssuivantes sont prises en charge par la versionR02.50.00 ou les versions ultérieures du logiciel de laradio.Consultez la section Checking the Firmware Version and Codeplug Version pour connaître la version logicielle de votre radio.Pour obtenir davantage de renseignements à proposdes fonctions prises en charge, adressez-vous àvotre détaillant ou à votre administrateur de système.Version logicielleEnglish
Computer Software CopyrightsThe Motorola products described in this manual mayinclude copyrighted Motorola computer programsstored in semiconductor memories or other media.Laws in the United States and other countriespreserve for Motorola certain exclusive rights forcopyrighted computer programs including, but notlimited to, the exclusive right to copy or reproduce inany form the copyrighted computer program.Accordingly, any copyrighted Motorola computerprograms contained in the Motorola productsdescribed in this manual may not be copied,reproduced, modified, reverse-engineered, ordistributed in any manner without the express writtenpermission of Motorola. Furthermore, the purchase ofMotorola products shall not be deemed to grant eitherdirectly or by implication, estoppel, or otherwise, anylicense under the copyrights, patents or patentapplications of Motorola, except for the normal non-exclusive license to use that arises by operation oflaw in the sale of a product.The AMBE+2™ voice coding Technology embodied inthis product is protected by intellectual property rightsincluding patent rights, copyrights and trade secretsof Digital Voice Systems, Inc.This voice coding Technology is licensed solely foruse within this Communications Equipment. The userof this Technology is explicitly prohibited fromattempting to decompile, reverse engineer, ordisassemble the Object Code, or in any other wayconvert the Object Code into a human-readable form.U.S. Pat. Nos. #5,870,405, #5,826,222, #5,754,974,#5,701,390, #5,715,365, #5,649,050, #5,630,011,#5,581,656, #5,517,511, #5,491,772, #5,247,579,#5,226,084 and #5,195,166.Computer Software Copyrights18English
Handling PrecautionsThe MOTOTRBO Series Digital Portable radio meetsIP54 specifications, allowing the radio to withstandadverse field conditions such as being exposed towater or dust.•Keep your radio clean and exposure to watershould be avoided to help ensure properfunctionality and performance.• To clean the exterior surfaces of the radio, use adiluted solution of mild dishwashing detergent andfresh water (i.e. one teaspoon of detergent to onegallon of water).• These surfaces should be cleaned whenever aperiodic visual inspection reveals the presence ofsmudges, grease, and/or grime.Caution:The effects of certain chemicals and theirvapors can have harmful results on certainplastics. Avoid using aerosol sprays, tunercleaners and other chemicals.Handling Precautions19English
RF Energy Exposure and ProductSafety Guidelines and InstructionsFor more detailed proper usage instructions,warnings and cautions, refer to the RF EnergyExposure and Product Safety Guide for PortableTwo-Way Radios booklet.• To ensure a comfortable audio level andcompliance with RF energy exposure limits, do nothold the radio against the ear or alongside thehead.• Use only in front of the face or with MotorolaSolutions approved audio accessories and carrycases to ensure compliance with RF energyexposure limits.RF Energy Exposure and Product Safety Guidelines andInstructions20English
Getting StartedHow to Use This GuideThis User Guide covers the basic operation of theMOTOTRBO Portables.However, your dealer or system administrator mayhave customized your radio for your specific needs.Check with your dealer or system administrator formore information.For features that are available in both conventionalAnalog and Digital modes, no icon is shown.Conventional Analog Mode-Only features are notavailable in Connect Plus mode of operation. See Connect Plus Operations on page 173 for moreinformation.For features that are available in a conventional multi-site mode, see IP Site Connect on page 43 for moreinformation.Selected features are also available on the single-sitetrunking mode, Capacity Plus. See Capacity Plus onpage 44 for more information.Selected features are also available in the multi-sitetrunking mode, Linked Capacity Plus. See LinkedCapacity Plus on page 44 for more information.What Your Dealer/System Administrator CanTell YouYou can consult your dealer or system administratorabout the following:• Is your radio programmed with any presetconventional channels?•Which buttons have been programmed to accessother features?• What optional accessories may suit your needs?• What are the best radio usage practices foreffective communication?• What maintenance procedures will help promotelonger radio life?Getting Started21English
Preparing Your Radio for UseCharging the BatteryYour radio is powered by a Lithium-Ion (Li-lon)battery. To avoid damage and to ensure compliancewith warranty terms, charge the battery using aMotorola charger exactly as described in the chargeruser guide. All chargers can charge only Motorolaauthorized batteries. Other batteries may not charge.It is recommended your radio remains powered offwhile charging.Charge a new battery 14 to 16 hours before initialuse for best performance. Prior to charging abattery with the radio, it is recommended to turnthe radio off. Batteries charge best at roomtemperature. The battery charging icon will be displayed untilthe user unplugs the USB cable or takes the radioout of the charger.Preparing Your Radio for Use22English
Attaching the Battery1Align the battery contacts with the contacts insidethe battery compartment. Insert the contact side ofthe battery first. Gently push the battery into place.122To attach battery cover, align it in place and slidethe battery latch ( ) until it snaps into place. Slidebattery latch into lock position.12A3Attaching the Earpiece/Audio AccessoryThe audio jack ( ) is located on the antenna side ofthe radio. It is used to connect accessories to theradio.A1Lift the flap of the Audio Jack cover. Align theindicators ( ) on both the connector and housing,then push until it fits in properly.2Rotate connector clockwise or counterclockwise tolock.3To unlock, rotate until the indicators ( ) on boththe connector and housing are aligned. Pull outthe connector gently to disconnect from radio.Preparing Your Radio for Use23English
BPowering Up the RadioABPress the On/Off button ( ) on the front keypad. Yousee a welcome message or welcome image.The LED lights up solid green ( ) and the Homescreen lights up if the backlight setting is set to turnon automatically.The backlight depends on the lastbrightness setting.Adjusting the VolumeAIncrease the volume by pushing the Volume Button() up.Decrease the volume by pushing the Volume Buttondown.Note:Your radio can be programmed to have aminimum volume offset where the volumelevel cannot be lowered past the programmedminimum volume. Check with your dealer orsystem administrator for more information.Preparing Your Radio for Use24English
Identifying Radio ControlsRadio Controls5943782115111210614131LED Indicator2Push-to-Talk (PTT) Button3Display4Microphone5Volume Button6Front Button P1[1]7On/Off/Information Button8Emergency Button[1]94-way Navigation Disc10 Antenna11 Speaker12 Front Button P2[1]13 Back/Home Button14 Menu/OK Button15 Keypad1These buttons are programmable.Identifying Radio Controls25English
Using the 4-Way Navigation DiscYou can use the 4-way navigation disc,, to scroll through options,increase/decrease values, and navigate vertically.Category Direction or or Menu Vertical Naviga-tion-Lists Vertical Naviga-tion-View Details Vertical Naviga-tionPrevious/NextItemNumeric Values Increase/Decrease-You can use the 4-way navigation disc, , as anumber, alias, or free form text editor.The button can be used to change the channels inthe home screen.Press to select your desired channel.Editor Catego-ryDirection or or Number - -Alias - Move cursorone characterleft/right.Free Form Text Move cursor up/downMove cursorone characterleft/right.Identifying Radio Controls26English
Using the KeypadYou can use the 3 x 4 alphanumeric keypad to access your radio’s features. You can use the keypad to entersubscriber aliases or IDs, and text messages. Many characters require that you press a key multiple times. The nexttable shows the number of times a key needs to be pressed to generate the required character.Key Number of Times Key is Pressed1 2 3 4 5 6 7 8 9 10 11 12 131 . , ? ! @ & ' % — : * #A B C 2D E F 3G H I 4J K L 5M N O 6P Q R S 7T U V 8Identifying Radio Controls27English
Key Number of Times Key is Pressed1 2 3 4 5 6 7 8 9 10 11 12 13W X Y Z 90Note:Press to enter “0” and long press to activate the CAPS lock. Another long press to turn offthe CAPS lock.* ordel Note:Press during text entry to delete the character. Press during numeric entry to enter a “*”.# orspace Note:Press during text entry to insert a space. Press during numeric entry to enter a “#”. Longpress to change text entry method.Identifying Radio Controls28English
Non-Connect Plus OperationsNon-Connect Plus Operations29English
Additional Radio Controls in Non-Connect Plus ModePush-To-Talk (PTT) ButtonThe PTT button on the side of the radio ( ) servestwo basic purposes:A• While a call is in progress, the PTT button allowsthe radio to transmit to other radios in the call.Press and hold the PTT button to talk. Release thePTT button to listen.The microphone is activated when the PTT buttonis pressed.•While a call is not in progress, the PTT button isused to make a new call (see Making a Radio Callon page 51).If the Talk Permit Tone (see Turning the Talk PermitTone On or Off on page 149) is enabled, wait untilthe short alert tone ends before talking.During a call, if the Channel Free Indication feature isenabled on your radio (programmed by your dealer),you will hear a short alert tone the moment the targetradio (the radio that is receiving your call) releasesthe PTT button, indicating the channel is free for youto respond.You will also hear a continuous talk prohibit tone, ifyour call is interrupted, indicating that you shouldrelease the PTT button, for example when the radioreceives an Emergency Call.Programmable ButtonsYour dealer can program the programmable buttonsas shortcuts to radio functions depending on theduration of a button press:Short press Pressing and releasing rapidly.Additional Radio Controls in Non-Connect Plus Mode30English
Long press Pressing and holding for theprogrammed duration.Press and hold Keeping the button pressed.Note:The programmed duration of a button press isapplicable for all assignable radio/utilityfunctions or settings. See EmergencyOperation on page 95 for more informationon the programmed duration of theEmergency button.Assignable Radio FunctionsActions A programmable button toaccess a CPS programmableaction list.Audio Ambience Allows the user to select anenvironment the radio isoperating in.Audio Profiles Allows the user to select thepreferred audio profile.Audio Routing Toggles audio routingbetween internal and externalspeakers.Audio Toggle Toggles audio routingbetween the internal radiospeaker and the speaker ofwired accessory.Bluetooth® AudioSwitchToggles audio routingbetween internal radiospeaker and externalBluetooth-enabled accessory.Contacts Provides direct access to theContacts list.Call Alert Provides direct access to thecontacts list for you to select acontact to whom a Call Alertcan be sent.Call Log Selects the call log list.ChannelAnnouncementPlays zone and channelannouncement voicemessages for the currentchannel.Display RadioAliasShows radio display name.Additional Radio Controls in Non-Connect Plus Mode31English
Emergency Depending on theprogramming, initiates orcancels an emergency.Intelligent Audio Toggles intelligent audio on oroff.Job Tickets Allows the user to view andact upon job tickets.Manual Dial Depending on theprogramming, initiates aPrivate or Phone Call bykeying in any subscriber ID orphone number.Manual SiteRoam[2]Starts the manual site search.Mic AGC On/Off Toggles the internalmicrophone automatic gaincontrol (AGC) on or off.Monitor Monitors a selected channelfor activity.Notifications Provides direct access to theNotifications list.Nuisance ChannelDelete[2]Temporarily removes anunwanted channel, except forthe Selected Channel, fromthe scan list. The SelectedChannel refers to the selectedzone or channel combinationof the user from which scan isinitiated.One Touch Access Directly initiates a predefinedPrivate, Phone or Group Call,a Call Alert or a Quick Textmessage.Option BoardFeatureToggles option boardfeature(s) on or off for optionboard-enabled channels.PermanentMonitor[2]Monitors a selected channelfor all radio traffic until functionis disabled.Phone Provides direct access to thePhone Contacts list.Power BatteryIndicatorDisplays the current status ofthe battery level.Privacy Toggles privacy on or off.Additional Radio Controls in Non-Connect Plus Mode32English
Radio Alias and ID Provides radio alias and ID.Radio Check Determines if a radio is activein a system.Radio Enable Allows a target radio to beremotely enabled.Radio Disable Allows a target radio to beremotely disabled.Remote Monitor Turns on the microphone of atarget radio without it givingany indicators.Repeater/Talkaround[2]Toggles between using arepeater and communicatingdirectly with another radio.Ring Alert Type Provides direct access to theRing Alert Type Setting.Scan[2] Toggles scan on or off.Site Info Displays current LinkedCapacity Plus site name andID. Plays site announcementvoice messages for thecurrent site (this function isunavailable when VoiceAnnouncement is disabled).Site Lock On/Off[2] When toggled on, the radiosearches the current site only.When toggled off, the radiosearches other sites inaddition to the current site.Telemetry Control Controls the Output Pin on alocal or remote radio.Text Message Selects the text messagemenu.Transmit InterruptRemote Dekey Stops an ongoing interruptiblecall to free the channel.Trill EnhancementOn/OffToggles trill enhancement onor off.Unassigned Unassigned programmablebutton.VoiceAnnouncementOn/OffToggles voice announcementon or off.Additional Radio Controls in Non-Connect Plus Mode33English
Voice OperatingTransmission(VOX)Toggles VOX on or off.Zone Allows selection from a list ofzones.Assignable Settings or Utility FunctionsAll Tones/AlertsToggles all tones and alerts on oroff.Brightness Allows brightness to be set via themanual brightness mode or autobrightness control via the radio’sphoto sensor.Display Mode Toggles the day/night displaymode on or off.Wallpaper Displayed on home screen.Accessing the Programmed FunctionsYou can access various radio functions through oneof the following ways:• A short or long press of the relevantprogrammable buttons.• Use the 4-Way Navigation Disc as follows:1Press to access the menu. Press theappropriate Menu Scroll button ( or ) toaccess the menu functions.2To select a function or enter a sub-menu, pressthe button.3To go back one menu level, or to return to theprevious screen, press the button. Long2Not applicable in Capacity Plus and Linked Capacity PlusAdditional Radio Controls in Non-Connect Plus Mode34English
press the button to return to the Homescreen.Note:Your radio automatically exits the menuafter a period of inactivity and returns toyour Home screen.Identifying Status IndicatorsDisplay IconsYour radio has a 2 inch landscape display with QVGA(Quarter Video Graphics Array) 16-bit colorresolution.The following are icons that appear on the display ofthe radio. Icons are displayed arranged left-most inorder of appearance/usage.Received Signal Strength Indicator(RSSI)The number of bars displayed repre-sents the radio signal strength. Fourbars indicate the strongest signal. Thisicon is only displayed while receiving.MonitorSelected channel is being monitored.Bluetooth Not ConnectedThe Bluetooth feature is enabled butthere is no remote Bluetooth device con-nected.Bluetooth ConnectedThe Bluetooth feature is enabled. Theicon stays lit when a remote Bluetoothdevice is connected.Sign InRadio is signed in to the remote server.Sign OutRadio is signed out of the remote server.High Volume DataRadio is receiving high volume data andchannel is busy.Additional Radio Controls in Non-Connect Plus Mode35English
Job Ticket NotificationNotification List has items to review.Option BoardThe Option Board is enabled. (Optionboard enabled models only)Option Board Non-FunctionThe Option Board is disabled.Over-the-Air Programming Delay Tim-erIndicates time left before automatic re-start of radio.Scan[3][4]Scan feature is enabled.Scan- Priority 1[3][4]Radio detects activity on channel/groupdesignated as Priority 1.Scan- Priority 2[3][4]Radio detects activity on channel/groupdesignated as Priority 2.Flexible Receive ListFlexible receive list is enabled.EmergencyRadio is in Emergency mode.SecureThe Privacy feature is enabled.UnsecureThe Privacy feature is disabled.Site Roaming[3]The site roaming feature is enabled.Talkaround[3][4]Additional Radio Controls in Non-Connect Plus Mode36English
In the absence of a repeater, radio iscurrently configured for direct radio to ra-dio communication.BatteryThe number of bars (0 – 4) shown indi-cates the charge remaining in the bat-tery. Blinks when the battery is low.Battery Charging StatusShows battery discharging status.All Tones DisabledNo ring tones available.Call LogRadio call log.ContactRadio contact is available.MessageIncoming message.Silent RingSilent ring mode is enabled.Ring OnlyRinging mode is enabled.VibrateVibrate mode is enabled.Vibrate and RingVibrate and Ring mode is enabled.Wi-Fi Excellent[5]Wi-Fi signal is excellent.Wi-Fi Good[5]Wi-Fi signal is good.Wi-Fi Average[5]Wi-Fi signal is average.Additional Radio Controls in Non-Connect Plus Mode37English
Wi-Fi Poor[5]Wi-Fi signal is poor.Wi-Fi Unavailable[5]Wi-Fi signal is unavailable.Wi-Fi Excellent Highlighted[5]Wi-Fi signal is excellent. When youscroll to a network in the network list, theWi-Fi icon of that network is highlighted.Wi-Fi Good Highlighted[5]Wi-Fi signal is good. When you scroll toa network in the network list, the Wi-Fiicon of that network is highlighted.Wi-Fi Average Highlighted[5]Wi-Fi signal is average. When you scrollto a network in the network list, the Wi-Fiicon of that network is highlighted.Wi-Fi Poor Highlighted[5]Wi-Fi signal is poor. When you scroll toa network in the network list, the Wi-Fiicon of that network is highlighted.Wi-Fi Unavailable Highlighted[5]Wi-Fi signal is unavailable. When youscroll to a network in the network list, theWi-Fi icon of that network is highlighted.3Not applicable in Capacity Plus4Not applicable in Linked Capacity Plus5Only applicable for SL7550e/SL7590e/SL7580eAdditional Radio Controls in Non-Connect Plus Mode38English
Call IconsThe following icons appear on the radio’s displayduring a call. These icons also appear in the Contactslist to indicate ID type.Private CallIndicates a Private Call in progress.Group Call/All CallIndicates a Group Call or All Call inprogress.Phone Call as Private CallIndicates a Phone Call as Private Callin progress. In the Contacts list, it indi-cates a phone alias (name) or ID(number).Phone Call as Group/All CallIndicates a Phone Call as Group/AllCall in progress. In the Contacts list, itindicates a group alias (name) or ID(number).Bluetooth PC CallIndicates a Bluetooth PC Call in prog-ress. In the Contacts list, it indicates aBluetooth PC Call alias (name) or ID(number).Private Call AlertIn the Contacts list, it indicates a sub-scriber alias (name) or ID (number).Utilities IconsThe following icons appear beside menu items on theradio’s display that offer the following options.Checkbox (Empty)Indicates the option is not selected.Checkbox (Checked)Indicates the option is selected.BrightnessIndicates the brightness level.Additional Radio Controls in Non-Connect Plus Mode39English
Mini Notice IconsThe following icons appear momentarily on theradio’s display after an action to perform task istaken.Successful Transmission (Posi-tive)Successful action taken.Failed Transmission (Negative)Failed action taken.Transmission in Progress (Transi-tional)Transmitting. This is seen before indi-cation for Successful Transmission orFailed Transmission.Sent Item IconsThe following icons appear at the top right corner ofthe radio’s display in the Sent Items folder.ORSent SuccessfullyThe text message is sent successfully.ORIndividual or Group Message ReadThe text message has been read.ORIndividual or Group Message UnreadThe text message has not been read.ORSend FailedThe text message has not been sent.ORIn-Progress•The text message to a group alias or IDis pending transmission.Additional Radio Controls in Non-Connect Plus Mode40English
• The text message to a subscriber aliasor ID is pending transmission, followedby waiting for acknowledgement.Job Tickets IconsAll JobsIndicates all jobs listed.New JobsIndicates new jobs.LED IndicatorThe LED indicator ( ) shows the operational status ofyour radio.ABlinkingredRadio is transmitting at low batterycondition, receiving or sending anemergency transmission, has failed theself-test upon powering up, or hasmoved out of range if radio isconfigured with Auto-RangeTransponder System.SolidyellowRadio is monitoring a digitalconventional channel or in BluetoothDiscoverable Mode. Also indicates fairbattery charge when programmablebutton is pressed.BlinkingyellowRadio is scanning for activity orreceiving a Call Alert, flexible receiveAdditional Radio Controls in Non-Connect Plus Mode41English
list is enabled or all local LinkedCapacity Plus channels are busy.DoubleblinkingyellowRadio is no longer connected to therepeater while in Capacity Plus orLinked Capacity Plus; all Capacity Plusor Linked Capacity Plus channels arecurrently busy. Auto Roaming isenabled, radio is actively searching fora new site, or radio has yet to respondto a group call alert. Also indicates thatradio has yet to respond to a group callalert, or radio is locked.SolidgreenRadio is powering up or transmitting.Also indicates full charge of the batterywhen the programmable button ispressed.BlinkinggreenRadio is powering up, receiving a non-privacy-enabled call or data, ordetecting activity, or retrieving Over-the-Air Programming transmissionsover the air.RapidlyblinkinggreenRadio is receiving a privacy-enabledcall or data.Note:While in conventional mode, when the LEDblinks green, it indicates the radio detectsactivity over the air. Due to the nature of thedigital protocol, this activity may or may notaffect the radio's programmed channel.For Capacity Plus and Linked Capacity Plus,there is no LED indication when the radio isdetecting activity over the air.Alert TonesAlert tones provide you with audible indications of thestatus, or response to data received on the radio.Continuous Tone A monotone sound.Sounds continuously un-til termination.Periodic Tone Sounds periodically de-pending on the durationset by the radio. Tonestarts, stops, and repeatsitself.Repetitive Tone A single tone that re-peats itself until it is ter-minated by the user.Additional Radio Controls in Non-Connect Plus Mode42English
Momentary Tone Sounds only once for ashort period of time de-fined by the radio.Indicator TonesHigh pitched tone Low pitched tonePositive Indicator ToneNegative Indicator ToneIP Site ConnectThis feature allows your radio to extend conventionalcommunication beyond the reach of a single site, byconnecting to different available sites which areconnected via an Internet Protocol (IP) network.When the radio moves out of range from one site andinto the range of another, it connects to the new site'srepeater to send or receive calls/data transmissions.Depending on your settings, this is doneautomatically or manually.If the radio is set to do this automatically, it scansthrough all available sites when the signal from thecurrent site is weak or when the radio is unable todetect any signal from the current site. It then lockson to the repeater with the strongest Received SignalStrength Indicator (RSSI) value.In a manual site search, the radio searches for thenext site in the roam list that is currently in range (butwhich may not have the strongest signal) and lockson to it.Note:Each channel can only have either Scan orRoam enabled, not both at the same time.Channels with this feature enabled can be added to aparticular roam list. The radio searches the channel(s)in the roam list during the automatic roam operationto locate the best site.A roam list supports a maximum of 16 channels(including the Selected Channel).Note:You cannot manually add or delete an entry tothe roam list. Check with your dealer orsystem administrator for more information.Additional Radio Controls in Non-Connect Plus Mode43English
Capacity PlusCapacity Plus is a single-site trunking configuration ofthe MOTOTRBO radio system, which uses a pool ofchannels to support hundreds of users and up to 254Groups. This feature allows your radio to efficientlyutilize the available number of programmed channelswhile in Repeater Mode.You hear a negative indicator tone if you try to accessa feature not applicable to Capacity Plus via aprogrammable button press.Your radio also has features that are available inconventional digital mode, IP Site Connect, CapacityPlus and Linked Capacity Plus. However, the minordifferences in the way each feature works does notaffect the performance of your radio.Check with your dealer or system administrator formore information on this configuration.Linked Capacity PlusLinked Capacity Plus is a multi-site multi-channeltrunking configuration of the MOTOTRBO radiosystem, combining the best of both Capacity Plus andIP Site Connect configurations.Linked Capacity Plus allows your radio to extendtrunking communication beyond the reach of a singlesite, by connecting to different available sites whichare connected via an Internet Protocol (IP) network. Italso provides an increase in capacity by efficientlyutilizing the combined available number ofprogrammed channels supported by each of theavailable sites.When the radio moves out of range from one site andinto the range of another, it connects to the new site'srepeater to send or receive calls/data transmissions.Depending on your settings, this is doneautomatically or manually.If the radio is set to do this automatically, it scansthrough all available sites when the signal from thecurrent site is weak or when the radio is unable todetect any signal from the current site. It then lockson to the repeater with the strongest Received SignalStrength Indicator (RSSI) value.In a manual site search, the radio searches for thenext site in the roam list that is currently in range (butwhich may not have the strongest signal) and lockson to it.Any channel with Linked Capacity Plus enabled canbe added to a particular roam list. The radio searchesAdditional Radio Controls in Non-Connect Plus Mode44English
these channels during the automatic roam operationto locate the best site.Note:You cannot manually add or delete an entry tothe roam list. Check with your dealer orsystem administrator for more information.Similar to Capacity Plus, icons of features notapplicable to Linked Capacity Plus are not availablein the menu. You hear a negative indicator tone if youtry to access a feature not applicable to LinkedCapacity Plus via a programmable button press.Check with your dealer or system administrator formore information on this configuration.Additional Radio Controls in Non-Connect Plus Mode45English
Making and Receiving Calls in Non-Connect Plus ModeSelecting a ZoneA zone is a group of channels. Your radio supports upto 250 zones, with a maximum of 160 channels perzone.1Access the Zone feature.Radio Con-trolsStepsProgrammedZone buttonPress the programmed Zonebutton.Radio menu 1 to access the menu.2 or to Zone andpress to select.The current zone is displayed and indicated by a.2Select the required zone.RadioCon-trolSteps or or and scroll to the requiredzone.Key-pad 1Enter the first character of the re-quired zone.2A blinking cursor appears allowingyou to continue entering the subse-quent characters of the requiredzone.Note:Press to move one space tothe left. Press to move onespace to the right. Press the key to delete any unwant-ed characters.Note:The first line of the displayshows the characters you keyedin. The second line shows azone that matches what youMaking and Receiving Calls in Non-Connect Plus Mode46English
RadioCon-trolStepshave already keyed in. The aliassearch is case-insensitive. Ifthere are two or more with thesame name, the radio displaysthe zone that is listed first in thezone list.3Press to select.The display shows <Zone> Selectedmomentarily and returns to the selected zonescreen.Selecting a ChannelTransmissions are sent and received on a channel.Depending on your radio’s configuration, eachchannel may have been programmed differently tosupport different groups of users or supplied withdifferent features. After selecting the relevant Zone,select the relevant channel you require to transmit orreceive on.On the navigation disc, press to access theChannel List (while on the Home Screen). Theactive channel is displayed and indicated by a .Receiving and Responding to a Radio CallOnce the channel, subscriber ID, or group ID isdisplayed, you can proceed to receive and respond tocalls.The LED lights up solid green while the radio istransmitting and blinks green when the radio isreceiving.Note:The LED lights up solid green while the radiois transmitting and blinks greenrapidly whenthe radio is receiving a privacy-enabled call.To unscramble a privacy-enabled call, yourradio must have the same Privacy Key, ORthe same Key Value and Key ID (programmedMaking and Receiving Calls in Non-Connect Plus Mode47English
by your dealer), as the transmitting radio (theradio you are receiving the call from).See Privacy on page 121 for moreinformation.Receiving and Responding to a Group CallTo receive a call from a group of users, your radiomust be configured as part of that group.When you receive a Group Call (while on the Homescreen), the LED blinks green. The first line of thedisplay shows the caller alias, and the RSSI icon. Thesecond line displays the group alias and the GroupCall icon (in Digital mode only). Your radio unmutesand the incoming call sounds through the radio'sspeaker.1Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.• If the Channel Free Indication feature isenabled, you hear a short alert tone themoment the transmitting radio releases thePTT button, indicating the channel is free foryou to respond. Press the PTT button torespond.• If the Voice Interrupt feature is enabled, pressthe PTT button to stop the current call from thetransmitting radio and free the channel for youto talk/respond.The LED lights up solid green.2Wait for one of the following tones to finish (ifenabled), and speak clearly into the microphone.• The Talk Permit Tone•The PTT Sidetone3Release the PTT button to listen.If there is no voice activity for a predetermined periodof time, the call ends.Note:See Making a Group Call on page 52 fordetails on making a Group Call.If the radio receives a Group Call while not onthe Home screen, it remains on its currentscreen prior to answering the call.Long press the button to go to theHome screen to view the caller alias beforereplying.Making and Receiving Calls in Non-Connect Plus Mode48English
Receiving and Responding to a Private CallA Private Call is a call from an individual radio toanother individual radio.When you receive a Private Call, the LED blinksgreen. The first line of the display shows thesubscriber alias or ID, and the RSSI icon. The secondline displays Private Call and the Private Call icon.Your radio unmutes and the incoming call soundsthrough the speaker of the radio.1Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.• If the Channel Free Indication feature isenabled, you hear a short alert tone themoment the transmitting radio releases thePTT button, indicating the channel is free foryou to respond. Press the PTT button torespond.• If the Voice Interrupt feature is enabled, pressthe PTT button to stop the current call from thetransmitting radio and free the channel for youto talk/respond.The LED lights up solid green.2Wait for the Talk Permit Tone to finish (if enabled),and speak clearly into the microphone.3Release the PTT button to listen.If there is no voice activity for a predetermined periodof time, the call ends.The display shows Call Ended.See Making a Private Call on page 53 for details onmaking a Private Call.Receiving an All CallAn All Call is a call from an individual radio to everyradio on the channel. It is used to make importantannouncements requiring the user’s full attention.When you receive an All Call, a tone sounds and theLED blinks green.The first line of the display shows the caller alias, andthe RSSI icon. The second line displays All Calland the All Call icon. Your radio unmutes and theincoming call sounds through the radio speaker.Once the All Call ends, the radio returns to theprevious screen before receiving the call. An All Calldoes not wait for a predetermined time before ending.Making and Receiving Calls in Non-Connect Plus Mode49English
If the Channel Free Indication feature is enabled, youhear a short alert tone the moment the transmittingradio releases the PTT button, indicating the channelis now available for use.You cannot respond to an All Call.Note:See Making an All Call on page 54 fordetails on making an All Call.Note:The radio stops receiving the All Call if youswitch to a different channel while receivingthe call. During an All Call, you will not be ableto use any programmed button functions untilthe call ends.Receiving and Responding to a Phone CallPhone Call as Private CallWhen you receive a Phone Call as a Private Call, thePhone Call icon appears in the top right corner; thedisplay shows the caller alias or Phone Call.If Phone Call capability is not enabled on your radio,the first line of the display shows Unavailable andyour radio mutes the call. Your radio returns to theprevious screen when the call ends.1Press the PTT button to talk and release it tolisten.2Press to end the call.The display shows Ending Phone Call.If successful, a tone sounds and the display showsAll Call and Call Ended.If successful, a tone sounds and the display showsCall Ended.If unsuccessful, your radio returns to the PhoneCall screen. Repeat this step to end the call.Phone Call as Group CallWhen you receive a Phone Call as a Group Call,1Press the PTT button to talk and release it tolisten.2Press to end the call.The display shows Ending Phone Call.Making and Receiving Calls in Non-Connect Plus Mode50English
If successful, a tone sounds and the display showsAll Call and Call Ended.If unsuccessful, your radio returns to the PhoneCall screen. Repeat this step to end the call.Phone Call as All CallWhen you receive a Phone Call as an All Call, thePhone Call icon appears in the top right corner; thedisplay shows All Call and Phone Call.If Phone Call capability is not enabled on your radio,the first line of the display shows Unavailable andyour radio mutes the call.Note:When you receive a Phone Call as an All Call,you can respond to the call or end the call,only if an All Call type is assigned to thechannel.1Press the PTT button to talk and release it tolisten.2Press to end the call.The display shows Ending Phone Call.If successful, a tone sounds and the display showsAll Call and Call Ended.If unsuccessful, your radio returns to the PhoneCall screen. Repeat this step to end the call.Making a Radio CallAfter selecting your channel, you can select asubscriber alias or ID, or group alias or ID by using:• The PTT button.• A programmed One Touch Access button – TheOne Touch Access feature allows you to make aGroup or Private Call to a predefined ID easily.This feature can be assigned to a short or longprogrammable button press. You can ONLY haveone ID assigned to a One Touch Access button.Your radio can have multiple One Touch Accessbuttons programmed.• The programmed number keys – This method isfor Group, Private and All Calls only and is usedwith the keypad (see Making a Group, Private orAll Call with the Programmable Number Key onpage 57).Making and Receiving Calls in Non-Connect Plus Mode51English
• A programmable button – This method is forPhone Calls only (see Making a Phone Call withthe Programmable Phone Button on page 58).• The Contacts list (see Contact Settings on page75). • Manual Dial – This method is for Private andPhone Calls only and is dialed using the keypad(see Making a Private Call from Contacts on page77, and Making a Call with the ProgrammableManual Dial Button on page 60).Note:Your radio must have the Privacy featureenabled on the channel to send a privacy-enabled transmission. Only target radios withthe same Privacy Key OR the same Key Valueand Key ID as your radio will be able tounscramble the transmission.Note:See Privacy on page 121 for moreinformation.Making a Group CallTo make a call to a group of users, your radio mustbe configured as part of that group.1Do one of the following.• Select the channel with the active group aliasor ID. See Selecting a Channel on page 47.• Press the programmed One Touch Accessbutton.2Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.3Press the PTT button to make the call.The LED lights up solid green. The Group Callicon appears in the top right corner. The first textline shows the group call alias.4Wait for the Talk Permit Tone to finish (if enabled),and speak clearly into the microphone.5Release the PTT button to listen.When the target radio responds, the LED blinksgreen, the radio unmutes and the responsesounds through the radio’s speaker. You see theGroup Call icon, the group alias or ID, andtransmitting radio alias or ID on your display.6If the Channel Free Indication feature is enabled,you hear a short alert tone the moment theMaking and Receiving Calls in Non-Connect Plus Mode52English
transmitting radio releases the PTT button,indicating the channel is free for you to respond.Press the PTT button to respond.If there is no voice activity for a predeterminedperiod of time, the call ends. Radio returns to thescreen you were on prior to initiating the call.Making a Private Call While you can receive and/or respond to a PrivateCall initiated by an authorized individual radio, yourradio must be programmed for you to initiate a PrivateCall.There are two types of Private Calls. The first type,where a radio presence check is performed prior tosetting up the call, while the other sets up the callimmediately.Only one of these call types can be programmed toyour radio by your dealer.You will hear a negative indicator tone, when youmake a Private Call via the One Touch Accessbutton, the programmed number keys, or the ScrollUp/Down buttons, if this feature is not enabled.Use the Text Message or Call Alert features tocontact an individual radio. See Text MessageFeatures on page 102 or Call Alert Operation onpage 93 for more information.1Do one of the following.• Select the channel with the active subscriberalias or ID. See Selecting a Channel on page47.• Press the programmed One Touch Accessbutton.2Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.3Press the PTT button to make the call.If you release the PTT button while the radio issetting up the call, it exits without any indicationand returns to the previous screen.The LED lights up solid green., the radio unmutesand the response sounds through the radio’sspeaker. The Private Call icon appears on the topright corner. The first text line shows thesubscriber alias. The second text line displays thecall status.4Wait for the Talk Permit Tone to finish (if enabled),and speak clearly into the microphone.Making and Receiving Calls in Non-Connect Plus Mode53English
5Release the PTT button to listen.When the target radio responds, the LED blinksgreen, the radio unmutes and the responsesounds through the radio's speaker.6If the Channel Free Indication feature is enabled,you hear a short alert tone the moment thetransmitting radio releases the PTT button,indicating the channel is free for you to respond.Press the PTT button to respond.If there is no voice activity for a predeterminedperiod of time, the call ends. You hear a shorttone. The display shows Call Ended.Your radio may be programmed to perform a radiopresence check prior to setting up the Private Call. Ifthe target radio is not available, you hear a short toneand see negative mini notice on the display.Making an All CallThis feature allows you to transmit to all users on thechannel. Your radio must be programmed to allowyou to use this feature.Users on the channel cannot respond to an All Call.1Select the channel with the active All Call groupalias or ID. See Selecting a Channel on page 47.2Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.3Press the PTT button to make the call.The LED lights up solid green.The Group Call iconappears in the top right corner. The first text lineshows All Call.4Wait for the Talk Permit Tone to finish (if enabled),and speak clearly into the microphone.Making a Phone Call with the One Touch AccessButton1Press the programmed One Touch Accessbutton to make a Phone Call to the predefinedalias or ID.If the entry for the One Touch Access button isempty, a negative indicator tone sounds. If theaccess code was not preconfigured in theContacts list, the display shows Access Code:.Enter the access code and press to proceed.Making and Receiving Calls in Non-Connect Plus Mode54English
The LED lights up solid green. The Phone Callicon appears in the top right corner. The first textline shows the subscriber alias. The second textline displays the call status.If the call-setup is successful, the DTMF tonesounds. You hear the dialing tone of the telephoneuser. The first text line shows the subscriber alias.The Phone Call icon remains in the top rightcorner.If the call-setup is unsuccessful, a tone soundsand the display shows Phone Call Failed. Yourradio returns to the Access Code input screen. Ifthe access code was preconfigured in theContacts list, the radio returns to the screen youwere on prior to initiating the call.2Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.3Press the PTT button to talk and release it tolisten.To enter extra digits, if requested by the PhoneCall, enter the extra digits using the keypad andpress to proceed.The DTMF tone sounds with each keypad press,and the radio returns to the previous screen.4Press to end the call.If de-access code was not preconfigured in theContacts list, the display shows De-AccessCode:. Press the One Touch Access button, if itis programmed with the de-access code. If theentry for the One Touch Access button is empty,a negative indicator tone sounds.The DTMF tone sounds with each keypad press,and the display shows Ending Phone Call.If the end-call-setup is successful, a tone soundsand the display shows Call Ended.If the end-call-setup is unsuccessful, your radioreturns to the Phone Call screen. Repeat Step 4 orwait for the telephone user to end the call.Note:When the telephone user ends the call, atone sounds and the display shows CallEnded.Making and Receiving Calls in Non-Connect Plus Mode55English
If the call ends while you are entering theextra digits requested by the Phone Call,your radio returns to the screen you wereon prior to initiating the call.During channel access, press todismiss the call attempt. A tone sounds toindicate success.During the call, if you press the One TouchAccess button with the deaccess codepreconfigured or enter the deaccess codeas the input for extra digits, your radioattempts to end the call.The access or deaccess code cannot bemore than 10 characters.Making a Private Call with a One Touch Call ButtonNote:Programmable buttons press must be initiatedfrom the Home screen.The One Touch Call feature allows you to easilymake a Private Call to a pre-defined Private Call aliasor ID. This feature can be assigned to a short or longprogrammable button press.You can ONLY have one alias or ID assigned to aOne Touch Call button. Your radio can have multipleOne Touch Call buttons programmed.1Press the programmed One Touch Call button tomake a Private Call to the pre-defined Private Callalias or ID.2Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.3Press the PTT button to make the call.The LED lights up solid green.The display shows the Private Call alias or ID.4Wait for the Talk Permit Tone to finish (if enabled)and speak clearly into the microphone.5Release the PTT button to listen.When the target radio responds, the LED blinksgreen.6If the Channel Free Indication feature is enabled,you will hear a short alert tone the moment thetarget radio releases the PTT button, indicating theMaking and Receiving Calls in Non-Connect Plus Mode56English
channel is free for you to respond. Press the PTTbutton to respond.If there is no voice activity for a predeterminedperiod of time, the call ends.Making a Group, Private or All Call with theProgrammable Number KeyThe Programmable Number Key feature allows you tomake a Group, Private or All Call to a predefined aliasor ID easily. This feature can be assigned to all theavailable number keys on a keypad.You can ONLY have one alias or ID assigned to anumber key, but you can have more than one numberkey associated to an alias or ID.1Long press the programmed number key, whenyou are on the Home screen, to make a Group,Private or All Call to the predefined alias or ID.If the number key is not associated to an entry, anegative indicator tone sounds.2Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.3Press the PTT button to make the call.The LED lights up solid green, the radio unmutesand the response sounds through the radio’sspeaker. The Group/Private Call icon appears inthe top right corner. The first text line shows thecaller alias. The second text line displays eitherthe call status for a Private Call or All Call forAll Call.4Wait for the Talk Permit Tone to finish (if enabled),and speak clearly into the microphone.5Release the PTT button to listen.When the target radio responds, the LED blinksgreen, the radio unmutes and the responsesounds through the radio's speaker.6If the Channel Free Indication feature is enabled,you hear a short alert tone the moment thetransmitting radio releases the PTT button,indicating the channel is free for you to respond.Press the PTT button to respond.If there is no voice activity for a predeterminedperiod of time, the call ends. Radio returns to thescreen you were on prior to initiating the call.For a Private Call, you hear a short tone when thecall ends.Making and Receiving Calls in Non-Connect Plus Mode57English
See Assigning an Entry to a ProgrammableNumber Key on page 83 for details on assigningan entry to a number key on the keypad.Making a Phone Call with the Programmable PhoneButton1Press the programmed Phone button to enter intothe Phone Entry list.2 or to the required subscriber alias or ID,and press to select.If the access code was not preconfigured in theContacts list, the display shows Access Code:.Enter the access code and press the button toproceed.The LED lights up solid green. The Phone Callicon appears in the top right corner. The first textline shows the subscriber alias. The second textline displays the call status.If the call-setup is successful, the DTMF tonesounds. You hear the dialing tone of the telephoneuser. The first text line shows the subscriber alias.The Phone Call icon remains in the top rightcorner. The second text line displays the callstatus.If call-setup is unsuccessful, a tone sounds andthe display shows Phone Call Failed. Yourradio returns to the Access Code input screen. Ifthe access code was preconfigured in theContacts list, the radio returns to the screen youwere on prior to initiating the call.3Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.4Press the PTT button to talk and release it tolisten.5To enter extra digits, if requested by the PhoneCall, do one of the following.• Press any keypad key to begin the input of theextra digits. The first line of the display showsExtra Digits:. The second line of the displayshows a blinking cursor. Enter the extra digitsand press the button to proceed. TheDTMF tone sounds and the radio returns to theprevious screen.Making and Receiving Calls in Non-Connect Plus Mode58English
• Press One Touch Access button. The DTMFtone sounds. If the entry for the One TouchAccess button is empty, a negative indicatortone sounds.6Press to end the call.If deaccess code was not preconfigured in theContacts list, the first line of the display shows De-Access Code:. The second line of the displayshows a blinking cursor. Enter the deaccess codeand press the button to proceed. The radioreturns to the previous screen.The DTMF tone sounds and the display showsEnding Phone Call.If the end-call-setup is successful, a tone soundsand the display shows Call Ended.If the end-call-setup is unsuccessful, your radioreturns to the Phone Call screen. Repeat Steps 4and 6 or wait for the telephone user to end thecall.When you press PTT button while in the PhoneContacts screen, a tone sounds and the displayshows Press OK to Place Phone Call.When the telephone user ends the call, a tonesounds and the display shows Phone CallEnded.If the call ends while you are entering the extradigits requested by the Phone Call, your radioreturns to the screen you were on prior to initiatingthe call.Note:During channel access, press todismiss the call attempt and a tone sounds.During the call, when you press OneTouch Access button with the deaccesscode preconfigured or enter the deaccesscode as the input for extra digits, your radioattempts to end the call.Note:The access or deaccess code cannot bemore than 10 characters.Making and Receiving Calls in Non-Connect Plus Mode59English
Making a Call with the Programmable Manual DialButton Making a Private Call1Press the programmed Manual Dial button toenter into the Manual Dial screen.2 or to Radio Contact and press toselect.The display shows Number:.3Use the keypad to enter a subscriber alias.4Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.5Press the PTT button to make the call.The LED lights up solid green. The Private Callicon appears in the top right corner. The first textline shows the subscriber alias. The second textline displays the call status.6Wait for the Talk Permit Tone to finish (if enabled)and speak clearly into the microphone.7Release the PTT button to listen.When the target radio responds, the LED blinksgreen.8If the Channel Free Indication feature is enabled,you will hear a short alert tone the moment thetarget radio releases the PTT button, indicating thechannel is free for you to respond. Press the PTTbutton to respond.If there is no voice activity for a predeterminedperiod of time, the call ends. You hear a shorttone. The display shows Call Ended.Making a Phone Call1Press the programmed Manual Dial button toenter into the Manual Dial screen.2 or to Phone Contact and press toselect.The display shows Number:.3Use the keypad to enter a subscriber alias.If the access code was not preconfigured in theContacts list, the display shows Access Code:.Enter the access code and press the button toproceed.Making and Receiving Calls in Non-Connect Plus Mode60English
The LED lights up solid green. The Phone Callicon appears in the top right corner. The first textline shows the subscriber alias. The second textline displays the call status.If the call-setup is successful, the DTMF tonesounds. You hear the dialing tone of the telephoneuser. The first text line shows the subscriber alias.The Phone Call icon remains in the top rightcorner.If the call-setup is unsuccessful, a tone soundsand the display shows Phone Call Failed. Yourradio returns to the Access Code input screen. Ifthe access code was preconfigured in theContacts list, the radio returns to the screen youwere on prior to initiating the call.4Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.5Press the PTT button to talk and release it tolisten.6To enter extra digits, if requested by the PhoneCall, do one of the following.• Press any keypad key to begin the input of theextra digits. Enter the extra digits and press the button to proceed. The DTMF tone soundsand the radio returns to the previous screen.• Press One Touch Access button. The DTMFtone sounds. If the entry for the One TouchAccess button is empty, a negative indicatortone sounds.7Press to end the call.If deaccess code was not preconfigured in theContacts list, the display shows De-AccessCode:. Enter the deaccess code and press the button to proceed. The radio returns to theprevious screen.The DTMF tone sounds and the display showsEnding Phone Call.If the end-call-setup is successful, a tone soundsand the display shows Call Ended.If the end-call-setup is unsuccessful, your radioreturns to the Phone Call screen. Repeat Step 7 orwait for the telephone user to end the call.Making and Receiving Calls in Non-Connect Plus Mode61English
When you press PTT button while in the PhoneContacts screen, a tone sounds and the displayshows Press OK to Place Phone Call.When the telephone user ends the call, a tonesounds and the display shows Phone CallEnded.If the call ends while you are entering the extradigits requested by the Phone Call, your radioreturns to the screen you were on prior to initiatingthe call.Note:During channel access, press todismiss the call attempt and a tone sounds.Note:During the call, when you press OneTouch Access button with the deaccesscode preconfigured or enter the deaccesscode as the input for extra digits, your radioattempts to end the call.Note:The access or deaccess code cannot bemore than 10 characters.Stopping a Radio CallThis feature allows you to stop an ongoing Group orPrivate Call to free the channel for transmission. Forexample, when a radio experiences a “stuckmicrophone” condition where the PTT button isinadvertently pressed by the user.Your radio must be programmed to allow you to usethis feature.1Press the programmed Transmit InterruptRemote Dekey button, while on the relevantchannel.2Wait for acknowledgement.If successful, the radio sounds a positive indicatortone and the display shows Remote DekeySuccess, indicating that the channel is now free.If unsuccessful, the radio sounds a negativeindicator tone and the display shows RemoteDekey Failed.On the interrupted radio, the display shows CallInterrupted, and the radio sounds a negativeindicator tone until the PTT button is released, if it isMaking and Receiving Calls in Non-Connect Plus Mode62English
transmitting an interruptible call that is stopped viathis feature.TalkaroundYou can continue to communicate when yourrepeater is not operating, or when your radio is out ofthe repeater’s range but within talking range of otherradios.This is called “talkaround”.Note:This feature is not applicable in Capacity Plusand Linked Capacity Plus.The Talkaround setting is retained even afterpowering down.You can toggle between talkaround and repeatermodes by pressing the programmed Repeater/Talkaround button or using the radio menu asdescribed next.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Talkaround and press to select.You can also use or to change the selectedoption.5Press to enable/disable the Talkaround.The display shows beside Enabled.The disappears from beside Enabled.Monitoring FeaturesMonitoring a ChannelUse the Monitor feature to make sure a channel isclear before transmitting.This feature is not applicable in Capacity Plus andLinked Capacity Plus.1Press and hold the programmed Monitor buttonand listen for activity.Making and Receiving Calls in Non-Connect Plus Mode63English
The Monitor icon appears on the display and theLED lights up solid yellow. You hear radio activityor total silence, depending on how your radio isprogrammed. This indicates that the channel is inuse.2Press the PTT button to talk and release it tolisten.Permanent MonitorUse the Permanent Monitor feature to continuouslymonitor a selected channel for activity.Note:This feature is not applicable in Capacity Plusand Linked Capacity Plus.1Press the programmed Permanent Monitorbutton to activate permanent monitoring of thechannel.Radio sounds an alert tone, the LED lights up solidyellow, and the display shows PermanentMonitor On. The Monitor icon appears on thedisplay.2Press the programmed Permanent Monitorbutton to exit Permanent Monitor mode.Radio sounds an alert tone, the LED turns off, andthe display shows Permanent Monitor Off.Making and Receiving Calls in Non-Connect Plus Mode64English
Advanced Features in Non-ConnectPlus ModeRadio CheckIf enabled, this feature allows you to determine ifanother radio is active in a system without disturbingthe user of that radio. No audible or visual notificationis shown on the target radio.Sending a Radio Check1Access the Radio Check feature.RadioControlStepsPro-gram-med Ra-dioCheckbutton1Press the programmed RadioCheck button.2 or to the required subscrib-er alias or ID and press to se-lect.Menu 1 to access the menu.RadioControlSteps2 or to Contacts and press to select.3Use one of the steps describednext to select the required sub-scriber alias or ID:• Select the subscriber alias or IDdirectly.• or to the requiredsubscriber alias or ID andpress to select.•Use the Manual Dial menu.• or to Manual Dialand press to select.• or to Radio Numberand press to select.Advanced Features in Non-Connect Plus Mode65English
RadioControlSteps• If there was previously dialedID, the ID appears along witha blinking cursor. Else, thefirst line of the display showsRadio Number:; the secondline of the display shows ablinking cursor. Use the key-pad to edit/enter the ID, andpress to select.4 or to Radio Check andpress to select.The display shows transitional mini notice,indicating the request is in progress. The LEDlights up solid green.2Wait for acknowledgement.If the button is pressed when the radio iswaiting for acknowledgement, a tone sounds, andthe radio terminates all retries and exits RadioCheck mode.If Radio Check is successful, a positive indicatortone sounds and the display shows positive mininotice.If Radio Check is unsuccessful, a negativeindicator tone sounds and the display showsnegative mini notice.Radio returns to the subscriber alias or ID screen.Remote MonitorUse the Remote Monitor feature to turn on themicrophone of a target radio (subscriber alias or IDsonly). The green LED will blink once on the targetsubscriber. You can use this feature to monitor,remotely, any audible activity surrounding the targetradio.Your radio must be programmed to allow you to usethis feature.Initiating Remote Monitor1Access the Remote Monitor feature.Advanced Features in Non-Connect Plus Mode66English
RadioControlStepsProgram-med Re-mote Mon-itor Button1Press the programmed RemoteMonitor button.2 or to the required sub-scriber alias or ID and press to select.Menu 1 to access the menu2 or to Contacts andpress to select3Use one of the steps describednext to select the required sub-scriber alias or ID• select the subscriber alias orID directly• or to the requiredsubscriber alias or ID andpress to select.RadioControlSteps•use the Manual Dial menu• or to Manual Di‐al and press to select.• or to Radio Num‐ber and press to se-lect.• If there was previously di-aled ID, the ID appearsalong with a blinking cur-sor. Else, the first line ofthe display shows RadioNumber:; the second lineof the display shows ablinking cursor. Key in thesubscriber alias or ID andpress to select.4 or to Remote Mon. andpress to select.Advanced Features in Non-Connect Plus Mode67English
The display shows transitional mini notice,indicating the request is in progress. The LEDlights up solid green.2Wait for acknowledgement.If successful, a positive indicator tone sounds andthe display shows positive mini notice. Your radiostarts playing audio from the monitored radio for aprogrammed duration and display shows Rem.Monitor. Once the timer expires, the radio soundsan alert tone and the LED turns off.If unsuccessful, the radio sounds a negativeindicator tone the display shows negative mininotice.Scan ListsScan lists are created and assigned to individualchannels/groups. Your radio cycles through theprogrammed scan list for the current channel lookingfor voice activity. At each channel in the cycle theradio also cycles through the group list for thatchannel.Your radio can support up to 250 scan lists, with amaximum of 16 members in a list.You can add, delete, or prioritize channels by editinga scan list.You can attach a new scan list to your radio via FrontPanel Programming.Note:This feature is not applicable in Capacity Plusand Linked Capacity Plus.Viewing an Entry in the Scan List1 to access the menu.2 or to Scan and press to select.3 or to View/Edit List and press toselect.4Use or to view each member on the list.The Priority icon appears left of the member’salias, if set, to indicate whether the member is ona Priority 1 or Priority 2 channel list. You cannothave multiple Priority 1 or Priority 2 channels in ascan list.Advanced Features in Non-Connect Plus Mode68English
There is no Priority icon if priority is set to None.Viewing an Entry in the Scan List by Alias Search1 to access the menu.2 or to Scan and press to select.3 or to View/Edit List and press toselect.4Key in the first character of the required alias.A blinking cursor appears.5Use the keypad to type the required alias.Press to move one space to the left. Press tomove one space to the right. Press the keyto delete any unwanted characters.The first line of the display shows the charactersyou keyed in. The second line of the displayshows an alias that matches what you have keyedin.The alias search is case-insensitive. If there aretwo or more entries with the same name, the radiodisplays the entry that is listed first in the scan list.Editing the Scan ListAdding a New Entry to the Scan List1 to access the menu.2 or to Scan and press to select.3 or to View/Edit List and press toselect.4 or to Add Member and press to select.5Select the required alias or ID by performing oneof the following actions:RadioControlStepsRadioNaviga- or to the required alias or ID.Advanced Features in Non-Connect Plus Mode69English
RadioControlStepstion But-tonsKeypad Key in the first character of the re-quired alias.A blinking cursor appears.Press to move one space to the left.Press to move one space to theright. Press the key to deleteany unwanted characters. Long press to change the text entry meth-od.The first line of the display shows thecharacters you keyed in. The nextlines of the display show the short list-ed search results. The alias search iscase-insensitive. If there are two ormore aliases with the same name, theRadioControlStepsradio displays the alias that is listedfirst in the list.6Press to select.7 or to the required priority level and press to select.The display shows Entry Saved, followedimmediately by Add Another?.8Do one of the following:• or to Yes and press to select, andrepeat Steps 5 to 7.• or to No and press to save thecurrent list.Deleting an Entry from the Scan List1 to access the menu.Advanced Features in Non-Connect Plus Mode70English
2 or to Scan and press to select.3 or to View/Edit List and press toselect.4Select the required alias or ID by performing oneof the following actions:RadioControlStepsRadioNaviga-tion But-tons or to the required alias or ID.Keypad Key in the first character of the re-quired alias.A blinking cursor appears.Press to move one space to the left.Press to move one space to theright. Press the key to deleteany unwanted characters. Long pressRadioControlSteps to change the text entry meth-od.The first line of the display shows thecharacters you keyed in. The nextlines of the display show the short list-ed search results. The alias search iscase-insensitive. If there are two ormore aliases with the same name, theradio displays the alias that is listedfirst in the list.5Press to select.6 or to Delete and press to select.7Do one of the following:• or to Yes and press to delete entry.The display shows Entry Deleted.Advanced Features in Non-Connect Plus Mode71English
• or to No and press to return to theprevious screen.8Repeat Steps 4 to 7 to delete other entries.After deleting all required aliases or IDs, longpress to return to the Home screen.Setting and Editing Priority for an Entry in theScan List1 to access the menu.2 or to Scan and press to select.3 or to View/Edit List and press toselect.4Select the required alias or ID by performing oneof the following actions:RadioControlStepsRadioNaviga- or to the required alias or ID.RadioControlStepstion But-tonsKeypad Key in the first character of the re-quired alias.A blinking cursor appears.Press to move one space to the left.Press to move one space to theright. Press the key to deleteany unwanted characters. Long press to change the text entry meth-od.The first line of the display shows thecharacters you keyed in. The nextlines of the display show the short list-ed search results. The alias search iscase-insensitive. If there are two ormore aliases with the same name, theAdvanced Features in Non-Connect Plus Mode72English
RadioControlStepsradio displays the alias that is listedfirst in the list.5Press to select.6 or to Edit Priority and press toselect.7 or to the required priority level and press to select.The display shows Entry Saved before returningto the previous screen.Note:The Priority icon appears left of the nameof the member.There is no Priority icon if priority is set toNone.ScanWhen you start a scan, your radio cycles through theprogrammed scan list for the current channel lookingfor voice activity.The LED blinks yellow and you see the Scan icon onthe display.There are two ways of initiating scan:•Main Channel Scan (Manual): Your radio scansall the channels/groups in your scan list. Onentering scan, your radio may (depending on thesettings) automatically start on the last scanned“active” channel/group or on the channel wherescan was initiated.•Auto Scan (Automatic): Your radio automaticallystarts scanning when you select a channel/groupthat has Auto Scan enabled.Note:This feature is not applicable in Capacity Plusand Linked Capacity Plus.Setting an Active Scan List1 to access the menu.Advanced Features in Non-Connect Plus Mode73English
2 or to Scan and press to select.3 or to Set Active List and press toselect.4 or to the required list and press toselect.The list selected will be your active scan list.Starting and Stopping ScanWhile scanning, the radio will only accept data (e.g.text message, location, telemetry, or PC data) ifreceived on its Selected Channel.1 to access the menu.2 or to Scan and press to select.•The display shows Turn On if scan is disabled.•The display shows Turn Off if scan isenabled.3Press to select.• The LED blinks yellow and the Scan icon isdisplayed, when Scan is enabled.• The LED turns off and the Scan icon is notdisplayed, when Scan is disabled.Responding to a Transmission During a ScanDuring scanning, your radio stops on a channel/groupwhere activity is detected. Your radio unmutes andthe incoming call sounds through the radio'sspeaker.The radio stays on that channel while theactivity is present and for a programmed time periodknown as “hang time”.1Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.If the Channel Free Indication feature is enabled,you hear a short alert tone the moment thetransmitting radio releases the PTT button,indicating the channel is free for you to respond.2Press the PTT button during hang time.The LED lights up solid green.3Wait for the Talk Permit Tone to finish (if enabled)and speak clearly into the microphone.4Release the PTT button to listen.Advanced Features in Non-Connect Plus Mode74English
If you do not respond within the hang time, theradio returns to scanning other channels/groups.Deleting a Nuisance ChannelIf a channel continually generates unwanted calls ornoise (termed a “nuisance” channel), you cantemporarily remove the unwanted channel from thescan list.This capability does not apply to the channeldesignated as the Selected Channel.Deleting a “nuisance” channel is only possiblethrough the programmed Nuisance Channel Deletebutton. This feature is not accessible through themenu.1When your radio “locks on to” an unwanted ornuisance channel, press the programmedNuisance Channel Delete button until you hear atone.2Release the Nuisance Channel Delete button.The nuisance channel is deleted.Restoring a Nuisance ChannelTo restore the deleted nuisance channel, do one ofthe following:• Turn the radio off and then power it on again.•Stop and restart a scan via the programmed Scanbutton or menu.• Change channel or zone.Contact SettingsContacts provides “address-book” capabilities on yourradio. Each entry corresponds to an alias or ID thatyou use to initiate a call.Each entry, depending on context, associates withone of five types of calls: Group Call, Private Call, AllCall, PC Call or Dispatch Call.PC Call and Dispatch Call are data-related. They areonly available with the applications. Refer to the dataapplications documentation for more information.Note:If the Privacy feature is enabled on a channel,you can make privacy-enabled Group Call,Private Call, and All Call on that channel. Onlytarget radios with the same Privacy Key, or theAdvanced Features in Non-Connect Plus Mode75English
same Key Value and Key ID as your radio willbe able to unscramble the transmission.See Privacy on page 121 for moreinformation.Additionally, Contacts menu allows you to assigneach entry to a programmable number key or moreon a keypad. If an entry is assigned to a number key,your radio can perform a quick dial on the entry.Your radio supports maximum of 1000 Contact listentries.Each entry within Contacts displays the followinginformation:• Call Type•Call Alias• Call IDNote:You can add or edit subscriber IDs for theDigital Contacts list.Making a Group Call from Contacts1 to access the menu.2 or to Contacts and press to select.The entries are alphabetically sorted.3 or to the required group alias or ID.4Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.5Press the PTT button to make the call.The LED lights up solid green. The first linedisplays the subscriber alias or ID. The secondline displays Private Call and the Private Callicon6Wait for the Talk Permit Tone to finish (if enabled),and speak clearly into the microphone.7Release the PTT button to listen.When any user in the group responds, the LEDblinks green, the display shows the transmittinguser's ID, the radio unmutes and the responsesounds through the radio's speaker.8If the Channel Free Indication feature is enabled,you hear a short alert tone the moment thetransmitting radio releases the PTT button,Advanced Features in Non-Connect Plus Mode76English
indicating the channel is free for you to respond.Press the PTT button to respond.If there is no voice activity for a predeterminedperiod of time, the call ends.9You hear a short tone. The display shows CallEnded.Making a Private Call from Contacts1 to access the menu.2 or to Contacts and press to select.The entries are alphabetically sorted.3Use one of the steps described next to select therequired subscriber alias or ID:• select the subscriber alias or ID directly• or to the required subscriber alias orID and press to select.•use the Manual Dial menu• or to Manual Dial and press toselect.• or to Radio Number and press to select.• If there was previously dialed ID, the IDappears along with a blinking cursor. Else,the first line of the display shows RadioNumber:; the second line of the displayshows a blinking cursor. Use the keypad toedit/enter the ID. Press to select.4Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.5Press the PTT button to make the call.The LED lights up solid green. The first linedisplays the subscriber alias or ID. The secondline displays Private Call and the Private Callicon.6Wait for the Talk Permit Tone to finish (if enabled),and speak clearly into the microphone.7Release the PTT button to listen.When the target radio responds, the LED blinksgreen and the display shows the transmittingAdvanced Features in Non-Connect Plus Mode77English
user's ID. the radio unmutes and the responsesounds through the radio's speaker.8If the Channel Free Indication feature is enabled,you hear a short alert tone the moment thetransmitting radio releases the PTT button,indicating the channel is free for you to respond.Press the PTT button to respond.If there is no voice activity for a predeterminedperiod of time, the call ends.The display shows Call Ended.Making a Phone Call from Contacts1 to access the menu.2 or to Contacts and press to select.The entries are alphabetically sorted.3Use one of the steps described next to select therequired subscriber alias or ID:• select the subscriber alias or ID directly• or to the required subscriber alias orID and press to select.•use the Manual Dial menu• or to Manual Dial and press toselect.• or to Phone Number and press to select.•The first line of the display shows PhoneNumber: , the second line of the displayshows a blinking cursor. Use the keypad toenter a telephone number, and press toselect the entered number.If the entry selected is empty, a negative indicatortone sounds and the display shows Phone CallInvalid # .When you press PTT button while in the PhoneContacts screen, a negative indicator tone soundsand the display shows Press OK to PlacePhone Call.4 or to Call Phone and press to select.Advanced Features in Non-Connect Plus Mode78English
5If the access code was not preconfigured in theContacts list, the first line of the display showsAccess Code: . The second line of the displayshows a blinking cursor. Enter the access codeand press to proceed.During channel access, press to dismiss thecall attempt and a negative indicator tone sounds.Your radio returns to the Call Phone screen.The access code cannot be more than 10characters.The first line of the display shows Calling. Thesecond line of the display shows the subscriberalias or ID, and the Phone Call icon.If successful, the DTMF tone sounds. You hearthe dialing tone of the telephone user. The first lineof the display shows the subscriber alias or ID,and the RSSI icon. The second line of the displayshows Phone Call and the Phone Call icon.If unsuccessful, a tone sounds and the displayshows Phone Call Failed. Your radio returns tothe Access Code input screen. If the access codewas preconfigured in the Contacts list, the radioreturns to the screen you were on prior to initiatingthe call.6Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.7Do one of the following:• Press the PTT button to talk and release it tolisten.Note:The RSSI icon disappears duringtransmission.To enter extra digits, if requested by thePhone Call, press any keypad key tobegin the input of extra digits. The firstline of the display shows ExtraDigits: . The second line of thedisplay shows a blinking cursor. Enterthe extra digits and press toproceed. The DTMF tone sounds andthe radio returns to the previous screen.If the call ends while you are enteringthe extra digits requested by the PhoneAdvanced Features in Non-Connect Plus Mode79English
Call, your radio returns to the screenyou were on prior to initiating the call.• Press One Touch Access button.Note:The DTMF tone sounds.If the entry for the One Touch Accessbutton is empty, a negative indicatortone sounds.During the call, when you press One TouchAccess button with the deaccess codepreconfigured or enter the deaccess code as theinput for extra digits, your radio attempts to endthe call.8Press to end the call.9If deaccess code was not preconfigured in theContacts list, the first line of the display shows De-Access Code:. The second line of the displayshows a blinking cursor. Enter the deaccess codeand press to proceed.The deaccess code cannot be more than 10characters.The DTMF tone sounds and the display showsEnding Phone Call.If successful, a tone sounds and the display showsPhone Call Ended. Your radio returns to the CallPhone screen.If unsuccessful, your radio returns to the PhoneCall screen. Repeat Steps 8 and 9 or wait for thetelephone user to end the call.When the telephone user ends the call, a tonesounds and the display shows Phone CallEnded.Making a Call Alias SearchYou can also use alias or alphanumeric search toretrieve the required subscriber alias.This feature is only applicable while in Contacts.Note:Press button or to exit alias search.If you release the PTT button while the radio issetting up the call, it exits without anyindication and returns to the previous screen.Advanced Features in Non-Connect Plus Mode80English
Your radio may be programmed to perform aradio presence check prior to setting up thePrivate Call. If the target radio is not available,you hear a short tone and see negative mininotice on the display.1 to access the menu.2 or to Contacts and press to select.The entries are alphabetically sorted.3Key in the first character of the required alias.A blinking cursor appears.4Use the keypad to type the required alias.Press to move one space to the left. Press tomove one space to the right. Press the keyto delete any unwanted characters. Long press to change text entry method.The first line of the display shows the charactersyou keyed in. The next lines of the display showthe short listed search results. The alias search iscase-insensitive. If there are two or more entrieswith the same name, the radio displays the entrythat is listed first in the Contacts list.5Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.6Press the PTT button to make the call.The LED lights up solid green. The display showsthe destination alias.7Wait for the Talk Permit Tone to finish (if enabled),and speak clearly into the microphone.8Release the PTT button to listen.When the target radio responds, the LED blinksgreen, the radio unmutes and the responsesounds through the radio’s speaker.9If the Channel Free Indication feature is enabled,you hear a short alert tone the moment thetransmitting radio releases the PTT button,indicating the channel is free for you to respond.Press the PTT button to respond.If there is no voice activity for a predeterminedperiod of time, the call ends.The display shows Call Ended.Advanced Features in Non-Connect Plus Mode81English
Making a Group, Private, Phone or All Call by AliasSearchYou can also use alias or alphanumeric search toretrieve the required subscriber alias.This feature is only applicable while in Contacts.Note:Press button or to exit alias search.If you release the PTT button while the radio issetting up the call, it exits without anyindication and returns to the previous screen.Your radio may be programmed to perform aradio presence check prior to setting up thePrivate Call. If the target radio is not available,you hear a short tone and see Party NotAvailable on the display; the radio returns tothe menu prior to initiating the radio presencecheck.1 to access the menu.2 or to Contacts and press to select.The entries are alphabetically sorted.3Key in the first character of the required alias.A blinking cursor appears.4Use the keypad to type the required alias.Press to move one space to the left. Press tomove one space to the right. Press the keyto delete any unwanted characters.The first line of the display shows the charactersyou keyed in. The second line of the displayshows an alias that matches what you have keyedin. The alias search is case-insensitive. If there aretwo or more entries with the same name, the radiodisplays the entry that is listed first in the Contactslist.5 or to scroll to desired entry, if necessary.6Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.7Press the PTT button to make the call.The LED lights up solid green. The first linedisplays the target radio’s ID. The second linedisplays the call type and the Call icon.Advanced Features in Non-Connect Plus Mode82English
8Wait for the Talk Permit Tone to finish (if enabled)and speak clearly into the microphone.9Release the PTT button to listen.When the target radio responds, the LED blinksgreen.10 If the Channel Free Indication feature is enabled,you will hear a short alert tone the moment thetarget radio releases the PTT button, indicating thechannel is free for you to respond. Press the PTTbutton to respond.If there is no voice activity for a programmedperiod of time, the call ends.You hear a short tone. The display shows CallEnded.Assigning an Entry to a Programmable Number KeyNote:See Making a Group, Private or All Call withthe Programmable Number Key on page 57for details on making a Group, Private or AllCall with the programmed number key(s).1 to access the menu.2 or to Contacts and press to select.The entries are alphabetically sorted.3 or to the required alias or ID and press to select.4 or to Program Key and press toselect.5 or to the desired number key and press to select.If the number key is currently assigned to anotherentry, the display shows The Key is AlreadyAssigned and then, the first line of the displayshows Overwrite?. Do one of the following.• or to Yes and press to overwritethe number key assignment.• or to No and press to return to theprevious step.Advanced Features in Non-Connect Plus Mode83English
Each entry can be associated to different numberkeys. You see a before each number key that isassigned to an entry. If the is before Empty, thatnumber key is not assigned.If a number key is assigned to an entry in aparticular mode, this feature is not supported whenyou long press the number key in another mode.The radio sounds a positive indicator tone and thedisplay shows Contact Saved.The screen automatically returns to the previousmenu.Removing the Association between Entry andProgrammable Number Key1Access the required alias or ID via:RadioControlStepsProgram-med num-ber keyLong press the programmed numberkey to the required alias or ID; press to select.Menu 1 to access the menu.RadioControlSteps2 or to Contacts and press to select. The entries are al-phabetically sorted.3 or to the required sub-scriber alias or ID and press to select.2 or to Program Key and press toselect.3 or to Empty and press to select.The first line of the display shows Clear fromall keys? .4 or to Yes and press to select.Note:When an entry is deleted, the associationbetween the entry and its programmednumber key(s) is removed.Advanced Features in Non-Connect Plus Mode84English
The radio sounds a positive indicator tone and thedisplay shows Contact Saved.The screen automatically returns to the previousmenu.Adding a New Contact1 to access the menu.2 or to Contacts and press to select.3 or to New Contact and press toselect.4 or to the required contact type, eitherRadio Contact or Phone Contact, and press to select.5Use the keypad to enter the contact number andpress to confirm.6Use the keypad to enter the contact name andpress to confirm.7If adding a Radio Contact, or to therequired ringer type and press to select.The radio sounds a positive indicator tone and thedisplay shows positive mini notice.Sending a Message to a Contact1 to access the menu.2 or to Contacts and press to select.3 or to New Contact and press toselect.4 or to the required contact type, eitherRadio Contact or Phone Contact, and press to select.5 or to the required alias and press toselect.Advanced Features in Non-Connect Plus Mode85English
6 or to Send Message and press toselect.7Press to send the message.Call Indicator SettingsActivating and Deactivating Call Ringers for Call AlertYou can select, or turn on or off ringing tones for areceived Call Alert.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Tones/Alert and press toselect.5 or to Call Ringers and press toselect.6 or to Call Alert and press to select.The current tone is indicated by a .7 or to the required tone and press toselect.You can also use or to change the selectedoption. appears beside selected tone.Activating and Deactivating Call Ringers for PrivateCallsYou can turn on or off the ringing tones for a receivedPrivate Call.1 to access the menu.2 or to Utilities and press to select.Advanced Features in Non-Connect Plus Mode86English
3 or to Radio Settings and press toselect.4 or to Tones/Alerts and press toselect.5 or to Call Ringers and press toselect.6 or to Private Call and press toselect.You can also use or to change the selectedoption.7Press to enable/disable the Private Callringing tones.The display shows beside Enabled, if PrivateCall ringing tones are enabled.The disappears from beside Enabled, if PrivateCall ringing tones are disabled.Activating and Deactivating Call Ringers for TextMessageYou can turn on or off the ringing tones for a receivedText Message.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Tones/Alerts and press toselect.5 or to Call Ringers and press toselect.6 or to Text Message and press toselect.The current tone is indicated by a .Advanced Features in Non-Connect Plus Mode87English
7 or to the required tone and press toselect. appears beside selected tone.Activating and Deactivating Call Ringers for TelemetryStatus with TextYou can turn on or off the ringing tones for a receivedTelemetry Status with Text.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Tones/Alerts and press toselect.5 or to Call Ringers and press toselect.6 or to Telemetry and press to select.The current tone is indicated by a .7Do one of the following:• or to the preferred tone and press to select. The display shows Tone <Number>Selected and a appears left of the selectedtone.• or to Turn Off and press toselect. The display shows Telemetry RingerOff and a appears left of Turn Off.Assigning Ring StylesYou can program your radio to sound one of tenpredefined ringing tones when receiving a Call Alertor a Text Message from a particular contact.The radio sounds out each ring style as you navigatethrough the list.1 to access the menu.2 or to Contacts and press to select.The entries are alphabetically sorted.Advanced Features in Non-Connect Plus Mode88English
3 or to the required alias or ID and press to select.4 or to View/Edit and press to select.5 or to Ringer and press to select.6 or to required ring style and press toselect.A indicates the current selected tone.7 or to the required tone and press toselect. appears beside selected tone.The display shows Contact Saved.All Tones1 to access the menu.2 or to Utilities and press to select.3Go to Radio Settings. SelectTones/Alerts.Select All Tones. Toggle All Tones to beenabled or disabled.Selecting a Ring Alert TypeNote:The programmed Ring Alert Type button isassigned via CPS. Check with your dealer orsystem administrator to determine how yourradio has been programmed.You can program the radio calls to onepredetermined vibrate call. If All Tones status isdisabled, the radio displays the All Tone Mute icon.If All Tones status is enabled, the related ring alerttype is displayed.The radio sounds one vibration if it is a momentaryring style. The radio vibrates repetitively if it is arepetitive ring style. When set to Ring and Vibrate,the radio sounds a specific ring tone if there is anyincoming radio transaction (for example, Call Alert orMessage). It sounds like a good key tone or missedcall. If the notification list is not empty, the radiorepeats a vibration every 5 minutes.Advanced Features in Non-Connect Plus Mode89English
You can select a Ring Alert Type by performing oneof the following actions.•Press the programmed Ring Alert Type button toaccess the Ring Alert Type menu.a) Press or to Ring, Vibrate, Ring &Vibrate or Silent and press to select.•Access this feature via the menu.a) Press to access the menu.b) Press or to Utilities and press to select.c) Press or to Radio Settings andpress to select.d) Press or to Tones/Alerts and press to select.e) Press or to Ring Alert Type andpress to select.f) Press or to Ring, Vibrate, Ring &Vibrate or Silent and press to select.Configuring Vibrate StyleNote:The programmed Vibrate Style button isassigned via CPS. Check with your dealer orsystem administrator to determine how yourradio has been programmed.You can configure the vibrate style by performing oneof the following actions.•Press the programmed Vibrate Style button toaccess the Vibrate Style menu.a) Press or to Short, Medium, or Longand press to select.•Access this feature via the menu.a) Press to access the menu.b) Press or to Utilities and press to select.c) Press or to Radio Settings andpress to select.d) Press or to Tones/Alerts and press to select.Advanced Features in Non-Connect Plus Mode90English
e) Press or to Vibrate Style and press to select.f) Press or to Short, Medium, or Longand press to select.Escalating Alarm Tone VolumeYou can program your radio to continually alert youwhen a radio call remains unanswered. This is doneby automatically increasing the alarm tone volumeover time. This feature is known as Escalert.Call Log FeaturesYour radio keeps track of all recent outgoing,answered, and missed Private Calls. Use the call logfeature to view and manage recent calls.You can perform the following tasks in each of yourcall lists:• Store ID to Contacts•Delete• View DetailsViewing Recent CallsThe lists are Missed, Answered, and Outgoing.1 to access the menu.2 or to Call Log and press to select.3 or to preferred list and press to select.The display shows the most recent entry at the topof the list.4 or to view the list.Press the PTT button to start a Private Call withthe current selected alias or ID.Missed Call ScreenWhenever a call is missed, your radio displays amissed call message in the notification list. Thedisplay shows Missed Calls.Do one of the following:•Press to view the missed call ID. Themissed call log list appears on display.•Press to store or delete the entry.Advanced Features in Non-Connect Plus Mode91English
Storing an Alias from a Call ListYou can also store an ID without an alias.1 to access the menu.2 or to Call Log and press to select.3 or to the required list and press toselect.4 or to Store and press to select.A blinking cursor appears. If needed, key in thealias for that ID and press . The display showspositive mini notice.Deleting a Call from a Call List1 to access the menu.2 or to Call Log and press to select.3 or to the required list and press toselect.When you select a call list and it contains noentries, the display shows List Empty, andsounds a low tone if Keypad Tones are turned on(see Turning Keypad Tones On or Off on page144).4 or to the required alias or ID and press to select.5 or to Delete Entry? and press toselect.6Do one of the following:•Press to select Yes to delete the entry. Thedisplay shows Entry Deleted.• or to No, and press the button toreturn to the previous screen.Advanced Features in Non-Connect Plus Mode92English
Viewing Details from a Call List1 to access the menu.2 or to Call Log and press to select.3 or to the required list and press toselect.4 or to the required alias or ID and press to select.5 or to View Details and press toselect.Display shows details.Call Alert OperationCall Alert paging enables you to alert a specific radiouser to call you back when they are able to do so.This feature is applicable for subscriber aliases or IDsonly and is accessible through the menu via Contactsor manual dial.Receiving and Responding to a Call AlertWhen you receive a Call Alert page, you see thenotification list listing a Call Alert with the alias or ID ofthe calling radio on the display.When you hear a repetitive tone and the LEDblinks yellow, do one of the following:• Press the PTT button while the display stillshows the Call Alert in the Notification List torespond with a Private Call.•Press to exit the Notification List. Thealert is moved to the Missed Call Log.See Notification List on page 138 for details aboutthe Notification List.See Call Log Features on page 91 for detailsabout the Missed Call List.Making a Call Alert from the Contact List1 to access the menu.2 or to Contacts and press to select.Advanced Features in Non-Connect Plus Mode93English
3Use one of the steps described next to select therequired subscriber alias or ID:• select the subscriber alias or ID directly• or to the required subscriber alias orID and press to select.•use the Manual Dial menu• or to Manual Dial and press toselect.• or to Radio Contact and press to select.•The first line of the display shows RadioNumber: , the second line of the displayshows a blinking cursor. Enter thesubscriber ID you want to page and press.4 or to Call Alert and press to select.The display shows Call Alert and thesubscriber alias or ID, indicating that the Call Alerthas been sent.The LED lights up solid green when your radio issending the Call Alert.If the Call Alert acknowledgement is received, thedisplay shows positive mini notice.If the Call Alert acknowledgement is not received,the display shows negative mini notice.Making a Call Alert with the One Touch Access ButtonPress the programmed One Touch Accessbutton to make a Call Alert to the predefined aliasor ID.The display shows Call Alert and thesubscriber alias or ID, indicating that the Call Alerthas been sent.The LED lights up solid green when your radio issending the Call Alert.If the Call Alert acknowledgement is received, thedisplay shows positive mini notice.If the Call Alert acknowledgement is not received,the display shows negative mini notice.Advanced Features in Non-Connect Plus Mode94English
Emergency OperationAn Emergency Alarm is used to indicate a criticalsituation. You are able to initiate an Emergency atany time on any screen display even when there isactivity on the current channel.Your dealer can set the duration of a button press forthe programmed Emergency button, except for longpress, which is similar with all other buttons:Short press Between 0.05 seconds and 0.75seconds.Long press Between 1.00 second and 3.75seconds.The Emergency button is assigned with theEmergency On/Off feature. Check with your dealer forthe assigned operation of the Emergency button.Note:If the short press for the Emergency button isassigned to turn on the Emergency mode,then the long press for the Emergency buttonis assigned to exit the Emergency mode.If the long press for the Emergency button isassigned to turn on the Emergency mode,then the short press for the Emergency buttonis assigned to exit the Emergency mode.Your radio supports three Emergency Alarms:• Emergency Alarm• Emergency Alarm with Call• Emergency Alarm with Voice to FollowNote:Only one of the Emergency Alarms above canbe assigned to the programmed Emergencybutton.In addition, each alarm has the following types:•Regular – Radio transmits an alarm signal andshows audio and/or visual indicators.•Silent – Radio transmits an alarm signal withoutany audio or visual indicators. Radio receives callswithout any sound through the radio’s speaker,until you press the PTT button to initiate the call.•Silent with Voice – Radio transmits an alarmsignal without any audio or visual indicators, butallow incoming calls to sound through the radio’sspeaker.Advanced Features in Non-Connect Plus Mode95English
Receiving an Emergency AlarmOn receiving an emergency alarm the emergencyicon appears, a tone sounds, the LED blinks red andthe radio displays the emergency caller alias. If morethan one alarm has occurred all emergency calleraliases are displayed in an Alarm List.1When receiving an emergency alarm, do one ofthe following:• If a single emergency call alias is displayed,press to view more details. Press againto view your action details.• If the multiple emergency caller aliases aredisplayed in the Alarm List, or to therequired alias and press to view moredetails. Press again to view your actionitems.2Press and select Yes to exit the Alarm List.To revisit the Alarm List, press to access themenu and select Alarm List.Responding to an Emergency Alarm1In the Alarm List, or to the required alias.2Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.If the Channel Free Indication feature is enabled,you will hear a short alert tone the moment thetransmitting radio releases the PTT button,indicating the channel is now available for use.3Press PTT button to transmit non-emergencyvoice to the same group that the EmergencyAlarm was targeted to.Emergency voice can only be transmitted by theemergency initiating radio. All other radios(including the emergency receiving radio) transmitnon-emergency voice.The LED lights up solid green. Your radio remainsin the Emergency mode.4Wait for the Talk Permit Tone to finish (if enabled)and speak clearly into the microphone.5Release the PTT button to listen.Advanced Features in Non-Connect Plus Mode96English
When the emergency initiating radio responds, theLED blinks green, the LED blinks green, the radiounmutes and the response sounds through theradio's speaker. You see the Group Call icon, thegroup ID, and transmitting radio ID on yourdisplay.6Your radio displays the Alarm List.Exiting Emergency Mode After Receiving theEmergency AlarmExit the Emergency mode by performing one ofthe following actions:• Delete the alarm items, see Deleting an AlarmItem from the Alarm List for more information.• Power down the radio.Sending an Emergency AlarmThis feature allows you to send an Emergency Alarm,a non-voice signal, which triggers an alert indicationon a group of radios.If your radio is set to Silent, it does not display anyaudio or visual indicators during Emergency mode.Press the programmed Emergency On button.The display shows Tx Alarm and the destinationalias. The LED lights up solid green and theEmergency icon appears on the Home screendisplay.When an Emergency Alarm acknowledgement isreceived, the Emergency tone sounds and theLED blinks green. The display shows Alarm Sent.If your radio does not receive an EmergencyAlarm acknowledgement, and after all retries havebeen exhausted, a tone sounds and the displayshows Alarm Failed.Radio exits the Emergency Alarm mode andreturns to the Home screen.Sending an Emergency Alarm with CallThis feature allows you to send an Emergency Alarmto a group of radios. Upon acknowledgement by aradio within the group, the group of radios cancommunicate over a programmed Emergencychannel.If your radio is set to Silent, it does not display anyaudio or visual indicators during Emergency mode, orallow any received calls to sound through the speakerAdvanced Features in Non-Connect Plus Mode97English
of the radio, until you press the PTT button to initiatethe call.If your radio is set to Silent with Voice, it does notdisplay any audio or visual indicators duringEmergency mode, but allow incoming calls to soundthrough the speaker of the radio. The indicators onlyappear once you press the PTT button to initiate, orrespond to, the call.1Press the programmed Emergency On button.The display shows Sending Alarm, whichalternates with your radio ID. Tx Alarm and thedestination alias. The LED lights up solid greenand the Emergency icon appears on the Homescreen display.When an Emergency Alarm acknowledgement isreceived, the Emergency tone sounds and theLED blinks green. The display shows Alarm Sent.2Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.3Press PTT button to make the call.The LED lights up solid green and the Group iconappears on the display.4Wait for the Talk Permit Tone to finish (if enabled)and speak clearly into the microphone.5Release the PTT button to listen.If the Channel Free Indication feature is enabled,you hear a short alert tone the moment thetransmitting radio releases the PTT button,indicating the channel is free for you to respond.6Press the PTT button to respond.7Once your call ends, press Emergency Off buttonto exit the Emergency mode.Sending an Emergency Alarm with Voice to FollowThis feature allows you to send an Emergency Alarmto a group of radios. The microphone of your radio isautomatically activated, allowing you to communicatewith the group of radios without pressing the PTTbutton.This activated microphone state is also known as “hotmic”.If your radio has Emergency Cycle Mode enabled,repetitions of hot mic and receiving period are madefor a programmed duration. During Emergency CycleAdvanced Features in Non-Connect Plus Mode98English
Mode, received calls sound through the speaker ofthe radio.If you press the PTT button during the programmedreceiving period, you hear a prohibit tone, indicatingthat you should release the PTT button. The radioignores the PTT press and remains in Emergencymode.Note:If you press the PTT button during hot mic,and continue to press it after the hot micduration expires, the radio continues totransmit until you release the PTT button.If your radio is set to Silent, it does not display anyaudio or visual indicators during Emergency mode, orallow any received calls to sound through the speakerof the radio, until the programmed hot mictransmission period is over, and you press the PTTbutton.If your radio is set to Silent with Voice, it does notdisplay any audio or visual indicators duringEmergency mode when you are making the call withhot mic, but allow sound through the speaker of theradio when the target radio responds after theprogrammed hot mic transmission period is over. Theindicators only appear when you press the PTTbutton.Note:If the Emergency Alarm request fails, the radiodoes not retry to send the request, and entersthe hot mic state directly.1Press the programmed Emergency On button.The display shows Tx Alarm and the destinationalias.The LED lights up solid green and theEmergency icon is displayed.2Once the display shows Alarm Sent, speakclearly into the microphone.When hot mic has been enabled, the radioautomatically transmits without a PTT button pressuntil the hot mic duration expires. Whiletransmitting, the LED lights up solid green and theEmergency icon appears on the display.3The radio automatically stops transmitting whenthe cycling duration between hot mic and receivingcalls expires, if Emergency Cycle Mode isenabled.Advanced Features in Non-Connect Plus Mode99English
4Once the hot mic duration expires, the radioautomatically stops transmitting. To transmitagain, press the PTT button.Reinitiating an Emergency ModeNote:This feature is only applicable to the radiosending the Emergency Alarm.There are two instances where this can happen:• You change the channel while the radio is inEmergency mode. This exits the Emergencymode. If Emergency Alarm is enabled on this newchannel, the radio reinitiates Emergency.•You press the programmed Emergency Onbutton during an Emergency initiation/transmissionstate. This causes the radio to exit this state, andto reinitiate Emergency.Exiting Emergency Mode After Sending the EmergencyAlarmYour radio exits Emergency mode when one of thefollowing occurs:• Emergency Alarm acknowledgement is received(for Emergency Alarm only).• All retries to send the alarm have been exhausted.• The Emergency Off button is pressed.Note:If your radio is powered off, it exits theEmergency mode. The radio will not reinitiatethe Emergency mode automatically when it isturned on again.If you change channels when your radio is inEmergency mode to a channel that has noemergency system configured, No Emergencyis shown on your display.Man DownNote:This feature is applicable to SL7550e/SL7590e/SL7580e only.This feature prompts an emergency to be raised ifthere is a change in the motion of the radio, such asthe tilt of the radio, motion and/or the lack of motionfor a predefined time.Following a change in the motion of the radio for aprogrammed duration, the radio pre-warns the uservia an audio indicator indicating that a change inmotion is detected.Advanced Features in Non-Connect Plus Mode100English
If there is still no acknowledgment by the user beforethe predefined reminder timer expires, the radioinitiates an Emergency Alarm or an Emergency Call.You can program the reminder timer via CPS.Turning the Man Down Feature On or OffNote:This feature is applicable to SL7550e/SL7590e/SL7580e only. The programmedMan Down button and Man Down settings areassigned via CPS. Check with your dealer orsystem administrator to determine how yourradio has been programmed.If you disable the Man Down feature, theprogrammed alert tone sounds repeatedly untilthe Man Down feature is enabled. A devicefailure tone sounds when the Man Downfeature fails while powering up. The devicefailure tone continues until the radio resumesnormal operation.If you enable Man Down to maximumsensitivity and set Vibrate Style to high, theradio automatically restricts Vibrate Style tomedium. This function prevents high VibrateStyle from initiating the Man Down emergencyfeature.You can enable or disable this feature by performingone of the following actions.•Press the programmed Man Down button totoggle the feature on or off.•Access this feature via the menu.a) Press to access the menu.b) Press or to Utilities and press to select.c) Press or to Radio Settings andpress to select.d) Press or to Man Down and press toselect.You can also use or to change theselected option.e) Press to enable or disable Man Down.This display shows beside Enabled.The disappears beside Enabled.Advanced Features in Non-Connect Plus Mode101English
Text Message FeaturesYour radio is able to receive data, for example a textmessage, from another radio or an e-mail application.The maximum length of characters for sending a textmessage, including the subject line (seen whenreceiving message from an e-mail application),depends on CPS configuration which can beconfigured up to maximum 280 characters. Your radiocan receive a text message with maximum length of280 characters.If user forwards a text message with characters morethan the maximum length, the text message will betruncated to the maximum length.Note:Long press at any time to return to theHome screen.Writing and Sending a Text Message1Access the Text Message feature.Radio Con-trolsStepsProgrammedText MessagebuttonPress the programmed TextMessage button.Menu 1 to access the menu.2 or to Messages andpress to select.2 or to Compose and press to select.A blinking cursor appears.3Use the keypad to type your message.Press to move one space to the left. Press orthe key to move one space to the right.Press the key to delete any unwantedcharacters. Long press to change text entrymethod.Advanced Features in Non-Connect Plus Mode102English
4Press once message is composed.5Depending on whether you want to send, save, re-edit, or delete the newly composed message, doone of the following.• or to Send, and press to send themessage.• or to Save, and press to save themessage to the Drafts folder.• to edit the message.• again to choose between deleting themessage or saving it to the Drafts folder.The display shows transitional mini notice,confirming your message is being sent.If the message is sent successfully, a tone soundsand the display shows positive mini notice.If the message cannot be sent, a low tone soundsand the display shows negative mini notice.If the text message fails to send, the radio returnsyou to the Resend option screen (see ManagingFail-to-Send Text Messages on page 107.Sending a Quick Text MessageYour radio supports a maximum of 50 Quick Textmessages as programmed by your dealer.While Quick Text messages are predefined, you canedit each message before sending it.1Access the Text Message feature.Radio Con-trolsStepsProgrammedText MessagebuttonPress the programmed TextMessage button.Menu 1 to access the menu.2 or to Messages andpress to select.2 or to Quick Text and press to select.Advanced Features in Non-Connect Plus Mode103English
3 or to the required Quick Text and press to select.4Use the keypad to edit the message, if required.Press to move one space to the left. Press orthe key to move one space to the right.Press the key to delete any unwantedcharacters. Long press to change the textentry method.5Press once message is composed.6Depending on whether you want to send, save, re-edit, or delete the newly composed message, doone of the following.• or to Send, and press to send themessage.• or to Save, and press to save themessage to the Drafts folder.• to edit the message.• again to choose between deleting themessage or saving it to the Drafts folder.7If you are sending the message, select therecipient by• or to the required alias or ID and press to select.• or to Manual Dial, and press toselect. The first line of the display shows RadioNumber:. The second line of the display showsa blinking cursor. Key in the subscriber alias orID and press .The display shows , the transitional mini notice,confirming your message is being sent.If the message is sent successfully, a tone soundsand the display shows the positive mini notice.If the message cannot be sent, a low tone soundsand the display shows the negative mini notice.Advanced Features in Non-Connect Plus Mode104English
Sending a Quick Text Message with the One TouchAccess ButtonPress the programmed One Touch Accessbutton to send a predefined Quick Text messageto a predefined alias or ID.The display shows the transitional mini notice,confirming your message is being sent.If the message is sent, a tone sounds and thedisplay shows the positive mini notice.If the message cannot be sent, a low tone soundsand the display shows the negative mini notice.If the text message fails to send, the radio returnsyou to the Resend option screen (see ManagingFail-to-Send Text Messages on page 107).Accessing the Drafts FolderYou can save a text message to send it at a latertime.If a PTT button press or a mode change causes theradio to exit the text message writing/editing screenwhile you are in the process of writing or editing a textmessage, your current text message is automaticallysaved to the Drafts folder.The most recent saved text message is always addedto the top of the Drafts list.The Drafts folder stores a maximum of ten (10) lastsaved messages. When the folder is full, the nextsaved text message automatically replaces the oldesttext message in the folder.Note:Long press at any time to return to theHome screen.Viewing a Saved Text Message1Access the Text Message feature.Radio Con-trolsStepsProgrammedText MessagebuttonPress the programmed TextMessage button.Menu 1 to access the menu.2 or to Messages andpress to select.Advanced Features in Non-Connect Plus Mode105English
2 or to Drafts and press to select.3 or to the required message and press to select.Editing and Sending a Saved Text Message1Press again while viewing the message.2 or to Edit and press to select.A blinking cursor appears.3Use the keypad to type your message.Press to move one space to the left. Press orthe key to move one space to the right.Press the key to delete any unwantedcharacters. Long press to change text entrymethod.4Press once message is composed.5Select the message recipient by• or to the required alias or ID and press to select.• or to Manual Dial, and press toselect. The first line of the display shows RadioNumber:. The second line of the display showsa blinking cursor. Key in the subscriber alias orID and press .The display shows transitional mini notice,confirming your message is being sent.If the message is sent successfully, a tone soundsand the display shows positive mini notice.If the message cannot be sent, a low tone soundsand the display shows negative mini notice.If the text message cannot be sent, it is moved tothe Sent Items folder and marked with a SendFailed icon.Deleting a Saved Text Message from Drafts1Access the Text Message feature.Advanced Features in Non-Connect Plus Mode106English
Radio Con-trolsStepsProgrammedText MessagebuttonPress the programmed TextMessage button.Menu 1 to access the menu.2 or to Messages andpress to select.2 or to Drafts and press to select.3 or to the required message and press to select.4Press again while viewing the message.5 or to Delete and press to delete thetext message.Managing Fail-to-Send Text MessagesYou can select one of the following options while atthe Resend option screen:• Resend•Forward• EditNote:If the channel type (i.e. conventional digital orCapacity Plus or Linked Capacity Plus) is nota match, you can only edit and forward a Fail-to-Send message.Resending a Text MessagePress to resend the same message to thesame subscriber/group alias or ID.If the message is sent successfully, a tone soundsand the display shows the positive mini notice.If the message cannot be sent, the display showsthe negative mini notice.Advanced Features in Non-Connect Plus Mode107English
Forwarding a Text MessageSelect Forward to send the message to anothersubscriber/group alias or ID.1 or to Forward and press to select.2Select the message recipient by• or to the required alias or ID and press to select.• or to Manual Dial, and press toselect. The first line of the display shows RadioNumber:. The second line of the display showsa blinking cursor. Key in the subscriber alias orID and press .The display shows Text Message:<Subscriber/Group Alias or ID>, confirmingyour message is being sent.If the message is sent successfully, a tone soundsand the display shows positive mini notice.If the message cannot be sent, a low tone soundsand the display shows negative mini notice.Editing a Text MessageSelect Edit to edit the message before sending it.Note:If a subject line is present (for messagesreceived from an e-mail application), youcannot edit it.1 or to Edit and press to select.A blinking cursor appears.2Use the keypad to edit your message.Press to move one space to the left. Press orthe key to move one space to the right.Press the key to delete any unwantedcharacters. Long press to change text entrymethod.3Press once message is composed.4Depending on whether you want to send, save, re-edit, or delete the newly composed message, doone of the following.Advanced Features in Non-Connect Plus Mode108English
• or to Send, and press to send themessage.• or to Save, and press to save themessage to the Drafts folder.• to edit the message.• again to choose between deleting themessage or saving it to the Drafts folder.5If you are sending the message, select therecipient by• or to the required alias or ID and press to select.• or to Manual Dial, and press toselect. The first line of the display shows RadioNumber:. The second line of the display showsa blinking cursor. Key in the subscriber alias orID and press .The display shows Text Message:<Subscriber/Group Alias or ID>, confirmingyour message is being sent.If the message is sent successfully, a tone soundsand the display shows positive mini notice.If the message cannot be sent, a low tone soundsand the display shows negative mini notice.Managing Sent Text MessagesOnce a message is sent to another radio, it is savedin Sent Items. The most recent sent text message isalways added to the top of the Sent Items list.The Sent Items folder is capable of storing amaximum of thirty (30) last sent messages. When thefolder is full, the next sent text message automaticallyreplaces the oldest text message in the folder.Note:Long press at any time to return to theHome screen.Viewing a Sent Text Message1Access the Text Message feature by performingone of the following actions:Advanced Features in Non-Connect Plus Mode109English
Radio Con-trolsStepsProgrammedText MessagebuttonPress the programmed TextMessage button.Menu 1 to access the menu.2 or to Messages andpress to select.2 or to Sent Items and press to select.3 or to the required message and press to select.A subject line may be shown if the message isfrom an e-mail application.The icon at the top right corner of the screenindicates the status of the message (see Sent ItemIcons on page 40).Sending a Sent Text MessageYou can select one of the following options whileviewing a sent text message:• Resend•Forward• Edit• DeleteNote:If the channel type (i.e. conventional digital orCapacity Plus or Linked Capacity Plus) is nota match, you can only edit, forward, or deletea Sent message.1Press again while viewing the message.2 or to one of the following options andpress to select.Option StepsFor‐wardSelect Forward to send the selectedtext message to another subscriber/group alias or ID (see Forwarding a TextMessage on page 108).Advanced Features in Non-Connect Plus Mode110English
Option StepsEdit Select Edit to edit the selected textmessage before sending it (see Editinga Text Message on page 108).De‐leteSelect Delete to delete the text mes-sage.Re‐send Select Resend to resend the selectedtext message to the same subscriber/group alias or ID.The display shows transitional mini no-tice, confirming that the same messageis being sent to the same target radio.If the message is sent successfully, atone sounds and the display shows pos-itive mini notice.If the message cannot be sent, a lowtone sounds and the display shows neg-ative mini notice.If the message fails to send, the radioreturns you to the Resend option screen.Option StepsPress to resend the message to thesame subscriber/group alias or ID.Note:Changing the volume, andpressing any button, except for, , or , returns you tothe message.The radio exits the Resend op-tion screen if you press the PTTbutton to initiate a Private orGroup Call, or to respond to aGroup Call. The radio also exitsthe screen when it receives atext or telemetry message, anemergency call or alarm, or acall alert.The display returns to the Re‐send option screen if you pressthe PTT button to respond to aPrivate Call (except when theradio is displaying the MissedAdvanced Features in Non-Connect Plus Mode111English
Option StepsCall screen), and at the end ofan All Call.If you exit the message sending screen while themessage is being sent, the radio updates thestatus of the message in the Sent Items folderwithout providing any indication in the display orvia sound.If the radio changes mode or powers down beforethe status of the message in Sent Items isupdated, the radio cannot complete any In-Progress messages and automatically marks itwith a Send Failed icon.The radio supports a maximum of five (5) In-Progress messages at one time. During thisperiod, the radio cannot send any new messageand automatically marks it with a Send Failed icon.Deleting All Sent Text Messages from Sent Items1Access the Text Message feature by performingone of the following actions:Radio Con-trolsStepsProgrammedText MessagebuttonPress the programmed TextMessage button.Menu 1 to access the menu.2 or to Messages andpress to select.2 or to Sent Items and press to select.When you select Sent Items and it contains notext messages, the display shows List Empty,and sounds a low tone if Keypad Tones are turnedon (see Turning Keypad Tones On or Off on page144).3 or to Delete All and press to select.4Choose one of the following.Advanced Features in Non-Connect Plus Mode112English
• or to Yes and press to select. Thedisplay shows positive mini notice.• or to No and press to return to theprevious screen.Receiving a Text MessageWhen your radio receives a message, the displayshows the alias or ID of the sender and the Messageicon at the far left of the screen.You can select Read when receiving a text message.Note:The radio exits the Text Message alert screenand sets up a Private or Group Call to thesender of the messageif the PTT button ispressed when the radio is displaying the alertscreen.Reading a Text Message1 or to Read? and press to select.Selected message in the Inbox opens.A subject line may be shown if the message isfrom an e-mail application.2Do one of the following:•Press to return to the Inbox.•Press a second time to reply, forward, ordelete the text message.Managing Received Text MessagesUse the Inbox to manage your text messages. TheInbox is capable of storing a maximum of 30messages.Text messages in the Inbox are sorted according tothe most recently received.Your radio supports the following options for textmessages:• Reply•Forward• Delete• Delete AllNote:If the channel type (i.e. conventional digital orCapacity Plus or Linked Capacity Plus) is nota match, you can only forward, delete, ordelete all Received messages.Advanced Features in Non-Connect Plus Mode113English
Note:Long press at any time to return to theHome screen.Viewing a Text Message from the Inbox1 to access the menu.2 or to Messages and press to select.3 or to Inbox and press to select.4 or to view the messages.A subject line may be shown if the message isfrom an e-mail application.5Do one of the following:•Press to select the current message, andpress again to reply, quick reply, forward,or delete that message.•Long press to return to the Homescreen.Viewing a Telemetry Status Text Message fromthe Inbox1 to access the menu.2 or to Messages and press to select.3 or to Inbox and press to select.4 or to the required message and press to select.You cannot reply to a Telemetry Status textmessage.The display shows Telemetry: <Status TextMessage>.5Long press to return to the Home screen.Replying to a Text Message from the Inbox1Access the Text Message feature.Advanced Features in Non-Connect Plus Mode114English
Radio Con-trolsStepsProgrammedText MessagebuttonPress the programmed TextMessage button.Menu 1 to access the menu.2 or to Messages andpress to select.2 or to Inbox and press to select.3 or to the required message and press to select.A subject line may be shown if the message isfrom an e-mail application.4Press once more to access the sub-menu.5Do one of the following:• or to Reply and press to select.• or to Quick Reply and press toselect.A blinking cursor appears.6Use your keypad to write/edit your message.7Press once message is composed.The display shows transitional mini notice,confirming your message is being sent.If the message is sent successfully, a tone soundsand the display shows positive mini notice.If the message cannot be sent, a low tone soundsand the display shows negative mini notice.If the message cannot be sent, the radio returnsyou to the Resend option screen (see ManagingFail-to-Send Text Messages on page 107).Deleting a Text Message from the Inbox1Access the Text Message feature by performingone of the following actions:Advanced Features in Non-Connect Plus Mode115English
Radio Con-trolsStepsProgrammedText MessagebuttonPress the programmed TextMessage button.Menu 1 to access the menu.2 or to Messages andpress to select.2 or to Inbox and press to select.3 or to the required message and press to select.A subject line may be shown if the message isfrom an e-mail application.4Press once more to access the sub-menu.5 or to Delete and press to select.6 or to Yes and press to select.The display shows positive mini notice and thescreen returns to the Inbox.Deleting All Text Messages from the Inbox1Access the Text Message feature by performingone of the following actions:Radio Con-trolsStepsProgrammedText MessagebuttonPress the programmed TextMessage button.Menu 1 to access the menu.2 or to Messages andpress to select.2 or to Inbox and press to select.When you select Inbox and it contains no textmessages, the display shows List Empty, andsounds a low tone if Keypad Tones are turned onAdvanced Features in Non-Connect Plus Mode116English
(see Turning Keypad Tones On or Off on page144).3 or to Delete All and press to select.4 or to Yes and press to select.The display shows positive mini notice.Job TicketsYour radio is able to receive Job Tickets, which aremessages from the dispatcher listing out tasks thatneed to be performed.You can respond to Job Tickets in order to sort theminto Job Ticket Folders. By default, the folders are“All", "New", "Started", and "Completed". Check withyour dealer or system administrator for an additional10 folders.Your radio supports a maximum of 100 Job Tickets,all of which can be seen in the "All" folder. New JobTickets and Job Tickets with recent change in stateare listed first. Upon reaching the maximum numberof Job Tickets, the next Job Ticket automaticallyreplaces the last Job Ticket in your radio.Note:Job Tickets are retained even after radio ispowered down and powered up again.Your radio will automatically detect anddiscard the duplicated Job Tickets with thesame subject line.Accessing the Job Ticket FolderAccess the Job Ticket folder.RadioControlStepsPro-gram-medJobTicketbutton1Press the programmed Job Ticketbutton.2 or to the required folder andpress to select.Note:You can also press and the corresponding num-ber key (1–9) to access therequired folder.Advanced Features in Non-Connect Plus Mode117English
RadioControlStepsMenu 1 to access the menu.2 or to Job Tickets andpress to select.3 or to the required folder andpress to select.Note:You can also press and the corresponding num-ber key (1–9) to access therequired folder.4 or to the required Job Ticketand press to select.Logging In and Out of the Remote ServerThis feature allows you to log in and log out of theremote server by using your user ID via the menu.1 to access the menu.2 or to Log In and press to select.If you are already logged in, menu displays LogOut.The display shows a transitional mini notice,confirming that you have been logged insuccessfully.If you have failed to log in, the display shows anegative mini notice.Creating and Sending a Job TicketYour radio is able to create Job Tickets, which isbased on a Job Ticket template and send out tasksthat need to be performed.Note:CPS is required to configure the Job Tickettemplate. Check with your dealer or systemadministrator to determine how your radio hasbeen programmed.1 to access the menu.Advanced Features in Non-Connect Plus Mode118English
2 or to Job Tickets and press toselect.3 or to Create Ticket and press toselect.4Depending on how your radio is configured, doone of the following:If ThenIf your radio isconfigured withone Job Tickettemplate,1Use the keypad to type therequired room number andpress to select.2 or to Room Statusand press to select.3 or to the requiredoption and press to se-lect.If your radio isconfigured withmore than one or to the required op-tion and press to select.If ThenJob Ticket tem-plate,5 or to Send and press to select.The display shows transitional mini notice,confirming your message is sent.If the message is not sent, the display showsnegative mini notice.Responding to the Job Ticket1 to access the menu.2 or to Job Tickets and press toselect.3 or to the required folder and press toselect.You can also press the corresponding number key(1–9) to access the required folder.Advanced Features in Non-Connect Plus Mode119English
4 or to the required Job Ticket and press to select.5Press once more to access the sub-menu.You can also press the corresponding number key(1–9) to Quick Reply.6 or to the required Job Ticket and press to select.You can also press the corresponding number key(1–9) to respond to the job ticket.The display shows transitional mini notice, confirmingyour message being sent.If the message is sent, a tone sounds and the displayshows positive mini notice.If the message is not sent, a low tone sounds and thedisplay shows negative mini notice.Deleting a Job TicketDelete a Job Ticket.RadioControlStepsPro-gram-medJobTicketbutton1Press the programmed Job Ticketbutton.2 or to All and press toselect.Menu 1 to access the menu.2 or to Job Tickets andpress to select.3 or to All and press toselect.4 or to the required Job Tick-et and press to select.Note:At Step 4, while viewing theJob Ticket, press todelete.Advanced Features in Non-Connect Plus Mode120English
RadioControlSteps5Press again while viewing theJob Ticket.6 or to Delete and press to select.Note:You can also press todelete.PrivacyIf enabled, this feature helps to preventeavesdropping by unauthorized users on a channelby the use of a software-based scrambling solution.The signaling and user identification portions of atransmission are not scrambled.Your radio must have privacy enabled on the channelto send a privacy-enabled transmission, although thisis not a necessary requirement for receiving atransmission. While on a privacy-enabled channel,the radio is still able to receive clear (unscrambled)transmissions.Your radio supports two types of privacy:• Basic Privacy.•Enhanced Privacy.Only one of the privacy types above can be assignedto the radio.To unscramble a privacy-enabled call or datatransmission, your radio must be programmed tohave the same Privacy Key (for Basic Privacy), or thesame Key Value and Key ID (for Enhanced Privacy)as the transmitting radio.If your radio receives a scrambled call that is of adifferent Privacy Key, or a different Key Value andKey ID, you will either hear a garbled transmission(Basic Privacy) or nothing at all (Enhanced Privacy).If the radio has a privacy type assigned, the Homescreen shows the Secure or Unsecure icon, exceptwhen the radio is sending or receiving an Emergencycall or alarm.The LED lights up solid green while the radio istransmitting and blinks green rapidly when the radio isreceiving an ongoing privacy-enabled transmission.Advanced Features in Non-Connect Plus Mode121English
You can access this feature by performing one of thefollowing actions:• Pressing the programmed Privacy button totoggle privacy on or off.• Using the Radio Menu as described by the stepsdescribed next.Note:Some radio models may not offer this Privacyfeature. Check with your dealer or systemadministrator for more information.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Privacy and press to select.You can also use or to changeselected option.5Press to enable/disable Privacy.The display shows beside Enabled.The disappears from beside Enabled.Covert ModeYour radio is capable of Covert Mode. During covertmode, all keypad and programmed button access areblocked. When enabled, all visual indications (display,LED's and backlight) are disabled.This feature allows audio or tone only via a wiredaccessory or a Bluetooth accessory.Entering Covert ModePress the button followed by the 2, 5, and 8numeric keys in tandem in home screen.Exiting Covert ModeTo exit Covert Mode, do one of the following:Advanced Features in Non-Connect Plus Mode122English
•Press the button followed by the 2, 5, and 8numeric keys in tandem. Radio will go back tonormal mode.• Power cycle the radio via the On/Off button.Dual Tone Multi Frequency (DTMF)The Dual Tone Multi Frequency (DTMF) featureallows the radio to operate in a radio system with aninterface to telephone systems.1Press and hold the PTT button to initiate a DTMFcall.2Enter the desired number, * or #.You can turn off the DTMF tone by disabling allradio tones and alerts (see Turning the RadioTones/Alerts On or Off on page 148).Multi-Site ControlsThese features are applicable when your currentradio channel is part of an IP Site Connect or LinkedCapacity Plus configuration.See IP Site Connect on page 43 and Linked CapacityPlus on page 44 for more details about theseconfigurations.Starting an Automatic Site SearchNote:The radio only scans for a new site if thecurrent signal is weak or when the radio isunable to detect any signal from the currentsite. If the RSSI value is strong, the radioremains on the current site.Start Automatic Site search byRadioControlsStepsSiteLockOn/OffbuttonPress the programmed Site LockOn/Off button to toggle the start/stopautomatic site search.Radiomenu 1 to access the menu.2 or to Utilities andpress to select.Advanced Features in Non-Connect Plus Mode123English
RadioControlsSteps3 or to Radio Settingsand press to select.4 or to Site Roaming andpress to select.5 or to Site Lock andpress to select.If the current channel is a multi-site channel withan attached roam list and is out of range, the radioalso performs an automatic site search (site isunlocked) during:• a PTT button press.• data transmission.A tone sounds and the display shows SiteUnlocked.The radio then returns to the Home screen. Thedisplay shows the Site Roaming icon and channelalias.The LED blinks yellow rapidly when the radio isactively searching for a new site, and turns offonce the radio locks on to a site.Stopping an Automatic Site SearchWhen your radio is actively searching for a newsite, you can stop the search byRadioControlsStepsSiteLockOn/OffbuttonPress the programmed Site LockOn/Off button to toggle the start/stopautomatic site search.Radiomenu 1 to access the menu.2 or to Utilities andpress to select.3 or to Radio Settingsand press to select.4 or to Site Roaming andpress to select.Advanced Features in Non-Connect Plus Mode124English
RadioControlsSteps5 or to Site Lock andpress to select.A tone sounds and the display shows SiteLocked.The radio then returns to the Home screen. TheLED turns off and the display shows the channelalias.Starting a Manual Site SearchStart a Manual Site Search byRadioControlsStepsManualSiteRoambuttonPress the programmed Manual SiteRoam button to start the manual sitesearch.Radiomenu 1 to access the menu.RadioControlsSteps2 or to Utilities andpress to select.3 or to Radio Settingsand press to select.4 or to Site Roaming andpress to select.5 or to Active Search andpress to select.A tone sounds, the display shows Finding Site,and the LED blinks green.If a new site is found, a tone sounds and the LEDturns off. The display shows Site <Alias>Found.If there is no available site within range, a tonesounds and the LED turns off. The display showsOut of Range.Advanced Features in Non-Connect Plus Mode125English
If a new site is within range, but the radio is unableto connect to it, a tone sounds and the LED turnsoff. The display shows Channel Busy.The radio returns to the Home screen.SecurityYou can enable or disable any radio in the system.For example, you might want to disable a stolenradio, to prevent the thief from using it, and enablethat radio, when it is recovered.Note:Performing Radio Disable and Enable islimited to radios with these functions enabled.Check with your dealer or systemadministrator for more information.Radio Disable1Access this feature byRadioCon-trolsStepsRadioDisablebutton1Press the programmed Radio Disa-ble button.2 or to the required alias or IDand press to select.Radiomenu 1 to access the menu.2 or to Contacts and press to select. The entries are alpha-betically sorted.3Use one of the steps described nextto select the required subscriberalias or ID:• Select the required alias or ID di-rectly.• or to the requiredalias or ID and press toselect.Advanced Features in Non-Connect Plus Mode126English
RadioCon-trolsSteps•Use the Manual Dial menu.• or to Manual Dialand press to select.• or to Radio Numberand press to select.• The first line of the displayshows Radio Number:. Thesecond line of the displayshows a blinking cursor. Usethe keypad to enter the sub-scriber alias or ID and press.4 or to Radio Disable andpress to select.The display shows Radio Enable: <SubscriberAlias or ID> and the LED lights up solid green.2Wait for acknowledgement.If successful, the radio sounds a positive indicatortone and the display shows positive mini notice.If not successful, the radio sounds a negativeindicator tone and the display shows negative mininotice.Do not press during the Radio Disableoperation as you will not get an acknowledgementmessage.Radio Enable1Access this feature byRadioCon-trolsStepsRadioEnablebutton1Press the programmed Radio Ena-ble button.2 or to the required alias or IDand press to select.Advanced Features in Non-Connect Plus Mode127English
RadioCon-trolsStepsRadiomenu 1 to access the menu.2 or to Contacts and press to select. The entries are alpha-betically sorted.3Use one of the steps described nextto select the required subscriberalias or ID• Select the required alias or ID di-rectly.• or to the requiredalias or ID and press toselect.•Use the Manual Dial menu.• or to Manual Dialand press to select.RadioCon-trolsSteps• or to Radio Numberand press to select.• The first line of the displayshows Radio Number:. Thesecond line of the displayshows a blinking cursor. Usethe keypad to enter the sub-scriber alias or ID and press.4 or to Radio Enable andpress to select.The display shows Radio Enable: <SubscriberAlias or ID> and the LED lights up solid green.2Wait for acknowledgement.If successful, the radio sounds a positive indicatortone and the display shows positive mini notice.Advanced Features in Non-Connect Plus Mode128English
If not successful, the radio sounds a negativeindicator tone and the display shows negative mininotice.Do not press during the Radio Enableoperation as you will not get an acknowledgementmessage.Lone WorkerThis feature raises an emergency if there is no useractivity, such as any radio button press or activationof the channel selector, for a predefined time.Before raising the emergency, when the inactivitytimer expires, the radio warns the user via an audioindicator.If there is still no acknowledgement by the userbefore the predefined reminder timer expires, theradio initiates an Emergency Alarm.Only one of the following Emergency Alarms can beassigned to this feature:• Emergency Alarm• Emergency Alarm with Call• Emergency Alarm with Voice to FollowThe radio remains in the emergency state allowingvoice messages to proceed until action is taken. See Emergency Operation on page 95 on ways to exitEmergency.Note:This feature is limited to radios with thisfunction enabled. Check with your dealer orsystem administrator for more information.Password Lock FeaturesIf enabled, this feature only allows you access yourradio if the correct password is entered uponpowering up.Accessing the Radio from Password1Power up your radio.You hear a continuous tone.2Do one of the following: • Enter your current four-digit password with theradio’s keypad. The second line of the displayshows . Press to proceed.Advanced Features in Non-Connect Plus Mode129English
•Enter your current four-digit password. Press or to edit each digit’s numeric value. Eachdigit changes to . Press to move to nextdigit. Press to confirm your selection.You hear a positive indicator tone for every digitentered. Press to remove the last on thedisplay. You hear a negative indicator tone, if youpress when the second line of the display isempty, or if you press more than four digits.If the password is correct, your radio proceeds topower up. See Powering Up the Radio on page24.If the password is incorrect, the display showsWrong Password. Repeat Steps 1 and 2.Password less than four digits is incorrect.After the third incorrect password, the displayshows Wrong Password and then, shows RadioLocked. A tone sounds and the LED double blinksyellow.Your radio enters into locked state for 15 minutes,and responds to inputs from On/Off Button andprogrammed Backlight button only.Note:The radio is unable to receive any call,including emergency calls, in locked state.Unlocking the Radio from Locked State1If your radio was powered down after being in thelocked state, power up the radio.A tone sounds and the LED double blinks yellow.The display shows Radio Locked.2Wait for 15 minutes.Your radio restarts the 15 minutes timer for lockedstate when you power up.3Repeat Steps 1 and in Accessing the Radio fromPassword on page 129.Turning the Password Lock On or Off1 to access the menu.Advanced Features in Non-Connect Plus Mode130English
2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Passwd Lock and press toselect.5Enter the four-digit password.See Step 2 in Accessing the Radio from Passwordon page 129.6Press to proceed.If the password is incorrect, the display showsWrong Password, and automatically returns to theprevious menu.7If the password entered in the previous step iscorrect, press to enable/disable passwordlock.The display shows beside Enabled.The disappears from beside Enabled.Changing the Password1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Passwd Lock and press toselect.5Enter the four-digit password.See Step 2 in Accessing the Radio from Passwordon page 129.6Press to proceed.If the password is incorrect, the display showsWrong Password, and automatically returns to theprevious menu.Advanced Features in Non-Connect Plus Mode131English
7If the password entered in the previous step iscorrect, or to Change Pwd and press to select.8Enter a new four-digit password.See Step 2 in Accessing the Radio from Passwordon page 129.9Reenter the previously entered four-digitpassword. See Step 2 in Accessing the Radiofrom Password on page 129.10 Press to proceed.If the reentered password matches the newpassword entered earlier, the display showsPassword Changed.If the reentered password does NOT match thenew password entered earlier, the display showsPasswords Do Not Match.The screen automatically returns to the previousmenu.Bluetooth OperationNote:If disabled via the CPS, all Bluetooth-relatedfeatures are disabled and the Bluetooth devicedatabase is erased.This feature allows you to use your radio with aBluetooth-enabled device (accessory) via a wirelessBluetooth connection. Your radio supports bothMotorola and COTS (Commercially available Off-The-Shelf) Bluetooth-enabled devices.Bluetooth operates within a range of 10 meters (32feet) line of sight. This is an unobstructed pathbetween your radio and your Bluetooth-enableddevice.It is not recommended that you leave your radiobehind and expect your Bluetooth-enabled device towork with a high degree of reliability when they areseparated.At the fringe areas of reception, both voice and tonequality will start to sound “garbled” or “broken”. Tocorrect this problem, simply position your radio andBluetooth-enabled device closer to each other (withinthe 10-meter/32 feet defined range) to re-establishAdvanced Features in Non-Connect Plus Mode132English
clear audio reception. Your radio’s Bluetooth functionhas a maximum power of 2.5 mW (4 dBm) at the 10-meter/32 feet range.Your radio can support up to 3 simultaneousBluetooth connections with Bluetooth-enableddevices of unique types. For example, a headset, ascanner, and a PTT-Only Device (POD). Multipleconnections with Bluetooth-enabled devices of thesame type are not supported.Refer to your respective Bluetooth-enabled device’suser manual for more details on your Bluetooth-enabled device’s full capabilities.Turning Bluetooth On and Off1 to access the menu.2 or to Bluetooth and press to select.3 or to My Status and press to select.The display shows On and Off. The current statusis indicated by a .4Do one of the following:• or to On and press to select. Thedisplay shows On and a appears left of theselected status.• or to Off and press to select. Thedisplay shows Off and a appears left of theselected status.Finding and Connecting to a Bluetooth DeviceDo not turn off your Bluetooth-enabled device orpress during the finding and connectingoperation as this cancels the operation.1Turn on your Bluetooth-enabled device and placeit in pairing mode. Refer to respective Bluetooth-enabled device’s user manual.2On your radio, press to access the menu.3 or to Bluetooth and press to select.4 or to Devices and press to select.5Do one of the following:Advanced Features in Non-Connect Plus Mode133English
• or to the required device and press to select.• or to Find Devices to locate availabledevices. or to the required device andpress to select.6 or to Connect and press to select.Display shows Connecting to <Device>. YourBluetooth-enabled device may require additionalsteps to complete the pairing. Refer to respectiveBluetooth-enabled device’s user manual.If successful, the radio display shows <Device>Connected. A tone sounds and appears besidesthe connected device. The Bluetooth Connected iconappears on the status bar.If unsuccessful, the radio display shows ConnectingFailed.Note:If pin code is required, use the same entrymethod as Step 2 in Accessing the Radio fromPassword on page 129.Finding and Connecting from a Bluetooth Device(Discoverable Mode)Do not turn off your Bluetooth or your radio during thefinding and connecting operation as this may cancelthe operation.1Turn Bluetooth On.See Turning Bluetooth On and Off on page 133.2 to access the menu.3 or to Bluetooth and press to select.4 or to Find Me and press to select.Your radio can now be found by other Bluetooth-enabled devices for a programmed duration. Thisis called Discoverable Mode.5Turn on your Bluetooth-enabled device and pair itwith your radio.Refer to respective Bluetooth-enabled device’suser manual.Advanced Features in Non-Connect Plus Mode134English
Connecting to a Paired Bluetooth DeviceDo not turn off your Bluetooth-enabled device orpress during the connecting operation as thiscancels the operation.The radio connects automatically to the pairedBluetooth-enabled device. If unsuccessful, follow theprocedure described next.1Turn on your Bluetooth-enabled device. Refer torespective Bluetooth-enabled device’s usermanual.2On your radio, press to access the menu.3 or to Bluetooth and press to select.4 or to Device and press to select.5 or to the required device and press toselect.6 or to Connect and press to select.Display shows Connecting to <Device>.If successful, the radio display shows<Device>Connected. A tone sounds and appearsbesides the connected device. The BluetoothConnected icon appears on the status bar.If unsuccessful, the radio display shows ConnectingFailed.Disconnecting from a Bluetooth Device1On your radio, press to access the menu.2 or to Bluetooth and press to select.3 or to Devices and press to select.4 or to the required device and press toselect.5 or to Disconnect and press to select.Display shows Disconnecting from <Device>.Your Bluetooth-enabled device may requireAdvanced Features in Non-Connect Plus Mode135English
additional steps to disconnect. Refer to respectiveBluetooth-enabled device’s user manual.The radio display shows <Device> Disconnected. Apositive indicator tone sounds and disappearsbeside the connected device. The BluetoothConnected icon disappears on the status bar.Switching Audio Route between Internal Radio Speakerand Bluetooth DeviceYou can toggle audio routing between internal radiospeaker and external Bluetooth-enabled accessory.Press the programmed Bluetooth Audio Switchbutton.•A tone sounds and display shows Route Audioto Radio.•A tone sounds and display shows Route Audioto Bluetooth.Viewing Device Details1 to access the menu.2 or to Bluetooth and press to select.3 or to Devices and press to select.4 or to the required device and press toselect.5 or to View Details and press toselect.Editing Device NameYou can edit the name of available Bluetooth-enableddevices.1 to access the menu.2 or to Bluetooth and press to select.3 or to Devices and press to select.4 or to the required device and press toselect.5 or to Edit Name and press to select.Advanced Features in Non-Connect Plus Mode136English
6Press to move one space to the left. Press tomove one space to the right. Press to deleteany unwanted characters. Long press tochange text entry method.A blinking cursor appears. Use the keypad to typethe required zone.7The display shows Device Name Saved.Deleting Device NameYou can remove a disconnected device from the listof Bluetooth-enabled devices.1 to access the menu.2 or to Bluetooth and press to select.3 or to Devices and press to select.4 or to the required device and press toselect.5 or to Delete and press to select.The display shows Device Deleted.Bluetooth Mic GainAllows control of the connected Bluetooth-enableddevice’s microphone gain value.1 to access the menu.2 or to Bluetooth and press to select.3 or to BT Mic Gain and press toselect.4 or to the BT Mic Gain type and the currentvalues.To edit values, press to select.5 or to increase or to decrease values andpress to select.Advanced Features in Non-Connect Plus Mode137English
Permanent Bluetooth Discoverable ModeNote:The Permanent Bluetooth Discoverable Modecan only be enabled via the MOTOTRBOCPS. If enabled, the Bluetooth item will notbe displayed in the Menu and you will not beable to use any Bluetooth programmablebutton features.Other Bluetooth-enabled devices can locate yourradio, but the devices cannot connect to the radio. Itenables dedicated devices to use your radio positionin the process of Bluetooth-based location.Notification ListYour radio has a Notification List that collects all your“unread” events on the channel, such as unread textmessages, telemetry messages and missed calls.Unread Job Tickets are also stored in the notificationlist.The Notification icon appears on the status bar whenthe Notification List has one or more events.For TMS and missed call/call alert notification events,the maximum number are 30 TMS and 10 missedcalls/call alerts. This maximum number depends onindividual feature (job tickets or TMS or missed calls/call alerts) list capability.Note:After the events are read, they are removedfrom the Notification List.Accessing the Notification List1 to access the menu.2 or to Notification and press toselect.3 or to the required event and press toselect.Long press to return to the Home Screen.Over-the-Air-Programming (OTAP)Your radio can be updated by your dealer remotely,via OTAP, without needing to be physicallyconnected. Additionally, some settings can also beconfigured via OTAP.While undergoing OTAP, the LED blinks green.Advanced Features in Non-Connect Plus Mode138English
Note:When the radio is receiving high volume data,the High Volume Data icon appears andchannel is busy. A PTT button press at thistime may cause a negative tone to sound.Once the programming is complete, depending onyour radio’s configuration:•A tone sounds, the display shows UpdatingRestarting, and your radio restarts (powers offand on again).•Select between Restart Now or Postpone.Selecting Postpone allows your radio to return tothe previous display, with an OTAP Timer iconvisible, for a period of time before the automaticrestart occurs.Upon power up after the automatic restart occurs, thedisplay shows Sw Update Completed if the OTAPupdate is successful or Sw Update Failed if theOTAP update is unsuccessful.See Software Update on page 171 for your updatedsoftware version.Wi-Fi OperationWi-Fi® is a registered trademark of Wi-Fi Alliance®.Note:This feature is applicable to SL7550e/SL7590e/SL7580e only.This feature allows you to setup and connect to a Wi-Fi® network. Wi-Fi supports updates for radiofirmware, codeplug, and resources such as languagepacks and voice announcement.Turning Wi-Fi On or OffNote:This feature is applicable to SL7550e/SL7590e/SL7580e only.The programmed Wi-Fi On or Off button isassigned via CPS. Check with your dealer orsystem administrator to determine how yourradio has been programmed.You can turn on or turn off Wi-Fi® by performing oneof the following actions.•Press the programmed Wi-Fi On or Off button.Voice Announcement sounds Turning On Wi-Fi orTurning Off Wi-Fi.•Access this feature via the menu.a) Press to access the menu.Advanced Features in Non-Connect Plus Mode139English
b) Press or to WiFi and press toselect.c) Press or to WiFi Status and press to select.Press to turn on Wi-Fi. The display shows beside Enabled.Press to turn off Wi-Fi. The disappearsfrom beside Enabled.If Wi-Fi is enabled and a low capacity battery is used,an alert screen is displayed upon power up with thefollowing notice.•Low Capacity Battery!•Tx power restricted to 2W and Wi-Fidisabled.•Use a compatible battery to liftrestriction.•Press to continue.Lift the restriction to enable 3W operation and Wi-Fiby performing the following action. Power off the radioand change to a compatible battery such as Lithium-Ion 1800 mAh Battery Pack (HKNN4013_) andLithium-Ion 2200 mAh Battery Pack (PMNN4459_) orLithium-Ion 2300mAh Battery Pack (PMNN4468_).If Wi-Fi is disabled and a low capacity battery is used,the transmit power is restricted to 2W.Connecting to a Network Access PointNote:This feature is applicable to SL7550e/SL7590e/SL7580e only.When you turn on Wi-Fi®, the radio scans andconnects to a network access point.You can also connect to a network access point viathe menu.1Press to access the menu.2Press or to WiFi and press to select.3Press or to Networks and press toselect.Advanced Features in Non-Connect Plus Mode140English
4Press or to a network access point andpress to select.5Press or to Connect and press toselect.6Enter the password and press .When the connection is successful, the radiodisplays a notice and the network access point issaved into the profile list.Refreshing the Network ListNote:This feature is applicable to SL7550e/SL7590e/SL7580e only.•Perform the following actions to refresh thenetwork list.a) Press to access the menu.b) Press or to WiFi and press toselect.c) Press or to Networks and press toselect.When you enter the Networks menu, the radioautomatically refreshes the network list.•If you are already in the Networks menu, performthe following action to refresh the network list.a) Press or to Refresh and press toselect.The radio refreshes and displays the latestnetwork list.Adding a NetworkNote:This feature is applicable to SL7550e/SL7590e/SL7580e only.If a preferred network is not in the available networklist, perform the following actions to add a network.1Press to access the menu.2Press or to WiFi and press to select.Advanced Features in Non-Connect Plus Mode141English
3Press or to Networks and press toselect.4Press or to Add Network and press toselect.5Enter the Service Set Identifier (SSID) and press.6Press or to Open and press to select.7Enter the password and press .The radio displays to indicate that thenetwork is successfully saved.Viewing Details of Network Access PointsNote:This feature is applicable to SL7550e/SL7590e/SL7580e only.Perform the following actions to view details ofnetwork access points.1Press to access the menu.2Press or to WiFi and press to select.3Press or to Networks and press toselect.4Press or to a network access point andpress to select.5Press or to View Details and press to select.For a connected network access point, the ServiceSet Identifier (SSID), Security Mode, MediaAccess Control (MAC) address, and InternetProtocol (IP) address are displayed.For a non-connected network access point, theService Set Identifier (SSID) and Security Modeare displayed.Advanced Features in Non-Connect Plus Mode142English
Removing Network Access PointsNote:This feature is applicable to SL7550e/SL7590e/SL7580e only. Enterprise networkaccess points that are added via CPS can onlybe removed via CPS.Perform the following actions to remove networkaccess points from the profile list.1Press to access the menu.2Press or to WiFi and press to select.3Press or to Networks and press toselect.4Press or to the selected network accesspoint and press to select.5Press or to Remove and press toselect.6Press or to Yes and press to select.The radio displays to indicate that theselected network access point is successfullyremoved.UtilitiesLocking and Unlocking the KeypadYou can lock your radio’s keypad to avoid inadvertentkey entry.To lock/unlock your radio’s keypad.Option StepsLockingthe Key-pad1 to access the menu.2 or to Utilities andpress to select.3 or to Radio Settingsand press to select.4 or to Keypad Lock andpress to select.Advanced Features in Non-Connect Plus Mode143English
Option StepsYou can also use or tochange the selected option.Unlockingthe Key-padPress followed by .After the keypad is locked, the display showsKeypad Locked and returns to the Home screen.After the keypad is unlocked, the display showsKeypad Unlocked and returns to the Homescreen.Turning Keypad Tones On or OffYou can enable and disable keypad tones if needed.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Tones/Alerts and press toselect.5 or to Keypad Tones and press toselect.You can also use or to change the selectedoption.6Press to enable/disable keypad tones.The display shows beside Enabled.The disappears from beside Enabled.Setting the Power LevelNote:This feature is not applicable in Citizens Bandchannels that are in the same frequency.This feature is applicable to SL7550e/SL7590e/SL7580e only with a frequency bandAdvanced Features in Non-Connect Plus Mode144English
width of 403MHz–470MHz or470.000005MHz–527MHz. Select the value ofhigh transmit power in CPS. Check with yourdealer or system administrator to determinehow your radio has been programmed.You can customize the power setting of the radio tohigh or low for each channel.High enables communication with radios located at aconsiderable distance from you. Low enablescommunication with radios in closer proximity.Press the programmed Power Level button to toggletransmit power level between high and low. Followthe procedure described next to access this featurevia the radio menu.1Press to access the menu.2Press or to Utilities and press toselect.3Press or to Radio Settings and press to select.4Press or to Power and press to select.5Press or to the required setting and press to select. appears beside selected setting. At any time,long press to return to the Home screen.Screen returns to the previous menu.Turning the Option Board Feature(s) On or OffA channel can support up to 6 option board features.Refer to your dealer or system administrator for moreinformation.Press the programmed Option Board Featurebutton to toggle the feature on or off.Identifying Cable TypeYou can select the type of cable your radio uses.1 to access the menu.2 or to Utilities and press to select.Advanced Features in Non-Connect Plus Mode145English
3 or to Radio Settings and press toselect.4 or to Cable Type and press to select.You can also use or to change the selectedoption.5The current cable type is indicated by a .Turning the Voice Operating Transmission (VOX)Feature On or OffThis feature allows you to initiate a hands-free voiceactivated call on a programmed channel. The radioautomatically transmits, for a programmed period,whenever the microphone on the VOX-capableaccessory detects voice.Pressing the PTT button during radio operation willdisable VOX. To re-enable VOX, do one of thefollowing:• Turn the radio off and power it on again.•Press the programmed VOX button to toggle thefeature on or off.• Follow the steps described next to access thisfeature via the radio menu.Note:Turning this feature on or off is limited toradios with this function enabled. Check withyour dealer or system administrator for moreinformation.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to VOX and press to select.5Press to disable/enable VOX.The display shows beside Enabled.The disappears from beside Enabled.Advanced Features in Non-Connect Plus Mode146English
Setting the Display Backlight TimerYou can set the the radio’s display backlight timer asneeded. The setting also affects the Menu NavigationButtons and keypad backlighting accordingly.Press the programmed Backlight button to toggle thebacklight settings, or follow the procedure describednext to access this feature via the radio menu.The display backlight and keypad backlighting areautomatically turned off if the LED indicator isdisabled (see Turning the LED Indicator On or Off onpage 154).1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Display and press to select.5 or to Backlight Timer and press toselect.You can use or to change the selectedoption.Turning the Backlight Auto On or OffYou can enable and disable the radio’s backlight toturn on automatically if needed. If enabled, thebacklight is turned on when the radio receives a call,Notification List event, or Emergency Alarm.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Backlight Auto.5Press to enable/disable the Backlight Auto.The display shows beside Enabled.The disappears from beside Enabled.Advanced Features in Non-Connect Plus Mode147English
Turning the Radio Tones/Alerts On or OffYou can enable and disable all radio tones and alerts(except for the incoming Emergency alert tone) ifneeded.Press the programmed All Tones/Alerts button totoggle all tones on or off, or follow the proceduredescribed next to access this feature via the radiomenu.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Tones/Alerts and press toselect.5 or to All Tones and press to select.6Press to enable/disable all tones and alerts.The display shows beside Enabled.The disappears from beside Enabled.Setting the Tone Alert Volume Offset LevelYou can adjust the Tone Alert Volume Offset level ifneeded. This feature adjusts the volume of the tones/alerts, allowing it to be higher or lower than the voicevolume.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Tones/Alerts and press toselect.5 or to Vol. Offset and press toselect.6 or to the required volume value.Advanced Features in Non-Connect Plus Mode148English
The radio sounds a feedback tone with eachcorresponding volume value.7Do one of the following:•Press to keep the required displayedvolume value.•Press to exit without changing thecurrent volume offset settings.• Repeat Step 6 to select another volume value.Turning the Talk Permit Tone On or OffYou can enable and disable the Talk Permit Tone ifneeded.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Tones/Alerts and press toselect.5 or to Talk Permit and press toselect.You can also use or to change the selectedoption.6Press to enable/disable the Talk Permit Tone.The display shows beside Enabled.The disappears from beside Enabled.Setting the Text Message Alert ToneYou can customize your radio’s text message alerttone to Momentary or Repetitive for each entry in theContacts list.1 to access the menu.2 or to Contacts and press to select.Advanced Features in Non-Connect Plus Mode149English
3 or to the required subscriber alias or IDand press to select.4 or to Message Alert and press toselect.The display shows Momentary and Repetitive.You can also use or to change the selectedoption.5 or to the required setting and press toenable. appears besides selected setting.Changing the Display ModeYou can change radio’s display mode between Dayor Night, as needed. This affects the color palette ofthe display.Change the Display Mode:RadioControlStepsPro-gram-medDisplayModeButtonPress the programmed Display Modebutton.Menu 1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings andpress to select.4 or to Display and press to select.The display shows Day Mode andNight Mode.Advanced Features in Non-Connect Plus Mode150English
RadioControlStepsNote:You can also use or tochange the selected option.5 or to the required settingand press to enable. appearsbesides selected setting.Adjusting the Display BrightnessYou can adjust the display brightness of the radio asneeded.Note:Display brightness cannot be adjusted whenAuto Brightness is enabled.Adjust the Display Brightness by performing one ofthe following actions:RadioControlStepsPro-gram-med Dis-playBright-nessButton1Press the programmed Brightnessbutton.2Decrease display brightness bypressing or increase the displaybrightness by pressing . Selectfrom setting of 1 to 8. Press toconfirm your entry.Menu 1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings andpress to select.4 or to Brightness andpress to select.The display shows a progress bar.Advanced Features in Non-Connect Plus Mode151English
RadioControlSteps5Decrease display brightness bypressing or increase the displaybrightness by pressing . Selectfrom setting of 1 to 8. Press toconfirm your entry.Wallpaper ModeYour radio displays the Wallpaper background onhome screen. The user can select from 5 defaultwallpapers.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Display and press to select.5 or to Wallpaper and press to select.You can also use or to change the selectedoption.Screen Saver ModeThe screen saver feature allows the radio to saveradio battery time. A Screen Saver Pre Durationis used to track the radio activities before enteringscreen saver mode.Radio starts Screen Saver Pre Duration uponpower up. Radio enters into screen saver mode whenScreen Saver Pre Duration timer expires, theradio exits screen saver mode and responds torelated transaction normally upon any user input andover the air transaction.Radio restarts Screen Saver Pre Duration uponany user input and over the air transaction. Afterbeing in Screen Saver mode for 5 seconds, radioenters keypad lock state automatically. When anyaudio or Bluetooth accessory is connected, batterysaver mode is enabled, radio enters screen savermode.Advanced Features in Non-Connect Plus Mode152English
If there is any user input or over the air transaction,the radio exits screen saver mode and responds touser interaction. The Screen Saver Pre Durationis restarted and the radio goes back to screen savermode when it expires.Note:The screen saver mode is to help improvebattery life.Audio AccessoryThe audio accessory has two modes: Normal andBattery Saver mode. When audio accessory isplugged in and the setting is in Battery Saver Mode,the radio restarts the timer and goes into screensaver mode. In this scenario, when there is any userinput (including user input on radio and accessoryattachment/detachment) or when receivingemergency alarm/call, the radio exits screen savermode and responds to user event as normal. TheScreen Saver timer restarts and the radio goes backto screen saver mode when the time allocatedexpires.Auto Keypad LockYou can enable/disable your radio’s auto keypad lockto avoid inadvertent key entry.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Auto Keypad Lock and press toselect.5Do one of the following:•Press to enable Auto Keypad Lock. Thedisplay shows beside Enabled.•Press to disable Auto Keypad Lock. The disappears from beside Enabled.LanguageYou can set your radio display to be in your requiredlanguage.1 to access the menu.Advanced Features in Non-Connect Plus Mode153English
2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Languages and press to select.5 or to the required language and press to enable. appears beside selected language.Turning the LED Indicator On or OffYou can enable and disable the LED Indicator ifneeded.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to LED Indicator and press toselect.You can also use or to change the selectedoption.5Press to enable/disable the LED Indicator.The display shows beside Enabled.The disappears from beside Enabled.Turning the Voice Announcement On or OffNote:The Voice Announcement feature can only beenabled via the MOTOTRBO CPS. If enabled,the Text-to-Speech feature is automaticallydisabled, and vice versa.This feature enables the radio to audibly indicate thecurrent Zone or Channel the user has assigned, orprogrammable button press. This audio indicator canbe customized per customer requirements. This istypically useful when the user is in a difficult conditionto read the content shown on the display.Toggle Voice Announcement On or Off.Advanced Features in Non-Connect Plus Mode154English
RadioControlStepsProgram-med VoiceAn-nounce-ment But-tonPress the programmed Voice An-nouncement button.Menu 1 to access the menu.2 or to Utilities andpress to select.3 or to Radio Settingsand press to select.4 or to Voice Announce‐ment and press to select.Note:You can also use or to change the selectedoption.5Do one of the following:RadioControlSteps•Press to enable Voice An-nouncement. The displayshows beside Enabled.•Press to disable Voice An-nouncement. The disap-pears from beside Enabled.Setting the Text-to-Speech FeatureNote:The Text-to-Speech feature can only beenabled via the MOTOTRBO CustomerProgramming Software. If enabled, the VoiceAnnouncement feature is automaticallydisabled, and vice versa. Check with yourdealer or system administrator for moreinformation.This feature enables the radio to audibly indicate thefollowing features:• Current Channel•Current ZoneAdvanced Features in Non-Connect Plus Mode155English
• Programmed button feature on or off• Content of received text messages•Content of received Job TicketsThis audio indicator can be customized per customerrequirements. This is typically useful when the user isin a difficult condition to read the content shown onthe display.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Voice Announcement and press to select.5 or to any of the following features andpress to select.You can also use or to change the selectedoption.•All•Messages•Job Tickets•Channel•Zone•Program Button appears beside the selected setting.Digital Mic AGC (Mic AGC-D)This feature controls the your radio's microphone gainautomatically while transmitting on a digital system. Itsuppresses loud audio or boosts soft audio to apreset value in order to provide a consistent level ofaudio.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.You can also use or to change the selectedoption.Advanced Features in Non-Connect Plus Mode156English
4 or to Mic AGC-D and press to select.5Do one of the following:•Press to enable Mic AGC-D. The displayshows beside Enabled.•Press to disable Mic AGC-D. The disappears from beside Enabled.Switching Audio Route between Internal Radio Speakerand Wired AccessoryYou can toggle audio routing between the internalradio speaker and the speaker of wired accessoryprovided that:• The wired accessory with speaker is attached.•The audio is not routed to an external Bluetooth-enabled accessory.• The radio is not in Covert Mode.Powering down the radio or detaching the accessoryresets the audio routing to the internal radio speaker.Press the programmed Audio Toggle button totoggle audio routing between the internal radiospeaker and the speaker of wired accessory.Intelligent AudioYour radio can automatically adjust its audio volumeto overcome background noise in the environment,inclusive of all stationary and non-stationary noisesources. This feature is a Receive-only feature anddoes not affect Transmit audio.Note:This feature is not applicable during aBluetooth session.Toggle Intelligent Audio On or Off.RadioControlStepsPro-gram-med In-telligentAudioButtonPress the programmed Intelligent Au-dio button.Advanced Features in Non-Connect Plus Mode157English
RadioControlStepsMenu 1 to access the menu.2 or to Radio Settings andpress to select.3 or to Radio Settings andpress to select.4 or to Intelligent Audioand press to select.Note:You can also use or to change the selected op-tion.5Do one of the following:•Press to enable IntelligentAudio. The display shows be-side Enabled.RadioControlSteps•Press to disable IntelligentAudio. The disappears frombeside Enabled.See Authorized Accessories List on page 281 forrecommended Bluetooth-enabled audio accessorieswith in-built Automatic Volume Control for similarperformance.Turning the Acoustic Feedback Suppressor Feature Onor OffThis feature allows you to minimize acoustic feedbackin received calls.Toggle the Acoustic Feedback SuppressorFeature On or Off by performing one of thefollowing actions:RadioControlStepsProgram-medAcousticPress the programmed AcousticFeedback Suppressor button.Advanced Features in Non-Connect Plus Mode158English
RadioControlStepsFeedbackSuppres-sor But-tonMenu 1 to access the menu.2 or to Utilities andpress to select.3 or to Radio Settingsand press to select.4 or to AF Suppressor andpress to select.Note:You can also use or to change the selected op-tion.5Do one of the following:RadioControlSteps•Press to enable AcousticFeedback Suppressor. Thedisplay shows beside Ena-bled.•Press to disable AcousticFeedback Suppressor. The disappears from beside Ena-bled.Setting the Audio AmbienceYou can customize the audio ambience of the radioaccording to your environment.Default enables the default factory settings.Loud enables Noise Suppressor and increasesspeaker loudness for use in noisy surroundings.Work Group enables AF Suppressor and disablesAGC for use when a group of radios are near to eachother.Advanced Features in Non-Connect Plus Mode159English
1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Audio Ambience and press toselect.5 or to the required setting and press toselect.You can also use or to change the selectedoption. appears beside the selected setting.Screen returns to the previous menu.Setting the Audio ProfilesYou can customize the audio profiles of the radioaccording to your preference.Default disables the previously selected audioprofile and the radio’s audio profile returns to normal.Level 1, Level 2, and Level 3 are audio profilesintended to compensate for noise-induced hearingloss that is typical for adults in their 40’s, 50’s, and60’s or over.Treble Boost, Mid Boost, and Bass Boost are fora tinnier sound, a more nasal sound, and a deepersound.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Audio Profiles and press toselect.5 or to the required setting and press toselect.Advanced Features in Non-Connect Plus Mode160English
You can also use or to change the selectedoption. appears beside the selected setting.Screen returns to the previous menu.Text Entry ConfigurationYou can configure the following settings for enteringtext on your radio:• Word Predict• Word Correct• Sentence Cap• My WordsYour radio supports the following text entry methods:• Numbers• Symbols• Predictive or Multi-Tap• Language (If programmed)Note:Press at any time to return to theprevious screen or long press to returnto the Home Screen. The radio exits thecurrent screen once the inactivity timerexpires.Word PredictYour radio can learn common word sequences thatyou often enter. It then predicts the next word youmay want to use after you enter the first word of acommon word sequence into the text editor.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Text Entry and press to select.5 or to Word Predict and press toselect.You can also use or to change the selectedoption.6Do one of the following:Advanced Features in Non-Connect Plus Mode161English
•Press to enable Word Predict. The displayshows beside Enabled.•Press to disable Word Predict. The disappears from beside Enabled.Word CorrectSupplies alternative word choices when the wordentered into the text editor is not recognized by the in-built dictionary.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Text Entry and press to select.5 or to Word Correct and press toselect.You can also use or to change the selectedoption.6Do one of the following:•Press to enable Word Correct. The displayshows beside Enabled.•Press to disable Word Correct. The disappears from beside Enabled.Sentence CapAutomatically enables capitalization for the first letterin the first word for every new sentence.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Text Entry and press to select.Advanced Features in Non-Connect Plus Mode162English
5 or to Sentence Cap and press toselect.6Do one of the following:•Press to enable Sentence Cap. The displayshows beside Enabled.•Press to disable Sentence Cap. The disappears from beside Enabled.Viewing Custom WordsYou can add your own custom words into your radio’sin-built dictionary. Your radio maintains a list tocontain these words.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Text Entry and press to select.5 or to My Words and press to select.6 or to List of Words and press toselect.Display shows the list of custom words.Editing Custom WordYou can edit the custom words saved in your radio.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Text Entry and press to select.5 or to My Words and press to select.Advanced Features in Non-Connect Plus Mode163English
6 or to List of Words and press toselect.Display shows the list of custom words.7 or to the required word and press toselect.8 or to Edit and press to select.9Use the keypad to edit your custom word.Press to move one space to the left. Press orthe key to move one space to the right.Press the key to delete any unwantedcharacters. Long press to change text entrymethod. Press once your custom word iscompleted.The display shows transitional mini notice, confirmingyour custom word is being saved.If the custom word is saved, a tone sounds and thedisplay shows positive mini notice.If the custom word is not saved, a low tone soundsand the display shows negative mini notice.Adding Custom WordYou can add your own custom words into your radio’sin-built dictionary.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Text Entry and press to select.5 or to My Words and press to select.6 or to Add New Word and press toselect.Display shows the list of custom words.7Use the keypad to edit your custom word.Advanced Features in Non-Connect Plus Mode164English
Press to move one space to the left. Press orthe key to move one space to the right.Press the key to delete any unwantedcharacters. Long press to change text entrymethod. Press once your custom word iscompleted.The display shows transitional mini notice, confirmingyour custom word is being saved.If the custom word is saved, a tone sounds and thedisplay shows positive mini notice.If the custom word is not saved, a low tone soundsand the display shows negative mini notice.Deleting a Custom WordYou can delete the custom words saved in your radio.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Text Entry and press to select.5 or to My Words and press to select.6 or to the required word and press toselect.7 or to Delete and press to select.8Choose one of the following.•At Delete Entry?, press to select Yes.The display shows Entry Deleted.• or to No and press to return to theprevious screen.Deleting All Custom WordsYou can delete all custom words from your radio’s in-built.Advanced Features in Non-Connect Plus Mode165English
1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Text Entry and press to select.5 or to My Words and press to select.6 or to Delete All and press to select.7Choose one of the following.•At Delete Entry?, press to select Yes.The display shows Entry Deleted.• or to No and press to return to theprevious screen.Flexible Receive ListFlexible Receive List is a digital-only (currentlysupported in Capacity Plus and Linked Capacity Plus)feature that allows you to add, delete or edit memberson the receive talkgroup list. Your radio can support amaximum of 16 members in the list.Turning the Flexible Receive List On or OffYou can enable and disable the Flexible Receive Listif needed.Enable the Flexible Receive List by performingone of the following actions:Radio Con-trolStepsProgrammedFlexible Re-ceive ListButtonPress the programmed FlexibleReceive List button.Menu 1 to access the menu.2 or to Flexible RxList and press to select.Advanced Features in Non-Connect Plus Mode166English
Radio Con-trolSteps3Press to enable or disablethe Flexible Receive List fea-ture.PreviousdisplayCurrent displayTurn On Flexible Rx List OnTurn Off Flexible Rx List OffAdding a New Entry to the Flexible Receive List1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Flexible Rx List and press toselect.5 or to View/Edit List and press toselect.6 or to Add Member and press to select.7Select the required alias or ID by performing oneof the following actions:RadioControlStepsRadioNaviga-tion But-tons or to the required alias or ID.Keypad Key in the first character of the re-quired alias.A blinking cursor appears.Advanced Features in Non-Connect Plus Mode167English
RadioControlStepsPress to move one space to the left.Press to move one space to theright. Press the key to deleteany unwanted characters. Long press to change the text entry meth-od.The first line of the display shows thecharacters you keyed in. The nextlines of the display show the short list-ed search results. The alias search iscase-insensitive. If there are two ormore aliases with the same name, theradio displays the alias that is listedfirst in the list.8Press to select.The display shows Add Another?.9 or to No and press to selectThe display shows .Deleting an Entry from the Flexible Receive List1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Flexible Rx List and press toselect.5 or to View/Edit List and press toselect.6Select the required alias or ID by performing oneof the following actions:RadioControlStepsRadioNaviga- or to the required alias or ID.Advanced Features in Non-Connect Plus Mode168English
RadioControlStepstion But-tonsKeypad Key in the first character of the re-quired alias.A blinking cursor appears.Press to move one space to the left.Press to move one space to theright. Press the key to deleteany unwanted characters. Long press to change the text entry meth-od.The first line of the display shows thecharacters you keyed in. The nextlines of the display show the short list-ed search results. The alias search iscase-insensitive. If there are two ormore aliases with the same name, theRadioControlStepsradio displays the alias that is listedfirst in the list.7Press to select.8 or to Delete and press to select.9 or to Yes and press to select.The display shows .Accessing General Radio InformationYour radio contains information on the following:• Battery•Radio Alias and ID• Firmware and Codeplug Versions• Open-Source Software Information• Software Update• Site InformationAdvanced Features in Non-Connect Plus Mode169English
Press at any time to return to the previousscreen or long press to return to the Homescreen. The radio exits the current screen once theinactivity timer expires.Accessing the Battery InformationDisplays information on your radio battery.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Info and press to select.4 or to Battery Info and press toselect.The display shows the battery information.For IMPRES batteries ONLY: The display readsRecondition Battery if the battery requiresreconditioning in an IMPRES charger. After thereconditioning process, the display then shows thebattery information.Checking the Radio Alias and IDThis feature displays the ID of your radio.Press the programmed Radio Alias and ID button tocheck your radio alias and ID. You hear a positiveindicator tone.Follow the procedure described next to access thisfeature via the radio screen.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Info and press to select.4 or to My ID and press to select.The first line of the display shows the radio alias.The second line of the display shows the radio ID.Checking the Firmware Version and CodeplugVersionDisplays the firmware version on your radio.Advanced Features in Non-Connect Plus Mode170English
1 to access the menu.2 or to Utilities and press to select.3 or to Radio Info and press to select.4 or to Versions and press to select.The display shows the current firmware andcodeplug versions.Checking the Open-Source Software InformationDisplays the open-source software (OSS) informationon your radio.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Info and press to select.4 or to Versions and press to select.The display shows the Firmware Versioninformation.Software UpdateDisplays the date and time of the latest softwareupdate carried out via Over-the-Air Programming.Note:Software Update menu is only available afterat least one successful OTAP session.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Info and press to select.4 or to SW Update and press to select.The display shows the date and time of the latestsoftware update.See Over-the-Air-Programming (OTAP) on page 138for details on OTAP session.Advanced Features in Non-Connect Plus Mode171English
Site InformationDisplays the current Linked Capacity Plus site nameyour radio is on.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Info and press to select.4 or to Site Info and press to select.The display shows the current Linked CapacityPlus site name.See Linked Capacity Plus on page 44 for details onLinked Capacity Plus.Checking the RSSI ValuesYour radio shows the Received Signal StrengthIndicator (RSSI) icon at the top of your display. Thisfeature allows you to view the RSSI values.On the home screen, press three times andimmediately press , all within 5 seconds.The display shows current RSSI values. Longpress the to return to the Home Screen.See Display Icons on page 35 for details on RSSIicon.Advanced Features in Non-Connect Plus Mode172English
Connect Plus OperationsConnect Plus Operations173English
Additional Radio Controls in ConnectPlus ModePush-To-Talk (PTT) ButtonThe PTT button on the side of the radio ( ) servestwo basic purposes:A• While a call is in progress, the PTT button allowsthe radio to transmit to other radios in the call.Press and hold the PTT button to talk. Release thePTT button to listen.The microphone is activated when the PTT buttonis pressed.•While a call is not in progress, the PTT button isused to make a new call (see Making a Radio Callon page 189).If the Talk Permit Tone (see Turning the Talk PermitTone On or Off on page 149) is enabled, wait until theshort alert tone ends before talking.Programmable ButtonsYour dealer can program the programmable buttonsas shortcuts to radio functions depending on theduration of a button press:Short press Pressing and releasing rapidly.Long press Pressing and holding for theprogrammed duration.Press and hold Keeping the button pressed.Note:The programmed duration of a button press isapplicable for all assignable radio/utilityfunctions or settings. See EmergencyOperation on page 216 for more informationAdditional Radio Controls in Connect Plus Mode174English
on the programmed duration of theEmergency button.Assignable Radio FunctionsActions A programmable button toaccess a CPS programmableaction list.Bluetooth® AudioSwitchToggles audio routing betweeninternal radio speaker andexternal Bluetooth-enabledaccessory.Busy QueueCancellationExits the busy mode when anon-Emergency call in theBusy Queue was initiated.Emergency calls, onceaccepted into the Busy Queue,cannot be cancelled.Call Log Selects the call log list.Contacts Provides direct access to theContacts list.Emergency On/Off Depending on theprogramming, initiates orcancels an emergency.Intelligent Audio Toggles intelligent audio on oroff.Manual Dial Depending on theprogramming, initiates aPrivate or Phone Call bykeying in any subscriber ID orphone number.One Touch Access Directly initiates a predefinedPrivate Call, a Call Alert or aQuick Text message.Privacy Toggles privacy on or off.Radio Check Determines if a radio is activein a system.Radio Enable Allows a target radio to beremotely enabled.Radio Disable Allows a target radio to beremotely disabled.Remote Monitor Turns on the microphone of atarget radio without it givingany indicators.Roam Request Requests to search for adifferent site.Additional Radio Controls in Connect Plus Mode175English
Scan Toggles scan on or off.Site Lock On/Off When toggled on, the radiosearches the current site only.When toggled off, the radiosearches other sites inaddition to the current site.Text Message Selects the text messagemenu.VoiceAnnouncement forChannelPlays zone and channelannouncement voicemessages for the currentchannel. This function isunavailable when VoiceAnnouncement is disabled.VoiceAnnouncementOn/OffToggles voice announcementon or off.Zone Allows selection from a list ofzones.Assignable Settings or Utility FunctionsAF Suppressor Toggles the Acoustic FeedbackSuppressor feature on or off.All Tones/Alerts Toggles all tones and alerts on oroff.Backlight Toggles display backlight on oroff.Brightness Allows brightness to be set viathe manual brightness mode orauto brightness control via theradio’s photo sensor.Display Mode Toggles the day/night displaymode on or off.Keypad Lock Toggles keypad between lockedand unlocked.Unassigned Indicates that the button functionhas not yet been assigned.Wallpaper Displayed on home screen.Identifying Status Indicators in Connect PlusModeDisplay IconsYour radio has a 2 inch landscape display with QVGA(Quarter Video Graphics Array) 16-bit colorresolution.Additional Radio Controls in Connect Plus Mode176English
The following are icons that appear on the display ofthe radio. Icons are displayed arranged left-most inorder of appearance/usage.Received Signal Strength Indicator(RSSI)The number of bars displayed repre-sents the radio signal strength. Fourbars indicate the strongest signal. Thisicon is only displayed while receiving.Bluetooth Not ConnectedThe Bluetooth feature is enabled butthere is no remote Bluetooth device con-nected.Bluetooth ConnectedThe Bluetooth feature is enabled. Theicon stays lit when a remote Bluetoothdevice is connected.Notification List has items to review.Option BoardThe Option Board is enabled. (Optionboard enabled models only)Option Board Non-FunctionThe Option Board is disabled.ScanScan feature is enabled.EmergencyRadio is in Emergency mode.SecureThe Privacy feature is enabled.UnsecureThe Privacy feature is disabled.Site RoamingThe site roaming feature is enabled.Additional Radio Controls in Connect Plus Mode177English
BatteryThe number of bars (0 – 4) shown indi-cates the charge remaining in the bat-tery. Blinks when the battery is low.Battery Charging StatusShows battery discharging status.All Tones DisabledNo ring tones available.Call LogRadio call log.ContactRadio contact is available.MessageIncoming message.Silent RingSilent ring mode is enabled.Ring OnlyRinging mode is enabled.VibrateVibrate mode is enabled.Vibrate and RingVibrate and Ring mode is enabled.Wi-Fi Excellent[6]Wi-Fi signal is excellent.Wi-Fi Good[6]Wi-Fi signal is good.Wi-Fi Average[6]Wi-Fi signal is average.Wi-Fi Poor[6]Wi-Fi signal is poor.Additional Radio Controls in Connect Plus Mode178English
Wi-Fi Unavailable[6]Wi-Fi signal is unavailable.Wi-Fi Excellent Highlighted[6]Wi-Fi signal is excellent. When youscroll to a network in the network list, theWi-Fi icon of that network is highlighted.Wi-Fi Good Highlighted[6]Wi-Fi signal is good. When you scroll toa network in the network list, the Wi-Fiicon of that network is highlighted.Wi-Fi Average Highlighted[6]Wi-Fi signal is average. When you scrollto a network in the network list, the Wi-Fiicon of that network is highlighted.Wi-Fi Poor Highlighted[6]Wi-Fi signal is poor. When you scroll toa network in the network list, the Wi-Fiicon of that network is highlighted.Wi-Fi Unavailable Highlighted[6]Wi-Fi signal is unavailable. When youscroll to a network in the network list, theWi-Fi icon of that network is highlighted.Call IconsThe following icons appear on the radio’s displayduring a call. These icons also appear in the Contactslist to indicate ID type.Private CallIndicates a Private Call in progress.Group Call/Site All CallIndicates a Group Call or Site All Callin progress.6Only applicable for SL7550e/SL7590e/SL7580eAdditional Radio Controls in Connect Plus Mode179English
Phone Call as Private CallIndicates a Phone Call as Private Callin progress.Dispatch CallThe Dispatch Call contact type is usedto send a text message to a dispatch-er PC through a third-party Text Mes-sage Server.Sent Item IconsThe following icons appear at the top right corner ofthe radio’s display in the Sent Items folder.ORSent SuccessfullyThe text message is sent successfully.ORIndividual or Group Message ReadThe text message has been read.ORIndividual or Group Message UnreadThe text message has not been read.ORSend FailedThe text message has not been sent.LED IndicatorThe LED indicator ( ) shows the operational status ofyour radio.AAdditional Radio Controls in Connect Plus Mode180English
Blinking red Radio is transmitting at low batterycondition, receiving an emergencytransmission or has failed the self-test upon powering up.Rapidlyblinking redRadio is receiving over-the-air filetransfer (Option Board firmware file,Network Frequency file or OptionBoard Codeplug file) or upgrading toa new Option Board firmware file.Blinkinggreen andyellowRadio is receiving a Call Alert, re-ceived a text message or Scan is en-abled and is receiving activity.Solid yellow Radio is in Bluetooth DiscoverableMode. Also indicates fair batterycharge when programmable buttonis pressed.Doubleblinking yel-lowRadio is actively searching for a newsite.Blinking yel-lowRadio is receiving a Call Alert orScan is enabled and is idle (radio willremain muted to any activity).Solid green Radio is powering up or transmitting.Also indicates full charge of the bat-tery when the programmable buttonis pressed.BlinkinggreenRadio is powering up, receiving anon-privacy- enabled call or data.RapidlyblinkinggreenRadio is receiving a privacy-enabledcall.Indicator TonesHigh pitched tone Low pitched tonePositive Indicator ToneNegative Indicator ToneAlert TonesAlert tones provide you with audible indications of thestatus, or response to data received on the radio.Additional Radio Controls in Connect Plus Mode181English
Continuous Tone A monotone sound.Sounds continuously un-til termination.Periodic Tone Sounds periodically de-pending on the durationset by the radio. Tonestarts, stops, and repeatsitself.Repetitive Tone A single tone that re-peats itself until it is ter-minated by the user.Momentary Tone Sounds only once for ashort period of time de-fined by the radio.Switching Between Connect Plus and Non-Connect Plus ModesTo switch to a non-Connect Plus mode, you mustchange to another zone, if programmed by yourdealer or system administrator. Check with yourdealer or system administrator to see if your radio hasbeen programmed with non-Connect Plus zones, andwhat features are available while operating in non-Connect Plus zones.Additional Radio Controls in Connect Plus Mode182English
Making and Receiving Calls in ConnectPlus ModeSelecting a SiteA site provides coverage for a specific area. AConnect Plus site has a site controller and amaximum of 15 repeaters. In a multi-site network, theConnect Plus radio will automatically search for a newsite when the signal level from the current site dropsto an unacceptable level.Roam RequestA Roam Request tells the radio to search for adifferent site, even if the signal from the current site isacceptable.If there are no sites available,•The radio display shows Searching andcontinues to search through the list of sites.• The radio will return to the previous site, if theprevious site is still available.Note:This is programmed by your dealer.Press the programmed Roam Request button.You hear a tone, indicating the radio has switchedto a new site. The display shows Site ID <SiteNumber>.Site Lock On/OffWhen toggled on, the radio searches the current siteonly. When toggled off, the radio searches other sitesin addition to the current site.Press the programmed Site Lock button.• You hear a positive indicator tone, indicatingthe radio has locked to the current site. Thedisplay shows Site Locked.• You hear a negative indicator tone, indicatingthe radio is unlocked. The display shows SiteUnlocked.Site RestrictionYour Connect Plus radio system administrator has theability to decide which network sites your radio is andis not allowed to use. Your radio does not need to bereprogrammed to change the list of allowed anddisallowed sites. If your radio attempts to register at adisallowed site, you see a brief message stating:Making and Receiving Calls in Connect Plus Mode183English
Site <number given> Not Allowed. The radiothen searches for a different network site.Selecting a ZoneThe radio can be programmed with a maximum of 16Connect Plus Zones and each Connect Plus zonecontains a maximum of 16 assignable positions.Each assignable position can be used to start one ofthe following voice call types:• Group Call• Multigroup Call• Site All Call• Private Call1Access the Zone feature by performing one of thefollowing actions:Radio Con-trolsStepsProgrammedZone buttonPress the programmed Zonebutton.Radio menu 1 to access the menu.Radio Con-trolsSteps2 or to Zone andpress to select.The current zone is displayed and indicated by a.2Select the required zone.Radio Control Steps or or and scroll to the re-quired zone.3Press to select.The display shows <Zone> Selectedmomentarily and returns to the selected zonescreen.Using Multiple NetworksIf your radio has been programmed to use multipleConnect Plus networks, you can select a differentnetwork by switching to the Connect Plus zone that isMaking and Receiving Calls in Connect Plus Mode184English
assigned to the desired network. These network-to-zone assignments are configured by your dealerthrough radio programming.Selecting a Call TypeUse the 4–Way Navigation Disc to select a call type.This can be a Group Call, Multi-group Call, Site AllCall or Private Call, depending on how your radio isprogrammed. If you navigate with the 4–WayNavigation Disc to a different Call Type this causesthe radio to re-register with the Connect Plus site.The radio registers with the Registration Group IDthat has been programmed for the new call type.If you select a position that has no call type assignedto it, your radio sounds a continuous tone and thedisplay shows Unprogrammed. Your radio does notoperate when selected to an unprogrammed channel,use the 4–Way Navigation Disc to select aprogrammed channel instead.Once the required zone is displayed (if you havemultiple zones in your radio), use the 4–WayNavigation Disc to select the call type.Receiving and Responding to a Radio CallOnce the channel, subscriber ID or call type isdisplayed, you can proceed to receive and respond tocalls.The LED lights up solid green while the radio istransmitting and blinks green when the radio isreceiving.Note:The LED lights up solid green while the radiois transmitting and blinks green rapidly whenthe radio is receiving a privacy-enabled call.To unscramble a privacy-enabled call, yourradio must have the same Privacy Key, ORthe same Key Value and Key ID (programmedby your dealer), as the transmitting radio (theradio you are receiving the call from).Note:See Privacy on page 237 for moreinformation.Making and Receiving Calls in Connect Plus Mode185English
Receiving and Responding to a Group CallTo receive a call from a group of users, your radiomust be configured as part of that group.When you receive a Group Call (while on the Homescreen), the LED blinks green.The first line of thedisplay shows the RSSI icon. The second linedisplays the Group Call icon. The third line displaysthe Group Alias. The fourth line shows the CallerAlias. Your radio unmutes and the incoming callsounds through the radio's speaker.1Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.The LED lights up solid green.2Wait for one of the Talk Permit Tone to finish (ifenabled), and speak clearly into the microphone.3Release the PTT button to listen.If there is no voice activity for a predeterminedperiod of time, the call ends.Note:See Making a Group Call on page 189 fordetails on making a Group Call.If the radio receives a Group Call while not onthe Home screen, it remains on its currentscreen prior to answering the call.Long press the button to go to theHome screen to view the caller alias beforereplying.Receiving and Responding to a Private CallA Private Call is a call from an individual radio toanother individual radio.When you receive a Private Call, the LED blinksgreen. The first line of the display shows the RSSIicon. The second line displays the Private Callicon.The third line shows the Caller Alias. Your radiounmutes and the incoming call sounds through thespeaker of the radio.1Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.2Press the PTT button to respond to the call.The LED lights up solid green.3Wait for the Talk Permit Tone to finish (if enabled),and speak clearly into the microphone.Making and Receiving Calls in Connect Plus Mode186English
4Release the PTT button to listen.If there is no voice activity for a predetermined periodof time, the call ends.The display shows Call Ended.See Making a Private Call on page 190 for details onmaking a Private Call.Receiving a Site All CallA Site All Call is a call from an individual radio toevery radio on the site. It is used to make importantannouncements requiring the user’s full attention.When you receive an Site All Call, a tone sounds andthe LED blinks green.The first line of the display shows the RSSI icon. Thesecond line displays the Site All Call icon.The thirdline displays Site All Call. The fourth line displaysthe Caller Alias. Your radio unmutes and theincoming call sounds through the radio speaker.Once the Site All Call ends, the radio returns to theprevious screen before receiving the call. A Site AllCall does not wait for a predetermined period of timebefore ending.You cannot respond to an Site All Call.Note:See Making a Site All Call on page 191 fordetails on making a Site All Call.Note:The radio stops receiving the Site All Call ifyou switch to a different channel whilereceiving the call. During a Site All Call, youwill not be able to use any programmed buttonfunctions until the call ends.Receiving an Inbound Private Phone CallWhen you receive an Inbound Private Phone Call, thePhone Call as Private Call icon appears in the topright corner. The first text line shows Phone Call.1Press and hold the PTT button to answer and talk.Release the PTT button to listen.2Long press to end the call.The first line of the display shows Ending. Thesecond line of the display shows Phone Call....The display returns to the Phone Call screen.The display shows Phone Call Ended.Making and Receiving Calls in Connect Plus Mode187English
Making a Buffered Over-Dial in an Inbound PhonePrivate CallDuring the call, the Phone Call as Private Call iconappears in the top right corner. The first text line ofthe display shows Phone Call.1Use the keypad to enter the digits and press the button.Press followed by within 2 seconds toinsert a pause. The P replaces * and # on thedisplay.The Phone Call as Private Call icon appears in thetop right corner. The first text line of the displayshows the entered digits.2Long press to end the call.The first line of the display shows Ending. Thesecond line of the display shows Phone Call....The display returns to the Phone Call screen.The display shows Phone Call Ended.Making a Live Over-Dial in an Inbound PhonePrivate CallDuring the call, the Phone Call as Private Call iconappears in the top right corner. The first text line ofthe display shows Phone Call.1Press the PTT button and use the keypad to enterthe digits.The Phone Call as Private Call icon appears in thetop right corner. The first text line of the displayshows the Live Dial digits.2Long press to end the call.The first line of the display shows Ending. Thesecond line of the display shows Phone Call....The display returns to the Phone Call screen.The display shows Phone Call Ended.Receiving an Inbound Phone Talkgroup CallWhen you receive an Inbound Phone Talkgroup Call,the Group Call icon appears in the top right corner.The first text line shows Call1.Making and Receiving Calls in Connect Plus Mode188English
Press the PTT button to talk and release it tolisten.Inbound Phone Multi-Group CallWhen you receive an Inbound Phone Multi-GroupCall, the Group Call icon appears in the top rightcorner. The first text line shows Multigroup Call.The radio unmutes and the incoming multi-group callsounds through the radio's speaker.Making a Radio CallAfter selecting your channel, you can select asubscriber alias or ID, or group alias or ID by using:• The PTT button.• A programmed One Touch Access button – TheOne Touch Access feature allows you to make aPrivate Call to a predefined ID easily. This featurecan be assigned to a short or long programmablebutton press. You can ONLY have one IDassigned to a One Touch Access button. Yourradio can have multiple One Touch Accessbuttons programmed.• The Contacts list (see Contacts Settings on page207).Note:Your radio must have the Privacy featureenabled on the channel to send a privacy-enabled transmission. Only target radios withthe same Key Value and Key ID as your radiowill be able to unscramble the transmission.Note:See Privacy on page 237 for moreinformation.Making a CallMaking a Group CallTo make a call to a group of users, your radio mustbe configured as part of that group.1Select the channel with the active group alias orID. See Selecting a Call Type on page 185.2Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.3Press the PTT button to make the call.The LED lights up solid green. The Group Callicon appears in the top right corner. The first textline shows the group call alias.Making and Receiving Calls in Connect Plus Mode189English
4Wait for the Talk Permit Tone to finish (if enabled),and speak clearly into the microphone.5Release the PTT button to listen.When the target radio responds, the LED blinksgreen, the radio unmutes and the responsesounds through the radio’s speaker. You see theGroup Call icon, the group alias or ID, andtransmitting radio alias or ID on your display.If there is no voice activity for a predeterminedperiod of time, the call ends. Radio returns to thescreen you were on prior to initiating the call.Making a Private CallWhile you can receive and/or respond to a PrivateCall initiated by an authorized individual radio, yourradio must be programmed for you to initiate a PrivateCall.You will hear a negative indicator tone, when youmake a Private Call via the Contacts list, Call Log,One Touch Access button, if this feature is notenabled.Use the Text Message or Call Alert features tocontact an individual radio. See Text MessageFeatures on page 222 or Call Alert Operation onpage 93 for more information.1Do one of the following.• Select the channel with the active subscriberalias or ID. See Selecting a Call Type on page185.• Press the programmed One Touch Accessbutton.2Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.3Press the PTT button to make the call.If you release the PTT button while the radio issetting up the call, it exits without any indicationand returns to the previous screen.The LED lights up solid green, the radio unmutesand the response sounds through the radio’sspeaker. The Private Call icon appears on the topright corner. The first text line shows the targetsubscriber alias. The second text line displays thecall status.4Wait for the Talk Permit Tone to finish (if enabled),and speak clearly into the microphone.Making and Receiving Calls in Connect Plus Mode190English
5Release the PTT button to listen.When the target radio responds, the LED blinksgreen, the radio unmutes and the responsesounds through the radio's speaker.If there is no voice activity for a predeterminedperiod of time, the call ends. You hear a shorttone. The display shows Call Ended.Your radio may be programmed to perform a radiopresence check prior to setting up the Private Call. Ifthe target radio is not available, you hear a short toneand see negative mini notice on the display.Making a Site All CallThis feature allows you to transmit to all users on thesite that are currently not engaged in another call.Your radio must be programmed to allow you to usethis feature.Users on the channel/site cannot respond to an SiteAll Call.1Select the channel with the active Site All Callgroup alias. See Selecting a Call Type on page185.2Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.3Press the PTT button to make the call.The LED lights up solid green. The Group Callicon appears in the top right corner. The first textline shows Site All Call.4Wait for the Talk Permit Tone to finish (if enabled),and speak clearly into the microphone.Making a Multi-group CallThis feature allows you to transmit to all users onmultiple groups. Your radio must be programmed toallow you to use this feature.Note:Users on the groups cannot respond to aMulti-group Call.1Select the channel with the active Multi-group aliasor ID. See Selecting a Channel on page 47.2Press the PTT button to make the call.The LED lights up solid green. The display showsthe Multi-group alias or ID.Making and Receiving Calls in Connect Plus Mode191English
Wait for the Talk Permit Tone to finish (if enabled)and speak clearly into the microphone.Making a Private Call with a One Touch Call ButtonNote:Programmable buttons press must be initiatedfrom the Home screen.The One Touch Call feature allows you to easilymake a Private Call to a pre-defined Private Call aliasor ID. This feature can be assigned to a short or longprogrammable button press.You can ONLY have one alias or ID assigned to aOne Touch Call button. Your radio can have multipleOne Touch Call buttons programmed.1Press the programmed One Touch Call button tomake a Private Call to the pre-defined Private Callalias or ID.2Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.3Press the PTT button to make the call.The LED lights up solid green.The display shows the Private Call alias or ID.4Wait for the Talk Permit Tone to finish (if enabled)and speak clearly into the microphone.5Release the PTT button to listen.When the target radio responds, the LED blinksgreen.If there is no voice activity for a predeterminedperiod of time, the call ends.Making a Call with the Programmable Manual DialButtonMaking a Private Call1Press the programmed Manual Dial button toenter into the Manual Dial screen.The display shows Number:.2Use the keypad to enter a subscriber alias orPrivate ID.3Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.4Press the PTT button to make the call.Making and Receiving Calls in Connect Plus Mode192English
The LED lights up solid green. The Private Callicon appears in the top right corner. The first textline shows the subscriber alias. The second textline displays the call status.5Wait for the Talk Permit Tone to finish (if enabled)and speak clearly into the microphone.6Release the PTT button to listen.When the target radio responds, the LED blinksgreen.If there is no voice activity for a predeterminedperiod of time, the call ends. You hear a shorttone. The display shows Call Ended.Making an Outbound Private Phone Call with theProgrammable Manual Dial Button1Press the programmed Manual Dial button toenter into the Manual Dial screen.The display shows Number:.2Use the keypad to enter a telephone number, andpress to place a call to the entered number.Press to delete any unwanted characters. Press followed by within 2 seconds to inserta pause. The P replaces * and # on the display.If successful, the first line of the display showsPhone Call. The second line of the display showsthe dialed telephone number.If an invalid telephone number is selected, thedisplay shows a negative mini notice, Phone CallFailed, Resource Not Available, or InvalidPermissions.If is pressed with no telephone numberentered, the radio sounds a positive indicator tonethen a negative indicator tone. The displayremains the same.3Long press to end the call.The first line of the display shows Ending. Thesecond line of the display shows Phone Call....The display shows Phone Call Ended.Making and Receiving Calls in Connect Plus Mode193English
Making an Outbound Private Phone Call via the PhoneMenu1 to access the menu.2 or to Phone and press to select.3Press to select Manual Dial.The first line of the display shows Number, thesecond line of the display shows a blinking cursor.4Use the keypad to enter a telephone number, andpress to place a call to the entered number.Press to delete any unwanted characters. Press followed by within 2 seconds to inserta pause. The P replaces * and # on the display.If successful, the first line of the display showsPhone Call. The second line of the display showsthe dialed telephone number.If an invalid telephone number is selected, thedisplay shows a negative mini notice, Phone CallFailed, Resource Not Available, or InvalidPermissions.If is pressed with no telephone numberentered, the radio sounds a positive indicator tonethen a negative indicator tone. The displayremains the same.5Long press to end the call.The first line of the display shows Ending. Thesecond line of the display shows Phone Call....The display shows Phone Call Ended.Making an Outbound Private Phone Call from ContactsNote:If the Phone Manual Dial is disabled inMOTOTRBO Connect Plus Option BoardCPS, the Phone Number item will not bedisplayed in the Menu.1 to access the menu.2 or to Contacts and press to select.Making and Receiving Calls in Connect Plus Mode194English
3 or to Manual Dial and press toselect.4 or to Phone Number and press toselect.The first line of the display shows Number, thesecond line of the display shows a blinking cursor.5Use the keypad to enter a telephone number, andpress to place a call to the entered number.If the PTT button is pressed, the display shows anegative mini notice, Press OK to Send andreturns to the previous screen.Press to delete any unwanted characters. Press followed by within 2 seconds to inserta pause. The P replaces * and # on the display.If successful, the first line of the display showsPhone Call. The second line of the display showsthe dialed telephone number.If is pressed with no telephone numberentered, the radio sounds a positive indicator tonethen a negative indicator tone. The displayremains the same.6Long press to end the call.The first line of the display shows Ending. Thesecond line of the display shows Phone Call....The display shows Phone Call Ended.Waiting for the Channel Grant in an Outbound PrivatePhone CallWhen you make a Private Phone Call, the first line ofthe display shows Phone Call. The second line ofthe display shows the dialed telephone number.When the call is connected, the Phone Call as PrivateCall icon appears in the top right corner. The first lineof the display shows the telephone number.If unsuccessful, the display shows a negative mininotice, Phone Call Failed, Resource NotAvailable, or Invalid Permissions.Long press to end the call.The display returns to the previous screen.Making and Receiving Calls in Connect Plus Mode195English
Making a Buffered Over-Dial in a Connected OutboundPrivate Phone CallDuring the call, the Phone Call as Private Call iconappears in the top right corner. The first text line ofthe display shows the telephone number.1Use the keypad to enter the digits.Press to delete any unwanted characters. Press followed by within 2 seconds to inserta pause. The P replaces * and # on the display.The first text line of the display shows ExtraDigits, the second text line of the display showsthe entered extra digits.2Press the button.If the PTT button is pressed, the display shows anegative mini notice, Press OK to Send andreturns to the previous screen.The Phone Call as Private Call icon appears in thetop right corner. The first text line of the displayshows the telephone number with the over-dialdigits appended.3Do one of the following.•Press to return to the Phone Call screen.•Long press to end the call.Making a Live Over-Dial in a Connected OutboundPrivate Phone CallDuring the call, the Phone Call as Private Call iconappears in the top right corner. The first text line ofthe display shows the telephone number.1Press the PTT button and use the keypad to enterthe digits.The Phone Call as Private Call icon appears in thetop right corner. The first text line of the displayshows the telephone number with the over-dialdigits appended.2Long press to end the call.The first line of the display shows Ending. Thesecond line of the display shows Phone Call....The display shows Phone Call Ended.Making and Receiving Calls in Connect Plus Mode196English
Advanced Features in Connect PlusModeAuto FallbackAuto Fallback is a system feature that allows you tocontinue to make and receive non-emergency callson the selected Group Contact in the event of certaintypes of Connect Plus system failures.If one of these failures occurs, your radio attempts toroam to a different Connect Plus site. This searchprocess may result in your radio finding an operableConnect Plus site, or it may result in your radio findinga “Fallback Channel” (if your radio is enabled for AutoFallback). A Fallback Channel is a repeater that isnormally part of an operable Connect Plus site, but iscurrently unable to communicate with either its sitecontroller or the Connect Plus network. In Fallbackmode, the repeater operates as a single digitalrepeater. Auto Fallback Mode supports non-emergency Group Calls only. No other call types aresupported in Fallback Mode.Indications of Auto Fallback ModeWhen your radio is using a Fallback channel, youhear the intermittent “Fallback Tone” approximatelyonce every 15 seconds (except while transmitting).The display periodically shows a brief message,“Fallback Channel”. Your radio only permits PTT onthe selected Group Contact (Group Call, MultigroupCall, or Site All Call). It does not allow you to makeother types of calls.Making/Receiving Calls in Fallback ModeNote:Calls are heard only by radios that aremonitoring the same Fallback channel andselected to the same Group. Calls are notnetworked to other sites or other repeaters.Emergency voice calls or Emergency Alertsare not available in Fallback mode. If youpress the emergency button in Fallback mode,the radio provides an invalid key press tone.Display-equipped radios also show themessage, “Feature not available”.Private (radio to radio) and Phone calls are notavailable in Fallback mode. If you attempt aAdvanced Features in Connect Plus Mode197English
call to a private contact, you will receive adenial tone. At this point you should select adesired group contact. Other non-supportedcalls include Remote Monitor, Call Alert, RadioCheck, Radio Enable, Radio Disable, Textmessaging, Location Updates, and packetdata calls.Enhanced Traffic Channel Access (ETCA) isnot supported in Auto Fallback mode. If two ormore radio users press PTT at the same time(or at almost the same time), it is possible thatboth radios transmit until PTT is released. Inthis event, it is possible that none of thetransmissions will be understood by receivingradios.Making calls in Fallback mode is similar to normalfunctioning. Simply select the group contact you wishto use (using the radio’s normal channel selectionmethod), and then press the PTT to start your call. Itis possible that the channel may be in use already byanother group. If the channel is in use, you receive abusy tone and the display will say “Channel Busy”.You may select Group, Multi-group or Site All Callcontacts using your radio’s normal channel selectionmethod. While the radio is operating on the FallbackChannel, the Multigroup operates just like otherGroups. It is only heard by radios that are currentlyselected to the same Multi-group.Returning to Normal OperationIf the site returns to normal trunking operation whileyou are in range of your Fallback repeater, your radioautomatically exits Auto Fallback mode. You hear aregistration “beep” when the radio successfullyregisters. If you are in the range of an operable site(that is not in Fallback mode), you may press theRoam Request button (if programmed for your radio)to force your radio to search for and register on anavailable site. If no other site is available, your radioreturns to Auto Fallback mode after searching iscomplete. If you drive out of coverage of yourFallback repeater, your radio enters Search mode(display indicates “Searching”).Radio CheckIf enabled, this feature allows you to determine ifanother radio is active in a system without disturbingthe user of that radio. No audible or visual notificationis shown on the target radio.Sending a Radio Check1Access the Radio Check feature.Advanced Features in Connect Plus Mode198English
RadioControlStepsProgram-med Ra-dio Checkbutton1Press the programmed RadioCheck button.2 or to the required sub-scriber alias or ID and press to select.Menu 1 to access the menu.2 or to Contacts and press to select.3 or to the required sub-scriber alias or ID and press to select.4 or to Radio Check andpress to select.The display shows the Target Alias, indicating therequest is in progress. The LED lights up solidgreen.2Wait for acknowledgement.If the target radio is active in the system, a tonesounds and the display briefly shows TargetRadio Available.If the target radio is not active in the system, atone sounds and the display briefly shows TargetRadio Not Available.Radio returns to the subscriber alias or ID screenwhen initiated via Menu.Radio returns to the Home Screen if initiated viathe programmable button.Remote MonitorUse the Remote Monitor feature to turn on themicrophone of a target radio (subscriber alias or IDsonly). The green LED will blink once on the targetsubscriber. You can use this feature to monitor,remotely, any audible activity surrounding the targetradio.Your radio must be programmed to allow you to usethis feature.Advanced Features in Connect Plus Mode199English
Initiating Remote MonitorNote:Remote Monitor automatically stops after aprogrammed duration or when there is anyattempt to initiate transmission, changechannels or power down the radio.1Access the Remote Monitor feature.RadioControlStepsProgram-med Re-moteMonitorButton1Press the programmed RemoteMonitor button.2 or to the required sub-scriber alias or ID and press toselect.Menu 1 to access the menu.2 or to Contacts and press to select.RadioControlSteps3 or to the required sub-scriber alias or ID and press toselect.4 or to Manual Dial andpress to select.5 or to Remote Mon. andpress to select.The first text line shows Rem. Monitor. Thesecond text line displays the Target Alias,indicating the request is in progress. The LEDlights up blinking green.2Wait for acknowledgement.If successful, a positive indicator tone sounds andthe display momentarily shows Rem. MonitorSuccessful. Your radio starts playing audio fromthe monitored radio for a programmed durationand display shows Rem. Monitor, followed byAdvanced Features in Connect Plus Mode200English
target alias. Once the timer expires, the radiosounds an alert tone and the LED turns off.If unsuccessful, the radio sounds a negativeindicator tone the display shows Rem. MonitorFailed.ScanThis feature allows your radio to monitor and join callsfor groups defined in a pre-programmed scan list.When scan is enabled, the scan icon appears on thestatus bar and the LED blinks yellow when idle.Starting and Stopping ScanNote:This procedure turns the Scan feature On orOff for all Connect Plus zones with the sameNetwork ID as your currently selected zone. Itis important to note that even when the Scanfeature is turned on via this procedure, scanmay still be disabled for some (or all) groupson your scan list. See Editing the Scan List onpage 203 for more information.You can start and stop scanning by pressing theprogrammed Scan button OR follow the proceduredescribed next.1 to access the menu.2 or to Scan and press to select.3 or to Turn On or Turn Off and press to select.•The display shows Scan On if scan is enabled.•The Scan menu shows Turn Off if scan isenabled.•The display shows Scan Off if scan isdisabled.•The Scan menu shows Turn On if scan isdisabled.Responding to a Transmission During a ScanDuring scanning, your radio stops on a group whereactivity is detected. The radio continuously listens forany member in the scan list when idle on the controlchannel.Advanced Features in Connect Plus Mode201English
1Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.2Press the PTT button during hang time.The LED lights up solid green.3Wait for the Talk Permit Tone to finish (if enabled),and speak clearly into the microphone.4Release the PTT button to listen.If you do not respond within the hang time, theradio returns to scanning other groups.User Configurable ScanIf the Edit List menu is enabled, a user is able to Addand Remove the scan members from the AddMember menu. A Scan List member must be aregular Group Contact (i.e. not Multi-group or Site AllCall/Network Wide All Call) that is currently assignedto a Channel Selector position in a Connect PlusZone with the same Network ID as the currentlyselected Zone. The Talkgroup alias must not matchany Talkgroup that has been included in the currentZone's Scan List.Scan can be turned on or off from the menu or bypressing a programmed Scan On/Off button.This feature functions only when the radio is notcurrently involved in a call. If you are presentlylistening to a call, your radio cannot scan for othergroup calls, and is therefore unaware they are inprogress. Once your call is finished, your radioreturns to the control channel time slot and is able toscan for groups that are in the scan list.Turning Scan On or OffNote:This procedure turns the Scan feature On orOff for all zones with the same Network ID asyour currently selected zone. It is important tonote that even when the Scan feature isturned on via this procedure, scan may still bedisabled for some (or all) groups on your scanlist. See the next section for more information.If Scan is turned on, the Scan icon appears on yourdisplay. When Scan is on and you are notparticipating in a call, the LED blinks green andyellow.Advanced Features in Connect Plus Mode202English
The procedure for turning Scan on or off depends onhow your radio is programmed. If programmed with aScan On/Off button, use the button to toggle thefeature on or off. If your radio has been programmedso that Scan can be turned on or off via the menu,follow the procedure described next.1 to access the menu.2 or to Scan and press to select.3 or to Turn On or Turn Off and press to select.•The display shows Scan On momentarily ifscan is disabled.•The display shows Scan Off momentarily ifscan is enabled.Editing the Scan ListNote:If the scan list entry happens to be the radio’scurrently selected group, the radio listens foractivity on this group regardless of whether thelist entry currently shows a check mark or not.Whenever a radio is not in a call, the radiolistens for activity on its Selected Group,Multigroup, the Site All Call, and its DefaultEmergency Revert Group (if configured forone). This operation cannot be disabled. IfScan is enabled the radio will also listen foractivity on enabled Zone Scan List members.Your scan list determines which groups can bescanned. The list is created when your radio isprogrammed. If your radio has been programmed toallow you to edit the scan list, you can,• Enable/disable scan for individual groups on thelist.•Add and Remove the scan members from the AddMember menu. Refer to Add or Delete a Group viathe Add Members Menu on page 204.Note:A Scan List member must be a regular GroupContact (i.e. not Multigroup or Site All Call/Network Wide All Call) that is currentlyassigned to a Channel Selector position in aConnect Plus Zone with the same Network IDas the currently selected Zone.Advanced Features in Connect Plus Mode203English
The Talkgroup alias must not match anyTalkgroup that has been included in thecurrent Zone's Scan List.1 to access the menu.2 or to View/Edit List and press toselect.3 or to the desired Group name.If a check mark precedes the Group name, thenscan is currently enabled for this Group.If there is no check mark preceding the Groupname, then scan is currently disabled for thisGroup.4 to select the desired Group.The display shows Enable if scan is currentlydisabled for the Group.The display shows Disable if scan is currentlyenabled for the Group.5Select the displayed option (Enable or Disable)and press to select.Depending on which option was selected, theradio momentarily displays Scan Enabled or ScanDisabled as confirmation.The radio displays the Zone scan list again. If scanwas enabled for the Group, the check mark displaysbefore the Group name. If scan was disabled for theGroup, the check mark is removed before the Groupname.Add or Delete a Group via the Add MembersMenuThe Connect Plus radio does not allow a duplicategroup number or a duplicate group alias to be placedon a zone scan list (or to be shown as a “scancandidate”). Thus, the list of “scan candidates”described in steps 6 and 7 sometimes changes afteradding or deleting a group from the zone scan list.If your radio has been programmed to allow you toedit the scan list, you can use the Add Membersmenu to add a group to the scan list of the currentlyAdvanced Features in Connect Plus Mode204English
selected zone, or to delete a group from the san list ofthe currently selected zone.1 to access the menu.2 or to Scan option and press to select.3 or to <Add Members> and press toselect.The display shows “Add Members from Zone n” (n= the Connect Plus zone number of the firstConnect Plus zone in your radio with the sameNetwork ID as your currently selected zone).4Do one of the following.• If the group you want to add to the scan list isassigned to a channel selector position in thatzone, go to step 6.• If the group you want to add to the scan list isassigned to a channel selector position in adifferent Connect Plus zone, go to step 5.5 or to scroll a list of Connect Plus zonesthat have the same Network ID as the currentlyselected zone.6After locating the Connect Plus zone where thedesired group is assigned to a channel selectorposition, press to select.Your radio displays the first entry in a list of groupsassigned to a channel position in that zone. Thegroups on the list are called “scan candidates”,because they can be added to the scan list of yourcurrently selected zone (or they are already on thezone scan list).If the zone does not have any groups that can beadded to the scan list, the radio displays NoCandidates.7 or to scroll through the list of candidategroups.If a plus sign (+) is displayed immediately beforethe group alias, this indicates the group iscurrently on the scan list for the selected zone.Advanced Features in Connect Plus Mode205English
If the plus sign (+) is not displayed immediatelybefore the alias, the group is not currently on thescan list, but can be added.8Press when the desired group alias isdisplayed.If this group is not currently on the scan list for thecurrently selected zone, the Add (Group Alias)message is displayed.If this group is already on the scan list for thecurrently selected zone, the Delete (Group Alias)message is displayed.9Press to accept the displayed message (Addor Delete).If deleting a group from the list, you will know theoperation is successful because the plus sign (+)will no longer display immediately before the alias.If adding a group to the list, you will know theoperation is successful because the plus sign (+)will display before the alias.If you are attempting to add a group, and the list isalready full, the radio displays List Full. If thisshould occur, it will be necessary to delete a groupfrom the scan list prior to adding a new one.10 When finished, press as many times asnecessary to return to the desired menu.Understanding Scan OperationNote:If the Radio joins a call for a Zone Scan Listmember from a different Zone and Call HangTimer expires before you are able to respond,in order to respond, you must navigate to theZone and Channel of the Scan List Memberand start a new call.There are some circumstances in which you can misscalls for groups that are in your scan list. When youmiss a call for one of the following reasons, this doesnot indicate a problem with your radio. This is anormal scan operation for Connect Plus.• Scan feature is not turned on (check for the scanicon on the display).• Scan list member has been disabled via the menu(see Editing the Scan List on page 203).• You are participating in a call already.Advanced Features in Connect Plus Mode206English
• No member of the scanned group is registered atyour site (Multisite systems only).Scan TalkbackIf your radio scans into a call from the selectablegroup scan list, and if the PTT button is pressedduring the scanned call, the operation of the radiodepends on whether Scan Talkback was enabled ordisabled during radio programming. For moreinformation on how your radio is programmed,contact your radio dealer (or your radio systemadministrator).ScanTalkbackDisabledThe radio leaves the scanned call andattempts to transmit on the contact forthe currently selected channelposition. After the Call Hang Time onthe currently selected contact expires,the radio returns to the home channeland starts the Scan Hang Time Timer.The radio resumes group scan after itsScan Hang Time Timer expires.ScanTalkbackEnabledIf the PTT button is pressed during theGroup Hang Time of the scanned call,the radio attempts to transmit to thescanned group.Note:If you scan into a call for a group that is notassigned to a channel position in the currentlyselected zone and you miss the Hang Time ofthe call, switch to the proper zone and thenselect the channel position of the group to talkback to that group.Contacts SettingsNote:You can add, or edit subscriber IDs forConnect Plus Contacts. Deleting subscriberIDs can only be performed by your dealer.If the Privacy feature is enabled on a channel,you can make a privacy-enabled voice call onthat channel. Only target radios with the samePrivacy Key, or the same Key Value and KeyID as your radio are able to unscramble thetransmission.Contacts provide “address-book” capabilities on yourradio. Each entry corresponds to an alias or ID thatyou use to initiate a call.Advanced Features in Connect Plus Mode207English
Each zone provides a Contact List with up to 100contacts. The following contact types are available:• Private Call•Group Call• Multigroup Call• Site All Call Voice• Site All Call Text• Dispatch CallThe Dispatch Call contact type is used to send a textmessage to a dispatcher PC through a third-partyText Message Server.Making a Private Call from Contacts1 to access the menu.2 or to Contacts and press to select.The entries are alphabetically sorted.3Use one of the steps described next to select therequired subscriber alias:• Select the subscriber alias directly.• or to the required subscriber alias orID.•Use the Manual Dial menu.• or to Manual Dial and press toselect.• If there was previously dialed ID, the IDappears along with a blinking cursor. Usethe keypad to edit/enter the ID. Press toselect.4Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.5Press the PTT button to make the call.The LED lights up solid green.6Wait for the Talk Permit Tone to finish (if enabled),and speak clearly into the microphone.7Release the PTT button to listen.When the target radio responds, the LED blinksgreen and the display shows the transmittinguser's ID.Advanced Features in Connect Plus Mode208English
If there is no voice activity for a predeterminedperiod of time, the call ends.You hear a short tone. The display shows CallEnded.Making a Call Alias SearchYou can also use alias or alphanumeric search toretrieve the required subscriber alias.This feature is only applicable while in Contacts.1 to access the menu.2 or to Contacts and press to select.The entries are alphabetically sorted.3Key in the first character of the required alias, andthen press or to locate the required alias.4Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.5Press the PTT button to make the call.The LED lights up solid green. The display showsthe destination alias.6Wait for the Talk Permit Tone to finish (if enabled),and speak clearly into the microphone.7Release the PTT button to listen.When the target radio responds, the LED blinksgreen.If there is no voice activity for a predeterminedperiod of time, the call ends.The display shows Call Ended.Adding a New Contact1 to access the menu.2 or to Contacts and press to select.3 or to New Contact and press toselect.4Use the keypad to enter the contact number andpress to confirm.Advanced Features in Connect Plus Mode209English
5Use the keypad to enter the contact name andpress to confirm.6If adding a Radio Contact, or to therequired ringer type and press to select.The radio sounds a positive indicator tone and thedisplay shows Contact Saved.Call Indicator SettingsActivating and Deactivating Call Ringers for Call AlertYou can select, or turn on or off ringing tones for areceived Call Alert.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Tones/Alert and press toselect.5 or to Call Ringers and press toselect.6 or to Call Alert and press to select.The current tone is indicated by a .7 or to the required tone and press toselect. appears beside selected tone.Activating and Deactivating Call Ringers for PrivateCallsYou can turn on or off the ringing tones for a receivedPrivate Call.1 to access the menu.2 or to Utilities and press to select.Advanced Features in Connect Plus Mode210English
3 or to Radio Settings and press toselect.4 or to Tones/Alerts and press toselect.5 or to Call Ringers and press toselect.6 or to Private Call and press toselect.7Press to enable/disable the Private Callringing tones.The display shows beside Enabled, if PrivateCall ringing tones are enabled.The is not displayed when Private Call ringingtones are disabled.Activating and Deactivating Call Ringers for TextMessageYou can turn on or off the ringing tones for a receivedText Message.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Tones/Alerts and press toselect.5 or to Call Ringers and press toselect.6 or to Text Message and press toselect.The current tone is indicated by a .Advanced Features in Connect Plus Mode211English
7 or to the required tone and press toselect. appears beside selected tone.Selecting a Ring Alert TypeNote:The programmed Ring Alert Type button isassigned via CPS. Check with your dealer orsystem administrator to determine how yourradio has been programmed.You can program the radio calls to onepredetermined vibrate call. If All Tones status isdisabled, the radio displays the All Tone Mute icon.If All Tones status is enabled, the related ring alerttype is displayed.The radio sounds one vibration if it is a momentaryring style. The radio vibrates repetitively if it is arepetitive ring style. When set to Ring and Vibrate,the radio sounds a specific ring tone if there is anyincoming radio transaction (for example, Call Alert orMessage). It sounds like a good key tone or missedcall. If the notification list is not empty, the radiorepeats a vibration every 5 minutes.You can select a Ring Alert Type by performing oneof the following actions.•Press the programmed Ring Alert Type button toaccess the Ring Alert Type menu.a) Press or to Ring, Vibrate, Ring &Vibrate or Silent and press to select.•Access this feature via the menu.a) Press to access the menu.b) Press or to Utilities and press to select.c) Press or to Radio Settings andpress to select.d) Press or to Tones/Alerts and press to select.e) Press or to Ring Alert Type andpress to select.f) Press or to Ring, Vibrate, Ring &Vibrate or Silent and press to select.Advanced Features in Connect Plus Mode212English
Configuring Vibrate StyleNote:The programmed Vibrate Style button isassigned via CPS. Check with your dealer orsystem administrator to determine how yourradio has been programmed.You can configure the vibrate style by performing oneof the following actions.•Press the programmed Vibrate Style button toaccess the Vibrate Style menu.a) Press or to Short, Medium, or Longand press to select.•Access this feature via the menu.a) Press to access the menu.b) Press or to Utilities and press to select.c) Press or to Radio Settings andpress to select.d) Press or to Tones/Alerts and press to select.e) Press or to Vibrate Style and press to select.f) Press or to Short, Medium, or Longand press to select.Escalating Alarm Tone VolumeYou can program your radio to continually alert youwhen a radio call remains unanswered. This is doneby automatically increasing the alarm tone volumeover time. This feature is known as Escalert.Call Log FeaturesYour radio keeps track of all recent outgoing,answered, and missed Private Calls. Use the call logfeature to view and manage recent calls.You can perform the following tasks in each of yourcall lists:• Delete•View DetailsViewing Recent CallsThe lists are Missed, Answered, and Outgoing.Advanced Features in Connect Plus Mode213English
1 to access the menu.2 or to Call Log and press to select.3 or to preferred list and press to select.The display shows the most recent entry at the topof the list.4 or to view the list.Press the PTT button to start a Private Call withthe current selected alias or ID.Deleting a Call from a Call List1 to access the menu.2 or to Call Log and press to select.3 or to the required list and press toselect.When you select a call list and it contains noentries, the display shows List Empty, andsounds a low tone if Keypad Tones are turned on(see Turning Keypad Tones On or Off on page144).4 or to the required alias or ID and press to select.5 or to Delete and press to select.6Do one of the following:•Press to select Yes to delete the entry. Thedisplay shows Entry Deleted.• or to No, and press the button toreturn to the previous screen.Viewing Details from a Call List1 to access the menu.2 or to Call Log and press to select.3 or to the required list and press toselect.Advanced Features in Connect Plus Mode214English
4 or to the required alias or ID and press to select.5 or to View Details and press toselect.Display shows details.Call Alert OperationCall Alert paging enables you to alert a specific radiouser to call you back when they are able to do so.This feature is accessible through the menu viaContacts, manual dial or a programmed One TouchAccess button.Receiving and Responding to a Call AlertWhen you receive a Call Alert page, you see thenotification list listing a Call Alert with the alias or ID ofthe calling radio on the display.When you hear a repetitive tone and the LEDblinks yellow, do one of the following:• Press the PTT button while the display stillshows the Call Alert in the Notification List torespond with a Private Call.•Press to exit the Notification List. Thealert is moved to the Missed Call Log.See Notification List on page 249 for details aboutthe Notification List.See Call Log Features on page 213 for detailsabout the Missed Call List.Making a Call Alert from the Contact List1 to access the menu.2 or to Contacts and press to select.3Use one of the steps described next to select therequired subscriber alias or ID:• select the subscriber alias directly• or to the required subscriber aliasand press to select.•use the Manual Dial menuAdvanced Features in Connect Plus Mode215English
• or to Manual Dial and press toselect.• The Manual Dial text entry screen shall bedisplayed. Enter the Subscriber ID andpress .4 or to Call Alert and press to select.The display shows Call Alert: <SubscriberAlias or ID>Call Alert and the subscriberalias or ID, indicating that the Call Alert has beensent.The LED lights up solid green when your radio issending the Call Alert.If the Call Alert acknowledgement is received, thedisplay shows Call Alert Successful.If the Call Alert acknowledgement is not received,the display shows Call Alert Failed.Making a Call Alert with the One Touch Access ButtonPress the programmed One Touch Accessbutton to make a Call Alert to the predefined alias.The display shows Call Alert and thesubscriber alias or ID, indicating that the Call Alerthas been sent.The LED lights up solid green when your radio issending the Call Alert.If the Call Alert acknowledgement is received, thedisplay shows Call Alert Successful.If the Call Alert acknowledgement is not received,the display shows Call Alert Failed.Emergency OperationNote:If your radio is programmed for Silent or Silentwith Voice emergency initiation, in most casesit automatically exits silent operation after theEmergency Call or Emergency Alert isfinished. The exception to this rule is whenEmergency Alert is the configured EmergencyMode and Silent is the configured EmergencyType. If your radio is programmed in thismanner, the silent operation continues untilyou cancel silent operation by pressing PTT orthe button configured for Emergency Off.Advanced Features in Connect Plus Mode216English
Emergency voice calls and Emergency Alertsare not supported when operating in ConnectPlus Auto Fallback mode. For moreinformation see the Auto Fallback on page197.An Emergency Alert is used to indicate a criticalsituation. You can initiate an Emergency at any timeon any screen display, even when there is activity onthe current channel. Pressing the Emergency buttoninitiates the programmed Emergency mode. Theprogrammed Emergency mode may also be initiatedby triggering the optional Man Down feature. TheEmergency feature may be disabled in your radio.Your dealer can set the duration of a button press forthe programmed Emergency button, except for longpress, which is similar with all other buttons:Short press Between 0.05 seconds and 0.75seconds.Long press Between 1.00 second and 3.75seconds.The Emergency button is assigned with theEmergency On/Off feature. Check with your dealer forthe assigned operation of the Emergency button.•If the short press for the Emergency button isassigned to turn on the Emergency mode, then thelong press for the Emergency button is assignedto exit the Emergency mode.• If the long press for the Emergency button isassigned to turn on the Emergency mode, then theshort press for the Emergency button is assignedto exit the Emergency mode.When your radio is selected to a Connect Plus zone,it supports three Emergency modes:EmergencyCallYou must press the PTT button totalk on the assigned emergency timeslot.EmergencyCall withVoice toFollowFor the first transmission on theassigned emergency time slot, themicrophone is automaticallyunmuted and you may talk withoutpressing the PTT button. Themicrophone stays “hot” in thisfashion for a time periodprogrammed into the radio. Forsubsequent transmissions in thesame Emergency call, you mustpress the PTT button.Advanced Features in Connect Plus Mode217English
EmergencyAlertAn Emergency Alert is not a voicecall. It is an emergency notificationthat is sent to radios that areconfigured to receive these alerts.The radio sends an emergency alertvia the control channel of thecurrently registered site. TheEmergency Alert is received byradios in the Connect Plus networkthat are programmed to receivethem (no matter which network sitethey are registered to).Only one of the Emergency Modes can be assignedto the Emergency button per zone. In addition, eachEmergency mode has the following types:Regular Radio initiates an Emergency andshows audio and/or visual indicators.Silent Radio initiates an Emergency withoutany audio or visual indicators. The radiosuppresses all audio or visualindications of the Emergency until youpress the PTT button to start a voicetransmission.SilentwithVoiceThe same as Silent operation, exceptthat the radio also unmutes for somevoice transmissions.Receiving an Incoming EmergencyYour radio may be programmed to sound an alerttone and also display information about the incomingEmergency. If so programmed, upon receiving theincoming Emergency, the display shows theEmergency Details screen with the emergency icon,the Alias or ID of the radio that requested theEmergency, the Group Contact being used for theEmergency, and one additional line of information.The additional information is the name of the zonethat contains the Group Contact.At the present time, the radio displays only the mostrecently decoded Emergency. If a new Emergency isreceived before the prior Emergency is cleared, thedetails for the new Emergency replace the details ofthe previous Emergency.Depending on how your radio has been programmed,the Emergency Details screen (or Alarm List screen)will stay on your radio’s display even after theEmergency ends. You can save the emergencydetails to the Alarm List, or you can delete theAdvanced Features in Connect Plus Mode218English
emergency details as described in the followingsections.Saving the Emergency Details to the Alarm ListSaving the emergency details to the Alarm List allowsyou to view the details again at a later time byselecting Alarm List from the Main Menu.1While the Emergency Details (or Alarm List)screen is displayed, press .The Exit Alarm List screen displays.2Perform one of the following actions:•Select Yes and press to save theemergency details to the Alarm List, and to exitthe Emergency Details (or Alarm List) screen.•Select No and press to return to theEmergency Details (or Alarm List) screen.Deleting the Emergency Details1While the Emergency Details screen is displayed,press .The Delete screen displays.2Perform one of the following actions:•Select Yes and press to delete theemergency details.•Select No and press to return to theEmergency Details screen.Responding to an Emergency CallNote:If you do not respond to the Emergency Callwithin the time allotted for the Emergency CallHang Time, the Emergency call will end. If youwant to speak to the group after theEmergency Call Hang Time expires, you mustfirst select the channel position assigned tothe group (if not already selected). Then,press PTT to start a non-Emergency Call tothe group.1When receiving an Emergency Call, press anybutton to stop all Emergency Call receivedindications.2Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.Advanced Features in Connect Plus Mode219English
3Press the PTT button to initiate a voicetransmission on the Emergency group.All radios that are monitoring this group hear yourtransmission.4Wait for the Talk Permit Tone to finish (if enabled)and speak clearly into the microphone.The LED lights up green.5Release the PTT button to listen.When the emergency initiating radio responds, theLED blinks green, the LED blinks green, the radiounmutes and the response sounds through theradio's speaker. You see the Group Call icon, thegroup ID, and transmitting radio ID on yourdisplay.Responding to an Emergency AlertNote:The Group contact used for the EmergencyAlert should not be used for voicecommunication. This could prevent otherradios from sending and receiving EmergencyAlerts on the same group.An Emergency Alert from a radio indicates that theuser is in an urgent situation. You may respond to thealert by initiating a private call to the radio whodeclared the emergency, initiating a group call to adesignated talk group, sending the radio a Call Alert,initiating a Remote Monitor of that radio, etc. Theproper response is determined by your organizationand the individual situation.Initiating an Emergency CallNote:If your radio is set to Silent, it does not displayany audio or visual indicators duringEmergency mode until you press the PTTbutton to initiate a voice transmission.If your radio is set to Silent with Voice, it doesnot initially display any audio or visualindicators that the radio is in Emergencymode. However, your radio unmutes for thetransmissions of radios responding to youremergency. The emergency indicators onlyappear once you press the PTT button toinitiate a voice transmission from your radio.For both “Silent” and “Silent with Voice”operation, the radio automatically exits silentoperation after the Emergency Call is finished.Advanced Features in Connect Plus Mode220English
1Press the programmed Emergency button.2Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.3Press the PTT button to initiate a voicetransmission on the Emergency group.When you release the PTT button, the Emergencycall continues for the time allotted for theEmergency Call Hang Time.If you press the PTT button during this time, theEmergency call continues.Initiating an Emergency Call with Voice to FollowYour radio must be programmed for this type ofoperation.When enabled for this operation, when you press theprogrammed Emergency button, and when yourradio receives the time slot assignment, themicrophone is automatically activated withoutpressing the PTT button. This activated microphonestate is also known as “hot mic”. The “hot mic” appliesto the first voice transmission from your radio duringthe Emergency call. For subsequent transmissions inthe same Emergency call, you must press the PTTbutton.1Press the programmed Emergency button.2Hold the radio vertically 1 to 2 inches (2.5 to 5.0cm) from your mouth.3The microphone remains active for the “hot mic”time specified in your radio's codeplugprogramming.During this time, the LED lights up green.4Press and hold the PTT button to talk longer thanthe programmed duration.Initiating an Emergency AlertNote:If your radio is programmed for “Silent” or“Silent with Voice”, it will not provide any audioor visual indications that it is sending anEmergency Alert. If programmed for “Silent”,the silent operation continues indefinitely untilyou press PTT or the button configured for“Emergency Off”. If programmed for “Silentwith Voice”, the radio automatically cancelsAdvanced Features in Connect Plus Mode221English
silent operation when the site controllerbroadcasts the Emergency Alert.Press the orange Emergency button.Upon transmitting the Emergency Alert to the sitecontroller, the radio’s display shows theEmergency icon, the Group contact used for theEmergency Alert, and TX Alarm.Once the Emergency Alert is successfully sent and isbeing broadcast for other radios to hear, a positiveindicator tone sounds and the radio’s display showsAlarm Sent. If the Emergency Alert is unsuccessful,a negative indicator tone sounds and the radiodisplays Alarm Failed.Exiting Emergency ModeNote:If the Emergency call ends due to theexpiration of the Emergency Hang Time, butthe emergency condition is not over, press theEmergency button again to restart theprocess.If you initiate an Emergency Alert by pressing theprogrammed Emergency button, your radioautomatically exits Emergency mode after receiving aresponse from the Connect Plus system.If you initiate an Emergency call by pressing theprogrammed Emergency button, your radio will beassigned a channel automatically when one becomesavailable. Once your radio has transmitted amessage indicating the emergency, you cannotcancel your Emergency call. However, if you pressedthe button by accident or the emergency no longerexists, you may wish to say this over the assignedchannel. When you release the PTT button, theEmergency call is discontinued after the EmergencyCall Hang Time expires.If your radio was configured for Emergency with Voiceto Follow, use the “hot mic” period to explain yourerror, then press and release the PTT button todiscontinue the transmission. The Emergency call isdiscontinued after the Emergency Call Hang Timeexpires.Text Message FeaturesYour radio is able to receive data, for example a textmessage, from another radio or a text messageapplication.Advanced Features in Connect Plus Mode222English
The maximum length of characters for sending a textmessage, including the subject line (seen whenreceiving message from an e-mail application),depends on CPS configuration which can beconfigured up to maximum 280 characters. Your radiocan receive a text message with maximum length of280 characters.If user forwards a text message with characters morethan the maximum length, the text message will betruncated to the maximum length.The radio exits the current screen once the inactivitytimer expires.Note:Long press at any time to return to theHome screen.Writing and Sending a Text Message1Access the Text Message feature.RadioControlsStepsProgram-med TextPress the programmed Text Mes-sage button.RadioControlsStepsMessagebuttonMenu 1 to access the menu.2 or to Messages andpress to select.2 or to Compose and press to select.A blinking cursor appears.3Use the keypad to type your message.Press to move one space to the left. Press orthe key to move one space to the right.Press the key to delete any unwantedcharacters. Long press to change text entrymethod.4Press once message is composed.Advanced Features in Connect Plus Mode223English
5If you are sending the message, select therecipient by• or to the required alias and press to select.• or to Manual Dial, and press toselect. The first line of the display showsNumber:. The second line of the display showsa blinking cursor. Key in the subscriber alias orID and press .The display shows Sending Message, confirmingyour message is being sent.If the message is sent successfully, a tone soundsand the display shows Message Sent.If the message cannot be sent, a low tone soundsand the display shows Message Send Failed.If the text message fails to send, the radio returnsyou to the Resend option screen (see ManagingFail-to-Send Text Messages on page 228).Sending a Quick Text MessageYour radio supports a maximum of 10 Quick Textmessages as programmed by your dealer.While Quick Text messages are predefined, you canedit each message before sending it.1Access the Text Message feature.RadioControlsStepsProgram-med TextMessagebuttonPress the programmed Text Mes-sage button.Menu 1 to access the menu.2 or to Messages andpress to select.2 or to Quick Text and press to select.3 or to the required Quick Text and press to select.Advanced Features in Connect Plus Mode224English
A blinking cursor appears.4Use the keypad to edit the message, if required.Press to move one space to the left. Press orthe key to move one space to the right.Press the key to delete any unwantedcharacters. Long press to change the textentry method.5Press once message is composed.6Depending on whether you want to send, save, re-edit, or delete the newly composed message, doone of the following.• or to Send, and press to send themessage.• or to Save, and press to save themessage to the Drafts folder.• to edit the message.• again to choose between deleting themessage or saving it to the Drafts folder.7If you are sending the message, select therecipient by• or to the required alias and press to select.• or to Manual Dial, and press toselect. The first line of the display showsNumber:. The second line of the display showsa blinking cursor. Key in the subscriber alias orID and press .The display shows Sending Message, confirmingyour message is being sent.If the message is sent successfully, a tone soundsand the display shows Message Sent.If the message cannot be sent, a low tone soundsand the display shows Message Send Failed.If the text message fails to send, the radio returnsyou to the Resend option screen (see ManagingFail-to-Send Text Messages on page 228).Advanced Features in Connect Plus Mode225English
Sending a Quick Text Message with the One TouchAccess ButtonPress the programmed One Touch Accessbutton to send a predefined Quick Text messageto a predefined alias.The display shows Sending Message, confirmingyour message is being sent.If the message is sent, a tone sounds and the displayshows Message Sent.If the message cannot be sent, a low tone soundsand the display shows Message Send Failed.If the text message fails to send, the radio returns youto the Resend option screen (see Managing Fail-to-Send Text Messages on page 228).Accessing the Drafts FolderYou can save a text message to send it at a latertime.If a PTT button press or a mode change causes theradio to exit the text message writing/editing screenwhile you are in the process of writing or editing a textmessage, your current text message is automaticallysaved to the Drafts folder.The most recent saved text message is always addedto the top of the Drafts list.The Drafts folder stores a maximum of ten (10) lastsaved messages. When the folder is full, the nextsaved text message automatically replaces the oldesttext message in the folder.Note:Long press at any time to return to theHome screen.Viewing a Saved Text Message1Access the Text Message feature.Radio Con-trolsStepsProgrammedText MessagebuttonPress the programmed TextMessage button.Menu 1 to access the menu.2 or to Messages andpress to select.Advanced Features in Connect Plus Mode226English
2 or to Drafts and press to select.3 or to the required message and press to select.Editing and Sending a Saved Text Message1Press again while viewing the message.2 or to Edit and press to select.A blinking cursor appears.3Use the keypad to type your message.Press to move one space to the left. Press orthe key to move one space to the right.Press the key to delete any unwantedcharacters. Long press to change text entrymethod.4Press once message is composed.5Select the message recipient by• or to the required alias and press to select.• or to Manual Dial, and press toselect. The first line of the display showsNumber:. The second line of the display showsa blinking cursor. Key in the subscriber alias orID and press .The display shows Sending Message, confirmingyour message is being sent.If the message is sent successfully, a tone soundsand the display shows Message Sent.If the message cannot be sent, a low tone soundsand the display shows Message Send Failed.If the text message cannot be sent, it is moved tothe Sent Items folder and marked with a SendFailed icon.Deleting a Saved Text Message from Drafts1Access the Text Message feature.Advanced Features in Connect Plus Mode227English
Radio Con-trolsStepsProgrammedText MessagebuttonPress the programmed TextMessage button.Menu 1 to access the menu.2 or to Messages andpress to select.2 or to Drafts and press to select.3 or to the required message and press to select.4Press again while viewing the message.5 or to Delete and press to delete thetext message.Managing Fail-to-Send Text MessagesYou can select one of the following options while atthe Resend option screen:• Resend•Forward• EditResending a Text MessagePress to resend the same message to thesame subscriber/group alias or ID.If the message is sent successfully, a tone soundsand the display shows the positive mini notice.If the message cannot be sent, the display showsthe negative mini notice.Forwarding a Text MessageSelect Forward to send the message to anothersubscriber/group alias or ID.1 or to Forward and press to select.2Select the message recipient byAdvanced Features in Connect Plus Mode228English
• or to the required alias or ID and press to select.• or to Manual Dial, and press toselect. The first line of the display showsNumber:. The second line of the display showsa blinking cursor. Key in the subscriber alias orID and press .The display shows Sending Message, confirmingyour message is being sent.If the message is sent successfully, a tone soundsand the display shows Message Sent.If the message cannot be sent, a low tone soundsand the display shows Message Send Failed.Editing a Text MessageSelect Edit to edit the message before sending it.1 or to Edit and press to select.A blinking cursor appears.2Use the keypad to edit your message.Press to move one space to the left. Press orthe key to move one space to the right.Press the key to delete any unwantedcharacters. Long press to change text entrymethod.3Press once message is composed.4Depending on whether you want to send, save, re-edit, or delete the newly composed message, doone of the following.• or to Send, and press to send themessage.• or to Save, and press to save themessage to the Drafts folder.• to edit the message.• again to choose between deleting themessage or saving it to the Drafts folder.5If you are sending the message, select therecipient byAdvanced Features in Connect Plus Mode229English
• or to the required alias or ID and press to select.• or to Manual Dial, and press toselect. The first line of the display showsNumber:. The second line of the display showsa blinking cursor. Key in the subscriber alias orID and press .The display shows Sending Message, confirmingyour message is being sent.If the message is sent successfully, a tone soundsand the display shows Message Sent.If the message cannot be sent, a low tone soundsand the display shows Message Send Failed.Managing Sent Text MessagesOnce a message is sent to another radio, it is savedin Sent Items. The most recent sent text message isalways added to the top of the Sent Items list.The Sent Items folder is capable of storing amaximum of thirty (30) last sent messages. When thefolder is full, the next sent text message automaticallyreplaces the oldest text message in the folder.Note:Long press at any time to return to theHome screen.Viewing a Sent Text Message1Access the Text Message feature.RadioControlsStepsProgram-med TextMessagebuttonPress the programmed Text Mes-sage button.Menu 1 to access the menu.2 or to Messages andpress to select.2 or to Sent Items and press to select.3 or to the required message and press to select.Advanced Features in Connect Plus Mode230English
The icon at the top right corner of the screenindicates the status of the message (see Sent ItemIcons on page 180).Sending a Sent Text MessageYou can select one of the following options whileviewing a sent text message:• Resend•Forward• Edit• Delete1Press again while viewing the message.2 or to one of the following options andpress to select.Option StepsForward Select Forward to send the selectedtext message to another subscriber/group alias or ID (see Forwarding aText Message on page 228).Option StepsEdit Select Edit to edit the selected textmessage before sending it (see Ed-iting a Text Message on page 229).Delete Select Delete to delete the textmessage.Resend Select Resend to resend the select-ed text message to the same sub-scriber/group alias or ID.The display shows Sending Mes‐sage, confirming that the same mes-sage is being sent to the same tar-get radio.If the message is sent successfully,a tone sounds and the displayshows Message Sent.If the message cannot be sent, alow tone sounds and the displayshows Message Send Failed.If the message fails to send, the ra-dio returns you to the Resend optionAdvanced Features in Connect Plus Mode231English
Option Stepsscreen. Press to resend themessage to the same subscriber/group alias or ID.Note:If you exit the messagesending screen while themessage is being sent, theradio updates the status ofthe message in the SentItems folder without provid-ing any indication in the dis-play or via sound.Note:If the radio changes mode orpowers down before the sta-tus of the message in SentItems is updated, the radiocannot complete any In-Progress messages and au-tomatically marks it with aSend Failed icon.Option StepsNote:The radio supports a maxi-mum of five (5) In-Progressmessages at one time. Dur-ing this period, the radiocannot send any new mes-sage and automaticallymarks it with a Send Failedicon.If you exit the message sending screen while themessage is being sent, the radio updates thestatus of the message in the Sent Items folderwithout providing any indication in the display orvia sound.If the radio changes mode or powers down beforethe status of the message in Sent Items isupdated, the radio cannot complete any In-Progress messages and automatically marks itwith a Send Failed icon.The radio supports a maximum of five (5) In-Progress messages at one time. During thisAdvanced Features in Connect Plus Mode232English
period, the radio cannot send any new messageand automatically marks it with a Send Failed icon.Deleting All Sent Text Messages from Sent Items1Access the Text Message feature by performingone of the following actions:Radio Con-trolsStepsProgrammedText MessagebuttonPress the programmed TextMessage button.Menu 1 to access the menu.2 or to Messages andpress to select.2 or to Sent Items and press to select.When you select Sent Items and it contains notext messages, the display shows List Empty,and sounds a low tone if Keypad Tones are turnedon (see Turning Keypad Tones On or Off on page144).3 or to Delete All and press to select.4Choose one of the following.• or to Yes and press to select. Thedisplay shows positive mini notice.• or to No and press to return to theprevious screen.Receiving a Text MessageWhen your radio receives a message, the displayshows the Notification List with the alias or ID of thesender and the Message icon.You can select one of the following options whenreceiving a text message:• Read•Read Later• DeleteReading a Text Message1 or to Read? and press to select.Selected message in the Inbox opens.Advanced Features in Connect Plus Mode233English
2Do one of the following:•Press to return to the Inbox.•Press a second time to reply, forward, ordelete the text message.Managing Received Text MessagesUse the Inbox to manage your text messages. TheInbox is capable of storing a maximum of 30messages.Text messages in the Inbox are sorted according tothe most recently received.Your radio supports the following options for textmessages:• Reply•Forward• Delete• Delete AllNote:If the channel type is not a match, you canonly forward, delete, or delete all Receivedmessages.Long press at any time to return to theHome screen.Viewing a Text Message from the Inbox1 to access the menu.2 or to Messages and press to select.3 or to Inbox and press to select.4 or toview the messages.5Do one of the following:•Press to select the current message, andpress again to reply, quick reply, forward,or delete that message.•Long press to return to the Homescreen.Replying to a Text Message from the Inbox1Access the Text Message feature.Advanced Features in Connect Plus Mode234English
RadioControlsStepsProgram-med TextMessagebuttonPress the programmed Text Mes-sage button.Menu 1 to access the menu.2 or to Messages andpress to select.2 or to Inbox and press to select.3 or to the required message and press to select.4Press once more to access the sub-menu.5Do one of the following:• or to Reply and press to select.• or to Quick Reply and press toselect.A blinking cursor appears.6Use your keypad to write/edit your message.7Press once message is composed.The display shows Sending Message, confirmingyour message is being sent.If the message is sent successfully, a tone soundsand the display shows Message Sent.If the message cannot be sent, a low tone soundsand the display shows Message Send Failed.If the message cannot be sent, the radio returnsyou to the Resend option screen (see ManagingFail-to-Send Text Messages on page 228).Deleting a Text Message from the Inbox1Access the Text Message feature by performingone of the following actions:Advanced Features in Connect Plus Mode235English
Radio Con-trolsStepsProgrammedText MessagebuttonPress the programmed TextMessage button.Menu 1 to access the menu.2 or to Messages andpress to select.2 or to Inbox and press to select.3 or to the required message and press to select.4Press once more to access the sub-menu.5 or to Delete and press to select.6 or to Yes and press to select.The display shows Message Deleted, and thescreen returns to the Inbox.Deleting All Text Messages from the Inbox1Access the Text Message feature by performingone of the following actions:Radio Con-trolsStepsProgrammedText MessagebuttonPress the programmed TextMessage button.Menu 1 to access the menu.2 or to Messages andpress to select.2 or to Inbox and press to select.When you select Inbox and it contains no textmessages, the display shows List Empty, andsounds a low tone if Keypad Tones are turned on(see Turning Keypad Tones On or Off on page144).Advanced Features in Connect Plus Mode236English
3 or to Delete All and press to select.4 or to Yes and press to select.The display shows Inbox Cleared.PrivacyIf enabled, this feature helps to preventeavesdropping by unauthorized users on a channelby the use of a software-based scrambling solution.The signaling and user identification portions of atransmission are not scrambled.Your radio must have privacy enabled on the currentchannel selector position to send a privacy-enabledtransmission, although this is not a necessaryrequirement for receiving a transmission. While on aprivacy-enabled channel selector position, the radio isstill able to receive clear (unscrambled)transmissions.Your radio supports Enhanced Privacy.To unscramble a privacy-enabled call transmission,your radio must be programmed to have the sameKey Value and Key ID (for Enhanced Privacy) as thetransmitting radio.If your radio receives a scrambled call that is of adifferent Key Value and Key ID, you hear nothing atall (Enhanced Privacy).If the radio has a privacy type assigned, the Homescreen shows the Secure or Unsecure icon, exceptwhen the radio is sending or receiving an Emergencycall or alarm.The LED lights up solid green while the radio istransmitting and blinks green rapidly when the radio isreceiving an ongoing privacy-enabled transmission.You can access this feature by performing one of thefollowing actions:• Pressing the programmed Privacy button totoggle privacy on or off.• Using the Radio Menu as described by the stepsdescribed next.Note:Some radio models may not offer this Privacyfeature. Check with your dealer or systemadministrator for more information.1 to access the menu.Advanced Features in Connect Plus Mode237English
2 or to Utilities and press to select.3 or to Radio Settings or or toConnect Plus and press to select.4 or to Enhanced Privacy.If the display shows Turn On, press to enablePrivacy. The radio displays a message confirmingyour selection.If the display shows Turn Off, press todisable Privacy. The radio displays a messageconfirming your selection.If the radio has a privacy type assigned, thesecure or unsecure icon appears on the statusbar, except when the radio is sending or receivingan Emergency Alert.Making a Privacy-Enabled (Scrambled) CallToggle privacy on using the programmed privacybutton or by using the menu. Your radio must havethe Privacy feature enabled for the currently selectedchannel position to send a privacy-enabledtransmission. When privacy is enabled for thecurrently selected channel position, all voicetransmissions made by your radio will be scrambled.This includes Group Call, Multigroup Call, talk-backduring scanned calls, Site All Call, Emergency Call,and Private Call. Only receiving radios with the sameKey Value and Key ID as your radio will be able tounscramble the transmission.Covert ModeYour radio is capable of Covert Mode. During covertmode, all keypad and programmed button access areblocked. When enabled, all visual indications (display,LED's and backlight) are disabled.This feature allows audio or tone only via a wiredaccessory or a Bluetooth accessory.Entering Covert ModePress the button followed by the 2, 5, and 8numeric keys in tandem in home screen.Exiting Covert ModeTo exit Covert Mode, do one of the following:Advanced Features in Connect Plus Mode238English
•Press the button followed by the 2, 5, and 8numeric keys in tandem. Radio will go back tonormal mode.• Power cycle the radio via the On/Off button.SecurityYou can enable or disable any radio in the system.For example, you might want to disable a stolenradio, to prevent the thief from using it, and enablethat radio, when it is recovered.Note:Performing Radio Disable and Enable islimited to radios with these functions enabled.Check with your dealer or systemadministrator for more information.Radio Disable1Access this feature byRadioControlsStepsRadio Dis-able but-ton1Press the programmed RadioDisable button.RadioControlsSteps2 or to the required alias orID and press to select.Radiomenu 1 to access the menu.2 or to Contacts andpress to select. The entriesare alphabetically sorted.3Use one of the steps describednext to select the required sub-scriber alias or ID:• Select the required alias or IDdirectly.• or to the requiredalias or ID and press to select.•Use the Manual Dial menuAdvanced Features in Connect Plus Mode239English
RadioControlsSteps• or to Manual Di‐al and press to select.• or to Radio Num‐ber and press to se-lect.• The first line of the displayshows Radio Number:.The second line of the dis-play shows a blinking cur-sor. Use the keypad to en-ter the subscriber alias orID and press .4 or to Radio Disableand press to select.The display shows Radio Disable: <TargetAlias or ID> and the LED blinks green.2Wait for acknowledgement.If successful, a positive indicator tone sounds andthe display shows Radio Disable Successful.If not successful, a negative indicator tone soundsand the display shows Radio Disable Failed.Radio Enable1Access this feature byRadioCon-trolsStepsRadioEnablebutton1Press the programmed Radio Ena-ble button.2 or to the required alias or IDand press to select.Radiomenu 1 to access the menu.2 or to Contacts and press to select. The entries are alpha-betically sorted.Advanced Features in Connect Plus Mode240English
RadioCon-trolsSteps3Use one of the steps described nextto select the required subscriberalias or ID• Select the required alias or ID di-rectly.• or to the requiredalias or ID and press toselect.•Use the Manual Dial menu• or to Manual Dialand press to select.• or to Radio Numberand press to select.• The first line of the displayshows Radio Number:. Thesecond line of the displayRadioCon-trolsStepsshows a blinking cursor. Usethe keypad to enter the sub-scriber alias or ID and press.4 or to Radio Enable andpress to select.The display shows Radio Enable: <SubscriberAlias or ID> and the LED lights up solid green.2Wait for acknowledgement.If successful, a positive indicator tone sounds andthe display shows Radio Enable Successful.If not successful, a negative indicator tone soundsand the display shows Radio Enable Failed.Advanced Features in Connect Plus Mode241English
Password Lock FeaturesIf enabled, this feature only allows you access yourradio if the correct password is entered uponpowering up.Accessing the Radio from Password1Power up the radio.The radio sounds a continuous tone.2Do one of the following:• Enter your current four-digit password with theradio’s keypad. The display shows . Press to proceed.• Enter your current four-digit password. Press or to edit each digit’s numeric value.Each digit changes to . Press to move tonext digit. Press to confirm your selection.You hear a positive indicator tone for every digitentered. Press to remove each on thedisplay. The radio sounds a negative indicatortone, if you press when the line is empty, or ifyou press more than four digits.If the password is correct, the radio proceeds topower up. See Powering Up the Radio on page24.If the password is incorrect, the display showsWrong Password. Repeat Step 2.After the third incorrect password, the displayshows Wrong Password and then, shows RadioLocked. A tone sounds and the LED double blinksyellow.Note:The radio is unable to receive any call,including emergency calls, in locked state.Turning the Password Lock On or Off1 to access the menu.2 or to Utilities and press to select.Advanced Features in Connect Plus Mode242English
3 or to Radio Settings and press toselect.4 or to Passwd Lock and press toselect.5Enter the four-digit password.See Step 2 in Accessing the Radio from Passwordon page 242.6Press to proceed.If the password is incorrect, the display showsWrong Password, and automatically returns to theprevious menu.7If the password entered in the previous step iscorrect, press to enable/disable passwordlock.The display shows beside Enabled.The disappears from beside Enabled.Unlocking the Radio from Locked State1If your radio was powered down after being in thelocked state, power up the radio.A tone sounds and the LED double blinks yellow.The display shows Radio Locked.2Wait for 15 minutes.Your radio restarts the 15 minutes timer for lockedstate when you power up.3Repeat Steps 1 and 2 in Accessing the Radio fromPassword on page 242.Changing the Password1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Passwd Lock and press toselect.Advanced Features in Connect Plus Mode243English
5Enter the four-digit password.See Step 2 in Accessing the Radio from Passwordon page 242.6Press to proceed.If the password is incorrect, the display showsWrong Password, and automatically returns to theprevious menu.7If the password entered in the previous step iscorrect, or to Change Pwd and press to select.8Enter a new four-digit password.See Step 2 in Accessing the Radio from Passwordon page 242.9Reenter the previously entered four-digitpassword. See Step 2 in Accessing the Radiofrom Password on page 242.10 Press to proceed.If the reentered password matches the newpassword entered earlier, the display showsPassword Changed.If the reentered password does NOT match thenew password entered earlier, the display showsPasswords Do Not Match.The screen automatically returns to the previousmenu.Bluetooth OperationNote:If disabled via the CPS, all Bluetooth-relatedfeatures are disabled and the Bluetooth devicedatabase is erased.This feature allows you to use your radio with aBluetooth-enabled device (accessory) via a wirelessBluetooth connection. Your radio supports bothMotorola and COTS (Commercially available Off-The-Shelf) Bluetooth-enabled devices.Bluetooth operates within a range of 10 meters (32feet) line of sight. This is an unobstructed pathbetween your radio and your Bluetooth-enableddevice.Advanced Features in Connect Plus Mode244English
It is not recommended that you leave your radiobehind and expect your Bluetooth-enabled device towork with a high degree of reliability when they areseparated.At the fringe areas of reception, both voice and tonequality will start to sound “garbled” or “broken”. Tocorrect this problem, simply position your radio andBluetooth-enabled device closer to each other (withinthe 10-meter/32 feet defined range) to re-establishclear audio reception. Your radio’s Bluetooth functionhas a maximum power of 2.5 mW (4 dBm) at the 10-meter/32 feet range.Your radio can support up to 4 simultaneousBluetooth connections with Bluetooth-enableddevices of unique types. For example, a headset, anda PTT-Only Device (POD). Multiple connections withBluetooth-enabled devices of the same type are notsupported.Refer to your respective Bluetooth-enabled device’suser manual for more details on your Bluetooth-enabled device’s full capabilities.Turning Bluetooth On and Off1 to access the menu.2 or to Bluetooth and press to select.3 or to My Status and press to select.The display shows On and Off. The current statusis indicated by a .4Do one of the following:• or to On and press to select. Thedisplay shows On and a appears left of theselected status.• or to Off and press to select. Thedisplay shows Off and a appears left of theselected status.Finding and Connecting to a Bluetooth DeviceDo not turn off your Bluetooth-enabled device orpress during the finding and connectingoperation as this cancels the operation.1Turn on your Bluetooth-enabled device and placeit in pairing mode. Refer to respective Bluetooth-enabled device’s user manual.Advanced Features in Connect Plus Mode245English
2On your radio, press to access the menu.3 or to Bluetooth and press to select.4 or to Devices and press to select.5Do one of the following:• or to the required device and press to select.• or to Find Devices to locate availabledevices. or to the required device andpress to select.6 or to Connect and press to select.Display shows Connecting to <Device>. YourBluetooth-enabled device may require additionalsteps to complete the pairing. Refer to respectiveBluetooth-enabled device’s user manual.If successful, the radio display shows<Device>Connected. A tone sounds and appearsbesides the connected device. The BluetoothConnected icon appears on the status bar.If unsuccessful, the radio display shows ConnectingFailed.Note:If pin code is required, use the same entrymethod as Step 2 in Accessing the Radio fromPassword on page 242.Finding and Connecting from a Bluetooth Device(Discoverable Mode)Do not turn off your Bluetooth or your radio during thefinding and connecting operation as this may cancelthe operation.1Turn Bluetooth On.See Turning Bluetooth On and Off on page 133.2 to access the menu.3 or to Bluetooth and press to select.4 or to Find Me and press to select.Advanced Features in Connect Plus Mode246English
Your radio can now be found by other Bluetooth-enabled devices for a programmed duration. Thisis called Discoverable Mode.5Turn on your Bluetooth-enabled device and pair itwith your radio.Refer to respective Bluetooth-enabled device’suser manual.Disconnecting from a Bluetooth Device1On your radio, press to access the menu.2 or to Bluetooth and press to select.3 or to Devices and press to select.4 or to the required device and press toselect.5 or to Disconnect and press to select.Display shows Disconnecting from <Device>.Your Bluetooth-enabled device may requireadditional steps to disconnect. Refer to respectiveBluetooth-enabled device’s user manual.The radio display shows <Device> Disconnected. Apositive indicator tone sounds and disappearsbeside the connected device. The BluetoothConnected icon disappears on the status bar.Switching Audio Route between Internal Radio Speakerand Bluetooth DeviceYou can toggle audio routing between internal radiospeaker and external Bluetooth-enabled accessory.Press the programmed Bluetooth Audio Switchbutton.•A tone sounds and display shows Route Audioto Radio.•A tone sounds and display shows Route Audioto Bluetooth.Viewing Device Details1 to access the menu.2 or to Bluetooth and press to select.Advanced Features in Connect Plus Mode247English
3 or to Devices and press to select.4 or to the required device and press toselect.5 or to View Details and press toselect.Editing Device NameYou can edit the name of available Bluetooth-enableddevices.1 to access the menu.2 or to Bluetooth and press to select.3 or to Devices and press to select.4 or to the required device and press toselect.5 or to Edit Name and press to select.6Press to move one space to the left. Press tomove one space to the right. Press to deleteany unwanted characters. Long press tochange text entry method.A blinking cursor appears. Use the keypad to typethe required zone.7The display shows Device Name Saved.Deleting Device NameYou can remove a disconnected device from the listof Bluetooth-enabled devices.1 to access the menu.2 or to Bluetooth and press to select.3 or to Devices and press to select.4 or to the required device and press toselect.Advanced Features in Connect Plus Mode248English
5 or to Delete and press to select.The display shows Device Deleted.Bluetooth Mic GainAllows control of the connected Bluetooth-enableddevice’s microphone gain value.1 to access the menu.2 or to Bluetooth and press to select.3 or to BT Mic Gain and press toselect.4 or to the BT Mic Gain type and the currentvalues.To edit values, press to select.5 or to increase or to decrease values andpress to select.Permanent Bluetooth Discoverable ModeNote:The Permanent Bluetooth Discoverable Modecan only be enabled via the MOTOTRBOCPS. If enabled, the Bluetooth item will notbe displayed in the Menu and you will not beable to use any Bluetooth programmablebutton features.Other Bluetooth-enabled devices can locate yourradio, but the devices cannot connect to the radio. Itenables dedicated devices to use your radio positionin the process of Bluetooth-based location.Notification ListYour radio has a Notification List that collects all your“unread” events on the channel, such as unread textmessages, missed calls, and call alerts.The Notification icon appears on the status bar whenthe Notification List has one or more events.The list supports a maximum of forty (40) unreadevents. When it is full, the next event automaticallyreplaces the oldest event.Advanced Features in Connect Plus Mode249English
Note:After the events are read, they are removedfrom the Notification List.Accessing the Notification List1 to access the menu.2 or to Notification and press toselect.3 or to the required event and press toselect.Long press to return to the Home Screen.Wi-Fi OperationWi-Fi® is a registered trademark of Wi-Fi Alliance®.Note:This feature is applicable to SL7550e/SL7590e/SL7580e only.This feature allows you to setup and connect to a Wi-Fi® network. Wi-Fi supports updates for radiofirmware, codeplug, and resources such as languagepacks and voice announcement.Turning Wi-Fi On or OffNote:This feature is applicable to SL7550e/SL7590e/SL7580e only.The programmed Wi-Fi On or Off button isassigned via CPS. Check with your dealer orsystem administrator to determine how yourradio has been programmed.You can turn on or turn off Wi-Fi® by performing oneof the following actions.•Press the programmed Wi-Fi On or Off button.Voice Announcement sounds Turning On Wi-Fi orTurning Off Wi-Fi.•Access this feature via the menu.a) Press to access the menu.b) Press or to WiFi and press toselect.Advanced Features in Connect Plus Mode250English
c) Press or to WiFi Status and press to select.Press to turn on Wi-Fi. The display shows beside Enabled.Press to turn off Wi-Fi. The disappearsfrom beside Enabled.If Wi-Fi is enabled and a low capacity battery is used,an alert screen is displayed upon power up with thefollowing notice.•Low Capacity Battery!•Tx power restricted to 2W and Wi-Fidisabled.•Use a compatible battery to liftrestriction.•Press to continue.Lift the restriction to enable 3W operation and Wi-Fiby performing the following action. Power off the radioand change to a compatible battery such as Lithium-Ion 1800 mAh Battery Pack (HKNN4013_) andLithium-Ion 2200 mAh Battery Pack (PMNN4459_) orLithium-Ion 2300mAh Battery Pack (PMNN4468_).If Wi-Fi is disabled and a low capacity battery is used,the transmit power is restricted to 2W.Connecting to a Network Access PointNote:This feature is applicable to SL7550e/SL7590e/SL7580e only.When you turn on Wi-Fi®, the radio scans andconnects to a network access point.You can also connect to a network access point viathe menu.1Press to access the menu.2Press or to WiFi and press to select.3Press or to Networks and press toselect.4Press or to a network access point andpress to select.Advanced Features in Connect Plus Mode251English
5Press or to Connect and press toselect.6Enter the password and press .When the connection is successful, the radiodisplays a notice and the network access point issaved into the profile list.Refreshing the Network ListNote:This feature is applicable to SL7550e/SL7590e/SL7580e only.•Perform the following actions to refresh thenetwork list.a) Press to access the menu.b) Press or to WiFi and press toselect.c) Press or to Networks and press toselect.When you enter the Networks menu, the radioautomatically refreshes the network list.•If you are already in the Networks menu, performthe following action to refresh the network list.a) Press or to Refresh and press toselect.The radio refreshes and displays the latestnetwork list.Adding a NetworkNote:This feature is applicable to SL7550e/SL7590e/SL7580e only.If a preferred network is not in the available networklist, perform the following actions to add a network.1Press to access the menu.2Press or to WiFi and press to select.3Press or to Networks and press toselect.Advanced Features in Connect Plus Mode252English
4Press or to Add Network and press toselect.5Enter the Service Set Identifier (SSID) and press.6Press or to Open and press to select.7Enter the password and press .The radio displays to indicate that thenetwork is successfully saved.Viewing Details of Network Access PointsNote:This feature is applicable to SL7550e/SL7590e/SL7580e only.Perform the following actions to view details ofnetwork access points.1Press to access the menu.2Press or to WiFi and press to select.3Press or to Networks and press toselect.4Press or to a network access point andpress to select.5Press or to View Details and press to select.For a connected network access point, the ServiceSet Identifier (SSID), Security Mode, MediaAccess Control (MAC) address, and InternetProtocol (IP) address are displayed.For a non-connected network access point, theService Set Identifier (SSID) and Security Modeare displayed.Removing Network Access PointsNote:This feature is applicable to SL7550e/SL7590e/SL7580e only. Enterprise networkAdvanced Features in Connect Plus Mode253English
access points that are added via CPS can onlybe removed via CPS.Perform the following actions to remove networkaccess points from the profile list.1Press to access the menu.2Press or to WiFi and press to select.3Press or to Networks and press toselect.4Press or to the selected network accesspoint and press to select.5Press or to Remove and press toselect.6Press or to Yes and press to select.The radio displays to indicate that theselected network access point is successfullyremoved.UtilitiesTurning the Radio Tones/Alerts On or OffYou can enable and disable all radio tones and alerts(except for the incoming Emergency alert tone) ifneeded.Press the programmed All Tones/Alerts button totoggle all tones on or off, or follow the proceduredescribed next to access this feature via the radiomenu.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Tones/Alerts and press toselect.5 or to All Tones and press to select.Advanced Features in Connect Plus Mode254English
6Press to enable/disable all tones and alerts.The display shows beside Enabled.The disappears from beside Enabled.Turning Keypad Tones On or OffYou can enable and disable keypad tones if needed.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Tones/Alerts and press toselect.5 or to Keypad Tones and press toselect.You can also use or to change the selectedoption.6Press to enable/disable keypad tones.The display shows beside Enabled.The disappears from beside Enabled.Setting the Tone Alert Volume Offset LevelYou can adjust the Tone Alert Volume Offset level ifneeded. This feature adjusts the volume of the tones/alerts, allowing it to be higher or lower than the voicevolume.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Tones/Alerts and press toselect.5 or to Vol. Offset and press toselect.Advanced Features in Connect Plus Mode255English
6 or to the required volume value.The radio sounds a feedback tone with eachcorresponding volume value.7Do one of the following:•Press to keep the required displayedvolume value.•Press to exit without changing thecurrent volume offset settings.• Repeat Step 6 to select another volume value.Turning the Talk Permit Tone On or OffYou can enable and disable the Talk Permit Tone ifneeded.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Tones/Alerts and press toselect.5 or to Talk Permit and press toselect.You can also use or to change the selectedoption.6Press to enable/disable the Talk Permit Tone.The display shows beside Enabled.The disappears from beside Enabled.Setting the Power LevelNote:This feature is applicable to SL7550e/SL7590e/SL7580e only with a frequency bandwidth of 403MHz–470MHz or470.000005MHz–527MHz. Select the value ofhigh transmit power in CPS. Check with yourdealer or system administrator to determinehow your radio has been programmed.Advanced Features in Connect Plus Mode256English
You can customize your radio’s power setting to highor low for each Connect Plus zone.High enables communication with tower sites inConnect Plus mode located at a considerabledistance from you. Low enables communication withtower sites in Connect Plus mode in closer proximity.Press the programmed Power Level button to toggletransmit power level between high and low. Followthe procedure described next to access this featurevia the radio menu.1Press to access the menu.2Press or to Utilities and press toselect.3Press or to Radio Settings and press to select.4Press or to Power and press to select.5Press or to the required setting and press to select. appears beside selected setting. At any time,long press to return to the Home screen.Screen returns to the previous menu.Changing the Display ModeYou can change radio’s display mode between Dayor Night, as needed. This affects the color palette ofthe display.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Display and press to select.The display shows Day Mode and Night Mode.Note: or to change the selected option.Advanced Features in Connect Plus Mode257English
5 or to the required setting and press toenable. appears besides selected setting.Adjusting the Display BrightnessYou can adjust the display brightness of the radio asneeded.Note:Display brightness cannot be adjusted whenAuto Brightness is enabled.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Display and press to select.5 or to Brightness and press to select.The display shows a progress bar.6Decrease display brightness by pressing orincrease the display brightness by pressing .Select from setting of 1 to 8. Press to confirmyour entry.Setting the Display Backlight TimerYou can set the the radio’s display backlight timer asneeded. The setting also affects the Menu NavigationButtons and keypad backlighting accordingly.Press the programmed Backlight button to toggle thebacklight settings, or follow the procedure describednext to access this feature via the radio menu.The display backlight and keypad backlighting areautomatically turned off if the LED indicator isdisabled (see Turning the LED Indicator On or Off onpage 154).1 to access the menu.2 or to Utilities and press to select.Advanced Features in Connect Plus Mode258English
3 or to Radio Settings and press toselect.4 or to Display and press to select.5 or to Backlight Timer and press toselect.You can use or to change the selectedoption.Locking and Unlocking the KeypadYou can lock your radio’s keypad to avoid inadvertentkey entry.To lock/unlock your radio’s keypad.Option StepsLockingthe Key-pad1 to access the menu.2 or to Utilities andpress to select.Option Steps3 or to Radio Settingsand press to select.4 or to Keypad Lock andpress to select.You can also use or tochange the selected option.Unlockingthe Key-padPress followed by .After the keypad is locked, the display showsKeypad Locked and returns to the Home screen.After the keypad is unlocked, the display showsKeypad Unlocked and returns to the Homescreen.LanguageYou can set your radio display to be in your requiredlanguage.Advanced Features in Connect Plus Mode259English
1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Languages and press to select.5 or to the required language and press to enable. appears beside selected language.Turning the LED Indicator On or OffYou can enable and disable the LED Indicator ifneeded.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to LED Indicator and press toselect.You can also use or to change the selectedoption.5Press to enable/disable the LED Indicator.The display shows beside Enabled.The disappears from beside Enabled.Identifying Cable TypeYou can select the type of cable your radio uses.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Cable Type and press to select.Advanced Features in Connect Plus Mode260English
You can also use or to change the selectedoption.5The current cable type is indicated by a .Voice AnnouncementThis feature enables the radio to audibly indicate thecurrent Zone or Channel the user has just assigned,or programmable button press. This audio indicatorcan be customized per customer requirements. Thisis typically useful when the user is in a difficultcondition to read the content shown on the display.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Voice Announcement and press to select.You can also use or to change the selectedoption.5Do one of the following:•Press to enable Voice Announcement. Thedisplay shows beside Enabled.•Press to disable Voice Announcement. The disappears from beside Enabled.Wallpaper ModeYour radio displays the Wallpaper background onhome screen. The user can select from 5 defaultwallpapers.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Display and press to select.Advanced Features in Connect Plus Mode261English
5 or to Wallpaper and press to select.You can also use or to change the selectedoption.Screen Saver ModeThe screen saver feature allows the radio to saveradio battery time. A Screen Saver Pre Durationis used to track the radio activities before enteringscreen saver mode.Radio starts Screen Saver Pre Duration uponpower up. Radio enters into screen saver mode whenScreen Saver Pre Duration timer expires, theradio exits screen saver mode and responds torelated transaction normally upon any user input andover the air transaction.Radio restarts Screen Saver Pre Duration uponany user input and over the air transaction. Afterbeing in Screen Saver mode for 5 seconds, radioenters keypad lock state automatically. When anyaudio or Bluetooth accessory is connected, batterysaver mode is enabled, radio enters screen savermode.If there is any user input or over the air transaction,the radio exits screen saver mode and responds touser interaction. The Screen Saver Pre Durationis restarted and the radio goes back to screen savermode when it expires.Note:The screen saver mode is to help improvebattery life.Audio AccessoryThe audio accessory has two modes: Normal andBattery Saver mode. When audio accessory isplugged in and the setting is in Battery Saver Mode,the radio restarts the timer and goes into screensaver mode. In this scenario, when there is any userinput (including user input on radio and accessoryattachment/detachment) or when receivingemergency alarm/call, the radio exits screen savermode and responds to user event as normal. TheScreen Saver timer restarts and the radio goes backto screen saver mode when the time allocatedexpires.Auto Keypad LockYou can enable/disable your radio’s auto keypad lockto avoid inadvertent key entry.Advanced Features in Connect Plus Mode262English
1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Auto Keypad Lock and press toselect.5Do one of the following:•Press to enable Auto Keypad Lock. Thedisplay shows beside Enabled.•Press to disable Auto Keypad Lock. The disappears from beside Enabled.Digital Mic AGC (Mic AGC-D)This feature controls the your radio's microphone gainautomatically while transmitting on a digital system. Itsuppresses loud audio or boosts soft audio to apreset value in order to provide a consistent level ofaudio.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.You can also use or to change the selectedoption.4 or to Mic AGC-D and press to select.5Do one of the following:•Press to enable Mic AGC-D. The displayshows beside Enabled.•Press to disable Mic AGC-D. The disappears from beside Enabled.Intelligent AudioYour radio can automatically adjust its audio volumeto overcome background noise in the environment,inclusive of all stationary and non-stationary noiseAdvanced Features in Connect Plus Mode263English
sources. This feature is a Receive-only feature anddoes not affect Transmit audio.Note:This feature is not applicable during aBluetooth session.1 to access the menu.RadioCon-trolStepsMenu 1 to access the menu.2 or to Radio Settings andpress to select.3 or to Radio Settings andpress to select.4 or to Intelligent Audioand press to select.RadioCon-trolStepsNote:You can also use or tochange the selected option.5Do one of the following:•Press to enable Intelligent Au-dio. The display shows besideEnabled.•Press to disable IntelligentAudio. The disappears from be-side Enabled.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Intelligent Audio and press to select.Advanced Features in Connect Plus Mode264English
5Do one of the following:•Press to enable Intelligent Audio. Thedisplay shows beside Enabled.•Press to disable Intelligent Audio. The disappears from beside Enabled.See Authorized Accessories List on page 281 forrecommended Bluetooth-enabled audio accessorieswith in-built Automatic Volume Control for similarperformance.Turning the Acoustic Feedback Suppressor Feature Onor OffThis feature allows you to minimize acoustic feedbackin received calls.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to AF Suppressor and press toselect.You can also use or to change the selectedoption.5Do one of the following.•Press to enable Acoustic FeedbackSuppressor. The display shows besideEnabled.•Press to disable Acoustic FeedbackSuppressor. The disappears from besideEnabled.Text Entry ConfigurationYou can configure the following settings for enteringtext on your radio:• Word Predict•Word Correct• Sentence Cap• My WordsYour radio supports the following text entry methods:Advanced Features in Connect Plus Mode265English
• Numbers• Symbols•Predictive or Multi-Tap• Language (If programmed)Note:Press at any time to return to theprevious screen or long press to returnto the Home Screen. The radio exits thecurrent screen once the inactivity timerexpires.Word PredictYour radio can learn common word sequences thatyou often enter. It then predicts the next word youmay want to use after you enter the first word of acommon word sequence into the text editor.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Text Entry and press to select.5 or to Word Predict and press toselect.You can also use or to change the selectedoption.6Do one of the following:•Press to enable Word Predict. The displayshows beside Enabled.•Press to disable Word Predict. The disappears from beside Enabled.Word CorrectSupplies alternative word choices when the wordentered into the text editor is not recognized by the in-built dictionary.1 to access the menu.2 or to Utilities and press to select.Advanced Features in Connect Plus Mode266English
3 or to Radio Settings and press toselect.4 or to Text Entry and press to select.5 or to Word Correct and press toselect.You can also use or to change the selectedoption.6Do one of the following:•Press to enable Word Correct. The displayshows beside Enabled.•Press to disable Word Correct. The disappears from beside Enabled.Sentence CapAutomatically enables capitalization for the first letterin the first word for every new sentence.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Text Entry and press to select.5 or to Sentence Cap and press toselect.6Do one of the following:•Press to enable Sentence Cap. The displayshows beside Enabled.•Press to disable Sentence Cap. The disappears from beside Enabled.Viewing Custom WordsYou can add your own custom words into your radio’sin-built dictionary. Your radio maintains a list tocontain these words.Advanced Features in Connect Plus Mode267English
1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Text Entry and press to select.5 or to My Words and press to select.6 or to List of Words and press toselect.Display shows the list of custom words.Editing Custom WordYou can edit the custom words saved in your radio.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Text Entry and press to select.5 or to My Words and press to select.6 or to List of Words and press toselect.Display shows the list of custom words.7 or to the required word and press toselect.8 or to Edit and press to select.9Use the keypad to edit your custom word.Press to move one space to the left. Press orthe key to move one space to the right.Press the key to delete any unwantedcharacters. Long press to change text entryAdvanced Features in Connect Plus Mode268English
method. Press once your custom word iscompleted.The display shows transitional mini notice, confirmingyour custom word is being saved.If the custom word is saved, a tone sounds and thedisplay shows positive mini notice.If the custom word is not saved, a low tone soundsand the display shows negative mini notice.Adding Custom WordYou can add your own custom words into your radio’sin-built dictionary.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Text Entry and press to select.5 or to My Words and press to select.6 or to Add New Word and press toselect.Display shows the list of custom words.7Use the keypad to edit your custom word.Press to move one space to the left. Press orthe key to move one space to the right.Press the key to delete any unwantedcharacters. Long press to change text entrymethod. Press once your custom word iscompleted.The display shows transitional mini notice, confirmingyour custom word is being saved.If the custom word is saved, a tone sounds and thedisplay shows positive mini notice.If the custom word is not saved, a low tone soundsand the display shows negative mini notice.Advanced Features in Connect Plus Mode269English
Deleting a Custom WordYou can delete the custom words saved in your radio.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Text Entry and press to select.5 or to My Words and press to select.6 or to the required word and press toselect.7 or to Delete and press to select.8Choose one of the following.•At Delete Entry?, press to select Yes.The display shows Entry Deleted.• or to No and press to return to theprevious screen.Deleting All Custom WordsYou can delete all custom words from your radio’s in-built.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press toselect.4 or to Text Entry and press to select.5 or to My Words and press to select.6 or to Delete All and press to select.7Choose one of the following.Advanced Features in Connect Plus Mode270English
•At Delete Entry?, press to select Yes.The display shows Entry Deleted.• or to No and press to return to theprevious screen.Accessing General Radio InformationYour radio contains information on the following:• Battery•Degree of Tilt (Accelerometer)• Radio Model Number Index• Option Board Over-the-Air (OTA) Codeplug CRC• Site Number• Site Info• Radio Alias and ID• Firmware and Codeplug Versions• Open-Source Software InformationPress at any time to return to the previousscreen or long press to return to the Homescreen. The radio exits the current screen once theinactivity timer expires.Accessing the Battery InformationDisplays information on your radio battery.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Info and press to select.4 or to Battery Info and press toselect.The display shows the battery information.For IMPRES batteries ONLY: The display readsRecondition Battery if the battery requiresreconditioning in an IMPRES charger. After thereconditioning process, the display then shows thebattery information.Checking the Radio Model Number IndexThis index number identifies your radio’s model-specific hardware. Your radio system administratormay ask for this number when preparing a newOption Board codeplug for your radio.Advanced Features in Connect Plus Mode271English
1 to access the menu.2 or to Utilities and press to select.3 or to Radio Info and press to select.4 or to Model Index and press toselect.The display shows the Model Number Index.Checking the CRC of the Option Board OTACodeplug FileFollow the instructions below if your radio systemadministrator asks you to view the Option Board OTACodeplug File CRC (Cyclic Redundancy Check). Thismenu option only appears if the Option Boardreceived its last codeplug update OTA.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Info and press to select.4 or to OB OTA CPcrc and press toselect.The display shows some letters and numbers.Communicate this information to your radiosystem administrator exactly as shown.Displaying the Site ID (Site Number)Note:If you are not currently registered at a site, thedisplay shows Not Registered.The radio briefly shows the Site ID as it registers witha Connect Plus site. Following registration, the radiodoes not generally indicate the Site number. Todisplay the registered Site number, do the following:1 to access the menu.2 or to Utilities and press to select.3 or to Radio Info and press to select.Advanced Features in Connect Plus Mode272English
4 or to Site Number and press toselect.The display shows the Network ID and the SiteNumber.Checking the Site InfoNote:If you are not currently registered at a site, thedisplay shows Not Registered.The Site Info feature provides information that can beuseful to a service technician. It consists of thefollowing information:• Repeater number of current Control Channelrepeater.•RSSI: Last signal strength value measured fromControl Channel repeater.• Neighbor List sent by Control Channel repeater(five numbers separated by commas).If you are requested to use this feature, please reportthe displayed information exactly as it appears on thescreen.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Info and press to select.4 or to Site Info and press to select.The display shows the Site Info.Checking the Radio IDThis feature displays the ID of your radio.Follow the procedure described next to access thisfeature via the radio screen.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Info and press to select.4 or to My ID and press to select.The display shows the radio ID.Advanced Features in Connect Plus Mode273English
Checking the Firmware Version and CodeplugVersionDisplays the firmware version on your radio.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Info and press to select.4 or to Versions and press to select.The display a list with the following information:• (Radio) Firmware Version•(Radio) Codeplug Version• Option Board Firmware Version• Option Board Frequency Version• Option Board Hardware Version• Option Board Codeplug VersionChecking for UpdatesConnect Plus provides the ability to update certainfiles (Option Board Codeplug, Network FrequencyFile and Option Board Firmware File) over-the-air.Note:Check with the dealer or network administratorto determine whether this feature has beenenabled for your radio.Any display Connect Plus radio has the ability toshow its current Option Board OTA Codeplug CRC,Frequency File version or Option Board firmware fileversion via a menu option. In addition, display radiosthat have been enabled for over-the-air file transfercan display the version of a "pending file". A "pendingfile" is a Frequency File or Option Board firmware filethat the Connect Plus radio knows about via systemmessaging, but the radio has not yet collected all ofthe file’s packets. If a display Connect Plus radio hasa pending file, the menu provides options to:• See the version number of the pending file.•See what percentage of packets has beencollected so far.• Request the Connect Plus radio to resumecollecting file packets.If the radio is enabled for Connect Plus over-the-airfile transfer, there may be times when the radioautomatically joins a file transfer without first notifyingthe radio user. While the radio is collecting filepackets, the LED rapidly blinks red and the radioAdvanced Features in Connect Plus Mode274English
displays the High Volume Data icon on the HomeScreen status bar.Note:The Connect Plus radio cannot collect filepackets and receive calls at the same time. Ifyou wish to cancel the file transfer, press andrelease the PTT button. This causes the radioto request a call on the selected ContactName, and it will also cancel the file transferfor that radio until the process resumes at alater time.There are several things that can make the filetransfer process start again. The first example appliesto all over-the-air file types. The other examples applyonly to the Network Frequency File and Option BoardFirmware File:• The radio system administrator re-initiates theover-the-air file transfer.•The Option Board's pre-defined timer expires,which causes the Option Board to automaticallyresume the process of collecting packets.• The timer has not yet expired, but the radio userrequests the file transfer to resume via the menuoption.After the Connect Plus radio finishes downloading allfile packets, it must upgrade to the newly acquiredfile. For the Network Frequency File, this is anautomatic process and does not require a radio reset.For the Option Board Codeplug File, this is anautomatic process that will cause a brief interruptionto service as the Option Board loads the newcodeplug information and re-acquires a network site.How quickly the radio upgrades to a new OptionBoard firmware file depends on how the radio hasbeen configured by the dealer or systemadministrator. The radio will either upgradeimmediately after collecting all file packets, or it willwait until the next time that the user turns the radioon.Note:Check with your dealer or systemadministrator to determine how your radio hasbeen programmed.The process of upgrading to a new Option Boardfirmware file takes several seconds, and it requiresthe Connect Plus Option Board to reset the radio.Once the upgrade starts, the radio use will not beable to make or receive calls until the process iscompleted.Advanced Features in Connect Plus Mode275English
Firmware FileFirmware Up to DateNote:If the Option Board firmware file is not Up toDate (and if the radio has partially collected amore recent Option Board firmware fileversion) the radio displays a list with additionaloptions; Version, %Received, and Download.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Info and press to select.4 or to Updates and press to select.5 or to Firmware and press to select.The display shows Firmware is Up to Date.Pending Firmware – Version1 to access the menu.2 or to Utilities and press to select.3 or to Radio Info and press to select.4 or to Updates and press to select.5 or to Firmware and press to select.6 or to Version and press to select.If there is a pending Option Board firmware file,the display shows the pending firmware versionnumber.If there is a pending Option Board firmware file,the display shows Firmware is Up to Date.Pending Firmware – % Received1 to access the menu.2 or to Utilities and press to select.Advanced Features in Connect Plus Mode276English
3 or to Radio Info and press to select.4 or to Updates and press to select.5 or to Firmware and press to select.6 or to %Received and press to select.The screen displays the percentage of firmwarefile packets collected so far.Note:When at 100%, the radio needs to bepower cycled Off and then On to initiate thefirmware upgrade.Pending Firmware – DownloadIf the Connect Plus radio has previously left an OTAOption Board Firmware File Transfer with a partialfile, the unit automatically rejoins the file transfer (ifstill ongoing) when an internal timer expires. If youwant the unit to rejoin an ongoing Option BoardFirmware File transfer prior to expiration of thisinternal timer, use the Download option as describedbelow.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Info and press to select.4 or to Updates and press to select.5 or to Firmware and press to select.6 or to Download and press to select.The display shows the following:Download Available Start DownloadNo Download Availa-bleDownload not availa‐ble7Do one of the following:•Select Yes and press to start the download.•Select No and press to return to theprevious menu.Advanced Features in Connect Plus Mode277English
Frequency FileFrequency File Up to DateNote:If the Frequency File is not Up to Date (and ifthe radio has partially collected a more recentfrequency file version) the radio displays a listwith additional options; Version, %Received,and Download.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Info and press to select.4 or to Frequency and press to select.The display shows Freq. File is Up to Date.Frequency File Pending – Version1 to access the menu.2 or to Utilities and press to select.3 or to Radio Info and press to select.4 or to Updates and press to select.5 or to Frequency and press to select.6 or to Version and press to select.If there is a pending Frequency File, the displayshows the pending Frequency File versionnumber.Frequency File Pending – % Received1 to access the menu.2 or to Utilities and press to select.3 or to Radio Info and press to select.4 or to Updates and press to select.5 or to %Received and press to select.Advanced Features in Connect Plus Mode278English
The screen displays the percentage of frequencyfile packets collected so far.Frequency File Pending – DownloadIf the Connect Plus radio has previously left an OTANetwork Frequency File Transfer with a partial file,the unit automatically rejoins the file transfer (if stillongoing) when an internal timer expires. If you wantthe unit to rejoin an ongoing Network Frequency Filetransfer prior to expiration of this internal timer, usethe Download option as described below.1 to access the menu.2 or to Utilities and press to select.3 or to Radio Info and press to select.4 or to Updates and press to select.5 or to Frequency and press to select.6 or to Download and press to select.Download CurrentlyUnavailableDownload not avail‐ableDownload CurrentlyAvailableStart Download7Do one of the following:•Select Yes and press to start the download.•Select No and press to return to the previousmenu.Advanced Features in Connect Plus Mode279English
AccessoriesAccessories280English
Authorized Accessories ListAntennas• 420 – 445 MHz Stubby Antenna (PMAE4076_)• 438 – 470 MHz Stubby Antenna (PMAE4077_)•403 – 425 MHz Stubby Antenna (PMAE4078_)• 450 – 490 MHz Stubby Antenna Kit (PMAE4091_)• 480 – 527 MHz Stubby Antenna Kit (PMAE4092_)• 806 – 870 MHz Stubby Antenna (PMAF4017_)• 896 – 941 MHz Stubby Antenna (PMAF4018_)• Antenna Mounting Kit, pack of ten screws andplugs (PMLN6040_)Audio Accessories• Surveillance Earpiece with in-line microphone andPTT (PMLN5957_)• Swivel Earpiece with in-line microphone and PTT(PMLN5958_)•Business Wireless Accessory Kit (PMLN6463_)• Mag One Earbud with In-Line Microphone andPush-to-Talk (PMLN7156_)• 2-Wire with Trans Tube, Black (PMLN7157_)• Surveillance Earpiece with In-Line Microphoneand Push-to-Talk (PMLN7158_)• Adjustable D-Style with In-Line Microphone andPush-to-Talk (PMLN7159_)• Swivel Earpiece with In-Line Microphone andPush-to-Talk (PMLN7189_)Batteries• Lithium-Ion 1800 mAh Battery Pack(HKNN4013_).• Lithium-Ion 1370 mAh Battery Pack(PMNN4425_)[7]•Lithium-Ion 2300mAh Battery Pack (PMNN4468_)Bluetooth• HK200 Bluetooth Headset (US) (89409_)• Operations Critical Wireless Earpiece with 12 inchcable (US) (NNTN8125_)•Operations Critical Wireless Earpiece with 9.5 inchcable (US) (NNTN8126_)7Not applicable to the 800/900 band.Authorized Accessories List281English
• Operations Critical Wireless Push-To-Talk POD(US) (NNTN8127_)Cables• Micro USB Programming Cable (PMKN4128_)Carry Devices• Carry Holder (PMLN5956_)• Nylon Wrist Strap (PMLN6074_)•Soft Leather Accessory Carry Case with 1.5-InchQuick Disconnect Swivel Clip (PMLN7040_)Chargers• Multi-Unit Charger, US Plug (PMLN5916_)• Micro USB Charger, US Plug (PMPN4009_)•Micro USB Single-Unit Plug-In Charger(SPN5547_)• SL Series Tri-Unit Charger (PMLN6358_)Miscellaneous Accessories• 1370 mAH Battery Cover (PMLN6000_)• 1800 mAH Battery Cover (PMLN6001_)Authorized Accessories List282English
Batteries and Chargers WarrantyThe Workmanship WarrantyThe workmanship warranty guarantees againstdefects in workmanship under normal use andservice.SL Series Batteries 12 MonthsChargers (Single-Unitand Multi-Unit, Non-Dis-play)12 MonthsThe Capacity WarrantyThe capacity warranty guarantees 80% of the ratedcapacity for the warranty duration.Lithium-Ion (Li-lon) Bat-teries12 MonthsBatteries and Chargers Warranty283English
Limited WarrantyMOTOROLA COMMUNICATION PRODUCTSI. WHAT THIS WARRANTY COVERS AND FORHOW LONG:MOTOROLA SOLUTIONS, INC. (“MOTOROLA”)warrants the MOTOROLA manufacturedCommunication Products listed below (“Product”)against defects in material and workmanship undernormal use and service for a period of time from thedate of purchase as scheduled below:SL Series Digital Porta-ble Radios36 MonthsProduct Accessories (Ex-cluding Batteries andChargers)12 MonthsMOTOROLA, at its option, will at no charge eitherrepair the Product (with new or reconditioned parts),replace it (with a new or reconditioned Product), orrefund the purchase price of the Product during thewarranty period provided it is returned in accordancewith the terms of this warranty. Replaced parts orboards are warranted for the balance of the originalapplicable warranty period. All replaced parts ofProduct shall become the property of MOTOROLA.This express limited warranty is extended byMOTOROLA to the original end user purchaser onlyand is not assignable or transferable to any otherparty. This is the complete warranty for the Productmanufactured by MOTOROLA. MOTOROLAassumes no obligations or liability for additions ormodifications to this warranty unless made in writingand signed by an officer of MOTOROLA.Unless made in a separate agreement betweenMOTOROLA and the original end user purchaser,MOTOROLA does not warrant the installation,maintenance or service of the Product.MOTOROLA cannot be responsible in any way forany ancillary equipment not furnished by MOTOROLAwhich is attached to or used in connection with theProduct, or for operation of the Product with anyancillary equipment, and all such equipment isexpressly excluded from this warranty. Because eachsystem which may use the Product is unique,MOTOROLA disclaims liability for range, coverage, orLimited Warranty284English
operation of the system as a whole under thiswarranty.II. GENERAL PROVISIONS:This warranty sets forth the full extent ofMOTOROLA'S responsibilities regarding the Product.Repair, replacement or refund of the purchase price,at MOTOROLA’s option, is the exclusive remedy.THIS WARRANTY IS GIVEN IN LIEU OF ALLOTHER EXPRESS WARRANTIES. IMPLIEDWARRANTIES, INCLUDING WITHOUT LIMITATION,IMPLIED WARRANTIES OF MERCHANTABILITYAND FITNESS FOR A PARTICULAR PURPOSE,ARE LIMITED TO THE DURATION OF THISLIMITED WARRANTY. IN NO EVENT SHALLMOTOROLA BE LIABLE FOR DAMAGES INEXCESS OF THE PURCHASE PRICE OF THEPRODUCT, FOR ANY LOSS OF USE, LOSS OFTIME, INCONVENIENCE, COMMERCIAL LOSS,LOST PROFITS OR SAVINGS OR OTHERINCIDENTAL, SPECIAL OR CONSEQUENTIALDAMAGES ARISING OUT OF THE USE ORINABILITY TO USE SUCH PRODUCT, TO THEFULL EXTENT SUCH MAY BE DISCLAIMED BYLAW.III. STATE LAW RIGHTS:SOME STATES DO NOT ALLOW THE EXCLUSIONOR LIMITATION OF INCIDENTAL ORCONSEQUENTIAL DAMAGES OR LIMITATION ONHOW LONG AN IMPLIED WARRANTY LASTS, SOTHE ABOVE LIMITATION OR EXCLUSIONS MAYNOT APPLY.This warranty gives specific legal rights, and theremay be other rights which may vary from state tostate.IV. HOW TO GET WARRANTY SERVICE:You must provide proof of purchase (bearing the dateof purchase and Product item serial number) in orderto receive warranty service and, also, deliver or sendthe Product item, transportation and insuranceprepaid, to an authorized warranty service location.Warranty service will be provided by MOTOROLAthrough one of its authorized warranty servicelocations. If you first contact the company which soldyou the Product (e.g., dealer or communicationservice provider), it can facilitate your obtainingwarranty service. You can also call MOTOROLA at1-800-927-2744 US/Canada.Limited Warranty285English
V. WHAT THIS WARRANTY DOES NOTCOVER:1Defects or damage resulting from use of theProduct in other than its normal and customarymanner.2Defects or damage from misuse, accident, water,or neglect.3Defects or damage from improper testing,operation, maintenance, installation, alteration,modification, or adjustment.4Breakage or damage to antennas unless causeddirectly by defects in material workmanship.5A Product subjected to unauthorized Productmodifications, disassembles or repairs (including,without limitation, the addition to the Product ofnon-MOTOROLA supplied equipment) whichadversely affect performance of the Product orinterfere with MOTOROLA's normal warrantyinspection and testing of the Product to verify anywarranty claim.6Product which has had the serial number removedor made illegible.7Rechargeable batteries if:• any of the seals on the battery enclosure ofcells are broken or show evidence oftampering.• the damage or defect is caused by charging orusing the battery in equipment or service otherthan the Product for which it is specified.8Freight costs to the repair depot.9A Product which, due to illegal or unauthorizedalteration of the software/firmware in the Product,does not function in accordance withMOTOROLA’s published specifications or the FCCcertification labeling in effect for the Product at thetime the Product was initially distributed fromMOTOROLA.10 Scratches or other cosmetic damage to Productsurfaces that does not affect the operation of theProduct.11 Normal and customary wear and tear.VI. PATENT AND SOFTWARE PROVISIONS:MOTOROLA will defend, at its own expense, any suitbrought against the end user purchaser to the extentthat it is based on a claim that the Product or partsinfringe a United States patent, and MOTOROLA willpay those costs and damages finally awarded againstLimited Warranty286English
the end user purchaser in any such suit which areattributable to any such claim, but such defense andpayments are conditioned on the following:1that MOTOROLA will be notified promptly inwriting by such purchaser of any notice of suchclaim,2that MOTOROLA will have sole control of thedefense of such suit and all negotiations for itssettlement or compromise, and3should the Product or parts become, or inMOTOROLA’s opinion be likely to become, thesubject of a claim of infringement of a UnitedStates patent, that such purchaser will permitMOTOROLA, at its option and expense, either toprocure for such purchaser the right to continueusing the Product or parts or to replace or modifythe same so that it becomes non-infringing or togrant such purchaser a credit for the Product orparts as depreciated and accept its return. Thedepreciation will be an equal amount per year overthe lifetime of the Product or parts as establishedby MOTOROLA.MOTOROLA will have no liability with respect to anyclaim of patent infringement which is based upon thecombination of the Product or parts furnishedhereunder with software, apparatus or devices notfurnished by MOTOROLA, nor will MOTOROLA haveany liability for the use of ancillary equipment orsoftware not furnished by MOTOROLA which isattached to or used in connection with the Product.The foregoing states the entire liability ofMOTOROLA with respect to infringement of patentsby the Product or any parts thereof.Laws in the United States and other countriespreserve for MOTOROLA certain exclusive rights forcopyrighted MOTOROLA software such as theexclusive rights to reproduce in copies and distributecopies of such MOTOROLA software. MOTOROLAsoftware may be used in only the Product in whichthe software was originally embodied and suchsoftware in such Product may not be replaced,copied, distributed, modified in any way, or used toproduce any derivative thereof. No other useincluding, without limitation, alteration, modification,reproduction, distribution, or reverse engineering ofsuch MOTOROLA software or exercise of rights insuch MOTOROLA software is permitted. No license isgranted by implication, estoppel or otherwise underMOTOROLA patent rights or copyrights.Limited Warranty287English
VII. GOVERNING LAW:This Warranty is governed by the laws of the State ofIllinois, U.S.A.Limited Warranty288English
BackCover_HalfLetter_P299C.fm Page 1 Friday, July 5, 2013 2:40 PM
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2013–2015 Motorola Solutions, Inc. All rights reserved.Wi-Fi® is a registered trademark of Wi-Fi Alliance®. November 2015www.motorolasolutions.com/mototrbo*68009554001*68009554001-LCBackCover_HalfLetter_P299C.fm Page 2 Friday, July 5, 2013 2:40 PM

Navigation menu