Motorola Solutions 89FT7020 NNTN6402A, DONGLE/CONTROLLER User Manual Wireless Wheels

Motorola Solutions, Inc. NNTN6402A, DONGLE/CONTROLLER Wireless Wheels

USERS MANUAL

Wireless Wheels User’s Guide@NNTN6704A@NNTN6704ADRAFT
iContentsSafety and General Information ............... iiElectromagnetic Interference/Compatibility.......iiIndustry Canada Notice to Users ..................... iiiFCC Notice to Users ........................................ iiiGetting Started........................................... 1Package Contents.............................................2Battery Requirements........................................2Customer Service..............................................3Technical Support .............................................3Running the Wireless Wheels Java Application 6        Battery Installation.....................................9Joystick Controller.............................................9Vehicle ..............................................................9Motorola Wireless Remote Control Adapter Installation ..............................11Operating Your Vehicle............................15Using The Joystick Controller .........................15Adjusting Steering Alignment ..........................19Patent and Trademark Information.........20Index..........................................................21
 iiSafety and General InformationProduct Name:  Wireless WheelsKit Number NASCAR: NNTN6401AKit Number Maserati: NNTN6402AIMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR DEVICE.Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. See 47 CFR Sec. 15.21.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See 47 CFR Sec. 15.19(3).Electromagnetic Interference/CompatibilityNote: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise configured for electromagnetic compatibility.FacilitiesTo avoid electromagnetic interference and/or compatibility conflicts, turn off your device in any facility where postednotices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy.AircraftWhen instructed to do so, turn off your device when on board an aircraft. Any use of a device must be in accordance with applicable regulations per airline crew instructions.Medical DevicesHearing AidsSome devices may interfere with some hearing aids. In the event of such interference, you may want to consult with your hearing aid manufacturer to discuss alternatives.
 iiiOther Medical DevicesIf you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information.Industry Canada Notice to UsersOperation is subject to the following two conditions: (1) This device may not cause interference and (2) This device must accept any interference, including interference that may cause undesired operation of the device Ref IC RSS 210 Sec. 5.11. The term “IC:” before the certification/registration number only signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment. See Ref IC Self-Marking 6(f) and RSP-100 Sec. 4.FCC Notice to UsersThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and the receiver.•Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.
1Getting StartedRecommended:For ages 6 and up.•Custom Car Name•You can assign your car a unique name so it stands out on the Car Select List.•Long Distance Control•Car and Transmitter have a range of up to 100 feet* which is double the range of traditional RC cars!
2Getting StartedPackage ContentsYour Wireless Wheels R/C car package contains the following:•1-9V battery•4-AA alkaline batteries(1.5V)•Wireless Wheels remote control car•Wireless Wheels joystick controller•Motorola Wireless Remote Control AdapterBattery Requirements•Vehicle : 4 x AA alkaline(1.5V)•Transmitter : 1 x 9V battery
3 Customer ServiceCustomer ServiceFor customer service, contact Nikko Customer Service toll-free at 1-800-736-4556.Additional information can be found on the Nikko America web site at: http://www.nikkoamerica.com Technical SupportFor technical support, contact Nikko Technical Support toll-free at 1-800-736-4556. Before you call, make a note of the exact problems and error messages you encountered.Additional information can be found on the Nikko America web site at: http://www.nikkoamerica.com
9Battery InstallationJoystick ControllerInstall batteries making sure that the + and - poles of the batteries are positioned accurately.•Make sure vehicle's on-off switch is turned OFF when installing batteries.Note: Do not use Ni-Cd batteries.To Open the Battery Compartment Lid1Press and slide off the battery compartment lid.Vehicle•Make sure vehicle's on-off switch is turned OFF when installing batteries.•Avoid combined use of new dry batterries and old ones.Note: Do not use Ni-Cd batteries.To Open the Battery Compartment Lid1Use coin to turn the battery lid stopper to the OPEN position.2Slide the battery compartment lid forward a little, applying pressure on to the latch.Battery Lid9V BatteryBattery CompartmentBattery lid stopperSteering alignment lever
10Battery Installation3Then, the battery compartment lid can be pulled and open. Steering alignment lever4 AA alkaline (1.5V) ON/OFF switch
12Motorola Wireless Remote Control Adapter InstallationAttaching the Motorola Wireless Remote Control Adapter to your Joystick ControllerYour Wireless Wheels package contains a Motorola Wireless Remote Control Adapter.1Locate the accessory connector on your joystick controller. 2Plug the end of the Motorola Wireless Remote Control Adapter into the accessory connector. 3The joystick controller will automatically connect to an available car when one or more cars are turned on and not controlled by other users. The system will search for the last car that was controlled by the Motorola Wireless Remote Control Adapter.  If the last car that was controlled is found, it will immediately connect to it.  Otherwise, it will connect to the available car with the strongest radio signal.  Tip: To remove the Motorola Wireless Remote Control Adapter from the accessory connector: Press the buttons on the sides of the Adapter. Pull the Adapter straight out.accessory connectorMotorola Wireless Remote Control AdapterLED Status Indicatoraccessory connectorMotorola Wireless Remote Control Adapter
13Wireless Remote Control Adapter Status IndicatorThe wireless remote control adapter has a green light emitting diode (LED) to let you know what it is doing. The blinking pattern will let the user know when the car is ready to drive. The status LED blink pattern will blink a pattern of short (0.1 second) on-off blinks and then turn off the LED for one second and then repeat the blink pattern again. When you first connect the wireless remote control adapter, it will blink one time to indicate that it is powered by the joystick controller.Next the status indicator will blink two times to indicate that it is trying to connect to a car.The normal operation for driving a car is called the connected state would be a three blink pattern.  It would be three 0.1 sec LED light flashes then no flashes for one second and then it would repeat the pattern.The value below is the number of blinks in each pattern.Value State Description1 Blink Standby Power saving - Not controlling the RC car2 Blinks Discoverable or Discovery RC car or wireless remote control adapter is looking for each other3 Blinks Connected The wireless remote control adapter or joystick controller is controlling an RC car
14Motorola Wireless Remote Control Adapter Installation4 Blinks Disconnected The wireless remote control adapter or Joystick controller was controlling a RC car but has lost the signal.5 Blinks Scan The RC car is looking for a clear channel to begin operation. This state is not used all that often and will rarely be noticed.
15Operating Your VehicleUsing The Joystick Controller1Turn ON the vehicle.2Attach the Motorola Wireless Remote Control Adapter to the joystick controller. A blinking LED indicates that the Motorola Wireless Remote Control Adapter is working. See “Wireless Remote Control Adapter Status Indicator” on page 13.Note: The Motorola Wireless Remote Control Adapter will connect to the last car driven, if present. Otherwise, it will connect to the car with the strongest signal at the time.3Operate the vehicle with joystick controller.4Turn OFF the vehicle after operating.5Detach the Motorola Wireless Remote Control Adapter from the joystick controller when not in use to conserve battery life.Important:  Please follow the above sequence of operation. Powering the Joystick Controller On and OffThe transmitter is powered ON automatically when the Motorola Wireless Remote Control Adapter is attached. See “Attaching the Motorola Wireless Remote Control Adapter to your Joystick Controller” on page 12. ForwardNeutralReverseSteering control stickLEFT/STRAIGHT/RIGHTSpeed control stickR/C Accessory slot
19 Adjusting Steering AlignmentAdjusting Steering AlignmentTo Adjust Steering AlignmentAdjust the steering alignment lever on the underside of the vehicle when the vehicle doesn't  run straight forward.
20Patent and Trademark InformationMOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. © 2005 Motorola, Inc. All rights reserved. Microsoft and Microsoft Internet Explorer are registered trademarks of Microsoft Corporation.T9 is a trademark owned by Tegic Communications.T9® Text Input Patent and Trademark InformationThis product is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other patents pending.All other product names or services mentioned in this manual are the property of their respective trademark owners.Software Copyright NoticeThe Motorola products described in this manual may include copyrighted Motorola and third party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the Motorola products may not be modified, reverse-engineered, distributed, or reproduced in any manner to the extent allowed by law. Furthermore, the purchase of the Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Motorola or any third party software provider, except for the normal, non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product.

Navigation menu