Motorola Solutions 89FT7008 Handheld data terminal w/GPRS & Bluetooth radios User Manual E PowerPad owners

Motorola Solutions, Inc. Handheld data terminal w/GPRS & Bluetooth radios E PowerPad owners

Contents

Owners Manual

Owner’s ManualEnhancedPowerPadHandheldDataTerminal6802970C30-B@6802970C30@a
iCOMPUTER SOFTWARE COPYRIGHTSThe Motorola products described in this instruction manual may include copyrighted Motor-ola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copy-righted computer programs, including the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer pro-grams contained In the Motorola products described in this instruction manual may not be copied or reproduced in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel. or otherwise. any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive, royalty free license to use that arises by operation of law in the sale of a product.EPS – 34440- BThis warranty applies within the fifty (50) United States, the District of Columbia and Can-ada.Document CopyrightsNo duplication or distribution of this document or any portion thereof shall take place with-out the express written permission of Motorola. No part of this manual may be reproduced, distributed, or transmitted in any form or by any means, electronic or mechanical, for any purpose without the express written permission of Motorola.DisclaimerThe information in this document is carefully examined, and is believed to be entirely reli-able. However, no responsibility is assumed for inaccuracies.Furthermore, Motorola reserves the right to make changes to any products herein to improve readability, function, or design. Motorola does not assume any liability arising out of the applications or use of any product or circuit described herein; nor does it cover any license under its patent rights nor the rights of others.
iiCommercial WarrantyLimited WarrantyMOTOROLA COMMUNICATION PRODUCTSI. What This Warranty Covers And For How LongMOTOROLA INC. (“MOTOROLA”) warrants the MOTOROLA manufactured Communication Products listed below (“Product”) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below:Motorola, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Product shall become the property of MOTOROLA.This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product.MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equip-ment, and all such equipment is expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole under this warranty.II. General ProvisionsThis warranty sets forth the full extent of MOTOROLA’s responsibilities regarding the Product. Repair, replace-ment or refund of the purchase price, at MOTOROLA’s option, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR-POSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL MOTOR-OLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABIL-ITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW.III. State Law RightsSOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY.This warranty gives specific legal rights, and there may be other rights which may vary from state to state.IV. How To Get Warranty ServiceYou must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by Motorola through one of its authorized PowerPad units One (1) YearProduct Accessories One (1) Year
iiiwarranty service locations. If you first contact the company which sold you the Product, it can facilitate your obtaining warranty service. You can also call Motorola at 1-888-567-7347 US/Canada.V. What This Warranty Does Not CoverA. Defects or damage resulting from use of the Product in other than its normal and customary manner.B. Defects or damage from misuse, accident, water, or neglect.C. Defects or damage from improper testing, operation, maintenance, installation, alteration, mod-ification, or adjustment.D. Breakage or damage to antennas unless caused directly by defects in material workmanship.E. A Product subjected to unauthorized Product modifications, disassemblies or repairs (including, without limitation, the addition to the Product of non-Motorola supplied equipment) which adversely affect performance of the Product or interfere with Motorola's normal warranty inspection and testing of the Product to verify any warranty claim.F. Product which has had the serial number removed or made illegible.G. Rechargeable batteries if:•any of the seals on the battery enclosure of cells are broken or show evidence of tampering.•the damage or defect is caused by charging or using the battery in equipment or service other than the Product for which it is specified.H. Freight costs to the repair depot.I. A Product which, due to illegal or unauthorized alteration of the software/firmware in the Product, does not function in accordance with MOTOROLA’s published specifications or the FCC type acceptance labeling in effect for the Product at the time the Product was initially distributed from MOTOROLA.J. Scratches or other cosmetic damage to Product surfaces that does not affect the operation of the Product.K. Normal and customary wear and tear.VI. Patent And Software ProvisionsMOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and MOTOROLA will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:A. that MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim;B. that MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise; andC. should the Product or parts become, or in MOTOROLA’s opinion be likely to become, the sub-ject of a claim of infringement of a United States patent, that such purchaser will permit MOTOROLA, at its option and expense, either to procure for such purchaser the right to con-tinue using the Product or parts or to replace or modify the same so that it becomes nonin-fringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA.MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the com-bination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or used in connection with the Product. The foregoing states the entire lia-bility of MOTOROLA with respect to infringement of patents by the Product or any parts thereof.Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software such as the exclusive rights to reproduce in copies and distribute copies of such Motorola software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to pro-duce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, dis-
ivtribution, or reverse engineering of such MOTOROLA software or exercise of rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights.VII. Governing LawThis Warranty is governed by the laws of the State of Illinois, USA.EPS – 48759 – OFCC INTERFERENCE WARNINGThe FCC requires that manuals pertaining to Class A and Class B computing devices must contain warnings about possible interference with local residential radio and TV reception. This warning reads as follows:NOTE: This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial or residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accor-dance with the instruction manual, may cause harmful interference to radio commu-nications.This device complies with Part 15 of the FCC Rules. Operation is subject to the fol-lowing two conditions: (1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference that may cause undesired operation. FCC Grant of Equipment AuthorizationFor detailed product safety and RF exposure refer to Safety and General Informa-tion leaflet, Motorola publication Number 6802970C29.Caution: Changes or modifications made in the radio terminal, not expressly approved by Motorola, will void the user's authority to operate the equipment.TrademarksMotorola and the Motorola stylized M logo are registered trademarks of Motorola, Inc. FlashFile is a registed trademark of Intel Corporation. CompactFlash is a registed trademark of SanDisk Corporation.Microsoft and PocketPC 2003 are registered trademarks of Microsoft Corporation.The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license in the U.S.and other countries.All other product or service names are the property of their respective owners.Radio Network Freq Band Rated Power GPRS W-WAN 824.2-848MHz / 1850.2-1909.8MHz 0.6W / 1WBluetooth W-PAN 2402 - 2480MHz 1.15 mW
Commercial, Government and Industrial Solutions Sector1301 E. Algonquin Road, Schaumburg, IL 6019668P02970C30-BNovember, 2003© Motorola Inc., 2003ContentsCOMPUTER SOFTWARE COPYRIGHTS............... iDocument Copyrights..............................................  iDisclaimer ...............................................................  iCommercial Warranty ............................................  iiFCC INTERFERENCE WARNING .......................  ivIntroduction ............................................................  1What is the PowerPad Terminal .............................  1Unpacking ..............................................................  3Charging the Battery ..............................................  6Battery Installation and Removal ........................... 6The Universal Office Dock (UOD) Unit................... 7First Time Battery Charge ...................................... 8Routine Battery Charge.......................................... 9Battery Maintenance .............................................. 9Battery Storage ...................................................... 9Extending Battery Life .......................................... 10Using the PowerPad ............................................. 11Turning On the PowerPad....................................  11Turning Off the PowerPad....................................  11Suspend Mode.....................................................  11LED Indicator Function.........................................  11Using the Stylus Pen............................................ 12Using the Keyboard.............................................. 13Key Assignment.......................................................  13Action Keys ............................................................. 14Scanning with the PowerPad ............................... 15
viResetting the PowerPad......................................  16Maintaining the PowerPad....................................  17Accessories ..........................................................  18Troubleshooting ...................................................  19Safety Instructions ................................................  21PowerPad On-board Aircraft ...............................  21Battery Disposal ..................................................  21Laser Safety ........................................................  21Battery Warnings and Disposal ...........................  21To Prevent Injury Or Burns ..................................  22SPECIFICATIONS................................................  23
1IntroductionMotorola congratulates you on your purchase of the Enhanced PowerPad Handheld Data Terminal!  Its unique functionality and features make this state-of-the-art ruggedized Personal Digital Assistant (PDA) superior for use in a wide range of applications.Note that in this manual the Enhanced PowerPad is also referred to as PowerPad.This manual covers the basic setup operations and use of the Pow-erPad terminal. Since your PowerPad applications are designed by your company or organization, this manual does not cover any of the software applications resident in your PowerPad. For software applications description, refer to the specific application manual or contact your company or organization representative for instruc-tions. The PowerPad network communication and power charge is through a Universal Office Dock (UOD) unit. Note that this man-ual briefly mentions the UOD. For detailed installation and opera-tion of the UOD, refer to UOD User Manual,Motorola P.N. 98-08901C59.What is the PowerPad TerminalThe PowerPad handheld data terminal is a ruggedized device, designed for field applications where fast data acquisition is required.The PowerPad carries the functionality of a state-of-the-art Per-sonal Digital Assistant (PDA) that enables portable access to mobile applications, such as mobile messaging, queries and Com-puter Aided Dispatch.It contains a variety of options, including built-in barcode scanner (for 1D and 2D labels), Bluetooth® and General Packet Radio Ser-
2vice (GPRS) radios, all with internal antennas for increased rugge-dization. The 3.5” color touch screen with illumination enables easy access to various applications and signature capture in all light conditions. The IrDA port serves for data exchange between the PowerPad and data network using the Universal Office Dock (UOD) unit.The PocketPC 2003®-based operating system supports multimedia and audio applications, using a built-in microphone, speaker and buzzer. A removable CompactFlash (accessed only by service) is used for memory expansion and operating system updates.The PowerPad is powered by a 7.2V 1800 mAh Lithium-Ion bat-tery pack that supports 12 hours of typical operation. The battery is fully recharged within three hours, using the UOD unit.
3UnpackingThe PowerPad package includes the following items:• One PowerPad unit• One 7.2V 1800 mAh Li-ion battery pack• One Stylus pen• This Owner’s Manual• Safety and General Information leaflet, Motorola P.N., 6802970C29Carefully unpack each item from the shipping carton. Check all items for shipping damage, and check that you have received all items ordered. If there is damage or missing items, retain the ship-ping carton for inspection.The battery is shipped from factory uncharged and not installed. Charge the battery fully for 24 hours before using the PowerPad for the first time.The PowerPad is shipped with a plastic film, protecting the screen. Before usage, remove the film and use a soft cloth to buff the dis-play. This ensures smooth gliding of the Stylus pen over the sur-face.
4PowerPad Parts LED Indicator (see page 11)Barcode Scanner Key(see page 15)Touch Sensitive Screen SpeakerPower Button (On/Off/Suspend)(see page 11)MicrophoneNavigation Key Panel (see page 13)Numeric Keys(see page 13)Alphabet Keys(see page 13)Figure 1. PowerPad -  Front ViewNote that the gray and blue colors in picture are for illustration clarity purposes only and do not reflect the actual color of the unit.
5Docking ContactsBattery(see page 6)Battery Release Button(see page 6)BuzzerIrDA Communication WindowBattery Release ButtonFigure 2. PowerPad -  Back ViewBarcode Scanner LASER Window (see page 15)
6Charging the BatteryThe battery is shipped from the fac-tory uncharged and not installed. Charge the battery before using the PowerPad for the first time.Battery Installation and Removal Important Note: The PowerPad enables you to replace batteries with-out losing information stored in its memory. To avoid losing information stored in the memory, a charged bat-tery must be installed within 8 hours after removing the empty battery. Do not remove battery while the LED indicator of the PowerPad   shows red.To install the battery:1. Insert the battery, bottom end first, into the battery compart-ment (see Figure 3).2. Carefully press the battery top downward until it clicks into place. When PowerPad is pow-ered by battery installation for the first time, see note in “Turn-ing On the PowerPad” on page 11. To remove the battery:1. Turn the PowerPad off by holding the Power button pressed (see Figure 1), for at least four seconds.2. Press the Release Buttons on the battery sides (see Figure 3) and pull the away battery from the PowerPad.Figure 3. Battery Installation and RemovalRelease Buttons
7The Universal Office Dock (UOD) UnitThe UOD unit is used for charging the PowerPad battery and com-municating with the PowerPad through an IrDA port. Each UOD unit has nine slots. Each slot may accommodate either a PowerPad with a battery attached, or a battery (stand-alone). Each of the nine slots has a status LED with an associated number. The  LEDs are laid out in the same order as the slots. When a slot is empty, its cor-responding LED is Off. When a battery or a PowerPad with a bat-tery is inserted to a slot, the slot LED turns On, indicating the battery charge (see Table 1). The battery power can also be tested by pressing the battery power TEST button (see Figure 5).Universal Office Dock (UOD) UnitUOD status LEDBattery ChargePowerPad charged with battery installedSlot LEDsFigure 4. Universal Office Dock (UOD) Unit
8 First Time Battery ChargeThe first time battery charge ensures maximum start capacity for the battery. Charge your new battery for at least 24 continuous hours before using it or until the LED indicator of the UOD shows green. During the charge, the LED indicator of the PowerPad shows green and blinks quickly. The UOD charges your battery effectively when it is at room temperature [approx. 68°F (20° C)]. Battery charging temperature range is 32°F to 113°F (0°C to 45°C). Table 1: Status of a UOD Slot LED During Battery ChargeSlot LED Status  IndicationNo Light No device inserted.Blinking Amber Battery temperature out of tolerance and charging has been temporarily stopped.Solid Amber PowerPad Battery is being charged.Solid Green PowerPad Battery is at least 90% charged after 2.5 hours and fully charged after 3.Solid Red PowerPad Battery is not fully charged after 3 hours of charging, and is consid-ered failed.
9To test the power capacity of the battery; press the TEST pad on back side of the battery and view the power level indicator.Routine Battery ChargeA battery is charged to 90% of its full capacity after approximately two and a half hours, and is fully charged after three hours, excluding out-of-range periods. During the charge, the LED indi-cator of the PowerPad shows green and blinks quickly. Note that the PowerPad can be in either On, Off or Suspend mode while charging.Important: The battery will not charge if the PowerPad or battery is not properly locked inside the UOD slot.Battery MaintenanceThe performance of the rechargeable battery delivered with your PowerPad depends on the way the battery is treated. Therefore, to comply with the Motorola warranty for batteries and to assure high performance and a long life for your Motorola rechargeable battery, please read and follow the maintenance rules stated below.Battery StorageDo not store your battery where the temperatures exceed 140°F (60°C) or fall below 4°F (-20°C).New Lithium-Ion batteries (i.e. batteries that have never been charged before) may be stored for up to 3 months in well-venti-lated, cool and dry areas without significant loss in lifespan.100Figure 5. Battery Power TestBattery TEST PadPower Level Indicator
10Batteries which have already been charged and then stored for more than 2 months should be recharged before use.Extending Battery LifeA battery is an expendable part and may need replacing during the life of the PowerPad. To ensure maximum service life of your Pow-erPad, always replace the battery with a genuine Motorola replace-ment.Your UOD will charge your battery effectively when it is at room temperature [approx. 68°F (20° C)]. Battery charging temperature range is 32°F to 113°F (0°C to 45°C).
11Using the PowerPadTurning On the PowerPad Press the Power button to turn On the PowerPad (see Figure 7) - when turned On, the last displayed screen will be shown again.Note: The PowerPad powers On immediately when the battery is installed for the first time or after Cold Reset (see page 16) - the Motorola logo will show for about 30 seconds and you will be required to follow on-screen alignment (calibration) instructions.Turning Off the PowerPadWhen the PowerPad is On, hold the Power button pressed (see Fig-ure 7) for at least four seconds.When the battery is removed (see “Battery Installation and Removal”) from the PowerPad during operation, the PowerPad turns off automatically. To resume operation, press the Power but-ton. Suspend ModeWhen the PowerPad is On, press the Power button (see Figure 7) to enter Suspend mode. During Suspend mode the display turns off and the LED indicator slowly blinks green. To resume operation, press the Power button again.In Suspend mode, battery power is saved by turning off the display and computer sections of the PowerPad. During Suspend mode, the GPRS and Bluetooth radios continue to operate. When the Power-Pad resumes operation, it returns to the screen shown prior to Sus-pend mode. Use Suspend mode as often as possible to save battery power.LED Indicator FunctionLED shows red - do not remove battery.
12LED slowly blinks green - PowerPad in Suspend mode.LED quickly blinks green - PowerPad is charged in UOD unit.Using the Stylus PenThe Stylus pen selects items and enters information. Use the pen as you use your PC mouse.• To open and select screen items, tap on the item with the pen.• To drag text or image items, hold the pen on the item and drag across the screen. • To see a list of actions avail-able for a specific item, tap-and-hold the pen on an item. When the pop-up menu appears, tap the action you want to perform.Figure 6. Using the Stylus Pen
13Using the KeyboardKey AssignmentFigure 7 describes the PowerPad keyboard.Note: Key assignment may vary by application. Therefore, your keyboard may not function as described. Power Button• Hold pressed for 4 sec toturn Off• When On, press to  Sus-pend• When Off or in Suspend mode, press to turn OnBarcode Scan Key Up KeyHelp Key (numeric mode)Clear Screen Key(alpha mode) or All (numeric mode)Numeric KeysAlpha KeysDown KeySHIFT Key• Press to toggle between alpha and numeric modes• In Alpha mode, press to produce capital letters• Hold pressed for 2 sec to turn screen illumination On/Off Blank Space Key• Blank Space (alpha mode)• Erase (numeric mode)Figure 7. PowerPad - Key Function
14Action KeysTable 2 describes the action keys combinations.Table 2: Action Keys CombinationsAction Key CombinationWarm Reset (see also “Resetting the PowerPad”) H + CLR + GO Lower Case to Upper Case Let-ters (default is lower case)SHIFT + any alphabet key Audio Recording  SHIFT + SP + R Audio Volume Increase: SHIFT +SP + UPDecrease: SHIFT + SP + DOWNTouch Screen Calibration  SHIFT + SP + CDisplay Illumination Intensity Increase: SHIFT + UPDecrease: SHIFT + DOWNKeyboard Back light Intensity Increase: SHIFT + PAGE UPDecrease: SHIFT + PAGE DOWNVirtual Keyboard Open/Close: SHIFT + SCAN + SP PocketPC 2003 Menu SP + SCAN
15Scanning with the PowerPadThe PowerPad has an inte-grated Laser scanner which gathers data by scanning barcodes. The PowerPad is equipped with a SCAN trigger button, designed for both left-handed and right-handed users (see Figure 8). The button is located at the center of the terminal navigation key panel.To scan 1D (one dimen-sional) barcodes; aim the scanner at the barcode and press the SCAN trigger button (see Figure 8). To scan 2D barcodes; aim the scanner at the barcode top, press the SCAN trigger button and move the beam vertically down on the bar-code (see Figure 8). Ensure that the red scan beam cov-ers the entire barcode area.  A beep sound indicates a successful decode. LASER LIGHT DO NOT STARE INTO BEAMCLASS 2 LASER PRODUCT LUMIERE LASER NE PAS REGARDER LE RAYON FIXEMENT PRODUIT LASER DE CLASSE 2 18° Scan AngleSCAN Trigger ButtonFigure 8. Scanning with the PowerPad1D Barcode Scanning2D Barcode Scanning
16Resetting the PowerPadYou may need to reset your Pow-erPad; for example, you may reset due to communication cut-off, or if the operating system stops responding. If your PowerPad stops respond-ing, do the following actions:Warm ResetImportant Note: When the PowerPad is warm reset, all recorded information remains stored in memory.Simultaneously, press keys H + CLR + GO (see Figure 9); the PowerPad will function again. If your PowerPad still does not respond, perform “Cold Reset”:Figure 9. Warm Reset
17Cold ResetCold reset restarts the PowerPad by erasing all stored records and entries.Do Not perform Cold reset unless Warm reset  fails to solve your problem. Cold reset is per-formed by removing the battery and insert-ing the Stylus tip into the hole located on the back side of the Power-Pad (see Figure 10).Maintaining the PowerPadIn order to maintain your PowerPad in good working order:• Do not scratch the screen. Use only Motorola supplied stylus pen with the touch screen.• Never use a pen or pencil or any sharp object on the screen.• Although your PowerPad is water and dust resistant, do not expose it to rain or moisture for long periods of time.• Protect your PowerPad from temperature extremes. Do not leave the PowerPad on the dashboard of a car on a hot day, and keep the PowerPad away from hot places.• Do not drop your PowerPad or subject it to strong impact.• Do not store or use your PowerPad in any location that is extremely dusty, damp or wet. For Cold Reset: insert the Stylus tip into the hole Figure 10. Cold ResetReset hole
18• If the battery contacts, screen or surface of the PowerPad become dirty, use a soft lint free cloth moistened with diluted Isopropyl Alcohol (IPA) solution to remove dirt. The Isopropyl Alcohol (IPA) can be diluted with water up to 20%.AccessoriesThe following Motorola approved accessories are for use with your terminal. It is the responsibility of the user to use only the approved accesso-ries supplied for this product, as detailed in Table 3 . Motorola is not responsible for the use of accessories not approved for this product.For more information on the availability of these accessories, please call your company supplier.Table 3: AccessoriesMotorola Approved Accessory Part NumberBattery FTN6032Stylus FLN9805Holster FHN6498
19Troubleshooting Table 4: Troubleshooting the PowerPadProblem Cause SolutionPowerPad does not turn OnBattery is not installed properly or  not chargedEnsure proper battery instal-lation in PowerPad.Charge or replace the batteryPowerPad in Sus-pend modePress the Power Button Battery does not charge in UODPowerPad is not locked in UODReinstall PowerPad in UOD.  Lock the PowerPad properly in UOD. (See that the UOD LED is On and charge for three hours)PowerPad or UOD Dock contacts are not cleanClean contacts and remove dust and objects from within the UODBattery tempera-ture is out of rangeEnsure that the battery  tem-perature range is 32°F to 113°F (0°C to 45°C)Bad battery Replace batteryPowerPad does not detect scan inputLASER beam does not cover the entire barcode symbolScan again and make sure that the entire barcode sym-bol is coveredUnreadable bar-codeBe sure the barcode symbol is not covered or damaged
20PowerPad does not respondProblem in Power-Pad operating sys-tem or communication networkExecute Warm reset by simultaneously pressing soft keys H+CLR+GO for at least one second; the PowerPad should function againIf PowerPad still does not respond, perform Cold rest (see “Resetting the Power-Pad” on page 16). The opera-tion system will reboot after about 30 secondsIncomplete or no data trans-mission between Pow-erPad and UODCommunication software was incor-rectly installed or configuredRefer to the UOD user man-ual or see your system administratorIrDA communica-tion window is obscuredMake sure that the IrDA win-dow of the PowerPad is clean and has a clear line of sight with the IrDA window of the UODTable 4: Troubleshooting the PowerPadProblem Cause Solution
21Safety Instructions• DANGER - LASER LIGHT WHEN OPEN, AVOID DIRECT EYE EXPOSURE• CAUTION - LASER LIGHT - DO NOT STARE INTO BEAM• CLASS II LASER PRODUCT, 650 nm LASER, 0.9 mW MAX. OUTPUT, COMPLIES WITH 21 CFR 1040.10 & 1040.11, IEC60825-1:1993 + A1:1997 + A2: 2001• Do not aim the beam at a human eye• Press the "SCAN" button only when the aperture is aimed at the barcode• CAUTION - Use of controls or adjustments or performance of procedures other than those specified herein may result in haz-ardous radiation exposure PowerPad On-board AircraftAlways remove the battery from the PowerPad when shipped via air. Any use of the PowerPad must be in accordance with applica-ble regulations per airline crew instructions.Battery DisposalBatteries must be recycled or disposed of properly in accordance with local requirements. Recycling facilities may not exist in all areas. Please contact your local environmental agency for more information regarding proper disposal.Laser SafetyBattery Warnings and Disposal
22To Prevent Injury Or Burns• USE ONLY SPECIFIED BATTERIES AND CHARGERS.• DO NOT DISPOSE OF ANY BATTERIES IN FIRE, AS THEY MAY EXPLODE!• DO NOT PUNCTURE OR ALLOW METAL TO CONTACT THE BATTERY TERMINALS.• DO NOT DISPOSE OF IN WATER.• DO NOT DISASSEMBLE.• DO NOT STORE ABOVE 140°F (60°C) OR BELOW 4°F(-20°C)
23SPECIFICATIONSPHYSICAL SPECIFICATIONSWeight 23.5 ± 0.3oz (666 ± 10g)Dimensions Width x Length x Depth: 4.1 x 8 x 1.9“ (104 x 202 x 48 mm) ELECTRICAL SPECIFICATIONSProcessor type Intel SA1110 running at 206MHzMemory Flash: 32 MB, SDRAM: 64 MBNon-Volatile Memory Compact Flash 128 MB Display  3.5” color, transflective, native portrait LCD with illumination. Resolution: 240 x 320 pixels (1/4 VGA) Viewing angle ± 35° in both X and Y axis. Viewing area smaller by about 2 mm all aroundTouch Screen  65,000 signatures (<1% linearity change)65,000 to 85,000 signatures (<4% lin-earity change) Operating force < 100 grams with sty-lusKeyboard  39 keys: 8 Navigation keys, Scan key, 28 alphanumeric keys and Power On/Off key. Software controlled backlight-ing (On/Off only)Status Indicator  Tricolor LED, Software controlled
24Audio Microphone: For Mono sound record-ingSpeaker: Mono (Bluetooth audio support as a remote microphone and speaker)Beeper: Piezo buzzer with adjustable tones, maximum sound level is 85 db for audio notification of proper scansPersonal Area Network (PAN)Bluetooth RF communication to wire-less phones and accessoriesBarcode Scanner 2D high-speed LASER (manual scan) support for common barcode symbolo-gies including PDF417Main Battery  Lithium-Ion, 7.2V, 1800 mAh support-ing 12 hours typical operation. Fully recharged  within 3 hours in  UOD.Backup Battery Rechargeable Lithium coin cell, 90 mAh for 8 hours retention of real-time clock and DRAM memorySOFTWAREOperating System  PocketPC 2003Program Loader  Via IrDA port or Bluetooth radioPower Management As supported by PocketPC 2003: On, Idle, Hibernate, Docked (2), Battery Out
25CommunicationPersonal Area Network (PAN): Blue-tooth RF communication to wireless phones and accessoriesWireless Wide Area Network (WWAN): Data-only GPRS compati-ble dual-band for USA (850 MHz & 1900 MHz)Infra-red (IrDA): supporting SIR 9.6K/bits to 115.2 kbit/s and FIR 4 Mbit/s data rates. All PocketPC 2003 IR lay-ers
Index - 1IndexNumerics2D barcodes 15AAccessories 18Action Keys 14Aircraft 21Alpha Keys 13Alphabet Keys 4Audio Recording 14Audio Volume 14BBack light Intensity 14Barcode Scan Key 13Battery Charge 8Battery charging temperature 8battery contacts 18Battery Maintenance 9Battery Power Test 9Battery Storage 9Battery Warnings 21beep sound 15Blank Space Key 13Blinking Amber 8CCharging 6Clean 18Clear Screen Key 13Cold Rese 17cool and dry areas 9DDisposal 21Down Key 13EExtending Battery Life 10HHelp Key 13Holster 18IIllumination Intensity 14Injury 22Install Battery 6Isopropyl Alcohol 18KKeys Assignment 13LLaser Warning 15LED blinks fast 9LED Indicator 11LED shows green 9LED shows red 11Lithium-Ion 2MMaintaining 17Microphone 4NNavigation Key Panel 4Numeric Keys 4
2 - IndexPPocketPC 2003 Menu 14Power Button 13Power Level Indicator 9PowerPad Parts 4RRemove Battery 6Reset hole 17Resetting 16resume operation 11room temperature 8SSafety 3Safety Instructions 21scan 1D 15Scan Angle 15SCAN trigger 15Scanning 15Screen Calibration 14SHIFT Key 13Slot LEDs 7Solid Amber 8Solid Green 8Solid Red 8Speaker 4storage temperatures 9store 17Suspend Mode 11TTEST pad 9Touch Sensitive Screen 4Troubleshooting 19Turning Off 11Turning On 11UUniversal Office Docking 7Unpacking 3UOD User Manual 1Up Key 13VVirtual Keyboard 14WWarm Reset 16
HOW TO REACH US:Commercial, Government and Industrial Solutions Sector1301 E. Algonquin Road, Schaumburg, IL 60196Tel: 1-888-567-7347 (inside the US)Tel: 1-847-576-5000 (outside the US)Visit our Web site atwww.motorola.comMOTOROLA and the Stylized M Logo are regis-tered in the U.S. Patent and Trademark Office. All other product or service names are the prop-erty of their respective owners.© Motorola, Inc. 2003.

Navigation menu