Motorola Solutions 89FT4931 Handheld Portable UHF Non-Display fixed antenna User Manual 12000084 CLP fr CA

Motorola Solutions, Inc. Handheld Portable UHF Non-Display fixed antenna 12000084 CLP fr CA

User Manual - Part 1

            Model CLP1013, CLP1043, and CLP1063 (with Bluetooth® Wireless Technology)Modèles CLP1013, CLP1043 et CLP1063 (avec technologie sans fil BluetoothMC)User GuideCLP Series Two-Way RadioTMGuide d’utilisationRadio bidirectionnelle de série CLP MC
                                                                                                                                                           Document CopyrightsNo duplication or distribution of this document or any portion thereof shall take place without the express written permission of Motorola. No part of this manual may be reproduced, distributed, or transmitted in any form or by any means, electronic or mechanical, for any purpose without the express written permission of Motorola.DisclaimerThe information in this document is carefully examined, and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies. Furthermore, Motorola reserves the right to make changes to any products herein to improve readability, function, or design. Motorola does not assume any liability arising out of the applications or use of any product or circuit described herein; nor does it cover any license under its patent rights nor the rights of others.
CONTENTS                                                                                                                                                           iEnglishCONTENTSComputer Software Copyrights . . . . . . . . . iiiRadio Frequency (RF) Exposure Safety Standards. . . . . . . . . . . . . . . . . . . . . . . . . . . ivProduct Safety and RF Exposure Compliance  . . . . . . . . . . . . . . . . . . . . . .  ivCanada Licensing Information. . . . . . . . . . .vGeneral Information. . . . . . . . . . . . . . . . . . . . .vThe License Application  . . . . . . . . . . . . . . . . .vIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . .1Package Contents. . . . . . . . . . . . . . . . . . . . . .1Radio Overview . . . . . . . . . . . . . . . . . . . . . . .2Radio Controls. . . . . . . . . . . . . . . . . . . . . . . . .2Getting Started  . . . . . . . . . . . . . . . . . . . . . . . .3Install The Battery . . . . . . . . . . . . . . . . . . . . . .3Connecting a Wired Audio Accessory . . . . . . . . . . . . . . . . . . . . . . . . .4Connecting a Bluetooth Wireless Accessory (Select Models Only) . . . . . . . . . . .5Adding Bluetooth Headset (Initial Pairing) . . . . . . . . . . . . . . . . . . . . . 5Reconnecting to Last Connected Bluetooth Headset . . . . . . . . . . . . . . . . . . 5Erasing Bluetooth Headset History and Add Bluetooth Headset. . . . . . . . . . . 5Turning the Radio On and Off . . . . . . . . . 6Adjusting the Volume. . . . . . . . . . . . . . . . 6Installing and Removing the Swivel Belt Clip Holster . . . . . . . . . . . . . . . . . . . . 6Transmitting and Receiving . . . . . . . . . . . . . . 7Operation with Menu Settings  . . . . . . . . . . . . 8Selecting a Channel. . . . . . . . . . . . . . . . . 9Monitoring a Channel. . . . . . . . . . . . . . . 10Scanning . . . . . . . . . . . . . . . . . . . . . . . . 10Dynamic Talkaround Scan (*) . . . . . . . . 11Sending Call Tone (enabled through CPS)  . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Mute Feature (*). . . . . . . . . . . . . . . . . . . 11Talk Permit Tone (*). . . . . . . . . . . . . . . . 11Battery and Charger Features. . . . . . . . . . 12Battery Features. . . . . . . . . . . . . . . . . . . . . . 12
CONTENTS            iiEnglishAbout the Li-Ion Battery  . . . . . . . . . . . . .12Battery Recycling and Disposal  . . . . . . .13Removing the Lithium-Ion (Li-Ion) Battery. . . . . . . . . . . . . . . . . . . . . . . . . . .14Power Supply, Adapter and Drop-in Tray Charger. . . . . . . . . . . . . . . . . . . . . . . . . .14Charging a Standalone Battery. . . . . . . .15Charging the Bluetooth Headset. . . . . . .18Checking Battery Status . . . . . . . . . . . . .18Batteries and Chargers Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . .19Operational Safety Guidelines  . . . . . . . .20Programming the Radio through the CPS . . . . . . . . . . . . . . . . . . . . . . . . . . . .21Downloading the (Customer Programming Software) CPS . . . . . . . . .21Radio Cloning . . . . . . . . . . . . . . . . . . . . . . .24Cloning Radio Settings . . . . . . . . . . . . . . . . .24Cloning Instructions. . . . . . . . . . . . . . . . . . . .24Cloning Radios using the CLP Series Cloning Cable Kit P/N HKKN4026 (optional accessory) . . . . . . . . . . . . . . . . . . . . . . . 24Cloning Radios using the CLP Series Multi-Unit Charger (MUC) Kit P/N HK-PN4007 (optional accessory). . . . . . . . . 27Advanced Radio Configuration (*) . . . . . . 28Entering Advanced Radio Configuration Mode . . . . . . . . . . . . . . . . 28Troubleshooting. . . . . . . . . . . . . . . . . . . . . 29Use and Care  . . . . . . . . . . . . . . . . . . . . . . . 33Radio Frequency and Code Charts  . . . . . 34Motorola Limited Warranty for the United States and Canada . . . . . . . . . . . . . . . . . . . 37Accessories . . . . . . . . . . . . . . . . . . . . . . . . 42Audio Accessories . . . . . . . . . . . . . . . . . . . . 42Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Carry Accessories . . . . . . . . . . . . . . . . . . . . 42Chargers  . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Programming Cables . . . . . . . . . . . . . . . . . . 43
COMPUTER SOFTWARE COPYRIGHTSEnglish                                                                                                                                                           iiiCOMPUTER SOFTWARE COPYRIGHTSThe Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs, including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppels, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive license to use that arises by operation of law in the sale of a product.
RF SAFETY STANDARDSEnglish            ivRADIO FREQUENCY (RF) EXPOSURE SAFETY STANDARDSProduct Safety and RF Exposure Compliance ATTENTION!This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed with your radio (Motorola Publication part number 6881095C98) to ensure compliance with RF energy exposure limits.For a list of Motorola-approved antennas, batteries, and other accessories, visit the following website: www.motorolasolutions.com/CLPClass B Digital DeviceAs a personal computer peripheral, this device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference, and2. This device must accept any interference received, including interference that may cause undesired operation.Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one orBefore using this product, read the operating instructions for safe usage contained in the Product Safety and RF Exposure booklet contained with your radio.C a u t i o n
English                                                                                                                                                           vRF SAFETY STANDARDSmore of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio or TV technician for help.Notice to Users (FCC and Industry Canada)This device complies with Part 15 of the FCC rules and RSS 210 of the Industry Canada rules per the following conditions:• This device may not cause harmful interference.• This device must accept any interference received, including interference that may cause undesired operation.• Changes or modifications made to this device, not expressly approved by Motorola, could void the authority of the user to operate this equipment.
RF SAFETY STANDARDSEnglish            vi
CANADA LICENSING INFORMATIONEnglish                                                                                                                                                           vCANADA LICENSING INFORMATIONGENERAL INFORMATIONThe operation of your Motorola radio is subject to the Radiocommunications Act and must comply with rules and regulations of the Federal Government’s department of Industry Canada. Industry Canada requires that all operators using Private Land Mobile frequencies obtain a radio license before operating their equipment.An application for your Industry Canada license is made on the form included with your packaged radio models. Additional forms and latest license application versions can be obtained from the nearest Industry Canada District office. A list of these offices is included for your information.THE LICENSE APPLICATIONGeneral Instructions1. Fill in the items as per the instructions. If you need additional space for any item use the reverse side of the application.2. Be sure to print legibly.3. Make a copy for your files.4. Prepare a cheque or money order made out to the “Receiver General for Canada”, for an amount, which is on the following schedule, for each radio purchased. (License is renewed on April 1st of each year, and issued for a period of 12 months). 5. Mail your completed application, along with your cheque or money order to the closest Industry Canada District office, according to the list on pages.To obtain the latest Canadian License Application form, please go to:http://www.ic.gc.ca/ic_wp-pa.htm
CANADA LICENSING INFORMATIONEnglish            viNotes
INTRODUCTIONEnglish                                                                                                                                                           1INTRODUCTIONThank you for purchasing a Motorola  CLP Series Two-Way Radio™. Your radio is a product of Motorola’s 80 plus years of experience as a world leader in designing and manufacturing communications equipment. The  CLP Series radios provide cost-effective efficient communications for businesses such as retail stores, restaurants, hotels, and schools. Motorola professional two-way radios are the perfect communications solution for all of today’s fast-paced industries. Please read this guide carefully so you know how to properly operate the radio before use.PACKAGE CONTENTSYour product package contains the following products and manuals:• CLP Series Two-way Radio™• Swivel Belt Clip Holster • Lithium Ion Battery and Battery Door• Drop-In Tray Charger with Transformer• Audio Accessory• User Quick Reference, Chargers Instructions Leaflet, RF Safety Booklet• Warranty CardFor product information, visit us at: www.motorolasolutions.com/CLPFor product-related questions, contact:1-800-448-6686 in the USA1-800-461-4575 in Canada1-866-522-5210 on your TTY (Text Telephone)This user guide covers the following CLP Series™ models (*):Note: Certain models may or may not be available at the time of purchase.Model Frequency Band Transmit Power No. of Channels Bluetooth Repeater CapabilityCLP1013 UHF 1W 1 No YesCLP1043 UHF 1W 4 No YesCLP1063 UHF 1W 6 Yes Yes
RADIO OVERVIEWEnglish            2RADIO OVERVIEWRADIO CONTROLSAccessory ConnectorSmart  StatusGlowVolume Control (+/-)Power/Battery ButtonPush-to-Talk(PTT) ButtonMenu Button
English                                                                                                                                                           3RADIO OVERVIEWGETTING STARTEDINSTALL THE BATTERY 1. Push up the latch at the bottom of the battery door and lift the battery door off the radio. 2. Align the battery contacts with tabs in the battery compartment. Insert the contact side of the battery first, then press the battery down to secure in place. 3. Put the battery door back on the radio. Push down the latch to lock.Note: The CLP Series radios’ standard packaged models come with standard Lithium Ion battery and the standard Lithium Ion battery door. For option, customers can order Hi-capacity Lithium Ion battery (P/N HKNN4013) and the Hi-capacity Lithium Ion battery door (P/N HKLN4440).
RADIO OVERVIEWEnglish            4Connecting a Wired Audio Accessory To connect the wired audio accessory: 1. Turn the radio OFF.2. Remove the accessory connector cover (applicable on bluetooth enabled models only).3. Plug the audio accessory straight into the accessory connector on the radio. Screw the audio accessory plug into the connector until it is tight and fully engaged with the connector. 4. Turn the radio ON. Press either the Battery Status, Menu or Volume Control button to check for audio through the audio accessory. Note: The CLP Series radios offer a variety of audio accessories. For detailed Audio Accessories List, please refer to www.motorolasolutions.com/CLP for information on approved accessories. Lower the radio volume BEFORE placing the audio accessory in or near your ear.
English                                                                                                                                                           5RADIO OVERVIEWCONNECTING A BLUETOOTH WIRELESS ACCESSORY (SELECT MODELS ONLY)Adding Bluetooth Headset (Initial Pairing)1. Turn the radio OFF.2. Put Bluetooth headset in pairing mode. Refer to your Bluetooth headset instructions leaflet.3. Press and hold the PTT button and power button simultaneously until radio shows the blue LED.Note: The Bluetooth feature is disabled when the wired audio accessory is plugged into the accessory connector on the CLP radio.Reconnecting to Last Connected Bluetooth Headset1. Turn the radio OFF.2. Press the power button to turn the radio ON. (Make sure the Bluetooth headset is turned ON).Erasing Bluetooth Headset History and Add Bluetooth Headset 1. Turn the radio OFF.2. Put the Bluetooth headset in pairing mode. Refer to your Bluetooth headset instructions leaflet.3. Press and hold the Menu button and power button simultaneously until radio shows the blue LED.Note: (*) The CLP radio uses proximity pairing. Make sure the headset is close enough  to the CLP radio.  Pairing process takes about 14 seconds. LED ConfigurationUser Mode LED Status ColorBluetoothPairing Mode • Last connection – Fast blinking blue• Add or erase/add – Solid bluePairing Successfully Blue/purple blinks for 5 secondsBluetooth Disconnected Red/purple blinks until the radio reconnectsPairing Fail/Timeout Red/purple blinks until radio reconnects
RADIO OVERVIEWEnglish            6Turning the Radio On and Off• To turn the radio ON, press and hold the Power/Battery button until you hear a short tone and the Smart Status Glow lights up. • To turn it OFF, press and hold the button until you hear a short tone and the Smart Status Glow (red) indicator blinks once. Adjusting the Volume Turn the radio ON and set volume level by pressing volume control (+/- button). A total of 16 volume levels are available.Installing and Removing the Swivel Belt Clip Holster1. Slide the bottom of the radio into the holster.2. Snap the top of the holster into the radio around the accessory connector.3. To remove the holster, pull either the top or bottom tab(s) and pull the radio from the holster.Note: When using a corded audio accessory, loop the cord into the recess in the rear of the holster for optimal plug retention. 4. Make a small loop in the cord. Pass the cord through the cord guide, nest the cord in the U-shaped groove. Pull tight to lock the cord in place.5. Turn the belt clip to the position as needed.Note: The CLP Series radios offer a variety of flexible carrying accessories. For detailed Carrying Accessories List, please refer to www.motorolasolutions.com/CLP for information on approved accessories. Cord GuideU-Shaped Groove
English                                                                                                                                                           7RADIO OVERVIEWTRANSMITTING AND RECEIVING1. To talk, press and hold the PTT button on the front of the radio (or on select wired audio accessories with an inline PTT). Speak clearly into the microphone on the audio accessory. When finished talking, release the PTT to listen. 2. To receive, listen through the earpiece at the volume level you have set. Press the PTT to respond. Note: The CLP Series radios always require the use of an audio accessory with microphone and speaker.  Talk RangeIndustrial Multi-LevelApplicationInside steel/concrete industrial buildingsInside Multi-Level BuildingsUnit to Unit Up to 100,000 square feet Up to 10 floorsWith Repeater Up to 250,000 square feet Up to 20 floors
RADIO OVERVIEWEnglish            8OPERATION WITH MENU SETTINGSPress Menu button to navigate through the Menu settings. Voice Assisted Operation feature may not be available on certain previous shipping models. At any time in Menu mode, short press PTT or wait 3 seconds to exit the menu. HOW TO... STEP 1 STEP 2Change Channel Press Menu button to navigate to Channel.Press +/- button to change channel.Enter Monitor Mode Press Menu button to navigate to Monitor.Press +/- button to activate or deactivate Monitor.Enter Scan  Mode  Press Menu button to navigate to Scan.Press +/- button to activate or deactivate Scan.Send Call Tone (enabled through CPS)Press Menu button to navigate to Call Tone.Press +/- button to send Call Tone.Quick Tip: It is not necessary to wait for the voice prompt to be completed before continuing with next button press.Note:     For single channel models, Monitor, Scan Mode and Call Tone are supported. Single channel models support Scan Mode when the user enables “Dynamic Talkaround Scan” on a repeater channel via the customer programming software.
English                                                                                                                                                           9RADIO OVERVIEWSelecting a ChannelFor CLP multi-channel models only: • When powered ON, press the Menu button, you will hear the voice prompt:• [Color] “Channel” – [Channel#] – “To change” – “press +/-”• Select the channel you want. The LED will reflect the color of the new channel. Press PTT button to confirm or it is activated after a 3 second hang time. CLP1013 Single-Channel Models CLP1043 Multi-Channel Models CLP1063 Multi-Channel ModelsChannel LED Status  Color Channel      LED   Status  Color Channel  LED Status Color 1   Red      1 Red 1   Red     2  Green 2Green  3 Yellow 3Yellow 4 Blue   4 Blue  5 Purple6White
RADIO OVERVIEWEnglish            10Monitoring a Channel1. To activate, press the Menu button to navigate to Monitor mode.2. When Monitor is OFF, you will hear the voice prompt: “Monitor” – “To activate” – “press +/-”. 3. Press either “+/-“ button to activate the Monitor; press either “+/-“ button again to deactivate.Note: When Monitor is ON, you will hear static if no activity is present or audio if channel activity is present.4. To engage the Monitor mode, enable Monitor via the menu and let the menu time out. 5. To deactivate, press PTT during Monitor Menu mode.Scanning(*) For multi-channel models onlyYou can scan up to 4 channels on CLP 1043 models and scan up to 6 channels on CLP1063 models. When the radio detects activity, it stops scanning and locks in on the active channel. This allows you to talk and listen to the person transmitting without changing channels. 1. Press the Menu button to navigate to Scan mode.2. When Scan is OFF, you will hear the voice prompt: “Scan” – “To activate” – “press +/-”. 3. Press either “+/-“ button to activate the Scan; press either “+/-“ button again to deactivate.4. When Scan is on, you will hear the voice prompt: “Scan” – “To deactivate” – “press +/-” button.
English                                                                                                                                                           11RADIO OVERVIEWDynamic Talkaround Scan (*)"Dynamic Talkaround Scan" is a simple but effective method for an on-site repeater enabled two-way radio systems to maximize communication coverage. This feature can be enabled on a repeater channel via the Customer Programming Software (CPS). The Dynamic Talkaround Scan gives the radio the ability to scan both the transmit and receive frequencies of a repeater channel. Note: (*) Enhancement feature on CLP Radios. May not be available on previous shipping radios. The Dynamic Talkaround Scan is given higher priority then the Scan Mode.  If the Dynamic Talkaround  Scan and Scan is enabled on the home channel, then the radio can only support the Dynamic Talkaround Scan.  Sending Call Tone (enabled through CPS)1. Press the Menu button to navigate to Call Tone. 2. Press either “+/-“ button to transmit selected Call Tone.Note: There are 4 Call Tones available.Mute Feature (*)You can quickly lower the headset volume using the Mute feature.1. Press and hold  + or -  button while receiving audio to quickly lower the headset volume to “Mute Headset Volume” setting (configurable via CPS). You can hear the voice prompt: "Mute" 2. To switch back to the previous headset volume setting, press and hold + or - button again. You can hear the voice prompt: "Unmute". Note: (*) Enhancement feature on CLP radios. May not available on previous shipping radios.  The enhanced CLP does not support the volume scroll like the previous CLP models.Talk Permit Tone (*)In mixed fleet situations (CLP1013 or CLP1043 and CLP1063), Bluetooth users may miss some words due to the Bluetooth connection not being established. Talk Permit Tone allocates some time so that the link between the radio and headset gets reestablished thus minimizing the lost words. (The Talk Permit Tone is disabled by default on CPS on the Bluetooth models). Note: (*) Enhancement feature on CLP radios may not be available on previous shipping radios.
BATTERY AND CHARGER FEATURESEnglish            12BATTERY AND CHARGER FEATURESBATTERY FEATURESThe CLP Series radio provides Lithium-Ion batteries that come in different capacities that will define the battery life. About the Li-Ion BatteryThe CLP Series radio comes equipped with a rechargeable Li-Ion battery. This battery should be charged before initial use to ensure optimum capacity and performance. Battery life is determined by several factors. Among the more critical are the regular overcharge of batteries and the average depth of discharge with each cycle. Typically, the greater the overcharge and the deeper the average discharge, the fewer cycles a battery will last. For example, a battery which is overcharged and discharged 100% several times a day, lasts fewer cycles than a battery that receives less of an overcharge and is discharged to 50% per day. Further, a battery which receives minimal overcharging and averages only 25% discharge, lasts even longer.Motorola batteries are designed specifically to be used with a Motorola charger and vice versa. Charging in non-Motorola equipment may lead to battery damage and void the battery warranty. The battery should be at about 77 °F (25 °C) (room temperature), whenever possible. Charging a cold battery (below 50 ° F [10 °C]) may result in leakage of electrolyte and ultimately in failure of the battery. Charging a hot battery (above 95 °F [35 °C]) results in reduced discharge capacity, affecting the performance of the radio. Motorola rapid-rate battery chargers contain a temperature-sensing circuit to ensure that batteries are charged within the temperature limits stated above. Battery Life  Based on 5% transmit, 5% receive, 90% standby (standard duty cycle): Estimated Battery LifeCharging SolutionBattery TypeStandard Li- Ion Battery High Capacity Li-Ion BatteryCLP1013, CLP1043  9 hours 14 hoursCLP1063  8 hours 12 hours
BATTERY AND CHARGER FEATURESEnglish                                                                                                                                                           13Battery Recycling and DisposalLi-Ion rechargeable batteries can be recycled. However, recycling facilities may not be available in all areas. Under various U.S. state laws and the laws of several other countries, batteries must be recycled and cannot be disposed of in landfills or incinerators. Contact your local waste management agency for specific requirements and information in your area. Motorola fully endorses and encourages the recycling of Li-Ion batteries. In the U.S. and Canada, Motorola participates in the nationwide Rechargeable Battery Recycling Corporation (RBRC) program for Li-Ion battery collection and recycling. Many retailers and dealers participate in this program. For the location of the drop-off facility closest to you, access RBRC's Internet web site at: http://www.call2recycle.org  or call: 1-877-723-1297.This internet site and telephone number also provides other useful information concerning recycling options for consumers, businesses and governmental agencies.
BATTERY AND CHARGER FEATURESEnglish            14Removing the Lithium-Ion (Li-Ion) Battery1. Turn OFF the radio.2. Push up the latch at the bottom of the battery door and lift the battery door off the radio.3. Pull the battery away from the radio.Power Supply, Adapter and Drop-in Tray ChargerThe radio is packaged with one Drop-in Tray Charger with transformer. For details, see “Chargers” Section on page 42.Battery Latch
BATTERY AND CHARGER FEATURESEnglish                                                                                                                                                           15Charging a Standalone Battery For your convenience the battery on the CLP radios can be charged as a stand alone battery using either a Single Unit Charger (SUC) or a Multi-Unit Charger (MUC).Note: When acquiring additional chargers or power supplies, make sure you have similar drop-in tray chargers and power supplies sets. For part number details, refer to “Chargers” Section on page 44.To charge only the battery: 1. Insert the connector of the power supply into the Micro USB port on the front of the drop-intray charger.2. Connect the CLP power supply to a proper AC outlet.3. Insert the battery into the tray, with the inside surface of the battery facing the front of the charger, as shown. 4. Ensure the slots in the battery correctly engage in the charger.Estimated Charging TimeThe following table provides the estimated charging time of the battery. 5. For further details, see “Batteries” Section on page 43.Micro-USB C ha rg in g                JackEstimated Charging TimeCharging SolutionBattery TypeStandard Li- Ion Battery High Capacity Li-Ion BatterySingle Unit Charger 4 hours 5.5 hoursMulti Unit Charger  2.5 hours 4 hours
BATTERY AND CHARGER FEATURESEnglish            16Charging the Radio with the Drop-in Tray Single Unit Charger (SUC)1. Place the drop-in tray charger on a flat surface.2. Insert the connector of the power supply into the Micro USB port on the front of the drop-in tray charger.3. Connect the correct power supply to a proper AC outlet.4. Insert the radio (with battery installed) into the tray, facing down and making sure the charging contacts on the charger are aligned with the contacts on the radio. Note: When charging a battery attached to a radio, turn the radio OFF to ensure a full charge.  The radio will fit in the charger with the holster attached when placed face down in the tray. Charging with the Drop-In Tray Multi-Unit Charger (Optional Accessory)   The Multi-Unit Charger (MUC) allows drop-in charging of up to 6 radios. Each of the 6 charging pockets can hold a radio (with battery installed). The Multi-Unit Charger provides pockets for headset storage. 1. Place the charger on a flat surface or mount it on the wall. 2. Insert the power cord plug into the jack on the MUC.
BATTERY AND CHARGER FEATURESEnglish                                                                                                                                                           173. Plug the cord into an AC outlet and then into charger. 4. Turn the radio OFF. Note: If the radio is ON while charging, it will take longer to fully charge.5. Insert the radio facing down (with battery installed) into the charging pocket, making sure the radio contacts are aligned with the MUC contacts.Note: The battery can be charged by itself using the slot on the flat surface of the charging pocket. Charging Status LEDs On the drop-in charger, the radio charging pocket has an LED Charger. On the MUC, each of the 6 charging pockets has an LED. The LEDs are grouped into pairs to show which charging pockets are paired. The LED is red when the battery is charging. It turns to green once the battery is fully charged.Note: This Multi Unit Charger allows you to clone up to 2 radios (2 Source radios and 2 Target radios). For more details, refer to “Radio Cloning” Section on page 24.• For part number details, refer to the “Accessories” Section on page 42. Charger LED IndicatorStatus LED Status CommentsCharging Steady Red    IndicationThe charger is currently charging.Charge Complete  Steady  Green    Indication Battery is fully charged.Battery Fault (*)   Blinking Red  Battery was faulty when inserted.Note: The LED is red when the battery is charging. It turns to green once the battery is fully charged.Note: (*) Re-seating the battery pack will likely correct this issue.
BATTERY AND CHARGER FEATURESEnglish            18Charging the Bluetooth HeadsetRefer to your Bluetooth headset leaflet for charging instruction.Charging Bluetooth Headset with CLP Series Drop-In Tray Multi-Unit Charger and Cloning Cable (Optional Accessory)You can also charge your Bluetooth headset with CLP Series Multi Unit Charger (MUC) P/N HKPN4007 (optional accessory) and Cloning Cable P/N HKKN4026 (optional accessory).• Plug one side of the cloning cable microconnector to the USB port of the Multi-Unit Charger (there are 6 USB port on top of the accessory pockets)• Plug the other end of the cloning cable to the USB port of the Bluetooth headset for chargingNote: Refer to  the charging status light on your Bluetooth headset leaflet. Checking Battery StatusWhen powered on, short press and release the Power/Battery button, the Smart Status Glow and Voice Assisted Operation features(*)  will give you the battery status of the radio. After the Smart Status Glow and Voice Assisted Operation features(*)  indicate the BATTERY STATUS, it will return to the current channel color.Note: (*) May not be available on certain previous shipping radios.Battery StatusLevel LED Status ColorBattery Level High  (70 –100%) GreenBattery Level Medium   (30 – 70%) Yellow Battery Level Low (10 – 30%) RedBattery Level Critical (0 – 10%)  Blinking Red
                                                                                                                                                           19BATTERIES AND CHARGERS SAFETY INFORMATIONEnglishBATTERIES AND CHARGERS SAFETY INFORMATIONThis document contains important safety andoperating instructions. Read these instructionscarefully and save them for future reference.Before using the battery charger, read all theinstructions and cautionary markings on•  the charger,•  the battery, and•  the radio using the battery1. To reduce risk of injury, charge only the rechargeable Motorola-authorized batteries. Other batteries may explode, causing personal injury and damage.2. Use of accessories not recommended by Motorola may result in risk of fire, electric shock, or injury.3. To reduce risk of damage to the electric plug and cord, pull by the plug rather than the cord when disconnecting the charger.4. An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in risk of fire and electric shock. If an extension cord must be used, make sure that the cord size is 18 AWG for lengths up to 6.5 feet (2.0 m), and 16 AWG for lengths up to 9.8 feet (3.0 m).5. To reduce risk of fire, electric shock, or injury, do not operate the charger if it has been broken or damaged in any way. Take it to a qualified Motorola service representative.6. Do not disassemble the charger; it is not repairable and replacement parts are not available. Disassembly of the charger may result in risk of electrical shock or fire.7. To reduce risk of electric shock, unplug the charger from the AC outlet before attempting any maintenance or cleaning
BATTERIES AND CHARGERS SAFETY INFORMATION            20EnglishOPERATIONAL SAFETY GUIDELINES• Turn the radio OFF when charging battery.• The charger is not suitable for outdoor use. Use only in dry locations/conditions.• Connect charger only to an appropriately fused and wired supply of the correct voltage (as specified on the product).• Disconnect charger from line voltage by removing main plug.• The outlet to which this equipment is connected should be nearby and easily accessible.• Maximum ambient temperature around the power supply equipment must not exceed 40 °C (104 °F).• Make sure that the cord is located where it will not be stepped on, tripped over, or subjected to water, damage, or stress.
English                                                                                                                                                           21PROGRAMMING THE RADIO THROUGH THE CPSPROGRAMMING THE RADIO THROUGH THE CPS RADIO PROGRAMMING OVERVIEWDownloading the (Customer Programming Software) CPS You can program or change features on your CLP radios by using the Computer Programming Software (CPS) and the CPS Programming Cable (*). CPS software is available for free as web based downloadable software at: www.motorolasolutions.com/CLPAfter downloading the CPS, install the software to your computer. Programming the RadioTo program the radio:1. Connect the radio via the Drop-in Charger Tray or the Charging Pocket with “PROG” label on the Multi-Unit Charger and CPS Programming Cable. Programming the Radio through a Single Unit Charger Programming the Radio through a Multi-Unit Charger
PROGRAMMING THE RADIO THROUGH THE CPSEnglish            222. Make sure the radio is turned ON. 3. Once the radio is connected, open the CPS and select “Read” on the toolbar to get the radio profile. The CPS allows the user to change settings, such as General, Audio, Menu, Channels, Scan List, Customized PL/DPL, Bluetooth(*) , as well as select frequencies, PL/DPL codes on each channel. 4. After you change the settings, press “Write” on the toolbar to save the settings.For more information on the Computer Programming Software, please refer to Help menu on the CPS.  Note: (*) CPS Programming Cable (P/N HKKN4025) is an accessory sold separately. Please contact your Motorola Point of Purchase for more information. (*)Bluetooth is available on selected models only.Factory Default SettingsYour radio is programmed at the factory to the following settings:CLP1013 1W UHF 1 CH Radios Default Settings - BRCANChannel #Frequency #Frequency SettingCode Value (Hz)Bandwidth(kHz)1 1 458.6625 67.0 12.5 CLP1043  1W UHF 4 CH Radios Default Settings - BRCANChannel #Frequency #Frequency SettingsCode Value (Hz)Bandwidth(kHz)1 1 458.6625 67.0 12.5 2 2 469.2625 67.0 12.5 3 1 458.6625 71.9 12.5 4 2 459.2625 71.9 12.5
English                                                                                                                                                           23PROGRAMMING THE RADIO THROUGH THE CPSCLP1063  1W UHF 6 CH Radios Default Settings - BRCANChannel #Frequency #Frequency SettingsCode Value (Hz)Bandwidth(kHz)1 1 458.6625 67.0 12.5 2 2 469.2625 67.0 12.5 3 1 458.6625 71.9 12.5 4 2 469.2625 71.9 12.5 5 1 458.6625 74.4 12.5 6 2 469.2625 74.4 12.5
RADIO CLONINGEnglish            24RADIO CLONINGCLONING RADIO SETTINGSYou can copy the CLP Series radio settings from one radio (the source) to a second radio using the CLP Series Single Unit Charger (SUC) Kit P/N HKPN4008 and CLP Series Cloning Cable Kit P/N HKKN4026 (optional accessory) or CLP Series Multi-Unit Charger (MUC) Kit P/N HKPN4007 (optional accessory). A multi-channel radio can be cloned to a single-channel radio BUT only the first channel is cloned. The Multi-Unit Charger (MUC) does not have to be plugged in for cloning, but both radios require charged batteries. CLONING INSTRUCTIONSCloning Radios using the CLP Series  Cloning Cable Kit P/N HKKN4026 (optional accessory)Source Radio:    Radio to be clonedTarget Radio:      Radio to which the configuration of the “Source Radio” will be copied.Before beginning the cloning process, makesure you have:• A fully charged battery on each one of theradios• Two CLP Series Single Unit Charger (SUC) Kits • Both radios are turned OFF1. Unplug any cables (power supply or USB cables) from the Single Unit Chargers.    Cloning the Radio through a Single Unit Charger
English                                                                                                                                                           25RADIO CLONING2. Plug one side of the cloning cable microconnector to one Single Unit Charger. Plug the other end to the second Single Unit Charger.Note: During the cloning process no power is being applied to the Single Unit Charger. The batteries will not be charged. A data communication is being established between the two radios.3. Turn ON the “Target Radio” and place it into one of the Single Unit Chargers.4. On the “Source Radio”, power the radio following the sequence below: Press and hold the Push-to-Talk (PTT) and the “-” Button simultaneously while turning the radio ON until you hear the Cloning Tone and Double Blinking Yellow   on the Smart Status Glow. 5. Place the “Source Radio” in its Single Unit Charger with an Audio accessory, then press and release Menu Button to start the cloning process.6. After cloning is completed, the “Source Radio” will sound either a “pass” tone (cloning was successful) or a “fail” tone (cloning process has failed). The pass tone sounds like a good key “chirp” whereas the “fail” tone sounds similar to a “bonk” tone. (A tone will be heard in no more than 5 seconds).7. Once you have completed the cloning process, you should turn the radios “OFF” and “ON”  to bring them to normal user mode (exit “clone” mode).
RADIO CLONINGEnglish            26What to do if cloning failsThe radio will emit an audible “bonk” indicatingthat the cloning process has failed. In the eventthat cloning fails, try performing each of thefollowing before trying to start the cloningprocess again.1. Make sure that the radio batteries on both radios are fully charged.2. Verify the cloning cable connection on both Single Unit Chargers.3. Make sure that the battery is engaged properly on to the radio.4. Make sure that there is no debris in the charging tray or on the radio contacts.5. Verify that the source radio is in cloning mode.6. Make sure that the radio to be cloned is turned ON.7. Make sure that radios are both from the same type (same frequency band, same region and same transmission power).Note: This cloning cable is designed to operate only with compatible Motorola Drop-in Tray Single Unit Charger. When ordering the cloning cable, please refer to CLP Series Cloning Cable Kit P/N HKKN4026. For details about accessories, refer to "Accessories" Section on page 42.
English                                                                                                                                                           27RADIO CLONINGCloning Radios using the CLP Series Multi-Unit Charger (MUC) Kit P/N HKPN4007 (optional accessory)1. To put the source radio into clone mode, press and hold PTT and the “-” button while turning the radio ON until you hear the Cloning Tone and Double Blinking Yellow  on the Smart Status Glow.2. Place the source radio into one of the charging pockets that has the “CLONE” label. 3. Turn the target radio ON and place it in the pairing charging pocket that has the “CLONE” label and start the cloning process.4. Press the “Menu” button on the source radio to start the cloning process.  The source radio  generates the start clone tone.5. Once the cloning is completed, turn the target radio OFF and back ON again in order to activate the radio.6. To clone another radio, repeat steps 3, 4 and 5.7. To exit clone mode on the source radio, turn the radio OFF.    Cloning the Radio through a Multi-Unit Charger
ADVANCED RADIO CONFIGURATION (*)            28EnglishADVANCED RADIO CONFIGURATION (*)(*) Enhancement feature on CLP radios. May not be available on previous shipping radios.Advanced Radio Configuration provides you with the ability to configure the following settings from a pre-programmed list without the need to use a computer.• Channels • Frequencies• Codes (CTCC/DPL)Frequencies allows the user to select frequencies for each channel. Codes helps minimize interference by providing the user with a choice of code combinations that filter out static, noise, and unwanted messages.Entering Advanced Radio Configuration ModeBefore starting, make sure the device is powered OFF. Note: For Bluetooth models, make sure the wired accessory is connected or the Bluetooth headset is paired before entering Advanced Radio Configuration Mode.1. Press the PTT, “+” button and Power button at the same time and hold for 3 to 5 seconds until you hear a “chirp” sound and the voice prompt “Programming Mode”.Note: The LED Indicator should start blinking a green heartbeat.2.  Press the Menu button to select the    settings you want to change:• Channel (for multi-channel models) • Frequency•Code3. The voice announcements indicate the menu items and their current settings. To change, press “+/-” buttons; to go to the next menu item, press Menu button. 4. To exit the Advanced Radio Configuration Mode, press and hold the PTT button until you hear a “beep” sound.5.  Resume normal radio operation.
English                                                                                                                                                           29TROUBLESHOOTINGTROUBLESHOOTING  Symptom Try thisNo Power Recharge or replace Li-Ion battery. Extreme operating temperatures affect battery life. Refer to “About the Li-Ion Battery” Section on page 12.Hearing other noises or conversation on a channelConfirm Interference Eliminator Code is set. Frequency or Interference Eliminator Code may be in use. Change settings: either change frequencies or codes on all radios. Make sure radio is at the right frequency and code when transmitting. Message Scrambled Scramble Code might be ON, and/or setting does not match other radios' settings. Use CPS to change settings.Audio quality not good enough Radio settings might not be matching up correctly.Double check frequencies, codes and bandwidths to ensurethey are identical  in all radios.
TROUBLESHOOTINGEnglish            30Limited talk range Steel and/or concrete structures, heavy foliage, buildings or vehicles decrease range. Check for clear line of sight to improve transmission. Change location of radio. To increase range and coverage, you can either reduce obstructions or increase power.UHF radios provide greater coverage in industrial and commercial buildings.Increasing power provides greater signal range and increased penetration through obstructions.Message not transmitted/ receivedMake sure the PTT button is completely pressed when transmitting.Confirm that the radios have the same Channel, Frequency, Interference Eliminator Code and Scramble Code settings. Refer to “Transmitting and Receiving” Section on page 7.Recharge, replace and/or reposition batteries. Refer to “About the Li-Ion Battery” Section on page 12.Obstructions and operating indoors, or in vehicles, may interfere. Change location. Verify that the radio is not in Scan mode. Refer to “Scanning” Section on page 10.Symptom Try this
English                                                                                                                                                           31TROUBLESHOOTINGHeavy static or interference Radios are too close, they must be at least five feet apart. Radios are too far apart or obstacles are interfering with transmission. Low batteries Recharge or replace Li-Ion battery.  Extreme operating temperatures affect battery life. Refer to “About the Li-Ion Battery” Section on page 12.Drop-in Charger LED light does not blinkCheck radio/battery is properly inserted and check battery/charger contacts to ensure they are clean and the charging pin is inserted correctly. Refer to “Charging a Standalone Battery” Section on page 15 and “Charger LED Indicator” Section on page 17.Symptom Try this
TROUBLESHOOTINGEnglish            32Cannot activate VOX VOX feature might be OFF. Use the CPS to ensure that the VOX Sensitivity Level is not set to “0”. Accessory not working or not compatible.Battery doesn't charge although it has been placed in the drop-in charger for a whileCheck drop-in charger is connected and correspond to a compatible power supply. Refer to “Charging a Standalone Battery” Section on page 15.Check the charger LEDs indicators to see if battery has a problem. Refer to “Charger LED Indicator” Section on page 17.Unable to pair a Bluetooth headset Make sure the target Bluetooth headset is not connected to another device.Unable to connect to a Bluetooth headsetMake sure the target Bluetooth headset is not connected to another device.Pairing with wrong Bluetooth headsetDon’t perform pairing procedures next to other Bluetooth headset devices. CLP Bluetooth uses proximity pairing. Make sure the headset is placed next to the CLP radio.Note: Whenever a feature in your radio seems to not correspond to the default or preprogrammed values, check if your radio have been programmed using CPS with a customized profile.Symptom Try this
English                                                                                                                                                           33USE AND CAREUSE AND CAREUse a soft damp clothto clean the exterior.Turn OFF andremove batteries. Dry with soft cloth. Do not use untilcompletely dry.Do not immerse in water. Do not use alcohol orcleaning solutions.If the portable is submerged in water...
RADIO FREQUENCY AND CODE CHARTSEnglish            34RADIO FREQUENCY AND CODE CHARTSThese charts provide frequency information and are useful when using Motorola CLP Series Two-Way Radios with other business radios.  Most of the frequency positions are the same as Spirit M, GT, S, XTN, RDX and CLS Series frequency positions (where applicable), the bandwidths are different.  CLP UHF FrequenciesFreq. #  Frequency (MHz) Bandwidth(kHz)1458.6625 12.52469.2625 12.5
RADIO FREQUENCY AND CODE CHARTSEnglish                                                                                                                                                           35 CTCSS/DPL Interference Eliminator CodesCTCSS Code CTCSS/DPL Code DPL  Code DPL Code DPL Code0Disabled 24 151.4 47 54 71 243 95 445167 25 156.7 48 65 72 244 96 464271.9 26 162.2 49 71 73 245 97 465374.4 27 167.9 50 72 74 251 98 466477 28 173.8 51 73 75 261 99 503579.7 29 179.9 52 74 76 263 100 506682.5 30 186.2 53 114 77 265 101 516785.4 31 192.8 54 115 78 271 102 532888.5 32 203.5 55 116 79 306 103 546991.5 33 210.7 56 125 80 311 104 56510 94.8 34 218.1 57 131 81 315 105 60611 97.4 35 225.7 58 132 82 331 106 61212 100 36 233.6 59 134 83 343 107 62413 103.5 37 241.8 60 143 84 346 108 62714 107.2 38 250.3 61 152 85 351 109 63115 110.9 122 69.3 62 155 86 364 110 63216 114.8 39 23 63 156 87 365 111 65417 118.8 40 25 64 162 88 371 112 66218 123 41 26 65 165 89 411 113 66419 127.3 42 31 66 172 90 412 114 70320 131.8 43 32 67 174 91 413 115 71221 136.5 44 43 68 205 92 423 116 72322 141.3 45 47 69 223 93 431 117 73123 146.2 46 51 70 226 94 432 118 732119 734
RADIO FREQUENCY AND CODE CHARTSEnglish            36CTCSS/DPL Interference Eliminator Codes (cont’d)DPL Code DPL Code DPL  Code DPL Code120 743 146 Inverted DPL 55 171 Inverted DPL 80 195 Inverted DPL 104121 754 147 Inverted DPL 56 172 Inverted DPL 81 196 Inverted DPL 105123 645 148 Inverted DPL 57 173 Inverted DPL 82 197 Inverted DPL 106124 Customized PL 149 Inverted DPL 58 174 Inverted DPL 83 198 Inverted DPL 107125 Customized PL 150 Inverted DPL 59 175 Inverted DPL 84 199 Inverted DPL 108126 Customized PL 151 Inverted DPL 60 176 Inverted DPL 85 200 Inverted DPL  109127 Customized PL 152 Inverted DPL 61 177 Inverted DPL 86 201 Inverted DPL 110128 Customized PL 153 Inverted DPL 62 178 Inverted DPL 87 202 Inverted DPL 111129 Customized PL 154 Inverted DPL 63 179 Inverted DPL 88 203 Inverted DPL 112130 Inverted DPL 39 155 Inverted DPL 64 180 Inverted DPL 89 204 Inverted DPL 113131 Inverted DPL 40 156 Inverted DPL 65 181 Inverted DPL 90 205  Inverted DPL 114132 Inverted DPL 41 157 Inverted DPL 66 181 Inverted DPL 90 206  Inverted DPL 115133 Inverted DPL 42 158 Inverted DPL 67 182 Inverted DPL 91 207  Inverted DPL 116134 Inverted DPL 43 159 Inverted DPL 68 183 Inverted DPL 92 208  Inverted DPL 117135 Inverted DPL 44 160 Inverted DPL 69 184 Inverted DPL 93 209  Inverted DPL 118136 Inverted DPL 45 161 Inverted DPL 70 185 Inverted DPL 94 210  Inverted DPL 119137 Inverted DPL 46 162 Inverted DPL 71 186 Inverted DPL 95 211  Inverted DPL 120138 Inverted DPL 47 163 Inverted DPL 72 187 Inverted DPL 96 212  Inverted DPL 121139 Inverted DPL 48 164 Inverted DPL 73 188 Inverted DPL 97 213  Inverted DPL 123140 Inverted DPL  49 165 Inverted DPL 74 189 Inverted DPL 98 214 Customized DPL141 Inverted DPL 50 166 Inverted DPL 75 190 Inverted DPL 99 215 Customized DPL142 Inverted DPL 51 167 Inverted DPL 76 191 Inverted DPL 100 216 Customized DPL143 Inverted DPL 52 168 Inverted DPL 77 192 Inverted DPL 101 217 Customized DPL144 Inverted DPL 53 169 Inverted DPL 78 193 Inverted DPL 102 218 Customized DPL145 Inverted DPL 54 170 Inverted DPL 79 194 Inverted DPL 103 219 Customized DPL
English                                                                                                                                                           37WARRANTYMOTOROLA LIMITED WARRANTY FOR THE UNITED STATES AND CANADAWhat Does this Warranty Cover?Subject to the exclusions contained below, Motorola Solutions, Inc. warrants its telephones, pagers, and consumer and business two-way radios (excluding commercial, government or industrial radios) that operate via Family Radio Service or General Mobile Radio Service, Motorola-branded or certified accessories sold for use with these Products (“Accessories”) and Motorola software contained on CD-ROMs or other tangible media and sold for use with these Products (“Software”) to be free from defects in materials and workmanship under normal consumer usage for the period(s) outlined below. This limited warranty is a consumer's exclusive remedy, and applies as follows to new Motorola Products, Accessories and Software purchased by consumers in the United States and Canada, which are accompanied by this written warranty.Products and Accessories Products Covered Length of CoverageProducts and Accessories as defined above, unless otherwise provided for below.One (1) year from the date of purchase by the first consumer purchaser of the product unless otherwise provided for below.Decorative Accessories and Cases.Decorative covers, bezels, PhoneWrap™ covers and cases.Limited lifetime warranty for the lifetime of ownership by the first consumer purchaser of the product.Business Two-way Radio AccessoriesOne (1) year from the date of purchase by the first consumer purchaser of the product.Products and Accessories that are Repaired or Replaced.The balance of the original warranty or for ninety (90) days from the date returned to the consumer, whichever is longer.
WARRANTYEnglish            38ExclusionsNormal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage.Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this limited warranty.Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of Motorola, are excluded from coverage. Use of Non-Motorola Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products, Accessories, Software or other peripheral equipment are excluded from coverage.Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than Motorola, or its authorized service centers, are excluded from coverage.Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola housings, or parts, are excluded form coverage.
English                                                                                                                                                           39WARRANTYCommunication Services. Defects, damages, or the failure of Products, Accessories or Software due to any communication service or signal you may subscribe to or use with the Products Accessories or Software is excluded from coverage.Software ExclusionsSoftware Embodied in Physical Media. No warranty is made that the software will meet your requirements or will work in combination with any hardware or software applications provided by third parties, that the operation of the software products will be uninterrupted or error free, or that all defects in the software products will be corrected.Software NOT Embodied in Physical Media. Software that is not embodied in physical media (e.g. software that is downloaded from the internet), is provided “as is” and without warranty.WHO IS COVERED?This warranty extends only to the first consumer purchaser, and is not transferable.WHAT WE WILL DO TO CORRECT WARRANTY PROBLEMSAt no charge to you, we have the option to repair or replace the Products or software that do not conform to the warranty, or to refund the Products’ purchase price. We may use functionally equivalent reconditioned/refurbished/pre-owned or new Products or parts. No software updates are provided.HOW TO OBTAIN WARRANTY SERVICE OR OTHER INFORMATION?Contact your Motorola point of purchase. Products Covered Length of CoverageSoftware. Applies only to physical defects in the media that embodies the copy of the software (e.g. CD-ROM, or floppy disk).Ninety (90) days from the date of purchase.
WARRANTYEnglish            40You will receive instructions on how to ship the Products to Motorola. You must ship the Products to us with freight, duties and insurance prepaid. Along with the Products you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase; (b) a written description of the problem; (c) the name of your service provider (if this Product requires subscription service); (d) the name and location of the installation facility (if applicable) and, most importantly;(e) your address and telephone number. If requested, you must also return all detachable parts such as antennas, batteries and chargers. RETAIN YOUR ORIGINAL PROOF OF PURCHASE.We will ship repaired or replacement Products at our expense for the freight and insurance, but at your expense for any duties. If additional information is needed, please contact us at the telephone number listed above.SOFTWARE COPYRIGHT NOTICEThe Motorola products described in this manual may include copyrighted Motorola and third party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the Motorola products may not be modified, reverse-engineered, distributed, or reproduced in any manner to the extent allowed by law.Furthermore, the purchase of the Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Motorola or any third party software provider, except for the normal, non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product.
English                                                                                                                                                           41WARRANTYPATENT NOTICEThis product is covered by one or more of the following United States patents.5896277 5894292 5864752 5699006 5742484 D408396 D399821 D387758 D389158 5894592 5893027 5789098 5734975 5861850 D395882 D383745 D389827 D389139 5929825 5926514 5953640 6071640 D413022 D416252 D416893 D433001.EXPORT LAW ASSURANCESThis product is controlled under the export regulations of the United States of America. The Governments of the United States of America may restrict the exportation or re-exportation of this product to certain destinations. For further information contact the U.S. Department of Commerce.
English            42ACCESSORIESACCESSORIESAUDIO ACCESSORIESBATTERIESCARRY ACCESSORIESCHARGERSPROGRAMMING CABLESNote: (*) Certain accessories may be or may not be available at the time of purchase. For latest information on accessories, contact your Motorola point of purchase or visit: www.motorolasolutions.com/CLPPart No. DescriptionHKLN4437_/HKLN4529_ CLP Single Pin Short Cord EarpieceHKLN4455_/HKLN4602_ CLP Single Pin Non-Adjustable PTT EarpieceHKLN4487_/HKLN4603_ CLP Single Pin Surveillance EarpiecePart No. DescriptionHKNN4013_ CLP Series High Capacity Li-Ion Battery KitHKNN4014_ CLP Series Standard Li-Ion Battery KitHKLN4440_  CLP High Capacity Li-Ion Battery Door KitHKLN4441_ CLP Standard Li-Ion Battery Door KitPart No. DescriptionHKLN4433_  CLP Series Magnetic Case HKLN4438_ CLP Series Swivel Belt Clip HolsterPart No. DescriptionHKPN4007_ CLP Series Multi Unit Charger (MUC) KitHKPN4008_ CLP Series Single Unit Charger (SUC)  KitPart No. DescriptionHKKN4025_  CLP Series CPS Cable KitHKKN4026_ CLP Series Cloning Cable Kit
ACCESSORIESEnglish                                                                                                                                                        43For product-related questions, contact:1-800-448-6686 in the USA1-800-461-4575 in Canada1-866-522-5210 on your TTY (Text Telephone)
English            44ACCESSORIESNotes

Navigation menu