Motorola Solutions 89FT4872 PORTABLE 2-WAY RADIO User Manual BPR40 UG text Eng EME

Motorola Solutions, Inc. PORTABLE 2-WAY RADIO BPR40 UG text Eng EME

Contents

USERS MANUAL 1

PRODUCT SAFETY AND RF EXPOSURE COMPLIANCEATTENTION!This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed with your radio (Motorola Publication part number 6881095C98) to ensure compliance with RF energy exposure limits.For a list of Motorola-approved antennas, batteries, and other accessories, visit the following web site which lists approved accessories: http://www.motorola.com/governmentandenterpriseMag One™ by Motorola is registered in the U.S. Patent and Trademark Office.All other products and service names are the property of their own respective owners. © Motorola, Inc. 2005, 20061301 E. Algonquin Rd., Schaumburg, IL 60196Printed in Korea. 03/06. All Rights Reserved.Before using this product, read the operating instructions for safe usage contained in the Product Safety and RF Exposure booklet enclosed with your radio.*6881098C61*6881098C61-BAttaching and Removing the AntennaTo Attach AntennaTo Remove Antenna1. Fasten the antenna to the radio by placing the threaded end of the antenna into the Antenna Connector.2. Rotate the antenna clockwise until tight.1. Turn the antenna in a counter-clockwise direction until it disengages from the radio.Threaded Endof AntennaAntenna ConnectorAttaching and Removing the BatteryTo Attach BatteryTo Remove Battery1. Align and fit the battery tongue into the groove of the chassis of the radio.2. Secure the latch at the bottom of the radio.1. Unlatch the battery clasp at the bottom of the radio.2. Gently lift the hilt of the battery nearest to the battery latch away from the housing.3. Slide battery downwards to remove.Attaching and Removing the Belt ClipTo Attach Belt ClipTo Remove Belt Clip1. Align mounting rails of the radio with the grooves of the belt clip.2. Slide the belt clip downwards until it clicks into place.1. Lift the release tab.2. Slide the belt clip upwards.Release TabCharging your Radio1. Turn off your radio and the A/C power sup-ply to your charger (if they are turned on).2. Place your radio in the charger pocket.3. Turn on the charger’s A/C power supply.4. While charging your radio, the charger’s LED shows a steady red light. The radio should be charged at least 16 hours initially before decreasing charging time to 12 hours.5. Turn off the charger’s A/C power supply, and remove the radio from the charger pocket.6. For more details, refer to the Charger Manual (6881013Y27).Charger Pocket
LED IndicatorsColour State IndicationRed Illuminated Radio is transmitting.Blinking Battery voltage is low.Green Illuminated Radio is receiving with PL/DPL disabled.Blinking Radio is in active scanning mode.Orange Illuminated Radio is receiving with PL/DPL enabled.Blinking An error has occured.On/Off and Volume Knob• Turn clockwise to turn radio ON and increase volume.• Turn counter-clockwise to decrease volume and turn radio OFF.Push-to-Talk (PTT) button• Press to transmit and release to receive messages.Speaker• Where received messages are heard.Microphone• Speak into microphone when send-ing message.Accessory Connector• To connect compatible acces-sories to radio.Programming Port• To program the radio.Accessories*Caution: Your radio does not support the VOX feature. Please set the accessory switch to ‘PTT’. If the accessory switch is set to ‘VOX’, your radio transmits constantly and never receives. Types Part No. DescriptionPMAD4050_R Mag One 136-150MHz AntennaAntenna PMAD4051_R Mag One 150-174MHz Antenna PMAE4019_R Mag One 403-425MHz AntennaPMAE4020_R Mag One 450-470MHz AntennaAudio Accessory PMMN4008_ Remote Speaker MicrophonePMLN4442_ Earbud with in-line mic and PTT/VOX* SwitchPMLN4443_ Ear Receiver with in-line mic and PTT/VOX* SwitchPMLN4445_ Ultra Lightweight Headset with In-line PTT/VOX* SwitchPMLN4294_ Earbud with Microphone & PTT CombinedPMLN4605_ Clear Acoustic KitPMLN4606_ 2-Wire Surveillance Kit with Clear Acoustic TubePMLN4658 _ D-shell Earset with Boom Mic with PTT/VOX* SwitchBattery PMNN4071_R Mag One NiMH batt 1200mAHCarry Accessory PMLN4743_ Mag One Spring Belt ClipPMLN4691_R Mag One Belt ClipPMLN4741_ Mag One Soft Leather Carry CasePMLN4742_ Mag One Hard Leather Carry CaseCharger PMLN4685_R Mag One Mid-rate Charger Base OnlyPMLN4738_R Mag One Mid-rate Charger Kit, 120 VPMLN4682_R Mag One Slow Charger Base OnlyPMLN4683_R Mag One Slow Charger Kit, 120 VPMLN4829_R Mag One Mid-rate Transformer, 120 VPMLN4822_R Mag One Slow Transformer, 120 VChannel Knob• Turn knob to change channel.Programmable Buttons• Frequently used features can be programmed here.LED Indicator• Colors indicate various states of the radioProgrammable Buttons• The following functions can be assigned as short press (press and release) or long press (press and hold for 1 second) in the programmable buttons.† In Chirp Tone* Out Chirp Tone• Your radio’s default functions are described below. If re-programmed, enter the new functions .Button FunctionHigh/Low Power Selects desired power level to High† or Low*.Volume Set Allows you to check the audio and alert tone volume level.Monitor Allows you to monitor the current channel for activity; disables squelch.Sticky Monitor*The radio monitors continually until you press this button again.Scan Starts* or Stops† channel scan.Nuisance Channel Delete†Removes unwanted channel(s) temporarily from scan list during scan.Repeater/Talkaround Toggles radio between functioning in Repeater mode† or Talkaround mode*.PL/DPL Enables†/Disables* radio from requiring matching PL/DPL to receive messages.Button Lock Locks* or unlocks† all buttons except PTT, Channel Knob and On/Off/Volume Knob.Battery Save Mode Toggles between functioning with Battery Saver ON* or Battery Saver OFF†.Squelch Selects desired squelch level: Normal† or Tight*.No Operation No function is programmed to this button.Press Type Programmable Button 1 Programmable Button 2Default Re-programmed Default Re-programmedShort Press Monitor ScanLong Press Sticky Monitor Nuisance Channel DeleteAudio Alert TonesTone Name Tone Cadence DescriptionIn Chirp Tone Programmable buttons are pressed.Out Chirp Tone Programmable buttons are pressed.Bad Key Chirp ToneInvalid programmable button function (i.e. pressing programmable button while button lock is activated.)Talk Prohibit ToneContinuous tone is heard if PTT is pressed when transmit is not allowed.Low Battery Alert ToneRepeating tone heard if battery level is low.Priority Channel Alert ToneReceived priority channel in Priority Scan mode.Low Tone High Tone

Navigation menu