Motorola Solutions 89FT4831 Hand Held Portable Radio User Manual Instruction Manual

Motorola Solutions, Inc. Hand Held Portable Radio Instruction Manual

Instruction Manual

FCC ID: AZ489FT4831INSTRUCTION MANUAL X Preliminary Manual attached. Complete Manual attached.
FCC ID: AZ489FT4831EXHIBIT 8FCC Licensing InformationYour Motorola radio operates on FM radio communication frequencies and is subject to theRules and Regulations of the Federal Communications Commission (FCC). The FCC requiresthat all operators using Private Land Mobile frequencies obtain a radio license before operatingtheir equipment. Application for your FCC license is made on FCC Form 600 and schedules D,E, and G.To have the forms faxed to you by the FCC, call the FCC Fax-On-Demand system at1-202-418-0177 from your fax machine and request document 000600 for all forms andinstructions.To have the forms mailed to you, call the FCC forms hotline at : 1-800-418-FORM.For questions concerning the license application, contact the FCC at : 1-888-Call-FCC (or 1-888-225-5322)Before filling out your application, you must first determine your radio frequency. Radiofrequency can be determined by first identifying the frequency number the radio is set to and thenmatching the number to the corresponding frequency in the Frequency Tables. See page ... and ...of this manual for additional information.For questions on determining your radio frequency, please call : 1-800-448-6686Copyright InformationThe Motorola products described in this manual may include copyrighted Motorola programsstored in semiconductor memories or other media. Laws in the United States and other countriespreserve for Motorola, certain exclusive rights for copyrighted computer programs, including theexclusive right to copy or reproduce in any form, the copyrighted Motorola programs.Accordingly, any copyrighted Motorola computer programs contained in the Motorola productsdescribed in this manual may not be copied or reproduced in any manner without the expresswritten permission of Motorola. Furthermore, the purchase of Motorola products shall not bedeemed to grant either directly or by implication, estoppel, or otherwise, any license under thecopyrights, patents or patent applications of Motorola, except for the normal non-exclusiveroyalty free license to use that arises by operation of law in the sale of a product.Getting StartedThank you for purchasing a Motorola Spirit radio. Your radio is a product of Motorola’s 50years of experience as a world leader in the designing and manufacturing of communicationsequipment. With proper care and use, your Motorola radio should give you years of reliablecommunication.Contents of Package :• Radio • NiCd Battery Pack • Optional: Charger Tray• Belt Clip • 10 Hour Charger Adapter
FCC ID: AZ489FT4831• Antenna • Operator Manual
FCC ID: AZ489FT4831 Batteries CAUTION Do not remove the plastic wrap from the battery pack. This may permanently damage the battery. The Ni-Cd battery ships uncharged, it must be fully charged for 16 hours before use (first chargeonly). It is recommended that only Motorola batteries and chargers are used with the radio. The Ni-Cd rechargeable battery pack will provide approximately 8 hours of use on a 2 watt radioand 10 hours on a 1 watt radio with normal use i.e. 5% sending messages, 5% receiving messagesand 90% in standby mode. To Install/Remove battery : Note : Radio must be in OFF position before installing/removing battery. 1. Push back battery cover latches until you see the orange tabs. 2. Slide battery cover down and lift to remove. 3. To replace/install battery, insert the battery pack with arrows facing you and towards top ofradio.. 4. Replace the battery cover and lock latches. 5. To remove battery: remove cover (steps 1 & 2), turn the radio over and tap the battery end ofthe radio against the palm of your hand. The battery will drop into your hand. Charging the Ni-Cd battery Pack Charging Adapter Instructions : 1. Turn the radio off. 2. Lift accessory cover and plug the Charger Adapter firmly into the small jack (lower hole). 3. Plug the Charger into an electric outlet. The red light on the charger will glow continuously if charging properly. 4. Allow 10 hours for the battery to fully charge. NOTE: For optimum battery life, the battery should not be left charging for prolonged periodsafter reaching full charge. Charging the battery over the weekend is acceptable. NOTE: Transmitting while radio is charging in the Wall Charger can cause the radio transmitteror the charger to operate improperly. Do not transmit while radio is charging. If radio is on whilecharging, at least twice as much time is required to charge the battery. Turn the radio off whencharging. 10 Hour Desktop Charger Instructions : 1. Connect Desktop Charger and Charger Adapter. 2. Charge the battery while inside the radio by placing the radio in the Charger Tray withradio facing towards you. You can also charge the battery by removing battery from radioand placing it in Charger Tray with silver contacts facing down and arrow facing towardthe front.
FCC ID: AZ489FT4831 3. The LED light on top of the charger will glow red continuously when radio / battery isinserted in charger. If light does not come on, check radio / battery is properly insertedand check battery/ charger contacts to be sure they are clean. The red LED will continueto glow until the radio / battery is removed from Charger Tray. 4. Allow 10 hours for the battery to fully charge. Note: The Desktop Charger is optional and may not be included in your package. Formore information, please contact your place of purchase or call 1-800-448-6686. Low Battery Alert: When the battery is low, the radio will beep 3 to 4 seconds after turning power on, every 10minutes, and after release of the Push-To-Talk button. Recharge the battery pack immediately toavoid interrupted use. Note: Remove battery pack before storing your radio for extended periods. Batteries corrode overtime and may cause permanent damage to your radio. Antenna To attach the antenna, rotate the antenna clockwise onto the top of the radio until hand tight. Note: The antenna should always be installed when operating the radio. Operating the radiowithout an antenna greatly reduces the range of the radio and causes battery to get used morequickly. Belt Clip Spirit radios come standard with a belt clip. To Attach / Remove: 1. Align the belt clip to the mounting rails on the back of the radio 2. Push the belt clip down until it clicks into place. 3. To remove, pull tab on belt clip away from radio to release. 4. Slide belt clip up and off. Before You Can Talk Please read this manual carefully to ensure you know how to properly operate the radio beforeuse. There are default settings programmed into your radio for Frequency per Channel, InterferenceEliminator Code and Bandwidth. If it is necessary to change these default settings, the radio willaudibly guide you through a series of programming steps.
FCC ID: AZ489FT4831 Change Frequency, Code and Band: 1 channel models 1 While holding down Push-To-Talk button, turn radio on. The radio will announce theFrequency your radio is set to. See Frequency chart below for details 2. Press the Push-To-Talk button repeatedly or hold down to here Frequencychoices. 3. Select and save your chosen frequency by pressing the monitor button. You are now in the Code change mode. The radio will announce the Code the radio is set to. 4. Press Push-To-Talk repeatedly or hold down to hear Code choices. See InterferenceEliminator Table below for details. 5. Select and save your chosen Code by pressing the monitor button. You are now in Band change mode. The radio will announce Band 25 as the currentsetting. 6. Press monitor button to save this Band setting 7. Radio is now ready to use. 2 and 4 channel models 1 While holding Push-To-Talk button down, turn radio on. The radio will announcethe Frequency of the channel your Channel Selector Knob is set to. See Frequencychart below for details. 2. Press the Push-To-Talk button repeatedly or hold down to hear Frequency choices. 3. Once you have reached your chosen Frequency, move your Channel Selector Knob tothe next channel and the radio will announce the Frequency of this channel. Repeatstep 2 until you reach your desired frequency. For 4 Channel radios, repeat steps 2 and3 for the remaining channels. 4. When you have selected the frequency for each channel you wanted to change, pressmonitor button to save your selections. You are now in the Code change mode. The radio will announce the Code the radio is set to. 5. Press Push-To-Talk repeatedly or hold down to hear Code choices. See InterferenceEliminator Table below for details. 7. Select and save your chosen Code by pressing the monitor button. You are now in Band change mode. The radio will announce Band 25 as the currentsetting. 6. Press monitor button to save this Band setting 7. Radio is now ready to use.
FCC ID: AZ489FT4831 Things to Note :• Interference Eliminator Code: Codes filter out static, noise and unwanted chatter on radiochannels. You can only communicate with radios using the same channel and code. This willnot make your conversations private as other users with uncoded radios will hear you. If thechannel you are using is busy, change to another channel. For compatibility with radios thatdo not have the Interference Eliminator Code feature, the radio can be set to “Code Off”mode.• Bandwidth : In the USA, the FCC is allocating new frequencies to the business radioservice. All these future frequencies must operate on 12.5kHz Bandwidth. All frequenciescurrently available for Business Radio use operate on 25kHz Bandwidth. All M-Series radioswill ship with Band 25 as default but will have the capability to upgrade to Band 12.5 towork with next generations of business radio. This gives users the flexibility to add to theirradio fleet in the future without changing out their complete radio system. FOR ALL M SERIES RADIOS, ENSURE YOU SET YOUR RADIO TO BAND 25kHz.• To talk to others in your group, the radios must be set to the same channel and code (seeTables below for complete list).• If you do not want to change frequencies on each channel, then push the monitor button afteryou have changed the positions you need and the radio will then go into code change mode.• No programming is required for the “S” position on your Channel Selector Knob. Onlyselect models have “S” position.• Code numbers that have two digit (10-38) will be announced as “one zero”...”one one”... etc.• You cannot transmit when you are in change Frequency, Code or Band mode.• Code and Band settings apply to all channels. Frequency Tables UHF Models (Model number begins with MU) FrequencyNumber Frequency MHz Color * 1 464.5500 Yellow * 2 467.7625 J * 3 467.9250 Blue Star * 4 467.8500 Silver Star 5 464.5000 Brown 6 467.8750 Gold Star 7 467.9000 Red Star 8 467.8125 K
FCC ID: AZ489FT4831 VHF Models (Model number begins with MV) FrequencyNumber Frequency MHz Color * 1 154.5700 Blue * 2 154.6000 Green * 3 151.6250 Red * 4 151.9550 Purple • Radios ship to users with default frequencies.• For 1 channel models, radio ships with Frequency 1• For 2 Channel models, radio ships with Frequencies 1 & 2• For 4 Channel models, radio ships with Frequencies 1, 2, 3 & 4
FCC ID: AZ489FT4831 Interference Eliminator Table : M-Series Non M-Series Switch Position Code # Code Frequency (Hz) S1 S2 S3 S4 S5 S6 S7 S8 1 XZ 67.0 D D D D D D U U 2 XA 71.9 U D D D D D U U 3 WA 74.4 D D D D D U U U 4 XB 77.0 U U D D D D U U 5 WB 79.7 D D D D U D U U 6 YZ 82.5 U D D D D U U U 7 YA 85.4 D D D D U U U U 8 YB 88.5 U U D D D U U U 9 ZZ 91.5 D D D U D D U U 10 ZA 94.8 U D D D U D U U 11 ZB 97.4 D D D U D U U U 12 1Z 100.0 U U D D U D U U 13 1A 103.5 U D D D U U U U 14 1B 107.2 U U D D U U U U 15 2Z 110.9 U D D U D D U U 16 2A 114.8 U U D U D D U U 17 2B 118.8 U D D U D U U U 18 3Z 123.0 U U D U D U U U 19 3A 127.3 U D D U U D U U 20 3B 131.8 U U D U U D U U 21 4Z 136.5 U D D U U U U U 22 4A 141.3 U U D U U U U U 23 4B 146.2 U D U D D D U U 24 5Z 151.4 U U U D D D U U 25 5A 156.7 U D U D D U U U 26 5B 162.2 U U U D D U U U 27 6Z 167.9 U D U D U D U U 28 6A 173.8 U U U D U D U U 29 6B 179.9 U D U D U U U U 30 7Z 186.2 U U U D U U U U 31 7A 192.8 U D U U D D U U 32 M1 203.5 U U U U D D U U 33 M2 210.7 U D U U D U U U 34 M3 218.1 U U U U D U U U 35 M4 225.7 U D U U U D U U 36 M5 233.6 U U U U U D U U 37 M6 241.8 U D U U U U U U 38 M7 250.3 U U U U U U U U
FCC ID: AZ489FT4831 OFF None None X X X X X X X D NOTE : All radios ship on Code # 29 (6B) as default To Use Your Radio Turn The Radio On/Off : Turn the volume/on/off knob clockwise. You will hear a beep and see the red LED flashmomentarily to indicate the radio is on. To turn the radio off, turn the volume/on/off knobcounterclockwise. You will hear a click to indicate the radio is turned off. Adjust The Volume: Hold Monitor button down to listen to audio level while rotating Volume knob. Rotate dialclockwise to increase and counter clockwise to decrease volume. To Send and Receive messages: Check channel activity by pressing Monitor button. You will hear static if the channel is clear touse. Do not transmit if someone is talking on channel. 1. To send a message, press the Push-To-Talk and speak into the radio. (To maximize clarity,hold radio 3 to 5 inches from mouth). 2. The red LED Indicator Light will glow continuously when sending messages. 3. To listen for messages, release the Push-To-Talk button. Time-out Timer: The Time-out Timer feature helps extend battery life. The radio will emit a warning tone if thePush-To-Talk button is pressed for 2 continuous minutes and will stop transmitting. Hands-Free Use (Optional Feature) Built-in Voice Activated Transmission (VOX) allows you hands free operation of your radio.The sound of your voice activates transmission when the radio is used with a Headset WithSwivel Boom Mic (HMN9038) or Earpiece with Microphone (HMN9039) (Both headset andearpiece are sold separately). To Use VOX Feature: 1. Turn the radio off. 2. Open accessory connector cover and plug the accessory’s connector into jack. 3. Turn radio on and lower volume before placing accessory on head or in ear. Press Monitor button while rotating Volume Knob to adjust volume to a comfortablelistening level. 4. To transmit, speak into accessory microphone. To receive, stop talking. Note: There will be a brief delay between when you start or stop talking and radiotransmission.
FCC ID: AZ489FT4831 Exit VOX mode: Press Push-To-Talk button once. To transmit, press Push-To-Talk button on radio. To receive, release the Push-To-Talk. To return to VOX mode, turn the radio off, then on again. Note: The accessory jack cover is not detachable and should be closed when not in use. Scan (Optional Feature) Some M Series models have scan. Scan allows the user to monitor two or more channels foractivity, so you will not miss any messages. To scan : 1. Move Channel Selector Knob to scan “S” position. The radio will scan the radio’s programmed channels. If there are any transmissions on anyof the channels, the radio will switch to that channel and you will receive the message. 2. You can transmit back to last channel that you received a message from by pressing the Push-To-Talk button within 5 seconds of message being received. If you do not want to reply tothe message, the radio will go back to Scan mode after 5 seconds. While in Scan mode, if you press the Push-To-Talk button before the radio picks up anyactivity on a channel, you will transmit on Channel 1. Care and Safety 1. Don’t use cleaners or solvents on the radio, they can harm the body and leak inside, causingpermanent damage. 2. Battery contacts may be wiped with a dry, lint-free cloth. 3. To clean the radio, wipe with a soft cloth dampened with water. If the radio gets wet, turn it off and remove batteries immediately. Dry battery compartment witha soft cloth to minimize potential water damage. If possible, leave cover off the batterycompartment overnight or until completely dry.
FCC ID: AZ489FT4831 Troubleshooting Problem Solution Radio is dead Reposition or charge battery pack. Battery does not charge If Charger Tray is used, make sure battery is positioned properly. See page xx. If using Charger Adapter, make sure the red LED on the adapter glows indicating correctcharging status. Radio should be turned off when using Charger Adapter. Charge time willbe longer if radio is left on. Message not Transmitted Make sure the Push-To-Talk button is completely pressed as you transmit. Reposition or charge battery pack. Message not Received Confirm radios have the same Channel and Interference Eliminator Code settings. Make sure Push-To-Talk is not inadvertently being pressed. Obstructions, operating indoors or in vehicles may interfere with communication. Changeyour location. Check to make sure volume is turned up. Hearing Other Conversations Check that your Interference Eliminator or noise on radio Code is set (Active settings are 1 - 38) Other users may be using channel - change channel to avoid congestion. Limited Talk Range Steel/concrete structures, heavy foliage and use in buildings and in vehicles will decreaserange, check for clear line of sight to improve transmission. Wearing radio close to body such as in a pocket or on a belt will decrease range, changelocation of radio.
FCC ID: AZ489FT4831 Heavy Static or interference Radios too close. Radios must be at least 5 feet apart. Increase your distance apart. Radios too far apart. Obstacles interfere with transmission. Talk range is up to two miles inclear unobstructed conditions. If the radio still doesn’t work properly contact your place of purchase or call Motorola productservices at 1800-448-6686 Battery / Charger Safety Information : WARNING Do not replace or recharge batteries in a hazardous atmosphere. Sparking may occur whileinstalling or removing batteries from the radio and chargers which could trigger an explosion. Charge batteries at about 77°F. Charging in cold temperatures (below 45°F) can result inelectrolyte leakage and destroy the battery. Charging in hot temperatures (above 95°F) does notdamage the battery, but reduced charge capacity will result. WARNING Do not dispose of batteries in fire. This could create a fire or explosion hazard. Also, improperuse of batteries may create a fire or explosion. CAUTION• To reduce risk of damage to electric plug and cord, pull by the plug rather than the cord whendisconnecting the charger.• Make sure cord is located so that it will not be stepped on, tripped over, or otherwisesubjected to damage or stress.• Do not operate charger with damaged cord or plug, replace them immediately. Do not operatecharger if it has received a sharp blow, been dropped, or otherwise damaged in any way;contact place of purchase or call 1-800-448-6686.• Do not expose chargers to rain or snow.
FCC ID: AZ489FT4831 CAUTION An extension cord should not be used unless absolutely necessary. Use of an improper extensioncord may result in a fire or electric shock. However, if an extension cord must be used, makesure:• That pins and plug of extension cord are the same number, size and shape as those on theplug of the charger.• That extension cord is properly wired and in good condition.• That cord size is 18AWG for lengths of up to 100 feet, and 16AWG for lengths up to 150feet. CAUTION• Do not disassemble charger; contact place of purchase or call 1-800-448-6686 if charger isnot functioning. Incorrect reassembly can result in electric shock or fire.• To reduce risk of injury, charge only Motorola Ni-Cd rechargeable batteries. Other types ofbatteries may burst, causing personal injury and damage.• Use of an attachment not sold or recommended by Motorola can result in a risk of fire,electric shock, or injury to personnel.• To reduce risk of electric shock, unplug charger from outlet before cleaning. Turning offcontrols does NOT reduce this risk.
FCC ID: AZ489FT4831 INFORMATION FOR SAFE, EFFICIENT OPERATION EXPOSURE TO RADIO FREQUENCY ENERGY In August 1996 the Federal Communications Commission (FCC) adopted updated RF energyexposure guidelines for wireless products regulated by the FCC. Those guidelines are consistentwith the safety standards* previously set by both U.S. and international standards bodies. Thedesign of your Motorola two-way radio complies with the FCC guidelines and these standards.• American National Standards Institute (C95.1 - 1992);• National Council on Radiation Protection and Measurements (NCRP-1986);• International Commission on Non-Ionizing Radiation Protection (ICNRP- 1986) To assure optimal radio performance and to insure that exposure to RF energy is within theguidelines in the above standards, the following operating procedures should be observed: FOR PORTABLE TWO-WAY RADIOS• For hand held operation, the radio should be held in a vertical position with the microphoneone to two inches away from the mouth, and the antenna should be kept one to two inchesfrom the head or body when transmitting.• For body worn operation, the antenna should be kept at least one inch from the body whentransmitting. ELECTROMAGNETIC INTERFERENCE/COMPATIBILITY Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed or otherwise configured for electromagnetic compatibility. • Turn your radio OFF in any facilities where posted notices instruct you to do so.Hospitals or health care facilities may be using equipment that could be sensitive toexternal RF energy.• Turn your radio off when on board aircraft when instructed to do so. Any use of the radiomust be in accordance with Federal Aviation Administration (FAA) and FCC regulationsor crew instructions. ====================================== CAUTION (use appropriate ANSI symbol)• Do not use the radio with a damaged antenna. If a damaged antenna comes into contact withthe skin, a minor burn may result.
FCC ID: AZ489FT4831• All batteries can cause property damage, injury or burns if a conductive material such asjewelry, keys or beaded chains touches exposed terminals. The material may complete anelectrical circuit (short circuit) and become quite hot. Exercise care in handling any chargedbattery, particularly when placing it inside a pocket, purse or other container with metalobjects. ============================================================ WARNING (use appropriate ANSI symbol) POTENTIALLY EXPLOSIVE ATMOSPHERES• Turn your radio OFF when in any area with a potentially explosive atmosphere, unless it is atype especially qualified for such use (for example, FMRC Approved)... Sparks in such areascould cause an explosion or fire resulting in bodily injury or even death.• Do not replace or charge batteries in a hazardous atmosphere. Contact sparking may occurwhile installing or removing batteries and cause an explosion. Areas with potentially explosive atmospheres are often, but not always, clearly marked. Theyinclude fueling areas such as below deck on boats, fuel or chemical transfer or storage facilities;areas where the air contains chemicals or particles, such as grain, dust, or metal powders; and anyother area where you would normally be advised to turn off your vehicle engine. WARNING (use appropriate ANSI symbol) BLASTING CAPS AND AREAS• To avoid possible interference with blasting operations, turn your radio OFF near electricalblasting caps or in a “blasting area” or in areas posted: “Turn off two-way radio” . Obey allsigns and instructions. WARNING (use appropriate ANSI symbol) FOR VEHICLES WITH AN AIR BAG• An air bag inflates with great force. Do not place objects, including portable or mobile two-way radios, in the area over the air bag or in the air bag deployment area. If improperlyinstalled or placed wireless equipment is in the air bag deployment area and the air baginflates, serious injury could result.=============================================================ImportantDo not depress Push-To-Talk button unless you are transmittingImportantDo not allow children to play with any radio equipment containing a transmitter.
FCC ID: AZ489FT4831WARRANTYThis warranty applies within the fifty (50) United States and the District of Columbia.LIMITED WARRANTYMOTOROLA COMMUNICATION PRODUCTSI. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:MOTOROLA INC. (“MOTOROLA”) warrants the MOTOROLA products listed below in theproduct warranty schedule section of this warranty document (“Product”) against defects inmaterial and workmanship under normal use and service for a period of time from the date ofpurchase as scheduled below:MOTOROLA, at its option, will, at no charge, either repair the Product (with new orreconditioned parts), replace it (with a new or reconditioned Product), or refund the purchaseprice of the Product during the warranty period provided it is returned in accordance with theterms of this warranty. Replaced parts or boards are warranted for the balance of the originalapplicable warranty period. All replaced parts of Product shall become the property ofMOTOROLA.This express limited warranty is extended by MOTOROLA to the original end user purchaseronly and is not assignable or transferable to any other party. This is the complete warranty for theProduct manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability foradditions or modifications to this warranty unless made in writing and signed by an officer ofMOTOROLA. Unless made in a separate agreement between MOTOROLA and the original enduser purchaser, MOTOROLA does not warrant the installation, maintenance or service of theProduct.MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished byMOTOROLA which is attached to or used in connection with the Product, or for operation of theProduct with any ancillary equipment, and all such equipment is expressly excluded from thiswarranty. Because each system which may use the Product is unique, MOTOROLA disclaimsliability for range, coverage, or operation of the system as a whole under this warranty.II. GENERAL PROVISIONS:This warranty sets forth the full extent of MOTOROLA’s responsibilities regarding the Product.Repair, replacement or refund of the purchase price, at MOTOROLA’S option, is the exclusiveremedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES.IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIESOF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITEDTO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALLMOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OFTHE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE,COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIALOR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USESUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW.
FCC ID: AZ489FT4831III. STATE LAW RIGHTS:SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTALOR CONSEQUENTIAL DAMAGES, OR LIMITATION ON HOW LONG AN IMPLIEDWARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOTAPPLY.This warranty gives specific legal rights, and there may be other rights which may vary from stateto state.IV. HOW TO GET WARRANTY SERVICE:To receive warranty service, deliver or send the Product item, transportation and insuranceprepaid, to the place of purchase along with your proof of purchase or lease and Product itemserial number. Alternatively call 1-800-448-6686 for other locations.V. WHAT THIS WARRANTY DOES NOT COVER:a) Defects or damage resulting from use of the Product in other than its normal and customary manner.b) Defects or damage from misuse, accident, liquid, or neglect.c) Defects or damage from improper testing, operation, maintenance, installation, alteration, modification,or adjustment.d) Breakage or damage to antennas unless caused directly by defects in material workmanship.e) A Product subjected to unauthorized Product modifications, disassemblies or repairs (including, withoutlimitation, the addition to the Product of non-Motorola supplied equipment) which adversely affectperformance of the Product or interfere with Motorola’s normal warranty inspection and testing of theProduct to verify any warranty claim.f) Product which has had the serial number removed or made illegible.g) Rechargeable batteries if:1) any of the seals on the battery enclosure of cells are broken or show evidence of tampering.2) the damage or defect is caused by charging or using the battery in equipment or service otherthan the Product for which it is specified.h) Freight costs to the repair depot.i) A Product which, due to illegal or unauthorized alteration of the software/firmware in the Product, doesnot function in accordance with Motorola’s published specifications or the FCC type acceptance labeling ineffect for the Product at the time the Product was initially distributed from Motorola.j) Scratches or other cosmetic damage to Product surfaces that does not effect the operation of the Product.k) Normal and customary wear and tear.
FCC ID: AZ489FT4831VI. PATENT AND SOFTWARE PROVISIONS:MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser tothe extent that it is based on a claim that the Product or parts infringe a United States patent, andMOTOROLA will pay those costs and damages finally awarded against the end user purchaser inany such suit which are attributable to any such claim, but such defense and payments areconditioned on the following:a) that MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim;b) that MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement orcompromise; andc) should the Product or parts become, or in MOTOROLA’s opinion be likely to become, the subject of aclaim of infringement of a Unites States patent, that such purchaser will permit MOTOROLA, at its option andexpense, either to procure for such purchaser the right to continue using the Product or parts or to replaceor modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product orparts as depreciated and accept its return. The depreciation will be an equal amount per year over thelifetime of the Product or parts as established by MOTOROLA.MOTOROLA will have no liability with respect to any claim of patent infringement which isbased upon the combination of the Product or parts furnished hereunder with software, apparatusor devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use ofancillary equipment or software not furnished by MOTOROLA which is attached to or used inconnection with the Product. The foregoing states the entire liability of MOTOROLA withrespect to infringement of patents by the Product or any parts thereof.Laws in the United States and other countries preserve for MOTOROLA certain exclusive rightsfor copyrighted MOTOROLA software such as the exclusive rights to reproduce in copies anddistribute copies of such Motorola software. MOTOROLA software may be used in only theProduct in which the software was originally embodied and such software in such Product maynot be replaced, copied, distributed, modified in any way, or used to produce any derivativethereof. No other use including, without limitation, alteration, modification, reproduction,distribution, or reverse engineering of such MOTOROLA software or exercise of rights in suchMOTOROLA software is permitted. No license is granted by implication, estoppel or otherwiseunder MOTOROLA patent rights or copyrights.VII. PRODUCT WARRANTY SCHEDULE:Spirit Radios:One (1) yearSpirit Accessories: One (1) year.Rechargeable Batteries will be replaced during the applicable warranty period if:a) the battery capacity falls below 80% of rated battery capacity or,b) the battery develops leakage.EXHIBIT 8

Navigation menu