Motorola Mobility T6GG1 Portable PCS GSM Transceiver with Bluetooth User Manual Brit02 EN

Motorola Mobility LLC Portable PCS GSM Transceiver with Bluetooth Brit02 EN

Contents

Exhibit 8 Users Manual

motorola.comBrit02Brit02_EN.book Page 1 Thursday, February 23, 2006 5:02 PM
2www.motorola.comCertain mobile phone features are dependent on the capabilities and settings of your service provider’s network. Additionally, certain features may not be activated by your service provider, and/or the provider's network settings may limit the feature’s functionality. Always contact your service provider about feature availability and functionality. All features, functionality, and other product specifications, as well as the information contained in this user's guide are based upon the latest available information and are believed to be accurate at the time of printing. Motorola reserves the right to change or modify any information or specifications without notice or obligation.MOTOROLA and the Stylised M Logo are registered in the US Patent & Trademark Office. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under licence. Java and all other Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. All other product or service names are the property of their respective owners.© Motorola, Inc. 2006.The information contained in Motorola’s user’s guides is believed to be correct at the time of printing. Motorola reserves the right to change or modify any information or specifications without notice. The contents of Motorola’s user’s guides are provided “as is.” Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability, or contents of this guide.Caution: Changes or modifications made in the radio phone, not expressly approved by Motorola, will void the user’s authority to operate the equipment.While Products specifications and features may be subject to change without notice, we are making every possible effort to ensure that user manuals are updated on a regular basis to reflect product functionality revisions. However, in the unlikely event that your manual version does not fully reflect the core functionality of your product, please let us know. You may also be able to access up-to-date versions of our manuals in the consumer section of our Motorola web site, at http://www.motorola.com.Brit02_EN.book Page 2 Thursday, February 23, 2006 5:02 PM
3ContentsContentsSafety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Use and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14EU Conformance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Recycling Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Using this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Preparing the phone for operation . . . . . . . . . . . . . . . . . 23Basic operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Diary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Currency converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Using your phone as a modem . . . . . . . . . . . . . . . . . . . 45Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47Reading a received SMS message . . . . . . . . . . . . . . . . 47Reading stored SMS messages . . . . . . . . . . . . . . . . . . 48Moving messages to SIM . . . . . . . . . . . . . . . . . . . . . . . 48Forwarding messages . . . . . . . . . . . . . . . . . . . . . . . . . . 49Activating or deactivating the message alert tone . . . . . 50Preparing the phone to send SMS messages . . . . . . . . 51Entering text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52Creating text models . . . . . . . . . . . . . . . . . . . . . . . . . . . 57Editing a text model . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Sending a new SMS message . . . . . . . . . . . . . . . . . . . . 58Signature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Brit02_EN.book Page 3 Thursday, February 23, 2006 5:02 PM
4ContentsOutbox and SIM archive emitted messages . . . . . . . . . 60Status request . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61Storage consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . 62Broadcast - cell broadcast (CB) messages . . . . . . . . . . . 63Calls & times . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67Calls log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67Call timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68Call costs - management . . . . . . . . . . . . . . . . . . . . . . . . 71Recorded call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Storing names and telephone numbers . . . . . . . . . . . . . 75Editing a phonebook or a SIM name card . . . . . . . . . . . 80Viewing and calling phonebook numbers . . . . . . . . . . . . 81Voice dialling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83Free space in the phonebook . . . . . . . . . . . . . . . . . . . . . 84Creating a Category of cards . . . . . . . . . . . . . . . . . . . . . 85My card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87My number(s) display . . . . . . . . . . . . . . . . . . . . . . . . . . . 88Fixed dialling numbers . . . . . . . . . . . . . . . . . . . . . . . . . . 88Export . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91Taking a picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91Adjusting your picture . . . . . . . . . . . . . . . . . . . . . . . . . . 94Storing/erasing your picture . . . . . . . . . . . . . . . . . . . . . . 96Self timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96Fun & media box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97Melodies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101Games & applications . . . . . . . . . . . . . . . . . . . . . . . . . 104Speech notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106Brit02_EN.book Page 4 Thursday, February 23, 2006 5:02 PM
5ContentsOthers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107Storage used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111Network services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112i-mode™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113User interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113i-mode menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114i-mode applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 116Mail system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122Mail system settings . . . . . . . . . . . . . . . . . . . . . . . . . . 133Quick access to i-mode basic features . . . . . . . . . . . . 137Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146Voice mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148Phone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150GSM services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154Security features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163SAR Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168WHO Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174Trouble shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176Error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186Brit02_EN.book Page 5 Thursday, February 23, 2006 5:02 PM
6Safety InformationSafety and General InformationSafety InformationIMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR PHONE.1Exposure To Radio Frequency (RF) EnergyYour phone contains a transmitter and a receiver. When it is ON, it receives and transmits RF energy. When you communicate with your phone, the system handling your call controls the power level at which your phone transmits.Your Motorola phone is designed to comply with local regulatory requirements in your country concerning exposure of human beings to RF energy.Operational PrecautionsTo assure optimal phone performance and make sure human exposure to RF energy is within the guidelines set forth in the relevant standards, always adhere to the following instructions.External Antenna CareIf your phone has an external antenna, use only the supplied or Motorola-approved replacement antenna. Unauthorised antennas, modifications, or attachments could damage the phone and/or may result in non-compliance with local regulatory requirements in your country.Do NOT hold the external antenna when the phone is IN USE. Holding the external antenna affects call quality and may cause the phone to operate at a higher power level than needed.Phone OperationWhen placing or receiving a phone call, hold your phone as you would a wireline phone. Brit02_EN.book Page 6 Thursday, February 23, 2006 5:02 PM
7Safety InformationBody-Worn Operation: Voice CommunicationTo maintain compliance with RF energy exposure guidelines, if you wear a phone on your body when transmitting voice communications, always place the phone in a Motorola-supplied or approved clip, holder, holster, case, or body harness for this phone, if available. Use of accessories not approved by Motorola may exceed RF energy exposure guidelines. If you do not use one of the body-worn accessories approved or supplied by Motorola, and are not using the phone held in the normal use position, ensure the phone and its antenna are at least 2.5 centimetres (1 inch) from your body when transmitting.Data OperationWhen using any data feature of the phone, with or without an accessory cable, position the phone and its antenna at least 2.5 centimetres (1 inch) from your body.Approved AccessoriesUse of accessories not approved by Motorola, including but not limited to batteries, antennas, and convertible covers, may cause your phone to exceed RF energy exposure guidelines. For a list of approved Motorola accessories, visit our website at www.motorola.com.RF Energy Interference/CompatibilityNote: Nearly every electronic device is susceptible to RF energy interference from external sources if inadequately shielded, designed, or otherwise configured for RF energy compatibility. In some circumstances your phone may cause interference.Note: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Brit02_EN.book Page 7 Thursday, February 23, 2006 5:02 PM
8Safety InformationFacilitiesTurn off your phone in any facility where posted notices instruct you to do so. These facilities may include hospitals or health care facilities that may be using equipment that is sensitive to external RF energy.AircraftTurn off your wireless device whenever instructed to do so by airline staff. If your device offers a flight mode or similar feature, consult airline staff about use in flight. If your device offers a feature that automatically turns on the phone, then turn off this feature before boarding an aeroplane or entering an area where the use of wireless devices is restricted.Medical DevicesPacemakersPacemaker manufacturers recommend that a minimum separation of 15 centimetres (6 inches) be maintained between a handheld wireless phone and a pacemaker.Persons with pacemakers should:•ALWAYS keep the phone more than 15 centimetres (6 inches) from your pacemaker when the phone is turned ON.•NOT carry the phone in the breast pocket.•Use the ear opposite the pacemaker to minimise the potential for interference.•Turn OFF the phone immediately if you have any reason to suspect that interference is taking place.Hearing AidsSome digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives.Brit02_EN.book Page 8 Thursday, February 23, 2006 5:02 PM
9Safety InformationOther Medical DevicesIf you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your doctor may be able to assist you in obtaining this information.Use While DrivingCheck the laws and regulations on the use of phones in the area where you drive. Always obey them.When using your phone while driving, please:•Give full attention to driving and to the road. Using a phone may be distracting in certain circumstances. Discontinue a call if you can’t concentrate on driving.•Use handsfree operation, if available.•Pull off the road and park before making or answering a call if driving conditions so require.Responsible driving best practices can be found in the “Wireless Phone Safety Tips” at the end of this guide and/or at the Motorola website: www.motorola.com/callsmart.Operational WarningsFor Vehicles With an Air BagDo not place a phone in the area over an air bag or in the air bag deployment area. Air bags inflate with great force. If a phone is placed in the air bag deployment area and the air bag inflates, the phone may be propelled with great force and cause serious injury to occupants of the vehicle.Brit02_EN.book Page 9 Thursday, February 23, 2006 5:02 PM
10Safety InformationGas or Petrol StationsObey all posted signs with respect to the use of radio equipment in gas or petrol stations. Turn off your wireless device if instructed by authorised staff.Potentially Explosive AtmospheresTurn off your phone prior to entering any area with a potentially explosive atmosphere. Do not remove, install, or charge batteries in such areas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death.Note: The areas with potentially explosive atmospheres referred to above include fuelling areas such as below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust, or metal powders. Areas with potentially explosive atmospheres are often but not always posted.Blasting Caps and AreasTo avoid possible interference with blasting operations, turn OFF your phone when you are near electrical blasting caps, in a blasting area, or in areas posted “Turn off electronic devices.” Obey all signs and instructions.Damaged ProductsIf your phone or battery has been submerged in water, punctured, or subjected to a severe fall, do not use it until you take it to a Motorola Authorised Service Centre to determine if it has been damaged. Do not attempt to dry it with an external heat source, such as a microwave oven.Brit02_EN.book Page 10 Thursday, February 23, 2006 5:02 PM
11Safety InformationBatteries and ChargersBatteries can cause property damage and/or bodily injury such as burns if a conductive material such as jewellery, keys, or beaded chains touch exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become hot. Take care when handling a charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects. Use only Motorola Original™ batteries and chargers.Caution: To avoid risk of personal injury, do not dispose of your battery in a fire.Your battery, charger, or phone may contain symbols, defined as follows:Choking HazardsYour phone or its accessories may include detachable parts, which may present a choking hazard to small children. Keep your phone and its accessories away from small children.Symbol DefinitionImportant safety information will follow.Your battery or phone should not be disposed of in a fire.Your battery or phone may require recycling in accordance with local laws. Contact your local regulatory authorities for more information.Your battery or phone should not be thrown in the trash.Your phone contains an internal lithium ion battery.032374o032376o032375o032377o032378oLi Ion BATTBrit02_EN.book Page 11 Thursday, February 23, 2006 5:02 PM
12Safety InformationGlass partsSome parts of your mobile device may be made of glass. This glass could break if the product is dropped on a hard surface or receives a substantial impact. If glass breaks, do not touch or attempt to remove. Stop using your mobile device until the glass is replaced by a qualified service centre.Seizures/BlackoutsSome people may be susceptible to epileptic seizures or blackouts when exposed to flashing lights, such as when watching television or playing video games. These seizures or blackouts may occur even if a person never had a previous seizure or blackout.If you have experienced seizures or blackouts, or if you have a family history of such occurrences, please consult your doctor before playing video games on your phone or enabling a flashing-lights feature on your phone (the flashing-light feature is not available on all products).Parents should monitor their children's use of video game or other features that incorporate flashing lights on the phones. All persons should discontinue use and consult a doctor if any of the following symptoms occur: convulsion, eye or muscle twitching, loss of awareness, involuntary movements, or disorientation.To limit the likelihood of such symptoms, please take the following safety precautions:•Do not play or use a flashing-lights feature if you are tired or need sleep.•Take a minimum of a 15-minute break hourly.•Play in a room in which all lights are on.•Play at the farthest distance possible from the screen.Brit02_EN.book Page 12 Thursday, February 23, 2006 5:02 PM
13Safety InformationRepetitive Motion InjuriesWhen you repetitively perform actions such as pressing keys or entering finger-written characters, you may experience occasional discomfort in your hands, arms, shoulders, neck, or other parts of your body. Follow these instructions to avoid problems such as tendonitis, carpal tunnel syndrome, or other musculoskeletal disorders:•Take a minimum 15-minute break every hour of game playing.•If your hands, wrists, or arms become tired or sore while playing, stop and rest for several hours before playing again.•If you continue to have sore hands, wrists, or arms during or after play, stop playing and see a doctor.1. The information provided in this document supersedes the general safety information in user’s guides published prior to January 28, 2005.Brit02_EN.book Page 13 Thursday, February 23, 2006 5:02 PM
14Use and CareUse and CareUse and CareTo care for your Motorola phone, please keep it away from:liquids of any kindDo not expose your phone to water, rain, extreme humidity, sweat, or other moisture.extreme heat or coldAvoid temperatures below -10°C/14°F or above 45°C/113°F.microwavesDo not try to dry your phone in a microwave oven.dust and dirtDo not expose your phone to dust, dirt, sand, food, or other inappropriate materials.cleaning solutionsTo clean your phone, use only a dry soft cloth. Do not use alcohol or other cleaning solutions.the groundDo not drop your phone.Brit02_EN.book Page 14 Thursday, February 23, 2006 5:02 PM
15EU ConformanceEuropean Union Directives Conformance StatementEU Confor manceHereby, Motorola declares that this product is in compliance with:•The essential requirements and other relevant provisions of Directive 1999/5/EC•All other relevant EU DirectivesThe above gives an example of a typical Product Approval Number.You can view your product’s Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www.motorola.com/rtte. To find your DoC, enter the product Approval Number from your product’s label in the “Search” bar on the Web site.0168 ProductApprovalNumberBrit02_EN.book Page 15 Thursday, February 23, 2006 5:02 PM
16Recycling InformationCaring for the Environment by RecyclingRecycling InformationWhen you see this symbol on a Motorola product, do not dispose of the product with household waste.Recycling Mobile Phones and AccessoriesDo not dispose of mobile phones or electrical accessories, such as chargers or headsets, with your household waste. In some countries or regions, collection systems are set up to handle electrical and electronic waste items. Contact your regional authorities for more details. If collection systems aren’t available, return unwanted mobile phones or electrical accessories to any Motorola Approved Service Centre in your region.Brit02_EN.book Page 16 Thursday, February 23, 2006 5:02 PM
17Using this guideUsing this guidePlease carefully read this user guide. It contains information about your phone and the way that it operates on the network. Some of the features described in this user guide are network dependent. Do not forget to check with your service provider which of these you can use. You may need to take out additional subscriptions to activate certain features.Key actionsTo help you become quickly familiar with your phone, here is how to use the keypad.OK key in the middle of the cursor key (to launch an OK action when (symbole carré) is displayed and access the animated Icons menu: see pictures below).Menu key (to reach the 9 icons menu from the idle screen or to reach options lists when indicated on the display).Left softkey (to validate the item above: usually an action).Right softkey (to validate the action above: usually Exit).Right arrow on cursor key.Left arrow on cursor key.Up arrow on cursor key.Down arrow on cursor key.Send and Call key.End, On and Off key.Brit02_EN.book Page 17 Thursday, February 23, 2006 5:02 PM
18Using this guide9 icons menuNote: The availability of the Calendar or Network services menu depends on your SIM card.User guide notationHere is how to follow the instructions contained in this user guide and use your phone. Press OKPress the key to select OK.Press the Menu key. Select Settings.From the standby display press the key to access the main menu, scroll up, down, left or right to the Settings menu item and press OK to access the sub-menu.Select Read (item above left softkey)Press the key underneath Read.Select ’Cancel’or ’Exit’ (item above right softkey)Press once to return to the previous screen. Press and hold to return to the standby screen (except whilst in the i-mode menu).Select MelodiesUse the cursor key to scroll up, down, left or right to the required menu item and validate by pressing OK.E.g. ’Select Melodies’: scroll to Melodies menu item and press the OK key to validate your selection.View...The ... indicate that more options or sub-menus are available when pressing OK.Brit02_EN.book Page 18 Thursday, February 23, 2006 5:02 PM
19Using this guideUsing the dynamic scroll panelsWhen scrolling the menu, the following scroll panel type al-lows you to have a clear view of the information to be entered.Note: The arrow keys displayed at the bottom of the screen show the scrolling possibilities.Understanding the graphic display indicators (icons)The icons indicate the phone state and operational conditions when in use.The following icons may be displayed:1The list of elements to be entered is displayed. Scroll down to the field(s) you want to fill in and press OK. 2Enter the requested information or select the requested item and select OK to validate. 3Fill in as many fields as necessary and select Save to store all the information entered.SIM memory in useGPRS service icon. This indicates that data packet services or connection to the i-mode are available.GPRS connection icon. This is displayed when a GPRS connection is in progress.Roaming. This is displayed when the phone is connected to a network other than its home network.Call diverting. This indicates that all incoming calls are being diverted. Call diverting is network dependent.Alarm clock.Vibrator alert.Brit02_EN.book Page 19 Thursday, February 23, 2006 5:02 PM
20Using this guideKeypad lock. Line 2. This indicates that the second line is in use (subscription dependent).Silent mode on.Mute.Auto-switch-off mode on.Short message service (SMS). This is displayed when one or more short messages have been received and not yet read. A red envelope icon is displayed when the SMS message box is full and no new message can be stored. SMS availability is network dependent.Voice Mail. This is displayed when a Voice Mail message has been received and stored by the networks Voice Mail centre. Voice Mail availability is network dependent.Outgoing Call.Incoming Call.Withheld number. This is displayed when the caller does not wish his identity to be shown.Unanswered call. This is displayed when an incoming has not been answered.Battery level indicator. This is permanently displayed to show the current battery charge level. Three levels are shown: from full (3 bars) to low (no bar). If the icon is empty, the phone needs recharging.Signal strength level. There are five strength levels. These show the strength of the received signal. The more bars, the stronger the signal. If the network cannot be found, no strength level is displayed.Tegic edition mode.Brit02_EN.book Page 20 Thursday, February 23, 2006 5:02 PM
21Using this guideMultitap edition mode.Arrow keys. These icons are displayed during menu operation to indicate that more items in the menu can be access by pressing or . Secured connection. This icon is displayed when a secured connection is in progress.Games & Applications software in use.Games & Applications icon. It is displayed when a game or an application is running.Problem with the Games & Applications auto-start.Mail or MMS on mobileMail or MMS box on mobile fullMail on serverMMS on serverMailbox on server fullMMS box on server fullBluetooth active. This icon is displayed when the Bluetooth service is activated on the mobile phone.Bluetooth connection with another device active. This icon is displayed when the phone is connected to another Bluetooth device, except when connected to ’My car kit’ and ’My headset’.Bluetooth connection with ’My car kit’ active. This icon is displayed when the phone is connected to ’My car kit’.Bluetooth connection with ’My headset’ active. This icon is displayed when the phone is connected to ’My headset’.Brit02_EN.book Page 21 Thursday, February 23, 2006 5:02 PM
22Using this guideFigures on Menu listWhen on a menu list, you can select the required item by scrolling up or down and pressing the OK key.Or you can dial the matching figure on the keypad.Brit02_EN.book Page 22 Thursday, February 23, 2006 5:02 PM
23Getting startedGetting startedPreparing the phone for operationPlease refer to your Quick Start Guide.Basic operationsTurning the phone onNote: Please refer to "Security features", page 163 for more details on your PIN and lock codes.If an image is set as a Welcome screen and/or a melody has been set as a Welcome melody, the phone first requests the PIN code then shows the selected image/animation and plays the selected melody before showing the idle screen (please see "Setting an image as an Idle screen, a Welcome screen or a Goodbye screen from the pictures folder", page 100 and "Melodies", page 101).1Press and hold the On/Off key. A beep sounds at phone activation. When switching the phone on for the first time or if the phone has been incorrectly switched off may be displayed.2If your SIM card is PIN protected, Enter PIN is displayed.Enter the PIN code and select OK.3If prompted, enter the date & time settings or select Exit if the settings are correct.Brit02_EN.book Page 23 Thursday, February 23, 2006 5:02 PM
24Getting startedMaking a callThe phone can make and receive calls only when it is switched on, when a valid SIM card is inserted and when it is connected to a GSM, DCS or PCS network service. If the keypad is locked you can receive calls but you cannot make any (see "Keypad lock", page 26).To make a call:Whilst in conversation an Options list (AutoDTMF, Hold or Retrieve, Speaker On or Speaker Off, Mute or Unmute, End call and Record) The Main menu is available by pressing the Menu key. Note: When using the hands free mode, do not put the phone to your ear.Note: The option Route to phone or Route to headset may appear if a bluetooth device is connected.Answering a callWhen receiving a phone call ( is displayed):1Dial the phone number or select one from your phonebook (press the down arrow key from the idle screen and select one of the available names).2Press the Call/Send key ( is displayed).In compliance with European regulations, you are obliged to inform your correspondent before recording a phone conversation.1Press the Call/Send key.Brit02_EN.book Page 24 Thursday, February 23, 2006 5:02 PM
25Getting startedNote: If a Bluetooth accessory (headset or car kit) isconnected to the phone and you wish to take the call on thehandset, press Options and select Route to phone or selectPhone (Left softkey).Rejecting a callWhen receiving a phone call:Ending a callThe Idle screenWhen switched on, the phone searches for connection with the network. Once the connection has been established, a beep sounds and the network and/or service provider name or logo are displayed together with the time and date, the signal strength and the battery charge level. If the phone cannot find a valid network, the signal strength and the operator name are not displayed.The four arrows indicate that features can be accessed via the four arrows on the cursor key.The symbol in the middle of the cursor key indicates that an action can be done by pressing the OK key.Mail and i-mode indicate that you can directly access the mailer and the i-mode service by pressing the softkeys. 1Press the On/Off key to reject the call (the call is then forwarded to your mailbox).1Press the On/Off key.Brit02_EN.book Page 25 Thursday, February 23, 2006 5:02 PM
26Getting started indicates that your phone is attached to a GPRS network.Keypad lockWhen activated, the keypad lock feature prevents accidental action occurrings (e.g. camera activation) whilst the phone is being carried in a pocket or a bag for instance. Incoming calls can however be received and answered. Once the call is over, the keypad lock is automatically reactivated.To activate the keypad lock from the idle screen:To activate the keypad lock from the main menu:To deactivate the keypad lock:Turning the phone offA tone sounds to confirm your action. A Goodbye screen is displayed whilst the phone switches off (you can set a Goodbye melody and/or picture to be played/displayed at phone switch off (please see "Setting an image as an Idle screen, a Welcome screen or a Goodbye screen from the pictures folder", page 100 and "Melodies", page 101). 1Press and hold . Keypad locked is displayed.1Press the Menu key. Select Settings.2Select Keypad, then select Keypad lock.1Select Unlock and press or press and hold . Keypad unlocked is displayed.1Press and hold the On/Off key.Brit02_EN.book Page 26 Thursday, February 23, 2006 5:02 PM
27Getting startedNote: Do not take the battery out of the phone without first turning the phone off. Data might be lost. Should this happen a cross symbol is displayed the next time the phone is activated.Power saverTo allow you to enjoy optimised use of your phone a power saver screen is automatically displayed when the phone has not been used for more than one minute. The screen becomes fully black.The power saver does not prevent operation. You can therefore receive a call, an SMS, etc. whilst the power saver is on. Pressing any key allows you to return to an active screen. Note: When a PC cable is connected to the phone, discharge of the battery may occur after a while, if the PC is in idle mode.Note: After having used your PC, and to enjoy optimised use of your phone standby and talk time, please do not forget to disconnect the PC cable after use.Brit02_EN.book Page 27 Thursday, February 23, 2006 5:02 PM
28ToolsToolsThe Tools menu allows access to a diary, a calculator, a cur-rency converter, an alarm clock and to Bluetooth.DiaryThe Diary is divided into three parts:•The Calendar (to manage events),•The Tasks list (to manage tasks),•The Storage used (to provide the diary memory information). An event is a diary entry that has a direct implication on your timetable (e.g. a meeting).A task is a diary entry that has no direct implication on your timetable (e.g. organising a journey).CalendarThe calendar allows you to store up to 100 events scheduled to occur either once, daily, weekly, monthly or yearly. Each entry can contain up to 50 characters plus a reminder alarm. Events may be viewed on a daily, a weekly or a monthly basis, and may be sent by SMS.Brit02_EN.book Page 28 Thursday, February 23, 2006 5:02 PM
29ToolsTo enter an event:An empty new event card is displayed with the following fields:•Title (up to 10 characters)•Description (up to 50 characters)•Starting date & time•Ending date & time•Alarm •Location•Repetition1Press the Menu key. Select Tools.2Select Diary.3Select Calendar. A Monthly or Daily view is displayed (the Daily view is displayed if an event is related to the current day).4Select Options.5Select New event. 6Enter or select the requested data. Confirm each entry by pressing OK. 7Select Save to confirm data storage.Brit02_EN.book Page 29 Thursday, February 23, 2006 5:02 PM
30ToolsTo view the current day’s entries:In the Today view each event is displayed on one line as follows :•A graphic representation ( ) if an alarm has been set,•The event starting time,•The first part of the event title,Red events indicated that two or more events clash.The following actions are available:An Options list is available. It allows you to change the current View..., Create a new event or Modify an event, Send it by SMS, Mail or Bluetooth, Export... it, Delete one event or Delete all events.1Press the Menu key. Select Tools.2Select Diary.3Select Calendar. 4Select Options.5Select View... and then Today to view the current day’s entries or select Day view to view the selected day’s entries.actions purposeTo move down to the next event or loop back to the first oneTo move up to the previous event or loop to the last oneTo move to the previous dayTo move to the next dayBrit02_EN.book Page 30 Thursday, February 23, 2006 5:02 PM
31ToolsTo view weekly entries:The week’s events are displayed in chronological order. Each event is represented as a bar (its length depends on its duration. Red indicates clashes. Purple indicates that the alarm has been activated). The following actions are available:An Options list is available. It allows you to change the current View..., Create an event, Export... the Events in a defined period/All events or Delete all events.1Press the Menu key. Select Tools. 2Select Diary.3Select Calendar. 4Select Options.5Select View... and then Week view. actions purposeTo move down to the next time intervalTo move up to the next time interval (short press) To move to the previous day (long press) To scroll to the previous week (short press) To move to the following day (long press) To scroll to the following weekBrit02_EN.book Page 31 Thursday, February 23, 2006 5:02 PM
32ToolsTo view monthly entries:The whole month is displayed. If the selected month is the current one, the date is ringed in a different colour. Colours are used to indicated the days (and alarm activation) of the stored events.The following actions are available:An Options list is available. It allows you to change the current View..., Create an event, Export... the Events in a defined period/All events or Delete all events.Tasks listThis feature allows you to store up to 100 tasks to be done (To do), scheduled with a start and a due date, with or without a reminder alarm.1Press the Menu key. Select Tools.2Select Diary.3Select Calendar. 4Select Options.5Select View... and Month view. actions purposeTo move down within the current displayTo move up within the current display (short press) To move to the previous day (long press) To scroll to the previous month (short press) To move to the following day (long press) To scroll to the following monthBrit02_EN.book Page 32 Thursday, February 23, 2006 5:02 PM
33ToolsTo enter a new task:An empty task card is displayed with the following fields:•A title•A description•A starting date•A due date•An audio alarm which can be activated at your specified timeTo display a tasks list:The tasks are displayed in a list, ordered by date. If an alarm is activated for a task is displayed.An Options list is available. It allows you to create a New task, Modify the current task, Send a task by SMS, Mail or Bluetooth, to Export... Tasks in period or All tasks, to Delete the current task or to Delete all tasks period. 1Press the Menu key. Select Tools.2Select Diary.3Select Tasks list. 4Select New task and enter the required information.5Enter or select the requested data. Confirm each entry by pressing OK.6Select Save to confirm data storage.1Press the Menu key. Select Tools.2Select Diary.3Select Tasks list. 4Select Current tasks or Elapsed tasks.Brit02_EN.book Page 33 Thursday, February 23, 2006 5:02 PM
34ToolsExporting an event/a taskThe Export... option allows you to create a file so as to exchange events or tasks with another device such as a PC or another phone. The created file can contain all the events or tasks stored in the calendar or in the tasks list (select All events/tasks) or in a time interval (Select Events/Tasks in period).Note: The exported calendar or tasks list item is stored as a .vcs file.Alarm notificationThe alarm notification screen is displayed at the specified time according to the event or task to which it relates.If it is not acknowledged, the alarm stops ringing after 60 seconds. It automatically restarts after a snooze time until it is stopped or up to the beginning/ending time and date of the event/task. If the phone is off at alarm time, it automatically switches on.1Press Options (from the Day, Week or Month view). Scroll down and select Export...2Select All events/tasks or select Events/Tasks in period then define the time period (Between / And) and select Export.3The exported file is stored in the Others folder of the Fun & Media box menu. You can then send it to another device (please see "Others", page 107).Brit02_EN.book Page 34 Thursday, February 23, 2006 5:02 PM
35ToolsIf the phone is locked or if the PIN setting is on, the phone returns to this locked state after the alarm has rung until you use it. Note: Snooze is only available on an event alarm.Storage usedThis feature displays the number of Diary registered events and tasks. The following actions are available in the Options menu:CalculatorThis feature allows you to make simple calculations using + (plus), - (minus), * (multiplication), / (division) and % (percentage) functions.If the currency converter is activated, numbers can be converted during calculations.1Press Valid to acknowledge the alarm or press Snooze to repeat the alarm after the snooze period.actions purposeDelete eventsTo delete the events of the defined time period.Delete tasksTo delete the tasks of the defined time period.Delete all eventsTo delete all the events stored in Calendar.Delete all tasksTo delete the tasks stored in the Diary.Brit02_EN.book Page 35 Thursday, February 23, 2006 5:02 PM
36ToolsTo use the calculator,Press keys to to enter numbers. Press the multitap (for further details on the multitap text entry method please see "Entering text", page 52) to get +, -, * and / symbols. Use the multitap to enter decimal points or %. Press Clear during a calculation to correct an entry. Press = to get the operation result. In the above example, pressing = again calculates 1728 x 12 = 20736Pressing Clear deletes the result.1Press the Menu key. Select Tools.2Select Calculator.The phone is ready to perform simple calculations.Example144 x 12 = 1728key sequence display 144Press 3x * 12= 1728Note: The % function can only be used (entered) as the last operation during a calculation. e.g.250 - 10% = 225Brit02_EN.book Page 36 Thursday, February 23, 2006 5:02 PM
37ToolsAn integrated currency converter facility is also available. See Currency converter below.Note: This example was made on the basis of the following exchange rate: 1 = £0.61871Note: The Currency converter feature can be accessed from the Calculator and from the Currency converter submenus.Currency converterThis feature allows currency converting. The currencies and exchange rates must be entered prior to use. The conversion is calculated on the per unit exchange rate of the second selected currency.Exampleusing the currency converter £ - : 154 + 3 = £ 97.1374key sequence displaySelect Curr. 95.2813 + 1.8561= 97.1374Brit02_EN.book Page 37 Thursday, February 23, 2006 5:02 PM
38ToolsTo select the currencies and the exchange rate:To calculate the conversion between the selectedcurrencies:Alarm clockThis feature allows you to set a daily Reminder Alarm.1Press the Menu key. Select Tools.2Select Currency converter.3Select Settings.4Enter the first currency name (e.g. Euro). Press the OK key.Enter the second currency name (e.g. Dollar). Press the OK key.Enter the exchange rate using to enter a decimal point.5Press the OK key to validate the entry. Press Save to confirm data storage.1Press the Menu key. Select Tools.2Select Currency converter.3Select one of the first two options.4Enter the amount to be converted. Press to insert a decimal point if needed.5Press the OK key. The converted amount and the exchange rate information are displayed.Brit02_EN.book Page 38 Thursday, February 23, 2006 5:02 PM
39ToolsTo set a time and turn the alarm on: Note: When 'on', the alarm operates at the same time every day until turned off.If the phone is off at alarm time, it automatically switches on.If the phone is locked or if the PIN setting is on, the phone returns to this locked state after the alarm has rung until you use it.If the alarm is acknowledged but not validated after the 3rd (and final) alarm, the alarm indicators remain on the display for up to 15 minutes (the phone then either goes back to its 'on' or 'off' previous state).Note: If a call is in progress at alarm time a 'Call in progress' alert beep sounds and a visual alert is displayed every 3 minutes. Validate or acknowledge the alarm in the usual way.1Press the Menu key. Select Tools.2Select Alarm clock.3Select On and enter the alarm time or press the OK key to validate the displayed time. is displayed when reverting to the idle screen. Brit02_EN.book Page 39 Thursday, February 23, 2006 5:02 PM
40ToolsTo use the alarm as a Reminder or a Snooze Alarm:To turn the alarm off:BluetoothBluetooth connections are radio connections. Bluetooth connections allow to exchange data and to launch wireless connections between the phone and another phone, a computer, a headset, a car kit or other devices (provided they are Bluetooth compatible). You can for instance receive or send files such as images for your idle screen (see "Pictures", page 97), send or receive name cards, melodies, use a Bluetooth headset...You can send files via Bluetooth from several menus or sub-menus (e.g. by pressing on the [Options] key after having captured a picture, then by selecting Send by... Bluetooth).To initiate a connection via Bluetooth, your phone must be close to another Bluetooth compatible device.1Press No ring, or any other key (except Valid. and OK) to snooze the alarm. The alarm icons remain on the display and the alarm starts ringing again 3 minutes later.Or press Valid or OK to acknowledge the alarm and stop the alarm clock process.1Press the Menu key. Select Tools.2Select Alarm clock.3Select Off. Brit02_EN.book Page 40 Thursday, February 23, 2006 5:02 PM
41ToolsBoth ports can be opened, the Bluetooth connection can then be activated. The requested connection can then be performed. Files (e.g name cards or pictures) are transferred one by one.Caution: If you activate the Camera or if you initiate a Speech notes recording while a Bluetooth connection is active, the connection is automatically closed.Opening a Bluetooth connectionTo launch a connection with another device, the Bluetooth connection must be open:Allowing handset detectionThis option allows to define whether the handset should be detected by any device or by paired devices only:1Press the Menu key. Select Tools.2Select Bluetooth then select Settings.3Select Bluetooth activation. Select On. The Bluetooth connection is launched and the phone automatically acknowledges the state of the other device.1Press the Menu key. Select Tools.2Select Bluetooth then select Settings.3Select Phone is detectable. Select By all devices or Only by paired devices. Brit02_EN.book Page 41 Thursday, February 23, 2006 5:02 PM
42ToolsNaming your handset for other devices detectionExporting a file to another deviceWhen on one or several files you wish to export: Searching Bluetooth connectionsYou may wish to search connections with surrounding Bluetooth devices (provided their Bluetooth connection is open and the connection is allowed):1Press the Menu key. Select Tools.2Select Bluetooth then select Settings.3Select Phone name then type the required name into the edition screen. 1Press Options. Select Send by.... Bluetooth.2If the ’Send to’ list is empty, select the type of device to send the file to (A phone, A computer, Other device).2’If the ’Send to’ list bears items, select the required one or select Search to find the Bluetooth connection with the other device.3The Bluetooth connection is automatically launched, and the file is transferred.1Press the [Menu] key. Select Tools.Brit02_EN.book Page 42 Thursday, February 23, 2006 5:02 PM
43ToolsNote: A ’Bluetooth passkey’ may be required by one or the other devices. The connection cannot be established if the typed code is wrong.Accessing the list of paired device(s)The paired devices are other Bluetooth compatible devices already registered in the phone:2Select Bluetooth.2’Press Paired devices and select Search.Select My headset, My car kit, A phone, A computer or Other device.3The list of the found devices is displayed or the ’No peer found’ message is displayed if no Bluetooth device was found.1Press the [Menu] key. Select Tools.2Select Bluetooth.3Select Paired devices. The list of registered paired devices is displayed. The following option menu is available if devices names are registered into the list:option descriptionEditTo view/modify informations on the selected device.ConnectTo connect the phone to the selected device.DisconnectTo disconnect the phone from the selected device.Brit02_EN.book Page 43 Thursday, February 23, 2006 5:02 PM
44ToolsWhen on a paired device name, pressing OK allows you to change the device name but also to define a security level:Connection with audio accessoriesYou can establish a wireless connection between your mobile phone and a Bluetooth headset or car kit. You can then make or receive calls from the connected accessory, without handling your phone.To establish a wireless connection with an audio accessory, please proceed as described above ("Opening a Bluetooth connection", page 41).When the Bluetooth bearer is activated, Press Paired devices and select Connect from the Options menu.Search newTo search a new Bluetooth compatible device.DeleteTo delete the selected device from the list.Delete allTo delete all the device(s) from the list.option descriptionAccept themTo accept connection requests from selected device.Always ask meA message is displayed on each connection request from selected device so that you can accept or reject the connection.option descriptionBrit02_EN.book Page 44 Thursday, February 23, 2006 5:02 PM
45ToolsUsing your phone as a modemYou can use your phone as a modem for other devices (PC, PDA,...) via a PC cable or Bluetooth. In order to activate a connection, a standard modem driver must already be installed in the other appliance: Note: The PC cable may not be supplied with your phone. Please ask your retailer for an XXXXX compatible PC cable.Note: The compatibility between GPRS and i-mode features is operator dependent.Your phone:1Install the PC cable on your PC or PDA or open a Bluetooth connection.2Install the modem driver.3Configure the PC according to the instructions given with the modem driver.Please enter the following parameters:•Flow control: Hardware•Data Bits: 8•Parity: No parity•Stop Bit: 1 stop Bit•Speed: 115200b/s.1Plug in the PC cable or open a Bluetooth connection (please refer to your Quick Start Guide).Brit02_EN.book Page 45 Thursday, February 23, 2006 5:02 PM
46ToolsOnce both devices are ready, the Internet connection can be activated (without any action being performed on your phone).Brit02_EN.book Page 46 Thursday, February 23, 2006 5:02 PM
47MessagesMessagesThis section describes the contents of the Messages menu and contains full information on the Short Message Service. Other types of messages can be sent and received via your phone. Please refer to the i-mode section (page 113) for full in-formation on E-mail and MMS.The Short Message Service (SMS) allows to send or receive text messages to or from other mobile phones. You can store, edit and forward messages as well as save any of the num-bers they may contain.These SMS are stored on the phone memory; they may also be stored in the SIM card if they are sent by a service provider. You can access the Messages menu via the 9 icons menu or by pressing and holding the Mail softkey from the standby display.Reading a received SMS messageWhen the phone receives an SMS message, an information about the message sender is displayed on the idle screen. The message is automatically stored in the phone or in the Brit02_EN.book Page 47 Thursday, February 23, 2006 5:02 PM
48MessagesSIM card. A flashing indicates that the SIM or the phone memory are full and cannot store any further messages. Delete messages to allow new messages to be delivered.Reading stored SMS messagesUnread messages are indicated by the icon. Messages that have already been read are indicated by .Moving messages to SIMIt is possible to move a message from the Inbox or the Outbox to the SIM memory. However, according to the message size, the message may be truncated (the 160 first characters only are moved to the SIM memory). The sending date (for sent messages) and the 'Copy to' addressees are lost when moving the message to the SIM memory.1Press Read to read new messages (from the standby display only).2Press Options to View, Reply, Reply (+text), Delete, Delete all, Forward, Send as mail, Move to SIM or Numbers (to store or call the number(s) contained in the SMS header or text).1Press the Menu key. Select Messages.Or press and hold the Mail softkey.2Select Inbox or SIM archive then select Received messages to display the message list. Use the arrow key to scroll up and down and access the message you want to read. 3Select OK or Options/View to read the message text.Brit02_EN.book Page 48 Thursday, February 23, 2006 5:02 PM
49MessagesTo move a message to the SIM memory:Forwarding messagesYou can forward a received message to other people/number(s):1Press the Menu key. Select Messages.2Select Inbox or Outbox.3Choose the message to be moved and select Options.4Select Move to SIM.1Press the Menu key. Select Messages.2Select Inbox or SIM archive/Received messages.3Select the message to be forwarded and select Options.4Select Forward.5Press OK. Select the To field and select one of the displayed names or select More... if you want to send your message to another mobile number (directly enter the number). Press OK to validate.6In the Text field enter the message text (see "Entering text", page 52) or select one of the models (Models) and press OK. 7If you want to send the message to several addressees, enter one or several phone numbers/names in the Copy to list (up to 4 more addressees) and press OK then Valid to return to the previous screen. Brit02_EN.book Page 49 Thursday, February 23, 2006 5:02 PM
50MessagesActivating or deactivating the message alert toneEach time a message is received, a new SMS alert tone sounds. To activate or deactivate this tone:You can choose an alert melody for your SMS:8Select Options.9Select Send, Send without storing or Store. 10A warning information displays the number of SMS needed to send the message if it is more than one. Select Go on if you want to send the message or select Cancel if you do not want to send it or if you want to amend your message.1Press the Menu key. Select Messages.2Select Settings.3Select Reception Alert. Select On or Off.1Press the Menu key. Select Messages.2Select Settings.3Select Reception alert. 4Select Alert and select On.5Select Melody and select one of the available ringtones.Brit02_EN.book Page 50 Thursday, February 23, 2006 5:02 PM
51MessagesPreparing the phone to send SMS messagesBefore sending your first SMS or if you want to register a new profile, the network SMS centre number (obtainable from your service provider) must be stored:Note: You may not be allowed to change your sending profile (format and validity period). Please contact your service provider for further details.fields description defaultNameTo enter the profile name. Profile1Message centreTo enter the centre number. EmptyFormatTo set the message format: text, voice, fax or paging.TextValidity periodTime the message remains at the message centre until delivered.Maximum1Press the Menu key. Select Messages.2Select Settings.3Select Sending profile.4Enter the message centre number or select a template (if several available) then enter the following fields (operator dependent).5Select Save to validate.Brit02_EN.book Page 51 Thursday, February 23, 2006 5:02 PM
52MessagesThe SMS centre number may already be available in your SIM card and may be automatically displayed. If you want to select a Sending profile for your message:Entering textSome features and functions (storing names in the phonebook or typing SMS text messages, Tools, Settings,...) require you to know how to enter and edit text in the display.Three modes are available. They are indicated by in lower case mode, by in upper case mode and by in numeric mode. Text, figures and alphabet characters can then be entered or edited directly from the keypad. Press to switch from one mode to another.There are two methods of entering text characters: the Multitap or Multipress key method, and the quicker intuitive method, called T9 text input.Press the down arrow key to swap between the T9 and the Multitap methods. When on T9 mode, is displayed on the upper part of the display to indicate that T9 is the current mode. is displayed on the lower part of the screen to indicate that the Multitap text method can be accessed by pressing the down arrow key. When on Multitap mode, is displayed on the upper part of the display to indicate that 1Press the Menu key. Select Messages.2Select Settings. 3Select Sending profile and select the profile you want to use. Select Options.4Select Select.Brit02_EN.book Page 52 Thursday, February 23, 2006 5:02 PM
53MessagesMultitap is the current mode. is displayed on the lower part of the screen to indicate that the T9 method can be accessed by pressing the down arrow key. The multitap/multipress methodA brief press on a key displays the first character associated with the key and shows the other available characters at the top of the display. Here is the list of the available characters (the available characters list is language dependent):key characterLower case Upper case. , - ' @ : ?/_1a b c 2 A B C 2d e f 3 D E F 3g h i 4 G H I 4j k l 5 JK L 5m n o 6 M N O 6p q r s 7 P Q R S 7t u v 8 T U V 8w x y z 9 W X Y Z 90 0Short press : to switch mode (T9 or multitap) to lower case, upper case or numeric mode.Long press : to switch from lower case to upper case. Only the first letter entered is upper case, the following ones are lower case (e.g.: to write a surname).Brit02_EN.book Page 53 Thursday, February 23, 2006 5:02 PM
54MessagesTo enter text, press the key bearing the required character until it appears in the display. Holding the key displays the number corresponding to the key. If you need to use two characters from the same key, wait for a few seconds after entering the first character (until the key characters on the upper part of the screen are cleared) or press the right arrow key before pressing the key again.Correct mistakes by a short press on Clear. Holding the Clear key deletes all the text. Use the left or right arrow keys to move the cursor in the text. Holding allows you access to 25 special characters:To select and insert a character into the text:Note: The ↵ symbol is only displayed when on SMS and i mode. It allows you to go to the following line.Short press: to enter a space. Long press: to access special characters. Short press: moves the cursor through the text one place to the left or to the right. Long press: moves the cursor to the text beginning or end.Swap between the Multitap/Multipress method and the T9 text input1Move the cursor to the required character.2Select OK.key characterBrit02_EN.book Page 54 Thursday, February 23, 2006 5:02 PM
55MessagesMultitap method:The T9 methodA press on the down arrow key allows you to swap between T9 text entry and the Multitap method.ExampleTo type Card:Press the Menu key and select Messages.Select Write new.Fill in the To field (see "Sending a new SMS message", page 58).In the Te x t field, press the key until is displayed. Press briefly three times, C is displayed.Press until is displayed. Press once, a is displayedPress three times, r is displayedPress once, d is displayed. The word Card is now displayed.1Press the key bearing the required letter once only (the requested character may not be displayed first).2The active word changes as you enter text. Enter all the word characters up to the end of the word.3If the right word is not displayed when all the characters have been entered, press until you get the required word.4If the requested word does not correspond to the one displayed, press the down arrow key to swap to the multitap method and enter the correct letters.5Use the left or right arrow keys to move the cursor around the text to insert or delete characters.Brit02_EN.book Page 55 Thursday, February 23, 2006 5:02 PM
56MessagesNote: To insert a text symbol such as :) or :-) or press two or three times. Press as many times as necessary to change the symbol to :( or :-( etc.Tips and Operationkey actionShort press : to switch mode (T9 or multitap) to lower case, upper case or numeric mode.Long press : to switch from lower case to upper case. Only the first letter entered is upper case, the following ones are lower case (e.g.: to write a surname).Clear Clear or backspaceShort press: to enter a space. Long press: to access special characters.Another matching wordSmart punctuation Short press: moves the cursor to each word beginning or end .Long press: moves the cursor to the text beginning or end .Swap between the T9 and the Multitap methodBrit02_EN.book Page 56 Thursday, February 23, 2006 5:02 PM
57MessagesCreating text modelsYou can create a set of messages to be used as models. These texts can contain up to 50 characters and allows you to add text when you want to use them. These templates are stored in the phone memory.To create text models:Exampleto write card:Press the Menu key and select Messages.Select Write new.Fill in the To field (see "Sending a new SMS message", page 58).In the Te x t field, press the down arrow key until is displayed. Press , a appears.Press , cc appears.Press , car appears.Press , case appears.If the displayed word is not the one you want, press as many times as necessary to view card.1Press the Menu key. Select Messages.2Select Text models.3Choose any blank template ([...]) and press OK.4Enter the template text and press OK.Brit02_EN.book Page 57 Thursday, February 23, 2006 5:02 PM
58MessagesEditing a text modelSending a new SMS messageYou can send message texts (up to 918 characters). The standard size for an SMS is 160 characters (your service provider charges you according to the number of SMS used to send your message). The icon (1 = number of SMS used - it is updated while writing your message and shows the number of SMS needed to send your message) is displayed on the left corner of the screen. To send SMS from the Menu: 1Press the Menu key. Select Messages.2Select Text models.3Select the text model to be modified and press OK.4Edit the text and press OK.1Press the Menu key. Select Messages.2Select Write new.3Press OK. Select the To field and choose one of the displayed names or select More... if you want to send your message to another mobile number (directly enter the number). Press OK to validate.4In the Text field, enter the message text (see "Entering text", page 52) or select one of the models (Models) and press OK. 5If you want to send the message to several addressees, enter one or several phone numbers/names in the Copy to list (up to 4 more addressees) and press OK then Valid to return to the previous screen. Brit02_EN.book Page 58 Thursday, February 23, 2006 5:02 PM
59MessagesNote: The message is automatically stored in the Outbox, except if you have selected Send without storing.Note: If you have registered an automatic signature, the number of characters used is automatically added to the message length.To send SMS from the standby display:or:or:6Select Options.7Select Send, Send without storing or Store. 8A warning information displays the number of SMS needed to send the message if it is more than one. Select Go on if you want to send the message or select Cancel if you do not want to send it or if you want to amend your message.1Press the up arrow key, then proceed as described above.1Press the down arrow key to access the phonebook. Select one of the available names or numbers.2Select Options.3Scroll down and select Send SMS to, then proceed as described above.1Press and hold the softkey underneath Mail.2Select Write new, then proceed as described above.Brit02_EN.book Page 59 Thursday, February 23, 2006 5:02 PM
60MessagesSignatureYou can register a signature to be automatically added to your text messages. The signature is not displayed when typing the message text but it is displayed on message reception by the addressee. The maximum size for the signature is 30 characters. If the message text to be sent already 918 characters, the signature cannot be added. To register a signature:Outbox and SIM archive emitted messagesThe Outbox and SIM archive emitted messages contain unsent draft messages and stored sent messages (delivered or undelivered). These messages can be selected from the outbox or SIM archive menu and can be modified and resent as new SMS messages.1Press the Menu key. Select Messages.2Select Settings.3Select Signature. 4Select Insert in message. Select Yes.5Select Text and enter your signature text.6Select Save to store your signature.Brit02_EN.book Page 60 Thursday, February 23, 2006 5:02 PM
61MessagesTo select one of these messages:Status requestIf a status is requested on a sent message, a status request is sent to the network (must be network supported). If the status is requested on a delivered message the date and time of delivery may be shown.The network then answers by sending a status report (SR) back to the phone. Press OK to acknowledge it.To activate the status request:1Press the Menu key. Select Messages.2Select Outbox or select SIM archive then Emitted messages and use the up or down arrow keys to scroll to the required message. Messages are either 'transmitted' or 'to be sent'.3Press Options to View, Delete, Delete all, Status (for sent messages only) Send, Send as mail, Modify, Move to SIM (for outbox messages only), Numbers (to store or call the number(s) contained in the SMS header or text) or Details.1Press the Menu key. Select Messages.2Select Settings. 3Select Message config. 4Select Delivery report and select On.5Select Save. Brit02_EN.book Page 61 Thursday, February 23, 2006 5:02 PM
62MessagesTo request a reply:A reply to your message can be requested from your correspondent. If you activate this feature, you will be charged for the cost of the reply message.The availability of this feature is operator dependent.To read the sent message, delete or re-send it when receiving the status: Storage consumptionThe storage status for SMS messages can be consulted. To view the number of messages stored, the total available space on the Phone memory and on the SIM card:1Press the Menu key. Select Messages.2Select Settings. 3Select Message config. 4Select Reply requested and select On.5Select Save. 1Press Options. Send again, Clear, Associated message or Delete message is displayed.2Select the required action.1Press the Menu key. Select Messages.2Select Storage used. The SMS memory used is displayed. Scroll down to access the SIM archive.3Select Details for more information on the Phone and SIM stored messages (use up and down arrow keys to scroll to the required information).Brit02_EN.book Page 62 Thursday, February 23, 2006 5:02 PM
63MessagesBroadcast - cell broadcast (CB) messagesThese messages are broadcast by the networks to GSM users and may provide general information about local area dialling codes, weather reports, traffic, news, etc. Each type of message is numbered, allowing you to select the type of information you wish to receive.Up to 5 types of messages can be programmed into the selection list. 16 standard message types are pre-programmed into the phone for your selection. New message types can be programmed into the selection list using the 3 digit cell broadcast type number. Contact your service provider for details about the type of messages they broadcast.Before you activate the broadcast message service, you must enter at least one message type in the selection list.Brit02_EN.book Page 63 Thursday, February 23, 2006 5:02 PM
64MessagesEntering a message type in the selection listActivating / deactivating the broadcast serviceReading broadcast messagesBroadcast messages are displayed whilst the phone is on standby. If a broadcast message is received whilst in conversation or operating the menu, it only become visible once the phone revert to the standby display. A message can contain up to 93 characters and may be displayed on several pages.1Press the Menu key. Select Messages.2Select Settings.3Select Broadcast.4Select Message types and select one of the empty types ([...]). Select OK.5Select Modify by list (or Modify by code if the type number is known).6Select the message type(s) you wish to receive and select Valid.7Select Save to store your setting.1Press the Menu key. Select Messages.2Select Settings.3Select Broadcast.4Select Reception and select On or Off.5Select Save to store your setting.Brit02_EN.book Page 64 Thursday, February 23, 2006 5:02 PM
65MessagesOptions on message displayPress Exit to clear the CB message displayed. Press the call key to dial the number contained in the message. Press Options to display the following menu:Activating/deactivating the alert toneAn alert tone can be set to beep every time a new or updated broadcast message is received.Broadcast languageAll the broadcast messages can be displayed in several languages.option actionDeleteTo delete the current messageDelete AllTo delete all the received CB messagesNumbersTo display all phone numbers contained in the message text and dial or store them in the phonebook if required.Broadcast OffTo deactivate cell broadcast.1Press the Menu key. Select Messages.2Select Settings.3Select Broadcast.4Select Reception alert and select On or Off.5Select Save to store your setting.Brit02_EN.book Page 65 Thursday, February 23, 2006 5:02 PM
66MessagesTo select a language:Note: The availability of this feature is network dependent.1Press the Menu key. Select Messages.2Select Settings.3Select Broadcast.4Select Language and select one of the available languages.5Select Save to store your setting.Brit02_EN.book Page 66 Thursday, February 23, 2006 5:02 PM
67Calls & timesCalls & timesAccess the Calls & Times menu to check the details of individ-ual incoming and outgoing calls, the duration of the last call, the total call time for all sent and received calls or to play the recorded calls.Calls logThis feature stores details (identity, time and date and call duration) about the last 10 numbers dialled, the last 10 unanswered calls and the last 10 received calls. The calls log can be activated for Line 1 and Line 2 (Line 1 is your main line. Line 2 availability is subscription dependent).The last number dialled or received is displayed first. The caller’s name is displayed if it is registered in one of the phonebooks (if not the phone number is displayed). If your subscription does not have Caller Line Identification (CLI) ’Unknown number’ is displayed. If the caller has withheld his number, ’Withheld number’ is displayed.Press the call key to call the selected number. 1Press the Menu key. Select Calls & Times.2Select Calls log.3Select Last dial, Unanswered calls or Received calls.4Use the up or down arrow keys to scroll through the calls list.Brit02_EN.book Page 67 Thursday, February 23, 2006 5:02 PM
68Calls & timesPress Options to access the following menu:Use the up or down arrow keys to select the required option and follow the instructions displayed.Note: Press the call key from the standby display to access the last dialled numbers. Call timersThe voice, Modem and GPRS call information for Line 1 and Line 2 is stored in the Call timers menu.The Details sub-menu stores time information on calls made and received via the home network and whilst roaming (national and international networks).item actionStoreTo store the number in the phonebook.DeleteTo delete the entry.Delete allTo delete all entries.EditTo edit the displayed number.DetailsTo view the name, number, time and date and call duration (for answered calls only) of the selected number.CallTo call the selected number.Send SMSTo send an SMS message to the selected phone number.Brit02_EN.book Page 68 Thursday, February 23, 2006 5:02 PM
69Calls & timesNote: If the call timers have been reset (see "Call timer - reset", page 70) the date of the latest counter reset is displayedThe call type and the accumulated times of outgoing and in-coming calls are displayed.Selecting Details displays information on calls made on your home network, on National roaming and on International roaming.Note: If Line 2 is active too, 'All Calls' for Line 1 and Line 2 are displayed separately.Balance information (subscription dependent)This service may be supplied by your service provider. It allows you to view the remaining airtime balance on your phone line. Please contact your service provider for more information. If your subscription allows access to this information:1Press the Menu key. Select Calls & Times.2Select Call timers.3Select Show.4Use the up or down arrow keys to view all the timer information.1Press the Menu key. Select Calls & Times.Brit02_EN.book Page 69 Thursday, February 23, 2006 5:02 PM
70Calls & timesWhen selecting Call, if the balance information number is already stored, a call is sent to the balance information centre. If no number is stored, select Set number and enter it. Press OK to store the number, then select Call to call the information centre number.Reminder - call durationYou can set a duration reminder to beep regularly to remind you of the time spent on your call. The frequency can be any multiple of 1 minute (up to 59 minutes). Call timer - resetThis feature allows you to reset the call timers. The 4 digit lock code is required to reset the call timers (default lock code: '0000').2Select Call timers.3Select Balance information.4Select Call or Set number.1Press the Menu key. Select Calls & Times.2Select Call timers.3Select Reminder.4Select On to activate the Call timer.5Enter the call timer interval (e.g.: 2 = a beep sounds every 2 minutes whilst in conversation).6Press OK to validate the entry. 1Press the Menu key. Select Calls & Times.2Select Call timers.Brit02_EN.book Page 70 Thursday, February 23, 2006 5:02 PM
71Calls & timesCall costs - managementSome service providers offer an Advice of Charge (AoC) subscription service allowing you to view the cost of the last call cost, the total calls cost and the remaining balance on your account (once a 'credit limit' has been set ).To display these, you must first set a currency value and enter an average cost per unit (only calls units are displayed if the cost information is not stored).To set a currency value per unit:To set call cost type to units:3Select Reset.4Select Yes.5Enter the phone lock code and press OK. 1Press the Menu key. Select Calls & Times.2Select Call costs.3Select Display cost type.4Select Currency. The current currency unit value is displayed.5Select Modify. Enter your PIN 2 code and press OK.6Enter the currency name (up to 3 letters). Press OK to validate. 7Enter the unit cost (e.g.: 0.15 Euro per minute). And press OK to validate. 1Press the Menu key. Select Calls & Times.Brit02_EN.book Page 71 Thursday, February 23, 2006 5:02 PM
72Calls & timesNote: When the cost type is set to units, the credit limit and the remaining credit are shown in units.Setting the credit limit (subscription dependent)You may also be able to set a credit limit to your calls. Once the credit limit has been reached, no more chargeable outgoing or incoming calls are allowed. You can however still make emergency calls.The PIN2 code is required to set the credit limit.Note: When a credit limit has been set, the selection from the 'Credit limit' display is Edit or Set no limit.Show costs2Select Call costs.3Select Display cost type.4Select Units.1Press the Menu key. Select Calls & Times.2Select Call costs.3Select Credit limit. The display indicates the current credit limit set.4Select Edit. Enter your PIN 2 code and press OK.5Enter the credit limit (use to enter a decimal point for currencies). Press OK to validate.1Press the Menu key. Select Calls & Times.Brit02_EN.book Page 72 Thursday, February 23, 2006 5:02 PM
73Calls & timesNote: The remaining credit is shown in either units or currency, as set by Cost Type menu above.Call costs - resetting all costs to zeroTo reset all call costs to zero:Alternate line service - selecting line 2 (subscription dependent)Some operators support the use of a second line. You may then have two mobile phone numbers (e.g. a business line plus a personal line). To use them you need to select the line to be used. 2Select Call costs.3Select Show.4Use up and down arrow keys to display the Last Call and All Calls or show the Remaining credits.1Press the Menu key. Select Calls & Times.2Select Call costs.3Select Reset.4Select Yes. 5Enter the PIN 2 number and press OK.1Press the Menu key. Select Calls & Times.2Select Line selection.The current line selection is displayed. 3Use up and down arrow keys to scroll to the required line. Press OK to validate.Brit02_EN.book Page 73 Thursday, February 23, 2006 5:02 PM
74Calls & timesNote: The Line selection sub-menu may not be available on your phone. Please contact your service provider for further details about this service.Note: Line 1 and Line 2 can be named (Office and Home for instance). Refer to My number menu (see "My number(s) display", page 88). Whichever line is selected to send calls, incoming calls can still be received on either line.Recorded callThis submenu allows you to play the recorded phone calls. If several phone conversations have been recorded, they are played one after another. In compliance with European regulations, you are obliged to inform your correspondent before recording a phone conversation.1Select Calls & Times, select Recorded call.Brit02_EN.book Page 74 Thursday, February 23, 2006 5:02 PM
75PhonebookPhonebookPhone numbers can be stored in the phone and in the SIM card memories (= phonebook). The phone memory can store up to 255 'extended' cards (called 'phonebook cards'). These cards allow you to store different types of information: family name, first name, home number, mobile number, two E-mail addresses, postal address, business information, voice tag, category and a related icon or picture. The SIM card memory capacity may vary according to your operator or service provid-er. The SIM memory allows you to store one name, one phone number and one voice tag per card.Both the SIM and the phone memories are searched when reading the Phonebook contents.Note: Press the down arrow to access the phonebook from the idle screen.Storing names and telephone numbersNames and numbers can be stored directly in the phonebook or copied from different sources such as SMS messages, last dialled number list, etc.There are several ways to store numbers in the phonebooks:Brit02_EN.book Page 75 Thursday, February 23, 2006 5:02 PM
76PhonebookPhone names cardFrom the idle screen:Via the menu: Note: The categories field allows you to identify the caller’s type according to entries you have previously set (see "Creating a Category of cards", page 85).Note: If you do not set pictures for your phonebook cards, a default icon is displayed on incoming call.1Enter the number. Select Store. 2Select Phone names.3The Home number, Work number, Mobile number or FAX number list is displayed, thereby allowing you to select a number type.4Enter the card requested data and select Save to store the information. 1Press the Menu key. Select Phonebook.2Select Add name. 3Select Phone names.4Enter the card requested data and select Save to store the information. Brit02_EN.book Page 76 Thursday, February 23, 2006 5:02 PM
77PhonebookYou can also link melodies to your phonebook cards. The melody is then played when a call is received from one of the card numbers.SIM names cardFrom the idle screen:Via the menu:1Press the down arrow key (from the idle screen) to access the phonebook.2Scroll down to the card you want to access and select OK or select Options then select View.3Scroll down to the Ringtones field and select OK. No sound is the default selection. Scroll down the list of available melodies and select one. Press OK to confirm your selection. 1Enter the number. Select Store. 2Select SIM names.3Fill in the available fields and select OK to validate your entries.4Select Save to store the card.1Press the Menu key. Select Phonebook.2Select Add name. 3Select SIM names.4Enter the name and select OK.5Enter the number and select OK.6Select Save to store the card.Brit02_EN.book Page 77 Thursday, February 23, 2006 5:02 PM
78PhonebookStoring a received numberNumbers stored in the last dialled, received, unanswered call information and SMS message locations can also be stored in the phonebook:Note: While entering a number, selecting Clear once deletes the last character. Holding the Clear key deletes the whole number.Note: The *, +, p (pause) and _ characters- which are accessible by pressing and holding the key when registering a number - can be stored as part of numbers.Note: You can use _ (wild card spaces) to store numbers (wild card spaces cannot be obtained when registering a number from the idle screen).Note: When calling a number containing wild card spaces, select the number from the phonebook, select Options or press on the Call/Send key and enter the number corresponding to the wild card spaces (=missing figures).1With a received call, unanswered call or SMS message select Options.2For an SMS message, select Numbers if the number is contained in an SMS. The message number(s) is/are displayed. Select one if several numbers are available.2’For received and unanswered calls, select Store.3Follow the above mentioned procedure to create a phone name or a SIM name card then select Save to store the card.Brit02_EN.book Page 78 Thursday, February 23, 2006 5:02 PM
79PhonebookNote: If the SIM card or phone memory are full, a warning message is displayed on the phonebook selection.Copying all names and numbersWhen consulting your phonebook for the first time the ’Copy all SIM names to phone?’ message is displayed. Select Yes.You can copy all the names cards: from the Phone to the SIM card and from the SIM card to the Phone.Note: If your Phonebook cards bear more than one number (home, mobile, work, fax numbers), the first available number from the list is copied to the corresponding SIM card entry. 1Press the Menu key. Select Phonebook.2Select Read.3Select Options.4Select Copy all names.5Select Phone to SIM or SIM to phone.All the names are copied unless the SIM card memory does not bear enough free space when copying the Phone entries to the SIM card. A warning message is then displayed.Brit02_EN.book Page 79 Thursday, February 23, 2006 5:02 PM
80PhonebookEditing a phonebook or a SIM name cardFrom the idle screen:Via the menu: Note: You can choose one melody per Phonebook card. You can create a voice dialling pattern on phonebook cards. This voice dialling pattern can only be recorded in edition mode.1Press the down arrow to access the phonebook.2Scroll down to the card you want to access and select OK. 3Scroll down to the field(s) you want to modify and amend it/them. Select Save to store the changes.1Press the Menu key. Select Phonebook.2Select Read. 3Select one of the stored cards.4Select Options.5Select View.6Scroll down to the field(s) you want to modify and amend it/them. Select Save to store the changes.Brit02_EN.book Page 80 Thursday, February 23, 2006 5:02 PM
81PhonebookRecording a Voice dialling pattern:Note: You may have to select the number, the voice dialling pattern has to be attached if several numbers are stored on the card. Select Home number, Mobile number or Work number if you have registered several numbers on a phonebook card.Viewing and calling phonebook numbersThere are two ways of viewing and calling entries stored in the phonebook:1Press the down arrow key (from the idle screen) to access the phonebook.2Scroll down to the card you want to access and select OK or select Options then select View.3Scroll down to the Voice dialling field and select OK. Select New to record the voice pattern or select Options then Record if a voice pattern is already recorded and you want to change it.Repeat the name until it is stored (minimum = twice). Pronounce it as clearly as possible and in a quiet environment. When the voice patterns match, Stored is displayed.Brit02_EN.book Page 81 Thursday, February 23, 2006 5:02 PM
82PhonebookDirectly from the idle screen:Via the menu:The list of phonebook entries is displayed in alphabetical order.Note: Selecting a category from the Category selection displays the names/phone numbers of the corresponding category. This category is then displayed when next reading the Phonebook contents. Note: Selecting Options displays the following menu choice: View, Call, Add name, Delete, Delete all (Phone names or SIM names), Copy, Copy all names, Move, Category selection (to select All names, the Phone names only, the SIM names only or the categories members), Send by... SMS or Bluetooth, Send SMS to.1Press the down arrow key to display the phonebook list.2To access the required name, either scroll up or down using the up and down arrows or press a numeric key to access the different letters associated with the key. E.g: press twice to reach the names starting with letter ’B’.3Press the call key or select Options then select Call.1Press the Menu key. Select Phonebook.2Select Read to display the phonebook list, then scroll up and down to the required name or press a numeric key to access the different letters associated with the key. E.g: press twice to access the names starting with letter 'B'.3Press the call key or select Options then select Call.Brit02_EN.book Page 82 Thursday, February 23, 2006 5:02 PM
83PhonebookNote: If several phone numbers are stored on a Phone name card, scroll down to the required number and select it before activating the call.Voice diallingYou can make a call by using your voice.To create a voice pattern:Note: If the voice patterns do not match, Failed is displayed.Note: Repeat the whole voice registration procedure again.To view the voice dialling numbers list:1Press the Menu key. Select Phonebook.2Select Voice dialling.3Select New entry. All name entries are displayed.4Use the up and down arrow keys to select the card you want to use and press OK.If several phone numbers are registered on a card (e.g. Home number, Mobile number or Work number) select one by pressing OK.5You are then prompted to pronounce the name at least twice (pronounce it as clearly as possible). Stored is displayed when both voice patterns match.1Press the Menu key. Select Phonebook.2Select Voice dialling.Brit02_EN.book Page 83 Thursday, February 23, 2006 5:02 PM
84PhonebookTo remove all phone numbers from the voice dialling list:To call a phone number using the voice recognition: Free space in the phonebookTo view the remaining capacity in the phonebook:Note: If available, the free memories in the FDN list are also displayed. Please see "Fixed dialling numbers", page 88 for more information on FDN numbers.3Select List.4Use the up and down arrow keys to view the requested entry. 5Press Options to play the voice pattern, select Play Back, select Erase to remove a voice tag from the voice dialling list, or select Record to create a new voice pattern.1Press the Menu key. Select Phonebook.2Select Voice dialling.3Select Delete all.1From the idle screen, press and hold the call key.2Pronounce the name as clearly as possible.3The name called as well as an animated icon are then displayed and the call proceeds as normal.1Press the Menu key. Select Phonebook.2Select Storage used to get to the Phone names Storage used; press the down arrow key to get to the SIM card Storage used. Brit02_EN.book Page 84 Thursday, February 23, 2006 5:02 PM
85PhonebookCreating a Category of cardsCategories of cards can be defined for the phonebook. This feature allows you to group certain cards and to play a specific melody on receiving an incoming call from one of the category members.To create a Category: Categories characteristics can be modified or deleted (when in the Categories menu, select OK to amend the settings or select Delete to erase the category).To modify a category:1Press the Menu key. Select Phonebook.2Select Categories.3Select any blank template [...] and select OK. The following items are displayed:item functionCategory nameTo enter and store a category name.MelodyTo select a melody to be used as a ringtone on Category member calls.4Enter or select the requested data. Press OK to validate.5Press Save to store the defined category.1Press the Menu key. Select Phonebook.2Select Categories.3Select the category to be modified and select OK then select the category name and/or the melody. Select the new parameters (name/melody).4Select Save to store your settings.Brit02_EN.book Page 85 Thursday, February 23, 2006 5:02 PM
86PhonebookTo select a category when storing a number:Note: Categories can only be set for the Phone names cards (not for the SIM names cards).1Repeat the Phone names storage procedure (see "Storing names and telephone numbers", page 75) and fill in the Phone names card.2Scroll down to Categories and select OK.3Select one of the displayed categories from the list.4Select Save to store your settings.Brit02_EN.book Page 86 Thursday, February 23, 2006 5:02 PM
87PhonebookMy cardMy Card is a specific storage location where you can enter personal data. You can easily access My card and send its contents to another device via SMS or Bluetooth.My Card contents is identical to the phone cards contents except for the Categories and Voice dialling fields.To enter My Card data set:To send My Card by SMS or by Bluetooth:Note: Press and hold the up arrow key from the idle screen to access Send my card by SMS.1Press the Menu key. Select Phonebook.2Select My Card. 3Select View and enter the requested information as for a phonebook card (validate each entry by selecting OK).4Select Save to store your card.1Press the Menu key. Select Phonebook2Select My Card. 3Select Send by... SMS or Bluetooth, then enter the mobile number tosend the card to or select it from the Names list (SMS sending) or launch the connection with the required device (Bluetooth sending) and press OK.Brit02_EN.book Page 87 Thursday, February 23, 2006 5:02 PM
88PhonebookMy number(s) displayThe phone can display your main line (Line 1) mobile number, the mobile number for Line 2 (Alternate Line Service) and your data and fax numbers (these are SIM card dependent). These numbers may be stored in the SIM card. You can also enter them manually.To view, name and edit your own number(s),Note: Line 2, data and fax numbers can only be accessed if your SIM card has these subscriptions.Note: My numbers availability depends on your service provider.Fixed dialling numbersFixed dialling is a feature that restricts outgoing calls to 'fixed' numbers or 'prefixes' contained in SIM cards that support this feature. When the Fixed Dialling Numbers (FDN) feature is activated, dialling numbers, diverting calls and sending SMS to numbers not registered in the FDN list is forbidden. The number of FDN entries to be stored depends on the SIM card 1Press the Menu key. Select Phonebook.2Select My numbers. The mobile number for Line 1 is displayed if it is stored in the SIM card. If not, select Edit and enter your number and your name in (select OK to save the entered information).3Scroll down to view or enter Line 2, your fax and data numbers.Brit02_EN.book Page 88 Thursday, February 23, 2006 5:02 PM
89Phonebookcapacity. Activating the FDN feature or registering numbers in the FDN list is PIN 2 protected (contact your service provider to get the PIN 2 number).The following menu (Fixed dialling) and operations are only available on your phone if your SIM card allows fixed dialling.To activate or deactivate FDN operation:Note: The Fixed dialling sub-menu may not be available on your phone. Please contact your service provider for further details.To view the numbers stored in the FDN list:To add a new number to the FDN list:1Press the Menu key. Select Phonebook.2Select Fixed dialling. Select Status.3Select On or Off. Enter the PIN2 number.4Select OK to validate.1Press the Menu key. Select Phonebook.2Select Fixed Dialling.3Select View to view the FDN list entries. Pressing Options allows you to view, call, add a name, delete, copy or move numbers to the phone or SIM card memory, but also to send these numbers by SMS, or send a SMS.1Press the Menu key. Select Phonebook.2Select Fixed dialling.3Select Add new.4Enter you PIN2 code and press OK;5Fill in the displayed fields as in any SIM name card then select Save to store your settings.Brit02_EN.book Page 89 Thursday, February 23, 2006 5:02 PM
90PhonebookNote: Wild card spaces can be used with the numbers stored in the FDN list. E.g. number +441707 278_ _ 9 allows calls to all numbers from 278009 to 278999 to be dialled. The number can be edited and dialled from the idle screen. Note: You may be asked to enter your PIN2 code.ExportThe purpose of the Export feature is to allow you to send the phonebook contents to another device (e.g. a pc). You first need to export the card(s) to the Fun & Media box Others sub-menu (see "Others", page 107).Note: When exporting a Vcard file you can directly send it by Bluetooth or by SMS.1Press the Menu key. Select Phonebook.2Select Export..., then select Yes. The entire contents of the phonebook are exported and grouped together in a Vcard file and stored in Fun & Media box/Others.Brit02_EN.book Page 90 Thursday, February 23, 2006 5:02 PM
91CameraCameraThe camera application allows you to take pictures with your phone.These pictures can then be used to:•personalise your idle screen, your Welcome or your Goodbye screen (please see "Setting an image as an Idle screen, a Welcome screen or a Goodbye screen from the pictures folder", page 100),•be sent to other devices (mobile phones, pc) by E-mail (see "Mail system", page 53), MMS (see "Composing an MMS", page 54) or Bluetooth (see "Bluetooth", page 40).•match your phone cards (see "Phone names card", page 76).You can take pictures in 3 sizes: large (VGA: 640x480 pixels), normal (160x120 pixels) or portrait (60x80 pixels).Taking a pictureThe use of the camera and the sending, forwarding and reproducing of the pictures taken are subject to property and privacy rights. Do not take a picture unless authorised.1Press the Menu key. Select Camera.2Press OK to take your picture.Brit02_EN.book Page 91 Thursday, February 23, 2006 5:02 PM
92CameraOnce it has been captured, the picture is displayed. You can then access the following options sub menu: From another application:The Camera application can be activated from the Options menu whilst using other applications on the phone. The resolution types available vary according to the application. The camera-accessible applications are the following:options descriptionStoreTo store the picture.Send by...To send the picture by Mail, MMS or by Bluetooth.RenameTo change the name of the picture.Set as...To set the picture as an idle screen, a Welcome or a Goodbye screen image.DetailsTo view information about the name, resolution, size, date and file protection status.DeleteTo delete the current picture.CameraTo go back to the preview screen.Full viewTo see the picture on full screen.Zoom +/-To change the full view mode to a Smaller, Medium and Larger size.applications available resolutionPhonebookPortrait.Settings (idle, welcome or goodbye screen)Portrait and normal.i-mode mail and MMSAll.Brit02_EN.book Page 92 Thursday, February 23, 2006 5:02 PM
93CameraTo access the camera application from the Phonebook:To access the camera application from the Settings menu:To access the camera application from the Mail menu: Note: If a call is in progress, access to the camera is not possible.1Press the Menu key. Select Phonebook. 2Select Add name, then Phone names.3Once in the phone card, select Picture.4From the picture browser, select Options.5Select Camera.1Press the Menu key. Select Settings.2Select Display, then Idle screen, Welcome screen or Goodbye screen.3Scroll down to My Picture and select Pictures (left soft key).4From the picture browser, select Options.5Select Camera.1From the idle screen, select Mail (left softkey) or select i-mode then Mail. 2Select Compose mail, scroll down to the Attachment field, press OK and select Pictures.2’Or select Compose MMS, select SMIL, select Compose MMS and then Add image.3From the pictures browser, select Options.4Select Camera.Brit02_EN.book Page 93 Thursday, February 23, 2006 5:02 PM
94CameraAdjusting your pictureYou can adjust 4 types of settings before taking a picture: Resolution, Exposure, Brightness and Zoom. These settings must be entered from the preview screen.To select the picture size:To select the exposure mode:These modes allow you to optimise the picture quality according to the context.1Use the left or right arrow keys to select the Large (VGA), Normal or Portrait mode.2Press OK or press on the side key to take your picture.1Press the up or down arrow key to access the exposure mode selection.2Use the left or right arrow to access and select the Stnadard, Night, B&W, Antique, Reddish, Greenish or Bluish modes.3Press OK or press on the side key to take your picture.Brit02_EN.book Page 94 Thursday, February 23, 2006 5:02 PM

Navigation menu