Motorola Mobility T6FM1 Portable PCS GSM Transceiver with Bluetooth User Manual Scorpius E

Motorola Mobility LLC Portable PCS GSM Transceiver with Bluetooth Scorpius E

UserManual.wiki >

Motorola Mobility >

T6FM1 User Manual >

Exhibit 8D Users Manual

Contents

Exhibit 8D Users Manual

166MailMail Functions of FOMA Handset ...........................................................................168What is i-mode Mail? ................................................................................................168Displaying Mail Menu<Mail Menu>..........................................................................172Creating i-mode Mail/Deco-MailCreating and Sending i-mode Mail<Creating/sending i-mode mail> ...........172Creating and Sending Deco-mail<Deco-mail>...............................................174Creating Deco-mail Using Template<Template>............................................175Attaching a File<File attachment> ..................................................................175Receiving/Operating i-mode MailWhen i-mode Mail is Received<Automatic reception of mail>.....................176Selecting and Receiving i-mode Mail<Receive option>................................176Checking for i-mode Mails<Check new message>........................................177Replying to i-mode Mail<Replying i-mode Mail> ...........................................177Forwarding i-mode Mail to Another Destination<Forwarding i-mode Mail> ...............................................................................177Registering Mail Address to Phonebook........................................................178Replaying/Saving Melody from i-mode Mail<Save Melody>.........................178Displaying/Saving Image of Image Mail<Receiving Image Mail> .................178Replaying/Saving i-motion from i-motion Mail...............................................178Operating Mail BoxDisplaying Mails in Outbox/Inbox/Unsentbox<Outbox/Inbox/Unsentbox> .............................................................................178Configuring Mail SettingsSetting FOMA Handset Mail Functions<Mail setting>...................................184

167Using Chat MailChat Mail............................................................................................................186Creating and Sending Chat Mail<Creating/sending chatmail>.....................186Using SMS (Short Message)Creating and Sending SMS (Short Message) <Creating/Sending SMS> .....187Automatically Receiving SMS (Short Message)<Receiving SMS>...............188Checking for SMS (Short Message)<Check New SMS> ................................189Configuring SMS (Short Message) Settings<SMS Settings> .......................189

168MailMail Functions of FOMA HandsetFOMA handset provides 2 mail functions: i-mode mail and SMS.• Using i-mode mail requires i-mode subscription.• Using SMS requires no i-mode subscription.Sending and Receiving MailFOMA handset → FOMA handsetFOMA Handset → i-mode ServiceSMS sent from FOMA handset is received by mova service i-mode handset as i-mode mail.*: If "Report request" is set to "ON", SMS cannot be sent to mova.mova service i-mode handset → FOMA handsetShort mail* sent from mova service i-mode handset can be received by FOMA handset as SMS.*: Short mail is a service that allows to send and receive text messages between DoCoMo mobile phones.What is i-mode Mail?Upon subscription to i-mode, you can send and receive messages via internet as well as between i-mode handsets (including mova handsets). The default mail address specified at i-mode subscription is as given below.■When you have newly subscribed to i-modeA combination of random alphanumeric characters is succeeded by @. After subscription to i-mode, check your mail address.Example: abc1234 ... 789xyz@docomo.ne.jpChecking your mail addressiMenu" → "ENGLISH" → "Function" → "Mail Settings" → "Confirm Mail Address"• Between i-mode handsets (including mova handsets), mails can be sent and received using only the address preceding @.• When sending mails from PC, etc. to FOMA handset, use the whole address containing @docomo.ne.jp.■Receive optionYou can check subjects of i-mode mails stored in i-mode Center and select ones to be received or deleted without reception from the i-mode Center. →P176 FOMAhandset FOMAhandsetUp to 70 charactersi-mode MailUp to 5000 full-pitch charactersSMS SMSi-mode MailFOMAhandsetmova service i-mode handseti-mode MailUp to 2000 full-pitch characters*SMSi-mode Maili-mode MailFOMAhandsetmova service i-mode handsetUp to 50 full-pitch charactersi-mode MailUp to 250 full-pitch charactersShort mailDial Special number 1655i-mode MailSMSi-mode Mail×CMail addressdocomotaro@△△.□□□.co.jpPersonal computerAMail addressdocomo.taro△△@docomo.ne.jpBMail addressdocomo.△△_ab1234yz@docomo.ne.jpA B→B A→：docomo.△△_ab1234yz：docomo.taro△△Address between i-mode handsetsA C→C A→：docomotaro@△△.□□□.co.jp：docomo.taro△△@docomo.ne.jpAddress between i-mode handset and PCi-mode CenterXXXXX

169MailMail SettingYou can make various settings as described below.■Setting procedurei → "iMenu" → "Function" → "Mail Settings" → 【Each Setting】• For details, refer to "i-mode User's Manual".■Changing your mail address【Mail Address (Change Mail Address)】You can change characters preceding mark @ in a mail address, e.g., "docomo.△△_ab1234yz@docomo.ne.jp".■Confirm Mail Address 【Mail Address (Confirm Mail Address)】You can confirm the current mail address.■Registering secret code 【Mail Address (Other Settings) → Register a Secret Code】When using a mail address of format "mobile phone number@docomo.ne.jp", you can register 4-digit secret code in addition to the mail address. Because mails with no secret code attached are not received, you can avoid receiving unnecessary i-mode messages.■Resetting mail address 【Mail Address (Other Settings) → Reset Mail Address】You can set your mail address to "mobile phone number@docomo.ne.jp".■Spam Mail PreventionYou can restrict reception of messages by setting mail reception/rejection in one of the procedures given below.aReject/Receive Mail Settings 【Receiving Mail (Spam Mail Prevention) → Reject/Receive Mail Settings】• You can receive mails from one of carriers selected from au, Vodafone, DoCoMo, TU-KA and WILLCOM.• You can receive mails from the specified domain address of those sent from the carriers other than the above.(You can reject mail pretending to use a mobile phone or PHS domain from the Internet.)bSMS Rejection Settings 【Receiving Mail (Spam Mail Prevention) → SMS Rejection Settings】• You can restrict incoming SMS by selecting one from "Reject All SMS", "Reject Anonymous SMS", "Reject International SMS", and "Reject Anonymous and International SMS". You can also view the current settings.cRestricting reception of mails from mass i-mode mail senders 【Receiving Mail (Other Settings)→ Reject Mass i-mode Mail Senders】• You reject 201st and subsequent i-mode mails sent from one i-mode handset (including mova handset) a day. "Reject" is set by default, so you do not have to change the settings to reject messages sent from mass mail senders.dReject Unsolicited Ad Mail 【Receiving Mail (Other Settings)→ Reject Unsolicited Ad Mail】• You reject reception of mails with "Reject Unsolicited Ad Mail" description added to a mail subject which are sent unilaterally for advertisement and/or promotion without agreement of the receiver. "Reject" is set by default, so you do not have to change the settings to reject such messages. (Senders are obligated by law to give description Unsolicited Ad Mail (6 full-pitch characters) to the beginning of the mail subject field.■Limiting mail size [Receiving Mail (Limit Mail Size)]You can limit i-mode mails to be received with the predetermined size.■Confirm Settings [Receiving Mail (Confirm Settings)]You can check the current settings of mail reception/rejection and others.■Suspending mail function 【Suspend Mail】You can suspend the mail function in the i-mode Center when it is not necessary. ■Number of characters that can be sent/receivedThe number of characters that can be sent/received in i-mode mail is as listed below.*: The number of characters that can be sent/received will be reduced when a file such as melody, image, i-motion is attached or the text is decorated.• Up to 5000 full-pitch characters (10000 bytes) can be sent/received in i-mode mail text, but the number of characters that can be sent/received is reduced depending on the data size of an attached file. • When i-mode mail text exceeds the number of characters that can be received, "/" or "//" is inserted in the end of the text and the excessive part is automatically deleted.• When sending i-mode mail to a mova handset, the text can contain up to 2000 full-pitch characters. In addition, i-shot or i-motion mail is sent as a mail containing URL and other attachment files are deleted.• When the number of characters in a subject exceeds the allowable limit for reception, excessive characters are deleted.• Do not use half-pitch katakana or pictographs except in mails sent or received between i-mode handsets (including mova handsets). Such characters, if any, used for other terminals may not be displayed correctly on the receiver side.ItemsFull-pitch characters (kanji characters, hiragana characters, pictographs, etc.)Hal-pitch characters (alphabetic characters, numerals, katakana characters, etc.)Subject 15 characters 30 charactersDestination −50 charactersText 5000 characters 10000 charactersXXXXX

170MailWhen i-mode Mail Cannot Be Receivedi-mode mail delivered to i-mode Center will be immediately sent to your i-mode handset. Note that, however, when your i-mode handset is turned off or out of the service area, the i-mode mail is stored in i-mode Center. i-mode mail stored in i-mode Center is resent up to 3 times with a predetermined interval. In addition, Receive Option can also be used to select and receive i-mode mail stored in i-mode Center.• The maximum number of i-mode mails and storage period in i-mode Center are as listed below.• Expired i-mode mails are automatically deleted.• The maximum number of stored mail varies depending on the i-mode mail data sizes. When the maximum number of stored mails is exceeded, $★$ appears on the i-mode handset. At this time, i-mode Center does not receive an i-mode mail and returns it to the sender with an error message. Note that with Receive Option "ON", $★$ does not appear even when the maximum number of stored mails is exceeded.• You can receive i-mode mails stored in i-mode Center by "Check new message" or "Receive Option" settings. In addition, when a new i-mode mail is delivered, you can receive it together with other i-mode mails and Message R/F stored.• When i-mode mail stored in i-mode Center is received, it is deleted from i-mode Center.• i-mode message with an excessive size may not be accepted by i-mode Center.Other Convenient Functions■File attached mailMelody attached mailYou can send/receive a melody file downloaded from a site or Web site through mail attachment. Note that, however, a melody file whose mail attachment or output from FOMA handset is prohibited cannot be sent.Sending →P175 Receiving →P176Image attached mailYou can send/receive a still image file downloaded from a site or Web site through i-mode mail attachment. Note that, however, a still image file whose mail attachment or output from FOMA handset is prohibited cannot be sent.Sending →P175 Receiving →P176■i-shotYou can send/receive a still image shot with a terminal with Camera function to/from i-mode handsets (including mova handsets), PCs or mobile phones of other carriers. It is sent to the receiver as a mail of attachment file format or that containing URL (or icon) for image viewing with an image storage period described. When URL is sent, the image can be acquired by selecting the URL.A mail text sent to an i-mode handset of mova service can contain up to 184 full-pitch characters (369 bytes). When 2 or more files are attached, they are deleted and only the mail text is sent.Sending →P175 Receiving →P176*: When a mail containing URL of an attached image is received• The image is stored in i-shot Center a maximum 10 days and automatically deleted after expiration.• i-mode handset can send a still image of up to 500K bytes. When a message attached with an image exceeding 20K bytes is sent to an i-mode handset, it acquires an image with its size automatically reduced.i-motion MailYou can send/receive videos shot with an i-motion mail compatible handset or those acquired from sites to/from i-motion mail compatible handsets, PCs or mobile phones of other carriers. Note that, however, a video file cannot be sent if its mail attachment or output from FOMA handset is prohibited cannot beMaximum number of mails storedMaximum storage periodi-mode mails 207 to 1000 mails 720 hoursi-mode handset (FOMA)i-mode Centeri-shot Center i-mode handset (FOMA)i-mode handset (mova)PC, etc.aAttached image, or mail with the URL of the attached image, or mail with the icon (URL) of the attached imageSend a still image using i-shot Send an image as an attachmentbSelect the URL in mail (Web To function)*cImage data*InternetXXXXX

171Mailsent.Sending →P172 Receiving →P178■Service scheme• A video file attached to i-motion mail is sent to and stored in i-motion mail Center.If it is for a PC, etc., it is directly sent as an attachment file. When it is received by an i-motion mail compatible handset, a video can be acquired by selecting URL indicated in the message text.• When a video file attached to i-motion mail is sent to a handset incompatible with i-motion mail, it is received as a mail containing URL with i-motion converted to continuous still images. The receiver can acquire the continuous images by selecting the indicated URL.• Video is stored in i-motion mail Center for up to 10 days and automatically deleted after expiration.• An i-motion compatible handset can receive video of a maximum 500K bytes. The size of the received video is automatically converted so that it matches the screen of the i-motion mail compatible handset.■Deco-mailYou can create and send or receive enjoyable i-mode mail edited in a decorative manner such as changing the font size and/or background color or pasting an image in the text. Note that, a decorated mail received from a PC may not appear exactly in the same way as on the PC, because some decorations are not available on i-mode handsets. When a Deco-mail is sent to an incompatible handset, it is received as a mail containing URL. The receiver can view the Deco-mail by selecting the indicated URL.Editing/Sending →P174• Applicable models: Available on Deco-mail compatible handsets. For details, refer to "i-mode User's Manual".■Simultaneous mail sendingSame i-mode mail can be sent to multiple (up to 5) addresses at a time. →P173• The communication fee is the same as that for sending one i-mode mail. Note that the communication fee will increase for the information size of added destinations.■CC or BCC sending/receiving Similarly to PC, TO, CC and/or BCC can be selected as destinations. Note that mail with no TO destinations cannot be sent. →P173 ■Chat mailMail can be exchanged in a similar manners as chatting with multiple parties. →P186• The communication fee for exchanging chat mail with multiple parties is the same as that for simultaneous mail sending.■i-appli attached mailYou can activate i-appli from URL (link) pasted to received i-mode mail. →P157SMS (Short Message)You can send/receive text messages using only the mobile phone numbers without subscription to i-mode.Sending →P187 Receiving →P188 Checking →P189■SMS (Short Message) destinationSMS destination is "subscribed mobile phone number".• For destinations used for sending/receiving SMS to/from overseas carriers other then DoCoMo, see DoCoMo's web site. ■Number of characters that can be sent/receivedThe number of characters that can be sent/received in SMS is as listed below.■When SMS (Short Message) cannot be receivedSMS delivered to SMS Center will be immediately sent to your FOMA handset. Note that, however, when your FOMA handset is OFF or out of the service area, the SMS is stored in SMS Center.• The maximum storage period of SMS in SMS Center is 72 hours. The sender can specify the storage period. →P184• SMS expired is automatically deleted.• SMS stored in SMS Center can be received by SMS inquiry. →P189i-motion mail FOMA handseti-mode Centeri-motion Mail Centeri-motion mail FOMA handsetPC, etc.aMail with the URL of the attached video i-shot CenterSend as i-mode mail Send an image as an attachmentbSelect the URL in mail (Web To function)cAttached image or sequential still image dataInternetNon- i-motion mail handsetDestination 21 characters (including "+")SMS text entrysettingsFull-pitch character entry (70 characters)Half-pitch alphanumeric entry (160 characters)XXXXXContinued on the next page

172Mail• When SMS stored in SMS Center is received, it is deleted from SMS Center.Mail MenuDisplaying Mail Menuamy Perform the following operationsInboxDisplay an Inbox list screen. →P178OutboxDisplay an Outbox list screen. →P179UnsentboxDisplay an Unsentbox list screen. →P179Compose messageCreate a new i -mode mail. →P172Compose SMS messageCreate new SMS (Short Message). →P187ChatMailDisplay chat mail screen. →P186• When you use chat mail for the first time, the member setup screen appears. →P186Deco-mail templateDisplay Decorated mail template screen. →P175SwapCall up another function from mail menu. →P226Check new messageReceive i-mode mail stored in i-mode Center by i-mode check.→P177Check SMSReceive SMS stored in SMS Center by SMS check. →P189Receive optionYou can check subjects of i-mode mails stored in i-mode Center and select ones to be received or deleted without reception from the i-mode Center. →P176Message settingSet the mail function. →P184Creating/sending i-mode mailCreating and Sending i-mode Mail• To send with attached file → "Attaching a File" (P175)aMail Menu screen (P172) y "Compose message"bSelect the $★$ (Receiver) field y c y Enter the receiver• Enter up to 50 half-pitch characters.• After the address is entered, a new $★$ (Receiver) field is added automatically allowing you to send more than 1 recipient.Up to 5 addresses can be entered.• You can select and enter an address from the Phonebook or call logs. Press h [Function]. →P173cSelect the $★$ (Subject) field ycy Enter subject yc• Up to 15 full-pitch or 30 half-pitch characters can be entered.dSelect the $★$ (Message) field ycy Enter text yc• Up to 5000 full-pitch or 10000 half-pitch characters can be entered.• To decorate mail →P174ei [Send]• Characters may not be sent correctly to the receiver depending on the signal wave conditions.• Do not use half-pitch katakana and pictographs except for mail exchanged between i-mode handsets. These characters may not be displayed correctly.• The secret code is added automatically when the mail whose address is set with the secret code is sent. However, the address of the sent mail does not display the secret code.• If there is not enough free space, or if the maximum number of mail to be saved is exceeded, i-mode mail cannot be created. Delete unnecessary i-mode mail or SMS from folders in the Outbox. →P180• Even if i-mode mail is sent successfully, an error message indicating the mail could not be sent may appear depending on signal conditions.Mail Menu screenCompose message screenMessage entry screenXXXXX

174MailEnglish functionsSet English character entry function. "Turn on"/"Turn off" (Checking the specifications)PreviewDisplay preview screen of text being edited.•h [OK]: Display text edit screen. •i [Save]: Save as Deco-mail template.Deco-mailCreating and Sending Deco-mailYou can create your own designer mail by adding decorations such as changing font size, font color or background color, or inserting images when you edit i-mode mail messages.aPerform Steps 1 to 3 in "Creating and Sending i-mode Mail" (P172)bSelect the $★$ (Message) field y c y h [Function] y "Decorate mail"• Decorating operations →P174ci [Close]■To view set Deco-mailh [Function] y Select "Preview"■Cancel the set Decorationh [Function] y Select "Reset decorate"dcyi [Send]• When Deco-mail is sent to or received from a handset other than Deco-mail compatible i-mode handsets, decorations may not be displayed correctly.Decorating OperationsDecorate characters using the palette.You can decorate entered characters or select decoration before entering characters.■Enter characters then decorate themSelect "tennis" from the message and decorate the word.■Select decoration then enter charactersSelect decoration from the palette and apply it to characters to be entered after the cursor.In the screen on the right, the characters to be entered after "a tennis" will be decorated.PaletteThe following table describes operations for decorating mail using the palette:*: Unable to select" is displayed next to any decoration that cannot be set.aSelect decoration y c$★$ (Edit decoration) Specify the range of text to decorate.yMove the cursor to the front of the character to be selectedyh【Start】•i [Select All]: You can select all sentences.yMove the cursor to the back of the character to be selectedyh [End]•i [Return]: Returns to the previous operation. (Checking the specifications)•C: You can cancel the selection. (Checking the specifications)$★$ (Font color)Set a color of characters. y Select color y c y Enter characters$★$ (Blink)Make characters flashing.y Move the cursor to the starting point of flashing y c [Begin blink]y Enter characters y c [End blink]$★$ (Background color)Set a background color of mail text.y Select color y c$★$ (Insert image)Insert an image saved in "My Pictures" to mail text.$★$ (Undo)Restores a set decoration to previous setting.$★$ (Font size)Set a font size.y Select from "Large"/"Standard"/"Small" y cPalette display screenh [Message]/[Decorate]Each press of the key toggles between message entry and mail decoration.i [Close] Close the palette.Palette display screenXXXXX

175Mail$★$ (Word alignment)Set a position to enter characters or insert an image.y Select from "Left"/"Center"/"Right" y c$★$ (Ticker)Set a ticker to the text.y Move the cursor to the starting point of the ticker y c [Begin ticker]y Enter characters y c [End ticker]$★$ (Swing)Set swing to text.y Move the cursor to the starting point of the swing y c [Begin swing]y Enter characters y c [End swing]$★$ (Insert line)Insert a line in mail text. $★$ (Copy/Cut/Paste)(Checking the specifications)Select characters, images or lines and copy, cut or paste them.■ Select characters to be copied or cutSee "$★$ (Edit decoration)".■Pasting charactersy Select copied/cut characters y $★$y Select inserting position y $★$• When characters with "Ticker" or "Swing" set are selected and "Copy" or "Cut" is carried out, the settings for "Ticker" or "Swing" are not affected. TemplateCreating Deco-mail Using TemplateTemplates are form data for Deco-mail with decorations such as the font size and image insertion already set. In addition to templates preinstalled, you can use those downloaded from sites.• Templates preinstalled →P288aMessage entry screen (P172) yh [Function] y "Select template"bSelect a template yc The selected template is inserted in the message text.Creating/Editing a TemplateCreate original templates or edit saved templates.aThe Mail Menu screen (P172) y "Deco-mail template"Compose templateCreate a new template.y h [Function] y "Decorate"• Basic decorating operations →P174Template listEdit templates saved in the "Databox".y Select decoration y c y (Checking the specifications)File attachmentAttaching a FileYou can send i-mode mail attached with images or melodies.■File that can be attached*1: The total data size including melodies, images and text of these 10 files should not exceed 5000 full-pitch characters (10000 bytes). The number of files that can be attached differ depending on their data sizes.*2: One of image or video/i-motion of up to ●● Kbytes can be attached. It is counted as one, besides melodies and images of 10000 bytes or less.• A file prohibited to be attached to mail or to be output from FOMA handset cannot be attached.• When a JPEG format image or i-motion exceeding 10000 bytes is attached, the number of characters that can be entered to text is reduced by 100 full-pitch characters (200 half-pitch characters). When decoration is made, it is reduced by 200 full-pitch characters (400 half-pitch characters).• Up to 11 files can be attached to mail. It is reduced depending on the file sizes.Edit Decoration／Copy／CutFile type Maximum number of attached filesMelodyTotal of 10*1Image of 10000 bytes or smaller (JPEG or GIF)Image over 10000 bytes (JPEG) One of either*2Video/i-motion MovieDecorated mail template screenXXXXXContinued on the next page

176Mail* You need to obtain a microSD memory card separately to use the functions related to the microSD memory card. →P221aCompose message screen (P172) y $★$ (Attach) ycy Perform the following operationsAttach imageSelect a file from those saved in "My Pictures".Attach i-motionSelect a file from those saved in "i-motion".Attach melodySelect a file from those saved in "Melody".Snap photoShoot and attach a still image.y Shoot a still image y h [Insert]i [Discard]: Re-shoot a still image.Shoot movieShoot and attach a video.y Shoot a video y h [Insert]i [Discard]: Re-shoot a video.microSDSelect a file from those saved in microSD memory card.Deleting/Changing an Attached FileYou can delete, change, replay or confirm information of an attached file. aSelect an attached file ycPlay/Display : Replay/display a selected file.Change : Change a selected file.File properties: Display information about a selected file.Delete : Delete a selected file. Press h [Yes].Automatic reception of mailWhen i-mode Mail is ReceivedWhen FOMA handset is in a service area, i-mode mail is automatically sent from i-mode Center.aWhen i-mode mail is received, $★$ goes flashing and "Receiving messages・・・" appears. When reception has completed, the reception result appears on the screen.• Returns to the Standby screen if no operation is performed for 30 seconds.b"Mail"Display an Inbox list screen.• When new i-mode mail is delivered, other i-mode mail and/or Message R/F stored in i-mode Center are received at the same time.• i-mode mail allows to receive melodies and/or still images as attached files. Incompatible attached files are automatically deleted in i-mode Center.• When Receive Option for i-mode mail has been set, sent i-mode mail is stored in i-mode Center. You can confirm a subject, etc. of i-mode mail stored in Center and select and receive it. →P176• When received mails exceed the limit, they are overwritten from the oldest ones. Note that unread or protected mails are not overwritten.Displaying New i-mode Mail ReceivedaMessage Reception status screen (P176) y "Mail" y Select a folder y cbSelect mail to be displayed yh [Select]Receive optionSelecting and Receiving i-mode MailYou can confirm a subject, etc. of i-mode mail stored in i-mode Center and select mail to be received or delete it in i-mode Center before reception.• To use Receive Option, set "Receive Option" to "On" in advance. Note that when it is "On", i-mode mail cannot be automatically received. →P184Receiving message screenMessage Reception status screenInbox detail screenXXXXX

177MailaMail Menu screen (P172) y "Receive option"Subsequently, perform the operations in "i-mode User's Manual".• Receive option can also be carried out from "iMenu". Select "iMenu"→"English"→"Menu List"→"Receive option".• Even with Receive option set to "On", all mails are received when "Check new message" is used. When you do not want to receive mails, delete "Mail" from the inquiry items. →P184Check new messageChecking for i-mode Mailsi-mode mails, if any, that could not be received because FOMA handset was out of the service area or for other reasons are stored in i-mode Center. You can receive stored i-mode mails by checking to i-mode Center. • You cannot inquire from out of the service area.aMail Menu screen (P172) y"Check new message"When check has completed, the mail reception result appears on the screen.• When new i-mode mail is delivered, other i-mode mail and/or Message R/F stored in i-mode Center are received at the same time.• When received mails exceed the limit, they are overwritten from the oldest ones. Note that unread or protected mails are not overwritten.Replying i-mode MailReplying to i-mode MailYou can reply to i-mode mail sender. Replying can be made by entering new text or quoting the text of received i-mode mail. aReceived mail list screen (P179)/Inbox detail screen (P179) yh [Function]■Replying by quoting received mail textSelect "Reply with quotation".• When the mail has been sent to multiple receivers simultaneously, you can select "Sender" or "All".■Not quoting received mail textSelect "Reply".• You can reply to mail also by pressing i [Reply] on Inbox detail screen. • When the mail has been sent to multiple receivers simultaneously, you can select "Sender" or "All".bEntering subject and text yc• "Re:" is added to a subject.• When replying by quoting, ">" is added to the beginning of quoted text.• Editing subject and text → "Creating and sending i-mode mail" (P172).ci [Send]• When the storage capacity of Outbox has been exceeded, replying cannot be made. Delete mails saved in Outbox before replying.• You cannot send i-mode mail in self mode.• The reply to received Deco-mail with quotation has original decoration and images entered in the message text. However, restricted images and highlighted URLs will not be quoted.Forwarding i-mode MailForwarding i-mode Mail to Another DestinationYou can forward received i-mode mail to another party.aReceived mail list screen (P179)/Inbox detail screen (P179) yh [Function] y "Forward"bEnter destination yc• "Fw:" is added to a subject.• Editing destination and text → "Creating and sending i-mode mail (P172)ci [Send]• When a file whose mail attachment or output from FOMA handset is prohibited has been attached or pasted to i-mode mail forwarded, such file and information are deleted.• When the storage capacity of Outbox has been exceeded, forwarding cannot be made. Delete mails saved in Outbox before forwarding.• The forwarded Deco-mail has original decoration and images entered in the message text. However, restricted images and highlighted URLs will not be forwarded.XXXXX

178MailRegistering Mail Address to PhonebookYou can register sender's mail address, phone number and URL contained in text of received mail to phonebook.aInbox detail screen (P179) y Select mail address, phone number and/or URL to be registered in phonebook yh [Function] y "Save in Phonebook"bRegister to phonebookGo to Step 2 in "Saving Contacts to the Phonebook from Received Calls or Dialed Calls" (P94).Save MelodyReplaying/Saving Melody from i-mode MailPlaying MelodyaInbox detail screen (P179) y Select attached or pasted melody ycSaving MelodyaInbox detail screen (P179) yh [Function] y "Check attachment"List files attached to received mail.bSelect a melody file to be saved yi [Save]Receiving Image MailDisplaying/Saving Image of Image MailDisplaying an ImageaInbox detail screen (P179) y Select an attached image yc• An image larger than the display size is reduced for display. Note that, however, an image that is too large may not be displayed. (Checking the specifications)Saving an ImageaInbox detail screen (P179) yh [Function] y "Check attachment"List files attached to received mail.bSelect an image file to be saved yi [Save]Replaying/Saving i-motion from i-motion MailSelect URL contained in i-motion mail received, acquire i-motion stored in i-motion mail Center and save it.aInbox Detail Screen (P179) y Select URL ycy $★$ [Yes]Acquisition of i-motion starts.• When "i-motion auto playing setting" has been set to "Auto replay", i-motion is automatically replayed after acquisition.b"Save" y$★$ [Yes] (Checking the specifications)Outbox/Inbox/UnsentboxDisplaying Mails in Outbox/Inbox/UnsentboxDisplaying Mails in InboxAttached file list screenScreen to be insertedXXXXX

179MailUp to ●●● mail items including i-mode mails and SMS can be saved.• The number of items that can be saved varies depending on their data sizes.aMail Menu screen (P179) y "Inbox"bSelect a folder yc•s: Display the previous or next page when there are 2 or more pages.•i [Sort]: Sort mail by selecting keys such as received date and time, subject or sender. →P180cSelect a mail yc•j: Scroll the screen.•s: Display the previous or next mail.•i [Reply]: Reply to the sender and/or receivers of simultaneous mail sending.→P172, P187Displaying Outbox MailsUp to ●●● mail items including i-mode mails and SMS can be saved.• The number of items that can be saved varies depending on their data sizes.aMail Menu screen (P172) y "Outbox"bSelect folder yc•s: Display the previous or next page when there are 2 or more pages.•i [Sort by]: Sort mail by selecting keys such as sent date and time, subject or sender. →P180cSelect mail yc•j: Scroll the screen.•s: Display the previous or next mail.•i [Edit]: Display Compose message or SMS creation screen. →P172, P187Displaying Mails in UnsentboxMails created but not sent are saved. Up to ●● mail items including i-mode mails and SMS can be saved.• The number of items that can be saved varies depending on their data sizes.aMail Menu screen (P172) y"Unsentbox"bSelect folder yc•s: Display the previous or next page when there are 2 or more pages.•i [Sort]: Sort mail by selecting keys such as saved date and time, subject or sender. →P180cSelect mail yc•j: Scroll the screen.•s: Display the previous or next mail.•i [Edit]: Display Compose message or SMS creation screen. →P172, P187Inbox list screenReceived mail list screen Inbox detail screenOutbox list screenSent mail list screenSent mail detail screenUnsentbox list screen Unsent mail list screenUnsent mail detail screenXXXXXContinued on the next page

180Mail* You need to obtain a microSD memory card separately to use the functions related to the microSD memory card. →P221• To display contents of a folder with mail security set, enter the Security code.Sorting Mail in Inbox/Outbox/Unsentbox List ScreenSort mail by specifying keys such as chronological or reverse chronological order. (Checking the specifications)aInbox list screen (P179)/Outbox list screen (P179)/Unsentbox list screen (P179) y i [Sort]Received date (new>old)/Sent date (new>old)/Saved date (new>old)Sort mail in chronological order of received, sent or saved date.Received date (old>new)/Sent date (old>new)/Saved date (old>new)Sort mail in reverse chronological order of received, sent or saved date.Subject (ascending order)Sort mail in ascending order of subject.Subject (descending order)Sort mail in descending order of subject.Sender (ascending order)Sort mail in ascending order of sender.Sender (descending order)Sort mail in descending order of sender.Reading Box List/Mail List/Mail Detail ScreenIcons on Inbox/Outbox/Unsentbox List ScreenIcons on Received/Sent/Unsent Mail List ScreenFunction Menu on Inbox/Outbox List ScreenaReceived mail list screen (P179)/Outbox list screen (P179) yh [Function] y Perform the following operationsCreate folderCreate a folder.y Enter folder nameEdit folder nameEdit a selected folder name.y Enter folder nameAuto sortSet conditions for automatically saving mails in specified folders. →P185Sort foldersSort folders.y Select a folder to be sorted yh [Select] y Select location to move the folder yh [Define] yi [Complete]•i [Return]: Go back to the previous operation.Set security/Release securitySet or release security to the selected folder. Setting security requires the security code entry to view the contents of the folder.y Enter the Security Code■NoticeSaved contents may be lost by failure, repair or other handling of FOMA handset. DoCoMo is not liable to such loss and recommends you to store contents saved in FOMA handset to microSD memory card. They can be stored in a PC, if available, using data link software and FOMA USB connection cable (optional). Icons Description$★$ Folder containing unread mails/SMS$★$ Folder containing no unread mails/SMS$★$ Folder with security set$★$ Created folder containing unread mails/SMS$★$ Created folder containing no unread mails/SMS$★$ Mail-linked i-appli folderIcons Description$★$ Unread mail$★$ Read mail$★$ Unread SMS$★$ Read SMS$★$ Protected mail$★$ Replied mail$★$ Forwarded mail$★$ Mail with acquired image attached$★$Mail with acquired melody attached$★$ Mail with not acquired image attached$★$ Mail with not acquired melody attached$★$ SMS saved in UIMIcons DescriptionXXXXX

181MailDelete folderDelete a selected folder. Mail listDisplay contents of a selected folder.Delete All MessagesDelete all mail in Inbox/Outbox.y Enter the Security CodeSend all entriesSend all received mails by Bluetooth. (Checking the specifications)• Folders registered by default cannot be sorted or deleted.• A folder containing protected mails cannot be deleted.• When there is mail-linked i-appli, the folder for i-appli cannot be deleted.• Protected mails or SMS saved in UIM are not deleted. For a folder with security set, a confirmation message appears asking whether to delete it. Press h [Yes] to delete the folder.Function Menu on Received Mail List ScreenaReceived mail list screen (P179) y Select mail yh [Function] y Perform the following operationsReplyReply to mail. →P177Reply w/quotationReply to received mail quoting its contents.ForwardForward mail. →P177SearchSearch for received mail under set conditions.Protect/ReleaseProtect or release the selected mail.Move to folderMove a selected folder. y Select a move destination yh [Select]yh [Yes]Switch displaySelect information to be displayed on received mail list screen.y"Date/Subject/Sender"/"Date/Sender"/"Subject/Sender"Check addressDisplay addresses of the sender and simultaneous receivers of a selected mail. •h [Detail]: Display detail screen of a selected address. SendSend a selected mail via Infrared communication.UIMCopy or move a selected SMS to UIM/FOMA phone.Delete• Protected mails cannot be deleted.•Up to ●● mails can be protected.Function Menu on Inbox Detail ScreenaInbox Detail screen (P179) yh [Function] y Perform the following operationsReplyReply to mail. →P177Sort folders/Delete folderDelete folderDelete All MessagesSearch unreadSearch readSearch protectedSearch attachedRe-search*Release search*: Search for only unread mails.: Search for only read mails.: Search for only protected mails.: Search for only mails with file attached.: Search again.: Cancel searching state.ReleaseRelease all: Release the selected mail.: Release all mail.Create messageSave in PhonebookAuto sortRegister sending groupCopy E-mail: Reply to a selected address/phone number. →P177, P187: Register a selected address/phone number for phonebook. →P178: Set to automatically save a selected address/phone number to a specified folder under specified conditions. →P185: Register a selected address to a send group. →P185: Copy a selected address/phone number.Move to UIMCopy to UIMMove to PhoneCopy to Phone: Move SMS to UIM. Press h [Yes].: Copy SMS to UIM. Press h [Yes].: Move SMS to the phone. Press h [Yes]. : Copy SMS to the phone. Press h [Yes].DeleteDelete multipleDelete all: Delete a selected mail. Press h [Yes]. : Select and delete 2 or more mails. Select mails to be deleted ycyi [Execute]y Press $★$ [Yes].: Delete all messages in the folder, or delete all messages found using "Search". Enter the Security Code y Press $★$ [Yes].DeleteProtectXXXXXContinued on the next page

182MailReply w/quotationReply to received mail quoting its contents.ForwardForward a mail →P177Protect/ReleaseProtect or release the displayed mail.ScrollSet a number of lines to be scrolled. →P184Font sizeSet a font size. →P184Save to templateSave Deco-mail as a template. (Checking the specifications)Move to folderMove the displayed mail to another folder.ySelect a move destination yh [Select] yh [Yes]Check addressDisplay addresses of the sender and simultaneous receivers of a displayed mail.•h [Detail]: Display detail screen of a selected address. Check imageSave images contained in the displayed mail. Select an image then go to Step 2 in "Saving Images from a Site or Message" (P155).Check AttachmentList files attached to a displayed mail.•i [Save]: Save the selected file.Attached file list screen yh [Function] SendSend a displayed mail via Infrared communication.UIMCopy or move a selected SMS to UIM/FOMA phone.DeleteDelete a displayed mail. Save in PhonebookRegister a selected mail address/phone number to phonebook. →P178View URLDisplay URL of pasted to mail text. (Checking the specifications)•h [Copy]: Copy URL.• A large-size still image file or melody file attached to Deco-mail is deleted when saving the mail.• Protected mails cannot be deleted.•Up to ●● mails can be protected. (Checking the specifications)Function Menu on Sent Mail Detail ScreenaSent mail Detail screen (P179) y Select a mail yh [Function] y Perform the following operationsEditEdit and send a sent mail. →P172, P186SearchSearch sent mail under set conditions.Protect/ReleaseProtect or release the selected mail.Move to folderMove a folder.Switch displaySelect information to be displayed on sent mail list screen.y"Date/Subj./Sender"/"Date/Sender"/"Subject/Sender"Compose messageSave in PhonebookAuto sort: Reply to a selected address/phone number. →P177, P187: Register a selected address/phone number to phonebook. →P178: Set to automatically save a selected address/phone number to a specified folder under specified conditions.→P185Set upFile PropertiesDelete: Display a setup screen after saving a file. (Checking the specifications): Display information of a selected file.: Delete a selected file. Move to UIMCopy to UIMMove to PhoneCopy to Phone: Move SMS to UIM. Press h [Yes].: Copy SMS to UIM. Press h [Yes].: Move SMS to the phone. Press h [Yes].: Copy SMS to the phone. Press h [Yes].Save to templateDeleteProtectSearch protectedSearch attachedRe-searchRelease search: Search only protected mails.: Search only mails with file attached.: Search again.: Cancel searching state.ReleaseRelease all: Release the selected mail.: Release all mail.MoveMove multipleMove all: Move a selected folder. Select a move destination yh [Select] y Press h [Yes].: Select and move 2 or more mails. Select mails to be moved ycyi [Execute] y Select $★$ [Yes].: Delete all messages in the folder, or delete all messages found using "Search". Enter the Security Code y Press $★$ [Yes].XXXXX

183MailCheck addressDisplay addresses of the sender and simultaneous receivers of a selected mail. •h [Detail]: Display detail screen of a selected address. SendSend a selected mail via Infrared communication.UIMCopy or move a selected SMS to UIM/FOMA phone.DeleteDelete a sent mail.• Protected mails cannot be deleted.•Up to ●● mails can be protected. (Checking the specifications)Function Menu on Sent Mail List ScreenaSent mail display screen (P179) yh [Function] y Perform the following operationsCopyCopy contents of a displayed sent mail.Protect/ReleaseProtect or release the displayed mail.ScrollSet a number of lines to be scrolled. →P184Font sizeSet a font size. →P184Save to templateSave Deco-mail as a template. (Checking the specifications)Move to folderMove the displayed mail to another folder.ySelect a move destination yh [Select] yh [Yes]Check addressDisplay addresses of the sender and simultaneous receivers of a displayed mail. •h [Details]: Display detail screen of a selected address. Check imageSave images contained in the displayed mail. Select an image then go to Step 2 in "Saving Images from a Site or Message" (P155).Check AttachmentList files attached to a displayed mail.•i [Save]: Save a selected file.Attached file list screen yh [Function] SendSend a displayed mail via Infrared communication.Compose message (Compose SMS): Reply to a selected address/phone number. →P177, P187Save in PhonebookAuto sort: Register a selected address/phone number to phonebook. →P178: Set to automatically save a selected address/phone number to a specified folder under specified conditions.→P185Register sending group: Register a selected address to a send group. →P185Copy E-mail・Copy phone No.: Copy a selected address/phone number.Move to UIMCopy to UIMMove to PhoneCopy to Phone: Move SMS to UIM. Press h [Yes].: Copy SMS to UIM. Press h [Yes].: Move SMS to the phone. Press h [Yes].: Copy SMS to the phone. Press h [Yes].DeleteDelete multipleDelete all: Delete a selected mail. Press h [Yes].: Select and delete 2 or more mails. Select mails to be deleted ycyi [Execute] y Select $★$ [Yes].: Delete all messages in the folder, or delete all messages found using "Search". Enter the Security Code y Press $★$ [Yes].DeleteProtectAddressSubjectMessage: Copy a destination. When there are simultaneous receiver addresses, copy destinations from sent mail address confirmation screen.: Copy a subject.: Select and copy contents of text. →P264Compose message (Compose SMS): Send mail or SMS to a selected address/phone number. →P177, P187Save in PhonebookAuto sortRegister sending group: Register a selected address/phone number to phonebook. →P178: Set to automatically save a selected address/phone number to a specified folder under specified conditions. →P185: Register a selected address to a send group. →P185Copy E-mail・Copy phone No.: Copy a selected address/phone number.SetFile PropertiesDelete: Display a setup screen after saving a file. (Checking the specifications): Display information of a selected file.: Delete a selected file. XXXXXContinued on the next page

184MailUIMCopy or move a selected SMS to UIM/FOMA phone.Save in PhonebookRegister a selected mail address/phone number to phonebook.→P178DeleteDelete a displayed mail. • Items displayed on the function menu vary depending on the displayed mail.•Up to ●● mails can be protected.(Checking the specifications)• A large-size still image file or melody file attached to Deco-mail is deleted when saving the mail.• Protected mails cannot be deleted.Mail settingSetting FOMA Handset Mail FunctionsSet the mail and SMS functions.aMail Menu screen (P172) y "Mail setting"bh [Select] y Perform the following operationsCheck new messageSet items to be checked for "Check new message".ySelect the items to be checked yh [Select]Receive attachmentSet attachment files to be acquired when receiving mail, Message R/F, etc.Receive optionSet whether to set Receive Option.Melody auto playSet whether to automatically replay a melody attached or pasted to a mail received and displayed.y"Auto Play"/"Not auto play"Receive preferenceSet whether to display a receiving or reception result screen of a mail or Message R/F received during FOMA handset operation. SignatureSet a signature to be inserted to mail text. →P185Edit quotation markSet a symbol indicating quotation from a received mail used for replying by quoting.yEnter quotation mark Font sizeSet a font size for text on mail display screen.y"Large"/"Standard"/"Small"ScrollSet a number of lines to be scrolled when j is pressed on a mail detail or mail creation screen.Register sending groupRegister a mail address of a group. You can send a mail simultaneously to multiple members registered in the group.→P185SMS report requestSet whether to request for SMS delivery notification for SMS sent. →P189SMS message validitySet duration SMS is preserved in SMS Center. →P189SMS CenterSet SMS Center access point. →P189Move to UIMCopy to UIMMove to PhoneCopy to Phone: Move SMS to UIM. Press h [Yes].: Copy SMS to UIM. Press h [Yes].: Move SMS to the phone. Press h [Yes].: Copy SMS to the phone. Press h [Yes].ProtectSave to templateDeleteDefaultCheck new message: Checked All (Checking the specifications)Receive attachment: Image and MelodyReceive option: OFFMelody auto play: Auto PlayReceive preference: Prefer receive noticeFont size: StandardScroll: 1-lineMail setting screenImage and MelodyImageMelodyNot receive: Acquire images and melodies.: Acquire only images.: Acquire only melodies.: Acquires no attachment files.ONOFF: Do not automatically receive mails.: Automatically receive mails.Prefer receive noticePrefer user operation: Displays the Receiving screen and Received result screen.: Gives priority to the operation of the FOMA handset without displaying the Receiving screen and Received result screen.1-line3-line5-line1/2-page1-page: Scroll 1 line.: Scroll 3 lines.: Scroll 5 lines.: Scroll 1/2 page.: Scroll 1 page.XXXXX

187Mailci [Send]A sent chat mail appears in the top of the display.dReceive chatmaileh [Function] y "End Chatmail" y$★$ [Yes]Chat mail ends.• Communication fee for exchanging chatmail with multiple parties is the same as that for sending one mail. Note that the communication fee will increase for the information size of added destinations.Function Menu on Chat Mail ScreenaChat mail screen (P186) yh [Function] y Perform the following operationsSendSend chat mail.RenewalReceive chat mail.Check recent rcverConfirm destination of the latest mail.•h [Set]: Set a member again. Put $★$ on an address to be set as a chat member and press h [Complete].Member settingSet a chat member.Delete chatmailDelete a chat mail. Press $★$ [Yes].Quit chatmailEnd chat mail.Change font sizeChange a font size used for chat mail to "Standard character"/"Small character".Setting chat membersSetting Chat MembersTo perform Chat Mail, you need to register mail addresses to chat members in advance.• Up to 5 chat members can be saved.• When performing Chat Mail, from the Mail Menu screen (P172) → select "ChatMail".aChat mail screen (P186) y h [Function] y "Member setting"bh [Function] y Perform the following operationsRegister new entrySpecify the name and mail address for a new chat member.EditSpecify a nickname and font color.Deleteci [Complete]Creating/Sending SMSCreating and Sending SMS (Short Message)Create and send SMS.• You can send and receive SMS to/from parties of overseas carriers other than DoCoMo. See DoCoMo's web site for countries and overseas carriers available.aMail Menu screen (P172) y "Compose SMS message"Screen after sending chatmailScreen to be insertedSearch a phonebookDirect entryHistory of sent mails: Select from a Contact.: Directly enter the mail address and name.: Select from sent addresses.History of received mails: Select from received addresses.Group reference : Select from sent groups.NicknameAddressFont Color: Enter a nickname.: Edit the address of a member.: Select a font color for a member from 30 colors. Delete OneDelete All: Delete the selected member. Press $★$ [Yes].: Delete all registered members. Press $★$ [Yes].Member setting screenCompose SMS message screenXXXXXContinued on the next page

189MailCheck New SMSChecking for SMS (Short Message)SMS, if any, that could not be received because FOMA handset was out of the service area or for other reasons are stored in SMS Center. You can receive stored SMS by checking to SMS Center.• You cannot check from out of the service area.aMail menu screen (P172) y "Check SMS"When check has completed, the mail reception result appears on the screen.• When new SMS is delivered, other i-mode mail and/or Message R/F stored in i-mode Center are received at the same time.• When received mails exceed the limit, they are overwritten from the oldest ones. Note that unread or protected mails are not overwritten.SMS SettingsConfiguring SMS (Short Message) Settings SMS Report RequestSet whether to request an SMS delivery report after sending SMS. If this option is set to "ON", a message indicating that the SMS has been delivered to the recipient will be sent to you.aMail setting screen (P184) y "SMS report request" y "ON"/"OFF"SMS message validitySet the duration that a sent SMS can be kept undelivered at the SMS center.When "For 0 day" is set, SMS will not be kept undelivered at the SMS center.aMail setting screen (P184) y "Message validity" y "For 0 day"/"For 1 day"/"For 2 days"/"For 3 days"SMS CenterSet the SMS center address.aMail setting screen (P184) y "SMS Center"DoCoMo : Set DoCoMo as SMS Center address.Others : Enter the address.• To set "Type of Number" to "International", enter "+" at the beginning of the address. If the address contains "*" or "#", "International" cannot be set.Default OFFDefault For 3 daysDefault DoCoMoYou usually do not need to change this setting.XXXXX

191i-appliWhat is i-appli? .........................................................................................................192Downloading i-appli from Site .................................................................................193Activating i-appli .......................................................................................................194Automatically Starting i-appli<Auto-Start> ............................................................195Setting the i-appli Standby Screen<Stand-by> ......................................................196Managing i-appli<i-appli Settings>..........................................................................197Using Various Functions of i-appli..........................................................................197

192i-appliWhat is i-appli?By downloading i-appli from site, i-mode compatible FOMA handset (hereinafter, referred to as i-mode handset) can be made more convenient. For example, you can enjoy various games downloaded to i-mode handset and automatically check price by downloading i-appli for stock price information. In addition, map i-appli downloads only necessary data, allowing smooth scrolling. Some i-appli allows to directly register data to phonebook or schedule or link with Databox for saving and acquiring images.• Downloading i-appli →P193• Activating i-appli →P194• Automatically activating i-appli →P195• Some i-appli may use a serial No. of i-mode handset phone/UIM.• Some i-appli may perform communications during execution. You can set to disable communications. →P196■Using registered dataSome i-appli software may be able to refer to, register or operate your i-mode handset registration data (phonebook, bookmark, schedule, images). Following operations are enabled using registration data:• Phonebook registration• Bookmark registration• Schedule registration• Image acquisition from Databox• Image saving to Databox• Melody saving to DataboxWhat is i-appliDX?With i-appliDX, you can use i-appli more conveniently in such manners as to create mail with your favorite character screen or let you notified of the sender of received mail with a character's comment by linking with i-mode handset information (such as mail text, sent/received mail history, redial, phonebook data) or to update necessary information such as stock price or promote real-time progression of games by linking with mail.■Using registered dataSome i-appliDX software may be able to refer to, register or operate registration data such as mails, sent mail history, received mail history, ring alert, in addition to registration data available to ordinary i-appli (phonebook, bookmark, schedule and images).Following operations are enabled using registration data:• Phonebook registration• Phonebook referencing• Icon information• Bookmark registration• Schedule registration• Using mail menu• Using Compose message screen• Referencing latest sent mail history• Referencing latest received mail history• Referencing latest unread mail• Saving ring alert• Changing ring alert (phone, mail, message)• Image acquisition from Databox• Image saving to Databox• Changing screen settings (the stand-by display, incoming/outgoing calls, mail send/reception, Message R/F reception)• i-appliDX may perform communications regardless of software communication settings to confirm software validity. The communications count and timings differ from software.What is Mail-linked i-appli?Mail-linked i-appli, a kind of i-appliDX, allows you to use i-appli more conveniently in such manners to update in real-time the information such as stock price and progression of games by exchanging information with i-mode mail.• Mails used with mail-linked i-appli may not be displayed correctly.Other Convenient Functions■i-appli Standby screenYou can receive mails and make calls using i-appli as the stand-by display. You can make the IP (Information Provider)i-mode Centeri-mode handseti-appliDownloadGames, stock price information, etc.XXXXX

193i-applistand-by display more convenient by setting latest news or whether information on the wallpaper screen or letting your favorite character inform you of mail reception and alarms. →P196• This function is available with i-appli compatible with the i-appli Standby screen.■Automatically starting i-appliYou can automatically start software at a specified time, date or day of week. Some software can be automatically started at a time interval predefined in the software. →P195■Using cameraYou can use i-mode handset Camera from i-appli.• This function is available with i-appli compatible with Camera function.■Infrared communicationYou can communicate with a device installed with Infrared communication function using the software. →P223• This function is available with i-appli compatible with Infrared communication function.• Depending on the other party's device, communications of some data may be disabled even with Infrared communication function installed.■Infrared remote controlYou can operate various device from i-appli such as household electrical appliances compatible with infrared remote control. →P195For example, "Gガイド番組表リモコン (G-Guide Program List Remote Controller)" registered by default can be used as a remote TV controller linked with TV program. →P195• This function is available with i-appli compatible with infrared remote control function. The other party's device must have related software.Downloading i-appli from SiteYou can download software from a site and save it to FOMA handset.• You can register ●● to up to ●●● software items downloaded (the number of items that can be saved may be reduced depending on the software date size).aDisplay a site containing i-appli y Select software yc•h [Cancel]: Cancel downloading.bAfter downloading has completed yi [OK]■When software setup screen appearsSet "Set stand-by", "Network set" and "Stand-by net". Each setting can also be performed from "Permissions". →P195, P196•h [Change]: Change the settings.•i [Complete] : Complete the settings.ch[Yes]The downloaded software starts.■Downloading mail-linked i-appliThe folder for i-appli mail is automatically created in the inbox/outbox list if you download mail-linked i-appli. The folder name will be the title for the downloaded mail-linked i-appli, which cannot be changed. • If there are ● folders for i-appli mail in the inbox/outbox list, mail-linked i-appli cannot be downloaded.• If mail security is activated, you need to enter the Security Code for download. (Checking the specifications)■Re-downloading mail-linked i-appliIf you attempt to re-download mail-linked i-appli with only the folder for i-appli mail left, you can use the existing folder for i-appli. If you do not want to use the existing folder for i-appli mail, delete the folder and create a new one for i-appli mail. You cannot download mail-linked i-appli without creating a new folder. (Checking the specifications)• At downloading, the conformation screen might appear asking whether to send the "serial number of your mobile phone/UIM". Select "Yes" to start downloading. In this case, the "serial number of your mobile phone/UIM" is sent to the ISP (Internet Service Provider) over the Internet, so could be deciphered by third parties. However, your phone number, address, age, and gender are not notified to the ISP (Internet Service Provider) or others by this operation. • At downloading, the confirmation screen might appear asking whether to use the phone-information data (stored data and serial number of your mobile phone/UIM). Select "Download" to start downloading. Select "Details" to check the details of the phone-information data you want to use. • If you attempt to re-download the software that was downloaded with a different UIM, the confirmation message appears asking whether to overwrite it. Select "Yes" to display the screen to check the version and size of the software. Select "Download" to download. • If download of i-appli fails due to the conditions of the radio waves, etc., the i-appli is not saved in you FOMA handset.• You cannot download if the maximum number of software is saved or there is not enough memory space available. Download after deleting the saved software. • Some software automatically carries out transmission after downloaded. You can change the settings in "Network set" of "Permissions" not to automatically carry out transmission. →P195XXXXX

194i-appliActivating i-appliacy $★$ (i-appli)bSelect software yc•p: Terminate the software. Select "Resume" or "End".■Icons on software list screen• At i-appli launch, the confirmation screen might appear asking whether to upgrade the software to the latest one. Select "Yes" or "No".• You cannot start up software downloaded using a different UIM. • Some i-appli DX software automatically does communication to confirm the validity even if "Network set" is set to "Not". Communication frequencies and timing vary depending on the software.• If communication frequencies are extremely many within a certain period of time during i-appli launch, the confirmation screen appears asking whether to continue communication. Press h [Continue] to continue communication. Press i [End] to end the i-appli.Function Menu on Software List ScreenaSoftware list screen(P194)y Select software yh [Function] yPerform the following operationsUpgradeUpgrade the software. Press h [Yes].DeleteDelete software. →P196Auto-startSet the auto start method and auto start date and time for the selected software. →P195Stand-bySet selected software on the i-appli Standby screen. →P196Software InfoDisplay selected software information such as name, version, size.PermissionsSet communications and/or i-appli To function for selected software. →P196• At version upgrade, the conformation screen might appear asking whether to send the "serial number of your mobile phone/UIM". Select "Yes" to start downloading. In this case, the "serial number of your mobile phone/UIM" is sent to the ISP (Internet Service Provider) over the Internet, so could be deciphered by third parties. However, your phone number, address, age, and gender are not notified to the ISP (Internet Service Provider) or others by this operation.Software Preinstalled (Checking the specifications)i Pictograph Mail(Checking the specifications)Ope it out(Checking the specifications)Hungry Fish(Checking the specifications) Guide Program List Remote ControllerIcons Description$★$i-appli$★$i-appliDX$★$Mail-linked i-appli$★$i-appli that can be set on the wallpaper screen$★$i-appliDX that can be set on the wallpaper screen$★$Mail-linked i-appli that can be set on the wallpaper screen$★$i-appli set on the wallpaper screen$★$i-appliDX set on the wallpaper screen$★$Mail-linked i-appli set on the wallpaper screen$★$i-appli/i-appliDX/mail-linked i-appli with automatic start set$★$i-appli/i-appliDX/mail-linked i-appli downloaded from SSL siteSoftware list screenScreen to be insertedUpgradeXXXXX

195i-appliThis is a convenient application which combines a TV program list and a TV remote controller, and is free of monthly usage charges.You can obtain TV program information for any time slot, from anywhere and at anytime. You can acquire information on a program title, program description, start and end times and the G-code for your local TV station.When you find a program of interest, you can send mail, using the "Recommendation Mail" function, with the program title and broadcast schedule to your friends. You can also control your TV remotely (some models cannot be controlled).• When using this application for the first time, you need to configure the settings and agree to the license agreement.• Separate packet communication charges apply.• For details, refer to the "i-mode Operation Guide".■Infrared Remote ControllerYou can use the FOMA handset as a remote controller of infrared remote controlled devices. An i-appli sends remote control signals using the infrared port.• In order to use a remote controlled device, you need to download software that is designed for the device. Key operations for remote control vary depending on the software.• Some devices may not be controlled.• Depending on the controlled device or ambient brightness, communications may not be possible.• When Self-mode is set, the infrared remote controller cannot be used.• Point the infrared port of the FOMA handset directly in front of the device’s infrared sensor to operate.Software SettingsSetting i-appli Operating ConditionsSet operating conditions for each software. You can set to make communications automatically while software is active or whether to start i-appli via infrared communications.aOn software list (P194)y Select software y "Permissions"y Select the following itemsyh [Change]Network setSet whether to make communications while software is active.y"Yes"/"No"/"Once"Stand-by netSet whether to make communications while the i-appli Standby screen is active.y"Yes"/"No"Start from browserSet whether to start software from site.y"Yes"/"No"Start from mailerSet whether to start software from a mail.y"Yes"/"No"Start from IRSet whether to start software via infrared communications.y"Yes"/"No"Start from BarcodeSet whether to start software from barcode reader.y"Yes"/"No"Change ring/imageSet whether to allow, when software is started, to automatically change an image and/or melody set for ring alert or on the wallpaper screen.Phbook/Dials acc.Set whether to allow to reference the phonebook and reception history when software is started.y "Yes" y "No"Auto-StartAutomatically Starting i-appliThere are 2 types in automatic start:• Automatic start by software function• Automatic start by FOMA handset settingsSetting whether to Automatically Start Set whether to allow automatic start of softwareacy$★$ (Settings)y"i-appli Settings"y"Auto-start"yh [Change]On : Permit Auto-start.Off : Do not permit Auto-start.DefaultNetwork set: YesStand-by net: YesStart from browser: YesStart from mailer: YesStart from IR: YesStart from Barcode: YesChange ring/image: YesPhbook/Dials acc.: Yes (Checking all the specifications)90°15°15°Infrared portInfrared reception partApprox. 4 metersYesNo: Automatically change ring alert and/or the stand-by display settings. To let display a confirmation screen for each change, successively select h [Yes].: Do not automatically change the settings.XXXXX

196i-appliSetting Start Date/TimeValidating Automatic Start Date/Time Set in SoftwareWhen automatic start previously set for software is allowed, the software automatically starts at the date/time set in the software.aSoftware list screen (P194)y Select software yh [Function]y"Auto-start"b"Permissions"yh [Edit]y"On"/"Off"yi [Complete]Setting Software Start Date/Time on FOMA HandsetSet to automatically start software at the set date/time.aSoftware list screen (P194)y Select software yh [Function]y"Auto-start"b"User"yh [Edit]Off : Do not set Auto-start.Once : Set to start only once.Daily : Set to start every day.Weekly : Set to start every week.Monthly : Set to start every month.Yearly : Set to start every year.cPerform the following operationsUserSelect a repeating pattern of Auto-start using s.DaySet the date. Press h [Change].y Use s to select "Year", "Month" or "Day" field y Select a number using j y h [OK]DaySet a day of the week using s.TimeSet the time. Press h [Change].Softwarey Use s to select "Hour", "Minute" or "am/pm" field y Select a number using j y h [OK]di [Complete]• 10 minutes before or after an automatic start time set for other software cannot be set.• Software is not started at a automatic start time if other software is active at that time. An i-appli start failure icon appears in the top of the display. To delete the icon, press cy$★$ (i-appli)yh [Detail]. Note that the start failure history is not deleted. →P197Stand-bySetting the i-appli Standby ScreenaSoftware list screen (P194)y Select software yh [Function]y"Stand-by" y"ON/OFF"• Only one software item can be set on the i-appli Standby screen.• Some software may not be set on the i-appli Standby screen.• Site connection from the i-appli Standby screen is disabled.• When software for communication is set on the i-appli Standby screen, it may not function correctly for some signal conditions.• When "Stand-by net" is set to "Not", timely information may not be provided.Starting the i-appli Standby ScreenActivate software set on the i-appli Standby screen.aOn the opened i-appli Standby screen yC yh [Yes]■Exiting active i-appliPress p.• Resume: Return to software running screen.(Checking the specifications)• End: Return to the i-appli Standby screen.(Checking the specifications)• Remove from stand-by: Cancel the i-appli Standby screen.(Checking the specifications)• Some software may allow to return to the i-appli Standby screen state by key operations while the i-appli Standby screen is ON. Note that the i-appli Standby screen cannot be restored while other menu function is active.Deleting i-appliaSoftware list screen (P194)ySelect software yh [Function] y"Delete" yPerform the following operationsDefault Off (Checking the specifications)Default Off (Checking the specifications)XXXXX

197i-appliDelete OneYou can delete the selected software. Press h [Yes].Delete SeveralYou can select and delete multiple software programs. Select software to delete y Press c y i [OK] y $★$ [Yes]Delete AllYou can delete all the software saved.yEnter the Security Code y h [Yes]i-appli SettingsManaging i-appliYou can set up/manage the software saved in the FOMA handset.acy$★$ (Settings)y"i-appli Settings"y Select the following items yh [Change]Sort bySort software items displayed on software list screen.Auto-startSet whether to automatically start software. →P195Softw. info displaySet whether to display software information when downloading the software.y"On"/"Off"LightsSet lighting used while software is active. y"Light Phone Settings"/"Software Settings"VibrateSet vibrator operation type used while software is active.y"Phone Settings"/"Software Settings"Start failure historyDisplay a log of software failures to auto-start.•h [Function]: You can copy or delete the entries of Start failure history. y Select "Clear All"/"Copy All Text".Abnormal exit historyDisplay a log of abnormal termination of the i-appli Standby screen.•h [Function]: You can copy or delete entries of the Abnormal exit history. y Select "Clear All"/"Copy All Text".Security error historyDisplay a log of errors of software terminated due to a security error.•h [Function]: You can copy or delete the entries of Security error history. y Select "Clear All"/"Copy All Text".Trace outputDisplay the trace information of the software.•h [Function]: You can copy or delete the contents of the trace information. y Select "Clear All"/"Copy All Text".• Trace information does not appear if it does not exist.Using Various Functions of i-appliYou can connect to a site and use FOMA function while i-appli is active.• For some i-appli, operations may be different or disabled.Starting up Other Software from i-appliYou can start up software saved in the FOMA handset during i-appli launch. a Select a running i-appli y c yh [Yes]The software list screen is displayed.bSelect that the software yh [Yes]Displaying Site i-appli from Site• You have to download related i-appli in advance.aSelect URL during i-appli launchy$★$ yh [OK]Software exits and site appears.Using Barcode Reader from i-appli• You have to download related i-appli in advance.aStart barcode reader from i-appli (Checking the specifications)A screen appears indicating that the read data will be used and saved by i-appli.bRead codeDefaultSort by: Name Auto-start: OnSoftw. info display: OffLight: Phone SettingsVibrate: Phone Settings (Checking all the specifications)NameSizeDownloaded TimeAccess Time: Sort software items by name.(Checking the specifications): Sort software items in an descending order of size.(Checking the specifications): Sort software items by download date.: Sort software items by date of use.Trace outputXXXXX

199i-ChannelWhat is i-Channel?....................................................................................................200Using i-Channel.........................................................................................................201Setting i-Channel<i-Channel Setting>.....................................................................201

200i-Channel XXXXXWhat is i-Channel?This is a service provided by DoCoMo or IP (Information Service Provider) to deliver news and/or weather information as graphical information to handsets compatible with i-Channel.Information is periodically received and latest information is displayed as ticker on the wallpaper screen; in addition, it can also be displayed in a channel list by pressing h. Moreover, rich detail information can be acquired by selecting favorite channels from a channel list.• For precautions and details of using i-Channel, see "i-mode User's Manual".* Screens shown are images. They differ from actual ones.aWhen you have not subscribed to i-ChannelbAfter you have subscribed to i-Channel, ticker appears on the wallpaper screen at a timing information is received or channel list is displayed.cA channel list is displayed by pressing h. You can view in list format information, etc. given in ticker of each channel.dYou can view detail information screen of each channel by selecting it.ChannelThere are 2 types of channels: "Basic Channel" and "Favorite Channel"."Basic Channel" is channel provided by DoCoMo. Because it is registered by default, it is immediately available upon subscription to i-Channel. Packet communication fee charged for automatic update of information delivered for "Basic Channel" is contained in i-Channel service fee."Favorite Channel" is provided by IP (Information Service Provider) other than DoCoMo and available when you register a favorite one. Packet communication fee charged for automatic update of information delivered for "Favorite Channel" is not contained in i-Channel service fee.Information that can be displayed as ticker on the wallpaper screen is only that of "Basic Channel".• i-Channel is a chargeable service requiring subscription (i-mode contract is necessary for subscription).• Operations →P201• Applicable models: 701i, 902i, 702i Series, P851i• Some "Favorite Channel" may require information fee for using. • Some "Favorite Channel" may require separate subscription to IP (Information Service Provider) that provides information for use. • Both "Basic Channel" and "Favorite Channel" require packet communication fee for viewing detail information from a channel list besides i-Channel service fee. Trial ServiceWhen you use an i-Channel compatible handset and have subscribed to i-mode, but not to i-Channel for the subscriber line using the i-Channel compatible handset, you can use "Basic Channel" for a predetermined period of time without service fee. Note that you will be charged packet communication fee for viewing detail information from a channel list.Trial service will be started automatically in principle when a predetermined period of time has elapsed after inserting UIM and starting to After the service subscription procedures have been completedBefore subscribing to the serviceabcdAccessIP (Information Provider)i-mode handset i-mode CenterFavorite Channel InformationBasic Channel Information

201i-Channel XXXXXuse i-Channel compatible handset. When it is not started automatically, press h to start it.Trial service can be used only once for one subscriber line. Trial service will be terminated automatically when a predetermined period of time has elapsed after the start. For the procedure to terminate it halfway, see "i-mode User's Manual".• For precautions and details of using the trial service, see "i-mode User's Manual".Using i-ChannelWhen you have subscribed to i-Channel, information automatically appears as ticker on the wallpaper screen upon reception of information.• To automatically display ticker, set "Ticker display set" to "ON". →P201• When "Phone Lock" or "UIM PIN" is On, no ticker appears on the wallpaper screen even with "Ticker display set" set to "ON". Enter Handset Security Code to display ticker. (Checking the specifications)• The ticker cannot be displayed when an i-appli Standby screen is set.ahbSelect a channel item y cThe site is connected and detail information appears.•l: The channel list screen returns.• Even when information is received, no ring alert or vibrator operates. In addition, reception lamp does not go ON or flashing.(Checking the specifications)• Information may not be received when the FOMA handset is turned off, or when the signal reception is weak such as while out of the service area. In this case, select a channel for non-subscribers that appears by pressing h to receive information. The ticker on the Standby screen will show the information automatically. Also, information may not be received using the default settings. In this case, press h to receive information. The ticker on the Standby screen will show the information automatically.• Depending on the operating conditions, information may be received at the timing a channel list is displayed.•If you change the connection destination in "Host setting" of "i-mode setting", the connection destination of i-Channel is also changed. (Normally, you do not need to change the settings).• A message to the effect of failure of channel information acquisition may appear in the following cases: - When i-Channel connection destination has been changed- When the handset has been initialized- When UIM has been replacedi-Channel SettingSetting i-ChannelYou can set whether to display ticker on the wallpaper screen or set the ticker display style.aChannel list screen (P201) y h [Function] y Perform the following operationsTicker display setSet whether to display channel information in the ticker style on the wallpaper screen.y "ON"/"OFF"Ticker speed setSet the ticker moving rate.y "Low speed"/"Usually"/"High speed"Ticker displaySet font color and/or background color of ticker.SwapCall up another function such as phonebook or mail. →P226• When "Default" is selected, the default color is used. TickerhChannel list screenDefaultTicker display set: ONTicker speed set: UsuallyTicker display: Font Color (Green)/Background Color (Black)Font ColorBackground Color: Select a font color or "Default"y h [Select].: Select a background color or "Default"y h [Select].Telop display

202Data Display, Edit, Management/Music PlaybackDatabox......................................................................................................................204Still ImagesDisplaying Images<Picture Viewer> ...............................................................204Editing Still Images<Edit Still Images>...........................................................207Video Clips/i-motionPlaying Videos/i-motion Movies<Video/i-motion Player> .............................208Editing Videos/i-motion Movies<Edit Videos/i-motion Movies> ..................210Using Albums<Picture Albums/i-motion Movie Album>...............................211Chara-denWhat is Chara-den?<Chara-den>....................................................................213MelodyPlaying Melodies<Melody Player> ..................................................................214Creating a Playlist<Playlist>............................................................................216Voice NotesUsing Voice Notes<Voice Notes>....................................................................218microSD Memory CardmicroSD Memory Cards ...................................................................................221Inserting/Removing a Memory Card ...............................................................221Structure of Folders on the Memory Card......................................................222Using a Memory Card.......................................................................................222Reading and Writing to a Memory Card .........................................................222

203Exchanging Data via Infrared Communication/Cable ConnectionInfrared Communication<Infrared Communication>.....................................223Exchanging Data One Piece at a Time<Ir data/IrDA link> .............................223Exchanging All Data<Send All/Receive All> ..................................................224

204Data Display, Edit, Management/Music Playback XXXXX* You need to obtain a microSD memory card separately to use the functions related to the microSD memory card. →P221DataboxThe Databox contains the items and folders shown in the following table. Data obtained from sites or i-mode mail are saved in folders according to their respective types.Function Menu on the Databoxacy $★$ (Databox) yh [Function] y Perform the following operationsNow Playing/HideShow or hide the Playback screen for the melody played in background. →P214Rename microSDSpecify a name to the initialized microSD memory card.Format microSDFormat the microSD memory card.Free SpaceDisplay the free space on the handset or the microSD memory card.Picture ViewerDisplaying ImagesYou can display still images you have captured, or obtained from sites or i-mode mail. ■Available file formats*: Even if a file is in a compatible file format, it may not display, depending on the file.My PicturesPictures (All) All still images saved in My PicturesCamera Still images captured by the Camerai-mode/Other Still images obtained from sites, via Email or data communicationsPre-installed Still images provided by defaultPicture Albums Most ViewedUser-created picture albumsi-motioni-motion (All) All videos/i-motion movies saved in the i-motion folderCamera Videos captured by the Video Camerai-mode/Other Videos obtained from sites, via Email or data communicationsPre-installed Videos provided by defaulti-motion Albums Most ViewedUser-created i-motion albumsMelodyMelody (All) All melodies saved in Melodyi-mode/Other Melodies obtained from sites, via Email or data communicationsPre-installed Melodies provided by defaultPlaylists Most PlayedUser-created playlistsArtists Lists per artistsAlbums Lists per albumsGenres Lists per genreComposers Lists per composersChara-denChara-den (All) All Chara-den saved in Chara-deni-mode/Other Chara-den obtained from sites, via Email or data communicationsPre-installed Chara-den provided by defaultAnimationsAnimations (All) All Flash movies saved in Animationi-mode/Other Flash movies obtained from sites, via Email or data communicationsPre-installed Flash movies provided by defaultVoice NotesVoice Notes (All) All Voice Notes saved in Voice NotesMy Notes User-created categories■NoticeStored content may be lost due to the handset failure, repair or mishandling. DoCoMo is not responsible for lost data. It is recommended that you keep saved content from the FOMA handset on a microSD memory card. You can connect the handset to a PC using data link software and a FOMA USB cable (optional) and save the data to the PC.File Format* JPEG, GIF, FlashPixels 1024 x 1280 dots or fewerFile Size XXX KbytesFile Extension jpg, gif

205Data Display, Edit, Management/Music Playback XXXXXacy$★$ (Databox) y "My Pictures/Animations"bSelect a folder yccSelect a file yc■Operations on the Image display screen■Operations on the Flash movie playback Screen■Icons Displayed on the image file listFunction Menu on the My Pictures ScreenaMy Pictures screen (P205) yh [Function] y Perform the following operationsNow Playing/HideShow or hide the Playback screen for the melody played in background. →P216Create NewStart the Camera.y "Picture"Pictures SetupSpecify how to display files in the folder. →P206Function Menu on the My Picture ScreenaMy Picture screen (P205) y Select a file yh [Function] y Perform the following operationsNow Playing/HideShow or hide the Playback screen for the melody played in background. →P216ViewDisplay the selected file.PlayPlay a Flash movie.Add To AlbumAdd the selected file to an Album.EditEdit the selected file. →P207Create NewStart the Camera.y "Pictures"Filter byChange the saving destination of the selected file. (Checking the specifications)y "Storage Location"SendButton/Key DescriptionsDisplay the previous/next file*/#Display the full screen (press s to restore the previous screen)JDisplay a slide show of files in the folderoCreate i-mode mail with the file attachedGo to Step 2 in "Creating and Sending i-mode Mail" (P172).Button/Key DescriptionsDisplay the previous/next fileN/MIncrease/decrease the volumeIcon Description$★$ Files saved on the handset$★$ Files saved on the memory cardMy Pictures screenImage file listScreen to be insertedFlash playback screenStill image display screenScreen to be insertedAllPhone MemorymicroSD: Save the file to both the handset and memory card.: Save the file to the handset.: Save the file to the memory card.in Emailto IrDAto Bluetooth: Create i-mode mail with the file attached. Go to Step 2 in "Creating and Sending i-mode Mail" (P172).: Send one file using Infrared communication.: Send via Bluetooth. Go to Step 2 in "Registering and Connecting Bluetooth Device" (P239). Continued on the next page

206Data Display, Edit, Management/Music Playback XXXXXApply AsSet the selected file as Wallpaper or Screen Saver.ManageRename, delete, move or copy the selected file.Select Multiple toDetailsDisplay the file size, resolution and file format, etc. of the selected file.yScroll with dyh [Function] Pictures SetupSet the display method of the selected file. →P206Function Menu on the Image Display ScreenaImage display screen (P205) yh [Function] y Perform the following operationsView Full ScreenDisplay an image to the whole screen.•C: Cancels the full-screen display.Add to AlbumSelect a file and add to an Album.Create NewStart the Camera.y "Picture"SendApply AsSet the displayed file as Wallpaper or Screen Saver.ManageRename, delete, move or copy the displayed file.ZoomPropertiesDisplay the file size, resolution and file format, etc. of the selected file.yScroll with dyh [Function] Video QualitySet the quality of the displayed Flash.y"Good"/"Better"/"Best"ReplayPlay a Flash movie.Setting the Image DisplaySet the display method for an image.WallpaperScreen SaverPhonebook EntryCamera Off Image: Set as Wallpaper.: Set as the Screen Saver.: Set to a Contact. Go to Step 2 in "Saving Contacts to the Phonebook from Received Calls or Dialed Calls" (P95).: Set the file as the alternate image for video calls.RenameDeleteMoveCopy: Change the name of the file.: Delete the selected file.: Move the selected file to the handset or the memory card.: Copy the selected file to the handset or the memory card.Add To AlbumDeleteMoveCopy: Select more than one file and add to an Album. Select a file to delete y Press cyi [Complete] y $★$ [Yes].: Select multiple files and move to the other folders, etc.: Select and move more than one file to another folder. Go to Step 3 in "Selecting and Moving/Copying Multiple Files".: Select and copy more than one file to another folder. Select a file to copy ycy i [Execute] y Select a copying destination folder y Press h [Select].Restrict FileCopy All Text: Restrict the file.: Copy the file information.In Emailto IrDAto Bluetooth: Create i-mode mail with the file attached. Go to Step 2 in "Creating and Sending i-mode Mail" (P172).: Send one file using Infrared communication.: Send via Bluetooth. Go to Step 2 in "Registering and Connecting a Bluetooth Device" (P239).WallpaperScreen SaverPhonebook EntryCamera Off Image: Set as Wallpaper.: Set as the Screen Saver.: Set to a Contact. Go to Step 2 in "Saving Contacts to the Phonebook from Received Calls or Dialed Calls" (P95).: Set the file as the alternate image for video calls.RenameDeleteMoveCopy: Change the name of the file.: Delete the displayed file.: Move the displayed file to the handset or the memory card.: Copy the displayed file to the handset or the memory card.Fit-to-screen50%75%Original Size: Display an image to the whole screen.: Enlarge and display the file by 50%. : Enlarge and display the file by 75%. : Restore the original size of the enlarged image.Restrict FileCopy All Text: Restrict the file.: Copy the file information.DefaultAuto Repeat: OFFSlide Interval: 4 secondsFull-Screen: Left (90 CCW)

207Data Display, Edit, Management/Music Playback XXXXXaImage file list (P205) y Select a file yh [Function] y "Pictures Setup"bSelect from the following items yh [Change]Auto Repeat(Checking the specifications)y "On"/"Off"Slide IntervalSet the interval for a slide show between 1 - 999 seconds.y Enter a number of seconds•h [Function]: Edit the entered characters (number of seconds). Full ScreenSet the angle of the image to be displayed to full screen.y "Left (90 CCW)"/"Right (90 CW)" Edit Still ImagesEditing Still ImagesYou can edit still images. Edited images are saved in "(Checking the specifications)".• Only JPEG files can be edited. However, you may not be able to edit some files.aImage file list (P205)/Image file list in an Album (P211) y Select a file yh [Function] y "Edit" y "Edit Picture"The Edit Brightness screen opens.bUse s to select the value for Brightness yi [Apply]• The Brightness value can be selected from -3 - 0 - +3.cUse j to select from the following editing itemsContrastSet contrast of the image.yUse s to select the value yi [Apply]• Select the contrast from -3 - 0 - +3.Blur/SharpenSet the sharpness of the image.yUse s to select the value yi [Apply]• Select Blur/Sharp from -3 - 0 - +3.MirrorSet the direction for mirroring the image. Set an option and press i [Apply].RotationSet an angle to rotate an image.y "0 Degrees"/"90 Degrees"/"180 Degrees"/"270 Degrees" yi [Apply]BordersAdd a frame to an image.y "border1_filename"/"border2_filename"/"None Selected" yi [Apply]Image StyleSet special effects for an image. Set an option and press i [Apply].di [Save] (Checking the specifications)Function Menu on the Edit Image ScreenaImage edit screen (P207) yh [Function] y Perform the following operationsExitEnd editing. (Checking the specifications)Save AsSave the edited image as a new file.y Set the following items yh [Complete]SaveSave an edited image.UndoRestore the original image.Pictures Setup screenEdit image screenScreen to be insertedNone SelectedHorizontalVertical: Mirroring is not set. (Checking the specifications): Invert the image horizontally.: Invert the image vertically.None SelectedBlack&WhiteNegativeSepiaSolarizeReddishBluishGreenish: No image effect is set. (Checking the specifications): Change the image into black and white.: Change the image into negative.: Change the image into sepia tone.: Invert the image horizontally.: Emphasize red.: Emphasize blue.: Emphasize green.File NameStorage Location: Enter a file name. : Select a location from "Phone"/"Memory Card".Continued on the next page

208Data Display, Edit, Management/Music Playback XXXXX* You need to obtain a microSD memory card separately to use the functions related to the microSD memory card. →P221CropTrim away a fixed part of an image to a determined size.•j: Moves up or down. (Checking the specifications)•h [Function]: Select a cropping size or edit text to be added to an image. (Checking the specifications)y "3.5x5"/"4x6"/"5x7"/"8x10"/"8 1/4x11 3/4" (A4)"/"Manual" yi [Apply]ResizeChange the size of the image.•i [Cancel]: Cancel resizing the image.y Select a size ycyh [Yes] (Checking the specifications)Add GraphicAdd a graphic to an image.y Select a graphic yh [Select]Add TextAdd text to an image.ySet the following items yh [Complete]• "Borders", "Crop", "Add Graphic" and "Add Text" cannot be set for an image of 120 x 160 dots or smaller.• You cannot "Resize" an image to a larger size than the original image.• "Add Text" cannot be set for an image of 640 x 480 dots or larger.Video/i-motion PlayerPlaying Videos/i-motion MoviesYou can play video clips you have captured, or i-motion movies obtained from sites or i-mode mail. ■Available file formats*: Even if a file is in a compatible file format, it may not play, depending on the file.acy $★$ (Databox) y "i-motion"bSelect a folder yccSelect a file yc■When the ticker has highlighted textSelect the highlighted area to use the Web To or Mail To function. Select the highlighted area y Press cyh [Yes].■Operations on the i-motion playback screen■Operations on the i-motion with ticker screenFunction Menu on the i-motion Screenai-motion screen (P208) yh [Function] y Perform the following operationsNow Playing/HideShow or hide the Playback screen for the melody played in background. →P216TextFont SizeText Color: Enter text to add to the image.: Select a font size from "Large"/"Standard"/"Small".: Select a text color from 9 colors.Borders/Crop/Add Graphic/Add TextResizeAdd TextFile Format* MP4 (Mobile MP4)Encoding Method MP4 fileGraphics: (Checking the specifications)Audio: (Checking the specifications)Cropping screenScreen to be insertedAdding text screenScreen to be insertedFile Extension mp4 and 3gpButton/Key DescriptioncPause/PlaysFast Forward/RewindButton/Key DescriptioncPause/Playc(while a ticker is selected)Perform Phone To, AV Phone To, Web To or Mail To functioni-motion screeni-motion file listi-motion with ticker screeni-motion playback screenScreen to be insertedScreen to be inserted

209Data Display, Edit, Management/Music Playback XXXXXCreate NewStart the Video Camera. y "i-motion"i-motion SetupSet the playback method of the selected file. →P210Function Menu on the i-motion File Listai-motion file list (P208) y Select a file yh [Function] y Perform the following operationsNow Playing/HideShow or hide the Playback screen for the melody played in background. →P216PlayPlay the selected file.Add to AlbumAdd the selected file to an Album.EditEdit the selected file. →P210Create NewStart the Video Camera.y "i-motion"Filter byChange the saving destination of the selected file. (Checking the specifications)y "Storage Location" y Select from the following itemsSendApply AsSet the selected file as a Screen Saver or ringtone.ManageRename, delete, move or copy the selected file.Select Multiple toDetailsDisplay the file name, size and author, etc. of the selected file.yScroll with dyh [Function]i-motion SetupSet the playback method of the selected file. →P210Function Menu on the i-motion Playback Screenai-motion playback screen (P208) yh [Function] y Perform the following operationsEditEdit the i-motion that is in playback. →P210Add to AlbumSelect a file and add to an Album.Create NewStart the Video Camera.y "Video"SendApply AsSet the file in playback as a Screen Saver or ringtone.AllPhone MemorymicroSD: Save the file to both the handset and memory card.: Save the file to the handset.: Save the file to the memory card.In Emailto IrDAto Bluetooth: Create i-mode mail with the file attached. Go to Step 2 in "Creating and Sending i-mode Mail" (P172).: Send one file using Infrared communication.: Send via Bluetooth. Go to Step 2 in "Registering and Connecting a Bluetooth Device" (P239).Screen SaverIncoming Call AlertAlarm: Set as the Screen Saver.: Set as a ringtone.: Set as an alarm tone.RenameDeleteMoveCopy: Change the name of the file. : Delete the selected file.: Move the selected file to the handset or the memory card.: Copy the selected file to the handset or the memory card.Add to AlbumDeleteMoveCopy: Select more than one file and add to an Album. : Select and delete more than one file. Select a file to delete y Press cyi [Complete] y $★$ [Yes].: Select and move more than one file to another folder. Select a file to move ycyi [Complete] y Select a destination folder y Press h [Select].: Select and copy more than one file to another folder. Select a file to copy ycyi [Execute] y Select a copying destination folder y Press h [Select].Restrict FileCopy All Text: Restrict the file.: Copy the file information.In Emailto IrDAto Bluetooth: Create i-mode mail with the file attached. Go to Step 2 in "Creating and Sending i-mode Mail" (P172).: Send one file using Infrared communication.: Send via Bluetooth. Go to Step 2 in "Registering and Connecting a Bluetooth Device" (P239).Screen SaverIncoming Call AlertAlarmVideo Call AlertVideo Call MessageEmail Message AlertR/F Message AlertCalendar Alarm: Set as the Screen Saver.: Set as a ringtone.: Set as an alarm tone.: Set as the video call ringtone.: (Checking the specifications): Set as an Email ringtone.: Set as a ringtone for Messages R/F.: Set as an alarm tone for a Datebook event.Continued on the next page

210Data Display, Edit, Management/Music Playback XXXXXManageDelete, move or copy the file in playback.DetailsDisplay the file name, size and author, etc. of the file in playback.y Scroll with dyh [Function]Movies SetupSet the playback method of the file in playback. →P210Setting Videos/i-motion Movies Playback MethodSet the playback method for i-motion movies.ai-motion file list (P208) / i-motion playback screen (P208) yh [Function] y "i-motion Setup"/"Movies Setup"bSelect from the following items yh [Change]Auto Repeat(Checking the specifications)y "On"/"Off"Full ScreenSet the angle of the image to be displayed to full screen.y "Left (90 CCW)"/"Right (90 CW)"Edit Videos/i-motion MoviesEditing Videos/i-motion MoviesYou can edit videos/i-motion movies. Edited videos/i-motion movies are saved in "(Checking the specifications)".• Some files may not be edited.Opening the Videos/i-motion Movies Edit Screenai-motion file list (P208) / i-motion playback screen (P208) yh [Function] y "Edit"Cropping a VideoYou can crop a part of a video image while playing back a video/i-motion movie.aVideo/i-motion movie edit screen (P210) y "Extract clip"•c: Play a video/i-motion moviebSpecify a starting point for cropping yh [Select]cSpecify a cropping actionyh [Select]dSpecify an ending point yh [Yes]Cropping a Part of a Video as a Still ImageYou can crop a still image from a video/i-motion movie.aVideo/i-motion movie edit screen (P210) y "Extract still"bSelect an image to crop ycch[Save]DeleteMoveCopy: Delete the file in playback.: Move the file in playback to the handset or the memory card.: Copy the file in playback to the handset or the memory card.Restrict FileCopy All Text: Restrict the file.: Copy the file information.Default Auto Repeat: OffFit-to-screen: Left (90 CCW)i-motion setup screenVideo/i-motion movie edit screenScreen to be insertedCropping screenScreen to be insertedScreen to be inserted

211Data Display, Edit, Management/Music Playback XXXXXCompressing Video FilesaVideo/i-motion movie edit screen (P210) y "Compress"b"i-mode Mail (Small)"/"i-mode Mail (Large)"Deleting Sounds or Graphics from VideosaVideo/i-motion movie edit screen (P210) y "Delete track"b"Video track"/"Audio track"/"Ticker"Recording Sounds to Videos (Checking the specifications)aVideo/i-motion movie edit screen (P210) y "Record audio"b"Record new track"/"Use existing audio file"■To record new audioThe original audio of the video/i-motion movie will be deleted. Press h [Yes] to select "Record new track".ch [Save]Picture Albums/i-motion Movie AlbumUsing AlbumsYou can save captured still images/videos or files in My Pictures/i-motion in an Album and manage them.aMost ViewedThe Album with files that are most viewed (20 files).bUser-defined AlbumsThe created Album name is displayed.cCreate New AlbumCreate a new Album.Function Menu on the Album ListaPicture Album list (P211)/i-motion Album list (P211) yh [Function] y Perform the following operationsNow Playing/HideShow or hide the Playback screen for the melody played in background. →P216ViewDisplay the images in the selected Album.PlayPlay the i-motion movies in the selected Album.Create NewStart the Camera/Video Camera and create a new Album.ManageDelete, move or copy the file in playback.Pictures SetupSpecify how to display files in an Album. →P206i-motion SetupSpecify how to play files in an Album. →P208Saving Images to an AlbumaPicture Album list (P211)/i-motion Album list (P211) y "[Create New Album]"bSelect a folder yh [Open]cSelect a file to save in an Albumi-motion Album listPicture Album listacbacbPicturei-motion FileAlbum: Start Camera.: Start the Video Camera.: Creates a new Album. →P211RenameRemove: Change the name of the Album.: Deletes the selected Album.Folder selection screen(Example: Picture Album)Example: Add picture screenScreen to be insertedContinued on the next page

212Data Display, Edit, Management/Music Playback XXXXX•Select h [Function] y "Select All" to select all files in the folder at once.di [Complete] y Enter an album nameDisplaying Images in an AlbumaPicture Album list (P211)/i-motion Album list (P211) y Select an AlbumbSelect a file yc■Icons displayed on the file list in an albumFunction Menu on the File List of an AlbumaFile list in an i-motion Album (P211)/File list in an i-motion Album (P211) yh [Function] y Perform the following operationsNow Playing/HideShow or hide the Playback screen for the melody played in background. →P216ViewDisplay the selected image.ReplayPlays the selected i-motion movie.Edit PictureEdit the selected image. →P207EditEdit the selected i-motion movie. →P210Create NewStart the Camera/Video Camera.y "Pictures"/"Video Camera"Sort byChange the saving destination of the selected file. (Checking the specifications)SendApply AsSet the selected file as Wallpaper or Screen Saver.ManageDelete or sort the selected file.Select Multiple toDetailsDisplay the file size and file format, etc. of the selected file.y Scroll with dyh [Function] Pictures SetupSet the display method of the selected file. →P206i-motion SetupSet the playback method of the selected file. →P210• Items displayed on the function menu vary depending on the selected files and settings on the handset.Icon Description$★$ Files saved on the handset$★$ Files saved on the memory card$★$ Select a file to save in an Album.File list in an i-motion AlbumFile list in aPicture AlbumScreen to be insertedAllPhone MemoryMemory Card: Save the file to both the handset and memory card.: Save the file to the handset.: Save the file to the memory card.In Emailto IrDAto Bluetooth: Create i-mode mail with the file attached. Go to Step 2 in "Creating and Sending i-mode Mail" (P172).: Send one file using Infrared communication.: Send via Bluetooth. Go to Step 2 in "Registering and Connecting a Bluetooth Device" (P239).WallpaperScreen SaverIncoming Call AlertPhonebook EntryCamera Off ImageAlarms: Set as Wallpaper.: Set as the Screen Saver.: Set as a ringtone.: Set to a Contact. Go to Step 2 in "Saving Contacts to the Phonebook from Received Calls or Dialed Calls" (P94).: Set the file as the alternate image for video calls.: Set as an alarm tone.RemoveReorder: Delete files.: Rearrange files. Select a file yh [Move] y Select a destination y Press h [Insert].Add More PicturesAdd i-motionRemove: Select a file to save in an Album.: Select a file to save in an Album.: Select and delete more than one file. Select a file to delete y Press cyi [Complete] y $★$ [Yes].Restrict FileCopy All Text: Restrict the file.: Copy the file information.

214Data Display, Edit, Management/Music Playback XXXXX* You need to obtain a microSD memory card separately to use the functions related to the microSD memory card. →P221Enter V-Phone No.Make a video call using the Chara-den in playback as the alternate image.Set Chara-denSet the selected Chara-den as the alternate image for video calls.Detail InfoDisplay the file size and file format, etc. of the Chara-den in playback.•h [Function]: Copy the content of the detailed information screen. Select "Copy All Text".DeleteDelete the Chara-den in playback.Change SizeChange the display size of the Chara-den in playback. (Checking the specifications)•j: Enlarge the image/Restore the original sizeChara-den Functiony "Change Action"Switches the character action mode.y"Action List"Lists all actions assigned to operation keys.• Select an action y Press h [Select] to make the character show the selected action.Melody PlayerPlaying MelodiesYou can play pre-installed melodies or melodies downloaded from sites.■Available File Formats*: Even a file in a compatible file format may not play depending on the file.acy $★$ (Databox) y "Melody"bSelect a folder yccSelect a file yc■Operations on the Melody playback screen■Playing a melody with the FOMA handset folded(Checking the specifications)If you fold the FOMA handset during melody playback, the artist name and song title are displayed on the Sub-display.■Sub-display■Key operation on the Melody playback screen■Key operation on the Song title list• The Song title list returns to the Melody playback screen after five seconds.Enter NumberPhonebookReceived CallsDialed Calls: Make a call by entering a phone number directly. →P80: Make a call by searching the phonebook. →P97: Make a call by searching through Received Calls. →P67: Make a call by searching through Dialed Calls. →P56Partial Action ModeFull Action Mode: The character uses a part of the body to express actions.: The character uses the whole body to express actions.File Format* SMF, MFiFile Extension mid, mld, midiMelody screenButton/Key DescriptioncPause/PlaysPlay the previous/next fileN/MAdjust the volumeKey DescriptionJOpen the Song title listJ(press for X second or longer) Stop melody playbackN/MAdjust the volumeKey DescriptionJPause/PlayJ(press for X second or longer) Stop melody playbackN/MAdjust the volumeN/MDisplay the previous/next song title in the listMelody file listMelody playback screenScreen to be insertedSong title listMelody playback screenJScreen to be insertedScreen to be inserted

215Data Display, Edit, Management/Music Playback XXXXXFunction Menu on the Melody ScreenaMelody screen (P214) yh [Function] y Perform the following operationsNow Playing/HideShow or hide the Playback screen for the melody played in background. →P216Melody SetupSet the playback method and sound quality of the melodies in the selected folder. →P216Function Menu on the Melody File ListaMelody file list (P214) y Select a file yh [Function] y Perform the following operationsNow Playing/HideShow or hide the Playback screen for the melody played in background. →P216PlayPlay the selected melody.Add To PlaylistAdd the selected file to a Playlist.Filter byChange the saving destination of the selected melody. (Checking the specifications)SendApply AsSet the selected melody as a ring tone or to a Contact.ManageRename, delete, move or copy the selected melody.Select Multiple toDetailsDisplay the name and size, etc. of the selected melody.y Scroll with dyh [Function] Melody SetupSet the playback method and sound quality of the selected melody. →P216Function Menu on the Melody Playback ScreenaMelody playback screen (P214) yh [Function] y Perform the following operationsAdd To PlaylistAdd the melody in playback to a Playlist.SendApply AsSet the melody in playback as the alternate image or to a Contact.AllPhone MemorymicroSD: Save the file to both the handset and memory card.: Save the file to the handset.: Save the file to the memory card.In Emailto IrDAto Bluetooth: Create i-mode mail with the file attached. Go to Step 3 in "Creating and Sending i-mode Mail" (P172).: Send 1 file using Infrared communication.: Send via Bluetooth. Go to Step 2 in "Registering and Connecting a Bluetooth Device" (P239).Incoming Call AlertPhonebook EntryAlarm: Set as a ringtone.: Set to a Contact. Go to Step 2 in "Saving Contacts to the Phonebook from Received Calls or Dialed Calls" (P94).: Set as an alarm tone. Edit titleRemoveMoveCopy: Change the title of the selected melody.: Delete the selected melody.: Move the selected melody to the handset or the memory card.: Copy the selected melody to the handset or the memory card.Add to PlaylistDeleteMoveCopy: Select more than 1 melody and add to a Playlist.: Select and delete more than 1 melody. Select melodies to delete y Press cyi [Complete] y $★$ [Yes].: Select and move more than 1 melody to another folder. Select melodies to move y cyi [Complete] y Select a destination folder y Press h [Select].: Select and copy more than 1 melody to another folder. Select melodies to copy ycyi [Execute] y Select a copying destination folder y Press h [Select].Restrict FileCopy All Text: Apply the restriction to files.: Copy the file information.In Emailto IrDAto Bluetooth: Create i-mode mail with the file attached. Go to Step 3 in "Creating and Sending i-mode Mail" (P172).: Send 1 file using Infrared communication.: Send via Bluetooth. Go to Step 2 in "Registering and Connecting a Bluetooth Device" (P239).Incoming Call AlertPhonebook Entry: Set as a ringtone. : Set to a Contact. Go to Step 2 in "Saving Contacts to the Phonebook from Received Calls or Dialed Calls" (P94).Continued on the next page

216Data Display, Edit, Management/Music Playback XXXXX* You need to obtain a microSD memory card separately to use the functions related to the microSD memory card. →P221ManageReorder, delete, move or copy the melody in playback.File DetailsDisplay the name and size, etc. of the melody in playback.y Scroll with dyh [Function] Melody SetupSet the playback method and sound quality of the melody in playback. →P216HideReturn to the stand-by display. (Checking the specifications)Using Another Function while Playing a MelodyYou can call up and use another option while playing a melody.■Functions available during the background playback (Checking the specifications)aMelody playback screen (P214) yh [Function] y "Hide"Close the Melody playback screen and display the stand-by display. The melody in playback is played in background.■To return to the melody playback screenYou can display the Melody playback screen from the function menu of each screen.•h [Function] y Select "Now Playing"Setting the Playback Method and Sound Quality of MelodiesSet the playback method and sound quality of the melody.aMelody screen (P214)/Melody file list (P214)/Melody playback screen (P214) yh [Function] y "Melody Setup"bSelect from the following items yh [Change]Auto Repeat(Checking the specifications)y "On"/"Off" yh [Select]Equalizery "On"/"Off" yh [Select]Spatial Audioy "On"/"Off" yh [Select]Bass Boosty "On"/"Off" yh [Select]PlaylistCreating a PlaylistYou can create a Playlist for your favorite melodies.aMelody screen (P214) y "Playlists"aMost PlayedFiles played many times (●●files) are automatically saved in the Playlist.ReorderDeleteMoveCopyRemove: Rearrange melodies. Select a melody yh [Move] y Select a destination y Press h [Insert] yi [Complete].: Delete the melody in playback.: Move the melody in playback to the handset or the memory card.: Copy the melody in playback to the handset or the memory card.: (Checking the specifications)Restrict FileCopy All Text: Apply the restriction to files.: Copy the file information.FunctionDefaultAuto Repeat: Off Equalizer: OnSpatial Audio: (Checking the specifications)Bass Boost: (Checking the specifications)Melody Setup screenPlaylist screenScreen to be inserted

217Data Display, Edit, Management/Music Playback XXXXXbUser-defined PlaylistsThe created Playlist name is displayed.cCreate New PlaylistCreate a new Playlist.b"[Create New Playlist]" yccSelect a folder yh [Open]dSelect a melody to save in the Playlist•Select h [Function] y "Select All" to select all melodies in the folder at once.ei [Complete] y Enter a Playlist nameFunction Menu on the Playlist ScreenaPlaylist (P216) yh [Function] y Perform the following operationsNow Playing/HideShow or hide the Playback screen for the melody played in background. →P216PlayPlay a melody.Create NewCreates a new Playlist.ManageDelete or rename Playlists.Melody SetupSet the playback method and sound quality of the melody in playback. →P216Editing PlaylistsYou can change the content of the created Playlists by deleting or adding melodies.Adding MelodiesaPlaylist screen (P216) y Select a Playlist ycb"Add More Melodies" yccSelect a melody yc•Select h [Function] y "Select All" to select all melodies in the folder at once.di [Complete]Deleting MelodiesaPlaylist list (P216) y Select a Playlist ycbSelect a melody yh [Function] y "Manage" y "Delete"■To select and delete more than one melodyPress h [Function] and go to Step 3 in "Selecting and Deleting Multiple Files".Function Menu on the Playlist ListaPlaylist list (P217) y Select a Playlist ycy Perform the following operationsNow Playing/HideShow or hide the Playback screen for the melody played in background. →P216PlayPlay a melody.Filter byChange the saving destination of the selected melody. (Checking the specifications)y "Storage Location"RenameDelete: Change the title of the selected Playlist.: Deletes the selected Playlist.Add melody screenAllPhone MemorymicroSD: Save the file to both the handset and memory card.: Save the file to the handset.: Save the file to the memory card.Playlist listContinued on the next page

218Data Display, Edit, Management/Music Playback XXXXX* You need to obtain a microSD memory card separately to use the functions related to the microSD memory card. →P221SendApply AsSet the selected melody as the ringtone or alarm tone.ManageReorder or delete melodies in a Playlist.Select Multiple toDetailsDisplay the file name, size and author, etc. of the selected file.y Scroll with dyh [Function] Melody SetupSet the playback method and sound quality of the selected melody. →P216Voice NotesUsing Voice NotesYou can save and manage Voice Notes on the handset.Recording Voice Notesacy $★$ (Databox) y "Voice Notes"bh [Function] y "Create New" y "Voice Note"ccRecording starts. The recording time is 30 seconds.•c: Pause/resume the recording.•h [Stop]: Cancel the recording.dAfter recording yi [Store]• When "Auto Save" is set to "On", the recording is saved automatically. →P219■Recording Voice Notes with the FOMA handset closedHold down H to keep recording a Voice Note. Release H to end recording.• The recorded Voice Memo is saved with the recorded time and date as a file name as "XX-XX-XX.amr". (Checking the specifications)Function Menu on the Voice Note ScreenaVoice Note screen (P218) yh [Select] y Perform the following operationsNow Playing/HideShow or hide the Playback screen for the melody played in background. →P216Create NewStart recording. →P216Function Menu on the Voice Note Ready ScreenaVoice Note ready screen (P218) yh [Function] y Perform the following operationsIn Emailto IrDAto Bluetooth: Create i-mode mail with the file attached. Go to Step 3 in "Creating and Sending i-mode Mail" (P172).: Send 1 file using Infrared communication.: Send via Bluetooth. Go to Step 2 in "Registering and Connecting a Bluetooth Device" (P239).Incoming Call AlertPhonebook EntryAlarm: Set as a ringtone.: Set to a Contact. Go to Step 2 in "Saving Contacts to the Phonebook from Received Calls or Dialed Calls" (P94).: Set as an alarm tone.ReorderRemove: Reorder the selected melody. Select a file yh [Move] y Select a destination y Press h [Insert].: Delete the selected melody.Add More MelodiesRemove: Select more than 1 melody and add to a Playlist.: Select and delete more than 1 melody. Select melodies to delete y Press hyi [Complete] y $★$ [Yes].File RestrictionsCopy All Text: Apply the restriction to files.: Copy the file information.Voice Notes screenVoice Note Ready screenScreen to be insertedVoice Note recording completion screenScreen to be inserted

219Data Display, Edit, Management/Music Playback XXXXXGo To Voice NotesOpen the Voice Note list.Switch Storage DeviceSet the saving destination for Voice Notes.y "microSD"/"Phone Memory"Voice Recorder SetupSet the recording quality or time, etc.Free SpaceDisplay the storage space status of the Voice Notes folder.Function Menu on the Voice Note Recording Completion ScreenaVoice Note recording completion screen (P218) yh [Function] y Perform the following operationsDiscardDelete recorded Voice Notes.PreviewPlay recorded Voice Notes.Re-RecordRecord again.Apply as RingtoneSet the recorded Voice Note for use as a Ring Tone.Playing Recorded Voice NotesThe Voice Note screen has the following components:aVoice Notes (All)All recorded Voice Notes are listed.bMy NotesRecorded Voice Notes are displayed per category.aVoice Note screen (P219) y Select "Voice Notes (All)"/"My Notes"■When selecting Voice Notes (All)Select the voice note to play and press c.■When selecting My DataSelect "Category" yPress c y Select the voice note yPress c.Function Menu on the Voice Notes (All) ListaVoice Notes (All) list (P219) y Select a file yh [Function] y Perform the following operationsNow Playing/HideShow or hide the Playback screen for the melody played in background. →P216PlayPlay the selected Voice Note.Add to CategoryAdd the selected Voice Note to a category.Create NewRecord a Voice Note.Filter byChange the saving destination of the selected file. (Checking the specifications)y "Storage Location"SendRecord QualityRecord LengthAuto Save: Sets the recording quality. Select from "Good"/"Better"/"Best".: Set the recording time. Select from "MMS"/"Maximum" (30 seconds).: Set whether to save the recorded Voice Notes automatically. Select from "On"/"Off". Voice Notes screenabAllPhone MemorymicroSD: Save the file to both the handset and memory card.: Save the file to the handset.: Save the file to the memory card.In Emailto IrDAto Bluetooth: Create i-mode mail with the Voice Note attached. Go to Step 3 in "Creating and Sending i-mode Mail" (P172).: Send one file using Infrared communication.: Send via Bluetooth. Go to Step 2 in "Registering and Connecting a Bluetooth Device" (P239).Voice Notes (All) list screenCategory list screen

220Data Display, Edit, Management/Music Playback XXXXX* You need to obtain a microSD memory card separately to use the functions related to the microSD memory card. →P221Apply AsSet the selected Voice Note as the alternate image or to a Contact.ManageRename, delete, move or copy the selected Voice Note.Select Multiple toDetailsDisplay the name and size, etc. of the selected Voice Note.y Scroll with dyh [Function] Function Menu on the Category ListaCategory list (P219) y Select a file yh [Function] y Perform the following operationsNow Playing/HideShow or hide the Playback screen for the melody played in background. →P216PlayPlay the selected Voice Note.Create NewRecord a Voice Note. →P218Filter byChange the saving destination of the selected file. (Checking the specifications)y "Storage Location"SendApply AsSet the selected Voice Note as the alternate image or to a Contact.ManageDelete the selected Voice Note.y "Delete"Select Multiple toDetailsDisplay the name and size, etc. of the selected Voice Note.y Scroll with dyh [Function] Saving Voice Notes to My DataYou can manage recorded Voice Notes by saving them per category.aVoice Note screen (P219) y "My Notes"bSelect "Create New Category" y a folderIncoming Call AlertPhonebook EntryAlarm: Set as a ringtone.: Set to a Contact. Go to Step 2 in "Saving Contacts to the Phonebook from Received Calls or Dialed Calls" (P94).: Set as an alarm tone.RenameDeleteMoveCopy: Change the title of the selected Voice Note.: Delete the selected Voice Note.: Move the selected Voice Note to the handset or the memory card.: Copy the selected Voice Note to the handset or the memory card.Add to CategoryDeleteMoveCopy: Select and add more than one Voice Note to a category.: Select and delete more than one Voice Note. Select a Voice Note to delete y Press cyi [Complete] y $★$ [Yes].: Select and move more than one Voice Note to another folder. Select a Voice Memo to move ycyi [Complete] y Select a destination folder y Press h [Select].: Select and copy more than one Voice Note to another folder. Select a Voice Memo to copy ycyi [Complete] y Select a destination folder y Press h [Select].Restrict FileCopy All Text: Apply the restriction to files.: Copy the file information.AllPhone MemorymicroSD: Save the file to both the handset and memory card.: Save the file to the handset.: Save the file to the memory card.In Emailto IrDAto Bluetooth: Create i-mode mail with the Voice Note attached. Go to Step 3 in "Creating and Sending i-mode Mail" (P172).: Send one file using Infrared communication.: Send via Bluetooth. Go to Step 2 in "Registering and Connecting a Bluetooth Device" (P239).Ring TonePhonebook EntryAlarm: Set as a ringtone.: Set to a Contact. Go to Step 2 in "Saving Contacts to the Phonebook from Received Calls or Dialed Calls" (P94).: Set as an alarm tone.Add More Voice NotesDelete: Select and add more than one Voice Note to a category.: Select and delete more than one Voice Note. Select a Voice Note to delete y Press cyi[Complete] y $★$ [Yes].Restrict FileCopy All Text: Apply the restriction to files.: Copy the file information.My Notes screen

221Data Display, Edit, Management/Music Playback XXXXXcSelect a Voice Note yc•Select h [Function] y "Select All" to select all Voice Notes in the folder at once.di [Complete] y Enter a Category nameFunction Menu on the My Data ScreenaMy Data screen (P220) yh [Function] y Perform the following operationsNow Playing/HideShow or hide the Playback screen for the melody played in background. →P216Create NewManageRename or delete the selected Category.microSD Memory CardsYou can insert a microSD memory card into the handset and use it as external storage. A microSD memory card is a small size and lightweight, removable external storage media with a large capacity.• You can purchase microSD memory cards and microSD memory card adapters from electric appliance mass sales stores, etc. The M702iG handset supports microSD memory cards up to ●●● Mbytes. (As of ●●, 2006)Cautions on Using MicroSD Memory Cards• microSD memory cards formatted by another device such as a PC may not be usable on the handset. Use memory cards formatted by the M702iG handset. →P222• Memory cards may lose data or deform due to an accident or failure of the handset. It is recommended that you make a copy of important data and keep it in a separate place. DoCoMo is not responsible for loss or alteration of data.• Do not turn the handset power off while data is being read or written.• Do not apply labels or stickers on memory cards. Even the thickness of labels may cause loose contacts and data corruption.• Do not touch the contacts with your hand or metal object.• Do not apply strong force, do not bend or drop, and do not let the card become wet.• Do not use or store the card in the following places:- In extremely high temperatures such as inside a very hot car or under scorching heat- In direct sunlight- In an environment with high humidity or corrosive substances- In a place where it can be affected by static electricity or electrical noiseInserting/Removing a Memory CardRemove the battery rear cover and the battery pack first. →P44InsertingVoice NoteCategory: Start recording. →P218: Create a new Category. →P220Edit titleDelete: Edit the title name. Enter a title y Press c.: Delete a Category. Illustration to be insertedIllustration to be inserted

222Data Display, Edit, Management/Music Playback XXXXX* You need to obtain a microSD memory card separately to use the functions related to the microSD memory card. →P221RemovingStructure of Folders on the Memory Card(Checking the specifications)Using a Memory Card(Checking the specifications)Formatting a Memory Card(Checking the specifications)Format (initialize) a memory card so that it can be used for the FOMA handset.aDatabox screen (P204) yh [Function] y "Format Memory Card"Moving/Copying Files between a Memory Card and the Handset(Checking the specifications)Reading and Writing to a Memory CardConnect the FOMA handset with a memory card inserted to a PC and read data from/write data to the memory card.To use a memory card, you need an optional memory card.acy $★$ (Connection) y $★$ (USB Mode Setting) y "Default Connection" yh [Change] y "microSD mode"bConnect the handset and a PC using a USB cable (optional)Setting the USB ModeSet the USB mode when the FOMA handset and a PC are connected using a USB cable (optional). The USB mode is set to either "Data Connection" or "microSD mode".■Data/Fax ConnectionUse the external connector terminal to transfer data via the cable connection.Illustration to be insertedUSB Mode Setup screenIllustration to be inserted

223Data Display, Edit, Management/Music Playback XXXXX■Memory Card ModeUse the external connector terminal as a means of reading from/writing to the memory card.aUSB Mode Setup screen (P222) y "Default Connection" yh [Change]b"microSD mode"/"Data Connection"Infrared CommunicationInfrared CommunicationYou can exchange Contacts, Datebook events or Bookmarks with a device equipped with infrared communication capabilities.Available Data for Data Transfer (Checking the specifications)Infrared CommunicationTo perform infrared communication• When performing infrared communication, open the FOMA handset 90 degrees as shown below.• Use the devices within 20 cm. However, if you place devices on a table, use the devices within 14 cm.• Do not move the FOMA handset until data exchange completes.• If you hold the FOMA handset in your hand, secure the terminal so that it is not shaky.Cautions on Data Transfer• Data may not be transferred depending on the other party's FOMA handset conditions. Depending on the other party's model, the filter setting of received mail or Bookmarks may not be reflected or the content of Deco-mail may not be saved correctly.• Communication may take a while depending on the amount of data to be transferred. Also, it is possible that data may not be received correctly.Ir data/IrDA linkExchanging Data One Piece at a TimeSending Data One Piece at a TimeaData list y h [Function] y "Send" y "to IrDA"/"Infrared"■NoticeVerify that the handset is correctly connected to a PC. If it is not connected correctly, data may not only fail to be exchanged but also may be lost.One AllContact Up to ●●Still Image File Up to ●●ToDo Up to ●●Datebook Event Up to ●●Memo (Checking the specifications)Up to ●●Bookmark Up to ●●Illustration to be inserted■NoticeStored content may be lost due to the handset failure, repair or mishandling. DoCoMo is not responsible for lost data. It is recommended that you keep saved content from the FOMA handset on a microSD memory card. You can connect the handset to a PC using data link software and a FOMA USB cable (optional) and save the data to the PC.Within ±15° from the centerInfrared portWithin20cm90°

224Data Display, Edit, Management/Music Playback XXXXXReceiving Data One Piece at a Timeacy$★$ (Connection) y $★$ (Infrared Link) yh [Yes]Display preview of received data.bSave data■When a Contact is receivedPress h [Store].■When a Calendar event is receivedPress h [Function] yh [Store].■When an image is receivedPress h [Function] yh [Store Only].Function menu on the received image preview screenaReceived image preview screen (P224) yh [Function] y Perform the following operationsSend in MessageCreate i-mode mail with the image attached. →P172Store OnlySave the image.Apply as WallpaperSet as Wallpaper.Apply as the Screen SaverSet as the Screen Saver.Apply as "Camera Off" ImageSet the file as the alternate image for video calls.Print and Store(Checking the specifications)Send All/Receive AllExchanging All DataYou can transfer all data at once with a PC or another FOMA handset.• To exchange all data, a password is used to identify the sender and receiver correctly. The password is any 6-digit number and should be entered both in the sending and receiving devices before sending/receiving data.• Receiving all data overwrites the data on the FOMA handset and deletes all saved data including protected Email. Check whether important data has been saved elsewhere before sending or receiving all data.Sending All DataaFrom a screen showing data to be sent yh [Function] y "Send All"bEnter the security code y "Infrared"y Enter the authentication passwordReceiving All Dataacy$★$ (Connection) y $★$ (Infrared Link)bEnter the security code y Enter the authentication password yh [Yes]ch [Yes]Received image preview screenScreen to be insertedOverwrite data confirmation screenScreen to be inserted

Navigation menu