Motorola Mobility T5ZN1 Portable Cellular Transceiver User Manual 8700 ENG MANUAL 2

Motorola Mobility LLC Portable Cellular Transceiver 8700 ENG MANUAL 2

Motorola Exhibit 8 Users Manual

APPLICANT: MOTOROLA FCC ID: IHDT5ZN1EXHIBIT 8A preliminary draft copy of the user manual follows.
Prohibition of illegal modification ofESNEach handset manufactured by Motorola has its own ESN(Electronics SerialNumber). If this ESN is removed or changed, or an attempt is made toreproduce and enter another ESN, the software built in the handset starts tooperate to abort the attempt. In addition, such an illegal attempt may damagethe software of the handset, with the result that the terminal equipment cannotbe used any longer.Thus, customers are required to use care not to incur any damage due to suchan illegal act. Especially, once such an illegal act is identified, our free and paidservices is rejected and legal steps may be taken pursuant to the related civillaws(Article 4 of Radio Wave Act and Article 347 of the Criminal Law Act).This product should not be added with any separate equipment that may causean alteration to its original performance as described on type registration.?Any content of this manual and any feature of the handset are subject to changeaccording to situation.
ComplimentsThanks in deed for and congratulations to purchasing the cellular phone of Motorolawhich enjoys the best radio communication technology in the world.All of the Motorola cellular communication equipment are designed andmanufactured in compliance with the in-house strict standard and internationalstandards. Especially, they are subjected to stringent tests on temperature, humidity,impact, dust, vibration, and drop before being released.We assure you that MC-8700 handset manufactured through these processes givesyou high quality satisfaction.Thank you again for selecting our products in the hope that you would succeed inyour business with your MC-8700
ContentInformation about Components and Battery Confirmation of Components Information about Battery Battery Use Time Information about Charge Configuration of MC-8700Basic Use Turning Power On/Off Turning Handset On/Off Receiving a Call Viewing Feature MenuHow to Use Major FeaturesTelephone Directory Searching by Name Searching by Memory Address Entering A New Telephone Number Confirming User's Own Telephone NumberTimer Last Call Time Total Call Time Deleting Call Time InformationSelecting Tone Type Selecting Ringer/Vibration/Lamp Selecting Ringer Type Selecting Ringer Volume
Selecting Keytone Volume Selecting Voice Volume Selecting Length of Keytone Selecting Call Connection Tone/End Tone VolumeAlert Tones Call Connection Tone One Minute Alert Tone Area Change Alert Tone Signal Low Alert Tone Call Closing ToneLock Mode Lock Setting Setting Originating Call Restrict New Password Setting Emergency Number Clearing Emergency Call Number Erasing Called List Confidential Telephone Number Returning to DefaultsCall Related Features Auto Answer Auto Redialing Auto Area Code Setting Alarm Call Reservation Schedule Management World Time User Time Selecting Background Illumination Changing Initial Display Screen
Additional Service Registering/Clearing Transit Connection Feature Software VersionFeatures Available During Calls Sending User's Own Telephone Number Receiving Tone Volume Silencing Sending Tone (Mute Mode) Note Mode User's Own Telephone Number Electronic DialingHow to Use Message ServiceBasic UseReceiving A Message Confirming Received Voice Message Confirming Received Text Message Sending A Message Erasing All Messages SettingAppendixMenu Status Table
Information about Components andBatteryConfirmation of ComponentsStandard type battery, Medium capacity battery, User's manuall Separate items(battery, battery charger, etc.) vary according to clients' requirements.
Information about BatteryBattery Status DisplayBattery charging status can be confirmed from the illustration on the LCDdisplay of the handset showing battery charge level.?Shows that battery charge level is high.? Shows that battery charge level is low.?Shows that the battery has been almost discharged, so it is necessaryto recharge it promptly.Low voltage alert :When the battery is almost used up, a 'beep' is sounded andflashes on LCD display.After a given length of time, the handset is turned OFFautomatically.
Storage and Disposal of BatteryTo extend the battery life, do NOT leave off the battery under -10? or beyond 45?.Do not leave the battery inside your car but carry it with yourself. A battery with itslife over must be thrown to a designated place; do not throw it near open flame.Caution: Use care not to allow the battery terminals(metal plates touching thecharger) to short other metals.Continuous call and standby timeContinuous call is a status where a call conversation can be made continuously untilthe battery is discharged completely, or the required time for a complete discharge ofthe battery. Electric current is used more in standby time than during calls, so thelonger call time is, the shorter the standby time remains.
Installing Battery Pack1. Fit the upper side of the battery pack into the groove provided on the rearside of the handset.2. Slide it all the way in the arrow direction until 'click' is heard.Removing Battery PackPush down the battery pack with the removal button pressed.Hint: Be sure to turn off the power of the handset before removing thebattery pack from the handset.
Battery Use Timel Battery use time is decreased if you stay in a no service area over an extendedperiod of time.l Electric current is used more in standby time than during calls, so the longer calltime is, the shorter the standby time remains.l The use time of digital cellular phone varies depending upon mobiletelecommunications system and base station system setups.l Battery life decreases slowly over an extended period of time. If the batterycharge level is decreased to a half level, replace it with a new battery.Battery use time and standby time are as follows in the optimum condition(basedupon a brand-new battery):Standard type Medium Capacity typeContinuous Call Approx. 80?120 minutes Approx. 100?140 minutesContinuousStandby Approx. 20?45 hours Approx. 40?65 hoursl Slot mode: Information exchange interval between the handset and base stationwhen the handset is in 'pause' status.l The above data results from the measurements at slot mode 2 in our in-houselaboratory.
Information about ChargeUsing Desktop ChargerThe battery can be charged with the handset attached to the front side of thecharger. For the rear side of the charger, the battery is charged as illustrated in thediagram.
Battery Charging TimeCharging time depending upon battery and charger is as follows:l Standard type battery : 3 hoursl Medium capacity battery : 4 hoursTemperatureIt is recommended that the battery is charged at room temperature. To protect thebattery life, do not leave off the battery under 10? or beyond 45?. Also do not leaveit in your car but carry it with yourself. A brand-new battery or such a battery that hasbeen left off over an extended period of time resulting in complete discharge cannotbe charged at a high speed. In these cases, charge it for approximately 12 hours.Battery with Its Life OverA battery with its life over requires lots of charging time gradually. In general, if call time isdecreased or more time is required to charge the battery than before, it means that thebattery has run out. Replace it with a new one.Color of Status Lamp Indicating Charge Statusl Red - Shows that the battery is being charged.l Green - Shows that the battery has been charged over 90% and, if chargedapproximately 1 hour more, it will be charged completely.l Red(Blinking) - Shows either that the battery is not properly attached to thecharger or that the battery is not normal. Battery cannot be charged.
Configuration of MC-8700
Feature KeysUsed to end a call or to turn on/off the power.Used to delete characters/numbers shown on LCD or usemessage service.Used to display feature setup MENU or convert Koreanto English, vice versa.Used to store a telephone number/name/changedfeature.Used to search a stored telephone number/recentlycalled number.Used to adjust volume up and scroll menus.Used to adjust volume down and scroll menus.
Display Window(LCD)Displays receiving signal strength level.Displays no service area.Displays vibration feature setup.Displays alarm feature setup.Displays roaming area other than home servicearea.Displays in English.Displays the reception of a message.Displays battery charging level.
Basic UseTurning Power On/Off1. Open the flip, and press and hold key.The lamp lights up.2. Opening the flip and pressing/holding key displays"Call is ended" message and then the power is turned Off.l The current time is displayed automatically in an area where radiowave can be received.
Turning Handset On/Off1. Open the flip and enter an area code and telephone number.2. Press key.3. When call is finished, either close the flip or press key.•If entering a wrong telephone number, pressing key deletes each numberfrom the rear. Pressing and holding key deletes the whole number at onetime.Receiving a Call1. When the ringer sounds,2. Open the flip and start conversation.3. If the flip is opened, press any key.4. If the flip is closed, pressing key allows you to place a call.
Viewing Feature Menu1. In standby mode, pressing Displays the feature menus.2. Press (# 4) , (3R) or Key to confirm the number of a desired menu.3. Press the number of the desired menu.
How to Use Major FeaturesTelephone DirectorySearching by NameUsing this feature searches a telephone number stored into the handset.1. Press Ô ¶ Ô ¶ key in sequence.2. Entering one or more characters among desired names and pressing key approaches the name group containing the desired name.(Pressing key allows you to enter the name in English.)3. Press key.(The selected number will be displayed.)4. Pressing key places a call to the displayed number.
?Deleting Stored Numbers1. If a desired name is displayed, press key.2. Select 'YES" by pressing (# 4) , (3R) or key, and then press ey.
?Entering English textEnter A by pressing once.Enter B by pressing twice.Enter C by pressing three times.Enter 2 by pressing four times.Enter a by pressing five times.Enter b by pressing six times.Enter c by pressing seven times.?Entering special symbolsPress ¶ to enter the following special symbols:• These can be entered only in English mode.
Searching by Memory AddressUsing this feature searches a telephone number stored on the handset.1. Press Ô ¶ Ô · key in sequence.2. Confirm the address name you want by entering a desired storage address.3. Pressing key places a call to the displayed number.*Quick DialingPressing + 3V key searches telephone numbers stored in the order ofaddress.
Entering A New Telephone NumberUsing this feature enters a new telephone number on the handset.1. Press Ô ¶ Ô ¸ key in sequence.2. Enter a telephone number and press key.3. Enter a name and press key.The telephone number will be entered in the first empty address. Otherwise, youcan either change telephone number by entering address directly or enter it bychanging the address with (# 4) , (3R) or key.4. Press (# 4) , (3R)key to select whether the number is to be handled"Confidential", and then press key.T For Confidential feature, see p54.
5. Press (# 4) , (3R) key to select a ringer type. When a call is received from theperson whose telephone number is stored, the handset alerts you with the storedname and selected type of ringer *.* This feature is available only when calling party's telephone number confirming service is supported, so it may not be provided according to the situation of the service provider.*Quick DialingPressing + key confirms up to 10 recently called numbers, andpressing allows you to place a call to the telephone number with ? mark.
Confirming User's Own Telephone NumberUsing this feature confirms your own telephone number on the handset.1. Press Ô ¶ Ô ¹ key in sequence.*Quick DialingPressing +(# 4) key in sequence confirms the user's own telephonenumber.?Confirmation of Date on Lunar Base2. Pressing Ô (# 4) Ô (3R) confirms the current date on lunar base.
TimerLast Call TimeUsing this feature confirms last call time in 000 minutes and 00 seconds.1. Press è·è¶ key in sequence.Total Call TimeUsing this feature confirms the total call time in 0000 calls/00000 minutes and 00seconds.1. Press è·è· key in sequence
Deleting Call Time InformationUsing this feature erases all the call time information.1. Press è·è¸ key in sequence2. Select 'YES" by pressing (# 4) , (3R) or key, and then press key.
Selecting Tone TypeSelecting Ringer/Vibration/Lamp-The handset alerts you that a call is received in one of the 4 methods: Ringer,Vibration, Ringer after Vibration, and Lamp.-Using this feature allows you to select one among Ringer, Vibration, Ringerafter Vibration, and Lamp.1. Press è¸è¶key in sequence2. Press (# 4) , (3R) or key to select a desired mode.3. Press key. (The handset is set to the selected mode.)*Quick DialingPressing + ½ key sets the handset directly to Vibration mode. Vibrationfeature can be reset in the same method.
Selecting Ringer TypeUsing this feature selects a ringer type among 5 Ringers and 15 melodies.1. Press è¸è·key in sequence2. Press (# 4) , (3R) or key to select a desired mode.3. Press key. (The selected type is stored.)?Types of Melodies1. Gallop 6. Minuet by Boccellini 11. Jingle Bell2. For Elise 7. Wilhelm Tell Overture 12. Congratulations3. Minuet by Back, 8. The Choral Symphony 13. Werne Valley4. Maiden's Pray 9. Compliments of Love 14. Sting5. Dance from Music Box 10. Edelweis 15. Spring
Selecting Ringer VolumeUsing this feature selects ringer volume among the four levels of low, medium,high, and maximum.1. Press è¸è¸key in sequence2. Press (# 4) , (3R) or key to select a desired level of volume.3. Press key. (The selected level of volume is stored.)
Selecting Keytone VolumeUsing this feature selects a desired level of keytone volume among the fivelevels of Mute, low, medium, high, and maximum.1. Press è¸è¹key in sequence2. Press (# 4) , (3R) or key to select a desired level of volume.3. Press key. (The selected level of volume is stored.)
Selecting Voice VolumeUsing this feature selects a desired level of voice volume among the 4 levels oflow, medium, high, and maximum.• Voice volume can be adjusted easily using key with a handduring a call.1. Press è¸èºkey in sequence2. Press (# 4) , (3R) or key to select a desired level of volume.3. Press key. (The selected level of volume is stored.)
Selecting Length of KeytoneUsing this feature selects a desired length of keytone among the 2 levels ofShort and Long.1. Press è¸è»key in sequence2. Press (# 4) , (3R) or key to select a desired length of keytone.3. Press key. (The selected length is stored.)
Selecting Call Connection Tone/End Tone VolumeUsing this feature selects volume of call connection tone and end tone amongthe four levels of low, medium, high, and maximum.1. Press è¸è¼ key in sequence2. Press (# 4) , (3R) or key to select a desired level of volume.3. Press key. (The selected level of volume is stored.)
Alert Tones Using this feature sets or resets various alert tones.Call Connection ToneUsing this feature sets or resets call connection tone.1. Press è¸è½ è ¶ key in sequence2. Press (# 4) , (3R) or key to select a desired mode.3. Press key. (The phone is set to the selected mode.)
One Minute Alert ToneUsing this feature sets or resets one minute alert tone.•One Minute Alert Tone: An alert tone tone sounded at intervals of1 minute during calls.1. Press è¸è½ è · key in sequence2. Press (# 4) , (3R) or key to select a desired mode.3. Press key. (The phone is set to the selected mode.)
Area Change Alert ToneUsing this feature sets or resets area change alert tone.1. Press è¸è½ è ¸ key in sequence2. Press (# 4) , (3R) or key to select a desired mode.3. Press key. (The phone is set to the selected mode.)
Signal Low Alert ToneUsing this feature sets or resets alert tone sounded when signal strength level isso low that the call may be discontinued soon.1. Press è¸è½ è ¹ key in sequence2. Press (# 4) , (3R) or key to select a desired mode.3. Press key. (The phone is set to the selected mode.)
Call Closing ToneUse this feature sets or resets "Call End Tone"1. Press è¸è½ è º key in sequence2. Press (# 4) , (3R) or key to select a desired mode.3. Press key. (The phone is set to the selected mode.)
Lock ModeLock SettingUsing this feature sets Lock state of the handset to No, When Power On, orAlways.1. Press è¹èPassword of 4 ciphers è ¶ key in sequence.(Default password: 4 ciphers on the last number of user's own telephone number017- ???- ????)2. Press (# 4) , (3R) or key to select a desired mode.3. Press key. (The phone is set to the selected mode.)*Quick DialingPressing key allows you to enter directly terminal equipment locksetting mode.1. Pressing and holding (# 4) key(more than 1 second) allows you to enter terminalequipment lock setting mode.If pressing (# 4) key in LOCK state and entering the password, the LOCK stateisreset.
Setting Originating Call RestrictUsing this feature sets a call restrict among Origination Restrict, InternationalCall Restrict, and 'Code 700' Restrict.1. Press è¹èPassword of 4 ciphers è · key in sequence.2. Select a desired call restrict feature by pressing the number.3. Press (# 4), (3R) or key to select a desired mode.4. Press key. (The phone is set to the selected mode.)
?Origination RestrictUsing this feature, you can set the handset to aselection among 'YES', 'NO', and '1?9 Addresses'.If 'YES' is selected, all the originating calls includinginternational calls and code 700 are restricted.?International Call RestrictUsing this feature, you can set international call restrictto 'YES' or 'NO'.?Code 700 RestrictUsing this feature, you can set 'Code 700' restrict to'YES' or 'NO'.
New PasswordUsing this feature enters a new password on the handset.1. Press è¹èPassword of 4 ciphers è ¸ key in sequence.2. Enter a new password and press key.3. Enter it again and press key.(The selected number is stored.)
Setting Emergency NumberUsing this feature enters 3 emergency telephone numbers on the handset.•Emergency telephone can be used even with the handset set to LOCKmode.1. Press è¹èPassword of 4 ciphers è ¹ key in sequence.2. Emergency telephone number can be selected among the emergency numbers1, 2, and 3 by using or(# 4), (3R) key.Select a desired one, and then press key.3. Enter the emergency telephone number.4. Press key. (The handset is set to the selected mode.)
Clearing Emergency Call NumberTo clear an emergency telephone call number, press key on the displayscreen for emergency call number stored on the phone, and then erase a desiredtelephone number by using key and press key.?How to place an emergency call•Emergency call 1 : (# 4) + ¶ (Press and hold)•Emergency call 2 : (# 4) + · (Press and hold)•Emergency call 3 : (# 4) + ¸ (Press and hold)
Erasing Called ListUsing this feature erases the called list on the handset.• 10 telephone numbers can be erased from the recently called list.1. Press è¹èPassword of 4 ciphers è º key in sequence.2. Press (# 4), (3R) or key to select either 'YES' or 'NO'.3. Selecting 'YES' and pressing key erases the called list.
Confidential Telephone NumberIf this feature is set, a telephone number which has been set to 'Confidential'when entering telephone numbers is marked with "Confidential" and so it is notdisplayed on the phone display. See p30.•To place a call to a telephone number entered into the memory as'Confidential', the password must be entered.1. Press è¹èPassword of 4 ciphers è » key in sequence.2. Press (# 4), (3R) or key to select either 'YES' or 'NO'.2. Selecting 'YES' and pressing key cycles the phone to confidential memorystatus.
Returning to DefaultsUsing this feature can return all the settings set, changed, or registered on thephone to the factory default status.1. Press è¹èPassword of 4 ciphers è ¼ key in sequence.2. Press (# 4), (3R) or key to select either ‘YES’ or ‘NO’.3. Selecting 'YES' and pressing key initializes the phone.
Call Related FeaturesAuto AnswerYou can use this feature to set ringer mode so that the ringer sounds as manytimes as specified (No/Once/twice/Thee times) and then the connection is made.1. Press èºè¶key in sequence2. Press (# 4) , (3R) or key to select a desired mode.3. Press key .(The phone is set to the selected mode.)
Auto RedialingYou can use this feature to set the phone so that it re-attempts call placing atspecified intervals(No/Every 5 sec./Every 10 sec./Every 20sec.) up to 5 times.1. Press èºè·key in sequence2. Press (# 4) , (3R) or key to select a desired mode.3. Press key (The phone is set to the selected mode.)
Auto Area CodeUsing this feature sets frequently used area codes on the handset so that anarea code is displayed automatically when entering a telephone number.1. Press èºè¸key in sequence2. Enter an area code.3. Press key. (The Entered code is stored.)
Setting AlarmUsing this feature sets time on the phone so that the ringer sounds at thespecified time.1. Press èºè¹key in sequence2. Select 'YES' and press key.3. Enter a desired time, and then press key.?How to Enter TimeUse (# 4) , (3R) or key to set a.m. or p.m., and press and then pressthe desired hour + minute +
Call ReservationUsing this feature sets a telephone number and calling time on the phone so thatyou can place a call at a specified time.1. Press èºèºkey in sequence2. Select 'YES' and press key.3. Enter a reserved telephone number è èa desired time, and then press key( key for selection, (# 4) , (3R) key for change).•See "How to Enter Time" on p59.?Reserved Telephone Number DisplayWhen it reaches a reserved calling time, the phone sets ringer or vibration mode
active in order to alert you that it is the reserved time, and it displays asillustrated in the right diagram. If is pressed with "Reserved TelephoneNumber" displayed, the call is connected directly to the called party.Schedule ManagementThis feature allows you to set the time for an important schedule and theschedule name on the phone. The phone notifies you on a specified date andtime.•Up to 10 schedules can be entered.1. Press èºè»key in sequence.2. Press (# 4) , (3R) or key to select any schedule from schedule 1 toschedule 10, and then press key.3. Press (# 4) , (3R) key to select schedule by week or schedule by date andpress 4. Press to enter the date and time. (Date and time can be entered usingnumeric keys, and using can move and enter date and time.)5. Enter the schedule name, and then press
?Example of Schedule Entering and Storing•Storage of schedule by date •Storage of schedule by date monthly•Storage of schedule by date daily •Storage of schedule by week•Storage of schedule by week monthly
•To enter "monthly" or "daily", press key from month, week,or display.World TimeUsing this feature displays the current time of 21 major cities in the world.•The local time is displayed for approximately 20 seconds.1. Press èºè¼key in sequence.2. Press (# 4) , (3R) or key to select a desired mode.3. Press key.(The selected time is displayed.)? 21 Major Cities in the WorldGuam, New York, Tokyo, London, Los Angeles,Moscow, Baghdad, Bangkok, Berlin, Peking,Sidney, Chicago, Singapore, Athens, Washington,Taipei, Toronto, Paris, Hawaii, Hong Kong
User TimeYou can display the current on the phone display as early or late(up to 24 hours)as desired.1. Press èºè½key in sequence.2. Press (# 4) , (3R) or key to select 'YES'.3. Press key.(The current time plus set time are displayed.)
Selecting Background IlluminationYou can select any of 7 background illumination modes from "On when openingthe flip/Auto adjustment(Off in 5 sec.)/Always Off/Off in 5 sec./Off in 10 sec./Off in15 sec./Off in 20 sec.1. Press èºè¾key in sequence.2. Press (# 4) , (3R) or key to select a desired mode.3. Press key.(The phone is set to the selected mode.)
Changing Initial Display ScreenYou can change the initial display message in up to 8 Hangul characters/16alphabetic letters.1. Press èºè(0) key in sequence.2. Enter a desired message.(See "How to Enter Characters" on p27.3. Press key.(The phone is set to the selected mode.)
Additional ServiceIf you use additional service provided by service providers, the followingfeatures will be used conveniently. The appropriate additional service shouldhave been registered on the service provider. Some services are provided forpay, and so you are required to contact the providers.Registering/Clearing Transit Connection FeatureYou can register for transit connection service provided by Power Digital 017.1. Press è»è¶ key in sequence.2. Press (# 4), (3R) or key to select a desired service(Unconditional transit, Auto connection, or Clear).3. Press key.(If a 'dingdong' is heard, the desired mode is registered or cleared.)Press key.
Software VersionYou can confirm the software version of the phone using this feature.1. Press è (# 4) è (# 4) key in sequence.2. The phone displays the current software version.•Quick DialingSetting/Clearing Vibration Mode- Pressing and holding (3R) key sets the handset to vibration mode.•Setting/Clearing Lock mode- Pressing holding (# 4) key sets the handset to Lock mode; enteringpassword after pressing and holding (# 4) key clears Lock mode automatically.
Features Available During CallsSending User's Own Telephone NumberWhen using cellular phone service or beeper service, you can use this featuresto send your own telephone number during a call.1. Press è ¶ key in sequence.Receiving Tone VolumeUsing this features adjusts receiving tone volume in 4 levels during a call.1. Press è · key in sequence.2. Press (# 4), (3R) or key to adjust receiving tone volume.•This feature can be set easily by pressing key during acall.
Silencing Sending Tone (Mute Mode)Using this feature, you can silence sending tone during a call or clear mutemode.1. Press è ¸ key in sequence.2. With sending tone silenced, pressing key clears mute mode.Note ModeYou can enter called number during a call using this feature. (The notedtelephone number is stored on the called list.)1. Press è ¹ key in sequence.•After completing a call, pressing + key confirmsentered notes. If wishing to store them, press to store themin the same manner as when entering a telephone number.
•Pressing during a call enables you to use the note feature.User's Own Telephone NumberYou can confirm your own telephone number during a call using this feature.1. Press è º key in sequence.•In standby mode, press + (# 4) key to confirm your owntelephonenumber.Electronic DialingWhen you are prompted to enter many telephone numbers according to voicemessage in ARS mode(Telebanking service, pager service, etc.), if you haveentered them, this feature can be efficiently used.1. Enter telephone numbers.
2. Press key.3. Select a desired dial delay mode.4. After the call is connected, enter the dial number to be sent.•If you have to send the dial number several times, repeat the steps 2?4.5. Press key. Enter the name, and then press key.6. Use the same procedure for entering a new telephone number to store the dialnumber and name.•Key pause(H): When an entered telephone number is dialed and acall isconnected to the called party, pressing key sends the numbersentered after key pause(indicated as 'H')•Time delay(T): When an entered telephone number is dialed and acallis connected to the called party, the numbers entered after timedelay(indicated as 'T') is sent in approximately 2 seconds.•Hyphen(-): This is used when the user wants to insert it directlywithout using auto hyphen feature which makes a telephone numberrecognized easily.
How to Use Message ServiceBasic Use-Pressing message icon allows you to enter message menu easily.-The message menu is divided into 5 types: 1. Voice mail, 2. Text message,Message sending, 4. Clearing All Messages, and 5. Set. When a message isreceived, the phone sets ringer, vibration, or lamp active to alert you that themessage is received and to display the appropriate icon on [ ] window.This indicates that 3 text messagesincluding unread messages have beenreceived.
Receiving A MessageConfirming Received Voice MessageYou can confirm a received voice message using this feature.1. Press è ¶ key in sequence.2. Press or to confirm voice message. 3. Pressing places a call to the displayed number.
Confirming Received Text MessageYou can confirm a received text message using this feature.1. Press è · key in sequence.2. Press or to confirm text message. 3. Pressing connects you to the telephone number left by the calling party.-Mark ? indicates that the same messagehas been received repeatedly.?Deleting A Confirmed MessagePressing key after confirming a message allows it to enterDelete menu. Other messages or message list can be confirmed bypressing .
Sending A MessageYou can send a text message using this feature.1. Press è ¸ key in sequence. 2. Enter the calling party's telephone number and press , and then enter a telephone number to receive and 3. Enter a message to send. (See "How to Enter Hangul/English Characters" on p27. Up to 40 Hangul characters and 80 alphabetic letters can be sent at one time.) 4. Select a message type among "Urgent, Fast, and Normal". 5. Press key. The message will be sent.
Erasing All MessagesAll the messages can be erased by using this feature.1. Press è ¹ key in sequence. 2. Press ¶ key to delete all the messages. For 'NO", press · key.
SettingYou can set message reception display screen/reception alert using this feature.?Setting Reception Display1. Press è ºè ¶key in sequence.2. Press or key to select a desired mode. 3. Press key.•Viewing Contents: Two lines of contents from the message aredisplayed on the handset display.•Viewing Basic Information: Notification of message arrival andtime are displayed on the handset display.
?Setting Alarm for Reception of Message1. Press è ºè ·key in sequence.2. Press or key to select a desired mode. 3. Press key.•2-minute alarm: Ringer or vibration mode alerts you every 2minutes that a message has been received.•One time alarm: Ringer or vibration mode alerts you once that amessage has been received.•No alarm: The indicator lamp blinks and the handset does notalert you for incoming messages in other modes than the above-mentioned ones.
AppendixMenu Status TableMain Menus Sub-menus1. Telephone directory?Searching by Name? Searching by Memory Address? Entering A New Telephone Number? Confirming User's Own Telephone Number2. Timer? Last Call Time? Total Call Time? Erasing Call Information3. Selecting Tone Type? Ringer/Vibration/Lamp? Selecting Ringer Type? Ringer Volume? Keytone Volume? Voice Volume? Length of Keytone?Call Connection Tone/End Tone Volume? Alert Tones?Call Connection Tone?One Minute Alert Tone?Area Change Alert Tone? Signal Low Alert Tone? Call Closing Tone4. Lock Mode? Lock Setting? Setting Originating Call Restrict? New Password
Main Menus Sub-menus? Setting Emergency Number? Erasing Called List? Confidential Telephone Number? Returning to Defaults5. Call Related Features? Auto Answer? Auto Redialing? Auto Area Code? Setting Alarm? Call Reservation? Schedule Management? World Time? User Time? Selecting Background Illumination? Changing Initial Display Screen6. Additional Service? Transit Connection? Voice Mail? Power Melody Service? Music Letter Service? Power Angel Service? Software Version 7. Features Available During Calls? Sending User's Own Telephone Number? Receiving Tone Volume? Silencing Sending Tone (Mute Mode)? Note Mode? User's Own Telephone Number

Navigation menu