Motorola Mobility T56KC1 i856 iDEN PORTABLE WITH BLUETOOTH User Manual Exhibit 12

Motorola Mobility LLC i856 iDEN PORTABLE WITH BLUETOOTH Exhibit 12

Users Manual

FCC Filing Package for Motorola i856 Transceiver FCC ID: IHDT56KC1  Motorola Confidential Restricted  iDEN, Motorola Inc., 600 North US Hwy 45, Libertyville, IL 60048, USA                             WWW.MOT.COM/iDEN                                Exhibit 8:   Draft User’s Manual -- 47 CFR 2.1033(b)(3) The attached User’s Manual is the final production-intended version of the generic Motorola International English User Manual. This guide will be adapted to carrier-specific versions, but the key information herein will be retained. Translations into other languages will also be done to support the needs of other markets. Minor revisions may be made to these manuals, prior to and subsequent to, placing this product onto the market. Selected portions of the User Guide can be found as indicated below: 8.1 Part 15B Declaration of Conformity:  Page 4 8.2 Safety Section:  Page 107 8.3 Specific Absorption Rate (SAR) Data:  Page 115 8.4 Guidance for use with Hearing Aids:  Page 49, 120
User’s Guidei856
DECLARATION OF CONFORMITYPer FCC CFR 47 Part 2 Section 2.1077(a)Responsible Party Name: Motorola, Inc.Address: 8000 West Sunrise Boulevard Plantation, FL 33322 USA Phone Number: 1 (800) 453-0920Hereby declares that the product:Product Name: i856Model Number: H74XAN6JR7ANFCC-ID: IHDT56KC1Conforms to the following regulations:FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a)FCC Notice to UsersThe following statement applies to all products that have received FCC approval. Applicable products bear the FCC logo, and/or an FCC ID in the format FCC-ID: IHDT56KC1 on the product label.Motorola has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment. See 47 CFR Sec. 15.21.Class B Digital DeviceAs a personal computer peripheral, this device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See 47 CFR Sec. 15.19(3).Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.Industry Canada Notice to UsersOperation is subject to the following two conditions: (1) This device may not cause interference and (2) This device must accept any interference, including interference that may cause undesired operation of the device. See RSS-GEN 7.1.5.
Motorola, Inc. Consumer Advocacy Office 600 North US Highway 45 Libertyville, IL 60048www.hellomoto.comNote: Do not ship your phone to the above address. If you need to return your phone for repairs, replacement, or warranty service, please contact the Motorola Customer Support Center at:1-800-453-0920 (United States) 1-877-483-2840 (TTY/TDD United States for hearing impaired)Certain mobile phone features are dependent on the capabilities and settings of your service provider’s network. Additionally, certain features may not be activated by your service provider, and/or the provider's network settings may limit the feature’s functionality. Always contact your service provider about feature availability and functionality. All features, functionality, and other product specifications, as well as the information contained in this user's guide are based upon the latest available information and are believed to be accurate at the time of printing. Motorola reserves the right to change or modify any information or specifications without notice or obligation.MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. Java and all other Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries.© Motorola, Inc., 2009.Manual Number: NNTN7747A
1HELLOMOTOIntroducing your new Motorola wireless phone. Here’s a quick anatomy lesson.Left Soft KeyPerform function in lower left display.Right Soft KeyPerform function in lower right display.End/Power KeyEnd calls, exit menu system, turns phone on/off.Talk KeyMake &answer calls.Music KeyActivates Music Player.4-Way Navigation KeyAudio JackVolume KeysSpeaker KeyPTT ButtonMicro USB ConnectorConnects charger and accessories.Menu KeyFrom home screen,open main menu.OK / Play KeyContcs Mesgs Contcs MesgsReady5/10/09Ready5/10/09i856wCamera  Key
2check it out1234Press and hold thePower Key for afew seconds, or untilthe screen lights up,to turn on your phone.Press the Navigation keyup, down, left or right to highlight a menu feature.Customizable r keythat can be usedto open theSettings screen. Press the r key to select.Contcs MesgsReady5/10/09turn it on & offTo turn on your phone, press and hold . for a few seconds or until the display turns on. If prompted, enter your four-digit unlock code.To turn off your phone, press and hold . for two seconds.Note: If you press the . for more than four seconds, the handset will power “On” in Transmitters Off mode. See “transmitters” on page 43.
3contentscontentscheck it out . . . . . . . . . . .   2turn it on & off  . . . . . . .   2menu map. . . . . . . . . . . .   6use and care . . . . . . . . . .   8essentials  . . . . . . . . . . . .   9about this guide . . . . . .   9SIM card. . . . . . . . . . .   10memory card . . . . . . .   10battery  . . . . . . . . . . . .   12enable security . . . . . .   14make a phone call. . . .   15answer a phone call . .   15advanced calling . . . . .   15make a private call . . .   16answer a private call. .   16store a phone number  or private ID . . . . . . . .   18contacts . . . . . . . . . . .   18call a stored phone number or private ID  .   19your phone number  and private ID . . . . . . .   19messaging  . . . . . . . . .   19MMS features  . . . . . .  20inbox. . . . . . . . . . . . . .   24outbox  . . . . . . . . . . . .  29sent items  . . . . . . . . .   29customize messaging.   30using your handset as  a modem  . . . . . . . . . .  36basics. . . . . . . . . . . . . . .   37display  . . . . . . . . . . . .  37main menu . . . . . . . . .   38carousel menu . . . . . .  38text entry . . . . . . . . . .   39volume . . . . . . . . . . . .  42navigation key. . . . . . .  43handsfree speaker . . .   43transmitters  . . . . . . . .  43use GPS with map software . . . . . . . . . . .  43features for the  hearing impaired. . . . .  44TTY . . . . . . . . . . . . . . .  45security features. . . . .   46main attractions . . . . . .  48multimedia . . . . . . . . .  48my music . . . . . . . . . .  52my images . . . . . . . . .  60my videos . . . . . . . . . .  61camera . . . . . . . . . . . .  62camcorder  . . . . . . . . .  64PTX features . . . . . . . .  66one touch PTT  . . . . . .   74
4contentsPT manager . . . . . . . . . 75Bluetooth®  . . . . . . . . .  76call features . . . . . . . . . . 80turn off a call alert . . . . 80recent calls  . . . . . . . . . 80redial . . . . . . . . . . . . . .  81caller ID . . . . . . . . . . . .  81call forward . . . . . . . . . 81voice names  . . . . . . . .  82emergency calls  . . . . .  83international calls. . . . . 83speed dial  . . . . . . . . . . 84voicemail . . . . . . . . . . . 84selective dynamic  group (SDG) calls. . . . . 85MOTOtalkTM. . . . . . . . . .  89switching to  MOTOtalk  . . . . . . . . . . 90exiting MOTOtalk. . . . . 90channels and codes . . .  90private MOTOtalk  calls . . . . . . . . . . . . . . . 93making emergency  calls while in  MOTOtalkTM mode  . . .  94setup options. . . . . . . .  95customize. . . . . . . . . . . . 97ring tones  . . . . . . . . . . 97backlight  . . . . . . . . . . . 98wallpaper . . . . . . . . . . . 98datebook . . . . . . . . . . .  99hide or show location information  . . . . . . . .  100Legal and Safety . . . . .  102Safety and General Information  . . . . . . . .  102Operational  Precautions . . . . . . . .  103RF Energy  Interference/ Compatibility . . . . . . .  103Bluetooth. . . . . . . . . .  104Caring for the Environment by  Recycling . . . . . . . . . .  105Driving Precautions . .  105Operational Warnings  105Open Source  Software Information.  107Service and Repairs. .  108Export Law  Assurances . . . . . . . .  108Battery Use and  Safety  . . . . . . . . . . . .  108Battery Charging . . . .  110Specific Absorption  Rate . . . . . . . . . . . . . .  110AGPS and Emergency Calls. . . . . . . . . . . . . .  111Limited Warranty Motorola  Communications  Products  (International). . . . . . .  112
5contentsHearing Aid  Compatibility With  Mobile Phones . . . . . . 115Information From  the World Health  Organization . . . . . . . . 116Product Registration. . 116Wireless: The New Recyclable  . . . . . . . . . 116California Perchlorate Label. . . . . . . . . . . . . . 117Patent and Trademark Information. . . . . . . . . 117Software Copyright  Notice. . . . . . . . . . . . . 117Privacy and Data  Security  . . . . . . . . . . . 118Smart Practices  While Driving . . . . . . . 118index . . . . . . . . . . . . . .   120
6menu mapmain menuBRecent CallsLContacts• [New Contact]EMessages• [Create Message]•Voice Mail• Inbox•Drafts• Outbox• Sent Items• Net Alert1WebjMultimedia• Media Center• My Images• My Music• My Videos•Camera• Camcorder• Ring Tones•VoiceRecordSPush To Talk• Call Alert• PT Manager•Quick PTT• PTT Options•MOTOtalkTGames and Apps•Buy More• Alarm Clock Plus• My Images• Audio Player• My Videos• Java System• Memory CardCTo o l s• My Info•My Name• Line 1• Line 2• Private ID1• Private ID2•Group ID•Carrier IP•IP1 Address•IP2 Address•Profiles• [New Profile]• Standard•Car• Meeting•Office• Outdoors• Headset•PRVT Only•CNTCS Only• Alarm Clock Plus• Bluetooth• Audio Devices• Pair to Devices• Device History• Setup• Find Me•GPS• Position• Privacy•Interface• Datebook• [New Event]• Call Timers•Last Call• Phone Reset• Phone Lifetime•Prvt/Grp Reset• Prvt/Grp Lifetime• Kbytes Reset•MemouSettings (see next page)This is the standard main menu layout. Your phone’s menu may be a little different.
settings menuDisplay/Info• Wallpaper•[Buy More]• Auto Cycle• Wallpaper•Text Size• Theme• Home Icons• Backlight•Timer• Java Timer• PTT Backlight• Slide Close• Continue Task• End Task•Clock•Display•Time Format• Date Format•Year• Menu View• Icon View•List View•Tab View• Large Dialing• LanguagePhone Calls• Set Line•Any Key Ans• Auto Redial• Call Waiting• Auto Ans• Slide Activation• Minute Beep• Call Duration• TTY• Hearing Aid• Notifications• DTMF Dialing• Call Forward• PrependPersonalize• Reorder Menu• Shortcuts•Up Key•Down Key•Left Key• Right Key• Center Key•Left Softkey• Right Softkey•Power UpVo l um e• Ringers/Alerts• Speaker• Earpiece• Multimedia•KeypadVoice Playback• Speak Text• Speak Caller•Voice• Multimedia Volume Memory Card• Remove Card• Store Media• Format Card•HelpSecurity• Phone Lock• Keypad Lock• SIM PIN•GPS PIN• Change PasswordsAdvanced• Alert Timeout• Headset/Spkr• Connectivity• Reset Defaults• Return to Home• Transmitters• Phone OnlyConnections• Bluetooth•USB• Memory Card Access•Data Modem• Application Access•GPS NMEA•Help7
8use and careUse and CareTo care for your Motorola phone, please keep it away from:liquids of any kind dust and dirtDon’t expose your phone to water, rain, extreme humidity, sweat, or other moisture. If it does get wet, don’t try to accelerate drying with the use of an oven or dryer, as this may damage the phone.Don’t expose your phone to dust, dirt, sand, food, or other inappropriate materials.extreme heat or cold cleaning solutionsAvoid temperatures below 0°C/32°F or above  45°C/113°F.To clean your phone, use only a dry soft cloth. Don’t use alcohol or other cleaning solutions.microwaves the groundDon’t try to dry your phone in a microwave oven.Don’t drop your phone.
9essentialsessentialsCaution: Before using the phone for the first time, read the Important Safety and Legal information included in the gray-edged pages at the back of this guide.about this guideThis guide shows how to locate a menu feature as follows:Find it: / > u > Phone CallsThis means that, from the home screen:1Press the menu key / and then press the Settings menu option u.2Press the navigation keys ; to scroll to Phone Calls, and press the center key r to select it.symbols This means a feature is network or subscription dependent and may not be available in all areas, or might not be offered by your service provider. Contact customer service for more information. This means a feature requires an optional accessory.
10essentialsSIM cardinsert the SIM cardWarning: To avoid loss or damage, do not remove your SIM card from your phone unless absolutely necessary.memory cardYour handset comes with a memory card, memory card adapter, and memory card reader1.A memory card is removable flash memory you can use to store pictures, videos, and audio files. You can connect your phone using a Motorola data cable directly to your computer, access the memory card loaded in the phone to save or delete music, images, videos, or audio files.Find it: / > u > Connections > USB1. Depending on your service provider, the memory card, memory card adapter, and memory card reader may not be included with your phone. Your handset can be used with a Transflash or MicroSD memory card.
11essentialsinsert the memory card1Remove the battery door, lift the black plastic indicator and slide the memory card in place. Return the battery cover when you are done.Note: The first time you insert a memory card in your phone, you will see the following options: [Do Nothing], Go To Audio Player, Go To Camera, and Go To Media Center. Select the option of your choice and continue.remove the memory cardWarning: Do not remove the memory card before selecting the Remove Card option under Settings. Removing the memory card before selecting the Remove Card option could result in loss of data.1From the home screen press / > u > Memory Card > Remove Card. 2Once the handset confirms it is safe to remove the SD card, press - under OK.3Remove the battery door.
12essentials4Lift the black plastic indicator and, with your fingernail, slide the memory card out of the slot.5Close the memory card slot cover.batteryNote: Please consult “Battery Use and Safety” on page 108 before using this product.battery installation1With your fingernail, pull the battery door cover lock toward the front of the phone.
13essentials2Slide the battery door upwards until it is released from the phone. 3Remove the battery door. Note: You must remove the battery door to attach a lanyard to the phone.4Push the battery down until it snaps in place.5Replace the battery door and slide it down while pressing gently until you hear a click.
14essentialsbattery chargingNew batteries are not fully charged. charge using the charger1Pull out the connector cover, and insert the charger into the micro USB connector on your phone as shown.charge from your computerYou can partially charge your phone’s battery by connecting a Motorola-approved USB cable from your phone’s micro-USB port to a high power USB connector on a computer (not a low-power one, such as the USB connector on your keyboard or  bus-powered USB hub). Typically, USB  high-power connectors are located directly on your computer.enable securityYou must enable security the first time you power on you phone or within 10 days of first activation of your phone.1Press K under Ok.2You are prompted to enable security. Press K under Yes. A series of screens followed by the default home page displays.3Press . to return to the home screen.
15essentialsmake a phone callEnter a phone number and press , or use a voice command. See “place a call using a voice name” on page 82.To hang up press ..answer a phone call1If you want to answer the call on speaker phone, press the speaker key ).2If you want to answer the call using the handset, press ,. To hang up press ..3If you are using a Bluetooth headset, press the answer key on your headset. To hang up press the key again.advanced callingfeaturecall waitingTo accept the second call and put the active call on hold press K under Yes.To accept the second call and end the active call press ..3-way callMake or receive a phone call and press / > 3 Way. Enter the second phone number, press , and K under Join.You cannot make any other calls during a three-way call, even if one party hangs up.any key answerTo answer phone calls by pressing any key on the keypad press / > u > Phone Calls > Any Key Ans > On.
16essentialsmake a private callYour Private ID is the number at which you receive one-to-one Private calls.Talkgroup numbers are numbers through which you receive one-to-many group calls.to make a Private call1Enter the Private ID you want to call.2Press and hold the PTT button. Begin talking after your phone emits a chirping sound.3Release the PTT button to listen.To end the call press ..Note: A Private call ends automatically if there is no activity on the call for a few seconds.send call alertsSending a call alert discretely lets the recipient know that you want to talk to him or her on a Private call.When you send a call alert, the recipient’s handset displays your name and emits a series of beeps or vibrations.to send a call alert1Enter the Private ID you want to call as you would when making a Private call.2Press K under Alert.When the message Ready To Alert appears on the display, press the PTT button until the message Alert Successful appears.answer a private call1When your phone emits a chirping sound or vibrates to indicate you are receiving a
17essentialsPrivate call, wait for the caller to finish speaking.2Press and hold the PTT button and begin talking after your phone emits a chirping sound.3Release the PTT button to listen.To end the call press ..answer a call alertWhen you receive a call alert, you must:optionAnswer: Begin a Private call with the sender.Queue: Store the call alert to the call alert queue.Clear: Dismiss and delete the call alert.You cannot receive phone calls or Private calls until you do.to answer a call alert1Press the PTT button to start a Private call with the sender.or2Queue the call alert by pressing K under Queue.or3Clear the call alert by pressing K under Clear.making a phone call while in a private callWhen you are in a Private call, you can make a phone call to the other participant if that person’s phone number is stored in Contacts. 1While in a Private call press ,.2A confirmation screen will appear asking to Start Call To:.
18essentials3Press K under Yes or press r to begin the call.store a phone number or private IDYou can store a phone number or private ID in Contacts:Find it: / > L > [New Contact]1Enter a name for the new entry. Each entry’s name can contain 20 characters. 2Select a specific Ring Tone.3Select a type for the entry (Mobile, Private1, Private2, Work1, Work2, Home, Email1, Email2, Fax, Pager, Talkgroup, SDG, IP or Other). To store a private ID choose Private1 or Private2.4Enter the number for the entry and press K under Save when done.contactsfeatureedit/delete contact entryPress K under Contacts. Select a contact and press / > Edit. Change the desired content and press r. Press K under Save.set ringer IDPress K under Contacts. Select a contact and press / > Edit > [Ring Tone/Picture]. Select Ringer and chose your desired ring tone. Press K under Done.set picture IDPress K under Contacts. Select a contact and press / > Edit > [Ring Tone/Picture].Select Picture and choose your desired picture. Press K under Back > K under Save.
19essentialscall a stored phone number or private IDFind it: / > L.1Scroll to the Contacts entry.2If the Contacts entry contains more than one number, scroll left or right until the type of the number you want to call is displayed (Mobile, Private1, Private2, Work1, Work2, Home, etc.).3If you chose a phone number, press , to call the entry, or if you chose a Private ID, Talkgroup ID, or SDG List, press and hold the PTT button to call the number.your phone number and private IDFind it: / > m > My Info.messagingYour phone has the ability to use both MOSMS and Multimedia Messaging Service (MMS) messaging. The type of messaging your phone uses will be determined by your service provider. If your service provider offers messaging through MOSMS, your phone sends and receive messages using MOSMS.If your service provider offers MMS, your phone sends and receives messages using MMS. Additionally, MMS allows you to send and receive messages that may include text, pictures, videos, and audio files. create and send messages1From the home screen press K under Mesgs > [Create Message].2Enter the phone number of the person you want to send the message to and press r or press K under Search. Select
20essentialsContacts or Recent Calls to find the number you want.3Select Message: and enter the text of the message or to use a quick note press K under QNotes and scroll to the quick note you want.4If you want to send the message, press K under Send or to delete the message without sending it, press K under Cancel.quick notesWhen you are filling in the Message and Subject fields, you can add ready-made words or short phrases called Quick Notes. After you add these words or phrases, you can edit them as you would any other text. 1While you are creating a message, scroll to or select Message or Subject. 2Press K under QNotes.3Select the quick note you want to insert into the message. 4Press K under Send.MMS featuresNote: The following features are available only when using MMS.more message options To view more message fields in a message you are creating, select ....More....The following options become available:optionSubject: Create or edit the subject line.Attach: Attach a picture, audio file or voice record.Cc: Send a copy of this message to someone else.
21essentialsinsert a picture, video, and audio recordingYou can insert one or more pictures, videos, and audio files from the media center into the body of the message. You can include text in the body of your message in addition to these items. insert items While you are filling in the Message field, press  /, select Insert and choose from Insert Picture, Insert Audio, Insert Video, Capture Video, Capture Picture or Record Voice.A list of available pictures, videos, or audio files appears. You can only insert one item at a time.Select the picture, video, or audio recording you want to insert. remove an inserted item To remove an item from the message you are creating, highlight it and press K under Delete.attach a picture, video, or audio recordingYou can attach one or more pictures, audio or voice recordings from your phone into the body of the message. You can include text in the body of your message in addition to these items. Auto Replies: Allows you to create a list of possible short answers for the recipient to choose when replying to your message.Priority: Set priority Normal or High.Valid Until: Set a date after which attempts to deliver the message end, or press K under No Date.option
22essentials1While you are filling in the Attach field, press [New Attach] > and select from Browse Pictures, Capture Picture, Browse Audio, Record Voice, Browse Video, or Record Video.A list of available pictures, audio files, or voice recordings appears. 2Select the picture, audio or voice record you want to attach. If you want to attach more items, select [New Attach].3When finished, press K under Done.Note: You can only attach audio files and pictures if they are not forward locked and if their DRM settings do not prevent you from sending.Forward locked items are usually copyright protected, and you cannot share them with anyone, such as in Private calls or by uploading them from your phone.take a new picture 1While you are creating a message, scroll to any message field and press / or select Attach > [New Attach].2Select Capture Picture. This accesses the camera.3Take the picture. For instructions on how to take the picture see “camera” on page 62.4When you have captured the picture you want, press K under Save.To discard the picture, press K under Discard. You can then take another picture.5When finished, press K under Done.The picture is attached to the message and saved to the default storage location.
23essentialsrecord a videoYou can record a video to send with a message:1Select Attach > [New Attach] > Record Video. 2Record and adjust video. To view the video without saving it, press K under Review.3To save the video, press r.To discard the video without saving it, press K under Discard.4The video is attached to the message and saved to the media center in the default storage location.create a new voice recordYou can create a new voice record to send with a message:1Press / or select Attach > [New Attach].2Select Record Voice.3Say the message you want to record into the microphone. 4When you are finished recording, press r.5When finished, press K under Done.6The voice record is attached to the message and saved to the media center and the list of voice records. remove an attachmentTo remove an attachment in a message you are creating: 1Select Attach.2Scroll to the attachment you want to remove. 3Press / > Unattach.
24essentialsuse draftsWhen you save a message as a draft, it is saved in the drafts folder.Find it: Press / > E > Drafts.1Select the draft you want to edit. 2To edit the fields you want to change, follow step 2 through step 4 in “create and send messages” above.delete a draftWhen you send a draft, it is removed from the Drafts folder.1To delete a message in the Drafts folder without sending it, scroll to the message you want to delete and press K under Delete.2Press K under Yes to confirm. inboxFind it: Press / > E > Inbox.receive a message1To view the message press K under Read.2To dismiss the message notification press K under Exit.While reading a text and numeric message that contains a phone number, you can press , to call that number.threaded inboxThe threaded Inbox allows you to organize your messages by subject or sender. 1From the Message Center, Press / > Threading, and select from None, Subject, or Sender.Note: Threading by subject is dependant upon your service provider.
25essentialsread from the message center1From the home screen press K under Mesgs > Inbox.2Select the message you want to read. 3To reply to the message, press K under Reply.delete unread messages 1Scroll to the message you want to delete.2Press K under Delete and K under Yes to confirm.forward a message 1Press / > Forward. 2Create and send your message. Embedded objects and attachments are included when you forward a message. lock and unlock messagesLocked messages cannot be deleted until you unlock them. 1View the message you want to lock or unlock. 2Press / > Lock Message or Unlock Message. call a number in a message If a message you receive contains a phone number, Private ID, or Talkgroup ID in the From field, the To field, the Cc field, the Subject field, or the body of the message, you can call or send a call alert to that number. send a call alert 1View the message.2Highlight the Private ID or Talkgroup ID you want to alert. 3Press / > Alert.
26essentials4Push the PTT button. make a group call 1View the message. 2Press /.3Highlight the Talkgroup ID you want to call. 4Select Talkgroup. 5Push the PTT button. store message information to contacts If a message you receive contains a phone number, Private ID, Talkgroup ID, or an email address in the From field, the To field, the Cc field, the Subject field, or the body of the message, you can store this information to Contacts. 1View the message. 2Highlight the number or email address you want to save. 3Press / > Save Number or Save Email. 4To store the number or email address as a new entry, select [New Contact].To store the number or email address to an existing entry, select the entry. 5With the Contacts type field highlighted, press ; left or right to display the Contacts type you want to assign the number or email address. 6Press K under Save. reply to a message To reply to a message: 1View the message you want to reply to.2To reply to the sender only, press K under Reply or press K under Reply All to reply to all recipients.
27essentials3A list of short phrases appears. Select any of these phrases to add it to your messages or select [Create Reply].4Edit any message fields you want to change. 5Press K under Send.use auto repliesIf the message you are replying to was sent with auto replies, it contains a numbered list of possible replies for you to send. Press the number of the reply you want to send. The reply is sent immediately without further action.go to a websiteIf a message contains one or more website URLs, you can go to that website.1View the message.2Highlight the website URL you want to go to.3Press / > Go To Website.Note: The entire URL must appear in the message to allow you to open the website.embedded objects and attachments If a message contains pictures, videos, or audio files in the body of the message, highlight each picture, video, or audio recording to view or play it. If a message contains a picture, video, or audio recording as an attachment, open the attachment to view the picture or play the video or audio recording.open attachments1View the message.
28essentials2Highlight the attachment you want to open. Attachments appear at the end of a message.3Press r. Attachments of an unknown type cannot be opened, but can be deleted.save an embedded picture, video, or audio recording To save a picture, video, or audio recording that is part of the body of a message you receive: 1View the message. 2Highlight the picture, video, or audio recording you want to save. 3Press /. 4Select Save Picture, Save Video, or Save Audio. The item will save in the default storage location. delete an embedded picture, video, or audio recording To delete a picture, video, or audio recording that is part of the body of a message you receive: 1View the message. 2Highlight the picture, video, or audio recording you want to delete and  press /.3Select Delete Picture, Delete Video, or Delete Audio.save attachments 1View the message.2Highlight the attachment you want to save. 3Press / > Save Attachment. Selected items save to the default storage location.
29essentialsdelete attachments 1View the message. 2Highlight the attachment you want to delete. 3Press / > Delete Attachment. 4Press K under Yes to confirm. outboxThe Outbox holds all unsent messages.Find it: Press / > E > Outbox.resending failed messages from the outbox1Scroll to the message you want to resend or press the number of the message you want to resend.2Press K under Resend.cancel an unsent message1Highlight the message you want to cancel.2Press /.3Press K under Cancel.sent itemsThe Sent Items box holds sent messages.forward items from sent items1Scroll to the message you want to forward.2Press / > Forward. 3Make edits if you wish, select the recipient and press K under Send.
30essentialscheck delivery status If a message was successfully sent and you set the message to confirm delivery, you can check the delivery status: 1Scroll to the message you want to view.2Press / > Delivery Status. delete sent messages1Scroll to the message you want to delete.2Press K under Delete.3Press K under Yes to confirm.delete all unlocked sent messages1Press / > Delete All.2Press K under Yes to confirm.customize messagingFind it: / > E > / > Setup. This option is available from many  context-sensitive menus.The following options become available: optionSignature: Allows you to create a signature that is automatically inserted at the end of your messages. Signatures can be edited before sending the message. Quick Notes: Lets you create new Quick Notes and edit or delete Quick Notes you created. Cleanup: Controls how long messages remain in the Inbox and Sent Items before being deleted. Delivery Rpt Default: Allows you to be automatically notified when your message is delivered.
31essentialsmanage memoryYour text Inbox and Sent Items hold 200 messages each. The Outbox, and Drafts folder hold up to 30 messages each. If they are full, you cannot receive messages, send messages, or save drafts until you delete some items.Note: Media files and Java applications can affect the available amount of memory on your phone. If you run out of memory and your Inbox, Sent Items, Outbox, and Drafts folder are empty, delete unwanted media files and Java applications to free up memory.To view the amount of memory available in your text inbox:Find it: Press / > E > / > Setup >  Memory Size.MMS setupFind it: / > E > / > Setup > MMS Setup. This option is available from many  context-sensitive menus when you are using MMS.Memory Size: Shows a report on used and free memory in your phone.MMS Setup: opens a submenu to set MMS options. Note: Available with MMS only.Text Msg Setup: opens a submenu to set text messaging options. Note: Available with MOSMS only.option
32essentialsThe following options become available:optionFriendly Name: Allows you to create a friendly name. Your friendly name is displayed in the From field on other iDEN handsets when your message is received. Download Options: Controls whether your phone downloads new messages. Set this option to Automatic if you want your phone to download new messages automatically. Select Manual if you want your phone to prompt you before downloading new messages. Replies: Lets you create or edit and delete reply phrases you created.  text message setupFind it: / > E > / > Setup > Text Msg setup. This option is available from many  context-sensitive menus when you are using MOSMS.The following options become available:optionSrvc Cntr No: Allows you to enter a service center number. Expire After: Allows you to set the number of days before a message expires. new quick notes and reply phrases create quick notes or replies1From the Setup menu, select Quick Notes, or select MMS Setup > Replies. 2Select [New Quicknote], or [New Reply]. 3Enter text from the keypad and press r.
33essentialsedit quick notes or repliesYou can edit only Quick Note phrases you have created. 1From the Setup menu, select Quick Notes, or select MMS Setup > Replies. 2Select the quick note or reply you want to edit. 3Edit the text and press r. delete quick notes or replies you have created1From the Setup menu, select Quick Notes, or select MMS Setup > Replies. 2Scroll to the quick note you want to delete. 3Press K under Delete. 4Press K under Yes to confirm. delete all quick notes or replies you have created1From the Setup menu, select Quick Notes, or select MMS Setup > Replies. 2Press / > Delete All. 3Press K under Yes to confirm. cleanup optionsThe cleanup option controls how long messages remain in the Inbox and Sent Items before they are deleted. You set the cleanup option for the Inbox and Sent Items separately. The clean up option deletes only read, unlocked messages and sent messages. Find it: / > E > / > Setup > Cleanup.1Select Inbox or Sent Items.
34essentials2Choose a clean up option from the following list:optionOff: Messages are never automatically deleted.5 Messages: If you have more than 5 messages, messages are deleted in the order they were received, starting with the oldest, until 5 are left. 10 Messages: If you have more than 10 messages, messages are deleted in the order they were received, starting with the oldest, until 10 are left.1 Day: Messages are deleted if they are older than 1 day. 3 Days: Messages are deleted if they are older than 3 days. With these options, messages are deleted when you exit the message center after setting the option.FirstIn FirstOut: Messages are deleted as necessary on a FirstIn FirstOut basis.Custom: Lets you create a clean-up option of up to 199 messages or 99 days for the Inbox and Sent Items.3Press K under Yes to automatically delete messages now or press K under No to delete messages later. delete all messages To delete all read, unlocked messages from the Inbox, all messages in the Drafts folder, all successfully sent messages in Sent Items, or unsent messages in the Outbox: Find it: / > E. 1Select Inbox, Drafts, Sent Items, or Outbox.2Press / > Delete All. option
35essentials3Press K under Yes to confirm.delete a threadTo delete a thread from the Inbox:1From the Inbox, select a thread.2Press / > Delete Thread. 3Press K under Yes to confirm.message notificationsWhen you receive a message, your phone notifies you with text on the display, a notification tone or vibration.You can access the message or dismiss the notification.If you dismiss the notification, the message is not deleted. It can be accessed through the message center.If you are not on a phone call when you receive a message, your phone sounds a notification tone every 30 seconds until you access the message or dismiss the alert.If you are on a call when you receive a message, your phone may sound a notification tone during the call or after you end the call, depending on how you set your notification options.set notification optionsTo control whether your phone sounds message notification tones while you are on a phone call:Find it: / > u > Phone Calls> Notifications.Select from the following options:optionReceive All: Tones sound during calls for all types of messages.
36essentialsTo set notification options during a call press / > Call Setup > Notifications.using your handset as a modemYour phone can be connected to a computer via USB for use as a modem. For more specific information on how to setup your phone for use with your computer please visit www.motorola.com/support and look under the FAQ section.Message Mail Only: Tones sound during calls for mail messages; tones for all other types of messages are held until you end calls.Delay All: Tones for all types of messages are held until you end calls.Note: Delay All is the default setting.option
37basicsbasicsSee page 1 for a basic phone diagram.displayThe home screen shows when you turn on the phone. To dial a number from the home screen, press number keys and ,.Note: Your home screen may look different.Contcs MesgsReady5/10/09 DateRight Soft Key LabelLeft Soft Key Label TimeSoft key labels show the current soft key functions. For soft key locations, see page 1.status indicatorsStatus indicators are shown at the top of the home screen:Ready5/10/09   1  2    3      4        5    6    7Contcs Mesgs1Signal Strength Indicator: Vertical bars show the strength of the network connection. You can’t make or receive calls when ~ shows.
38basics2Active Phone Line: % indicates phone line 1 is ready to make calls; ' indicates phone line 2 is ready to make calls.3Speaker On/Off: Sounds associated with Private calls and group calls can be set to come through the earpiece rather than through the speaker.4Ringer Vibe/Off: Your phone is set to not ring.5Message Indicator: Shows when you receive a text message.6 Packet Data: Your handset is ready to transfer packet data or is transferring packet data when it shows a blinking arrow.7 Battery Charge Indicator: A fuller battery indicates a greater charge. Recharge the battery when your phone shows Low Battery.main menuAll your phone’s features can be accessed through the main menu. You can set the main menu to appear as List View, Tab View or Icon View.Find it: / > u > Display/Info > Menu View.carousel menuThe Carousel Menu allows you to access up to nine applications from your phone’s idle screen.accessing an application1Using the navigation key, scroll left or right until you highlight the desired application.2Press r to launch the application.
39basicsauto hide1Press / > u > Personalize > Carousel >  Auto Hide.2Select from Off, 2 seconds, 4 seconds, or  8 seconds.Note: When Auto Hide is set to Off, the Carousel Menu will always be visible on the idle screen.assigning applications1Press / > u > Personalize > Carousel.2Highlight the position on the Carousel Menu you would like the application to occupy and press r.3Highlight an application and press r to select it.text entryYour phone provides convenient ways to enter words, letters, punctuation, and numbers whenever you are prompted to enter text (for example, when adding a Contacts entry or when using Text Messaging).change the character input mode1When you see a screen where you can enter text, press / to change the character input mode.2Select one of the following options:entry methodAlphaPress a key several times for different characters.WordEnter words using a predictive text entering system that lets you enter a word with fewer keypresses.
40basicsTip: When entering text, press # to change letter capitalization (Abc > ABC > abc).word methodThe Word English text input method lets you enter text into your phone by pressing keys just once per letter.The Word English text input method combines the groups of letters found on each phone key with a fast-access dictionary of words, and recognizes what you want to text as you type. It first offers the most commonly-used word for the key sequence you enter and lets you access other choices with one or more presses of the 0 key.enter a word using “word” method character input1Select the Word character input method. 2Press the corresponding keys once per letter to enter a word (for example, to enter the word Bill, press 2 4 5 5). (If you make a mistake, press * to erase a single character. Press and hold * to delete an entire entry.)3To accept a word and insert a space, press #.SymbolsEnter symbols.NumericEnter numbers by pressing the numbers on the keypad.Text Input SettingsSelects the desired entry languages and Word Prediction features.InsertSelects a item to be inserted, such a picture, an audio/video clip or a voice recording. Note: available only when using MMS messaging.entry method
41basicsTo accept a word completion (such as Billion when you entered Bill), press ; right.If you get a word you don’t want, you can press the 0 key to see more word choices and pick the one you want.alpha methodTo enter characters by tapping the keypad: 1Select the Alpha method.2Press the corresponding keys repeatedly until the desired letter appears. (For example, to enter the word Bill, press 2 twice, 4 three times, 5 three times, and 5 three times again. If you make a mistake, press Delete to erase a single character. Press and hold Delete to erase an entire word.)By default, the first letter of an entry is capitalized and the following letters are lowercased. After a character is entered, the cursor automatically advances to the next space after two seconds or when you enter a character on a different key.Characters scroll in the following order: characters1Space . 1 ? ! , @ & : ; “ - ( ) ‘ ¿ ¡ % £ $ ¥2A B C 2 Á Ã Â À Ç3D E F 3 É Ê È4G H I 4 Í Ì5J K L 56M N ñ O 6 Ó Õ Ô Ò7P Q R S 7 ß8T U V 8 Ú Ü Û Ù9W X Y Z 90+ - 0 * / \ [ ] = > < # §#Space / Shift
42basicsWhen entering text, press and hold # to switch between lowercase and uppercase letters. The icons in the upper left-hand corner of the screen show the character type.character typeQ or TLowercaseR or UUppercaseS or VShift LockWNumericalXSymbolsvolume Press the volume keys up or down to:•turn off an incoming call alert•change the earpiece volume during calls•change the ringer volume from the home screenTip: You can quickly set your ringer to Vibrate All by holding the down volume key in the home screen.*Backcharacters
43basicsnavigation keyPress the navigation key up, down, left, or right to scroll to items in the display. When you highlight the desired item, press r to select it.handsfree speakerYou can use your phone’s handsfree speaker to make calls without holding the phone to your ear.During a call, press K under Speaker to turn the handsfree speaker On.The handsfree speaker stays on until you press K under Speaker again.transmittersConsult airline staff about the use of the Transmitters Off feature during flight. Turn off your phone whenever instructed to do so by airline staff.Transmitters Off turns off your phone’s calling and Bluetooth features in situations where wireless phone use is prohibited, but you can use the phone’s other non-calling features when Transmitters is turned Off.Find it: / > u > Advanced > Transmitters > Off.use GPS with map softwareYour phone can be connected to a PC, laptop, or PDA via USB for use as a GPS receiver. For more specific information on how to setup your phone for use with your computer please
44basicsvisit www.motorola.com/support and look under the FAQ section.features for the hearing impairedusing your phone with a hearing aidFor best results use the following optimization procedures and handset setting. They generally apply as well for users with cochlear implants:optimize your handset position and orientationWhile in a phone call slide your phone up and down, then left and right until best microphone coupling is obtained.   You also may need to adjust your hearing aid (HA) volume setting.If your HA has a telecoil, activate its switch, then also rotate the handset as illustrated to align the telecoils.Note: Some automatically switched hearing aids may need an auxiliary switching magnet.If you are unsure whether your HA is telecoil equipped or needs an auxiliary magnet, please refer to your HA user guide or contact a hearing aid professional or supplier.
Approximate telecoil location is just above the battery.Approximate telecoil location is within  6-13 mm of this location.Off - Shut offM - MicrophoneT - Telecoil45basicschoose your hearing aid settingFind it: / > u > Phone Calls > Hearing Aid.1Set this option to Microphone. Microphone coupling is now optimized. or2Set this option to Telecoil. Handset meets US federal requirements for telecoil coupling sound or set this option to Off (factory default). This is the setting for non HA users.TTYfeatureturn On TTY featurePress / > u >  Phone Calls > TTY > Use TTY > On.choose TTY modePress / > u >  Phone Calls > TTY > Type.Select from TTY, VCO or HCO.change the TTY baud ratePress / > u >  Phone Calls > TTY > Baud.Select 45.45 or 50.00.change TTY mode during a callWhile in the TTY call, press / > In Call Setup > TTY > Type.Select from TTY, VCO or HCO.Note: The TTY device must be connected to the phone through the micro-USB port.  A 2.5 mm to micro USB adapter is required to support TTY.
46basicssecurity featuresfeaturephone lockTo lock the phone press  / > u > Security >  Phone Lock > Lock Now or  Auto Lock.keypad lockTo lock the keypad press  / > u > Security >  Keypad Lock. Select Lock Now, or select Auto Lock and select from Off, 2 seconds, 4 seconds, or 8 seconds.enable SIM PINPress / > u > Security > SIM PIN > On.enable GPS PINNote: When you receive your phone, your GPS PIN is 0000. To change your GPS PIN press / > u > Security > Change Passwords > GPS PIN. Enter the current GPS PIN and enter the new four to eight digit GPS PIN.  Re-enter the new four- to eight-digit GPS PIN to confirm.change SIM PIN Press / > u > Security > Change Passwords > SIM PIN.Note: You can make emergency calls on a locked phone (see page 83).feature
47basicslock and unlock keypadWhen your phone is closed and on the home screen, your keypad locks to prevent accidental key presses.To change how long your phone waits before it automatically locks your keypad press / > u > Security > Keypad Lock > Auto Lock and select a time interval or Off.To lock your phone’s keypad, close the slide, or with the slide open, press /*.To unlock your keypad press K under Unlock, and press K under Ok.
48main attractionsmain attractionsmultimediaYour phone comes with several multimedia applications to let you access pictures, videos, and audio files stored in your phone’s memory or in the Audio, Music, Podcast, Image and Video folders on a memory card inserted in your phone’s memory card slot:•Media Center is a central repository to view all supported multimedia files on your device or your memory card. Note: The Media Center cannot read the Music and Podcast folder from the SD card.•My Music provides an enhanced music player for music and podcast files.•My Images provides a slide show, image browser and image editor.•My Videos plays video files on the display.•Camera lets you take still pictures.•Camcorder lets you take short movies.•Ringtones lets you purchase and preview ringtones for your phone.•VoiceRecord lets you record audio notes to yourself.In addition, the following audio files can be accessed through the media center:•VoiceRecords•Musical ring tones in the list of ring tones
49main attractions•Audio files saved from MMS messages received•Audio files downloaded to your phoneBecause the memory card inserted in your phone may contain files saved to it using a device other than your phone, not all types of pictures, videos, and audio files on the memory card may be accessed through your phone’s media center.Items in the media center can be sent in MMS messages and with Bluetooth. See “MMS features” on page 20 and “Bluetooth®” on page 76.Pictures in the media center can be sent in Private calls using Send via PTT. See “PTX features” on page 66.Media files supported by the Media Center include:Format Bit Rate / Info Sampling RateAAC (MPEG4 AAC-LC) .aac* , .3gp, .m4a, .3ga, .mp4Up to 320kbps 48 kHzAAC+ .aac*, m4a, .3ga, .mp4Up to 128 kbps  (16 to 128 kbps) Max: 48 kHzAAC+ Enhanced  .aac*, .m4a, .3ga, .mp4Up to 320 kbps  (16 to 320 kbps)Up to  48 kHz AMR-NB .amr, .3gp, .3ga, .mp44.75 kbps – 12.20 kbps (supports all 3GPP specified rates)8 kHz
50main attractionsAMR-WB .awb, .3ga, .3gp6.6 kbps - 23.85 Kbps (supports all 3GPP specified rates)16 kHziMelody .imy 1 – 3.5 kHz Monophonic N/AMIDI XMF  .xmf, .mmf, .xmf0, .xmf1, .mxmf64 channels N/AMIDI Stand .mid, .midi, .smf64 channels N/AMP3 .mp3*, .mpga*Up to 320kbps Up to  48 kHz Format Bit Rate / Info Sampling RatePCM 16-bit Linear .wav, .auUp to 1536 kbps Up to 48 kHz (8, 11.05, 12, 16, 22, 24, 3, 44, 48 kHz)PCM 8-bit  Linear .wav, .auUp to 1536kbps Up to  48 kHz PCM 8-bit  A-law .wav, .auUp to 704 kbps Up to  48 kHzPCM 8-bit mu-law .wav, .auUp to 704 kbps Up to 44 kHz (8, 11.05, 12, 16, 22, 44 kHz)Real Audio LBR (Cook) .rm, .ra, ramUp to 96 kbps Up to  44.1 kHz (8, 11, 22, 44 kHz)Format Bit Rate / Info Sampling Rate
51main attractions(*) These formats support album art and lyrics.Supported video file formats include:Real Audio Sipro (ACELP®.net) .rm, .ra, ram5 kbps (fixed rate)8.5/6.5 kbps (dual rate)16 kpbs (wide band)8 kHz 8 kHz 16 kHzReal  Audio 10 .rm, .ra, ramUp to 192 kbps Up to  48 kHz (8, 11, 12, 16, 22.05, 24, 32, 44.1, 48 kHz)WMA v9 L2 (also WMA v3, v7, v8)  .wma*Up to 320 kbps 48 kHzFormat Bit Rate / Info Sampling Rate Format Resolution / Bit and Frame RateExtensionMPEG4 +  AMR-NBMPEG4 +  AMR-WBMPEG4 + AAC / AAC+ /Enhanced AAC+352 x 288 and 320 x 240 (up to 256 kbps); 176 x 144 and 128 x 96 (up to 128 kbps); up to 30 fps.mp4, .3gpH.263 + AMR-NBH.263 + AMR-WBH.263 + AAC / AAC+ /Enhanced AAC+352 x 288 (up to 256 kbps); 176 x 144 and 128 x 96 (up to 64 kbps); 15 fps.3gpReal Video G2 / 8 / 9Up to 320 kbps, 320 x 240, 15 fps.rm, .rmvb
52main attractionsmy musicYour handset includes a music player that you can use to play music files stored in the phone memory and the MUSIC/AUDIO/PODCAST directories on the memory card inserted in your phone.The music player groups the music files into folders and lists. When you select a music file to play, the music player plays this file, then plays the other music files grouped with it. The music player also plays podcasts you download to your computer and then save on the Podcast directory on your phone’s memory card. You can mark highlights within a podcast file to help you find the parts you most want to listen to. If your service provider offers MMS, you can send details of the podcast to a friend and send feedback to the podcast creator using MMS messages.understanding the memory card folder structureWhen you first insert the memory card into your phone, five folders are created: Audio, Image, Music, Podcast, and Video. In order to view files stored on the memory card, you must store the given file in its corresponding format folder: audio files such as ring tones, and voice recordings to the Audio folder, pictures to the Image folder, music files such as songs to H.264Up to 320 kbps, 320 x 240, 15 fps.mp4, .3gpWMV8 / WMV 9Up to 384 kbps, 320 x 240, 24 fps.wmv, .asfFormat Resolution / Bit and Frame RateExtension
53main attractionsthe Music folder, Podcasts to the Podcast folder and videos to the Video folder.filename rules When naming files stored on the memory card, the following rules apply: •The filename can contain UTF8 characters, including ASCII, however only supported characters will be displayed.•The filename can be up to 255 characters long, including the file extension, however only the first 32 characters will be displayed.Warning: If a music file name is longer than 255 characters, including the file format (.MP3), the song will not be visible on the player and therefore can not be played. This can be corrected by renaming the file and replacing it on the card.play music files Find it: / > j> My Music or press [.Note: The i856w does not have a Music Key and a Play Key.1Scroll to choose how you want your music played (Songs, Playlists, Albums, etc.).Tip: The Songs folder contains all the music files on the memory card in a single list. 2To play the first music file in the folder, press K under Play. (If the selected folder contains subfolders, this plays the first music file in the first of the subfolders.)Press r to view the folder’s contents. Scroll to a music file and press K under Play or y to play the first music file in it. Any time you are viewing a list of folders with the music player, you can scroll to a folder and press K under Play to start playing the
54main attractionscontents of that folder or press r to view the contents of the folder. To stop viewing a folder and return to the folder or list that contains it, press K under Back.play music while loading filesThe first time the music player finds music files on your memory card, it loads and organizes these files. This may take a long time for a large number of files. To play music while files are loading:Find it: / > j > My Music.1Scroll through songs and folders while loading is going on the background. 2Scroll to a music file or folder and press K under Play.The following options become available through the navigation panel:optionPause and Resume: Press K under Pause or y to pause, and press K under Play or y to resume playing paused music files.Skip to Next or Previous: Press and release ; right or left to skip to the next or previous music file.Fast Forward and Rewind: Press and hold ; right or left for 2 seconds to fast forward or to rewind.
55main attractionsset up the music playerFind it: / > j > My Music > / > SetupThe music player can be set up with the following options by pressing / > Setup:optionShuffle: Lets you set the music player to play the music files in a list or folder in random order. Repeat: Lets you set the music player to play one or all the music files in a list or folder repeatedly. Visuals: Lets you choose among different types of visual equalizers which sync with the Music.3D Music: Lets you experience surround effects when the handset is tethered to a stereo headset. Setting the 3D Music feature to On, allows you to select effects from the list of Music Reverbs.Album View: Lets you choose to view either a list view or an image view.Auto Update: Lets you reload all music files every time you launch My Music. If you set Auto Update to Off, it will follow the last known music library configuration in order to save loading time.Equalizer: Lets you customize the sound of the music player.View: Lets you choose between Default view and Folder view.Music Reverbs: Lets you choose a 3D sound effect for use with the 3D Music feature.work with playlists Playlists are lists of music files you create from the files already available through My Music. option
56main attractionsPlaylists enable you to organize music files, but they do not change anything in other folders or on the memory card. Adding or deleting a file on a playlist does not copy, delete or move it. create a playlist Find it: / > j > My Music > Playlists >  [Create New]. 1Enter a playlist name. Note: If you do not assign a name, the playlist is named Playlist followed by a number. For example, the first playlist you create without naming is automatically named Playlist-1.2Select [Add Songs]. A list of all music files appears. Tip: For options to help you sort through this list, press /. 3Select each file you want on the playlist. A checkmark appears by each selected file. Tip: To deselect a selected item, scroll to a selected file and press r.4When you are finished selecting files, press K under Done and K under Save.The following options are available for existing playlists by pressing / > My Music> Playlists > / > Edit Playlist:optionReorder Songs in a Playlist: You can change the order of the music files while creating or editing the playlist by pressing / >  Reorder Songs. Scroll to the song you want to move, press K under Grab, and then scroll to the place where you want the song to appear and press K under Insert.
57main attractionsuse the favorites playlistThe Favorites playlist is a permanent playlist. You can Add To Favorites, remove and change the order of the music files, but you cannot rename or delete music files.Find it: / > j > My Music > Songs.Remove Songs: You can remove some or all songs while creating or editing a playlist.Before you have saved a new playlist or while editing a playlist, scroll to the song you want to remove and press / >  Remove Song and press r, or you can select Remove All Songs. Press K under Yes to confirm and K under Save. Reorder Playlists: You can change the order of the playlists in the Playlists folder. Press / > Edit playlist > Reorder Playlists. Scroll to the playlist you want to move and press K under Grab, and then scroll to the place where you want the playlist to appear and press K under Insert.Delete a Playlist: While in the music player select Playlists. Scroll to the playlist you want to delete and press / > Delete Playlist. Press K under Yes to confirm.optionEdit a Playlist: You can change a playlist name, add music files, remove music files, and change the order of the music files. Select a playlist and press / > Edit Playlist. Make changes and press K under Save.Delete all Playlists: While in the music player select Playlists. Press / > Delete All Playlists and press K under Yes to confirm.Note: This deletes all playlists except the Favorites playlist.Reload Music: Searches your memory card for music files.option
58main attractionsSelect the song you want to add to your favorites and press / > Add To Favorites.work with podcastsFind it: / > j > My Music > Podcasts.Note: The Podcasts folder is empty until you download podcasts from your computer.1Scroll to view individual podcast episodes or folders containing multiple episodes of the same program. 2Press r to view the podcast episodes within a folder or the details screen of an individual podcast episode. You can pause, resume, fast-forward, and rewind just as with any other music file.Some functions differ when playing a podcast:•Pressing y when you have scrolled to a podcast displays a screen showing podcast details, but does not play the podcast. To play the podcast, press K under Play. After you begin playing the podcast, pressing y pauses and resumes the podcast.•If the podcast you are playing contains highlights, pressing and releasing the ; right or left skips to the next or previous highlight within the podcast, or to the beginning or end of the podcast.highlightsHighlights are portions of a podcast that are marked to help you find them more easily. You can use the music player to add and delete highlight markers. Press and release (don’t hold) the ; right or left to find them.You can play all the highlights in a podcast and skip everything that is not marked as a highlight using Highlights Only.
59main attractionsadd a highlight marker1While playing a Podcast press / >  Add Highlights. 2Press K under On to mark the beginning. 3Go to the point in the podcast that you want to mark as the end of the highlight and press K under Off. 4Press K under Back.Tip: Highlight markers can be deleted by pressing / > Clear or pressing / >  Edit Highlights > / > Clear All Highlights from the Podcasts menu.send podcast informationYou can only share podcast details with others. If you want to share podcast details, you have saved to your memory card, you can send it in an MMS message that can be saved and downloaded onto their computer.Find it: / > j> My Music > Podcasts > / > Forward Details > Send.background musicYour handset has the capability to play music in the background while you are accessing other features like Settings, Media Center, Bluetooth, GPS, Contacts, MMS, Datebook, Memo, Recent Calls, and others.You can also enjoy listening to your favorite background music while browsing the web, reading news or checking the weather.play music in the backgroundFind it: / > j> My Music > Songs. 1Select a music file and press y to play the song. 2Press / > Hide Player.
60main attractionsThe music player continues playing and the handset returns to the home screen. To jump back to the music player, press K under Player.my imagesMy Images lets you easily browse, edit and view a slide show of images on your phone or memory card on your display. my images menuThe My Images menu has many photo management features. The following options are available for images by pressing / >  j > / > and choose one of the following:optionEdit: Displays several options for editing your photos including: Crop, Rotate/Flip, Color Adjustment, Resize, Borders, Stamps, Text and Text Bubble.Slideshow: Starts a slide show containing images from the currently highlighted image.Save as New: Lets you save an image with a new filename.Preview: Displays the highlighted image.Send Via BLuetooth: Lets you send the image via Bluetooth.Rename: Lets you rename the image filename.Delete Current: Deletes the current highlighted image.Delete Multiple: Lets you chose multiple images to delete at one time.Switch to Card: Toggles between images stored on the phone or memory card.Set as Wallpaper: Sets the highlighted image as the device wallpaper.option
61main attractionsviewing imagesFind it: / > j > My Images.1Press / > Slideshow to view a show of all images in the current folder.2Press ; left or right to switch between viewing images on the phone and the memory card. The # and * keys can also be used to scroll the images.my videosMy Videos lets you easily browse and view video files on your phone or memory card. Find it: / > j > My Videos. viewing videosMy Videos will display the video in portrait mode by default. Tip: To change the default to landscape mode press / > Full Screen.my videos setup menuFind it: / > j > My Videos > / > SetupThe My Videos Setup Menu allows you to change the following settings: optionView: Displays options for viewing your videos as Default and Folder view.3D Audio: Lets you turn 3D audio On and Off.Reverbs: Lets you choose from a number of 3D audio visual settings.Set As Caller ID: Allows you to assign the highlighted image to a Contact.option
62main attractionscameraYou can save pictures taken with the integrated camera in your phone’s memory, and can access them through the Media Center. Pictures you take can be sent via Private Calls, Bluetooth, or MMS message. You can also set them as your phone’s wallpaper.Note: The Camera function is available only when the slide is open.access the camera To access the camera, press / > j > Camera. To take pictures aim the camera lens and press K under Capture or press r.To save the picture, press r.To discard the picture without saving it, press K under Discard.From the camera viewfinder, you can press / to enter Menu Options.The following options become available:optionMedia Center: Opens the Media Center application.Record Video: To switch the camera to camcorder mode.Zoom: To set the camera’s zoom to 1x, 2x, or 4x.Remove Card: To safely remove the memory card from the phone.Self Timer: Delay capturing the picture for a selected number of seconds. The values are: Off (default), 10 seconds, 15 seconds, 20 seconds.To turn off the timer before the picture is captured, press K under Cancel.
63main attractionsaccess the media center You can access the media center from the camera at any time by pressing / > Media Center, except when you are using the Camera Setup menu or viewing the memory screen. The media center contains all your pictures, music files, and videos located on your phone’s memory. Press * and # to filter your results.customize the cameraFind it: / > j > Camera > / > Camera SetupGPS Tag: Allows you to turn GPS Tag feature On of Off.Picture Quality: Adjust the picture quality to Normal or Fine.Picture Size: Set up the picture size to Max (1024x1280), XL (480x640), L (240x320), M (120x160), S (96x128), or Wallpaper (176x220). You can also set picture size from the viewfinder by pressing   left and right.White Balance: Sets the white balance to Automatic, Sunny, Cloudy, Fluorescent, Tungsten or Night.Exposure Control: Adjusts the exposure of the picture from -2 to +2.Style: Sets the type of picture effect to Normal, Black and White, Sepia, Solarization and Negative.Memory Usage: Shows the total amount of Used, Free, and total Capacity of the phone’s memory and of the SD memory card.optionMemory Card: Allows you to remove the memory card, set where videos are stored: On Phone or Prefer On Card, format the memory card, and to display Help.Camera Setup: To access the camera set up screen.option
64main attractionsThe following options become available:optionAsk for Name: If this option is On, you are prompted to enter a name for each picture before saving. Otherwise, pictures are automatically saved with the date and a number as their names.Shutter Sound: Set the default sound the camera makes when is taking a picture.Default Size: Sets the default value for the Picture Size option. Default Quality: Sets the default value for the quality of the picture. GPS Tag : If this option is On, pictures will be tagged with the geographic location of where they were taken. camcorderYou can use your phone’s camcorder feature to record videos.Find it: / > j > Camcorderrecord video1Press K under Record, or press r.2To stop recording and discard the partially recorded video, press K under Cancel.3To stop recording the video press K under Stop.4To save the recorded video, press r.Note: The Camcorder function is available only when the slide is open.From the camcorder viewfinder, you can press / to enter Menu Options.
65main attractionsThe following options become available:optionMedia Center: Opens the Media Center application.Capture Picture: To switch the camera to picture mode.Zoom: To set the camera’s zoom to 1x, 2x, or 4x.Remove Card: To safely remove the memory card from the phone.Video Size: Set up the picture size to Min (128x96), Med (176x144), or Max (352x288). You can also set picture size from the viewfinder by pressing   left and right.Video Length: Allows you to choose between Short, to limit video length for sending via MMS message, or Maximum for longer videos.Note: When set to Maximum, video length is limited to 60 seconds when stored to your phone’s memory. When stored to a memory card, video length is limited to available space on the memory card, or two hours.Memory Usage: Shows the total amount of Used, Free, and total Capacity of the phone’s memory and of the memory card.Memory Card: Allows you to remove the memory card, set where videos are stored: On Phone or Prefer On Card, format the memory card, and to display Help.Camera Setup: To access the camera set up screen.option
66main attractionscustomize the camcorderFind it: / > j > Camcorder > / > Camera SetupThe following options become available:optionAsk for Name: If this option is On, you are prompted to enter a name for each picture before saving. Otherwise, pictures are automatically saved with the date and a number as their names.Shutter Sound: Set the default sound the camera makes when is taking a picture.Default Video Size: Sets the default value for the Video Size option.  deleting a recorded videoIf you do not want to save the recorded video, press K under Discard to delete the recorded video and return to the video viewfinder.sending video via MMS messageTo send the recorded video via an MMS message, press K under Send. The video will be automatically attached to a new MMS message.Note: To ensure the video file is small enough to be sent via MMS, set the Camcorder video length to Short.PTX featuresWith Push To View features, your phone can send and receive the following items through Private calls with other phones that have this capability:•Short text messages11. Additional charges may apply.
67main attractions•Pictures1•Datebook events•My Info•Contact information•Location information1You can choose to send messages, pictures, events, My Info, Contacts or Location information to the Private ID you are engaged in a Private call with, Private IDs on the Recent Calls list, and Private IDs stored in Contacts.When you make or receive a Private call, your phone automatically determines whether the phone you are engaged in a Private call with is able to receive each of these items. Your phone saves this information for as long as the Private ID is on your Recent Calls list or is saved in your Contacts. Your phone updates the saved information each time you make or receive a call to or from that Private ID.Note: You cannot send PTT feature items during Talkgroup calls or SDGC calls.send messagesThe Push to Send Messages feature lets you send short text messages through Private calls.When you send a message, it appears on the display of the phone you are engaged in the Private call with.begin a message and choose a recipient You can begin a message during a Private call, from the Contacts list, the Recent Calls list, or from the PT Manager.begin a message during a Private callWhile in a Private call, press / >  Use PTT Feature > Send Message.
68main attractionsNote: The first time you send a message, Messaging Fees May Apply Continue? appears and you are prompted to respond. Press K under Yes to acknowledge the message.begin a message from the Contacts or the Recent Calls list1From the Contacts or the Recent Calls list, select the entry containing the Private ID you want to send the message to.2Press / > Use PTT Feature > Send Message.begin a message from the PT ManagerThe PT Manager lets you select the Private ID you want to send the message to from Contacts or the Recent Calls list.Find it: / > N > PT Manager > Send Message.Then select A Contact or A Recent Call to see a list of entries from the Contacts or the Recent Calls list that can receive messages.create messagesAfter you have begun a message and chosen a recipient, a screen appears that lets you create the text of the message you want to send. Your message may be up to 400 characters long. You can choose from a list of ready-made words or short phrases called Quick Notes. You can use a Quick Note as it is or edit it before you send it. Editing a Quick Note changes the Quick Note for this message only and will not change the Quick Note on the list. send a completed messageAfter you have completed your message, press the PTT button to send it.receive messages When you receive a message, a message notification appears on the display.
69main attractionsTo view the message: Press K under Read. To dismiss the message: Press K under Dismiss.reply to a message1View the message.2Press K under Reply.3Create the message and press the PTT button to send it.send picturesYou can send pictures stored in the Media Center through Private calls. The picture you send appears on the Private call recipient’s display. If the recipient accepts the picture, their phone saves the picture. The picture then appears in that phone’s recent call list.The first time you send a stored picture after turning the phone on, Picture Fees May Apply Continue? appears and you are prompted to respond.Note: You cannot make or receive Private calls while transmitting or receiving a picture.send a picture during a call1While in a Private call, press K under Picture or press / > Use PTT Feature >  Send Picture.A list of pictures that can be included in a Private call appears.2Select the picture you want to send.3Press the PTT button to send the picture. 4Wait while the picture is transmitted. The Private call is temporarily interrupted while a picture is transmitted.
70main attractions5When prompted, press the PTT button to resume the Private call. start a call by sending a picturefrom the media centerFind it: / > j > Media Center1Scroll left or right to Media: Pictures.2Select the picture you want to send.3Press / > Send Via... > Send Via PTT.4Select A Contact or A Recent CallA list of contacts that have Private IDs and are able to receive pictures appears.5Select the name of the person you want to send the picture to.6Press the PTT button to send the picture. 7When prompted, press the PTT button to resume the Private call. from the PT Manager:Find it: / > S > PT Manager > Send Picture.1Select A Contact or A Recent CallA list of contacts that have Private IDs and are able to receive pictures appears.2Select the name of the person you want to send the picture to.3Select Browse Picture or Capture Picture.4Press the PTT button to send the picture.5Once picture has been sent, when prompted press the PTT button to resume the call.receive a picture When someone sends you a picture, your phone emits a tone or vibrates and a message appears asking if you want to accept the picture.
71main attractionsPictures you receive are saved either to your phone’s memory or SD card. They are accessible through the media center. When you see a message asking if you want to accept the picture, press Yes to accept or No to decline.clear a picture from the displayIf you want to clear a picture from your phone’s display while still on a call, press  / > Clear Screen. send a datebook eventto send a datebook event during a private call1While in a Private call press / >  Use PTT Feature > Send Event. Note: If these options do not appear on the menu, the Private ID you are engaged in a private call with is not able to receive Datebook events.2If you want to create a new datebook event, press K under New and create the event in your datebook. If you want to chose an existing event do so.3If the event is a recurring event: Select  This Event Only to send only the event selected. Select Repeat Events to send all occurrences of the event.4Push the PTT button to send the event.send my info1While in a Private Call press / >  Send My Info via PTT., and push the PTT button to send.or2From the home screen press / > C > My Info > / > Send My Info via PTT. Enter a Private ID or press K under Browse to
72main attractionschose a recipient from Contacts, Recent Calls or Memo, and press r. Push the PTT button to send.set my info sending optionYou can control what portion of the information in My Info is sent and whether it is sent automatically in every call or only when you choose to send it. Find it: / > S > PT Manager > Configure >  PTT My Info > Info to Send1Select or remove the fields you want to send.2Press K under Done.The information your phone sends always includes My Name, and Private ID1. You may also send Line 1, Line 2, Carrier IP, and Private ID2 depending on your sending options. automatic sending To control whether you send your information automatically: Find it: / > S > PT Manager > Configure >  PTT My Info > Auto Send1Select On or Off2When you make a call in which your information is sent automatically, the name you entered in the My Name field of My Info appears on the display of the recipient’s phone, even if your name and Private ID are not stored in the recipient’s Contacts.send contact information1While in a Private Call press / >  Use PTT Feature.2Select Send Contact and select the contact information you want to send.
73main attractions3Push the PTT button to send.or1From the home screen press / > S > PT Manager > Send Contact.2Enter the Private ID number of the person you want to send the Contact information to or press K under Browse.3Select from Recent Calls, Contacts, or Memo.Select the contact information you want to send and push the PTT button.send your locationYou can transfer your approximate location information through Private calls to other enabled phones. Using the integrated GPS feature, the following location information can be shared:•Time Stamped Latitude/Longitude•Relative Location or Direction and distance from the sender in Miles or KilometersFind it: / > S > PT Manager > Send Location.1Select A Contact or A Recent Call.A list of contacts that have Private IDs and are able to receive locations appears.2Select the name of the person you want to send your location to.3Press the PTT button to send your location.Note: The location information can be stored in the recipient’s recent call list.turn PTT features on and off You can turn your phone’s ability to send and receive messages, pictures, and Datebook events and location info on and off.
74main attractionsYou cannot turn your phone’s ability to send and receive My Info and contact information on and off. Find it: / > S > PTT Options > On/Off PTT Features.1Check or uncheck Messages, Pictures, Events or Location.one touch PTTFind it: / > S > PTT Options > One Touch PTT.One Touch PTT sets your phone to do any of the following each time you press the PTT button from the home screen:optionOff: Nothing happens when you press the PTT button from the home screen.Quick PTT: Go to Quick PTT. See “quick PTT” on page 75.Last Call: Call the most recent Private ID or Group on the recent calls list. Assigned Number: Call a Private ID you assign. Enter the number using your keypad, or press K under Search. Select Contacts, Recent Calls, or Memo.Note: If you are entering a Talkgroup number, enter # before the number.PT Manager: Go to PT Manager. See “PT manager” on page 75.Send Message: Go to the first screen to send a message.Send Picture: Go to the first screen to send pictures. See “send pictures” on page 69.Send Event: Go to the first screen to send a Datebook event.Send My Info: Go to the first screen to send My Info. See “send my info” on page 71.option
75main attractionsquick PTTQuick PTT lets you quickly make a call, create an SDG list or make a SDG call when accessing any Private IDs on your phone. To view a list of Contacts and SDG lists with Private IDs in Contacts: Find it: / > S > Quick PTTTo move between Contacts, Recent Calls, or Memo, use the ; left or right, or press * or #.To make a Private call or SDG call: 1Select the entries you want.2Press K under Done.3Push the PTT button.To save your selections as a SDG list press / > Save SDG. For more information about SDG lists, see “selective dynamic group (SDG) calls” on page 85.If you want to assign a name to the SDG list, enter the name.Note: If you do not assign a name, the SDG list is named SDG followed by the number of members in the SDG list. For example, SDG (8) for a SDG list with 8 members.PT managerThe PT Manager lets you quickly access PTT features, and other Private call features, from the main menu. Find it: / > S > PT ManagerSend Contact: Go to the first screen to send a contact. See “send contact information” on page 72.Send Location: Go to the first screen to send your location. See “send your location” on page 73.option
76main attractions1Select Quick PTT, Send Message, Send Picture, Send Event, Send My Info, Send Contact, Send Location, or Configure. After choosing what PTT item you are sending, select a contact and press the PTT button to send.or2Select Configure to configure your PTT Quick Notes, PTT My Info, PTT Location, One Touch PTT, or On/Off PTT Features.Bluetooth® Find it: / > cturn Bluetooth on or offYou can turn your phone’s Bluetooth feature on or off. While Bluetooth power is on, your phone can communicate with other devices.Find it: / > C >c > Setup > Power1Select On to power Bluetooth On.2Select Name if you wish to assign a name to your handset.3Select Find Me Duration to determine the amount of time in which your handset can be found by other Bluetooth devices.You can turn off Bluetooth if you want to prolong battery life or if you enter an area where Bluetooth is prohibited.make a Bluetooth connectionconnect your handset with a Bluetooth headsetFind it: / > C > c > Audio Devices>  [Look for Devices]1Follow the instructions on your Bluetooth headset to set it up to be found.2Once your Bluetooth headset is set to be found press r on your handset. Your phone will scan for the Bluetooth headset
77main attractionsuntil it finds it. Press r when you see the name of the Bluetooth headset on your screen.3Your handset requires that you create a bond in order to connect with a Bluetooth headset. Press K under Yes when you are prompted to bond with the headset.4Enter the Bluetooth pass key.Some Bluetooth devices ship with Bluetooth PINs. Please refer to your Bluetooth device’s user guide to locate this information.If a device ships without a Bluetooth PIN, then you can enter any PIN for that device. To establish a connection to that device, enter the same PIN for both your phone and the device. For example, if you enter 1234 as the device’s PIN, then enter 1234 as your phone’s PIN.5Press K under Ok.This handset offers the Bluetooth auto pair feature with auto pair compatible Motorola devices. When bonded via Bluetooth with a certain device, the pin will not be requiredconnect your handset with another Bluetooth deviceFind it: / > C > c > Pair to Devices1Select the device you want from the list of found devices on your screen.2Create a bond if you are prompted to do so.If you have previously connected to a device, the device will be stored on your phone so you can connect with it easily.use Bluetooth during a callYou can connect with available Bluetooth devices during a call.1While in a call, press / > Use Bluetooth.
78main attractions2Select the audio device you want to connect to from the list of Audio Devices.If the Audio Devices list contains only one device, your phone will try to connect to it.send information via BluetoothYour handset can transfer Contacts entries, Datebook events, audio files, pictures and videos to another Bluetooth device.The receiving device must be within 32 feet (10 meters) of your phone in order to connect.Note: Files sent or received may be up to 10 MB, depending on your service provider. File transfers will not work if a mcroSD card is not installed in your phone.sending information1From within Contacts, Datebook, or Media Center, select the Contacts entry, Datebook event, audio file, video, or picture you want to send.2Press / > Send Via... > Bluetooth.3Select the device you want to transfer the contact information to, or search for the device by selecting [Look for Devices].4If prompted, bond with the device.Your phone connects with the devices and transfers the information.Note: Media files transferred from a PC may be copied to your microSD card’s root directory and may not be accessible by your phone. (See “understanding the memory card folder structure” on page 52.) To check their location, connect your phone to your computer as a USB mass storage device. (See “memory card” on page 10.) Move any media files in the root directory to their appropriate folder. For more information on
79main attractionstransferring files from your PC via Bluetooth, consult the operating system’s user guide.
80call featurescall featuresturn off a call alertYou can press the volume keys to turn off a call alert before answering the call.recent callsThe recent calls list contains information associated with calls you have made and received and call alerts you have received.When you send or receive Private calls, the recent call list contains the following PTX items with those calls:•contact information received•My Info received•short text messages received•pictures sent or received•Datebook events receivedThe recent calls list displays up to 20 of the most recent calls and call alerts.1Press / > Recent Calls or from the idle screen, press , ‘to access Recent Calls.2Scroll through the list.3To view more details of the item  press r.store an item to contacts from recent callsPhone calls, Private calls, My Info, Contacts or Location entries received from other phones
81call featurescan be stored to the Contacts list from the Recent Calls list.Find it: / > Recent Calls.1Scroll to or select the item you want to store.2Press K under Save to store the information as a new entry in the Contacts list.or3Select an existing contact and update the information.4Press K under Save to save your changes.redialTo redial your last outgoing call, press and hold ,. If your last outgoing call was a Private Call, push the PTT button to initiate a new Private call.caller IDCaller ID allows people to identify a caller before answering the phone by displaying the number of the incoming call. If you do not want your number displayed when you make a call, just follow these easy steps.To block your phone number from being displayed for a specific outgoing call:1Press * 6 7.2Enter the number you want to call.3Press ,.To permanently block your number, call your customer service provider.call forwardCall forwarding sends calls to the phone numbers you specify. You can forward all calls to one number or forward missed calls to
82call featuresdifferent numbers depending on the reason you missed the call. You can forward phone lines 1 and 2 independently.Find it: / u > Phone Calls > Call Forward.1To forward all calls select All Calls and select To to enter the phone number you want all your calls forwarded to.or2You can specify a forwarding number for each type of missed call by selecting Detailed and choosing the following options:If Busy: When your handset is on a call or transferring data.If No Answer: When you do not answer on the first 4 rings.If Unreachable: When your handset is out of coverage or powered off.voice namesYou can place calls by speaking commands to your phone if you have previously assigned a voice name to your contacts.assign voice names to contacts1Press K under Contacts and select  [New Contact].2Assign a name, phone number and select [Options].3Select Voice Name and follow the prompt to record the voice name. Press r to stop recording and store the voice name.4Press K under Back and K under Save.place a call using a voice name1Press the speaker key ) until you are prompted to say the voice name.The handset will automatically place the call.
83call featuresemergency callsYour service provider programs one or more emergency phone numbers that you can call under any circumstances. Emergency calls can be made without a SIM card, when your phone is locked, or when the SIM card is blocked.Note: Emergency numbers vary by country. Your phone’s preprogrammed emergency number(s) may not work in all locations, and sometimes an emergency call cannot be placed due to network, environmental, or interference issues.Dial 911 or your local emergency number to be connected to an emergency response center. If you are on an active call, you must end it before making an emergency call. When you make an emergency call, your phone’s GPS Enabled feature can help emergency service personnel find you, if you are in a location where your phone's GPS antenna has established a clear view of the open sky and your local emergency response center has the equipment to process location information. Because of the limitations of this feature, always provide your location, to the best of your knowledge, to the emergency response center when you make an emergency call.Note: Emergency calls cannot be placed while the keypad is locked, or if your phone is displaying a No Service message on the screen. To unlock the keypad, if the slide is closed, push up the slide to reveal the keypad. If the slide is open, press K under Unlock, and press K under Ok.international callsIf your phone service includes international dialing, press and hold 0 to insert your local
84call featuresinternational access code (indicated by +). Then, press the keypad keys to dial the country code and phone number.speed dialEach phone number stored in Contacts is assigned a Speed Dial number, which you can use to call that number.1From the home screen, use the keypad to enter the Speed Dial number assigned to the phone number you want to call.2Press #.3Press ,.turbo dialThe first nine entries in your contacts are set for turbo dial. They can be called by pressing and holding the speed dial number (1 through 9).voicemailTo receive voice mail messages, you must first set up a voice mail account with your service provider.receiving a messageWhen you receive a voice mail message, New VoiceMail Message appears on the display.To call your service provider’s voice mail system and listen to the message:1Press K under Call.2To dismiss the message notification:•Press r or K under Back.If the caller leaves a message, this icon 3 appears on the display, reminding you that you have a new message.
85call featuresselective dynamic group (SDG) callsA SDG call is similar to a Private call, but is made to all members of a SDG list at once. A SDG list is a group of Private IDs that you create using your phone. A SDG list must contain at least 2 members and can contain up to 20 members.You can create a SDG list for one call only or store it to Contacts so you can call it any time.Note: In order to store SDG lists to your phone, you must use a SDG-capable SIM card. For more information about  SDG-capable SIM cards, contact your service provider. SDG lists created with your phone are not readable by an older iDEN SIM-based phone.You can use Send via PTT to send SDG lists to other phones that have this capability.create SDG lists in contactsFind it: / > L. 1Select [New SDG List].2If you want to assign a name to the SDG list, enter the name.If you do not assign a name, the SDG list is named “SDG” followed by the number of members in the SDG list. For example, “SDG (8)” for a SDG list with 8 members.3Add Private IDs. See “Add Private Numbers” below.4Press K under Save.
86call featuresadd private numbersYou can add Private IDs to a SDG list by selecting them from Contacts, the recent calls list, or memo. You can add all members in an existing SDG list by selecting the list. You can select more than one member from Contacts and the recent calls list. A checkmark appears next to each selected item.add members from contacts, the recent calls list, or memo1While creating a SDG list, select [Add Member] or select [Add Number] and press K under Browse.2Scroll to the members you want from Contacts, the recent calls list, or Memo, and press r. A checkmark appears next to each selected member. If you chose [Add Number] in step one, you can enter a Private ID number from the keypad. 3Press K under Done.remove members or SDG listsremove a member from a SDG list1From Contacts, scroll to the SDG list you want to delete the member from.2Press K under Edit.3Scroll to the member you want to remove. 4Press / > Remove Member.5Press K under Save.remove all members from a SDG list1From Contacts, scroll to the SDG list you want to delete the member from.2Press K under Edit.3Press / > Remove All.
87call features4Press K under Yes to confirm.delete a SDG list from Contacts1Scroll to the SDG list you want to delete.2Press / > Delete SDG List.make SDG Calls1From Contacts or the recent calls list, scroll to or select the SDG list you want.2Push the PTT button.start a SDG call with a private IDYou can start a SDG call with any Private ID you want to call.1From the home screen, enter the Private ID, or from the Contacts list or the recent Calls List, scroll to an entry containing the Private ID.2Press / > Call SDG.3Add more Private IDs. See “add private numbers” on page 86.If you want to save the SDG list you have created press / > Save SDG, or if you do not want to save the SDG list, press K under Done.4Push the PTT button to make the call. SDG call InformationWhile you are in a SDG call, the following appears on the screen:•The name of the SDG list•The name or the Private ID of the person speaking•The number of participants in the SDG call
88call featuresSDG Call DetailsDuring a SDG call, you can view details about the other SDG list members, such as their name or Private ID, and their status on the call. To view SDG call details, press K under Details.In the SDG Call Details view, these icons appear next to member names or Private IDs:FThe member of the SDG list who is speaking.EA member of the SDG list who is active on the SDG call, but not speaking.DA member of the SDG list who has exited the call.HA member of the SDG list who could not be reached on the SDG call.GA member of the SDG list whose status is unknown.
89MOTOtalkTMMOTOtalkTM Note: This feature may not be offered by your service provider.With MOTOtalk, you can make and receive Two-Way Radio calls without network coverage. If you are travelling outside your service provider's coverage area, receiving a poor signal, or otherwise want to temporarily avoid using your service provider's network, you can switch to MOTOtalk and talk with anyone on your code and channel who is within range.Note: Range will vary based on terrain,  man-made structures and atmospheric conditions.MOTOtalk lets you:•Use code or private mode operation•Use up to 10 channels•Communicate with standalone MOTOtalk radiosNote: You cannot use MOTOtalk with older Family Radio Services products.The following features and main menu items are unavailable while in MOTOtalk:•On-network phone or Private calls•Data transmission•Incoming message notification•Datebook•Call forwarding•Call Timers•Call alerts
90MOTOtalkTMswitching to MOTOtalkTo set your phone to MOTOtalk:1From the home screen press / > p > MOTOtalk and press r.2Select Go to MOTOtalk.Switching to MOTOtalk Please Wait displays.After a few seconds, the MOTOtalk idle screen displays. When MT Ready displays, you can begin using MOTOtalk. While in MOTOtalk, this icon 4 displays.exiting MOTOtalkTo switch to network mode:1From the MOTOtalk idle screen, press  / > p > MT Options and press r.2Select Exit MOTOtalk.Switching to Network Please Wait displays. After a few seconds, the network idle screen appears.talk rangeWhile in MOTOtalk mode, phones should be a minimum of 6 feet apart to maximize performance and improve transmission range. channels and codesYour phone has 10 channels and 15 codes. Channels are divided into sets of frequencies. Other parties may be talking on the same channel. Codes minimize interference from other parties when you are sharing the same channel.MOTOtalk opens to the last code and channel used on your phone. You can view the code and channel your phone is currently set to on the MOTOtalk idle screen.
91MOTOtalkTMFor code calls, all parties must be on the same channel and code. For private MOTOtalk calls, the person you are calling must be in MOTOtalk and set to the same channel to receive your call.Note: When making a code call, all parties that are on your code and channel can hear your conversation.setting channels and codesTo set a channel:1From the MOTOtalk idle screen, press K under Edit.2Scroll to Channel.3Press K under Edit.4Select a channel.5When you are finished, press K under Back to return to the MOTOtalk idle screen.To set a code:1From the MOTOtalk idle screen, press K under Edit.2Scroll to Code.3Press K under Edit.4Select a code.5When you are finished, press K under Back to return to the MOTOtalk idle screen.making code callsTo make a code call:1From the MOTOtalk idle screen or the channel and code edit screen, press and hold the PTT button. Transmit appears on the first line of display. Begin speaking after your phone emits the MOTOtalk tone.Note: The MOTOtalk tone consists of 4 rapid beeps.
92MOTOtalkTM2Release the PTT button to listen.If you receive an error message:•No one is on your channel or code.•You are out of range.receiving code callsWhen you receive a code call, Receive will appear on the display. After hearing the MOTOtalk tone, you have 6 seconds to reply before the call times out.To reply to the call, press the PTT button.Note:  An incoming MOTOtalk call can be terminated at any time by pressing ..receiving all MOTOtalk callsIf you set the code to Receive All, your phone can receive MOTOtalk transmissions from any phone that is set to the same channel, regardless of the code (1-15). When you receive transmissions with the code set to Receive All, the code that the transmission was received on will replace Receive All on the display. Note: You cannot initiate a code call when the code is set to Receive All.To set the code to Receive All:1From the MOTOtalk idle screen, press K under Edit.2Scroll to Code.3Press K under Edit.4Select Receive All.5When you are finished, press K under Back to return to the MOTOtalk idle screen.To reply to a call with the code set to Receive All: •Press the PTT button.
93MOTOtalkTMprivate MOTOtalk callsIf you want to have a private conversation without other parties listening in, you can make a private MOTOtalk call. The person you are calling must be in MOTOtalk and set to the same channel to receive your call.private onlyTo set MOTOtalk to ignore code calls, so that you only make or receive private MOTOtalk calls, set your code to Pvt Only.To set the code to Pvt Only:1From the MOTOtalk idle screen, press K under Edit.2Scroll to Code.3Press K under Edit.4Select Pvt Only.5When you are finished, press K under Back to return to the MOTOtalk idle screen.making a private MOTOtalk call1Enter the PTN of the person you want to call on your channel. If the PTN is more than 10-digits, enter the last 10-digits of the PTN, or scroll to a number or name in Contacts or the Recent Calls List.2Press and hold the PTT button. Begin speaking after your phone emits the MOTOtalk tone.3Release the PTT button to listen.The number or name of the person you are calling will appear in the display.If you receive an error message:•The PTN you entered is invalid. •The person that you are trying to reach is in network mode.
94MOTOtalkTM•The person that you are trying to reach is set to a different channel.•The person that you are trying to reach is out of range.receiving a private MOTOtalk callThe number or name of the person who is calling will appear in the display.To reply, press the PTT button.ending code calls and private MOTOtalk callsCode calls and private MOTOtalk calls will end automatically after 6 seconds of inactivity. The MOTOtalk idle screen will display.Note: A private or code MOTOtalk call can be interrupted during the 6 second idle time by another code call or private call.making emergency calls while in MOTOtalkTM modeIf you attempt to make an Emergency 911 call while in MOTOtalk mode, your phone will automatically exit MOTOtalk mode and attempt to find a network signal. If you are out of network coverage your phone will not be able to make an emergency 911 cellular call until you go back into the network coverage area. You must wait until the phone reconnects to the network before attempting to make an emergency 911 cellular call.
95MOTOtalkTMsetup optionsYou can set up MOTOtalk options on the MT Options screen. You can access this screen in both network and MOTOtalk modes.To access setup options:1Press / > p > MOTOtalk or  MT Options.2Select Setup.You can set the following MOTOtalk options:•Direct Launch: Launch directly into MOTOtalk when you select MOTOtalk from the main menu. •State Tone: Have an alert sound notify you that you have used MOTOtalk for a specified interval.using direct launchTo set your phone to launch MOTOtalk when you select MOTOtalk from the main menu:1From the Setup screen, scroll to Direct Launch and press r.2Select On.Note: If Direct Launch is set to On, the MOTOtalk setup options will be unavailable from the main menu. However, you can still access setup options while in MOTOtalk by pressing / and selecting > MT Options > Setup.To turn off Direct Launch:1From the Setup screen, scroll to Direct Launch and press r.2Select Off.MT Options will now display when you select MOTOtalk from the main menu.
96MOTOtalkTMusing state toneTo set your phone to alert you after you have used MOTOtalk for a specified interval:1From the Setup screen, scroll to State Tone and press r.2Select the interval after which you want the tone to sound.For example, if you select 1 hour, you will be notified every hour that you are in MOTOtalk.To turn off State Tone:1From the Setup screen, scroll to State Tone and press r.2Select Off.
97customizecustomizering tonesTo set the ring tone your phone makes when you receive phone calls, call alerts, message notifications, pictures sent using Send via PTT or Datebook reminders:Find it: / > j > Ring Tones1Make sure Vibrate All is set to Off.2Scroll through the list of ring tones and select the one you want to assign.  Vibrate sets your phone to vibrate instead of making a sound. Silent sets your phone to neither vibrate nor make a sound.3Select the features you want to assign the ring tone to.4When you are finished, press K under Done.Note: This icon , appears on the display if you set your phone to Silent. This icon 5 appears on the display if you set the phone to Vibrate All.set your phone to vibrateYou can set your phone to vibrate instead of making a sound when you receive all phone calls, Private calls, group calls, SDG calls, call alerts, message notifications, pictures sent using Send via PTT, and Datebook reminders.Find it: / > j > Ring Tones > Vibrate AllSet this option to On or Locked.
98customizeSetting this option to On lets you turn Vibrate All off by pressing the up volume control. Setting this option to Locked requires you to press and hold the up volume control to turn Vibrate All off. The Locked option helps prevent you from accidentally turning Vibrate All off.To set Vibrate All to On or Locked using the volume controls: Press the volume controls to turn down the volume as far as possible to set Vibrate All to On. Continue to hold the down volume control to set Vibrate All to Locked.To set your phone to vibrate instead of making a sound for some features but not others:Find it: / > j > Ring Tones1Make sure Vibrate All is set to Off.2Select Vibrate from the list of ring tones.3Select the features you want to set to make no sound.4When you are finished, press K under Done.backlightSet the amount of time that the display and java apps. backlights remain on, or turn off the PTT backlight feature to extend battery life.Find it: / > u > Display/Info > BacklightwallpaperSet a previously saved photo or picture as a wallpaper (background) image in your phone’s display or throughout all menu screens.Find it: / > u > Display/Info > Wallpaper1Select Wallpaper.2Scroll through the list of pictures and press r to select a picture.
99customizeYou can set the wallpapers to change automatically after a certain period of time by turning on the Auto Cycle feature located in the Wallpaper menu. You can select from 5 minutes, 15 minutes, 1 hour, 8 hours, Daily, or Startup.datebookfeaturecreate datebook eventsTo create a new Datebook event press / > C > Datebook > [New Event].see datebook eventTo see a calendar event press / > C > Datebook. Press ; left or right to see the day and ; up or down to see the events.event reminderWhen an event reminder occurs press K under View.Press K under Back to close the reminder.receive datebook events via PTTTo view the information while still in the Private call press r.The 5 most recent events received from a Private ID are stored with the that Private ID on the recent calls list.To store events to the Datebook press K under Save while viewing the event you want to store.feature
100customizedatebook setupFind it: / > C > Datebook > / > SetupYou can view or change these options:optionsStart View: Sets Datebook to start in day view, week view, or month view when you access Datebook.Daily Begin: Sets the beginning of your day. This is the earliest time of day displayed in week view, if you have a 12-hour day view.Delete After: Sets the amount of time Datebook waits to delete an event after it occurs.Time Shift: Lets you shift the times of all Datebook events. This is useful if you are traveling to a different time zone.Alert Timeout: Sets the amount of time a tone continues to sound when you receive a Datebook reminder.Clock: Controls whether the time and date appear on the home screen; sets time and date format; sets year.hide or show location informationYour phone is equipped with a Location feature for use in connection with location-based services that may be available in the future.Turning Location On will allow the network to detect your position using GPS technology, making some applications and services easier to use. Turning Location off will disable the GPS location function for all purposes except 911, but will not hide your general location based on the cell site serving your call. No application or service may use your location options
101customizewithout your request or permission.  GPS-enhanced 911 is not available in all areas.set your privacy optionsFind it: / > C > GPS > PrivacySelect from the following options:optionRestricted: No Java or similar software applications may view the location of your phone. However, location information may still be available to the phone’s owner, fleet manager, or account administrator.Unrestricted: All applications may view the location of your phone, without notifying you.By Permission: When an application attempts to view the location of your phone, you will be prompted to give permission. However, location information may still be available to the phone’s owner, fleet manager, or account administrator.change GPS PINWhen you receive your phone, your GPS PIN is 0000. To change your GPS PIN press / > u > Security > Change Passwords > GPS PIN. Enter the current GPS PIN and enter the new four to eight digit GPS PIN. Re-enter the new four- to eight-digit GPS PIN to confirm.option
102Legal and SafetyLegal and SafetySafety and General InformationThis section contains important information on the safe and efficient operation of your mobile device. Read this information before using your integrated multi-service portable radio.*Exposure to Radio Frequency (RF) EnergyYour mobile device contains a transmitter and receiver. When it is ON, it receives and transmits RF energy. When you communicate with your phone, the system handling your call controls the power level at which your phone transmits.Your mobile device is designed to comply with local regulatory requirements in your country concerning exposure of human beings to RF energy.Portable Radio Product Operation and EME ExposureYour Motorola radio product is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy (EME):•United States Federal Communications Commission, Code of Federal Regulations; 47 CFR part 2 sub-part J.•American National Standards Institute (ANSI) / Institute of Electrical and Electronics Engineers (IEEE). C95. 1-1992.•Institute of Electrical and Electronics Engineers (IEEE). C95. 1-2005 Edition.*•International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998.•Ministry of Health (Canada). Safety Code 6. Limits of Human Exposure to Radio frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999.•Australian Communications Authority Radio communications (Electromagnetic Radiation - Human Exposure) Standard 2003.•ANATEL, Brazil Regulatory Authority, Resolution 303 (July 2, 2002) “Regulation of the limitation of exposure to * The information provided in this document supersedes the general safety information in user’s guides published prior to May 1, 2006
Legal and Safety103electrical, magnetic, and electromagnetic fields in the radio frequency range between 9 kHz and 300 GHz.” “Attachment to Resolution 303 from July 2, 2002." Operational PrecautionsFor optimal mobile device performance, and to be sure that human exposure to RF energy does not exceed the guidelines set forth in the relevant standards, always follow these instructions and precautions.Phone OperationWhen placing or receiving a phone call, hold your mobile phone as you would a landline telephone. Speak directly into the microphone.Two-way radio operationYour radio product has been designed and tested to comply with national and international standards and guidelines regarding human exposure to RF electromagnetic energy, when operated in the two-way mode (at the face, or at the abdomen when using an audio accessory) at usage factors of up to 50% talk/50% listen.Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the PTT button. To receive calls, release the PTT button. Transmitting 50% of the time or less, is important because this radio generates measurable RF energy only when transmitting (in terms of measuring for standards compliance).When using your radio product as a traditional two-way radio, hold the radio product in a vertical position with the microphone one to two inches (2.5 to 5 cm) away from the lips.If you wear the mobile device on your body, always place the mobile device in a Motorola approved clip, holder, holster, case or body harness. If you do not use a body-worn accessory supplied or approved by Motorola and are not using the mobile device in the intended use positions along side the head in the phone mode or in front of the face in the two-way radio mode, or if you hang your device from a lanyard around your neck, keep the device at least 2.5 centimeters (1 inch) from your body when transmitting.Approved AccessoriesFor a list of approved Motorola accessories call 1-800-453-0920, or visit our website at www.motorola.com/phoneaccessories.RF Energy Interference/CompatibilityNearly every electronic device is subject to RF energy interference from external sources if inadequately shielded, designed or otherwise configured for RF energy compatibility. In some circumstances your mobile device may cause interference with other devices.
104Legal and SafetyFollow Instructions to Avoid Interference ProblemsTurn OFF your mobile device in any location where posted notices instruct you to do so.In an aircraft, turn off your mobile device whenever instructed to do so by airline staff. If your mobile device offers an airplane mode or similar feature, consult airline staff about using it in flight.Implantable Medical DevicesIf you have an implantable medical devices, such as a pacemaker or defibrillator, consult your physician before using this mobile device.Persons with implantable medical devices should observe the following precautions:•ALWAYS keep the mobile device more than 20 centimeters (8 inches) from the implantable medical device when the phone is turned ON.•DO NOT carry the mobile device in the breast pocket;•Use the ear opposite the implantable medical device to minimize the potential for interference.•Turn OFF the mobile device immediately if you have any reason to suspect that interference is taking place.Read and follow the directions from the manufacturer of your implantable medical device. If you have any questions about using your mobile device with your implantable medical device, consult your health care provider.Hearing AidsSome phones may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer or physician to discuss alternatives.Other Medical Devices and Health Care FacilitiesIf you use any other personal medical devices, consult your physician or the manufacturer or your device to determine if it is adequately shielded from RF energy. Turn off your radio product when instructed to do so in hospitals or health care facilities that may be using equipment that is sensitive to external RF energy.BluetoothThis device supports Bluetooth 1.2 including HSP, HFP, OPP, DUN, PBAP, and BPP. In order for Bluetooth devices to communicate with one another, they must utilize the same Bluetooth profile. To determine the profiles supported by other Motorola devices, visit www.hellomoto.com/bluetooth. For other devices, contact their respective manufacturer.Certain Bluetooth features including those listed may not be supported by all compatible Bluetooth-enabled devices, and/or the functionality of such features may be limited in certain devices, or by certain wireless carriers. Contact your wireless carrier about feature availability and functionality.
Legal and Safety105Caring for the Environment by RecyclingThis symbol on a Motorola product means the product should not be disposed of with household waste.Disposal of your Mobile Device and AccessoriesPlease do not dispose of mobile devices or electrical accessories (such as chargers, headsets, or batteries) with your household waste. These items should be disposed of in accordance with the national collection and recycling schemes operated by your local or regional authority. Alternatively, you may return unwanted mobile devices and electrical accessories to any Motorola Approved Service Center in your region. Details of Motorola approved national recycling schemes, and further information on Motorola recycling activities can be found at: www.motorola.com/recyclingDisposal of your Mobile Device Packaging and User’s GuideProduct packaging and user’s guides should only be disposed of in accordance with national collection and recycling requirements. Please contact your regional authorities for more details.Driving PrecautionsThe use of wireless phones while driving may cause distraction. Discontinue a call if you can’t concentrate on driving.Additionally, the use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products.Responsible driving practices can be found in the “Smart Practices While Driving” section (see page 118).Operational WarningsObey all posted signs when using Mobile devices in public areas.Potentially Explosive AtmospheresAreas with potentially explosive atmospheres are often but not always posted, and can include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, or areas where the air contains chemicals or particles, such as grain, dust or metal powders.When you are in such area, turn off your handset, and do not remove, install, or charge batteries unless it is a radio product type especially qualified for use in such areas as “Intrinsically Safe” (for example, Factory Mutual, CSA, or UL approved). In such areas, sparks can occur and cause an explosion or fire.
106Legal and SafetySymbol KeyYour battery, charger, or portable radio may contain symbols, defined as follows:Symbol Definition032374oImportant safety information follows.032376oDo not dispose of your battery or phone in a fire.032375oYour battery or phone may require recycling in accordance with local laws. Contact your local regulatory authorities for more information.Do not throw your battery or phone in the trash.032378oLi Ion BATTYour phone contains an internal lithium ion battery.Do not let your battery, charger, or phone get wet.Listening at full volume to music or voice through a headset may damage your hearing.Batteries and ChargersCaution: Improper treatment or use of batteries may present a danger of fire, explosion, leakage, or other hazard. For more information, see the “Battery Use and Battery Safety” section in this user’s guide.Keep Your Mobile Device and Its Accessories Away from Small ChildrenThese products are not toys and may be hazardous to small children. For example:•A choking hazard may exist for small, detachable parts.•Improper use could result in loud sounds, possibly causing hearing injury.•Improperly handled batteries could overheat and cause a burn.Glass PartsSome parts of your mobile device may be made of glass. This glass could break if the product is dropped on a hard surface or receives Symbol Definition
Legal and Safety107a substantial impact. If glass breaks, do not touch or attempt to remove. Stop using your mobile device until the glass is replaced by a qualified service center.Seizures/BlackoutsSome people may be susceptible to epileptic seizures or blackouts when exposed to flashing lights, such as when playing video games. These may occur even if a person has never had a previous seizure or blackout.If you have experienced seizures or blackouts, or if you have a family history of such occurrences, please consult with your physician before playing video games or enabling a flashing-lights feature (if available) on your mobile device.Discontinue use and consult a physician if any of the following symptoms occur: convulsion, eye or muscle twitching, loss of awareness, involuntary movements, or disorientation. It is always a good idea to hold the screen away from your eyes, leave the lights on in the room, take a 15-minute break every hour, and stop use if you are very tired.Caution About High Volume UsageWarning: Warning: Exposure to loud noise from any source for extended periods of time may affect your hearing. The louder the volume sound level, theless time is required before your hearing could be affected. To protect your hearing:•Limit the amount of time you use headsets or headphones at high volume.•Avoid turning up the volume to block out noisy surroundings.•Turn the volume down if you can’t hear people speaking near you.If you experience hearing discomfort, including the sensation of pressure or fullness in your ears, ringing in your ears, or muffled speech, you should stop listening to the device through your headset or headphones and have your hearing checked.For more information about hearing, see our Web site at www.motorola.com/hearingsafety (in English only).Repetitive MotionWhen you repetitively perform actions such as pressing keys or entering finger-written characters, you may experience occasional discomfort in your hands, arms, shoulders, neck, or other parts of your body. If you continue to have discomfort during or after such use, stop use and see a physician.Open Source Software InformationFor instructions on how to obtain a copy of any source code being made publicly available by Motorola related to software used in this Motorola mobile device you may send your request in writing to the address below. Please make sure that the request includes the model number and the software version number.
108Legal and SafetyMOTOROLA, INC.OSS Management600 North US Hwy 45Libertyville, IL 60048USA.The Motorola website opensource.motorola.com also contains information regarding Motorola’s use of open source.Motorola has created the opensource.motorola.com to serve as a portal for interaction with the software community-at-large.To view additional information regarding licenses, acknowledgments and required copyright notices for open source packages used in this Motorola mobile device, please select  Main Menu > Java Apps > OpenSourceNotices. In addition, this Motorola device may include self-contained applications that present supplemental notices for open source packages used in those applications.Service and RepairsIf you have questions or need assistance, we’re here to help.Go to www.motorola.com/support, where you can select from a number of customer care options. You can also contact the Motorola Customer Support Center at 1 (800) 453-0920 (United States), 1 (877) 483-2840 (TTY, TDD United States for hearing impaired).Export Law AssurancesThis product is controlled under the export regulations of the United States of America and Canada. The Governments of the United States of America and Canada may restrict the exportation or re-exportation of this product to certain destinations. For further information contact the U.S. Department of Commerce or the Canadian Department of Foreign Affairs and International Trade.Battery Use and Safety• Motorola recommends you always use Motorola-branded batteries and chargers. The warranty does not cover damage caused by non-Motorola batteries and/or chargers. Caution: Use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or other hazard. Improper battery use, or use of a damaged battery, may result in a fire, explosion, or other hazard.•Battery usage by children should be supervised.• Important: Motorola mobile devices are designed to work best with qualified batteries. If you see a message on your display such as Invalid Battery or Unable to Charge, take the following steps:•Remove the battery and inspect it to confirm it bears a Motorola “Original Equipment” hologram;
Legal and Safety109•If there is no hologram, the battery is not a qualified battery;•If there is a hologram, replace the battery and retry charging it;•If the message remains, contact a Motorola Authorized Service Center.•When storing your battery, keep it in a cool, dry place.•It is normal over time for battery life to decrease, and for the battery to exhibit shorter runtime between charges or require more frequent or longer charging times.Important: Handle and store batteries properly to avoid injury or damage. Most battery issues arise from improper handling of batteries, and particularly from the continued use of damaged batteries.DON’Ts• Don’t disassemble, crush, puncture, shred, or otherwise attempt to change the form of your battery.• Don’t let the phone or battery come in contact with water. Water can get into the phone’s circuits, leading to corrosion. If the phone and/or battery get wet, have them checked by your carrier or contact Motorola, even if they appear to be working properly.• Don’t allow the battery to touch metal objects. If metal objects, such as jewelry, stay in prolonged contact with the battery contact points, the battery could become very hot.• Don’t place your battery near a heat source. Excessive heat can damage the phone or the battery. High temperatures can cause the battery to swell, leak, or malfunction. Therefore:•Do not dry a wet or damp battery with an appliance or heat source, such as a hair dryer or microwave oven.•Avoid leaving your phone in your car in high temperatures.DOs• Do avoid dropping the battery or phone. Dropping these items, especially on a hard surface, can potentially cause damage.• Do contact your service provider or Motorola if your phone or battery has been damaged from dropping or high temperatures.Important: Use Motorola Original products for quality assurance and safeguards. To aid consumers in identifying authentic Motorola batteries from non-original or counterfeit batteries (that may not have adequate safety protection), Motorola provides holograms on its batteries. Consumers should confirm that any battery they purchase has a “Motorola Original” hologram.Motorola recommends you always use Motorola-branded batteries and chargers. Motorola mobile devices are designed to work with Motorola batteries. If you see a message on your
110Legal and Safetydisplay such as Invalid Battery or Unable to Charge, take the following steps:•Remove the battery and inspect it to confirm that it has a “Motorola Original” hologram;•If there is no hologram, the battery is not a Motorola battery;•If there is a hologram, replace the battery and retry charging it;•If the message remains, contact a Motorola authorized service center.Important: Motorola’s warranty does not cover damage to the phone caused by non-Motorola batteries and/or chargers.Warning: Use of a non-Motorola battery or charger may present a risk of fire, explosion, leakage, or other hazard.Proper and safe battery disposal and recycling: Proper battery disposal is not only important for safety, it benefits the environment. Consumers may recycle their used batteries in many retail or service provider locations. Additional information on proper disposal and recycling may be found on the Web:• www.motorola.com/recycling• www.rbrc.org/call2recycle/ (in English only)Disposal: Promptly dispose of used batteries in accordance with local regulations. Contact your local recycling center or national recycling organizations for more information on how to dispose of batteries.Warning: Never dispose of batteries in a fire because they may explode.Battery ChargingNotes for charging your phone’s battery:•When charging your battery, keep it near room temperature. Never expose batteries to temperatures below 0°C (32°F) or above 45°C (113°F) when charging.•New batteries are not fully charged.•New batteries or batteries stored for a long time may take more time to charge.•Motorola batteries and charging systems have circuitry that protects the battery from damage from overcharging.Specific Absorption RateYour model wireless phone meets the governmentalrequirements for exposure to radio waves.Your mobile device is a radio transmitter and receiver. It is designed and manufactured to not exceed limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government and by the Canadian regulatory authorities. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that
Legal and Safety111were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed for the safety of all persons, regardless of age or health, and to account for any variations in measurements.The exposure standard for mobile devices employs a unit of measurement known as the Specific Absorption Rate (SAR). The SAR limit set by the FCC and by the Canadian regulatory authorities is 1.6 watts per kilogram (W/kg), averaged over one gram of tissue. Tests for SAR are conducted using procedures accepted by the FCC and by Industry Canada with the mobile device transmitting at its highest certified power level in all tested frequencies. Although the SAR is determined at the highest certified power level, the actual SAR level of the mobile device while operating can be below the maximum value. This is because the mobile device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station, the lower the power output.Before a mobile device is available for sale to the public in the U.S. and Canada, it must be tested and certified to the FCC and Industry Canada that it does not exceed the limit established by each government for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) submitted to the FCC and available for review by Industry Canada. The highest SAR value for this mobile device when tested for use at the ear is 0.88 W/kg, and when worn on the body, as described in this guide, is 1.15 W/kg. Body-worn measurements can differ, depending upon available accessories and regulatory requirements. The SAR information includes the Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product.While there may be differences between the SAR levels of various mobile devices and at various positions, they meet the governmental requirements for safe exposure. Please note that improvements to this product model could cause differences in the SAR value for later products; in all cases, products are designed to be within the guidelines.Additional information on SAR can be found on the Cellular Telecommunications & Internet Association (CTIA) Web site:http://www.phonefacts.netor the Canadian Wireless Telecommunications Association (CWTA) Web site:http://www.cwta.caAGPS and Emergency CallsWhen you make an emergency call, your mobile device can use Assisted Global Positioning System (AGPS) satellite signals to tell the emergency response center your approximate location.The AGPS feature has limitations, so always tell the emergency response center your best knowledge of your location. Remain on the phone for as long as the emergency response center instructs you.
112Legal and SafetyAGPS might not work for emergency calls, if your local emergency response center does not process AGPS location information. For details, contact your local authorities.If your mobile device cannot find strong AGPS satellite signals, the location of the nearest cell tower in contact with your mobile device is automatically provided to the emergency response center.AGPS Performance Tips•Go outside and away from underground locations, covered vehicles, structures with metal or concrete roofs, tall buildings, and foliage. Indoor performance might improve if you move closer to windows, but some window sun shielding films can block satellite signals.•Move away from radios, entertainment equipment, and other electronic devices that might interfere with or block AGPS satellite signals.AGPS uses satellites controlled by the U.S. government and subject to changes implemented in accordance with the Department of Defense AGPS user policy and the Federal Radio Navigation Plan. These changes might affect AGPS performance.Limited Warranty Motorola Communications Products (International)What Does this Warranty Cover?MOTOROLA warrants the MOTOROLA manufactured iDEN Communication Products listed below (“Product”) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below:Products Covered Length of CoverageiDEN Subscriber Digital Mobile and Portable UnitsOne (1) year from the date of purchase by the first consumer purchaser of the product unless otherwise provided for below.Product Accessories (manufactured by or under license from MOTOROLA).One (1) year from the date of purchase by the first consumer purchaser of the product unless otherwise provided for below.Batteries.  One (1) year from the date of purchase by the first consumer purchaser of the product unless otherwise provided for below.
Legal and Safety113Rechargeable Batteries will be replaced during the applicable warranty period if:•the battery capacity falls below 80% of rated capacity, or•the battery develops leakage.MOTOROLA, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Product shall become the property of MOTOROLA.This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product.MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment if expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole, or any portion of the system not produced by MOTOROLA, under this warranty.General Provisions:This warranty sets forth the full extent of MOTOROLA’S responsibilities regarding the Product, Repair, replacement or refund of the purchase price, at MOTOROLA’S options, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INLCUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW.How to Get Warranty Service:You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by MOTOROLA through one of its authorized warranty service locations. If you first contact the
114Legal and Safetycompany which sold you the Product (e.g., dealer or communication service provider), it can facilitate your obtaining warranty service.What This Warranty Does Not Cover:•Defects or damage resulting from use of the Product in other than its normal and customary manner.•Defects or damage from misuse, accident, water, or neglect.•Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment.•Breakage or damage to antennas unless caused directly by defects in material workmanship.•A Product subjected to unauthorized Product modifications, disassembles or repairs (including, without limitation, the audition to the Product of non-MOTOROLA supplied equipment).•Product which has had the serial number removed or made illegible.•Rechargeable batteries if:Any of the seals on the battery enclosure of cells are broken or show evidence of tampering.The damage or defect is caused by charging or using the battery in equipment or service other than the Product for which it is specified.•Freight costs to the repair depot.•A Product which, due to illegal or unauthorized alteration of the software/firmware in the Product, does not function in accordance with MOTOROLA’S published specifications or the local type acceptance labeling in effect for the Product at the time the Product was initially distributed from MOTOROLA.•Scratches or other cosmetic damage to Product surfaces that does not effect the operation of the Product.•Normal and customary wear and tear.•Exclusion for defects or damage arising from use of the products in connection with non-MOTOROLA equipment.Patent and Software Provisions:MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a patent, and Motorola will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:•That MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim;•That MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise; and
Legal and Safety115•Should the Product or parts become, or in MOTOROLA’S opinion be likely to become, the subject of a claim of infringement of a patent, that such purchaser will permit MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA.MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or sued in connection with the Product or any parts thereof. In no event shall MOTOROLA be liable for any incidental, special or consequential damages arising from any claim of patent infringement or alleged infringement.Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software, such as the exclusive rights to reproduce in copies and distribute copies of such MOTOROLA software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such MOTOROLA software or exercise or rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights.Hearing Aid Compatibility With Mobile PhonesSome Motorola phones are measured for compatibility with hearing aids. If the box for your particular model has “Rated for Hearing Aids” printed on it, the following explanation applies.When some mobile phones are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and phones also vary in the amount of interference they generate.The wireless telephone industry has developed ratings for some of their mobile phones, to assist hearing device users in finding phones that may be compatible with their hearing devices. Not all phones have been rated. Phones that are rated have the rating on their box or a label on the box.The ratings are not guarantees. Results will vary depending on the user’s hearing device and hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your
116Legal and Safetyhearing device is the best way to evaluate it for your personal needs.M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than phones that are not labeled. M4 is the better/higher of the two ratings.T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing device’s telecoil (“T Switch” or “Telephone Switch”) than unrated phones. T4 is the better/higher of the two ratings. (Note that not all hearing devices have telecoils in them.)Hearing devices may also be measured for immunity to this type of interference. Your hearing device manufacturer or hearing health professional may help you find results for your hearing device. The more immune your hearing aid is, the less likely you are to experience interference noise from mobile phones.Information From the World Health OrganizationPresent scientific information does not indicate the need for any special precautions for the use of mobile phones. If you are concerned, you may want to limit your own or your children’s RF exposure by limiting the length of calls or by using hands-free devices to keep mobile phones away from your head and body.Source: WHO Fact Sheet 193Further information: http://www.who.int./peh-emf.Product RegistrationOnline Product Registration:www.motorola.com/us/productregistrationProduct registration is an important step toward enjoying your new Motorola product. Registering permits us to contact you for product or software updates and allows you to subscribe to updates on new products or special promotions. Registration is not required for warranty coverage.Please retain your original dated sales receipt for your records. For warranty service of your Motorola Personal Communications Product you will need to provide a copy of your dated sales receipt to confirm warranty status.Thank you for choosing a Motorola product.Wireless: The New RecyclableYour wireless phone can be recycled. Recycling your phone reduces the amount of waste disposed in landfills and allows recycled materials to be incorporated into new products.The Cellular Telecommunications Industry Association (CTIA) and its members encourage consumers to recycle their phones and have taken steps to promote the collection and environmentally sound recycling of end-of-life devices.
Legal and Safety117As a phone user, you have an important role in ensuring that this device is recycled properly. When it comes time to give this phone up or trade it in for a new one, please remember that the phone, the charger, and many of its accessories can be recycled. It's easy. To learn more about CTIA's Recycling Program for Used Wireless Devices, please visit us at: http://recycling.motorola.young-america.com/ index.htmlCalifornia Perchlorate LabelSome mobile phones use an internal, permanent backup battery on the printed circuit board that may contain very small amounts of perchlorate. In such cases, California law requires the following label:Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.There is no special handling required by consumers.Patent and Trademark InformationMOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. © 2008 Motorola, Inc. All rights reserved.Microsoft and Microsoft Internet Explorer are registered trademarks of Microsoft Corporation. T9 is a trademark owned by Tegic Communications. T9® Text Input Patent and Trademark Information. This product is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other patents pending. Java and all other Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. All other product names or services mentioned in this manual are the property of their respective trademark owners. Software Copyright NoticeMotorola products may include copyrighted Motorola and third party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the Motorola products may not be modified, reverse-engineered, distributed, or reproduced in any manner to the extent allowed by law. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Motorola or any third party software provider, except for the normal, non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product.
118Legal and SafetyPrivacy and Data SecurityMotorola understands that privacy and data security are important to everyone. Because some features of your mobile device may affect your privacy or data security, please follow these recommendations to enhance protection of your information:• Monitor access—Keep your mobile device with you and do not leave it where others may have unmonitored access. Lock your device’s keypad where this feature is available.• Keep software up to date—If Motorola or a software/application vendor releases a patch or software fix for your mobile device that updates the device’s security, install it as soon as possible.• Erase before recycling—Delete personal information or data from your mobile device prior to disposing of it or turning it in for recycling. For instructions on how to delete all personal information from your device, please contact your local service provider.• Understanding AGPS—To provide location information for emergency calls, certain Motorola mobile devices incorporate Assisted Global Positioning System (AGPS) technology. AGPS technology also can be used in non-emergency applications to track and monitor a user’s location—for example, to provide driving directions. Users who prefer not to permit such tracking and monitoring should avoid using such applications.If you have further questions regarding how the use of your mobile device may impact your privacy or data security, please contact Motorola at privacy@motorola.com, or contact your service provider.Smart Practices While DrivingDrive Safe, Call Smart SMCheck the laws and regulations on the use of phones and their accessories in the areas where you drive. Always obey them. The use of these devices may be prohibited or restricted in certain areas—for example handsfree use only. Go to www.motorola.com/callsmart (in English only) for more information.Your mobile device lets you communicate by voice and  data—almost anywhere, anytime, wherever wireless service is available and safe conditions allow. When driving a car, driving is your first responsibility. If you choose to use your phone while driving, remember the following tips:• Get to know your Motorola mobile device and its features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.•When available, use a handsfree device. If possible, add an additional layer of convenience to your phone with
Legal and Safety119one of the many Motorola Original handsfree accessories available today.• Position your mobile device within easy reach. Be able to access your phone without removing your eyes from the road. If you receive an incoming call at an inconvenient time, if possible, let your voice mail answer it for you.• Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous.• Do not take notes or look up phone numbers while driving. Jotting down a “to do” list or going through your address book takes attention away from your primary responsibility, driving safely.• Dial sensibly and assess the traffic; if possible, place calls when your car is not moving or before pulling into traffic. If you must make a call while moving, dial only a few numbers, check the road and your mirrors, then continue.• Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that can divert your attention away from the road.• Use your mobile device to call for help. Dial 911 or other local emergency number in the case of fire, traffic accident, or medical emergencies (wherever wireless phone service is available).• Use your mobile device to help others in emergencies. If you see an auto accident, crime in progress, or other serious emergency where lives are in danger, call 911 or other local emergency number (wherever wireless phone service is available), as you would want others to do for you.• Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number (wherever wireless phone service is available).
120indexindexAaccessories  9active phone line  38advanced calling  153-way calls  15call waiting  15alertset  42, 97turn off  42, 80answer a call  15auto replies  27Bbacklight  98battery charging  14battery indicator  38battery installation  12Bluetooth  76connect  76send information  78setting your phone  76turning on or off  76Ccallanswer  15any key answer  15end  15make  15call forward  81caller ID  81callsSDG, see SDG callscamcorder  48camera  48, 59, 62media center  62, 65self-timer  62carousel menu  38center key  43center select key  9contacts  99edit/delete  18set picture ID  18set ringer ID  18Ddatebook  99create events  99receive events via PTT  99setup  100view reminders  99dial a phone number  15
121indexdialed calls  80direct launch  95display  37draftssee also text messages, drafts  24Eearpiece volume  42emergency number  83end a call  15end key  15Ffrequently asked questionsservice and repairs  108GGPS enabledemergency calls  83GPS PINenable GPS PIN  46GPS, see GPS enabledHhandsfree speaker  43hearing aid  44Hearing Aid Compatibility  115home screen  37Iimagesediting  60menu  60my images  60slideshow  60viewing  61international calls  83Llock keypad  47low battery message  38Mmain menu  38make a call  15media center  48memory card  10insert  11remove  11message centertext messages  25message indicator  38messaging  19modemusing your handset as a  36MOTOtalkcalls, ending  94channels  90
122indexchannels, setting  91code calls, making  91code calls, receiving  92codes  90codes, setting  91direct launch  95emergency calls  94private MOTOtalk calls  93private only setting  93receiving all calls  92setup options  95state tone  96switching to  90switching to network mode  90talk range  90multimedia  48my images  48, 60my music  48, 52my videos  48, 61Nnavigation key  9, 43Oone touch PTT  74optional accessory  9optional feature  9Ppacket data  38phone number  19power key  2private callsanswer  16call alerts  16make  16receive a call alert  17PT Manager  75PTX features  66Rradio frequency  102received calls  80recent calls  80recycling  116redial  81ring style indicator  38ring style, setting  42ring tones  48off  97setting  97vibrate  97, 98ringer volume  42Ssafetyradio frequency  102RF energy interference  103safety information  102safety tips  118
123indexSDG callslists, adding numbers  86lists, creating  85lists, deleting  86lists, remove members  86lists, save entries  75make call  87starting  87security  46Selective Dynamic Group Calls, see SDG callssend key  15signal strength indicator  37SIM card  10change SIM PIN  46enable SIM PIN  46soft keys  37speaker  38speed dial  84state tone  96store your number  19Ttext entry  39alpha method  41word method  40text messages  19, 36creating  19deleting  30drafts  24memory  31message center  25receiving  24resend messages  30sending  19sent messages  30Vvideosmy videos  61viewing  61voice names  82voicemail  84message indicator  84receiving  84setting up  84voicerecord  48volume  42Wwallpaper  98WHO information  116Yyour phone number  19
www.motorola.comNNTN7747A@NNTN7774A@xxxxxxxx xx xx APR/09Printed in USA

Navigation menu