Motorola Mobility T56GX1 Portable WCDMA Transceiver with Bluetooth User Manual Scorpius E
Motorola Mobility LLC Portable WCDMA Transceiver with Bluetooth Scorpius E
UserManual.wiki
>
Motorola Mobility
>
T56GX1 User Manual
>
Exhibit 8B Users Manual
Contents
1.
Exhibit 8A Users Manual
2.
Exhibit 8B Users Manual
3.
Exhibit 8C Users Manual
4.
Exhibit 8D Users Manual
5.
Exhibit 8E Users Manual
6.
Exhibit 8F Users Manual
Exhibit 8B Users Manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![49Before Using the Handset XXXXX■When the "UIM PIN" is set to "On"After the Wake-up screen, the Enter UIM PIN (P121) screen opens.■When "Phone Lock" is set to "Automatic Lock" (Checking the specifications)After the Wake-up screen, the Unlock code (P120) entry screen opens.Enter the Unlock Code and press h [OK] to display the Stand-by display.■When "Prompt At Power Up" of "Self Mode" is set to "On"After the Wake-up screen opens, a confirmation of whether to set Self mode appears. Press h [Yes] to set Self mode, then the Wallpaper screen opens. (Checking the specifications)■If $★$ appears at the top of the screenYou are out of the service area or where there are no signals received. Move to a location where the icon shows signal reception. The signal strength is indicated in 5 levels as follows: $★$ →$★$ →$★$ →$★$ →$★$Turning the Power Offap (for 2+ seconds)The Exit screen opens and power goes off.LanguageSwitching the Display Language to EnglishYou can switch the language of the displayed function names or messages (specific to the FOMA handset) between Japanese and English.ac y $★$ (Settings) y "General Settings" y "Language"Automatic : In accord with the setting saved on the UIM. (Checking the specifications)日本語 (Japanese) : Changes to Japanese.English : Changes to English.bSelect an option y h [Select]• When the UIM is inserted, the settings of this function are recorded on the UIM.(Checking the specifications)■To switch the display language from English to Japanesec y $★$ (Settings) y "General Settings" y "Language" y "日本語 (Japanese)" y h[Select]Default AutomaticStrong Weak](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-1.png)
![50XXXXXBefore Using the HandsetTime and DateSetting Date and TimeYou can change the time zone or the date format. Also, you can set to update the time automatically.acy $★$ (Settings) y "General Settings" y "Time and Date"bPerform the following operationshh:mmSet the time and format manually.ya to enter the time yj to select the format yh [OK]Time ZoneSelect a time zone yh [Select] yh [Yes]mm/dd/yySet the date. Data of the range from 1998/01/01 to 2097/12/31 can be set.ya to enter year, month, and day yh [OK]Date FormatSet the format for the date.y"12/31/99" or "31-DEC-99"Auto UpdateSet whether to update the time on the FOMA handset based on the time information from the DoCoMo network.• The date or time can also be entered using dial keys.• The following functions are not available unless you set the time and date: (Checking the specifications)- Time and date display for entries in call logs - Calendar/Task- Alarms - "Calendar" on "Wallpaper"- Software Update - World Clock- i-appli Auto Start - i-appli DX Start- SSL Session (Authentication)• Time may not be updated depending on the signal reception.• Update will not be performed if the UIM is not inserted.• An error of a few seconds may occur.Default Time: 24hr Time Zone: Tokyo (GMT+9: 0) Date Format: 12/31/99Auto Update: ON (Time & Time zone)ON (Time & Time zone)ON (Time Only)Off: The date and time are updated automatically (If you move to a different time zone, the time zone is also adjusted automatically). Press h [Yes]. (Checking the specifications): The date and time are updated automatically (Time zone is not updated). (Checking the specifications): Auto update will not be performed.Auto Update](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-2.png)
![51Before Using the Handset XXXXXCaller ID NotificationSending Caller IDYou can set to show/hide your Caller ID to the network in advance.• Your Caller ID (phone number) is valuable information. Be cautious about sending your Caller ID.• Caller ID notification cannot be set when $★$ is displayed.acy $★$ (Network Services) y "Caller ID Notification" y Perform the following operationsChange Notification SettingSet to show/hide Caller ID.y "Show Caller ID"/"Hide Caller ID" y Enter the network security code Status RequestYou can check the setting of the Caller ID.• Your Caller ID is only displayed if the other party's phone is capable of displaying it.• You can set to show/hide your Caller ID for each dialed call. →P58• If you hear the Caller ID Display Request service voice prompt, make a call again sending the Caller ID.Viewing Your Own NumberYou can view your own phone number (My Number) saved in the UIM.acy0If your name is saved, the name also appears.■To view the saved detailed informationPress h [Function] and select "Display All Information", then enter the security code.• You can save your name or Email address under "My Personal Info". →P232My Personal Info screen](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-3.png)
![54XXXXXMaking/Answering CallsMaking CallsaEnter a phone number• Enter up to 80 digits. If you enter more than 27 digits, only the last 26 digits are displayed.• Start from the area code even for a local call.•i [Register] : Go to Step 2 (P95) in "Saving Contacts to Phonebook from Received Calls or Dialed Calls".■To make a call to a general phoneArea Code − City Code − Phone Number■To make a call to a mobile phone090−XXXX−XXXX/080−XXXX−XXXX■To make a call to a PHS070−XXXX−XXXXbo/cStart talking when the other party answers.•i [Swap]: Calls up another function such as Phonebook. →P226•0 to 9: Sends push signals (DTMF).cp to terminate the call• If you hear the Caller ID Display Request service voice prompt, make a call again sending the Caller ID.■To correct an entered phone numberTo delete an entered digit, use a to move the cursor to the right of the digit and press C.To add a digit, use a to move the cursor to the position and enter the digit with the dial keys.■Screen display during dialingThe other party's name appears if the party is saved in the Phonebook. However, when a call is made to a party that has been saved as secret by setting "Secret Data" to "Hide", the phone number is displayed. (Checking the specifications)The Function Menu on the Phone Number Entry ScreenaPhone number entry screen (P54) yh [Function] y Perform the following operationsAttach NumberEnter the phone number referring to the phonebook or Dialed/Received Calls.InsertEnters "p", "w", or "n" at the cursor location. →P59Caller IDMakes a call after setting to show/hide the Caller ID. →P58PhonebookDialed CallsReceived Calls: Select the phonebook entry and press h [Select].: Select a history and press h [Select].: Select a history and press h [Select].Phone number entry screenTalking screen](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-6.png)
![55Making/Answering Calls XXXXXVideo CallMakes a video call to the entered phone number.Send MessageThe entered phone number becomes the destination.Compose and send a mail. →P172Multi NumberSelect a number to use for Caller ID when making calls. →P251Add Intl Access No.Adds an international access number at the beginning of the entered phone number. →P61Add Country CodeAdds a country code at the beginning of the entered phone number. →P270Insert(Checking the specifications)Editing FunctionUses the edit functions. →P261Cancel EntryCancels storing. (Checking the specifications)• Selecting "New Call" from the function menu during a call will bring up the phone number entry screen with "Browse" displayed. (Checking the specifications)• Selecting "New Call" from the function menu during a call to make a video call, will display a confirmation whether to dial after disconnecting the current call. Pressing h [Yes] terminates the current call and makes a video call to the newly dialed phone number.The Function Menu on the Talking ScreenaTalking screen (P54) yh [Function] y Perform the following operationsMuteTurns off the sound.UnmuteCancels Mute.Spkrphone OnSwitches the sound source to the speaker to perform a Handsfree call.Spkrphone OffCancels the Handsfree call.My Personal InfoDisplays your phone number.HoldPlaces the call on hold.Use Bluetooth• Searches and connects to a registered Bluetooth headset, etc. (Checking the specifications)New CallPlaces the active call on hold and makes another call. →P248Attach NumberVideo CallContinued on the next page](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-7.png)
![57Making/Answering Calls XXXXX■Icons on the Dialed Calls list (Checking the specifications)The following icons indicate types of calls: $★$: Voice Call $★$: Video Call $★$: Dialed Call $★$: Missed Dialed Call $★$: Number1 $★$: Number2• Dialed calls made to parties saved in the Phonebook have icons saved under "Type".The Function Menu on the Dialed Calls List and Dialed Calls Detail ScreenaDialed Calls list (P56)/Dialed Calls detail screen (P56) yh [Function] y Perform the following operationsStoreSave a phone number from a call log to the Phonebook. Go to Step 2 (P95) in "Saving Contacts to Phonebook from Received Calls or Dialed Calls".Video CallMakes a video call to the phone number in the history.DeleteDeletes the selected/displayed entry.yh [Yes]Delete AllDeletes all entries from the Dialed Calls.yh [Yes]Caller IDSets to show/hide the Caller ID.y "Show ID"/"Hide ID"Send MessageCreates and sends a new mail with the phone number in the Dialed Calls. →P172Add DigitsThe phone number entry screen opens with the phone number in the history entered. Go to Step 2 in "Making a Call" (P54).Attach NumberMulti NumberSelect a number and make a call. →P251Copy All TextCopies all text on the Dialed Calls detail screen.Calling the Last Dialed NumberYou can open the phone number entry screen with the last dialed number entered to make a call easily.acy $★$ (Accessories) y "Recent Calls" y "Notepad"The phone number entry screen opens with the phone number entered.bo/c• Press c to make a call in the same way (voice/video call) as before.PhonebookDialed CallsReceived Calls: Opens the Phonebook list.: Opens the Dialed Calls list.: Opens the Received Calls list.Continued on the next page](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-9.png)
![58XXXXXMaking/Answering Calls■To make a video callPress t.Auto RedialRedialing AutomaticallyYou can set the handset to redial automatically when a call was not connected due to a busy line, etc. (Checking the specifications)acy $★$ (Settings) y "General Settings" y "Auto Redial" y "On"/"Off"186/184Showing/Hiding Caller ID for Each CallThere are 2 ways to show/hide Caller ID for each call: adding "184"/"186", or using the function menu on the phone number entry screen.Showing/Hiding Caller ID by Adding 184/186aEnter "184"/"186" y enter the phone number■To show Caller IDEnter "186" before the phone number.■To hide Caller IDEnter "184" before the phone number.bo/c■To make a video callPress t. Showing/Hiding Caller ID Using the Function MenuaEnter the phone number yh [Function] y "Caller ID" y "Show ID"/"Hide ID"bo/c■To make a video callPress t.• The same operation is available from the Phonebook, Dialed Calls or Received Calls lists/detail screens.• You can set to show/hide Caller ID to the network in advance. →P51• You can set to Show/Hide Caller ID for each Contact. →P128Default Off (Checking the specifications)](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-10.png)
![59Making/Answering Calls XXXXXShowing/Hiding Caller ID for the Next CallYou can set to show/hide the Caller ID for the next call in advance. (Checking the specifications)acy $★$ (Settings) y "In-Call Setup" y "Caller ID Notification" y "Next Call Only" y "Show"/"Hide"Sending Push Signals QuicklyEnter "p"/"w"/"n" and a number after the phone number to send number after the alphabetic character as push signals (DTMF).• Signals may not be received depending on the device on the receiving side.Entering "p"A call can be made with a "p" and a number after the phone number. After the number before "p" is connected, the number after "p" is sent in DTMF about three seconds later. This function is convenient for dialing an extension after a phone number is connected.aEnter a phone number y h [Function] y "Insert" y "Pause" y enter a number to send y o/cAfter the call is connected, the number after "p" is sent automatically.Entering "w"A call can be made entering a "w" and a number after the phone number. When the number before "w" is connected, the number after "w" is keyed in waiting to be sent in DTMF. This function is convenient for sending a message to a pager, reserving tickets, or checking the balance of your bank account over the phone.aEnter a phone number y h [Function] y "Insert" y "Wait" y Enter a number to send y o/cb h [OK]The number after "w" is sent.Entering "n"You can make a call entering "n" after a phone number and entering a number to be sent instead of "n". After the number before "n" is connected, the number entered for "n" is sent in DTMF. This function is convenient to make an international credit card call that is connected using the access number and then requires a credit card number, PIN number or a phone number.*: From January, 2001, the DoCoMo pager service changed its name to QUICKCAST.Continued on the next page](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-11.png)
![60XXXXXMaking/Answering CallsaEnter a phone number y h [Function] y "Insert" y "n" y Enter a number to send y o/cThe entry screen of the number to be sent instead of "n" is displayed.bEnter "n" value y i [OK]When the call is connected, the entered number is sent instead of "n".WORLD CALLMaking International CallsWORLD CALL is an international calling service available from a DoCoMo mobile phone.FOMA service subscribers are also signed up for WORLD CALL at the time of initial subscription (except subscribers explicitly declining this service).• You can make calls to about 220 countries and regions around the world.• Charges for "WORLD CALL" are added to the monthly FOMA service call charges.• No initial fee and no fixed monthly charges apply.• This service is not available with some billing plans.• For details on WORLD CALL, contact the "DoCoMo Information Center" on the back of this manual.• When using international carriers other than DoCoMo, contact the prospective carrier directly.Changes to the International Call Dialing ProcedureThe "MY LINE" service is not applicable to mobile phone communications, including WORLD CALL service. Along with the introduction of the "MY LINE" service, the dialing procedure for international communications using a mobile phone has been changed. Consequently, the previous dialing procedure (Step 1 in "Making an International Call" (P37) without the prefix "010") can no longer be used.Making an International Call by Entering a Phone NumberEnter the phone number in the following format: aEnter "009130-010-Country Code-Area Code (City Code)-Phone Number"• Exclude the leading "0" (zero) from the area code (city code) (in some countries or regions such as Italy, the leading "0" may be required)bo/c■To make a video callPress t.An "International Video Call" to an overseas party with a specific 3G mobile phone can be made by pressing t after the following dialing procedures.• For information about the countries where connection can be made and telecommunications carriers, refer to the DoCoMo's Web site.• For details, contact the "DoCoMo Information Center" on the back of this manual.](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-12.png)
![61Making/Answering Calls XXXXXMaking an International Call Using "+"Enter "+" at the beginning of a phone number and dial to replace "+" with an international access code automatically. Press 0 for 1+ seconds to enter "+".• Set "Auto-Assist Settings" of "International Access Code" to "On" before making a call. →P62• The automatically added International Access Code is set to WORLD CALL (009130010) by default. →P62a0 (for 1+ seconds) y Enter "Country Code - Area Code (City Code) - Phone Number"• Exclude the leading "0" (zero) from the area code (city code) (in some countries or regions such as Italy, the leading "0" may be required).bo/cThe confirmation to dial is displayed.• The phone number with the International Access Code added is displayed on the confirmation to dial screen.■To make a video callPress t.ch [Yes]• This option is available only inside the FOMA network service area.• If the phone number has "+81" as its prefix, "+" will not be converted into the International Access Code.Making an International Call Using a Function MenuYou can select an international access code from the function menu and add it to the phone number.aEnter "Country Code - Area Code (City Code) - Phone Number"• Exclude the leading "0" (zero) from the area code (city code) (in some countries or regions such as Italy, the leading "0" may be required).bh [Function] y "Add International Access No." y Select a number yh [Select]The international access code is added at the beginning of the phone number.co/c■To make a video callPress t.• WORLD CALL is set as the international access code by default. International access codes can be added. →P62](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-13.png)
![62XXXXXMaking/Answering CallsMaking an International Call EasilySetting to Add the International Access Code AutomaticallyYou can set whether to add an international access code automatically instead of "+" when you make a call by entering "+" at the beginning of the phone number. Also, you can specify the international access code to be added automatically.acy $★$ (Settings) y "In-Call Setup" y "Intl Dial Settings" y "Intl Access Code" y "Auto-Assist Settings" y Perform the following operationsAuto Assisty"On"/"Off"Access Codey Select an International access code yh [Select]• You can save international access codes under "IDD Prefix Settings".International Call SettingStoring International Access CodesUp to three international access codes can be stored.acy $★$ (Settings) y "In-Call Setup" y "Intl Dial Settings" y "Intl Access Code" y "IDD Prefix Settings"•c: View the stored international access codes.b"[New Entry]" y Perform the following operationsNameSave the name of the international access code. Up to XX full-pitch or XX half-pitch characters can be entered.y Enter the name yi [OK]Access CodeUp to XX digits can be entered.y Enter the access code yi [OK]ch [Complete]Default Auto Assist: Off Access Code: World Call (0091300101)Access CodeIDD Prefix Settings screen](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-14.png)
![63Making/Answering Calls XXXXX• The following operations are available by pressing h [Function] on the name entry screen/access number entry screen:- Select "Editing Function" to edit text. →P261- Select "Cancel Entry" to cancel saving.The Function Menu on the IDD Prefix Settings Screen• The function menu is available only while a saved international access code is selected.aIDD Prefix Settings screen (P62) yh [Function] y Perform the following operationsEditYou can correct the selected international access code. Go to Step 2 of "Storing International Access Code" (P62). DeleteThe selected international access code will be deleted.NewGo to Step 2 of "Storing International Access Code" (P62).• The pre-installed "World Call" number can also be edited.• The international access number set as Auto-Assist cannot be deleted.Sub AddressMaking a Call by Specifying a Sub AddressYou can set whether digits after "*" of a phone number with "*" inserted are identified as a sub-address. A sub-address is used to call up a specific device connected to an ISDN line or to select contents on "V live".acy $★$ (Settings) y "In-Call Setup" y "Sub Address" y "On"/"Off"• "*" is not identified as a delimiter of a sub-address if: (Checking the specifications)- "*" is entered at the beginning of the phone number- A specific number such as "184" or "186" is entered at the beginning of the phone number- "*" is entered right after "p" or "w"EditDeleteDefault (Checking the specifications)](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-15.png)
![64XXXXXMaking/Answering CallsIn-Call TimerWarning with Display and Alarm when a Set Period Elapses during a CallYou can set to warn by displaying information about a call on the screen and sounding an alarm if the set period of time elapses during the call. (Checking the specifications)acy (Settings) y "In-Call Setup" y "In-Call Timer" y Perform the following operationsDisplayBeepEnter an interval between Beeps of the range from 1 second to 999 seconds.y "60 Seconds"/"Off" y Enter Beep interval yi [OK]• The alarm setting completes if you select "Off".• The following operations are available by pressing h [Function] on the alarm interval entry screen:- Select "Editing Function" to edit text. →P261- Select "Cancel Entry" to cancel saving.• If "Credit Available" is set, it is impossible to make a call and the counter is reset when exceeding the "Credit Limit".Talking Using HandsfreeYou can set to hear the other party's voice from the speaker.aTalking screen (P54) yh [Function] y "Spkrphone On"■To cancel a handsfree talkingPress h [Function] and select "Spkrphone Off". (Checking the specifications)• Keep a distance of at least XX cm between the handset and your ear during a Handsfree call.• To operate during a video call →P83In-Car HandsfreeTalking in a Car, Hands Free Connecting the handset to a handsfree device, such as an in-car handsfree kit 01 (optional) or a car navigation system, allows you to make or receive a voice call from a handsfree device. Default Display: Off Beep: OffTimeCredit AvailableOff: Shows the duration of the call.: Shows the available remaining amount to the amount set under "Credit Limit".: Nothing is displayed.Display](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-16.png)
![65Making/Answering Calls XXXXXFor operations of a handsfree device, refer to the user manual of the device. To use an in-car handsfree kit 01 (optional) via USB, a FOMA in-car handsfree cable 01 (optional) is necessary.• If you connect the handset with a Bluetooth handsfree device via a Bluetooth connection, register the device before connecting.• To use a handsfree device via USB connection, set "USB Mode Settings" to "Data Connection".• Screen display for incoming or a ringtone are in accord with the settings on the handset.• When you switch to handsfree, a ringtone sounds from the handsfree device even if Manner Mode is set or "Ring Volume" is set to "0" for the handset.• The incoming call actions with Public Mode (Drive Mode) activated is in accord with Public Mode (Drive Mode) settings.• The ring actions with Answering Machine activated is in accord with the "Record Message" settings.• Folding the handset during a call does not affect the call. (Checking the specifications)Talking via BluetoothYou can talk connecting the handset to a commercially available Bluetooth device such as a Bluetooth headset.• Register the Bluetooth device before connecting it to the handset. →P239• For operations of a Bluetooth device, refer to the user manual of the device.aMake/Receive a Call using a Bluetooth device•$★$ appears when the handset is connected to a Bluetooth device.■To switch to a Bluetooth device during a call(Checking the specifications)Receiving a CallaA call arrivesThe ringtone sounds and the incoming call lamp blinks.•NM: Stops the ringtone or vibration.bo/i [Answer]Answer the call.cp to terminate the call■Display of the Incoming call screen (with Caller ID)If the caller is saved in the Phonebook, the name and phone number are displayed. If an image is saved in the Phonebook, the specified image is displayed. (Checking the specifications)• If an image is saved for a group, the image for the group takes precedence to be displayed. (Checking the specifications)• When the "Secret Data" is set to "Hide", "Private ID" is displayed when a call arrives from a caller saved as secret in the Phonebook.Incoming call screenTo be insertedContinued on the next page](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-17.png)
![66XXXXXMaking/Answering Calls• If a call arrives to an additional number of Multi Number, the ringtone set in "Multi Number" sounds and the following icon appears on the incoming screen: $★$/$★$: Incoming voice call$★$/$★$: Incoming video call$★$/$★$: Incoming data■Display on the Incoming call screen (without Caller ID)The reason for no Caller ID is displayed instead of a phone number. →P127• The incoming call actions such as a ringtone, vibration or screen display vary depending on the settings in "Style". →P106, P108• When Manner Mode is set, the ringtone does not sound. When Public Mode (Drive Mode) is set, the ringtone does not sound and the incoming call lamp does not blink.• When "Multi-key" is set, you can answer the call by pressing a key other than the key in Step 2.• When "Open to Answer" is set, you can answer a call by opening the handset.• If you subscribe to the Voicemail, Call Waiting or Call Forwarding service, when "Incoming Call Mgmt" is set to "Answer Call" and "Incoming Call Setting" is enabled, a busy tone during a call sounds if a call arrives during another call, If a busy tone during a call sounds, each service is available. →P251• You can set "Ring Delay" to delay the incoming call action for a call made from a party not saved in the Phonebook.• Use the following functions to reject incoming calls from a caller not saved in Contacts/specific caller.- Set "Not in Phonebook" to "Reject".- Set "Reject Calls" of Phonebook to "Yes".The Function Menu on the Incoming Call ScreenaIncoming call screen (P65) yh [Function] y Perform the following operationsAnswerAnswer the ringing call.End Active Call & AnswerTerminate an active voice call to answer a ringing call.End Held Call & Answer Terminates a call on answer hold to answer another call. (Checking the specifications)Reject CallReject an incoming call and hang up.Response HoldPlaces the call on hold.VoicemailConnects a call to the Voicemail center.Call ForwardingTransfers an incoming call to the specified number.• This option is not available unless you subscribe to the Voicemail service.• This option is not available unless you subscribe to the Call Forwarding service and you specify a forwarding destination.VoicemailCall Forwarding](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-18.png)
![67Making/Answering Calls XXXXXMulti-keyAnswering a Call by Pressing a Dial KeyYou can set to answer a voice call by pressing a key other than i [Answer], o, J (for 1+ seconds). (Checking the specifications)acy $★$ (Settings) y "In-Call Setup" y "Answer Function" y "Multi-key" y "On"/"Off"• After setting, the following keys can be used to answer a call.t, m, 0 to 9, *, #, c, C• This function is not available when a video call arrives.Open to AnswerAnswering a Call by Opening the HandsetYou can set to answer a voice or video call by simply opening the handset when a call arrives while the handset is folded.acy $★$ (Settings) y "In-Call Setup" y "Answer Function" y "Open to Answer" y "On"/"Off"• When "Open to Answer" is set, answer hold operations or function menu of the incoming call screen are unavailable.Received CallsUsing Received CallsUp to 20 incoming voice or video call entries are saved in Received Calls. A phone number, received date and time, ringing duration, and show/hide Caller ID are saved in the entries.• If there are more than 20 entries, the oldest entries will be overwritten first.• Receiving a call from the same phone number overwrites the entry of the latest received date and time.aly "Received Calls"• The caller's name appears if the caller is saved in the Phonebook.Default OnDefault OnReceived Calls listContinued on the next page](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-19.png)
![69Making/Answering Calls XXXXXAdjusting the Ringtone VolumeThe ringtone volume can be adjusted in 8 levels from 0 to 7.• The default settings vary depending on the settings of "Style".aN/M• When the volume is set to "1", pressing M sets "Vibrate" and pressing M again sets "Silent".• You can also set the ringtone volume using "Detail" under "Sound Profiles".• The ringtone volume cannot be adjusted when Manner Mode is set.• The set volume is used for incoming calls, incoming mails, Voicemail calls, Calendar alarms, incoming data, and Reminders. (Checking the specifications)Power SettingSaving Power Consumption during a Call (Checking the specifications)acy $★$ (Settings) y "General Settings" y "Battery Save" y "On"/"Off"Placing a Call on Hold When You Cannot Answer the CallaIncoming call screen (P65) ypThe call is placed on answer hold. The caller hears the hold tone set in "Response Hold Tone" under "Call Hold".bo when you can answer the call■Video callsPress o/t to send a camera image to the other party. Press i [Use Image] to send the image set in "Alternate image"/Chara-den to the other party.■To terminate a callPress p.• The caller is charged even during an answer hold.• When the handset is folded and "Open to Answer" is set, answer hold is not available.Default 7Default OnResponse Hold screenScreen to be insertedContinued on the next page](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-21.png)
![70XXXXXMaking/Answering Calls• If you subscribe to the Voicemail service/Call Forwarding service, you can connect the incoming call to the Voicemail Center or forward the incoming call to the specified phone number. →P66, P84Response Hold ToneSetting the Response Hold ToneYou can set the response hold tone to Japanese/English. You can also record and set a personal answer hold tone.Specifying a Response Hold Toneacy$★$ (Settings) y "In-Call Setup" y "Call Hold" y "Response Hold Tone"Japanese : The response hold tone is set to Japanese.English : The response hold tone is set to English.Personal : The response hold tone is set to Recorded data.bSelect a hold tone yc• If an Answer Hold Tone has not been recorded, "Personal" is displayed as "New".■Response Hold ToneAn Response hold tone is played as follows: JapaneseI cannot take your call now. Please wait or call again later.EnglishI cannot take your call now. Please hold the line for a moment or call me back later. Thank you.Recording Response Hold ToneaResponse Hold Tone screen (P70) y Select "New" yh [Record]Start recording. After recording finishes, the Response Hold Tone screen returns.• After recording completes, "New" is changed to "Personal".• For recording, see "Recording Voice Notes" (P218).Default JapanesePersonalResponse Hold Tone screen](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-22.png)
![71Making/Answering Calls XXXXXThe Function Menu on the Response Hold Tone ScreenaResponse Hold Tone screen (P70) yh [Function] y Perform the following operationsSet as DefaultSets the selected item as the response hold tone.PlayPlays the selected item.RerecordRecords the data again.yh [Yes] y RecordDeleteDeletes the recorded data.Placing a Call on HoldaTalking screen (P54) yh [Function] y "Hold"The call is placed on hold. The hold tone set in "Answer Hold" under "Call Hold" is played to the caller.■Video callsThe hold tone and image set in "Videocall Hold" under "Call Hold" are sent to the caller.bo when you can answer the call (Checking the specifications)■Video callsPress o/t to send a camera image to the other party. Press i [Use Image] to send the image set in "Alternate Image"/Chara-den to the other party. (Checking the specifications)■To terminate a callPress p.Answer HoldSetting the Answer Hold Tone and ImageYou can set a hold tone and an image that is displayed on your handset and the other party's while a call is on hold. (Checking the specifications)acy $★$ (Settings) y "In-Call Setup" y "Call Hold" y"Answer Hold" y Perform the following operationsAnswer Hold ToneAnswer Hold Imagey Select a folder ycy Select an image ycDefault Answer Hold Tone: Japanese Answer Hold Image: (Checking the specifications)JapaneseEnglish: The answer hold tone is set to Japanese.: The answer hold tone is set to English.Continued on the next page](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-23.png)
![74XXXXXMaking/Answering CallsIncoming Call Actions When a Network Service and Public Mode (Power Off) are SetActions performed when Public Mode and a Network Service are set concurrently. *: If the ring time for a Network Service is set to 0 (zero) seconds, the Public Mode (Power Off) voice prompt is not played, and the call is not recorded in Received Calls.Checking Missed CallsIf you could not answer a call, the Missed call notification screen is displayed on the wallpaper screen. From the Missed call notification screen, you can check the caller.aAn incoming call terminatesThe number of missed calls is displayed.•i [Exit]: The Missed call notification screen is closed.bh [View]The Received list screen opens. $★$ appears for a Missed Call.cSelect a missed call entry ycThe Received Calls list detail screen opens.Service Incoming Actions for a Voice Call Incoming Actions for a Video CallVoicemail service After the Public Mode (Power Off) voice prompt is played, the call is connected to the Voicemail Center.*The Public Mode (Power Off) voice prompt is not played, and the call is connected to the Voicemail Center.Call Forwarding service After the Public Mode (Power Off) voice prompt is played, the call is connected to the forwarding destination.*Whether the Public Mode voice prompt is played is according to the settings of Call Forwarding service voice prompt option.The Public Mode (Power Off) image prompt does not appear, and the call is forwarded to the forwarding destination.If the forwarding destination cannot handle video calls, the call is terminated.Nuisance Call Barring serviceIf the caller is saved to reject a nuisance call, the reject call voice prompt is played and the call is terminated.In a case other than the above, the Public Mode (Power Off) voice prompt is played and the call is terminated.If the caller is saved to reject a nuisance call, a message indicating that the call was not connected and the call is terminated.In a case other than the above, the Public Mode (Power Off) image prompt is shown and the call is terminated.Caller ID Display Request serviceIf the caller does not send the Caller ID, the Caller ID display request voice prompt is played and the call is terminated.If the caller sends the Caller ID, the Public Mode (Power Off) voice prompt is played and the call is terminated.If the caller does not send the Caller ID, the Caller ID display request voice prompt is played and the call is terminated.If the caller sends the Caller ID, the Public Mode (Power Off) image prompt is shown and the call is terminated.Missed call notification screen](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-26.png)
![75Making/Answering Calls XXXXX• After checking a missed call, the notification screen will not open.• When "Show in Call Logs" is set to "No", the Missed call notification screen for a call that is hung up within the time set in "Ring Delay" is not displayed.Answering MachineRecording of Voice/Video-clip Message from a Caller when You Cannot Answer a CallEven if you do not subscribe to the Voicemail service, a response message indicating that you cannot answer the call can be played, and your handset can record the voice/image message.Setting the Answering Machineacy $★$ (Accessories) y "Record Message" yh [Function] y "Setting"bPerform the following operationsRecord MessageActivate/deactivate the Answering Machine.y"On"/"Off"Response TimeSet the duration of time from when the call arrives until Answering Machine launches. Enter between XX - XX seconds.Use j to enter the time yh [OK]Record TimeSet the recording time for the Answering Machine.Select a recording time yh [Select]Response GreetingResponse ImageDefaultRecord Message: Off Response Time: 8Sec Record Time: 30SecResponse Greeting: Japanese Response Image: JapaneseJapaneseEnglishPersonal: The message language is set to Japanese.: The message language is set to English.: The message is set as Recorded data.JapaneseEnglish: The Response image is set to Japanese.: The Response image is set to English.Settings screenContinued on the next page](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-27.png)
![76XXXXXMaking/Answering Calls•$★$ appears at the top of the screen when the Answering Machine is set.• The time also can be entered using dial keys.• If the Response time is set longer than the ring time of the Voicemail/Call Forwarding service, the setting for the service takes precedence.• If the Response time is set shorter than the set "Ring Delay", Answering Machine launches without the ring action.• If the Response Greeting has not been recorded, "Personal" is displayed as "New".• If recorded data is deleted, the Response Greeting reverts to "Japanese". (Checking the specifications)• The following operations are available by pressing h [Function] on the Response image list:- Select "Set as Default" to set the selected item as the Response image.- Select "Preview" to view the selected response image.Response GreetingRecording a Response GreetingaSettings screen (P75) y "Response Greeting"bSelect "New" yc• After recording completes, "New" is changed to "Personal".• For recording, see "Recording Voice Notes" (P218).The Function Menu on Greeting ListaGreeting List screen (P76) yh [Function] y Perform the following operationsSet as DefaultSets the selected item as the Response Greeting.PlayPlays the selected Response Greeting.EditRecords the greeting again.DeleteDeletes the recorded greeting.yh [Yes]Response TimeResponse GreetingResponse ImageGreeting List](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-28.png)
![77Making/Answering Calls XXXXXWhen Record Message is ActivatedThe caller's voice is recorded for a voice call, and the caller's image for a video call.aA call arrives y the Response Message is playedThe Response Message is played after the set response time elapses. The Response Image is also sent for a video call.•h [Answer]: Stop the Response Greeting and answer the call.•i [Disconnect]: Disconnect the call.bRecording startsThe other party's voice in recording hears from the earpiece.•h [Answer]: Stop recording and answer the call.•i [Disconnect]: Disconnect the call.cRecording completes•h [Play]: Play the Answering Machine message.■If more than one message/video clip is recorded in the Answering MachineThe number of recordings is displayed on the New Message notification screen. Press [View] to display the Recorded message list.• The number of messages that can be recorded varies depending on the available memory space. You can check the available memory space for recording messages. →P78• The Answering Machine is not available when $★$ is displayed, the handset power is turned off, or Public Mode (Drive Mode) is set.Playing/Deleting Record MessagePlaying Record Messageacy $★$ (Accessories) y "Record Message"• The caller's name appears if a caller saved in the Phonebook recorded a message. (Checking the specifications)■NoticeIt is recommended that you write down messages from the Answering Machine and store them in a separate location. DoCoMo is not responsible for lost recorded messages due to failure or repair of the FOMA handset.Greeting playback screenRecording MessageNew Message notification screenRecorded message listScreen to be inserted](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-29.png)
![78XXXXXMaking/Answering CallsbSelect a recorded message ycThe message is played.•/cu: Pauses.•l/r: Plays the previous/next message.•d: Stops the playback.•i [Return]: Returns to the Recorded message list screen. (Checking the specifications)■Icons on the Recorded message list screen (Checking the specifications)The following icons indicate types of messages: $★$: Unchecked voice call message $★$: Unchecked video call message$★$: Checked voice call message $★$: Checked video call message$★$: Protected voice call message $★$: Protected video call message• The function menu operations on the Answering Machine playback screen are identical to those on the melody playback screen.(Checking the specifications) →P213The Function Menu on the Recorded Message ListaRecorded message list screen (P77) yh [Function] y Perform the following operationsPlayPlays the selected message recorded in the answering Machine.CallMake a call to the phone number of the selected message recorded in the Answering Machine.yo/tAdd to Ph BookSave the caller's phone number of the selected message recorded in the Answering Machine to the phonebook. Go to Step 2 in "Saving Contacts to Phonebook from Received Calls or Dialed Calls" (P94).DeleteDeletes the selected message recorded in the Answering Machine.yh [Yes]Delete AllDeletes all messages recorded in the Answering Machine.yh [Yes]Lock・UnlockProtects/Unprotects a message recorded in the Answering Machine.SettingsSets the Answering Machine. Go to Step 2 (P95) in "Setting the Answering Machine".View Free SpaceChecks the available space, used space and total space for Answering Machine.](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-30.png)
![81Making/Answering Video Calls XXXXX• If an image requests the Caller ID, make the video call again sending the Caller ID.• International video calls are available using "WORLD CALL", DoCoMo's international telephone service. →P60• The connection cannot be established if the call is made to a non video-phone or even if the other party has a video-phone, when the handset power is turned off or outside of the service area. If you made a call to non video-phone, the call is cancelled and a confirmation to call again is displayed. (Checking the specifications) Select "Reconnect as Voice Call" to call again as a voice call. However, this may not occur if the destination is ISDN synchronous 64K or PIAFS, ISDN video-phone that does not handle 3G-324M (as of XX 2006), or wrong number was dialed. Communication charges may apply.• If an emergency call such as 110, 119 or 118 was made from the FOMA handset via video-phone and the other party does not have a video-phone, call again using a voice call.• i-mode mail or Message R/F arriving during a video call is stored at the i-mode center. SMS can be received even during a video call.• Digital communication charges apply even if you send the alternative image.• If the handset is not set to "DTMF ON", push signals cannot be sent by pressing dial keys during a Chara-den video call. →P82■When video calls are not connectedThe following error messages indicate the reason: • The message displayed may not accurately describe the actual situation depending on the other party's handset or subscription to Network Services.The Function Menu on the Connecting Screen/Video Call ScreenaConnecting screen (P80)/Video call screen (P80) y h [Function] y Perform the following operationsSelect ApplicationCalls up another function such as Phonebook. →P226Error Message ReasonVideo Call FailedCheck number, then redial.The dialed phone number is no longer in use.Number Busy The line is busy or using packet communication.• Select "Reconnect as Voice Call" to switch to a voice call.• Select "Redial Video Call" to try a video call again.• Select "Send Message" to create and send mail with the entered phone number as an address.Video Call FailedOut of the Service Area/Power Off. Send a Message?The other party is in a location where no signals are received or the phone is turned off.• Press h [Yes] to create and send SMS with the entered phone number as an address.Video Call Failed.Public Mode (Drive Mode).Create a Message?The other party has set Public Mode (Drive Mode).• Press h [Yes] to create and send mail with the entered phone number as an address.Video Call FailedSet Caller ID to ON.Send a Message?The other party's phone is set to reject no Caller ID calls and you did not send the Caller ID, or you dialed to V-Live or Visual Net. (Checking the specifications)• Press h [Yes] to create and send mail with the entered phone number as an address.Video call failed Appears for the reason other than the above.• Select "Reconnect as Voice Call" to switch to a voice call.• Select "Redial Video Call" to try a video call again.• Select "Send Message" to create and send mail with the entered phone number as an address.Default Lighting Conditions: 10 seconds (Checking the specifications) Brightness: 3Continued on the next page](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-33.png)
![83Making/Answering Video Calls XXXXXPlacing a Call on HoldYou can place a call on hold or cancel on hold using an operation icon.aVideo call screen (P80) y use s to select $★$ (Hold) y i [Hold]/i [Resume]While the call is on hold, the hold tone and image set in "Videocall Hold" under "Call Hold" are sent to the caller.• You can also cancel on hold by pressing o/t during hold.• While a call is held on hold, $★$ is displayed, and after Hold is cancelled, $★$ is displayed.Switching to a Handsfree CallYou can set to hear the other party's voice from the speaker using an operation icon.aVideo call screen (P80) y use s to select $★$ (Speaker) y i [Speaker On]/i [Speaker Off]• During a Handsfree call, $★$ is displayed, and after Handsfree is cancelled, $★$ is displayed.Receiving a Video CallaA call arrivesThe ringtone sounds and the incoming call lamp blinks.•N/M: Adjust the ringtone volume. (Checking the specifications)bt／oAnswer the call.■To answer the call with sending your camera image to the callerPress i [Use Image]. An image or Chara-den is sent to the other party according to the settings in "Alternate Image".cp to terminate the callIncoming Video Call screenContinued on the next page](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-35.png)
![84Making/Answering Video Calls XXXXX• Depending on the settings in "Style", the incoming call actions such as a ringtone, vibration or screen display vary. →P106, P108• If the caller is saved in the Phonebook, depending on the saved settings, the incoming call actions, such as ringtone, screen display or incoming call lamp vary.• When Manner Mode is set, the ringtone does not sound. When Public Mode (Drive Mode) is set, the ringtone does not sound and the incoming call lamp does not blink.• When "Open To Answer" is set, you can answer a video call by opening the handset.• You can set to delay the incoming call action for a call made from a party not saved in the Phonebook in "Ring Delay".• When the Voicemail service is activated, SMS notifies you of a new message.• Even if the Call Forwarding service is activated, an incoming video call is not forwarded if the forwarding destination is not a 3G-324M video-phone handset. Check the forwarding destination device before setting the Call forwarding.• i-mode mail or Message R/F arriving during a video call is stored at the i-mode center. SMS can be received even during a video call.• A video call cannot be received with 32K. (Checking the specifications)The Function Menu on the Incoming Video Call ScreenaIncoming Video Call screen (P83) y h [Function] y Perform the following operationsAnswerReceives a video call.IgnoreReject an incoming call and hang up.Answer HoldPlaces the call on hold.Call ForwardTransfers a video call to the specified number.• This option is not available unless you subscribe to the Call Forwarding service and you specify a forwarding destination.Call Forwarding](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-36.png)
![85Making/Answering Video Calls XXXXXUsing Chara-denYou can send a character of Chara-den instead of camera image to the other party. The movement of the character can be controlled using keys.• Set "Alternate Image" to "Chara-den" in advance.aPress i [Use Image] when a call arrives• Press 0 - 9 and # to control the character.■To view the character's actionPress h [Function] to select "Action List" to open the action list screen. Select an action and press h [Select] to check the action.■To switch action modePress h [Function] and select "Change Action" to switch between Whole action mode and Part action mode.• For operations on the Action list screen or Chara-den, or details of Action modes, see "Chara-den" (P213).• Emotions of character are expressed as a whole in Whole action mode, and using a face, arms and legs in Part action mode.• When "DTMF On" is set, Chara-den cannot be controlled by pressing dial keys. (Checking the specifications)Setting the Image to Send to the Other PartySwitching between Camera Image and Alternate ImageaVideo call screen (P80) y use s to select $★$ (Image) y i [Use image]/i [Camera On]• You can also press t to switch between Camera image and Alternative image.• The Alternate image sent to the other party is either an image or Chara-den according to the settings in "Alternate image" of "Video Call Settings".• While the Camera image is sent, $★$ is displayed, and while the Alternate image is sent, $★$ is displayed.Video call screen©BVIGChara-den](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-37.png)
![86Making/Answering Video Calls XXXXXSwitching between the Internal and External View of the CameraaVideo call screen (P80) y use s to select $★$ (Camera) y i [Ext. View]/i [Int. View]• While the Internal camera is used, $★$ is displayed, and while the External camera is used, $★$ is displayed.HandsfreeSetting Handsfree for Video CallsYou can set whether the other party's voice to come from the speaker using Handsfree or from the earpiece when receiving a video call. (Checking the specifications)ac y $★$ (Settings) y "In-Call Setup" y "Video Call Settings" y "Handsfree" y "Speaker"/"Earpiece"Setting a Displayed Image during a Video CallSwitching between Main and Sub windowsaVideo call screen (P80) y use s to select $★$ (Window) y i [Swap View]• While switched, $★$ is displayed, and after the headset is cancelled, $★$ is displayed.Default SpeakerDefault Main window: The other party's image Sub window: Your image](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-38.png)
![87Making/Answering Video Calls XXXXXChanging the Camera Image to a Mirror ImageYou can see the In view with the right and left inversed (Mirror On), or with the original right and left (Mirror Off).aVideo call screen (P80) y h [Function] y "Setup" y "Mirror On"/"Mirror Off"Adjusting the white balanceYou can adjust the white balance according to the light source of the shooting location.aVideo call screen (P80) y h [Function] y "Setup" y "Lighting Conditions"Automatic : Adjust automatically.Sunny : Suitable for a call outdoor and sunny.Indoor (Home) : Suitable for a call under incandescent lighting.Indoor (Office) : Suitable for a call under florescent lighting.Night : Suitable for a call at night.bSelect a setting y h [Select]• If you select "Off", the backlight does not turn on.Adjusting the Brightness of the ScreenThe brightness can be adjusted to 6 levels. (Checking the specifications)aVideo call screen (P80) y h [Function] y "Brightness"The Brightness screen opens. (Checking the specifications)bUse a to adjust the brightness y h [OK]Videocall HoldSetting a Video Call Hold Tone and ImageYou can set a hold tone and an image that is displayed on your handset while a call is on hold. (Checking the specifications)Default Auto (Checking the specifications)Default 3 (Checking the specifications)Default Video Call Hold Tone: Japanese Video Call Hold Image: (Checking the specifications)Continued on the next page](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-39.png)
![88Making/Answering Video Calls XXXXXac y $★$ (Settings) y "In-Call Setup" y "Call Hold" y "Videocall Hold" y Perform the following operationsVideocall Hold ToneVideocall Hold Imagey Select a folder y c y Select an image y c■Video Call Hold ToneA call hold tone is played as follows: Japanese (Checking the specifications)English (Checking the specifications)Video Call SettingsChanging the Video Call SettingsSetting Alternate image/Chara-denYou can set the alternate image sent by pressing h [Use Image] during a video call.ac y $★$ (Settings) y "In-Call Setup" y "Videocall Settings" y "Alternate image"My Pictures : An image is set as the Alternative image. Go to Step 2.Chara-den : Chara-den is set. Go to Step 2.bSelect a folder ycy Select an image/Chara-den ycJapaneseEnglish: The hold tone is set to Japanese.: The hold tone is set to English.Default (Checking the specifications)](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-40.png)
![91Phonebook XXXXXSaving in the FOMA Handset Contactsad y "[New]"bPerform the following operations NameEnter using Kanji, Hiragana, Pictographs, symbols, alphanumeric or Katakana. Up to 16 full-pitch or 32 half-pitch characters can be entered.y Enter a nameReadingEnter or edit when necessary. Enter using Katakana, alphanumeric or symbols. Up to 32 half-pitch characters can be entered.y Enter a ReadingNicknameEnter using Kanji, Hiragana, Pictographs, symbols, alphanumeric or Katakana. Up to 50 full-/half-pitch characters can be entered.y Enter a NicknameNumberUp to 26 digits can be entered.y Enter a phone number y i [OK]TypeSet a type for the phone number.y Select a type y h [Select]Video NumberSet whether the entered phone number is for a video-phone.y "Yes"/"No"EmailEnter using alphanumeric or symbols. Up to 50 half-pitch characters can be entered.y Enter an Email addressTypeSet a type of an Email address.y Select a type y h [Select]Store ToSpecify the saving destination. In this example, select "Phone".y "Phone"/"UIM"URLEnter using alphanumeric or symbols. Up to 128 half-pitch characters can be entered.y Enter a URLPostal AddressEnter Address using Kanji, Hiragana, Pictographs, symbols, alphanumeric or Katakana. Up to 62 full- or half-pitch characters can be entered for "Street 1" and "Street 2". Up to 32 full- or half-pitch characters can be entered for other items.y Select item to enter ycy Enter Address ycCreate Contact screenTo be insertedContinued on the next page](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-43.png)
![92Phonebook XXXXXTypeSet a type for the address.y Select a type y h [Select]Categoryy Select a category y h [Select]Picture IDSpecify an image to be displayed on the Phonebook list or on the Incoming call screen for a call from this caller.Ringer IDSpecify a ringtone for a call from this caller.y Select a folder y c y Select a ringtone/melody y cChara-denSpecify a Chara-den to be displayed as an alternative image during a video call to this party. (Checking the specifications)y Select a folder y c y Select a Chara-den y cBirthdayy Use a to enter the date y h [OK]SecretSave an entry as secret and set "Secret Data" to "Hide" to not display the entry.y "Yes"/"No"RejectReject an incoming call from the saved phone number.y "Yes"/"No"NotesEnter using Kanji, Hiragana, Pictographs, symbols, alphanumeric or Katakana. Up to 128 full-/half-pitch characters can be entered.y Enter a noteci [Complete]• Use the function menu to add a phone number, Email address, URL, or postal address field. →P94• The default type for a phone number, email address, and postal address are "General phone", "Mobile phone" and "Home".• The following operations are available by pressing h [Function] on the phone number entry screen:- Select in order of "Attach Number" y "Dialed Calls"/"Received Calls"/"Phonebook" to select a phone number from a call log or Contact to enter the phone number.- Select "Cancel Entry" to cancel saving.• The default for Category is "General".• The birth date also can be entered using dial keys.• Depending on the image size, images may take a while to open. (Checking the specifications)• If "Secret Data" is set to "Show", the setting field of "Secret" does not appear. (Checking the specifications)Take PictureSelect PictureRemove Picture: Capture an image to save. Press c to capture an image and press h [Insert] to save.: Select a folder and press c, then select an image and press c to save.: Deletes a saved image.NumberCategoryBirthdayPicture IDSecret](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-44.png)
![93Phonebook XXXXXSaving in the UIM ContactsaThe Create Contact screen (P91) y "Store To" y "UIM"bPerform the following operationsNameEnter using Kanji, Hiragana, Pictographs, symbols, alphanumeric or Katakana. Up to 10 full-pitch or 21 half-pitch characters can be entered. (Checking the specifications)y Enter a nameReadingEnter or edit when necessary. Enter using Katakana, alphanumeric or symbols. Up to 12 full-pitch or 25 half-pitch characters can be entered. (Checking the specifications)y Enter a ReadingPrimary Number (Checking the specifications)Enter a primary phone number. y Enter a phone number y i [OK]NumberUp to 26 digits can be entered to the UIM Card (green) and up to 20 digits to the UIM Card (blue).y Enter a phone number y i [OK]Type (Checking the specifications)Set a type of a phone number.y Select a type y h [Select]EmailEnter using alphanumeric or symbols. Up to 50 half-pitch characters can be entered.y Enter an Email addressCategoryy Select a category y h [Select]Secret (Checking the specifications)Save an entry as secret and set "Secret Data" to "Hide" not to display the entry.y "Yes"/"No"ci [Complete]Create Contact screenTo be insertedContinued on the next page](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-45.png)
![94Phonebook XXXXX• The default type for a phone number is "General Phone".(Checking the specifications)• The following operations are available by pressing h [Function] on the phone number entry screen:- Select in order of "Browse" y "Dialed Calls"/"Received Calls"/"Phonebook" to select a phone number from a call log or Contact to enter the phone number.- Select "Cancel Entry" to cancel saving.• The default for Category is "General".• If "Secret Data" is set to "Show", the setting field of "Secret" does not appear. (Checking the specifications)The Function Menu on the Create Contact ScreenaThe Create Contact screen (P91) y h [Function] y Perform the following operationsAdd NumberAdds another phone number entry field.Add E mailAdds another Email address entry field.Add URLAdds a URL entry field.Add Postal AddressAdds a postal address entry field.CancelCancels saving an entry to the Phonebook.• If "Store To" is set to "UIM", only "Cancel" is displayed.Saving Contacts to the Phonebook from Received Calls or Dialed CallsYou can save entries to a Phonebook from the list or detail screens of calls, mail, SMS, bookmarks, or screen memos that contains a phone number, mail address or URL. Also, you can save a phone number currently being entered/displayed on the phone number entry screen, compose mail screen, or Web site.<Example: Saving an entry from Dialed Calls list to the FOMA handset phonebook>aDialed Calls list screen (P56) y Select an entry y h [Function] y "Register"■To save from the phone number entry screenPress i [Save].■To save from other screensSelect an item or phone number and press h [Function], then select "Add to Phonebook".NumberCategorySecret](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-46.png)
![95Phonebook XXXXXbSelect a saving method y h [Select]• An item to overwrite appears as "Replace Email", "Replace URL" or "Replace Picture" depending on the selected item or display under Step 1.Create New Contact : Save a new entry to a Phonebook. Go to Step 5.Add to Contact : Add items to an existing Phonebook entry. The phonebook selection screen appears.Replace Number : Overwrites an existing Phonebook entry. The phonebook selection screen appears.cSelect a Phonebook entry to save y c• Go to Step 5 if you select "Add to Contact".dSelect a phone number to overwrite y h [Select]• Select an Email address if selecting "Overwrite Email", and a URL if selecting "Overwrite URL" in Step 2.• If "Replace Picture" is selected in Step 2, a confirmation to overwrite appears. Press h [Yes] and go to Step 5.eSave/edit the Phonebook entry y i [Complete]• For saving a Contact, see Step 2 in “Saving to the Phonebook” (P91).• To save an item from the Barcode reader scanned result screen, select "Add to Phonebook" and select "Add to Phonebook" on the Function menu screen. If the Scanned result screen contains a phone number, select the phone number and press c and select "Add to Phonebook" on the Function menu screen.• The following operations are available by pressing h [Function] on the Contact selection screen:- Select "Search" to find a Contact. →P97- Select the order of "View" y "Phone & UIM Card"/"UIM Card"/"Phone Contacts" to select a Contact type (phone or UIM).- Select "Cancel" to cancel the operation.Edit Category/UIM CategorySaving/Editing a Category NameCategory names can be saved/edited/managed for both the FOMA handset phonebook and the UIM phonebook. Up to 10 categories can be saved in each Phonebook.• The pre-installed "General" cannot be edited or deleted.• Only the category names and members can be saved/edited on the UIM phonebook.aPhonebook list (P98)/Phonebook detail screen (P98) y h [Function] y "Manage Contacts" y "Edit Phone Categories"/"Edit UIM Categories"■To view a category before editingSelect a category and press c [Select]. The Category detail screen opens and you can check a set image or ringtone, or assigned members.Categories screenScreen to be insertedContinued on the next page](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-47.png)
![96Phonebook XXXXXb"[New Category]"■To edit a saved categorySelect a saved Category and press h [Function], then select "Edit Category".cPerform the following operationsNameEnter a category name. Up to 24 full-/half-pitch characters can be entered.y Enter a nameMembersSelect a Phonebook entry from the select a member screen.y Select a Phonebook entry y c y i [Complete]Picture IDSpecify an image to be displayed on the incoming call screen when a call arrives from a group member.y Select a folder y c y Select an image y cRinger IDSpecify a ringtone for a call from a category member.y Select a folder y c y Select a ringtone/melody y cLight IDSpecify an Light ID for the incoming call lamp when a call arrives from a group member.y Select an Light ID y c [Select]• The following operations are available by pressing h [Function] on the Member selection screen:- Select "Search" to find a Contact. →P97- Select "Search All"/"Unselect All" to select or deselect all Contacts.- Select "View Selected" to open a list of selected Contacts.- Select "Cancel" to cancel the operation.• If you select "(None)", this option is set to the same setting as "Lights ID".The Function Menu on the Categories/Category Detail ScreenaCategories screen (P95)/Category detail screen (P96) y h [Function] y Perform the following operationsEdit CategoryEdit the selected category. Go to Step 3 in "Saving/Editing a Category Name" (P96).Delete CategoryDeletes the selected category.y h [Yes]MembersLight IDNew Category screenScreen to be inserted](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-48.png)
![97Phonebook XXXXXSearchMaking a Call from the PhonebookSearching for an Entry Using Its Reading/Alphabet/Phone Number/Symbols/PictogramEnter a reading or phone number to search for a Phonebook entry. You can also enter alphabet characters, symbols or pictographs to search for an entry.aPhonebook list (P98) y h [Function] y "Search" y Perform the following operationsReadingEnter a part of the reading. (Checking the specifications)y Enter a part of the Reading y cAlphabetEnter alphabet characters contained in any item of the entry. (Checking the specifications)y Enter alphabet characters y cPhone NumberEnter a part of the phone number. (Checking the specifications)y Enter a part of the phone number y cSymbolEnter a symbol contained in any item of the entry. (Checking the specifications)y Select a symbol y h [Confirm] y cE-MojiEnter a pictograph contained in any item of the entry. (Checking the specifications)y Select a pictograph y h [Confirm] y c (Checking the specifications)bSelect a Phonebook entry y oThe phone number entry screen opens with the phone number entered.co■To make a video callPress t.Filter by EmailYou can display only phonebook entries with Email saved on the Phonebook list to find an entry.aPhonebook list (P98) y h [Function] y "Filter by" y "Email"The Phonebook list screen of only entries with Email opens.bSelect a Phonebook entry ycy Select the phone number yoThe phone number entry screen opens with the phone number entered.coContinued on the next page](https://usermanual.wiki/Motorola-Mobility/T56GX1.Exhibit-8B-Users-Manual/User-Guide-712684-Page-49.png)