Motorola Mobility P6JV1 Bluetooth Handsfree Set User Manual IHF1700M Users Guide v01 00

Motorola Mobility LLC Bluetooth Handsfree Set IHF1700M Users Guide v01 00

UserManual.wiki >

Motorola Mobility >

P6JV1 User Manual

Users Manual

MOTOMANUAL IHF1700M Music User Guide Draft Version 1.0

General and safety information European Union Directives Conformance Statement Hereby, Motorola Inc., declares that this IHF1700M is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can view your product's Declaration of Conformity (DoC) to Directive 1999/5/EC (the R&TTE Directive) at www.motorola.com/rtte. Caring for the Environment by Recycling When you see this symbol on a Motorola product, do not dispose the product with household waste. Recycling Mobile Phones and Accessories Do not dispose of mobile phones or electrical accessories, such as chargers or headsets, with your household waste. In some countries or regions, collection systems are set up to handle electrical and electronic waste items. Contact your regional authorities for more details. If collection systems aren’t available, return unwanted mobile phones or electrical accessories to any Motorola Approved Service Centre in your region. FCC Notice to Users Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. See47CFRSec.15.21. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See47CFRSec.15.19(3).

Using Your Bluetooth Handsfree System User Interface Module (UIM) Control Buttons The UIM enables you to set up and use the Bluetooth handsfree system. It has five buttons whose functions will vary depending on how they are pressed, and which mode the handsfree system is in. You can press and release a button or you can press and hold a button for greater than 1 second to invoke different functions for that button. Non Call Functions In Call Functions

Selecting your Language Before you can use the handsfree system’s voice recognition functions, you must select your language. 1 Turn off the vehicle ignition. 2 Press and hold the End button, turn on the vehicle ignition, and continue holding the End button for at least 10 seconds. The handsfree system enters language selection and responds: Language Menu. Press volume up or down to change language. 3 Press and release the Volume Up/Down buttons to scroll through the language choices. As you scroll to a language, the handsfree system plays the prompt for that language. (For example: American English. To choose this language, restart the vehicle.) 4 When you have selected the desired language, turn off the vehicle ignition and wait for the UIM LEDs to go off. 5 Turn on the vehicle ignition; the new language is now loaded. Note: When you change your handsfree system’s language, all contacts in your Contacts list, and devices in your Device list are deleted.

Connecting your Handset Device to the Handsfree System Before you can make a handsfree call, you must complete a Bluetooth connection between the kit and your handset device. You establish a Bluetooth connection between your handsfree system and handset device with a paired link. When you set up a paired link, the handsfree system remembers your handset device. Once the handsfree system and handset device are paired, your handsfree system automatically connects to your handset device every time you start your vehicle. This handsfree system supports paired links with up to 4 handset devices. Note: For safety reasons, it is recommended that pairing be done while the vehicle is stationary. Initial Pairing Tip: Before pairing, think of a suitable name for your handset device. For example ‘Jenny’s Phone’, ‘Karl’s Razr’ etc. Important: The process of initiating a Bluetooth connection with a handset device varies by manufacturer. Please have your handset device’s user manual available for reference if needed. 1 Your handset device’s Bluetooth feature is off by default. To use your car handsfree system, you must first turn on the Bluetooth feature in your device. See your device’s user manual. 2 Press and hold the Multi-Function button. The handsfree system responds: Set your device in scan mode and enter 0000 if prompted for the passcode. The Blue LED will flash slowly during the pairing process. 3 Perform a device discovery from the handset device (See your device’s user manual). Your handset device will search for any Bluetooth devices around it. When the search is complete, it will display a list of the devices it finds. Searching may take a minute or two to complete. 4 Select Motorola IHF1700M from the list of devices. 5 If prompted by the handset device, enter the passkey 0000, and press the OK key. 6 The handsfree system responds: Pairing complete. Please say a friendly name for the device. Say a friendly device name for your handset device. For example, you can say ‘Jenny’s Phone’ 7 The handsfree system responds: <device name> added. Some handset devices may ask you to accept the Bluetooth link. Enter Yes. 8 After a few seconds the handsfree system responds: Connection complete.

Automatic Connection After initial pairing, every time you start your vehicle, your handset device and handsfree system will automatically be connected (if your handset device is powered on and the relevant Bluetooth settings are not changed). If you start your vehicle, and your handset device is not present, the handsfree system will automatically try to connect to other handset devices present in the device list. When the wireless connection is established, the handsfree system responds: <device name> connected.

Using the Voice Recognition (VR) Features A press and release of the Multi-Function button will activate a voice recognition session. When you begin a VR session, you hear a prompt and then a short beep. This short beep - also known as a listening prompt - indicates that the handsfree system is waiting for a verbal command from you. The voice recognition handsfree system has 3 main menus - • Setup menu – Always available except when in a call. • Phone menu – Only available when a handset device is connected. • Call menu – Only available when a call is active. Depending on which menu you are in, saying the predefined commands will allow you to operate the handsfree system. The handsfree system includes help prompts in every menu. While learning to use the handsfree system, or whenever you need a reminder of the command list, say “Help”. Some menus have “Additional Help”. You can say “Repeat” whenever you are prompted for a Yes or No command. The handsfree system will repeat the question. Tip: A press and release of the Multi-Function button during a VR prompt will immediately stop the VR prompt and go the listening prompt. You can say “Cancel” to return to the last voice recognition menu. You can say “Exit” to exit the voice recognition session. Or use the UIM: A press and release of the End button will also exit the voice recognition session. Note: Any system prompts enclosed in {} represent prompts that are suppressed in Expert Mode. Adjusting the Voice Recognition Volume At any time except when in a call, the voice recognition’s menu volume can be adjusted using the Volume Up/Down buttons. Press and release a Volume Up/Down button to increase/decrease the voice recognition volume by a single level Press and hold a Volume Up/Down button to increase/decrease the voice recognition volume rapidly. Tones are played to indicate when the maximum and minimum volumes are reached.

Adding Contact list entries You can store a list of names and phone numbers locally in the handsfree system’s contact list. The contact names stored in the Contact List can be called using the "Call <name>" VR command. The Contact List can support up to 50 entries. The Contact List is only available when a handset device is connected to the handsfree system. You can enter up to 50 digits for each Contact List entry. You can also use +, *, or # characters when dialing a number. “Wait“ and “Pause” commands are also accepted. Note: For safety reasons, it is recommended that contact list entries be added while the vehicle is stationary. Note: Speak numbers as continuous digits. For example, dictate 555-2211 as “5-5-5-2-2-1-1”, not “5-5-5-twenty-two-eleven.” Adding a Contact List Entry 1 Press and release the Multi-Function button. The handsfree system responds: Phone menu. {Say a command}. 2 When prompted, say “Contact List”. 3 The handsfree system responds: Contact list. {Say a command}. Say “Add Contact”. 4 When the handsfree system responds: Say the name. Recite the name of the contact to be stored. If an error is detected, the handsfree system asks you to try again. If it accepts the name, the handsfree system responds: Say the number for <name>. 5 Dictate the number as an entire number (without pauses between digits). or Dictate the number as a series of segments (for example, say the 1st 3 digits, then the next 3, etc.), until you have dictated the entire number. The handsfree system repeats the number it heard. 6 When you have correctly entered the entire phone number, say “Store” (or “Yes”) to store the contact. The handsfree system responds: Contact added. Would you like to add another contact? 7 Say “No” to exit contact list. or Say “Yes” to add another entry. Deleting a Contact List Entry 1 Press and release the Multi-Function button. The handsfree system responds: Phone menu. {Say a command}. 2 When prompted, say “Contact List”. 3 The handsfree system responds: Contact list. {Say a command}. Say “Delete <name>” (where <name> is the name of a contact list entry). 4 When the handsfree system responds: Are you sure you want to delete the contact <name>? say “Yes”. The handsfree system responds: Contact deleted.

Using the Phone Menu/Features This feature is only available when a handset device is connected. Answering an Incoming Call Press and release the Send button to answer an incoming call. Tip: You can also accept an incoming call in handsfree using your handset device. When you receive an incoming call, the handsfree system responds: Call from <Caller ID>, if the caller ID is available. The handsfree system plays the handset device’s generated ring tone, if the handset device supports it. Otherwise, the handsfree system will generate its own ring tone. Tip: When you receive an incoming call from a number in the handsfree system’s contact list, the handsfree system will respond with: Call from <name>. Rejecting an Incoming Call Press and release the End button to reject an incoming call. The handsfree system responds: Call rejected. Tip: You can also reject an incoming call using your handset device. Placing a Call You can place a handsfree call using the handsfree system’s phone menu in the following ways: • Using the system’s Contact List. • Digit dial using voice recognition. • Using the handset device’s voice commands. • Using Redial. • Using the handset device’s memory dial. • Dial a number from the handset device. A handset device must be connected to handsfree system to use these features. At anytime, a press and release of the End button will terminate the dialing operation. Placing a Call using the Contact List A valid contact must be stored in the handsfree system’s Contact List to use this feature 1 Press and release the Multi-Function button. The handsfree system responds: Phone menu. {Say a command}. 2 When prompted, say “Call <name>”. The handsfree system responds: {Call <name> yes or no?} 3 If the contact recited by the handsfree system is correct, say “Yes”. The handsfree system responds: Calling <name>. Tip: When in Expert Mode, the Call <name> yes or no? is bypassed Placing a Call with Voice Recognition You can enter a phone number as 1 or more segments of digits. A segment can include up to 15 digits. An entire number can include no more than 32 digits. You can also use +, *, or # characters when dialing a number. “Wait“ and “Pause” commands are also accepted. Note: Speak numbers as continuous digits. For example, dictate 555-2211 as “5-5-5-2-2-1-1”, not “5-5-5-twenty-two-eleven.” Calling with a Whole Number

1 Press and release the Multi-Function button. The handsfree system responds: Phone menu. {Say a command}. 2 When prompted, say “Dial Number”. The handsfree system responds: Number please? 3 Dictate the number as a single set of digits (without pauses between digits). The handsfree system recites the digits heard. 4 If the number recited by the handsfree system is correct, say “Dial” ” (or “Yes”) to dial the number. The handsfree system responds: Dialing. Action Calling with Digit Segments 1 Press and release the Multi-Function button. The handsfree system responds: Phone menu. {Say a command}. 2 When prompted, say “Dial Number”. The handsfree system responds: Number please? 3 Dictate the first segment of digits. (For example, say the first 3 numbers.) The handsfree system recites the digits heard. 4 Dictate the next segment of digits. The handsfree system recites the digits heard. Repeat this step until you enter the complete phone number. 5 When the complete number is recited by the handsfree system, say “Dial” (or “Yes”) to dial the number. The handsfree system responds: Dialing. Tip: To delete a phone number segment, say “Clear” when prompted for the next segment. The handsfree system responds Last String Cleared, and echoes any remaining segments, and waits for you to dictate a new segment. Tip: To delete all phone number segments dictated so far, say “Clear All” when prompted for the next segment. The handsfree system clears all segments and returns to the Number Please? prompt. Placing a Call using Phone Voice Commands For some handset devices, a voice tag must already be stored in the handset device to use this feature. For other handset devices, this command may activate the handset device’s internal VR application such as the Motorola’s OBEYMEMOTO. 1 Press and release the Multi-Function button. The handsfree system responds: Phone menu. {Say a command}. 2 When prompted, say “Phone voice commands”. The handsfree system responds with the listening prompt. 3 Say “<voice tag>” (where <voice tag> is a voice tag stored in the handset device). or Say a command understood by the handset device’s VR application. The handsfree device calls the number associated with the voice tag/VR command. Action Or use the UIM: A press and hold of the Send button will activate the phone voice commands feature. Tip: Using this feature and OBEYMEMOTO, you can dial numbers directly from your handset device’s phonebook Placing a Call using Redial 1 Press and release the Multi-Function button. The handsfree system responds: Phone menu. {Say a command}. 2 When prompted, say “Redial”. The handsfree system responds: Redialing. and redials the last number dialed on the handset device.

Action Or use the UIM: A press and release of the Send button will redial the last number dialed on the handset device. Placing a Call using Memory Dial Speak memory dial numbers as continuous digits. For example, dictate memory dial location 22 as “2-2”, not “twenty-two.” 1 Press and release the Multi-Function button. The handsfree system responds: Phone menu. {Say a command}. 2 When prompted, say “Memory Dial”. The handsfree system responds: Memory dial number please. 3 Recite the memory dial number. The handsfree system repeats the number it heard and asks: Is this correct? 4 If the number recited is correct, say “Yes”. The handsfree system responds: Dialing. and places the call. Action Using the Handset Device You can dial a handsfree call directly from your handset device in the normal manner.

Using the Call Menu/Features A call must be in progress to use these features. Adjusting the Handsfree Call Volume During a handsfree call, the volume can adjusted using the Volume Up/Down buttons Press and release a Volume Up/Down button to increase/decrease the call volume by a single level Press and hold a Volume Up/Down button to increase/decrease the call volume rapidly. Tones are played to indicate when the maximum and minimum volumes are reached. Ending the Call 1 Press and release the Multi-Function button. The handsfree system responds: Call menu. {Say a command}. 2 When prompted, say “Hang Up”. The handsfree system responds: Call ended. Or use the UIM: During a call, a press and release of the End button will end the call. Muting the Call 1 Press and release the Multi-Function button. The handsfree system responds: Call menu. {Say a command}. 2 When prompted, say “Mute”. The handsfree system responds: Call Muted. The Blue LED will flash off slowly to indicate a muted call. Or use the UIM: During a call, a press and hold of the Multi-Function button will mute the microphone. Unmuting the Call 1 Press and release the Multi-Function button. The handsfree system responds: Call menu. {Say a command}. 2 When prompted, say “Unmute”. The handsfree system responds: Call unmuted. The Blue LED will stop flashing. Or use the UIM: A press and hold of the Multi-Function button while the call is muted will unmute the microphone. Transferring the Handsfree Call to your Handset Device 1 Press and release the Multi-Function button. The handsfree system responds: Call menu. {Say a command}. 2 When prompted, say “Privacy mode”. The handsfree system responds: Privacy mode and transfers the call to the handset device. Or use the UIM: During a handsfree call, a press and hold of the Send button will transfer the handsfree call to privacy mode.

Transferring a Private Call to Handsfree 1 Press and release the Multi-Function button. The handsfree system responds: Call menu. {Say a command}. 2 When prompted, say “Handsfree mode”. The handsfree system responds: Handsfree mode and transfers the call to the handsfree system. Or use the UIM: During a private call, a press and hold of the Send button will transfer the call to the handsfree system. Note: Some handset devices will disconnect the Bluetooth link to the system when the call is switched to privacy mode. In this case the ‘Call menu’ will not be available. To switch the call to handsfree, use the UIM. Sending DTMF tones 1 Press and release the Multi-Function button. The handsfree system responds: Call menu. {Say a command}. 2 When prompted, say “Enter <digits>” to send digits as DTMF tones. You can also use * and # characters. Tip: You can send DTMF tones from the handset device’s keypad. Placing the Call on Hold A press and release of the Send button will put the active call on hold. Resuming the Held Call A press and release of the Send button while a call is held will resume the call. Accepting a Waiting Call When you are in a call, an audible beep signals an incoming call. The Blue LED will flash fast. Press and release the Send button to place the active call on hold and answer the waiting call. The Blue LED will stop flashing fast when the waiting call is accepted. Rejecting a Waiting Call While there is a waiting call, a press and release of the End button to reject the waiting call. Switching between Active Call and Held Call 1 Press and release the Multi-Function button. The handsfree system responds: Call menu. {Say a command}. 2 When prompted, say “Switch call”. The handsfree system responds: Switching active calls. Or use the UIM: A press and release of the Send button will switch between the held and active calls. Ending the Active Call while a Call is Held 1 Press and release the Multi-Function button.

The handsfree system responds: Call menu. {Say a command}. 2 When prompted, say “Hang Up”. The handsfree system responds: Call ended. The held call is automatically resumed. Or use the UIM: A press and release of the End button will end the active call, while a call is held. Make an outgoing call while in an active call When in an active call, you can make an outgoing call with the “Dial Number” and “Call <name>” VR commands which are also available in the call menu. The active call will be placed on hold. When dialing a new call, the active call will be put on hold. You can then use the “Conference” command to join the calls into a 3-way conference. Joining the Active Call and Held Call into a 3-Way Conference 1 Press and release the Multi-Function button. The handsfree system responds: Call menu. {Say a command}. 2 When prompted, say “Conference”. The handsfree system responds: Starting conference. Splitting a 3-Way Conference 1 Press and release the Multi-Function button. The handsfree system responds: Call menu. {Say a command}. 2 When prompted, say “Private conference”. The handsfree system responds: Leaving conference. The last call to be added to conference is placed on hold. Ending All Calls 1 Press and release the Multi-Function button. The handsfree system responds: Call menu. {Say a command}. 2 When prompted, say “Hangup all calls”. The handsfree system responds: All calls ended. Or use the UIM: A press and hold of the End button will end all active calls. Seamless Mobility If you have an active private call and you turn the vehicle ignition on, the handsfree system will automatically connect to your paired handset device and transfer the call to handsfree. If you have an active handsfree call and you switch the vehicle ignition off, the handsfree system will automatically transfer the call to your handset device. Some handset devices will ask to switch the call to the handset, select yes.

Managing the Contact list menu From the contact list menu, you can add, list, call and delete system contacts. The Contact List is only available when a handset device is connected to the handsfree system. Listing the Contact List Entries 1 Press and release the Multi-Function button. The handsfree system responds: Phone menu. {Say a command}. 2 When prompted, say “Contact List”. 3 The handsfree system responds: Contact list. {Say a command}. Say “List Contacts.” The handsfree system begins to list the contacts: First contact <name A>, next contact < name B>. . , last contact < name Z>. Tip: To move quickly through the contact list, you can say “Previous contact” or “Next contact”. Call a Contact when Listing Contact Entries 1 List the contacts. 2 When the contact name is played for the contact you want to call, say “Call Contact”. The handsfree system responds: Call <name> yes or no? 3 If the contact recited by the handsfree system is correct, say “Yes”. The handsfree system responds: Calling <name>. Delete a Contact when Listing Contact Entries 1 List the contacts. 2 When the contact name is played for the contact you want to delete, say “Delete Contact”. 3 When the handsfree system responds: Are you sure you want to delete the contact <name>? say “Yes”. The handsfree system responds: Contact deleted, and returns to listing the contacts. Get the Contact’s Details when Listing Contact Entries 1 List the contacts. 2 When the contact name is played for the contact you want to delete, say “Details”. The handsfree system responds with that contact’s number.

Adding Contact List Entries via Bluetooth You can quickly transfer numbers from your handset device’s phonebook via Bluetooth to the handsfree system Adding a Contact List Entry from your Handset Device 1 Press and release the Multi-Function button. The handsfree system responds: Phone menu. {Say a command}. 2 When prompted, say “Contact List”. 3 The handsfree system responds: Contact list. {Say a command}. Say “Add Phone Contact”. 4 The handsfree system disconnects your handset device and responds: Add phone contact and is ready to receive contacts via Bluetooth from your handset device. The Blue LED will flash fast to indicate that the handsfree system is waiting for contacts to be sent from your handset device. 5 Select the desired contact(s) on your handset device and send them via Bluetooth to Motorola IHF1700M. Refer to your handset device's user's guide for more details on how to transfer contacts via Bluetooth. 6 If prompted by the handset device, enter the passkey 0000, and press the OK key. 7 When the contact is received by the handsfree system, the system responds by reading out the contact number as follows: <contact number #1> Yes or No? Say “Yes” to accept the number. or Say “No” to reject the number and go to the next number/contact if one exists. 8 If the number is accepted, the handsfree system responds: Say the name. Recite the name of the contact to be stored e.g. Mark’s Mobile. If an error is detected, the handsfree system asks you to try again. If it accepts the name, the handsfree system responds: Contact <name> added. 9 If the sent contact has another number, the handsfree system responds: <contact number #2> Yes or No?. Simply repeat steps 7 and 8. If more than one contact is transferred, the handsfree system responds: Next contact. <contact number #3> Yes or No?. Simply repeat steps 7 and 8. This continues until all the sent contact numbers have been processed. 10 When all the sent contact numbers are processed, the handsfree system will respond: Would you like to add another contact? Say “Yes” to add another contact via Bluetooth. The handsfree system responds: Add phone contact and is ready to receive the next contact. or Say “No” to exit ‘Add Phone Contact’ mode. The handsfree system responds: Goodbye and automatically reconnects your handset device. 11 At any time, you can exit ‘Add Phone Contact’ mode by a press and release of the End button. The handsfree system responds: Goodbye and automatically reconnects your handset device. Tip: To speed up adding multiple contacts, step 10 is bypassed in Expert Mode. After adding a contact, the handsfree system will simply respond: Add phone contact and is ready to receive the next contact while the Blue LED remains flashing fast. Press and release the End button to exit at any time.

Using the Setup Menu The setup menu is used for Bluetooth device management features such as pairing, connecting, disconnecting and removing devices. The setup menu is also used to change various handsfree system settings such as Caller ID Announcement and Expert Mode. Activating the Setup Menu If a handset device is connected. 1 Press and release the Multi-Function button. The handsfree system responds: Phone menu. {Say a command}. 2 When prompted, say “Setup menu”. The handsfree system responds: Setup menu. {Say a command}. If a handset device is not connected. 1 Press and release the Multi-Function button. The handsfree system responds: Setup menu. {Say a command}. Pair a Handset Device Tip: Before pairing, think of a suitable name for your handset device. For example, you can say ‘Jenny’s Phone’, ‘Karl’s Razr’ etc. Important: The process of initiating a Bluetooth connection with a handset device varies by manufacturer. Please have your handset device’s user manual available for reference if needed. 1 Your handset device’s Bluetooth feature is off by default. To use your car handsfree system, you must first turn on the Bluetooth feature in your device. See your device’s user manual. 2 Activate the Setup menu. 3 When prompted, say “Pair Device”. The handsfree system responds: Set your device in scan mode and enter 0000 if prompted for the passcode. The Blue LED will flash slowly during the pairing process. 4 Perform a device discovery from the handset device (See your device’s user manual). Your handset device will search for any Bluetooth devices around it. When the search is complete, it will display a list of the devices it finds. Searching may take a minute or two to complete. 5 Select Motorola IHF1700M from the list of devices. 6 If prompted by the handset device, enter the passkey 0000, and press the OK key. 7 The handsfree system responds: Pairing complete. Please say a friendly name for the device. Say a friendly device name for your handset device. For example, you can say ‘Jenny’s Phone’ 8 The handsfree system responds: <device name> added. Some handset devices may ask you to accept the Bluetooth link. Enter Yes. 9 After a few seconds the handsfree system responds: Connection complete. Or use the UIM: A press and hold of the Multi-Function button will activate the pairing procedure. Connect a Paired Handset Device 1 Activate the Setup menu. 2 When prompted, say “Connect <device name>”, where <device name> is the friendly name for the handset device you want to connect. For example ‘Connect Jenny’s Phone’ The handsfree system responds: Connecting <device name>. Upon successful completion, the handsfree system responds: Connection complete.

Tip: You can quickly connect a paired handset device with a press and hold of the Send button when no devices are connected. Disconnect the Connected Handset Device This feature will disconnect the Bluetooth link to the handset device. The handset device will remain paired with the system. 1 Activate the Setup menu. 2 When prompted, say “Disconnect <device name>”, where <device name> is the friendly name for the handset device you want to disconnect. For example ‘Disconnect Jenny’s Phone’. The handsfree system responds: Disconnecting <device name>. Upon successful disconnection, the handsfree system responds: Disconnection complete. Or use the UIM: A press and hold of the End button will disconnect the connected handset device. Removing a Paired Handset Device This feature will remove the handset device from the device list. The handset device will no longer be paired with the handsfree system. To reconnect the handset device the pairing procedure must be redone. 1 Activate the Setup menu. 2 When prompted, say “Remove <device name>”, where <device name> is the friendly name for the handset device you want to remove. For example ‘Remove Jenny’s Phone’. 3 The handsfree system responds: Removing <device name>. Are you sure? 4 Say “Yes”. Upon successful removal, the handsfree system responds: Device Removed. Removing all Paired Handset Devices 1 Activate the Setup menu. 2 When prompted, say “Remove all Devices”. 3 The handsfree system responds: Are you sure, you want to remove all devices? 4 Say “Yes”. Upon successful removal, the handsfree system responds: All Devices Removed. Using the Device List Alternatively the handset devices can be managed using the “List Devices” command Listing the Handset Devices in the Device List 1 Activate the Setup menu. 2 When prompted, say “List Devices”. 3 The handsfree system begins to list the devices paired: First device <device A>, next device <device B>. . , last device <device D>. If a handset device is connected to the handsfree system: connected will be played after that device is listed. Tip: To move quickly through the device list, you can say ”Previous device” or ”Next device”. Connect a Handset Device when Listing the Devices 1 List the devices. 2 When the device name is played for the handset device you want to connect, say “Connect Device”. The handsfree system responds: Connecting <device name>. Upon successful completion, the handsfree system responds: Connection complete. Disconnect a Handset Device when Listing the Devices

1 List the devices. 2 When the device name is played for the handset device you want to disconnect, say “Disconnect Device”. The handsfree system responds: Disconnecting <device name>. Upon successful disconnection, the handsfree system responds: Disconnection complete. Remove a Handset Device when Listing the Devices 1 List the devices. 2 When the device name is played for the handset device you want to remove, say “Remove Device”. 3 The handsfree system responds: Removing <device name>. Are you sure? 4 Say “Yes”. Upon successful removal, the handsfree system responds: Device Removed. Call Announce Setting To turn the Caller ID Announce feature on or off. 1 Activate the Setup menu. 2 When prompted, say “Caller Announce On” or “Caller Announce Off”. The handsfree system responds: Caller Announce On or Caller Announce Off. Action Expert Mode Setting Expert Mode speeds up handsfree system operation for advanced users. To turn the Expert Mode feature on or off. 1 Activate the Setup menu. 2 When prompted, say “Expert Mode On” or “Expert Mode Off”. The handsfree system responds: Expert Mode On or Expert Mode Off. In this user guide, any system prompts enclosed in {} represent prompts that are suppressed in Expert Mode.

Autoplay feature The handsfree system will by default attempt to connect and play music at ignition on. You can switch this feature off with the Autoplay function Autoplay setting 1 List the devices. 2 When the device name is played for the music device you want to disable autoplay music for, say “Autoplay off”. The handsfree system responds: Autoplay music off. You can switch the feature back on with: “Autoplay on”. Forgotten device feature The forgotten device feature enables the handsfree system will scan for your device at ignition on and if not found, the car kit will play a message asking if you have forgotten your device Forgotten device setting 1 List the devices. 2 When the device name is played for the handset device you want to enable forgotten phone alert for, say “Forgotten device on”. The handsfree system responds: Forgotten phone alert on. You can switch the feature off with: “Forgotten device off”. Phone audio feature The phone audio setting enables you to play phone audio such as navigation prompts (or music) over the handsfree speakers Phone audio setting 1 Activate the Setup menu. 2 When prompted, say “Phone audio on”. The handsfree system will now route any phone audio sent over Bluetooth to the handsfree speakers You can switch the feature off with: “Phone audio off”.

Using the Music Features Note: Before you can use your Bluetooth-enabled music device, you must first create a paired link. To listen to music you can simply press play on your Bluetooth-enabled music device. The handsfree system will then stream high fidelity Bluetooth music to the car speakers You can also connect and control music using VR. Enabling Music Mode (Music control via UIM) 1 Press and release the Multi-Function button. The handsfree system responds: Phone menu. {Say a command} or Setup menu. {Say a command} 2 When prompted, say “Music”. If a music device is connected, the handsfree system will switch the UIM to music mode and attempt to play media on the connect music device otherwise it will attempt to connect to any paired music devices. Enabling Music Mode with a particular device Scenario 1 – HF device connected 1 Press and release the Multi-Function button. The handsfree system responds: Phone menu. {Say a command}. 2 When prompted, say “Setup menu”. The handsfree system responds: Setup menu. {Say a command}. 3 When prompted, say “Music with <device name>”, where <device name> is the friendly name for the music device you want to connect. For example ‘Connect Joe’s Rokr’ The handsfree system will attempt to connect to that music device and if successful switch the UIM into music mode. Scenario 2 – HF device not connected 1 Press and release the Multi-Function button. The handsfree system responds: Setup menu. {Say a command}. 2 When prompted, say “Music with <device name>”, where <device name> is the friendly name for the music device you want to connect. For example ‘Connect Joe’s Rokr’ The handsfree system will attempt to connect to that music device and if successful switch the UIM into music mode. Exiting Music Mode 1 Press and release the Multi-Function button. The handsfree system responds: Phone menu. {Say a command}. 2 When prompted, say “Exit music”, The handsfree system will exit music mode and stop the media player.

Audio Indicators Audio indicators are supported for the following events. New voicemail message received. You have a voicemail. New SMS message received You have a new message. Low battery. Phone battery low.

Voice Recognition Quick Reference Phone Menu Muti-function button “Setup menu”Phone menu. {Say a com mand}“Dial Number”“Call <name>”“Phone voice commands”“Contact List”“Help”“Exit” GoodbyePhone menu. You can say „Dial Number“ .....{Call < name> yes or no?}“No”“Yes”“Repeat”Number please?Setup menu. {Say a command}....“Clear”“Dial/Yes”“Clear all”“Redial” Redialing“Memory Dial” Memory dial number please<number> is this correct?<number><Listening Prompt> <Phone Voice Command><number>“No”“Yes”“Repeat”Contact list. {Say a command}....<number> CallingLast St r in g Clear ed...Number please?Cancelled. Phone menu. {Say a command}Calling {<name>}Call <name> yes or no?<number> is this correct?DialingCancelled. Phone menu. {Say a command}“Cancel” Cancelled. Phone menu. {Say a command}“Help” Dial menu. You can say „Clear“, „Clear all“,..“Exit” Goodbye“Help” Say yes to to call, no to cancel“Exit” Goodbye“Help” Say yes to to dial, no to cancel“Exit” Goodbye

Call Menu Muti-function button “Hang Up”Call menu. {Say a command}“Privacy mode” “Unmute”“Conference”“Help”“Exit” Go o d b y eCall menu. You can say „Dial Number“ ...Cal l Un m u t edPrivacy modeStarting conferenceCall ended“Switch call” Switching active calls“Handsfree mode” Handsfree mode“Mute” Call Muted“Enter <digits>”<digits>“Private conference” Leaving conference“Hangup all calls” All calls ended“Additional Help” Additional help. You can also say „Hang up“ ...“Call <name>” {Call <name> yes or no?}...“Dial Number” Number please?...

Contact List Menu

Setup Menu Muti-function button Setup menu. {Say a command}“Disconnect <device name>““Connect <device name>” Connecting < device name>... Connection complete“Pair Device”“Remove <device name>”“Remove all Devices”“List Devices”“Expert Mode on”“Call Announce on”“Help”“Cancel”“Exit” GoodbyeCancelled. Phone menu. {Say a command}*Setup menu. You can say „Pair device“ ...Disconnect ing < device nam e> ... Disconnect io n co mplet eRemoving < device name> . Are you sure?“No”“Yes”“Repeat”Are you sure you want to remove all devices“No”“Yes”“Repeat”Set your device in scan mode and enter 0000 if prompted for t he passcodeLast d evi ce < d evi ce name D>“Connect Device”“Disconnect Device”“Remove Device”Ex p e r t M o d e O n First device <devicenameA>“Next Device” “Previous Device”Next device < device name B..>OrOrPairing complete. Please say a friendly name for the device< device name> added“<device name>”Expert Mode Off Call Announce On Call Announce Off Removing < device name> . Are you...Disconnecting <device name>...Connecting <device name>..Next device < device name>Previous device <device name>“Help” Say yes to to remove the device...“Exit” GoodbyeDevice removedCancelled. Set up menu. {Say a command}Removing <device name>. Are you sure?Cancelled. Set up menu. {Say a command}All devices removedSay yes to to remove all t he devices...Are you sure you want to remove all...“Help”“Exit” Goodbye“Cancel” Cancelled. Set up menu. {Say a command}“Help” You can say „Next device“ , „Previous...“Exit” Goodbye* Only if a handsfree device is connected“Expert Mode off”“Call Announce off”

Appendix Detailed UIM Button Functions State Button Action Idle Connected Call VR session Press and release • Activate Setup menu • Activate phone menu • Activate call menu • End prompt, play listen prompt Multi-Function Press and hold • Start pairing process • Start pairing process • Mute • Unmute - Press and release - • Answer incoming call • Last number Redial • Toggle between hold and resume • Answer waiting call • Switch between held and active call - Send Press and hold • Connect a paired handset device • Activate phone voice commands • Transfer call from handsfree system to handset • Transfer call from handset to handsfree system - Press and release • End pairing process • Reject incoming call • End pairing process • End the active call • Reject waiting call • End VR session End Press and hold • For 10 seconds at ignition on to select language menu • Disconnect the handset • End all active calls - Press and release • Increase VR volume by one level • Increase VR volume by one level • Increase handsfree volume by one level • Increase VR volume by one level • In language menu, select next language Volume Up Press and hold • Rapidly increase VR volume by multiple levels • Rapidly increase VR volume by multiple levels • Rapidly increase handsfree volume by multiple levels • Rapidly increase VR volume by multiple levels Press and release • Increase VR volume by one level • Increase VR volume by one level • Decrease handsfree volume by one level • Decrease VR volume by one level • In language menu, select last language Volume Down Press and hold • Rapidly decrease VR volume by multiple levels • Rapidly decrease VR volume by multiple levels • Rapidly decrease handsfree volume by multiple levels • Rapidly decrease VR volume by multiple levels Multi-Function + Send Press and hold • Reset • Reset • Reset • Reset

UIM LED Indicator Functions State LED Handset Device Connected Paging Pairing Call muted Incoming call Number Transfer Idle Upon Ignition off BLUE On Flashes on slow Flashes Slow Flashes off slow Flashes Fast Flashes Slow Dim Flashes ->Off GREEN Dim Dim Dim Dim Dim Dim Dim Dim->Off RED Dim Dim Dim Dim Dim Dim Dim Dim->Off Pronunciation Chart Symbol Pronunciation * Star # pound “or” hash + Plus 0 zero “or” oh W Wait P Pause

Navigation menu