Motorola Mobility P56LM1 i786/i786w-SERIES iDEN MOTOTALK PHONE W/BLUETOOTH User Manual Exhibit 12

Motorola Mobility LLC i786/i786w-SERIES iDEN MOTOTALK PHONE W/BLUETOOTH Exhibit 12

Contents

Users Guide 2

15Push-to-TalkPush-to-Talkone or more, talk to them allPrivate callsPrivate calls are push-to-talk calls between two people.Make and answer private callsTo make a private call:•Enter the recipient’s PTT number.•Press Menu / > FContacts, and select a contact that has a PTT number.To talk, press and hold the PTT Button. To listen, release the PTT Button.To answer a private call, press the PTT Button after the caller has stopped talking.To end a private call, press End/Power @ or do nothing. The call will end after a few seconds.Set push-to-talk speakerYou can listen to push-to-talk calls through your phone’s speaker or earpiece. Press Speaker ) to turn the speaker on or off.One touch PTTYou can customize the PTT Button for quick access to push-to-talk functions from the home screen.Find it: Menu / > Push To Talk > PT Manager > Configure > One Touch PTToptionsOff Tu r n o ff One Touch PTT.Quick PTT Go to Quick PTT. See “Quick PTT” on page 16.Last Call Call the most recent Private ID or SDG list on the Recent Calls list.PTT Contacts Launch the PTT Contacts list from the home screen by pressing the PTT Button.Assigned No. Call a Private ID you assigned. Enter the number using your keypad, or press Search and select from Contacts, Recent Calls, or Memo.PT Manager Go to the PT Manager. See “PT manager” on page 16.
16 Push-to-TalkQuick PTTWith Quick PTT, you can quickly make a PTT call, create an SDG list, or make an SDG call when accessing any Private ID on your phone.Find it: Menu / > Push To Talk > Quick PTTPress the Navigation Key right or left to move between Contacts, Recent Calls, or Memo.To make a PTT call or SDG call: 1Select the entries you want to call.Send Message See “Send messages” on page 17Send Picture See “Send pictures” on page 18.Send Event See “Send a datebook event” on page 19Send My Info See “Send my info” on page 19Send Contact See “Send contact information” on page 20Send Location See “Send location information” on page 20options 2Press Done.3Press the PTT Button.To save your selections as an SDG list, press Menu / > Save SDG. For more information about SDG lists, see “SDG calls” on page 21.PT managerThe PT Manager lets you quickly access PTT features, and other PTT call features, from the main menu.Find it: Menu / > Push To Talk > PT Manager•Select Quick PTT, Send Message, Send Picture, Send Event, Send My Info, Send Contact, or Configure. After choosing what PTT item you’re sending, select a contact and press the PTT Button to send.•Select configure to configure your PTT Quick Notes, PTT My Info, PTT Location, One Touch PTT, or On/Off PTT.Call alertsUse call alerts to tell someone you want to speak to them.To send a call alert:•Enter a Private ID, and press Alert. When prompted, press the PTT Button.
17Push-to-Talk•Press Contacts, and select a contact containing a Private ID. Press Alert, and press the PTT Button when prompted.When you receive a call alert, you can:•Answer: Press the PTT Button to begin a private call with the sender.• Queue: Press Queue to store the call alert to the call alert queue.•Clear: Press Clear to dismiss and delete the call alert.Note: Call alerts will automatically be moved to the queue after a few minutes of inactivity. You won’t be able to make phone calls or private calls until the call alert is moved, or you’ve chosen one of these options.Turn off a call alertYou can press the volume keys to turn off a call alert before answering the call.Switch from a PTT call to a phone callFor longer calls, you can switch from a PTT call to a phone call if the other caller has a phone number stored in Contacts.During a PTT call press Talk `. When prompted, press Yes to begin the phone call.Push to sendDuring a private call, you can send short text messages, contacts, photos, events, or your contact info.When you make or receive a PTT call, your phone automatically determines if the phone you’re calling is able to receive push to send items. Your phone saves this information for Private IDs on your Recent Calls list or stored in Contacts. Your phone updates the saved information each time it’s on a PTT call to that Private ID.Note: You can’t send PTT feature items during Talkgroup calls or SDG calls.Send messagesYou can send short messages through a PTT call.Note: Availability of this feature is dependent on your service provider.You can begin a message during a PTT call, from the Contacts list, the Recent Calls list, or from the PT Manager.•To send a message during a PTT call, press Menu / > Use PTT Feature > Send Message. Write your message and press the PTT Button to send it.
18 Push-to-Talk•To begin a message from Contacts or the Recent Calls list, select the entry containing the Private ID you want to send the message to and press Menu / > Use PTT Feature > Send Message. Write your message, and press the PTT Button to send it.•To begin a message from the PT Manager, press Menu / > Push To Talk > PT Manager > Send Message. Select A Contact or A Recent Call to see a list of entries from Contacts or the Recent Calls list that can receive messages. Select an entry, write your message, and press the PTT Button to send it.Note: The first time you send a message, Messaging Fees May Apply Continue? appears. Press Yes to continue and send your message.Receive messagesWhen you receive a message, a message notification appears on the display.To view the message, press Read.To dismiss the message, press Dismiss.Reply to a message 1View the message.2Press Reply.3Create the message and press the PTT Button to send it.Send picturesYou can send pictures stored in the Media Center through private calls.Note: The first time you send a picture, Picture Fees May Apply Continue? appears. Press Yes to send your picture.To send a picture during a PTT call: 1Press Picture, or press Menu / > Use PTT Feature > Send Pictures.2Select the picture you want to send.3Press the PTT Button to send the picture. When prompted, press the PTT Button to resume the PTT call.To send a picture from the media center: 1Scroll left or right to Media: Pictures.2Select a picture and press Menu / > Send Via... > Send Via PTT. 3Choose A Contact or select a recipient from A Recent Call. 4Press the PTT Button to send the picture. When prompted, press the PTT Button to resume the call.
19Push-to-TalkTo send a picture from the PT Manager: 1Press Menu / > Push To Talk > PT Manager > Send Picture.2Choose A Contact or select a recipient from A Recent Call.3Select Browse Picture, and choose a picture to send.4Press the PTT Button to send the picture. When prompted, press the PTT Button to resume the PTT call.Receive a pictureWhen someone sends you a picture, you hear a tone or your phone vibrates and a message appears asking if you want to accept the picture.Pictures you receive are saved to your phone’s memory. To see them press, Menu / > KMedia Center. See “View pictures” on page 46.When you see a message asking if you want to accept the picture, press Yes to accept or No to decline.Clear a picture from the displayIf you want to clear a picture from your phone’s display while still on a call, press Menu / > Clear Screen.Send a datebook eventYou can also send a Datebook event during a PTT call. 1Press Menu / > Use PTT Feature > Send Event.Note: If this option doesn’t appear, the Private ID you’re engaged in a PTT call with is not able to receive Datebook events.2Choose an existing event, or press New to create a new event.3If the event is a recurring event, select This Event Only to send only the event selected. Select Repeat Events to send all occurrences of the event.4Press the PTT Button to send the event.Send my infoTo send your phone’s contact information through a PTT call:•While in a PTT call, press Menu / > Send Via PTT > Send My Info, and press the PTT Button to send.•From the home screen, press Menu / > Tools > My Info > Menu / > Send My Info via PTT. Enter a Private ID or press Browse to chose a recipient from Contacts, Recent Calls, or Memo. Press the PTT Button to send.
20 Push-to-TalkConfigure my infoYou can control what portion of the information in My Info is sent and whether it is sent automatically in every PTT call or only when you choose to send it.Find it: Menu / > Push To Talk > PT Manager > Configure > PTT My Info > Info to Send 1Select or remove the fields you want to send.2Press Done.The information your phone always sends includes My Name, and Private. You may also send Mobile, Other, IP, Private2, Work1, Work2, Home, Email1, Email2, Fax, and Pager.To control whether My Info automatically sends your information, press Menu / > Push To Talk > PT Manager > Configure > PTT My Info > Auto Send. Select On or Off.Send contact informationYou can send contact information through PTT calls.•To send contact information during a PTT call, press Menu / > Use PTT Feature. Select Send Contact and select the contact you want to send. Press the PTT Button to send the information.•To send a contact from the home screen, press Menu / > Push To Talk > PT Manager > Send Contact. Enter the Private ID number of the recipient or press Browse and select a Private ID from Recent Calls, Contacts, or Memo. Select the contact information you want to send and press the PTT Button to send it.Send location informationUsing your phone’s GPS feature, the following can be shared through PTT calls:•Time stamped latitude/longitude•Relative location or direction and distance from the sender in miles or kilometersFind it: Menu / > Push To Talk > PT Manager > Send Location 1Select A Contact or A Recent Call, and select a recipient.Note: Only contacts and recent calls able to receive your location information will be shown.2Press the PTT Button.Turn PTT features on and offYou can turn on and off your phone’s ability to send and receive messages, pictures, and Datebook events through PTT calls.You can’t turn off your phone’s ability to send and receive My Info and contact information.
21SDG callsTo turn PTT features on and off, press Menu / > Push To Talk > PT Manager > Configure > On/Off PTT Features. PTT features with a check mark next to them are turned on. To turn a feature off, select it. The check mark next to it will disappear. Select the feature again to turn it back on.Unanswered callsIf you receive a PTT call and dismiss it, or make a PTT call that isn’t answered, you can send an automatic text message to the other caller.Find it: Menu / > Push To Talk > PTT Options > Busy Text Response > Incoming PTT or Outgoing PTToptionsOff Turn feature off.Soft Key Press Send Msg to send text message.Automatic Send message automatically without being prompted.SDG callsNeed to talk to more than one person at a time? With SDG (Selective Dynamic Group) calls you can talk to up to 20 people at a time.Note: To store groups on your phone you need a group-call-capable SIM card. Contact your service provider for more information.Create SDG lists in contactsFind it: Menu / > FContacts 1Select [New SDG List].2If you want to assign a name to the SDG list, enter the name.Note: If you do not assign a name, the SDG list is named “SDG” followed by the number of members in the SDG list. For example, “SDG (8)” for an SDG list with eight members.3Add Private IDs.4Press Save.Add Private IDsYou can add Private IDs to an SDG list by selecting them from Contacts, the Recent Calls list, or Memo. You can add all members in an existing SDG list by selecting the list. You can select more than one
22 SDG callsmember from Contacts and the Recent Calls list. A check mark appears next to each selected item. 1While creating an SDG list, select [Add Member] or select [Add Number] and press Browse.If you choose [Add Number] in step one, you can enter a Private ID from the keypad.2Scroll to the members you want from Contacts, the Recent Calls list, or Memo and press r. A check mark appears next to each selected member.3Press Done.Remove members or SDG listsRemove one member from an SDG list 1From Contacts, scroll to the SDG list you want to delete the member from.2Press Edit.3Scroll to the number you want to remove.4Press Menu / > Remove Member.5Press Save.Remove all members from an SDG list 1From Contacts, scroll to the SDG list you want to delete the member from.2Press Edit.3Press Menu / > Remove All Members.4Press Yes to confirm.Delete an SDG list from contacts 1Scroll to the SDG list you want to delete.2Press Menu / > Delete SDG List.Make SDG calls 1From Contacts or the Recent Calls list, scroll to or select the SDG list you want.2Press the PTT Button.Start an SDG call with a Private ID 1From the home screen, enter the Private ID, or from the Contacts list or the Recent Calls list, scroll to an entry containing the Private ID.2Press Menu / > Call SDG.3Add more Private IDs. See “Add Private IDs” on page 21.If you want to save the SDG list you have created, press Menu / > Save SDG, or if you do not want to save the SDG list, press Done.4Press the PTT Button to make the call.
23SDG callsSDG call informationWhile you are in an SDG call, the following appears on the screen:•The name of the SDG list.•The name or the Private ID of the person speaking.•The number of participants in the SDG call.SDG call detailsDuring an SDG call, you can view details about the other SDG list members, such as their name or Private ID, and their status on the call. To view SDG call details, press Details.In the SDG call details view, these icons appear next to member names or Private IDs:iconFThe member of the SDG list who is speaking.EA member of the SDG list who is active on the SDG call, but not speaking.DA member of the SDG list who has exited the call.HA member of the SDG list who could not be reached on the SDG call.GA member of the SDG list whose status is unknown.icon
24 MOTOtalk™MOTOtalk™Note: Availability of this feature is determined by your service provider.Make off-network calls between MOTOtalk enabled phones and Family Radio Service products.Note: Range will vary based on terrain, man-made structures and atmospheric conditions.With MOTOtalk, you don’t need your carrier’s network to stay in touch with friends and family. You can:•Use code or private mode operation•Use up to 10 channels and 15 codes•Communicate with standalone MOTOtalk radiosWhile in MOTOtalk, you’re not using your carrier’s network. Some features are unavailable:•On-network phone or PTT calls•Data transmission•Incoming message notification•Datebook•Call forwarding•Call timers•Call alertsNote: You can’t use MOTOtalk with older Family Radio Service products.Switch to MOTOtalk 1Press Menu / > Push To Talk > MOTOtalk.2Select Go to MOTOtalk.When you see MT Ready, you can begin using MOTOtalk.While in MOTOtalk, this icon 4 is displayed on the status bar.Exit MOTOtalkTo switch to network mode: 1While in MOTOtalk, press Menu / > Push To Talk > MT Options.2Select Exit MOTOtalk.Talk rangeWhile in MOTOtalk mode, phones should be a minimum of 6 feet apart.Channels and codesNote: When making a code call, all parties that are on your code and channel can hear your conversation.Set channels and codesTo set a channel: 1From the MOTOtalk home screen, press Edit.
25MOTOtalk™2Select the channel field, scroll to a channel and press r to select it.3Press Back.To set a code: 1From the MOTOtalk home screen, press Edit.2Select the code field, scroll to a code and press r to select it.3Press Back.Make code callsTo make a code call: 1Press and hold the PTT Button. You’ll see Transmit appear on the display. Begin speaking after you hear the MOTOtalk tone.2Release the PTT Button to listen.If you receive an error message, it may mean:•No one is on your channel or code.•You are out of range.Receive code callsWhen you receive a code call, you'll see Receive. After hearing the MOTOtalk tone, you have 6 seconds to reply before the call times out.To reply to the call, press the PTT Button.Note: A MOTOtalk call can be ended at any time by pressing End/Power @.Receive all MOTOtalk callsIf you set the code to Receive All, your phone can receive MOTOtalk transmissions from any phone that is set to the same channel, regardless of the code (1-15). When you receive transmissions with the code set to Receive All, the code that the transmission was received on will replace Receive All on the display.Note: You cannot initiate a code call when the code is set to Receive All.To set the code to Receive All: 1From the MOTOtalk home screen, press Edit.2Select the code field, scroll to Receive All and press r to select it.3Press Back to return to the MOTOtalk home screen.Press the PTT Button to reply to the call.Private MOTOtalk callsIf you want to have a private conversation without other parties listening in, you can make a private MOTOtalk call. The person you are calling must be in MOTOtalk and set to the same channel to receive your call.
26 MOTOtalk™Private onlyTo set MOTOtalk to ignore code calls, so that you only make or receive private MOTOtalk calls, set your code to Pvt Only.To set the code to Pvt Only: 1From the MOTOtalk home screen, press Edit.2Select the code field, scroll to Pvt Only and press r to select it.3Press Back to return to the MOTOtalk home screen.Make a private MOTOtalk call 1Enter the Personal Telephone Number (PTN) of the person you want to call on your channel. If the PTN is more than 10-digits, enter the last 10-digits of the PTN, or scroll to a number or name in Contacts or the Recent Calls list.2Press and hold the PTT Button. Begin speaking after your phone emits the MOTOtalk tone.3Release the PTT Button to listen.The number or name of the person you are calling will appear in the display.If you receive an error message:•The PTN you entered is invalid.•The person that you are trying to reach is in network mode.•The person that you are trying to reach is set to a different channel.•The person that you are trying to reach is out of range.Receive a private MOTOtalk callThe number or name of the person who is calling appears in the display.To reply, press the PTT Button.End code calls and private MOTOtalk callsCode calls and private MOTOtalk calls will end automatically after 6 seconds of inactivity.The MOTOtalk home screen will display.Note: A private or code MOTOtalk call can be interrupted during the 6 second idle time by another code call or private call.make emergency calls while in MOTOtalkIf you attempt to make an Emergency 911 call while in MOTOtalk mode, your phone will automatically exit MOTOtalk mode and attempt to find a network signal.If you are out of network coverage your phone will not be able to make an emergency 911 cellular call until you go back into the network coverage area.
27MOTOtalk™You must wait until the phone reconnects to the network before attempting to make an emergency 911 cellular call.Setup optionsYou can set up MOTOtalk options on the MT Options screen. You can access this screen in both network and MOTOtalk modes.To access setup options: 1Press Menu / > Push To Talk > MOTOtalk or MT Options.2Select Setup.You can set the following MOTOtalk options:optionsDirect Launch Launch directly into MOTOtalk when you select MOTOtalk from the main menu.State Tone Have an alert sound notify you that you have used MOTOtalk for a specified interval.Direct launchTo set your phone to launch MOTOtalk when you select MOTOtalk from the main menu: 1From the Setup screen, scroll to Direct Launch and press r.2Select On.Note: If Direct Launch is set to On, the MOTOtalk setup options will be unavailable from the main menu. However, you can still access setup options while in MOTOtalk by pressing Menu / > Push To Talk > MT Options > Setup.To turn off Direct Launch: 1From the Setup screen, scroll to Direct Launch and press r.2Select Off.MT Options will now display when you select MOTOtalk from the main menu.State ToneTo set your phone to alert you after you have used MOTOtalk for a specified interval: 1From the Setup screen, scroll to State Tone and press r.2Select the interval after which you want the tone to sound.
28 TalkgroupsFor example, if you select 1 hour, you will be notified every hour that you are in MOTOtalk.To turn off State Tone: 1From the Setup screen, scroll to State Tone and press r.2Select Off.TalkgroupsHave a larger audience than 20 people? Talkgroups are the solution.Note: Availability of Talkgroups, and the maximum number of Talkgroup members, is dependent on your service provider. Contact your service provider to establish a Talkgroup.Join a TalkgroupBefore you can make a Talkgroup call, you’ll need to join the Talkgroup. 1Press Menu / > FContacts.2Select the Talkgroup.3Tou ch Join.Make a Talkgroup call•Enter the Talkgroup number and press the PTT Button.Tip: Talkgroup numbers begin with a #. For example #155.•Press Menu / > FContacts, select the Talkgroup and press the PTT Button.
29Text entryTex t en t ryYour phone provides convenient ways to enter words, letters, punctuation, and numbers whenever you are prompted to enter text (for example, when adding a Contacts entry or when sending a message).Change character input mode 1When you see a screen where you can enter text, press Menu / to change the character input mode.2Select one of the following options:optionsAlpha Press a key one or more times to cycle through the letters and numbers of that key. When you see the character you want, just press another key or wait a second or two to move on.Tip: When entering text, press and hold # to change letter capitalization (Abc > ABC > abc).Word Predictive text – predicts the word you want, with just one keypress per letter. If the prediction is correct, press the Navigation Key right to accept the word. If the prediction is not correct, press and hold the Navigation Key down to see other options. Highlight the correct word and press r to select.Symbols Enter symbols.Numeric Enter numbers.Text Input SettingsSelect the desired entry language and Word Prediction features.Insert Select an item to be inserted, such a picture, an audio clip or a voice recording. Note: Only available when using MMS messaging.options
30 ContactsContactsStore a phone number or Private IDFind it: Menu / > FContacts > [New Contact] 1Enter a name for the new entry. Each entry’s name can contain 20 characters.2Select a ring tone.3Select a type for the entry (Mobile, Private1, Private2, Work1, Work2, Home, Email, Email2, Fax, Pager, Talkgroup, SDG, Msg Group, IP, or Other). Choose Private1 or Private2 to store a Private ID.4Enter the number for the entry and press Save.Call a stored phone number or Private IDFind it: Menu / > FContacts 1Scroll to the Contacts entry.2If the Contacts entry contains more than one number, scroll left or right until the type of number you want to call is displayed (such as Mobile, Private1, Private2, Work1, Work2, Home).3If you chose a phone number, press Talk ` to begin a call. If you chose a Private ID, Talkgroup ID, or SDG list, press and hold the PTT Button to start a call.MessagingFind it: Menu / > PMessagesYour phone can use SMS and Multimedia Messaging service messaging. The type of messaging your phone uses is determined by your service provider.Create & send messagesFind it: Menu / > PMessages > [Create Message] 1Enter the phone number of the person you want to send the message to and press r, or press Search to select a contact or recent call.2Enter your message in the Message field.3Insert (embed) or attach a picture, sound, or quick note.•Quick notes are short, pre-written phrases. Press QNotes to enter a quick note.•To insert pictures, sounds, (audio files), or voice recordings into the body of your message, press Menu / > Insert > Insert QNotes, Insert Picture, Insert Audio, Insert Video, Capture Video, Capture Picture, or Record Voice.Note: You can insert one item at a time. To remove an item from a message, highlight it and press Delete.
31Messaging•To attach a file to the end of your message, select ....MORE.... > Attach > [New Attach] > Browse Pictures, Capture Pictures, Browse Audio, Record Voice, Browse Video, or Record Video.Note: You can only attach pictures and audio files if they’re not forward locked and if they’re not DRM-protected.Tip: To remove an attachment, select Attach. Select the attachment to remove, and press Menu / >Unattach.Note: You cannot attach or insert pictures, sounds (audio files), or voice records in SMS messages. These features are only available with MMS messaging.4When finished writing your message, press r.5To send the message, press Send.Receive messagesWhen you receive a message, your phone plays an alert and shows a notification.•To view the message, press Read.•To dismiss the message notification, press Exit.To read your messages later, press Menu / > PMessages > Inbox.Tip: While viewing a message, press the Navigation Key left or right to scroll through your messages.Manage received messagesfeaturesforward a messageHighlight the message and press Menu / > Forward.Embedded objects and attachments are also forwarded.reply to a messageOpen the message and press Reply to reply to the sender only.For MMS messages you can also reply to all recipients: Press Menu / and select Reply All.Select [Create Reply] to create your message, or select a short phrase from the list.view, play, or open an embedded object or attachmentHighlight the embedded picture or audio file to view or play it.For attachments, press r.Note: Attachments of an unknown type cannot be opened, but can be deleted.
32 MessagingMultimedia message optionsMultimedia messages (MMS) can contain text, pictures, and audio files. When you create an MMS message you have more options than for a simple text message.save an embedded objectHighlight the picture or audio file and press Menu / > Save Picture or Save Audio.save an attachmentHighlight the attachment and press Menu / > Save Attachment.delete an embedded object or attachmentHighlight the embedded picture, audio file, or attachment and press Menu / > Delete Picture, or Delete Audio, or Delete Attachment.delete a messageHighlight the message and press Delete and then Yes to confirm.features When creating the message, select ....MORE.... for these options:Manage your messagesCleanup messagesSet how long and/or how many messages are stored in the inbox and sent items folders. This feature deletes only read messages, unlocked messages, and sent messages.optionsSubject Create or edit the subject line.Attach Attach a picture, audio file, or voice record.Cc Send a copy of the message to someone else.Auto Replies Create a list of short answers for the recipient to choose when replying to your message.Priority Set priority Normal or High.Valid Until Set the date after which attempts to deliver the message end, or press No Date.
33MessagingFind it: Menu / > PMessages, press Menu / > Setup > Cleanup 1Select Inbox or Sent Items.2Chose a cleanup option from the following list:optionsOff Messages are never automatically deleted.5 Messages Messages are deleted in the order they were received, starting with the oldest, until five are left.10 Messages Messages are deleted in the order they were received, starting with the oldest, until 10 are left.1 Day Messages are deleted if they’re older than one day.3 Days Messages are deleted if they are older than three days.FirstIn FirstOutMessages are deleted as necessary on a first-in first-out basis.3Press Yes to automatically delete messages now, or press No to delete messages later.Message threadsIf message threads are supported by your service provider, you can organize your messages by subject or sender.Find it: Menu / > PMessages, press Menu / > Threading > None, Subject, or SenderNote: Threading by subject is only available with Multimedia messages.Edit & send draftsSave unsent messages are stored in the drafts folder.Find it: Menu / > PMessages > Drafts 1To edit a draft, select it to open it. You can change or add recipients, and edit the message.Custom Specify cleanup settings of up to 199 messages or 99 days for the inbox and sent items.options

Navigation menu