Motorola Mobility A56AJ1 800 / 1900 MHz Dual Band Linear RF Compensator User Manual

Motorola Mobility LLC 800 / 1900 MHz Dual Band Linear RF Compensator

Contents

Exhibit D Users Manual per 2 1033 c3

MOTOROLA, INC. FCC ID: IHDA56AJ1 Page 1 of 2 800 / 1900 MHZ DUAL BAND LINEAR RF COMPENSATOR MODEL # SYN8486A USER MANUAL 1. OVERVIEW The 800 / 1900 MHz Dual Band Linear RF Compensator is a bi-directional, dual band RF amplifier used in conjunction with either a dual band or a standard single band mobile phone. It compensates for signal attenuation in both transmit and receive paths due to antenna and cable losses employed in automotive OEM installations. This will help to improve call quality in weak coverage areas and reduce dropped calls in between cell sites. The compensator operates in both analog and digital modes. 2. ANTENNA INSTALLATION To meet the FCC’s and IC’s RF Exposure Guidelines, the antenna should be installed so there is at least 20 cm of separation between the body of the user or nearby persons and the antenna. All installations are done at the factory. There is no end-user installation is involved. Any unauthorized changes or modifications not expressly approved by the party responsible for compliance could void user’s authority to operate this equipment. 3. I/O CONNECTION Portable and antenna port: mini UHF type connectors. DC input and various control signals: 14-pin connector. 4. SPECIFICATIONS FCC ID IHDA56AJ1 FCC Rule Parts 22 & 24 IC Certification Number 10931128A IC Radio Standards Specification RSS-131 Model Number SYN8486A Operating Frequency TX: 824-849 MHz 1850-1910 MHz RX: 869-894 MHz 1930-1990 MHz Channeling Single channel Mode of Transmission Analog & Digital Data Source External
MOTOROLA, INC. FCC ID: IHDA56AJ1 Page 2 of 2 Type of Modulation AMPS (analog) CDMA (digital) GSM (digital) TDMA (digital) Type of Information Telephony & Data Occupied Bandwidth Requirement AMPS: 30 KHz CDMA: 1.23 MHz GSM: 300 KHz TDMA: 30 KHz Input Power TX: 25 dBm max Output Power TX: 27 dBm Nominal Gain Cellular: TX: 824-849 MHz: 9 dBm PCS: TX: 1850-1910 MHz: 15 dBm Harmonics & Spurious FCC, IC & TIA / EIA specifications Stability Any RF load condition DC Supply Voltage 9 to 16.5 V Current Draw 1.5A max RF Load VSWR Full power at better than 2:1 VSWR Operating Temp: -30 to 60°C Storage Temp -40 to 90°C

Navigation menu