Mossloo MSLW178Q Glisten 4000 mAh Light Up Wireless Powerbank User Manual gai2

Shenzhen Mossloo Industrial Co.,Ltd Glisten 4000 mAh Light Up Wireless Powerbank gai2

Contents

User Manual

MADE IN CHINAFCC WARNING STATEMENTGlisten 4000 mAh Light Up Wireless Powerbank Instruction Manual1 x 4000 mAh wireless Power Bank1 x 2-in-1 charging cable (see above diagram)1 x Instruction Manual4000 mAh/3.7V/14.8WHUSB Input: DC 5V/2AUSB Output: DC 5V/2AWireless Output: 5V/1AON/OFF Button: Press once to view the remaining power capacity.Will illuminate whenever the power bank charges or discharges.Charge the power bank fully before initial use.The unit’s full performance is achieved only after 2 or 3 completed charge and discharge cycles.To reduce the risk of injury, close supervision is necessary when the product is used near children.Do not expose the device to moisture.Do not use the device in excess of its output rating. Overload outputs above Do not use the device if damaged or explosion or risk of injury.Do not disassemble the device. Take it to or repair is required. Incorrect reassembly or temperatures above 212ºF may cause explosion. repair person using only identical replacement parts. Do not overcharge Phone. Unit may get hot with excessive use. Remove Phone when it is fully charged. Never charge for more than 7 hours at a time.2.3.4.5.6.7.8.9.10.11. • • • • • • What’s included:Features:LED Indicators:Light Panel: WARNING–When using this product, basic precautions should always be followed, including the following:Read all the instructions before using the product.1.SAFETY PRECAUTIONS:1.2.3.4.5.Wireless Charging PadMicro USB InputUSB OutputLED IndicatorON/OFF ButtonCharging the power bank:Charge the power bank fully before usage.Using 2-in-1 charging cable, insert the USB USB port of a computer, insert the 2-in-1 tip (the side with pins upwards) into power bank micro input. Then charge begins. BLUE, and will stop when once fully charged.Charging mobile phones and other electronic devices:Connect the 2-in-1 cable to your mobile phone/device. If Android device, the tip with pins upwards; If iOS device, the tip without pins upwards. Connect the other end to the power bank. Device will begin to charge automatically.Remove the USB cable from your mobile device when it is fully charged.Charging Mobile phones and other electronic devices with wireless output.Press and hold the ON/OFF button, LED indicator will show Green once the powerbank is in wireless charging standby mode.Place wireless charging enable device onWireless Charging Pad. The device will begin to charge, LED indicator will turn RED when charging.Note: In order to charge devices, use only the accessory cable or the cable included with your own device by the manufacturer.1. a. b. c.2. a. b.3. a. b.*Instructions:WIRELESS CHARGING ENABLEDDEVICES:iPhone 8/8Plus/X, Samsung Galaxy S8/S8+/S7/S7 Edge/S6/S6 Edge, Nokia Lumia 1020/920/928, HTC 8X, HTC Droid DNA, HTC Rzound, HTC Incredibly 4G LTE, Moto Droid Turbo, Motorola Moto 360 Smart Watch, Moto Droid Maxx, Droid Mini, Google Nexus 6/4/5/7 (2013), LG D1L, LG LTE2, LG G2 (Verizon), Blackberry Z30 (Verizon)This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.This equipment has been tested and foundto comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules.These limits are designed to providereasonable protection against harmfulinterference in a residential installation.This equipment generates uses and canradiate radio frequency energy and, if notinstalled and used in accordance with theinstructions, may cause harmful interferenceto radio communications. However, there isno guarantee that interference will not occurin a particular installation. If this equipmentdoes cause harmful interference to radio ortelevision reception, which can be determinedby turning the equipment off and on, the useris encouraged to try to correct the interferenceby one or more of the followingmeasures:‐Reorient or relocate the receiving antenna.‐Increase the separation between the equipment and receiver.‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.‐Consult the dealer or an experienced radio/ TV technician for help.

Navigation menu