Mitsumi Electric Co WLPS3 VoIP Mobile Phone Terminal User Manual UGform

Mitsumi Electric Co Ltd VoIP Mobile Phone Terminal UGform

Contents

Users Manual 2

- 37 - • CALL VOLUMEFactory Default:5You can adjust receiver volume. - Press key in standby mode. - The phone displays the Main Menu.- Press key to select “04. Setup Menu” and thenpress key.- The phone displays the Setup Menu.- Press key to select “02. Sound&Vibrator”.- Press key. Sound&Vibrator menu appears.- Press key to select “06. Call Volume” and thenpress key.- Call Volume can be set in eight levels (0 - 7). Selecta desired volume by using key and then press key.MenuAM 12:58OK ExitMenu02. Directory03. Speed Dial01. Call history04. Setup MenuAM 12:58Enter BackSetup Menu02. Sound&Vibrator03. Setup Time01. Display settingFunc04. Password05. 言語設定Ongoing call will not be affected by thissetting.AM 12:58OK BackSound&Vibrator04. Private Call05. Ring Volume03. Internal Call06. Call VolumeAM 12:58OK BackCall VolumeVolume (0 - 7)
- 38 - •KEY CLICKFactory Default: OffYou can sound or mute a tone that is provided when anykey is pressed on the phone. - Press key in standby mode. - The phone displays the Main Menu.- Press key to select “04. Setup Menu” and thenpress key.- The phone displays the Setup Menu.- Press key to select “02. Sound&Vibrator”.- Press key. Sound&Vibrator menu appears.- Press key to select “07. Key Click” and thenpress key.- Select ON or OFF by using key and then press key.MenuAM 12:58OK ExitMenu02. Directory03. Speed Dial01. Call history04. Setup MenuAM 12:58Enter BackSetup Menu02. Sound&Vibrator03. Setup Time01. Display settingFunc04. Password05. 言語設定Volume adjustment or sound modificationis not available for Key Click.AM 12:58OK BackSound&Vibrator05. Ring Volume06. Call Volume04. Private Call07. Key ClickAM 12:58OK BackKey ClickOffOn
- 39 - • MUSIC SELECTFactory Default:Data-1 (Minuet)You can select music that is provided while the phoneis in hold status. - Press key in standby mode. - The phone displays the Main Menu.- Press key to select “04. Setup Menu” and thenpress key.- The phone displays the Setup Menu.- Press key to select “02. Sound&Vibrator”.- Press key. Sound&Vibrator menu appears.- Press key to select “07. Key Click” and thenpress key.- Select Data-1 or Data-2 by using key and thenpress key.MenuAM 12:58OK ExitMenu02. Directory03. Speed Dial01. Call history04. Setup MenuAM 12:58Enter BackSetup Menu02. Sound&Vibrator03. Setup Time01. Display settingFunc04. Password05. 言語設定Data-1: Minuet (default) and Data-2: ForElise.AM 12:58OK BackSound&Vibrator06. Call Volume07. Key Click05. Ring Volume08. Music SelectAM 12:58OK BackMusic SelectData-2Data-1
- 40 - • RTP ALARMFactory Default: OffThe phone can provide alarm if RTP packet loss issuspected. Note Note: If RTP packet loss exceeds a predeterminedvalue, this alarm is provided. - Press key in standby mode. - The phone displays the Main Menu.- Press key to select “04. Setup Menu” and thenpress key.- The phone displays the Setup Menu.- Press key to select “02. Sound&Vibrator”.- Press key. Sound&Vibrator menu appears.- Press key to select “07. Key Click” and thenpress key.- Select ON or OFF by using key and then press key.MenuAM 12:58OK ExitMenu02. Directory03. Speed Dial01. Call history04. Setup MenuAM 12:58Enter BackSetup Menu02. Sound&Vibrator03. Setup Time01. Display settingFunc04. Password05. 言語設定AM 12:58OK BackSound&Vibrator07. Key Click08. Music Select06. Call Volume09. RTP AlarmAM 12:58OK BackRTP AlarmOffOn
- 41 - • H.O. TONEFactory Default: OffThe phone can provide warning tone when handovertakes place.- Press key in standby mode. - The phone displays the Main Menu.- Press key to select “04. Setup Menu” and thenpress key.- The phone displays the Setup Menu.- Press key to select “02. Sound&Vibrator”.- Press key. Sound&Vibrator menu appears.- Press key to select “07. Key Click” and thenpress key.- Select ON or OFF by using key and then press key.Handover is ...MenuAM 12:58OK ExitMenu02. Directory03. Speed Dial01. Call history04. Setup MenuAM 12:58Enter BackSetup Menu02. Sound&Vibrator03. Setup Time01. Display settingFunc04. Password05. 言語設定AM 12:58OK BackSound&Vibrator08. Music Select09. RTP Alarm07. Key Click10. H.O. ToneAM 12:58OK BackH.O. ToneOffOn
- 42 - • DATE AND TIME ADJUSTMENTDate and time information of the phone can be adjustedas required.- Press key in standby mode. - The phone displays the Main Menu.- Press key to select “04. Setup Menu” and thenpress key.- The phone displays the Setup Menu.- Press key to select “03. Setup Time”.- Press key. Sound&Vibrator menu appears.- Press key to select “01. Adjust DATE&TIME”and then press key.- Select an item you want to change by using keyand then press key.Note: The last two digits of the year informationonly can be modified (20??).MenuAM 12:58OK ExitMenu02. Directory03. Speed Dial01. Call history04. Setup MenuAM 12:58Enter BackSetup Menu02. Sound&Vibrator03. Setup Time01. Display settingFunc04. Password05. 言語設定AM 12:58OK BackSetup Time02. DATE FORMAT03. TIME FORMAT01. Adjust DATE&TIME04. Daylight savingAM 12:58OK BackAdjust DATE&TIMEDate (yyyy/mm/dd)Time21:462007/01/01
- 43 - •DATE FORMATFactory Default: yyyy/mm/ddDate format (yyyy/mm/dd, mm/dd/yy, or mm/dd) canbe changed as required.- Press key in standby mode. - The phone displays the Main Menu.- Press key to select “04. Setup Menu” and thenpress key.- The phone displays the Setup Menu.- Press key to select “03. Setup Time”.- Press key. Sound&Vibrator menu appears.- Press key to select “02. DATE FORMAT” andthen press key.- Select a date format by using key and then press key.MenuAM 12:58OK ExitMenu02. Directory03. Speed Dial01. Call history04. Setup MenuAM 12:58Enter BackSetup Menu02. Sound&Vibrator03. Setup Time01. Display settingFunc04. Password05. 言語設定AM 12:58OK BackSetup Time02. DATE FORMAT03. TIME FORMAT01. Adjust DATE&TIME04. Daylight savingAM 12:58OK BackDATE FORMAT(yyyy/mm/dd)mm/ddmm/dd/yy
- 44 - •TIME FORMATFactory Default: 12-hourTime format (12-hour/24-hour) can be selected asrequired.- Press key in standby mode. - The phone displays the Main Menu.- Press key to select “04. Setup Menu” and thenpress key.- The phone displays the Setup Menu.- Press key to select “03. Setup Time”.- Press key. Sound&Vibrator menu appears.- Press key to select “03. TIME FORMAT” andthen press key.- Select a time format by using key and then press key.MenuAM 12:58OK ExitMenu02. Directory03. Speed Dial01. Call history04. Setup MenuAM 12:58Enter BackSetup Menu02. Sound&Vibrator03. Setup Time01. Display settingFunc04. Password05. 言語設定AM 12:58OK BackSetup Time02. DATE FORMAT03. TIME FORMAT01. Adjust DATE&TIME04. Daylight savingAM 12:58OK BackTIME FORMAT24 hour12 hour
- 45 - • DAYLIGHT SAVINGFactory Default:OffDaylight saving can be used as required.- Press key in standby mode. - The phone displays the Main Menu.- Press key to select “04. Setup Menu” and thenpress key.- The phone displays the Setup Menu.- Press key to select “03. Setup Time”.- Press key to open Sound&Vibrator menu.- Press key to select “04. Daylight saving” andthen press key.- Select On or Off by using key and then press key.MenuAM 12:58OK ExitMenu02. Directory03. Speed Dial01. Call history04. Setup MenuAM 12:58Enter BackSetup Menu02. Sound&Vibrator03. Setup Time01. Display settingFunc04. Password05. 言語設定AM 12:58OK BackSetup Time02. DATE FORMAT03. TIME FORMAT01. Adjust DATE&TIME04. Daylight savingAM 12:58OK BackDaylight savingOffOn
- 46 - • TIME ADJUSTMENT MEANSFactory Default: Real Time Clock (RTC)The phone can use one of the following to adjust thetime information. In default, time adjustment will notbe performed.•RTC• SIP server• SNTP server- Press key in standby mode. - The phone displays the Main Menu.- Press key to select “04. Setup Menu” and thenpress key.- The phone displays the Setup Menu.- Press key to select “03. Setup Time”.- Press key to open Sound&Vibrator menu.- Press key to select “05. Adjust” and then press key.- Select “01. Means” by using key and then press key.- Select an appropriate item by using key and thenpress key.MenuAM 12:58OK ExitMenu02. Directory03. Speed Dial01. Call history04. Setup MenuAM 12:58Enter BackSetup Menu02. Sound&Vibrator03. Setup Time01. Display settingFunc04. Password05. 言語設定AM 12:58OK BackSetup Time03. TIME FORMAT04. Daylight saving02. DATE FORMAT05. AdjustAM 12:58OK BackAdjust02. SNTP adjust at03. Time offset01. MeansAM 12:58OK BackMeans02. SIP server03. SNTP01. AirStar (RTC???)
- 47 - • SNTP QUERY TIMEFactory Default: 00:00:00The phone attempts to connect the SNTP server at thespecified time to adjust the time information.- Press key in standby mode. - The phone displays the Main Menu.- Press key to select “04. Setup Menu” and thenpress key.- The phone displays the Setup Menu.- Press key to select “03. Setup Time”.- Press key to open Sound&Vibrator menu.- Press key to select “05. Adjust” and then press key.- Select “02. SNTP adjust at” by using key andthen press key.- Set appropriate time and then press key.MenuAM 12:58OK ExitMenu02. Directory03. Speed Dial01. Call history04. Setup MenuAM 12:58Enter BackSetup Menu02. Sound&Vibrator03. Setup Time01. Display settingFunc04. Password05. 言語設定AM 12:58OK BackSetup Time03. TIME FORMAT04. Daylight saving02. DATE FORMAT05. AdjustAM 12:58OK BackAdjust02. SNTP adjust at03. Time offset01. MeansAM 12:58OK BackSNTP adjust at00:00Adjust at
- 48 - • TIME OFFSETFactory Default: +9:00The phone can set time offset in the range of -12:00 to+ 14:00, which specifies time offset between GMT andthe user’s area.- Press key in standby mode. - The phone displays the Main Menu.- Press key to select “04. Setup Menu” and thenpress key.- The phone displays the Setup Menu.- Press key to select “03. Setup Time”.- Press key to open Sound&Vibrator menu.- Press key to select “05. Adjust” and then press key.- Select “03. Time offset” by using key and thenpress key.- Set appropriate time offset and then press key.MenuAM 12:58OK ExitMenu02. Directory03. Speed Dial01. Call history04. Setup MenuAM 12:58Enter BackSetup Menu02. Sound&Vibrator03. Setup Time01. Display settingFunc04. Password05. 言語設定AM 12:58OK BackSetup Time03. TIME FORMAT04. Daylight saving02. DATE FORMAT05. AdjustAM 12:58OK BackAdjust02. SNTP adjust at03. Time offset01. MeansAM 12:58OK BackTime offset-11:00-12:00:-1:00+0+1:00:+14:00
- 49 - •PASSWORDFactory Default: 0123 (User)/9999 (Admin.)The phone can set a password for User andAdministrator respectively.The administrator password is used for networkadministrator, or maintenance personnel.- Press key in standby mode. - The phone displays the Main Menu.- Press key to select “04. Setup Menu” and thenpress key.- The phone displays the Setup Menu.- Press key to select “04. Password”.- Press key to open Password menu.- Select an appropriate item by pressing key andthen press key.- Enter the old password and then press key.- Enter the new password and then press key.- Enter the new password again and then press key.MenuAM 12:58OK ExitMenu02. Directory03. Speed Dial01. Call history04. Setup MenuAM 12:58Enter BackSetup Menu02. Sound&Vibrator03. Setup Time01. Display settingFunc04. Password05. 言語設定AM 12:58OK BackPassword02. Administrator01. User05. AdjustAM 12:58OK BackOld Password****123AM 12:58OK BackNew Password****123AM 12:58OK BackInput again****123
- 50 - • LANGUAGEFactory Default: EnglishThe information on the LCD can be displayed inEnglish or Japanese. You can switch between the twolanguages by the following operation.- Press key in standby mode. - The phone displays the Main Menu.- Press key to select “04. Setting” and then press soft key.- The phone displays the Setting menu.- Press key to select “05. 言語設定 ”.- Press soft key to open Language menu.- Select an appropriate language by pressing keyand then press soft key.MenuOKAM 12:58OK BackMenu02. Phone Book03. Speed Dial01. Call Log04. SettingAM 12:58OK BackSetting02. Sounds03. Dates & Time01. Display04. Password05. 言語設定OKOKCurrent language setting is indicated by acheck box on the right side.AM 12:58OK Back言語設定English日本語05. Adjust
- 51 - 9.LOCAL INFOYou can see the local information of the phone such asPhone Number, IP Address, Version, and MACAddress. • TO DISPLAY LOCAL INFO- Press key in standby mode. The phonedisplays the Main Menu.- Press key to select “05. Local info” and thenpress key.- The phone displays the local information (General)similar to the following.- Press key to view the detailed informa-tion. To return to the general information, press key.MenuAM 12:58OK ExitMenu03. Speed Dial04. Setup Menu02. Directory05. Local infoDetailBackAM 12:58BackLocal information987123123IP AddressPhone number:Detail192.168.0.36Local Information (General)AM 12:58BackLocal informationAS-N-0.9.1RF-KS-8.7Version:MAC Address:Local Information (Detail)00:00:00:20:8C:9E
- 52 - 10.LOCK/UNLOCKYou can lock the phone against unauthorized usage.This is also useful for guarding the phone againstinadvertent button presses. • TO LOCK THE PHONE- Press key in standby mode. The phonedisplays the Main Menu.- Press key to select “06. Lock/Unlock” and thenpress key.- Enter your User Password (4 digits) by using dialpad and then press key.- The phone is locked and a lock icon appears.Note: Each number is indicated by a * on the phone.• TO UNLOCK THE PHONE- Press key in standby mode. - The phone displays the password entry screen.- Enter your User Password (4 digits) by using dialpad and then press key.- The phone displays the Main Menu. Press key toselect “06. Lock/Unlock” and then press key.- The phone is unlocked and the lock icon disap-pears.MenuAM 12:58OK ExitMenu07. Change presence08. Short Message06. Lock/Unlock09. MaintenanceAM 12:58OK ExitPassword* * * * 2007/01/0112:00Profile1AM 12:58Menu ProFFunc2007/01/0112:00Profile1AM 12:58Func ProFAM 12:58OK BackPassword* * * *123AM 12:58OK ExitMenu07. Change presence08. Short Message06. Lock/Unlock09. Maintenance
- 53 - 2007/01/0112:00Profile1AM 12:58Func ProF
- 54 - 11.PRESENCEYou can set the current Presence information such ason-line, on the phone, in a meeting, out to lunch fromyour phone. • TO CHANCE PRESENCE- Press key in standby mode. The phonedisplays the Main Menu.- Press key to select “07. Change presence” andthen press key.- The phone displays the Change Presence Menu.- Press key to select an appropriate presence.- Press key to change your presence to theselected status.• TO VIEW PRESENCE- Press key in standby mode. The phonedisplays the Main Menu.- Press key to select “02. Directory”. - The phone displays the following.- Press key to select an entry you want to see. Toview the presence, a letter ‘P’ must be indicated onthe right side of the entry.- Press key or key to view the pres-ence.- The information of the selected entry is displayed.MenuAM 12:58OK ExitMenu05. Local info06. Lock/Unlock04. Setup Menu07. Change presenceAM 12:58Edit BackChange Presence02. absent03. on the phone01. on-lineSave04. in a meeting05. on a breakSaveA letter P is added when the person is atarget of PRESENCE feature.MenuAM 12:58OK ExitMenu02. Directory03. Speed Dial01. Call history04. Setup MenuAM 12:58OK FindDirectory02. Aaron03. Julia01. BenFunc04. Paul05. Rachel06. James07. HannahPPPPMenu
- 55 - AM 12:58BackDirectory03. 9752111104. TEL202. Benjamin01. Benin a meeting06. Note07. Group 105. TEL308. Entry presence
- 56 - 12.SHORT MESSAGEThe phone can send/receive short messages (instantmessages). • SHORT MESSAGE INDICATIONWhen you receive a message, the phone displays icon as shown below. This is an indication that youhave received a message.• TO VIEW SHORT MESSAGE- Press key in standby mode. The phonedisplays the Main Menu.- Press key to select “08. Short Message” and thenpress key.- The phone displays the Short Message menu.- Press key to select “01. Inbox”or “02. Outbox”.- Press key to open “Inbox/Outbox” menu.- Press key to select a message you want to readand then press key.- The contents of the selected message will be dis-played. .2007/01/0112:00Profile1AM 12:58Func ProFMenuAM 12:58OK ExitMenu06. Lock/Unlock07. Change presence05. Local info08. Short MessageAM 12:58OK BackShort Message02. Outbox03. Draft01. Inbox04. WriteAM 12:58Enter BackInbox02. 98712341203. Bartholomew01. JoshuaFuncAM 12:58Enter BackJoshuaI’ve just arrived in London.Here, I will join the confeHi, Mike!Funcrence you said yesterday
- 57 - • TO SEND A SHORT MESSAGE- Press key in standby mode. The phonedisplays the Main Menu.- Press key to select “08. Short Message” and thenpress key.- The phone displays the Short Message menu.- Press key to select “04.Write.”- Press key to open “Write” menu.-番号をダイヤル .- Press key and then write your message.- Press key to send the message to the specifiednumber.MenuAM 12:58OK ExitMenu06. Lock/Unlock07. Change presence05. Local info08. Short MessageAM 12:58OK BackShort Message02. Outbox03. Draft01. Inbox04. WriteAM 12:58Enter BackWriteNumber:Func987654321AM 12:58Enter BackWriteHow are you?Did you read my messageHi, Steve!FuncSend us the information of
- 59 -13.TECHNICAL SPECIFICATIONS• TECHNICAL SPECIFICATIONSThe following shows the technical specifications.Table 2 MH2500 SpecificationsWireless Interface IEEE802.11bRCR STD-33/ARIB STD-T66Codec G.711, G.729aPayload Size: 20ms, 30ms, 40msControl Protocol SIP (RFC3261) + NEC expansionLCDMain FeaturesRingerBatteryOperating Temperature 0-40Operating Humidity 20-90% (notDimension with antenna 98.0 * 47.6 * 25.6mmWeight approximately 100g (inclusive of the battery)

Navigation menu