Mitsumi Electric Co DWMW015 Wireless LAN Module User Manual 2

Mitsumi Electric Co Ltd Wireless LAN Module Users Manual 2

Users Manual 2

User ManualMITSUMI WiFi ModuleMODEL DWM-W015The purpose of this manual is to explain correct way how to integrate module DWM-W015 to theend product. It includes procedures that shall assist you to avoid unforeseen problems. This manualpresents information that shows how module and OEM product, where module integrated, complieswith regulations in certain regions. Any modifications, not expressly approved by the manufacturercould void the authority to operate in these regions.The MITSUMI WiFi Module, model DWM-W015 has to be installed and used in accordance with thetechnical description/installation instructions provided by the manufacturer.For detail information concerning type approval of this module (e.g. where this module is alreadypre-approved) please contact the authorized local distributor or the manufacturer.The system may only be implemented in the configuration that was authorized. Note that anychanges or modifications to this equipment not expressly approved by the manufacturer could voidthe user’s authority to operate this equipment.
Regulatory InformationOperational InformationWireless InteroperabilityThe end product integrating this module is designed to be interoperable with any wireless LANproduct that is based on direct sequence spread spectrum (DSSS) and orthogonal frequencydivision multiplexing (OFDM) radio technology and to comply with the following standards.・IEEE Std 802.11b Standard on 2.4GHz Wireless LAN・IEEE Std 802.11g Standard on 2.4GHz Wireless LAN・IEEE Std 802.11 Standard on 2.4GHz Wireless LANSafetyThe end product integrating this module, like other radio devices, emits radio frequencyelectromagnetic energy. The level of energy emitted by this device, however, is less than theelectromagnetic energy emitted by other wireless devices such as mobile phones. The end productintegrating this module operates within the guidelines found in radio frequency safety standards andrecommendations. These standards and recommendations reflect the consensus of the scientificcommunity and result from deliberations of panels and committees of scientists who continuallyreview and interpret the extensive research literature. In some situations or environments, the use ofthe end product integrating this module may be restricted by the proprietor of the building orresponsible representatives of the applicable organization. Examples of such situations include thefollowing:・Using the end product integrating this module onboard airplanes, or・Using the end product integrating this module in any other environment where the risk ofinterference with other devices or services is perceived or identified as being harmful.If uncertain of the policy that applies to the use of wireless devices in a specific organization orenvironment (an airplane, for example), ask for authorization to use the end product integrated intothis module before turning it on.
USA-Federal Communications Commission (FCC)This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses, and canradiate radio frequency energy. If not installed and used in accordance with the instructions, it maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can bedetermined by tuning the equipment off and on, the user is encouraged to try and correct theinterference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the distance between the equipment and the receiver.-Connect the equipment to outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may causeundesired operation.Any changes or modifications not expressly approved by the party responsible for compliance couldvoid the user’s authority to operate the equipment.LabelingMITSUMI WiFi module DWM-W015 labeled as below.FCC ID: EW4DWMW015The proposed with FCC ID label format is to be placed on the module. If FCC ID is not visible whenthe module is installed into the system, “Contains FCC ID: EW4DWMW015” shall be placed on theoutside of final host system.Caution: Exposure to Radio Frequency Radiation.To comply with FCC RF exposure compliance requirements, this device must not be co-located oroperating in conjunction with any other antenna or transmitter.
Canada-Industry Canada (IC)This device complies with RSS-210 of Industry Canada.Operation is subject to the following two conditions:(1) This device may not cause interference, and(2) This device must accept any interference, including interference that may cause undesiredoperation of this device.L ‘ utilization de ce dispositif est autorisée seulement aux conditions suivantes :(1) il ne doit pas produire de brouillage et(2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si cebrouillage est susceptible de compromettre le fomctionnement du dispositif.The term “IC” before the equipment certification number only signifies that the Industry Canadatechnical specifications were met.To reduce potential radio interference to other users, the antenna type and its gain should be sochosen that the equivalent isotropic radiated power (EIRP) is not more than that required forsuccessful communication.To prevent radio interference to the licensed service, this device is intended to be operated indoorsand away from windows to provide maximum shielding. Equipment (or its transmit antenna) that isinstalled outdoors is subject to licensing.Pour empecher que cet appareil cause du brouillage au service faisant l’objet d’une licence, il doitetre utilize a l’interieur et devrait etre place loin des fenetres afinde Fournier un ecram de blindagemaximal. Si le matriel (ou son antenne d’emission) est installe a l’exterieur, il doit faire l’objet d’unelicence.Caution: Exposure to Radio Frequency Radiation.The installer of this radio equipment must ensure that the antenna is located or pointed such that itdoes not emit RF field in excess of Health Canada limits for the general population; consult SafetyCode 6, obtainable from Health Canada’s website at www.hc-sc.gc.ca/rpb.

Navigation menu