Mitsubishi Electric CP-D90DW Digital Color Printer User Manual 4

Mitsubishi Electric Corp Digital Color Printer 4

User Manual-4

21PREPARATION TROUBLE-SHOOTINGFEATURESPRECAUTIONS OTHERS CONTENTSVENTILATION INLET CLEANINGClean the ventilation inlets on the front and both sides of the printer with a vacuum as shown right.THERMAL HEAD CLEANING Press the OPEN button to open the printing unit. Take the ink cassette out of the printer.PreparationsAlcohol (ethyl alcohol, etc.)Soft and clean clothOther : Cleaning ribbon (option)** Please ask the dealer about options.When lines appear on the printed images, clean the thermal head. Wipe the head cleaning part (as shown right) carefully with cloth dampened with a small amount of alcohol.• Do not damage the thermal head.• When the poor print quality is not corrected even if the head has been cleaned, replacement of the thermal head may be required. Contact your dealer.NOTEThermal head is hot right after printing. Wait until the head cools before cleaning the thermal head.CAUTION The thermal head may be damaged if you touch it while static electricity builds up on your body.NOTE• When you clean the thermal head, make sure not to apply excessive force to the peeling roller on the bottom of the thermal head. When the excessive force is applied to the roller, the roller may be deformed, resulting in deterioration of the printing quality.NOTE WHEN USING THE CLEANING RIBBON (CR-D70)When you use print paper of 152 mm (6”) width after using that of 127 mm (5”), thermal head cleaning with a cleaning ribbon may be required.If one or two lines appear on the printing surface as shown in the illustration when printing on the print paper of 152 mm (6”) width, clean the thermal head using the optional cleaning ribbon. Print paper of 127 mm(5”) width : 9x13 (3.5x5”), 13x18 (5x7”) Print paper of 152 mm (6”) width : 10x15 (4x6”), 15x20 (6x8”), 15x23 (6x9”)• When the symptom of poor print quality is not corrected even after the head is cleaned, replace the thermal head. Contact your dealer.NOTEVentilation inlets Ventilation inletCleaning part of thermal headThermal headPeeling rollerPrinting surfaceAbout 12 mm About 12 mmLines152 mmCleaning as indicated below will help maintain stable printer operation and extend the printer’s life.Wearing gloves at cleaning is recommended to prevent injury.Make sure to turn off the power before cleaning.CLEANING
22PREPARATION TROUBLE-SHOOTINGFEATURESPRECAUTIONS OTHERS CONTENTSCLEANINGPLATEN ROLLER CLEANINGPreparationsAlcohol (ethyl alcohol, etc.)Soft and clean clothClean the black part of the roller.Wipe the black part carefully with cloth dampened with a small amount of alcohol.Wipe the whole roller by turning it.PAPER FLANGE CLEANINGClean the parts that contact the print paper sides as shown right.Wipe the parts carefully with cloth dampened with a small amount of alcohol.Platen rollerCleaning part
23PREPARATION TROUBLE-SHOOTINGFEATURESPRECAUTIONS OTHERS CONTENTSSPECIFICATIONSClass Digital Color PrinterModel CP-D90DWPrinting method Sublimation Dye Thermal Transfer line print3-color faces progressive printing (yellow, magenta, and cyan) and surface laminationPrint’s resolution 300 x 300 dpi (dpi : dots per inch)Print size 9x13 (3.5x5”) 10x15 (4x6”) 13x18 (5x7”) 15x20 (6x8”) 15x23 (6x9”)89 x 127mm (without frame)102 x 152mm (without frame)127 x 178mm (without frame)152 x 203mm (without frame)152 x 229mm (without frame)Gradations 256 (8 bits) for each colorSupply method AutomaticInterface Hi-Speed USB (Ver.2.0)DC output terminals 12 V / 2.0 A max. (high priority)5 V / 2.0 A max. (low priority)Power supply 100 - 240 V AC 50/60 HzPower consumption 5.5 AOperating conditions Temperature : 5°C - 40°C Humidity : 30% - 80% RH (no dewing)Installation conditions Operating attitude : Horizontal ±5°Outside dimensions 276 (W) x 367 (D) x 238 (H) mmWeight Approx. 14 kg (excluding accessories)Standard accessories Power cords (for 120 V and 230 V), Ink cassette (1), CD-ROM (1), Paper ange (1 set), Spacers (2), Quick setup guide (1), Paper strip bin (1), Paper tray (1), Cable tie (2), Securing band (1), Screw for securing band (2), Washer (1)Print size and outside dimensions show typical value.Design and specications are subject to change without notice. Contents of CD-ROM • Operation manual
MITSUBISHI ELECTRIC EUROPE B.V.UK BranchTravellers Lane, Hateld, Herts. AL10 8XB, England, U.K.Phone +44 (0) 1707 276100 FAX +44 (0) 1707 278755German BranchGothaer Strasse 8, 40880 Ratingen ; Postfach 1548, 40835 Ratingen ; GermanyPhone +49 (2102) 486-9250 FAX +49 (2102) 486-7320French Branch25, Boulevard des Bouvets - 92741 NANTERRE cedex, FrancePhone +33 (1) 55 68 55 00 FAX +33 (1) 55 68 57 31Benelux BranchNijverheidsweg 23a, 3641 RP Mijdrecht, The NetherlandsPhone +31 (0) 297-282461 FAX +31 (0) 297-283936Spanish Branch (Barcelona)Ctra. de Rubí, 76-80 - Apdo. 42008190-Sant Cugat del Vallés - (Barcelona) SpainPhone +34 93 565 3154 FAX +34 93 589 4388Manufactured by Mitsubishi Electric (Malaysia) Sdn. Bhd.PLO 32, Kawasan Perindustrian Senai II, 81400 Senai, Johor Darul Takzim, MalaysiaPlease contact the nearest Mitsubishi sales branch to get DOC (Declaration of Conformity) of the EC Directive 1999/5/EC.WE919C194A2MITSUBISHI ELECTRIC US. INC.Visual and Imaging Systems5900-A Katella Ave.Cypress, CA 90630-5019, U.S.A.Phone 888-307-0309

Navigation menu