Mitel Deutschland 68983AA610D-01 1,9 GHz DECT Phone, portable part User Manual BA 610d 620d 630d GAP GB 1FA56B

Mitel Deutschland GmbH 1,9 GHz DECT Phone, portable part BA 610d 620d 630d GAP GB 1FA56B

UserManual.wiki >

Mitel Deutschland >

68983AA610D 01 User Manual

UserMan

www.aastra.comCreated on: 16.10.2008 • Issue 1 • Products similar to illustrations • Right to make technical changes reserved.Aastra 610d, 620d, 630d Aastra 610d, 620d, 630d withGAP-compatible communication systemsUser's Guide

iiiiiContentsContentsProtection functions …………………………………………………………………39Profiles ………………………………………………………………………………40"Info" menu …………………………………………………………………………40"Active features" menu …………………………………………………………………41"Phone book" menu ……………………………………………………………………41"Time/Alarms" menu …………………………………………………………………42"Audio" menu …………………………………………………………………………44"Call filter" menu ………………………………………………………………………46"System" menu …………………………………………………………………………47"Settings" menu…………………………………………………………………………48"Security" menu …………………………………………………………………………51"Profiles" menu ………………………………………………………………………53Key programming ...................................................................................................................55Programming (general) …………………………………………………………………55Special features for the VIP list (on the hotkey on delivery)…………………………………56Appendix.................................................................................................................................57Care and Maintenance …………………………………………………………………57Environmental Characteristics and Disposal ………………………………………………57Instructions for disposal ………………………………………………………………57Declaration of Conformity ………………………………………………………………58Limited Waranty ………………………………………………………………………59Exclusions ……………………………………………………………………………59Warranty Repair Services ………………………………………………………………59After Warranty Service…………………………………………………………………60Accessories ……………………………………………………………………………61Technical specifications …………………………………………………………………63Menu Structure …………………………………………………………………………65Index……………………………………………………………………………………68Basic functions ........................................................................................................................24Switching the handset on/off ……………………………………………………………24Key lock / Phone lock ……………………………………………………………………24Switching hands-free operation on/off ……………………………………………………24Acknowledging an appointment/alarm …………………………………………………25Adjusting the volume of the earpiece during the call ……………………………………25Switching the ringer on/off ………………………………………………………………25Switching ringer off at call ………………………………………………………………25Illumination ……………………………………………………………………………26Changing the brightness/contrast of the display …………………………………………26Muting the handset ……………………………………………………………………26Automatic hide / Info window ……………………………………………………………27Event window and "Info"- Menu …………………………………………………………27Vibration alarm (620d, 630d only) ………………………………………………………27Configuring your personal directory ………………………………………………………27Editing lists ……………………………………………………………………………28Using the Bluetooth® headset (Aastra 620d, 630d) ………………………………………29Registration …………………………………………………………………………29Telephoning via the Bluetooth headset…………………………………………………30Special key (Hotkey) /VIP list (Aastra 620d, 630d) …………………………………………30VIP list (Aastra 610d) ……………………………………………………………………30Special functions (Aastra 630d only)………………………………………………………31SOS …………………………………………………………………………………31"Mandown" …………………………………………………………………………31Telephoning............................................................................................................................33Answering a call…………………………………………………………………………33Making internal / external calls …………………………………………………………34Direct dial ……………………………………………………………………………34Predial ………………………………………………………………………………34Calling from the Redial list ………………………………………………………………34Calling from your personal Phone book …………………………………………………35Calling from the Caller lists ………………………………………………………………35Ending calls ……………………………………………………………………………36Multiple connections ……………………………………………………………………37Consultation call / Brokering …………………………………………………………37Devices menu..........................................................................................................................38Notes on the display symbols in the menu………………………………………………38Overview ………………………………………………………………………………38Info …………………………………………………………………………………38Active features ………………………………………………………………………38Phone book …………………………………………………………………………39Time/Alarms ………………………………………………………………………39Audio ………………………………………………………………………………39Call filter ……………………………………………………………………………39System ………………………………………………………………………………39Settings ………………………………………………………………………………39

1ivGeneral informationGeneral informationAastra 610d- 3 softkeys (programmable) / 2 sidekeys - Caller list for 30 entries- Redial list for 20 entries- Local phone book for 100 entries- Connection socket for headset- Safety class IP 50Aastra 620d- 1 hotkey / 3 sidekeys / 3 softkeys (programmable)- Caller list for 50 entries- Redial list for 30 entries- Local phone book for 200 entries- Headset connection via cable or Bluetooth- Micro SD card for device-specific settings (optional) - Mini USB connection- Safety class IP 50Aastra 630d- 1 hotkey / 3 sidekeys / 3 softkeys (programmable)- 1 emergency call key- Caller list for 50 entries- Redial list for 30 entries- Local phone book for 200 entries- Sensor for "Mandown"- Headset connection via cable or Bluetooth- Micro SD card for device-specific settings (optional) - Mini USB connection- Safety class IP 65 (dust and water spray protected)M@for al ers Contents

32General informationNote for wearers of hearing aidsBefore using the handset, users of hearing aids should note that radio signals can affect hearing aidsand, if powerful enough, can cause an unpleasant buzzing sound.Communications Regulation InformationFCC Notices (U.S. Only)This device complies with part 15 of the FCC Rules. Operation is subject to the following two condi-tions:(1) This device may not cause harmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation.Modifications not expressly approved by this company could void the user's authority to operate theequipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec-tion against harmful interference in a residential installation. This equipment generates, uses andcan radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that inter-ference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected.• Consult the dealer or an experienced radio/TV technician for help.Health and Safety InformationExposure to Radio Frequency (RF) Signals:The wireless phone is a radio transmitter and receiver. It is designed and manufactured not toexceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communi-cations Commission (FCC) of the U.S. Government. These limits are part of comprehensive guidelinesand establish permitted levels of RF energy for the general population. The guidelines are based onthe safety standards previously set by both U.S. and international standards bodies. These standardsinclude a substantial safety margin designed to assure the safety of all persons, regardless of ageand health.This device and its antenna must not be co-located or operating in conjunction with any otherantenna or transmitter.General informationPrescribed use / Declaration of ConformityThis product can be used in all EU member states on a DECT-GAP-compatible communication sys-tem. The telephone complies with the radio-specific European harmonised standards for DECT. TheCE mark on the product confirms its conformance with the technical directives for user safety andelectromagnetic compatibility, the relevant declaration of conformity according to European Direc-tive 99/5/EC applies at the date of issue.The declaration of conformity can be viewed on the Aastra homepage on the Internet.This device is also approved for use in North America (USA and Canada). For more information onthis, read the safety information on page 3.Please also use the other documentation that was supplied with the parts of your telephone system.Notes on safetyIt is imperative to observe the following instructions when setting up, connecting and using thetelephone.•Place the charger cradle on a non-slip surface. •Lay the connection cable so it cannot cause accidents! •Important instructions for using the battery are given on page 9. •Do not place the handset or the charger cradle•close to heat sources•in direct sunlight•next to other electrical devices •Protect your telephone from moisture, dust, aggressive liquids and gases. •Only use approved accessories. •Only use the plug-in power supply supplied (23-00-1061-00). •Always switch off the handset before removing the battery •Never•open the charger cradle or the handset (except for the battery compartment cover) yourself!•touch the plug contacts with pointed metallic objects!•carry the charger cradle by the connection cable! •Only clean your telephone with a slightly moist cloth. •Do not use your telephone in explosive areas. •Do not use the Aastra 610d and 620d in wet rooms (e.g. bathrooms).

54InstallationInstallationInserting the standard batteryAastra 610d, 620dPush the battery cover downwards until it disengagesfrom the locking mechanism and lift off. Insert the bat-tery with the contacts downwards. Replace the batterycover and push upwards until it snaps into place.Aastra 630dUndo the two screws on the back of the handset with asuitable tool and remove the cover. Insert the batterywith the contacts downwards, close the battery com-partment with the cover and screw back in place. Donot damage the rubber seal when assembling.Inserting the power batteryYou can order a battery with higher capacity (power battery) for the Aastra 620d and 630das an accessory (see page 61). This battery has a thicker design so you need anotherbattery cover that protrudes approx. 6 mm beyond therear of the device.Install the new battery cover as described above. In the Aastra 620d you should remove any installedfixing bracket beforehand.This EUT has been shown to be capable of compliance for localized specific absorption rate (SAR) foruncontrolled environment/general population exposure limits specified in ANSI/IEEE Std. C95.1-1992 and had been tested in accordance with the measurement procedures specified in FCC/OETBulletin 65 Supplement C (2001) and IEEE 1528-2003.Industry Canada (Canada only)Operation of this device is subject to the following two conditions: (1) this device may not causeinterference, and (2) this device must accept any interference, including interference that may causeundesired operation of the device.Privacy of communications may not be ensured when using this telephone.Exposure to Radio Frequency (RF) Signals:The wireless phone is a radio transmitter and receiver. It is designed and manufactured not toexceed the emission limit for exposure to radio frequency (RF) energy set by the Ministry of Health(Canada), Safety Code 6. These limits are part of comprehensive guidelines and established permit-ted levels of RF energy for the general population. These guidelines are based on the safety stan-dards previously set by international standard bodies. These standards include a substantial safetymargin designed to assure the safety of all persons, regardless of age and health.This device and its antenna must not be co-located or operating in conjunction with any otherantenna or transmitter.This device has been shown to be capable of compliance for localized specific absorption rate (SAR)for uncontrolled environment / general public exposure limits specific in ANSI/IEEE C95.1-1992 andhad been tested in accordance with the measurement procedures specified in IEEE 1528-2003.General information

7InstallationHeadset connection/Bluetooth®All handsets have a 2.5 mm jack plug at the bottom left for connecting a headset. Only use therecommended headsets (see Accessories page 61).The Aastra 620d/630d mobile handsets have a Bluetoothinterface (2.0) for corresponding headsets.With a headset only audio data can be transferred via the Bluetoothinterface.Aastra 630d - Headset: To remove the sealing coverThe opening of the headset connection is closed with a captive cover. If the headset is not in use,please close the opening so the device can be used in accordance with its protection class.Remove the sealing cover from the device by pulling it out on the upper edge. Never pull it out onthe bottom edge.6InstallationInstalling/removing a mounting bracket or rotary clipAastra 610d, 620dPlace the supplied fixing bracket on both openings atthe upper end of the handset and snap in place bypressing downwards. To remove the fixing bracket,press into the small cutouts at the edge of the bracketand pull the two sides slightly apart.The Aastra 610d and 620d can also be fitted with a rotary clip as an accessory. Place the supplied fixingbracket on both openings at the upper end of thehandset and snap in place by pressing downwards. Theclip is then pushed onto the protruding button. Torelease the handset from the clip, press the top button.Attaching the carrying strapAastra 610d, 620d: There are two openingsin the upper part of the fixing bracket. Feed the lowerend of the carrying strap through these openings (ple-ase install with the fixing bracket removed). Carryingstraps are available as accessories (see page 61).Aastra 630: A carrying strap with carrying strap attachment is available as an accessory. Toattach the holder, replace the screwed-on beltclip by the carrying strap attachment.

9InstallationPower supply / Power supply unitThe power supply unit is designed for 100V to 240V AC (50-60 Hz). It is supplied with four changeadapters enabling virtually worldwide use. Where necessary, connect the plug normally used in yourcountry to the power supply unit. There are two versions of the plug-in power supply unit that areconnected slightly differently:Version 1: Set the switch on the power supply unit to OPEN and push out the existing plug upwards.Then insert the new plug required into the power supply unit and lock it with the switch (LOCK).Version 2: Remove any existing plug by pressing OPEN. Then insert the required new plug into thepower supply unit at a slight angle with the label TOP upwards. Press downwards until it snaps intoplace.Micro SD cardAastra 620d, 630d: There is a slot for a micro SD card under the battery in the handset. This is notused in the current delivery condition and is available for future applications. Please make sure thatthe card slot is not damaged when inserting the battery.Important information about the batteryThe devices are powered by a Li-ion battery (both standard and power battery). It is vital that you read the safety regulations before using the battery for the first time. Keep thesesafety regulations and all instructions for use at hand for future reference.•Dispose of used batteries according to the instructions on page ???.Failure to heed any of the following precautions when using the battery can lead to overheating, fireand danger of explosion.•CAUTION: Risk of explosion if the battery is replaced by an incorrect type.•Never try to use the battery for the power supply of any device other than these handsets.•Never use or leave the battery close to a naked flame.•Never put the battery into a microwave oven, do not throw it into a fire and do not expose it tohigh temperatures by any other means.• Never carry or store the battery together with electrically conducting objects (neck chains, pencilleads, etc.)•Never attempt to open the battery, never modify it in any way or subject it to severe blows.•Never immerse the battery in fresh or salt water.•Never use or leave the battery in direct sunlight, in a vehicle parked in blazing sunlight or in anyother location with high temperatures.8InstallationUSB and external charging connectionAastra 620d, 630d: A mini USB connection (2.0) is located at the bottom right. This has two func-tions:•as an interface for connecting to a PC to load data from or to the device, for example. If the hand-set is connected to a PC, the battery is charged at the same time. The charging process is, howe-ver, slower than if the handset is charged in the charging unit.•as a connection socket for a USB charging device (see Accessories, page 61) to charge the handseteven when it is in a leather pouch. The charging process is also slower here than charging in thecharger cradle.Only use a shielded USB cable (see Accessories, page 61)Aastra 630d - USB connector: To remove the sealing coverThe opening of the USB connection in the Aastra 630d is closed with a captive cover. If the USB cableis not in use, please close the opening so the device can be used in accordance with its protectionclass.Remove the sealing cover from the device by pulling it out on the upper edge. Never pull it out onthe bottom edge.Connecting the charging unitAastra 610d, 620d: This handset can be used without any changes to the charger cradle.Aastra 630d: To use this handset, you must removethe two lateral guides in the charger cradle. They areeasy to lift on the inside edge using a fingernail or apaper clip.The plastic guides can also be removed, by pushing a suitablescrewdriver into the slits on the bottom of the charger.Connect the plug-in power supply to the charger cradle and place the connection cable through thecable guide. Place the charger cradle on a non-slip surface. Change the plug of the power supplyunit if necessary (see below).

11CommissioningCommissioningCharge the battery before using your handset for the first time. Maximum battery performance is first reached after three to five charging and discharging cycles.Place the handset in the charger cradle regularly to achieve optimum battery charge.After initial charging of the battery your handset is ready for use, calls can be received or made fromthis handset.Charging and durationsCharging time in the charger cradle (empty battery): Full capacity: 2 hours (standard battery), 4 hours (power battery).Charging time with USB charging device:Full capacity: 4 hours (standard battery), 8 hours (power battery).Talk time: Standard battery - up to 15 hours (when fully charged) for North America. Standard battery - up to 12 hours (when fully charged) for other countries.Power battery - up to 30 hours (when fully charged) for North America. Power battery - up to 24 hours (when fully charged) for other countries.Standby time: Standard battery - up to 105 hours (when fully charged) for North America. Standard battery - up to 110 hours (when fully charged) for other countries.Power battery - up to 190 hours (when fully charged) for North America. Power battery - up to 200 hours (when fully charged) for other countries.NotePoor radio signals (far away from the system base station) reduce the handset standby and talktimes. High loudspeaker or ringer volume, frequent key activation and display illumination as well asactive vibration alarm and Bluetoothoperation are features that can specifically shorten standbyand talk times.10Installation• If you ever notice liquid leaking out, unusual odour, build-up of heat, discolouration, deformationor any other abnormal condition when you use, charge or store the battery, remove the batteryimmediately from the handset and keep it away from naked flames.• The battery fluid can damage your sight. If at any time battery fluid accidentally gets into youreyes, rinse your eyes immediately with clean tap water and contact a doctor.• If the battery is to be used by children, make sure a responsible adult instructs the children in theprecautions and proper handling, and make sure the children handle the battery correctly.• If battery fluid accidentally gets onto your clothing or skin, rinse the affected place immediatelywith pure tap water. Prolonged contact with battery fluid can lead to skin inflammation.Precautions during use• The battery is designed for use with these handsets only.• Only use the charger cradle supplied for charging.• A new battery is not charged so you need to charge it before using for the first time.• Using the battery in a cold environment can shorten the expected operating life of a full charge.Charge the battery at a location with a temperature between 10° C and 35° C. Charging outsidethis temperature range can lead to a longer-than-usual charging time or even to failure of thecharging process.• An extremely short operating time after a full charge indicates that the lifetime of the battery hasexpired. Replace the battery.• Never wipe the battery with thinners, benzene, alcohol, or other volatile substances, or chemicallytreated cloths. These can cause deformation of the battery and malfunction.

13CommissioningRegistrationA registration is stored in the device for each communications system on which the handset hasbeen logged in. A registration entry also includes a system name (e.g. A, B, C,..).If you have logged into the system with your handset, this name appears on the display.SubscriptionAfter the handset is subscribed in one or more communications systems you can use the telephoneto make and receive calls. If the Auto search feature (see page 47) is activated, the handset (in idlemode) automatically selects the nearest accessible system and logs in there. If you don't want to usethe automatic search, you can search exclusively for any desired system using the stored registra-tion entries.12CommissioningBattery: Charging statesThe charge status of the battery is indicated on the display. The displays mean:Batteries are 81 - 100 % chargedBatteries are 61 - 80 % chargedBatteries are 41 - 60 % chargedBatteries are 21 - 40 % chargedBatteries are 0 - 20 % charged•If the handset is placed in the charger cradle when the battery is completely discharged, there isno indication until a specific charge status is reached. This process can take a few minutes and isnot a malfunction.•Even when the handset is switched off, the battery slowly discharges.•When charging, the LED lights orange; when the battery is fully charged, the LED lights green (canbe deactivated in Menu  Settings -> Illumination -> LED indications -> Life indication).Battery warningWhen the battery capacity is almost exhausted, a warning sign appears on the display and a series ofwarning beeps sounds (can be deactivated in the Menu  Audio -> Attention tones). If you aremaking a call, you have approximately five minutes' talk time left before the handset switches itselfoff.Registering your handset (log-in)Your handset can be operated on up to 10 different communications systems.To do so, it must be registered or, more precisely, logged in on each station.Your system administrator will usually register the handset for operation on the telephone system.The log-in must be enabled for this. Depending on the manufacturer of the system, the enabling canvary. In most cases the IPEI of the handset is needed (found in Menu  System -> Show IPEI). Toregister the handset itself on the communication system, proceed as described in the "System"menu. This requires a PARK number sequence and an access code (AC = Authentication Code) fromthe system administrator.

15Function overviewDisplay arrangementSymbols on the upper display line:Signal strengthMicrophone switched offBattery charge statusLoudspeaker switched onHeadset activeBluetoothheadset activeVoice box message (if available)Ringer switched offCall key pressedCall filter activeDisplay Information on the current connection status or lists and textof the menu are shown on the display. In the idle status you will see •System name with internal call number •Your programmed user name •Current time and date•Any programmed alarm clock and/or appointment •Any activated features•Symbols for programmed functions The time is only displayed if it has been transferred from the system or set by you.The navigation keys are used to scroll upwards or downwards through selection lists (e.g. phonebook) and the features menu. A selectable entry is highlighted.14Function overviewFunction overviewDisplays, softkeys, LEDs and key functions Key assignment (on delivery)Emergency call key (Aastra 630d only)EarpieceAastra 610d:+/- keys (volume adjustment)Aastra 620d/630d:3 sidekeys (programmable) andvolume adjustmentNavigation keys Open listening/Hands-freemodeCall key/consultation call keyHeadset connectionRinger on/offLEDsHotkey (programmable)(not Aastra 610d)DisplaysRear: Loudspeaker3 softkeys (programmable)Delete key Cancel key / Power on/off keyNumber/letter keysMini USB connection(not Aastra 610d)Key lockMicrophone

17Function overviewLEDThe LED (3-colour/red-orange-green) at the upper corner signals specific events that currently can-not be changed as they are required by the system or can be switched on or off by you. Please referto the following table for more details.Colour Status Description can be switched on/offGreen Flashes quickly Incoming call YesFlashes slowly Ready indicator / Within range / Not in Yesthe charger cradleLights Hands-free operation switched on YesLights Battery fully charged (if in the charger cradle) Yes 1)Red Flashes quickly Mandown (Aastra 630d only) NoFlashes quickly Outside the system range NoFlashes quickly Alarm call / Message NoFlashes slowly New entries in the info panel (e.g. call list) YesFlashes slowly Alarm clock / Appointment YesOrange Flashes slowly Ready indicator / Within range / Not in Yes 1)the charger cradle / Battery capacity below 60%Lights Battery is charging Yes 1)1) coupled to the on/off switch of the ready indicator16Function overviewSoftkey line and idle displayThe three keys below the display are called softkeys. The functions assigned to these keys are shownin the bottom display line. The key function changes automatically according to the operating stateof the handset.When the handset is delivered the following symbols are shown in the softkey line:Enables selection from the redial list. Navigation menu. This is used to call up a selection list with frequently used features.These include:• Handset phone book (personal phone book)• Information lists (call list, voice box*, redial)• Profiles* if availableThese functions are also assigned to the navigation keys.You can use them to reach the phone menu (see page 38).NotePlease note that the functions of the softkeys are programmable and can have a different assign-ment later.

21Navigating in menusNavigating in menusExample: Setting the language1. Open the menu - depending on the configuration of your handset, press - the softkey or- briefly press the end key and select the menu item from the list.2. Use the navigation keys ➐/❷to select the Settings entry from the list and press the Oksoftkey.3. Use the navigation keys ➐/❷to select the Display entry from the list and press the Oksoftkey.4. Use the navigation keys ➐/❷to select the Language entry from the list and press the Oksoftkey.5. Use the navigation keys ➐/❷to select one of the languages offered from the list andpress the softkey (Save). 6. Exit the menu by pressing the Escsoftkey several times.Example: Personal phone book/Editor1. Open the menu - depending on the configuration of your handset, press - the navigation key ❷- the softkey  and select the Phone book entry/Okand Personal directory/Ok.- one of the function keys to which you have assigned access to the phone book.2. If the phone book is empty, press the Newsoftkey.If entries already exist, press the  softkey, select New entry and confirm with Ok.3. You will see an overview of the possible entries. Select Name and press the Oksoftkey.4. Press the key repeatedly to select the character of a key, the character assigned to this keythen appears. The entry position automatically moves forward if you make no immediateentry or enter a new character. You can correct entries by moving the cursor to the num-20Function overviewKey Duration . . . in status DescriptionHotkey (not 610d)short Standby Select the programmed function (VIP list)long Standby Programming with the desired functionSOS key long All states Make an emergency call (call or message,(630d only) depending on the programming and thetelephone system)Top sidekey short Standby Select the programmed function(620d, 630d only) Connection Increase volume (for current connection only)long Standby Programming with the desired functionSidekey short Connection Increase volume (for current (610d only) connection/save with Ok)Middle sidekey short Standby Select the programmed function(620d, 630d only) long Standby Programming with the desired functionBottom sidekey short Standby Select the programmed function(620d, 630d only) Connection Reduce volume (for current connection only)long Standby Programming with the desired functionSidekey short Connection Reduce volume (for current (610d only) connection/save with Ok)

$23Navigating in menusEditorEntering names/call numbersThe Editor helps you to enter or change call numbers and names in the lists (e.g. phone book).The maximum length for entering call numbers (numbers) is 32 characters and for entering names(letters) is 16 characters. For entering letters the following character set can be used: Key Upper case Lower case1? ! 1 - + * / = & ( ) % ¿ ¡ ? ! 1 - + * / = & ( ) % ¿ ¡2A B C 2 Ä Å À Á Ã Æ Ç a b c 2 ä å à á ã æ ç3D E F 3 È É Ê Ë d e f 3 è é ê ë4G H I 4 Í Ì Î Ï ∏g h i 4 í ì î ï π5JKL5 j k l 56M N O 6 Ñ Ö Ò Ó Ô Õ Ø m n o 6 ñ ö ò ó ô õ ø7P Q R S 7 ß Ωp q r s 7 ß µ8T U V 8 Ü Ù Ú Û t u v 8 ü ù ú û9WXYZ 9 w x y z 90space , . 0 : ; _ ” ‘ ˆ ˜ space , . 0 : ; _ ” ‘ ˆ ˜ ✳Switching upper/lower case Switching lower/upper case## @ €$ £ ¥ § < > { | } [ \ ] # @ €$ £ ¥ § < > { | } [ \ ]22Navigating in menusber/letter to be deleted with the ➛/❿keys and then pressing the Ckey. You can now addnew characters at this point. Every word is automatically started with an upper case letter. Press the * key several timesto switch between upper and lower case (Aor ais shown) or only upper case at the start ofthe word (Aa is shown).5. Now select the next line from ❷(e.g. Private) and press Ok.6. Enter the private call number for the entry and press Ok.7. Select the next line from ❷(e.g. Business) and press Ok.8. Enter the business call number for the entry and press Ok.9. Using this method enter the mobile call number and the e-mail address if required.10. If you want to assign a Quick Call number key to the entry, select Quick call and press Ok.Select a key 2...9 from the list and press Ok. Exit the list with Esc. In the list you can delete oroverwrite existing entries.11. You can assign a special melody to the entry that will signal a call from this call number.Select Melody and press Ok. Select a melody from the list. Press Okto save your selection.12. Press the softkey to save the complete phone book entry.$