Microsoft WE07M Bluetooth Headset User Manual HS 99W en1 with FCC IC notice

Microsoft Mobile Oy Bluetooth Headset HS 99W en1 with FCC IC notice

Contents

Manual 3

Nokia Bluetooth Headset BH-2119204665/11110987453612HS-99W_en1_with_FCC&IC_notice.fm Page 1 Tuesday, July 31, 2007 3:02 PM
ENGLISHDECLARATION OF CONFORMITYHereby, NOKIA CORPORATION declares that this HS-99W product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/.© 2007 Nokia. All rights reserved.Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.Bluetooth is a registered trademark of Bluetooth SIG, Inc.Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice.The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.Unauthorized changes or modifications to this device may void the user's authority to operate the equipment.Export ControlsThis device may contain commodities, technology or software subject to export laws and regulations from the US and other HS-99W_en1_with_FCC&IC_notice.fm Page 2 Tuesday, July 31, 2007 3:02 PM
ENGLISHcountries. Diversion contrary to law is prohibited.IntroductionThe Nokia Bluetooth Headset BH-211 allows you to make and receive calls while on the move. You can use the headset with compatible mobile devices that support Bluetooth wireless technology.Read this user guide carefully before using the headset. Also read the user guide for your mobile device, which provides important safety and maintenance information. Keep the headset out of reach of small children.Bluetooth wireless technologyBluetooth wireless technology allows you to connect compatible devices without cables. The phone and the headset do not need to be in line of sight, but they should be within 10 meters (33 feet) of each other. Connections may be subject to interference from obstructions, such as walls, or other electronic devices.The headset complies with the Bluetooth Specification 2.0 + EDR that supports the Headset Profile 1.1 and Hands-Free Profile 1.5. Check with the manufacturers of other devices to determine their compatibility with this device.There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider.HS-99W_en1_with_FCC&IC_notice.fm Page 3 Tuesday, July 31, 2007 3:02 PM
ENGLISHGet startedThe headset contains the following parts shown on the title page: green indicator light (1), multifunction key (2), charger connector (3), earloop (4), earpiece (5), and microphone (6).Before using the headset, you must charge the battery and pair the headset with a compatible mobile device.Parts of the headset are magnetic. Metallic materials may be attracted to the headset. Do not place credit cards or other magnetic storage media near the headset, because information stored on them may be erased.ChargersCheck the model number of any charger before using it with this headset. The headset is intended for use with the AC-3, AC-4, and DC-4 chargers.Warning: Use only chargers approved by Nokia for use with this particular enhancement. The use of any other types may invalidate any approval or warranty and may be dangerous.When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.Charge the batteryThe headset has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device, as you may damage the device.1. Connect the charger to a wall outlet. 2. Connect the charger cable to the charger connector. The indicator light is on while charging. It may take a while before charging starts. HS-99W_en1_with_FCC&IC_notice.fm Page 4 Tuesday, July 31, 2007 3:02 PM
ENGLISHIf charging does not start, disconnect the charger, plug it in again, and retry. Charging the battery fully may take up to 2hours.3. When the battery is fully charged, the indicator light turns off. Disconnect the charger from the headset and the wall outlet.The fully charged battery has power for up to 6 hours of talk-time or up to 150 hours of standby time. However, the times may vary with different compatible Bluetooth devices, usage settings, usage styles, and environments.When battery power is low, the indicator light quickly flashes twice about every 3 seconds.Switch the headset on or offTo switch on, press and hold the multifunction key until the headset beeps four times and the indicator light is displayed.To switch off, press and hold the multifunction key until the headset beeps four times and the indicator light is displayed briefly.Pair the headset1. Ensure that your phone is switched on and the headset is switched off.2. Press and hold the multifunction key until the indicator starts to flash quickly and the headset beeps twice.3. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices.4. Select the headset from the list of found devices.5. Enter the passcode 0000 to pair and connect the headset to your phone. In some phones you may need to make the connection HS-99W_en1_with_FCC&IC_notice.fm Page 5 Tuesday, July 31, 2007 3:02 PM
ENGLISHseparately after pairing. You only need to pair the headset with your phone once.If the pairing is successful, the headset appears in the phone menu where you can view the currently paired Bluetooth devices. When the indicator light flashes twice every 5 seconds, the headset is connected to the mobile device and ready for use.Basic usePlace the headset on the earTo use the headset with the supplied earloop, insert the earloop into the small opening at the back of the headset (9). Slide the earloop over your ear (10), and gently plug the earpiece into your ear. Push or pull the earloop to set its length. Set the headset so that it points toward your mouth (11). To use the headset on the left ear, rotate the earloop so that the loop is to the left of the Nokia logo (Figures 7 and 8). Call handlingTo make a call, use your phone in the normal way when the headset is connected to your phone.If your phone supports last number redialing with the headset, press the multifunction key twice when no call is in progress.If your phone supports voice dialing with the headset, press the multifunction key when no call in progress, and proceed as described in the user guide of your mobile device.HS-99W_en1_with_FCC&IC_notice.fm Page 6 Tuesday, July 31, 2007 3:02 PM
ENGLISHTo answer or end a call, press the multifunction key. To reject the call, press and hold the multifunction key for about 3 seconds.To adjust the volume, use the volume keys on your mobile device. To switch the call between the headset and a compatible device, press and hold the multifunction key for about 2 seconds.ResetTo reset the headset if it stops functioning, although it is charged, plug the headset into a charger.Battery informationYour device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with Nokia approved chargers designated for this device.Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time.Never use any charger that is damaged.Leaving the device in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing.HS-99W_en1_with_FCC&IC_notice.fm Page 7 Tuesday, July 31, 2007 3:02 PM
ENGLISHDo not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged.Care and maintenanceYour device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage.• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely.• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.• Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.• Do not attempt to open the device.• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.• Do not paint the device. Paint can clog the moving parts and prevent proper operation.HS-99W_en1_with_FCC&IC_notice.fm Page 8 Tuesday, July 31, 2007 3:02 PM
ENGLISHAll of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service.DisposalThe crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. Do not dispose of these products as unsorted municipal waste.Return the products to collection to prevent possible harm to the environment or human health from uncontrolled waste disposal and to promote the sustainable reuse of material resources. Collection information is available from the product retailer, local waste authorities, national producer responsibility organizations, or your local Nokia representative. For more information, see product Eco-Declaration or country-specific information at www.nokia.com.FCC/IndustryCanada noticeThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference; and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular HS-99W_en1_with_FCC&IC_notice.fm Page 9 Tuesday, July 31, 2007 3:02 PM
ENGLISHinstallation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE: Changes or modifications not expressly approved by Nokia could void the user's authority to operate the equipment.HS-99W_en1_with_FCC&IC_notice.fm Page 10 Tuesday, July 31, 2007 3:02 PM

Navigation menu