Microsoft RM-69 GSM 900/1800/1900 Cellular Telephone w/BT User Manual RM 69 FCC v1
Microsoft Mobile Oy GSM 900/1800/1900 Cellular Telephone w/BT RM 69 FCC v1
UserManual.wiki
>
Microsoft
>
RM-69 User Manual
>
Manual
Contents
1.
Maual
2.
Manual
Manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![Quick guide✁Press and hold a key [2–8]. You must assign a key to a number in the phone book.Look up a nameSelect Names > Search.Check voice mailPress and hold the 1 key [contact your service provider for details].Write text messagesSelect Menu > Messages > Text messages > Create message or move the Five-way joystick to the left. Write the message.Send text messagesIn the message entry screen, select Send. Enter the recipient’s phone number or search for it in contacts, and select OK. The message service is dependent on the service provider.Read new messageIf Messages received appears on the display, select Show; then select the message you want to read.Reply to a messageSelect Reply. Write a reply. Select Send.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-4.png)
![For your safety8Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Contact your service provider for more information.This wireless device is a 3GPP GSM Release 99 terminal supporting GPRS service, and is designed to support Release 4 GPRS networks. However, there may be some compatibility issues when used in some Release 97 GPRS networks. For more information contact your service provider. This device supports WAP 2.0 protocols [HTTP and SSL] that run TCP/IP protocols. Some features of this device require network support for these technologies.■Shared memoryThe device has three different memories. Names, text messages, SMS e-mail, voice tags, calendar, and notes may share the first memory. The second shared memory is used by multimedia messages, files stored in Gallery, and configuration settings. The third shared memory is used by the e-mail application and Java games and applications. Using one or more of these features may reduce the memory available for the remaining features sharing the same memory. For example, saving many Gallery items may use all of the available memory in the second memory. Your device may display a message that the memory is full when you try to use a shared memory feature. In this case, delete some of the information or entries stored in the corresponding shared memory before continuing.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-8.png)
![Welcome9WelcomeCongratulations on your purchase of the Nokia 6822 mobile device. Your device provides many functions that are practical for daily use, such as a calendar, a clock, an alarm clock, and a built-in camera. The camera can be used for recording video clips and taking pictures that you can attach as wallpaper in the standby mode or as thumbnail pictures in Names. For more information, see ”Camera” on page 69. Other features on your device are:• Multimedia messaging, see ”Multimedia messages [MMS] [network service]” on page 37.• Instant messages, see ”Instant messages (Chat)” on page 46.• Presence-enhanced contacts, see ”My presence” on page 54.• E-mail application, see ”E-mail [network service]” on page 40.• EDGE [enhanced data rates for GSM evolution], see ”GPRS” on page 95.• J2ME™ Java 2 Micro Edition, see ”Applications” on page 77.• XHTML browser, see ”Web” on page 82.• Bluetooth connectivity, see ”Set up a Bluetooth connection” on page 91.■Copyright protectionCopyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded.■Contact NokiaIf you ever need to call Nokia Customer Care or your service provider, you must provide specific information about your device [see ”Phone information” on page 10]. Whether you call about your device or an enhancement, have the equipment with you when you call. If a Nokia representative asks a](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-9.png)
![Welcome10specific question about the enhancement, you will have it available for quick reference. Nokia support on the webCheck www.nokia.com/support or your local Nokia web site for the latest version of this user guide, additional information, downloads, and services related to your Nokia product.Phone informationInformation about your device is provided on the phone label on the back of the device under the battery [see ”Remove the back cover” on page 12]. The label contains the model and serial numbers, as well as the following: • Phone type [RM-69]• Phone model [such as Nokia 6822]• International Mobile Equipment Identity [IMEI]](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-10.png)
![Phone at a glance111. Phone at a glancePower key [1]Right selection key [2]End key [3]Keypad [4]Microphone [5]Pop-Port connector [6]Charger port [7]Call key [8]Left selection key [9]Five-way joystick [10]Display screen [11]Loudspeaker [12]Left selection key [keyboard open] [13]Earpiece [14]Infrared port [15]Camera lens [16]](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-11.png)
![SIM card and battery122. SIM card and batteryThe SIM card and its contacts can easily be damaged by scratches or bending, so be careful when handling, inserting, or removing the card.Your device and its enhancements may contain small parts. Keep them out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider or another vendor.Always switch the device off and disconnect the charger before removing the battery.■Remove the back cover Push the back cover release button toward the bottom of the device [1] and at the same time, lift the back cover away from the device [2].■Insert the SIM card and batteryImportant: Insert the battery exactly as shown in the diagram. The contacts on the battery must be aligned with the contacts on the device for the device to operate.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-12.png)
![SIM card and battery13To release the SIM card holder, slide the card holder to the right [4], and open it by lifting it up [5].Insert the SIM card into the SIM card holder [6].Make sure that the SIM card is properly inserted and that the golden contact area on the card is facing downward. Close the SIM card holder [7], and slide it back into place [8].Direct the back cover toward the locking catches on the front cover [9], and slide the back cover until it locks into place [10].](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-13.png)
![About your phone153. About your phone■In-phone helpMany features have brief descriptions [help text] which can be viewed on the display. To view the help text, scroll to a feature and wait for about 15 seconds. Select More to view all of the description [if necessary] or select Back to exit. For instructions on how to turn the help text feature on and off, see ”Phone settings” on page 64.■Start screen [standby mode]The start screen is home base and indicates that the device is in the standby mode.[1] The name of your service provider may appear here.[2] Audible signal bar—A higher bar indicates a stronger network signal.[3] Audible battery bar—A higher bar indicates more power in the battery.[4] Left selection key—The Left selection key in the standby mode opens the Go to menu. For more information, see ”Go to options” on page 62.[5] Menu—Press the Five-way joystick to select the item displayed in the bottom center [middle selection area] of the display screen. In the standby mode, press the joystick to open the Menu.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-15.png)
![About your phone16[6] Right selection key—The Right selection key in the standby mode opens either the Names menu [default], a service provider’s home page, or a user-specified function. For more information, see ”Personal shortcuts” on page 62.■AntennaYour device has an internal antenna. Hold the device as shown with the antenna area pointing up.Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Avoiding contact with the antenna area when operating the device optimizes the antenna performance and the battery life.■Phone basicsYour device can be used with the keyboard open or closed.To open the keyboard, do the following:](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-16.png)
![About your phone19■Key functions [keyboard closed]Power key [1] switches the device on and off. When the keypad is locked, it turns the device display lights on for about 15 seconds.Selection key [2] has no function when the keyboard is closed.Left selection key [3] and Right selection key [3] provide a variety of functions depending on the display text above the keys.Five-way joystick [4] moves in four directions and selects the active menu option when pressed. For details, see ”The five-way joystick” on page 21.Call key [5] dials a device number and answers a call. In the standby mode it accesses the list of most recently called numbers. End key [6] ends an active call or exits from the current function. Keypad [7] enters numbers and characters.Note: Some devices may not display the mobile Internet symbol on the 0 key.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-19.png)
![About your phone20■Key functions [keyboard open]When the keyboard is opened, the display graphics rotate 90 degrees and the Left and Right selection keys change positions. The guiding text near the Left and Right selection keys does not change.Keyboard light key [1] switches the keyboard light on or off.Power key [2] switches the device on and off.Five-way joystick [3] moves in four directions and selects the displayed menu option when pressed.Backspace key [4] deletes characters.Character key [5] opens a set of characters and symbols during text writing.Shift keys [6] enters upper case letters and symbols. You can press the Shift key first, then the desired key; or press both keys at the same time.Space bar keys [7] enters a space.Call key [8] dials a device number and answers a call. In the standby mode it accesses the list of most recently called numbers.Left selection key [9] and Right selection key [9] selects the menu option shown by the text displayed above the key.End key [10] ends an active call or exits from a function.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-20.png)
![About your phone21Enter key [11] starts a new line when writing text. ■The five-way joystickThe Five-way joystick provides a variety of functions:• Allows you to scroll through lists• Moves the cursor up, down, right and left when writing text, using the calendar, and in some game applications• Selects the active menu item when pressed briefly [or confirms a selection]• Adjusts the volume when moved to the left [to decrease volume] or to the right [to increase volume] during a call• Activates the camera when moved up in the standby mode• Opens the text editing screen to write a text message when moved to the left in the standby mode• Opens the calendar when moved to the right in the standby mode• Opens the contacts list when moved down in the standby mode■Indicators and iconsThe following icons may be displayed in the standby mode:–You have one or more text or picture messages. See ”Text messages [SMS] [network service]” on page 33.–The device has logged a missed call. See ”Call register” on page 51. or – Your device is connected to the instant messaging service, and the availability status is online or offline, respectively. See ”Instant messages (Chat)” on page 46. – You have received one or several instant messages, and you are connected to the instant messages service. See ”Instant messages (Chat)” on page 46.– You have one or more multimedia messages. See ”Text messages [SMS] [network service]” on page 33.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-21.png)
![About your phone22– You have one or more voice messages. See”Voice messages” on page 42. – Your device keypad is locked. See ”Lock the keypad [keyguard]” on page 27.– Your device is set to the Silent profile. See ”Profiles” on page 61.– The alarm clock is set to On. See ”Alarm clock” on page 71.– The GPRS connection mode Always online is selected and the GPRS services is available.– You have an incoming or outgoing call during a GPRS dialup connection. GPRS is suspended.– There is an active GPRS connection.– Divert all voice calls. All calls are diverted to another number. If you have two phone lines, the indicator for line 1 is and for line 2.– If you have two phone lines, this indicates that you are on the second phone line. See ”Call settings” on page 64.– Calls are limited to a closed group. See ”Security settings” on page 66.– The timed profile is selected. See ”Profiles” on page 61.– Integrated handsfree is active. See ”Loudspeaker” on page 24., , or – A headset, handsfree, or Nokia Loopset enhancement is connected to the device. – Bluetooth connection indicator. See ”Set up a Bluetooth connection” on page 91.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-22.png)
![Basic operations234. Basic operations■Turn the device on or off1. To turn your device on or off, press and hold the power key as shown.If the device displays Insert SIM card or SIM card not supported, even though the SIM card is properly inserted, contact your service provider.2. If the device asks for a PIN code, enter the PIN code [displayed as ****], and select OK.3. If the device asks for a security code, enter the security code, and select OK.See ”Access codes” on page 28 for more information.■Set the timeSelect Menu > Settings >Time and date settings > Clock >Set the time. Enter the time [in hh:mm format], and select OK >am or pm.■Make and answer callsUse the keypad—Enter the phone number [including the area code], and press Call. To delete a character to the left of the cursor, select Clear. To end the call or to cancel the call attempt, press End.Use contacts—At the start screen, move the Five-way joystick downward to view your contacts, scroll to the entry you want to call, and press Call to make the call.Redial the last number—At the start screen, press Call twice.Make an international call—Press* twice to enter the international prefix [a plus [+] sign] in place of the international access code. Then enter the country code, the area code without a leading zero [if necessary], and the phone number.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-23.png)
![Basic operations24Answer or reject a call—Press Call to answer the call, or press End to reject the call. If Divert if busy is activated to your voice mailbox, the call is diverted to your voice mail. If not, the call is rejected.If you select Silence, only the ringing tone is muted. You can then either answer or reject the incoming call.Answer a call with the keypad locked—See ”Lock the keypad [keyguard]” on page 27.Speed dials—See ”Speed dials” on page 59.Call waiting—See ”Call settings” on page 64. ■Adjust the earpiece volumeTo increase the volume of a call, move the Five-way joystick to the right. To decrease the volume of a call, move the Five-way joystick to the left. When adjusting the volume, a bar chart appears in the display indicating the volume level. See volume control information in ”Call settings” on page 64.You can only adjust the earpiece volume during an active call.■LoudspeakerWarning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.You can use your device as a loudspeaker during a call. To activate the loudspeaker during a call, select Loudspeaker. To deactivate the loudspeaker during a call, select Normal.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-24.png)
![Phone security276. Phone security■Lock the keypad [keyguard]You can lock the keypad to prevent accidental key presses. To answer a call with keyguard on, press Call. During the call, all features function as normal. When you end or reject a call, the keypad automatically relocks.• To lock the keypad, select Menu > #.• To unlock the keypad, select Unlock > #.When the keypad is locked, calls still may be possible to the official emergency number programmed into your device. Enter the emergency number, and press Call.■Automatic keyguardYou can set your device to lock the keys automatically after a time you specify. See ”Phone settings” on page 64 to activate this feature.■The security keyguardThe security keyguard locks the keypad of the device with a security code. The keypad lock remains active, if you open the flip. Select Menu > Settings > Phone settings > Security keyguard.Enter the security code. To set the security keyguard, select On.To activate the security keyguard when the device is closed, select Menu > # within 1.5 seconds. To deactivate the keyguard when the flip is open, select Unlock > OK, and enter the security code. If the device is closed, select Unlock > # within 1.5 seconds, and enter the security code.If you receive a Bluetooth connection request from another device while the security keyguard is activated, you have to deactivate the keyguard before you can accept the connection.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-27.png)
![Writing text297. Writing textYou can enter text and numbers with the keypad open or closed.■Write with the keyboard openWhen the keyboard is open, you can start to write a message in several ways.• Select Menu > Messages > Text messages > Create message.• Move the joystick to the left in standby mode.• Press any of the letter keys in the standby mode to open Notes.Available functionsThe following functions are available when writing text with the keyboard open:• To insert a number, press a number key. [If you press a number key in the standby mode, it initiates a normal call procedure.]• To switch between the lower and upper case, indicated by , , or on the top left of the display, or to insert symbols, press the Shift keys on the keyboard. You can either press a Shift key and the desired character consecutively; or press and hold a Shift key and the desired letter at the same time.• To write in upper case only, press one of the Shift keys twice.• To delete characters from the display, press the Backspace key, or select Clear. Press the Backspace key briefly to clear one character at a time. Use a longer keypress to delete characters more quickly.• To add a space, press one of the Space keys at the bottom of the keyboard.• To create a line break, press the Enter key.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-29.png)
![Writing text30Typing accented charactersThe characters available depend on the language selected in the Phone language menu. To type accented characters or symbols that are not printed on the keyboard, do one of the following:• To access a set of punctuation marks, accented characters, and symbols, press the Character key. Scroll through the character set with the joystick, and select Use to enter the selected character.• To type an accented character that is not included in the list of special characters under the Character key, press and hold the Character key, and simultaneously press A repeatedly until the desired accented variant of A appears on the display.■Write with the keyboard closedYou can use two methods for entering text and numbers with the keyboard closed:•Standard mode [ ] is the only way to enter names into Names and to rename caller groups.•Predictive text input [ ] is a quick and easy method for writing messages.Press the #key to switch predictive text on or off and to use predictive text in various modes.■Standard modePress a key once to insert the first letter on the key, twice for the second letter, etc. If you pause briefly, the last letter in the display is accepted, and your device awaits the next entry. Select Clear to backspace the cursor and delete a character.Select and hold Clear to backspace continuously and delete characters.Press 0 to enter a space and accept a completed word.Press 1 to enter a period [.].Press* to display special characters. See ”Enter punctuation and special characters” on page 32.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-30.png)
![Writing text32Compound wordsEnter the first part of the word and confirm it, by moving the joystick to the right. Enter the last part of the word and confirm it, by moving the joystick to the right.Add new words to the dictionaryIf you encounter a word that predictive text does not recognize, a question mark [?] follows the word and Spell appears in the lower left of the display.Select Spell, enter your new word using the keypad, and select Save. The word is added to the dictionary and to the message that you are writing.Keep these factors in mind when adding words:• New words that you accept by selecting Save, the 0 key, or deleting the space between two words are saved to the dictionary.• Depending on the language and the length of the words, you may be able to add hundreds of words to the dictionary.• When the dictionary is full, the most recent addition replaces the first.■Enter punctuation and special charactersWhile at any text entry screen, press the * key to display special characters [press and hold the * key if predictive text is on].Press the * key twice to display the Graphical smileys menu. Scroll through the list of special characters by using the Five-way joystick. Once a character is highlighted, press the Five-way joystick to insert the character into your message.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-32.png)
![Messages338. MessagesThe message services can only be used if they are supported by your network or your service provider. To select the font size for reading and writing messages, select Menu >Messages> Message settings >Other settings> Font size.Note: When sending messages, your device may display Message sent. This is an indication that the message has been sent by your device to the message centre number programmed into your device. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your service provider.■Text messages [SMS] [network service]Using the SMS [short message service], your device can send and receive multipart messages, which consist of several ordinary text messages. Invoicing may be based on the number of ordinary messages that are required for a multipart message.Before you can send a message, you need to save some message settings. See ”Settings for text and e-mail messages” on page 43.You can also send and receive text messages that contain pictures. A picture message can be a multipart message. Note: Picture message function can only be used if it is supported by your network operator or service provider. Only devices that offer picture message features can receive and display picture messages.Write and send messagesYour device can send text messages beyond the normal 160-character limit. If your message exceeds 160 characters, it is sent as a series of two or more messages. The number of available characters and the current part number of a multipart message are shown on the top right of the](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-33.png)
![Messages34display, [for example 120/2]. Using special [Unicode] characters such as ë, â, á, ì takes up more space.1. Select Menu > Messages > Text messages > Create message.2. Enter a message. See”Writing text” on page 29. To insert text templates or a picture into the message, see ”Templates” on page 35. 3. Select Send, or press Call to send the message.The messages that you send are saved in the Sent items folder if the setting Save sent messages is set to Yes. See ”Settings for text and e-mail messages” on page 43. Text messages are indicated with .4. Enter the recipient’s phone number, or search for the phone number in Names. 5. Select OK to send the message.Options for sending a messageAfter you have write a message, select Options > Sending options and one of the following:Send to many—Send the message to several recipients.Send to list—Send the message to members of a distribution list. Sending profile—Use a predefined message profile to send the message. To define a message profile, see ”Settings for text and e-mail messages” on page 43.Read and reply to message or e-mailWhen you receive a message or an SMS e-mail, the indicator and the number of new messages followed by Messages received is shown. A blinking indicates that the message memory is full. Before you can receive new messages, delete some of your old messages in the Inbox folder. If more than one message is received, select the one that you want to read. An unread text message or SMS e-mail is indicated by .1. Select Show to view the new message or select Exit to view it later.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-34.png)
![Messages37■Multimedia messages [MMS] [network service]Note: Only devices that offer compatible multimedia message features can receive and display multimedia messages. Exercise caution when opening messages. Messages may contain viruses or otherwise be harmful to your device or PC.A multimedia message can contain text, sound, and a picture or a video clip. The device supports multimedia messages that are up to 100 KB in size. If the message contains a picture, the device scales it down to fit the display area.The default setting to receive multimedia messages [Allow multimedia reception] is generally set to Yes or In home network. See ”Settings for multimedia messages” on page 43.Multimedia messaging supports the following formats:• Picture: JPEG, GIF, WBMP, BMP, and PNG.• Sound: Scalable Polyphonic MIDI [SP-MIDI], AMR audio, and monophonic ringing tones.• Video clips in 3GP format with SubQCIF and QCIF resolution and AMR audio.• Themes for the background display on the device screen.The device does not necessarily support all variations of these file formats. If a received message contains any unsupported elements, they may be replaced with the file name and the text Object format not supported.You are not able to receive any multimedia messages if you have a call in progress or a game or another Java application running.Write and send a multimedia messageTo modify multimedia messaging settings, see ”Settings for multimedia messages” on page 43. To check availability and subscribe to the multimedia messaging service, contact your service provider.Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-37.png)
![Messages381. Select Menu >Messages > Multimedia msgs. > Create message.2. Enter a message. See ”Writing text” on page 29.• To insert a file in the message, select Options > Insert and select the desired option from the gallery, or select Calendar note or Business card.To move the text component to the top or bottom of the message, select Options > Place text first or Place text last.• Your device supports the sending and receiving of multimedia messages that contain several pages [slides]. To insert a slide in the message, select Options > Insert >Slide. Each slide can contain text, one image, and one sound clip.If the message contains several slides, to open the desired one, select Options >Previous slide, Next slide, or Slide list. To set the interval between the slides, select Slide timing. • The following options may also be available: Delete [to delete an image, slide, or sound clip from the message], Preview, or Save message. In More options the following options may be available: Insert contact, Insert number, Message details, and Edit subject.3. To send the message, select Send or Options > Send to e-mail or Send to many.4. Enter the recipient’s phone number or e-mail address, or select Search to view contacts saved in Names. While the multimedia message is being sent, is displayed, and you can use other functions on the device. If there is an interruption while the message is being sent, the device tries to resend it a few times. If this fails, the message will remain in the Outbox folder, and you can resend it later.The messages that you send are saved in the Sent items folder if the setting Save sent messages is set to Yes. Multimedia messages are indicated with .For more information, see ”Settings for multimedia messages” on page 43.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-38.png)
![Messages40To delete old messages, first select the folder, then the old message to be deleted. To discard the waiting message, select Exit >Yes; if you select No, you can view the message.■E-mail [network service]You can write, send, and read e-mail with your device. Your device supports POP3 and IMAP4 e-mail servers. Before you can send and retrieve e-mail, you may need to do the following: • Obtain an e-mail account or use your current one. Contact your service provider to confirm compatibility of e-mail providers.• Contact your e-mail service provider to obtain the required e-mail settings.• Set the e-mail settings on your device. Select Menu >Messages > Message settings > E-mail messages. See ”Settings for e-mail application” on page 44.Write and send an e-mail1. Select Menu > Messages > E-mail >Create SMS e-mail.2. Enter the recipient’s e-mail address, a subject, and the e-mail message.3. Select Send.Note: When sending e-mail, your device may display the words E-mail message sent. This is an indication that the e-mail has been sent by your device to the e-mail server. This is not an indication that the e-mail has been received at the intended destination. For more details about e-mail services, check with your service provider.Download e-mail messages1. To download e-mail that has been sent to your e-mail account, select Menu> Messages > E-mail > Retrieve.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-40.png)
![Messages42containing the messages and Yes. To delete all messages from all folders, select All messages > Yes. Deleting an e-mail from your device does not delete it from the e-mail server.■Voice messagesYou can define a phone number of a voice mailbox and a DTMF tone sequence that you want to use with the mailbox [network service]. For more information and for the voice mailbox number, contact your service provider.Select Menu > Messages >Voice messages and one of the following: Listen to voice messages —Call your voice mailbox.Voice mailbox number—Enter, search for, or edit your voice mailbox number. If supported by the network, indicates new voice messages. Select Listen to call your voice mailbox number.Press and hold 1 to call your active voice mailbox if you have the number set.■Info messagesWith the info message network service you may be able to receive messages on various topics. For details, contact your service provider.■Service commandsSelect Menu > Messages >Service commands. Enter and send service requests [also known as USSD commands], such as activation commands for network services, to your service provider.■Delete all messages from a folderTo delete all messages from a folder, select Menu > Messages. Select the message type, and select Delete messages. Select the folder from which you want to delete the messages and select OK to confirm.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-42.png)
![Messages43If the folder contains unread messages, the device will ask whether you want to delete them.■Message settingsThe message settings affect the sending, receiving, and viewing of messages.Settings for text and e-mail messages1. Select Menu > Messages >Message settings > Text messages > Sending profile. 2. Select the message profile that you want to change, and update the following settings as you choose: Message centre number [delivered by your service provider], Messages sent via, Message validity, Default recipient number [text messages] or E-mail server [e-mail], Delivery reports, Use GPRS, Reply via same centre [network service], and Rename sending profile.3. Select Back.4. Select Save sent messages >Yes to set the device to save sent messages in the Sent items folder. If you select No, the sent messages are not saved.Settings for multimedia messagesSelect Menu > Messages >Message settings > Multimedia msgs., and one of the following:Save sent messages—Select Yes to set the device to save sent multimedia messages in the Sent items folder. If you select No, the sent messages are not saved.Delivery reports—Select Yes for the network to send delivery reports about your messages [network service].Scale image down—Select Yes to change the image size when you insert an image into a multimedia message.Default slide timing—Set the default time for slides in multimedia messages.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-43.png)
![Names5211. NamesYou can save names and phone numbers [contacts] in the device memory and in the SIM card memory.• The device memory may save names with numbers and text notes about each name. You can also save an image for a certain number of names.• Names and numbers saved in the SIM card memory, are indicated by .If you subscribe to the presence service, you can set up your contacts list to publish your current availability status [network service]. Your status information is communicated to anyone who has access to the presence service and who is requesting this information. See ”My presence” on page 54 and ”Subscribed names” on page 57.■Contact settingsSelect Menu > Contacts > Settings > Memory in use, Contacts view, or Memory status.■Add contactSelect Menu >Contacts >Add new contact. Enter the name and the phone number. When the name and number are saved, select Done.■Add numbers, text items, or an imageYou can save different types of phone numbers, short text items, and an image per name in the internal device memory for contacts.The first number saved is automatically set as the default number, and it is indicated with a frame around the number type indicator, for example . When you select a name from contacts to make a call, the default number is used unless you select another number.1. Make sure that the memory in use is either Phone or Phone and SIM. See”Contact settings” on page 52.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-52.png)
![Names532. Open your contacts list and scroll to the contact you want to modify.3. Select Details >Options and one of the following:Add number—Select one of the number types, enter the number, and select OK to save it. To set the selected number as the default number, select Set as default.Add detail—Select one of the text types, enter the text [see”Writing text” on page 29], and select OK to save it. If you select User ID, select Search to find an ID by a mobile phone number or an e-mail address if you are connected to the presence service. See ”My presence” on page 54. If only one ID is found, it is automatically saved. Otherwise, to save the ID, select Options > Save. To enter the ID, select Enter ID manually. Enter the ID, and select OK to save it.Add image—When you select this option, Gallery is opened automatically so that you can choose the image. Open the image you want to add, and select Options> Save to contacts.4. Select Back > Exit to return to the standby mode.To change the number or text type, select Change type in the options list. You cannot change the type of an ID when it is on the IM contacts or in the Subscribed names list.■Search for a contactSelect Menu > Contacts > Search, or to find a contact name quickly, scroll down in the standby mode. You can enter the first characters of the name you are searching for in the pop-up window.■Contact optionsThe following options may also be available in the Contacts menu:Add new contact and Delete. Copy—Copy names and phone numbers between the phone contact directory and the SIM card memory.Settings—Select how the names and numbers are displayed, and view the free and used memory capacity. See ”Contact settings” on page 52.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-53.png)
![Names54Speed dials—Assign a number to a speed dial key. To activate speed dial see ”Speed dials” on page 59.Info numbers—Call the information numbers of your service provider if the numbers are included on your SIM card [network service].Service numbers—Call the service numbers of your service provider if the numbers are included on your SIM card [network service].My numbers—View the phone numbers assigned to your SIM card. Only shown, if the numbers are included on your SIM card.Caller groups—Arrange the names and phone numbers saved in the memory into caller groups with different ringing tones.My presence—Share your presence status with other users with compatible devices and access to the service. Subscribed names—Stay informed of your contacts’ presence status by creating a list of subscribed contacts. ■Edit or delete details1. Search for the contact that you want to edit or delete, and select Details.2. Scroll to the name, number, text item, or image that you want to edit or delete, and select Options.3. Select Edit name, Edit number, Edit detail, Change image, Delete number, Delete detail, or Delete image. You cannot edit or delete an ID when it is in IM contacts or in the Subscribed names list.Deleting an image attached to the contact does not delete it from Gallery.■My presenceWith the presence service [network service] you can share your presence status with other users with compatible devices and access to the service. Presence status includes your availability, status message, and personal logo.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-54.png)
![Names55Other users who have access to the service and who are requesting your information are able to see your status. The requested information is shown in Subscribed names in the viewers Names menu. You can personalise the information that you want to share with others and control who can see your status.Before you can use presence, you need to subscribe to the service. Contact your service provider to check the availability and charging details, subscribe to the service, and receive your unique ID and password and the settings for the service. While connected to the presence service, you can use the other functions of the device, and the presence service is active in the background.Log in and out of the presence serviceSelect Menu >Contacts >My presence >Connect to 'My presence' service or Disconnect.Update your presence statusSelect Menu > Contacts > My presence >My current presence, and one of the following:View current presence—Select Private pres. or Public presenceMy availability—Set your availability status to Available [], Busy [], or Not available [].My presence message—Key in the text shown to other persons; or select Options > Previous msgs., and select an old message as the status message.My presence logo—Select your personal logo from the Graphics folder in the gallery. If you select Default, the logo is not published.Show to—Assign the groups who can see your presence status, or choose not to show it at all. Select from the following:•Private and public—Contacts in your private list are able to see all your presence information [availability, status message, and logo]. Other contacts can see only your availability.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-55.png)
![Names56•Private viewers—Contacts in your private list can see all your presence information [availability, status message, and logo]. Other users will not see any information.•No one—No one can see your presence information.Viewers listsTo see who is allowed to view your presence information, select Menu >Contacts > My presence >Viewers, and one of the following: Current viewers—Check all the persons who have subscribed to your presence information.Private list—Check the list of persons who are allowed to view all your presence information, including availability, status message, and logo. You can manage your own private list. Other persons who are not in the private list can see only your availability.Blocked list—View the list of persons you have blocked from viewing your presence information.Presence settingsSelect Menu > Contacts > My presence > Settings, and one of the following:Show current presence in idle—Select On to display the current status indicator in the standby mode.Synchronise with profiles—Select On to update My presence message and My availability manually or automatically by linking them to the currently active profile. See ”Profiles” on page 61. You cannot link a personalised status logo to a profile.Connection type—Select whether the device connects automatically to the service when the device is switched on.IM and my presence settings—View and modify your IM and presence account settings.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-56.png)
![Names57■Subscribed namesYou can stay informed of your contacts’ presence status by creating a list of subscribed contacts. You can view the contacts’ presence status unless the contact or network prevents it. To use this feature, you and the contact[s] you wish to view must subscribe to the presence service [see”My presence” on page 54]. The memory in use must be either Phone or Phone and SIM for this feature to work [see ”Contact settings” on page 52].To connect to the presence service, select Menu > Contacts > My presence > Connect to 'My presence' service.Add contacts to subscribed names1. Select Menu > Contacts > Subscribed names. If you have not connected to the presence service, the device asks if you want to connect now.2. If you have no contacts on your list, select Add. Otherwise, select Options > Subscribe new. The list of your contacts is shown.3. Select a contact from the list, and if the contact has a user ID saved, the contact is added to the subscribed names list. If there is more than one ID, select one of them.After subscription of the contact, Subscription activated is shown.View subscribed namesYou can view the subscribed names either by scrolling through the contacts or by the Subscribed names menu.Select Menu > Contacts > Subscribed names. The first contact on the subscribed names list is displayed and the following status information is shown:• Text describing the contact’s availability [if the person chooses to define it]• Icons that indicate the contact’s presence statusThe icon indicates that the person’s presence information is not available.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-57.png)
![Names58Select Details to view the details of the selected contact, or select Options and one of the following:Subscribe new—Add a new contact to the list of subscribed names.Chat—Start a conversation.Send message—Send a text message to the selected contact.Send SMS e-mail—Send an e-mail to the selected contact.Send bus. card—Send a business card to the selected contact.Unsubscribe—Remove the selected contact from the list of subscribed names.Unsubscribe a contactTo unsubscribe a contact from the Contacts list, scroll down in the standby mode, and scroll to the contact that you want to unsubscribe. Select Details, select the ID, and select Options. To unsubscribe, select Unsubscribe >Yes.To use the Subscribed names menu to unsubscribe, see ”View subscribed names” on page 57.■Send and receive a business cardYou can send and receive a person’s contact information as a business card if you are using a compatible device. When you have received a business card, select Show >Save to save the business card in the device memory. To discard the business card, select Exit >Yes. To send a business card:1. In Contacts, search for the name and phone number that you want to send.2. Select Details > Options > Send bus. card.3. Select Via text message [network service], Via multimedia [network service], Via infrared, or Via Bluetooth.4. Select Default number or All details.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-58.png)
![Settings62■Tone settingsTo change the tone settings for the active profile, select Menu >Settings > Tone settings. Select and change Incoming call alert, Ringing tone, Ringing volume, Vibrating alert, Message alert tone, Instant message alert tone, Keypad tones, and Warning tones. You can find the same settings in the Profiles menu, see ”Profiles” on page 61.Select Alert for to set the device to ring only upon calls from phone numbers that belong to a selected caller group. Scroll to the caller group you want to select or choose All calls > Mark.■Personal shortcutsWith personal shortcuts you get quick access to frequently used device functions. Right selection keySelect Menu > Settings > Personal shortcuts > Right selection key and a device function from the list to assign to the key. See ”Start screen [standby mode]” on page 15. This menu is not shown in some operator variants.Go to optionsTo assign device functions from a predefined list to the Go to shortcut list, select Go to > Options > Select 'Go to' options. Select Go to > Options > Organise 'Go to' options to rearrange the functions on your personal shortcut list. See ”Start screen [standby mode]” on page 15.Voice commandsYou can activate certain device functions by saying a voice command. Up to five functions can be selected for voice commands.Select Menu> Settings> Personal shortcuts >Voice commands. Select the function folder that you want, scroll to the function to which you](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-62.png)
![Settings63want to add a voice command, and select Add. A voice command is indicated with .When you are using voice commands, the same guidelines in ”Make a voice tag call” on page 60 apply.■Display settingsSelect Menu >Settings > Display settings and one of the following:Wallpaper—Set your device to display a background image, known as wallpaper, when the device is in the standby mode.Independent of the screen saver settings, for power saving purposes, a digital clock view will be activated when no function of the device has been used for a certain time.Colour schemes—Change the colour in some display components, such as indicators, the signal bar, the battery bar, and the background image that appears when using a menu function.Menu view—Set the way the device displays the main menu.Operator logo—Set your device to display or hide the operator logo.Screen saver—Select Select s. saver to choose an animation or a still image as screen saver from Gallery. Select in Time-out the time after which the screen saver will be activated. Select On to activate the screen saver. Select Off to deactivate the screen saver.■Time and date settingsSelect Menu > Settings >Time and date settings, and one of the following:Clock—Set the device to show or hide the clock in the standby mode, adjust the clock, and select time zone and the time format.Date—Set the device to show or hide the date in the standby mode, set the date, and select the date format and date separator.Auto-update of date & time [network service]—Set the device to automatically update the time and date according to the current time zone.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-63.png)
![Settings64■Call settingsSelect Menu > Settings > Call settings and one of the following:Call divert [network service]—Divert your incoming calls. For details, contact your service provider. Anykey answer—Select On, and you can answer an incoming call by briefly pressing any key, except Power, or End.Automatic redial—Select On, and your device will make a maximum of 10 attempts to connect the call after an unsuccessful call attempt.Speed dials—Select On. To dial the names and phone numbers assigned to the speed dial keys from 2 to 9, press and hold the corresponding number key.Call waiting—Select Activate for the network to notify you of an incoming call while you have a call in progress [network service]. Summary after call—Select On, and the device will briefly display the approximate duration and cost [network service] of the call after each call.Send my caller ID [network service]—Select Set by network, Yes, or No.Line for outgoing calls [network service]—Select phone line 1 or 2 for making calls. This option is shown only if supported by your SIM card.■Phone settingsSelect Menu >Settings >Phone settings and one of the following:Phone language—Set the display language of your device. If you select Automatic the device selects the language according to the information on the SIM card.Memory status—View the amount of free, used, and total amount of memory for each function. You may also find memory information in the menus of some functions. For more information on shared memory, see ”Shared memory” on page 8.Automatic keyguard—Set the keypad of your device to lock automatically after a preset time delay when the device is in the](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-64.png)
![Settings65standby mode and no function of the device has been used. Select On, and you can set the time from 5 seconds to 60 minutes.When the keyguard is on, calls still may be possible to the official emergency number. Key in the emergency number, and press Call.Security keyguard—See ”The security keyguard” on page 27.Cell info display—Select On to receive information from the network, depending on the network cell used [network service].Welcome note—Key in the note you would like to be shown briefly when the device is switched on. To save the note, select Save.Operator selection—Select Automatic, and the device automatically selects one of the cellular networks available in your area. Select Manual, and you can select a network that has a roaming agreement with your service provider.Confirm SIM service actions—See ”SIM services” on page 90.Help text activation—Select whether the device shows the help texts. Start-up tone—Select whether the device plays a start-up tone when switched on.■Connectivity settingsYou can define the settings for Bluetooth connections, Infrared connections and GPRS dial-up connections. For more information on Bluetooth connections, see ”Bluetooth connectivity” on page 91. For more information on Infrared connections, see ”Infrared” on page 94. For more information on GPRS connections, see ”GPRS” on page 95.■Enhancement settingsThe enhancement settings menu is shown only if the device is or has been connected to a compatible mobile enhancement, charger, or hands-free unit.Select Menu > Settings > Enhancement settings. You can select an enhancement menu if the corresponding enhancement is or has been connected to the device.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-65.png)
![Settings66■Configuration settingsSome of the network services need to have the correct configuration settings on your device. Get the settings from a service provider as a configuration message, or enter your personal settings manually. Configuration settings from up to 10 different service providers can be stored in the device and can be managed within this menu.Select Menu >Settings > Configuration settings and one of the following:Default configuration settings—View the list of service providers stored on the device [the default service provider is highlighted], and select another service provider as default. Scroll to a provider, and select Details to view the list with supported applications. To delete a service provider from the list, select Options > Delete.Activate default in all applications—Set the applications to use the settings from the default service provider.Preferred access point—Select another access point. Normally the access point from your service provider is to be used.To enter, view, and edit the settings manually, select Menu > Settings > Configuration settings > Personal configuration settings. To add a new configuration, select Add new or Options > Add new. Choose one of the application types from the list and enter all the necessary settings. To activate the settings, select Back.To view or to edit the user-defined settings, select the application that you want to view, and select the setting to edit.■Security settingsWhen security features that restrict calls are in use [such as call barring, closed user group, and fixed dialling] calls still may be possible to the official emergency number programmed into your device.Select Menu >Settings > Security settings and one of the following:PIN code request—Set the device to request your PIN code every time the device is switched on. Some SIM cards do not allow the PIN code request to be turned off.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-66.png)
![Settings67Call barring [network service]—Restrict incoming calls to and outgoing calls from your device. A barring password is required.Fixed dialling—Restrict your outgoing calls to selected phone numbers if this function is supported by your SIM card.Closed user group [network service]—Specify the group of people whom you can call and who can call you.Security level—Select Phone for device to request the security code whenever a new SIM card is inserted. Select Memory for the device to request the security code when the SIM card memory is selected and you want to change the memory in use.Access codes—Change the security code, PIN code, PIN2 code, or barring password.■Restore factory settingsTo reset some of the menu settings to their original values, select Menu >Settings > Restore factory settings.■Operator menuThis menu lets you access a portal to services provided by your service provider. This menu is operator specific. The name and the icon depend on the operator. For more information, contact your service provider.The operator can update this menu with a service message. For more information, see ”Service inbox” on page 86.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-67.png)
![Gallery6813. GalleryIn this menu, you can manage graphics, images, video clips, recordings, themes, and tones. These files are arranged in folders.Your device supports a Digital Rights Management [DRM] system to protect acquired content. A piece of content [for example, a ringing tone] can be protected and associated with certain usage rules [for example number of usage times and a certain usage period]. The rules are defined in the activation key of the content, which can be delivered either together with the content or independently, depending on the service provider. You may be able to update these activation keys. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee.Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded.1. Select Menu > Gallery. A list of folders is displayed. Images, Video clips, Themes, Graphics, Tones, and Recordings are the default folders on the device.2. Scroll to a folder, and select Open to view a list of files in the folder or Options to choose from additional options.3. After you open a folder, select the file that you want to view, and select Open. If you selected the Themes folder, scroll to a theme, and select Open >View to view the theme package. To choose it as your theme, select Options > Apply theme.4. After you open a file, you can select Options to choose from additional options.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-68.png)
![Camera6914. CameraYou can take photos or record video clips with the built-in camera. The camera produces pictures in JPEG format and the video clips in 3GP format.The Nokia 6822 device supports an image capture resolution of 640 x 480 pixels. The image resolution in these materials may appear different.■Photos and video clipsSelect Menu > Camera. The live image appears on the display, and you can use the display as a viewfinder. Scroll left and right to change the camera mode: Standard photo, Portrait photo, or Video, or Night mode [if the lighting is dim for taking photos]. If you want to add the photo to a name or a phone number saved in contacts, select Portrait photo.Take a photoSelect Capture. A shutter sound is heard. The device saves the photo in the Images folder of the Gallery menu. If you want to send the photo as a multimedia message, select Send.Select Back to take another photo or Options and select an option to rename or zoom the saved photo, set the contrast, see the details, set the photo as wallpaper, open the gallery, or delete the photo.You can activate the self-timer of the camera for one picture at a time. Put the camera in photo mode, select Options > Self-timer >Start, and after the timeout, the camera takes the photo. While the self-timer is running, a beeping sound is heard.Record a videoTo start recording a video clip, select Record. When you are recording a video clip, the remaining recording time is shown on the top of the display.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-69.png)
![Camera70To pause the recording, select Pause. To resume the recording, select Continue. To stop the recording, select Stop. The device saves the recording in the Video clips folder of the Gallery menu. To view the recorded video clip, select Play. Select Back to start recording a new video clip or Options and select an option to delete or rename the saved video clip, set the contrast, see the details, send it as a multimedia message, open the gallery, or mute/unmute the microphone.■Camera settingsSelect Menu >Camera >Options. Depending on the active camera mode, the following options may appear: Change mode, Self-timer, Mute/Unmute, Open Gallery, Settings [to adjust the camera settings], Default mode, Image quality, Video clip length, Camera sounds, and Default title.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-70.png)
![Organiser73You can sort the notes by priority or by deadline, send a note to another device, save a note as a calendar note, or access the calendar. You can also select an option to edit the selected note, edit the deadline or priority for the note, or mark the note as done.■NotesYou can use this application for writing and sending notes to compatible devices by MMS.Select Menu >Organiser> Notes. The device will ask you to set the date and time if they have not already been set when you start to write a note. To add a note, select Add note. Enter the note, and select Save; or scroll to a note, and select View or Options to see the options for notes.■WalletIn Wallet you can save personal information such as credit card numbers and addresses. The data saved in the wallet can easily be retrieved to automatically fill in data fields when making purchases while browsing, as long as the service supports wallet functionality. You can also save access codes to mobile services that request a user name and password.If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. To empty the cache, see ”Cache memory” on page 86.Set wallet codeThe data in the wallet is protected with a wallet code that you can define when you access the wallet for the first time. At Create wallet code:, enter the code, and select OK to confirm it. At Verify wallet code:, enter the code again, and select OK.Delete wallet contentIf you want to delete all the content of the wallet along with the wallet code, enter *#7370925538# in the standby mode. You also need the device security code [see ”Access codes” on page 28].](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-73.png)
![Organiser74Use the walletTo set up your personal information, use the wallet menu. To use the content of the wallet in a mobile service, access the wallet through the browser [see ”Web” on page 82].To use the wallet feature, select Menu > Applications >Organiser > Wallet. Enter your wallet code, select OK and select one of the following:Wallet profiles—When you have saved your personal card details, you can combine them together into a wallet profile. You can use the profile to retrieve wallet data from different cards while browsing.Cards—Use this option to create and save Payment cards, Loyalty cards, Access cards, User info cards, or Address cards. For availability of receiving card information as configuration settings, contact the card issuer or your service provider.Tickets—Save notifications for e-tickets you have bought through a mobile service.Receipts—Save mobile purchase receipts.Personal notes—Save personal information, such as account numbers, passwords, codes, or notations. Personal notes are protected with the wallet PIN code. When viewing a note, select Options and Send via text msg. to copy the note as a text message; Copy to calendar to copy the note to the calendar as a memo; Use detail to extract numbers, e-mail addresses, and web addresses from a note; and Delete to delete the note you are viewing.Settings—Use this option to change wallet settings.■SynchronisationSynchronisation allows you to save your calendar and contacts data on a remote Internet server [network service] or on a compatible PC. If you have saved data on the remote Internet server, you can synchronise your device by starting the synchronisation from your device. You can also synchronise the data in the contacts list, calendar, and notes of your](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-74.png)
![Applications78Memory status for games and applicationsTo view the amount of memory available for game and application installations [third shared memory], select Menu > Applications > Games or Collection > Memory.■Voice recorderYou can record pieces of speech, sound, or an active call for up to 1 minute and 40 seconds. This is useful when recording a name and phone number to write down later.The recorder cannot be used when a data call or GPRS connection is active.Record1. Select Menu > Applications > Extras > Voice recorder.2. To start the recording, select Record. To start the recording during a call, select Options > Record.While recording a call, all parties to the call will hear a faint beeping sound every 5 seconds approximately.3. To end the recording, select Stop. The recording is saved in the Recordings folder of the Gallery menu.4. To listen to the latest recording, select Play last recorded.5. To send the latest recording, select Send last recorded.List of recordingsSelect Menu > Applications > Extras > Voice recorder >Recordings list. The list of folders in the Gallery is shown. Open Recordings to see the list with recordings.■CalculatorThe calculator in your device adds, subtracts, multiplies, divides, calculates the square and the square root, and converts currency values.1. Select Menu > Applications >Extras >Calculator.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-78.png)
![Web8217. WebYour device has a browser that you can use to access various mobile Internet services.Check the availability of these services, pricing, and tariffs with your service provider.With the browser you can view the services that use Wireless Mark-Up Language [WML] or extensible HyperText Mark-up Language [XHTML] on their pages. Appearance may vary due to screen size. You may not be able to view all the details of the Internet pages. ■Access and use services1. Save the service settings that are required to access the service that you want to use. See ”Set up the device to access a service” on page 82.2. Make a connection to the given service. See ”Connecting to a service” on page 83.3. Start browsing the pages of the service. See ”Browse the pages of a service” on page 83.4. Once you are finished browsing, end the connection to the service. See ”Disconnect from a service” on page 84.■Set up the device to access a serviceYour device may already have some service settings stored. Additional settings may be received as a configuration message from the service provider that offers the service you want to use. For more information and for the appropriate settings, contact your service provider. See also ”Configuration settings” on page 66.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-82.png)
![Web83■Connecting to a serviceMake sure that the service settings of the service you want to use are activated. To activate the settings, select Menu > Web >Settings > Configuration settings > Configuration and select the configuration set you want to activate.Connect to the service by one of the following methods:• Open the homepage of the service provider: select Menu> Web > Home, or in the standby mode, press and hold the 0 key.• Open a bookmark of the service: select Menu > Web > Bookmarks and select a bookmark. If the bookmark does not work with the current active service settings, activate another set of service settings and try again.• Access the last URL: select Menu > Web > Last web addr..• Enter the address of the service: select Menu> Web >Go to address. Enter the address of the service, and select OK.■Browse the pages of a serviceAfter you have connected to the service, you can start browsing its pages. The function of the device keys may vary in different services. Follow the text guides on the device display. For more information, contact your service provider.If GPRS is selected as the data bearer, the indicator is shown on the top left of the display during browsing. If you receive a call or a text message, or make a call during a GPRS connection, the indicator will be shown on the top left of the display to indicate that the GPRS connection is suspended [on hold]. After a call, for example, the device tries to reconnect the GPRS connection. See also ”GPRS connection” on page 95.If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. To empty the cache, see ”Cache memory” on page 86.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-83.png)
![Web85Character encoding—Select the character set that the device uses to show browser pages that do not include that information, or select whether to always use UTF-8 encoding when sending a Web address to a compatible device.■CookiesA cookie is data that a site saves in the cache memory of the browser, [for example, your user information or your browsing preferences]. Cookies will be saved until you clear the cache memory. See ”Cache memory” on page 86.While browsing, select Options > Other options > Security > Cookie settings; or in the standby mode, select Menu >Web > Settings > Security settings > Cookies. Select Allow or Reject to allow cookies or prevent the device from receiving them.■BookmarksYou can save page addresses as bookmarks in the device memory.1. While browsing, select Options >Bookmarks; or in the standby mode, select Menu >Web > Bookmarks.2. Select the bookmark that you want to use and press Select to make a connection to the page associated with the bookmark.Select Options to view the title and the address of the selected bookmark, edit or delete the selected bookmark, send it directly to another device as a bookmark or text message, or create a new bookmark.Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions for security or content as you would with any Internet site.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-85.png)
![Web86Receive a bookmarkWhen you receive a bookmark, 1 bookmark received is displayed. Select Show to view the bookmark. To save the bookmark, select Save. Select Options > View to see the details or Delete to discard it.■DownloadTo download more tones, graphics, games, videos, themes, or applications to your device [network service], select the type of download to receive.Warning: Only install applications from sources that offer adequate protection against harmful software.For the availability of different services, pricing, and tariffs, contact your service provider.■Cache memoryThe information or services that you access are stored in the cache of your device. A cache is a buffer memory, which is used to store data temporarily. To empty the cache while browsing, select Options >Other options > Clear the cache; or in the standby mode, select Menu > Web > Clear the cache.■Service inboxThe device is able to receive service messages [pushed messages] sent by your service provider [network service]. Service messages are, for example, notifications of news headlines, and they may contain a text message or an address of a service.When you receive a service message in the standby mode, select Show to access the message in the Service inbox. If you select Exit, the message is moved to the Service inbox. To access the Service inbox later, select Menu > Web > Service inbox.To access the Service inbox while browsing, select Options > Other options > Service inbox. Scroll to the message that you want, and select Retrieve to activate the browser and download the marked content. To](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-86.png)
![Web88Security module details—Show the security module title, status, manufacturer, and serial number.Module PIN request—Set the device to request the module PIN when using services provided by the security module. Enter the code, and select On. To disable the module PIN request, select Off.Change module PIN—Change the module PIN, if allowed by the security module. Enter the current module PIN code; then enter the new code twice.Change signing PIN—Select the signing PIN that you want to change. Enter the current PIN code, then enter the new code twice.CertificatesThere are three kinds of certificates:Server certificates—Used by the device to create a connection with improved security to the content server. The device receives the server certificate from the service provider before the connection is established, and its validity is checked using the authority certificates saved in the device. Server certificates are not saved.The security indicator is displayed during a connection if the data transmission between the device and the content server is encrypted.The security icon does not indicate that the data transmission between the gateway and the content server [or place where the requested resource is stored] is secure. The service provider secures the data transmission between the gateway and the content server.Authority certificates—Used by some services, such as banking services, for checking the validity of other certificates. Authority certificates can either be saved in the security module by the service provider, or they can be downloaded from the network if the service supports the use of authority certificates.User certificates—Issued to users by a Certifying Authority. User certificates are required [for example, to create a digital signature], and they associate the user with a specific private key on a security module.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-88.png)
![Web89Note: Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime. If Certificate invalid according to phone's date or User certificate not valid yet is shown even if the certificate should be valid, check that the current date and time in your device are correct.Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner.Digital signatureYou can make digital signatures with your device if your SIM card has a security module. The signature can be traced back to you by the private key on the security module and the user certificate that was used to perform the signature. Using the digital signature can be the same as signing your name to a paper bill, contract, or other document. See ”Security module” on page 87.To make a digital signature, select a link on a page, such as the title of the book that you want to buy and its price. The text to sign [possibly including amount, date, etc.] will be shown.Check that the header text is Read and that the digital signature icon is shown.Note: If the digital signature icon does not appear, there is a security breach, and you should not enter any personal data such as your signing PIN.To sign the text, read all of the text first; and then you can select Sign.The text may not fit within a single screen. Therefore, make sure to scroll through and read all of the text before signing.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-89.png)
![Connectivity9118. Connectivity■Bluetooth connectivityBluetooth connectivity enables cost-free wireless connections between electronic devices within a maximum range of 10 meters [30 feet]. A Bluetooth connection can be used to send and receive images, texts, gallery files, voice recordings, video clips, notes, business cards, and calendar notes. It can also be used to connect wirelessly to products that use Bluetooth wireless technology, such as computers. You can synchronise your device and your PC using a Bluetooth connection.Since devices with Bluetooth connectivity communicate using radio waves, your device and the other device do not need to be in direct line-of-sight.The two devices only need to be within a maximum of 10 meters [30 feet] of each other, although the connection can be subject to interference from obstructions such as walls or from other electronic devices. The Bluetooth application consumes the battery and reduces the operating time of the device. Take this into account when performing other operations with your device.There may be restrictions on using devices with Bluetooth connectivity. Check with your local authorities.Your device supports Bluetooth specification 1.1 and the following profiles:• SIM access profile• Object push profileFile transfer profileDial-up networking profileHeadset profileHands-free profileGeneric access profileSerial port profileGeneric access exchange profileFor compatibility between your device and another device with Bluetooth connectivity, use Nokia approved enhancements for this model. Check with the manufacturers of other devices to determine their compatibility with this device.Set up a Bluetooth connection1. Select Menu >Settings > Connectivity > Bluetooth. 2. To activate the Bluetooth function, select Bluetooth > On.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-91.png)
![Connectivity92The active Bluetooth connection is indicated by at the top of the display.3. Select Search for audio enhancements to search for compatible devices with Bluetooth connectivity. The list of found devices appears in the display.4. Select the desired device5. If required, enter the Bluetooth passcode of the device to pair with the device. For information on the Bluetooth passcode, see ”Pairing” on page 92.Your device connects to the device. You can start data transfer.6. To view the device you are connected to, select Active device.7. To deactivate Bluetooth, select Bluetooth > Off.PairingYou can set up a permanent pairing [association] between your device and another device with Bluetooth connectivity. Some devices may require pairing before data transfer can take place.To pair with a device, you and the owner of the other device must agree on a passcode of 1–16 numeric characters. The first time you try to connect the devices, you must each enter the same passcode. Once the devices are paired, you will not need to use the passcode again, so there is no need to remember it.Paired devices are placed in your paired device list. You can view the list even when Bluetooth is not active or when the devices in the list are not available for connection.To view the paired device list, do the following:1. From the menus, select Settings >Connectivity> Bluetooth > Paired devices.2. Scroll to the desired device, and select Options and one of the following:Assign short name—Give a nickname [visible to you only] to the selected device.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-92.png)
![Connectivity94An alarm sounds, and a message appears in the start screen when the transfer is received.• To view the transferred item immediately, select Show. • To save the item for later viewing, select Exit. Depending on the nature of the item, it is saved in the appropriate menu in your device. For example, a business card would be saved in Names, and a calendar note would be saved in Calendar.■InfraredThe device has an IR port that you can use for connecting your device to another IrDA compliant device. You can send or receive data such as business cards and calendar notes to or from a compatible device or data device, such as a computer. Bluetooth connections and IR connections cannot be active at the same time. Do not point the IR [infrared] beat at anyone’s eye or allow it to interfere with other IR devices. This device is a class 1 laser product.Send and receive data• Ensure that the IR ports of the sending and receiving devices are pointing at each other and that there are no obstructions between the devices.• To activate the IR port of your device, select Menu >Settings >Connectivity> Infrared.• The user of the sending device selects the desired IR function to start data transfer.If the data transfer is not started within 2 minutes after the activation of the IR port, the connection is cancelled and has to be started again. Connecting iconWhen blinks continuously, the IR connection has been activated and your device is ready to send or receive data using its IR port.The IR connector deactivates automatically.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-94.png)
![Connectivity95■GPRSGPRS [general packet radio service] is a network service that allows mobile devices to be used for sending and receiving data over an Internet protocol IP-based network. EGPRS [enhanced GPRS], also known as EDGE [enhanced data rates for global evolution], is similar to GPRS. For more information on the availability of EGPRS and data transfer speed, contact your service provider.When you have selected GPRS as a data bearer, the device uses EGPRS instead of GPRS if it is available in the network. You cannot select between EGPRS and GPRS in your device, but for some applications, you may be able to select either GPRS or GSM data [CSD—circuit switched data] as the data bearer. The data bearer is part of the preferred access point and can be changed in Configuration settings [see ”Configuration settings” on page 66].The applications that may use GPRS are MMS, instant messaging, browsing sessions, e-mail, remote SyncML, Java application downloading, and the PC dial-up [for example, Internet and e-mail].Before you can use GPRS technology, contact your service provider for availability of and subscription to the GPRS service and save the GPRS settings for each of the applications used over GPRS.GPRS connectionSelect Menu > Settings > Connectivity > GPRS > GPRS connection and one of the following: Always online—Set the device to automatically register to a GPRS network when you switch the device on.When needed—Set the device to establish GPRS registration and connection when an application using GPRS needs it and to close the connection when you end the application.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-95.png)
![Connectivity96GPRS modem settingsYou can connect the device by a data cable connection to a compatible PC and use the device as a modem to enable GPRS connectivity from the PC. To define the settings for GPRS connections from your PC, select Menu >Settings > Connectivity >GPRS >GPRS modem settings, and one of the following: Active access point—Activate the access point that you want to use.Edit active access point—Change the access point settings:•Alias for access point—Enter a name for the activated access point, and select OK.•GPRS access point—Enter the access point name [APN] to establish a connection to a GPRS network, and select OK. Contact your service provider for the APN.You can also set the GPRS dial-up service settings [access point name] on your PC using the Nokia Modem Options software, see ”PC Suite” on page 97. If you have set the settings both on your PC and on your device, then the PC settings will be used.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-96.png)
![PC connectivity9719. PC connectivityYou can send and receive e-mail and access the Internet when you use Bluetooth, Infrared, or a data cable to connect your device to a compatible PC. You can use a variety of PC connectivity and data communications applications with your device. With PC Suite you can synchronise contacts, calendar, and notes between your device and the compatible PC or a remote Internet server [network service].You may find more information and downloadable files, including PC Suite, in the support area on the Nokia website www.nokia.com.Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded.■PC SuitePC Suite allows you to transfer and synchronise information between your device and your PC. With PC Suite, you can edit contacts in your device, install J2ME Java applications [such as games and dictionaries] from a compatible PC to the device, and backup and restore personal data between your device and a compatible PC. To see the comprehensive features offered by PC Suite, you can download the application from the Nokia website www.nokia.com.■GPRS, EGPRS, HSCSD, and CSDYou can use the following data services with your device:• GPRS [general packet radio service]• EGPRS [enhanced GPRS] [See ”GPRS” on page 95.]• HSCSD [high speed circuit switched data]• CSD [circuit switched data—or GSM data]For availability and subscription to data services, contact your service provider.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-97.png)
![Reference information9920. Reference information■Battery informationCharging and dischargingYour device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, buy a new battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device.Check the model number of any charger before use with this device. This device is intended for use when supplied with power from the ACP-12 charger.Unplug the charger from the electrical plug and the device when not in use. Do not leave the battery connected to a charger. Overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time. Temperature extremes can affect the ability of your battery to charge.Use the battery only for its intended purpose. Never use any charger or battery that is damaged.Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive [+] and negative [-] terminals of the battery. [These look like metal strips on the battery.] This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object.Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C [59°F and 77°F]. A device with a hot or cold battery may not work temporarily,](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-99.png)
![Reference information101• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.• Do not attempt to open the device other than as instructed in this guide.• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics. • Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. • Do not paint the device. Paint can clog the moving parts and prevent proper operation.• Use a soft, clean, dry cloth to clean any lenses [such as camera, proximity sensor, and light sensor lenses].• Use only the supplied or an approved replacement antenna. Unauthorised antennas, modifications, or attachments could damage the device and may violate regulations governing radio devices.All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorised service facility for service.■Additional safety informationOperating environmentRemember to follow any special regulations in force in any area and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions. This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 2.2 cm (7/8 inch) away from the body. When a carry case, belt clip, or holder is used for body-worn operation, it should not contain metal and should position the device at least 2.2 cm (7/8 inch) away from your body.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-101.png)
![Reference information102In order to transmit data files or messages, this device requires a quality connection to the network. In some cases, transmision data files or messages, may be delayed until such a connection is available. Ensure the above separation distance instructions are followed until the transmission is completed.Medical devicesOperation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your phone in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.PACEMAKERSPacemaker manufacturers recommend that a minimum separation of 15.3 cm[6 inches] be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. To minimize the potential for interference, persons with pacemakers should• Always keep the device more than 15.3 cm [6 inches] from their pacemaker when the device is switched on• Not carry the device in a breast pocket• Hold the device to the ear opposite the pacemaker to minimize the potential for interference.If you have any reason to suspect that interference is taking place, switch off your device immediately.HEARING AIDSome digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-102.png)
![Reference information103VEHICLESRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid [antilock] braking systems, electronic speed control systems, air bag systems. For more information, check with the manufacturer or its representative of your vehicle or any equipment that has been added.Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that an air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal.Potentially explosive environmentsSwitch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refuelling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas, chemical plants or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-103.png)
![Reference information104[such as propane or butane], and areas where the air contains chemicals or particles such as grain, dust or metal powders.Failure to observe these instructions may lead to suspension or denial of telephone services to the offender, legal action, or both.EMERGENCY CALLSNote: Wireless phones, including this device, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless phone for essential communications like medical emergencies.To make an emergency call: 1. If the phone is not on, switch it on. Check for adequate signal strength. Some networks may require that a valid SIM card is properly inserted in the phone. 2. Press End as many times as needed to clear the display and ready the phone for calls. 3. Enter the official emergency number for your present location. Emergency numbers vary by location. 4. Press Call.If certain features are in use, you may first need to turn those features off before you can make an emergency call. If the device is in offline or flight mode you must change the profile to activate the phone function before you can make an emergency call. Consult this guide or your service provider. When making an emergency call, give all the necessary information as accurately as possible. Your wireless phone may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so.Certification Information [SAR]THE NOKIA 6822 DEVICE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-104.png)
![Reference information105Your mobile device is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radio frequency [RF] energy recommended by international guidelines [ICNIRP]. These limits establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organisations through periodic and thorough evaluation of scientific studies. The standards and guidelines include a substantial safety margin designed to assure the safety of the public, regardless of age and health and to account for any variations in measurements. The exposure guidelines for mobile devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit stated in the international guidelines is 2.0 W/kg* averaged over ten grams of tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR level of an operating device can be well below the maximum value because the device is designed to use only the power required to reach the network. That amount changes depending on a number of factors such as how close you are to a network base station. The highest SAR value when tested according to international testing procedures for use at the ear is 0.67 W/kg. Your phone’s device type is listed on the label located under the battery.SAR values may vary depending on national reporting and testing requirements and the network band. Use of device accessories and enhancements may result in different SAR values. Additional SAR information in other regions please look under product information at www.nokia.com.USA and Canada: The SAR limit of USA (FCC) and Canada (IC) is 1.6 W/kg averaged over one gram of tissue. Device type PYARM-69 has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 0.43 W/kg and when properly worn on the body is 0.61 W/kg. Information about this device can be found on the FCC’s website at http://www.fcc.gov/oet/fccid by searching the equipment authorization system using FCC ID PYARM-69.](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-105.png)
![Reference information106■Technical informationDimensions— 46.1 mm at hinges, 38 mm at bottom; length—106.1 mm; depth—21.6 mm at top, 17 mm at bottomWeight—100 g with BL-5C 850 mAh semi fixed Li-ion BatterySize [volume]—79 cm3Wireless networks—Nokia 6822: EGSM 900 and GSM 1800 and 1900 networksFrequency range [Tx]— EGSM 900: 880—915 MHz GSM 1800: 1710—1785 MHz GSM 1900: 1850—1910 MHz Frequency range [Rx]—EGSM 900: 925—960 MHz; GSM 1800: 1805—1865 MHz; GSM 1900: 1930—1990 MHzTx output power—2 W [max]Number of channels—299Memory size—16-MB flash memory, approximately 2 MB available to userBattery voltage—3.7 V dcOperating temperature— [14 to +131°F] -10 to +55°C](https://usermanual.wiki/Microsoft/RM-69.Manual/User-Guide-510379-Page-106.png)
