Microsoft RM-58 GSM850/1800/1900 Cellular Telephone w/BT User Manual
Microsoft Mobile Oy GSM850/1800/1900 Cellular Telephone w/BT
Manual
Nokia 6682 User Guide
9237583
ISSUE 1 EN
DECLARATION OF CONFORMITY
We, NOKIA CORPORATION declare under our sole
responsibility that the product RM-58 is in conformity
with the provisions of the following Council Directive:
1999/5/EC. A copy of the Declaration of Conformity
can be found at http://www.nokia.com/phones/
declaration_of_conformity/
Part No. 9237583
Copyright © 2005 Nokia. All rights reserved.
Reproduction, transfer, distribution or storage of part or all of the contents in this
document in any form without the prior written permission of Nokia is prohibited.
Nokia, Nokia Connecting People, and Pop-Port are trademarks or registered
trademarks of Nokia Corporation. Other product and company names mentioned
herein may be trademarks or tradenames of their respective owners.
Nokia tune is a sound mark of Nokia Corporation.
This product includes software licensed from Symbian Software Ltd (c) 1998-
2005. Symbian and Symbian OS are trademarks of Symbian Ltd.
Java™ and all Java-based marks are trademarks or registered trademarks of Sun
Microsystems, Inc.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Stac ®, LZS ®, ©1996, Stac, Inc., ©1994-1996 Microsoft Corporation. Includes one
or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425.
Other patents pending.
Hi/fn ®, LZS ®,©1988-98, Hi/fn. Includes one or more U.S. Patents: No. 4701745,
5016009, 5126739, 5146221, and 5414425. Other patents pending.
Part of the software in this product is © Copyright ANT Ltd. 1998. All rights
reserved.
US Patent No 5818437 and other pending patents. T9 text input software
Copyright (C) 1997-2005. Tegic Communications, Inc. All rights reserved.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for
personal and non-commercial use in connection with information which has been
encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged
in a personal and non-commercial activity and (ii) for use in connection with
MPEG-4 video provided by a licensed video provider. No license is granted or shall
be implied for any other use. Additional information including that relating to
promotional, internal and commercial uses may be obtained from MPEG LA, LLC.
See <http://www.mpegla.com>.
The information contained in this user guide was written for the Nokia 6682
product. Nokia operates a policy of ongoing development. Nokia reserves the right
to make changes to any of the products described in this document without prior
notice.
Under no circumstances shall Nokia be responsible for any loss of data or income
or any special, incidental, consequential or indirect damages howsoever caused.
The contents of this document are provided ‘as is’. Except as required by applicable
law, no warranties of any kind, either express or implied, including, but not limited
to, the implied warranties of merchantability and fitness for a particular purpose,
are made in relation to the accuracy, reliability or contents of this document. Nokia
reserves the right to revise this document or withdraw it at any time without prior
notice
The availability of particular products may vary by region. Please check with the
Nokia dealer nearest to you.
Export Controls
This device may contain commodities, technology or software subject to export
laws and regulations from the US and other countries. Diversion contrary to law is
prohibited.
FCC INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a
telephone in close proximity to receiving equipment). The FCC or Industry Canada
can require you to stop using your telephone if such interference cannot be
eliminated. If you require assistance, contact your local service facility. This device
complies with part 15 of the FCC rules. Operation is subject to the condition that
this device does not cause harmful interference.
For your safety...........................................1
Your phone .................................................5
Insert the SIM or USIM card and battery ....................... 5
Charge the battery ................................................................ 6
Headset..................................................................................... 6
The wrist strap........................................................................ 6
Keypad lock (keyguard)........................................................ 7
Standby mode shortcuts...................................................... 7
Tips for efficient use............................................................. 8
Help ........................................................................................... 8
Access alternate formats..................................................... 8
Register your phone.............................................................. 8
Copyright protection ............................................................ 8
Keys and parts........................................................................ 9
Switch the phone on ..........................................................10
About the display ................................................................10
First settings .........................................................................10
Configure MMS and Internet settings...........................11
Essential indicators.............................................................11
Clock........................................................................................12
Clock settings................................................................12
World clock....................................................................13
Volume and loudspeaker control ....................................13
Insert the memory card .....................................................13
Eject the memory card.......................................................14
File manager ........................................................................ 14
View memory consumption...................................... 15
Memory low—free memory....................................... 15
Memory card tool................................................................ 15
Format a memory card ......................................................16
Personalize your phone ...........................17
Set tones................................................................................17
Offline profile ............................................................... 18
Transfer content ..................................................................18
Themes the look of your phone....................................... 19
Active standby mode.......................................................... 20
Make calls ................................................21
Call ..........................................................................................21
1-touch dialing ............................................................ 21
Conference calling ...................................................... 21
Answer or reject a call.......................................................22
Call waiting...................................................................22
Options ........................................................................... 23
Log...........................................................................................23
Recent calls ..................................................................23
Call duration .................................................................23
Packet data ................................................................... 24
Monitor all communication events........................24
Contacts (phonebook) .............................27
Save names and numbers................................................. 27
Default numbers and addresses .............................. 27
Copy contacts ...................................................................... 28
SIM directory and other services ............................ 28
Ringing tones for contacts............................................... 28
Voice dialing......................................................................... 29
Add a voice tag............................................................ 29
Voice tag call................................................................ 29
Create contact groups ....................................................... 30
Remove members from a group.............................. 30
Camera and Gallery .................................31
Camera................................................................................... 31
Take pictures................................................................. 31
Take pictures in a sequence ..................................... 33
You in the picture—self-timer ................................. 33
The flash......................................................................... 33
Adjust color and lighting .......................................... 33
Adjust camera settings.............................................. 34
Record videos ............................................................... 34
Adjust video recorder settings................................. 35
Gallery .................................................................................... 36
View images.................................................................. 36
Imaging.....................................................38
Video editor .......................................................................... 38
Edit video, sound, and transitions .......................... 38
Image manager.................................................................... 39
Image print ........................................................................... 40
Printer selection........................................................... 40
Print preview ................................................................ 40
Print settings ................................................................ 40
RealPlayer™........................................................................... 40
Play video or sound clips........................................... 41
Stream content over the air..................................... 41
Receive RealPlayer settings...................................... 42
Messaging.................................................43
Writing text .......................................................................... 44
Traditional text input ................................................. 44
Predictive text input—dictionary ............................ 45
Copy text to clipboard ............................................... 46
Write and send messages ................................................. 47
Postcard ......................................................................... 48
Receive MMS and e-mail settings ......................... 49
Inbox....................................................................................... 49
Multimedia messages................................................. 50
Data and settings ........................................................ 50
Web service messages................................................ 51
My folders ............................................................................ 51
Mailbox .................................................................................. 51
Open the mailbox ........................................................51
Retrieve e-mail messages..........................................52
Delete e-mail messages.............................................52
Disconnect from the mailbox...................................53
Outbox ....................................................................................53
View messages .....................................................................54
Messaging settings .............................................................54
Text messages...............................................................54
Multimedia messages.................................................55
E-mail..............................................................................56
Web service messages................................................58
Cell broadcast...............................................................58
Other settings ...............................................................58
Calendar................................................... 61
Create calendar entries......................................................61
Calendar views .............................................................62
Set a calendar alarm...................................................62
Remove calendar entries ...........................................62
Calendar settings.........................................................62
Web.......................................................... 63
Access the Web....................................................................63
Receive browser settings...........................................63
Enter the settings manually .....................................63
Bookmarks view ...................................................................64
Add bookmarks manually.......................................... 64
Send bookmarks........................................................... 64
Make a connection ............................................................. 64
Connection security....................................................65
Browse....................................................................................65
View saved pages ........................................................ 66
Download and purchase items........................................66
End a connection.................................................................67
Empty the cache..........................................................67
Web settings.........................................................................67
Office........................................................69
Info print—powered by HP................................................69
Calculator.............................................................................. 69
Calculate percentages................................................69
Converter...............................................................................69
Set base currency and exchange rates..................70
To-do....................................................................................... 70
Create a task list..........................................................70
Notes.......................................................................................71
Recorder.................................................................................71
My own.....................................................72
Go to—add shortcuts..........................................................72
Delete a shortcut.........................................................72
Wallet .................................................................................... 72
Create a wallet code .................................................. 73
Store personal card details....................................... 73
Create personal notes ................................................ 73
Create a wallet profile ............................................... 74
View ticket details....................................................... 74
Wallet settings............................................................. 74
Reset the wallet and wallet code ........................... 75
IM—instant messaging (chat).................76
Receive IM settings ............................................................ 76
Connect to a server ............................................................ 76
Modify your settings.......................................................... 76
Search for groups and users ............................................ 77
Join and leave a group ...................................................... 77
Chat ........................................................................................ 77
Record chats ................................................................. 78
View and start conversations .......................................... 78
Contacts................................................................................. 79
Manage groups.................................................................... 80
Administer a group............................................................. 80
Create a new group .................................................... 80
Add and remove group members............................ 81
Chat server settings............................................................ 81
Connectivity .............................................82
Bluetooth connection ........................................................ 82
Bluetooth connection settings ................................ 82
Send data....................................................................... 83
Pair devices ................................................................... 84
Receive data ................................................................. 84
Switch off Bluetooth.................................................. 85
PC connections .................................................................... 85
CD-ROM......................................................................... 85
Your phone as a modem............................................ 85
Connection manager.......................................................... 85
View data connection details .................................. 86
Remote synchronization ................................................... 86
New synchronization profile .................................... 87
Synchronize data......................................................... 87
Device manager................................................................... 88
Server profile settings................................................ 88
Tools..........................................................89
Settings.................................................................................. 89
Phone settings.............................................................. 89
Call settings .................................................................. 90
Connection settings.................................................... 91
Date and time............................................................... 93
Security .......................................................................... 94
Call diverting ................................................................ 97
Call restriction.............................................................. 97
Network.......................................................................... 97
Enhancement settings................................................98
Voice commands..................................................................98
Add a voice command to an application ..............98
Application manager ..........................................................99
Install applications and software............................99
Remove applications and software ..................... 100
Application settings................................................. 101
Activation keys—handle copyright-protected files. 101
Troubleshooting .................................... 103
Q&A...................................................................................... 103
Enhancements....................................... 106
Power....................................................................................106
Data.......................................................................................106
Audio.....................................................................................106
Accessibility ........................................................................107
Car .........................................................................................107
Imaging and lifestyle........................................................107
Care and maintenance ......................... 108
Reference information ......................... 109
8
1
For your safety
Read these simple guidelines. Not following them may be
dangerous or illegal. Read the complete user guide for
further information.
SWITCH ON SAFELY Do not switch the phone
on when wireless phone use is prohibited or
when it may cause interference or danger.
ROAD SAFETY COMES FIRST Obey all local
laws. Always keep your hands free to operate
the vehicle while driving. Your first
consideration while driving should be road
safety.
INTERFERENCE All wireless phones may be
susceptible to interference, which could affect
performance.
SWITCH OFF IN HOSPITALS Follow any
restrictions. Switch the phone off near medical
equipment.
SWITCH OFF IN AIRCRAFT Follow any
restrictions. Wireless phones can cause
interference in aircraft.
SWITCH OFF WHEN REFUELLING Don’t use
the phone at a refuelling point. Don’t use near
fuel or chemicals.
SWITCH OFF NEAR BLASTING Follow any
restrictions. Don’t use the phone where
blasting is in progress.
USE SENSIBLY Use only in the normal
position as explained in the product
documentation. Don’t touch the antenna
unnecessarily.
QUALIFIED SERVICE Only qualified personnel
may install or repair this product.
ENHANCEMENTS AND BATTERIES Use only
approved enhancements and batteries. Do not
connect incompatible products.
WATER-RESISTANCE Your phone is not
water-resistant. Keep it dry.
BACK-UP COPIES Remember to make
back-up copies or keep a written record of all
important information.
2
CONNECTING TO OTHER PHONES When
connecting to any other phone, read its user
guide for detailed safety instructions. Do not
connect incompatible products.
EMERGENCY CALLS Ensure the phone
function of the phone is switched on and in
service. Press End as many times as needed to
clear the display and return to the start
screen. Enter the emergency number, then
press Call. Give your location. Do not end the
call until given permission to do so.
About your device
The wireless device described in this guide is approved for
use on the EGSM 850, 1800, and 1900 networks. Contact
your service provider for more information about
networks.
When using the features in this device, obey all laws and
respect privacy and legitimate rights of others.
Warning: To use any features in this device, other
than the alarm clock, the phone must be switched
on. Do not switch the device on when wireless
phone use may cause interference or danger.
Network Services
To use the phone you must have service from a wireless
service provider. Many of the features in this device
depend on features in the wireless network to function.
These Network Services may not be available on all
networks or you may have to make specific arrangements
with your service provider before you can utilize Network
Services. Your service provider may need to give you
additional instructions for their use and explain what
charges will apply. Some networks may have limitations
that affect how you can use Network Services. For
instance, some networks may not support all language-
dependent characters and services.
Your service provider may have requested that certain
features be disabled or not activated in your device. If so,
they will not appear on your device menu. Contact your
service provider for more information.
This wireless device is a 3GPP GSM Release 99 terminal
supporting GPRS service, and is designed to support also
Release 97 GPRS networks. However, there may be some
compatibility issues when used in some Release 97 GPRS
networks. For more information, contact your service
provider.
This device supports WAP 2.0 protocols (HTTP and SSL) that
run on TCP/IP protocols. Some features of this device, such
as MMS, browsing, e-mail, and content downloading using
3
browser or over MMS, require network support for these
technologies.
Enhancements, batteries, and
chargers
Check the model number of any charger before use with
this phone. This phone is intended for use when supplied
with power from ACP-7, ACP-8, ACP-9, ACP-12, and
LCH-12.
Warning: Use only batteries, chargers, and
enhancements approved by Nokia for use with this
particular model. The use of any other types may
invalidate any approval or warranty, and may be
dangerous.
For availability of approved enhancements, please check
with your dealer. When you disconnect the power cord of
any enhancement, grasp and pull the plug, not the cord.
Your phone and its enhancements may contain small parts.
Keep them out of reach of small children.
4
Your phone
5
Your phone
Insert the SIM or USIM card and
battery
1With the back of
the phone facing
you, press the
release button
(1), and slide the
cover in the
direction of the
arrow (2).
2Lift the cover (3).
3To release the SIM
card holder, slide the
holder in the
direction of the
arrow (4), and open
it (5).
4Insert the SIM or
USIM card into the
holder (6). Make
sure that the
bevelled corner (7)
on the SIM card is
facing upward from
the holder and that
the contact area on
the card is facing
the connectors on
the device.
5Close the SIM card
holder (8), and lock
it into place (9).
Your phone
6
6Insert the battery
(10).
7Replace the back
cover.
Charge the battery
1Connect the
charger to a wall
outlet.
2Connect the
power cord to the
phone.
The battery
indicator bar
starts scrolling. The phone can be used while charging.
If the battery is completely discharged, it may take a
few minutes before the charging indicator is shown.
3When the battery is fully charged, the bar stops
scrolling. Disconnect the charger, first from the phone,
then from the wall outlet.
Headset
Connect the
compatible headset
to the Pop-Port™
connector of your
phone.
Warning: This headset may affect your ability
to hear sounds around you. Do not use this
headset in situations that may not be safe.
The wrist strap
Thread the strap and then tighten it.
Note: Use only
Nokia approved
enhancements.
Your phone
7
Keypad lock (keyguard)
Use the keypad lock to prevent the keys from being
accidentally pressed.
To lock the keypad, in the standby mode, press the left
selection key, then *. When the keys are locked, is
shown on the display.
To unlock the keypad, press the left selection key, then
*
.
When the keypad lock is on, calls still may be possible to
the official emergency number programmed into your
device. Enter the emergency number, and press the call
key.
To turn on the display light when the keypad lock is on,
press the power key.
Standby mode shortcuts
To switch between
applications that are open,
press and hold the menu
key. If memory is low, the
phone may close some
applications. The phone
saves any unsaved data
before closing an
application.
To open Camera, scroll up.
To open Contacts, scroll down.
To open Calendar, scroll right.
To write a new text message, scroll left.
To change the profile, press the power key, and select a
profile.
To open the last dialled numbers list, press the call key.
To use voice commands, press and hold the voice key.
To start a connection to Web, press and hold 0.
Your phone
8
Tips for efficient use
To mark an item in a list, scroll to it, and press the edit and
scroll keys at the same time.
To mark multiple items in a list, press and hold the edit key,
while you scroll up and down. A check mark is placed next to
the selected items.
To end the selection, release the scroll key, then release the
edit key. After you select all the items you want, you can
move or delete them.
In some situations, when you press the scroll key, a shorter
options list shows the main commands available in the view.
To copy and paste text: To select letters and words, press and
hold the edit key, and scroll up and down. As the selection
moves, text is highlighted. To copy the text to clipboard,
simultaneously press and hold the edit key and select Copy.
To insert the text into a document, simultaneously press and
hold the edit key and select Paste.
Help
Your phone has a help function. To access it from
an application, select Options > Help.
For example: To view instructions on how to create a contact
card, start to create a contact card, and select Options >
Help; or select Tools > Help to open the instructions for
Contacts. When you are reading the instructions, to switch
between Help and the application that is open in the
background, press and hold the menu key.
Accessibility solutions
Nokia is committed to making mobile devices easy to use for
all individuals, including those with disabilities. For more
information, visit www.nokiaaccessibility.com.
Register your phone
Make sure to register your phone at
www.warranty.nokiausa.com or 1-888-NOKIA-2U (1-888-
665-4228) so that we can serve your needs better if you
should need to call the center or have your device repaired.
Copyright protection
Copyright protections may prevent some images, ringing
tones, and other content from being copied, modified,
transferred, or forwarded.
Your phone
9
Keys and parts
Power key (1)
Memory card slot
(2)
End key (3)
The clear key (4)
deletes text and
items.
The edit key (5)
opens a list of
commands when
you edit text, such
as Copy, Cut, and
Paste.
Press and hold 0 (6)
as a shortcut to a
Web connection.
Microphone (7)
A 5-way scroll key (8) to move around the menus. Press the
Scroll key in the middle to select, accept, or activate.
The menu key (9) opens the main menu, as shown in the
picture.
Call key (10)
The left and right selection keys (11) select the commands
and items shown on the display.
Earpiece (12)
The light sensor (13) constantly observes the lighting
conditions. May cause the display and keypad to flash in
low light.
Loudspeaker outlet (14)
Press the voice key
(15) during a call
to change
between the
handset and
loudspeaker. Press
and hold the voice
key in the standby
mode to activate
voice commands.
With the keypad
lock on, open the
camera slide (16)
to activate the
camera. Closing
the camera slide
returns the phone
to the previous
mode.
Your phone
10
Charger connector (17)
Pop-Port connector (18) for the USB data cable, headset,
and other enhancements.
LED flash (19)
Camera (20) for high resolution image capture or video
recording.
Switch the phone on
Press and hold the
power key.
If the phone asks for a
PIN code, UPIN code,
or lock code, enter the
code (displayed as
****), and select OK.
The PIN or UPIN code
is usually supplied with the SIM or USIM card. The factory
setting for the lock code is 12345.
Your device has a built-in antenna.
Note: As with any other radio
transmitting device, do not
touch the antenna
unnecessarily when the
device is switched on. Contact with
the antenna affects call quality and
may cause the device to operate at a
higher power level than otherwise
needed. Avoiding contact with the
antenna area when operating the device optimizes the
antenna performance and the battery life.
About the display
Remove the protective plastic film covering the display.
A small number of missing, discolored, or bright dots may
appear on the screen. This is a characteristic of this type of
display. Some displays may contain pixels or dots that
remain on or off. This is normal, not a fault.
First settings
1When you switch on the phone for the first time, it may
ask you to set the following information:
City, Time, and Date: Use the scroll key and number
keys. Enter the first letters of the city name to find the
Your phone
11
city. The city selected also defines the time zone for the
clock in your phone.
2Press the menu key to open the main menu.
Note: Your service provider/network operator may
have requested a different order for menu items or
the inclusion of different icons in the phone menu.
Contact your service provider, network operator, or
Nokia Customer Care for assistance with any
features that differ from those described in this
guide.
Configure MMS and Internet
settings
Your Nokia 6682 device has a configuration tool, which
automatically configures MMS, GPRS, streaming, and
Internet settings based on your service provider
information. You may also have settings from your service
providers already in your phone.
Essential indicators
The phone is being used in a GSM network.
You have received one or several messages to the
Inbox folder in Messaging.
There are messages waiting to be sent in the Outbox
folder.
and You have missed calls.
Shown if Ringing type is set to Silent and Message
alert tone, IM alert tone, and E-mail alert tone are set to
Off.
The phone keypad is locked.
You have an active clock alarm.
The second phone line is being used.
All calls to the phone are diverted to another number.
If you have two phone lines, the divert indicator for the
first line is and for the second line is .
A headset, music stand, or Bluetooth device is
connected to the phone.
A loopset is connected to the phone.
A car kit is connected to the phone.
The connection to a Bluetooth-enabled headset has
been lost.
A data call is active.
A GPRS or EDGE packet data connection is available.
A GPRS or EDGE packet data connection is active.
A GPRS or EDGE packet data connection is on hold.
Your phone
12
Bluetooth connectivity has been set to On.
Data is being transmitted using a Bluetooth
connection.
A USB connection is active.
You have an e-mail that has been read, waiting for
you to retrieve to your phone.
You have an e-mail that has not been read, waiting
for you to retrieve to your phone.
Clock
Options in Clock are Set alarm, Reset alarm,
Remove alarm, Settings, Help, and Exit.
Press the menu key, and select Clock.
To set a new alarm, select Options > Set alarm. Enter the
alarm time, and select OK. When the alarm is active, the
indicator is shown.
To turn off the alarm, select Stop. When the alarm tone
sounds, press any key, or select Snooze to stop the alarm
for five minutes, after which it will resume. You can do
this a maximum of five times.
If the alarm time is reached while the device is switched
off, the device switches itself on and starts sounding the
alarm tone. If you select Stop, the device asks whether you
want to activate the device for calls. Select No to switch
off the device or Yes to make and receive calls. Do not
select Yes when wireless phone use may cause
interference or danger.
To cancel an alarm, select Clock > Options > Remove
alarm.
Clock settings
To change the clock settings, select Options > Settings in
the clock.
To change the clock shown in the standby mode, scroll
down, and select Clock type > Analogue or Digital.
To allow the mobile phone network to update the time,
date, and time zone information to your phone (network
service), scroll down, and select Auto time update. For the
Auto time update setting to take effect, the phone
restarts.
To change the alarm tone, scroll down, and select Clock
alarm tone.
To change the daylight-saving time status, scroll down,
and select Daylight-saving. Select On to add one hour to
the My home city time. See "World clock," page 13. When
the daylight-saving is active, the indicator is shown in
the clock main view.
Your phone
13
World clock
Open Clock, and scroll right to open the world clock view.
In the world clock view, you can view the time in different
cities.
To add cities to the list, select Options > Add city. Enter
the first letters of the city name. The search field appears
automatically, and the matching cities are displayed.
Select a city. You can add a maximum of 15 cities to the
list.
To set your current city, scroll to a city, and select
Options > My home city. The city is displayed in the main
clock view, and the time in your phone is changed
according to the city selected. Check that the time is
correct and matches your time zone.
Volume and loudspeaker control
When you are in an active call or are
listening to music or speech, scroll
right to increase or left to decrease the
volume.
The built-in loudspeaker allows you to speak and listen to
the phone from a short distance without having to hold the
phone to your ear. Sound applications use the loudspeaker
by default.
To locate the loudspeaker, see ‘Keys and parts’ in the Quick
start guide.
To use the loudspeaker during a call, start a call, and press
the voice key.
Important: Do not hold the phone near your ear
when the loudspeaker is in use, because the
volume may be extremely loud.
To turn off the loudspeaker when you have an active call
or are listening to a sound, press the voice key.
Insert the memory card
Use your memory card to save the memory on your phone.
The sales package includes the following:
The memory card (reduced size multimedia card,
RSMMC).
The multimedia card (MMC) adapter.
The adapter is not needed when you use the memory card
in your phone. The adapter allows you to use the memory
card in another device that has a full-size MMC slot.
Your phone
14
1To insert the
memory card,
open the door (1)
of the memory
card slot. With
the phone facing
down, place your
finger in the
recess on top of
the door and pull out the bottom of the door.
2Insert the memory
card in the slot (2).
Make sure that the
bevelled corner is
facing towards the
base of the phone
and that the
contact area on
the card is facing
down.
3Push the card in (3). You can
hear a click when the card
locks into place.
4Close the door. You cannot use
the memory card if the door is
open.
Eject the memory card
1Open the door of the memory
card slot.
2Press the memory card to
release it from the slot.
3Remove the memory card. If
your phone is switched on, press
OK.
File manager
Many features of the phone use memory to store data.
These features include contacts, messages, images, ringing
tones, calendar and to-do notes, documents, and
downloaded applications. The free memory available
depends on how much data is already saved in the phone
memory. You can use a memory card as extra storage
space. Memory cards are rewritable, so you can delete and
save data on a memory card.
To browse files and folders in the phone memory or on a
memory card (if inserted), press the menu key, and select
Tools > File mgr.. The phone memory view ( ) opens.
Scroll right to open the memory card view ( ).
Your phone
15
To move or copy files to a folder, simultaneously press the
edit and scroll keys to mark a file, and select Options >
Move to folder or Copy to folder.
The icons in File mgr. are a folder ( ), and a folder with
a subfolder ( ).
To find a file, select Options > Find and the memory from
which to search, and enter a search text that matches the
file name.
Tip! You can use Nokia Phone Browser available in
Nokia PC Suite to view the different memories in your
phone. See the CD-ROM supplied in the sales package.
View memory consumption
To view the types of data in the phone and how much
memory the different data types consume, select
Options > Memory details. Scroll down to Free memory to
view the amount of free memory in the phone.
To view the amount of free memory on the memory card,
if you have a card inserted in the phone, scroll right to
open the memory card view, and select Options > Memory
details.
Memory low—free memory
The phone notifies you if the phone memory or memory
card memory is getting low.
To free phone memory, transfer data to a memory card in
the file manager. Mark files to be moved, select Move to
folder > Memory card and a folder.
To remove data to free memory, use File mgr., or go to the
respective application. You can remove the following
data:
• Messages from Inbox,
Drafts, and Sent folders
in Messaging
• Retrieved e-mail
messages from the phone
memory
• Saved Web pages
• Saved images, videos, or
sound files
• Contact information
• Calendar notes
• Downloaded applications.
See ‘Application manager’, p. 99.
• Any other data that you no longer need
Memory card tool
Your phone
16
Note: This device uses a reduced size dual voltage
(1.8/3V) multimedia card (MMC). To ensure
interoperability, use only dual voltage MMCs.
Check the compatibility of an MMC with its
manufacturer or provider.
Press the menu key, and select Tools > Memory. You can
use a memory card as extra storage space. See “Inserting
the memory card” in the Quick start guide. You can also
back up information from phone memory, and restore the
information to the phone later.
You cannot use the memory card if the door of the
memory card slot is open.
Keep all memory cards out of the reach of small children.
Do not open the memory card slot door in the middle of
an operation. Opening the slot door may damage the
memory card as well as the device, and data stored on the
card may be corrupted.
Options in the memory card tool are Backup
phone mem., Restore from card, Format mem.
card, Memory card name, Memory details, Help,
and Exit.
Use only compatible MMCs with this device. Other
memory cards, such as secure digital (SD) cards, do not fit
in the MMC card slot and are not compatible with this
device. Using an incompatible memory card may damage
the memory card as well as the device, and data stored on
the incompatible card may be corrupted.
To back up information from phone memory to a memory
card, select Options > Backup phone mem.
To restore information from the memory card to the phone
memory, select Options > Restore from card.
Format a memory card
When a memory card is formatted, all data on the card is
permanently lost.
Tip! To rename a memory card, select Options >
Memory card name.
Some memory cards are supplied preformatted and others
require formatting. Consult your retailer to find out if you
must format the memory card before you can use it.
To format a memory card, select Options > Format mem.
card. Select Yes to confirm. When formatting is complete,
enter a name for the memory card, and select OK.
Personalize your phone
17
Personalize your phone
You can customize many features on your Nokia 6682,
such as the background image, theme, ringing tone,
profile, clock preferences, and shortcuts.
Note: Your service provider or network operator
may have requested a different order for menu
items, or the inclusion of different icons in the
phone menu. Contact your service provider or
network operator or Nokia Customer Care for
assistance with any features that differ from those
described in this guide.
To change the shortcuts assigned for the different presses
of the scroll key and selection keys in the standby mode,
see ‘Standby mode’, p. 89.
To change the clock shown in the standby mode, select
Clock > Options > Settings > Clock type > Analogue or
Digital.
To change the clock alarm tone, select Clock > Options >
Settings > Clock Alarm tone and a tone.
To change the calendar alarm tone, select Calendar >
Options > Settings.
To change the welcome note to an image or text, select
Tools > Settings > Phone > General > Welcome note or
logo.
To assign an individual ringing tone to a contact, select
Contacts. See ‘Ringing tones for contacts’, p. 28.
To assign a 1-touch dial (speed dial) to a contact, press a
numbered key in the standby mode (1 is reserved for the
voice mailbox), and press the call key. Select a contact. To
change the 1-touch dialing status (press and hold a 1-
touch dial key in the standby mode) to Off, select Tools >
Settings > Call > Speed dialling.
To rearrange the main menu, in the main menu, select
Options > Move, New folder or Move to folder. You can
move less used applications into folders, and place
applications that you use more often into the main menu.
Set tones
To set and customize the ringing tones, message alert
tones, and other tones for different events, environments,
or caller groups, press the menu key, and select Tools >
Profiles. You can see the currently selected profile at the
top of the display in the standby mode. If the General
profile is in use, only the current date is shown.
Personalize your phone
18
To change the profile, press the power key in the standby
mode. Scroll to the profile you want to activate, and select
OK.
Tip! You can choose Tone downloads to open a list
of bookmarks. You can select a bookmark and start
connection to a Web page to download tones.
To modify a profile, select Tools > Profiles. Scroll to the
profile, and select Options > Personalise. Scroll to the
setting you want to change, and press the scroll key to
open the choices. Tones stored on the memory card are
indicated with . Scroll through the tone list and listen
to each one before you make your selection. Press any key
to stop the sound.
To create a new profile, select Options > Create new.
Offline profile
The Offline profile lets you use the phone without
connecting to the wireless network. When you activate
the Offline profile, the connection to the wireless network
is turned off, as indicated by in the signal strength
indicator. All wireless phone signals to and from the
device are prevented. If you try to send messages, they are
placed in the outbox to be sent later.
Tip! For information on how to change the alert
tone for the calendar or clock, see ‘Personalize your
phone’, p. 17.
Warning: In Offline profile you cannot make (or
receive) any calls, including emergency calls, or use
other features that require network coverage. To
make any calls, you must first activate the phone
function by changing profiles. If the device has
been locked, you must enter the unlock code before
you can activate the phone function and make any
emergency calls.
Warning: Your device must be switched on to use
Offline profile. Do not switch the device on when
wireless device use is prohibited or when it may
cause interference or danger.
To leave the Offline profile, select another profile and
Options > Activate > Yes. The phone re-enables wireless
transmissions (providing there is sufficient signal
strength). If a Bluetooth connection is activated before
entering the Offline profile, it will be deactivated. A
Bluetooth connection is automatically reactivated after
leaving the Offline profile. See ‘Bluetooth connection
settings’, p. 82.
Transfer content
You can copy contacts, calendar, images, video, and sound
clips using a Bluetooth connection, from a compatible
Nokia Series 60 phone.
Personalize your phone
19
You can use your Nokia 6682 device without a SIM card.
Offline profile is automatically activated when the phone
is switched on without a SIM card. This allows you to use
the SIM card in another phone.
Before starting the transfer to your Nokia 6682 device, you
must activate Bluetooth connectivity on both phones. On
each phone press the menu key, and select Connect. >
Bluetooth. Select Bluetooth > On. Give a name to each
phone.
To transfer context:
1Press the menu key, and select Tools > Transfer. Follow
the instructions on the screen. The phone searches for
devices with Bluetooth connectivity.
2When the search is finished, select your other phone
from the list.
3Enter a code (1-16 digits), and select OK.
4Enter the same code on the other phone, and select OK.
The Transfer application is sent to the other phone as a
message.
5Open the message to install Transfer on the other
phone, and follow the instructions on the screen. The
application is added to the main menu.
6From your Nokia 6682 device, select the content you
want to copy from the other phone.
Content is copied from the memory and memory card of
the other phone to your Nokia 6682 device and memory
card. Copying time depends on the amount of data to be
transferred. You can cancel copying and continue later.
Themes-the look of your
phone
To change the look of your phone display, such as the
wallpaper, color palette, and icons, press the menu key,
and select Tools > Themes. The active theme is indicated
by . In Themes, group together elements from other
themes, or select images from the Gallery to personalize
themes further. The themes on the memory card are
indicated by .
Options in the Themes main view are Preview/
Theme downloads, Apply, Edit, Copy to mem. card,
Copy to phone mem., Help, and Exit.
To activate a theme, scroll to it, and select Options >
Apply.
To preview a theme, scroll to it, and select Options >
Preview.
To edit themes, scroll to a theme, and select Options >
Edit to change the following options:
Wallpaper—The image to be shown as a background image
in the standby mode.
Colour palette—The colors used on the screen.
Personalize your phone
20
Screen saver—The screen saver type: date and time, or a
text you have written yourself.
Image in ’Go to’—The background image for the Go to
application.
To restore the selected theme back to its original settings,
select Options Restore orig. theme when you edit a theme.
Active standby mode
Use your standby display for fast access to your most
frequently used applications.
To set the active standby mode on, press the menu key,
select Tools > Settings > Phone > Standby mode >
Active standby, and press the scroll key.
The active standby display is
shown with default
applications across the top
of the screen, and calendar,
to-do, and player events
listed below.
Select an application or
event.
The standard scroll key
shortcuts available in the
standby mode cannot be used when the active standby
mode is on.
1To change the default applications shortcuts, press the
menu key, select Tools > Settings > Phone > Standby
mode > Active standby apps., and press the scroll key.
2Highlight a shortcut to an application, and select
Options > Edit.
3Select a new application from the list, and press the
scroll key.
Some shortcuts may be permanent, and you are not able to
change them.
Make calls
21
Make calls
Call
Tip! To increase or decrease the volume during a
call, scroll left or right.
1In the standby mode, enter the phone number,
including the area code. Press the clear key to remove
a number.
For international calls, press * twice for the + character
(replaces the international access code), and enter the
country code, area code (omit the leading zero if
necessary), and phone number.
2Press the call key to call the number.
3Press the end key to end the call (or to cancel the call
attempt).
Tip! To change the phone number of your voice
mailbox, press the menu key, and select Tools >
Voice mailbox > Options > Change number. Enter
the number (obtained from your service provider),
and select OK.
Pressing the end key always ends a call, even if another
application is active.
To make a call from Contacts, press the menu key, and
select Contacts. Scroll to the desired name; or enter the
first letters of the name to the search field. Matching
contacts are listed. Press the call key.
To call your voice mailbox (network service), press and
hold 1 in the standby mode. See ‘Call diverting’, p. 97.
To call a recently dialed number in the standby mode,
press the call key to access a list of the 20 last numbers
you called or attempted to call. Scroll to the number you
want, and press the call key to call the number.
1-touch dialing
To assign a phone number to one of the 1-touch dialing
(speed dial) keys (2—9), press the menu key, and select
Tools > Speed dial. Key 1 is reserved for the voice
mailbox.
To call in the standby mode, press the 1-touch dial key and
the call key.
Tip! To 1-touch dial a number by pressing and
holding the key, press the menu key, and select
Tools > Settings > Call > Speed dialling > On.
Conference calling
1Make a call to the first participant.
Make calls
22
2To make a call to another participant, select Options >
New call. The first call is automatically put on hold.
3When the new call is answered, to join the first
participant in the conference call, select Options >
Conference.
To add a new person to the call, repeat step 2, and
select Options > Conference > Add to conference.
The phone supports conference calls between a
maximum of six participants, including yourself.
To have a private conversation with one of the
participants, select Options > Conference > Private.
Select a participant, and press Private. The conference
call is put on hold on your phone. The other
participants can still continue the conference call.
After you have finished the private conversation,
select Options > Add to conference to return to the
conference call.
To drop a participant, select Options > Conference >
Drop participant, scroll to the participant, and select
Drop.
4To end the active conference call, press the end key.
Answer or reject a call
To answer the call, press the call key.
To mute the ringing tone when a call comes in, select
Silence.
Tip! If a compatible headset is connected to the
phone, to answer and end a call, press the headset
key.
If you do not want to answer a call, press the end key to
reject it. The caller hears a line busy tone. If you have
activated the Call divert settings > If busy function to
divert calls, rejecting an incoming call also diverts the call.
See ‘Call diverting’, p. 97.
When you reject an incoming call, you can also send a text
message to the caller informing why you cannot answer
the call. Select Options > Send text message. You can
edit the text before sending it. See also Reject call with
SMS, p. 90.
Call waiting
You can answer a call while you have another call in
progress if you have activated Call waiting (network
service) in Tools > Settings > Call > Call waiting.
Tip! To change the phone tones for different
environments and events, see ‘Set tones’, p. 17.
To answer the waiting call, press the call key. The first call
is put on hold.
To switch between the two calls, select Swap. Select
Options > Transfer to connect an incoming call, or a call
on hold, with an active call, and to disconnect yourself
Make calls
23
from the calls. To end the active call, press the end key. To
end both calls, select Options > End all calls.
Options
Many of the options that you can use during a call are
network services. Select Options during a call for some of
the following options: Mute or Unmute, Answer, Reject,
Swap, Hold or Unhold, Activate handset, Activate loudsp.,
or Activate handsfree (if a compatible headset with
Bluetooth connectivity is attached), End active call or End
all calls, New call, Conference, and Transfer. Select from
the following:
Replace—To end an active call and replace it by answering
the waiting call.
Send DTMF—To send DTMF tone strings; for example, a
password. Enter the DTMF string or search for it in
Contacts. To enter a wait character (w) or a pause
character (p), press * repeatedly. Select OK to send the
tone.
Tip! You can add DTMF tones to the Phone number
or DTMF fields in a contact card.
Log
Recent calls
To monitor the phone numbers of missed, received, and
dialled calls, press the menu key, and select Connect. >
Log > Recent calls. The phone registers missed and
received calls only if the network supports these functions,
the phone is switched on, and within the network’s service
area.
Tip! When you see a note in the standby mode about
missed calls, select Show to access the list of missed
calls. To call back, scroll to a name or number, and
press the call key.
To clear all recent call lists, select Options > Clear recent
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select
Options > Clear list. To clear an individual event, open a
register, scroll to the event, and press the clear key.
Call duration
To monitor the approximate duration of your incoming
and outgoing calls, press the menu key, and select
Connect. > Log > Call duration.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
Make calls
24
To clear call duration timers, select Options > Clear
timers. To do this, you need the lock code. See ‘Security’,
and ‘Phone and SIM’, p. 94.
Packet data
To check the amount of data sent and received during
packet data connections, press the menu key, and select
Connect. > Log > Packet data. For example, you may be
charged for your packet data connections by the amount
of data sent and received.
Monitor all communication events
Icons in Log are as follows:
Incoming
Outgoing
Missed communication events
To monitor all calls, text
messages, or data connections
registered by the phone, press
the menu key, select
Connect. > Log, and scroll
right to open the general log.
For each communication
event, you can see the sender
or recipient name, phone
number, name of the service
provider, or access point. You can filter the general log to
view just one type of event and create new contact cards
based on the log information.
Tip! To view a list of sent messages, press the menu
key, and select Messaging > Sent.
Subevents, such as a text message sent in more than one
part and packet data connections, are logged as one
communication event. Connections to your mailbox,
multimedia messaging centre, or Web pages are shown as
packet data connections.
Note: When sending messages, your phone may
display Sent. This is an indication that the message
has been sent by your phone to the message center
number programmed into your phone. This is not
an indication that the message has been received
at the intended destination. For more details about
messaging services, check with your service
provider.
To filter the log, select Options > Filter and a filter.
To erase the contents of the log, recent calls register, and
messaging delivery reports permanently, select Options >
Clear log. Select Yes to confirm.
To set the Log duration, select Options > Settings > Log
duration. The log events remain in the phone memory for
a set number of days after which they are automatically
erased to free memory. If you select No log, all the log
Make calls
25
contents, recent calls register, and messaging delivery
reports are permanently deleted.
To view how much data (measured in kilobytes) has been
transferred and how long a certain packet data connection
has lasted, scroll to an incoming or outgoing event
indicated by Pack., and select Options > View details.
Make calls
26
Contacts (phonebook)
27
Contacts (phonebook)
Press the menu key, and select Contacts. In Contacts, you
can add a personal ringing tone, voice tag, or a thumbnail
image to a contact card. You can also create contact
groups, which allow you to send text messages or e-mail
to many recipients at the same time. You can add received
contact information (business cards) to contacts. See ‘Data
and settings’, p. 50. Contact information can only be sent
to or received from compatible devices.
Options in Contacts are Open, Call, Create
message, New contact, Open conversation, Edit,
Delete, Duplicate, Add to group, Belongs to
groups, Mark/Unmark, Copy, SIM contacts, Go to
web address, Send, Contacts info, Settings, Help,
and Exit.
Save names and numbers
1Select Options > New contact.
2Fill in the fields that you want, and press Done.
Options when editing a contact card are Add
thumbnail, Remove thumbnail, Add detail,
Delete detail, Edit label, Help, and Exit.
To edit contact cards in Contacts, scroll to the contact
card you want to edit, and select Options > Edit.
To delete a contact card in Contacts, select a card, and
press the clear key. To delete several contact cards at
the same time, press the scroll key and the edit key to
mark the contacts, and press the clear key to delete.
Tip! To add and edit contact cards, use Nokia
Contacts Editor available in Nokia PC Suite. See
the CD-ROM supplied with your phone.
To attach a small thumbnail image to a contact card,
open the contact card, and select Options > Edit >
Options > Add thumbnail. The thumbnail image is
shown when the contact calls.
Default numbers and addresses
You can assign default numbers or addresses to a contact
card. If a contact has several numbers or addresses, you
can easily call or send a message to the contact using a
specific number or address.
1Press the menu key, select Contacts, and a contact.
2Select Options > Defaults.
3Select a default to which you want to add a number or
an address and Assign.
4Select a number or an address you want to set as a
default.
Contacts (phonebook)
28
The default number or address is underlined in the contact
card.
Copy contacts
Tip! To send contact information, select the card
you want to send. Select Options > Send > Via text
message, Via multimedia, or Via Bluetooth. See
‘Messaging’, p. 43 and ‘Send data’, p. 83.
•To copy names and numbers from a SIM card to
your phone, press the menu key, and select Contacts >
Options > SIM contacts > SIM directory. Select the
names you want to copy and Options > Copy to
Contacts.
• To copy a telephone, fax, or pager number from
contacts to your SIM card, select Contacts, and open a
contact card. Scroll to the number, and select
Options > Copy > To SIM directory.
Tip! You can synchronise your contacts to a
compatible PC with Nokia PC Suite. See the
CD-ROM supplied with your phone.
SIM directory and other services
Note: For availability, rates, and information on
using SIM services, contact your SIM card vendor
(network operator, service provider or other vendor).
Press the menu key, and select Contacts > Options > SIM
contacts > SIM directory to see the names and numbers
stored on the SIM card. In the SIM directory you can add,
edit, or copy numbers to contacts, and you can make calls.
Ringing tones for contacts
When a contact or group member calls you, the phone
plays the chosen ringing tone, if the caller’s telephone
number is sent with the call and your phone recognizes it.
Tip! Speed dialing is a quick way to call frequently
used numbers. You can assign speed dialing keys to
eight phone numbers. See "1-touch dialing,", p.21.
1Select and open a contact card, or select a contact
group from the groups list.
2Select Options > Ringing tone to view a list of ringing
tones.
3Select the ringing tone you wish to use for the
individual contact or the selected group.
To remove the ringing tone, select Default tone from the
list of ringing tones.
Contacts (phonebook)
29
Voice dialing
You can make a phone call by saying a voice tag that has
been added to a contact card. Any spoken words can be a
voice tag.
Before using voice tags, note the following:
• Voice tags are not language-dependent. They are
dependent on the speaker's voice.
• You must say the name exactly as you said it when you
recorded it.
• Voice tags are sensitive to background noise. Record
voice tags and use them in a quiet environment.
• Very short names are not accepted. Use long names and
avoid similar names for different numbers.
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you
should not rely solely upon voice dialing in all
circumstances.
Add a voice tag
Example: You can use a person’s name as a voice
tag, such as “John’s mobile.”
You can have only one voice tag per contact card. You can
add a voice tag to up to 50 phone numbers.
1In Contacts, open the contact card to which you want
to add a voice tag.
2Scroll to the number to which you want to add the
voice tag, and select Options > Add voice tag.
Tip! To view a list of voice tags you have defined,
select Contacts > Options > Contacts info >
Voice tags.
3Select Start to record a voice tag. After the starting
tone, say clearly the words you want to record as a
voice tag. Wait until the phone plays the recorded tag
and saves it. is displayed next to the number in the
contact card, indicating that a voice tag has been
added to it.
Voice tag call
You must say the voice tag exactly as you said it when you
recorded it. When you are making a call by saying a voice
tag, the loudspeaker is in use. Hold the phone at a short
distance away, and say the voice tag clearly.
Press and hold the voice key. A short tone is played, and
Speak now is displayed. The phone plays the original voice
tag, displays the name and number, and dials the number
of the recognized voice tag.
Tip! To listen to, change, or delete a voice tag,
open a contact card and scroll to the number
with the voice tag (indicated by ). Select
Options > Voice tags > Playback, Change, or
Delete.
Contacts (phonebook)
30
Create contact groups
1In Contacts, scroll right to open the groups list.
2Select Options > New group.
3Write a name for the group or select the default name
Group %N and OK.
4Open the group, and select Options > Add members.
5Scroll to a contact, and press the scroll key to mark it.
To add multiple members at a time, mark all of the
contacts you want to add.
6Select OK to add the contacts to the group.
To rename a group, select Options > Rename, enter the
new name, and select OK.
Options in the groups list view are Open, New
group, Delete, Rename, Ringing tone, Contacts info,
Settings, Help, and Exit.
Remove members from a group
1In the groups list, open the group you want to modify.
2Scroll to the contact, and select Options > Remove
from group.
3Select Yes to remove the contact from the group.
Tip! To check to which groups a contact belongs,
scroll to the contact, and select Options >
Belongs to groups.
Camera and Gallery
31
Camera and Gallery
Camera
Respect the personal rights of others and obey the local
laws, regulations, and customs when taking and using
images or video clips.
With the Camera application you can take pictures and
record videos while on the move. The images and video are
automatically saved in the Gallery application. The camera
produces JPEG images, and video clips are recorded in the
3GPP file format with the .3gp file extension. You can also
send images or a video in a multimedia message, as an
e-mail attachment, or using a Bluetooth connection.
Open the camera slide on the back of the phone to open
the camera, or select Camera.
The Camera application starts when the camera slide is
opened, and you can see the view to be captured. Scroll left
or right to move between Image and Video views.
Tip! You can insert an image into a contact card.
See "Save names and numbers," p. 27.
The Nokia 6682 device supports an image capture
resolution of up to 1280 x 960 pixels. The image resolution
in these materials may appear different.
Take pictures
Scroll left or right to move between Image and Video
views. Open the Image view.
Options before taking a picture are Capture, New,
Flash, Activate night mode/Deact. night mode,
Sequence mode/Normal mode, Self-timer, Go to
Gallery, Adjust, Settings, Help, and Exit.
Camera indicators show the following:
• The phone memory ( ) and memory card ( )
indicators (1) show where images are saved.
• The images indicator (2) estimates how many images,
depending on the selected image quality, can fit in the
remaining memory of your phone or the memory card.
Camera and Gallery
32
• The zoom indicator (3)
shows the zoom level.
Scroll up to zoom in, and
scroll down to zoom out.
• The flash indicator (4)
shows if the flash is On
(), Off (), or
Automatic (no icon).
• The night mode indicator
(5) shows that the night
mode is active.
• The sequence mode
indicator (6) shows that sequence mode is active. See
"Take pictures in a sequence," page 33.
• The self-timer indicator (7) shows how much time is
left before a picture is taken. See "You in the picture—
self-timer," page 33.
Shortcuts are as follows:
•Press 1 to activate or deactivate night mode.
•Press 4 to activate or deactivate sequence mode.
•Press 3 to adjust brightness.
•Press 6 to adjust contrast.
To take a picture, press the middle of the Scroll key. Do
not move the phone before the image is saved. The image
is saved automatically in the Images folder of Gallery. See
"Gallery," page 36.
Saving the captured image may take longer if you have
changed the zoom, lighting, or color settings.
While taking a picture, follow these tips:
• Use both hands to keep the camera still.
• To take images or record video in a dark environment,
use the night mode. If you are using the night mode,
the exposure time is longer and the camera needs to be
kept still longer.
• To make lighting and color adjustments before taking a
picture, select Options > Adjust > Brightness, Contrast,
White balance , or Color tone. See "Adjust color and
lighting," page 33.
• The quality of a zoomed picture is lower than that of a
nonzoomed picture, but the image remains the same
size. You may notice the difference in image quality if
viewed on a PC.
•Camera goes into battery saving mode if there are no
key presses within a minute. To continue taking
pictures, press the middle of the Scroll key.
After the image has been taken, follow these tips:
• If you do not want to keep the image, press Clear.
• To return to the viewfinder to take a new picture, press
the middle of the Scroll key.
• To send the image using via Bluetooth, via e-mail, or Via
multimedia, press Call. For more information see
"Messaging,", p. 43 and "Bluetooth connection,", p. 82.
Camera and Gallery
33
• To set the picture as wallpaper in the standby mode,
select Options > Set as wallpaper.
Take pictures in a sequence
Select Options > Sequence
mode to set the camera to
take six pictures in a
sequence. After the pictures
are taken, they are
automatically saved in
Gallery, and are shown in a
grid.
You in the picture—self-timer
Use the self-timer to delay taking a picture so that you can
include yourself in the picture. To set the self-timer delay,
select Options > Self-timer > 10 seconds, 20 seconds, or
30 seconds. Select Activate. The self-timer indicator ( )
blinks and the phone beeps when the timer is running. The
camera takes the picture after the selected delay has
elapsed.
The flash
The camera has an LED flash for low light conditions. The
following flash modes are available: On, Off, and
Automatic.
Select Options > Flash > On to use the flash.
If the flash is set to Off or Automatic during bright
conditions, the flash still emits a low light when an image
is captured. This allows the subject of the picture to see
when the picture is taken. There is no flash effect on the
resultant picture.
Adjust color and lighting
To enable the camera to reproduce colors and lighting
more accurately, or to add effects to your pictures or
videos, select Options > Adjust, and select from the
following:
Brightness—Scroll left and right to select the appropriate
brightness setting.
Contrast—Scroll left and right to select the appropriate
contrast setting.
White balance—Select the current lighting condition from
the list. This allows the camera to reproduce colors more
accurately.
Color tone—Select a color effect from the list.
Camera and Gallery
34
The screen display changes to match any settings made,
showing you how the final pictures or videos will look.
Adjust camera settings
1Select Options > Settings > Image.
2Scroll to the setting you want to change:
Show captured image—Select Yes if you want to see
the captured image after it has been taken or No if you
want to continue taking pictures immediately.
Image quality—High, Normal, and Basic. The better the
image quality, the more memory the image consumes.
The quality of a zoomed picture is lower than that of a
nonzoomed picture, but the image remains the same
size. You may notice the difference in image quality if
viewed on a PC, for example. If you are going to print
the image, select High or Normal image quality.
Image resolution—Select the resolution you want to
use for the images you are going to take.
Resolution is a measure of sharpness and clarity of an
image. Resolution refers to the number of pixels in an
image. The more pixels, the more detailed the picture
is, and the more memory it consumes.
Default image name—Set a default name for the
images you are going to take. You can replace the date
with your own text (for example, ‘Holiday_2004’).
Memory in use—Select where to store your images.
Record videos
Scroll left or right to move between Image and Video views.
Open the Video view.
Options before recording a video are Record, New,
Activate night mode/Deact. night mode, Mute/
Unmute, Go to Gallery, Adjust, Settings, Help, and
Exit.
Video recorder indicators
show the following:
• The phone memory ( )
and memory card ( )
indicators (1) show where
the video is saved.
• The current video length
indicator (2) shows
elapsed time and time
remaining.
• The zoom indicator (3)
shows the zoom level. Scroll up to zoom in on your
subject before or during recording. Scroll down to zoom
out.
• The microphone indicator (4) shows that the
microphone is muted.
• The night mode indicator (5) shows that the night
mode is active.
Shortcuts are as follows:
Camera and Gallery
35
• Press 1 to activate or deactivate the night mode.
• Press 3 to adjust brightness.
• Press 6 to adjust contrast.
To make lighting and color adjustments before taking a
picture, select Options > Adjust > Brightness, Contrast,
White balance, or Color tone. See "Adjust color and
lighting," page 33.
Press the middle of the Scroll key to start recording. The
record icon is shown. If you use the camera to record a
video clip, the LED flash is constantly on in low power mode
indicating that a video clip is being recorded.
To pause recording at any time, press the middle of the
Scroll key. The pause icon starts to blink on the display.
Press the Scroll key again to resume recording.
Video recording automatically stops if recording is set to
pause and there are no key presses within a minute.
Select Stop to stop recording. The video clip is
automatically saved to the Video clips folder of Gallery.
See "Gallery," page 36.
After a video clip has been recorded:
• To immediately play the video clip you just recorded,
select Options > Play.
• If you do not want to keep the video, press Clear.
• To return to the viewfinder to record a new video, press
the middle of the Scroll key.
• To send the video via Bluetooth, via e-mail, or Via
multimedia, press Call. For more information, see the
"Messaging," chapter, p. 43 and "Bluetooth
connection,", p. 82.
Adjust video recorder settings
Select Options > Settings > Video and the setting you
want to change:
Length—If you select Maximum, the length of the video
recording is restricted by the available space on your
memory card, and up to one hour per clip. You cannot send
a video clip recorded like this by MMS, due to the
recording properties. Select Short to record video clips up
to 300 kB (approximately 30 seconds in duration) so that
they can be conveniently sent as a multimedia message to
a compatible device. Some networks, however, may only
support sending multimedia messages with a maximum
size of 100 kB.
Video resolution—Select 128x196 or 176x144.
Default video name—Define a default name, or select the
date.
Memory in use—Define the default memory store, phone
memory, or memory card.
Camera and Gallery
36
Gallery
To store and organize your images, sound clips, playlists,
video clips, streaming links, and .ram files, press Menu,
and select Gallery.
Select Images , Video clips , Tracks , Sound clips
, Links , or All files , and press the middle of
the Scroll key to open it.
You can browse, open, and create folders; and mark, copy,
and move items to folders. Sound clips, video clips, .ram
files, and streaming links are opened and played in the
RealPlayer application. See "RealPlayer™,", p. 40.
Tip! You can transfer images from your phone to a
compatible PC with Nokia Phone Browser available
in Nokia PC Suite. See the CD-ROM supplied with
your phone.
Tip! You can transfer music files from your phone
to your memory card with Nokia Audio Manager
available in Nokia PC Suite. See the CD-ROM
supplied with your phone.
Tip! You can also transfer files from your phone to
your memory card using an MMC card reader.
Press the middle of the Scroll key to open a file or a folder.
Images open in the image viewer. See "View images,", p.
36.
To copy or move files to the memory card or to phone
memory, select a file and Options > Organise > Copy to
memory card/Move to memory card or Copy to phone
mem./Move to phone mem.. Files stored on the memory
card are indicated with .
To download files into Gallery in one of the main folders
using the browser, select Graphic downls., Video
downlds., Track downlds., or Sound downlds.. The browser
opens, and you can select a bookmark from which site to
download.
To search for a file, select Options > Find. Start to enter a
search string (for example, the name or date of the file you
are searching). Files that match your search are shown.
View images
Pictures taken with Camera are stored in Gallery. Images
can also be sent to you in a multimedia message, as an
e-mail attachment, or through a Bluetooth connection. To
view a received image in the gallery, you must save it in the
phone memory or on a memory card.
Open the Images folder in Gallery to start the image
viewer, select an image, and press the middle of the Scroll
key to view it.
Camera and Gallery
37
Options when viewing an image are Send, Set as
wallpaper, Rotate, Zoom in/Zoom out, Full screen,
Delete, Rename, View details, Add to ’Go to’, Help,
and Exit.
To zoom an image, select Options > Zoom in or Zoom out.
You can see the zooming ratio at the top of the display. The
zooming ratio is not stored permanently.
To see more of the image, select Options > Full screen. The
panes around the image are removed. To move the focus
when you are zooming an image or viewing an image in
full screen mode, use the Scroll key.
To rotate the image, select Options > Rotate. Press and
hold 0 to return to the normal view.
Imaging
38
Imaging
Video editor
To create custom video clips, press Menu, and select
Imaging > Vid. editor. To create custom video clips,
combine and trim video clips, and add sound clips,
transitions, and effects. Transitions are visual effects that
you can add in the beginning and end of the video or
between the video clips.
Edit video, sound, and transitions
1Mark and select one or more video clips.
2Select Options > Edit. In the edit video view, you can
insert video clips to make a custom video clip, and edit
the clips by trimming and adding effects. You can add
sound clips and change their duration.
Tip! To take a snapshot of a video clip, select
Options > Take snapshot in the play view, edit
preview view, or in the cut view.
To modify the video, select one of the following
options:
Preview—Previews the custom video clip.
Insert—
•Video clip—Inserts the selected video clip. A
thumbnail of the video clip is shown in the main
view. A thumbnail consists of the first non-black
view of the video clip. The name and length of the
selected video clip is also shown.
•Sound clip—Inserts the selected sound clip. The name
and length of the selected sound clip is shown in the
main view.
•New sound clip—Records a new sound clip to the
selected location.
Cut—Trims the video clip or a sound clip in the cut video
clip or in the cut sound clip view.
Edit video clip—
•Move—Moves the video clip to the selected location.
•Add colour effect—Inserts a color effect on the video
clip.
•Use slow motion—Slows the speed of the video clip.
•Mute sound/Unmute sound — Mutes or unmutes the
original video clip sound.
•Remove—Removes the video clip from the video.
Edit sound clip—
•Move—Moves the sound clip to the selected location.
•Set duration—Edits the sound clip length.
•Remove—Removes the sound clip from the video.
Imaging
39
•Duplicate—Makes a copy of the selected video clip or
sound clip.
Edit transition—There are three types of transitions: at
the start of a video, at the end of a video, and
transitions between video clips. A start transition can
be selected when the first transition of the video is
active.
3Select Save to save the video. Define the Memory in use
in the Settings. The default is the phone memory.
Tip! In the settings view you can define the
Default video name, Default sc. shot name, and
Memory in use.
Select Send > Via multimedia, Via Bluetooth, or Via e-mail
if you want to send the video. Contact your service
provider for details of the maximum multimedia message
size that you can send. If the video is too large to be sent
in a multimedia message, appears.
Tip! If you want to send a video clip that is over the
maximum multimedia message size allowed by your
service provider, you can send the clip using a
Bluetooth connection. See ‘Send data’, p. 83. You can
also transfer the videos using a Bluetooth
connection into a Bluetooth-enabled personal
computer, or by using a memory card reader
(internal/external).
Image manager
To browse the images visually, press Menu, and select
Imaging > Image mgr.
1Scroll right to select
Phone mem. or Memory
card memory. Image mgr.
also shows how many
folders or images are in
the selected folder.
2Open a folder to browse
the images visually. Scroll
left and right to move
between images and
folders. Press Scroll to
view an image.
Press Edit and Scroll simultaneously to mark images
for an image show. A check mark is shown next to a
selected image. Select Options > Image show. Scroll up
and down to view the next or previous image in the
show.
Imaging
40
Image print
Use Image print to print the images using USB
(PictBridge-compliant), a Bluetooth connection, or the
MMC. You can select from a list of available printers
displayed in the printer selection view.
Note: To print to a PictBridge-compliant printer,
select Image print before you connect the USB cable.
Press Menu, and select Imaging > Image print. Select the
images you want to print.
Options in the image selection view are Print, Edit
list, Open (displayed when you select an album), Help,
and Exit.
Printer selection
Once you have selected images you want to print, a list of
available printing devices is displayed. If you have
connected a PictBridge-compliant USB printer using the
DKU-2 cable supplied with the phone, the printer is
automatically displayed.
Select the device you want to use. The print preview
screen is displayed.
Print preview
After you select a printing device, the images that you
selected are displayed using predefined layouts. To change
the layout, scroll left and right through the available
layouts for the selected printer. If you selected more
images than will fit on a single page, scroll up or down to
display the additional pages.
Options in print preview are Print, Settings, Help,
and Exit.
Print settings
The available settings options vary depending on the
capabilities of the printing device you selected.
To select the paper size, select Paper size, select the size of
paper from the list, and select OK. Select Cancel to return
to the previous view.
RealPlayer™
Press Menu, and select Imaging > RealPlayer. With
RealPlayer, you can play video clips, sound clips, and
playlists, or stream media files over the air. A streaming
link can be activated when you are browsing Web pages,
or it can be stored in the phone memory or memory card.
Imaging
41
RealPlayer supports files with extensions such as .aac,
.awb, .m4a, .mid, .mp3, and .wav. However, RealPlayer does
not necessarily support all file formats or all the variations
of file formats. For example, RealPlayer will attempt to
open all .mp4 files, but some .mp4 files may include
content that is not compliant with 3GPP standards and,
therefore, is not supported by this phone.
Options in RealPlayer when a clip is selected are
Play, Play in full screen/Continue, Continue in
full scr.; Stop, Mute/Unmute, Clip details, Send,
Settings, Help, and Exit.
Play video or sound clips
1To play a media file stored in phone memory, or on the
memory card, select Options > Open and select:
Most recent clips—To play one of the last six files played
in RealPlayer.
Saved clip—To play a file saved in Gallery. See ‘Gallery’,
p. 36.
2Scroll to a file, and press Scroll to play the file.
Tip! To view a video clip in full screen mode, press 2.
Press it again to change back to normal screen mode.
Icons in RealPlayer:
Repeat
Random
Repeat and random
Loudspeaker muted
Shortcuts during play:
To fast forward, scroll up.
To rewind through the media file, scroll down.
To mute the sound, scroll left until the indicator is
displayed. To turn on the sound, scroll right until the
indicator is displayed.
Stream content over the air
Many service providers require you to use an Internet
access point (IAP) for your default access point. Other
service providers allow you to use a WAP access point.
The access points may be configured when you first start
your phone.
Contact your service provider for more information.
Note: In RealPlayer, you can only open an rtsp:/
/ URL address. However, RealPlayer will
recognize an http link to a .ram file.
To stream content over the air, select a streaming link
saved in Gallery, on a Web page, or received in a text
message or multimedia message. Before live content
begins streaming, your phone connects to the site and
start loading the content.
Imaging
42
Receive RealPlayer settings
You may receive RealPlayer settings in a special text
message from the network operator or service provider.
See ‘Data and settings’, p. 50. For more information,
contact your network operator or service provider.
Change the RealPlayer settings
Select Options > Settings and choose from the following:
Video—To have RealPlayer automatically repeat video clips
after they finish playing.
Audio settings—To select if you want to repeat playing of
track lists and play sound clips on a track list in random
order.
Connection settings—To select whether to use a proxy
server, change the default access point, and set the time-
outs and port range used when connecting. Contact your
service provider for the correct settings.
Proxy settings:
•Use proxy—To use a proxy server, select Yes.
•Proxy serv. address—Enter the IP address of the
proxy server.
•Proxy port number—Enter the port number of the
proxy server.
Proxy servers are intermediate servers between media
servers and their users. Some service providers use them
to provide additional security or speed up access to
browser pages that contain sound or video clips.
Network settings:
•Default access point—Scroll to the access point you
want to use to connect to the Internet, and press Scroll.
•Online time—Set the time for RealPlayer to disconnect
from the network when you have paused a media clip
playing through a network link, select User defined, and
press Scroll. Enter the time, and select OK.
•Connection time-out—Scroll left or right to set the
maximum time to elapse between selecting a network
link and connecting to the media server, and select OK.
•Server time-out—Scroll left or right to set the
maximum time to wait for a response from the media
server before disconnecting, and select OK.
•Lowest UDP port—Enter the lowest port number of the
servers port range. The minimum value is 6970.
•Highest UDP port—Enter the highest port number of the
servers port range. The maximum value is 32000.
Select Options > Advanced settings to edit the
bandwidth values for different networks.
Messaging
43
Messaging
Press the menu key, and select Messaging. In Messaging,
you can create, send, receive, view, edit, and organize text
messages, multimedia messages, e-mail messages, and
special text messages containing data. You can also
receive messages and data through a Bluetooth
connection, receive Web service messages, receive cell
broadcast messages, and send service commands.
Options in the Messaging main view are Open,
Create message, Connect (if you have defined
mailbox settings but a connection to the mailbox
is not active)/Disconnect (if a connection to the
mailbox is active), SIM messages, Cell broadcast,
Service command, Settings, Help, and Exit.
Note: These functions can be used only if they are
supported by your network operator or service
provider. Only devices that offer compatible
multimedia message, or e-mail features can
receive and display these messages. Some networks
might provide the recipient device with a Web page
link to view multimedia messages.
When you open Messaging, you can see the New message
function and a list of folders:
Inbox—Contains received messages except e-mail
and cell broadcast messages. E-mail messages are stored
in the Mailbox.
My folders—For organizing your messages into
folders. Organize your messages by adding new folders
under My folders.
Mailbox—In Mailbox, you can connect to your
remote mailbox to retrieve your new e-mail messages or
view your previously retrieved e-mail messages offline.
See "E-mail," page 56.
Drafts—Contains draft messages that have not been
sent.
Sent—Contains the last 15 messages that have been
sent, excluding messages sent using a Bluetooth
connection. To change the number of messages to be
saved, see "Other settings," page 58.
Outbox—A temporary storage place for messages
waiting to be sent.
Reports—Contains delivery reports that you request
from the network of the text messages and multimedia
messages you have sent (network service). Receiving a
Messaging
44
delivery report of a multimedia message that has been
sent to an e-mail address might not be possible.
Tip! When you have opened any of the default
folders, to view the folders, scroll left or right.
To enter and send service requests, such as activation
commands for network services, to your service provider,
press the menu key, and select Messaging > Mailbox >
Mailbox > Options > Service command.
Cell broadcast is a network service that allows you to
receive messages on various topics, such as weather or
traffic conditions from your service provider. For available
topics and relevant topic numbers, contact your service
provider. In the main view of Messaging, select Options >
Cell broadcast. In the main view, you can see the status
of a topic, a topic number, name, and follow-up flag ( ),
if applicable.
Options in Cell broadcast are Open, Subscribe/
Unsubscribe, Hotmark/Remove hotmark, Topic,
Settings, Help, and Exit.
A packet data connection may prevent cell broadcast
reception.
Writing text
Traditional text input
ABC and abc indicate the selected case. Abc means that
the first letter of the word is written in upper case, and all
other letters are automatically written in lower case. 123
indicates number mode.
The indicator Abc is shown on the top right of the display
when you are writing text using traditional text input.
• Press a number key (1–9) repeatedly until the desired
character appears. There are more characters available
for a number key than are printed on the key.
• To insert a number, press and hold the number key.
• To switch between letter and number mode, press and
hold #.
• If the next letter is located on the same key as the
present one, wait until the cursor appears (or scroll
right to end the time-out period), and enter the letter.
• To erase a character, press the clear key. Press and hold
the clear key to clear more than one character.
• The most common punctuation marks are available
under 1. Press 1 repeatedly to reach the desired
punctuation mark.
Press * to open a list of special characters. Scroll
through the list, and select a character.
Messaging
45
• To insert a space, press 0. To move the cursor to the
next line, press 0 three times.
• To switch between the different character cases Abc,
abc, and ABC, press #.
Predictive text input—dictionary
You can enter any letter with a single key press. Predictive
text input is based on a built-in dictionary to which you
can also add new words. When the dictionary becomes full,
the latest added word replaces the oldest.
1To activate predictive text
input, press the edit key,
and select Dictionary on.
This activates predictive
text input for all editors in
the phone. is
shown on the top right of
the display when you
write text using predictive
text input.
2To write the desired word, press the keys 2–9. Press
each key only once for one letter. For example, to write
‘Nokia’ when the English dictionary is selected, press 6
for N, 6 for o, 5 for k, 4 for i, and 2 for a.
The word suggestion changes after each key press.
3When you finish writing the word and it is correct, to
confirm it, scroll right or press 0 to add a space.
If the word is not correct, press * repeatedly to view the
matching words the dictionary has found one by one,
or press the edit key, and select Dictionary >
Matches.
If the ? character is shown after the word, the word
you intended to write is not in the dictionary. To add a
word to the dictionary, select Spell, enter the word (up
to 32 letters) using traditional text input, and select
OK. The word is added to the dictionary. When the
dictionary becomes full, a new word replaces the
oldest added word.
4Start writing the next word.
To set predictive text input on or off, press # twice quickly.
Tips on using predictive text input
To erase a character, press the clear key. Press and hold the
clear key to clear more than one character.
• To change between the different character cases Abc,
abc, and ABC, press #. If you press # quickly twice,
predictive text input is turned off.
Tip! Predictive text input tries to guess which
commonly used punctuation mark (.,?!‘) is needed.
The order and availability of the punctuation marks
depend on the language of the dictionary.
To insert a number in letter mode, press and hold the
desired number key.
Messaging
46
• To switch between letter and number mode, press and
hold #.
The most common punctuation marks are available
under 1. Press 1 and then * repeatedly to search for the
desired punctuation mark.
Press and hold * to open a list of special characters.
Press * repeatedly to view the matching words the
dictionary has found one by one.
Press the edit key, select Dictionary, and scroll right to
select one of the following options:
Matches—To view a list of words that correspond to your
key presses.
Insert word—To add a word (up to 32 letters) to the
dictionary by using traditional text input. When the
dictionary becomes full, a new word replaces the oldest
added word.
Edit word—To edit the word using traditional text input.
This is available if the word is active (underlined).
Tip! When you press the edit key, the following
options appear (depending on the editing mode):
Predictive text (predictive text input), Alpha mode
(traditional text input), Number mode, Cut (if text
has been selected), Copy (if text has been selected),
Paste (when text has been cut or copied first),
Insert number, Insert symbol, and Writing language:
(changes the input language for all editors in the phone).
Write compound words
Write the first half of a compound word; to confirm it,
scroll right. Write the last part of the compound word. To
complete the compound word, press 0 to add a space.
Turn predictive text input off
Press the edit key, and select Predictive text > Off to turn
predictive text input off for all editors in the phone.
Copy text to clipboard
1To select letters and words, press and hold the edit key
and scroll left or right. As the selection moves, text is
highlighted.
2To copy the text to the clipboard, while still holding the
edit key, select Copy.
3To insert the text into a document, press and hold the
edit key, and select Paste, or press the edit key once,
and select Paste.
To select lines of text, press and hold the edit key and
scroll up or down.
To remove the selected text from the document, press
the clear key.
Messaging
47
Write and send messages
The appearance of a multimedia message may vary,
depending on the receiving device.
Copyright protections may prevent some images, ringing
tones, and other content from being copied, modified,
transferred, or forwarded.
Tip! You can start to create a message from any
application that has the option Send. Select a file
(image or text) to be added to the message, and
select Options > Send.
Before you can create a multimedia message or write an e-
mail, you must have the correct connection settings in
place. See "Receive MMS and e-mail settings," page 49
and "E-mail," page 56.
Options in the message editor are Send, Add
recipient, Insert, Attachments (e-mail), Preview
(MMS), Objects (MMS), Remove (MMS), Delete,
Check contacts, Message details, Sending
options, Help, and Exit.
1Select New message to view a list of message options:
Text message—to send a text message.
Multimedia message—to send a multimedia message
(MMS).
E-mail—to send an e-mail. If you have not set up your
e-mail account, you are prompted to do so.
Postcard—to send a postcard.
Tip! Scroll to a contact, and press the scroll key
to mark it. You can mark several recipients at a
time.
Press the scroll key to select recipients or groups from
contacts, or enter the recipient’s phone number or e-
mail address. Press * to add a semicolon (;) that
separates the recipients. You can also copy and paste
the number or address from the clipboard.
2Scroll down to move to the message field.
3Write the message.
4To add a media object to
a multimedia message,
select Options > Insert
object > Image, Sound
clip, or Video clip. When
sound is added, is
shown in the navigation
bar.
5Select Insert new >
Sound clip, Recorder to
record a new sound and
Select to save and insert
a copy of the new sound into the message. Select
Options > Preview to view the multimedia message.
6To add an attachment to an e-mail, select Options >
Insert > Image, Sound clip, Video clip or Note. E-mail
attachments are indicated by in the navigation bar.
Messaging
48
7To send the message, select Options > Send, or press
the call key.
Note: Your device supports the sending of text
messages beyond the normal 160-character limit.
If your message exceeds 160 characters, it will be
sent as a series of two or more messages. Your
service provider may charge accordingly.In the
navigation bar, you can see the message length
indicator counting backward from 160. For
example, 10 (2) means that you can still add 10
characters for the text to be sent as two messages.
Some characters may take more space than
others.
Note: E-mail messages are automatically placed
in the Outbox before sending. If sending does not
succeed, the e-mail is left in the Outbox with
Failed status.
Tip! If you are not sure of the capabilities of the
receiving device, or the network does not support
sending large files, use a smaller image size or a
sound clip that is no longer than 15 seconds. To
change the setting, select Messaging > Options >
Settings > Multimedia message > Image size.
Tip! In Messaging you can also create
presentations and send them in a multimedia
message. In the multimedia message editor view,
select Options > Create presentation (shown only if
MMS creation mode is set to Guided or Free). See
"Multimedia messages," page 50.
Postcard
To create and send a postcard, press the menu key, and
select Messaging > Postcard. A postcard must contain the
recipient’s name and address, an image, and text.
Postcards are sent using the Outbox. New, edited,
unfinished, or changed postcards are automatically saved
in the Drafts folder.
Select Options and one of the following:
Send—to send a completed postcard to the recipient.
Add recipient—to add the recipient's name and address.
You can also copy the name of a recipient from Contacts.
Press the menu key, and select Contacts, scroll to and
select the recipient's name.
Insert—select New image to take a photo with the camera
to insert in the postcard or Image to insert a stored image.
Preview—to view a completed postcard. To view the front
and back of the postcard, scroll left or right.
Delete—to delete the postcard.
Postcard details—to view the subject, date and time, type,
and recipient of the postcard.
Messaging
49
Different ways to create and send a postcard:
Press the menu key, and select Messaging > New
message > Postcard or Options > Create message >
Postcard.
After an image has been taken with the Camera
application, select Options > Send > As postcard.
After selecting an image in the Gallery, select Options >
Send > As postcard.
Receive MMS and e-mail settings
You may receive the settings in a text message from your
network operator or service provider. See "Data and
settings," page 50.
For availability of and subscription to data services,
contact your network operator or service provider. Follow
the instructions given by your service provider.
Enter the MMS settings manually:
1Select Tools > Settings > Connection > Access
points, and define the settings for a multimedia
messaging access point. See ‘Connection settings’,
p. 91.
2Select Messaging > Options > Settings >
Multimedia message > Access point in use and the
access point you created to be used as the preferred
connection. See also ‘Multimedia messages’, p. 55.
Tip! To send files other than sounds and notes as
attachments, open the appropriate application, and
select Send > Via e-mail, if available.
Before you can send, receive, retrieve, reply to, and
forward e-mail, you must do the following:
• Configure an Internet access point (IAP). See
‘Connection settings’, p. 91.
• Define your e-mail settings. See "E-mail," page 56. You
need to have a separate e-mail account. Follow the
instructions given by your remote mailbox and Internet
service provider (ISP).
Inbox
Inbox icons:
Unread messages in Inbox
Unread text message
Unread multimedia message
Data received through a Bluetooth connection
When you receive a message, and the text 1 new
message is shown in the standby mode. Select Show to
open the message. To open a message in Inbox, scroll to
the message and select it.
Messaging
50
Multimedia messages
Important: Multimedia message objects may
contain viruses or otherwise be harmful to your
device or PC. Do not open any attachment if you
are not sure of the trustworthiness of the sender.
When you open a multimedia message, you may see an
image and a message, and simultaneously listen to a
sound through the loudspeaker ( is shown if sound is
included). Select the icon to listen to the sound.
Open the message, and select Options > Objects to see
what kind of media objects have been included in the
multimedia message. You can save a multimedia object
file in your phone or send it, for example, through a
Bluetooth connection to another compatible device.
You may also receive multimedia presentations. To view
these presentations, select Options > Play presentation.
Copyright protections may prevent some images, ringing
tones, and other content from being copied, modified,
transferred, or forwarded.
Data and settings
Your phone can receive many kinds of text messages that
contain data ( ), also called over-the-air (OTA)
messages:
Configuration message—You may receive a text message
service number, voice mailbox number, Internet access
point settings, access point login script settings, or e-mail
settings from your network operator, service provider, or
other information management organization in a
configuration message. To save the settings, select
Options > Save all.
Business card—To save the information to Contacts, select
Options > Save business card. Certificates or sound files
attached to the business card are not saved.
Ringing tone—To save the ringing tone, select Options >
Save.
Operator logo—For the logo to be shown in the standby
mode instead of the network operator’s identification,
select Options > Save.
Tip! To change the default access point settings for
multimedia messaging, select Messaging >
Options > Settings > Multimedia message >
Access point in use.
Calendar entry—To save the invitation, select Options >
Save to Calendar.
Web message—To save the bookmark to the bookmarks
list in Web, select Options > Add to bookmarks. If the
message contains both access point settings and
bookmarks, to save the data, select Options > Save all.
Messaging
51
E-mail notification—Tells you how many new e-mails you
have in your remote mailbox. An extended notification
may list more detailed information.
Tip! If you receive a vCard file that has a picture
attached, the picture is saved to Contacts.
Web service messages
Web service messages ( ) are notifications, such as news
headlines, and may contain a text message or a link. For
availability and subscription, contact your service provider.
My folders
In My folders, you can organize your messages into
folders, create new folders, and rename and delete folders.
Tip! You can use texts in the templates folder to
avoid rewriting messages that you send often.
Mailbox
If you select Mailbox and have not set up your e-mail
account, you are prompted to do so. See "E-mail," page 56.
When you create a new mailbox, the name you give to the
mailbox replaces Mailbox in the Messaging main view.
You can have up to six mailboxes.
Open the mailbox
When you open the mailbox,
you can choose whether you
want to view the previously
retrieved e-mail messages
and e-mail headings offline
or connect to the e-mail
server.
When you scroll to your
mailbox and select it, you’ll
receive the prompt, Connect
to mailbox?
Select Yes to connect to your mailbox, and retrieve new e-
mail headings or messages. When you view messages
online, you are continuously connected to a remote
mailbox using a packet data connection. See also
‘Connection settings’, p. 91.
Select No to view previously retrieved e-mail messages
offline. When you view e-mail messages offline, your
phone is not connected to the remote mailbox.
Messaging
52
Retrieve e-mail messages
If you are offline, select Options > Connect to start a
connection to a remote mailbox.
Important: E-mail messages may contain viruses
or otherwise be harmful to your device or PC. Do
not open any attachment if you are not sure of the
trustworthiness of the sender.
1When you have an open connection to a remote
mailbox, select Options > Retrieve e-mail.
New—to retrieve all new e-mail messages to your
phone.
Selected—to retrieve only the e-mail messages that
have been marked.
All—to retrieve all messages from the mailbox.
To stop retrieving messages, select Cancel.
2After you have retrieved the e-mail messages, you can
continue viewing them online, or select Options >
Disconnect to close the connection and view the
e-mail messages offline.
E-mail status icons:
New e-mail (offline or online mode): the content
has not been retrieved to your phone (arrow points
outward).
New e-mail: the content has been retrieved to your
phone (arrow points inward).
The e-mail message has been read.
The e-mail heading that has been read and the
message content has been deleted from the phone.
3To open an e-mail message, scroll to it and select it. If
the e-mail message has not been retrieved (arrow in
the icon is pointing outward) and you are offline, you
are asked if you want to retrieve this message from the
mailbox.
To view e-mail attachments, open a message that has the
attachment indicator , and select Options >
Attachments. If the attachment has a dimmed indicator,
it has not been retrieved to the phone; select Options >
Retrieve. In the Attachments view, you can retrieve, open,
or save attachments. You can also send attachments using
a Bluetooth connection.
Tip! If your mailbox uses the IMAP4 protocol, you
can define how many messages to retrieve, and
whether to retrieve the attachments. With the POP3
protocol, the options are Headers only, Partially (kB),
or Msgs. & attachs..
Delete e-mail messages
To delete the contents of an e-mail message from the
phone while still retaining it in the remote mailbox, select
Options > Delete msg. from: > Phone only.
The phone mirrors the e-mail headings in the remote
mailbox. Although you delete the message content, the e-
Messaging
53
mail heading stays in your phone. If you want to remove
the heading as well, you must first delete the e-mail
message from your remote mailbox, and then make a
connection from your phone to the remote mailbox again
to update the status.
Tip! To copy an e-mail from the remote mailbox to a
folder under My folders, select Options > Copy to
folder, a folder from the list, and OK.
To delete an e-mail from the phone and the remote
mailbox, select Options > Delete msg. from: > Phone
and server.
If you are offline, the e-mail is deleted first from your
phone. During the next connection to the remote mailbox,
it is automatically deleted from the remote mailbox. If you
are using the POP3 protocol, messages marked to be
deleted are removed only after you have closed the
connection to the remote mailbox.
To cancel deleting an e-mail from the phone and server,
scroll to an e-mail that has been marked to be deleted
during the next connection ( ), and select Options >
Undelete.
Disconnect from the mailbox
When you are online, select Options > Disconnect to end
the packet data connection to the remote mailbox.
Tip! You can also leave your mailbox connection
open, and new e-mails (Headers only as default) will
be automatically retrieved from the remote mailbox
to your phone (only if the IMAP IDLE function is
supported by your server). To leave the messaging
application open in the background, press the menu
key twice. Leaving the connection open may
increase your call costs due to the data traffic.
View e-mail messages when offline
When you open Mailbox, you will receive the the Connect
to mailbox? query. If you want to view and read e-mail
messages offline, answer No. You can read the previously
retrieved e-mail headings, the retrieved e-mail messages,
or both. You can also write, reply to, or forward e-mail to
be sent the next time you connect to the mailbox.
Outbox
Outbox is a temporary storage place for messages waiting
to be sent.
Status of the messages in Outbox are as follows:
Sending—A connection is being established and the
message is being sent.
Messaging
54
Waiting/Queued—The message will be sent when
previous messages of a similar type have been sent.
Resend at %U (time)—The phone will try to send the
message again after a time-out period. Select Send to try
sending the message immediately.
Deferred—You can set documents to be held in Outbox.
Scroll to a message that is being sent, and select
Options > Defer sending.
Failed—The maximum number of sending attempts has
been reached. Sending has failed. If you were trying to
send a text message, open the message, and check that
the Sending options are correct.
Messages are placed in the outbox, for example, when
your phone is outside network coverage. You can also
schedule e-mail messages to be sent the next time you
connect to your remote mailbox.
View messages
Before you can view SIM messages, you need to copy
them to a folder in your phone.
1In the Messaging main view, select Options > SIM
messages.
2Select Options > Mark/Unmark > Mark or Mark all
to mark messages.
3Select Options > Copy. A list of folders opens.
4Select a folder and OK to start copying. Open the folder
to view the messages.
Messaging settings
Text messages
Select Messaging > Options > Settings > Text message.
Message centres—Lists all the text message centers that
have been defined.
Msg. centre in use—Select which message center is used
for delivering text messages.
Receive report (network service)—To request the network
to send delivery reports on your messages. When set to No,
only the Sent status is shown in Log. See ‘Log’, p. 23.
Message validity—If the recipient of a message cannot be
reached within the validity period, the message is removed
from the text message center. The network must support
this feature. Maximum time is the maximum amount of
time allowed by the network.
Message sent as—Change this option only if you are sure
that your message center is able to convert text messages
into these other formats. Contact your network operator.
Preferred connection—You can send text messages
through the normal GSM network or through packet data,
Messaging
55
if supported by the network. See ‘Connection settings’,
p. 91.
Reply via same ctr. (network service)—Choose Yes, if you
want the reply message to be sent using the same text
message center number.
Options when editing text message center settings
are Edit, New msg. centre, Delete, Help, and Exit.
Add a new text message center
1Select Message centres > Options > New msg.
centre.
2Write a name for the message center, and select OK.
3Scroll down and then press the middle of the scroll key.
Write the number of the text message center. You
receive the number from your service provider.
4Select OK.
5To use the new settings, go back to the settings view.
Scroll to Msg. centre in use, and select the new
message center.
Multimedia messages
Select Messaging > Options > Settings > Multimedia
message.
Image size—Define the size of the image in a multimedia
message. The options are Original (shown only when the
MMS creation mode is set to Guided or Free), Small, and
Large. Select Original to increase the size of the
multimedia message.
MMS creation mode —If you select Guided, the phone
informs you if you try to send a message that may not be
supported by the recipient. Select Restricted; the phone
prevents you from sending messages that are not
supported.
Access point in use (Must be defined)—Select which
access point is used as the preferred connection for the
multimedia message center.
Recept. in home net.—Select whether you want the
reception of the MMS messages in the home network to
be Automatic, Defer retrieval, or Off. If you select Defer
retrieval, the multimedia messaging center saves the
message. To retrieve the message later, set to Automatic.
Reception if roaming—Select how you want the MMS
messages to be retrieved outside the home network. When
you are outside your home network, sending and receiving
multimedia messages may be billed differently. If
Reception if roaming > Automatic is selected, your phone
automatically makes an active packet data connection to
retrieve the message. Select Reception if roaming > Off if
you do not want to receive multimedia messages when
you are outside your home network.
Allow anon. messages—Select No if you want to reject
messages coming from an anonymous sender.
Messaging
56
Receive adverts—Define whether you want to receive
multimedia message advertisements or not.
Receive report (network service)—Select Yes if you want
the status of the sent message to be shown in the Log.
Note: Receiving a delivery report of a multimedia
message that has been sent to an e-mail address
might not be possible.
Deny report sending—Select Yes if you do not want your
phone to send delivery reports of received multimedia
messages.
Message validity—If the recipient of a message cannot be
reached within the validity period, the message is
removed from the multimedia messaging center. The
network must support this feature. Maximum time is the
maximum amount of time allowed by the network.
Tip! You may also obtain the multimedia and e-mail
settings from your service provider through an OTA
message. Contact your service provider for more
information. See "Data and settings," page 50.
E-mail
Select Messaging > Options > Settings > E-mail, or in
the mailbox main view, select Options > E-mail settings,
and from the following:
Mailbox in use—Select which mailbox you want to use for
sending e-mail.
Mailboxes—Opens a list of mailboxes that have been
defined. If no mailboxes have been defined, you are
prompted to define one. Select a mailbox to change the
settings:
Mailbox settings:
Mailbox name—Enter a descriptive name for the mailbox.
Access point in use (Must be defined)—Choose an
Internet access point (IAP) for the mailbox. See
‘Connection settings’, p. 91.
My e-mail address (Must be defined)—Enter the e-mail
address given to you by your service provider. Replies to
your messages are sent to this address.
Outgoing mail server (Must be defined)—Enter the IP
address or host name of the mail server that sends your
e-mail. You may only be able to use the outgoing server of
your network operator. Contact your service provider for
more information.
Send message—Define how e-mail is sent from your
phone. Select Immediately for the device to connect to the
mailbox when you select Send message. Select When
conn. avail.—E-mail is sent when the connection to the
remote mailbox is available.
Messaging
57
User name—Enter your user name, given to you by your
service provider.
Password:—Enter your password. If you leave this field
blank, you are prompted for the password when you try to
connect to your remote mailbox.
Incoming mail server (Must be defined)—Enter the IP
address or host name of the mail server that receives your
e-mail.
Mailbox type:—Defines the e-mail protocol that your
remote mailbox service provider recommends. The options
are POP3 and IMAP4. This setting can be selected only
once and cannot be changed if you have saved or exited
from the mailbox settings. If you are using the POP3
protocol, e-mail messages are not updated automatically
in online mode. To see the latest e-mail messages, you
must disconnect and make a new connection to your
mailbox.
Security (ports)—Used with the POP3, IMAP4, and SMTP
protocols to secure the connection to the remote mailbox.
APOP secure login (not shown if IMAP4 is selected for
Mailbox type)—Used with the POP3 protocol to encrypt
the sending of passwords to the remote e-mail server while
connecting to the mailbox.
User settings:
E-mails to retrieve (not shown if the e-mail protocol is set
to POP3)—Define how many new e-mails are retrieved to
mailbox.
Retrieve—Define which parts of the e-mails are retrieved:
Headers only, Partially (kB), or Msgs. & attachs. (not shown
if the e-mail protocol is set to IMAP4).
Retrieve attachments (not shown if the e-mail protocol
is set to POP3)—Choose whether you want to retrieve
e-mail with or without attachments.
Subscribed folders (not shown if the e-mail protocol is set
to POP3)—You can subscribe other folders in remote
mailbox as well and retrieve content from those folders.
Send copy to self—Select Yes to save a copy of the e-mail
to your remote mailbox and to the address defined in My
e-mail address.
Include signature—Select Yes if you want to attach a
signature to your e-mail messages.
My name—Enter your own name here. Your name replaces
your e-mail address in the recipient’s phone when the
recipient’s phone supports this function.
Automatic retrieval:
Header retrieval—When this function is on messages are
retrieved automatically. You can define when, and how
often, the messages are retrieved.
Messaging
58
Activating Header retrieval may increase your call costs
due to the data traffic.
Web service messages
Select Messaging > Options > Settings > Service
message. Choose whether you want to receive service
messages. If you want to set the phone to automatically
activate the browser and start a network connection to
retrieve content when the phone receives a service
message, select Download messages > Automatically .
Cell broadcast
Check the available topics and related topic numbers with
your service provider, and select Messaging > Options >
Settings > Cell broadcast to change the settings.
Language—All allows you to receive cell broadcast
messages in all supported languages. Selected allows you
to choose languages in which you would like to receive
cell broadcast messages. If you cannot find the desired
language, select Other.
Topic detection—If you have set Topic detection > On,
the phone automatically searches for new topic numbers,
and saves the new numbers without a name to the topic
list. Select Off if you do not want to save new topic
numbers automatically.
Other settings
Select Messaging > Options > Settings > Other.
Save sent messages—Choose if you want to save a copy of
every text message, multimedia message, or e-mail that
you have sent. Saved messages will be stored in the Sent
folder.
Tip! If Memory card is selected, activate the offline
profile before opening the memory card slot door or
removing the memory card. When the memory card
is not available, messages are saved in the phone
memory.
No. of saved msgs.—Define how many sent messages may
be stored in the Sent folder at a time. The default limit is
20 messages. When the limit is reached, the oldest
message is deleted.
Memory in use—Choose which memory to which you want
to save your messages: Phone memory or Memory card.
E-mail notification—Choose whether you want to see the
new e-mail indication, a tone, or a note when new mail is
received in the mailbox.
Messaging
59
Messaging
60
Calendar
61
Calendar
Press any key (1–9) in any calendar view. A meeting entry
opens, and the characters you enter are added to the
Subject field.
Create calendar entries
1Press the menu key, select
Calendar > Options > New
entry, and select from the
following options:
Meeting—To remind you
of an appointment that
has a specific date and
time.
Memo—To write a general
entry for a day.
Anniversary—To remind
you of birthdays or special
dates. Anniversary entries are repeated every year.
2Fill in the fields. Press the scroll key to move between
fields.
Alarm (meetings only)—Select On, and scroll down to
fill in the Alarm time and Alarm date fields. in the
day view indicates an alarm. To stop a calendar alarm,
select Silence to turn off the calendar alarm tone. The
reminder text stays on the screen. Select Stop to end
the calendar alarm. Select Snooze to set the alarm to
snooze.
Repeat—Scroll right to change the entry to be
repeating ( is shown in the day view).
Repeat until—You can set an end date for the repeated
entry.
Synchronization:
Private—after synchronization, the calendar entry can
be seen only by you and it will not be shown to others
with online access to view the calendar.
Public—The calendar entry is shown to others who
have access to view your calendar online.
None—The calendar entry will not be copied to your PC
when you synchronize.
3To save the entry, select Done.
Tip! To send a calendar note to a compatible phone,
select Options > Send > Via text message, Via
multimedia, or Via Bluetooth.
Calendar
62
Calendar views
Tip! Select Options > Settings to change the view
that is shown when you open the calendar or the
starting day of the week.
In the month view, dates that have calendar entries are
marked with a small triangle at the right bottom corner.
In the week view, memos and anniversaries are placed
before 8 o’clock.
Icons in the day and week views:
Memo
Anniversary
There is no icon for Meeting
To go to a certain date, select Options > Go to date, write
the date, and select OK.
Press # to jump to today.
Tip! You can move calendar and to-do data from
many different Nokia phones to your phone, or
synchronize your calendar and to-do data to a
compatible PC using Nokia PC Suite. See the
CD-ROM supplied with the phone.
Set a calendar alarm
You can set an alarm to remind you of a meeting. This
option is not available for notes and anniversaries.
1Open a note in which you want to set an alarm, and
select Alarm > On.
2Set the Alarm time and Alarm date.
3Scroll down to Repeat, and scroll right to select how
often you want the alarm to be repeated.
4Select Done.
To delete a calendar alarm, open the note in which you
want to delete an alarm, and select Alarm > Off.
Remove calendar entries
Removing past entries in Calendar saves space in the
memory of the phone.
To remove more than one event at a time, go to the Month
view and select Options > Delete entry and one of the
following options:
Before date—Deletes all calendar notes that take place
before a certain date you define.
All entries—Deletes all calendar notes.
Calendar settings
To modify the Calendar alarm tone, Default view, Week
starts on, and Week view title, select Options > Settings.
Web
63
Web
Various service providers maintain pages specifically
designed for mobile devices. To access these pages, press
Menu and select Web. These pages use the wireless
markup language (WML), extensible hypertext markup
language (XHTML), or hypertext markup language (HTML).
Check the availability of services, pricing, and tariffs with
your network operator or service provider. Service
providers will also give you instructions on how to use their
services.
To start a connection, press and hold 0 in the standby
mode.
Access the Web
• Save the settings that are needed to access the Web
page that you want to use. See the sections ’Receive
browser settings’, p. 63 or ’Enter the settings manually’,
p. 63.
• Make a connection to the Web. See ’Make a
connection’, p. 64.
• Browse the pages. See ’Browse’, p. 65.
• End the connection to the Web. See ’End a connection’,
p. 67.
Receive browser settings
Tip! Settings may be available on the Web site of a
network operator or service provider.
You may receive Web service settings in a special text
message from the network operator or service provider
that offers the Web page. See ’Data and settings’, p. 50.
For more information, contact your network operator or
service provider.
Enter the settings manually
Follow the instructions given to you by your service
provider.
1Select Tools > Settings > Connection > Access
points, and define the settings for an access point. See
’Connection settings’, p. 91.
2Select Web > Options > Bookmark manager > Add
bookmark. Write a name for the bookmark and the
address of the page defined for the current access
point.
Web
64
Bookmarks view
A bookmark consists of an Internet address (mandatory),
bookmark title, access point, and if the Web page requires,
a user name and password.
Options in the bookmarks view are Open,
Download, Back to page, Bookmark manager,
Mark/Unmark, Navigation options, Advanced
options, Send, Find bookmark, Details, Settings,
Help, and Exit.
Note: Your device may have some bookmarks
loaded for sites not affiliated with Nokia. Nokia
does not warrant or endorse these sites. If you
choose to access them, you should take the same
precautions, for security or content, as you would
with any Internet site.
Icons in the bookmark view:
The start page defined for the default access point. If
you use another default access point to browse, the start
page is changed accordingly.
The automatic bookmarks folder contains bookmarks
( ) that are collected automatically when you browse
pages. The bookmarks in this folder are automatically
organised according to domain.
Any bookmark showing the title or Internet address of
the bookmark.
Add bookmarks manually
1In the bookmarks view, select Options > Bookmark
manager > Add bookmark.
2Start to fill in the fields. Only the URL address must be
defined. The default access point is assigned to the
bookmark if no other one is selected. Press * to enter
special characters such as /, ., :, and @. Press the clear
key to clear characters.
3Select Options > Save to save the bookmark.
Send bookmarks
Scroll to a bookmark, and select Options > Advanced
options > Send > Via text message. Press the call key to
send. It is possible to send more than one bookmark at the
same time.
Tip! To send a bookmark, scroll to it, and select
Options > Send > Via text message.
Make a connection
Once you have stored all the required connection settings,
you can access the pages.
1Select a bookmark or enter the address in the field
( ). When you enter the address, matching
bookmarks are shown above the field. Scroll up to
select a matching bookmark.
Web
65
Options when browsing (depending on the page
you are viewing) are Open, Accept, Remove file,
Open in viewer, Open Wallet, Service options,
Bookmarks, Save as bookmark, View images,
Navigation options, Advanced options, Show
images, Send bookmark, Find, Details, Settings,
Help, and Exit.
2Press the scroll key to download the page.
Connection security
If the security indicator is displayed during a
connection, the data transmission between the device and
the Internet gateway or server is encrypted.
The security icon does not indicate that the data
transmission between the gateway and the content server
(or place where the requested resource is stored) is secure.
The service provider secures the data transmission
between the gateway and the content server.
Select Options > Details > Security to view details about
the connection, encryptions status, and information about
server and user authentication.
Security features may be required for some services, such
as banking services. For such connections you need
security certificates. For more information, contact your
service provider. See also ’Certificate management’, p. 95.
Browse
On a browser page, new links appear underlined in blue
and previously visited links in purple. Images that act as
links have a blue border around them.
To open a link, to check boxes, and make selections, press
the scroll key.
To go to the previous page while browsing, select Back. If
Back is not available, select Options > Navigation
options > History to view a chronological list of the pages
you have visited during a browse session. The history list
is cleared each time a session is closed.
To retrieve the latest content from the server, select
Options > Navigation options > Reload.
To save a bookmark, select Options > Save as bookmark.
Tip! To access the bookmarks view while browsing,
press and hold down the scroll key. To return to the
browser view again, select Options > Back to page.
To save a page while browsing, select Options >
Advanced options > Save page. You can save pages
either to the phone memory or on a memory card, and
browse them when offline. To access the pages later, scroll
right in the bookmarks view to open the Saved pages
view.
Web
66
To enter a new URL address, select Options > Navigation
options > Go to web address.
To open a sublist of commands or actions for the currently
open page, select Options > Service options.
You can download items such as ringing tones, images,
operator logos, themes, and video clips. Downloaded
items are handled by the respective applications in your
phone, for example, a downloaded image is saved in
Gallery.
Press # to jump to the end of a page and * to jump to the
beginning of a page.
Copyright protections may prevent some images, ringing
tones, and other content from being copied, modified,
transferred, or forwarded.
Important: Only install software from sources
that offer adequate protection against harmful
software.
To download and view new Web service messages while
browsing, select Options > Advanced options > Read
service msgs. (shown only if there are new messages). See
also ’Web service messages’, p. 51.
Tip! The browser collects bookmarks automatically
while you browse Web pages. The bookmarks are
stored to the automatic bookmarks folder ( ) and
automatically organized according to domain. See ’Web
settings’, p. 67.
View saved pages
If you regularly browse pages that contain information
which does not change very often, you can save and
browse them when offline. In the saved pages view you can
also create folders to store your saved browser pages.
Options in the saved pages view are Open, Back to
page, Reload, Saved pages, Mark/Unmark,
Navigation options, Advanced options, Details,
Settings, Help, and Exit.
To open the saved pages view, scroll right in the bookmarks
view. In the saved pages view, press the scroll key to open
a saved page ( ).
To save a page while browsing, select Options > Advanced
options > Save page.
To start a connection to the browser service and to
download the latest version of the page, select Options >
Reload. The phone stays online after you reload the page.
Download and purchase items
You can download items such as ringing tones, images,
operator logos, themes, and video clips. These items can be
Web
67
provided free, or you can purchase them. Downloaded
items are handled by the respective applications in your
phone, for example, a downloaded photo can be saved in
Gallery.
Important: Only install applications from sources
that offer adequate protection against harmful
software.
1To download the item, scroll to the link, and press the
middle of the Scroll key.
If the item is provided free, select Accept. Once
downloaded, the content is automatically opened in a
suitable application.
To cancel the download, select Cancel.
2Select the appropriate option to purchase the item, for
example, ’Buy’.
3Carefully read all the information provided.
If the online content is compatible, you can use your
wallet information to make the purchase.
4Select Open Wallet. You are prompted for your wallet
code. See ’Create a wallet code’, p. 73.
5Select the appropriate card category from your wallet.
6Select Fill in. This uploads the selected wallet
information.
If the wallet does not contain all information necessary
for the purchase, you are requested to enter the
remaining details manually.
Note: Copyright protections may prevent some
images, ringtones and other content from being
copied, modified, transferred, or forwarded.
End a connection
Select Options > Advanced options > Disconnect, or
press and hold End to quit browsing and to return to the
standby mode.
Empty the cache
The information or services you have accessed are stored
in the cache memory of the phone.
Note: A cache is a memory location that is used to
store data temporarily. If you have tried to access
or have accessed confidential information that
requires passwords, empty the cache after each
use. The information or services you have accessed
is stored in the cache memory of the phone. To
empty the cache, select Options > Navigation
options > Clear cache.
Web settings
Select Options > Settings and select one of the following:
Web
68
Default access point—To change the default access point,
press the middle of the scroll key to open a list of available
access points. See ’Connection settings’, p. 91.
Show images—To select if you want to load images while
browsing or not. If you select No, to load images later
during browsing, select Options > Show images.
Font size—To choose the text size.
Default encoding—If text characters are not shown
correctly, you may choose another encoding according to
language.
Automatic bookmarks—To disable automatic bookmark
collecting, select Off. If you want to continue collecting
automatic bookmarks but hide the folder from the
bookmarks view, select Hide folder.
Screen size—To select what is shown when you browse.
Select Select. keys only or Full screen.
Search page—To define a Web page that is downloaded
when you select Navigation options > Open search page
in the bookmarks view, or when browsing.
Volume—If you want the browser to play sounds
embedded on Web pages, select a volume level.
Rendering—If you want the page layout shown as
accurately as possible when in Small screen mode, select
By quality. If you do not want external cascading style
sheets to be downloaded, select By speed.
Cookies—To enable or disable the receiving and sending of
cookies.
Cookies are a means of content providers to identify users
and their preferences for frequently used content.
Java/ECMA script—To enable or disable the use of scripts.
Security warnings—To hide or show security notifications.
Conf. DTMF sending—Choose whether you want to
confirm before the phone sends DTMF tones during a call.
See also ‘DTMF tones’ p. 23.
Wallet > On—To open the wallet automatically when a
compatible browser page is opened. See ’Wallet’, p. 72.
Office
69
Office
Info print—powered by HP
To print directly and wirelessly from your phone, press the
menu key, and select Office > Info print. You can print a
variety of contents from your phone to a Basic Print Profile
(BPP) equipped, Bluetooth-enabled printer, including MMS
messages, SMS messages, Email text, contacts, calendar
and notes.
Options in Info print are Select, Print, About
application, Help, and Exit.
Calculator
To add, substract, multiply, divide, calculate square roots
and percentages, press the menu key, and select Office >
Calculator.
Note: This calculator has limited accuracy and is
designed for simple calculations.
To save a number in the memory (indicated by M), select
Options > Memory > Save. To retrieve a number in
memory, select Options > Memory > Recall. To clear a
number in memory, select Options > Memory > Clear.
Calculate percentages
1Enter a number for which you want to calculate a
percentage.
2Select , , , or .
3Enter the percentage.
4Select .
Converter
To convert measures such as Length from one unit (Yards)
to another (Metres), press the menu key, and select
Office > Converter.
Options in Converter are Select unit/Change
currency, Conversion type, Currency rates, Help,
and Exit.
Note that Converter has limited accuracy, and rounding
errors may occur.
Office
70
1Scroll to select the Type field, to open a list of
measures. Scroll to the measure you want to use, and
select OK.
2Scroll to select the first Unit field. Select the unit from
which you want to convert and OK. Scroll to the next
Unit field, and select the unit to which you want to
convert.
3Scroll to the first Amount field, and enter the value
you want to convert. The other Amount field
automatically shows the converted value.
Press # to add a decimal and * for the +, - (for
temperature), and E (exponent) symbols.
Set base currency and exchange rates
Tip! To change the conversion order, enter the value
in the second Amount field. The result is shown in
the first Amount field.
Before you can make currency conversions, you need to
choose a base currency and add exchange rates. The rate
of the base currency is always 1. The base currency
determines the conversion rates of the other currencies.
1Select Converter > Options > Currency rates. A list of
currencies opens, and you can see the current base
currency at the top.
2To change the base currency, scroll to the currency,
and select Options > Set as base curr.
Tip! To rename a currency, go to the currency rates
view, scroll to the currency, and select Options >
Rename currency.
3Add exchange rates. Scroll to the currency, and enter a
new rate. The number of units of the currency equal
one unit of the base currency you have selected.
After you have inserted all the necessary exchange rates,
you can make currency conversions.
Note: When you change base currency, you must
enter the new rates, because all previously set
exchange rates are set to zero.
To-do
Create a task list
Press the menu key, and select Office > To-do to write
notes and maintain a task list.
To add a note, press any key to start to write the task in the
Subject field.
To set the due date for the task, scroll to the Due date field,
and enter a date.
To set the priority for the To-do note, scroll to the Priority
field, and scroll right to select the priority. High and low
Office
71
priority notes are indicated with the following icons:
(High) and (Low). There is no icon for Normal.
To mark a task as completed, scroll to it in the To-do list,
and select Options > Mark as done.
To restore a task, scroll to it in the To-do list, and select
Options > Mark as not done.
Notes
Press the menu key, and select Office > Notes to write
notes. You can send notes to other compatible devices and
save plain text files (TXT format) that you receive to Notes.
Recorder
Press the menu key, and select Office > Recorder to record
telephone conversations and voice memos. If you are
recording a telephone conversation, both parties hear a
tone every 5 seconds during recording.
My own
72
My own
Go to—add shortcuts
Default shortcuts:
Opens Calendar
Opens Inbox
Opens Notes
To store shortcuts (links to your favourite images, notes,
bookmarks, and so on), press the menu key, and select My
own > Go to. Shortcuts are added only from the individual
applications, for example Gallery. Not all applications
have this function.
1Select an item from an application to which you want
to add a shortcut.
2Select Add to ’Go to’. A shortcut in Go to is
automatically updated if you move the item to which
it is pointing (for example, from one folder to another).
To change the identifier in the lower left corner of the
shortcut icon, select Options > Shortcut icon.
Delete a shortcut
Select the shortcut, and press the clear key. The default
shortcuts Notes, Calendar, and Inbox cannot be deleted.
When you remove an application or a document which has
a shortcut in Go to, the shortcut icon of the removed item
is dimmed in the Go to view. The shortcut can be deleted
next time you try to open the shortcut.
Wallet
Press Menu, and select My own > Wallet. Wallet provides
you with a storage area for your personal information,
such as credit and debit card numbers, addresses, and
other useful data (for example, user names and passwords).
The information stored in Wallet can be retrieved while
browsing to automatically fill in online forms on browser
pages (for example, when the service asks for credit card
details). Data in Wallet is encrypted and protected with a
wallet code that you define.
Wallet automatically closes after 5 minutes. Enter the
wallet code to regain access to the contents. You can
change this automatic time-out period if required. See
"Wallet settings," page 74.
Options in the Wallet main view are Open,
Settings, Help, and Exit.
My own
73
Create a wallet code
Each time you open Wallet, you are prompted for a wallet
code. Enter the code that you have created, and select OK.
When you open Wallet for the first time, you must create
your own wallet code:
1Enter a code of your choice (4–10 alphanumeric
characters), and select OK.
2You are prompted to verify the code. Enter the same
code, and select OK. Do not give your wallet code to
anyone else.
If you enter the wallet code incorrectly on three
consecutive occasions, Wallet is blocked for 5 minutes.
The block time increases if further incorrect wallet codes
are entered.
If you forget your wallet code, you must reset the code, and
you will lose all information stored in Wallet. See "Reset
the wallet and wallet code," page 75.
Store personal card details
1Select the Cards category from the main Wallet menu,
and press the scroll key.
2Select a type of card from the list, and press the scroll
key.
Payment cards—Credit and debit cards.
Loyalty cards—Membership and store cards.
Online acc. cards—Personal user names and passwords
to online services.
Address cards—Basic contact details for home or the
office.
User info cards—Customized personal preferences for
online services.
3Select Options > New card. An empty form opens.
4Fill in the fields, and select Done.
You can also receive card information directly to the
phone from a card issuer or service provider (if they offer
this service). You will be notified which category the card
belongs to. Save or discard the card. You can view and
rename a saved card, but you cannot edit it.
You can open, edit, or delete the fields in the card. Any
changes will be saved upon exiting.
Create personal notes
Personal notes are a means of storing sensitive
information such as a bank account number. You can
access the data in a personal note from the browser. You
can also send the note as a message.
1Select the Personal notes category from the main
Wallet menu, and press the scroll key.
2Select Options > New card. An empty note opens.
3Press 1–0 to start writing. Press the clear key to clear
characters.
My own
74
4Select Done to save.
Create a wallet profile
After you have stored your personal details, you can
combine them into a wallet profile. You can use a wallet
profile to retrieve wallet data from different cards and
categories to the browser, for example, when you are
filling in a form.
1Select the Wallet profiles category from the main
wallet menu, and press the scroll key.
2Select Options > New profile. A new wallet profile
form opens.
3Fill in the fields or select an option from the listed
items:
Profile name—Choose and enter a name for the profile.
Payment card—Select a card from the list.
Loyalty card—Select a card from the list.
Online access card—Select a card from the list.
Shipping address—Select an address from the list.
Billing address—By default, this is the same as the
shipping address. If you require a different address,
select one from the address card category.
User info card—Select a card from the list.
Receive e-receipt—Select a destination from the list.
Deliver e-receipt—Select To phone, To e-mail, or To
pho. & e-mail.
RFID sending—Set to On or Off. Defines whether or not
your unique phone identification is sent with the wallet
profile.
4Select Done.
Example: By uploading your payment card details you do
not need to enter the card number and expiration date
each time you need them (depending on the content being
browsed). Also, you can retrieve your user name and
password stored as an access card when connecting to a
mobile service that requires authentication.
View ticket details
You can receive notifications of tickets purchased online
through the browser. Received notifications are stored in
the wallet. To view the notifications:
1Select the Tickets category from the main Wallet
menu, and press the scroll key.
2Select Options > View. None of the fields within the
notification can be modified.
Wallet settings
From the main Wallet menu, select Options > Settings
and the following:
Wallet code—Change your wallet code. You are prompted
to enter the current code, create a new code, and verify the
new code.
My own
75
RFID—Set the phone ID code, type, and sending options.
Automatic close—Change the automatic time-out period
(1–60 minutes). After the time-out period has elapsed, the
wallet code must be re-entered to gain access to the
contents.
Reset the wallet and wallet code
This operation erases all contents of Wallet.
To reset both the contents of Wallet and the wallet code:
1Enter *#7370925538# in the standby mode.
2Enter the phone lock code, and select OK. See
‘Security’, p. 94.
When opening Wallet again, you must enter a new wallet
code. See "Create a wallet code," page 73.
IM—instant messaging (chat)
76
IM—instant messaging (chat)
Press Menu, and select Connect. > IM.
Instant messaging is a network service which allows you
to converse with other people using instant messages and
join discussion forums (IM groups) with specific topics.
Various service providers maintain IM servers that you can
log in to once you have registered to an IM service.
Options in the IM main view are Open, Login/
Logout, Settings, Help, and Exit.
Note: Check the availability of chat services,
pricing, and tariffs with your network operator
and/or service provider. Service providers will also
give you instructions on how to use their services.
Receive IM settings
Tip: To log in automatically when you start IM,
without having to enter your user ID and password
each time, select Options > Settings > Server
settings > IM login type > Automatic.
You must save the settings to access the service that you
want to use. You may receive the settings in a special text
message from the network operator or service provider
that offers the IM service. See ‘Data and settings’, p. 50.
You can also enter the settings manually. See "Chat server
settings," page 81.
Connect to a server
1Open IM to have your phone connect to the IM server
in use. To change the IM server in use and save new IM
servers, see "Chat server settings," page 81.
2Enter your user ID and password, and press the scroll
key to log in. You obtain the user ID and password for
the IM server from your service provider.
You can select Cancel to stay offline; to log in to the
IM server later, select Options > Login. You cannot
send or receive messages while you are offline.
3To log out, select Options > Logout.
Modify your settings
Select Options > Settings > IM settings:
Use screen name (shown only if IM groups supported by
the server)—To enter a nickname (up to10 characters),
select Yes.
IM—instant messaging (chat)
77
IM presence—To allow others to see if you are online,
select Active for all.
Allow messages from—To allow messages from all,
select All.
Allow invitations from—To allow invitations only from your
IM contacts, select IM contacts only. IM invitations are
sent by IM contacts who want you to join their groups.
Msg. scrolling speed—To select the speed at which new
messages are displayed.
Sort IM contacts—To sort your IM contacts Alphabetically
or By online status.
Availability reloading—To choose how to update
information about whether your IM contacts are online or
offline, select Automatic or Manual.
Search for groups and users
To search for groups, in the IM groups view, select
Options > Search > Groups. You can search by Group
name, Topic, and Members (user ID).
To search for users, in the IM contacts view, select
Options > Search > Users. You can search by User’s
name, User ID, Phone number, and E-mail address.
Join and leave a group
To join an IM group that you have saved, scroll to the
group, and press the scroll key.
To join an IM group not on the list, but for which you know
the group ID, select Options > Join new group. Enter the
group ID, and press the scroll key.
To leave the IM group, select Options > Leave IM group.
Chat
Once you have joined an IM group, you can view the
messages that are exchanged there, and send your own
messages.
Options while chatting are Send, Send private
msg., Reply, Forward, Insert smiley, Send
invitation, Leave IM group, Add to banned list,
Group, Record convers./Stop recording, Help,
and Exit.
To send a message, write the message in the message
editor field, and press the scroll key.
To send a private message to a participant, select
Options > Send private msg., and select the recipient.
Write the message, and then press the scroll key.
IM—instant messaging (chat)
78
To reply to a private message sent to you, select the
message, and select Options > Reply.
To invite IM contacts who are online to join the IM group,
select Options > Send invitation, select the contacts you
want to invite, write the invitation message, and press the
scroll key.
To prevent receiving messages from certain participants,
select Options > Blocking options, and select from the
following:
Add to blocked list—To block messages from the
currently selected participant.
Add ID to list manually—To enter the user ID of the
participant. Enter the ID, and press the scroll key.
View blocked list—To see the participants whose
messages are being blocked.
Unblock—To select the user that you want to remove from
the blocked list. Press the scroll key.
Record chats
Options in the recorded chats view are Open,
Delete, Send, Mark/Unmark, Login/Logout,
Settings, Help, and Exit.
To record to a file the messages that are exchanged during
a conversation or while you are joined in an IM group,
select Options > Record., enter a name for the
conversation file, and press the scroll key. To stop
recording, select Options > Stop recording.
The recorded conversation files are automatically saved in
the Recorded chats.
To view the recorded chats, in the main view, select
Recorded chats, select the conversation, and press the
scroll key.
View and start conversations
Go to the Conversations view to see a list of the individual
conversation participants with whom you have an ongoing
conversation.
To view a conversation, scroll to a participant, and press
the scroll key.
Options when viewing a conversation are Send,
Add to IM contacts, Insert smiley, Forward,
Record convers./Stop recording, Blocking
options, End conversation, Help, and Exit
To continue the conversation, write your message, and
press the scroll key.
To return to the conversations list without closing the
conversation, select Back.
IM—instant messaging (chat)
79
To close the conversation, select Options > End
conversation. Ongoing conversations are automatically
closed when you exit IM.
To start a new conversation, select Options > New
conversation:
Select recipient—To see a list of your chat contacts that
are currently online. Scroll to the contact that you want to
start a conversation with, and press the scroll key.
The user ID is provided by the service provider to those who
register to this service.
Enter user ID—To enter the user ID of the user you want to
start a conversation with, and press the scroll key.
To save a conversation participant to your IM contacts,
scroll to the participant, and select Options > Add to IM
contacts.
To send automatic replies to incoming messages, select
Options > Set auto reply on. Enter the text, and select
Done. You can still receive messages.
Contacts
Go to the IM contacts to retrieve chat contact lists from
the server, or to add a new chat contact to a contact list.
When you log in to the server, the previously used chat
contact list is retrieved from the server automatically.
Options in the IM contacts view are Open
conversation, Open, Change contact list, Reload
user availab., Belongs to groups, New IM contact,
Move to other list, Edit, Delete, Switch tracking
on, Blocking options, Login/Logout, Settings,
Help, and Exit.
To create a new contact, select Options > New IM
contact > Enter manually. Fill in the Nickname and User
ID fields, and select Done.
To move a contact from a list on the server to the retrieved
list, select Options > New IM contact > Move from other
list.
To change the chat contact list, select Options > Change
contact list.
Select from the following options:
Open conversation—To start a new conversation or
continue an ongoing conversation with the contact.
Switch tracking on—To have the phone notify you every
time the chat contact goes online or offline.
Belongs to groups—To see which groups the chat contact
has joined.
Reload user availab.—To update information about
whether the contact is online or offline. The online status
is shown by an indicator next to the contact name. This
IM—instant messaging (chat)
80
option is not available if you have set the Availability
reloading to Automatic in IM settings.
Manage groups
Options in the IM groups view are Open, Join
new group, Create new group, Leave IM group,
Group, Search, Login/ Logout, Settings, Help, and
Exit.
Go to the IM groups view to see a list of the IM groups
that you have either saved or are currently joined to.
Scroll to a group, and select Options > Group from the
following:
Save—To save an unsaved group that you are currently
joined to.
View participants—To see who are currently joined to the
group.
Details—To see the group ID, topic, participants,
administrators of the group (shown only if you have the
editing rights), the list of blocked participants (shown only
if you have the editing rights), and whether private
conversations are allowed in the group.
Settings—To view and edit the chat group settings. See
"Create a new group," page 80.
Administer a group
Create a new group
Select IM groups > Options > Create new group. Enter
the settings for the group.
You can edit the settings for an IM group if you have
administrator rights to the group. The user who creates a
group is automatically given administrator rights to it.
Group name, Group topic, and Welcome note—To add
details that the participants see when they join the group,
Group size—To define the maximum number of members
allowed to join the group,
Allow search—To define if others can find the chat group
by searching.
Editing rights—To define the chat group participants to
whom you want to give rights to invite contacts to join the
IM group and edit the group settings.
Group members—See "Add and remove group members,"
page 81.
Banned list—Enter the participants that are not allowed to
join the IM group.
Allow private msgs.—To allow messaging between
selected participants only.
IM—instant messaging (chat)
81
Group ID—The group ID is created automatically and
cannot be changed.
Add and remove group members
To add members to a group, select IM groups, scroll to an
IM group, and select Options > Group > Settings > Group
members > Selected only or All.
To remove a member from the IM group, scroll to the
member, and select Options > Remove. To remove all
members, select Options > Remove all.
Chat server settings
Select Options > Settings > Server settings. You may
receive the settings in a special text message from the
network operator or service provider that offers the chat
service. You obtain the user ID and password from your
service provider when you register to the service. If you do
not know your user ID or password, contact your service
provider.
To change the IM server to which you wish to connect,
select Default server.
To add a new server to your list of IM servers, select
Servers > Options > New server. Enter the following
settings:
Server name—Enter the name for the chat server.
Access point in use—Select the access point you want to
use for the server.
Web address—Enter the URL address of the IM server.
User ID—Enter your user ID.
Password—Enter your login password.
Connectivity
82
Connectivity
Bluetooth connection
Bluetooth technology enables wireless connections to
send images, video clips, music and sound clips, and notes,
or to connect wirelessly to compatible devices with
Bluetooth technology such as computers. Since devices
with Bluetooth technology communicate using radio
waves, your phone and the other device do not need to be
in direct line-of-sight. The two devices only need to be
within a maximum of 32 feet (10 meters) of each other,
although the connection can be subject to interference
from obstructions such as walls or from other electronic
devices.
This device is compliant with Bluetooth Specification 1.2
supporting the following profiles: Generic Access Profile,
Serial Port Profile, Bluetooth Printing Profile, Dial-up
Networking Profile, Headset Profile, Handsfree Profile,
Generic Object Exchange Profile, Object Push Profile, File
Transfer Profile, and Basic Imaging Profile. To ensure
interoperability between other devices supporting
Bluetooth technology, use Nokia approved enhancements
for this model. Check with the manufacturers of other
devices to determine their compatibility with this device.
There may be restrictions on using Bluetooth technology in
some locations. Check with your local authorities or service
provider.
Features that use Bluetooth technology, or allow such
features to run in the background while using other
features, increase the demand on battery power and
reduces the battery life.
Bluetooth connection settings
Press the menu key, and select Connect. > Bluetooth.
Enter the following:
Bluetooth—Set to On or Off.
My phone’s visibility > Shown to all—Your phone can be
found by other devices with Bluetooth technology or
Hidden—Your phone cannot be found by other devices.
My phone’s name—Define a name for your phone. After
you have set a Bluetooth connection and changed My
phone’s visibility to Shown to all, your phone and this
name can be seen by other users with devices using
Bluetooth technology.
Connectivity
83
Send data
There can be only one active Bluetooth connection at a
time.
1Open an application where the item you wish to send is
stored. For example, to send an image to another
compatible device, select Gallery.
2Select the item, for example, an image, and Options >
Send > Via Bluetooth.
Tip! When searching for devices, some devices
may show only the unique addresses (device
addresses). To find the unique address of your
phone, enter the code *#2820# in the standby
mode.
The phone starts to search for devices within range.
Devices with Bluetooth technology that are within
range start to appear on the display one by one. You
can see a device icon, the name of the device, the
device type, or a short name.
Tip! If you have searched for devices earlier, a list
of the devices that were found previously is
shown first. To start a new search, select More
devices. If you switch off the phone, the list is
cleared.
To interrupt the search, select Stop. The device list
freezes, and you can start to form a connection to one
of the devices already found.
3Select the device with which you want to connect.
4If the other device requires pairing before data can be
transmitted, a tone sounds and you are asked to enter
a passcode.
Create your own passcode (1–16 digits), and agree
with the owner of the other device to use the same
code. The passcode is used only once.
Tip! To send text using a Bluetooth connection
(instead of text messages), select Notes, write
the text, and select Options > Send > Via
Bluetooth.
After pairing, the device is saved to the paired devices
view.
Pairing means authentication. The users of the devices
with Bluetooth technology should agree what the
passcode is and use the same passcode for both devices in
order to pair them. Devices that do not have a user
interface have a factory-set passcode.
When the connection has been established, the note
Sending data is shown.
The Drafts folder in Messaging does not store messages
sent using a Bluetooth connection.
Icons for different devices:
Computer
Phone
Audio or video
Connectivity
84
Headset
Other
Check the connection status
•When is shown in the standby mode, a Bluetooth
connection is active.
•When is blinking, your phone is trying to connect
to the other device.
•When is shown continuously, the Bluetooth
connection is active.
Pair devices
Tip! To define a short name (nickname or alias),
scroll to the device and select Options > Assign
short name in the paired devices view. This
name helps you to recognize a certain device
during device search or when a device requests
a connection.
Paired devices are easier to recognize; they are indicated
by in the device search. In the Bluetooth main view,
scroll right to open the paired devices view ( ).
To pair with a device, select Options > New paired
device. The phone starts a device search. Select the
device. Exchange passcodes. See step 4 in "Send data,"
page 83.
To cancel a pairing, scroll to the device, and select
Options > Delete. If you want to cancel all pairings, select
Options > Delete all.
Tip! If you are currently connected to a device and
delete the pairing with that device, pairing is
removed immediately, but the connection remains
active.
To set a device to be authorized or unauthorized, scroll to
a device, and select from the following options:
Set as authorized—Connections between your phone and
this device can be made without your knowledge. No
separate acceptance or authorization is needed. Use this
status for your own devices, such as your compatible
headset or PC, or devices that belong to someone you trust.
indicates authorized devices in the paired devices view.
Set as unauthorized—Connection requests from this
device must be accepted separately every time.
Receive data
When you receive data using a Bluetooth connection, a
tone sounds, and you are asked if you want to accept the
message. If you accept, is shown, and the item is
placed in the Inbox folder in Messaging. Messages received
using a Bluetooth connection are indicated by . See
"Inbox," p. 49.
Connectivity
85
Switch off Bluetooth
To switch off Bluetooth connectivity, select Bluetooth >
Off.
PC connections
You can use your phone with a variety of PC connectivity
and data communications applications, for example, the
MMC card reader. With Nokia PC Suite you can
synchronize contacts, calendar and to-do notes between
your phone and a compatible PC. For further information
on how to install Nokia PC Suite (compatible with
Windows 2000 and Windows XP), see the User Guide for
Nokia PC Suite and the Nokia PC Suite help in the ‘Install’
section on the CD-ROM.
CD-ROM
The CD-ROM should launch after you insert it into the
CD-ROM drive of a compatible PC. If not, proceed as
follows: Open Windows Explorer, right-click the CD-ROM
drive where you inserted the CD-ROM, and select
Autoplay.
Your phone as a modem
You can use your phone as a modem to send and receive
e-mail, or to connect to the Internet with a compatible PC
by using a Bluetooth connection or a data cable. Detailed
installation instructions can be found in the User Guide for
Nokia PC Suite in Modem options on the CD-ROM.
Connection manager
You may have multiple data connections active at the
same time when you are using your phone in GSM
networks. Press the menu key, and select Connect. >
Conn. mgr. to view the status of multiple data
connections, view details on the amount of data sent and
received, and end connections. When you open Conn.
mgr., you can see the following information:
•Open data connections: data calls ( ) and packet
data connections ( )
•The status of each connection
•The amount of data uploaded and downloaded for
each connection (shown for packet data connections
only)
•The duration of each connection (shown for data calls
only)
Note: The actual time invoiced for calls by
your service provider may vary, depending on
network features, rounding off for billing, and
so forth.
Connectivity
86
To end a connection, scroll to a connection, and select
Options > Disconnect.
To close all currently open connections, select Options >
Disconnect all.
View data connection details
Options in Conn. mgr. main view when there are
one or more connections are Details, Disconnect,
Disconnect all, Help, and Exit.
To view the details of a connection, scroll to a connection,
and select Options > Details.
Name—The name of the Internet access point (IAP) in use,
or the modem connection name if the connection is a
dial-up connection.
Bearer—The type of data connection: Data call, High sp.
GSM, or Packet data.
Status—The current status of the connection: Connecting,
Conn.(inact.), Conn.(active), On hold, Disconnctng., or
Disconnected.
Received—The amount of data, in bytes, received to the
phone.
Sent—The amount of data, in bytes, sent from the phone.
Duration—The length of time that the connection has
been open.
Speed—The current speed of both sending and receiving
data in kilobytes per second.
Name—Access point name used.
Dial-up—The dial-up number used.
Shared (not shown if the connection is not shared)—The
number of applications using the same connection.
Remote synchronization
Press the menu key, and select Connect. > Sync. Sync
enables you to synchronize your calendar and contacts
with various calendar and address book applications on a
compatible computer or on the Internet.
The synchronization application uses SyncML technology
for synchronization. For information on SyncML
compatibility, contact the supplier of the calendar or
address book application you want to synchronize your
phone data with.
You may receive syncronization settings in a special text
message. See "Data and settings,", p. 50.
Connectivity
87
New synchronization profile
Options in the Sync main view are Synchronize,
New sync profile, Edit sync profile, Delete, View log,
Set as default, Help, and Exit.
1If no profiles have been defined, the phone asks if you
want to create a new profile. Select Yes.
To create a new profile in addition to existing ones,
select Options > New sync profile. Choose whether you
want to use the default setting values or copy the
values from an existing profile to be used as the basis
for the new profile.
2Define the following:
Sync profile name—Write a descriptive name for the
profile.
Data bearer—Select the connection type: Web,
Bluetooth, or Data cable.
Access point—Select an access point to use for the data
connection.
Host address—Contact your service provider or system
administrator for the correct values.
Port—Contact your service provider or system
administrator for the correct values.
User name—Your user ID for the synchronization server.
Contact your service provider or system administrator
for your correct ID.
Password—Write your password. Contact your service
provider or system administrator for the correct value.
Allow configuration—Select Yes if you want to allow
the server to start a synchronization.
Auto-accept all reqs.—Select No if you want the phone
to ask you before a synchronization initialized by the
server is started.
Network authentic. (shown only if Data bearer is set to
Web)—Select Yes to enter a network user name and
password. Scroll down to view the user name and
password fields.
Scroll right to select: Calendar, Contacts, or Notes.
•Select Yes if you want to synchronize the selected
database.
•In Remote database, select the synchronization type:
Normal (two-way synchronization), To server only,
or To phone only.
•Enter a correct path to the remote calendar, address
book, or notes database on the server.
3Select Back to save the settings and return to the main
view.
Synchronize data
In the Sync main view, you can see the different
synchronization profiles and the kind of data to be
synchronized.
1Select a synchronization profile and Options >
Synchronize. The status of the synchronization is
shown at the bottom of the screen.
Connectivity
88
To cancel synchronization before it finishes, press
Cancel.
2You are notified when the synchronization is
complete. After synchronization is complete, select
Options > View log to open a log file showing the
synchronization status (Complete or Incomplete) and
how many calendar or contact entries have been
added, updated, deleted, or discarded (not
synchronized) in the phone or on the server.
Device manager
Press Menu, and select Connect. > Dev. mgr. You may
receive server profiles and different configuration settings
from your network operator, service provider, or company
information management department. These
configuration settings may include access point settings
for data connections and other settings used by different
applications in your phone.
To connect to a server and receive configuration settings
for your phone, select Start configuration.
To allow or deny receiving of configuration settings from
a service provider, select Enable config. or Disable config..
Server profile settings
Contact your service provider for the correct settings.
Server name—Enter a name for the configuration server.
Server ID—Enter the unique ID to identify the configuration
server.
Server password—Enter a password to identify your phone
to the server.
Session mode— Select Bluetooth or Web.
Access point—Select an access point to be used when
connecting to the server.
Host address—Enter the URL address of the server.
Port—Enter the port number of the server.
User name and Password—Enter your user name and
password.
Allow configuration—To receive configuration settings
from the server, select Yes.
Auto-accept all reqs.—If you want the phone to ask for
confirmation before accepting a configuration from the
server, select No.
Tools
89
Tools
Settings
To change settings, press the menu key, and
select Tools > Settings. Scroll to select a setting group,
and press the scroll key to open it. Scroll to select a setting
you want to change, and press the scroll key .
Phone settings
General
Phone language—Changing the language of the display
texts in the phone also affects the format used for date
and time and the separators used, for example, in
calculations. Automatic selects the language according to
the information on the SIM card. After you change the
display text language, the phone restarts.
Changing the settings for Phone language or Writing
language affects every application in the phone, and the
change remains effective until you change these settings
again.
Writing language—Changing the language affects the
characters and special characters available when writing
text and using the predictive text dictionary.
Predictive text—You can set the predictive text input On
or Off for all editors in the phone. The predictive text
dictionary is not available for all languages.
Welcome note or logo—The welcome note or logo is
displayed briefly each time you switch on the phone.
Select Off to disable the Welcome note or logo, Text to
write a welcome note (up to 50 letters), or Image to select
a photo or picture from Gallery.
Orig. phone settings—You can reset some of the settings
to their original values. To do this, you need the lock code.
See "Security," page 94 and "Phone and SIM," page 94.
After resetting, the phone may take a longer time to power
on. Documents and files are unaffected.
Standby mode
Active standby—Use shortcuts to applications in the
standby mode. See ‘Active standby mode’, p. 20.
Left selection key—To assign a shortcut to the left
selection key in the standby mode, select an application
from the list.
Tools
90
Right selection key—To assign a shortcut to the right
selection key in the standby mode, select an application
from the list.
To assign keypad shortcuts for the different presses of the
scroll key, select an application from the list. The scroll key
shortcuts are not available if the active standby is on.
Operator logo—This setting is visible only if you have
received and saved an operator logo. You can choose if
you want the operator logo to show or not.
Display
Brightness - You can change
the brightness of the display
to lighter or darker. The
brighness of the display is
automatically adjusted
according to the
environment.
Screen saver timeout—The
screen saver is activated
when the timeout period is
over.
Light time-out—Select a timeout after which the
backlight is switched off.
Call settings
Send my caller ID (network service)—You can set your
phone number to be displayed to (Yes) or hidden from (No)
the person whom you are calling, or the value may be set
by the network operator or service provider when you
make a subscription (Set by network).
Call waiting (network service)—If you have activated call
waiting, the network notifies you of a new incoming call
while you have a call in progress. Select Activate to
request the network to activate call waiting, Cancel to
request the network to deactivate call waiting, or Check
status to check if the function is active or not.
Reject call with SMS—Select Yes to send a text message to
a caller informing why you could not answer the call. See
‘Answer or reject a call’, p. 22.
Message text—Write a text to be sent in a text message
when you reject a call.
Tip! To change the settings for call diverting, press
the menu key, and select Tools > Settings > Call
forwarding. See "Call diverting," page 97.
Automatic redial—Select On, and the phone makes a
maximum of ten attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialing
press the end key.
Tools
91
Summary after call—Activate this setting if you want the
phone to briefly display the approximate duration of the
last call.
Speed dialling—Select On, and the numbers assigned to
the speed dialing keys (2–9) can be dialled by pressing and
holding the key. See also ‘1-touch dialing’, p. 21.
Anykey answer—Select On, and to answer an incoming
call, briefly press any key, except the left and right
selection keys, the power key, and the end key.
Line in use (network service)—This setting is shown only if
the SIM card supports two subscriber numbers; that is, two
phone lines. Select which phone line you want to use for
making calls and sending text messages. Calls on both lines
can be answered irrespective of the selected line. If you
select Line 2 and have not subscribed to this network
service, you will not be able to make calls. When line 2 is
selected, 2 is shown in the standby mode.
Tip! To switch between the phone lines, press and
hold # in the standby mode.
Line change (network service)—To prevent line selection,
select Line change > Disable if supported by the SIM card.
To change this setting, you need the PIN2 code.
Connection settings
Data connections and access points
Your phone supports packet data connections ( ), such as
GPRS in the GSM network.
General packet radio service (GPRS) uses packet data
technology where information is sent in short packets of
data over the mobile network.
To establish a data connection, an access point is required.
You can define different kinds of access points:
• MMS access point to send and receive multimedia
messages
• Access point for the Web application to view WML or
XHTML pages
• Internet access point (IAP) to send and receive e-mail
Check the kind of an access point you need with your
service provider for the service you wish to access. For
availability and subscription to packet data connection
services, contact your network operator or service
provider.
Packet data connections in GSM networks
When you use your phone in GSM networks, multiple data
connections can be active at the same time, access points
can share a data connection, and data connections remain
active during voice calls. To check the active data
connections, see ‘Connection manager’, p. 85.
Tools
92
The following indicators may be displayed below the
signal indicator, depending on which network you use:
GSM network, packet data is available in the network.
GSM network, packet data connection is active, data is
being transferred.
GSM network, multiple packet data connections are
active.
GSM network, packet data connection is on hold. (This
can happen during a voice call, for example.)
Receive access point settings
You may receive access point settings in a text message
from a service provider, or you may have preset access
point settings in your phone. See ‘Data and settings’, p. 50.
To create a new access point, select Tools > Settings >
Connection > Access points.
An access point may be protected ( ) by your network
operator or service provider. Protected access points
cannot be edited or deleted.
Access points
Options in the Access points list are Edit, New
access point, Delete, Help, and Exit.
Follow the instructions given to you by your service
provider.
Connection name—Give a descriptive name for the
connection.
Data bearer—Depending on what data connection you
select, only certain setting fields are available. Fill in all
fields marked with Must be defined or with a red asterisk.
Other fields can be left empty, unless you have been
instructed otherwise by your service provider.
Options when editing access point settings are
Change, Advanced settings, Help, and Exit.
To be able to use a data connection, the network service
provider must support this feature, and if necessary,
activate it for your SIM card.
Access point name (for packet data only)—The access
point name is needed to establish a connection to the
packet data network. You obtain the access point name
from your network operator or service provider.
Tip! See also ‘Receive MMS and e-mail settings’, p.
49, ‘E-mail’, p. 56, and ‘Access the Web’, p. 63.
User name—The user name may be needed to make a data
connection, and is usually provided by the service provider.
The user name is often case-sensitive.
Prompt password—If you must enter a new password
every time you log in to a server, or if you do not want to
save your password in the phone, choose Yes.
Tools
93
Password—A password may be needed to make a data
connection, and is usually provided by the service provider.
The password is often case-sensitive.
Authentication—Select Normal or Secure.
Homepage—Depending on what you are setting up, write
the Web address or the address of the multimedia
messaging centre.
Select Options > Advanced settings to change the
following settings:
Network type—Select the Internet protocol type to use:
IPv4 settings or IPv6 settings.
Phone IP address—Enter the IP address of your phone.
Name servers—In Primary name server:, enter the IP address
of the primary DNS server. In Second. name server:, enter
the IP address of the secondary DNS server. Contact your
Internet service provider to obtain these addresses.
The domain name dervice (DNS) is an Internet service that
translates domain names such as www.nokia.com into IP
addresses such as 192.100.124.195.
Proxy serv. address—Define the address for the proxy
server.
Proxy port number—Enter the proxy port number.
Packet data
The packet data settings affect all access points using a
packet data connection.
Packet data conn.—If you select When available and you
are in a network that supports packet data, the phone
registers to the packet data network. Also, starting an
active packet data connection is quicker (for example, to
send and receive e-mail). If you select When needed, the
phone uses a packet data connection only if you start an
application or action that needs it. If there is no packet
data coverage and you select When available, the phone
periodically tries to establish a packet data connection.
Access point—The access point name is needed to use
your phone as a packet data modem to your computer.
Configurations
You may receive trusted server settings from your network
operator or service provider in a configuration message, or
the settings may be stored on your SIM or USIM card. You
can save these settings to your phone, view or delete them
in Configurations.
Date and time
See ‘Clock settings’, p. 12.
Tools
94
See also the language settings in "General," page 89.
Security
Phone and SIM
PIN code request—When active, the code is requested
each time the phone is switched on. Deactivating the
personal identification number (PIN) code request may
not be allowed by some SIM cards. See "Glossary of PIN
and lock codes," page 95.
PIN code, PIN2 code, and Lock code—You can change the
lock code, PIN code, and PIN2 code. These codes can only
include the numbers from 0 to 9. See "Glossary of PIN and
lock codes," page 95.
Avoid using access codes similar to the emergency
numbers to prevent accidental dialing of the emergency
number.
If you lock your phone or forget any of these codes,
contact your service provider.
Autolock period—You can set an autolock period, a time-
out after which the phone automatically locks and can be
used only if the correct lock code is entered. Enter a
number for the time-out in minutes, or select None to
turn off the autolock period.
To unlock the phone, enter the lock code.
Note: When the phone is locked, calls in offline
profile to certain emergency numbers programmed
into your phone are still possible.
Tip! To lock the phone manually, press the power
key. A list of commands opens. Select Lock phone.
Lock if SIM changed—You can set the phone to ask for the
lock code when an unknown SIM card is inserted into your
phone. The phone maintains a list of SIM cards that are
recognized as the owner’s cards.
Fixed dialling—You can restrict calls and text messages
from your phone to selected phone numbers, if supported
by your SIM card. You need the PIN2 code for this function.
To view the list of fixed dialing numbers, press the menu
key, and select Tools > Settings > Security > Phone and
SIM > Fixed dialling. To add new numbers to the fixed
dialing list, select Options > New contact or Add from
Contacts. When you use Fixed dialling, packet data
connections are not possible, except when sending text
messages over a packet data connection. In this case, the
message centre number and the recipient’s phone number
must be included on the fixed dialing list.
Options in the Fixed dialling view are Open, Call,
Activ. fixed dialling/Deact. fixed dialling, New
contact, Edit, Delete, Add to Contacts, Add from
Contacts, Find, Mark/Unmark, Help, and Exit.
Tools
95
Note: When security features that restrict calls are
in use (such as Call restriction, Closed user group,
and Fixed dialling) calls still may be possible to the
official emergency numbers programmed into your
phone.
Closed user group (network service)—You can specify a
group of people to whom you can call and who can call
you.
Confirm SIM services (network service)—You can set the
phone to display confirmation messages when you are
using a SIM card service.
Glossary of PIN and lock codes
Personal identification number (PIN) code—This code
protects your SIM card against unauthorized use. The PIN
code (4 to 8 digits) is usually supplied with the SIM card.
After three consecutive incorrect PIN code entries, the PIN
code is blocked, and you need to unblock it before you can
use the SIM card again. See the information about the PUK
code in this section.
UPIN code—This code may be supplied with the USIM card.
The USIM card is an enhanced version of the SIM card and
is supported by UMTS mobile phones. The UPIN code
protects the USIM card against unauthorized use.
PIN2 code—This code (4 to 8 digits) is supplied with some
SIM cards, and is required to access some functions in your
phone.
Lock code—This code (5 digits) can be used to lock the
phone to avoid unauthorized use. The factory setting for
the lock code is 12345. To avoid unauthorized use of your
phone, change the lock code. Keep the new code secret
and in a safe place separate from your phone.
Personal unblocking key (PUK) code and PUK2 code—These
codes (8 digits) are required to change a blocked PIN code
or PIN2 code, respectively. If the codes are not supplied
with the SIM card, contact the operator whose SIM card
is in your phone.
UPUK code—This code (8 digits) is required to change a
blocked UPIN code. If the code is not supplied with the
USIM card, contact the operator whose USIM card is in
your phone.
Wallet code—This code is required to use the wallet
services. See ‘Wallet’, p. 72.
Certificate management
Digital certificates do not guarantee safety; they are used
to verify the origin of software.
In the certificate management main view, you can see a
list of authority certificates that are stored in your phone.
Scroll right to see a list of personal certificates, if
available.
Tools
96
Options in the certificate management main view
are Certificate details, Delete, Trust settings,
Mark/Unmark, Help, and Exit.
Digital certificates are used to verify the origin of the
XHTML or WML pages and installed software. However,
they can only be trusted if the origin of the certificate is
known to be authentic.
Digital certificates should be used if you want to connect
to an online bank or another site or remote server for
actions that involve transferring confidential information.
They should also be used if you want to reduce the risk of
viruses or other malicious software and be sure of the
authenticity of software when downloading and installing
software.
Important: Even if the use of certificates makes
the risks involved in remote connections and
software installation considerably smaller, they
must be used correctly in order to benefit from
increased security. The existence of a certificate
does not offer any protection by itself; the
certificate manager must contain correct,
authentic, or trusted certificates for increased
security to be available. Certificates have a
restricted lifetime. If Expired certificate or
Certificate not valid yet is shown even if the
certificate should be valid, check that the current
date and time in your phone are correct.
View certificate details
You can only be sure of the correct identity of a server
when the signature and the period of validity of a server
certificate have been checked.
You are notified on the phone display if the identity of the
server is not authentic or if you do not have the correct
security certificate in your phone.
To check certificate details, scroll to a certificate, and
select Options > Certificate details. When you open
certificate details, the validity of the certificate is checked,
and one of the following notes may be displayed:
Certificate not trusted—You have not set any application
to use the certificate. See "Change the trust settings," page
96.
Expired certificate—The period of validity has ended for
the selected certificate.
Certificate not valid yet—The period of validity has not
yet begun for the selected certificate.
Certificate corrupted—The certificate cannot be used.
Contact the certificate issuer.
Change the trust settings
Before changing any certificate settings, you must make
sure that you really trust the owner of the certificate and
that the certificate really belongs to the listed owner.
Tools
97
Scroll to an authority certificate, and select Options >
Trust settings. Depending on the certificate, a list of the
applications that can use the selected certificate is shown.
For example:
Symbian installation: Yes—The certificate is able to certify
the origin of a new Symbian operating system application.
Internet: Yes—The certificate is able to certify servers.
App. installation: Yes—The certificate is able to certify the
origin of a new Java application.
Select Options > Edit trust setting to change the value.
Call diverting
Call forwarding allows you to divert your incoming calls
to your voice mailbox or another phone number. For
details, contact your service provider.
1Press Menu, and select Tools > Settings > Call
forwarding.
2Select the desired divert option. To divert voice calls
when your number is busy or when you reject
inncoming calls, select If busy.
3Set the divert option on (Activate) or off (Cancel), or
check whether the option is activated (Check status).
Several divert options can be active at the same time.
When all calls are diverted, is shown in the standby
mode.
Call barring and call diverting cannot be active at the
same time.
Call restriction
Call restriction (network service) allows you to restrict
the calls that you make or receive with the phone. To
change the settings, you need the barring password from
your service provider. Select the desired barring option,
and set it on (Activate) or off (Cancel), or check whether
the option is active (Check status). Call restriction
affects all calls, including data calls.
Call restriction and Call forwarding cannot be active at
the same time.
When calls are barred, calls still may be possible to certain
official emergency numbers.
Network
Operator selection—Select Automatic to set the phone
to search for and select one of the available networks, or
Tools
98
Manual to manually select the network from a list of
networks. If the connection to the manually selected
network is lost, the phone sounds an error tone and asks
you to reselect a network. The selected network must have
a roaming agreement with your home network, that is, the
operator whose SIM card is in your phone.
A roaming agreement is an agreement between two or
more network service providers to enable the users of one
service provider to use the services of other service
providers.
Cell info display—Select On to set the phone to indicate
when it is used in a cellular network based on
microcellular network (MCN) technology and to activate
cell info reception.
Enhancement settings
Indicators shown in the standby mode:
A headset, music stand or Bluetooth wireless
technology device is connected.
A loopset is connected.
A car kit with Bluetooth technology is connected.
The headset is unavailable, or a Bluetooth connection
to a headset is lost.
Select Headset, Car kit, Bluetooth handsfree or Loopset
and the following options are available:
Default profile—To set the profile that you want activated
each time you connect a certain enhancement to your
phone. See ‘Set tones’, p. 17.
Automatic answer—To set the phone to answer an
incoming call automatically after 5 seconds. If the Ringing
type is set to Beep once or Silent, automatic answer is
disabled.
Voice commands
You can use voice commands to add, delete, and control
your phone. You record voice commands in the same way
as voice tags. See ‘Add a voice tag’, p. 29.
Press the menu key, and select Tools > Voice com.
Add a voice command to an application
You can have only one voice command per application.
1Select the application to which you want to add a voice
command.
To add a new application to the list, select Options >
New application.
2Select Options > Add voice command. See ‘Add a
voice tag’, p. 29.
Tools
99
Application manager
Press the menu key, and select Tools > Manager. You can
install two types of applications and software to your
phone:
J2ME™ applications based on Java™ technology with the
extension JAD or JAR ( ). Do not download
PersonalJava™ applications to your phone, as they cannot
be installed.
For example, if you have received the installation file as an
e-mail attachment, go to your mailbox, open the e-mail,
open the attachments view, scroll to the installation file,
and press Scroll to start installation.
Other applications and software suitable for the Symbian
operating system ( ). The installation files have the SIS
extension. Only install software specifically designed for
your Nokia 6682 device.
Installation files may be transferred to your phone from a
compatible computer, downloaded during browsing, or
sent to you in a multimedia message, as an e-mail
attachment, or using a Bluetooth connection. You can use
Nokia Application Installer in Nokia PC Suite to install an
application to your phone or a memory card. If you use
Microsoft Windows Explorer to transfer a file, save the file
to a memory card (local disk).
Install applications and software
Application icons are as follows:
SIS application
Java application
Application is not fully installed
Application is installed on the memory card.
Important: Only install applications from sources
that offer adequate protection against harmful
software.
Before installation, do the following:
To view the application type, version number, and the
supplier or manufacturer of the application, select
Options > View details.
To display the security certificate details of the
application, select Options > View certificate. See
"Certificate management," page 95.
If you install a file that contains an update or repair to an
existing application, you can only restore the original
application if you have the original installation file or a
full back-up copy of the removed software package. To
restore the original application, remove the application,
and install the application again from the original
installation file or the backup copy.
Tools
100
Tip! You can also use Nokia Application Installer
available in Nokia PC Suite to install applications.
See the CD-ROM supplied with the phone.
The JAR file is required for installing Java applications. If
it is missing, the phone may ask you to download it. If
there is no access point defined for the application, you
are asked to select one. When you are downloading the
JAR file, you may need to enter a user name and password
to access the server. You obtain these from the supplier or
manufacturer of the application.
1Open Manager, and scroll to an installation file.
Alternatively, search the phone memory or the
memory card, select the application, and press the
scroll key to start the installation.
2Select Options > Install.
Tip! While browsing, you can download an
installation file and install it without closing the
connection.
During installation, the phone shows information
about the progress of the installation. If you are
installing an application without a digital signature or
certification, the phone displays a warning. Continue
installation only if you are sure of the origin and
contents of the application.
Options in the Manager main view are Install, App.
downloads, View details, Go to web address, View
certificate, Send, Remove, View log, Send log,
Update, Settings, Help, and Exit.
To start an installed application, scroll to it, and press the
scroll key.
To start a network connection and to view extra
information about the application, scroll to it, and select
Options > Go to web address, if available.
To see what software packages have been installed or
removed and when, select Options > View log.
To send your installation log to a help desk so that they can
see what has been installed or removed, select Options >
Send log > Via text message, Via multimedia, Via
Bluetooth, or Via e-mail (available only if the correct
e-mail settings are in place).
Remove applications and software
Scroll to a software package, and select Options >
Remove. Select Yes to confirm.
If you remove software, you can only reinstall it if you have
the original software package or a full backup of the
removed software package. If you remove a software
package, you may no longer be able to open documents
created with that software.
Tools
101
Note: If another software package depends on the
software package that you removed, the other
software package may stop working. Refer to the
documentation of the installed software package
for details.
Application settings
Software installation—Select the kind of software you
want installed: On, Signed only, or Off.
Online certif. check—Select to check the online certificates
before installing an application.
Default web address—Set the default address used when
checking online certificates.
Some Java applications may require a phone call, a
message to be sent, or a network connection to a specific
access point for downloading extra data or components. In
the Manager main view, scroll to an application, and select
Options > Suite settings to change settings related to
that specific application.
Activation keys—handle
copyright-protected files
Copyright protections may prevent some images, ringing
tones, and other content from being copied, modified,
transferred, or forwarded.
Press the menu key, and select Tools > Activation keys to
view the digital rights activation keys stored in your
phone.
• Valid keys ( ) are connected to one or more media
files.
• With expired keys ( ), you have no time to use the
media file, or the time period for using the file is
exceeded. To view the Expired activation keys, scroll
right.
• To buy more usage time or extend the usage period for
a media file, select an activation key, and Options >
Activate content. Activation keys cannot be updated
if Web service message reception is disabled. See ‘Web
service messages’, p. 58.
• To view which keys are not in use at the moment (Not
used), scroll right twice. Unused activation keys have
no media files connected to them saved in the phone.
• To view detailed information such as the validity status
and ability to send the file, select an activation key,
and press the scroll key.
Tools
102
Troubleshooting
103
Troubleshooting
Q&A
Bluetooth connectivity
Q: Why can’t I find my friend’s device?
A: Check that both devices have activated Bluetooth
connectivity.
Check that the distance between the two devices is not
over 32.8 feet (10 meters) and that there are no walls or
other obstructions between the devices.
Check that the other device is not in hidden mode.
Check that both devices are compatible.
Q: Why can’t I end a Bluetooth connection?
A: If another device is connected to your phone, you can either
end the connection using the other device or by
deactivating Bluetooth connectivity. Select Connect. >
Bluetooth > Off.
Multimedia messaging
Q: What should I do when the phone cannot receive a
multimedia message because the memory is full?
A: The amount of memory needed is indicated in the error
message: Not enough memory to retrieve message. Delete
some data first. To view the kind of data you have and the
amount of memory the different data groups consume,
select File manager > Options > Memory details.
Q: The note Retrieving message is shown briefly. What is
happening?
A: The phone is trying to retrieve a multimedia message from
the multimedia messaging center.
Check that the settings for multimedia messaging are
defined correctly and that there are no mistakes in phone
numbers or addresses. Select Messaging > Options >
Settings > Multimedia message.
Q: How can I end the data connection when the phone
repeatedly starts a data connection?
A: To stop the phone from making a data connection, select
Messaging and one of the following:
On receiving msg. > Defer retrieval—To have the
multimedia messaging center save the message to be
retrieved later. After this change, the phone still needs to
send information notes to the network. To retrieve the
message immediately, select Retr. immediately.
On receiving msg. > Reject message—To reject all incoming
multimedia messages. After this change, the phone needs
to send information notes to the network, and the
multimedia messaging center deletes multimedia
messages that are waiting to be sent to you.
Multimedia reception > Off—To ignore all incoming
multimedia messages. After this change, the phone does
not make any network connections related to multimedia
messaging.
Troubleshooting
104
Messaging
Q: Why can’t I select a contact?
A: The contact card does not have a phone number or an
e-mail address. Add the missing information to the
contact card in Contacts.
Camera
Q: Why do images look smudgy?
A: Check to see if the camera lens protection window is clean.
Calendar
Q: Why are the week numbers missing?
A: If you have changed the calendar settings so that the week
starts on a day other than Monday, the week numbers will
not be shown.
Browser services
Q: What do I do if the following message is displayed: No
valid access point defined. Define one in Web settings.?
A: Insert the correct browser settings. Contact your service
provider for instructions.
Log
Q: Why does the log appear empty?
A: You may have activated a filter, and no communication
events fitting that filter have been logged. To see all
events, select Connect. > Log > Options > Filter > All
communication.
Q: How do I delete my log information?
A: Select Connect. > Log > Options > Clear log or go to
Settings > Log duration > No log. These will permanently
erase the log contents, recent calls register, and message
delivery reports.
PC connectivity
Q: Why do I have problems in connecting the phone to my PC?
A: Make sure that Nokia PC Suite is installed and running on
your PC. See the User Guide for Nokia PC Suite on the CD-
ROM. For further information on how to use Nokia PC
Suite, see the help function on Nokia PC Suite or visit the
support pages at www.nokia.com.
Access codes
Q: What is my password for the lock, PIN, or PUK codes?
A: The default lock code is 12345. If you forget or lose the lock
code, contact your phone dealer.
If you forget or lose a PIN or PUK code, or if you have not
received such a code, contact your network service
provider.
For information about passwords, contact your access
point provider, for example, a commercial Internet service
provider (ISP), service provider, or network operator.
Application not responding
Q: How do I close an application that is not responding?
A: Open the application switching window by pressing and
holding the Menu key. Then scroll to the application, and
press the Clear key to close the application.
Troubleshooting
105
Phone display
Q: Why do missing, discolored, or bright dots appear on the
screen every time I turn on my phone?
A: This is a characteristic of this type of display. Some displays
may contain pixels or dots that remain on or off. This is
normal, not a fault.
Memory low
Q: What can I do if my phone memory is low?
A: You can delete the following items regularly to avoid
memory getting low:
Messages from Inbox, Drafts, and Sent folders in
Messaging
Retrieved e-mail messages from the phone memory
Saved browser pages
Images and photos in Gallery
To delete contact information, calendar notes, call timers,
call cost timers, game scores, or any other data, go to the
respective application to remove the data. Try deleting
items one by one (starting from the smallest item), if you
are deleting multiple items and any of the following notes
are shown: Not enough memory to perform operation.
Delete some data first. or Memory low. Delete some data..
Q: How can I save my data before deleting it?
A: Save your data using one of the following methods:
Use Nokia PC Suite to make a back up copy of all data to a
compatible computer.
Send images to your e-mail address, and then save the
images to your computer.
Send data using a Bluetooth connection to a compatible
device.
Store data on a compatible memory card.
Enhancements
106
Enhancements
If you want to enhance phone
functionality, a range of
enhancements is available for
you. You can select any of these
items to help accommodate
your specific communication
needs. For availability of these
and other enhancements,
contact your dealer. Protective carrying cases and straps for
your Nokia 6682 mobile phone are available for purchase and
can be located at www.nokiausa.com.
Check the model number of any charger before use with this
device. This device is intended for use when supplied with
power from ACP-7, ACP-8, ACP-9, and ACP-12.
Warning: Use only batteries, chargers and
enhancements approved by Nokia for use with
this particular model. The use of any other types
may invalidate any approval or warranty, and
may be dangerous. For availability of approved
enhancements, please check with your dealer.
Your device and its enhancements may contain small parts.
Keep them out of reach of small children.
A few practical rules about accessories and enhancements:
• Keep all accessories and enhancements out of the reach
of small children.
• When you disconnect the power cord of any accessory or
enhancement, grasp and pull the plug, not the cord.
• Check regularly that enhancements installed in a vehicle
are mounted and are operating properly.
• Installation of any complex car enhancements must be
made by qualified personnel only.
Power
• Battery, 900 mAh, Li-ion (BL-5C)
• Travel chargers (ACP-12, ACP-9, ACP-8, and ACP-7)
• Mobile charger (LCH-12)
Data
• Connectivity Cable (DKU-2)
• Wireless Keyboard (SU-8W)
• Digital Pen (SU-1B)
• Multimedia Card (RS)-MMC)
• Multimedia Card (MU-1)
Audio
• Wireless Boom Headset (HS-4W)
Enhancements
107
• Wireless Headset (HDW-3)
• Wireless Headset (HS-11W)
• Headset (HS-5)
•Boom Headset (HDB-4)
• Fashion Stereo Headset (HS-3)
• Stereo Headset (HDS-3)
• Music Stand (MD-1)
Accessibility
• Loopset (LPS-4)
• Phone adapter (HDA-10)
Car
• Wireless Plug-in Handsfree (HF-6W))
• Mobile Holder (CR-27)
• Wireless Car Kit (CK-1W, CK-7W)
Imaging and lifestyle
• Image Album (PD-1)
• Nokia Remote Camera (PT-6)
Care and maintenance
108
Care and maintenance
Your device is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will
help you protect your warranty coverage and enjoy your
device for many years.
• Keep the device dry. Precipitation, humidity, and all types
of liquids or moisture can contain minerals that will
corrode electronic circuits.
• Do not use or store the device in dusty, dirty areas. Its
moving parts and electronic components can be damaged.
• Do not store the device in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device
returns to its normal temperature, moisture can form
inside the device and damage electronic circuit boards.
• Do not attempt to open the device other than as
instructed in this guide.
• Do not drop, knock, or shake the device. Rough handling
can break internal circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device.
• Do not paint the device. Paint can clog the moving parts
and prevent proper operation.
• Use a soft, clean, dry cloth to clean any lenses (such as
camera, proximity sensor, and light sensor lenses).
All of the above suggestions apply equally to your device,
battery, charger, or any enhancement. If any device is not
working properly, take it to the nearest authorized service
facility for service.
Reference information
109
Reference information
Battery information
Charging and discharging Your device is powered by a
rechargeable battery. The full performance of a new battery is
achieved only after two or three complete charge and
discharge cycles. The battery can be charged and discharged
hundreds of times but it will eventually wear out. When the
talk and standby times are noticeably shorter than normal, buy
a new battery. Use only Nokia approved batteries, and
recharge your battery only with Nokia approved chargers
designated for this device.
Unplug the charger from the electrical plug and the device
when not in use. Do not leave the battery connected to a
charger. Overcharging may shorten its lifetime. If left unused,
a fully charged battery will lose its charge over time.
Temperature extremes can affect the ability of your battery to
charge.
Use the battery only for its intended purpose. Never use any
charger or battery that is damaged.
Do not short-circuit the battery. Accidental short-circuiting
can occur when a metallic object such as a coin, clip, or pen
causes direct connection of the positive (+) and negative (-)
terminals of the battery. (These look like metal strips on the
battery.) This might happen, for example, when you carry a
spare battery in your pocket or purse. Short-circuiting the
terminals may damage the battery or the connecting object.
Leaving the battery in hot or cold places, such as in a closed
car in summer or winter conditions, will reduce the capacity
and lifetime of the battery. Always try to keep the battery
between 59°F and 77°F (15°C and 25°C). A device with a hot
or cold battery may not work temporarily, even when the
battery is fully charged. Battery performance is particularly
limited in temperatures well below freezing.
Do not dispose of batteries in a fire! Dispose of batteries
according to local regulations. Please recycle when possible.
Do not dispose as household waste.
Operating environment
Remember to follow any special regulations in force in any
area and always switch off your device when its use is
prohibited or when it may cause interference or danger. Use
the device only in its normal operating positions. This device
meets RF exposure guidelines when used either in the normal
use position against the ear or when positioned at least 7/8
inch (2.2 cm) away from the body. When a carry case, belt clip,
or holder is used for body-worn operation, it should not
contain metal and should position the device at least 7/8 inch
(2.2 cm) away from your body.
In order to transmit data files or messages, this device
requires a quality connection to the network. In some cases,
transmission of data files or messages may be delayed until
such a connection is available. Ensure the above separation
Reference information
110
distance instructions are followed until the transmission is
completed.
Your device and its enhancements may contain small parts.
Keep them out of reach of small children.
Medical devices
Operation of any radio transmitting equipment, including
wireless phones, may interfere with the functionality of
inadequately protected medical devices. Consult a physician
or the manufacturer of the medical device to determine if
they are adequately shielded from external RF energy or if you
have any questions. Switch off your phone in health care
facilities when any regulations posted in these areas instruct
you to do so. Hospitals or health care facilities may be using
equipment that could be sensitive to external RF energy.
Pacemakers
Pacemaker manufacturers recommend that a minimum
separation of 6 inches (15.3 cm) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations are
consistent with the independent research by and
recommendations of Wireless Technology Research. To
minimize the potential for interference, persons with
pacemakers should
• Always keep the device more than 6 inches (15.3 cm)
from their pacemaker when the device is switched on
• Not carry the device in a breast pocket
• Hold the device to the ear opposite the pacemaker
If you have any reason to suspect that interference is taking
place, switch off your device immediately.
Hearing aids
Some digital wireless devices may interfere with some hearing
aids. If interference occurs, consult your hearing aid provider.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles such as
electronic fuel injection systems, electronic antiskid (antilock)
braking systems, electronic speed control systems, air bag
systems. For more information, check with the manufacturer
or its representative of your vehicle or any equipment that has
been added.
Only qualified personnel should service the device, or install
the device in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty that may apply to
the device. Check regularly that all wireless device equipment
in your vehicle is mounted and operating properly. Do not store
or carry flammable liquids, gases, or explosive materials in the
same compartment as the device, its parts, or enhancements.
For vehicles equipped with an air bag, remember that air bags
inflate with great force. Do not place objects, including
installed or portable wireless equipment in the area over the
air bag or in the air bag deployment area. If in-vehicle wireless
equipment is improperly installed and the air bag inflates,
serious injury could result.
Reference information
111
FCC regulations prohibit using your wireless device while in
the air. The use of wireless telephones in an aircraft may be
dangerous to the operation of the aircraft, disrupt the wireless
telephone network, and may be illegal.
Failure to observe these instructions may lead to suspension or
denial of telephone services to the offender, legal action, or
both.
Potentially explosive environments
Switch off your device when in any area with a potentially
explosive atmosphere and obey all signs and instructions.
Potentially explosive atmospheres include areas where you
would normally be advised to turn off your vehicle engine.
Sparks in such areas could cause an explosion or fire resulting
in bodily injury or even death. Switch off the device at
refuelling points such as near gas pumps at service stations.
Observe restrictions on the use of radio equipment in fuel
depots, storage, and distribution areas, chemical plants or
where blasting operations are in progress. Areas with a
potentially explosive atmosphere are often but not always
clearly marked. They include below deck on boats, chemical
transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), and areas where
the air contains chemicals or particles such as grain, dust or
metal powders.
Emergency calls
Important: Wireless phones, including this phone,
operate using radio signals, wireless networks,
landline networks, and user-programmed functions.
Because of this, connections in all conditions cannot
be guaranteed. You should never rely solely on any
wireless phone for essential communications like
medical emergencies.
To make an emergency call, do the following:
1If the phone is not on, switch it on. Check for adequate
signal strength. Some networks may require that a valid
SIM card is properly inserted in the phone.
2Press End as many times as needed to clear the display and
ready the phone for calls.
3Enter the official emergency number for your present
location. Emergency numbers vary by location.
4Press Call.
If certain features are in use, you may first need to turn those
features off before you can make an emergency call. Consult
this guide or your service provider. When making an
emergency call, give all the necessary information as
accurately as possible. Your wireless phone may be the only
means of communication at the scene of an accident. Do not
end the call until given permission to do so.
Reference information
112
Certification information (SAR)
THE NOKIA 6682 DEVICE MEETS GUIDELINES FOR EXPOSURE
TO RADIO WAVES.
Your mobile device is a radio transmitter and receiver. It is
designed and manufactured not to exceed the limits for
exposure to radio frequency (RF) energy recommended by
international guidelines (ICNIRP). These limits establish
permitted levels of RF energy for the general population. The
guidelines are based on standards that were developed by
independent scientific organizations through periodic and
thorough evaluation of scientific studies. The standards and
guidelines include a substantial safety margin designed to
assure the safety of the public, regardless of age and health
and to account for any variations in measurements.
The exposure guidelines for mobile devices employ a unit of
measurement known as the Specific Absorption Rate or SAR.
The SAR limit stated in the international guidelines is 2.0
watts/kilogram (W/kg) averaged over ten grams of tissue.
Tests for SAR are conducted using standard operating
positions with the device transmitting at its highest certified
power level in all tested frequency bands. The actual SAR level
of an operating device can be well below the maximum value
because the device is designed to use only the power required
to reach the network. That amount changes depending on a
number of factors such as how close you are to a network
base station. The highest SAR value when tested according to
international testing procedures for use at the ear for device
type RM-58 is 0.52 W/kg. Your phone’s device type is listed
on the label located under the battery.
SAR values may vary depending on national reporting and
testing requirements and the network band. Use of device
accessories and enhancements may result in different SAR
values. Additional SAR information may be provided under
product information at www.nokia.com.
USA and Canada: The SAR limit of USA (FCC) and Canada (IC)
is 1.6 W/kg averaged over one gram of tissue. Device type RM-
58 has also been tested against this SAR limit. The highest SAR
value reported under this standard during product
certification for use at the ear is 0.82 W/kg and when properly
worn on the body is 0.96 W/kg. Information about these
devices can be found on the FCC's website at <http://
www.fcc.gov/oet/fccid> by searching the equipment
authorization system using FCC ID: LJPRM-58.