Microsoft RM-421 GSM/WCDMA Cellular Phone w/BT and WLAN User Manual Manual

Microsoft Mobile Oy GSM/WCDMA Cellular Phone w/BT and WLAN Manual

Contents

Manual

Nokia N95 8GB User GuideIssue 1
DECLARATION OF CONFORMITYHereby, NOKIA CORPORATION declares that this RM-421 product is in compliance with the essential requirementsand other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/.© 2007 Nokia. All rights reserved.Nokia, Nokia Connecting People, Nseries, N95, N-Gage, Visual Radio, and Nokia Care are trademarks or registered trademarks of Nokia Corporation.Nokia tune is a sound mark of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of theirrespective owners.Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokiais prohibited.This product includes software licensed from Symbian Software Ltd © 1998-2007. Symbian and Symbian OS are trademarks of SymbianLtd.US Patent No 5818437 and other pending patents. T9 text input software Copyright © 1997-2007. Tegic Communications, Inc. All rights reserved.Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.Portions of the Nokia Maps software are copyright © 1996-2002 The FreeType Project. All rights reserved.This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information whichhas been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use inconnection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information,including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See http://www.mpegla.com..Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in thisdocument without prior notice.TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANYLOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS ORIMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATIONTO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIMEWITHOUT PRIOR NOTICE.
The third-party applications provided with your device may have been created and may be owned by persons or entities not affiliated with or relatedto Nokia. Nokia does not own the copyrights or intellectual property rights to the third-party applications. As such, Nokia does not take any responsibilityfor end-user support, functionality of the applications, or the information in the applications or these materials. Nokia does not provide any warrantyfor the third-party applications.BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, TOTHE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. YOU FURTHER ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY REPRESENTATIONSOR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,OR THAT THE APPLICATIONS WILL NOT INFRINGE ANY THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS.The availability of particular products and applications and services for these products may vary by region. Please check with your Nokia dealer fordetails, and availability of language options.Export controlsThis device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversioncontrary to law is prohibited.FCC/INDUSTRY CANADA NOTICEYour device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment).The FCC or IndustryCanada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local servicefacility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmfulinterference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes ormodifications not expressly approved by Nokia could void the user's authority to operate this equipment./Issue 1
ContentsFor your safety ..........................................10About your device.........................................................11Network services...........................................................12Enhancements, batteries, and chargers.....................12Get connected............................................14Useful information.....................................15Help.................................................................................15Get started.....................................................................15Additional applications................................................15Software updates..........................................................15Settings..........................................................................16Access codes..................................................................16Prolong battery life.......................................................17Free memory.................................................................18Your device.................................................19Welcome........................................................................19Switch.............................................................................19Transfer content.........................................................19Synchronise, retrieve, or send content....................20Display indicators..........................................................21Volume and loudspeaker control................................22Lock the keypad............................................................22Offline profile.................................................................23Games.............................................................................23Multimedia menu..........................................................24Fast downloading.........................................................24Web browser..............................................26Browse the web............................................................26Browser toolbar............................................................27Navigate pages..............................................................28Web feeds and blogs....................................................28Widgets..........................................................................28Content search...............................................................29Download and purchase items....................................29Bookmarks.....................................................................29Empty the cache............................................................30End the connection.......................................................30Connection security......................................................31Web settings..................................................................31Connections................................................33Wireless LAN..................................................................33About WLAN................................................................33WLAN connections......................................................33WLAN wizard...............................................................34WLAN internet access points.....................................34Operating modes........................................................35Connection manager....................................................35Active data connections.............................................35Available WLAN networks..........................................35Bluetooth connectivity.................................................36About Bluetooth connectivity...................................36Settings.......................................................................36Security tips................................................................37Send data using Bluetooth connectivity..................37Pair devices.................................................................38Contents
Receive data using Bluetooth connectivity.............38Remote SIM mode......................................................39Infrared..........................................................................39USB..................................................................................40PC connections..............................................................40Nokia Wireless Keyboard..............................................40Modem...........................................................................41Nokia Video Centre.....................................42Find and view videos....................................................42Internet videos..............................................................43Play downloaded videos..............................................43Transfer videos from your PC.......................................43Settings..........................................................................44Music folder................................................45Music player...................................................................45Play a song or a podcast episode.............................45Music menu.................................................................46Playlists.......................................................................46Podcasts......................................................................47Home network with music player............................47Transfer music to your device...................................48Transfer music from PC...........................................48Transfer with Windows Media Player....................49Nokia Music Store..........................................................50Radio..............................................................................50Listen to the radio......................................................50View visual content....................................................51Saved stations.............................................................51Settings.......................................................................51Nokia Podcasting..........................................................52Settings.......................................................................52Search..........................................................................53Directories...................................................................53Downloads..................................................................54Play and manage podcasts........................................54Media folder...............................................56RealPlayer .....................................................................56Play video clips...........................................................56Stream content over the air......................................56RealPlayer settings.....................................................56Adobe Flash Player........................................................57Nokia Lifeblog...............................................................57About Nokia Lifeblog.................................................57Installation on your PC...............................................58Connect your device and PC......................................58Copy items...................................................................58Browse time line and favourites..............................59Post to web.................................................................59Import items...............................................................60Activation keys..............................................................60Recorder.........................................................................61Camera.......................................................62About the camera.........................................................62Image capture...............................................................62Still image camera indicators...................................62Active toolbar.............................................................63Take pictures..............................................................64After taking a picture.................................................65Flash.............................................................................66Scenes..........................................................................66Take pictures in a sequence......................................66You in the picture—self-timer..................................67Tips on taking good photographs............................67Video recording.............................................................68Contents
Video capture indicators...........................................68Record videos.............................................................69After recording a video..............................................69Camera settings.............................................................70Still image camera settings.......................................70Setup settings—adjust colour and lighting............71Video settings.............................................................72Gallery........................................................73View and organise files................................................73Images and video clips.................................................73View images and videos............................................73Organise images and videos.....................................74Active toolbar.............................................................74Albums.........................................................................75Print basket.................................................................75Slide show...................................................................76Edit images....................................................................76Image editor...............................................................76Crop image..................................................................76Reduce red-eye...........................................................77Useful shortcuts..........................................................77Edit videos.....................................................................77TV-out mode..................................................................77Presentations................................................................78Print images..................................................................79Image print.................................................................79Printer selection......................................................79Print preview...........................................................79Print settings............................................................79Print online.................................................................79Share images and videos online..................................80Home network...............................................................80About home network.................................................80Important security information................................81Settings for home network.......................................81Set sharing on and define content...........................82View and share media files.......................................82Copy media files.........................................................83Positioning (GPS)........................................85About GPS.......................................................................85GPS receiver...................................................................86About satellite signals..................................................86Position requests..........................................................87Maps...............................................................................87About Maps.................................................................87Browse maps..............................................................88Download maps..........................................................89Find a place.................................................................90Plan a route.................................................................91Extra services for Maps..............................................91Navigation................................................................91Guides.......................................................................92Landmarks.....................................................................92GPS data.........................................................................93Route guidance..........................................................94Retrieve position information..................................94Trip meter...................................................................94Personalise your device.............................95Themes...........................................................................95Profiles—set tones........................................................953-D tones........................................................................96Modify the standby mode............................................97Modify the main menu.................................................97Time management.....................................98Contents
Clock ..............................................................................98Alarm clock..................................................................98World clock.................................................................98Calendar.........................................................................99Create a calendar entry..............................................99Calendar views............................................................99Manage calendar entries.........................................100Messaging................................................101Messaging main view.................................................101Write text.....................................................................102Traditional text input..............................................102Predictive text input................................................102Tips on text input.....................................................103Change the writing language.................................103Edit text and lists......................................................103Write and send messages..........................................103Messaging inbox.........................................................105Receive messages....................................................105Multimedia messages..............................................106Data, settings, and web service messages............106Mailbox.........................................................................106Define the e-mail settings.......................................106Open the mailbox.....................................................107Retrieve e-mail messages.......................................107Delete e-mail messages...........................................108Disconnect from the mailbox..................................108View messages on a SIM card....................................108Messaging settings.....................................................108Text message settings.............................................109Multimedia message settings.................................109E-mail settings..........................................................110Manage mailboxes................................................110Connection settings..............................................110User settings..........................................................111Retrieval settings..................................................111Automatic retrieval settings................................112Web service message settings................................112Cell broadcast settings.............................................112Other settings...........................................................113Make calls.................................................114Voice calls....................................................................114Options during a call...................................................114Voice and video mailboxes........................................115Answer or decline a call.............................................115Make a conference call...............................................1151-touch dial a phone number....................................116Call waiting..................................................................116Voice dialling...............................................................116Make a video call.........................................................117Options during a video call........................................118Answer or decline a video call...................................118Video sharing..............................................................119Requirements...........................................................119Settings.....................................................................119Share live video or video clips................................120Accept an invitation.................................................121Internet calls................................................................121Create an internet call profile.................................122Connect to the internet call service........................122Make internet calls ..................................................123Service settings........................................................123Log................................................................................124Recent calls...............................................................124Call duration.............................................................124Packet data...............................................................124Monitor all communication events........................124Contents
Contacts (phonebook)..............................126Save and edit names and numbers...........................126Manage names and numbers....................................126Default numbers and addresses................................127Add ringing tones for contacts..................................127Copy contacts..............................................................127SIM directory and other SIM services........................128Manage contact groups..............................................128Office folder..............................................130Quickoffice...................................................................130Quickword.................................................................130Quicksheet................................................................130Quickpoint.................................................................130Quickmanager..........................................................131Notes............................................................................131Adobe PDF reader........................................................131Converter.....................................................................131Zip manager................................................................132Barcode reader............................................................132Applications folder...................................134Calculator.....................................................................134Application manager..................................................134Install applications and software ..........................135Remove applications and software........................136Settings.....................................................................136Tools folder..............................................138File manager................................................................138Mass memory tool.......................................................138Voice commands.........................................................139Sync..............................................................................139Device manager..........................................................140Settings....................................................141General settings..........................................................141Personalisation settings..........................................141Enhancement settings.............................................142Security settings.......................................................143Phone and SIM.......................................................143Certificate management.......................................144Security module.....................................................145Restore original settings.........................................145Positioning settings.................................................145Phone settings............................................................146Call settings...............................................................146Call divert..................................................................147Call barring................................................................147Network settings......................................................147Connection settings....................................................148Data connections and access points......................148Access points............................................................149Create a new access point....................................149Packet data access points.....................................149WLAN internet access points................................150Packet data settings................................................151Wireless LAN settings..............................................152SIP settings...............................................................152Internet call settings................................................152Configurations..........................................................152Access point name control......................................152Application settings....................................................153Troubleshooting......................................154Battery information.................................158Charging and discharging..........................................158Nokia battery authentication guidelines.................159Contents
Authenticate hologram...........................................159What if your battery is not authentic?...................159Care and maintenance.............................161Disposal........................................................................162Additional safety information.................163Small children..............................................................163Operating environment..............................................163Medical devices...........................................................163Implanted medical devices.....................................163Hearing aids..............................................................164Vehicles........................................................................164Potentially explosive environments.........................165Emergency calls...........................................................165Certification information (SAR)..................................166Index........................................................167Contents
For your safetyRead these simple guidelines. Not following themmay be dangerous or illegal. Read the complete userguide for further information.SWITCH ON SAFELYDo not switch the device on when wirelessphone use is prohibited or when it maycause interference or danger.ROAD SAFETY COMES FIRSTObey all local laws. Always keep your handsfree to operate the vehicle while driving.Your first consideration while driving shouldbe road safety.INTERFERENCEAll wireless devices may be susceptible tointerference, which could affectperformance.SWITCH OFF IN HOSPITALSFollow any restrictions. Switch the device offnear medical equipment.SWITCH OFF IN AIRCRAFTFollow any restrictions. Wireless devices cancause interference in aircraft.SWITCH OFF WHEN REFUELINGDo not use the device at a refueling point. Donot use near fuel or chemicals.SWITCH OFF NEAR BLASTINGFollow any restrictions. Do not use thedevice where blasting is in progress.USE SENSIBLYUse only in the positions as explained in theproduct documentation. Do not touch theantenna areas unnecessarily.QUALIFIED SERVICEOnly qualified personnel may install orrepair this product.ENHANCEMENTS AND BATTERIESUse only approved enhancements andbatteries. Do not connect incompatibleproducts.WATER-RESISTANCEYour device is not water-resistant. Keep itdry.10For your safety
BACK-UP COPIESRemember to make back-up copies or keepa written record of all important informationstored in your device.CONNECTING TO OTHER DEVICESWhen connecting to any other device, readits user guide for detailed safetyinstructions. Do not connect incompatibleproducts.EMERGENCY CALLSEnsure the phone function of the device isswitched on and in service. Press the end keyas many times as needed to clear the displayand return to the standby mode. Enter theemergency number, then press the call key.Give your location. Do not end the call untilgiven permission to do so.About your deviceThe wireless device described in this guide is approvedfor use on the (E)GSM 850, 900, 1800, 1900 MHz, andWCDMA (HSDPA) 850 and 1900 MHz networks. Contactyour service provider for more information aboutnetworks.When using the features in this device, obey all lawsand respect local customs, privacy and legitimaterights of others, including copyrights.Not all networks support all features offered in thisdevice. For instance, video calls, video sharing, push-to-talk, and instant messaging are not compatible withthe networks in the United States of America.Copyright protections may prevent some images,music (including ringing tones), and other contentfrom being copied, modified, transferred, orforwarded.Your device supports internet connections and othermethods of connectivity. Like computers, your devicemay be exposed to viruses, malicious messages andapplications, and other harmful content. Exercisecaution and open messages, accept connectivityrequests, download content, and accept installationsonly from trustworthy sources. To increase the securityof your devices, consider installing, using, andregularly updating antivirus software, firewall, andother related software on your device and anyconnected computer.Warning: To use any features in this device,other than the alarm clock, the device must beswitched on. Do not switch the device on whenwireless device use may cause interference or danger.The office applications support common features ofMicrosoft Word, PowerPoint, and Excel (Microsoft Office2000, XP, and 2003). Not all file formats can be viewedor modified.11For your safety
During extended operation, such as an active videosharing session or high-speed data connection, thedevice may feel warm. In most cases, this condition isnormal. If you suspect the device is not workingproperly, take it to the nearest authorized servicefacility.Your device may have preinstalled bookmarks and linksfor third-party internet sites. You may also access otherthird-party sites through your device. Third-party sitesare not affiliated with Nokia, and Nokia does notendorse or assume liability for them. If you choose toaccess such sites, you should take precautions forsecurity or content.The images in this guide may differ from your devicedisplay.Network servicesTo use the phone you must have service from a wirelessservice provider. Many of the features require specialnetwork features. These features are not available onall networks; other networks may require that youmake specific arrangements with your service providerbefore you can use the network services. Your serviceprovider can give you instructions and explain whatcharges will apply. Some networks may havelimitations that affect how you can use networkservices. For instance, some networks may not supportall language-dependent characters and services.Your service provider may have requested that certainfeatures be disabled or not activated in your device. Ifso, these features will not appear on your device menu.Your device may also have a special configuration suchas changes in menu names, menu order, and icons.Contact your service provider for more information.This device supports WAP 2.0 protocols (HTTP and SSL)that run on TCP/IP protocols. Some features of thisdevice, such as MMS, browsing, and e-mail requirenetwork support for these technologies.Enhancements, batteries,and chargersAlways switch the device off and disconnect thecharger before removing the battery.Check the model number of any charger before usewith this device. This device is intended for use whensupplied with power from the DC-4, AC-4, or AC-5charger and from an AC-1, ACP-8, ACP-9, ACP-12, orLCH-12 charger when used with the CA-44 chargeradapter.The battery intended for use with this device is BL-6F.Warning: Use only batteries, chargers, andenhancements approved by Nokia for use with thisparticular model. The use of any other types may12For your safety
invalidate any approval or warranty, and may bedangerous.For availability of approved enhancements, pleasecheck with your dealer. When you disconnect thepower cord of any enhancement, grasp and pull theplug, not the cord.13For your safety
Get connectedNokia N95 8GB supports the following connectivitymethods:●2G and 3G networks●Bluetooth connectivity — to transfer files andconnect to compatible enhancements. See"Bluetooth connectivity", p. 36.●Nokia AV connector (3.5 mm) — to connect tocompatible headsets, headphones, TVs , or homestereo sets. See "TV-out mode", p. 77.●Data cable — to connect to compatible devices,such as printers and PCs. See "USB", p. 40.●Wireless LAN (WLAN) — to connect to the internetand WLAN enabled devices. See "WirelessLAN", p. 33.●Infrared — to transfer and synchronise databetween compatible devices. See "Infrared", p. 39.●GPS — to connect to GPS satellites to measureyour location. See "Positioning (GPS)", p. 85.14Get connected
Useful informationModel number: N95-4Hereinafter referred to as Nokia N95 8GB.For local services and warranty information, pleaserefer to the separate booklet.HelpYour device has context-sensitive help. When anapplication is open, select Options > Help toaccess help for the current view.When you are reading the instructions, to switchbetween help and the application that is open in thebackground, press and hold .To open help from the main menu, select Tools >Utilities > Help. Select the desired application toview its help topics.Get startedSee the get started guide for keys and partsinformation, instructions for setting up the deviceand for other essential information.Additional applicationsThere are various applications provided by Nokiaand different third-party software developers thathelp you do more with your device. Theseapplications are explained in the guides that areavailable on the product support pages of the Nokiawebsite.Software updatesNokia may produce software updates that may offernew features, enhanced functions, or improvedperformance. You may be able to request theseupdates through the Nokia Software Updater PCapplication. To update the device software, youneed the Nokia Software Updater application and acompatible PC with Microsoft Windows 2000, XP, orVista operating system, broadband internet access,and a compatible data cable to connect your deviceto the PC.To get more information and to download the NokiaSoftware Updater application, visitwww.nokiausa.com/softwareupdate in the United15Useful information
States or www.latinoamerica.nokia.com/nsu inLatin America.Tip: To check the software version in yourdevice, enter *#0000# in the standby mode.SettingsYour device normally has MMS, GPRS, streaming, andmobile internet settings automatically configuredin the device, based upon your network serviceprovider information. You may have settings fromyour service providers already installed in yourdevice, or you may receive or request the settingsfrom the network service providers as a specialmessage.You can change the general settings in your device,such as language, standby mode, display, andkeypad lock settings. See "Generalsettings", p. 141.Access codesIf you forget any of the access codes, contact yourservice provider.●Personal identification number (PIN) code — Thiscode protects your SIM card againstunauthorised use. The PIN code (4 to 8 digits) isusually supplied with the SIM card. After threeconsecutive incorrect PIN code entries, the codeis blocked, and you need the PUK code to unblockit.●UPIN code — This code may be supplied with theUSIM card. The USIM card is an enhanced versionof the SIM card and is supported by UMTS mobilephones.●PIN2 code — This code (4 to 8 digits) is suppliedwith some SIM cards, and is required to accesssome functions in your device.●Lock code (also known as security code) — Thiscode (5 digits) can be used to lock the device toavoid unauthorised use. The factory setting forthe lock code is 12345. To avoid unauthoriseduse of your device, change the lock code. Keepthe new code secret and in a safe place separatefrom your device. Try entering the code onlyonce, if you forget the code. If the code youentered is not correct, contact a Nokia Care pointor your service provider for further instructions.●Personal unblocking key (PUK) code and PUK2code — These codes (8 digits) are required tochange a blocked PIN code or PIN2 code,respectively. If the codes are not supplied withthe SIM card, contact the operator whose SIMcard is in your device.●UPUK code — This code (8 digits) is required tochange a blocked UPIN code. If the code is notsupplied with the USIM card, contact the operatorwhose USIM card is in your device.16Useful information
Prolong battery lifeMany features in your device increase the demandon battery power and reduce the battery life time.To save battery power, note the following:●Features that use Bluetooth technology, orallowing such features to run in the backgroundwhile using other features, increase the demandon battery power. To prolong the operating timeof your device, turn the Bluetooth technology offwhen you do not need it.●Features that use wireless LAN (WLAN), orallowing such features to run in the backgroundwhile using other features, increase the demandon battery power. WLAN on your Nokia deviceswitches off when you are not trying to connect,not connected to another access point, or notscanning for available networks. To furtherreduce battery consumption, you can specify thatyour device does not scan, or scans less often, foravailable networks in the background. WLANswitches off in between background scans. See"Wireless LAN", p. 33. When Scan fornetworks is set to Never, the WLAN availabilityicon is not shown in the standby mode. However,you can still manually scan for available WLANnetworks and connect to WLAN networks asusual.●If you have set Packet data connection toWhen available in connection settings, andthere is no packet data coverage (GPRS), thedevice periodically tries to establish a packetdata connection, which causes increaseddemand on battery power. To prolong theoperating time of your device, select Packetdata connection > When needed.●The Maps application downloads new mapinformation when you scroll to new areas on themap, which increases the demand on batterypower. You can prevent the device fromautomatically downloading new maps. See"Maps", p. 87.●If the signal strength of the cellular networkvaries much in your area, your device must scanfor the available network repeatedly. Thisincreases the demand on battery power.If the network mode is set to dual mode in thenetwork settings, the device searches for theUMTS network. If it is not available, the deviceuses the available GSM network. To only use theGSM network, press , and select Tools >Settings > Phone > Network > Networkmode > GSM.●The backlight of the display increases thedemand on battery power. To change the time-out after which the backlight is switched off,press , and select Tools > Settings >17Useful information
General > Personalization > Display >Light time-out. To adjust the light sensor thatobserves the lighting conditions and adjusts thebrightness of the display, in the display settings,select Light sensor.●Leaving applications running in the backgroundincreases the demand on battery power. To closethe applications you do not use, press and hold, scroll to an application in the list, and pressC.Pressing C does not close Music player. To closeMusic player, select it from the list and Options >Exit.Free memoryMany features of the device use memory to storedata. The device notifies you if the device memoryis low.To view the types of data you have in the device andhow much memory the different data typesconsume, press , and select Tools > File mgr. >Options > Memory details. The amount ofavailable memory is shown in Free memory.To free device memory, transfer data to acompatible PC.To remove data to free memory, use File managerto delete files you no longer need, or go to therespective application. You can remove thefollowing:●Messages in the folders in Messaging andretrieved e-mail messages from the mailbox●Saved web pages●Contact information●Calendar notes●Applications shown in Application manager thatyou do not need●Installation files (.sis or .sisx) of applications youhave installed to your device.●Images and video clips in Gallery. Back up the filesto a compatible PC using Nokia Nseries PC Suite.If you are deleting multiple items and one of thefollowing notes is shown, delete items, one by one,beginning with the smallest item:●Not enough memory to perform operation.Delete some data first.●Memory low. Delete some data from phonememory.18Useful information
Your deviceWelcomeWhen you switch on your device, the Welcomeapplication is displayed.Select from the following:●Sett. wizard — to configure various settings,such as e-mail. For more information on theSettings wizard application, see the guidesavailable at the Nokia product support pages oryour local Nokia website.●Switch — to transfer content, such as contactsand calendar entries, from a compatible Nokiadevice. See "Transfer content", p. 19.There may also be a demonstration about yourdevice available in the Welcome application.To access the Welcome application later, press ,and select Tools > Utilities > Welcome. You canalso access the individual applications from theirmenu locations.SwitchTransfer contentWith the Switch application, you can transfercontent, such as contacts, between two compatibleNokia devices using Bluetooth connectivity orinfrared.The type of content that can be transferred dependson the model of the device from which you want totransfer content. If the other device supportssynchronisation, you can also synchronise databetween the other device and your device. Yourdevice notifies you if the other device is notcompatible.If the other device cannot be powered on withouta SIM card, you can insert your SIM card in it. Whenyour device is switched on without a SIM card, theoffline profile is automatically activated.Transfer content1. To retrieve data from the other device for thefirst time, on your device, select Switch in theWelcome application, or press , and selectTools > Utilities > Switch.19Your device
2. Select the connection type you want to use totransfer the data. Both devices must support theselected connection type.3. If you select Bluetooth connectivity: To haveyour device search for devices with Bluetoothconnectivity, select Continue. Select the devicefrom which you want to transfer content. Youare asked to enter a code on your device. Entera code (1-16 digits), and select OK. Enter thesame code on the other device, and select OK.The devices are now paired. See "Pairdevices", p. 38.For some device models, the Switch applicationis sent to the other device as a message. Toinstall the Switch application on the otherdevice, open the message, and follow theinstructions on the display.If you select infrared, connect the two devices.See " Infrared", p. 39.4. From your device, select the content you want totransfer from the other device.Once the transfer has started, you can cancel itand continue later.Transferring time depends on the amount of datato be transferred.Content is transferred from the memory of the otherdevice to the corresponding location in your device.Synchronise, retrieve, or sendcontentAfter the first transfer, select from the following tostart a new transfer, depending on the model of theother device: to synchronise content between your deviceand the other device, if the other device supportssynchronisation. The synchronisation is two-way. Ifan item is deleted in one device, it is deleted in both.You cannot restore deleted items withsynchronisation. to retrieve data from the other device to yourdevice. With retrieval, data is transferred from theother device to your device. You may be asked tokeep or delete the original data in the other device,depending on the device model. to send data from your device to your otherdeviceIf Switch cannot transfer an item, depending on thetype of the other device, you can add the item to theNokia folder to C:\Data\Nokia or E:\Data\Nokiaand transfer it from there. When you select thefolder to transfer, the items are synchronised in thecorresponding folder in the other device, and viceversa.20Your device
Use shortcuts to repeat a transferAfter a data transfer, you can save a shortcut withthe transfer settings to the main view to repeat thesame transfer later.To edit the shortcut, scroll to it, and selectOptions > Shortcut settings. You can, forexample, create or change the name of the shortcut.A transfer log is shown after every transfer. To viewthe log of a previous transfer, scroll to a shortcut inthe main view, and select Options > View log.Handle transfer conflictsIf an item to be transferred has been edited in bothdevices, the device attempts to merge the changesautomatically. If this is not possible, there is atransfer conflict. Select Check one by one, Priorityto this phone, or Priority to other phone to solvethe conflict. For further instructions, selectOptions > Help.Display indicators The device is being used in a GSM network(network service). The device is being used in a UMTS network(network service). You have one or more unread messages in theInbox folder in Messaging. You have received new e-mail in the remotemailbox. There are messages waiting to be sent in theOutbox folder. You have missed calls. The ringing type is set to silent, and the messagealert tone and e-mail alert tone are set to off. The device keypad is locked. A clock alarm is active. The second phone line is being used (networkservice). All calls to the device are diverted to anothernumber (network service). If you have two phonelines, a number indicates the active line. A compatible headset is connected to the device. A compatible TV out cable is connected to thedevice. A compatible text phone is connected to thedevice. A data call is active (network service). A GPRS packet data connection is active (networkservice). indicates the connection is on hold and that a connection is available. A packet data connection is active in a part of thenetwork that supports EGPRS (network service). 21Your device
indicates the connection is on hold and that aconnection is available. The icons indicate thatEGPRS is available in the network, but your device isnot necessarily using EGPRS in the data transfer. A UMTS packet data connection is active (networkservice). indicates the connection is on hold and that a connection is available. High-speed downlink packet access (HSDPA) issupported and active (network service). indicatesthe connection is on hold and that a connectionis available. See "Fast downloading", p. 24. You have set the device to scan for wireless LANs,and a wireless LAN is available (network service).See "About WLAN", p. 33. A wireless LAN connection is active in anetwork that has encryption. A wireless LAN connection is active in a networkthat does not have encryption. Bluetooth connectivity is on. See "Bluetoothconnectivity", p. 36. Data is being transmitted using Bluetoothconnectivity. When the indicator is blinking, yourdevice is trying to connect with another device. A USB connection is active. An infrared connection is active. If the indicatoris blinking, the device is trying to connect to theother device or the connection has been lost.Volume and loudspeakercontrolTo increase or decrease the volume level when youhave an active call or are listening to a sound, usethe volume key.The built-in loudspeakerallows you to speak andlisten from a shortdistance without having to hold the device to yourear.Warning: Do not hold the device near yourear when the loudspeaker is in use, because thevolume may be extremely loud.To use the loudspeaker during a call, selectOptions > Activate loudspeaker.To turn off the loudspeaker, select Options >Activate handset.Lock the keypadTo lock the keys, press the left selection key, thenthe right selection key.To unlock the keys, open the 2-way slide, or pressthe left selection key, then the right selection key.22Your device
You can select to lock the keypad automatically aftera time-out or when the 2-way slide is closed. See"Security settings", p. 143.Offline profilePress , and select Tools > Profiles > Offline.The offline profile lets you use the device withoutconnecting to the wireless network. When youactivate the offline profile, the connection to thewireless network is turned off, as indicated by inthe signal strength indicator area. All wireless RFsignals to and from the device are prevented. If youtry to send messages, they are placed in the outboxto be sent later.When the offline profile is active, you can use yourdevice without a SIM card.Important: In the offline profile you cannotmake or receive any calls, or use other features thatrequire cellular network coverage. Calls may still bepossible to the official emergency numberprogrammed into your device. To make calls, youmust first activate the phone function by changingprofiles. If the device has been locked, enter the lockcode.When you have activated the offline profile, you canstill use the wireless LAN, for example, to read youre-mail or browse on the internet. Remember tocomply with any applicable safety requirementswhen establishing and using a wireless LANconnection. You can also use Bluetooth connectivitywhile in the offline profile.To leave the offline profile, press the power keybriefly, and select another profile. The device re-enables wireless transmissions (providing there issufficient signal strength).GamesYou can play high-quality multiplayer N-Gage™games with your device.Your device includes either one of the followingapplications in the main menu:●Discover N-Gage application — With this previewapplication you can get information about theupcoming N-Gage gaming experience, try outgame demos, and download and install the fullN-Gage application when it becomes available.●N-Gage application — The full featuredapplication gives you access to the complete N-Gage experience replacing the Discover N-Gageapplication in the menu. You can find newgames, try and buy games, find other players,and access scores, events, chat, and more. Somefeatures may not be available at the time ofsoftware installation on your device, checkwww.n-gage.com for software updates.23Your device
For the full N-Gage experience, you need internetaccess on your device, either through the cellularnetwork or wireless LAN. Contact your serviceprovider for more information on data services.For more information, visit www.n-gage.com.Multimedia menuWith the multimediamenu, you can view yourmost frequently usedmultimedia content. Theselected content is shownin the appropriateapplication.To open or close themultimedia menu, pressthe multimedia key. Tobrowse the tiles, scroll leftor right. To select items,press the scroll key. To return to the multimediamenu from an open application, press themultimedia key.Select from the following:●Music — Enter Music player and the Now playingview, browse your songs and play lists, ordownload and manage podcasts.●Gallery — View your last taken picture, start aslide show of your images, or view media files inalbums.●Games — Try out Nokia Nseries games.●Maps — View your favourite locations in Maps.●Internet — View your favourite web links in thebrowser.●Contacts — Add your own contacts, sendmessages, or make voice calls. To add a newcontact to an empty position on the list, press thescroll key, and select a contact. To send amessage, in the multimedia menu, select acontact, and Send text message or Sendmultimedia msg..●Videos — View your favourite videos, and videoclips saved in Nokia Video Centre.To change the order of the tiles, select Options >Arrange tiles.Fast downloadingHigh-speed downlink packet access (HSDPA, alsocalled 3.5G, indicated by ) is a network servicein UMTS networks and provides high-speed datadownloads. When HSDPA support in the device isactivated and the device is connected to a UMTSnetwork that supports HSDPA, downloading datasuch as messages, e-mail, and browser pagesthrough the cellular network may be faster. An24Your device
active HSDPA connection is indicated by . See"Display indicators", p. 21.You can activate or deactivate support for HSDPA inthe device settings. See "Packet datasettings", p. 151.For availability and subscription to data connectionservices, contact your service provider.HSDPA only affects the download speed; sendingdata to the network, such as messages and e-mail,is not affected.25Your device
Web browserWith the Web browser, you can view hypertextmarkup language (HTML) web pages on the internetas originally designed. You can also browse webpages that are designed specifically for mobiledevices, and use extensible hypertext markuplanguage (XHTML), or the wireless markup language(WML).To browse the web, you need to have an internetaccess point configured in your device.Browse the webPress , and select Web.Shortcut: To start the browser, press andhold 0 in the standby mode.Important: Use only services that you trustand that offer adequate security and protectionagainst harmful software.Important: Only install and use applicationsand other software from trusted sources, such asapplications that are Symbian Signed or havepassed the Java VerifiedTM testing.To browse a web page, in the bookmarks view,select a bookmark, or enter the address in the field(), and press the scroll key.Some web pages may contain material, such asgraphics and sounds, that requires a large amountof memory to view. If your device runs out ofmemory while loading such a page, the graphics onthe page are not shown.To browse web pages without graphics, to savememory, select Options > Settings > Page >Load content > Text only.To enter a new web page address you want to visit,select Options > Go to web address.Tip: To visit a web page saved as a bookmarkin the bookmarks view, while browsing, press1, and select a bookmark.To retrieve the latest content of the page from theserver, select Options > Navigation options >Reload.To save the web address of the current page as abookmark, select Options > Save as bookmark.To use visual history to view snapshots of the pagesyou have visited during the current browsing26Web browser
session, select Back (available if History list is seton in the browser settings and the current page isnot the first page you visit). To go to a previouslyvisited page, select the page.To save a page while browsing, select Options >Tools > Save page.You can save pages and browse them later whenoffline. You can also group these saved pages intofolders. To access the pages you have saved, selectOptions > Bookmarks > Saved pages.To open a sublist of commands or actions for thepage that is open, select Options > Serviceoptions (if supported by the web page).To allow or prevent the automatic opening ofmultiple windows, select Options > Window >Block pop-ups or Allow pop-ups.Shortcuts while browsing●Press 1 to open your bookmarks.●Press 2 to search for keywords in the currentpage.●Press 3 to return to the previous page.●Press 5 to list all open windows.●Press 8 to show the page overview of the currentpage. Press 8 again to zoom in and view thedesired section of the page.●Press 9 to enter a new web address.●Press 0 to go to the home page (if defined insettings).●Press * and # to zoom in or out on the page.Tip: To return to the standby mode with thebrowser open in the background, press twice or the end key. To return to the browser,press and hold , and select the browserfrom the list.Browser toolbarThe browser toolbar helps you select frequentlyused functions of the browser.To open the toolbar, press and hold the scroll keyon an empty spot on a web page. To move withinthe toolbar, scroll left or right. To select a feature,press the scroll key.In the toolbar, select from the following:●Frequently used links — View a list of the webaddresses you visit frequently.●Page overview — See an overview of thecurrent web page.●Find — Search for keywords within the currentpage.●Reload — Refresh the page.●Subscribe to web feeds (if available) — View alist of available web feeds on the current webpage, and subscribe to a web feed.27Web browser
Navigate pagesMini Map and page overview help you navigate webpages that contain a large amount of information.When Mini Map is set on in the browser settings andyou scroll through a large web page, Mini Map opensand shows an overview of the web page youbrowse.To set Mini Map on, select Options > Settings >General > Mini map > On.To move in Mini Map, scroll left, right, up, or down.When you find the desired location, stop scrolling.Mini Map disappears and leaves you at the selectedlocation.When you are browsing a web page that contains alarge amount of information, you can also use Pageoverview to view what kind of information thepage contains.To show the page overview of the current page,press 8. To find the desired spot on the page, scrollup, down, left, or right. Press 8 again to zoom in andview the desired section of the page.Web feeds and blogsWeb feeds are xml files on web pages that are usedby the weblog community and news organisationsto share the latest headlines or text, for example,news feeds. Blogs or weblogs are web diaries. Mostof the web feeds use RSS and Atom technologies. Itis common to find web feeds on web, blog, and wikipages.The Web application automatically detects if a webpage contains web feeds.To subscribe to a web feed, select Options >Subscribe.To view the web feeds to which you havesubscribed, in the bookmarks view, select Webfeeds.To update a web feed, select it and Options >Refresh.To define how the web feeds are updated, selectOptions > Settings > Web feeds.WidgetsThe web browser supports widgets (networkservice). Widgets are small, downloadable webapplications that deliver multimedia, news feeds,and other information, such as weather reports, toyour device. Installed widgets appear as separateapplications in the Applications folder.You can download widgets using the Download!application or from the web.28Web browser
The default access point for widgets is the same asin the web browser. When active in the background,some widgets may update informationautomatically to your device.Content searchTo search for keywords, phone numbers, or e-mailaddresses within the current web page, selectOptions > Find and the desired option. To go tothe previous match, scroll up. To go to the nextmatch, scroll down.Tip: To search for keywords within the page,press 2.Download and purchaseitemsYou can download items such as ringing tones,images, operator logos, themes, and video clips.These items can be provided free of charge, or youcan purchase them. Downloaded items are handledby the respective applications in your device, forexample, a downloaded photo or an .mp3 file canbe saved in Gallery.Important: Only install and use applicationsand other software from trusted sources, such asapplications that are Symbian Signed or havepassed the Java VerifiedTM testing.To download an item, do the following:1. Select the link.2. Select the appropriate option to purchase theitem (for example, "Buy").3. Carefully read all the information provided.4. To continue or cancel the download, select theappropriate option (for example, "Accept" or"Cancel").When you start a download, a list of ongoing andcompleted downloads from the current browsingsession is displayed.To modify the list, select Options > Downloads.In the list, scroll to an item, and select Options tocancel ongoing downloads, or open, save, or deletecompleted downloads.BookmarksThe bookmarks view opens when you open the Webapplication. You can select web addresses from a listor from a collection of bookmarks in the Auto.bookmarks folder. You can also enter the URLaddress of the web page you want to visit directlyinto the field ( ).29Web browser
indicates the starting page defined for thedefault access point.You can save URL addresses as bookmarks whilebrowsing on the internet. You can also saveaddresses received in messages to your bookmarksand send saved bookmarks.To open the bookmarks view while browsing, press1, or select Options > Bookmarks.To edit the details of a bookmark, such as the title,select Options > Bookmark manager > Edit.In the bookmarks view, you can also open otherbrowser folders. The Web application allows you tosave web pages during browsing. In the Savedpages folder, you can view the content of the pagesyou have saved offline.Web also keeps track of the web pages you visitduring browsing. In the Auto. bookmarks folder,you can view the list of visited web pages.In Web feeds, you can view saved links to webfeeds and blogs to which you have subscribed. Webfeeds are commonly found on major newsorganisation web pages, personal weblogs, onlinecommunities that offer the latest headlines, andarticle summaries. Web feeds use RSS and Atomtechnologies.Empty the cacheThe information or services you have accessed arestored in the cache memory of the device.A cache is a memory location that is used to storedata temporarily. If you have tried to access or haveaccessed confidential information requiringpasswords, empty the cache after each use. Theinformation or services you have accessed arestored in the cache.To empty the cache, select Options > Clearprivacy data > Clear cache.End the connectionTo end the connection and view the browser pageoffline, select Options > Tools > Disconnect; orto end the connection and close the browser, selectOptions > Exit.To take the browser to the background, press theend key once. To end the connection, press and holdthe end key.To delete the information the network servercollects about your visits to various web pages,select Options > Clear privacy data > Deletecookies.30Web browser
Connection securityIf the security indicator ( ) is displayed during aconnection, the data transmission between thedevice and the internet gateway or server isencrypted.The security icon does not indicate that the datatransmission between the gateway and the contentserver (or place where the requested resource isstored) is secure. The service provider secures thedata transmission between the gateway and thecontent server.Security certificates may be required for someservices, such as banking services. You are notifiedif the identity of the server is not authentic or if youdo not have the correct security certificate in yourdevice. For more information, contact your serviceprovider.Web settingsPress , and select Web.Select Options > Settings and from the following:General settings●Access point — Change the default access point.Some or all access points may be preset for yourdevice by your service provider; you may not beable to change, create, edit, or remove them.●Homepage — Define the home page.●Mini map — Set Mini Map on or off. See "Navigatepages", p. 28.●History list — While browsing, to select Back tosee a list of the pages you have visited during thecurrent browsing session, set History list on.●Security warnings — Hide or show securitynotifications.●Java/ECMA script — Enable or disable the use ofscripts.Page settings●Load content — Select whether you want toload images and other objects while browsing. Ifyou select Text only, to load images or objectslater during browsing, select Options > Tools >Load images.●Screen size — Select between full screen and thenormal view with the options list.●Default encoding — If text characters are notshown correctly, you can select another encodingaccording to language for the current page.●Block pop-ups — Allow or block automaticopening of different pop-ups while browsing.●Automatic reload — If you want the web pagesto be refreshed automatically while browsing,select On.●Font size — Define the font size that is used forweb pages.Privacy settings 31Web browser
●Auto. bookmarks — Enable or disableautomatic bookmark collecting. If you want tocontinue saving the addresses of the visited webpages into the Auto. bookmarks folder, but hidethe folder from the bookmarks view, select Hidefolder.●Form data saving — If you do not want the datayou enter to different forms on a web page to besaved and used the next time you open the page,select Off.●Cookies — Enable or disable the receiving andsending of cookies.Web feed settings●Automatic updates — Define whether you wantthe web feeds to be updated automatically andhow often you want to update them. Setting theapplication to retrieve web feeds automaticallymay involve the transmission of large amountsof data through your service provider's network.Contact your service provider for informationabout data transmission charges.●Acc. point for auto-update — Select thedesired access point for updating. This option isonly available when Automatic updates is on.32Web browser
ConnectionsYour device offers several options to connect to theinternet or to another compatible device or PC.Wireless LANYour device supports wireless local area network(WLAN). With WLAN, you can connect your device tothe internet and compatible devices that haveWLAN.About WLANTo use WLAN, it must be available in the location,and your device must be connected to the WLAN.Some places, like France, have restrictions on theuse of wireless LAN. Check with your localauthorities for more information.Features that use WLAN, or that are allowed to runin the background while using other features,increase the demand on battery power and reducethe battery life.Your device supports the following WLAN features:●IEEE 802.11b/g standard●Operation at 2.4 GHz●Wired equivalent privacy (WEP) with keys up to128 bits, Wi-Fi protected access (WPA), and802.1x encryption methods. These functions canbe used only if they are supported by thenetwork.WLAN connectionsTo use WLAN, you must create an internet accesspoint (IAP) for WLAN. Use the access point forapplications that need to connect to the internet.See "WLAN internet access points", p. 34.Important: Always enable one of theavailable encryption methods to increase thesecurity of your wireless LAN connection. Usingencryption reduces the risk of unauthorized accessto your data.A WLAN connection is established when you createa data connection using a WLAN internet accesspoint. The active WLAN connection ends when youend the data connection.You can use WLAN during a voice call or when packetdata is active. You can only be connected to one33Connections
WLAN access point device at a time, but severalapplications can use the same internet access point.When the device is in the offline profile, you can stilluse WLAN (if available). Remember to comply withany applicable safety requirements whenestablishing and using a WLAN connection.Tip: To check the unique media access control(MAC) address that identifies your device,enter *#62209526# in the standby mode.WLAN wizardThe WLAN wizard helps you to connect to a WLANand manage your WLAN connections.The WLAN wizard shows the status of your WLANconnections in the active standby mode. To view theavailable options, scroll to the row showing thestatus, and select it.If the search finds WLANs, for example, WLANnetwork found is displayed, to create an internetaccess point (IAP) and start the web browser usingthis IAP, select the status and Start Webbrowsing.If you select a secured WLAN network, you are askedto enter the relevant passcodes. To connect to ahidden network, you must enter the correctnetwork name (service set identifier, SSID). Tocreate a new access point for a hidden WLAN, selectNew WLAN.If you are connected to a WLAN, the IAP name isdisplayed. To start the web browser using this IAP,select the status and Continue Web browsing. Toend the connection in the WLAN, select the statusand Disconnect WLAN.If WLAN scanning is off and you are not connectedto any WLAN, WLAN scanning off is displayed. Toset scanning on and search for available WLANs,select the status and press the scroll key.To start a search for available WLANs, select thestatus and Search for WLAN. To set WLAN scanningoff, select the status and select WLAN scanningoff.To access the WLAN wizard application in the menu,press , and select Tools > WLAN wiz..WLAN internet access pointsPress , and select Tools > WLAN wiz.Select Options and from the following:●Filter WLAN networks — Filter out WLANs inthe list of found networks. The selected networksare filtered out the next time the applicationsearches for WLANs.34Connections
●Details — View the details of a network shownin the list. If you select an active connection, theconnection details are displayed.●Define access point — Create an internet accesspoint (IAP) in a WLAN.●Edit access point — Edit the details of anexisting IAP.You can also use connection manager to createinternet access points. See "Active dataconnections", p. 35.Operating modesThere are two operating modes in WLAN:infrastructure and ad hoc.The infrastructure operating mode allows twokinds of communication: wireless devices areconnected to each other through a WLAN accesspoint device, or wireless devices are connected to awired LAN through a WLAN access point device.In the ad hoc operating mode, devices can send andreceive data directly with each other.Connection managerActive data connectionsPress , and select Tools > Connectivity >Conn. mgr. > Active data connections.In the active data connections view, you can see theopen data connections: data calls packet data connections WLAN connectionsNote: The actual time invoiced for calls byyour service provider may vary, depending onnetwork features, rounding off for billing, and soforth.To end a connection, select Options >Disconnect. To close all open connections, selectOptions > Disconnect all.To view the details of a connection, selectOptions > Details. The details shown depend onthe connection type.Available WLAN networksPress , and select Tools > Connectivity >Conn. mgr. > Available WLAN networks.The available WLAN view shows a list of WLANswithin range, their network mode (infrastructure orad hoc), and signal strength indicator. is shownfor networks with encryption, and if your devicehas an active connection in the network.To view the details of a network, select Options >Details.35Connections
To create an internet access point in a network,select Options > Define access point.Bluetooth connectivityAbout Bluetooth connectivityYou can make a wireless connection to othercompatible devices with Bluetooth connectivity.Compatible devices may include mobile phones,computers, and enhancements such as headsetsand car kits. You can use Bluetooth connectivity tosend images, video clips, music and sound clips, andnotes; make a wireless connection to yourcompatible PC (for example, to transfer files); andconnect to a compatible printer to print imageswith Image print.Since devices with Bluetooth wireless technologycommunicate using radio waves, they do not needto be in direct line-of-sight. However, they must bewithin 10 metres (33 feet) of each other, althoughthe connection may be subject to interference fromobstructions such as walls or from other electronicdevices.This device is compliant with BluetoothSpecification 2.0 supporting the following profiles:Advanced Audio Distribution Profile, Audio/VideoRemote Control Profile, Basic Imaging Profile, BasicPrinting Profile, Dial-up Networking Profile, FileTransfer Profile, Hands-Free Profile, Headset Profile,Human Interface Device Profile, Object Push Profile,SIM Access Profile, and Synchronization Profile. Toensure interoperability between other devicessupporting Bluetooth technology, use Nokiaapproved enhancements for this model. Check withthe manufacturers of other devices to determinetheir compatibility with this device.There may be restrictions on using Bluetoothtechnology in some locations. Check with your localauthorities or service provider.Features using Bluetooth technology, or allowingsuch features to run in the background while usingother features, increase the demand on batterypower and reduce the battery life.When the device is locked, you cannot use Bluetoothconnectivity. See "Phone and SIM", p. 143.SettingsPress , and select Tools > Bluetooth.When you open the application for the first time,you are asked to define a name for your device. Youcan change the name later on.Select from the following:●Bluetooth — To make a wireless connection toanother compatible device, first set Bluetoothconnectivity On, then establish a connection. Toswitch off Bluetooth connectivity, select Off. 36Connections
●My phone's visibility — To allow your device tobe found by other devices with Bluetoothwireless technology, select Shown to all. To seta time after which the visibility is set from shownto hidden, select Define period. To hide yourdevice from other devices, select Hidden. ●My phone's name — Edit the name shown toother devices with Bluetooth wirelesstechnology.●Remote SIM mode — To enable another device,such as a compatible car kit enhancement, to usethe SIM card in your device to connect to thenetwork, select On. See "Remote SIMmode", p. 39.Security tipsPress , and select Tools > Bluetooth.When you are not using Bluetooth connectivity, tocontrol who can find your device and connect to it,select Bluetooth > Off or My phone's visibility >Hidden.Do not pair with or accept connection requests froman unknown device. This protects your device fromharmful content.Send data using BluetoothconnectivitySeveral Bluetooth connections can be active at atime. For example, if you are connected to acompatible headset, you can also transfer files toanother compatible device at the same time.1. Open the application where the item you wantto send is stored. For example, to send an imageto another compatible device, open Gallery.2. Select the item and Options > Send > ViaBluetooth.Devices with Bluetooth wireless technology thatare within range are displayed. Device icons areas follows: computer phone audio or video device other deviceTo interrupt the search, select Stop.3. Select the device with which you want toconnect.4. If the other device requires pairing before datacan be transmitted, a tone sounds, and you areasked to enter a passcode. See "Pairdevices", p. 38.37Connections
When the connection is established, Sendingdata is displayed.Tip: When searching for devices, somedevices may show only the unique address(device address). To find the unique addressof your device, enter *#2820# in the standbymode. Pair devicesTo pair with compatible devices and view yourpaired devices, in the main view of Bluetoothconnectivity, scroll right.Before pairing, create your own passcode (1 to 16digits), and agree with the owner of the otherdevice to use the same code. Devices that do nothave a user interface have a factory-set passcode.The passcode is used only once.1. To pair with a device, select Options > Newpaired device. Devices that are within range aredisplayed.2. Select the device, and enter the passcode. Thesame passcode must be entered on the otherdevice as well.3. Some audio enhancements connectautomatically to your device after pairing.Otherwise, scroll to the enhancement, and selectOptions > Connect to audio device.Paired devices are indicated by in the devicesearch.To set a device as authorised or unauthorised, scrollto the device, and select from the following options:●Set as authorized — Connections between yourdevice and the authorised device can be madewithout your knowledge. No separateacceptance or authorisation is needed. Use thisstatus for your own devices, such as yourcompatible headset or PC or devices that belongto someone you trust. indicates authoriseddevices in the paired devices view.●Set as unauthorized — Connection requestsfrom this device must be accepted separatelyevery time.To cancel a pairing, scroll to the device, and selectOptions > Delete.If you want to cancel all pairings, select Options >Delete all.Receive data using BluetoothconnectivityWhen you receive data through Bluetoothconnectivity, a tone sounds, and you are asked ifyou want to accept the message. If you accept, is displayed, and the item is placed in theInbox folder in Messaging. Messages received38Connections
through Bluetooth connectivity are indicated by.Remote SIM modeBefore the remote SIM mode can be activated, thetwo devices must be paired and the pairing initiatedfrom the other device. When pairing, use a 16-digitpasscode, and set the other device as authorised.To use the remote SIM mode with a compatible carkit enhancement, activate Bluetooth connectivity,and enable the use of the remote SIM mode withyour device. Activate the remote SIM mode from theother device.When the remote SIM mode is on in your device,Remote SIM mode is displayed in the standbymode. The connection to the wireless network isturned off, as indicated by in the signal strengthindicator area, and you cannot use SIM card servicesor features requiring cellular network coverage.When the wireless device is in the remote SIM mode,you can only use a compatible connectedenhancement, such as a car kit, to make or receivecalls. Your wireless device will not make any callswhile in this mode, except to the emergencynumbers programmed into your device. To makecalls from your device, you must leave the remoteSIM mode. If the device is locked, enter the lock codeto unlock it.To leave the remote SIM mode, press the power key,and select Exit remote SIM mode.InfraredWith infrared, you can transfer data (such asbusiness cards, calendar notes, and media files)with a compatible device.Do not point the infrared (IR) beam at anyone's eyeor allow it to interfere with other IR devices. Thisdevice is a Class 1 laser product.To send and receive data using infrared, do thefollowing:1. Ensure that the infrared ports of the sending andreceiving devices are pointing at each other, andthat there are no obstructions between thedevices. The distance between the two devicesis not more than 1 meter (3 feet).2. The user of the receiving device activates theinfrared port.3. To activate the infrared port of your device toreceive data through infrared, press , andselect Tools > Connectivity > Infrared.4. The user of the sending device selects thedesired infrared function to start the datatransfer.39Connections
5. To send data using infrared, locate the desiredfile in an application or the file manager, andselect Options > Send > Via infrared.If the data transfer is not started within 1 minuteafter the activation of the infrared port, theconnection is cancelled and must be started again.Items received using infrared are placed in theInbox folder in Messaging. New infrared messagesare indicated by .USBPress , and select Tools > Connectivity >USB.To have the device ask the purpose of theconnection each time a compatible data cable isconnected, select Ask on connection > Yes.If Ask on connection is set to off or you want tochange the mode during an active connection,select USB mode and from the following:●PC Suite — Use Nokia PC applications such asNokia Nseries PC suite, Nokia Lifeblog, and NokiaSoftware Updater.●Data transfer — Transfer data between yourdevice and a compatible PC. Use this mode alsofor downloading maps with the Nokia MapLoader PC application.●Image print — Print images on a compatibleprinter.●Media player — Synchronise music withWindows Media Player.PC connectionsYou can use your device with a variety of compatiblePC connectivity and data communicationsapplications. With Nokia Nseries PC Suite you can,for example, transfer images between your deviceand a compatible PC.Always create the connection from the PC tosynchronise with your device.Nokia Wireless KeyboardTo set up a Nokia Wireless Keyboard or othercompatible wireless keyboard supporting theBluetooth Human Interface Devices (HID) profile foruse with your device, use the Wireless keyboardapplication. The keyboard enables you to enter textin comfort, using the full QWERTY layout, for textmessages, e-mail, and calendar entries.1. Activate Bluetooth connectivity on your device.2. Switch on the keyboard.3. Press , and select Tools > Connectivity >Wlss. keybd..40Connections
4. To start searching for devices with Bluetoothconnectivity, select Options > Find keyboard.5. Select the keyboard from the list, and press thescroll key to start the connection.6. To pair the keyboard with your device, enter apasscode of your choice (1 to 9 digits) on thedevice and the same passcode on your keyboard.To enter the digits of the passcode, you mayneed to press the Fn key first.7. If you are asked for a keyboard layout, select itfrom a list on your device.When the name of the keyboard appears, its statuschanges to Keyboard connected, and the greenindicator of your keyboard blinks slowly; thekeyboard is ready for use.For details on the operation and maintenance ofyour keyboard, see its user guide.ModemPress , and select Tools > Connectivity >Modem.To connect your device as a modem to a compatiblePC using infrared, press the scroll key.See " Infrared", p. 39.41Connections
Nokia Video CentreWith Nokia Video Centre (network service), you candownload and stream video clips over the air fromcompatible internet video services using packetdata or WLAN. You can also transfer video clips froma compatible PC to your device and view them inVideo Centre.Video Centre supports the same file formats asRealPlayer. All videos are played in the landscapemode by default.Your device may have predefined services.Service providers may provide free content orcharge a fee. Check the pricing in the service or fromthe service provider.Find and view videos1. Press , and select Video center.2. To connect to a service, scroll left or right, andselect the desired video service.The device updates and displays the contentavailable in the service.3. To view videos by categories (if available), scrollleft or right to view the other tabs.4. To view information about a video, selectOptions > Video details.5. Some video clips can be streamed over the air,but others must be first downloaded to yourdevice. To download a video clip, selectOptions > Download.To stream a video clip or view a downloaded clip,select Options > Play.42Nokia Video Centre
6. When the clip is playing, use the media keys tocontrol the player. To adjust the volume, pressthe volume key.Downloads continue in the background if you exitthe application. The downloaded videos are savedin Video center > My videos.To connect to the internet to browse availableservices that you can add to the main view, selectAdd new services.Internet videosInternet videos are video clips distributed in theinternet using RSS-based feeds. You can add newfeeds to Internet videos in the settings.You can view your feeds in the Internet videosfolder in Video Centre.To add or delete feeds, select Options > Feedsubscriptions.To view the videos available in a feed, scroll to it,and press the scroll key.To view information about a video, selectOptions > Video details.To download a video, scroll to it, and selectOptions > Download.To play the downloaded video, press the scroll key.Play downloaded videosThe downloaded videos are saved in Videocenter > My videos.To play a downloaded video, press the scroll key.To play a downloaded video in the home network,select Options > Show via home network. Homenetwork must be configured first. See "About homenetwork", p. 80.When the clip is playing, use the media keys tocontrol the player. To adjust the volume, press thevolume key.If there is not enough free space in the devicememory, the application automatically deletessome of the oldest videos when new videos aredownloaded. indicates videos that may soon bedeleted.To prevent a video from being automaticallydeleted ( ), select Options > Protect.Transfer videos from your PCTransfer your own videos to Video Centre fromcompatible devices using a compatible USB datacable.To transfer videos from a compatible PC, do thefollowing:43Nokia Video Centre
1. To view your device on a PC as a mass memorydevice (E:\) where you can transfer any datafiles, make the connection with a compatibleUSB data cable.2. Select Data transfer as the connection mode.3. Select the videos you want to copy from your PC.4. Transfer the videos to E:\My Videos in the massmemory of your device.The transferred videos appear in the Myvideos folder in Video Centre. Video files in otherfolders of your device are not displayed.SettingsIn the Video Centre main view, select Options >Settings and from the following:●Video service selection — Select the videoservices you want to appear in the main view ofthe application. You can also view the details ofa video service.Some services require a user name and apassword that you receive from the serviceprovider.●Default access points — Select the accesspoints used for the data connection. Using packetdata access points to download files may involvethe transmission of large amounts of datathrough your service provider's network. Contactyour service provider for information about datatransmission charges.●Parental control — Activate the parental lockfor video services.●Preferred memory — Select whetherdownloaded videos are saved in the devicememory or mass memory. If the selectedmemory becomes full, the device saves thecontent in the other memory, if available. If thereis not enough space in the other memory, theapplication automatically deletes some of theoldest videos.●Thumbnails — Select whether to viewthumbnail images in video lists.44Nokia Video Centre
Music folderMusic playerWarning: Listen to music at a moderatelevel. Continuous exposure to high volume maydamage your hearing. Do not hold the device nearyour ear when the loudspeaker is in use, becausethe volume may be extremely loud.Music player supports files formats such as AAC, AAC+, eAAC+, MP3, and WMA. Music player does notnecessarily support all features of a file format or allthe variations of file formats.You can also use Music player to listen to podcastepisodes. Podcasting is the method for deliveringaudio or video content over the internet usingeither RSS or Atom technologies for playback onmobile devices and PCs.You can transfer music from other compatibledevices to your device. See "Transfer music to yourdevice", p. 48.Play a song or a podcast episodeYou may have to refresh the music and podcastlibraries after you have updated the song or podcastselection in your device. To add all available itemsto the library, in the Music player main view, selectOptions > Refresh.To play a song or a podcast episode, do thefollowing:1. Press , and select Music > Music player.2. Select Music or Podcasts.3. Select categories tonavigate to the song orpodcast episode you wantto hear.4. To play the selected files,press .To pause playback, press ;to resume, press again.To stop playback, press .45Music folder
To fast forward or rewind, press and hold or. To go to the nextitem, press .To return to thebeginning of theitem, press .To skip to theprevious item,press againwithin 2 secondsafter a song or podcast has started.To switch random play ( ) on or off, selectOptions > Shuffle.To repeat the current item ( ), all items ( ), orto switch repeat off, select Options > Repeat.If you play podcasts, shuffle and repeat areautomatically switched off.To adjust the volume, press the volume key.To modify the tone of the music playback, selectOptions > Equalizer.To modify the balance and stereo image or toenhance bass, select Options > Audio settings.To view a visualisation during playback, selectOptions > Show visualization.To return to the standby mode and leave the playerplaying in the background, press the end key, or toswitch to another open application, press and hold.To close the player, select Options > Exit.Music menuPress , and select Music > Music player >Music.The music menu shows the available music. Selectthe desired option in the music menu to view allsongs, sorted songs, or playlists.When the Music player is playing in the background,to open the Now playing view, press and hold themultimedia key.PlaylistsPress , and select Music > Music player >Music.To view and manage playlists, in the music menu,select Playlists.To view details of the playlist, select Options >Playlist details.Create a playlist1. Select Options > Create playlist.2. Enter a name for the playlist, and select OK.46Music folder
3. To add songs now, select Yes; or to add thesongs later, select No.4. If you select Yes, select artists to find the songsyou want to include in the playlist. Press thescroll key to add items.To show the song list under an artist title, scrollright. To hide the song list, scroll left.5. When you have made your selections, selectDone.The playlist is saved to the mass memory of yourdevice.To add more songs later, when viewing the playlist,select Options > Add songs.To add songs, albums, artists, genres, andcomposers to a playlist from the different views ofthe music menu, select an item and Options > Addto a playlist > Saved playlist or New playlist.To remove a song from a playlist, select Options >Remove. This does not delete the song from thedevice; it only removes it from the playlist.To reorder songs in a playlist, scroll to the song youwant to move, and select Options > Reorder list.To grab songs and drop them to a new position, usethe scroll key.PodcastsPress , and select Music > Music player >Podcasts.The podcast menu displays the podcasts availablein the device.Podcast episodes have three states: never played,partially played, and completely played. If anepisode is partially played, it plays from the lastplayback position the next time it is played. If anepisode is never played or completely played, itplays from the beginning.Home network with music playerYou can play content stored in your Nokia deviceremotely on compatible devices in a home network.You can also copy files from your Nokia device toother devices that are connected to the homenetwork. Home network must be configured first.See "About home network", p. 80.Play a song or a podcast remotely1. Press , and select Music > Music player.2. Select Music or Podcasts.3. Select categories to navigate to the song orpodcast episode you want to hear.4. Select the desired song or podcast andOptions > Play > Via home network.47Music folder
5. Select the device in which the file is played.Copy songs or podcasts wirelesslyTo copy or transfer media files from your device toanother compatible device in a home network,select a file and Options > Move and copy > Copyto home network or Move to home net.. Contentsharing does not have to be switched on in thehome network settings. See "Set sharing on anddefine content", p. 82.Transfer music to your deviceYou can transfer music from a compatible PC orother compatible devices using a compatible USBdata cable or Bluetooth connectivity.PC requirements for music transfer:●Microsoft Windows XP operating system (orlater)●A compatible version of the Windows MediaPlayer application. You can get more detailedinformation about Windows Media Playercompatibility from your device's product pageson the Nokia website.●Nokia Nseries PC Suite 1.6 or laterWindows Media Player 10 may cause playbackdelays to WMDRM technology protected files afterthey have been transferred to your device. CheckMicrosoft support website for a hotfix to WindowsMedia Player 10 or get a newer compatible versionof Windows Media Player.Transfer music from PCYou can use three different methods to transfermusic:●To view your device on a PC as a mass memorydevice where you can transfer any data files,make the connection with a compatible USB datacable or Bluetooth connectivity. If you are usingthe USB cable, select Data transfer as theconnection mode.●To synchronise music with Windows MediaPlayer, connect the compatible USB data cableand select Media player as the connectionmode.●To use Nokia Music Manager in Nokia Nseries PCSuite, connect the compatible USB data cable andselect PC Suite as the connection mode.Use Data transfer and Media player modes totransfer files to the mass memory of your device.To change the default USB connection mode, press, and select Tools > Connectivity > USB > USBmode.Both Windows Media Player and Nokia MusicManager in Nokia Nseries PC Suite have beenoptimised to transfer music files. For informationabout transferring music with Nokia Music48Music folder
Manager, see the help function on Nokia Nseries PCSuite or visit the Nokia support pages.Transfer with Windows Media PlayerMusic synchronisation functions may vary betweendifferent versions of the Windows Media Playerapplication. For more information, see thecorresponding Windows Media Player guides andhelp.Manual synchronisationWith manual synchronisation, you can select thesongs and playlists that you want to move, copy, orremove.1. After your device is connected with WindowsMedia Player, select your device in thenavigation pane on the right, if more than onedevice is connected.2. In the left navigation pane, browse the musicfiles on your PC which you want to synchronise.3. Drag and drop songs to the Sync List on theright.You can see the amount of available memory inyour device above the Sync List.4. To remove songs or albums, select an item in theSync List, right-click, and select Remove fromlist.5. To start the synchronisation, click Start Sync.Automatic synchronisation1. To activate the automatic synchronisationfunction in Windows Media Player, click theSync tab, select Nokia Handset > Set UpSync..., and check the Sync this deviceautomatically check box.2. Select the playlists you want to synchroniseautomatically in the Available playlists pane,and click Add.The selected items are transferred to thePlaylists to sync pane.3. To finalise the setup for automaticsynchronisation, click Finish.When the Sync this device automatically checkbox is checked and you connect your device to thePC, the music library in your device is automaticallyupdated based on the playlists you select forsynchronisation in Windows Media Player. If noplaylists have been selected, the whole PC musiclibrary is selected for synchronisation. If there is notenough free memory in your device, WindowsMedia Player selects manual synchronisationautomatically.To stop automatic synchronisation, click the Synctab, and select Stop Sync to 'Nokia Handset'.49Music folder
Nokia Music StoreIn the Nokia Music Store (network service) you cansearch, browse, and purchase music to download toyour device. To purchase music, you first need toregister for the service.To check the Nokia Music Store availability in yourcountry, visit music.nokia.com.To access the Nokia Music Store, you must have avalid internet access point in the device.To open Nokia Music Store, press , and selectMusic > Music store.To find more music in different categories of themusic menu, select Options > Find in Musicstore.Nokia Music Store settingsThe availability and appearance of the music storesettings may vary. The settings may also bepredefined and not editable. If the settings are notpredefined, you may be asked to select the accesspoint to use when connecting to the music store. Toselect the access point, select Default acc. pt..In the music store, you may be able to edit thesettings by selecting Options > Settings.RadioYou can use the radio as a traditional FM radio withautomatic tuning and saved stations or withparallel visual information related to the radioprogramme on the display if you tune to stationsthat offer Visual Radio service. The Visual Radioservice uses packet data (network service).Warning: Listen to music at a moderatelevel. Continuous exposure to high volume maydamage your hearing. Do not hold the device nearyour ear when the loudspeaker is in use, becausethe volume may be extremely loud.When you open the radio for the first time, a wizardhelps you to save local radio stations (networkservice).If you do not have access to the Visual Radio service,the operators and radio stations in your area maynot support Visual Radio.Listen to the radioThe FM radio depends on an antenna other than thewireless device antenna. A compatible headset orenhancement needs to be attached to the device forthe FM radio to function properly.Press , and select Music > Radio.50Music folder
Note that the quality of the radio broadcastdepends on the coverage of the radio station in thatparticular area.You can normally make a call or answer an incomingcall while listening to the radio. The radio is mutedwhen there is an active call.To start a station search, select or . Tochange the frequency manually, select Options >Manual tuning.If you have previously saved radio stations, to go tothe next or previous saved station, select or.To adjust the volume, press the volume key.To listen to the radio using the loudspeaker, selectOptions > Activate loudspeaker.To view available stations based on location, selectOptions > Station directory (network service).To save the current tuned station to your station list,select Options > Save station. To open the list ofyour saved stations, select Options > Stations.To return to the standby mode and allow the FMradio to play in the background, select Options >Play in background.View visual contentTo check availability and costs and to subscribe tothe service, contact your service provider.To view available visual content for a tuned station,select or Options > Start visual service. If thevisual service ID has not been saved for the station,enter it, or select Retrieve to search for it in thestation directory (network service).When the connection to the visual service isestablished, the current visual content is displayed.Saved stationsTo open the list of your saved stations, selectOptions > Stations.To listen to a saved station, select Options >Station > Listen. To view available visual contentfor a station with Visual Radio service, selectOptions > Station > Start visual service.To change station details, select Options >Station > Edit.SettingsPress , and select Music > Radio.Select Options > Settings and from the following:●Start-up tone — Select whether a tone is playedwhen the application is started.51Music folder
●Auto-start service — To start Visual Radioautomatically when you select a saved stationthat offers Visual Radio service, select Yes.●Access point — Select the access point used forthe data connection. You do not need an accesspoint to use the application as an ordinary FMradio.●Current region — Select the region in which youare currently located. This setting is displayedonly if there is no network coverage when theapplication is started.Nokia PodcastingWith the Nokia Podcasting application (networkservice), you can search, discover, subscribe to, anddownload podcasts over the air, and play, manage,and share audio and video podcasts with yourdevice.Warning: Listen to music at a moderatelevel. Continuous exposure to high volume maydamage your hearing. Do not hold the device nearyour ear when the loudspeaker is in use, becausethe volume may be extremely loud.SettingsBefore using Nokia Podcasting, set your connectionand download settings.The recommended connection method is WLAN.Check with your service provider for terms and dataservice fees before using other connections. Forexample, a flat rate data plan can allow large datatransfers for one monthly fee.Connection settingsTo edit the connection settings, press , and selectMusic > Podcasting > Options > Settings >Connection. Define the following:●Default access point — Select the access pointto define your connection to the internet.●Search service URL — Define the podcast searchservice to be used in searches.Download settingsTo edit the download settings, press , and selectMusic > Podcasting > Options > Settings >Download. Define the following:●Save to — Define the location where you wantto save your podcasts. For optimal use of storagespace, mass memory is recommended.●Update interval — Define how often podcastsare updated.●Next update date — Define the date of the nextautomatic update.●Next update time — Define the time of nextautomatic update.Automatic updates only occur if a specific defaultaccess point is selected and Nokia Podcasting is52Music folder
running. If Nokia Podcasting is not running, theautomatic updates are not activated.●Download limit (%) — Define the size of thememory that is used for podcast downloads.●If limit exceeds — Define what to do if thedownloads exceed the download limit.Setting the application to retrieve podcastsautomatically may involve the transmission of largeamounts of data through your service provider’snetwork. Contact your service provider forinformation about data transmission charges.To restore the default settings, select Options >Restore default in the settings view.SearchSearch helps you to find podcasts by keyword ortitle.The search engine uses the podcast search serviceyou set up in Podcasting > Options > Settings >Connection > Search service URL.To search for podcasts, press , select Music >Podcasting > Search, and enter the desiredkeywords.Tip: Search looks for podcast titles andkeywords in descriptions, not specificepisodes. General topics, such as football orhip-hop, usually give better results than aspecific team or artist.To subscribe to marked channels and add them toyour podcasts, select Options > Subscribe. Youcan also add a podcast by selecting one.To start a new search, select Options > Newsearch.To go the website of the podcast, select Options >Open web page (network service).To see the details of a podcast, select Options >Description.To send selected podcasts to another compatibledevice, select Options > Send.DirectoriesDirectories help you to find new podcast episodesto which to subscribe.To open directories, press , and select Music >Podcasting > Directories.Contents of the directories change. Select thedesired directory folder to update it (networkservice). When the colour of the folder changes,press the scroll key again to open it.Directories can include top podcasts listed bypopularity or themed folders.53Music folder
To open the desired folder topic, press the scroll key.A list of podcasts is displayed.To subscribe to a podcast, select the title, and pressthe scroll key. After you have subscribed to episodesof a podcast, you can download, manage, and playthem in the podcasts menu.To add a new directory or folder, select Options >New > Web directory or Folder. Select a title, URLof the .opml (outline processor markup language)file, and Done.To edit the selected folder, web link, or webdirectory, select Options > Edit.To import an .opml file stored on your device, selectOptions > Import OPML file. Select the location ofthe file, and import it.To send a directory folder as a multimedia messageor using Bluetooth connectivity, select the folderand Options > Send.When you receive a message with an .opml fileusing Bluetooth connectivity, open the file to savethe file into the Received folder in directories. Openthe folder to subscribe to any of the links to add toyour podcasts.DownloadsAfter you have subscribed to a podcast, fromdirectories, search, or by entering a URL, you canmanage, download, and play episodes inPodcasts.To see the podcasts you have subscribed to, selectPodcasting > Podcasts.To see individual episode titles (an episode is aparticular media file of a podcast), select thepodcast title.To start a download, select the episode title. Todownload or to continue to download selected ormarked episodes, select Options > Download orContinue download. You can download multipleepisodes at the same time.To play a portion of a podcast during download orafter partial downloading, select the podcast andOptions > Play preview.Fully downloaded podcasts can be found in thePodcasts folder, but are not shown until the libraryis refreshed.Play and manage podcastsTo display the available episodes from the selectedpodcast, select Options > Open. Under eachepisode, you see the file format, the size of the file,and time of the upload.When the podcast is fully downloaded, to play thefull episode, select Podcasts > Options > Play, or54Music folder
press and select Music > Music player >Podcasts.To update the selected podcast or marked podcasts,for a new episode, select Options > Update.To stop the updating, select Options > Stopupdate.To add a new podcast by entering the URL of thepodcast, select Options > New podcast. If you donot have an access point defined or if during packetdata connection you are asked to enter a user nameand password, contact your service provider.To edit the URL of the selected podcast, selectOptions > Edit.To delete a downloaded podcast or markedpodcasts from your device, select Options >Delete.To send the selected podcast or marked podcasts toanother compatible device as .opml files as amultimedia message or by Bluetooth connectivity,select Options > Send.To update, delete, and send a group of selectedpodcasts at once, select Options > Mark/Unmark, mark the desired podcasts, and selectOptions to choose the desired action.To open the website of the podcast (networkservice), select Options > Open web page.Some podcasts provide the opportunity to interactwith the creators by commenting and voting. Toconnect to the internet to do this, select Options >View comments.55Music folder
Media folderRealPlayer With RealPlayer, you can play video clips or streammedia files over the air without saving them to thedevice first.RealPlayer supports files with extensions such as .3gp, .mp4, or .rm. However, RealPlayer does notnecessarily support all file formats or all thevariations of file formats.When playback is active, in the landscape view, usethe media keys to control the player.Play video clipsPress , and select Applications > Media >RealPlayer.1. To play a saved media file, select Options >Open and from the following:●Most recent clips — Play one of the last sixfiles played in RealPlayer.●Saved clip — Play a file saved in Gallery.2. Scroll to a file, and press the scroll key to play thefile.To adjust the volume, use the volume key.Stream content over the airMany service providers require you to use aninternet access point (IAP) for your default accesspoint. Other service providers allow you to use aWAP access point.In RealPlayer, you can only open an rtsp:// URLaddress. However, RealPlayer plays a .ram file if youopen an http link to it in a browser.To stream content over the air (network service),select a streaming link saved in Gallery, on a webpage, or received in a text message or multimediamessage. Before live content begins streaming,your device connects to the site and starts loadingthe content. The content is not saved in your device.RealPlayer settingsPress , and select Applications > Media >RealPlayer.You may receive RealPlayer settings in a specialmessage from the service provider. For moreinformation, contact your service provider.Select Options > Settings and from the following:56Media folder
●Video — Select whether video clips areautomatically repeated after they finish playing.●Streaming — Select whether to use a proxyserver, change the default access point, and setthe port range used when connecting. Contactyour service provider for the correct settings.Adobe Flash PlayerPress , and select Applications > Media >Flash Player.Use Adobe Flash Player to view, play, and interactwith compatible flash files made for mobile devices.To open a flash file, scroll to it, and select it.Nokia LifeblogPress , and select Applications > Media >Lifeblog.About Nokia LifeblogLifeblog is a combination of software for mobilephone and PC that keeps a multimedia diary of theitems that you collect with your device. Lifeblogorganises your photos, videos, sounds, textmessages, multimedia messages, and weblog postsinto a chronology that you can browse, search,share, publish, and back up. Both Nokia Lifeblog PCand Nokia Lifeblog mobile let you send or blog youritems for others to see.Lifeblog mobile automatically keeps track of yourmultimedia items. Use Lifeblog on your device tobrowse your items, send them to others, or publishthem on the web. Connect your device to acompatible PC using a compatible USB data cable orBluetooth connectivity to transfer and synchronisethe items on the device with your compatible PC.Lifeblog PC provides easy browsing and searchingof the items that you collected with your device.With one-button transfer using a compatible USBdata cable or Bluetooth connectivity, your favouritephotos, videos, text, and multimedia messages aretransferred back to your device.For safekeeping, you can back up your NokiaLifeblog database using the hard disk of yourcompatible PC, CDs, DVDs, removable drive, ornetwork drive. Additionally, you can post items toyour weblog (blog).For more information on weblog services and theircompatibility with Nokia Lifeblog, visitwww.nokia.com/lifeblog, or press F1 in the NokiaLifeblog PC application to open the Nokia Lifebloghelp.57Media folder
Installation on your PCBefore you install Nokia Lifeblog on a compatiblePC, you need the following:●1 GHz Intel Pentium or equivalent, 128 MB RAM●400 MB of available hard disk space (if MicrosoftDirectX and Nokia Nseries PC Suite must beinstalled)●Graphics capability of 1024x768 and 24-bitcolour●32 MB graphics card●Microsoft Windows 2000 or Windows XPTo install Nokia Lifeblog on your PC, do thefollowing:1. Insert the CD-ROM or DVD-ROM supplied withyour device.2. Install Nokia Nseries PC Suite (includes Nokiaconnectivity cable drivers for USB connection).3. Install Nokia Lifeblog for PC.If Microsoft DirectX 9.0 is not already installed onyour PC, it is installed at the same time with NokiaLifeblog for PC.Connect your device and PCTo connect your device and a compatible PC using aUSB data cable, do the following:1. Ensure that you have installed Nokia Nseries PCSuite.2. Connect the USB data cable to the device and thePC.The USB mode should be PC Suite. See"USB", p. 40. When you connect your device tothe PC for the first time after you have installedNokia Nseries PC Suite, the PC installs the specificdriver for your device. This may take a while.3. Start the Nokia Lifeblog PC application.To connect your device and a compatible PC usingBluetooth wireless technology, do the following:1. Ensure that you have installed Nokia Nseries PCSuite on your PC.2. Ensure that you have paired your device and thePC through Bluetooth connectivity with GetConnected in Nokia Nseries PC Suite.3. Activate Bluetooth connectivity on your deviceand on your PC. See "Settings", p. 36.Copy itemsTo copy new or edited items from your device toyour PC, and copy the selected items from your PCto your device:1. Connect your device to the PC.2. Start the Nokia Lifeblog application on your PC.58Media folder
3. In the Nokia Lifeblog PC application, select File> Copy from Phone and to Phone.The new items from your device are copied toyour PC. The items on the To Phone tab on yourPC are copied to your device.Browse time line and favouritesPress , and select Applications > Media >Lifeblog.When you start Nokia Lifeblog on your device, thetime line view opens and shows your multimediaitems.To open your saved favourites, select Options >View Favorites.When you start Nokia Lifeblog on your PC, you haveseveral ways to move around in the time line andfavourites views. The fastest way is to move theslider handle forward or backward. Alternatively,click the time bar to select a date, use the 'Go todate' feature, or use the arrow keys.Post to webPress , and select Applications > Media >Lifeblog.To share your best Nokia Lifeblog items, send themto your weblog on the internet for others to see.You must first create an account with a weblogservice, create one or more weblogs that you use asthe destination of your posts, and add the weblogaccount to Nokia Lifeblog. The recommendedweblog service for Nokia Lifeblog is TypePad fromSix Apart, www.typepad.com.On your device, to add the weblog account in NokiaLifeblog, select Options > Settings > Blog. Onyour PC, to edit accounts, select File > Blog AccountManager....Post items to the web from your device1. In Timeline or Favorites, select the items thatyou want to post to the web.2. Select Options > Post to Web.If you use the feature for the first time, NokiaLifeblog retrieves a weblog list from the weblogserver.The weblog post dialogue opens.3. Select the weblog you want to use from the Postto: list. If you have created new weblogs, toupdate the weblog list, select Options >Refresh blog list.4. Enter a title and a caption for the post. You canalso write a longer story or description in thebody text field.5. When everything is ready, select Options >Send.59Media folder
Post items to the web from your PC1. In the time line or favourites, select the items (amaximum of 50) that you want to post to theweb.2. Select File > Post to the Web....3. Enter a title and a caption for the post. You canalso write a longer story or description in thebody text field.4. Select the weblog that you want to use from thePost to: list.5. When everything is ready, click Send.Import itemsIn addition to the .jpg images of your device, youcan also import .jpg images and .3gp and .mp4video clips, .amr sound files, and .txt text files fromother sources (such as a compatible CD or DVD, orfolders on the hard disk of your compatible PC) intoNokia Lifeblog.To import images or videos from a compatible PC toNokia Lifeblog for PC, do the following:1. In the time line or favourites view, select File >Import from PC....2. Browse the list to find the image or video file, orsound or text file from the list, or navigate toother folders to find the file that you want toimport. Use the Look in list to browse otherdrives or appliances.3. Select a folder, file, or several files. You can viewtheir content in the preview pane.4. To import the folder (including subfolders) orthe selected files, click Open.Activation keysTo view the digital rights activation keys stored inyour device, press , and select Applications >Media > Actv. keys.Digital rights managementContent owners may use different types of digitalrights management (DRM) technologies to protecttheir intellectual property, including copyrights.This device uses various types of DRM software toaccess DRM-protected content. With this device youcan access content protected with WMDRM 10, OMADRM 1.0, and OMA DRM 2.0. If certain DRM softwarefails to protect the content, content owners may askthat such DRM software's ability to access new DRM-protected content be revoked. Revocation may alsoprevent renewal of such DRM-protected contentalready in your device. Revocation of such DRMsoftware does not affect the use of contentprotected with other types of DRM or the use of non-DRM-protected content.60Media folder
Digital rights management (DRM) protected contentcomes with an associated activation key thatdefines your rights to use the content.If your device has OMA DRM protected content, toback up both the activation keys and the content,use the backup feature of Nokia PC Suite. Othertransfer methods may not transfer the activationkeys which need to be restored with the content foryou to be able to continue the use of OMA DRMprotected content after the device memory isformatted. You may also need to restore theactivation keys in case the files on your device getcorrupted.If your device has WMDRM protected content, boththe activation keys and the content will be lost if thedevice memory is formatted. You may also lose theactivation keys and the content in case the files onyour device get corrupted. Losing the activationkeys or the content may limit your ability to use thesame content on your device again. For moreinformation, contact your service provider.Some activation keys may be connected to a specificSIM card, and the protected content can be accessedonly if the SIM card is inserted in the device.In the activation keys main view, select from thefollowing:●Valid keys — View keys that are connected toone or more media files and keys whose validityperiod has not started yet.●Invalid keys — View keys that are not valid; thetime period for using the media file is exceededor there is a protected media file in the devicebut no connected activation key.●Not in use — View keys that have no media filesconnected to them in the device.To buy more usage time or extend the usage periodfor a media file, select an invalid activation key andOptions > Get new key. Activation keys cannot beupdated if web service message reception isdisabled. See "Web service messagesettings", p. 112.To view detailed information, such as the validitystatus and ability to send the file, scroll to anactivation key, and press the scroll key.RecorderPress , and select Applications > Media >Recorder.With Recorder, you can record voice memos andtelephone conversations.To record a telephone conversation, open Recorderduring a voice call. Both parties hear a tone every 5seconds during recording.61Media folder
CameraTo activate the main camera, press and hold thecapture key, or press , and select Applications >Camera.To close the main camera, press Exit.About the cameraYour Nokia N95 8GB has two cameras, a high-resolution camera on the back of the device (themain camera, up to 5 megapixels, in landscapemode) and a lower resolution camera on the front(the secondary camera in portrait mode). You canuse both cameras to take still pictures and recordvideos.Your device supports an image capture resolutionof 2592x1944 pixels. The image resolution in thisguide may appear different.The images and video clips are automatically savedin Images & videos in Gallery. The camerasproduce .jpeg images. Video clips are recorded inthe MPEG-4 file format with the .mp4 file extension,or in the 3GPP file format with the .3gp fileextension (sharing quality). See "Videosettings", p. 72.You can send images and video clips in a multimediamessage, as an e-mail attachment, or by using otherconnection methods, such as Bluetoothconnectivity or wireless LAN connection. You canalso upload them to a compatible online album. See"Share images and videos online", p. 80.To optimise the size of the image or video clip forsending, select the proper image or video qualityfrom the camera settings. Check the size limits ofMMS and e-mail messages with your serviceprovider.Image captureTo activate the main camera, press and hold thecapture key, or press , and select Applications >Camera.Still image camera indicatorsThe still image camera viewfinder displays thefollowing:62Camera
1 — Capture mode indicator2 — Active toolbar. The toolbar is not displayedduring image capture. See "Activetoolbar", p. 63.3 — Battery charge level indicator4 — Image resolution indicator, which indicateswhether the quality of the image is Print 5M -Large, Print 3M - Medium, Print 2M - Medium, E-mail 0.8M - Med., or MMS 0.3M - Small. The qualityof a digitally zoomed picture is lower than that ofan unzoomed picture.5 — Image counter, which displays the estimatednumber of images you can capture using the currentimage quality setting and memory in use. Thecounter is not displayed during image capture.6 — The device memory ( ) and mass memory ( )indicators, which show where images are savedActive toolbarThe active toolbar provides you with shortcuts todifferent items and settings before and after takinga picture or recording a video. Scroll to items, andselect them by pressing the scroll key. You can alsodefine when the active toolbar is visible on thedisplay.The settings in the active toolbar return to thedefault settings after you close the camera.To view the active toolbar before and after taking apicture or recording a video, select Options >Show icons. To view the active toolbar only whenyou need it, select Options > Hide icons. Only thecapture mode and battery level indicators areshown on the display. To activate the active toolbar,press the scroll key. The toolbar is visible for 5seconds.Before taking a picture or recording a video, in theactive toolbar, select from the following: to switch between the video and image modes to select the scene to select the flash mode (images only) to activate the self-timer (images only). See "Youin the picture—self-timer", p. 67. to activate the sequence mode (images only).See "Take pictures in a sequence", p. 66.63Camera
to select a colour effect to show or hide the viewfinder grid (imagesonly) to adjust white balance to adjust the exposure compensation (imagesonly) to adjust sharpness (images only) to adjust contrast (images only) to adjust light sensitivity (images only)The icons change to reflect the current status of thesetting.The available options vary depending on thecapture mode and view you are in. See "After takinga picture", p. 65. See "After recording avideo", p. 69. The active toolbar in Gallery hasdifferent options. See "Active toolbar", p. 74.Take picturesBefore taking a picture, note the following:●To make lighting and colour adjustments, use thescroll key to scroll through the active toolbar. See"Setup settings—adjust colour andlighting", p. 71. Saving the captured image maytake longer if you change the zoom, lighting, orcolour settings.●To free memory for new pictures, transfer files toa compatible PC using a compatible USB datacable, for example, and delete the files from yourdevice. The device informs you when thememory is full, and asks whether you want tochange the memory in use.When taking a picture, note the following:●Use both hands to keep the camera still.●The quality of a digitally zoomed picture is lowerthan that of a nonzoomed picture.●The camera goes into the battery saving mode ifthere are no keypresses for a moment. Tocontinue taking pictures, press the capture key.To take a picture, do the following:1. If the camera is in the video mode, select theimage mode from the active toolbar.64Camera
2. To lock the focus on anobject, press the capturekey halfway down (maincamera only, notavailable in landscapeand sports scenes). Thegreen locked focusindicator appears on thedisplay. If the focus wasnot locked, the red focusindicator appears. Release the capture key, andpress it halfway down again. You can, however,take the picture without locking the focus.3. To take a picture, press the capture key. Do notmove the device before the image is saved.To zoom in or out when taking a picture, use thezoom key in your device.Tip: To open Gallery and view the pictures youhave taken, press on the side of yourdevice twice.To activate the front camera, select Options > Usesecondary camera. To take a picture, press thescroll key. To zoom in or out, scroll up or down.To leave the camera open in the background anduse other applications, press . To return to thecamera, press and hold the capture key.After taking a pictureSelect the following from the active toolbar(available only if you select Show capturedimage > On in the still image camera settings):●If you do not want to keep the image, selectDelete ( ).●To send the image using a multimedia message,e-mail, or other connection methods, such asBluetooth connectivity, press the call key, orselect Send ( ). See "Write and sendmessages", p. 103. This option is not availableduring an active call.You can also send the image to a call recipientduring an active call. Select Send to caller ( )(only available during an active call).●To tag images to the print basket for laterprinting, select Add to Print basket ( ).●To send the image to a compatible online album,select (available only if you have set up anaccount for a compatible online album). See"Share images and videos online", p. 80.To zoom in an image after taking it, press toopen the image in Gallery, and select the zoomingoption from the options list.To use the image as wallpaper in the active standby,select Options > Set as wallpaper.65Camera
To set the image as a call image for a contact, selectOptions > Set as contact call img. > Assign tocontact.To return to the viewfinder to capture a new image,press the capture key.FlashThe flash is available only in the main camera.Keep a safe distance when using the flash. Do notuse the flash on people or animals at close range.Do not cover the flash while taking a picture.The camera of your device has an LED flash for lowlight conditions. The following flash modes areavailable for the still image camera: Automatic(), Red-eye ( ), On ( ), and Off ( ).To change the flash mode, in the active toolbar,select the desired flash mode.ScenesScenes are only available in the main camera.A scene helps you to find the right colour andlighting settings for the current environment. Thesettings of each scene have been set according to acertain style or environment.The default scene in the image mode is Auto, andin the video mode Automatic (both indicated with).To change the scene, in the active toolbar, selectScene modes and a scene.To make your own scene suitable for a certainenvironment, scroll to User defined, and selectOptions > Change. In the user defined scene youcan adjust different lighting and colour settings. Tocopy the settings of another scene, select Based onscene mode and the desired scene. To save thechanges and return to the scenes list, press Back.To activate your own scene, scroll to Userdefined, press the scroll key, and select Select.Take pictures in a sequenceThe sequence mode is available only in the maincamera.To set the camera to take six pictures or the desirednumber of pictures in sequence (if enough memoryis available), in the active toolbar, select Sequencemode.To take six pictures, select Burst. To capture thepictures, press the capture key.To take two or more pictures in a sequence, selectthe desired time interval. To capture pictures usingthe selected time interval, press the capture key. Tostop taking pictures, select Cancel. The number ofpictures taken depends on the available memory.After you take the pictures in the burst mode, theyare shown in a grid on the display. To view a picture,66Camera
press the scroll key to open it. If you used a timeinterval, only the last taken picture is shown on thedisplay. You can view the other pictures in Images& videos in Gallery.You can also use the sequence mode with the self-timer.To return to the sequence mode viewfinder, pressthe capture key.To switch off the sequence mode, in the activetoolbar, select Sequence mode > Single shot.You in the picture—self-timerThe self-timer is available only in the main camera.Use the self-timer to delay the capture so that youcan include yourself in the picture.To set the self-timer delay, in the active toolbar,select Self timer > 2 seconds, 10 seconds, or 20seconds.To activate the self-timer, select Activate. Thedevice beeps when the timer is running and thequadrangle blinks just before the image capture.The camera takes the picture after the selecteddelay elapses.To switch off the self-timer, in the active toolbar,select Self timer > Off.Tip: In the active toolbar, select Self timer >2 seconds to keep your hand steady whentaking a picture.Tips on taking good photographsPicture qualityUse the appropriate picture quality. The camera hasseveral picture quality modes. Use the highestsetting to make sure that the camera produces thebest picture quality available. Note however, thatbetter picture quality requires more storage space.For multimedia message (MMS) and e-mailattachments it may be necessary to use the smallestpicture quality mode optimised for MMS sending.You can define the quality in the camera settings.See "Still image camera settings", p. 70.BackgroundUse a simple background. For portraits and otherpictures with people, avoid having your subject infront of a cluttered, complex background that maydistract attention from the subject. Move thecamera, or the subject, when these conditionscannot be met. Move the camera closer to the objectto take clearer portraits.DepthWhen shooting landscapes and sceneries, adddepth to your pictures by placing objects in the67Camera
foreground. If the foreground object is too close tothe camera, it may be blurred.Lighting conditionsChanging the source, amount, and direction of lightcan change photographs dramatically. Here aresome typical lighting conditions:●Light source behind the subject. Avoid placingyour subject in front of a strong light source. Ifthe light source is behind the subject or visible inthe display, the resulting picture may have weakcontrast, may be too dark, and may containunwanted light effects.●Sidelit subject. Strong side light gives a dramaticeffect but may be too harsh, resulting in toomuch contrast.●Light source in front of the subject. Harshsunlight may cause the subjects to squint theireyes. The contrast may also be too high.●Optimal lighting is found in situations wherethere is plenty of diffused, soft light available, forexample, on a bright, partially cloudy day or ona sunny day in the shadow of trees.Video recordingTo activate the main camera, press and hold thecapture key, or press , and select Applications >Camera.Video capture indicatorsThe video viewfinder displays the following:1 — Capture mode indicator2 — Audio mute on indicator3 — Active toolbar. The toolbar is not displayedduring recording. See "Active toolbar", p. 63.4 — The battery charge level indicator5 — Video quality indicator that indicates whetherthe quality of the video is TV high quality, TVnormal quality, E-mail high quality, E-mailnorm. quality, or Sharing quality6 — The video clip file type7 — Total available video recording time. When youare recording, the current video length indicatoralso shows the elapsed time and time remaining.8 — The device memory ( ) and mass memory ( )indicators that show where videos are saved68Camera
9 — The video stabilisation is turned on ( ). See"Video settings", p. 72.To display all viewfinder indicators, selectOptions > Show icons. Select Hide icons todisplay only the video status indicators, and duringthe recording, the available record time, zoom barwhen zooming, and the selection keys.Record videosBefore recording a video, note the following:●To make lighting and colour adjustments, scrollthrough the active toolbar. See "Setup settings—adjust colour and lighting", p. 71. See"Scenes", p. 66.●To free memory for new video clips, transfer filesto a compatible PC using a compatible USB datacable, for example, and remove the files fromyour device. The device informs you when thememory is full, and asks whether you want tochange the memory in use.To record a video, do the following:1. If the camera is in the image mode, select thevideo mode from the active toolbar.2. To start recording, press the capture key. The redrecord icon ( ) is shown and a tone sounds,indicating that recording has started.3. To pause recording at any time, press Pause.Video recording automatically stops if recordingis set to pause and there are no keypresseswithin a minute. Select Continue to resumerecording.To zoom in or out of the subject, use the zoomkey in your device.4. To stop recording, select Stop. The video clip isautomatically saved to the Images & videosfolder of Gallery. The maximum length of thevideo clip depends on the available memory.To activate the front camera, select Options > Usesecondary camera. To start recording a video,press the scroll key. To zoom in or out, scroll up ordown.After recording a videoAfter you record a video clip, select the followingfrom the active toolbar (available only if Showcaptured video is set to On in the video settings):●To immediately play the video clip you justrecorded, select Play ( ).●If you do not want to keep the video, selectDelete ( ).●To send the video clip using a multimediamessage, e-mail, or other connection methods,such as Bluetooth connectivity, press the call key,69Camera
or select Send ( ). See "Write and sendmessages", p. 103. See "Send data usingBluetooth connectivity", p. 37. This option is notavailable during an active call. You may not beable to send video clips saved in the .mp4 fileformat in a multimedia message.You can also send the video clip to a call recipientduring an active call. Select Send to caller ( )(only available during an active call).●To upload the video clip to a compatible onlinealbum, select (only available if you have set upan account for a compatible online album). See"Share images and videos online", p. 80.●To return to the viewfinder to record a new videoclip, press the capture key.Camera settingsThere are two kinds of settings for the camera:setup settings and main settings. The setup settingsreturn to the default settings after you close thecamera, but the main settings remain the sameuntil you change them again. To adjust the setupsettings, use the options in the active toolbar. See"Setup settings—adjust colour andlighting", p. 71. To change the main settings, inthe image or video mode, select Options >Settings.Still image camera settingsTo change the main settings, in the image mode,select Options > Settings and from the following:●Image quality — Select Print 5M - Large(2592x1944 resolution), Print 3M - Medium(2048x1536 resolution), Print 2M - Medium(1600x1200 resolution), E-mail 0.8M - Med.(1024x768 resolution), or MMS 0.3M - Small(640x480 resolution). The better the imagequality, the more memory the image consumes.If you want to print the image, select Print 5M -Large, Print 3M - Medium, or Print 2M -Medium. If you want to send it using e-mail,select E-mail 0.8M - Med.. To send the imageusing a multimedia message, select MMS 0.3M -Small.These resolutions are only available in the maincamera.●Add to album — Select whether you want tosave the image to a certain album in Gallery. Ifyou select Yes, a list of available albums opens.●Show captured image — Select On if you wantto see the captured image after it is taken orOff if you want to continue taking picturesimmediately.●Default image name — Define the defaultname for the captured images.70Camera
●Extended digital zoom (main camera only) — On (continuous) allows the zoom incrementsto be smooth and continuous between digitaland extended digital zoom, On (paused) allowsthe zoom increments to pause at the digital andextended digital step point, and Off allows alimited amount of zoom while retaining theimage resolution.●Capture tone — Select the tone you want tohear when you take a picture.●Memory in use — Select where you want tostore your images.●Rotate image — Select whether you wantimages that are captured when the device is heldupright to be rotated when you open them inGallery.●Restore camera settings — Select Yes to returnthe default values to the camera settings.Setup settings—adjust colour andlightingTo enable the camera to reproduce colours andlighting more accurately or to add effects to yourpictures or videos, scroll through the active toolbar,and select from the following options:●Flash mode ( ) (images only) — Select thedesired flash mode.●Color tone ( ) — Select a colour effect from thelist.●White balance ( ) — Select the currentlighting condition from the list. This allows thecamera to reproduce colours more accurately.●Exposure compensation ( ) (images only) — Ifyou are shooting a dark subject against a verylight background, such as snow, adjust theexposure to +1 or +2 to compensate thebackground brightness. For light subjectsagainst a dark background, use -1 or -2.●Sharpness ( ) (images only) — Adjust thesharpness of the image.●Contrast ( ) (images only) — Adjust thedifference between the lightest and darkestparts of the image.●Light sensitivity ( ) (images only) — Increasethe light sensitivity in low light conditions todecrease the risk of images that are too dark.The screen display changes to match any settingsyou make so that you see how the change affectsthe pictures or videos.The available settings vary depending on theselected camera.The setup settings are camera specific; if youchange the settings in the secondary camera, thesettings in the main camera do not change. Thesetup settings are also shooting mode specific; ifyou change the settings in the image mode, the71Camera
settings in the video mode do not change.Switching between the modes does not reset thedefined setup settings.The setup settings return to the default settingswhen you close the camera.If you select a new scene, the colour and lightingsettings are replaced by the selected scene. You canchange the setup settings after selecting a scene ifneeded.Video settingsTo change the main settings, in the video mode,select Options > Settings and from the following:●Video quality — Set the quality of the video clipto TV high quality, TV normal quality, E-mailhigh quality, E-mail norm. quality (standardquality for playback through your handset), orSharing quality. If you want to view the videoon a compatible TV or PC, select TV highquality or TV normal quality, which have VGAresolution (640x480) and the .mp4 file format.You may not be able to send video clips saved inthe .mp4 file format in a multimedia message. Tosend the video clip using a multimedia message,select Sharing quality, which has QCIFresolution and the .3gp file format.●Video stabilization — Select On to reducecamera shaking when recording the video.●Audio recording — Select Mute if you do notwant to record sound.●Add to album — Select whether you want toadd the recorded video clip to a certain album inGallery. Select Yes to open a list of availablealbums.●Show captured video — Select whether youwant the first frame of the recorded video clip tobe displayed after the recording stops. SelectPlay from the active toolbar (main camera) orOptions > Play (secondary camera) to view thevideo clip.●Default video name — Define the default namefor the captured video clips.●Memory in use — Select where you want tostore your videos.●Restore camera settings — Select Yes to returnthe default values to the camera settings.72Camera
GalleryTo store and organise your images, video clips,sound clips, and streaming links, or share your fileswith other compatible Universal Plug and Play(UPnP) devices through wireless LAN (WLAN), press, and select Gallery.Tip: If you are in another application, to viewthe last saved picture in Gallery, press on the side of your device. To enter theImages & videos folder main view, press thereview key again.View and organise filesPress , and select Gallery.In Gallery, select Images & videos , Tracks ,Sound clips , Streaming links ,Presentations , or All files , and press the scrollkey to open it.You can browse and openfolders; and mark, copy,and move items to folders.You can also create albumsand mark, copy, and additems to albums. See"Albums", p. 75.To open a file, press thescroll key. Video clips, .ramfiles, and streaming linksopen and play inRealPlayer, and music andsound clips in Music player. See "RealPlayer", p. 56. See "Music player", p. 45.Images and video clipsView images and videosTo view your images and video clips, press , andselect Gallery > Images & videos.Pictures taken and video clips recorded with thecamera of your device are stored in Images &videos. Images and video clips can also be sent toyou in a multimedia message, as an e-mail73Gallery
attachment, or through Bluetooth connectivity orinfrared. To be able to view a received image orvideo clip in Gallery or in the RealPlayer, you mustfirst save it.The video clips saved in Nokia Video Centre are notshown in Images & videos in Gallery. See "NokiaVideo Centre", p. 42.The images andvideo clip files inImages & videosare in a loop andordered by dateand time. Thenumber of files isdisplayed. Tobrowse the filesone by one, scroll left or right. To browse files ingroups, scroll up or down.To open a file, press the scroll key. When an imageis opened, to zoom in the image, press the zoomkey on the side of your device. The zooming ratio isnot stored permanently.If you want the display to be automatically rotatedbased on the orientation of the device, set thedisplay rotation on in the settings. See"Personalisation settings", p. 141.To edit a video clip or a photo, select Options >Edit. See "Edit images", p. 76.To print your images on a compatible printer, selectOptions > Print. See "Image print", p. 79. Youcan also tag images for later printing to the printbasket in Gallery. See "Print basket", p. 75.Organise images and videosTo add an image or a video clip to an album inGallery, select Options > Albums > Add toalbum. See "Albums", p. 75.To tag an image for later printing, select the imageand Add to Print basket from the active toolbar.See "Print basket", p. 75.To use the picture as a background image, select thepicture and Options > Use image > Set aswallpaper.To delete an image or video clip, select Options >Delete.Some of the options may also be available throughthe active toolbar (available when you open animage or a video clip). See "Activetoolbar", p. 74.Active toolbarIn the Images & videos folder, you can use theactive toolbar as a shortcut to different tasks. Theactive toolbar is available only when you haveselected an image or a video clip.74Gallery
In the active toolbar, scroll up or down to differentitems, and select them by pressing the scroll key.The available options vary depending on the viewyou are in and whether you have selected an imageor a video clip.The settings in the active toolbar return to thedefault settings after you close the camera.If you want the active toolbar to always be visibleon the display, select Options > Show icons.To view the active toolbar only when you need it,select Options > Hide icons. To activate the activetoolbar, press the scroll key.Select from the following: to play the selected video clip to send the selected image or video clip to upload the selected image or video clip to acompatible online album (only available if you haveset up an account for a compatible online album).See "Share images and videos online", p. 80. or to add or remove an image from the printbasket. See "Print basket", p. 75. to print the viewed image to start a slide show of your images to delete the selected image or video clipThe available options may vary depending on theview you are in.AlbumsWith albums, you can conveniently manage yourimages and video clips. To view the albums list inGallery, select Images & videos > Options >Albums > View albums.To create a new album, in the albums list view,select Options > New album.To add a picture or a video clip to an album inGallery, scroll to a picture or video clip, and selectOptions > Albums > Add to album. A list ofalbums opens. Select the album to which you wantto add the picture or video clip. The item you addedto the album is still visible in Images & videos inGallery.To remove a file from an album, open the album,scroll to the file, and press C. The file is not deletedfrom Images & videos in Gallery.Print basketYou can tag images to the print basket, and printthem later with a compatible printer or in acompatible printing kiosk, if available. See "Imageprint", p. 79. The tagged images are indicatedwith in Images & videos and albums.To tag an image for later printing, select an image,and Add to Print basket from the active toolbar.75Gallery
To view the images in the print basket, select from Images & videos (available only when youhave added pictures to the print basket), orOptions > Print > View Print basket.To remove an image from the print basket, selectan image in Images & videos or in an album, andOptions > Remove from basket.Slide showTo view your images as a slide show, select animage in Gallery, and Start slide show ( ) in theactive toolbar. The slide show starts from theselected file.To view only the selected images as a slide show,select Options > Mark/Unmark > Mark to markimages, and Options > Slide show > Start tostart the slide show.Select from the following:●Pause — to pause the slide show●Continue — to resume the slide show, if paused●End — to close the slide showTo browse the images, scroll left or right.Before starting the slide show, adjust the slide showsettings. Select Options > Slide show >Settings, and from the following:●Music — to add sound to the slide show. SelectOn or Off.●Song — to select a music file from the list●Delay between slides — to adjust the tempoof the slide show●Zoom and pan — to make the slide show movesmoothly from one slide to another, and letGallery randomly zoom in and out in the imagesTo decrease or increase the volume during the slideshow, use the volume key in your device.Edit imagesImage editorTo edit the pictures after taking them or the onesalready saved in Gallery, select Options > Edit. Theimage editor opens.Select Options > Apply effect to open a gridwhere you can select different edit optionsindicated by small icons. You can crop and rotatethe image; adjust the brightness, colour, contrast,and resolution; and add effects, text, clip art, or aframe to the picture.Crop imageTo crop an image, select Options > Applyeffect > Crop, and a predefined aspect ratio fromthe list. To crop the image size manually, selectManual.76Gallery
If you select Manual, a cross appears in the upperleft corner of the image. Use the scroll key to selectthe area to crop, and select Set. Another crossappears in the lower right corner. Again select thearea to be cropped. To adjust the first selected area,select Back. The selected areas form a rectanglethat forms the cropped image.If you select a predefined aspect ratio, select theupper left corner of the area to be cropped. To resizethe highlighted area, use the scroll key. To freezethe selected area, press the scroll key. To move thearea within the picture, use the scroll key. To selectthe area to be cropped, press the scroll key.Reduce red-eyeTo reduce red-eye in an image, select Options >Apply effect > Red eye reduction.Move the cross onto the eye, and press the scroll key.A loop appears on the display. To resize the loop tofit the size of the eye, use the scroll key. To reducethe redness, press the scroll key. When you finishediting the image, press Done.To save the changes, and return to Images &videos, press Back.Useful shortcutsYou can use the following shortcuts when editingimages:●To view a full-screen image, press *. To return tothe normal view, press * again.●To rotate an image clockwise orcounterclockwise, press 3 or 1.●To zoom in or out, press 5 or 0.●To move on a zoomed image, scroll up, down,left, or right.Edit videosTo edit video clips in Gallery, scroll to a video clip,and select Options > Edit and an editing option.The video editor supports .3gp and .mp4 video fileformats, and .aac, .amr, .mp3, and .wav audio fileformats. It does not necessarily support all featuresof a file format or all the variations of file formats.TV-out modeTo view the captured images and video clips on acompatible TV, use a Nokia Video Connectivity Cable.Before viewing the images and video clips on TV,you may need to configure the TV-out settings forthe applicable TV system and TV aspect ratio. See"Enhancement settings", p. 142.To watch images and video clips on TV, do thefollowing:77Gallery
1. Connect a Nokia Video Connectivity Cable to thevideo input of a compatible TV.2. Connect the other end of the Nokia VideoConnectivity Cable to the Nokia AV Connector ofyour device.3. You may need to select the cable mode.4. Press , and select Gallery > Images &videos and the file you want to view.The images areshown in theimage viewer,and the videoclips are playedin RealPlayer.All audio,including theactive calls, stereo video clip sound, key tone, andringing tone is routed to the TV when the NokiaVideo Connectivity Cable is connected to the device.You can use the device microphone normally.For all applications other than the Images &videos folder in Gallery and RealPlayer, the TVscreen displays what is displayed on the screen ofyour device.The opened image is displayed in full-screen on theTV. When you open an image in the thumbnail viewwhile it is viewed on the TV, zooming in is notavailable.When you open a highlighted video clip, RealPlayerstarts playing the video clip on the device displayand the TV screen. See "RealPlayer ", p. 56.You can view images as a slide show on TV. All itemsin an album or marked images are displayed on theTV in full-screen while the selected music plays. See"Slide show", p. 76.PresentationsWith presentations, you can view SVG (scalablevector graphics) files, such as cartoons and maps.SVG images maintain their appearance whenprinted or viewed with different screen sizes andresolutions.To view SVG files, press , and select Gallery >Presentations. Scroll to an image, and selectOptions > Play. To pause playing, selectOptions > Pause.To zoom in, press 5. To zoom out, press 0.To rotate the image 90 degrees clockwise orcounterclockwise, press 1 or 3, respectively. Torotate the image 45 degrees, press 7 or 9.To switch between full and normal screen, press *.78Gallery
Print imagesImage printTo print images with Image print, select the imageyou want to print, and the print option in Gallery,camera, image editor, or image viewer.Use Image print to print your images using acompatible USB data cable, or Bluetoothconnectivity. You can also print images usingwireless LAN.You can only print images that are in .jpeg format.The pictures taken with the camera areautomatically saved in .jpeg format.Printer selectionTo print images with Image print, select the imageyou want to print, and the print option in Gallery,camera, image editor, or image viewer.When you use Image print for the first time, a list ofavailable compatible printers is displayed after youselect the image. Select a printer. The printer is setas the default printer.To print to a printer compatible with PictBridge,connect the compatible data cable before you selectthe print option, and check that the data cable modeis set to Image print or Ask on connection. See"USB", p. 40. The printer is automatically displayedwhen you select the print option.If the default printer is not available, a list ofavailable printing devices is displayed.To change the default printer, select Options >Settings > Default printer.Print previewAfter you select the printer, the selected images aredisplayed using predefined layouts.To change the layout, scroll left or right to browsethrough the available layouts for the selectedprinter. If the images do not fit on a single page,scroll up or down to display the additional pages.Print settingsThe available options vary depending on thecapabilities of the printing device you selected.To set a default printer, select Options > Defaultprinter.To select the paper size, select Paper size, the sizeof paper from the list, and OK. Select Cancel toreturn to the previous view.Print onlineWith Print online, you can order prints of imagesonline directly to your home or to a store where youcan pick them up. You can also order differentproducts with the selected image, such as mugs or79Gallery
mouse pads. The available products depend on theservice provider.To use Print online, you must have at least oneprinting service configuration file installed. The filescan be obtained from printing service providers thatsupport Print online.For more information on the application, see theguides available at the Nokia product support pagesor your local Nokia website.Share images and videosonlineYou can share images and video clips in compatibleonline albums, weblogs, or in other compatibleonline sharing services on the web. You can uploadcontent, save unfinished posts as drafts andcontinue later, and view the content of the albums.The supported content types may vary dependingon the service provider.Before sharing images and videos online, you mustsubscribe to the service with an online imagesharing service provider, and create a new account.You can usually subscribe to the service on the webpage of the service provider. Contact your serviceprovider for details on subscribing to the service.To upload a file from Gallery to the online service,press , and select Gallery > Images & videos.Scroll to the desired file, and select Options >Send > Post to web, or select the file and fromthe active toolbar.For more information on the application andcompatible service providers, see the Nokia productsupport pages or your local Nokia website.Home networkAbout home networkYour device is compatible with Universal Plug andPlay architecture (UPnP). Using a wireless LAN(WLAN) access point device or a WLAN router, youcan create a home network and connect compatibleUPnP devices that support WLAN to the network,such as your device, a compatible PC, a compatibleprinter, and a compatible sound system or TV, or asound system or TV equipped with a compatiblewireless multimedia receiver.To use the WLAN function of your device in a homenetwork, you must have a working WLAN homeconnection setup and have other UPnP enabledhome devices to connect to the same homenetwork. See "Wireless LAN", p. 33.The home network uses the security settings of theWLAN connection. Use the home network feature ina WLAN infrastructure network with a WLAN accesspoint device and encryption enabled.80Gallery
You can share media files saved in Gallery with othercompatible UPnP devices using the home network.To manage your home network settings, press ,and select Tools > Connectivity > Homemedia. You can also use the home network to view,play, copy, or print compatible media files fromGallery. See "View and share media files", p. 82.Your device is connected to the home network onlyif you accept a connection request from anothercompatible device, or in Gallery, select the option toview, play, print, or copy media files on your deviceor search for other devices in the Home networkfolder.Important security informationWhen you configure your WLAN home network,enable an encryption method on your access pointdevice, then on the other devices you intend toconnect to your home network. Refer to thedocumentation of the devices. Keep any passcodessecret and in a safe place separate from the devices.You can view or change the settings of the WLANinternet access point in your device. See "Accesspoints", p. 149.If you use the ad hoc operating mode to create ahome network with a compatible device, enableone of the encryption methods in WLAN securitymode when you configure the internet accesspoint. See "Connection settings", p. 148. This stepreduces the risk of an unwanted party joining thead hoc network.Your device notifies you if another device attemptsto connect to it and the home network. Do notaccept connection requests from an unknowndevice.If you use WLAN in a network that does not haveencryption, switch off sharing your files with otherdevices, or do not share any private media files. See"Settings for home network", p. 81.Settings for home networkTo share media files saved in Gallery with othercompatible UPnP devices through WLAN, you mustcreate and configure your WLAN home internetaccess point, then configure the settings for homenetwork in the Home media application. See"WLAN internet access points", p. 34. See"Connection settings", p. 148.The options related to home network are notavailable in applications before the settings in theHome media application have been configured.When you access the Home media application forthe first time, the setup wizard opens and helps youdefine the home network settings for your device.To use the setup wizard later, in the Home mediamain view, select Options > Run wizard, andfollow the instructions on the display.81Gallery
To connect a compatible PC to the home network,on the PC, you must install the related software. Youget the software from the CD-ROM or DVD-ROMsupplied with your device, or you can download itfrom the device support pages on the Nokiawebsite.Configure settingsTo configure the settings for home network, selectTools > Connectivity > Home media >Settings and from the following:●Home access point — Select Always ask if youwant the device to ask for the home access pointevery time you connect to the home network,Create new to define a new access point that isused automatically when you use the homenetwork, or None. If your home network doesnot have WLAN security settings enabled, you geta security warning. You can continue and switchthe WLAN security on later; or cancel defining theaccess point and first switch on the WLANsecurity. See "Access points", p. 149.●Device name — Enter a name for your devicethat is shown to the other compatible devices inthe home network.●Copy to — Select the memory where you wantto save copied media files.Set sharing on and define contentSelect Tools > Connectivity > Home media >Share content and from the following:●Content sharing — Allow or deny sharing mediafiles with compatible devices. Do not set contentsharing on before you have configured all theother settings. If you set content sharing on, theother UPnP compatible devices in the homenetwork can view and copy your files you haveselected for sharing in the Images & videosfolder. If you do not want the other devices toaccess your files, set content sharing off.●Images & video — Select media files for sharingwith other devices, or view the sharing status ofimages and videos. To update the content of thefolder, select Options > Refresh content.●Music — Select playlists for sharing with otherdevices, or view the sharing content of playlists.To update the content of the folder, selectOptions > Refresh content.View and share media filesTo share your media files with other UPnPcompatible devices in the home network, setcontent sharing on. See "Set sharing on and definecontent", p. 82. If content sharing is off in yourdevice, you can still view and copy the media files82Gallery
stored in another home network device if it isallowed by the other device.Show media files stored in your deviceTo show your images, videos, and sound clips inanother home network device, such as a compatibleTV, do the following:1. In Gallery, select an image, video clip, or soundclip, and Options > Show via homenetwork.2. Select a compatible device in which the mediafile is shown. The images are shown both in theother home network device and your device, andthe video clips and sound clips are played onlyin the other device.3. To stop sharing, select Options > Stopshowing.Show media files stored in the other deviceTo show media files that are stored on anotherhome network device in your device (or in acompatible TV, for example), do the following:1. Press , and select Tools > Connectivity >Home media > Browse home. Your devicestarts the search of other compatible devices.Device names start to appear on the display.2. Select a device from the list.3. Select the type of media you want to view fromthe other device. The available file types dependon the features of the other device.To search files with different criteria, selectOptions > Find. To sort the found files, selectOptions > Sort by.4. Select the media file or folder you want to view.5. Press the scroll key, and select Play or Show, andOn device or Via home network.6. Select the device in which the file is shown.To adjust the volume when playing a video or soundclip, scroll left or right.To stop sharing the media file, select Back or Stop(available when playing videos and music).Tip: You can print images saved in Gallerythrough a home network with a UPnPcompatible printer. See "Image print", p. 79.Content sharing does not have to be switchedon.Copy media filesTo copy or transfer media files from your device toanother compatible device, such as a UPnPcompatible PC, select a file in Gallery and Options >Move and copy > Copy to home network orMove to home net.. Content sharing does not haveto be switched on.83Gallery
To copy or transfer files from the other device toyour device, select a file in the other device and thedesired copying option from the options list.Content sharing does not have to be switched on.84Gallery
Positioning (GPS)About GPSThe Global Positioning System (GPS) is a worldwideradio navigation system that includes 24 satellitesand their ground stations that monitor theoperation of the satellites. Your device has aninternal GPS receiver.A GPS terminal receives low-power radio signalsfrom the satellites and measures the travel time ofthe signals. From the travel time, the GPS receivercan calculate its location to the accuracy of meters.The coordinates in the GPS are expressed in degreesand decimal degrees format using the internationalWGS-84 coordinate system.The Global Positioning System (GPS) is operated bythe government of the United States, which is solelyresponsible for its accuracy and maintenance. Theaccuracy of location data can be affected byadjustments to GPS satellites made by the UnitedStates government and is subject to change withthe United States Department of Defense civil GPSpolicy and the Federal Radionavigation Plan.Accuracy can also be affected by poor satellitegeometry. Availability and quality of GPS signalsmay be affected by your location, buildings, naturalobstacles, and weather conditions. The GPS receivershould only be used outdoors to allow reception ofGPS signals.Any GPS should not be used for precise locationmeasurement, and you should never rely solely onlocation data from the GPS receiver and cellularradio networks for positioning or navigation.Your device also supports Assisted GPS (A-GPS).Assisted GPS (A-GPS) is used to retrieve assistancedata over a packet data connection, which assists incalculating the coordinates of your current locationwhen your device is receiving signals fromsatellites.A-GPS is a network service.Your device is preconfigured to use the Nokia A-GPSservice, if no service provider specific A-GPS settingsare available. The assistance data is retrieved fromthe Nokia A-GPS service server only when needed.You must have a packet data internet access pointdefined in the device to retrieve assistance datafrom the Nokia A-GPS service. To define an accesspoint for A-GPS, press , and select Tools >Settings > General > Positioning >Positioning server > Access point. A wireless LAN85Positioning (GPS)
access point cannot be used for this service. Thepacket data internet access point is asked when GPSis used for the first time in your device.To enable or disable different positioning methods,such as Bluetooth GPS, press , and select Tools >Settings > General > Positioning >Positioning methods.GPS receiverThe GPS receiver is located in the bottom of thedevice. When using the receiver, slide the numerickeypad open, and from an upright position, movethe device to an angle of about 45 degrees, with anunobstructed view of the sky. Do not cover thenumeric keypad with your hand.Establishing a GPSconnection may takefrom a couple ofseconds to severalminutes. Establishinga GPS connection inthe car may takelonger.The GPS receiverdraws its power from the device battery. Using theGPS receiver may drain the battery faster.About satellite signalsIf your device cannot find the satellite signal,consider the following:●If you are indoors, go outdoors to receive a bettersignal.●If the numeric keypad slide is closed, open it.●If you are outdoors, move to a more open space.●Ensure thatyour hand doesnot cover theGPS antenna ofyour device.See "GPSreceiver", p. 86.●If the weatherconditions are bad, the signal strength may beaffected.●If the power saver turns on while the device isattempting to establish a GPS connection, theattempt is interrupted.●Establishing a GPS connection may take from acouple of seconds to several minutes.Satellite statusTo check how many satellites your device has found,and whether your device is receiving satellite86Positioning (GPS)
signals, press , and select Tools >Connectivity > GPS data > Position >Options > Satellite status. Or, in the Mapsapplication, select Options > Map options >Satellite info.If your device has foundsatellites, a bar for eachsatellite is shown in thesatellite info view. Thelonger the bar, thestronger the satellitesignal. When your devicehas received enough datafrom the satellite signal tocalculate the coordinatesof your location, the barturns black.Initially your device mustreceive signals from atleast four satellites to beable to calculate thecoordinates of yourlocation. When the initialcalculation has been made,it may be possible tocontinue calculating thecoordinates of your location with three satellites.However, the accuracy is generally better whenmore satellites are found.Position requestsYou may receive a request from a network serviceto receive your position information. Serviceproviders may offer information about local topics,such as weather or traffic conditions, based on thelocation of your device.When you receive a position request, a message isdisplayed showing the service that is making therequest. Select Accept to allow your positioninformation to be sent or Reject to deny therequest.MapsAbout MapsPress , and select Maps.With Maps, you can see your current location on themap, browse maps for different cities and countries,search for addresses and different points of interest,plan routes from one location to another, and savelocations as landmarks and send them tocompatible devices.You can also purchase extra services, such as guidesand a turn-by-turn navigation service with voiceguidance.Maps uses GPS. You can define the positioningmethods used with your device in the device87Positioning (GPS)
settings. See "Positioning settings", p. 145. For themost accurate location information, use either theinternal GPS or a compatible external GPS receiver.When you use Maps for the first time, you may needto define an internet access point for downloadingmap information for your current location. Tochange the default access point later, selectOptions > Settings > Network > Defaultaccess point.Almost all digital cartography is inaccurate andincomplete to some extent. Never rely solely on thecartography provided for use in this device.Downloading maps may involve the transmission oflarge amounts of data through your serviceprovider's network. Contact your service providerfor information about data transmission charges.Tip: You can also download maps by using awireless LAN connection or through theinternet using Nokia Map Loader PC software.See "Download maps", p. 89.To receive a note when your device registers to anetwork outside your home cellular network, selectOptions > Settings > Network > Roamingwarning > On. Contact your network serviceprovider for details and roaming costs.Browse mapsThe map coverage varies by country.When you open the Maps application, Maps zoomsin to the location that was saved from your lastsession. If no position was saved from the lastsession, the Maps application zooms in to thecapital city of the country you are in based on theinformation the device receives from the cellularnetwork. At the same time, the map of the locationis downloaded, if it has not been downloadedduring previous sessions.To establish a GPS connection and zoom in to yourcurrent location, select Options > Find place >GPS position [0], or press 0A GPS indicator is shown on the display whenyou browse maps. When the device tries toestablish a GPS connection, the circles are yellow.When the device receives enough data from thesatellites to calculate the coordinates of yourcurrent location, the circles turn green.To view information about satellites when you areusing Maps, select Options > Map options >Satellite info.Your current location is indicated on the map with.88Positioning (GPS)
To move on the map, scrollup, down, left, or right.To zoom in or out, press *or #.To switch between the 2Dand 3D views, selectOptions > Mapoptions > 2D/3D.To find a location, selectOptions > Find place.You can choose to go toyour GPS position, find an address, find a point ofinterest by entering a keyword, find locationsnearby, or browse a guide (extra service).To use a location on the map, for example, as astarting point for a nearby search, to plan a route,view its details, or start navigation (extra service),press the scroll key, and select the desired option.When you browse the map on the display, forexample, move to another country, a new map isdownloaded automatically. These downloadedmaps are free of charge, but downloading mayinvolve the transmission of large amounts of datathrough your service provider's network. For moreinformation on data transmission charges, contactyour service provider.The maps are automatically saved in the devicememory.To define what kinds of points of interest are shownon the map, select Options > Map options >Categories and the desired categories.To save a location as a landmark, in the desiredlocation, press the scroll key, select Save > Aslandmark, enter a name for the landmark, andselect the categories you want to include it in. Totake a screen shot of your location, select Save >As image. The screen shot is saved in Gallery. Tosend the screen shot, in Gallery, select the screenshot, and from the active toolbar.To view saved landmarks, select Options > Findplace > Landmark.To send a landmark to a compatible device, in thelandmarks view, press the scroll key, and selectSend. If you send the landmark in a text message,the information is converted to plain text.To adjust the network, routing, and generalsettings, select Options > Settings.Download mapsWhen you browse the map on the display, forexample, move to another country, a new map isdownloaded automatically. These downloadedmaps are free of charge, but downloading may89Positioning (GPS)
involve transmission of large amounts of datathrough your service provider's network. For moreinformation on data transmission charges, contactyour service provider.You can view the amount of transferred data fromthe data counter (kB) shown on the display. Thecounter shows the amount of network traffic whenyou browse maps, create routes, or search forlocations online.To prevent the device from automaticallydownloading maps through the internet, forexample, when you are outside your home cellularnetwork, select Options > Settings > Network >Use network > Never.To define how much of the mass memory you wantto use for saving maps data or voice guidance files,select Options > Settings > Network > Max.mass mem. use (%). When the memory is full, theoldest map data is deleted. The saved maps data canbe deleted using Nokia Map Loader PC software.Nokia Map LoaderNokia Map Loader is PC software that you can use todownload and install maps for different countriesto your device from the internet. You can also use itto download voice files for turn-by-turn navigation.To use Nokia Map Loader, you must first install it toa compatible PC. You can download the PC softwarefrom the internet at www.nokia.com/maps. Followthe instructions on the screen.You must use the Maps application before usingNokia Map Loader. Nokia Map Loader uses the Mapshistory information to check the version of mapdata to be downloaded.After you have installed the PC software to your PC,to download maps, do the following:1. Connect your device to the PC by using acompatible USB data cable. Select Datatransfer as the USB connection mode.2. Open Nokia Map Loader in your PC. Nokia MapLoader checks the version of map data to bedownloaded.3. Select the maps or voice guidance files you want,and download and install them to your device.Find a placeTo view points of interest near your current locationor other locations on the map, select Options >Find place > Nearby and a category.To search for a point of interest by name, selectOptions > Find place > Keyword search or startentering the first letters of the name, and selectFind.To search for a location by address, selectOptions > Find place > By address. You must90Positioning (GPS)
enter the city and country. To use an address youhave saved to a contact card in Contacts, selectOptions > Find place > By address > Options >Select from contacts.To view a search result on the map, press the scrollkey, and select Show on map. To return to theresults list, select Back.To view a list of your previous locations, selectOptions > Find place > Recent.Plan a routeTo plan a route from one location to another (forexample, from your home to your office), do thefollowing:1. Scroll to a point on the map, press the scroll key,and select Route from.2. Scroll to From, and select Options > Select andthe desired option.To adjust the routing settings, such as the modeof transportation, select Options > Settings >Routing.3. To select the destination, scroll to To, and selectOptions > Select and the desired option.4. To view the route itinerary, select Options >Show route. The route is calculated using theselected routing settings.To view the itinerary route on the map, selectOptions > Show on map.To run a simulation of the route, select Options >Start simulation.Tip: You can also use a compatible GPSreceiver with Bluetooth connectivity withMaps. For example, in a car, an external GPSreceiver can be positioned so that it has aclear view of the sky. Enable the use of anexternal GPS receiver in positioning settings.See "Positioning settings", p. 145.Extra services for MapsYou can purchase and download different kinds ofguides, such as city and travel guides, for differentcities to your device. You can also purchase a turn-by-turn navigation service with voice guidance touse it in Maps.The downloaded guides are automatically saved toyour device.The licence you purchase for a guide or navigationis device-specific and cannot be transferred fromyour device to another device.NavigationTo purchase a navigation service with voiceguidance to use in Maps, select Options > Extraservices > Add navigation.91Positioning (GPS)
After purchasing the navigation upgrade, theservice is available through Maps.After creating a route in Maps, to start navigation tothe desired destination with GPS using voiceguidance, select Options > Start navigation. See"Plan a route", p. 91. You can also start navigationby selecting any location on the map or in a resultslist, and Navigate to.When you use navigation for the first time, you areprompted to select the language of the voiceguidance and download the voice guidance files ofthe selected language. You can also download voiceguidance files using Nokia Map Loader. See"Download maps", p. 89. To change the languagelater, in the Maps main view, select Options >Settings > General > Voice guidance and alanguage, and download the voice guidance filesfor the selected language.To discard the created route and use another route,select Options > Alternative route.To view only the next turns and hide the map, selectOptions > Map options > Arrow mode.To stop navigation, select Options > Stopnavigation.GuidesTo purchase and download different kinds ofguides, such as city and travel guides, for differentcities to your device, select Options > Extraservices > Guides.The guides provide information about attractions,restaurants, hotels, and other points of interest. Theguides must be downloaded and purchased beforeuse.To browse a downloaded guide, on the My guidestab in Guides, select a guide and a subcategory (ifavailable).To download a new guide to your device, in Guides,scroll right to the Nearest guides or All guides tab,select the desired guide, and press Yes. Thepurchase process starts automatically. You can payfor the guides through a credit card or have theamount charged to your phone bill (if supported byyour cellular network service provider).To confirm the purchase, select OK twice. To receivea confirmation of the purchase through e-mail,enter your name and e-mail address, and selectOK.LandmarksPress , and select Tools > Connectivity >Landmarks.With Landmarks, you can save the positioninformation of specific locations in your device. Youcan sort the saved locations into different92Positioning (GPS)
categories, such as business, and add otherinformation to them, such as addresses. You can useyour saved landmarks in compatible applications,such as GPS data and Maps.GPS coordinates are expressed in degrees anddecimal degrees format using the internationalWGS-84 coordinate system.To create a new landmark, select Options > Newlandmark. To make a positioning request for yourcurrent location, select Current position. To enterthe position information manually, select Entermanually.To edit or add information to a saved landmark (forexample, a street address), scroll to a landmark, andselect Options > Edit. Scroll to the desired field,and enter the information.To view the landmark on the map, select Options >Show on map. To create a route to the location,select Options > Navigate using map.You can sort your landmarks into preset categories,and create new categories. To edit and create newlandmark categories, scroll right in Landmarks, andselect Options > Edit categories.To add a landmark to a category, scroll to thelandmark in Landmarks, and select Options > Addto category. Scroll to each category to which youwant to add the landmark, and select it.To send one or several landmarks to a compatibledevice, select Options > Send. Your receivedlandmarks are placed in the Inbox folder inMessaging.GPS dataGPS data is designed to provide route guidanceinformation to a selected destination, positioninformation about your current location, andtraveling information, such as the approximatedistance to the destination and approximateduration of travel.Press , and select Tools > Connectivity > GPSdata.The coordinates in the GPS are expressed in degreesand decimal degrees format using the internationalWGS-84 coordinate system.To use GPS data, the GPS receiver of your devicemust initially receive position information from atleast four satellites to calculate the coordinates ofyour location. When the initial calculation has beenmade, it may be possible to continue calculating thecoordinates of your location with three satellites.However, the accuracy is generally better whenmore satellites are found.93Positioning (GPS)
Route guidancePress , and select Tools > Connectivity > GPSdata > Navigation.Start the route guidance outdoors. If startedindoors, the GPS receiver may not receive thenecessary information from the satellites.Route guidance uses a rotating compass on thedevice display. A red ball shows the direction to thedestination, and the approximate distance to it isshown inside the compass ring.Route guidance is designed to show the straightestroute and the shortest distance to the destination,measured in a straight line. Any obstacles on theroute, such as buildings and natural obstacles, areignored. Differences in altitude are not taken intoaccount when calculating the distance. Routeguidance is active only when you move.To set your trip destination, select Options > Setdestination and a landmark as the destination, orenter the latitude and longitude coordinates. SelectStop navigation to clear the destination set foryour trip.Retrieve position informationPress , and select Tools > Connectivity > GPSdata > Position.In the position view, you can view the positioninformation of your current location. An estimate ofthe accuracy of the location is displayed.To save your current location as a landmark, selectOptions > Save position. Landmarks are savedlocations with more information, and they can beused in other compatible applications andtransferred between compatible devices.Trip meterPress , and select Tools > Connectivity > GPSdata > Trip distance.Select Options > Start to activate trip distancecalculation, and Stop to deactivate it. Thecalculated values remain on the display. Use thisfeature outdoors to receive a better GPS signal.Select Reset to set the trip distance and time andaverage and maximum speeds to zero, and to starta new calculation. Select Restart to set theodometer and total time to zero.The trip meter has limited accuracy, and roundingerrors may occur. Accuracy can also be affected byavailability and quality of GPS signals.94Positioning (GPS)
Personalise your deviceYou can personalise your device by changing thestandby mode, main menu, tones, themes, or fontsize. Most of the personalisation options, such aschanging the font size, can be accessed through thedevice settings. See "Personalisationsettings", p. 141.ThemesPress , and select Tools > Settings >General > Personalization > Themes.You can change the look of the display, such as thewallpaper and icons.To change the theme that is used for all theapplications in your device, select General.To preview a theme before activating it, selectOptions > Preview. To activate the theme, selectOptions > Set. The active theme is indicated by.The themes in the mass memory of your device areindicated by .To cha nge t he la yout of th e ma in me nu, se lec t Menuview.To open a browser connection and download morethemes, in General or Menu view, selectDownload themes (network service).Important: Use only services that you trustand that offer adequate security and protectionagainst harmful software.To edit the wallpaper and power saver of thecurrent theme that appear in the standby mode,select Wallpaper to change the background imageor Power saver to change the power saver.Profiles—set tonesPress , and select Tools > Profiles.You can set and customise the ringing tones,message alert tones, and other tones for differentevents, environments, or caller groups.To change the profile, select a profile, andOptions > Activate. To also change the profile,press the power key in the standby mode. Scroll tothe profile you want to activate, and select OK.95Personalise your device
Tip: To switch between the general and silentprofiles in the standby mode, press and hold#.To modify a profile, scroll to the profile, and selectOptions > Customize. Scroll to the setting youwant to change, and press the scroll key to open thechoices. Tones stored in the mass memory of yourdevice are indicated with .In the tones list, select Download sounds (networkservice) to open a list of bookmarks. You can selecta bookmark and start connection to a web page todownload more tones.If you want the caller’s name to be spoken whenyour device rings, select Options > Customize,and set Say caller's name to On. The caller’s namemust be saved in Contacts.To create a new profile, select Options > Createnew.3-D tonesPress , select Tools > Utilities > 3-D tones.With 3-D tones, you can enable three-dimensionalsound effects for ringing tones. Not all ringing tonessupport 3-D effects.To enable the 3-D effects, select 3-D ringing toneeffects > On. To change the ringing tone, selectRinging tone and the desired ringing tone.To change the 3-D effect that is applied to theringing tone, select Sound trajectory and thedesired effect.To modify the effect, select from the followingsettings:●Trajectory speed — Scroll left or right to adjustthe speed at which sound moves from onedirection to another. This setting is not availablefor all ringing tones.●Reverberation — Select the type of echo.●Doppler effect — Select On to have the ringingtone sound louder when you are closer to yourdevice, and softer when you are farther away.When you get closer to the device, the ringingtone appears to become louder, and softer whenyou move away from it. This setting is notavailable for all ringing tones.To listen to the ringing tone with the 3-D effect,select Options > Play tone. If you enable the 3-Dtones but do not select any 3-D effect, stereowidening is applied to the ringing tone.To adjust the ringing tone volume, select Tools >Profiles > Options > Customize > Ringingvolume.96Personalise your device
Modify the standby modeTo switch the active standby on or off, press , andselect Tools > Settings > General >Personalization > Standby mode > Activestandby. The active standby display showsapplication shortcuts, andevents from applicationssuch as calendar andplayer.To change the selectionkey shortcuts or thedefault shortcut icons inthe active standby mode,select Tools > Settings >General >Personalization >Standby mode. Someshortcuts may be fixed, and you cannot changethem.To change the clock shown in the standby mode,press , and select Applications > Clock >Options > Settings > Clock type. You can also change the standby mode backgroundimage or what is shown in the power saver. See"Themes", p. 95.Modify the main menuTo change the main menu view, in the main menu,select Options > Change Menu view > Grid orList.To rearrange the main menu, in the main menu,select Options > Move, Move to folder, or Newfolder. You can move less used applications intofolders and place applications that you use moreoften into the main menu.To use animated icons in your device, in the mainmenu, select Options > Icon animation > On.97Personalise your device
Time managementClock Alarm clockPress , and select Applications > Clock.To set a new quick alarm, select Options > Newquick alarm. Quick alarms are set for the next 24hours and they cannot be repeated.To view your active and inactive alarms, scroll rightto the alarm tab. To set a new alarm, selectOptions > New alarm. Define the repetition, ifneeded. When an alarm is active, is shown.To turn off the sounding alarm, select Stop. To stopthe alarm for 5 minutes, select Snooze.If the alarm time is reached while the device isswitched off, the device switches itself on and startssounding the alarm tone. If you select Stop, thedevice asks whether you want to activate the devicefor calls. Select No to switch off the device or Yes tomake and receive calls. Do not select Yes whenwireless phone use may cause interference ordanger.To cancel an alarm, select Options > Removealarm.To change the time, date, and clock type settings,select Options > Settings.To allow the mobile phone network to update thetime, date, and time zone information to yourdevice (network service), in the settings, selectNetwork operator time > Auto-update.World clockPress , and select Applications > Clock.To open the world clock view, scroll right to theworld clock tab. In the world clock view, you canview the time in different cities. To add cities to thelist, select Options > Add city. You can add amaximum of 15 cities to the list.To set your current city, scroll to a city, and selectOptions > Set as current city. The city is displayedin the clock main view, and the time in your deviceis changed according to the city selected. Ensurethat the time is correct and matches your time zone.98Time management
CalendarCreate a calendar entryPress , and select Applications > Calendar.1. To add a new calendarentry, scroll to thedesired date, and selectOptions > Newentry and one of thefollowing:●Meeting — toremind you of anappointment thathas a specific dateand time●Memo — to write ageneral entry for a day●Anniversary — to remind you of birthdays orspecial dates (entries are repeated annually)●To-do — to remind you of a task that must bedone by a specific date2. Fill in the fields. To set an alarm, select Alarm >On, and enter the alarm time and date.To add a description for an entry, selectOptions > Add description.3. To save the entry, select Done.Tip: In the day, week, or month calendarview, press any key (1-0). An appointmententry opens, and the characters you enter areadded to the subject field. In the to-do view,a to-do note entry opens.When the calendar alarm sounds for a note, selectSilence to turn off the calendar alarm tone. Thereminder text stays on the screen. To stop thecalendar alarm, select Stop. To set the alarm tosnooze, select Snooze.Calendar viewsTo change the starting day of the week or the viewthat is shown when you open the calendar, selectOptions > Settings.To go to a certain date, select Options > Go todate. To jump to today, press #.To switch between the month view, week view, dayview, and to-do view, press *.To send a calendar note to a compatible device,select Options > Send.If the other device is not compatible withCoordinated Universal Time (UTC), the timeinformation of received calendar entries may not bedisplayed correctly.99Time management
To modify the calendar, select Options >Settings > Calendar alarm tone, Default view,Week starts on, or Week view title.Manage calendar entriesTo delete several events at a time, go to the monthview, and select Options > Delete entry > Beforedate or All entries.To mark a task as completed, scroll to it in the to-doview, and select Options > Mark as done.You can synchronise your calendar with acompatible PC using Nokia Nseries PC Suite. Whencreating a calendar entry, set the desiredsynchronisation option.100Time management
MessagingOnly devices that have compatible features canreceive and display multimedia messages. Theappearance of a message may vary depending onthe receiving device.Messaging main viewPress , and select Messaging (network service).To create a new message, select New message.Messaging contains the following folders:● Inbox — Received messages, except e-mailand cell broadcast messages, are stored here.● My folders — Organise your messages intofolders.Tip: To avoid rewriting messages that yousend often, use texts in the Templates folderin My folders. You can also create and saveyour own templates.● Mailbox — Connect to your remote mailboxto retrieve your new e-mail messages, or viewyour previously retrieved e-mail messagesoffline.● Drafts — Draft messages that have not beensent are stored here.● Sent — The last messages that have beensent, excluding messages sent using Bluetoothconnectivity or infrared, are stored here. You canchange the number of messages to save in thisfolder.● Outbox — Messages waiting to be sent aretemporarily stored in the outbox, for example,when your device is outside network coverage.● Reports — You can request the network tosend you a delivery report of the text messagesand multimedia messages you have sent(network service).To enter and send service requests (also known asUSSD commands), such as activation commands fornetwork services, to your service provider, selectOptions > Service command in the Messagingmain view.Cell broadcast (network service) allows you toreceive messages on various topics, such asweather or traffic conditions, from your serviceprovider. For available topics and relevant topicnumbers, contact your service provider. In the101Messaging
Messaging main view, select Options > Cellbroadcast.Cell broadcast messages cannot be received in UMTSnetworks. A packet data connection may preventcell broadcast reception.Write textYour device supports traditional text input andpredictive text input. With predictive text, you canenter any letter with a single keypress. Predictivetext input is based on a built-in dictionary to whichyou can add new words.When you write text, is displayed when youwrite text using traditional text input and when using predictive text input.Traditional text inputPress a number key (1–9) repeatedly until thedesired character appears. There are morecharacters available for a number key than areprinted on the key.If the next letter is located on the same key as thepresent one, wait until the cursor appears (or scrollright to end the time-out period), and enter theletter.To insert a space, press 0. To move the cursor to thenext line, press 0 three times.Predictive text inputWith predictive input, you can enter any letter witha single keypress. Predictive text input is based ona built-in dictionary to which you can add newwords.1. To activate predictive text input for all editors inthe device, press , and select Activatepredictive text.2. To write the desired word, press the keys 2–9.Press each key only once for one letter. Forexample, to write "Nokia" when the Englishdictionary is selected, press 6 for N, 6 for o, 5 fork, 4 for i, and 2 for a.The word suggestion changes after eachkeypress.3. When you finish writing the word correctly,scroll right to confirm it, or press 0 to add aspace.If the word is not correct, press * repeatedly toview the matching words the dictionary hasfound one by one, or press , and selectPredictive text > Matches.If the ? character is shown after the word, theword is not in the dictionary. To add a word tothe dictionary, select Spell, enter the word usingtraditional text input, and select OK. The word isadded to the dictionary. When the dictionary isfull, a new word replaces the oldest added word.102Messaging
4. Start writing the next word.To turn predictive text input off for all editors in thedevice, press , and select Predictive text > Off.Tips on text inputTo insert a number in the letter mode, press andhold the desired number key.To switch between the letter and number mode,press and hold #.To switch between the different character modes,press #.To delete a character, press C. To delete more thanone character, press and hold C.The most common punctuation marks are availableunder 1. To scroll them through one by one, press1, and then * repeatedly.To open a list of special characters, press *.Tip: To select several special characters fromthe special characters list, press 5 after eachhighlighted character.Change the writing languageWhen you are writing text, you can change thewriting language. For example, if you are writingtext using a non-Latin alphabet and want to writeLatin characters, such as e-mail or web addresses,you may need to change the writing language.To change the writing language, select Options >Writing language and a writing language thatuses Latin characters.After changing the writing language, for example,if you press 6 repeatedly to reach a specificcharacter, changing the writing language gives youaccess to characters in a different order.Edit text and listsTo copy and paste text, while pressing and holding, scroll left or right to highlight text. To copy thetext to the clipboard, while still holding , selectCopy. To insert the text into a document, press andhold , and select Paste.To mark an item in a list, scroll to it, and press and the scroll key at the same time.To mark multiple items in a list, press and hold while you scroll up or down. To end the selection,stop scrolling, and release .Write and send messagesPress , and select Messaging.Before you can create a multimedia message orwrite an e-mail, you must have the correct103Messaging
connection settings in place. See "Define the e-mailsettings", p. 106.The wireless network may limit the size of MMSmessages. If the inserted picture exceeds this limit,the device may make it smaller so that it can be sentby MMS.Check the size limit of e-mail messages with yourservice provider. If you attempt to send an e-mailmessage that exceeds the size limit of the e-mailserver, the message is left in the Outbox folder, andthe device attempts to resend it periodically.Sending an e-mail requires a data connection, andcontinuous attemps to resend the e-mail mayincrease your phone bill. In the Outbox folder, youcan delete such a message or move it to theDrafts folder.1. Select New message > Text message to senda text message, Multimedia message to send amultimedia message (MMS), Audio message tosend an audio message (a multimedia messagethat includes one sound clip), or E-mail to sendan e-mail.2. In the To field, press thescroll key to selectrecipients or groupsfrom contacts, or enterthe recipient’s phonenumber or e-mailaddress. To add asemicolon (;) thatseparates therecipients, press *. Youcan also copy and pastethe number or addressfrom the clipboard.3. In the Subject field, enter the subject of themultimedia message or e-mail. To change thefields that are visible, select Options > Addressfields.4. In the message field, write the message. Toinsert a template, select Options > Insert orInsert object > Template.5. To add a media object to a multimedia message,select Options > Insert object > Image,Sound clip, or Video clip.6. To take a new picture or record sound or videofor a multimedia message, select Insert new >Image, Sound clip, or Video clip.To insert a new slide to the message, selectSlide.104Messaging
To see what the multimedia message looks like,select Options > Preview.7. To add an attachment to an e-mail, selectOptions > Insert > Image, Sound clip, Videoclip, Note, or Other for other file types. E-mailattachments are indicated by .8. To send the message, select Options > Send,or press the call key.Note: Your device may indicate that yourmessage was sent to the message center numberprogrammed into your device. Your device may notindicate whether the message is received at theintended destination. For more details aboutmessaging services, contact your service provider.Your device supports the sending of text messagesbeyond the character limit for a single message.Longer messages are sent as a series of two or moremessages. Your service provider may chargeaccordingly. Characters that use accents or othermarks, and characters from some language options,take up more space, limiting the number ofcharacters that can be sent in a single message.You may not be able to send video clips that aresaved in the .mp4 format or that exceed the sizelimit of the wireless network in a multimediamessage.Tip: You can combine images, video, sound,and text to a presentation and send it in amultimedia message. Start to create amultimedia message, and select Options >Create presentation. The option is shownonly if MMS creation mode is set to Guidedor Free. See "Multimedia messagesettings", p. 109.Messaging inboxReceive messagesPress , and select Messaging > Inbox.In the Inbox folder, indicates an unread textmessage, an unread multimedia message, anunread audio message, data received throughinfrared, and data received through Bluetoothconnectivity.When you receive a message, and 1 newmessage are shown in the standby mode. To openthe message, select Show. To open a message inInbox, scroll to it, and press the scroll key. To replyto a received message, select Options > Reply.105Messaging
Multimedia messagesImportant: Exercise caution when openingmessages. Multimedia message objects maycontain malicious software or otherwise be harmfulto your device or PC.You may receive a notification that a multimediamessage is waiting in the multimedia messagecentre. To start a packet data connection to retrievethe message to your device, select Options >Retrieve.When you open a multimedia message ( ), youmay see an image and a message. is shown ifsound is included, or if video is included. To playthe sound or the video, select the indicator.To see the media objects that have been includedin the multimedia message, select Options >Objects.If the message includes a multimedia presentation, is displayed. To play the presentation, select theindicator.Data, settings, and web servicemessagesYour device can receive many kinds of messagesthat contain data, such as business cards, ringingtones, operator logos, calendar entries, and e-mailnotifications. You may also receive settings fromyour service provider or company informationmanagement department in a configurationmessage.To save the data from the message, selectOptions and the corresponding option.Web service messages are notifications (forexample, news headlines) and may contain a textmessage or a link. For availability and subscription,contact your service provider.MailboxDefine the e-mail settingsTip: Use Settings wizard to define yourmailbox settings. Press , and select Tools >Utilities > Sett. wizard.To use e-mail, you must have a valid internet accesspoint (IAP) in the device and define your e-mailsettings correctly. See "Access points", p. 149. See"E-mail settings", p. 110.You must have a separate e-mail account. Followthe instructions given by your remote mailbox andinternet service provider (ISP).If you select Mailbox in the Messaging main viewand have not set up your e-mail account, you are106Messaging
prompted to do so. To start creating the e-mailsettings with the mailbox guide, select Start.When you create a new mailbox, the name you giveto the mailbox replaces Mailbox in the Messagingmain view. You can have up to six mailboxes.Open the mailboxPress , and select Messaging and a mailbox.When you open the mailbox, the device asks if youwant to connect to the mailbox (Connect tomailbox?).To connect to your mailbox and retrieve new e-mailheadings or messages, select Yes. When you viewmessages online, you are continuously connectedto a remote mailbox using a data connection.To view previously retrieved e-mail messagesoffline, select No.To create a new e-mail message, select Newmessage > E-mail in the Messaging main view orOptions > Create message > E-mail in yourmailbox. See "Write and send messages", p. 103.Retrieve e-mail messagesPress , and select Messaging and a mailbox.If you are offline, select Options > Connect to starta connection to the remote mailbox.Important: Exercise caution when openingmessages. E-mail messages may contain malicioussoftware or otherwise be harmful to your device orPC.1. When you have an open connection to a remotemailbox, select Options > Retrieve e-mail >New to retrieve all new messages, Selected toretrieve only the messages that have beenmarked, or All to retrieve all messages from themailbox.To stop retrieving messages, select Cancel.2. To close the connection and view the e-mailmessages offline, select Options >Disconnect.3. To open an e-mail message, press the scroll key.If the e-mail message has not been retrieved andyou are offline, you are asked if you want toretrieve this message from the mailbox.To view e-mail attachments, open the message, andselect the attachment field indicated by . If theattachment has a dimmed indicator, it has not beenretrieved to the device; select Options >Retrieve.To retrieve e-mail messages automatically, selectOptions > E-mail settings > Automaticretrieval. See "Automatic retrievalsettings", p. 112.107Messaging
Setting the device to retrieve e-mail automaticallymay involve the transmission of large amounts ofdata through your service provider's network.Contact your service provider for information aboutdata transmission charges.Delete e-mail messagesPress , and select Messaging and a mailbox.To delete the contents of an e-mail message fromthe device while still retaining it in the remotemailbox, select Options > Delete. In Deletemessage from:, select Phone only.The device mirrors the e-mail headings in theremote mailbox. Although you delete the messagecontent, the e-mail heading stays in your device. Ifyou want to remove the heading as well, you mustfirst delete the e-mail message from your remotemailbox, then make a connection from your deviceto the remote mailbox again to update the status.To delete an e-mail from the device and the remotemailbox, select Options > Delete > Phone andserver.To cancel deleting an e-mail from the device andserver, scroll to an e-mail that has been marked tobe deleted during the next connection , andselect Options > Restore.Disconnect from the mailboxWhen you are online, to end the data connection tothe remote mailbox, select Options >Disconnect.View messages on a SIM cardPress , and select Messaging.Before you can view SIM messages, you must copythem to a folder in your device.1. In the Messaging main view, select Options >SIM messages.2. Select Options > Mark/Unmark > Mark orMark all to mark messages.3. Select Options > Copy. A list of folders opens.4. To start copying, select a folder and OK. To viewthe messages, open the folder.Messaging settingsThe settings may be preconfigured in your device,or you may receive them in a message. To entersettings manually, fill in all fields marked with Mustbe defined or an asterisk.Some or all message centres or access points maybe preset for your device by your service provider,108Messaging
and you may not be able to change, create, edit, orremove them.Text message settingsPress , and select Messaging > Options >Settings > Text message.Select from the following:●Message centers — View a list of all textmessage centres that have been defined.●Message center in use — Select which messagecentre to use to deliver text messages.●Character encoding — To use characterconversion to another encoding system whenavailable, select Reduced support.●Receive report — Select whether the networksends delivery reports on your messages(network service).●Message validity — Select how long themessage centre resends your message if the firstattempt fails (network service). If the messagecannot be sent within the validity period, themessage is deleted from the message centre.●Message sent as — Contact your serviceprovider to learn if your message centre is ableto convert text messages into these otherformats.●Preferred connection — Select the connectionto use.●Reply via same center — Select whether youwant the reply message to be sent using thesame text message centre number (networkservice).Multimedia message settingsPress , and select Messaging > Options >Settings > Multimedia message.Select from the following:●Image size — Define the size of the image in amultimedia message.●MMS creation mode — If you select Guided, thedevice informs you if you try to send a messagethat may not be supported by the recipient. If youselect Restricted, the device prevents you fromsending messages that may not be supported. Toinclude content in your messages withoutnotifications, select Free.●Access point in use — Select which access pointis used as the preferred connection.●Multimedia retrieval — Select how you wantto receive messages. To receive messagesautomatically in your home cellular network,select Auto in home netw.. Outside your homecellular network, you receive a notification thatthere is a message to retrieve in the multimediamessage centre.109Messaging
Outside your home cellular network, sending andreceiving multimedia messages may cost you more.If you select Multimedia retrieval > Alwaysautomatic, your device automatically makes anactive packet data connection to retrieve themessage both in and outside your home cellularnetwork.●Allow anon. msgs. — Select whether you wantto reject messages from an anonymous sender.●Receive ads — Define whether you want toreceive multimedia message advertisements.●Receive report — Select whether you want thestatus of the sent message to be shown in the log(network service).●Deny report sending — Select whether youwant to deny your device sending deliveryreports of received messages.●Message validity — Select how long themessage centre resends your message if the firstattempt fails (network service). If the messagecannot be sent within the validity period, themessage is deleted from the message centre.E-mail settingsManage mailboxesPress , and select Messaging > Options >Settings > E-mail.To select which mailbox you want to use to send e-mail, select Mailbox in use and a mailbox.To remove a mailbox and its messages from yourdevice, select Mailboxes, scroll to the desiredmailbox, and press C.To create a new mailbox, in Mailboxes, selectOptions > New mailbox. The name you give tothe new mailbox replaces Mailbox in the Messagingmain view. You can have up to six mailboxes.Select Mailboxes and a mailbox to change theconnection settings, user settings, retrievalsettings, and automatic retrieval settings.Connection settingsPress , and select Messaging > Options >Settings > E-mail > Mailboxes, a mailbox, andConnection settings.To edit the settings for the e-mail you receive, selectIncoming e-mail, and from the following:●User name — Enter your user name given to youby your service provider.●Password — Enter your password. If you leavethis field blank, you are prompted for thepassword when you try to connect to yourremote mailbox.●Incoming mail server — Enter the IP addressor host name of the mail server that receives youre-mail.110Messaging
●Access point in use — Select an internet accesspoint (IAP). See "Access points", p. 149.●Mailbox name — Enter a name for the mailbox.●Mailbox type — Defines the e-mail protocol thatyour remote mailbox service providerrecommends. The options are POP3 and IMAP4.This setting cannot be changed.●Security (ports) — Select the security optionused to secure the connection to the remotemailbox.●Port — Define a port for the connection.●APOP secure login (for POP3 only) — Use withthe POP3 protocol to encrypt the sending ofpasswords to the remote e-mail server whileconnecting to the mailbox.To edit the settings for the e-mail you send, selectOutgoing e-mail and from the following:●My e-mail address — Enter the e-mail addressgiven to you by your service provider.●Outgoing mail server — Enter the IP address orhost name of the mail server that sends your e-mail. You may only be able to use the outgoingserver of your service provider. Contact yourservice provider for more information.The settings for User name, Password, Accesspoint in use, Security (ports), and Port are similarto the ones in Incoming e-mail.User settingsPress , and select Messaging > Options >Settings > E-mail > Mailboxes, a mailbox, andUser settings.Select from the following:●My name — Enter your own name. Your namereplaces your e-mail address in the recipient’sdevice when the recipient’s device supports thisfunction.●Send message — Define how e-mail is sent fromyour device. Select Immediately for the deviceto connect to the mailbox when you select Sendmessage. If you select During next conn., e-mail is sent when the connection to the remotemailbox is available.●Send copy to self — Select whether you wantto send a copy of the e-mail to your own mailbox.●Include signature — Select whether you wantto attach a signature to your e-mail messages.●New e-mail alerts — Select whether you wantto receive the new e-mail indications (a tone, anote, and a mail indicator) when new mail isreceived.Retrieval settingsPress , and select Messaging > Options >Settings > E-mail > Mailboxes, a mailbox, andRetrieval settings.Select from the following:111Messaging
●E-mail to retrieve — Define which parts of thee-mail are retrieved: Headers only, Size limit(POP3), or Msgs. & attachs. (POP3).●Retrieval amount — Define how many new e-mail messages are retrieved to the mailbox.●IMAP4 folder path (for IMAP4 only) — Definethe folder path for folders to be subscribed.●Folder subscriptions (for IMAP4 only) — Subscribe to other folders in the remotemailbox, and retrieve content from those folders.Automatic retrieval settingsPress , and select Messaging > Options >Settings > E-mail > Mailboxes, a mailbox, andAutomatic retrieval.Select from the following:●E-mail notifications — To automaticallyretrieve the headings to your device when youreceive new e-mail in your remote mailbox,select Auto-update or Only in home netw..●E-mail retrieval — To automatically retrieve theheadings of new e-mail messages from yourremote mailbox at defined times, selectEnabled or Only in home netw.. Define whenand how often the messages are retrieved.E-mail notifications and E-mail retrieval cannotbe active at the same time.Setting the device to retrieve e-mail automaticallymay involve the transmission of large amounts ofdata through your service provider's network.Contact your service provider for information aboutdata transmission charges.Web service message settingsPress , and select Messaging > Options >Settings > Service message.Select whether you want to receive servicemessages. If you want to set the device toautomatically activate the browser and start anetwork connection to retrieve content when youreceive a service message, select Downloadmessages > Automatically.Cell broadcast settingsCheck the available topics and related topicnumbers with your service provider.Press , and select Messaging > Options >Settings > Cell broadcast.Select from the following:●Reception — Select whether you want toreceive cell broadcast messages.●Language — Select the languages in which youwant to receive messages: All, Selected, orOther.●Topic detection — Select whether the deviceautomatically searches for new topic numbers,112Messaging
and saves the new numbers without a name tothe topic list.Other settingsPress , and select Messaging > Options >Settings > Other.Select from the following:●Save sent messages — Select whether youwant to save a copy of the text messages,multimedia messages, or e-mail that you send tothe Sent folder.●Number of saved msgs. — Define how manysent messages are saved to the sent folder at atime. When the limit is reached, the oldestmessage is deleted.●Memory in use — Select the memory where youwant to save your messages.113Messaging
Make callsVoice calls1. In the standby mode, enter the phone number,including the area code. To remove a number,press C.For international calls, press * twice for the +character (replaces the international accesscode), and enter the country code, area code(omit the leading zero if necessary), and phonenumber.2. Press the call key to call the number.3. Press the end key to end the call (or to cancel thecall attempt).Pressing the end key always ends a call, even ifanother application is active.To make a call from Contacts, press , and selectContacts. Scroll to the desired name, or enter thefirst letters of the name to the search field. Matchingcontacts are listed. To call, press the call key. If youhave saved several numbers for a contact, select thedesired number from the list.Options during a callTo adjust the volume during a call, use the volumekey on the side of your device. You can also use thescroll key. If you have set the volume to Mute, selectUnmute first.To send an image or a video clip in a multimediamessage to the other participant of the call, selectOptions > Send MMS (in UMTS networks only). Youcan edit the message and change the recipientbefore sending. Press the call key to send the file toa compatible device (network service).To put an active voice call on hold while answeringanother incoming call, select Options > Hold. Toswitch between the active and the held call, selectOptions > Swap.To send DTMF tone strings (for example, apassword), select Options > Send touch tones.Enter the DTMF string or search for it in Contacts. Toenter a wait character (w) or a pause character (p),press * repeatedly. To send the tone, select OK. Youcan add DTMF tones to the phone number or DTMFfields in a contact card.114Make calls
Tip: When you have only one active voice call,to put the call on hold, press the call key. Toactivate the call, press the call key again.During an active call, to route the sound from thehandset to the loudspeaker, select Options >Activate loudspeaker. If you have attached acompatible headset with Bluetooth connectivity, toroute the sound to the headset, select Options >Activate handsfree. To switch back to the handset,select Options > Activate handset.To end an active call and replace it by answering thewaiting call, select Options > Replace.If you have several calls active, to end them all,select Options > End all calls.Many of the options that you can use during a voicecall are network services.Voice and video mailboxesTo call your voice or video mailbox (networkservices, video mailbox available only in the UMTSnetwork), press and hold 1 in the standby mode,and select Voice mailbox or Video mailbox.To change the phone number of your voice or videomailbox, press , and select Tools > Utilities >Call mailbox, a mailbox, and Options > Changenumber. Enter the number (obtained from yournetwork service provider), and select OK.Answer or decline a callTo answer the call, press the call key, or open theslide.To mute the ringing tone of an incoming call, selectSilence. If you do not want to answer a call, press the endkey. If you activate the Call forwarding > Voicecalls > If busy function in phone settings toforward calls, declining an incoming call alsoforwards the call.When you select Silence to mute the ringing toneof an incoming call, you can send a text messagewithout rejecting the call, informing the caller thatyou cannot answer the call. Select Options > Sendtext message. To set up this option and write astandard text message, select Tools > Settings >Phone > Call > Reject call with SMS.Make a conference call1. Make a call to the first participant.2. To make a call to another participant, selectOptions > New call. The first call isautomatically put on hold.3. When the new call is answered, to join the firstparticipant in the conference call, selectOptions > Conference.115Make calls
To add a new person to the call, repeat step 2,and select Options > Conference > Add toconference. Your device supports conferencecalls between a maximum of six participants,including yourself.To have a private conversation with one of theparticipants, select Options > Conference >Private. Select a participant, and selectPrivate. The conference call is put on hold onyour device. The other participants can stillcontinue the conference call. After you finish theprivate conversation, select Options >Conference to return to the conference call.To drop a participant, select Options >Conference > Drop participant, scroll to theparticipant, and select Drop.4. To end the active conference call, press the endkey.1-touch dial a phone numberTo activate the feature, press , and select Tools >Settings > Phone > Call > 1-touch dialing.To assign a phone number to one of the numberkeys (2-9), press , and select Tools > Utilities >1-touch. Scroll to the key to which you want toassign the phone number, and select Options >Assign. 1 is reserved for the voice or video mailbox,and for starting the web browser.To call in the standby mode, press the assigned keyand the call key.Call waitingYou can answer a call while you have another call inprogress if you have activated call waiting inSettings > Phone > Call > Call waiting(network service).To answer the waiting call, press the call key. Thefirst call is put on hold.To switch between the two calls, select Swap. Toconnect an incoming call or a call on hold with anactive call and to disconnect yourself from the calls,select Options > Transfer. To end the active call,press the end key. To end both calls, selectOptions > End all calls. Voice diallingYour device supports enhanced voice commands.Enhanced voice commands are not dependent onthe speaker’s voice, so the user does not recordvoice tags in advance. Instead, the device creates avoice tag for the entries in contacts, and comparesthe spoken voice tag to it. The voice recognition in116Make calls
the device adapts to the main user’s voice torecognise the voice commands better.The voice tag for a contact is the name or nicknamethat is saved on the contact card. To listen to thesynthesised voice tag, open a contact card, andselect Options > Play voice tag.Make a call with a voice tagNote: Using voice tags may be difficult in anoisy environment or during an emergency, so youshould not rely solely upon voice dialing in allcircumstances.When you use voice dialling, the loudspeaker is inuse. Hold the device at a short distance away whenyou say the voice tag.1. To start voice dialling, in the standby mode,press and hold the right selection key. If acompatible headset with the headset key isattached, press and hold the headset key to startvoice dialling.2. A short tone is played, and Speak now isdisplayed. Say clearly the name or nickname thatis saved on the contact card.3. The device plays a synthesised voice tag for therecognised contact in the selected devicelanguage, and displays the name and number.After a timeout of 2.5 seconds, the device dialsthe number. If the recognised contact was notcorrect, select Next to view a list of othermatches or Quit to cancel voice dialling.If several numbers are saved under the name, thedevice selects the default number if it has been set.Otherwise the device selects the first availablenumber in a contact card.Make a video callWhen you make a video call (network service), youcan see a real-time, two-way video between youand the recipient of the call. The live video image,or video image captured by the camera in yourdevice is shown to the video call recipient.To be able to make a video call, you must have aUSIM card and be in the coverage of a UMTS network.For availability of and subscription to video callservices, contact your network service provider.A video call can only be made between two parties.The video call can be made to a compatible mobiledevice or an ISDN client. Video calls cannot be madewhile another voice, video, or data call is active.Icons You are not receiving video (the recipient is notsending video or the network is not transmitting it). You have denied video sending from yourdevice. To send a still image instead, select Tools >117Make calls
Settings > Phone > Call > Image in videocall.Even if you denied video sending during a video call,the call is still charged as a video call. Check thepricing with your service provider.1. To start a video call, enter the phone number inthe standby mode, or select Contacts and acontact.2. Select Options > Call > Video call.The secondary camera on the front is used bydefault for video calls. Starting a video call maytake a while. Waiting for video image isshown. If the call is not successful (for example,video calls are not supported by the network, orthe receiving device is not compatible), you areasked if you want to try a normal call or send atext or multimedia message instead.The video call is active when you see two videoimages, and hear the sound through theloudspeaker. The call recipient may deny videosending ( ), in which case you only hear thesound and may see a still image or a greybackground graphic.3. To end the video call, press the end key.Options during a video callTo change between showing video or hearing onlysound, select Options > Enable, or Disable andthe desired option.To zoom your image in or out, scroll up or down.To route the audio to a compatible headset withBluetooth connectivity attached to your device,select Options > Activate handsfree. To route theaudio back to the loudspeaker of your device, selectOptions > Activate handset.To adjust the volume during a video call, use thevolume key on the side of the device.To use the main camera to send video, selectOptions > Use main camera. To switch back tothe secondary camera, select Options > Usesecondary camera.Answer or decline a videocallWhen a video call arrives, is displayed.To answer the video call, press the call key. Allowvideo image to be sent to caller? is displayed. Tostart sending live video image, select Yes.If you do not activate the video call, video sendingis not activated, and you only hear the sound of the118Make calls
caller. A grey screen replaces the video image. Toreplace the grey screen with a still image capturedby the camera in your device, select Tools >Settings > Phone > Call > Image in videocall.To end the video call, press the end key.Video sharingUse video sharing (network service) to send livevideo or a video clip from your mobile device toanother compatible mobile device during a voicecall.The loudspeaker is active when you activate Videosharing. If you do not want to use the loudspeakerfor the voice call while you share video, you can alsouse a compatible headset.RequirementsVideo sharing requires a UMTS connection. Yourability to use video sharing depends on theavailability of the UMTS network. Contact yourservice provider for more information on the serviceand network availability and fees associated withusing this service.To use video sharing you must do the following:●Ensure that your device is set up for person-to-person connections.●Ensure you have an active UMTS connection andare within UMTS network coverage. If you startthe sharing session while you are within UMTSnetwork coverage and a hand over to GSM occurs,the sharing session is discontinued, but yourvoice call continues. You cannot start videosharing if you are not within UMTS networkcoverage.●Ensure that both the sender and recipient areregistered to the UMTS network. If you invitesomeone to a sharing session and the recipient’sdevice is not within UMTS network coverage,does not have video sharing installed, or person-to-person connections set up, the recipient doesnot know that you are sending an invitation. Youreceive an error message that indicates that therecipient cannot accept the invitation.SettingsTo set up video sharing, you need person-to-personand UMTS connection settings.Person-to-person connection settingsA person-to-person connection is also known as aSession Initiation Protocol (SIP) connection. The SIPprofile settings must be configured in your devicebefore you can use video sharing. Ask your serviceprovider for the SIP profile settings, and save themin your device. Your service provider may send you119Make calls
the settings over the air or give you a list of theneeded parameters.To add a SIP address to a contact card, do thefollowing:1. Press , and select Contacts.2. Open the contact card (or start a new card forthat person).3. Select Options > Add detail or Share view.4. Enter the SIP address in the formatusername@domainname (you can use an IPaddress instead of a domain name).If you do not know the SIP address for thecontact, you can use the phone number of therecipient, including the country code, to sharevideo (if supported by the network serviceprovider).UMTS connection settingsTo set up your UMTS connection, do the following:●Contact your service provider to establish anagreement for you to use the UMTS network.●Ensure that your device UMTS access pointconnection settings are configured properly.Share live video or video clips1. When a voice call is active, select Options >Share video > Live video.To share a video clip, select Options > Sharevideo > Recorded clip. A list of video clipssaved on the device memory or mass memoryopens. Select a clip you want to share. Topreview the clip, select Options > Play.2. If you share live video, your device sends theinvitation to the SIP address you have added tothe contact card of the recipient.If you share a video clip, select Options >Invite. You may need to convert the video clipinto a suitable format to be able to share it. Clipmust be converted for sharing. Continue?appears. Select OK.If the contact information of the recipient issaved in Contacts, and the contact has several SIPaddresses or phone numbers including thecountry code, select the desired address ornumber. If the SIP address or phone number ofthe recipient is not available, enter the SIPaddress or the phone number of the recipientincluding the country code, and select OK tosend the invitation.3. Sharing begins automatically when the recipientaccepts the invitation.4. To pause the sharing session, select Pause. Toresume sharing, select Continue. To fastforward or rewind the video clip, scroll up ordown. To play the clip again, press the end key.120Make calls
5. To end the sharing session, select Stop. To endthe voice call, press the end key. Video sharingalso ends if the active voice call ends.To save the live video you shared, select Save toaccept the Save shared video clip? query. Theshared video is saved in the Images & videos folderin Gallery.If you access other applications while you aresharing a video clip, the sharing is paused. To returnto the video sharing view and continue sharing, inthe active standby mode, select Options >Continue.Accept an invitationWhen someone sends you a video sharinginvitation, the invitation message displays thesender’s name or SIP address. If your device is notset to silent, it rings when you receive an invitation.If someone sends you a share invitation and you arenot within UMTS network coverage, you will notknow that you received an invitation.When you receive an invitation, select from thefollowing:●Accept — Activates the sharing session.●Reject — Declines the invitation. The senderreceives a message that you rejected theinvitation. You can also press the end key todecline the sharing session and disconnect thevoice call.When you receive a video clip, to mute the sound ofthe clip, select Mute.To end video sharing, select Stop. Video sharingalso ends if the active voice call ends.Internet callsWith the internet call service (network service), youcan make and receive calls over the internet.Internet calls can be established betweencomputers, between mobile phones, and betweena VoIP device and a traditional telephone. To makeor receive an internet call, your device must beconnected to an internet call service.To connect to an internet call service, your devicemust be in the coverage of a connection network,such as a WLAN access point.Your device supports voice calls over the internet(net calls). Your device attempts emergency callsprimarily over cellular networks. If an emergencycall using cellular networks is not successful, yourdevice attempts an emergency call through your netcall provider. Due to the established nature ofcellular telephony, you should use cellular networksfor emergency calls, if possible. If you have cellularnetwork coverage available, make sure that your121Make calls
cellular phone is switched on and ready to makecalls before you attempt an emergency call. Thecapability for an emergency call using internettelephony depends on the availability of a WLANnetwork and your net call provider'simplementation of emergency call capabilities.Contact your net call provider to check the internettelephony emergency call capability.Create an internet call profileBefore you can make internet calls, you must createan internet call profile.1. Press , select Tools > Settings >Connection > SIP settings > Options > NewSIP profile, and enter the required information.Ensure that Registration is set to Always on.Contact your internet call provider for the correctsettings.2. Select Proxy server > Transport type >Auto.3. Select Back until you return to the main view ofconnection settings.4. Select Internet tel. > Options > Newprofile. Enter a name for the profile, and selectthe SIP profile you just created.To use the created profile for connecting to theinternet call service automatically, press , andselect Tools > Connectivity > Internet tel. >Preferred profile.To log in to the internet call service manually, selectRegistration > When needed, and Transporttype > UDP or TCP in the SIP settings whencreating an internet call profile.Connect to the internet callserviceTo make or receive an internet call, your device mustbe connected to an internet call service. If you haveselected automatic login, your device automaticallyconnects to the internet call service. If you log in tothe service manually, select an available networkfrom the list and Select.When you are connected to an internet call service, is shown in the standby mode.The list of networks is refreshed automatically every15 seconds. To refresh the list manually, selectOptions > Refresh. Use this option if your WLANaccess point is not shown.To select an internet call service for outgoing callsif the device is connected to more than one service,select Options > Change service.To configure new services, select Options >Configure service. This option is shown only ifthere are services that have not been configured.122Make calls
To save the network to which you are currentlyconnected, select Options > Save network. Thesaved networks are marked with a star in the list ofnetworks.To connect to an internet call service using a hiddenWLAN, select Options > Use hidden network.To end the connection to an internet call service,select Options > Disconnect from serv..Make internet calls When you have activated the internet call feature,you can make an internet call from all applicationswhere you can make a regular voice call. Forexample, in Contacts, scroll to the desired contact,and select Call > Options > Internet call.To make an internet call in the standby mode, enterthe phone number or internet address, and pressthe call key.To make an internet call to an address that does notstart with a digit, press any number key when thedevice is in the standby mode, then press # for afew seconds to clear the display and to switch thedevice from the number mode to the letter mode.Enter the address, and press the call key.To make an internet call from Contacts, press ,select Contacts, scroll to the desired contact, andselect Options > Internet call.To make an internet call from the log, press ,select Tools > Log and the log type, scroll to thedesired contact, and select Options > Internetcall.Service settingsPress , select Tools > Connectivity > Internettel. > Options > Settings, and select the defaultsettings or service-specific settings.To set internet call as the preferred call type for alloutgoing calls, select Default call type > Internetcall. When your device is connected to an internetcall service, all calls are made as internet calls.To log in automatically to the internet call service,select Login type > Automatic. If you use theautomatic login type for WLANs, the deviceperiodically scans for WLANs, which increases thedemand on battery power and reduces the batterylife.To log in manually to the internet call service, selectLogin type > Manual.To view the networks you have saved for theinternet call service and the networks detected bythe internet call service, select Saved conn.networks.To define the service-specific settings, select Editservice settings. This option is only available if a123Make calls
service-specific software plug-in has been installedin the device.LogThe log stores information about thecommunication history of the device. The deviceregisters missed and received calls only if thenetwork supports these functions, the device isswitched on, and within the network service area.Recent callsPress , and select Tools > Log.To monitor the phone numbers of missed, received,and dialled voice calls, select Recent calls. Thedevice registers missed and received calls only if thenetwork supports these functions, the device isswitched on, and within the network service area.To clear all recent call lists, select Options > Clearrecent calls in the recent calls main view. To clearone of the call registers, open the register you wantto erase, and select Options > Clear list. To clearan individual event, open a register, scroll to theevent, and press C.Call durationPress , and select Tools > Log.To monitor the approximate duration of yourincoming and outgoing calls, select Call timers.Note: The actual time invoiced for calls byyour service provider may vary, depending onnetwork features, rounding off for billing, and soforth.To clear call duration timers, select Options >Clear timers. For this you need the lock code.Packet dataPress , and select Tools > Log.To check the amount of data sent and receivedduring packet data connections, select Packetdata. For example, you may be charged for yourpacket data connections by the amount of data sentand received.Monitor all communicationeventsPress , and select Tools > Log > Recent calls.Icons in the log are as follows: Incoming Outgoing Missed communication events124Make calls
To open the general log where you can monitor allvoice calls, text messages, or data and WLANconnections registered by the device, scroll right.Subevents, such as a text message sent in more thanone part and packet data connections, are loggedas one communication event. Connections to yourmailbox, multimedia messaging centre, or webpages are shown as packet data connections.To add an unknown phone number from the log toyour contacts, select Options > Save to Contacts.To filter the log, select Options > Filter and a filter.To erase the contents of the log, recent callsregister, and messaging delivery reportspermanently, select Options > Clear log. SelectYes to confirm. To remove a single event from oneof the recent calls logs, press C.To set the log duration, select Options >Settings > Log duration. If you select No log, allthe log contents, recent calls register, andmessaging delivery reports are permanentlydeleted.Tip: In the details view, you can copy a phonenumber to the clipboard, and paste it into atext message, for example. Select Options >Copy number.To view from the packet data counter how muchdata is transferred and how long a certain packetdata connection lasts, scroll to an incoming oroutgoing event indicated by Pack., and selectOptions > View details.125Make calls
Contacts (phonebook)In Contacts, you can save and update contactinformation, such as phone numbers, homeaddresses, or e-mail addresses of your contacts. Youcan add a personal ringing tone or a thumbnailimage to a contact card. You can also create contactgroups, which allow you to send text messages ore-mail to many recipients at the same time.Save and edit names andnumbers1. Press , and select Contacts > Options >New contact.2. Fill in the fields that you want, and select Done.To edit contact cards, scroll to the contact card youwant to edit, and select Options > Edit. You canalso search for the desired contact by entering thefirst letters of the name to the search field. A list ofthe contacts starting with the letters appear on thedisplay.Tip: To add and edit contact cards, you canalso use Nokia Contacts Editor available inNokia Nseries PC Suite.To attach a small thumbnail image to a contact card,open the contact card, and select Options > Edit >Options > Add thumbnail. The thumbnail imageis shown when the contact calls. Manage names and numbersTo add a contact to a group, select Options > Addto group (shown only if you have created a group).To check to which groups a contact belongs, selectthe contact and Options > Belongs to groups.To delete a contact card, select a card, and press C.To delete several contact cards at the same time,press and scroll down to mark the contacts, andpress C to delete. To send contact information, select the card youwant to send, Options > Send, and the desiredoption. To listen to the voice tag assigned to the contact,select a contact card and Options > Play voicetag. 126Contacts (phonebook)
Default numbers andaddressesPress , and select Contacts.You can assign default numbers or addresses to acontact card. In this way if a contact has severalnumbers or addresses, you can easily call or send amessage to the contact to a certain number oraddress. The default number is also used in voicedialling.1. In the contacts list, select a contact.2. Select Options > Defaults.3. Select a default to which you want to add anumber or an address, and select Assign.4. Select a number or an address you want to setas a default.The default number or address is underlined in thecontact card.Add ringing tones forcontactsPress , and select Contacts.To define a ringing tone for a contact or a contactgroup, do the following:1. Press the scroll key to open a contact card or goto the groups list, and select a contact group.2. Select Options > Ringing tone. A list of ringingtones opens.3. Select the ringing tone you want to use for theindividual contact or the members of theselected group.When a contact or group member calls you, thedevice plays the chosen ringing tone (if the caller’stelephone number is sent with the call and yourdevice recognises it).To remove the ringing tone, select Default tonefrom the list of ringing tones.Copy contactsTo copy names and numbers from a SIM card to yourdevice, press , and select Contacts > Options >SIM contacts > SIM directory, the names youwant to copy, and Options > Copy to Contacts.To copy contacts to your SIM card, in Contacts, selectthe names you want to copy and Options > Copyto SIM directory, or Options > Copy > To SIMdirectory. Only the contact card fields supported byyour SIM card are copied.127Contacts (phonebook)
SIM directory and other SIMservicesFor availability and information on using SIM cardservices, contact your SIM card vendor. This may bethe service provider or other vendor.To see the names and numbers stored on the SIMcard, select Options > SIM contacts > SIMdirectory. In the SIM directory you can add, edit, orcopy numbers to contacts, and you can make calls.To view the list of fixed dialling numbers, selectOptions > SIM contacts > Fixed dial contacts.This setting is only shown if supported by your SIMcard.To restrict calls from your device to selected phonenumbers, select Options > Activate fixeddialing. You need your PIN2 code to activate anddeactivate fixed dialling or edit your fixed diallingcontacts. Contact your service provider if you do nothave the code. To add new numbers to the fixeddialling list, select Options > New SIM contact.You need the PIN2 code for these functions.When you use fixed dialling, packet dataconnections are not possible, except when sendingtext messages over a packet data connection. In thiscase, the message centre number and therecipient’s phone number must be included on thefixed dialling list.When fixed dialling is activated, calls may bepossible to the official emergency numberprogrammed into your device.Manage contact groupsCreate contact groups1. In Contacts, scroll right to open the groups list.2. Select Options > New group.3. Write a name for the group or use the defaultname, and select OK.4. Select the group and Options > Addmembers.5. Scroll to a contact, and press the scroll key tomark it. To add multiple members at a time,repeat this action on all the contacts you wantto add.6. To add the contacts to the group, select OK.To rename a group, select Options > Rename,enter the new name, and select OK.Remove members from a group1. In the groups list, select the group you want tomodify.2. Scroll to the contact, and select Options >Remove from group.128Contacts (phonebook)
3. To remove the contact from the group, selectYes.129Contacts (phonebook)
Office folderQuickofficeWith Quickoffice, you can view .doc, .xls, .ppt,and .txt documents. All file formats or features arenot supported. Apple Macintosh is not supported.To use the Quickoffice applications, press , andselect Applications > Office > Quickoffice. A listof available files in the .doc, .xls, .ppt, and .txt fileformats opens.To open Quickword, Quicksheet, Quickpoint, orQuickmanager, use the scroll key to scroll to thetabs.If you experience problems with Quickword,Quicksheet, Quickpoint, or Quickmanager, visitwww.quickoffice.com for more information.Support is also available by sending an e-mail tosupportS60@quickoffice.com.QuickwordWith Quickword, you can view native MicrosoftWord documents with your device.Quickword supports the viewing of documentssaved in .doc and .txt formats created with MicrosoftWord 97, 2000, XP, and 2003. Not all variations orfeatures of the mentioned file formats aresupported.To upgrade to a version of Quickword that supportsediting, when you have a file open, selectOptions > Upgrade to edit. The upgrade ischargeable.QuicksheetWith Quicksheet, you can view native MicrosoftExcel files with your device.Quicksheet supports the viewing of spreadsheetfiles saved in .xls format created with MicrosoftExcel 97, 2000, XP, or 2003. Not all variations orfeatures of the mentioned file formats aresupported.To upgrade to a version of Quicksheet that supportsediting, when you have a file open, selectOptions > Upgrade to edit. The upgrade ischargeable.QuickpointWith Quickpoint, you can view native MicrosoftPowerPoint presentations with your device.130Office folder
Quickpoint supports the viewing of presentationssaved in .ppt format created with MicrosoftPowerPoint 2000, XP, and 2003. Not all variationsor features of the mentioned file formats aresupported.To upgrade to a version of Quickpoint that supportsediting, when you have a file open, selectOptions > Upgrade to edit. The upgrade ischargeable.QuickmanagerWith Quickmanager, you can download software,including updates, upgrades, and other usefulapplications. You can pay for the downloads byphone bill or credit card.NotesPress , and select Applications > Office >Notes.To write a note, start entering the text. The noteeditor opens automatically.To open a note, scroll to it, and press the scroll key.To send a note to other compatible devices, selectOptions > Send.To delete a note, press C.Tip: To delete several notes, select Options >Mark/Unmark and the notes, and press C.To synchronise or to define synchronisationsettings for a note, select Options >Synchronization. Select Start to startsynchronisation or Settings to define thesynchronisation settings for the note.Adobe PDF readerPress , and select Applications > Office >Adobe PDF.With the PDF reader you can read PDF documentson the display of your device; search for text in thedocuments; modify settings, such as zoom level andpage views; and send PDF files using e-mail.ConverterPress , and select Applications > Office >Converter.With Converter, you can convert measures from oneunit to another.The converter has limited accuracy, and roundingerrors may occur.1. In the Type field, select the measure you want touse.131Office folder
2. In first Unit field, select the unit from which youwant to convert.3. In the next Unit field, select the unit to which youwant to convert.4. In the first Amount field, enter the value youwant to convert. The other Amount field changesautomatically to show the converted value.Set base currency and exchange ratesSelect Type > Currency > Options > Currencyrates. Before you can make currency conversions,you must select a base currency and add exchangerates. The rate of the base currency is always 1.Note: When you change base currency, youmust enter new exchange rates because allpreviously set exchange rates are cleared.Zip managerPress , and select Applications > Office > Zip.With Zip manager, you can create new archive filesto store compressed .zip files; add single or multiplecompressed files or directories to an archive; set,clear, or change the archive password for protectedarchives; and change settings, such as compressionlevel and file name encoding.Barcode readerPress , and select Applications > Office >Barcode.Use the Barcode reader application to decodedifferent types of codes (such as codes inmagazines). The codes may contain informationsuch as URL links, e-mail addresses, and phonenumbers.1. To scan a code, select Scan code.2. Set the code to fit the display.The application attempts to scan and decode thecode, and the decoded information appears onthe display.When viewing the decoded information, thedifferent links, URL links, phone numbers, and e-mail addresses are indicated by icons on the topof the display in the direction they appear in thedecoded information.3. To save the scanned data, select Options >Save.The data is saved in .bcr format in the Saveddata folder.To select the memory where the information issaved, select Options > Settings > Memoryin use.132Office folder
4. To use the decoded information, selectOptions and the desired action.The device reverts to the standby mode to savebattery power if the barcode reader cannot beactivated or if no keys are pressed for 1 minute.133Office folder
Applications folderCalculatorPress , and select Applications > Calculator.Note: This calculator has limited accuracyand is designed for simple calculations.To make a calculation, enter the first number of thecalculation. Select a function such as add or subtractfrom the function map. Enter the second number ofthe calculation, and select =.The calculator performs operations in the orderthey are entered. The result of the calculationremains in the editor field and can be used as thefirst number of a new calculation.To save the results of a calculation, select Options >Memory > Save. The saved result replaces thepreviously stored result in the memory.To retrieve the results of a calculation from thememory and use them in a calculation, selectOptions > Memory > Recall.To view the last saved result, select Options > Lastresult. Exiting the Calculator application orswitching off the device does not clear the memory.You can recall the last saved result the next time youopen the Calculator application.Application managerWith Application manager, you can see the softwarepackages installed in your device. You can viewdetails of installed applications, removeapplications, and define installation settings.Press , and select Applications > App. mgr..You can install two types of applications andsoftware to your device:●J2ME applications based on Java technology withthe extension .jad or .jar●Other applications and software suitable for theSymbian operating system with theextension .sis or .sisxOnly install software specifically designed for yourdevice: Nokia N95 8GB. Software providers willoften refer to the official model number of thisproduct: N95-4.134Applications folder
Install applications and software Installation files may be transferred to your devicefrom a compatible computer, downloaded duringbrowsing, or sent to you in a multimedia messageas an e-mail attachment or using other connectivitymethods, such as Bluetooth connectivity. You canuse Nokia Application Installer in Nokia Nseries PCSuite to install an application to your device. indicates a .sis or .sisx application, a Javaapplication, that the application is not fullyinstalled, and that the application is installed inthe mass memory.Important: Only install and use applicationsand other software from trusted sources, such asapplications that are Symbian Signed or havepassed the Java VerifiedTM testing.Before installation, note the following:●To view the application type, version number,and the supplier or manufacturer of theapplication, select Options > View details.To display the security certificate details of theapplication, in Details:, scroll to Certificates,and select View details. See "Certificatemanagement", p. 144.●If you install a file that contains an update orrepair to an existing application, you can onlyrestore the original application if you have theoriginal installation file or a full backup copy ofthe removed software package. To restore theoriginal application, remove the application, andinstall the application again from the originalinstallation file or the backup copy.The .jar file is required for installing Javaapplications. If it is missing, the device may askyou to download it. If there is no access pointdefined for the application, you are asked toselect one. When you are downloading the .jarfile, you may need to enter a user name andpassword to access the server. You obtain thesefrom the supplier or manufacturer of theapplication.To install an application or software, do thefollowing:1. To locate an installation file, press , and selectApplications > App. mgr.. Alternatively,search the memory in File manager, or open amessage in Messaging > Inbox that containsan installation file.2. In Application manager, select Options >Install. In other applications, scroll to theinstallation file, and select it to start theinstallation.During installation, the device showsinformation about the progress of theinstallation. If you install an application without135Applications folder
a digital signature or certification, the devicedisplays a warning. Continue installation only ifyou are sure of the origin and contents of theapplication.To start an installed application, locate it in themenu, and select it. If the application does not havea default folder defined, it is installed in theApplications folder in the main menu.To see which software packages are installed orremoved and when, select Options > View log.Important: Your device can only support oneantivirus application. Having more than oneapplication with antivirus functionality could affectperformance and operation or cause the device tostop functioning.After you install applications to mass memory,installation files (.sis or .sisx) remain in the devicememory. The files may use large amounts ofmemory and prevent you from storing other files.To maintain sufficient memory, use Nokia NseriesPC Suite to back up installation files to a compatiblePC, then use the file manager to remove theinstallation files from the device memory. If the .sisfile is a message attachment, delete the messagefrom the Messaging inbox.See "File manager", p. 138.Remove applications andsoftwarePress , and select Applications > App. mgr..Scroll to a software package, and select Options >Remove. Select Yes to confirm.If you remove software, you can only reinstall it ifyou have the original software package or a fullbackup of the removed software package. If youremove a software package, you may no longer beable to open documents created with that software.If another software package depends on thesoftware package that you removed, the othersoftware package may stop working. Refer to thedocumentation of the installed software packagefor details.SettingsPress , and select Applications > App. mgr..Select Options > Settings and from the following:●Software installation — Select whetherSymbian software that has no verified digitalsignature can be installed.●Online certificate check — Select to check theonline certificates before installing anapplication.●Default web address — Set the default addressused when checking online certificates.136Applications folder
Some Java applications may require that a messagebe sent or a network connection be made to aspecific access point to download extra data orcomponents. In the Application manager mainview, scroll to an application, and select Options >Open to change settings related to that specificapplication.137Applications folder
Tools folderFile managerPress , and select Tools > File mgr..With File manager, you can browse files and foldersin the device memory or mass memory. When youopen File manager, the device memory view ( )opens. Scroll right to open the mass memory view().To view what types of data you have in the deviceand how much memory the different data typesconsume, select Options > Memory details. Theamount of available memory is shown in Freememory.To find a file, select Options > Find and thememory from which to search. Enter a search textthat matches the file name.To mark several files, press and hold while youpress the scroll key, or scroll up or down. To moveor copy the files to a folder, select Options > Moveto folder or Copy to folder.Mass memory toolYour device has an 8 GB internal memory providinghigh-capacity storage for different kind of files.To monitor the amount of used and free space inthe device mass memory, press , and selectTools > Utilities > Memory. To see how muchmemory the different applications and data typesuse, select Options > Memory details.To change the name of the mass memory, selectOptions > Mass memory name.To back up information from the device memory tothe mass memory, select Options > Back upphone memory.To restore information from the mass memory tothe device memory, select Options > Rest. frommass mem..Format mass memoryWhen mass memory is reformatted, all data in thememory is permanently lost. Back up data you wantto keep before formatting the mass memory. Youcan use Nokia Nseries PC Suite to back up data to acompatible PC. Digital Rights Management (DRM)138Tools folder
technologies may prevent some back-up data frombeing restored. Contact your service provider formore information about DRM used for your content.See "Activation keys", p. 60.To format mass memory, select Options > Formatmass memory. Select Yes to confirm.Formatting does not guarantee that all confidentialdata stored in the device mass memory ispermanently destroyed. Standard formatting onlymarks the formatted area as available space anddeletes the address to find the files again. Therecovery of formatted or even overwritten data maystill be possible with special recovery tools andsoftware.Voice commandsPress , and select Tools > Utilities > Voicecomm..You can use enhanced voice commands to controlyour device. See "Voice dialling", p. 116.To activate enhanced voice commands to startapplications and profiles, you must open the Voicecommands application and its Profiles folder; thedevice creates voice tags for the applications andprofiles. To use enhanced voice commands, pressand hold the right selection key in the standbymode, and speak a voice command. The voicecommand is the name of the application or profiledisplayed in the list.To add more applications to the list, in the Voicecommands main view, select Options > Newapplication. To add a second voice command thatcan be used to start the application, selectOptions > Change command, and enter the newvoice command as text. Avoid very short names,abbreviations, and acronyms.To listen to the synthesised voice tag, selectOptions > Playback.To change voice command settings, selectOptions > Settings. To switch off the synthesiserthat plays recognised voice tags and commands inthe selected device language, select Synthesizer >Off. To reset voice recognition learning, forexample, when the main user of the device haschanged, select Remove voice adapts..SyncPress , and select Tools > Sync.Sync enables you to synchronise your notes,calendar entries, text messages, or contacts withvarious compatible applications on a compatiblecomputer or on the internet.You may receive synchronisation settings in aspecial message.139Tools folder
In the Sync main view, you can see the differentsynchronisation profiles. A synchronisation profilecontains the necessary settings to synchronise datain your device with a remote database on a serveror compatible device.To synchronise data, select Options >Synchronize. To cancel synchronisation before itfinishes, select Cancel.Device managerPress , and select Tools > Utilities > Devicemgr..Use Device manager to connect to a server andreceive configuration settings for your device, tocreate new server profiles, or to view and manageexisting server profiles.You may receive server profiles and differentconfiguration settings from your service providersand company information managementdepartment. These configuration settings mayinclude connection and other settings used bydifferent applications in your device.Scroll to a server profile, and select Options andfrom the following:●Start configuration — Connect to the serverand receive configuration settings for yourdevice.●New server profile — Create a server profile.To delete a server profile, scroll to it, and press C.140Tools folder
SettingsSome settings may be preset for the device by yourservice provider, and you may not be able to changethem.General settingsIn general settings, you can edit the generalsettings of your device or restore the device tooriginal default settings.You can adjust time and date settings also in theclock. See "Clock ", p. 98.Personalisation settingsPress , and select Tools > Settings >General > Personalization.You can edit settings related to the display, standbymode, and general functions of your device.Themes allows you to change the look of thedisplay. See "Themes", p. 95.Voice comms. opens the settings for the Voicecommands application. See "Voicecommands", p. 139.Tones allows you to change the tones of thecalendar, clock, and currently active profile.Display●Light sensor — Scroll left or right to adjust thelight sensor that observes the lighting conditionsand adjusts the brightness of the display. Thelight sensor may cause the display to flicker inlow light. ●Font size — Adjust the size of the text and iconson the display. ●Power saver time-out — Select the time-outperiod after which the power saver is activated. ●Welcome note / logo — The welcome note orlogo is displayed briefly each time you switch onthe device. Select Default to use the defaultimage, Text to write a welcome note, or Imageto select an image from Gallery. ●Light time-out — Select a time-out after whichthe backlight of the display is switched off. Standby mode●Active standby — Activate shortcuts toapplications in the standby mode. ●Shortcuts — Assign a shortcut to the selectionkeys in the standby mode.141Settings
If the active standby is set off, you can also assignkeypad shortcuts for the different presses of thescroll key.●Active standby apps. — If the active standby isset on, select the application shortcuts you wantto appear in the active standby. ●Operator logo — This setting is only availableif you have received and saved an operator logo.Select Off if you do not want the logo to beshown. LanguageChanging the settings for the phone language orwriting language affects every application in yourdevice, and the change remains effective until youchange these settings again.●Phone language — Change the language of thedisplay text in your device. This also affects theformat used for date and time and the separatorsused, for example, in calculations. Automaticselects the language according to theinformation on your SIM card. After you changethe display text language, the device restarts.●Writing language — Change the writinglanguage. This affects the characters availablewhen writing text and the predictive textdictionary used.●Predictive text — Set predictive text input onor off for all editors in the device. The predictivetext dictionary is not available for all languages.Enhancement settingsPress , and select Tools > Settings >General > Enhancement.Some enhancement connectors indicate which typeof enhancement is connected to the device. See"Display indicators", p. 21.The available settings depend on the type ofenhancement. Select an enhancement and from thefollowing:●Default profile — Set the profile that you wantactivated each time you connect a certaincompatible enhancement to your device.●Automatic answer — Select whether you wantthe device to answer an incoming callautomatically after 5 seconds. If the ringing typeis set to Beep once or Silent, automatic answeris disabled.●Lights — Set whether lights remain on or areswitched off after the time-out. This setting is notavailable for all enhancements.TV-out settingsTo change the settings for a TV-out connection,select TV-Out and from the following:●Default profile — Set the profile that you wantactivated each time you connect a Nokia VideoConnectivity Cable to your device.142Settings
●TV screen size — Select the aspect ratio of theTV: Normal or Widescreen for widescreen TVs.●TV system — Select the analogue video signalsystem that is compatible with your TV.●Flicker filter — To improve image quality on thescreen of your TV, select On. The flicker filter maynot diminish image flicker on all TV screens.Security settingsPhone and SIMPress , and select Tools > Settings >General > Security > Phone and SIM card.●PIN code request — When active, the code isrequested each time the device is switched on.Deactivating the PIN code request may not beallowed by some SIM cards.●PIN code, PIN2 code, and Lock code — You canchange the lock code, PIN code, and PIN2 code.These codes can only include the numbers from0 to 9.If you forget the PIN or the PIN2 code, contactyour service provider. If you forget the lock code,contact a Nokia Care point or your serviceprovider.See "Access codes", p. 16.Avoid using access codes similar to theemergency numbers to prevent accidentaldialling of the emergency number.●Keypad autolock period — Select whether thekeypad is locked when your device has been idlefor a certain period of time.●Phone autolock period — To avoidunauthorised use, you can set a time-out afterwhich the device automatically locks. A lockeddevice cannot be used until the correct lock codeis entered. To turn off the autolock period, selectNone.Tip: To lock the device manually, press thepower key. A list of commands opens.Select Lock phone.●Lock keys if slide closed — Select whether thekeypad is locked when you close the 2-way slide.Tip: To lock or unlock the keypad manuallywhen the slide is closed, press the leftselection key, then the right selection key.●Lock if SIM card changed — You can set thedevice to ask for the lock code when an unknownSIM card is inserted into your device. The devicemaintains a list of SIM cards that are recognisedas the owner’s cards.●Closed user group — You can specify a group ofpeople to whom you can call and who can callyou (network service).●Confirm SIM services — You can set the deviceto display confirmation messages when you areusing a SIM card service (network service).143Settings
Certificate managementPress , and select Tools > Settings >General > Security > Certificate management.Digital certificates do not guarantee safety; they areused to verify the origin of software.In the certificate management main view, you cansee a list of authority certificates that are stored inyour device. Scroll right to see a list of personalcertificates, if available.Digital certificates should be used if you want toconnect to an online bank or another site or remoteserver for actions that involve transferringconfidential information. They should also be usedif you want to reduce the risk of viruses or othermalicious software and be sure of the authenticityof software when downloading and installingsoftware.Important: Even if the use of certificatesmakes the risks involved in remote connections andsoftware installation considerably smaller, theymust be used correctly in order to benefit fromincreased security. The existence of a certificatedoes not offer any protection by itself; thecertificate manager must contain correct,authentic, or trusted certificates for increasedsecurity to be available. Certificates have arestricted lifetime. If "Expired certificate" or"Certificate not valid yet" is shown even if thecertificate should be valid, check that the currentdate and time in your device are correct.Before changing any certificate settings, you mustmake sure that you really trust the owner of thecertificate and that the certificate really belongs tothe listed owner.View certificate details—check authenticityYou can only be sure of the correct identity of aserver when the signature and the period of validityof a server certificate have been checked.You are notified if the identity of the server is notauthentic or if you do not have the correct securitycertificate in your device.To check certificate details, scroll to a certificate,and select Options > Certificate details. Whenyou open certificate details, the validity of thecertificate is checked, and one of the followingnotes may be displayed:●Certificate not trusted — You have not set anyapplication to use the certificate.●Expired certificate — The period of validity hasended for the selected certificate.●Certificate not valid yet — The period of validityhas not yet begun for the selected certificate.●Certificate corrupted — The certificate cannotbe used. Contact the certificate issuer.Change the trust settings144Settings
Before changing any certificate settings, you mustmake sure that you really trust the owner of thecertificate and that the certificate really belongs tothe listed owner.Scroll to an authority certificate, and selectOptions > Trust settings. Depending on thecertificate, a list of the applications that can use theselected certificate is shown. For example:●Symbian installation: Yes — The certificate isable to certify the origin of a new Symbianoperating system application.●Internet: Yes — The certificate is able to certifyservers.●App. installation: Yes — The certificate is ableto certify the origin of a new Java™ application.Select Options > Edit trust setting to change thevalue.Security modulePress , and select Tools > Settings >General > Security > Security module.To vie w or ed it a sec uri ty modu le ( if ava ilab le), scrol lto it, and press the scroll key.To view detailed information about a securitymodule, scroll to it, and select Options > Securitydetails.Restore original settingsPress , and select Tools > Settings >General > Factory settings.You can reset some of the settings to their originalvalues. To do this, you need the lock code.After resetting, the device may take a longer timeto power on. Documents and files are unaffected.Positioning settingsPress , and select Tools > Settings >General > Positioning.Positioning methods●Integrated GPS — Use the integrated GPSreceiver of your device.●Assisted GPS — Use Assisted GPS (A-GPS).●Bluetooth GPS — Use a compatible external GPSreceiver with Bluetooth connectivity.●Network based — Use information from thecellular network (network service).Positioning serverTo define an access point, and positioning server forA-GPS, select Positioning server. The positioningserver may be preset by your service provider, andyou may not be able to edit the settings.145Settings
Phone settingsIn phone settings, you can edit settings related tophone calls and network.Call settingsPress , and select Tools > Settings > Phone >Call.●Send my caller ID — You can set your phonenumber to be displayed to (Yes) or hidden from(No) the person to whom you are calling, or thevalue may be set by your service provider whenyou make a subscription (Set by network)(network service).●Call waiting — If you have activated call waiting(network service), the network notifies you of anew incoming call while you have a call inprogress. Set the function on (Activate) or off(Cancel), or check whether the function isactivated (Check status).●Internet call waiting — Select Activated to benotified of a new incoming internet call whileyou have a call in progress.●Internet call alert — Select On to be alerted forincoming internet calls. If you select Off, you arenot alerted, but a notification about missed callsappears.●Default call type — To set internet calls as thedefault call type when making calls, selectInternet call. If an internet call service is notavailable, a regular voice call is started instead.●Reject call with SMS — To send a text messageto a caller informing why you could not answerthe call, select Yes.●Message text — Write a text to be sent in a textmessage when you reject a call.●Image in video call — If video is not sent duringa video call, you can select a still image to bedisplayed instead.●Automatic redial — Select On, and your devicemakes a maximum of 10 attempts to connect thecall after an unsuccessful call attempt. To stopautomatic redialling, press the end key. ●Show call duration — Activate this setting ifyou want the length of a call to be displayedduring the call.●1-touch — Select On, and the numbers assignedto the number keys (2 to 9) can be dialled bypressing and holding the key. See "1-touch dial aphone number", p. 116.●Anykey answer — Select On, and you cananswer an incoming call by briefly pressing anykeypad key, except the left and right selectionkeys, the power key, and the end key.●Line in use — This setting (network service) isshown only if the SIM card supports twosubscriber numbers, that is, two phone lines.Select which phone line you want to use formaking calls and sending text messages. Calls on146Settings
both lines can be answered irrespective of theselected line. If you select Line 2 and have notsubscribed to this network service, you are notable to make calls. When line 2 is selected, isshown in the standby mode.Tip: To switch between the phone lines,press and hold # in the standby mode.●Line change — To prevent line selection(network service), select Disable if supported byyour SIM card. To change this setting, you needthe PIN2 code.Call divertPress , and select Tools > Settings > Phone >Call forwarding.Call divert allows you to divert your incoming callsto your voice mailbox or another phone number. Fordetails, contact your service provider.Select which calls you want to divert and the desireddiverting option. Set the option on (Activate) or off(Cancel), or check whether the option is activated(Check status).Several diverting options can be active at the sametime. When all calls are diverted, is shown inthe standby mode.Call barring and call diverting cannot be active atthe same time.Call barringPress , and select Tools > Settings > Phone >Call restriction.Call barring (network service) allows you to restrictthe calls that you make or receive with the device.To change the settings, you need the barringpassword from your service provider.Call barring and call diverting cannot be active atthe same time.When calls are barred, calls may be possible tocertain official emergency numbers.Voice call barringSelect the desired barring option, and set it on(Activate) or off (Cancel), or check whether theoption is active (Check status). Call barring affectsall calls, including data calls.Internet call barringTo select whether anonymous calls are allowedfrom the internet, set Anonymous callrestriction on or off.Network settingsPress , and select Tools > Settings > Phone >Network.Your device can automatically switch between theGSM and UMTS networks. The GSM network is147Settings
indicated with in the standby mode. The UMTSnetwork is indicated with .●Network mode — Select which network to use.If you select Dual mode, the device uses the GSMor UMTS network automatically, according to thenetwork parameters and the roamingagreements between the wireless serviceproviders. Contact your network service providerfor details and roaming costs. This option isshown only if supported by the wireless serviceprovider.●Operator selection — Select Automatic to setthe device to search for and select one of theavailable networks, or Manual to manuallyselect the network from a list. If the connectionto the manually selected network is lost, thedevice sounds an error tone and asks you toreselect a network. The selected network musthave a roaming agreement with your homecellular network.A roaming agreement is an agreement betweentwo or more service providers to enable the usersof one service provider to use the services ofother service providers.●Cell info display — Select On to set the deviceto indicate when it is used in a cellular networkbased on microcellular network (MCN)technology and to activate cell info reception.Connection settingsIn connection settings, you can edit access pointsand other connectivity settings.You can also edit settings for Bluetooth connectivityin the Bluetooth connectivity application. See"Settings", p. 36.You can also edit settings for data cable connectionsin the USB application. See "USB", p. 40.Data connections and accesspointsYour device supports packet data connections(network service), such as GPRS in the GSM network.When you use your device in GSM and UMTSnetworks, multiple data connections can be activeat the same time, and access points can share a dataconnection. In the UMTS network, data connectionsremain active during voice calls.You can also use a WLAN data connection. Only oneconnection in one wireless LAN can be active at atime, but several applications can use the sameinternet access point.To establish a data connection, an access point isrequired. You can define different kinds of accesspoints, such as the following:●MMS access point to send and receive multimediamessages148Settings
●Internet access point (IAP) to send and receive e-mail and connect to the internetCheck the type of access point you need with yourservice provider for the service you want to access.For availability and subscription to packet dataconnection services, contact your service provider.Access pointsCreate a new access pointPress , and select Tools > Settings >Connection > Access points.You may receive access point settings in a messagefrom a service provider. Some or all access pointsmay be preset for your device by your serviceprovider, and you may not be able to change, create,edit, or remove them. indicates a protected access point. indicates a packet data access point. indicates a WLAN access point.Tip: You can create internet access points ina wireless LAN with the WLAN wizard.To create a new access point, select Options >New access point.To edit the settings of an access point, selectOptions > Edit. Follow the instructions from yourservice provider.●Connection name — Enter a descriptive namefor the connection.●Data bearer — Select the data connection type.Depending on the data connection you select, onlycertain setting fields are available. Fill in all fieldsmarked with Must be defined or with a redasterisk. Other fields can be left empty, unless youhave been instructed otherwise by your serviceprovider.To be able to use a data connection, your serviceprovider must support this feature, and if necessary,activate it for your SIM card.Packet data access pointsPress , and select Tools > Settings >Connection > Access points > Options > Editor New access point.Follow the instructions from your service provider.●Access point name — You obtain the accesspoint name from your service provider.●User name — The user name may be needed tomake a data connection, and is usually providedby the service provider.●Prompt password — If you must enter thepassword every time you log in to a server, or ifyou do not want to save your password in thedevice, select Yes.149Settings
●Password — A password may be needed tomake a data connection and is usually providedby the service provider.●Authentication — Select Secure to always sendyour password encrypted or Normal to sendyour password encrypted when possible.●Homepage — Depending on the access pointyou are setting up, enter the web address or theaddress of the multimedia messaging centre.Select Options > Advanced settings to changethe following settings:●Network type — Select the internet protocoltype to transfer data to and from your device. Theother settings depend on the selected networktype.●Phone IP address (for IPV4 only) — Enter the IPaddress of your device.●DNS address — Enter the IP addresses of theprimary and secondary DNS servers, if requiredby your service provider. Contact your internetservice provider to obtain these addresses.●Proxy server address — Enter the address ofthe proxy server. ●Proxy port number — Enter the port numberof the proxy server.WLAN internet access pointsPress , and select Tools > Settings >Connection > Access points > Options > Editor New access point.Follow the instructions from the WLAN serviceprovider.●WLAN network name — Select Entermanually or Search for networks. If you selectan existing network, WLAN network mode andWLAN security mode are determined by thesettings of its access point device.●Network status — Define whether the networkname is displayed.●WLAN network mode — Select Ad-hoc tocreate an ad hoc network and to allow devices tosend and receive data directly; a WLAN accesspoint device is not needed. In an ad hoc network,all devices must use the same WLAN networkname.●WLAN security mode — Select the encryptionused: WEP, 802.1x (not for ad hoc networks), orWPA/WPA2. If you select Open network, noencryption is used. The WEP, 802.1x, and WPAfunctions can be used only if the networksupports them.To enter the settings for the selected security mode,select WLAN security settings.Security settings for WEP150Settings
●WEP key in use — Select the wired equivalentprivacy (WEP) key number. You can create up tofour WEP keys. The same settings must beentered on the WLAN access point device.●Authentication type — Select Open orShared for the authentication type betweenyour device and the WLAN access point device.●WEP key settings — Enter WEP encryption(length of the key), WEP key format (ASCII orHexadecimal), and WEP key (the WEP key datain the selected format).Security settings for 802.1x and WPA/WPA2●WPA/WPA2 — Select the means ofauthentication: EAP to use an extensibleauthentication protocol (EAP) plug-in, or Pre-shared key to use a password. Complete theappropriate settings:●EAP plug-in settings — Enter the settings asyour service provider instructs.●Pre-shared key — Enter a password. Thesame password must be entered on the WLANaccess point device.●WPA2 only mode — Only WPA2 enabled devicesare allowed to establish a connection in thismode.Advanced WLAN settingsSelect Options > Advanced settings and from thefollowing:●IPv4 settings — Enter the IP address of yourdevice, the subnet IP address, the defaultgateway, and the IP addresses of the primary andsecondary DNS servers. Contact your internetservice provider for these addresses.●IPv6 settings — Define the type of DNS address.●Ad-hoc channel (only for Ad-hoc) — To enter achannel number (1-11) manually, select Userdefined.●Proxy server address — Enter the address forthe proxy server.●Proxy port number — Enter the proxy portnumber.Packet data settingsPress , and select Tools > Settings >Connection > Packet data.The packet data settings affect all access pointsusing a packet data connection.●Packet data connection — If you select Whenavailable and you are in a network that supportspacket data, the device registers to the packetdata network. Starting an active packet dataconnection (for example, to send and receive e-mail) is quicker. If there is no packet datacoverage, the device periodically tries toestablish a packet data connection. If you selectWhen needed, the device uses a packet data151Settings
connection only if you start an application oraction that needs it.●Access point — The access point name is neededto use your device as a packet data modem to acompatible computer.●High speed packet access — Enable or disablethe use of HSDPA (network service) in UMTSnetworks.Wireless LAN settingsPress , and select Tools > Settings >Connection > Wireless LAN.●Show WLAN availability — Select whether is displayed in the standby mode when a wirelessLAN is available.●Scan for networks — If you set Show WLANavailability to Yes, select how often the devicesearches for available wireless LANs and updatesthe indicator.To view advanced settings, select Options >Advanced settings. Changing wireless LANadvanced settings is not recommended.SIP settingsPress , and select Tools > Settings >Connection > SIP settings.Session Initiation Protocol (SIP) settings are neededfor certain network services using SIP. You mayreceive the settings in a special text message fromyour service provider. You can view, delete, orcreate these setting profiles in SIP settings.Internet call settingsPress , and select Tools > Settings >Connection > Internet tel..To create a new internet call profile, selectOptions > New profile.To edit an existing profile, select Options > Edit.ConfigurationsPress , and select Tools > Settings >Connection > Configurations.You may receive trusted server settings from yourservice provider in a configuration message. Youcan save view or delete these settings inconfigurations.Access point name controlPress , and select Tools > Settings >Connection > APN control.With the access point name control service, you canrestrict packet data connections and allow yourdevice to use only certain packet data access points.This setting is only available if your SIM cardsupports the access point control service.152Settings
To set the control service on or off or to change theallowed access points, select Options and thecorresponding option. To change the options, youneed your PIN2 code. Contact your service providerfor the code.Application settingsTo edit the settings of some of the applications inyour device, press , and select Tools >Settings > Applications.To edit the settings, you can also select Options >Settings in each application.153Settings
TroubleshootingQ: What is my password for the lock, PIN, orPUK codes?A: The default lock code is 12345. If you forget orlose the lock code, contact a Nokia Care point or yourservice provider. If you forget or lose a PIN or PUKcode, or if you have not received such a code,contact your network service provider. Forinformation about passwords, contact your accesspoint provider, for example, a commercial internetservice provider (ISP) or network service provider.Q: How do I close an application that is notresponding?A: Press and hold . To close an application, scrollto it, and press C . Pressing C does not close Musicplayer. To close Music player, select it from the list,and Options > Exit.Q: Why do images look smudgy?A: Ensure that the camera lens protection windowsare clean.Q: Why do missing, discoloured, or brightdots appear on the screen every time I turnon my device?A: This is a characteristic of this type of display.Some displays may contain pixels or dots thatremain on or off. This is normal, not a fault.Q: Why can't my device establish a GPSconnection?A: Find more information about GPS, GPS receiver,satellite signals, and location information in thisuser guide. See "Positioning (GPS)", p. 85.Q: Why can’t I find my friend’s device whileusing Bluetooth connectivity?A: Check that both devices are compatible, haveactivated Bluetooth connectivity, and are not inhidden mode. Check also that the distance betweenthe two devices is not over 10 metres (33 feet) andthat there are no walls or other obstructionsbetween the devices.Q: Why can’t I end a Bluetooth connection?A: If another device is connected to your device, youcan either end the connection using the otherdevice or by deactivating Bluetooth connectivity.154Troubleshooting
Press , and select Tools > Bluetooth >Bluetooth > Off.Q: Why can’t the other device see the filesstored on my device in the home network?A: Make sure that you have configured the homenetwork settings, content sharing is turned on inyour device, and the other device is UPnPcompatible.Q: What can I do if my home networkconnection stops working?A: Switch off the wireless LAN (WLAN) connectionfrom your compatible PC and your device, andswitch it on again. If this does not help, restart yourcompatible PC and your device. If the connectionstill does not work, reconfigure the WLAN settingsin both your compatible PC and device. See"Wireless LAN", p. 33. See "Connectionsettings", p. 148.Q: Why can't I see my compatible PC in mydevice in the home network?A: If you are using a firewall application in yourcompatible PC, check that it allows home mediaserver to use the external connection (you can addHome media server to the firewall application'sexceptions list). Check from the firewall settingsthat the firewall application allows traffic to thefollowing ports: 1900, 49152, 49153, and 49154.Some WLAN access point devices have a built-infirewall. In such cases, check that the firewall in theaccess point device does not block traffic to thefollowing ports: 1900, 49152, 49153, and 49154.Check that the WLAN settings are the same in yourdevice and compatible PC.Q: Why can't I see a wireless LAN (WLAN)access point even though I know I'm withinits range?A: The WLAN access point may use a hidden serviceset identifier (SSID). You can only access networksthat use a hidden SSID if you know the correct SSID,and have created a WLAN Internet access point forthe network on your Nokia device.Q: How do I switch wireless LAN (WLAN) offon my Nokia device?A: The WLAN on your Nokia device switches offwhen you are not trying to connect, not connectedto another access point, or not scanning foravailable networks. To further reduce batteryconsumption, you can specify that your Nokiadevice does not scan, or scans less often, foravailable networks in the background. WLANswitches off in between background scans.To change the background scan settings:1. Press , and select Tools > Settings >Connection > Wireless LAN.155Troubleshooting
2. To increase the background scan time interval,adjust the time in Scan for networks. To stopbackground scans, select Show WLANavailability > Never.3. To save your changes, press Back.When Scan for networks is set to Never, theWLAN availability icon is not shown in thestandby mode. However, you can still manuallyscan for available WLAN networks, and connectto WLAN networks as usual.Q: How can I save my data before deleting it?A: To save data, use Nokia Nseries PC Suite to makea back-up copy of all data to a compatible computer;send images to your e-mail address, then save theimages to your computer; or send data usingBluetooth connectivity to a compatible device.Q: Why can’t I select a contact for mymessage?A: The contact card does not have a phone number,an address, or an e-mail address. Press , selectContacts, and edit the contact card.Q: How can I end the data connection whenthe device starts a data connection again andagain?A: The device may be trying to retrieve a multimediamessage from the multimedia message centre. Tostop the device from making a data connection,press , and select Messaging > Options >Settings > Multimedia message > Multimediaretrieval and Manual to have the multimediamessaging centre save messages to be retrievedlater, or Off to ignore all incoming multimediamessages. If you select Manual, you receive anotification when there is a new multimediamessage that you can retrieve in the multimediamessage centre. If you select Off, the device doesnot make any network connections related tomultimedia messaging. To set the device to use apacket data connection only if you start anapplication or action that needs it, press , andselect Tools > Settings > Connection > Packetdata > Packet data connection > Whenneeded. If this does not help, switch the device off,and switch it on again.Q: Why do I have problems connecting thedevice to my PC?A: Ensure that you have the latest version of NokiaNseries PC Suite and that it is installed and runningon your compatible PC. For further information onhow to use Nokia Nseries PC Suite, see the helpfunction on Nokia Nseries PC Suite or visit the Nokiasupport pages.156Troubleshooting
Q: Can I use my device as a fax modem witha compatible PC?A: You cannot use your device as a fax modem.However, with call diverting (network service), youcan divert incoming fax calls to another phonenumber.157Troubleshooting
Battery informationCharging and dischargingYour device is powered by a rechargeable battery.The battery can be charged and dischargedhundreds of times, but it will eventually wear out.When the talk and standby times are noticeablyshorter than normal, replace the battery. Use onlyNokia approved batteries, and recharge yourbattery only with Nokia approved chargersdesignated for this device.If a replacement battery is being used for the firsttime or if the battery has not been used for aprolonged period, it may be necessary to connectthe charger, then disconnect and reconnect it tobegin charging the battery.Unplug the charger from the electrical plug and thedevice when not in use. Do not leave a fully chargedbattery connected to a charger, since overchargingmay shorten its lifetime. If left unused, a fullycharged battery will lose its charge over time.If the battery is completely discharged, it may takeseveral minutes before the charging indicatorappears on the display or before any calls can bemade.Use the battery only for its intended purpose. Neveruse any charger or battery that is damaged.Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such asa coin, clip, or pen causes direct connection of thepositive (+) and negative (-) terminals of thebattery. (These look like metal strips on thebattery.) This might happen, for example, when youcarry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery orthe connecting object.Leaving the battery in hot or cold places, such as ina closed car in summer or winter conditions, willreduce the capacity and lifetime of the battery.Always try to keep the battery between 15°C and25°C (59°F and 77°F). A device with a hot or coldbattery may not work temporarily, even when thebattery is fully charged. Battery performance isparticularly limited in temperatures well belowfreezing.Do not dispose of batteries in a fire as they mayexplode. Batteries may also explode if damaged.Dispose of batteries according to local regulations.Please recycle when possible. Do not dispose ashousehold waste.158Battery information
Do not dismantle or shred cells or batteries. In theevent of a battery leak, do not allow the liquid tocome in contact with the skin or eyes. In the eventof such a leak, flush your skin or eyes immediatelywith water, or seek medical help.Nokia batteryauthentication guidelinesAlways use original Nokia batteries for your safety.To check that you are getting an original Nokiabattery, purchase it from an authorised Nokiadealer, and inspect the hologram label using thefollowing steps:Successful completion of the steps is not a totalassurance of the authenticity of the battery. If youhave any reason to believe that your battery is notan authentic, original Nokia battery, you shouldrefrain from using it, and take it to the nearestauthorised Nokia service point or dealer forassistance. Your authorised Nokia service point ordealer will inspect the battery for authenticity. Ifauthenticity cannot be verified, return the batteryto the place of purchase.Authenticate hologram1. When you look at thehologram on the label, youshould see the Nokiaconnecting hands symbolfrom one angle and theNokia OriginalEnhancements logo whenlooking from another angle.2. When you angle thehologram left, right, downand up, you should see 1, 2,3 and 4 dots on each siderespectively.What if your battery is notauthentic?If you cannot confirm that your Nokia battery withthe hologram on the label is an authentic Nokiabattery, please do not use the battery. Take it to thenearest authorised Nokia service point or dealer forassistance. The use of a battery that is not approvedby the manufacturer may be dangerous and mayresult in poor performance and damage to yourdevice and its enhancements. It may also invalidateany approval or warranty applying to the device.159Battery information
To find out more about original Nokia batteries,visit www.nokia.com/battery.160Battery information
Care and maintenanceYour device is a product of superior design andcraftsmanship and should be treated with care. Thefollowing suggestions will help you protect yourwarranty coverage.●Keep the device dry. Precipitation, humidity, andall types of liquids or moisture can containminerals that will corrode electronic circuits. Ifyour device does get wet, remove the battery,and allow the device to dry completely beforereplacing it.●Do not use or store the device in dusty, dirtyareas. Its moving parts and electroniccomponents can be damaged.●Do not store the device in hot areas. Hightemperatures can shorten the life of electronicdevices, damage batteries, and warp or meltcertain plastics.●Do not store the device in cold areas. When thedevice returns to its normal temperature,moisture can form inside the device and damageelectronic circuit boards.●Do not attempt to open the device other than asinstructed in this guide.●Do not drop, knock, or shake the device. Roughhandling can break internal circuit boards andfine mechanics.●Do not use harsh chemicals, cleaning solvents, orstrong detergents to clean the device.●Do not paint the device. Paint can clog themoving parts and prevent proper operation.●Use a soft, clean, dry cloth to clean any lenses,such as camera, proximity sensor, and lightsensor lenses.●Use only the supplied or an approvedreplacement antenna. Unauthorized antennas,modifications, or attachments could damage thedevice and may violate regulations governingradio devices.●Use chargers indoors.●Always create a backup of data you want to keep,such as contacts and calendar notes.●To reset the device from time to time foroptimum performance, power off the device andremove the battery.These suggestions apply equally to your device,battery, charger, or any enhancement. If any device161Care and maintenance
is not working properly, take it to the nearestauthorized service facility for service.DisposalThe crossed-out wheeled-bin symbol on yourproduct, literature, or packaging reminds youthat in the European Union all electrical andelectronic products, batteries, andaccumulators must be taken to separate collectionat the end of their working life. Do not dispose ofthese products as unsorted municipal waste.Return the products to collection to preventpossible harm to the environment or human healthfrom uncontrolled waste disposal and to promotethe sustainable reuse of material resources.Collection information is available from the productretailer, local waste authorities, national producerresponsibility organizations, or your local Nokiarepresentative. For more information, see productEco-Declaration or country-specific information atwww.nokia.com.162Care and maintenance
Additional safety informationSmall childrenYour device and its enhancements may containsmall parts. Keep them out of the reach of smallchildren.Operating environmentThis device meets RF exposure guidelines whenused either in the normal use position against theear or when positioned at least 2.2 centimeters (7/8inch) away from the body. When a carry case, beltclip, or holder is used for body-worn operation, itshould not contain metal and should position thedevice the above-stated distance from your body.To transmit data files or messages, this devicerequires a quality connection to the network. Insome cases, transmission of data files or messagesmay be delayed until such a connection is available.Ensure the above separation distance instructionsare followed until the transmission is completed.Parts of the device are magnetic. Metallic materialsmay be attracted to the device. Do not place creditcards or other magnetic storage media near thedevice, because information stored on them may beerased.Medical devicesOperation of any radio transmitting equipment,including wireless phones, may interfere with thefunctionality of inadequately protected medicaldevices. Consult a physician or the manufacturer ofthe medical device to determine if they areadequately shielded from external RF energy or ifyou have any questions. Switch off your device inhealth care facilities when any regulations postedin these areas instruct you to do so. Hospitals orhealth care facilities may be using equipment thatcould be sensitive to external RF energy.Implanted medical devicesManufacturers of medical devices recommend thata minimum separation of 15.3 centimeters (6inches) should be maintained between a wirelessdevice and an implanted medical device, such as apacemaker or implanted cardioverter defibrillator,to avoid potential interference with the medicaldevice. Persons who have such devices should:163Additional safety information
●Always keep the wireless device more than 15.3centimeters (6 inches) from the medical devicewhen the wireless device is turned on.●Not carry the wireless device in a breast pocket.●Hold the wireless device to the ear opposite themedical device to minimize the potential forinterference.●Turn the wireless device off immediately if thereis any reason to suspect that interference istaking place.●Read and follow the directions from themanufacturer of their implanted medical device.If you have any questions about using your wirelessdevice with an implanted medical device, consultyour health care provider.Hearing aidsSome digital wireless devices may interfere withsome hearing aids. If interference occurs, consultyour service provider.VehiclesRF signals may affect improperly installed orinadequately shielded electronic systems in motorvehicles such as electronic fuel injection systems,electronic antiskid (antilock) braking systems,electronic speed control systems, and air bagsystems. For more information, check with themanufacturer, or its representative, of your vehicleor any equipment that has been added.Only qualified personnel should service the deviceor install the device in a vehicle. Faulty installationor service may be dangerous and may invalidate anywarranty that may apply to the device. Checkregularly that all wireless device equipment in yourvehicle is mounted and operating properly. Do notstore or carry flammable liquids, gases, or explosivematerials in the same compartment as the device,its parts, or enhancements. For vehicles equippedwith an air bag, remember that air bags inflate withgreat force. Do not place objects, including installedor portable wireless equipment in the area over theair bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installedand the air bag inflates, serious injury could result.Using your device while flying in aircraft isprohibited. Switch off your device before boardingan aircraft. The use of wireless teledevices in anaircraft may be dangerous to the operation of theaircraft, disrupt the wireless telephone network,and may be illegal.164Additional safety information
Potentially explosiveenvironmentsSwitch off your device when in any area with apotentially explosive atmosphere, and obey allsigns and instructions. Potentially explosiveatmospheres include areas where you wouldnormally be advised to turn off your vehicle engine.Sparks in such areas could cause an explosion or fireresulting in bodily injury or even death. Switch offthe device at refuelling points such as near gaspumps at service stations. Observe restrictions onthe use of radio equipment in fuel depots, storage,and distribution areas; chemical plants; or whereblasting operations are in progress. Areas with apotentially explosive atmosphere are often, but notalways, clearly marked. They include below deck onboats, chemical transfer or storage facilities andareas where the air contains chemicals or particlessuch as grain, dust, or metal powders. You shouldcheck with the manufacturers of vehicles usingliquefied petroleum gas (such as propane orbutane) to determine if this device can be safelyused in their vicinity.Emergency callsImportant: Wireless phones, including thisdevice, operate using radio signals, wirelessnetworks, landline networks, and user-programmed functions. Because of this,connections in all conditions cannot be guaranteed.You should never rely solely on any wireless devicefor essential communications like medicalemergencies.To make an emergency call:1. If the device is not on, switch it on. Check foradequate signal strength.Some networks may require that a valid SIM cardis properly inserted in the device.2. Press the end key as many times as needed toclear the display and ready the device for calls.3. Enter the official emergency number for yourpresent location. Emergency numbers vary bylocation.4. Press the call key.If certain features are in use, you may first need toturn those features off before you can make anemergency call. If the device is in the offline or flightprofile mode, you may need to change the profileto activate the phone function before you can make165Additional safety information
an emergency call. Consult this guide or your serviceprovider for more information.When making an emergency call, give all thenecessary information as accurately as possible.Your wireless device may be the only means ofcommunication at the scene of an accident. Do notend the call until given permission to do so.Certification information(SAR)This mobile device meets guidelines forexposure to radio waves.Your mobile device is a radio transmitter andreceiver. It is designed not to exceed the limits forexposure to radio waves recommended byinternational guidelines. These guidelines weredeveloped by the independent scientificorganization ICNIRP and include safety marginsdesigned to assure the protection of all persons,regardless of age and health.The exposure guidelines for mobile devices employa unit of measurement known as the SpecificAbsorption Rate or SAR. The SAR limit stated in theICNIRP guidelines is 2.0 watts/kilogram (W/kg)averaged over 10 grams of tissue. Tests for SAR areconducted using standard operating positions withthe device transmitting at its highest certifiedpower level in all tested frequency bands. The actualSAR level of an operating device can be below themaximum value because the device is designed touse only the power required to reach the network.That amount changes depending on a number offactors such as how close you are to a network basestation. The highest SAR value under the ICNIRPguidelines for use of the device at the ear is 0.50 W/kg.Use of device accessories and enhancements mayresult in different SAR values. SAR values may varydepending on national reporting and testingrequirements and the network band. Additional SARinformation may be provided under productinformation at www.nokia.com.Your mobile device is also designed to meet therequirements for exposure to radio wavesestablished by the Federal CommunicationsCommission (USA) and Industry Canada. Theserequirements set a SAR limit of 1.6 W/kg averagedover one gram of tissue. The highest SAR valuereported under this standard during productcertification for use at the ear is 0.79 W/kg andwhen properly worn on the body is 0.76 W/kg.Information about this device model can be foundat http://www.fcc.gov/oet/fccid by searching theequipment authorization system using FCC ID:PDNRM-421.166Additional safety information
IndexSymbols/Numerics1-touch dialing 116Aaccess codes 16access points 34, 149accessoriesSee enhancementsactivation keys 60active standby mode 97,141active toolbarin camera 63in gallery 74address bookSee contactsalarm clock 98alarm, calendar note 99albums, media 75anniversary notes 99answering calls 115application manager 134applications 134attachments 106, 107audio messages 103auto-update for time/date 98Bbacklight time-out 141barcodes 132batterypower saver setting 141saving power 17birthday notes 99blogs 28, 57Bluetooth connectivitydevice address 38device visibility 37pairing devices 38receiving data 38security 37sending data 37settings 36switching on/off 36wireless keyboard 40bookmarks 29brightness, display 141browserbookmarks 29browsing pages 26, 28cache memory 30downloads 29security 31settings 31widgets 28Ccable connection 40cache memory 30calculator 134calendar 99call waiting 116calls 114answering 115conference 115duration of 124internet calls 123log for 124options during 114recording 61rejecting 115settings 146cameracolour 71flash 66image quality 70imaging mode 64lighting 71167Index
scenes 66self-timer 67sequence mode 66settings 70video mode 69video quality 72cell broadcast messages 102certificates 144character encoding 103charts, spreadsheet 130clipboard, copying to 103clock 97, 98computer connections 40See also data connectionsconference calls 115configurationSee settingsconnection manager 35contactscopying 127default information 127deleting 126editing 126groups 128images in 126ringing tones 127saving 126sending 126synchronising 139voice tags 126convertercurrency 131copying text toclipboard 103copyright protection 60currencyconverter 131Ddata connectionscable 40device manager 140infrared 39modem 41PC connectivity 40synchronisation 139date and time 98declining calls 115device manager 140dialled numbers 124dismissing calls 115display settings 141document applications 130downloads 29DRM (digital rightsmanagement) 60duration of calls 124Ee-mail messages 106end all calls option 116enhancements settings 142Excel, Microsoft 130Ffactory settings,restoring 145faxing 41feeds, news 28Flash Player 57FM radio 50font settings 141Ggallery 73general information 15GPS (Global PositioningSystem) 85grid view of menus 97Hhelp application 15home network 80HSDPA (high-speed downlinkpacket access) 24IIAPs (internet accesspoints) 34168Index
imagesediting 76printing 79sharing online 80inbox, message 105indicators and icons 21installation ofapplications 135internet calls 121, 123connecting 122making 123profiles 122, 152settings 152internet connection 26See also browserIR (infrared) connectivity 39JJ2ME Java applicationsupport 134Java scripts/applications 134Kkeyguard 22, 143keypad 22, 143Llandmarks 92language settings 142light settings 141list view of menus 97location information 85lock code 16lockingkeypad 143locking keypad 22loudspeaker 22Mmailboxe-mail 106video 115voice 115main menu 97Maps 87mediaFlash Player 57music player 45radio 50RealPlayer 56streaming 56voice recorder 61meeting notes 99meetings, setting up 99memo notes 99, 131memoryclearing 18web cache 30messagese-mail 106folders for 101icon for incoming 105multimedia 106settings 108voice 115Mini Map 28MMS (multimedia messageservice) 103, 106multimedia menu 24multimedia messages 103,106music player 45muting sound 115my numbers 126Nnavigation tools 85network settings 147news feeds 28Nokia Lifeblog 57notes 131numberstext entry of 103Ooffline mode 23one-touch dialing 116operator logo 142169Index
options menu for calls 114outbox, message 101Ppacket data connectionaccess point settings 149counters 124settings 151page overview 28PDF reader 131personal certificates 144personalisation 95, 141phonebookSee contactsphotographsSee cameraPictBridge 79PIN code 16PIN2 code 16positioning information 85positioning settings 145power saver 141PowerPoint, Microsoft 130predictive text entrymode 102presentations,multimedia 78, 106, 130printingimages 79print basket 75profilesinternet call profile 122,152offline restrictions 23proxy settings 150PUK codes 16punctuation, text entry 103QQuickmanager 131Quickpoint 130Quicksheet 130Quickword 130Rradio 50RealPlayer 56recordingcalls 61sounds 61recording video clips 69redial feature 146rejecting calls 115remote mailbox 106remote SIM mode 39ringing tones 95, 96roaming 147Sscenes, image and video 66screen settings 141securitycertificates 144web browser 31WEP 150WPA 151security code 16security module 145self-timer, camera 67sent messages folder 101service commands 101service messages 106setting wizard 19settingsaccess point namecontrol 152access points 149applications 153Bluetooth connectivity 36call barring 147call divert 147calls 146camera 70certificates 144configuration 152display 141enhancements 142home network 81internet call 152language 142170Index
network 147packet data 151packet data accesspoints 149personalisation 141positioning 145RealPlayer 56shortcuts 142SIP 152standby 141tv-out 142Video Centre 44video sharing 119web browser 31WLAN 151, 152WLAN internet accesspoints 150shared video 119shooting modes, camera 66shortcuts 142signature, digital 144SIM cardcontacts 128messages 108SIM card security 143SIP 152slide show 76SMS (short messageservice) 103software applications 134software update 15songs 45speaker phone 22special characters, textentry 103standby mode 97, 141streaming media 56Symbian applications 134synchronisation of data 139Ttemplates, message 104text entry 102text messagesreceiving and reading 105replying to 105sending 103settings 109SIM messages 108themes 95time and date 98time zone settings 98time-out for backlight 141tonesring settings 95, 96settings 141toolbar 63, 74transferring data 19transferring music 48troubleshooting 154trust settings 144TV configuration 142tv-out mode 77Uunlocking keypad 22, 143UPIN code 16UPnP (Universal Plug and Playarchitecture) 80UPUK code 16USB cable connection 40Vvideo calls 117, 118options during 118video clipsshared 119Visual Radio 50voice applications 139voice callsSee callsvoice commands 116, 139voice over IP 123voice over IP (VOIP) 121voice recorder 61VoIP 123volume controls 22Wwallpaper 95171Index
web connection 26web logs 28, 57week settings, calendar 99welcome 19welcome note 141WEP 150widgets 28wireless keyboard 40wireless LAN (WLAN) 33wireless LAN settings 152Word, Microsoft 130world clock 98WPA 151Zzip manager 132zooming 65, 69172Index

Navigation menu