Microsoft RM-211 CDMA 800 Cellular Phone User Manual N6066 UG EN FCC 060831

Microsoft Mobile Oy CDMA 800 Cellular Phone N6066 UG EN FCC 060831

Manual

N6066_UG_EN_FCC_060831.fm Page 0 Friday, September 1, 2006 11:26 AM Nokia 6066 User Guide
N6066_UG_EN_FCC_060831.fm Page 1 Friday, September 1, 2006 11:26 AM LEGAL INFORMATION PART NO. 9249063, ISSUE NO. 1 Copyright ©2006 Nokia. All rights reserved. Nokia, Nokia Connecting People, Nokia 6066, Pop-Port™, and the Nokia Original Enhancements logos are trademarks or registered trademarks of Nokia Corporation. Other company and product names mentioned herein may be trademarks or trade names of their respective owners. Includes RSA BSAFE cryptographic or security protocol software from RSA Security. The information contained in this user guide was written for the Nokia 6066 products. Nokia operates a policy of ongoing development. Nokia reserves the right to make changes to any of the products described in this document without prior notice. UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANYTIME WITHOUT PRIOR NOTICE. EXPORT CONTROLS This device may contain commodities, technology, or software subject to export laws and regulations from the U.S. and other countries. Diversion contrary to law is prohibited. FCC/INDUSTRY CANADA NOTICE Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by Nokia could void the user’s authority to operate this equipment. 1
N6066_UG_EN_FCC_060831.fm Page 2 Friday, September 1, 2006 11:26 AM Contents Contents 1. Phone at a glance........................................................................ 72. Set up your phone..................................................................... 123. Text entry................................................................................... 204. Uni .............................................................................................. 275. Messages .................................................................................... 316. Log.............................................................................................. 417. Contacts ..................................................................................... 448. Gallery ........................................................................................ 529. Media.......................................................................................... 5510.Settings..................................................................................... 6011.Organiser .................................................................................. 7712.Games ....................................................................................... 8713.Enhancements .......................................................................... 8814.Battery information ................................................................. 902
N6066_UG_EN_FCC_060831.fm Page 3 Friday, September 1, 2006 11:26 AM For your safety For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety. INTERFERENCE Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. SWITCH OFF IN HOSPITALS Follow any restrictions. Switch the device off near medical equipment. SWITCH OFF IN AIRCRAFT Follow any restrictions. Wireless devices can cause interference in aircraft. SWITCH OFF WHEN REFUELING Do not use the device at a refueling point. Do not use near fuel or chemicals. SWITCH OFF NEAR BLASTING Follow any restrictions. Do not use the device where blasting is in progress. USE SENSIBLY Use only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily. QUALIFIED SERVICE Only qualified personnel may install or repair this product. ENHANCEMENTS AND BATTERIES Use only approved enhancements and batteries. Do not connect incompatible products. 3
N6066_UG_EN_FCC_060831.fm Page 4 Friday, September 1, 2006 11:26 AM For your safety WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS Ensure the device is switched on and in service. Press the end key as many times as needed to clear the display and return to the main screen. Enter the emergency number, then press the call key. Give your location. Do not end the call until given permission to do so. 4
N6066_UG_EN_FCC_060831.fm Page 5 Friday, September 1, 2006 11:26 AM Welcome Welcome Congratulations on your purchase of the Nokia 6066 mobile phone. Your phone provides many functions practical for daily use, such as a hands-free loudspeaker, alarm clock, calculator, calendar, and more. Your phone can also connect to a PC, laptop, or other device using a data cable. To personalise your phone, you can set your favorite ring tones. ■About your device The wireless devices described in this guide are approved for use on the CDMA 800 networks. Contact your service provider for more information about networks. When using the features in this device, obey all laws and respect privacy and the legitimate rights of others. Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless phone use may cause interference or danger. ■Network Services To use the device you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize them. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services. Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Contact your service provider for more information. ■Shared memory The following device features may share memory: contacts; text messages; photos, images, and tones in gallery; calendar notes; games; and applications. Use of one or more of these features may reduce the memory available for the 5
N6066_UG_EN_FCC_060831.fm Page 6 Friday, September 1, 2006 11:26 AM Welcome remaining features sharing memory. If your phone displays a message that the memory is full when you try to use a shared memory feature, delete some of the information or entries stored in the shared memory features before continuing. Some of the features, such as photos, images, and tones in gallery; text messages; and applications may have a certain amount of memory specially allotted to them in addition to the memory shared with other features. 6
N6066_UG_EN_FCC_060831.fm Page 7 Friday, September 1, 2006 11:26 AM Phone at a glance 1. Phone at a glance • Earpiece port (1) • Display screen (2) • Left selection key (3) • Call key (4) • Keypad (5) • Microphone (6) • Four-way scroll and center selection key (7)• Right selection key (8) • Power key and end key (9) • Charger port (10) • Connector (USB port for service only) (11) ■Keys and parts •Headset connector(1)• Volume key (2) • Loudspeaker (3) • Mini display (4) • Camera flash (5) • Camera lens (6) 7
N6066_UG_EN_FCC_060831.fm Page 8 Friday, September 1, 2006 11:26 AM Phone at a glance • Voice command key (7) • Camera and Video key (8)The voice key functions are as follows:• Short press—Answer an incoming call. • Long press—Answer or make a voice call. ■Standby mode Depending on your wireless service provider and the model number of your phone, some or all of the following selection keys may appear in the standby mode. The standby mode is home base and indicates your phone is in the idle state.Signal strength—A higher bar (at the upper left corner) indicates a stronger network signal.Uni —Press the center selection key to select this option.Menu—Press the left selection key to select this option.Go to—Press the right selection key to select this option. Battery level—A higher bar (at the upper right corner) indicates more power in the battery. Menu Go to ■Quick keys Note: Depending on your wireless service provider and the model number of your phone, some or all of the following Quick keys may appear in the standby mode. In the standby mode, the four-way scroll key instantly takes you tofrequently-accessed menus:Scroll up key—Go to Calendar.Scroll right key—Go to U-Mail.Scroll down key—Go to the contacts list.Scroll left key—Quickly create a text message.Center selection key—Go to Uni.8
N6066_UG_EN_FCC_060831.fm Page 9 Friday, September 1, 2006 11:26 AM Phone at a glance ■Indicators and icons Depending on your wireless service provider and the model number of your phone, some or all of the following indicators and icons may appear in the standby mode. You have new text or picture messages. See "Text messages," p. 31. You have missed a call. See "View missed calls," p. 41. You have new voice messages. See "Voice messages," p. 38. This icon shows only when network supports this function. Your phone keypad is locked. See "Keyguard," p. 19. Your phone is set to the silent profile. See "Profiles," p. 60.The alarm clock is set to on. See "Alarm clock," p. 77.The countdown timer is running.The stopwatch timer is running in the background. Integrated hands-free is active. See "Loudspeaker," p. 18. The timed profile is selected. See "Profiles," p. 60. An headset is connected to the phone. See "Enhancement settings," p. 72. ■Phone menus Phone features are grouped according to function and are accessed through the main menus. Each main menu contains submenus and lists from which you can select or view items and customise your phone features. To access these menus and submenus, use the scroll method or a shortcut. You can change your menu view from list to grid. Select Menu > Options > Main menu view > List or Grid. Note: Some features may not be available, depending on your network. For more information, contact your wireless service provider. Scroll method You can use the four-way scroll key to scroll up, down, left, and right through the options. 1. In the standby mode, select Menu, to scroll through the main menus.9
N6066_UG_EN_FCC_060831.fm Page 10 Friday, September 1, 2006 11:26 AM Phone at a glance As you scroll through the menus, the menu number appears in the upper right corner of the display. Below the battery level indicator is a scroll bar with a tab that moves up or down on the right side of the display screen as you scroll through the menus, providing a visual representation of your current position in the menu structure. 2. When you arrive at a menu, press the center selection key to select submenus. • Select Back (the right selection key) to return to the previous menu. • Press the end key to return to the standby mode from any menu or submenu. In-phone help Many features have brief descriptions (help text) you can view on the display. To view these descriptions, you must first activate help text as follows. In the standby mode, select Menu > Settings > Phone > Help text activation > On or Off. Scroll to a feature and wait about 14 seconds. Scroll down to view all of the description, or select Back to exit. ■Security code settings Your device has a security option allowing you to lock your phone with a PIN code. When the PIN code is set and turned on, no outgoing calls are allowed and the menu cannot be accessed without entering the correct code first. This prevents unauthorized outgoing calls or access to any information stored on your device. The PIN code option is in the Settings menu. The first time you access the Security option, you must enter a PIN code. The default PIN code may vary depending on your wireless service provider who provided your UIM card. The PIN code protects the UIM card from unauthorized access. The PIN code can be 4–8 digits in length. After three successive incorrect entries, the PIN code is blocked. You need to enter the personal unblocking key (PUK) code. See "Personal unblocking key (PUK) code," p. 72. 10
N6066_UG_EN_FCC_060831.fm Page 11 Friday, September 1, 2006 11:26 AM Phone at a glance ■Go to functions The Go to menu enables you to change the function of the right selection key on your phone. With this function, you can quickly access your most frequently used functions from the Go to menu in the standby mode. Choose Go to functions 1. In the standby mode, select Go to > Options > Select options. 2. Scroll up or down to highlight the desired function. 3. Select Mark to add a function or Unmark to remove a function. 4. Select Done when you have added all desired functions. 5. Select Yes to save the changes. 6. In the standby mode, select Go to to display a list of the functions you selected in step 2. Organise functions 1. In the standby mode, select Go to > Options > Organise. 2. Scroll up or down to highlight the function you want to rearrange, and select Move > Move up, Move down, Move to top, or Move to bottom. 3. Select Done > Yes to save the changes. 11
N6066_UG_EN_FCC_060831.fm Page 12 Friday, September 1, 2006 11:26 AM Set up your phone 2. Set up your phone ■Antenna Your device has a fixed antenna located at the top of the phone with the fold closed. Hold the phone with the antenna area pointed up and over your shoulder.Note: Do not touch the antenna unnecessarily with the device switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Not touching the antenna area during a phone call optimizes the antenna performance and battery life. ■Battery Note: Always switch off the power, and disconnect the charger and any other device before removing the cover. Avoid touching electronic components while changing the cover. Always store and use the device with the cover attached. Remove the back cover 1. With the back of the phone facing you, push down on the back cover.2. Slide the back cover toward the bottom of the phone and remove.12
N6066_UG_EN_FCC_060831.fm Page 13 Friday, September 1, 2006 11:26 AM Set up your phone Remove the battery 1. After you have removed the back cover, insert your finger into the finger grip.2. Lift the battery upward from it’s compartment.Note: Always switch off the device, and disconnect the charger before removing the battery.UIM (CDMA SIM) card installation The User Identity Module (UIM), also called the CDMA Subscriber Identity Module (SIM), card and its contacts can be easily damaged by scratches or bending, so be careful when handling, inserting, or removing the card. The UIM card slot is built into the mechanics, located under the battery. Before installing the UIM card, always make sure that the phone is switched off and that you have removed the cover and battery.Keep all UIM cards out of the reach of small children.1. Remove the back cover and battery first. 2. Keep the beveled corner of the UIM card facing up and matching along the corresponding beveled corner of the card holder.13
N6066_UG_EN_FCC_060831.fm Page 14 Friday, September 1, 2006 11:26 AM Set up your phone 3. Insert the UIM card into the holder with the gold-coloured contacts facing down, matching up with the gold-coloured contacts on the phone.Replace the battery 1. Insert the battery, gold-coloured contact end first, into the battery slot.2. Push down on the other end of the battery to snap the battery into place.Replace the back cover 1. Set the back cover on the phone with the cover tabs aligned with the slots in the phone.2. Slide the back cover toward the top of the phone until the back cover is securely in place.Charge the battery Note: Before you use a charger with this device, check its model number. This device is intended for use when supplied with power from the AC-3 or AC-4 charger. 1. Plug the charger transformer into a standard ac outlet. 14
N6066_UG_EN_FCC_060831.fm Page 15 Friday, September 1, 2006 11:26 AM Set up your phone 2. Insert the charger output plug intothe round jack at the bottom end of the phone.After a few seconds, the battery indicator in the display starts to scroll from bottom to top. If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made. The ACP-7 can also be used to charge the phone, but must be used with the CA-44 adaptor included in the box. 1. Plug the charger transformer into a standard ac outlet. 2. Insert the charger output plug into the CA-44 adapter jack. Insert the CA-44 plug into the jack on the bottom of the phone. Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. ■Turn your phone on or off 1. To turn your phone on or off, press and hold the end key on the keypad for at least 4 seconds. 2. Enter the security code, if necessary, and select OK. See "Security settings," p. 70. 15
N6066_UG_EN_FCC_060831.fm Page 16 Friday, September 1, 2006 11:26 AM Set up your phone Warning: Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. ■Connect the headset A compatible headset may be purchased with your phone or separately as an enhancement. See "Enhancement settings," p. 72. 1. Plug the headset connector into the connector at the top of your phone. appears in the standby mode. 2. Position the headset on your ear.With the headset connected, you can make, answer, and end calls as usual.• Use the keypad to enter numbers.• Press the call key to place a call. See "Phone at a glance," p. 7.• Press the end key to end a call. You can also plug a compatible headset, such as a standard universal headset, into the 2.5-mm headset jack on the right side of your phone to allow hands-free operation. See "Enhancement settings," p. 72. ■Make a call Keypad 1. Enter the phone number (including the area code), and press the call key. (To delete a character to the left of the cursor, select Clear.) 2. Press the end key to end the call, or select End call to cancel the call attempt. Contacts list 1. In the standby mode, scroll down to display your contacts list and highlight your desired entry. 2. Select Details to highlight your desired number, and then select Call. 16
N6066_UG_EN_FCC_060831.fm Page 17 Friday, September 1, 2006 11:26 AM Set up your phone Last dialled number 1. In the standby mode, press the call key to display the last 30 numbers dialled. 2. Scroll to the number (or name) you want to redial, and press the call key. Conference calling Conference calling is a network service that allows you to take part in a conference call with two other participants. 1. Make a call to the first participant. 2. With the first participant on the line, select Options > New call. 3. Enter the phone number of the second participant, or select Search to retrieve a number from the contacts list. Select Call. The first participant is put on hold. 4. When the second participant picks up, press the call key to connect the calls. 5. To end the conference call, select Options > End all calls, or press the end key. ■Answer calls An incoming call 1. With the fold open, press the call key, or select Answer to answer the call. 2. Press the end key to reject the call. Select Silence to mute the ringing tone, then Dismiss, or do nothing. With your phone set to silent in the profiles menu, select Dismiss to reject the incoming call. 3. With the fold closed, press the volume key to mute the ringing tone. A short press of the voice key answers an incoming call with the loudspeaker. By default, your phone answers an incoming call when you open the fold. You can change the setting to not answer the call when the fold opens. In the standby mode, select Menu > Settings > Call > Answer when fold is opened > On or Off. 17
N6066_UG_EN_FCC_060831.fm Page 18 Friday, September 1, 2006 11:26 AM Set up your phone Adjust the earpiece volume Whether in or out of a call, you can scroll the volume key located on the left side of your device up or down to adjust the volume of the earpiece. When you adjust the volume, a bar chart indicates the volume level. Answer a call with the keypad locked To answer a call with the keypad locked, press the call key with the fold open. To answer a call with the fold closed and the keypad locked, press and hold the voice key to answer with the loudspeaker. During the call, all features function as normal. When you end or reject the call, the keypad automatically relocks. See "Keyguard," p. 19. When the keypad lock is on, calls still may be possible to the official emergency number programmed into your device. Enter the emergency number, and press the call key. Loudspeaker Warning: Do not hold the device near your ear when the loudspeaker isin use, because the volume may be extremely loud.You can use your phone as a loudspeaker during a call.• To activate the loudspeaker while in a call with the fold open, select Loudsp.. • To activate the loudspeaker when answering a call with the fold closed, press the voice key. • To deactivate the loudspeaker during a call, with the fold open, select Normal. The loudspeaker is deactivated automatically when a call (or a call attempt) ends or when certain enhancements are connected. Call options Many of the options you can use during a call are network services. Check with your wireless service provider for more information. 1. Select Options during a call to display the following options: Loudspeaker —Activate or deactivate the loudspeaker while in a call. New call—Initiate a conference call. See "Conference calling," p. 17. Save—Save a number while in a call to your contacts list. This option is available only when entering numbers during a call. 18
N6066_UG_EN_FCC_060831.fm Page 19 Friday, September 1, 2006 11:26 AM Set up your phone Add to contact—Add a phone number to an existing contact in your contactslist while in a call. This option is available only when entering numbers during a call.End all calls—Disconnect from all active calls.Send DTMF—Enter the numbers, and select DTMF to send the numbers astones.Contacts—View the contacts menu.Menu—View the phone menu.2. Select an option to activate the option or enter its submenu. ■Keyguard With keyguard, you can lock the keypad to prevent keys from being pressed accidentally. The locked keypad unlocks when you receive a call. After the call, the lock automatically reactivates. With the keyguard on, calls still may be possible to the official emergency number programmed into your phone. Enter the emergency number, and press the call key. Lock the keypad Select Menu with the left selection key; then press * within 2 seconds. Unlock the keypad Select Unlock with the center selection key; then press * within 2 seconds. 19
N6066_UG_EN_FCC_060831.fm Page 20 Friday, September 1, 2006 11:26 AM Text entry 3. Text entry The input methods available in the phone are preset according to the marketwhere it will be sold.This phone supports simplified Chinese input methods.When the phone’s language is set to simplified Chinese, you can use predictivePinyin and Stroke input methods to enter simplified Chinese.You can also activate predictive English input method to edit English message.This method reduces times of pressing key rather than traditional English input method, so enhances the speed of entry extremely.■Input method indicators Input method indicators are shown at the upper left corner of the display. The names of the input methods and the corresponding indicators on the display are shown below. Pinyin Stroke Upper case Lower case Number input Note that the default input method and the input methods available in specific circumstance have been presetted in the phone. Always check the indicator on the display to see which input method is in use. ■Switch between input methods • Activate the predictive English input method: 1. When editing text message (Create message), press Options, then select Dictionary on; 2. Zi Dictionary On will be displayed briefly on your phone screen. • Deactivate the predictive English input method: 20
N6066_UG_EN_FCC_060831.fm Page 21 Friday, September 1, 2006 11:26 AM Text entry 1. When editing text message (Create message), press Options, then select Dictionary off; 2. Zi Dictionary Off will be displayed briefly on your phone screen. • Press # repeatedly to switch between these input methods; • Press and hold # to quickly switch between Number input method and other input methods; ■Predictive pinyin input method With predictive pinyin input method, you only need press the number keys on which pinyin symbols are printed to input the pinyin of Chinese characters.For example, to input "kuai", you only need to press 5, 8, 2, 4.The pinyin letters (pinyin letters combinations) displayed on the screen change with pressing the number keys. Ignore these changes before you finish inputting the last pinyin letter.Use predictive pinyin input method 1. Input pinyin letters and tone marks: Press the corresponding number keys to input pinyin letters for each Chinese character. Press the key 1 repeatedly to enter your desired tone mark. 2. Find different matching items: If there are several pinyin combinations matching the number key you pressing, press * to find other possible matching items. You can enter tone mark firstly, or find matching item firstly, both are OK. 3. Clear pinyin letters or tone marks: Press Clear to delete pinyin letters or tone marks to the left of the cursor. Press and hold Clear to delete pinyin letters or tone marks to the left of the cursor more quickly. 4. Input Chinese characters: Press 0 to flip the candidate list; Press the left or right scroll key to highlight the desired Chinese character, then press OK to select the highlighted Chinese character. 5. Predictive: Your phone can predictive the next Chinese character which could make up a phrase with the first inputted Chinese character. Press 0 to flip the candidate list; Press the left or right scroll key to highlight the desired 21
N6066_UG_EN_FCC_060831.fm Page 22 Friday, September 1, 2006 11:26 AM Text entry candidate character, then press OK to select the highlighted Chinese character. 6. Exit predictive: You phone will keep predictive function until you select Back. You need to input pinyin letter for the next Chinese character.If all predictive Chinese characters are not your desired, press Back to delete the predictive characters, or input the pinyin letter for the next Chinese character directly.7. Clear inputted characters: After clearing all pinyin letters and tone marks, press Clear to delete the character to the left of the cursor; Press and hold Clear to delete the character to the left of the cursor more quickly. Use the down and up scroll keys to move the cursor. Predictive pinyin input example: To input 生日快乐1. Enter into Create message. 2. Input pinyin letter sheng for 生: Press 7, 4, 3, 6, 4 in sequence, and finally press 1 once for the first tone. 3. Select 生 from candidate list, then press OK. 4. Press right scroll key to select 日 from predictive character list, then press OK. 5. Input pinyin letter kuai for 快: Press 5, 8, 2, 4 in sequence, and finally press [1] twice for the fourth tone. 6. Select 快 from candidate list, then press OK. 7. Select 乐 from predictive character list, then press OK. 8. You phone will keep predictive function until you select Back. ■Stroke input method The strokes constituting Chinese characters have been divided into five categories: horizontal, vertical, left-falling, dot, and turning. Each category corresponds to a number key from 1 to 5, respectively. 22
N6066_UG_EN_FCC_060831.fm Page 23 Friday, September 1, 2006 11:26 AM Text entry The strokes are classified according to the following table. Use Stroke input method 1. Input strokes: You could press the number keys to input the strokes according to the standard stroke order. Tip! If you are not sure about a certain stroke classification, press 6 as a substitution for that stroke, then continue with the subsequent strokes. A question mark appears in the input area to represent that stroke. 2. Clear the strokes you just inputed: selecting Clear deletes the Chinese character to the left of the cursor; selecting and holding Clear deletes the inputted Chinese characters more quickly. 23
N6066_UG_EN_FCC_060831.fm Page 24 Friday, September 1, 2006 11:26 AM Text entry 3. Character input: Press 0 to go through in the candidate list; press left scroll key or right scroll key to highlight the Chinese character you want in the candidate list. Press OK to select the highlighted character. 4. Prediction: You phone will keep predictive function until you select Back. Press 0 to go through in the candidate list; press left scroll key or right scroll key to highlight the Chinese character you want in the candidate list. Press OK to select the highlighted character. 5. End prediction: You phone will keep predictive function until you select Back. You can continue enter strokes for the next character.If the current predictive list does not show your desired character, press Backto delete predictive character, or enter the new strokes for the next character.6. Clear all strings you entered: After deleting all strokes of a character, press Clear to delete the characters to the left of the cursor; press and hold Clear to delete the inputted characters more quickly. Press down scroll key and up scroll key to move the cursor. Stroke input example: To input 你好1. Enter into the Creat message. 2. Input the stroke for 你: Press 3, 2, 3, 5 and 2. 3. Select 你 from the candidate list, and then press OK. 4. Select the character 好from the predictive list, and then press OK. 5. You phone will keep predictive function until you select Clear. ■Traditional English input 1. Switch the input method to Upper Case status or Lower Case status, please see "Switch between input methods" on page 20. 2. Press a number key (2 - 9) to enter the first letter on the key, press twice to enter the second letter on the key and so on.If the next letter is located on the same key as the present one, press the down scroll key or upward scroll key to finish the previous letter; or wait until the cursor appears.24
N6066_UG_EN_FCC_060831.fm Page 25 Friday, September 1, 2006 11:26 AM Text entry 3. Press Clear to delete one letter to the left of the cursor. Press and hold Clear to delete letters to the left of the cursor more quickly. ■Enter space To insert a space, press 0.If you are under number mode, please switch to any other input mode first. (See "Switch between input methods" on page 20.)■Enter number • Switch the input method to number mode (See "Switch between input methods" on page 20.), and then enter the number directly by pressing the responding number key. • If you are under "Predictive English" or "Traditional English" input mode, you can enter number by pressing the responding number key. • If you are under "Traditional English" input mode, press the responding number key till the number you desired appears on the display. ■Enter special characters and punctuation marks • If you are under Pinyin, Stroke, Traditional English or Number input method, press * to view the list of special characters and punctuation marks, scroll to the desired one, then press OK. To scroll through the list more quickly, press 2, 4, 6 or 8 and then press OK to enter. • If you are under Pinyin or Traditional English input mode, press 1 repeatedly to enter some frequently used Chinese or English punctuation marks. ■Predictive English input With predictive English input, you can enter any letter in the word you want by simply pressing the responding number key. The predictive English input is based on a built-in dictionary to which you can also add new words. 1. At text entry screen, select Options and then select Dictionary on or Dictionary off to activate or deactivate predictive English input.If the predictive English input is on, select the desired language.25
N6066_UG_EN_FCC_060831.fm Page 26 Friday, September 1, 2006 11:26 AM Text entry 2. Start writing a word using the keys 2 to 9. Press each key only once for one letter. You must switch to the input method that the first letter is capital, then you can enter out the word Nokia. The following illustration shows your text entry of the word Nokia in predictive text mode. With the English dictionary selected, press each of the following number keys once, and the screen will display Nokia by predicting the appropriate letter to use based on your keypad entry: 6 6 5 4 2 No Onl Noki Nokia3. When you finish writing the word and it is correct, to confirm it and add a space, press 0 to insert a space for confirmation. If the word is not correct, press * repeatedly until the desired word appears, and confirm it; or select Options > Matches and the word you want. If the ? character is displayed after the word, the word you intended to write is not in the dictionary. To add the word to the dictionary, select Spell. The phone displays the entered letters. Complete the word using traditional text input, and select Save. ■Change case and mode Press # to switch between uppercase, lowercase, and sentence case text. As you press #, the following icons (not the descriptions) appear in the upper left of the display screen:. Uppercase text: standard mode is on. Lowercase text: standard mode is on. Sentence case text: standard mode is on. This option is available only at the beginning of a sentence. Note: You can press # within 2 seconds to switch between standard mode and predictive text mode. Lowercase text: predictive text is on. Sentence case text: predictive text is on. This option is available only at the beginning of a sentence. 26
N6066_UG_EN_FCC_060831.fm Page 27 Friday, September 1, 2006 11:26 AM Favourites 4. Favourites All features and options under the Favourites menu are network services. Their availability and operation depend entirely on your service provider. Always check with your service provider for detailed information about availability, subscription, and charging rates of the services. See "Network services," p. 73. Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site. ■Sign on to the mobile Internet In the standby mode, select Menu > Favourites > Services. After a brief pause, your device attempts to connect to your wireless service provider’s home page. If you receive an error message, your device may not be set up for browsing. Contact your wireless service provider to make sure that your device is configured properly. ■Navigate the mobile Internet Since your device screen is much smaller than a computer screen, mobile Internet content is displayed differently than you may be accustomed to seeing. This section contains guidelines to use phone keys to navigate a WAP site. Phone keys • To browse the WAP site, scroll up or down. • To select a highlighted item, press Select. • To enter letters and numbers, press a key from 0–9. • To enter special characters, press *. Receive a call while online Depending on your wireless service provider, you may still be able to receive a voice call while using the WAP browser. • To answer the incoming call, press the call key. 27
N6066_UG_EN_FCC_060831.fm Page 28 Friday, September 1, 2006 11:26 AM Favourites • To reject the incoming call, press the end key. After you end your voice call, the mobile Internet connection automatically resumes. Disconnect To close your mobile Internet connection, press the end key. ■U-Mail U-Mail enables you to receive e-mail with a multimedia attachment between mobile phone and mobile phone, or mobile phone and Internet e-mail address. Apply CDMA 1X data service from your service provider before using U-Mail. Account registration In the standby mode, select Menu > Favourites > U-Mail > E-mail settings > Register accnt.. Check with your service provider for detailed U-Mail function and operation. ■U-Info access Because mobile Internet content is designed to be viewed from your device, your wireless service provider is now your mobile Internet service provider as well. It is likely that your wireless service provider has created a home page and set up your browser to go to this page when you log on to the mobile Internet. At your service provider’s home page, you may find links to a number of other sites. It should not be necessary to manually configure the browser on your device. Normally this is done by your wireless service provider after you subscribe to the feature. Contact your wireless service provider if you have problems using the browser. ■UNI-INFO If your wireless service provider supports this feature, then you can view weather reports, check flight times, view financial information, and much more. Check with your service provider for details. In the standby mode, select Menu > Favourites > Info. 28
N6066_UG_EN_FCC_060831.fm Page 29 Friday, September 1, 2006 11:26 AM Favourites ■Online calls Receive a call while online If your data connection is not active, you may still be able to receive a voice call while you use the WAP browser. • To answer the incoming call, press the call key. • To reject the incoming call, press the end key (a network-dependent feature). While in the voice call, you are not able to load new pages in the browser. After you end your voice call, you must initiate activation of your Internet connection. Note: If your data connection is active, the incoming calls are automatically diverted to voice mail, depending on your network service. Make an emergency call while online You can end your data connection and make an emergency call. 1. To close your mobile Internet connection, press the end key. 2. Press the end key as many times as needed to clear the display and ready the device for calls. 3. Enter the emergency number for your present location (for example, 911). Emergency numbers vary by location. 4. Press the call key. ■Clear the cache and disconnect A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed are stored in the cache. To empty the cache while in the browser menu, select Browser menu > Advanced > Cache > Clear disk Cache from the home page. The cache is also cleared when you power off your device. To close your mobile Internet connection while browsing, press the end key. 29
N6066_UG_EN_FCC_060831.fm Page 30 Friday, September 1, 2006 11:26 AM Favourites ■My Documents You can use My Documents to organize your files, images, video clips, musics etc. You can also download these materials from Internet and organize them into relevant folders. In the standby mode, select Menu > Favourites > My Documents > Images, Video clips, Themes, Graphics, Tones, Recordings. ■Music Street Music Street had some suggested solutions of music management. You canaccess the following options:Order music—Voice program, listen to and order hot line for wonderful piece, dial 10155;Listen to SMS—Voice message, send leave word, dial 10158;Personal Stereo—Pop songs, fun stories, dial any problem, please contact 10159.Help—Any problem, please contact 10010.■Bookmarks The bookmarks view opens when you open Services.Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions for security or content as you would with any Internet site.30
N6066_UG_EN_FCC_060831.fm Page 31 Friday, September 1, 2006 11:26 AM Messages 5. Messages If you have subscribed to a message network service, you can send and receive messages to compatible phones also subscribed to a message service. You can send and receive short message and e-mail messages if supported by your service provider. Also, you can make distribution lists that contain phone numbers and names from your contacts list. See "Distribution list," p. 35. When composing text or picture messages, check the number of characters allowed in the top right corner of the message. Using Unicode characters takes up more space. With Unicode characters in your message, the indicator may not show the message length correctly. Before sending the message, the phone tells you if the message exceeds the maximum length allowed for one message. Important: Exercise caution opening messages. Messages may contain malicious software or otherwise be harmful to your device or PC. Note: When you send a message, your device may display Message sent, indicating your device has sent the message to the message center number programmed into your device. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your service provider. ■Text messages Compose and send 1. In the standby mode, select Menu > Messages > Text messages > Create message.To go quickly to Create message, scroll left in the standby mode.2. Compose and send a message using the keypad. Depending on the messaging service enabled, you can select Options to use some or all of the following options while composing your message: Preview—Preview the message when sending a picture message (only available with a picture inserted). Sending options—Mark or Unmark the sending options of a single message as Urgent, Delivery reports or Signature (not available with a picture inserted). See "Change sending options," p. 36. 31
N6066_UG_EN_FCC_060831.fm Page 32 Friday, September 1, 2006 11:26 AM Messages Clear text—Erase all the text from the message editor.Insert picture—Insert a picture from a templates folder into your message.Change picture—Change the picture in a picture message (only available with a picture inserted).Delete picture—Delete the picture in a picture message (only available with a picture inserted).Insert contact—Insert a name from your contacts list into your message.Insert number—Insert a phone number or find a phone number in the contacts list.Save—Select Drafts to save the message in the drafts folder; select Templatesto save the message as one of your predefined templates in the templates folder.Exit editor—Exits the message editor.Use template—Insert a predefined template into your message.Insert smiley—Insert a smiley into your message.Insert word—Enter the text of a new word that might not appear in thepredictive text dictionary (only available with predictive text on).Insert symbol—Insert a special character into your message (only available with predictive text on).Writing language—Choose the language of the text editor.Dictionary on or Dictionary off—Turn the predictive text on or off.When Chinese is selected as the writing language, the following options areavailable:Pinyin—Enter Chinese characters with the Pinyin method.Stroke—Enter Chinese characters with the Stroke method.ABC—Write a text message in uppercase mode.abc—Write a text message in lowercase mode.Number—Write a text message in number mode.Writing instruct.—Read the instructions on using shortcuts keys to enter characters and symbols in a text message (only available with Pinyin or Stroke input method is enabled).32
N6066_UG_EN_FCC_060831.fm Page 33 Friday, September 1, 2006 11:26 AM Messages Copy—You can copy a message to send.Cut—You can cut a message to send.Paste—You can paste a message to clipboard to send later.Matches—View matches in the dictionary for the word you want to use (only available with predictive text on and when the same set of key strokes canproduce multiple words).3. To send the message, select Send to > Send tonumber, Send to many, Send to distrib. list (if a distribution list has been created). Enter the recipient’s phone number or select Search to retrieve a number from your contacts list, and select Send. Read message When you receive a message, a notification message and are displayed. 1. Select Show to read the message or Exit to dismiss the notification and read the message later from your inbox. See "View saved messages," p. 34. 2. Scroll up or down to view the whole message, if necessary. Other options When reading a text message, select Options to access some or all of the following options:Delete—Select to discard the message.Use detail—Access the Number option to use or save the number. Select Options> Add to contact, Send message, or Call.Move—Save the message to Templates, Archive or a folder you have created.Forward—Divert the original message directly or edit this message then divert toanother phone number.Rename—Edit the title of the message.Lock or Unlock—Lock or unlock the message.Reply to message 1. In the standby mode, select Menu > Messages > Text messages > Inbox and your desired message, or when you receive a message, select Show. 33
N6066_UG_EN_FCC_060831.fm Page 34 Friday, September 1, 2006 11:26 AM Messages 2. Select Reply > Empty screen, Original text, Template or one of the predefined answers; then compose your reply using the keypad. 3. After creating the reply, select Send. The sender’s phone number is used as the default. Templates Templates are short, prewritten messages you can recall and insert into new text messages when you are short on time. 1. In the standby mode, select Menu > Messages > Text messages > Create message > Options > Use template. 2. Select your desired template. 3. Select Send to > Send to number, Send to many, or Send to distrib. list (with a distribution list created). 4. Enter the recipient’s phone number, or select Search to retrieve a number from your contacts list; and select Send. Text message foldersSave messagesYou can save any message except for a template to an existing folder or to a folder that you have created. 1. Open the received message or create a new message, and select Options. 2. To save a received message, select Move > Templates, Archive or a folder you have created. 3. To save the draft of a message you have created, select Save > Drafts or Templates. View saved messages 1. In the standby mode, select Menu > Messages > Text messages. 2. Select the folder containing the message you want to view:Inbox—Automatically stores any incoming messages.Outbox—Stores messages that have not been sentSent items—Stores messages that have been sent.34
N6066_UG_EN_FCC_060831.fm Page 35 Friday, September 1, 2006 11:26 AM Messages Drafts—Stores messages created as drafts.Archive—Stores messages that you choose to archive, including unread ones.Templates—Stores picture and prewritten templates. Preloaded templates can be edited and customised.My folders—Allows you to organise your messages by creating custom folders and saving some of your messages here. Select Options > Add folder, Renamefolder, or Delete folder to add a custom folder or rename or delete a folder you have created.You can only delete folders created in my folders; the inbox, sent items,archive, and templates folders are protected. When deleting a folder, you are also deleting all messages in the folder.3. When the folder opens, select the message you want to view. Distribution list The distribution list enables you to send messages to a group of contacts. In the standby mode, select Menu > Messages > Text messages > Distribution lists. To create a distribution list, select New list with no list created or Options > Create new list to create additional lists. To populate your list, select Add new and a contact from your contacts list. To use, rename, or modify a distribution list, highlight the distribution list; and select Options > Create new list, Send message, Rename list, Clear list, or Delete list. Delete messages If your message memory is full and you have more messages waiting at the network, No space for new text messages appears in the standby mode. You can do the following: • Read some of the unread messages, and delete them individually. • Delete messages from some of your folders. Delete a single message 1. In the standby mode, select Menu > Messages > Text messages. 2. Select the folder containing the message you want to delete. 3. Highlight the message you want to delete. 35
N6066_UG_EN_FCC_060831.fm Page 36 Friday, September 1, 2006 11:26 AM Messages 4. Select Options > Delete. 5. Select Yes to delete the message or No to exit. Delete all messages in a folder 1. In the standby mode, select Menu > Messages > Text messages > Delete messages. 2. Select the messages you want to delete: All—Deletes all messages in all of the folders. All read—Deletes any messages that have been read in all of the folders. All unread—Deletes any messages that have not been read in all of the folders. 3. Select and Mark the folders that have messages you want to delete: Inbox—Deletes all messages from the inbox folder. Outbox—Deletes all messages from the outbox folder. Sent items—Deletes all messages from the Sent items folder. Drafts—Deletes all messages from the drafts folder. Archive—Deletes all messages from the archive folder. [My folder]—Deletes all messages from [My folder] folder. 4. Select Done > Yes to empty the marked folder. Change sending options To change sending options for all future text messages, in the standby mode, select Menu > Messages > Text messages > Message settings > Sending optionsand the setting you want to change:Priority—Set the priority of the message as Normal or Urgent.Delivery reports—Send a note to yourself confirming delivery of the message. Select On or Off.Signature—Create a signature to send with text messages.To change sending options for one message, in the standby mode, select Menu > Messages > Text messages > Create message > Options > Sending options, andMark or Unmark the setting you want to change:Urgent—Set the priority of the message as urgent.36
N6066_UG_EN_FCC_060831.fm Page 37 Friday, September 1, 2006 11:26 AM Messages Delivery reports—Send a note to yourself confirming delivery of the message. Signature—Create a signature to send with text messages. Change message settings In the standby mode, select Menu > Messages > Text messages > Message settings > Other settings and the setting you want to change:Save incoming text messages—Select Save to UIM then phone if mem. full, Phoneonly, or UIM card only.Message font size—Select Small font or Large font.Message overwriting—Select Sent items only, Inbox only, S. items & Inbox, or Off. Note: When the message memory is full, your phone cannot send or receive any new messages. To free up the memory, you can select Message overwriting to make your phone automatically replace old messages in the inbox and sent items folders when new ones arrive. Save sent messages—Select Always save, Always prompt, or Off. Queue msgs. when digital unavailable—Select On, On prompt, or Off. Messages are stored in the outbox until they can be sent with digital service. ■Picture messages Your phone comes with five preloaded pictures. If necessary, you can overwrite any of the preloaded pictures. You can send a text message with pictures attached to compatible phones. However, pictures take up more space than text. To select your desired picture in the templates folder, in the standby mode, select Menu > Messages > Text messages > Templates. Receive and save Note: Only compatible devices that offer picture message features can receive and display picture messages. When you receive a picture message or text message, your device beeps and displays a message notification with the messaging icon in the upper left corner in the standby mode as a reminder. When you have unopened messages in your inbox, is displayed. Select Show to view the picture message or Exit to view the picture message in your inbox later. If you have more than one picture message, scroll to and select the message you want to view. Scroll to view the whole picture if necessary. 37
N6066_UG_EN_FCC_060831.fm Page 38 Friday, September 1, 2006 11:26 AM Messages To save a received picture in your templates folder, select Options > Save picture. Enter a title, and select OK. If your templates folder is full of pictures, scroll to and select a picture you want to replace. Compose and send When you insert a standard picture into a message, the number of characters you can add changes as shown in the upper right corner of the display screen. 1. In the standby mode, select Menu > Messages > Text messages > Create message. 2. Write the message, and select Options > Insert picture. 3. Scroll to a picture, and select Use or View > Insert. To replace with another picture, select Options > Change picture, scroll to another picture, and select Use or View > Insert. 4. Select Send to > Send to number, Send to many, or Send to distrib. list if distribution list exists. 5. Enter the phone number of the recipient, or select Search to retrieve a number from contacts list. To view, change, or delete the picture, select Options > Preview, Change picture, or Delete picture. ■M-IMAP Your phone supports mobile internet message access protocol (M-IMAP). You can send and receive e-mail, multimedia messages, and manage mail offline and online. Check with your wireless network operator for information on subscribing to this service. See "U-Mail," p. 28 for more information. ■Voice messages If you subscribe to voice mail, your wireless service provider will furnish you with a voice mailbox number. You need to save this number to your device to use voice mail. When you receive a voice message, your device beeps, displays a message, or both. If you receive more than one voice message, your device shows the number of voice messages received. 38
N6066_UG_EN_FCC_060831.fm Page 39 Friday, September 1, 2006 11:26 AM Messages Save voice mailbox number Your wireless service provider may have already saved your voice mailbox number to your device. Select OK to leave the number unchanged. 1. In the standby mode, select Menu > Messages > Voice messages > Voice mailbox number. The voice mailbox number is displayed. 2. If the box is empty, enter the voice mailbox area code and number, and select OK. Call and setup voice mail 1. After you save the voice mailbox number, in the standby mode, press and hold 1. 2. When you connect to voice mail and the prerecorded greeting begins, follow the automated instructions to setup voice mail. Listen to voice messages After you set up voice mail, in the standby mode, press and hold 1; or select Menu > Messages > Voice messages > Listen to voice messages to dial the voice mailbox number. When you connect and the prerecorded greeting begins, follow the automated instructions to listen to your voice messages. Automate voice mail You can insert special characters called dialling codes into phone numbers such as voice mail, and save the number to a speed dialling location. Dialling codes instruct the receiving system to pause, wait, bypass, or accept the numbers that follow them in the dialling string. See "Phone numbers with dialling codes," p. 39. Voice mail services vary by wireless service provider. The following instructions are examples of common operations. Please check with your wireless service provider for specific instructions on using your voice mail service. Phone numbers with dialling codes Dialling codes instruct the receiving system to pause, wait, bypass, or accept the numbers that follow them in the dialling string. To set up dialling codes, do the following: 1. In the standby mode, select Menu > Contacts > Speed dials. 2. Scroll to an (empty) speed dialling slot, and select Assign. 39
N6066_UG_EN_FCC_060831.fm Page 40 Friday, September 1, 2006 11:26 AM Messages 3. Enter your mailbox phone number, including the area code. 4. Enter any dialling codes as necessary after the entered phone number. For example, if you pause for 5 seconds after connecting to voice mail, enter p twice (two times 2.5 seconds) after the voice mailbox number: 2145551212pp. 5. Enter any remaining pauses or other information that enables you to listen to your messages, and select OK. 6. Enter a name (such as voice mail), and select OK. To dial and listen to your voice mail, press and hold the assigned speed dialling key in the standby mode. Insert dialling codesPress * repeatedly to cycle through dialling codes. When the desired code appears in the display, pause briefly and the code is inserted into the dialling string.The following dialling codes are available: *—Bypasses a set of instructions.p—Pauses for 2.5 seconds before sending any numbers that follow.+—Replaced by the international access code.w—Waits for you to press the call key before sending the numbers or codes thatfollow.Clear voice mail icon To clear the voice mail icon from the display, in the standby mode, select Menu > Messages > Voice messages > Clear voice message icon. ■Web messaging Web messaging is a network service. See "Network services," p. 73.If your wireless service provider supports this feature, you can use theminibrowser to check for e-mail messages. In the standby mode, select Menu > Messages > Minibrowser messages > Connect.See "Favourites," p. 27 for more information on using the minibrowser in your device to access web pages.40
N6066_UG_EN_FCC_060831.fm Page 41 Friday, September 1, 2006 11:26 AM Log 6. Log Call register stores information about your last 30 missed, received, and dialled calls respectively and adds the total duration of all calls. When the number of calls exceeds the maximum, the most recent call replaces the oldest.When viewing missed, received, or dialled calls, select Options to access these menu options:Time of call—Displays the date and time of the call.Send message—Sends a message to the number.Use number—Edits the number and associates a name with the number.Save—Enters a name for the number and saves it to your contacts list.Add to contact—Adds a number to a contact and saves it to your contacts list (available only with the number not yet stored in your contacts list).Delete—Clears the number from memory.Call—Calls the number.■View missed calls The missed calls feature does not function with your device switched off. Missed calls are calls you have never answered. To view missed calls, do the following: 1. In the standby mode, select Menu > Log > Missed calls, or with missed call notification displayed, select List. 2. Scroll to a name or number, and select Options and an option to view or activate. ■View received calls Received calls are calls that have been answered. 1. In the standby mode, select Menu > Log > Received calls. 2. Scroll to a name or number, and select Options and an option to view or activate. ■View dialled numbers Dialled calls are previous numbers you have dialled from your device: 41
N6066_UG_EN_FCC_060831.fm Page 42 Friday, September 1, 2006 11:26 AM Log 1. In the standby mode, press the call key, or select Menu > Log > Dialled numbers. 2. Scroll to a name or number, and select Options. 3. Select an option to view or activate. View call times You can make or receive calls to or from the same number and view up to five calls displayed with the time each call occurred. Your device clock must be set for this feature to work accurately. 1. In the standby mode, select Menu > Log > Missed calls, Received calls, or Dialled numbers. 2. Highlight your desired name or number, and select Options > Time of call. ■Message recipients You can view the most recently used message recipients.In the standby mode, select Menu > Log > Message recipients.■Clear log lists You can delete any missed, dialled, or received calls from your device memory. 1. In the standby mode, select Menu > Log > Clear log lists. 2. Select the call type you want to clear: All, Missed, Received, Dialled, Message recipients. ■Call duration Contact your wireless service provider for the actual calls and services invoice, which may vary depending on network features, rounding off for billing, taxes, and so forth. You can view the duration of your last call, all your dialled calls, all your received calls, all your calls, and your life timer, as well as clear your timers. Select Menu > Log > Call duration > Last call duration, Dialled calls' duration, Received calls' duration, All calls' duration, Life timer, or Clear timers. After you select Clear timers, enter your security code, and select OK. See "Security settings," p. 70. 42
N6066_UG_EN_FCC_060831.fm Page 43 Friday, September 1, 2006 11:26 AM Log Note: All call timers, except the life timer, are reset to zero with Clear timers selected.Note: Some timers, including the life timer, may be reset during service or software upgrades.To activate or deactivate the call timer in the standby mode while in a call, selectMenu > Log > Call duration > Last call duration > Show call time on display > Onor Off.To view your last call duration, select Menu > Log > Call duration > Last call duration.■Minibrowser duration Minibrowser is a network service. See "Network services," p. 73. If your wireless service provider supports this feature, you can view the size or duration of sent or received data from the minibrowser. Note: The actual time invoiced for calls and services by your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth. In the standby mode, select Menu > Log > Minibrowser calls and one of the following options:Last sent browser data—View the size (KB) of the last sent browser data.Last received browser data—View the size (KB) of the last received data.All sent browser data—View the size (KB) of all sent browser data.All received browser data—View the size (KB) of all received browser data.Last browser session—View the duration time of the last browser session.All browser sessions—View the duration time of all browser sessions.Clear all browser registers—Select OK > Yes to clear all browser logs.43
N6066_UG_EN_FCC_060831.fm Page 44 Friday, September 1, 2006 11:26 AM Contacts 7. Contacts The contacts list can hold up to 500 contacts with multiple numbers and text notes for each contact. The amount of numbers and text entries you can save may vary, depending on the length and total number of entries in the contacts list. ■Add new contacts To access the contacts list in the standby mode, select Menu > Contacts > Names. Save contact name and number 1. In the standby mode, enter the phone number you want to save. 2. Select Options > Save. 3. Enter the name, and select OK. Save contact number only 1. In the standby mode, enter the phone number you want to save. 2. Select and hold Options. Save an entry 1. In the standby mode, select Menu > Contacts > Names > Options > Add new. 2. Enter the name, and select OK. 3. Enter the phone number, and select OK > Back. Save numbers and text items You can save different types of phone numbers and short text items per name to the contacts list. The first number you save for any entry is automatically set as the default, or primary number, which you can always change. 1. In the standby mode, scroll down to display your contacts list and highlight the entry to which you want to add a phone number or text item. 44
N6066_UG_EN_FCC_060831.fm Page 45 Friday, September 1, 2006 11:26 AM Contacts 2. Select Details > Options > Add detail > Number (General, Mobile, Home, Office, or Fax), E-mail, Web address, Postal address, Note, Image, or Tone. 3. Enter the number or text for the type you have selected, and select OK. 4. To change a number type (General, Mobile, Home, Office, or Fax), highlight the number, and select Options > Change type. Change default number You can also change which phone number is the default (primary) number for the contact entry. 1. In the standby mode, scroll down to select the contact entry you want to change, and select Details. 2. Scroll to the number you want to set as default, and select Options > Set as default. Caller groups You can add contacts list entries to any of five caller groups, and assign a unique ringing tone or graphic to that group. This enables you to identify callers from the group by their unique ringing tone or graphic. 1. To assign an entry in your contacts list to a caller group, select to your desired contact entry, and select Details > Options > Caller groups > No group, Family, VIP, Friends, Business, Other . 2. To manage your caller groups, in the standby mode, select Menu > Contacts > Caller groups > Family, VIP, Friends, Business, or Other to display the following caller group options: Group name—Rename the group to your preference.Group ringing tone—Set the ringing tone for the group.Group logo—Turn the graphic for the caller group On or Off, or View the graphic.Group members—Add or remove members from the caller group.45
N6066_UG_EN_FCC_060831.fm Page 46 Friday, September 1, 2006 11:26 AM Contacts Set up speed dialling You can associate any entry in the contacts list with a key from 2-9. To dial those entries, press and hold the assigned key. See "Speed dialling," p. 66 to activate or deactivate speed dialling. Assign a key to speed dialling 1. In the standby mode, select Menu > Contacts > Speed dials. 2. Scroll to an (empty) speed dialling slot, and select Assign. 3. Enter the number (including the area code) and a name for the number, and select OK; or select Search to retrieve a number from the contacts list. If speed dialling is off, the device displays a prompt and asks if you want to turn speed dialling on. 4. Select Yes to activate speed dialling. Change speed dialling numbers 1. In the standby mode, select Menu > Contacts > Speed dials. 2. Scroll to the speed dialling entry you want to change, and select Options > Change. 3. Enter the new number and a name for the entry, and select OK; or select Search to retrieve a number from the contacts list. Delete speed dialling numbers 1. In the standby mode, select Menu > Contacts > Speed dials. 2. Scroll to the speed dialling entry you want to delete, and select Options > Delete > Yes. ■Voice tags You can dial up to 25 stored numbers using voice dialling.Before using voice tags, note the following:• Voice tags are not language-dependent. They depend on the speaker’s voice. • You must say the name exactly as you said it when you recorded it. • Voice tags are sensitive to background noise. Record voice tags, and use them in a quiet environment. 46
N6066_UG_EN_FCC_060831.fm Page 47 Friday, September 1, 2006 11:26 AM Contacts • Very short names are not accepted. Use long names and avoid similar names for different numbers. Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely on voice dialling in all circumstances. Assign a voice tag to an entry Before you can use voice dialling, you must first assign a voice tag to the number. 1. In the standby mode, scroll to the entry in your contacts list to which you want to assign a voice tag. 2. Select Details > Options > Add voice tag > Start. 3. Speak clearly into the microphone. Do not select Quit unless you want to cancel the recording. The device automatically stops recording, and saves and replays the voice tag. appears next to commands that have voice tags assigned. Dial a number 1. In the standby mode, press and hold the right selection key with the fold open, or press and hold the voice key regardless of the fold being open or closed. 2. When you hear several beeps and Speak now appears, release the key. 3. Pronounce the voice tag clearly into the microphone. When the device finds the voice tag, Found: appears, and the device automatically dials the number. If the device does not locate a number or recognize the voice tag, No match found appears. Voice tags 1. After you have associated a voice tag to a contact, select Menu > Contacts > Voice tags and your desired voice tag entry. 2. Select Playback, Change, or Delete. 47
N6066_UG_EN_FCC_060831.fm Page 48 Friday, September 1, 2006 11:26 AM Contacts ■Edit contacts list entries 1. In the standby mode, scroll down to the entry you want to edit in your contacts list. 2. Select Details > Options. 3. Select one of the following options, which may vary depending on whether you are editing a contact listed by phone number or contact name: View—View the phone number of the contact. Add detail—Add more details to the contact: Name (only available with no name added), Number (General, Mobile, Home, Office, or Fax), E-mail, Web address, Postal address, Note, Image (only available with no image added), or Tone. Edit name, Edit number, Edit detail, or Change image—Edit an existing contact name, phone number, details, or image attached to the contact.Delete—Delete more details (Delete number or Delete detail) or the entire contact entry (Delete contact) of the contact.Send message—Create and send the contact a text message.Use number—Use or save the number (available when you select a contact listed with a contact name). Select Options to use the number.Set as default—Change the default number of the contact.Change type—Change the number type to General, Mobile, Home, Office, or Fax. Add voice tag or Voice tag—Add a voice tag to the contact with no voice tag assigned, or select Playback, Change, or Delete with a voice tag assigned. Copy number—Copy the number to the UIM (SIM card) from the phone memory or vice versa.Send bus. card—Send the contact as a business card to another device.Caller groups—Add the contact to an existing caller group.Speed dial—Add the contact to your speed dialling list.4. Edit the option to your preference, and select Select. 48
N6066_UG_EN_FCC_060831.fm Page 49 Friday, September 1, 2006 11:26 AM Contacts ■Delete contacts entries To delete all entries in your contacts list, in the standby mode, select Menu > Contacts > Delete all contacts. ■Access the contacts menu 1. In the standby mode, select Menu > Contacts and one of the following options: Names—View the entries in your contacts list, and select Details or Options > Search, Quick search, Add new, Delete contact, or Copy for your selected entry. Settings—Change the memory in use, contacts list view or check the memory status of your device. Caller groups—View and edit the properties of any of the caller groups, including Family, VIP, Friends, Business, and Other. Voice tags—Listen to, modify, or delete a voice tag to a contact in the contacts list. Speed dials—View or modify the list of speed dialling numbers. Delete all contacts—Delete all entries in your contacts list. 2. Select an option to activate the feature or access its submenu. Search for a name in contacts Start searching with search command 1. In the standby mode, select Menu > Contacts > Names > Options > Search. 2. Enter the first characters or letters of the name you are searching for, and then press View all. 3. Scroll to the desired contact, and press Details. Press the scroll key to view the details of the selected name. Start searching by pressing scroll down key in standby mode or using quick search command 1. In the standby mode, scroll down to highlight the first name (or number) in the contacts. 49
N6066_UG_EN_FCC_060831.fm Page 50 Friday, September 1, 2006 11:26 AM Contacts 2. Press the responding number key repeatedly to enter the first pinyin letter for the first Chinese character of the name you are searching for. For example, to enter letter "z", press 9 four times. A search field pops up and displays the entered letter in it. Enter more informations in the search field. The display will show all Chinese names which match the letters you entered and all English names which start with the letters you entered. Please note, the names’ order showing on the display may be inconsistent with the order in contacts.English input method is the default input method when searching. When there’s a search field on display, press # to switch to other input methods,such as "stroke" or "uppercase" input method. The device searches the matching Chinese names based on the strokes you entered, or the matchingEnglish names based on the letters you entered.3. Scroll to the desired name. Press Details and use scroll key to view the details of the selected name. Configure settings You can select which memory to use, how the contacts appear in your contacts list and view the amount of memory used or available in your device. In the standby mode, select Menu > Contacts > Settings > Memory in use to select the phone, UIM or both. select Menu > Contacts > Settings > Scrolling view to change the view of name list or Memory status to view the device memory used and remaining. ■Send and receive contacts You can send and receive an entry in your contacts list using text messaging or mail, if supported by your wireless service provider. Send a business card You can send a business card as a text message to a compatible phone or other handheld device. 1. Highlight your desired entry from your contacts list, and select Details > Options > Send bus. card > Text message > Default number or All details 50
N6066_UG_EN_FCC_060831.fm Page 51 Friday, September 1, 2006 11:26 AM Contacts options appear only if you have more than one number or detail saved to the contact entry. 2. Enter the number for your recipient, or select Search to retrieve a number from your contacts list. 3. Select OK and the business card is sent. 51
N6066_UG_EN_FCC_060831.fm Page 52 Friday, September 1, 2006 11:26 AM Gallery 8. Gallery You can save pictures, video clips, recordings, and ringing tones to folders in the Gallery and add new folders as well. You can download images and tones using M-IMAP, SMS, mobile Internet sites, or Nokia PC Suite. Your device supports a digital rights management system to protect content you have acquired. Content such as a ringing tone, can be protected and associated with certain usage rules, for example, the number of usage times or a certain usage period. Usage rules are defined in the content activation key that can be delivered with the content or delivered separately, depending on your wireless service provider. You may be able to update the activation key. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee. Copyright protection may prevent some images, ringing tones, and other content from being copied, modified, transferred, or diverted. Your device has about 14 MB of memory for storing files in the Gallery. This memory is not shared with other functions, such as contacts. If the device displays a message that the memory is full, delete some existing files before proceeding. ■Folders 1. In the standby mode, select Menu > Gallery > Images, Video clips, Themes, Graphics, Tones, Recordings, or a user-created folder. 2. Select Open to view a list of the folder, and press Options to access the following options:Delete folder—Delete a folder you have created. You cannot delete a presetfolder.Move—Move the selected folder into another folder. After selecting Move, scroll to another folder, and select Move to. You cannot move a preset folder.Rename folder—Rename a folder you have created. You cannot rename a preset folder.Details—Show the name, size, and date of creation of the selected folder. Type of view—Select List with details, List, or Grid to determine how to display the folders. 52
N6066_UG_EN_FCC_060831.fm Page 53 Friday, September 1, 2006 11:26 AM Gallery Sort—Sort the contents of the selected folder by name, date, format, or size.Add folder—Create a new folder.Memory status—Check the available memory for the device handset.Activation key list—View the list of available activation keys. You can deleteactivation keys if desired.3. Enter one folder and select one file, then you can use the following options by pressing Options: Delete—Delete a file you have created. You cannot delete a preset file. Send—You can send file via mail.Move—Move the selected file into another folder. After selecting Move, scroll to another folder, and select Move to. You cannot move a preset file.Rename—Rename a file you have created. You cannot rename a preset file.Edit image—You can insert text, frame, clip-art, images in image and crop image.Use image—You can use the current image to access the following options:•Set as wallpaper—Set the current image as wallpaper of main display and mini display. •Set as scr.saver—Set the current image as screen saver of main display and mini display. • Set as cont. image—Set the current image as contacts image.Details—Show the name, size, and date of creation of the selected file.Type of view—Select List with details, List, or Grid to determine how to display the files within them.Sort—Sort the contents of the selected file by name, date, format, or size.Delete all—Delete all items in the selected folder.Open in sequence—Open images in folder in current sequence as slide.Add folder—Create a new folder.Memory status—Check the available memory for the device handset.Activation key list—View the list of available activation keys. You can deleteactivation keys if desired. 53
N6066_UG_EN_FCC_060831.fm Page 54 Friday, September 1, 2006 11:26 AM Gallery ■Fun frames and clip art In the gallery, you can select photos and clip art and save them as screensavers and wallpapers. Personalize photos, clip-art, screensavers, and wallpapers by adding your own text, adding a frame, changing the size of an image.In the standby mode, select Menu > Gallery > Images > Options > Edit image > Options > Insert text, Insert frame, Insert clip-art, Insert image, Crop image.You can also personalize clip-art, existing wallpapers and screensavers with text,images, and frames.When adding text, you can select the font style, size, and colour. Plus, the font can be rotated.54
N6066_UG_EN_FCC_060831.fm Page 55 Friday, September 1, 2006 11:26 AM Media 9. Media ■Camera You can take photos and record video clips with the built-in 0.3 megapixel camera. The camera lens is on the front of the device. The camera producesphotos in JPEG format and video clips in MJPEG format. When using the features in this device, please follow local laws and respect privacy rights and additional rights of other people.After you take a picture or video, you can attach it to a multimedia message, send it with M-IMAP, save it as a wallpaper, save it on a compatible PC using Nokia PC Suite software, and upload it to a Web address with the content image uploader.When you attach a picture to an entry in your list of contacts, the picture isdisplayed when the contact calls you.The Nokia 6066 device supports an image capture resolution of 0.3 megapixal (640 x 480 pixels). The image resolution in these materials may appear different.If there is not enough memory to take a new photo, delete old photos or other files in the Gallery.Take a photo You can take a photo with the fold open, or self portraits with the fold closed. 1. In the standby mode, press the camera key to activate the camera, or with the fold open, select Menu > Media > Camera. 2. Select Capture to take the photo. When taking a photo, a shutter sound is heard, the photo displays on the screen, and either a blinking icon or scrolling indicator displays as the photo is saved to the Images folder of Gallery. When you are taking a picture, move the four-way scroll key to the right or left to change between the different modes, or select Options > Change mode and the mode you want. you can choose: •Standard photo when you want to take normal landscape pictures. •Portrait photo when you want to take a smaller icon-sized, vertical picture, which can be added to a contact card. •Night mode when the lighting is dim and the Camera needs a longer exposure time for the picture to be of good quality. 55
N6066_UG_EN_FCC_060831.fm Page 56 Friday, September 1, 2006 11:26 AM Media •Video when you want to record video clips. 3. When you are in viewfinder window, you can use the following options: Change mode—Switch the camera mode to Standard photo, Portrait photo, Night mode or Video.Zoom—Zoom in closer, with up to 4x zoom, before capturing a photo or get a closer look at the captured photo; use the scroll key to navigate around the photo.Flash on or Flash off—Turn the flash on or off.Self-timer on—Use the self-timer to delay capturing a photo for 10 seconds,or set to Self-timer off.Img. sequence on—Take a series of five pictures in sequence, or set to Img. sequence off.Open Gallery —Open gallery to view saved images, videos, and recordings. Settings—Select options in Default mode, Image size, Image quality, Video clip length, Default title, Camera effects (Normal, Negative, Binary, Contrast, Black & white ). View previous—View the previous photo. 4. After you have taken a photo, you can access the following options: Zoom—Zoom in closer, with up to 4x zoom, before capturing a photo or get a closer look at the captured photo; use the scroll key to navigate around the photo.Send—Send the photo to another device via mail.Attach to contact—Attach an image to a contact in Names.Rename—Enter or edit the name of the captured photo, and select OK.Open Gallery —Open gallery to view saved images, videos, and recordings.Set as wallpaper—Use a captured photo for wallpaper.Set as s. saver—Use a captured photo as a screen saver.Details—View the Name, Size, Created, Format, Resolution, or Copyright of a captured photo. 56
N6066_UG_EN_FCC_060831.fm Page 57 Friday, September 1, 2006 11:26 AM Media Record a video clip You can record a video clip up to 15 frames per second (FPS).Supported video clip formats include MJPEG format with 128 x 96 image size .1. In the standby mode, select Menu > Media > Camera > Options > Change mode > Video > Record. While you are recording, the recording indicator and the remaining recording time are displayed. 2. Select Pause to pause the recording, Continue to resume the recording, or Stop to stop the recording. The device saves the recording in the Video clips folder in gallery. 3. Select Back to record another video or select Options and one of the following: Delete—Delete the video clip. Send—Send the video clip to another device as a mail. Rename—Rename the video clip. Open Gallery—Go to the video clip folder of the gallery menu. Set as s.saver—Use a captured video clip as screen saver.Details—View details of the selected video, such as name, size, time and datecreated, resolution, file format, and copyright information.Self-timer In the standby mode, select Menu > Media > Camera > Options > Self-timer on to set a timer and delay capturing a photo for 10 seconds. Select Start a beep sounds while the self-timer runs and beeps faster when the camera is about to capture the photo.After the time out, the camera takes the photo and saves the photo in the images folder of the gallery menu. Settings In the standby mode, select Menu > Media > Camera > Options > Settings to change the settings in the camera mode. Select one of the following options: Default mode—Select Standard photo, Portrait photo, Night mode or Video for the default camera mode. Image size—Select the size for the image. 57
N6066_UG_EN_FCC_060831.fm Page 58 Friday, September 1, 2006 11:26 AM Media Image quality—Define file compression when saving the image. Select High, Normal, or Basic. High uses the least file compression and provides the best image quality but takes more memory. Video clip length—Select Default or Maximum (up to 1 minutes). Video clips longer than the default length may exceed memory constraints for mail. Default title—Select Automatic to use a predefined title or My title to key in or edit a new title. Camera effects—Select the appropriate background for the image. ■Media player With the media player you can view and play compatible images, audio and video files, and animated images from a variety of sources. In the standby mode, select Menu > Media > Media player and the following: Open Gallery—Open the Gallery. From Gallery, you can play stored audio and video files. See "Gallery," p. 52. ■Voice recorder This feature enables you to record pieces of speech or sound with your device and listen to them later. The total available time is 1 minutes with no memos stored. The maximum length of a recording depends on how much memory remains available. In the standby mode, select Menu > Media > Voice Recorder > Record to start the recording or Recordings list to manage the folder you have defined for recording storage, or Save to select a folder to save recordings. Record speech or sound 1. In the standby mode, select Menu > Media > Voice Recorder > Record. 2. After you hear the recorder start tone, begin recording speech or sound. 3. When you finish recording, select Stop and your recording is saved to the Recordings folder in the Gallery. 58
N6066_UG_EN_FCC_060831.fm Page 59 Friday, September 1, 2006 11:26 AM Media Other options After you have saved the recording to the Recordings folder, highlight the recording, and select Open to listen to the recording using the earpiece; or selectOptions and one of the following.Delete—Erase the recording.Send—Send the recording.Move—Move the recording to another folder.Rename—Change the name of the recording.Use tone—Use your recording as a ringtone (a network-dependent feature).Details—Show the name, size, format, length and date of creation of the recording.Type of view—Select List with details, List, or Grid to determine how to display the recordingSort—Sort the contents of the recording by name, date, format, or size.Delete all—Delete all items in a folder.Open in sequence—Open items in a folder in sequence.Add folder—Create a new folder.Memory status—Check the available memory for the device handset or how muchmemory has been used.Activation key list—View the list of available activation keys. You can deleteactivation keys if desired.59
N6066_UG_EN_FCC_060831.fm Page 60 Friday, September 1, 2006 11:26 AM Settings 10. Settings Use this menu to change profiles, themes, main display settings, mini display settings, tone settings, time and date settings, call settings, phone settings, voice commands, enhancement settings, security settings, network settings, network services, restore factory settings and phone details. ■Profiles Profiles define how your device reacts when you receive a call or message and how your keypad sounds when you press a key. You can leave ringing options, keypad tones, and other settings for each of the available profiles at their defaultsetting, or customise them to suit your needs.Profiles are also available for enhancements such as the headset and car kit. See"Enhancement settings," p. 72.To activate a profile, in the standby mode, select Menu > Settings > Profiles > General, Silent, Meeting, Outdoor, or Pager > Activate.Personalise a profile You can personalise any of the profiles in various ways. 1. In the standby mode, select Menu > Settings > Profiles. 2. Select the profile you want to personalise. 3. Select Personalise and the option you want to personalise. Set a timed profile You can use timed profiles to prevent missed calls. For example, suppose you attend an event requiring your device set to Silent before the event starts, but you forget to return it to General until long after the event. A timed profile can prevent missed calls by returning your device to the default profile at a time you specify. You can set timed profiles up to 24 hours in advance. 1. In the standby mode, select Menu > Settings > Profiles. 2. Select the profile you want to activate and Timed for timed expiration. 3. Enter the time in hh:mm format for the profile to expire, and select OK. 60
N6066_UG_EN_FCC_060831.fm Page 61 Friday, September 1, 2006 11:26 AM Settings ■Themes A theme contains many elements for personalizing your phone, such as wallpaper, screen saver, colour scheme, and a ringing tone. Themes automatically loads wallpapers, screen savers, ringtones and background colours. Selecting a theme over-writes previous settings. Individual settings for a theme can be overwritten independently in the settings menu. For example, a theme selects a wallpaper, a screensaver, and a default ringing tone. The default ringing tone within a theme can be overwritten. See "Tone settings," p. 61. To choose a theme for your display, in the standby mode, select Menu > Settings > Themes > Select theme > Themes. Scroll to the theme you want and select Options > Apply theme, Details, Type of view or Sort. ■Tone settings You can adjust the ringing volume, keypad tones, and more for the active profile. See "Personalise a profile," p. 60 for more information on profile settings. Select Menu > Settings > Tones and one of the following: Incoming call alert—Select how the device notifies you of an incoming call.Ringing tone—Select the ringing tone for incoming calls.Ringing volume—Set the volume of your ringing tone.Vibrating alert—Turn the vibrating alert On or Off.Message alert tone—Select the tone for receiving messages.Keypad tones—Set the volume of your keypad tones (or turn them off).Warning tones—Turn warning and confirmation tones On or Off.Alert for—Define which caller groups the selected profile will accept or decline.See "Caller groups," p. 45.■Main display settings Standby mode settings Wallpaper You can set your device to display a background picture (wallpaper). 61
N6066_UG_EN_FCC_060831.fm Page 62 Friday, September 1, 2006 11:26 AM Settings 1. In the standby mode, select Menu > Settings > Main display > Standby mode settings > Wallpaper > Select wallpaper > Images, Video clips, Graphics, Tones, Recordings, Themes, or a user-created folder > Open. 2. Browse your selected folder containing the graphics or image of your desired wallpaper. 3. When you arrive at the image of your choice, select Options > Set as wallpaper. 4. To activate or deactivate wallpaper, in the standby mode, select Menu > Settings > Main display > Standby mode settings > Wallpaper > On or Off. 5. You can also capture a picture as wallpaper. In the standby mode, select Menu > Settings > Main display > Standby mode settings > Wallpaper > Start camera > Capture > OK. Standby font colour You can change the font colour used in the standby mode.In the standby mode, select Menu > Settings > Main display > Standby mode settings > Standby font colour, then choose your favourite colour.Screen saver In the standby mode, select Menu > Settings > Main display > Screen saver > On, Off, Screen savers (Image, Video clip, Start camera), Time-out. Power saver You can turn the power saver on and off. In the standby mode, select Menu > Settings > Main display > Power saver > On or Off. Sleep mode You can turn the sleep mode on or off. In the standby mode, select Menu > Settings > Main display > Sleep mode > On or Off. Colour schemes You can change the colour of some display components in your device, such as indicators and signal bars. 62
N6066_UG_EN_FCC_060831.fm Page 63 Friday, September 1, 2006 11:26 AM Settings In the standby mode, select Menu > Settings > Main display > Colour schemes and the colour scheme of your choice. Backlight time-out You can choose how long to set the backlights on. In the standby mode, select Menu > Settings > Main display >Backlight time-out >15 seconds or Personalise. ■Mini display settings Standby mode settingsWallpaperYou can set your device to display a background picture (wallpaper). 1. In the standby mode, select Menu > Settings > Mini display > Standby mode settings > Wallpaper > Select wallpaper > Images, Video clips, Themes, Graphics, Tones, Recordings or a user-created folder > Open. 2. Browse your selected folder containing the graphics or image of your desired wallpaper. 3. When you arrive at the image of your choice, select Options > Set as wallpaper. 4. To activate or deactivate wallpaper, in the standby mode, select Menu > Settings > Mini display > Standby mode settings > Wallpaper > On or Off. 5. You can also capture a picture as wallpaper. In the standby mode, select Menu > Settings > Mini display > Standby mode settings > Wallpaper > Start camera > Capture > OK. Standby font colour You can change the font colour used in the standby mode.In the standby mode, select Menu > Settings > Mini display > Standby modesettings > Standby font colour, then choose your favourite colour.Screen saver In the standby mode, select Menu > Settings > Mini display > Screen saver > On, Off, Screen savers (Image, Start camera), Time-out. 63
N6066_UG_EN_FCC_060831.fm Page 64 Friday, September 1, 2006 11:26 AM Settings Power saver You can turn the power saver on and off. In the standby mode, select Menu > Settings > Mini display > Power saver > On or Off. Sleep mode You can turn the sleep mode on or off. In the standby mode, select Menu > Settings > Mini display > Sleep mode > On or Off. Colour schemes You can change the colour of some display components in your device, such as indicators and signal bars.In the standby mode, select Menu > Settings > Mini display > Colour schemesand the colour scheme of your choice.■Time and date settings Clock In the standby mode, select Menu > Settings > Time and date > Clock > Show clock or Hide clock, Set the time, Time zone or Time format. Date In the standby mode, select Menu > Settings > Time and date > Date > Show date or Hide date, Set the date, Date format or Date separator. Date and time auto-update Auto-update is a network service. See "Network services," p. 73. If your wireless service provider supports this feature, you can allow the digital network to set the clock, which is useful when you are out of your home area, for instance when you have traveled to another network or time zone. In the standby mode, select Menu > Settings > Time and date > Auto-update of date & time > On, Confirm first, or Off.If you use the Auto-update of date & time option while outside your digital network, you may be prompted to enter the time manually. Network time willreplace the time and date when you reenter your digital network.64
N6066_UG_EN_FCC_060831.fm Page 65 Friday, September 1, 2006 11:26 AM Settings If your battery has been removed or has discharged outside the digital network, you may be prompted to enter the time manually (when the battery is replaced or recharged, and you are still outside of the digital network). ■Voice commands Before using voice tags, note the following: • Voice tags are not language-dependent, but depend on the speaker’s voice. • You must say the name exactly as you said it when you recorded it. • Voice tags are sensitive to background noise. Record voice tags, and use them in a quiet environment. • Very short names are not accepted. Use long names, and avoid similar names for different numbers. Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely on voice dialling in all circumstances. Hands-free operation You can set as many as 9 voice commands to enable hands-free operation of certain features in your device. Assign a voice tag to a command Before using voice commands, you must first add a voice tag to the device function. 1. In the standby mode, select Menu > Settings > Voice commands. 2. Select the device function you want to tag: Profiles, Voice mailbox, Voice recorder, Log. 3. If necessary, select an option associated with that function. 4. Select Start, and speak the voice tag clearly into the microphone. Do not select Quit unless you want to cancel the recording.The device replays and saves the recorded tag. appears next to commands with voice tags assigned. Activate a voice command After you have associated a voice tag with a function in your device, to issue a command, speak the voice tag. 65
N6066_UG_EN_FCC_060831.fm Page 66 Friday, September 1, 2006 11:26 AM Settings 1. In the standby mode, press and hold the right selection key or voice key. 2. With Speak now displayed, pronounce the voice tag clearly into the microphone. With the voice tag found, the device displays Found:, and plays the recognized voice tag through the earpiece. The function you requested is activated. Options After you have associated a voice tag to a command, you can select one of the following options:Playback—Listen to the voice command tag.Change—Change the voice command.Delete—Erase the voice command tag.■Call settings Anykey answer Anykey answer enables you to answer an incoming call. Briefly press any key except the right selection key or end key.In the standby mode, select Menu > Settings > Call > Anykey answer > On or Off.Automatic redial Occasionally, your network may experience heavy traffic, resulting in a fast busy signal when you dial. With automatic redial activated, your device redials the number (number of times is specified by the network), and notifies you when the network is available. In the standby mode, select Menu > Settings > Call > Automatic redial > On or Off. Speed dialling You can activate or deactivate speed dialling. In the standby mode, selectMenu > Settings > Call > Speed dialling > On or Off. See "Set up speed dialling,"p. 46. 66
N6066_UG_EN_FCC_060831.fm Page 67 Friday, September 1, 2006 11:26 AM Settings Open fold to answer By default, your phone answers an incoming call when you open the fold. You can change the default setting to have your phone not answer calls with the fold open. In the standby mode, select Menu > Settings > Call > Answer when fold is opened > On or Off. Calling card If you use a calling card for long distance calls, you can save the calling card numbers in your device. Your device can store up to four calling cards. Contact your calling card company for more information. Save information 1. In the standby mode, select Menu > Settings > Call > Calling card. 2. Enter your security code, and select OK. See "Security settings," p. 70. 3. Scroll to one of the four card memory locations, and select Options > Edit > Dialling sequence and one of the following sequence types:Access no.+ phone no.+ card no.—Dial the access number, the phone number, then the card number (and the PIN, if required).Access no.+ card no.+ phone no.—Dial the access number, the card number (and the PIN, if required), then the phone number.Prefix+ phone no.+ card no.—Dial the prefix (numbers that must precede the phone number) and phone number you want to dial, then the card number (and the PIN, if required).4. Enter the required information (access number or prefix and card number), and select OK to confirm your entries. 5. Select Card name, enter the card name, and select OK. Make calls After you have saved your calling card information in your device, you can make a call using your calling card. 1. In the standby mode, select Menu > Settings > Call > Calling card. 2. Enter your security code, and select OK. See "Security settings," p. 70. 3. Select your desired calling card. 67
N6066_UG_EN_FCC_060831.fm Page 68 Friday, September 1, 2006 11:26 AM Settings 4. Press the end key to return to the standby mode; then enter the phone number, including any prefix (such as 0 or 1) that your calling card may require when you make a calling card call. See your calling card for instructions 5. Press and hold the call key for a few seconds until Card call is displayed. 6. When you hear the tone or system message, select OK. International prefix You can store an international dialling prefix into your device. In the standby mode, select Menu > Settings > Call > International prefix. In the standby mode, when you enter + (press * twice) at the beginning of a phone number, your device automatically inserts the international dialling prefix that you have stored after you press the call key. See "Insert dialling codes," p. 40.Call summary Your device can display the time spent on a call when you hang up. In the standby mode, select Menu > Settings > Call > Call summary > On or Off. Ringing tone for no caller ID You can select a different ringing tone for calls received with no caller ID. In the standby mode, select Menu > Settings > Call > Ringing tone for no caller ID > On or Off.■Phone settings Phone language The phone language affects the time and date formats of the clock, alarm clock, and calendar. In the standby mode, select Menu > Settings > Phone > Phone language and the language of your choice. Memory status You can view the size of memory available on your device. In the standby mode, select Menu > Settings > Phone > Memory status. 68
N6066_UG_EN_FCC_060831.fm Page 69 Friday, September 1, 2006 11:26 AM Settings Automatic keyguard You can set the keypad of your device to lock automatically after a preset time delay. 1. In the standby mode, select Menu > Settings > Phone > Automatic keyguard > On or Off. 2. If you select On, Set delay: is displayed. 3. Enter the delay time (in mm:ss format), and select OK. When keyguard is on, it may be possible to dial the emergency number programmed into your device. DTMF tones DTMF tones, are the tones that sound when you press the keys on your device keypad. You can use DTMF tones for many automated dial-up services such as banking and airlines or for entering your voice mailbox number and password. DTMF tones are sent during an active call. You can send them manually from your device keypad, or send them automatically by saving them in your device. Set type In the standby mode, select Menu > Settings > Phone > DTMF tones > Manual DTMF tones and one of the following options: Continuous—Used to set the tone sound for as long as you press and hold a key. Fixed—Used to send tones of the duration you specify in the DTMF tone length option. Off—Used to turn off tones. No tones are sent when you press a key. Set length You can specify touch-tone length for the Fixed option. In the standby mode, select Menu > Settings > Phone > DTMF tones > DTMF tone length > Short (95 ms) or Long (350 ms). Start-up tone You can select to have a start-up tone when you first turn on your device. In the standby mode, select Menu > Settings > Phone > Start-up tone > On or Off. 69
N6066_UG_EN_FCC_060831.fm Page 70 Friday, September 1, 2006 11:26 AM Settings Welcome note You can write a welcome note which is displayed briefly each time you switch on the phone.To change the language for welcome note, in the standby mode, select Menu > Settings > Phone > Welcome note, press Option key, and then select Writing language. To insert smiley in the note, select Insert smiley after pressing Optionskey, scroll to the smiley you desired and press Use.Help text activation Your device displays brief descriptions for most menu items. When you arrive at a feature or menu, pause for about 14 seconds and wait for the help text to display. If necessary, scroll through the full help text. The default setting for help text is On. However, you can turn help text on or off. In the standby mode, select Menu > Settings > Phone > Help text activation > On or Off. Confirm UIM service actions This option enables you to request notification when your service provider makes changes to UIM-related services.For availability, rates, and information on using UIM services, contact your UIM card vendor, for example, your network operator.Select Menu > Settings > Phone > Confirm UIM service actions > Yes or No. ■Security settings PIN code The PIN code protects the UIM card from unauthorized access. The PIN code can be 4–8 digits in length. After three successive incorrect entries, the PIN code is blocked. You need to enter the personal unblocking key (PUK) code. See "Personal unblocking key (PUK) code," p. 72. Note: The PIN code must be obtained form your wireless service provider. The PIN code is typically provided with your UIM card. PIN code request To provide extra security in case your phone is lost or stolen, enable your phone to request the PIN code when powered on. 70
N6066_UG_EN_FCC_060831.fm Page 71 Friday, September 1, 2006 11:26 AM Settings 1. In the standby mode, select Menu > Settings > Security > PIN code request. 2. Enter the PIN code, and select OK. 3. Select On. Call restrictions Select call restrictions to block or allow numbers for incoming and outgoing calls. With any numbers entered as allowed numbers, all those entered as blocked numbers are ignored. With a number blocked, the phone blocks any call from it, and send the caller to the voice mail. 1. In the standby mode, select Menu > Settings > Security > Call restrictions. 2. Enter the security code, and select OK. See "Security settings," p. 70. 3. Select the types of calls you want to restrict:Restrict outgoing calls—Set restrictions on making calls.Restrict incoming calls—Set restrictions on receiving calls.4. Select whether to block or allow numbers: Blocked numbers—Set the numbers the phone can only block, allowing all the rest.Allowed numbers—Set the numbers the phone can only call or receive,blocking all the rest. 5. Select one of these options: Select, Add restriction (unavailable with memory full), Edit (unavailable with no number added), or Delete (unavailable with no number added). Note: With restricted calls, you may still call the official emergency number programmed into your device. Security level Your device can be set to different security levels to control device use and memory settings. In the standby mode, select Menu > Settings > Security > Security level. Enter your security code, and select OK and one of the following options: None—Disable security level protection.Memory—Enable or disable memory protection.71
N6066_UG_EN_FCC_060831.fm Page 72 Friday, September 1, 2006 11:26 AM Settings Phone—Enable or disable phone protection. Access codes You can change your device access codes. In the standby mode, select Menu > Settings > Security > Access codes. Then choose one of the following options:Change security code—Change the security code to a new one.Change PIN code—Change the PIN code to a new one.Voice privacy Voice privacy is a network service. See "Network services," p. 73. If your wireless service provider supports this feature, the voice privacy feature protects the privacy of your current phone conversation from other callers placing phone calls on your same network. In the standby mode, select Menu > Settings > Security > Voice privacy > On or Off. Personal unblocking key (PUK) code The PUK code is used to restore a blocked PIN code. The PUK code is 8 digits in length and cannot be changed. The PUK code must be obtained from your wireless service provider. Important: If you enter an incorrect PUK code 10 times in succession, the UIM card is rejected and can no longer be used. You must contact your wireless service provider for a new UIM card. ■Enhancement settings The enhancement settings menu is shown only if the device has been connected to a compatible enhancement. In the standby mode, select Menu > Settings > Enhance-ments > Headset, Handsfree or Charger. Headset Important: The headset may affect your ability to hear sounds around you. Do not use the headset in situations that may endanger your safety. Select the option of your choice to enter the submenu and modify its settings. Default profile—Choose the profile you want automatically activated with a headset connected. 72
N6066_UG_EN_FCC_060831.fm Page 73 Friday, September 1, 2006 11:26 AM Settings Automatic answer—Answer calls automatically after one ring with a headset connected. Select On or Off. Charger Select the option of your choice to enter the submenu and modify its settings. Default profile—Choose the profile you want automatically activated with your device connected to the charger. Lights—Choose to keep the device lights always on, or to shut off automatically after several seconds. Select On or Automatic. ■Network The menu options you see in your device depend on your service provider’s network. The network determines which options actually appear in the device menu. Check with your service provider for more information. The Network menu enables you to customise the way your device chooses a network in which to operate while you are within or outside of your primary or home system. Your device is set to search for the most cost-effective network. If your device cannot find a preferred network, it selects a network automatically based on the option you choose in the Network menu. You can set your device to roam or search for another network when you are not in your home area. 1. In the standby mode, select Menu > Settings > Network and one of the following options: Home only—You can make and receive calls in your home area only. Automatic—The phone automatically searches for service in another digital network. With no service found, the device uses analog service. The roaming rate applies when not in the home service area. 2. Select an option to confirm the activation. ■Network services The following features are network services. See "Network services," p. 73. 73
N6066_UG_EN_FCC_060831.fm Page 74 Friday, September 1, 2006 11:26 AM Settings Store a feature code 1. In the standby mode, select Menu > Settings > Network services > Network feature setting. 2. Enter the feature code from your service provider (for example, *730), and select OK. 3. Select the type of service that matches the feature code you entered (for example, Call divert > Cancel all diverts). The activated feature code is now stored in your device, and you are returned to the Feature code: field. Continue entering other feature codes (for example, *633), or press the end key to return to the standby mode. When you enter a network feature code successfully, the feature becomes visible in the Network services menu. Call diverting Call diverting tells your network to redirect incoming calls to another number. Call diverting is a network service and may not work the same in all networks, so contact your wireless service provider for availability. Activate The following options may not all appear in the display. Contact your wireless service provider for more information. 1. In the standby mode, select Menu > Settings > Network services > Call divert and one of the following options: Divert all calls—Divert all calls to the number you specify. Divert if busy—Divert incoming calls when you are in a call.Divert if not answered—Divert incoming calls to another number if you areunable to answer.Divert if out of reach—Divert incoming calls when your device is off. 2. Select Activate. 3. Enter the number to which to divert your calls, and select OK. 74
N6066_UG_EN_FCC_060831.fm Page 75 Friday, September 1, 2006 11:26 AM Settings Cancel In the standby mode, select Menu > Settings > Network services > Call divert > Cancel all diverts. Cancel all diverts may affect your ability to receive voice mail messages. Contact your wireless service provider for specific details. Call waiting If your wireless service provider supports this feature, call waiting notifies you of an incoming call even while you are in a call. You can then accept, reject, or ignore the incoming call. 1. In the standby mode, select Menu > Settings > Network services > Call waiting > Activate or Cancel. 2. During a call, select Answer, or press the call key or voice key to answer the waiting call. The first call is put on hold. 3. Press the end key to end the active call. ■Restore settings You can reset some of the menu settings to their original values. Data that you have entered or downloaded is not deleted (for example, entries in your contacts list are not affected). 1. In the standby mode, select Menu > Settings > Restore factory sett.. 2. Enter the security code, and select OK. See "Security settings," p. 70. ■Phone details You can view phone related details. In the standby mode, select Menu > Settings > Phone details, you can view the following details: User details, Version details, System details and Icon details. 1. To view the information related to the user of the phone, in the standby mode, select Menu > Settings > Phone details > User details > My number (MDN) or Mobile station ID number (MSID). 2. To view the version details of the phone, in the standby mode, select Menu > Settings > Phone details > Version details > Phone model, Software version, Browser version and Hardware version. 75
N6066_UG_EN_FCC_060831.fm Page 76 Friday, September 1, 2006 11:26 AM Settings 3. To view system details of the phone, in the standby mode, select Menu > Settings > Phone details > System details > System ID (SID), Channel, Preferred roaming list (PRL), Mode, Frequency. 4. To view icon details which used in the phone, in the standby mode, select Menu > Settings > Phone details > Icon details. A icons list appears and you can view all icons which may be used in the phone. 76
N6066_UG_EN_FCC_060831.fm Page 77 Friday, September 1, 2006 11:26 AM Organiser 11. Organiser Your device contains features to help organise your everyday life, including an alarm clock, calendar, notes, To-do list, calculator, timer, stopwatch and world clock. ■Alarm clock Set or change alarm setting The alarm clock depends on the device clock, which sounds an alert anytime you specified. 1. In the standby mode, select Menu > Organiser > Alarm clock > Alarm time > On. 2. Enter the time for the alarm in hh:mm format. 3. Select am or pm (with 12-hour format selected), and then select OK. Alarm on appears briefly in the display, and appears in the standby mode. Repeat alarm You can set the alarm to repeat. In the standby mode, select Menu > Organiser > Alarm clock > Repeat alarm > On/Off, Repetition days. Set the alarm tone You can set which tone to play when the alarm sounds. In the standby mode, select Menu > Organiser > Alarm clock > Alarm tone > Standard or Open Gallery to choose the tone you want to use. Snooze time-out To set the alarm snooze time, select Menu > Organiser > Alarm clock > Snooze time-out > 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes, or Other (to enter up to 60 minutes snooze time). 77
N6066_UG_EN_FCC_060831.fm Page 78 Friday, September 1, 2006 11:26 AM Organiser Alarm conditions When the alarm sounds, your device beeps, vibrates (if vibrating alert is on for currently active profile), and the display lights up.With the device on, select Stop to shut the alarm off or Snooze. With Snoozeselected, the alarm stops for 10 minutes, and Snooze on appears in the display.If you do not press a key, the alarms stops (snoozes) for 10 minutes, then soundsagain. You can also select Menu > Organiser > Alarm clock > Snooze time-out toreset the snooze time.Turn an alarm off In the standby mode, select Menu > Organiser > Alarm clock > Alarm time > Off. ■Calendar The calendar keeps track of reminders, memo, calls you need to make, meetings and birthdays, which can even sound an alarm for any of these events. Monthly view provides an overview of the selected month and weeks, enabling you to jump to a specific date. Any days or dates that appear in bold font contain calendar notes such as a meeting or reminder. Open In the standby mode, select Menu > Organiser > Calendar. Scroll to move the cursor in some calendar views. Go to a date 1. In the standby mode, select Menu > Organiser > Calendar > Options > Go to date. 2. Enter the date (mm/dd/yyyy), and select OK. Note a specific date You can apply five types of notes to your calendar. Your device asks for further information depending on which note you choose. You also have the option to set an alarm for any note you select. 1. Go to the date for which you want to set a reminder. See "Go to a date," p. 78. 78
N6066_UG_EN_FCC_060831.fm Page 79 Friday, September 1, 2006 11:26 AM Organiser 2. From the monthly view (with the go-to date highlighted), select Options > Make a note and one of the following note types: Meeting—Enter a subject, location, and a start/end date and time. Call—Enter a phone number, a name and the time. Birthday—Enter the person’s name and year of birth. Memo—Enter a subject, a start/end date and time. Reminder—Enter the subject and time of your reminder. You are given the option to set an alarm. 3. Enter your note, and select Save. View notes (day view) After you have created calendar notes, you can view them. 1. In the standby mode, select Menu > Organiser > Calendar. 2. Scroll to the date containing the note that appears in bold type, and select View. Options while viewing a list of notes 1. Select Options while viewing a day’s note to display the following: The options listed below are available while viewing the header of a note. Make a note—Create a new note for the selected date. Delete—Delete the note. Edit—Edit the note. Use detail—Use the details of the note. Move—Move the note to another date on your calendar. Repeat—Set the note (except for birthday note) to recur on a regular basis (daily, weekly, biweekly, monthly, and yearly).Go to date—Jump to another date on your calendar.Go to today—Jump to the current date on your calendar.Send note—Send the note to another device as a text message or in calendar-to-calendar format by way of SMS. 79
N6066_UG_EN_FCC_060831.fm Page 80 Friday, September 1, 2006 11:26 AM Organiser Copy—Copy the note for you to paste to another date. Settings—Set the date and time, date and time format, the day each week starts and whether you want your notes to autodelete after a specified time. Go to to-do list—Jump to the to-do list on your calendar. 2. Select an option to activate it or enter its submenu. Send a note 1. In the standby mode, select Menu > Organiser > Calendar. 2. Scroll to the date that appears in bold type, containing the note you want to send, and select View. 3. Scroll to the note you want to send, and select Options > Send note > Via calendar or Via text message > Text message. 4. If you selected Via calendar, enter the number for the recipient, or select Search to retrieve a number from the contacts list, and select OK. 5. If you selected Via text message > Text message, the note appears as a text message in the display. • Select Send to > Send to number, Send to many, or Send to distrib. list. • Enter the number for the recipient, or select Search to retrieve a number from the contacts list, and select Send. Receive notes When you receive a calendar note in calendar-to-calendar format, your device displays Calendar note received. • To view calendar notes, select Show, and if necessary, scroll to view the entire message. • To save calendar notes after viewing, select Save. • To discard calendar notes after viewing, select Exit or Options > Discard. When you receive a calendar note or text message, a message notification appears in the standby mode. You can save the note in your calendar and set an alarm for any date and time. 80
N6066_UG_EN_FCC_060831.fm Page 81 Friday, September 1, 2006 11:26 AM Organiser ■Notes You can write and save information in Notes and send notes using text message. In the standby mode, select Menu > Organiser > Notes. With no notes created, select Add note, create your note, and select Save when done. With notes already created, highlight the note you want to use, and select View to read or Options > Make a note, Delete, Use detail, Edit, Send note (as a text message), or Delete all notes. ■To-do list Use the to-do list feature to keep track of your tasks. You can save a note for a task, select a priority level for the note and mark it as done when you have completed it. You can sort the notes by priority or by date. Add a to-do note 1. In the standby mode, select Menu > Organiser > To-do list. 2. If there are no notes, select Add note. 3. Enter the subject of the to-do note, and select Save. 4. Select High, Medium, or Low priority. 5. Enter the due date and time to set the alarm. View a to-do note 1. In the standby mode, select Menu > Organiser > To-do list. 2. Highlight a to-do note, and select Options and one of the following: Add—Add another note. Delete—Delete the note. Mark note as done or Mark as not done—Mark a note or task as completed or not; if completed, no more reminders will follow.Use detail—Use the details of the note.Sort by deadline—Sort the notes according to their deadline.Send—Send the note to another device, as a text message, or as a calendar note to another compatible device.Go to calendar—Leave the to-do list, and go to the calendar.81
N6066_UG_EN_FCC_060831.fm Page 82 Friday, September 1, 2006 11:26 AM Organiser Save to calendar—Save the to-do note to a date on your calendar.Delete done notes—Delete all the completed to-do notes.Delete all notes—Delete all the to-do notes in the list.3. View the to-do note, and select Edit to edit the note or Options to select from the following:Deadline—Set a deadline for the note, listing any uncompleted notes if existing.Mark note as done or Mark as not done—Mark a note or task as completed ornot; if completed, no more reminders will follow.Delete—Delete the note.Use detail—Use the details of the note.Edit priority—Change the priority to high, medium, or low.Send—Send the note to another device, as a text message, or as a calendar note, or via infrared to another compatible device.Go to calendar—Leave the to-do list, and go to the calendar.Save to calendar—Save the to-do note to a date on your calendar.■Calculator The calculator in your device adds, subtracts, multiplies, divides, calculates the square and the square root, changes the sign of the number entered, and converts currency values. Note: This calculator, designed for simple calculations, has limited accuracy. 1. In the standby mode, select Menu > Organiser > Calculator. 2. Enter the first number in the calculation. Press # for a decimal point if necessary. To change the sign, select Options > Change sign, or scroll up or down.To perform a square or square root calculation, select Options > Square or Square root. To cycle through the add (+), subtract (-), multiply (*), and divide (/) characters, press *. 82
N6066_UG_EN_FCC_060831.fm Page 83 Friday, September 1, 2006 11:26 AM Organiser 3. Enter the second number in your calculation. 4. Select Equals to complete calculation or Options if more functions are required. Currency converter You can convert foreign currency to domestic, or vice versa, directly in the standby mode or from the Calculator menu. Note: When you change base currency, you must enter the new rates because all previously set exchange rates are set to zero. 1. In the standby mode, select Menu > Organiser > Calculator > Options > Exchange rate > Foreign unit in domestic units or Domestic unit in foreign units. Foreign unit in domestic units—The number of home units cost to make one unit of foreign currency.Domestic unit in foreign units—The number of foreign units cost to make one unit of your home currency.2. Enter the exchange rate (press # to insert a decimal), and select OK. 3. In the standby mode, enter the currency amount to be converted. 4. Select Options > In domestic or In foreign.In domestic—Converts foreign currency to domestic currency.In foreign—Converts domestic currency to foreign currency.5. If you do not enter an exchange rate, the device will prompt you to do so. Select OK. You can edit the exchange rate at anytime. ■Timer The countdown timer in your device enables you to enter a specific time (up to 99 hours and 59 minutes and 59 seconds). When the time runs out, your device sounds an alarm. Note: The countdown timer only works when the device is on. When you turn off your device, the timer is no longer active. 83
N6066_UG_EN_FCC_060831.fm Page 84 Friday, September 1, 2006 11:26 AM Organiser Set the timer 1. In the standby mode, select Menu > Organiser > Timer > Normal timer, Interval timers or Settings.Use Normal timer to measure the countdown time for tasks that have one period (timer name). Select Interval timers to save sets of countdown times with more than one period.2. Enter the time (in hh:mm:ss format), and select OK. 3. Enter a note for the timer, and select Start. appears in the standby mode with the countdown timer set. When the time runs out, your device sounds an alarm, displays the timer note, vibrates (if set), and flashes its lights. Press any key during the alarm to stop the alarm. After 60 seconds the timer alert stops automatically. Change the time After you have set the timer, you can change the time. 1. In the standby mode, select Menu > Organiser > Timer > Change time. 2. Enter the new time, and select OK. 3. Leave the note as it was, or enter a new note, and select Start. Interrupt the timer After you have set the timer, you can stop the timer. In the standby mode, select Menu > Organiser > Timer > Stop timer. ■Stopwatch You can use the stopwatch in your device to track time. The stopwatch displays time in hours, minutes, seconds, and fractions of a second in hh:mm:ss:ms format. Using the stopwatch or allowing it to run in the background when using other features increases the demand on battery power and reduces the battery life. Measure time 1. In the standby mode, select Menu > Organiser > Stopwatch > Split timing or Lap timing > Start. The running time is displayed. 84
N6066_UG_EN_FCC_060831.fm Page 85 Friday, September 1, 2006 11:26 AM Organiser Split timing—You can use the split time function for such things as a long distance race when you need to pace yourself. Select Split to note the lapsed time. The timer continues to run and the split time appears below the running time. Each time you select Split, the new measured time appears at the beginning of the list. Lap timing—You can use the lap time function when you want to track how long it takes to complete each cycle or lap. Select Lap to note the lap time. The clock stops, then starts immediately from zero. The lap time appears below the running time. Each time you select Lap, the new measured time appears at the beginning of the list. 2. Select Stop to end the timing and display the total time or Stop > Options > Start or Reset to continue or reset timing. Lap and split times To save a time while the clock is running, select Stop > Save, enter a name for the measurement, and select OK. If you do not enter a name, the total time is used asthe default title for the lap or split time.To view a saved time, in the standby mode, select Menu > Organiser > Stopwatch > Show last or View times.To delete a saved time from Stopwatch, select View times and the time to delete,and select Delete > Yes; or select Delete times > One by one or Delete all.Operation note If you press the end key and return to the standby mode, the clock continues to run in the background, and appears in the upper left corner. To return to the stopwatch screens, in the standby mode, select Menu > Organiser > Stopwatch > Continue. To stop the clock, select Stop. Other options You can choose the following options when you use the stopwatch:Continue—Appears when the stopwatch is working in the background.Show last— Appears when you have saved a split or lap time and displays the last time saved.Split timing—Asks if you want to discontinue previous timing.Lap timing—Asks if you want to discontinue previous timing.85
N6066_UG_EN_FCC_060831.fm Page 86 Friday, September 1, 2006 11:26 AM Organiser View times—Enables you to browse the saved times.Delete times—Enables you to delete any saved times. You can delete the saved times one by one or all at once.■World clock The World clock in your device enables you view the time in different countries. In the standby mode, select Menu > Organiser > World clock World clock, scroll left or right to browse different country's time, there is also a cross-cursor to locate the country's position on the world map. 86
N6066_UG_EN_FCC_060831.fm Page 87 Friday, September 1, 2006 11:26 AM Games 12. Games ■Games In the standby mode, select Menu > Games to display the games on your device: Deadline, Submarine and Magic bubbles. ■Application settings In the standby mode, select Menu > Games > App. settings.Scroll to one of the following submenus to activate options for preset or downloaded games or applications.App. sounds—Select On or Off.App. lights—Select App. defined or Default.App. vibration—Select On or Off.87
N6066_UG_EN_FCC_060831.fm Page 88 Friday, September 1, 2006 11:26 AM Enhancements 13. Enhancements Check the model number of any charger before use with this device. This device is intended for use when supplied with power from AC-3 or AC-4. Warning: Use only batteries, chargers and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. For availability of approved enhancements, please check with your dealer. A few practical rules about accessories and enhancements: • Keep all accessories and enhancements out of the reach of small children. • When you disconnect the power cord of any accessory or enhancement, grasp and pull the plug, not the cord. • Check regularly that enhancements installed in a vehicle are mounted and are operating properly. • Installation of any complex car enhancements must be made by qualified personnel only. Power: • Standard 780 mAh Li-Ion Battery (BL-4C) • Standard Travel Charger (AC-3) • Travel Charger (AC-4) • Mobile Charger (DC-4) • Charger Adapter (CA-44) Use the CA-44 charger adapter to connect the phone with Nokia chargers with a larger barrel size including ACP-7. 88
N6066_UG_EN_FCC_060831.fm Page 89 Friday, September 1, 2006 11:26 AM Enhancements Go to www.nokia.com/phones for more information about enhancements. 89
N6066_UG_EN_FCC_060831.fm Page 90 Friday, September 1, 2006 11:26 AM Battery information 14. Battery information ■Charging and discharging Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device. If a replacement battery is being used for the first time or if the battery has not been used for a prolonged period, it may be necessary to connect the charger then disconnect and reconnect it to begin charging the battery. Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time. If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made. Use the battery only for its intended purpose. Never use any charger or battery that is damaged. Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object. Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing. Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste. 90
N6066_UG_EN_FCC_060831.fm Page 91 Friday, September 1, 2006 11:26 AM Care and maintenance Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing it. • Do not attempt to remove the battery from the device. Nokia recommends that you take the device to the nearest authorized service facility for replacement of the battery. • Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged. • Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. • Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards. • Do not attempt to open the device other than as instructed in this guide. • Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics. • Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. • Do not paint the device. Paint can clog the moving parts and prevent proper operation. • Use a soft, clean, dry cloth to clean any lenses, such as camera, proximity sensor, and light sensor lenses. • Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the device and may violate regulations governing radio devices. • Use chargers indoors. • Always create a backup of data you want to keep, such as contacts and calendar notes, before sending your device to a service facility. 91
N6066_UG_EN_FCC_060831.fm Page 92 Friday, September 1, 2006 11:26 AM Care and maintenance All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service. 92
N6066_UG_EN_FCC_060831.fm Page 93 Friday, September 1, 2006 11:26 AM Additional safety information Additional safety information ■Operating environment Your device and its enhancements may contain small parts. Keep them out of the reach of small children. Remember to follow any special regulations in force in any area and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions. This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 1.5 cm away from the body. When a carry case, belt clip or holder is used for body-worn operation, it should not contain metal and should position the device the above-stated distance from your body. In order to transmit data files or messages, this device requires a good quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Ensure the above separation distance instructions are followed until the transmission is completed. ■Medical devices Operation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. PACEMAKERS Pacemaker manufacturers recommend that a minimum separation of 6 inches (15.3 cm) be maintained between a wireless device or phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. To minimize the potential for interference, persons with pacemakers should • Always keep the device more than 6 inches (15.3 cm) from their pacemaker when the device is switched on • Not carry the device in a breast pocket 93
N6066_UG_EN_FCC_060831.fm Page 94 Friday, September 1, 2006 11:26 AM Additional safety information • Hold the device to the ear opposite the pacemaker to minimize the potential for interference. If you have any reason to suspect that interference is taking place, switch off your device immediately. HEARING AIDS Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider. ■Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, air bag systems. For more information, check with the manufacturer or its representative of your vehicle or any equipment that has been added. Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that an air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. FCC regulations prohibit using your wireless device while in the air. The use of wireless telephones in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal. ■Potentially explosive environments Switch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refuelling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas, chemical plants or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical 94
N6066_UG_EN_FCC_060831.fm Page 95 Friday, September 1, 2006 11:26 AM Additional safety information transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust or metal powders. Failure to observe these instructions may lead to suspension or denial of telephone services to the offender, legal action, or both. ■Emergency calls Important: Wireless phones, including this device, operate using radio signals, wireless network, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies. To make an emergency call, make sure your device is properly charged before attempting any emergency calls. If your battery becomes empty, you cannot receive or make calls, including emergency calls and must wait a few minutes after the charging begins to place your call. 1. If the device is not on, switch it on. Check for adequate signal strength. Some networks may require that a valid UIM (CDMA SIM) card is properly inserted in the device. 2. Press the end key as many times as needed to clear the display and ready the device for calls. 3. Enter the official emergency number for your present location, and press the call key. Emergency numbers vary by location If certain features are in use, you may first need to turn those features off before you can make an emergency call. If the device is in an offline or flight mode you must change the profile to activate the device function before you can make an emergency call. Consult this guide or your service provider. When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so. ■Certification information (SAR) THIS MODEL PHONE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES. Your mobile device is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radio frequency (RF) energy recommended by international guidelines (ICNIRP). These limits establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations 95
N6066_UG_EN_FCC_060831.fm Page 96 Friday, September 1, 2006 11:26 AM Additional safety information through periodic and thorough evaluation of scientific studies. The standards and guidelines include a substantial safety margin designed to assure the safety of the public, regardless of age and health and to account for any variations in measurements. The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit stated in the international guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR level of an operating device can be well below the maximum value because the device is designed to use only the power required to reach the network. That amount changes depending on a number of factors such as how close you are to a network base station. The highest SAR value when tested according to international testing procedures for use at the ear is 0.7 W/kg. SAR values may vary depending on national reporting and testing requirements and the network band. Use of device accessories and enhancements may result in different SAR values. Additional SAR information may be provided under product information at www.nokia.com. USA and Canada: The SAR limit of USA (FCC) and Canada (IC) is 1.6 W/kg averaged over one gram of tissue. This device model has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 1.07 W/kg and when properly worn on the body is 1.14 W/kg. Information about this device can be found on the FCC's website at http://www.fcc.gov/oet/fccid by searching the equipment authorization system using FCC ID: QMNRM-211. Technical information Type designation: RM-211 Dimensions: Width 42.7 mm; Length 82.5 mm; Depth 22.8 mm Weight: 87g with 820mAh Li-Ion Battery (BL-4C) Display: Main display 128x160 pixels, 65K colors; sub display 96x64 pixels, 4K colors Camera: Integrated 300K pixels with digit zoom and flash Wireless network: CDMA 800 MHz, IS-95 and CDMA2000 1RTT Frequency range (Tx): Cellular 824-849 MHz Frequency range (Rx): Cellular 869-894 MHz 96

Navigation menu