Microsoft RM-139 GSM900/1800/1900 Cellular Telephone w/BT User Manual 9235874 3129 zh tw FCC

Microsoft Mobile Oy GSM900/1800/1900 Cellular Telephone w/BT 9235874 3129 zh tw FCC

Contents

Manual

DECLARATION OF CONFORMITYWe, NOKIA CORPORATION declare under our sole responsibility that the product RM-139 is in conformity with the provisions of the following Council Directive: 1999/5/EC.A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/.Copyright © 2005 Nokia. All rights reserved.Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.Nokia and Nokia Connecting People are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.Nokia tune is a sound mark of Nokia Corporation.US Patent No 5818437 and other pending patents. Tegic Communications, Inc. All rights reserved. Includes RSA BSAFE cryptographic or security protocol software from RSA Security.Java is a trademark of Sun Microsystems, Inc.This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged i9235874_3129_zh_tw_FCC.book Page i Wednesday, October 26, 2005 7:36 PM
iiin a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use.Additional information, including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See <http://www.mpegla.com>.Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice.The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.FCC NOTICEYour phone may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.This device may contain commodities, technology, or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.931155XIssue 19235874_3129_zh_tw_FCC.book Page ii Wednesday, October 26, 2005 7:36 PM
iiiFor your safetyRead these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.SWITCH ON SAFELYDo not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.ROAD SAFETY COMES FIRSTObey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.INTERFERENCEAll wireless devices may be susceptible to interference, which could affect performance.SWITCH OFF IN HOSPITALSFollow any restrictions. Switch the device off near medical equipment.SWITCH OFF IN AIRCRAFTFollow any restrictions.Wireless devices can cause interference in aircraft.SWITCH OFF WHEN REFUELLINGDo not use the device at a refueling point. Do not use near fuel or chemicals.SWITCH OFF NEAR BLASTINGFollow any restrictions. Do not use the device where blasting is in progress.USE SENSIBLYUse only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily.QUALIFIED SERVICEOnly qualified personnel may install or repair this product.ENHANCEMENTS AND BATTERIESUse only approved enhancements and batteries. Do not connect incompatible products.WATER-RESISTANCEYour device is not water-resistant. Keep it dry.9235874_3129_zh_tw_FCC.book Page iii Wednesday, October 26, 2005 7:36 PM
ivBACK-UP COPIESRemember to make back-up copies or keep a written record of all important information.CONNECTING TO OTHER DEVICESWhen connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.EMERGENCY CALLSEnsure the phone function of the device is switched on and in service. Press the key as many times as needed to clear the display and return to the start screen. Enter the emergency number, then press the key. Give your location. Do not end the call until given permission to do so.Network servicesTo use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize network services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services.Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your device may also have been specially configured. This configuration may include changes in menu names, menu order, and icons. Contact your service provider for more information.This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols.Some features of this device, such as MMS, browsing, e-mail and content downloading using the browser or over MMS, require network support for these technologies.For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.9235874_3129_zh_tw_FCC.book Page iv Wednesday, October 26, 2005 7:36 PM
vAbout your deviceThe wireless device described in this guide is approved for use on the GSM 900/1800/1900 and UMTS 2100 networks. Contact your service provider for more information about networks.When using the features in this device, obey all laws, and respect privacy and legitimate rights of others.When taking and using images or video clips, obey all laws, and respect local customs as well as privacy and legitimate rights of others.Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger.9235874_3129_zh_tw_FCC.book Page v Wednesday, October 26, 2005 7:36 PM
vi<Memo>9235874_3129_zh_tw_FCC.book Page vi Wednesday, October 26, 2005 7:36 PM
viiTable of Contents1. Getting to Know Your Device....................... 1Front View................................................................. 1Rear View with Backcover Opened .......................... 3Left Side View ........................................................... 4Right Side View......................................................... 4The Main Screen....................................................... 5Status Bar Icons........................................................ 5The Stylus ................................................................. 62. Getting Your Device Ready For Use............ 7Installing the SIM Card.............................................. 7Installing and Charging the Battery........................... 9Installing the Battery............................................... 9Removing the Battery........................................... 10Charging the Battery ............................................ 11Initial Setup ............................................................. 113. Basic Operations ....................................... 12Turning On/Off Your Device.................................... 12Turning On Your Device....................................... 12Turning Off Your Device....................................... 12Navigating the Main Screen.................................... 12Entering Text and Numbers .................................... 13Entering Text and Numbers Using the Virtual Keyboard............................................................................. 13Entering Latin Alphabets and Numeric Characters13Entering Chinese Characters ............................... 14Entering Text and Numbers Using the Handwriting Recognition Method.............................................. 14Entering Latin Alphabets and Numeric Characters14Entering Chinese Characters ............................... 154. Using the Phone Functions ........................16Making a Call .......................................................... 16Making a Call Using the Phone Screen................ 16Making a Call from the Contact List...................... 16Making a Call from the Call Log ........................... 16Making a Call Using Speed Dial ........................... 16Making a Call Using Voice Commander............... 17Answering a Call ..................................................... 17Ending a Call ........................................................ 17Operations During a Call......................................... 17Adjusting Volume.................................................. 17Holding/Retrieving a Call...................................... 18Making Another New Call During a Call ............... 18Answering an Incoming Call during a Call............ 18Switching Calls ..................................................... 18Ending All Calls .................................................... 18Conference Call ...................................................... 18Talking Privately to One Party during a Conference 9235874_3129_zh_tw_FCC.book Page vii Wednesday, October 26, 2005 7:36 PM
viiiCall ........................................................................18Releasing a Calling Party During a Conference Call19Ending a Conference Call .....................................19Call Logs..................................................................19Call Logs Options..................................................19Miscellaneous Operations .......................................20Ending All Calls .....................................................20Showing Cost ........................................................20Calling Voice Mail-box...........................................20Hiding/Showing My Number..................................20Transferring Sound ...............................................20Calling Emergency Numbers ................................20Adding Speed Dial ................................................21Removing Speed Dial ...........................................21Adding number to Contacts...................................21Copying/Pasting Number ......................................21Zoom .....................................................................22Adjusting Call Settings ..........................................22Adjusting Tones and Alerts ...................................22Enabling/Disabling Automatic Keypad Lock..........22Accessing Help .....................................................235. Using the Application Programs.................24The Main Screen .....................................................24Your Device Application Programs ..........................24Messaging ...............................................................27Creating and Sending Messages ..........................27Message Folders...................................................29Receiving and Viewing Messages........................ 29Contacts.................................................................. 30Creating a New Contact ....................................... 31Importing Contacts from a SIM Card.................... 31Exporting Contacts to a SIM Card........................ 31Viewing Contacts.................................................. 31Managing Contacts Folders ................................. 32Managing Contacts .............................................. 32Owner Card.......................................................... 34Contacts Preferences........................................... 34Calendar ................................................................. 34Creating New Calendar Entries............................ 35Calendar Views .................................................... 35Managing Calendar Entries.................................. 35Managing Calendar Folders ................................. 36Setting up Calendar Preferences ......................... 36Note ........................................................................ 37Creating Notes ..................................................... 37Managing Notes ................................................... 37Managing Note Folders ........................................ 38Settings................................................................... 38Device Settings .................................................... 38Connection Settings ............................................. 40Network Settings .................................................. 41Security Settings .................................................. 44General Settings................................................... 45Camera ................................................................... 509235874_3129_zh_tw_FCC.book Page viii Wednesday, October 26, 2005 7:36 PM
ixTaking Still Pictures.............................................. 50Capturing Video.................................................... 51Camera Options When Taking Pictures and Capturing Video .................................................................... 52Image Settings ..................................................... 52Video Settings ...................................................... 53Music Player ........................................................... 54Playing Music ....................................................... 54Operations When Playing Music .......................... 54Managing Songs .................................................. 55Managing Music Folders ...................................... 56Video Player............................................................ 56Viewing Video Clips Using Video Player .............. 56Managing Video Folders ...................................... 57Managing Video Clips .......................................... 57PhotoBase .............................................................. 58Viewing Images .................................................... 58Organizing Images ............................................... 60Sending Images ................................................... 60Editing Images...................................................... 61Adding Special Effects to images......................... 62Internet.................................................................... 65Connecting to/Disconnecting from the Internet .... 65Opening the Internet Browser .............................. 65Opening Page ...................................................... 65Key Operations When Browsing .......................... 66Bookmarking Pages ............................................. 66Saving Pages for Off-Line Browsing..................... 67Going to Bookmarked Pages................................ 67Operations When Viewing Pages......................... 67Managing Bookmarks........................................... 68Managing Bookmark Folders................................ 68Browser Preferences ............................................ 69Time ........................................................................ 70Viewing Current Time and Date ........................... 70Setting Time and Date.......................................... 70To-Do ...................................................................... 70Creating New Tasks ............................................. 71Viewing Tasks ...................................................... 71Managing Tasks ................................................... 71Managing Task Folders ........................................ 72To-Do Preferences ............................................... 72Calculator................................................................ 73Voice ....................................................................... 74Creating a New Voice Note .................................. 74Playing Voice Notes ............................................. 74Deleting Voice Notes ............................................ 75Sending Voice Notes ............................................ 75Online Services....................................................... 75GPRS Data Log ...................................................... 75Viewing GPRS Data Log ...................................... 75Resetting GPRS Data Count ................................ 76Deleting GPRS Data Log...................................... 766. Expanding the Capabilities of Your Device.779235874_3129_zh_tw_FCC.book Page ix Wednesday, October 26, 2005 7:36 PM
xInstalling Application Programs ...............................77Installing Application Programs from the Internet .77Installing Application Programs from Installation Files77Uninstalling Application Programs ........................77Installing/Removing a Memory Card........................78Installing a Standard Memory Card.......................78Installing a Mini SD Memory Card.........................78Removing a Memory Card ....................................79Formatting a Memory Card ...................................79Renaming a Memory Card ....................................797. Managing and Personalizing Your Device..80Managing Application Programs..............................80Grouping Application Programs ............................80Setting Application Programs on the Application Shortcut Bar ..........................................................80File Management .....................................................80Personalizing Your Device.......................................80Customizing User Profiles.....................................80Selecting a User Profile.........................................818. Getting Your Device Connected and Synchronized .................................................82Connecting the Device to Other Devices.................82Infrared Connection...............................................82USB Connection....................................................82Bluetooth Connection............................................82Using the Device as a GPRS Modem..................... 84Setting up GPRS Modem via USB Connection.... 84Setting up GPRS Modem via Bluetooth Connection85Synchronizing Data .............................................. 85Performing Remote Synchronization with a Server859. Troubleshooting Information ...................... 87Call Related Problems ............................................ 87Message Problems ................................................. 87Internet Problems.................................................... 88Application Program Problems ............................... 88Connection Problems.............................................. 89System Problems.................................................... 8910. Product Specifications ............................. 9011. Battery information................................... 92Charging and discharging....................................... 9212. Genuine Enhancements .......................... 93Power...................................................................... 93Travel Charger (AC-1001C) ................................. 93Audio....................................................................... 94Fashion Stereo Headset (HS-46) ......................... 9413. Care and Maintenance ............................ 9514. Additional Safety Information ................... 96Operating environment ........................................... 96Medical devices ...................................................... 96Pacemakers ......................................................... 969235874_3129_zh_tw_FCC.book Page x Wednesday, October 26, 2005 7:36 PM
xiHearing aids ......................................................... 96Vehicles................................................................ 97Potentially explosive environments......................... 97Emergency calls ................................................... 97To make an emergency call: ................................ 98Certification information (SAR) ............................... 9815. Limited Warranty.................................... 10016. Your Details............................................ 1029235874_3129_zh_tw_FCC.book Page xi Wednesday, October 26, 2005 7:36 PM
xii<Memo>9235874_3129_zh_tw_FCC.book Page xii Wednesday, October 26, 2005 7:36 PM
Getting to Know Your Device11. Getting to Know Your DeviceFront View(1)(2)(3)(4)(5)(6)(11)(10)(9)(8)(7)No. Name Description(1) Power key Press this key to turn power on and off.(2) Touch screenThe interface for displaying information and operating functions.(3) Call key • In the Main screen, press this key to go to the Phone screen.• If there is an incoming call, press this key to answer the call.• In the Phone screen, press this key to access the past call history.• In the Phone screen, press and hold this key for about 3 seconds to activate Voice Commander.(4) Left key Press this key to go to the preset mode. The default setting is Calendar.(5) Keypad Allows you to enter numbers, symbols and navigate in menus and screens.(6) Microphone Receives audio.(7) Earpiece Generates audio.(8) Network status/incoming call indicator• Flashes in blue: you are under your home network.• Flashes blue quickly: there is an incom-ing call.(9) Battery/message indicator• Flashes yellow: there is a new mes-sage or a missed call.• Lights up in red: the battery is being charged.• Flashes red: the battery is running low.9235874_3129_zh_tw_FCC.book Page 1 Wednesday, October 26, 2005 7:36 PM
Getting to Know Your Device2(10) End key When there is an incoming call, press this key to reject the call.(11) Right Key • Press this key to go to the preset mode. The default setting is Contacts.• Press and hold this key for approxi-mately 3 seconds to activate/deacti-vate Silent mode.9235874_3129_zh_tw_FCC.book Page 2 Wednesday, October 26, 2005 7:36 PM
Getting to Know Your Device3Rear View with Backcover Opened(1)(2)(5)(6)(7)(9)(8)(3)(4)No. Name Description(1) Stylus and stylus housingAccommodates the stylus.(2) Loudspeaker Generates audio.(3) Self-taking mirrorUsed when taking your self photo.(4) Camera Built-in type camera set for taking pictures and video clips.(5) SIM card socket Allows you to install a SIM card.(6) SIM card stay Holds the SIM card in place.(7) Battery latch Fixes the battery in place.(8) USB connector Connects to a PC via the supplied data cable.(9) Battery charger connectorConnects to the battery charger.9235874_3129_zh_tw_FCC.book Page 3 Wednesday, October 26, 2005 7:36 PM
Getting to Know Your Device4Left Side View Right Side ViewNo. Name Description(1) Function side keyAllows you to set as a hotkey to your desired function. (2) Volume control keyAllows you to control volume.(3) Memory card slotAllows you to install an SD memory card.(4) Headset connectorConnects the device to a compatible headset.(1)(4)(3)(2)No. Name Description(1) Camera keyPress this key to go to the Camera screen for taking pictures or capturing video clips.(2) Infrared windowConnects to other devices that support Infrared connection.(1)(2)9235874_3129_zh_tw_FCC.book Page 4 Wednesday, October 26, 2005 7:36 PM
Getting to Know Your Device5The Main Screen Status Bar IconsNo. Name Description(1) Application shortcut barContains shortcut icons for instant access to frequently used application programs. You can also customize this shortcut bar.(2) Menu bar Displays menu options in each application program screen.(3) Application program iconsAllows you to access application programs on your device. Tap an icon to open the application program it represents.(4) Status bar Displays various status icons.(5) Folder menuTap this item to open a menu where you can organize your application programs or data using different folders.(6) Scroll buttonsTap the up or down arrow on tis button to scroll pages up or down in a screen.(1)(2)(3)(4)(5)(6)Icon DescriptionIndicates signal strength. The more the vertical green bars displayed, the better the signal reception. Appearance of the blue bars indicates that the GPRS network is connected.• The icon indicates that GSM network signal is available but no GPRS network is attached. • The icon indicates that GPRS network is available but no GSM network is attached. Tap this icon to open the virtual keyboard.Indicates the status of audio setting.: the speakerphone is currently turned on: the speakerphone is currently in silent mode: the microphone has been mutedIndicates that an alarm has been set.Indicates battery status.: Battery full: Battery emptyAppears when a call is in progress.Indicates that you have missed call(s).This icon appears when you have a new SMS message.This icon appears when you have a new MMS message.Indicates that the infrared function has been turned on.9235874_3129_zh_tw_FCC.book Page 5 Wednesday, October 26, 2005 7:36 PM
Getting to Know Your Device6The StylusThe touch screen and stylus design allows you to easily and comfortably enter and browse information on your device.You can take out the stylus from the device by gently pulling it from the stylus housing as illustrated below:The stylus can be further stretched to facilitate the convenience of use.When you want to put the stylus back, slowly insert it back into the stylus housing.You can use the pointed tip of the stylus to touch an icon on the screen and to execute the function represented by that icon. This is expressed as “tap” an icon in this users guide. You can also use the stylus to enter text and numbers in combination with the handwriting input method.Important: Use only a stylus approved by Nokia for use with this device. Using any other stylus may invalidate any warranty applying to the device and may damage the touch pad. Avoid scratching the touch pad. Never use an actual pen or pencil or other sharp objects to write on the touch pad.Indicates that infrared function is not turned on.Indicates that the Bluetooth connectivity function has been turned on.Indicates that your phone is discoverable in the Bluetooth network.Indicates that Bluetooth connectivity is in progress.This icon appears when a headset has been connected to the device.This icon appears when the keypad is locked.9235874_3129_zh_tw_FCC.book Page 6 Wednesday, October 26, 2005 7:36 PM
Getting Your Device Ready For Use72. Getting Your Device Ready For Use Installing the SIM CardUpon the completion of your subscription to your network service provider, you receive a SIM (Subscriber Identity Module) card. This card is used to store the services you have subscribed to your network service provider. For example, your phone number and phone book information.Important: For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.Note: You can still use some functions of your device without SIM card in offline mode. You can still use the device without a SIM card in Offline mode. To set Offline mode, refer to "Offline" on page 43.1. Turn the device over and locate the SIM card socket.SIM card socket9235874_3129_zh_tw_FCC.book Page 7 Wednesday, October 26, 2005 7:36 PM
Getting Your Device Ready For Use82. Slide the SIM card in under the metal plate in the SIM card slot with the SIM card's metal contacts facing down and the cut corner at the bottom right.Tip! If you want to remove the SIM card, please do the following:1. Turn off the power of your device.2. Remove the battery.3. Press down the SIM card stay (as illustrated).4. Push the card out of the slot.Note: A PIN (Personal Identity Number) is associated with the SIM card. The four-digit code is supplied with the SIM card from your service provider and may have to be entered when powering on the device. For more informa-tion, contact your network service provider.SIM card stay9235874_3129_zh_tw_FCC.book Page 8 Wednesday, October 26, 2005 7:36 PM
Getting Your Device Ready For Use9Installing and Charging the BatteryInstalling the Battery1. Press the button at the bottom of the back cover and slide the cover off the device. 2. Place the battery on the device with the battery’s contacts facing downwards and the tooth on the bottom edge of the battery in alignment with the hole on the device, and then press the battery down gently to click it back into place.9235874_3129_zh_tw_FCC.book Page 9 Wednesday, October 26, 2005 7:36 PM
Getting Your Device Ready For Use104. Push the back cover down on the device and slide it into place.Removing the Battery1. Turn off the power of the device.2. Press the button at the bottom of the back cover and slide the cover off the device. 3. Slide the battery latch backward and lift the battery upward.9235874_3129_zh_tw_FCC.book Page 10 Wednesday, October 26, 2005 7:36 PM
Getting Your Device Ready For Use114. Remove the battery from the device.Important: Do not remove the battery when your device is on: you could lose all your personal settings stored either in your SIM card or in Nokia 6708 memory.Charging the Battery1. Insert the charger connector into the battery charger socket at the bottom of the device. Make sure you insert the con-nector with the arrow sign on the top.2. Plug the charger into a mains outlet.3. After your phone is fully charged, disconnect the charger from the mains outlet and your phone.Note: It takes approximately 8 hours for the travel charger to fully charge a new battery. However, actual time needed may vary.• It takes at least one charging-discharging cycle for the bat-tery to reach its peak performance.• Your device can also be charged when connected to the USB via the supplied data cable.• During charging, the screen of the device will indicate the status of the battery being charged when powered off, and the Battery/appointment/message indicator will stay red.• When the battery is low, you will be prompted by a mes-sage on the screen. When the battery is running out of power, another message will appear to remind you to recharge immediately. Your phone will then power off automatically.Initial Setup1. Press and hold the power key for approximately 3 seconds. 2. The initial setup screen will follow within a few seconds, asking you to select the language you want to use. Use the stylus to tap the appropriate buttons and options, and then follow the instructions on the screen to proceed.Note: Refer to "Setting Date and Time" on page 70 for how to setup current date and time.9235874_3129_zh_tw_FCC.book Page 11 Wednesday, October 26, 2005 7:36 PM
Basic Operations123. Basic OperationsTurning On/Off Your DeviceTurning On Your DevicePress and hold the power key for approximately 3 seconds. The welcome screen will appear.Turning Off Your DeviceWhen the power of the device is on, press and hold the power key for approximately 3 seconds.Navigating the Main ScreenIn the Main screen, you can:• Use the stylus to tap the desired icons in order to open a pro-gram or select options.• Use the keys on the device to perform simple selection and confirmation:• Press the key to move the selection focus up.• Press the key to move the selection focus down.• Press the key to move the selection focus left.• Press the key to move the selection focus right.• Press the key to confirm selection.• Press the key to go to the first page.• Press the key to go to the last page.• Press the key to go to the previous page.• Press the key to go to the next page.UpDownLeftNext pageRightSelect/ConfirmLast pagePrevious pageFirst page9235874_3129_zh_tw_FCC.book Page 12 Wednesday, October 26, 2005 7:36 PM
Basic Operations13Entering Text and NumbersEntering Text and Numbers Using the Virtual KeyboardWhenever you want to enter/edit text and numbers, or when you tap the icon, the virtual keyboard will appear on the screen.Please refer to the illustration below for a detailed description of each part of the virtual keyboard and their functions.Entering Latin Alphabets and Numeric Characters1. Tap the icon to switch to the Latin alphabet input mode, or the icon to switch to the numeric character input mode.2. Tap the desired buttons on the virtual keyboard. The text will appear in the Text display area.3. Tap the Done button and the text will be placed in the text entry field.(a) (b) (c) (d)(e)(f)Part Name Description(a) Edit menu Tap this icon to open a menu where you can select the Copy, Cut and Paste commands and keyboard language.(b) First field button Tap this button to go to the first text entry field.(c) Last field button Tap this button to go to the last text entry field.(d) Done button Tap this button to hide the virtual keyboard.(e) Text display areaDisplays the text you entered.(f) Input mode buttonsTap these buttons to switch among different input modes.9235874_3129_zh_tw_FCC.book Page 13 Wednesday, October 26, 2005 7:36 PM
Basic Operations14Entering Chinese Characters1. Tap the or button to switch to the Pinyin or Stroke input method.2. Tap the desired buttons on the virtual keyboard.3. The candidates that match the phonetic symbols/pinyin combination or strokes you tapped will appear in the Candi-date area.If the Chinese character you want to enter appears in the candidate area, tap it and it will appear in the Text display area. The possible associated characters will then follow in the Candidate area. You can tap to choose an associated character directly, or continue entering another character by tapping the keys on the keyboard.4. Tap the Done button and the text will be placed in the text entry field.Entering Text and Numbers Using the Handwriting Recognition Methodyour device is equipped with a powerful handwriting recognition system that enables you to input data more naturally and efficiently.Whenever text entry is required, the following handwriting tool bar will appear on the screen.Entering Latin Alphabets and Numeric Characters1. Tap to change among Latin alphabet, numeric character or symbol input modes. If the current field is a numeric field - the mode is automatically switched to number.2. Write from left to right and continuously on any part of the screen. When you stop writing, your strokes will be recog-nized and text will be placed in the input field automatically.• Tap to open a menu that allows you to quickly enter cer-tain punctuation marks.• Tap to start a new line, to add a space (or write from up to right). To delete a previously entered char-acter, tap (or write from right to left).• Tap to open Help.• Tap to collapse, or to extend the Handwriting tool bar.Candidate area9235874_3129_zh_tw_FCC.book Page 14 Wednesday, October 26, 2005 7:36 PM
Basic Operations15• Tap or to switch between handwriting and selecting mode.• Tap and drag to adjust the position of the handwriting toolbar on the screen.Entering Chinese Characters1. Tap to switch to the Chinese input mode.2. Tap to change among Chinese character, numeric character or symbol input modes.3. Write the character on the screen. When you stop writing, your strokes will be recognized and the possible candidates will appear in the candidate area.If the Chinese character you want to enter appears in the candidate area, tap it and it will be placed in the input field automatically.• Tap to open a menu that allows you to quickly enter cer-tain punctuation marks.• Tap to start a new line, to add a space (or write from up to right). To delete a previously entered character, tap (or write from right to left).• Tap to open Help.• Tap or to collapse or extend the Handwriting tool bar.• Tap to extend the candidate area.• Tap or to switch between handwriting and selecting mode.• Tap and drag to adjust the position of the handwriting toolbar on the screen.To setup handwriting recognition settings to fit your personal writing habits, please refer to "Setting up smARTwriter" on page 39.Candidate area9235874_3129_zh_tw_FCC.book Page 15 Wednesday, October 26, 2005 7:36 PM
Using the Phone Functions164. Using the Phone FunctionsYour device provides the phone functions with which you can:• Make and receive phone calls.• View phone records, including incoming calls and outgoing calls.• Use voice commander to initiate calls.• Access advanced phone features, for example, call barring and call divert.Note: For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. Making a CallTo make an outgoing call, you have the following options:Making a Call Using the Phone Screen1. Press the key, and then tap the tab to go to the Phone screen.2. Tap the numeric buttons on the Phone screen, or press the numeric keys on the keypad to enter the number you want to call.Tip! To clear a wrong number, tap the button, or press the key.3. Tap the button, or press the key to ini-tiate the call.Making a Call from the Contact List1. Press the key to open the Contact screen.2. Tap to select a contact that contains the number you want to call. The contact will appear on the screen.3. Tap the phone number of the record, and the call will be ini-tiated automatically.Making a Call from the Call Log1. Press the key, and then tap the tab to switch to the Call Log screen.2. Tap a call log item on the Call Log screen. The content of the selected call log item will appear.3. Tap the button, or press the key to ini-tiate the call.Making a Call Using Speed Dial1. Press the key, and then tap the tab to switch to the Speed Dial screen.9235874_3129_zh_tw_FCC.book Page 16 Wednesday, October 26, 2005 7:36 PM
Using the Phone Functions172. Tap a speed dial icon on the screen, or press and hold a numeric key on the keypad representing the number (name) you want to call. The call will be initiated automat-ically.Note: Refer to "Adding Speed Dial" on page 21 for how to set up speed dial.Tip! You can repeat making the last dialed call by pressing the key.• You can also call the first 9 numbers in your Contacts by pressing a numeric key followed by the and key on your device. For example, to call contact #7, press , , .Making a Call Using Voice Commander1. Press and hold the key for about 3 seconds. The Voice Commander will appear on the screen prompting you to say the command.2. Speak the name you recorded for the contact you want to call.3. Your device will identify the name and initiate the call.Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances.Answering a CallWhen you have an incoming call, caller’s name (if available, depending on the setting of the caller’s phone and the network), picture (if enabled) and the following options will appear on the screen.Answer: Tap this button to answer the call. You can also answer the call by pressing the key.Mute: Turn off the ring signal temporarily. you can choose to tap the Answer button to answer it later, or the Send busy button to reject it.Send busy: Tap this button to reject the call (or press the key). Ending a CallTo end a call, tap the End button, or press the key.Operations During a CallAdjusting Volume1. During a call, tap the icon on the Status bar. The Sounds dialog will appear. Alternatively, you can press the volume key on the left side of the device.2. Tap and drag the Call volume slider to adjust call volume. You can also tap the Speaker phone or Mute microphone 9235874_3129_zh_tw_FCC.book Page 17 Wednesday, October 26, 2005 7:36 PM
Using the Phone Functions18check box to play sound via the speaker phone or mute the microphone during the call.Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.Holding/Retrieving a CallDuring a call, tap the Hold button to hold current call. To retrieve the held call, tap the Retrieve button.Making Another New Call During a CallDuring a call, use the numeric buttons on the Phone screen, or press the numeric keys on the keypad to make another call. The call in progress will be put on hold automatically.Answering an Incoming Call during a CallTo answer an incoming call during a call, tap the Answer button, or press the key. The current active call will be put on hold automatically. When the new incoming call is disconnected, the old call will be retrieved automatically.Switching CallsIf you have multiple active calls in progress simultaneously, you can tap the Switch button to switch calls.Ending All CallsTo end all active calls, tap the End button or press the key.Conference CallTo make a conference call (network service):1. During a call, make a new call to another new calling party, or answer a new incoming call. Repeat this step if there are multiple calling parties.2. Tap the Join calls button. All active calling parties will be joined together.Talking Privately to One Party during a Conference Call1. Tap the party you would like to call privately.2. A menu will appear. Tap Extract party. The selected calling party will become the only active one and others will be put on hold automatically.9235874_3129_zh_tw_FCC.book Page 18 Wednesday, October 26, 2005 7:36 PM
Using the Phone Functions19Releasing a Calling Party During a Conference Call1. Tap a calling party on the screen.2. A menu will appear. Tap Release party.Ending a Conference CallTo end a conference call, tap the End button.Call LogsThe Call Logs function provides you with the records of the following call types:• Answered calls (indicated by the icon)• Outgoing calls (indicated by the icon)• Missed calls (indicated by the icon)• Rejected calls (indicated by the icon)Tip! If you have missed call(s), the Missed calls dialog will stay on the screen letting you know about the number of calls missed. Tap the View button to enter the Missed Call Logs screen. If Cancel is tapped, the icon will stay on the screen and you can tap it to open the Missed calls dialog box.To access Call Logs:1. Press the key, and then tap the tab to open the Call Logs screen.2. Tap All Calls to open a menu for selecting the type of call logs you want to view.3. Tap to select a call type on the menu, and the correspond-ing call logs will appear on the screen.4. Tap a call log record and the detail information will appear on the screen.Tip! You can make a phone call from a call log record. Please refer to "Making a Call from the Call Log" on page 16 for details.Call Logs OptionsViewing Call Information1. Press the key, and then tap the tab to open the Call Logs screen.2. Tap Phone and select Total call info.3. The Total call info screen will appear. You can tap the Reset button to reset call information, or tap the Done button to exit.Deleting All Call Logs1. Press the key, and then tap the tab to open the Call Logs screen.2. Tap Phone and select Delete all calls.9235874_3129_zh_tw_FCC.book Page 19 Wednesday, October 26, 2005 7:36 PM
Using the Phone Functions20Miscellaneous OperationsPress the key, and then tap the tab to go to the Phone screen. Tab Phone and you will find the following options.Ending All Calls1. Return to the Phone screen.2. Tap Phone and select End all calls.Showing CostWhen enabled, upon ending an outgoing call, the cost of the call will appear on the screen.Note: The actual invoice for calls and services from your service provider may vary, depending on network fea-tures, rounding off for billing, taxes and so forth. To show cost, refer to "Call settings" on page 47 to set the Call cost first.Calling Voice Mail-boxPress and hold the key to start calling your voice mail-box.Note: If your voice mail-box number is not set, you will be prompted to enter it. The voice mail-box number is available from your network service provider.Hiding/Showing My NumberWhen making an outgoing call, you can choose to hide or show your phone number to the recipient of your call.1. Press the key, and then tap the tab to enter the Phone screen.2. Enter the phone number you want to call.3. Tap Phone and select Hide my number or Show my number.4. Tap the button, or press the key to ini-tiate the call.Transferring SoundDuring a call, you can use this option to transfer the call from the paired Bluetooth headset to the handset.1. Press the key to enter the Phone screen.2. Tap Phone and select Transfer sound.Note: To enable this function, you have to pair your device with a Bluetooth headset first. Once the call is trans-ferred from the Bluetooth headset to the device during a call, you cannot transfer the call back to the Bluetooth headset again.Calling Emergency NumbersThis operation allows you to easily access the pre-stored emergency numbers.9235874_3129_zh_tw_FCC.book Page 20 Wednesday, October 26, 2005 7:36 PM
Using the Phone Functions211. Press the key, and then tap the , , or tabs to enter the Phone screen.2. Tap Phone and select Emergency numbers.3. Tap to choose an emergency number from the box, and then tap the Done button to begin dialing the selected number.Tip: Depending on your local network service, the emergency numbers may be called without a SIM card as long as you are under the GSM network coverage. Please check with your network service provider for details.Adding Speed DialMethod 11. Press the key, and then tap the tab to switch to the Speed Dial screen.2. Tap to choose an empty speed dial icon. A Select contact window will appear. 3. Choose an appropriate folder, and tap to select a contact from the window, then tap the Done button.Method 21. Press the key, and then tap the tab to switch to the Speed Dial screen.2. Press and hold a numeric key representing an empty speed dial on the keypad for about 3 seconds. 3. A Select contact window will appear. Choose an appropri-ate folder, and tap to select a contact, then tap the Done button.Removing Speed Dial1. Press the key, and then tap the tab to switch to the Speed Dial screen.2. Tap Edit and select Remove speed dial.3. The Remove speed dial window will appear. Tap to select the speed dial numbers you want to remove and then tap the Done button.Adding number to Contacts1. Press the key, and then tap the tab to enter the Phone screen.2. Enter the phone number.3. When finished, tap Edit and select Add to contacts.Copying/Pasting NumberWith this operation, you can copy the number you entered in the Phone screen for pasting onto other application programs, for example, Calendar, or copy the number in other application programs onto the Phone screen.9235874_3129_zh_tw_FCC.book Page 21 Wednesday, October 26, 2005 7:36 PM
Using the Phone Functions22Copying number1. Press the key, and then tap the tab to enter the Phone screen.2. Enter the phone number.3. When finished, tap Edit and select Copy number.Pasting number1. Copy the phone number from other application programs.2. Press the key, and then tap the tab to enter the Phone screen.3. Tap Edit and select Paste number.ZoomThis operation enlarges the user interface on the screen for easier identification and access.1. Press the key to enter the Phone screen.2. Tap Edit and select Zoom.Adjusting Call SettingsYou can access Call settings following either of the methods below:• In the Phone screen, tap Edit and select Call settings.• Go to Settings by tapping the icon in the Main screen, and then tap Call settings on the General tab.For more information about Call settings, see "Call settings" on page 47.Adjusting Tones and AlertsThis operation allows you to customize the audio settings of your device.1. Press the key, and then tap the tab to enter the Phone screen.2. Tap Edit and select Tones and alerts.3. Tap to choose a profile from the menu that appears.4. Adjust sound settings by selecting a sound for each setting item (for example, ringing tone, SMS sound, or MMS sound.) from the menu, or select Find sound to locate a sound file on your device.5. Tap the Save button to save your settings for the selected pro-file, or the Done button to save and apply your settings.Enabling/Disabling Automatic Keypad Lock1. Tap the icon on the Application shortcut bar.2. Tap View and select Keypad lock.3. A Keypad lock box will appear. Tap to check/uncheck the Enable automatic keypad lock check box and then tap the Done button to enable/disable automatic keypad lock.9235874_3129_zh_tw_FCC.book Page 22 Wednesday, October 26, 2005 7:36 PM
Using the Phone Functions23If automatic keypad lock is enabled, the keys on your device or buttons on the Phone screen will be locked if there is no key or button operation for 30 seconds.Tip: You can also press the key, then the key in the Phone screen to enable keypad lock.To disable keypad lock, press the key, and then the key. Accessing HelpThe Help system on your device provides you with instant information about how to use your device.To access Help:1. Press the key to enter the Phone screen.2. Tap Edit and select Help.9235874_3129_zh_tw_FCC.book Page 23 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs245. Using the Application ProgramsThe Main ScreenThe Main screen is where you can easily access the application programs on your device (for example, Agenda, Contacts, Messaging, and Web).• Tap the icon on the Application shortcut bar, all applica-tion program icons on your device are displayed. Tap an application program icon to open the application program it represents.• You can also tap one of the icons at the top of the screen. These are shortcuts that are always visible. To customize your shortcuts, see "Setting Application Programs on the Application Shortcut Bar" on page 80.If you have a lot of application programs on your device, use folders to organize them in the Main screen. There are pre-set folders, such as Office (for business application programs) and Internet (for web-based application programs). To organize your application programs in folders, see "Grouping Application Programs" on page 80.Your Device Application ProgramsYour device comes pre-installed with the following application programs:PhoneFor using the phone functions. See "Using the Phone Functions" on page 16 for details.MessagingFor creating, sending and receiving messages. See "Messaging" on page 27 for detailsContactsFor managing your contacts. Your contact database can also be used for making phone calls or sending emails. See "Contacts" on page 30 for details.CalendarFor organizing your personal appointments and events. See "Calendar" on page 34 for details.NoteA very useful program for jotting down memos. See "Note" on page 37 for details.SettingsAllows you to setup the settings of your device. See "Settings" on page 38 for details.9235874_3129_zh_tw_FCC.book Page 24 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs25CameraUse this application program with the built-in camera for capturing still photos and video clips. See "Camera" on page 50 for details.Music playerWith this application program you can listen to music transferred from your PC or downloaded from the Internet. See "Music Player" on page 54 for details.Video playerFor playing video clips captured by the built-in camera, transferred from your PC or downloaded from the Internet. See "Video Player" on page 56 for details.PhotoBaseAllows you to view and edit images on your device. See "PhotoBase" on page 58 for details.InternetAllows you to surf the Internet and access various on-line information. See "Internet" on page 65 for details.TimeFor configuring time/date information and setting alarms. See "Time" on page 70 for details.To - d oFor tracking your daily todo items. See "To-Do" on page 70 for details.CalculatorYour handy calculator for making calculations. See "Calculator" on page 73 for details.Remote syncFor performing synchronization via remote connection, refer to "Performing Remote Synchronization with a Server" on page 85 for details.VoiceFor recording and playing voice notes. See "Voice" on page 74 for details.Screen saverFor displaying the screen saver of your device.Online servicesFor accessing services of your network service provider. See "Online Services" on page 75 for details.GPRS data logFor tracking your GPRS connection history. See "GPRS Data Log" on page 75 for details.9235874_3129_zh_tw_FCC.book Page 25 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs269 BallYou can play the built-in billiards on the device. For details, read the help document.• Press or to switch to different options.• Press to enter or exit the selected option.Extra ApplicationsThis feature provides you the access to the support pages which requires GPRS connection. With this feature you can install the software on your device or access the care and service information.File ManagerThe function allows you to manage the files on the device, or check the memory information.QuickpointAllows you to view Powerpoint presentations and open native PC format e-mail attachments directly on your device. For details, tap View to read Help.QuicksheetThis application provides 84 of the commonest formulae found in Microsoft Excel on your device. For details, tap View to read Help.QuickwordThis application allows you to work with text and word processing documents on your device. For details, tap View to read Help.ReconWith this application program you can use your smart phone to remote control some of your home applications such as TV, DVD player, Air conditioner and so on. Stuntcar ExtremeYou can play the built-in car race game. For details, read Help.Super Drop ManiaA built-in game for you to play. For details, read Help.Voice CommanderThis program allows you to control your smart phone by voice. You can use voice to make a phone call, look up contact person's information or start a program.XLex DictionaryA built-in dictionary on the device allows you to look up the English and Chinese words. For details, tap XLex Dictionary and read Help.9235874_3129_zh_tw_FCC.book Page 26 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs27MessagingWith the Messaging application program, you can exchange and manage the following types of messages:Note: You need subscription to related services to your network service provider.• In order to use the Messaging functions, you may need to set up message settings in advance. Please refer to "Mes-saging accounts" on page 43 and "Internet accounts" on page 42.SMS (Short Message Service) messages (indicated by the icon)An SMS message is a text message delivered from your device via the message center of your service provider to the recipient. In addition to text, it can contain pictures, sounds, melodies and animations.MMS (Multimedia Message Service) messages (representedby the icon)An MMS message is a message that can contain text, pictures, animations, audio clips and melodies.Important: Exercise caution when opening messages. Multimedia message objects may contain malicious soft-ware or otherwise be harmful to your device or PC.Email messages (represented by the icon)Messages that support POP3, IMAP4, MIME and SMTP protocols and are the same as the ones you can send and receive using your PC.Important: Exercise caution when opening messages. email messages may contain malicious software or other-wise be harmful to your device or PC.Creating and Sending MessagesCreating and Sending an SMS Message1. In the Messaging screen, tap SMS.2. Tap the New button, or tap Message and select New.3. Enter the recipient’s phone number in the To : field. You can also tap To : to pick up one or multiple recipient from your contacts.4. Enter the body text of the message. An SMS message allows the entry of up to 160 characters (70 for non-latin charac-ters) per message, and if the length of your message body exceeds such limit, it will be split into several separate ones and combined into one single message on the recipient’s phone (if supported). You can tap located at the upper right corner of the screen to get the information about current message length information.Tip: You can tap Edit and select the Cut, Copy, Paste and Select all commands when editing text.9235874_3129_zh_tw_FCC.book Page 27 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs285. (Optional) Tap the button to insert a smiley into the message.6. (Optional) Tap the button to insert an animation into the message.7. (Optional) Tap the button to insert sound into the mes-sage.8. (Optional) Tap the button to switch between normal and bold text types.9. (Optional) Tap the button to change text size.10. (Optional) Tap the button to view common used text.11. Tap the tab to determine if you want to receive a deliv-ery report for current message. Tap to select On or Off. If On is selected, you will receive a report regarding the delivery status when the message is sent.12. Tap the Send button to send the message. If you want to save the message in the Draft box for future editing, tap the button.Note: If for any reason the message can not be sent, it will be stored in the Outbox.Creating an MMS Message1. In the Messaging screen, tap MMS.2. Tap the New button, or tap Message and select New.Note: An MMS message comprises several slides and you can add text and sounds to each slide. When the mes-sage is opened and viewed on the recipient’s phone, the slides are automatically played. The sound will also be played if the slide contains it.3. Enter the recipient’s phone number in the To: field. You can also tap To : to pick up one or multiple recipient from your contacts.4. Enter the subject in the Subj: field.5. Enter message body text.6. (Optional) Tap the icon to browse and insert an image into current slide. To change or delete selected image, tap the image and select Select image or Delete image.7. (Optional) Tap the icon to insert sounds into current slide.8. (Optional) To add more slides, tap the icon, or tap Mes-sage and then select New slide. To go to a slide, tap or . To delete current slide, tap Message and then select Delete slide. You can also tap to setup the duration of each slide.9. To preview the slides, tap the icon.10. Tap to go to the tab where you can select the carbon copy and blind carbon copy recipients, select a priority level for the message, and check the message size.9235874_3129_zh_tw_FCC.book Page 28 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs2911. Tap to go to the tab where you can attach an image, audio recording, video clip, document or other files to cur-rent message.12. Tap the Send button to send the message. If you want to save the message in the Draft box for future editing, tap the button.Note: If for any reason the message can not be sent, it will be stored in the Outbox.Creating an Email MessageNote: In order to use email, you need to complete message settings in advance. Please refer to "Messaging accounts" on page 43.1. In the Messaging screen, tap an email account.2. Tap the New button, or tap Message and select New.3. Enter the recipient’s email address in the To: field. You can also tap To : to pick up one or multiple recipient from your contacts.4. Enter the subject in the Subj: field.5. Enter the message body text.6. (Optional) Tap the button to browse and add attach-ment to the mail.7. Tap the Send button to send the email. A dialog will pop up asking whether you want to send the message immediately or save the message to Outbox for sending later. Tap to select an appropriate option and then tap the Done button.Note: If for any reason the message can not be sent, it will be stored in the Outbox.Message FoldersBy default, each message account has 4 different message fold-ers:• Inbox: Contains received messages.• Outbox: Contains messages that are ready to be sent but not sent.• Draft: Contains unfinished messages.• Sent: Contains a copy of the sent messages.You can tap a folder name at the upper right corner of each mail account screen and tap to select a different folder. Receiving and Viewing MessagesReceiving and Viewing SMS and MMS MessagesWhen you have new unread SMS or MMS messages, the notification icon ( for SMS, for MMS) will appear on the Status bar. You can tap the icon to view the message.When viewing messages, you can tap Message and choose to perform the following operations:• New: Create a new message.• Reply: Reply to the sender.• Forward: Send the received message to other recipients.• Find: Find a specific word in the message.9235874_3129_zh_tw_FCC.book Page 29 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs30• Find next: Find the word again.• Call Sender: Make a call to the sender of the message.• Move to SIM Card or Move to Messaging (available for SMS messages): Move current message to the memory on SIM card or your device, depending on where the message is cur-rently saved.• Delete message: Delete current message.You can also tap the From: field and select to perform the following actions:• Call: Call this number.• Send SMS: Send an SMS message to this number.• Send MMS: Send an MMS message to this number.• Save contact: Save this number as a new contact.Receiving and Viewing Email1. In the Messaging screen, tap an email account.2. Tap the Get&Send button.Note: In order to receive and view email, you need to set up Internet and message settings in advance. Please refer to "Messaging accounts" on page 43 and "Internet accounts" on page 42.3. You will be connected to the Internet automatically, and the device will start receiving email from your mailbox.4. The received email will appear on the screen. Tap an email message to open and read it. If there are attachments in the email, you can tap to open and view them if they are sup-ported by the application programs on the device.When viewing messages, you can tap Message and choose to perform the following operations:• New: Create a new email.• Reply: Reply to the sender.• Reply to all: Reply to all recipients.• Forward: Send the received email to other recipients.• Send attachment: Send the attachment of current email.• Find: Find a specific word in the email.• Find next: Find the word again.• Delete message: Delete current email.• Disconnect: Break the connection to your mailbox.You can also tap the From: field and select to perform the following actions:• Send Email: send an email to this address.• Send MMS: send an MMS message to this address.• Save contact: save this address as a new contact.ContactsWith the Contact application program, you can easily manage your contacts. In addition to just carrying and viewing these records, you can also quickly make phone calls, send messages/email and open web pages thanks to the integration with other application programs.9235874_3129_zh_tw_FCC.book Page 30 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs31Creating a New ContactCreating a New Contact from the Phone ScreenSee "Adding number to Contacts" on page 21 for more information.Creating a New Contact from the Contacts Screen1. In the Contacts screen, tap Contacts and select New.2. Tap Unfiled and select a folder where you want to place this contact.3. Enter contact information.Tip: You can specify a ringing tone for the contact by selecting a ringing tone from the Ringing tone drop-down menu. Note: The personalized ringing tone will only be played if your phone network is CLI (Calling Line Iden-tity) compatible, so the caller can be identified. Otherwise, the default ring tone will be used, regardless of your selec-tion of ringing tone.4. (Optional) Tap the tab to enter your note for this con-tact.5. (Optional) Tap the tab to specify a picture for this con-tact. Tap the icon to open a box where you can browse and select a picture.Note: To prevent failure when recording the voice tag, it is recommended that you do so in a quiet location.7. Tap the button to save the contact.Importing Contacts from a SIM Card1. Make sure that the SIM card is installed on your device.2. In the Contact screen, tap All and select SIM card.3. Tap Edit and select Copy all to contacts.4. In the box that follows, tap the Yes button.Exporting Contacts to a SIM Card1. Make sure that the SIM card is installed on your device.2. In the Contacts screen, tap to select a folder that contains the contact you want to export.3. Tap to open the contact from the list.4. Tap Edit and select Copy to SIM card.Viewing ContactsThe Contact screen displays all contacts on your device. You can also tap a tab below to view only the contacts that begin with the letters on the tab.To view the detail information of a contact, tap a contact on the screen.9235874_3129_zh_tw_FCC.book Page 31 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs32You ca n :• Tap the icon, icon or the phone number to make a call to the person.• Tap the icon or the mail address to start composing a new email for the person.Note: E-mail messages are automatically placed in Outbox before sending. If sending does not succeed, the e-mail is left in the Outbox.• Tap the icon or the web address to open the web page in the Internet application program.Managing Contacts Folders1. In the Contacts screen, tap All and select Edit folders.2. You can:• Tap the Add button to create a new folder. You will then be asked to enter a name for the new folder. When finished, tap the Done button.• Tap to select a folder on the list and then tap the Delete but-ton to delete the selected folder.• Tap the Rename button to change the name of the selected folder. Make changes and then tap the Done button.Managing ContactsFinding a Contact1. In the Contacts screen, tap Contacts and select Find.2. Enter the search keyword and specify where in Contacts will be searched (in all fields or in Names & Company).3. Tap the Find button.4. The contacts that match your search keyword will appear on the screen. You can tap to select and open a contact.Editing a Contact1. Open a contact.2. Tap Edit and select Edit contact.3. Make changes to the contact information.4. Tap the button.Deleting a ContactMethod 11. Open a contact.2. Tap Contacts and select Delete contact.Method 21. In the Contacts screen, tap Contacts and select Contacts manager.2. Tap to select a folder that contains the contact you want to edit from the Folder drop-down list.3. In the box below, tap to check the contact(s) you want to edit. You can also tap the Select all check box to select all contacts in the selected folder.4. Tap the Delete button, and then the Yes button in the box that follows.9235874_3129_zh_tw_FCC.book Page 32 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs335. Tap the Done button.Copying Contacts1. Open a contact.2. Tap Edit and select Copy contact.Pasting ContactsIn the Contacts screen, tap Edit and select Paste contact.Moving Contacts to a Different Folder1. In the Contacts screen, tap Contacts and select Contacts manager.2. Tap to select a folder that contains the contact you want to move from the Folder drop-down list.3. Tap to check the contact(s) you want to move. You can also tap the Select all check box to select all contacts in the selected folder.4. Tap the Move button, and then tap to select the folder where the contact(s) will be moved in the Folder drop-down list in the box that follows.5. You can tap the Folder button if you wish to create a new folder. Then tap the Move button.Sending ContactsSending a Contact1. Open a contact.2. Tap Contacts and select Send as.3. Select from the following and then tap the Done button:• MMS: Send the contact to another mobile phone as an MMS attachment. The MMS message screen will follow for you to compose the message.• Message: Send the contact to another compatible mobile phone via an SMS message. Enter the number of the recipi-ent and then tap the Send button.• Bluetooth: Send the contact to other devices that support Bluetooth technology. A box will appear showing found paired devices. Tap to select a device and then tap the Send button.• Infrared: Send the contact to other devices that support infrared connection. Align the infrared port of your device with that of the other device and then tap the Send button.Sending Multiple Contacts1. In the Contacts screen, tap Contacts and select Contacts manager.2. Tap to select a folder that contains the contacts you want to edit from the Folder drop-down list.3. Tap to check the contact(s) you want to send. You can also tap the Select all check box to select all contacts in the selected folder.4. Tap the Send button.5. Perform the same operation as described in step 3 in "Send-ing a Contact" on page 33.Sending All Contacts in a Folder1. In the Contacts screen, tap All and select a folder.2. Tap Contacts and select Send this folder.9235874_3129_zh_tw_FCC.book Page 33 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs343. Perform the same operation as described in step 3 in "Send-ing a Contact" on page 33.Owner CardThe owner card is your electronic name card. Once created, you can exchange it freely with other people.Creating Your Owner CardMethod 11. In the Contacts screen, tap Contacts and select New.2. Enter your personal data.3. Tap Contacts and select Set as owner card.4. Tap the button.Method 21. Open a contact.2. Tap Contacts and select Set as owner card.Sending Owner Card1. In the Contacts screen, tap Contact and select Send owner card.2. Perform the same operation as described in step 3 in "Send-ing a Contact" on page 33.Editing Owner Card1. In the Contacts screen, tap Contacts and select View owner card.2. Perform the same operation as described in "Editing a Con-tact" on page 32.Contacts Preferences1. In the Contacts screen, tap Edit and select Preferences.2. In the box that follows, tap to select a method by which the Contacts application program sorts your contacts.3. If you want the preferred phone number to appear next to the contact name when viewing, tap the Show preferred phone number check box. If this option is selected and no preferred number is specified, the first phone number in the contact will be used as the preferred number.4. Tap the Done button.Specifying Preferred Phone Number for Contacts1. Open a contact.2. Tap Edit and then select Edit contact.3. Edit the contact information.4. Tap Edit and then select Show in list.5. Tap to select a preferred number from the drop-down menu.6. Tap the Done button.CalendarTo open the Calendar application program, tap the Calendar icon in the Main screen.9235874_3129_zh_tw_FCC.book Page 34 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs35Creating New Calendar EntriesTo create a new Calendar entry:1. In the Calendar screen, tap Calendar and select New.2. Tap Unfiled and select a folder where you want to store the new entry.3. Enter the description of the entry and other necessary information.4. Tap to switch to the note page to write down your note for this entry (optional).5. Tap the button to save the entry.Calendar ViewsThe Calendar screen provides different views:Managing Calendar EntriesFinding an EntryTo find a specific Calendar entry:• Tap to change to Day view. Calendar entries appear as vertical bars. In Day view, tap a button on the bar to go to a specific day in the week.• Tap to change to Week view. Calendar entries appear as vertical bars. In Week view, tap or to go to the previous or next week.• Tap to change to Month view. Calendar entries appear as squares. In Month view, tap or to go to the previous or next month.9235874_3129_zh_tw_FCC.book Page 35 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs361. In the Calendar screen, tap Calendar and select Find.2. Enter the keyword and select Everywhere, Future or Past to select where to search.3. Tap the Find button.4. The entries that match your search keyword will appear on the screen. You can tap to select and open an entry.Editing an Entry1. Open a Calendar entry by tapping it in different views.2. Make changes to the entry.3. Tap the button to save your changes.Deleting an Entry1. Open a Calendar entry by tapping it in different views.2. Tap Calendar and select Delete entry.Deleting Entries in a Period of Time1. When in Calendar screen, tap Calendar and select Remove entries.2. Tap to select a removal range and then tap the Done button.Moving a Calendar entry to the To-do Application Program1. Open a Calendar entry by tapping it in different views.2. Tap Calendar and select Move to To-do.3. Tap the Ye s button. The entry will appear in the To-do appli-cation program.4. Tap the button to save your changes.Cutting, Copying or Pasting a Calendar Entry to the To-do Application Program1. Open a Calendar entry by tapping it in different views.2. Tap Edit and select Cut entry or Copy entry.3. Open the To-do application program.4. Tap Edit and then select Paste entry.Managing Calendar Folders1. In the Calendar screen, tap All and select Edit folders.2. You can:• Tap the Add button to create a new folder. You will then be asked to enter a name and specify a color for the entries that belong to the new folder. When finished, tap the Done but-ton.• Tap to select a folder in the list and then tap the Delete button to delete the selected folder.• Tap the Edit button to edit selected folder. Make changes and then tap the Done button.Setting up Calendar PreferencesTo access Calendar preferences:9235874_3129_zh_tw_FCC.book Page 36 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs371. In the Calendar screen, tap Edit and select Preferences.2. The Calendar preferences window will appear. Set up the options on the General and Alarm tabs.3. Tap the Done button.NoteWith the Note application program you can quickly and easily jot down notes, whether in typed letters or freehand drawing. You can also easily exchange them by sending them to different devices.Creating NotesMethod 11. In the Note screen, tap Note and select New.2. Tap Unfiled and select a folder where you want to place the new note.3. Enter the body of your note. You can tap the button to get bold text, and the button to start a bullet list.4. Tap to switch to the drawing tab for making a free-hand drawing. When drawing, tap the button to change stroke color, the button to change stroke thick-ness, or the button to activate the eraser.5. Tap the button to save the note.Method 21. Copy text from other application programs.2. In the Note screen, tap Edit and select Paste.Managing NotesEditing Notes1. Tap to open a note on the Note screen.2. Make changes to the note.3. Tap the button to save the note.Deleting Notes1. Open a note on the Note screen.2. Tap Note and select Delete note.Sending Notes1. Open a note on the Note screen.2. Tap Note and select Send as.3. Select from the following and then tap the Done button:• Bluetooth: Send the note to other devices that support Blue-tooth technology. A box will appear showing found paired devices. Tap to select a device and then tap the Send button.• Message: Send the note to another mobile phone via an SMS message. Enter the number of the recipient and then tap the Send button.9235874_3129_zh_tw_FCC.book Page 37 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs38• MMS: Send the note to another mobile phone as an MMS attachment. The MMS message screen will follow for you to compose the message.• Infrared: Send the note to other devices that support infrared connection. Align the infrared port of your device with that of the device and then tap the Send button.Managing Note Folders1. In the Note screen, tap All and select Edit folders.2. You can:• Tap the Add button to create a new folder. You will then be asked to enter a name for the new folder. When finished, tap the Done button.• Tap to select a folder on the list and then tap the Delete but-ton to delete the selected folder.• Tap the Edit button to edit the selected folder. Make changes and then tap the Done button.SettingsSettings is a list of all settings sorted into groups. By adjusting these settings, you can control the behavior of your device. To go to the Settings screen, tap the icon.Device SettingsBack LightYou can the back light to be Automatic, On, or Off. Choose from the drop-down list and tap the OK button.Auto power on/offYou can set the device to be powered on or off automatically.InternationalUse these settings to set your current location as well as the currency, distance and number formats for use in other application programs. You can access these settings on two different tabs: Location and Numbers. Select appropriate settings from the drop-down menus and then tap the Done button.PreferencesYou can set the shortcuts to your preferred features in the Main screen, and set the hot keys to specific functions. When finished setting, tap the Done button.Screen saverYou can enable or disable the screen saver and choose the screen saver.9235874_3129_zh_tw_FCC.book Page 38 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs39Date & TimeAdjusting the date and time here sets these throughout your device.Adjusting Time and Date1. In the Date & Time tab, tap the Date box. A calendar will appear on the screen.2. Tap to select current date from the calendar.3. Tap the Time box and adjust current time. Tap the upper part of the boxes that enclose the hour and minute to increase the numbers, or the lower part of the boxes to decrease them.4. Tap Daylight-saving if you want to use this feature. Select the daylight-saving zone(s) from the dialog that appears and then tap the Done button.5. Tap the Done button.Changing Date FormatYou can customize the display of times and dates throughout your device on the Format tab.Specifying WorkdaysIn the Wo r kdays tab, you can specify the days of the week that you normally work. You can set alarms in the Time application program that only sound on a workday. Specifying the first day of your week customizes the display of both Week and Month views in the Agenda application program.Text inputThere are two ways of entering text into your device:• The smARTwriter handwriting recognition system: your pen strokes on the screen are converted to individual letters, numbers, or other characters.• The virtual keyboard: you can "type" text by tapping the "keys."The method that you select here is enabled automatically when you need to enter text into your device. If you load other text input software, select it and adjust its settings here.Setting up smARTwriterYou can change the setting of the smARTwriter handwriting recognition system according to your writing habits. That is, you can “train” smARTwriter to improve the accuracy of recognition.1. In the Text input setup box, select smARTwriter from the Primary input method drop-down menu and then tap Setup.2. Configure the following options:• Line color: for selecting the color of pen strokes on the screen.• Line thickness: for selecting the thickness of pen strokes on the screen.• Timeout: for specifying the time between you finish writing and smARTwriter starts recognizing.• Add space: check this check box if you want smARTwriter to automatically add a space after each word.• Personalize: tap this button to open the Personalize screen that contains two tabs: the Personalize tab and the Browse tab.9235874_3129_zh_tw_FCC.book Page 39 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs40Creating Personalized Writing Models1. In the Personalize tab, select a character set and character from the Set and Character drop-down menus.2. Write the character in your own way in the Write a box.3. Tap Save.In the Browse tab you can browse the preset handwriting models.SystemSounds SettingAllows you to change the settings of warning tone, button click sound, and screen tap sound.User profilesYou can personalize how your device looks and sounds by configuring and applying user profiles. A user profile is a combination of user settings, including sound settings, display theme settings and appearance settings. You can also set up different profiles for use in different occasions.To customize a user profile:1. Tap to select a profile from the Profiles drop-down menu.2. Specify the settings by selecting options in drop-down menus.Tip: You can tap the icon to listen to the sound.Welcome MessageYou can enable the welcome message by checking the check box. And you can input your customized message in the dialog frame, and change colors and font types (italic, underline, bold).LanguageSelects the system language on your device. To do so, tap to select a language and then tap Done. The device is rebooted automatically for the change to take effect.Depending on the region-specific configuration, you may also delete some user-installed languages to conserve memory space. To do so, tap to select a language and then tap Delete.BannerYou can enable the personal banner by checking the check box. And you can input your customized greetings in the dialog frame.By enabling the user greeting; next time when you turn on your device, your customized banner will pop up.Connection SettingsUSB cableYou can use this option to set up the cable connection mode between the device and PC.9235874_3129_zh_tw_FCC.book Page 40 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs41• PC Connect: select this item before connecting the device to your PC and using the PC Sync to perform synchronization and backup/restore.• Modem: select this item before connecting the device to your PC and use the device as a modem.InfraredSee "Infrared Connection" on page 82.BluetoothSee "Bluetooth Connection" on page 82.Network SettingsImportant: Use only services that you trust and that offer adequate security and protection against harmful software.GSM networksLike any mobile phone, your device connects to a “network”, which is the path that carries your phone calls, messages, web pages, and emails. The device is designed to use with the GSM and GPRS networks.When you make a phone call, your device uses GSM. When you connect to the Internet, your device uses either GSM or GPRS depending on the type of Internet account that you select. Dial-up and high-speed dial-up Internet accounts connect to the GSM network. GPRS Internet accounts connect to the GPRS network.When you send or receive SMS messages, your device can use either GPRS or GSM, and, if there is no coverage with one network, it can automatically switch to the other.The GSM networks setting enables you to select an appropriate network manually if you want to change the network you are connected to, and set up a preferred list of networks. The network and band selections must be supported by your network service provider.Changing Network Search ModeTap the Search mode tab and select Automatic or Manual. If Manual is selected, the device will list all of the networks found for you to choose from.Selecting Another NetworkTap the Search mode tab and select Manual. The device will scan all available networks and show them in a dialog box for you to choose from.Note: Not all of the networks listed may be available to you. Please refer to your network service provider for further details.Creating a Preferred Network List1. Tap the Preferred list tab and then the Add network button.2. Tap to select a network from the list.3. Select a position (priority) of the network in the preferred network list.9235874_3129_zh_tw_FCC.book Page 41 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs424. Tap Done.Note: Please consult your network service provider for availability and further details about the preferred network list function.Internet accountsWith access to the Internet you can use email and connect to the web. You can create 2 types of Internet accounts depending on your ISP and the type of network you have access to:• Dial-up account: this is indicated by the icon. With a dial-up account, you are charged for the length of time that you're connected to the Internet.• GPRS account: this is indicated by the icon. With a GPRS account, you are charged for the amount of information you view, download, or send when you're connected to the Inter-net. GPRS accounts have -GPRS appended to their name.Creating New Internet AccountsYou can manually set up the Internet account, or ask your service provider to send you a message that contains the required setup information and creates the account automatically on your device.To manually set up an Internet account:1. Tap New on the Accounts tab.2. Enter the name of the connection in the Account name field.3. Select a connection type from the Connection type drop-down menu.4. Set up the settings according to the data from your network service provider.5. Tap Done.Editing Internet Accounts1. In the Accounts tab, tap to select an account.2. Tap Edit.3. Edit the settings of the selected account.4. Tap Done.Deleting Internet Accounts1. In the Accounts tab, tap to select an account.2. Tap Delete, and then Yes.Wap accountsWAP account settings are essential for using Internet connections and MMS service via a WAP gateway. You can manually set up the WAP account, or ask your service provider to send you a message that contains the required setup information and creates the account automatically on your device.To manually set up a WAP account:1. Tap New on the Basic tab.2. Enter the name of the connection in the Account name field.3. Select an Internet connection from the Internet account drop-down menu. Before you tap the User Proxy check box, have the following data ready from your network service provider:Address: ____________________9235874_3129_zh_tw_FCC.book Page 42 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs43Port: _______________________Username: __________________Password: ___________________4. Set up the settings according to the data from your network service provider.5. Tap the Preferred tab and tap to check the Use WAP account check box.6. Select a preferred WAP account for Internet connection and MMS delivery from the Preferred drop-down menu.7. Tap Done.Editing WAP Accounts1. In the Basic tab, tap to select an account.2. Tap Edit.3. Edit the settings of the selected account.4. Tap Done.Deleting Internet Accounts1. In the Basic tab, tap to select an account.2. Tap Delete, then Yes .OfflineThe Offline mode is used where mobile phones and Bluetooth wireless functions are not allowed. To immediately activate the Offline mode, tap the Offline now button.You can also check or uncheck the check box in the dialog to determine if you want the device to prompt you with the Power menu when you press the power key. Messaging accountsMessaging accounts contain various settings for using email, SMS, MMS and Cell Broadcast services. These accounts must be properly set up before the services can be used.Cell Broadcast messages are the general messages that your network service provider broadcasts to all subscribers in a particular area. These messages are broadcast in numbered channels. For example, channel 30 might be for local weather, 60 for traffic reports, 80 for information of local hospitals, taxis, or pharmacies.Note: Please contact your operator for a list of avail-able channels and the information they provide.Manually Set up Messaging Accounts1. Have the account data ready from your network service provider.2. Set up the settings on each tab according to the data.3. Tap Done.Email account dataSMS account data• SMS Service centre address: ______________________• Character set: 7bit UCS2• Message stored for: 1 hour 6 hours 1 day 7 days Maximum• Connection type: GPRS only GSM only• Delivery report9235874_3129_zh_tw_FCC.book Page 43 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs44• Use reply pathMMS account data• Account Name: ______________________• MMS Gateway: ______________________• Messages valid for: 1 hour 6 hours 1 day 7 days Maximum• Transport: WAP HTTP• Internet account (Only available when HTTP is selected in Transport): (Select an Internet account for use with MMS transmission).• WAP account (Only available when WAP is selected in Trans-port): (Select a WAP account for use with MMS transmis-sion).Cell Broadcasting Message setting1. Tap the Enable cell broadcast check box on the CBM tab to enable the reception of Cell Broadcasting messages.2. Tap New and select a channel from the dialog box that appears, and then tap OK.3. To delete a channel, tap a channel and tap Delete, Ye s .Security SettingsIP Security managerThe IP security manager displays stored policies and only one policy can be activated at a time. There are two types of passwords needed:• IP security password: is to be set when installing the very first policy, i.e. this password is only set once, but it is possible to change it later at any time by tapping Password button.• Import password: is needed when installing a policy and the supplier of the policy gives this.WIM PIN settingsWIM is used for performing security functions, especially to store and process information needed for user identification and authentication. I.e. it's a tamper-resistant store for private keys, certificates and other objects that may require a PIN for access or modification.You can select a PIN from the PIN choice list. The WIM objects list changes content dynamically, displaying only the keys that are protected by the selected PIN and also have an associated certificate. Other keys that are protected by the selected PIN but don't have an associated certificate are not shown in the WIM object list.You can change status of a PIN:• Enable PIN: A PIN code that is enabled is requested for authorization of an operation. To proceed with the operation you must enter the PIN code. • Disable PIN: A PIN code that is disabled is not requested to authoress an operation to proceed. You can change the PIN code:• Select the PIN you want to change and tap Change PIN. • If a PIN code has been blocked, you must unblock it before it can be used again. Select the PIN you want to change and tap Change PIN.9235874_3129_zh_tw_FCC.book Page 44 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs45Tip: For information on how to unblock the PIN, please consult your network service provider.PasswordSets the password of your device. Choose to never use the password or to be asked to enter the password whenever the device is powered on. You can edit the owner information as well.General SettingsStorage ManagerWith Storage manager you can do the following:Managing files1. In the Storage manager screen, tap File.2. Select from the Location and Ty p e drop-down menus to locate the files in the File box below.3. Tap the check box beside each file to select the file. You can select multiple files.4. Tap Copy to copy the selected file to another location, or Delete to delete the file from memory.Uninstalling programs1. In the Storage manager screen, tap Uninstall.2. Tap to select a program you want to remove from the device and then tap Uninstall.PowerAllows you to change the auto power save setting.By default, your device will display the screensaver if there is no key or touch screen operation for 2 minutes. If you set Auto power save to be 3 minutes, 1 minute after the screensaver is displayed, the device will enter auto power save mode automatically.In auto power save mode, the device can be waken automatically by an incoming call. You can also wake the device up by pressing the power key. Master resetUse Master reset only if you want to reset all the settings on your device to the way they were after initial setup. If you want to keep installed application programs, uncheck the Delete user installed applications check box.Warning: All user data, as well as pre-installed media files and application program data files will be deleted and all settings will be set to the state they were, when the device was originally delivered.Format diskWhen you format a disk, you delete all the information on it, including any application programs that you've installed.Any memory card that you install on your device are also displayed.9235874_3129_zh_tw_FCC.book Page 45 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs46Renaming a DiskYou can rename a disk to give it a more meaningful name.1. Tap to select a disk you want to rename from the Disk drop-down menu and then tap Rename.2. Enter the new name and then tap Done.Formatting a DiskYou can use this function to format a newly purchased memory card for use with the device, or delete all data on the card at once. To format a disk:1. Tap to select a disk you want to format from the Disk drop-down menu and then tap Format.2. Tap Ye s .3. The formatting progress starts. Wait until the formatting is carried out completely.Important: When formatting a memory card, do not remove it during the process, otherwise the card or data will be damaged.Brightness & AlignmentAllows you to change the brightness and calibrate the touch screen.Setting Brightness1.To adjust brightness of the display, drag the slider to the left or right.2. Tap Done.Adjusting Alignment1. Tap Alignment tab in Brightness & Alignment.2. Follow the on-screen instructions.3. Tap YES to accept the new settings.Certificate ManagerDigital certificates ensure that the web or WAP pages you visit, or any software you install, really are created by the person you expect.Certificates may be presented on the pages that you view or the software that you download. Your device compares these certificates with a set of certificates that's stored in Certificate manager to ensure the authenticity of the page or software. If the certificates don't match, your device informs you, and allows you to:• Prevent the page being loaded or the software being installed, or• Continue at your own riskImportant: Even if the use of certificates makes the risks involved in remote connections and software installa-tion considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certifi-cate manager must contain correct, authentic, or trusted certificates for increased security to be available. If Expired certificate or Certificate not valid yet is shown even if the certificate should be valid, check that the current date and time in your device are correct.9235874_3129_zh_tw_FCC.book Page 46 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs47Security InformationSecurity information is displayed when Certificate manager can't be sure of the origin of the page or software. For example, security information will be displayed if:• The certificate on a page has expired• The identity of a software manufacturer can't be verifiedSecurity information is also displayed when a certificate on your device:• Has expired• Has been revoked by the independent organization that issued itAdding and Removing CertificatesYour device handles certificates automatically so, most of the time, you can browse the Internet without using Certificate manager. If you do need to add or remove a cer tificate, you will usually be informed by your network operator or system administrator. You should remove a certificate from Certificate manager if you are informed, or suspect, that the certificate:• Does not belong to the person who supplied it• Was issued incorrectly by the independent organization that created itType of CertificateThe type can be either User or Certificate Authority. • User certificate contains your identity. This type of certifi-cate is used when the server asks for client authentication. The client application program requests you to identify yourself by choosing a user certificate.• Certificate Authority certificates contain server details. This type of certificate is handled by your device when the server only requires server authentication. This means that your identity remains anonymous.VoiceCommander SettingAllows you to configure VoiceCommander settings.LocksUsing this feature, you can prevent unauthorized persons from using your phone to make or receive phone calls. You can enable/disable the SIM card lock function and change the SIM card PIN with this setting option.• To enable or disable SIM card lock, tap to select At power on or Off. If the SIM card lock is enabled, you will be prompted to enter the PIN before entering the online mode of the device.• To change SIM card PIN, tap the Change Codes tab and then tap the Change SIM card PIN or Change SIM card PIN2 button.• Tap Done to exit.Call settingsNote: If the SIM card is not installed, certain setting items will not appear on the screen.Accepted CallersAccepted callers are those whose calls can reach you. Others will be automatically rejected.9235874_3129_zh_tw_FCC.book Page 47 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs481. Select from the following options in the Accept calls from drop-down menu:• All callers: Everyone can call you.• All except listed callers: Everyone can call you except the ones in the rejected caller list. Tap the Add new button to add call-ers to the list.• None: No one can call you.• 2. Tap Done to exit.Add to ContactsIf this function is activated, after a call has ended, if the phone number is not already stored in the Contacts application program, you will be asked if you want to add it.1. Tap the Add party to contacts drop-down menu and select On. To deactivate this function, tap Off.2. Tap Done.Auto redialIf an outgoing call is failed to connect to the network, you can choose to redial the number automatically or to be prompted to make the call again.1. Tap Off, Auto redial, or Prompt redial in the drop-down list to set Auto redial.2. Tap Done to exit.Call CostsThe call costs function allows you to set a limit for total call costs. If call costs exceed this limit, the device will no longer be able to dial pay calls.To set up call costs:1. Enter the price unit for calculating call cost in the Price per unit field. The value must be between 0.01 and 9999999.2. Enter the 3-character name of currency in the Currency field.3. Select a Credit status: Limited or Unlimited.4. Enter a credit limit in the Remaining credit field. The value must be between 0.01 and 9999999.5. Tap Done.6. Enter your PIN 2 code and then tap Done.Note: The PIN2 is the second PIN code. Its main use is in controlling restricted services. For example, call time limits and restricted phone numbers. • If the PIN2 code is incorrectly entered three times consecu-tively, it will be locked. To unlock it, you will need to enter the PUK2 code, which you obtain from your network oper-ator.If the Credit status is set to Limited and there is only 30 seconds of credit left, the message "Low credit" will appear on the screen. If “Credit expired” appears, you can not make any chargeable calls.Note: For the availability and more information about the Call meter function, please consult your network ser-vice provider.Call WaitingIf there is an incoming call when you are in the middle of another call and the call waiting function is enabled, the screen 9235874_3129_zh_tw_FCC.book Page 48 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs49will display the number (if available) of the incoming call and call waiting message to alert you.1. After Call waiting is selected, the device will inquire the sta-tus of your call waiting setting. This will take a few seconds.2. Select from the following options:• On: Enable call waiting.• Off: Disable call waiting.3. Tap Done to exit.Calling CardsYou can use this option to set up the device for use with your calling cards.1. Tap the New button to add a new calling card.2. Enter necessary information and then tap the Done button.3. Tap Calling card mode to select from Off, Prompt before call or Always use calling card. If you have multiple calling cards, select one from the Calling cards box first.4. Tap the Done button.To delete a calling card, tap to select one in the Calling cards box and then tap the Delete button.To edit a calling card, tap to select one in the Calling cards box and then tap the Edit button.Connection alertWhen the connection alert function is activated, you will be informed when a successful phone connection is made.1. Select from the Select connection alert drop-down list. The available options are Off, Vibrate, Ring, and Flash.2. Tap Done.Divert calls1. After Divert call is selected, the device will inquire the sta-tus of your call waiting setting. This will take a few seconds.2. According to the call type you want to setup, tap the Vo i c e or Data & Fax tab.3. Tap to select a divert condition (for example, When busy divert to:) and then select from the following options:• Voi ce mail: divert the call to your voice mail-box.• Lookup in contacts: pick a number from your contacts.• Enter number: enter the number directly.• Off: cancel diverting calls.4. Tap the Done button to exit.HandsfreeWith this function you can setup the way your device works with the handsfree kit. Tap to select an option:Options for Answering Mode• Normal: answer the call as normal.• Any key: the incoming call will be answered automatically after any key is pressed.• After 5 seconds: the incoming call will be answered automat-ically after 5 seconds.Tip! You can press and hold the button on the control-ler of the handsfree to answer and end calls.Options for Bluetooth: Preferred sound device• Phone: use the keys on the device to manage calls.9235874_3129_zh_tw_FCC.book Page 49 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs50• Headset: use the keys on the device or the headset to manage calls. If a Bluetooth headset is used, please choose Headset as the preferred device.• Handsfree: use the keys on the device or the handsfree (Blue-tooth car kit) to manage calls. If a Bluetooth car kit is used, please choose Handsfree as the preferred device.Incoming Call PictureIf the incoming caller has a picture stored in the Contact application program, the picture will appear on the screen when his/her call is received.Tap to check or uncheck the Show large pop-up picture for incoming calls check box. If checked, the picture will be shown.Restrict CallsYou can request your network service provider to block the dialing or receiving of certain calls. The call barring services require the support of your network. To activate or cancel any of the options, you must enter the network password provided by the network service provider.1. After Restrict calls is selected, the device will inquire the sta-tus of your current setting. This will take a few seconds.2. According to the call type you want to setup, tap the Voice or Data & Fax tab.3. Tap to select a divert condition (for example, When busy divert to:) and then select from the following options:• On: enable call restriction.• Off: disable call restriction.4. Tap the Done button. You will be asked to enter the restrict code. Enter the code and tap the Done button.5. To change the restrict code, tap the Change password button.Voice MailYou must enter the voice mail-box number here before you can access your voice mail. The voice mail-box number is available from your network service provider.Enter your voice mail-box number and then tap the Done button.CameraWith the built-in camera and the Camera application program, you can take still pictures, capture video clips for viewing on the device or sharing them with your friends or family by sending them via MMS messages or transferring them to PC.Taking Still Pictures1. Press and hold the Camera key for 2 seconds. The Camera application program will open automatically.2. Preview the image using the viewfinder. You can also tap the + (or press the key) or - button on the screen (or press the key) to zoom in or out on the object.3. Tap the icon to set your desired Camera settings. 4. Press the Camera key and the still image will be captured and saved.9235874_3129_zh_tw_FCC.book Page 50 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs51Note: When the image is being saved, the buttons on the screen will become unavailable temporarily. • When the Camera key is pressed while taking a picture, a shutter sound will be generated, even if you have put the device in Silent mode. 5. The picture you just took will appear in the viewfinder.Yo u c a n :• Tap the button to delete the picture.• Tap the button to send the picture. Select from the following and then tap the Done button:• MMS: send the picture to another mobile phone as an MMS attachment. The MMS message screen will follow for you to compose the message.Note: Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device.• Bluetooth: send the picture to other devices that support Bluetooth technology. A box will appear showing found paired devices. Tap to select a device and then tap the Send button.• Infrared: send the picture to other devices that support infrared connection. Align the infrared port of your device with that of the other device and then tap the Send button.• Tap the button to rename the picture.• Tap the button to view the picture in the PhotoBase application program.• Tap the button to exit.Capturing Video1. Press the Camera key. The Camera application program will open automatically.2. Press the icon to go to video mode.3. Preview the image using the viewfinder. You can also tap the + (or press the key) or - button on the screen (or press the key) to zoom in or out on the object.Tip! It is recommended that you tap the + button once to zoom in on the image one level to get better video qual-ity.• Try to keep the distance between the sound source and the microphone of the device within about 10-15 cm distance when shooting video in order to obtain better sound recording quality.4. Tap the “Record” button or press the Camera key to start capturing video.5. When capturing is in progress, you can perform the follow-ing operations:• Tap the button to pause capturing. Tap the button again to resume capturing.9235874_3129_zh_tw_FCC.book Page 51 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs52• Tap the + button (or press the key) to zoom in on the image.• Tap the - button (or press the key) to zoom out on the image.• Tap the button or press the Camera key to stop captur-ing. The video clip will be saved.Note: When the video clip is being saved, the buttons on the screen will become unavailable temporarily. • Tap the button to exit without saving.6. Alternatively, you can perform the following operations after a video clip is captured:• Tap the button to delete the video clip.• Tap the button to send the video clip. Select from the fol-lowing and then tap the Done button:• MMS: Send the video clip to another compatible mobile phone as an MMS attachment. The MMS message screen will follow for you to compose the message.Note: Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device.• Bluetooth: Send the video clip to other devices that support Bluetooth technology. A box will appear showing found paired devices. Tap to select a device and then tap the Send button.• Infrared: Send the video clip to other devices that support infrared connection. Align the infrared port of your device with that of the other device and then tap the Send button.• Tap the button to rename the video clip.• Tap the button to play the video clip.• Tap the button to exit without saving.Camera Options When Taking Pictures and Capturing VideoPress to enter the option menu and setup images or video settings.Image SettingsWhen taking pictures, you can choose to set different camera settings for better effect. Tap the icon to set your desired camera settings and tap an item in the pop-up options menu to configure its corresponding settings.• Image size: Tap to select a suitable image size. Larger image size and higher image quality will result in larger picture files.• Night Mode: Tap to set the night mode on or off.• Effect: Tap to select different image effect such as Normal, Mono, Sepia, Blush and Negative.• Burst-Mode: Tap to set the burst-mode on or off. If you set the burst-mode on, there are three burst-mode for you to choose: 6 Multishot, 9 Multishot and 16 Multishot.9235874_3129_zh_tw_FCC.book Page 52 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs53Note: When the camera is set to be Burst-mode, to take a multishot, press and hold the Camera key.• Self-Timer: When taking pictures, you can enable the 10-second self-timer by setting Self timer on.• Anti-Shaking: Your device supports anti-shaking function when taking pictures. Tap this item to set this function on or off.• Settings: Tap to adjust different settings, such as Quality, White Balance, Exposure Area, Exposure Bracketing, and Anti-Flicker.• Memory Storage: Tap to select a default storage location (phone memory or SD memory), and filenames.• Help: Tap to view the camera help file.• About: Tap to see more information about the camera.Video SettingsWhen capturing video, you can choose to set different camera settings for better effect. Tap the icon to set your desired camera settings and tap an item in the pop-up options menu configure its corresponding settings.• Night Mode: Tap to set the night mode on or off.• Effect: Tap to select different image effect such as Normal, Mono, Sepia, Blush and Negative.• Settings: Tap to adjust settings of Audio Settings, Quality, White Balance, Exposure Area, Anti-Flicker, and Format.• Memory Storage: Tap to select a default storage location (phone memory or SD memory), filename and size mode (for displaying under the viewfinder when capturing video) for video clips.• Help: Tap to view the camera help file.• About: Tap to see more information about the camera.Note: When size mode is set to "MMS", the maxi-mum video size is 95KB.• When size mode is set to "Maximum available memory", all free memory space will be used for recording.• When size mode is set to "In seconds", the maximum length of video can be specified. (Max. 300 seconds)• When size mode is set to "In KB", the maximum size of video can be specified.Note: It is recommended that you save the images/video to the memory card to prevent phone memory from running low.Ta p Done to confirm your settings, or Default to reset all camera settings to default values. Tap Cancel to exit the camera settings screen.Note: It is recommended that when you finish using the Camera application program, tap Camera and select Exit to close it in order to save memory space.9235874_3129_zh_tw_FCC.book Page 53 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs54Music PlayerWith the Music player application program, you can play music tracks/files in the following formats:• AMR files (.amr)• MP3 files (.mp3)• WAV files (.wav)• MIDI files (.mid)Playing Music1. Tap the Music player application program icon in the Main screen.2. Tap All and select the location (folder) that contains the music files.3. The song list will appear in the screen.Tip! To sort songs on the song list, tap Thumbnails and then select Sort by name, Sort by date or Sort by size.Note: It is recommended that you save music files on the memory card to prevent phone memory from running low.• When copying music files to the device memory/memory card, put them in the folder named "audio" in the "Media files" folder. You can also create new sub-folders in the "audio" folder to store music files.Tap to check the songs you want to play in the song list and then tap the button (or press the key) to start playing them. Warning: Listen to music at a moderate level. Contin-uous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.Operations When Playing MusicWhen playing music, you can:• Tap the button to stop playing music.• Tap the button (or press the key) to pause playing current song. Tap the button again to resume normal playback.• Tap the button (or press the key) to go to the next song.• Tap the button (or press the key) to go to the previous song.• Tap the icon to enable random playback. Tap the icon again to disable it.• Tap the icon to enable repeat playback. Tap the icon again to disable it.9235874_3129_zh_tw_FCC.book Page 54 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs55Managing SongsRenaming Songs1. Tap the icon to open song list, and then tap a song to select it.2. Tap the button.3. Enter the new name for the song and then tap OK.Sending Songs1. Tap the icon to open song list, and then tap a song to select it. You can select multiple songs.2. Tap the button.3. Select from the following and then tap the Done button:• Email: send the song(s) as email attachments.• MMS: send the song(s) to another mobile phone as MMS attachments. The MMS message screen will follow for you to compose the message.• Bluetooth: send the song(s) to other devices that support Bluetooth technology. A box will appear showing found paired devices. Tap to select a device and then tap the Send button.• Infrared: send the song(s) to other devices that support infrared connection. Align the infrared port of your device with that of the device and then tap the Send button.Copying Songs1. Tap the icon to open song list, and then tap a song to select it.2. Tap the button.3. Tap to select a folder where the song will be copied from the Folder drop-down list.4. If necessary, change the name of the song by entering a new name in the Name field.5. Tap Save.6. Tap Copy.Moving Songs1. Tap the icon to open song list, and then tap a song to select it.2. Tap the button.3. Tap to select a folder where the song will be moved from the Folder drop-down list.4. If necessary, change the name of the song by entering a new name in the Name field.5. Tap Save.6. Tap OK.Deleting Songs1. Tap the icon to open song list, and then tap a song to select it.9235874_3129_zh_tw_FCC.book Page 55 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs562. Tap the button.3. Tap YES.Viewing Song Information1. Tap the icon to open song list, and then tap a song to select it.2. Tap the button.Managing Music Folders1. In the song list screen, tap All and select Edit Folders.2. You can:• Tap the Add button to create a new folder. Enter the name for the new folder and specify the storage location (phone stor-age or memory card) and then tap the Done button.• Tap to select a folder on the list and then tap the Delete but-ton to delete the selected folder.• Tap the Edit button to rename selected folder. Enter a new name and specify the storage location (phone storage or memory card) and then tap the Done button.Note: It is recommended that when you finish using the Music player application program, tap Music and select Exit to close it in order to save memory space.Video PlayerWith Video player, you can view video clips captured by the camera or transferred from other devices. The Video player application program accepts video clips in the MPEG 4, 3GP format.Viewing Video Clips Using Video Player1. Tap the Video player application program icon in the Main screen.2. Tap All and select a folder. You can select to view the video clips in the device memory, the memory card or both.3. The thumbnails and related time, date and length informa-tion of the video clip files will appear.4. Tap to select a video clip you want to play and then tap the button (or press the key). Video player will start playing the video clip.Note: When copying video files to the device memory/memory card, put them in the folder named "video" in the "Media files" folder. You can also create new sub-folders in the "video" folder to store video files.Options When Viewing Video ClipsWhen viewing video clips, you can:9235874_3129_zh_tw_FCC.book Page 56 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs57• Tap the button (or press the key) to pause the video image.• Tap the button (or press the key) to play the next video clip.• Tap the button (or press the key) to play the previous video clip.• Tap the button to stop playing the video and return to the file list screen.• Tap the icon to enable random playback. Tap the icon again to disable it.• Tap the icon to enable repeat playback. Tap the icon again to disable it.• Tap the icon to switch to the options of the slow-motion playback.Note: The sound is muted during the slow-motion playback.Managing Video Folders1. In the Video player screen, tap All and select Edit folders.2. You can:• Tap the Add button to create a new folder. Enter the name for the new folder and then tap the Done button.• Tap to select a folder on the list and then tap the Delete but-ton to delete the selected folder.• Tap the Edit button to rename selected folder. Enter a new name and then tap the Done button.Managing Video ClipsDeleting Video Clips1. Tap the icon to open video list.2. Tap to select the video clip you want to delete.3. Tap the button, and then tap Ye s .Renaming Video Clips1. Tap the icon to open video list.2. Tap to select the video clip you want to rename.3. Tap the button.4. Enter the new name in the dialog that appears and then tap OK.Sending Video Clips1. Tap the icon to open video list.2. Tap to select the video clip you want to send.3. Tap the button.4. Select from the following and then tap the Done button:9235874_3129_zh_tw_FCC.book Page 57 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs58• Bluetooth: send the video clip to other devices that support Bluetooth technology. A box will appear showing found paired devices. Tap to select a device and then tap the Send button.• MMS: send the video clip to another mobile phone as an MMS attachment. The MMS message screen will follow for you to compose the message.• Infrared: send the video clip to other devices that support infrared connection. Align the infrared port of your device with that of the device and then tap the Send button.Viewing Video Clip Information1. Tap the icon to open video list.2. Tap to select a video clip.3. Tap the button. The information about the video clip will appear on the screen.Tip! You can also tap Options and use the commands.Note: It is recommended that when you finish using the Video player application program, tap Video and select Exit to close it in order to save memory space.PhotoBasePhotoBase is a powerful image management application program that allows you to view, edit, organize pictures and add special effects to pictures taken by your camera or downloaded/transferred from other locations.Viewing Images1. Tap the PhotoBase application program icon in the Main screen.2. In the PhotoBase screen, tap All and select a folder.Note: When copying image files to the device memory/memory card, put them in the folder named "image" in the "Media files" folder. You can also create new sub-folders in the "image" folder to store image files.9235874_3129_zh_tw_FCC.book Page 58 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs593. The images in the selected folder will appear.• You can tap the button to view images as thumbnails, or the button to view images as a list.• Tap the button to view images as slideshows.• Tap Thumbnails or List and select Sort by name, Sort by date or Sort by size to sort images according to different condi-tions. 4. Tap a thumbnail or an item in the list to open the image. The image will appear in the image viewing screen.Image viewing optionsWhen viewing an image, you can:• Tap the button (or press the key) to go to the previous image.• Tap the button (or press the key) to go to the next image.• Tap the button to open the image editing screen for edit-ing current image.• Tap the button to open the image workshop screen for applying special effects to current image.9235874_3129_zh_tw_FCC.book Page 59 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs60• Tap the button to send the current image.• Tap the button to delete the current image.• Tap the button to enlarge or reduce the viewing size.• Tap the button to return to the thumbnail or list view.Organizing ImagesManaging Image Folders1. In the image thumbnail or list view, tap All and select Edit folders.2. You can:• Tap the Add button to create a new folder. You will then be asked to enter a name for the new folder. When finished, tap the Done button.• Tap to select a folder on the list and then tap the Delete but-ton to delete the selected folder.• Tap the Edit button to edit selected folder. Make changes and then tap the Done button.Copying Images to a Different Folder1. In the image thumbnail or list view, select images you want to copy by checking the check boxes on image thumbnails or next to image items.2. Tap PhotoBase and select Copy ticked picture(s) to.3. Select a folder from the drop-down list and then tap the Copy button.Deleting ImagesMethod 11. In the image thumbnail or list view, select images you want to delete by checking the check boxes on image thumbnails or next to image items.2. Tap PhotoBase and select Delete ticked picture(s).3. Tap the Ye s button.Method 21. Open an image from the thumbnail or list view.2. Tap the button on the image viewing screen.3. Tap the Ye s button.Sending Images1. Open an image from the thumbnail or list view.2. Tap the button on the image viewing screen.3. Select from the following and then tap the Done button:• Bluetooth: send the image to other devices that support Blue-tooth technology. A box will appear showing found paired devices. Tap to select a device and then tap the Send button.• MMS: send the image to another mobile phone as an MMS attachment. The MMS message screen will follow for you to compose the message.• Infrared: send the image to other devices that support infra-red connection. Align the infrared port of your device with that of the device and then tap the Send button.9235874_3129_zh_tw_FCC.book Page 60 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs61Editing ImagesRotating Images1. Open an image from the thumbnail or list view.2. Tap the button to open the image editing screen.3. Tap the button to rotate the image 90 degrees clock-wise, or the button to rotate the image 90 degrees counter-clockwise.4. Tap the button and then tap Yes to save your changes.Flipping Images1. Open an image from the thumbnail or list view.2. Tap the button to open the image editing screen.3. Tap the button to flip the image horizontally, or the button to flip the image vertically.4. Tap the button and then tap Yes to save your changes.Cropping Images1. Open an image from the thumbnail or list view.2. Tap the button to open the image editing screen.3. Tap the button and then tap Continue in the box that appears.4. Use the stylus to draw a cropping frame that encompasses the area you want to crop from the original image.5. If necessary, tap the crossed arrow at the center of the frame to adjust its position on the original image. You can also tap the small red dots at each corner of the frame to adjust its size.6. Tap the button. The image will be cropped.7. Tap the button and then tap Ye s to save your changes.9235874_3129_zh_tw_FCC.book Page 61 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs62Adding Special Effects to images Adding Text to Images1. Open an image from the thumbnail or list view.2. Tap the button to open the image workshop screen.3. Tap Add text.4. Enter the text you want to add to the image and then tap OK. 5. You will see a text frame on the image with the text you just entered in it. If necessary, tap and drag the crossed arrow mark at the center of the text frame to adjust its position on the image, or tap and drag the small red dots at each corner of the text frame to adjust its size.6. If necessary, you can tap the button to change text color, or the button to change text size. You can also tap the button to add more text or edit the text in the text frame.7. Tap the button and then tap Yes to save your changes.Adding Clipart to Images1. Open an image from the thumbnail or list view.9235874_3129_zh_tw_FCC.book Page 62 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs632. Tap the button to open the image workshop screen.3. Tap Add clipart.4. Tap Emotions and select a clipart category. 5. Tap to select a clipart image. The clipart image will appear on the original image.6. If necessary, you can also do the following:• Tap the button to add more clipart images to the origi-nal image.• Delete a clipart image by tapping it on the original image and then tap the button.• Adjust the position of the clipart image by tapping it on the original image, tapping the button and then tap and drag the clipart image.• Adjust the size of the clipart image by tapping it on the orig-inal image, tapping the button and then tap and drag the clipart image.• Rotate the clipart image by tapping it on the original image, tapping the button and then tap and drag the clipart image.7. Tap the button and then tap Ye s to save your changes.Adding Frames1. Open an image from the thumbnail or list view.2. Tap the button to open the image workshop screen.3. Tap Fun house.4. Tap Bobble_heads and select a frame type. 9235874_3129_zh_tw_FCC.book Page 63 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs645. Tap to select a frame. The frame will appear on the original image.6. If necessary, you can also do the following:• Adjust the position of the original image by tapping the button and then tap and drag the original image.• Adjust the size of the original image by tapping the but-ton and then tap and drag the dotted border of the original image.• Rotate the original image by tapping the button and then tap and drag the original image.• Flip the original image vertically by tapping the button.7. Tap the button and then tap Yes to save your changes.Using Greeting Card Templates1. Open an image from the thumbnail or list view.2. Tap the button to open the image workshop screen.3. Tap Greeting.4. Tap to select a template type. 5. Tap to select a template. The template will appear on the original image.6. If necessary, you can also do the following:• Adjust the position of the original image by tapping the button and then tap and drag the original image.• Adjust the size of the original image by tapping the but-ton and then tap and drag the dotted border of the original image.• Rotate the original image by tapping the button and then tap and drag the original image.• Flip the original image vertically by tapping the button.7. Tap the button and then tap Yes to save your changes.Adding Warping Effects1. Open an image from the thumbnail or list view.2. Tap the button to open the image workshop screen.9235874_3129_zh_tw_FCC.book Page 64 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs653. Tap War pin g.4. Tap War p and select a pen size for warping: Large pen, Medium pen or Small pen.5. Tap and drag the portions you want to create warping effect on the original image. To clear all changes, tap Warp and then select Undo all changes.6. Tap the button and then tap Yes to save your changes.Note: It is recommended that when you finish using the Photo Base application program, tap PhotoBase and select Exit PhotoBase to close it in order to save memory space.InternetThe Internet browser allows you to view information on the Wor ld Wid e Web or on WAP pag e s. You c an a lso bo okmar k your favorite pages or save them for off-line viewing.Before you can use Internet, you need to set up an Internet account in Settings. If you intend to use certain WAP services, it might also be necessary to set up a WAP account in Settings.Note: Proxy settings for a WAP gateway should be set in the WAP account. Other proxy settings should be set in the Internet account.Connecting to/Disconnecting from the InternetIf your device is not connected to the Internet when you try to load a Web page, it will connect automatically. It then remains connected until the idle time you have specified in the Internet accounts settings has elapsed or you disconnect manually.To disconnect, tap on the Status bar and select Disconnect.Opening the Internet BrowserMethod 1Press and hold the key on the device.Method 2Tap the Internet application program icon in the Main screen.Method 3Tap a URL (web address) in a mail or message.Opening Page1. Tap Internet and select Open page.2. In the Location field, enter the web address and then tap Open. If you have previously visited certain web pages, their addresses will appear in the drop-down list. You can also tap to select one from them.To start browsing the Web, just tap any link on the page. Then you can move around on the Web by simply tapping links. A 9235874_3129_zh_tw_FCC.book Page 65 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs66link can be an image or colored, underlined text. An image link is shown with a thin, blue frame that fades away after a second.After a page has been loaded, you can use Find and Find next in the Internet menu to search for a specific text on that page.Note: Pages with frames and Java scripts may not dis-play properly in the browser.• If some or all of the images on the web page can’t be dis-played, they will appear as . Try loading the data again by tapping Internet and select Reload page or Load all images.Tip! To switch between full screen and normal view, tap Edit and select Full screen, or simply press the key. • To bring up a popup menu with useful commands, press the key.Key Operations When BrowsingWhen browsing, you can use the following keys to conveniently move through the web pages and links.Scrolling Pages• Press the key to scroll page up.• Press the key to scroll page down.• Press the key to scroll page left.• Press the key to scroll page right.Link Navigation• Use the keys and , or and , to select and navigate between links. A selected link is highlighted.• Press to open a selected link. • Press to return to the previous page.• If a link is highlighted when you want to use the Scan text function, press any of the normal scrolling keys , , or .Bookmarking Pages1. Navigate to the page you want to bookmark.2. Tap Internet and select Add to bookmarks.3. Enter the bookmark name in the Name field and select a location where the bookmark will be saved in the Folder drop-down list, and then tap Done.Tip! Alternatively, you can bookmark a page by tapping and holding the link to the page and select Add to book-marks.9235874_3129_zh_tw_FCC.book Page 66 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs67Saving Pages for Off-Line Browsing1. Navigate to the page you want to save.2. Tap Internet and select Save page.3. Enter the name for the page in the Name field and select a location where the page will be saved in the Folder drop-down list, and then tap Done.Note: This saves the information on the Web page. However, images and sounds will not be saved.• Some Web pages are not allowed to be cached. These pages can not be saved.To open a saved page:1. Go to the Bookmarks view.2. Tap the name of the saved page that you want to open.Note: If you tap a link on a saved page, you will prob-ably get an error message because the linked page is not available offline.Going to Bookmarked Pages1. Tap Internet and select Bookmarks. Alternatively, you can tap the button on the browser screen.2. The bookmark list screen will appear.Tap a bookmark and the bookmarked page will appear on the browser screen.Operations When Viewing PagesPages and Bookmarks• To move among recently visited pages, tap the or button.• To stop loading a page, tap the button.• To return to the home page, tap the button. See "Basic Options" on page 69 for how to setup your home page.• To go to the bookmark list, tap the button.• To return from the bookmark list to the browser screen, tap the button.Links to Pages• To open a link, tap the link or tapping and holding the link and then select Open link.• To view link information, tap and hold the link and then select Link information.Links to Phone Numbers• To make a call to the phone number, tap and hold the link and then select Call.• To send an SMS to the phone number, tap and hold the link and then select New SMS.• To send an MMS to the phone number, tap and hold the link and then select New MMS.9235874_3129_zh_tw_FCC.book Page 67 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs68• To add the phone number to your contacts, tap and hold the link and then select New contact.Links to Email• To send an email to the link address, tap and hold the link and then select New Email.• To send an MMS to the link address, tap and hold the link and then select New MMS.• To add the email address to your contacts, tap and hold the link and then select New contact.Images• To save an image on the page, tap and hold the image and select Save image.• To copy an image to the clipboard, tap and hold the image and select Copy image.• To view an image in a separate image viewer, tap and hold the image and select View image.• To send an image, tap and hold the image and select Send image as.Managing BookmarksDeleting Bookmarks1. Tap the button to go to the bookmark list.2. Tap the check box beside each bookmark item to select it. You can select multiple bookmarks.3. Tap Internet and select Delete.4. Tap Ye s .Editing Bookmarks1. Tap the button to go to the bookmark list.2. Tap the check box beside a bookmark item to select it.3. Tap Edit and select Edit.4. Tap Edit.5. Edit the location, name, folder of the bookmark or preferred WAP account for connecting to this page and then tap the Done button.Sending Bookmarks1. Tap the button to go to the bookmark list.2. Tap the check box beside a bookmark item to select it.3. Tap Edit and select Edit.4. Tap Send as.5. Select a method for sending the bookmark and then tap the Done button.Managing Bookmark Folders1. In the bookmark list, tap All and select Edit folders.2. You can:• Tap the Add button to create a new folder. Enter the name for the new folder and then tap the Done button.9235874_3129_zh_tw_FCC.book Page 68 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs69• Tap to select a folder on the list and then tap the Delete but-ton to delete the selected folder.• Tap the Rename button to rename selected folder. Enter a new name and then tap the Done button.Browser PreferencesThe Internet browser allows you to change the way the browser deal with the web page contents, security and Internet connections by setting up the preferences options.To access the preferences options, tap Edit on the browser screen and select Preferences.Basic Options• Homepage location: you can specify a favorite page as the default home page when opening the Internet browser by entering the complete address.• WAP account: Select the WAP account to be used when the home page is loaded.• Full screen on new page: Specify whether to switch to the full screen view when viewing the new page.• Vertical scroll bar: Specify whether the vertical scroll bar will be displayed.• Load images: Select if the images will be loaded when open-ing a page. If images are not loaded, the page will open faster.• Play sound: Select if sound should be played when opening a page that contains it.• Play animation: Select if animations should be played when opening a page that contains them.Security Options• Allow cookies: Select if you want to receive cookies when browsing.Advanced Options• WAP Push settings: You can select if you want to receive the Push messages from your network service provider (Enable WAP Pu s h), if the URL should be opened automatically upon reception (Auto load URL), if the out-of-date Push messages should be removed automatically (Auto delete expired), and if sound should be played when a Push mes-sage is received (Push sound).Note: For more information about the availability of the WAP Push messages, please consult your network ser-vice provider.• Cache size: Cache is the space for storing the data of visited web pages for faster loading the next time you visit it. Drag the slider to adjust the size of cache space. To clear the data in cache, tap Clear cache. To clear the history record of vis-ited web pages, tap Clear history.9235874_3129_zh_tw_FCC.book Page 69 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs70TimeThe Time application program allows you to view and set time, date and location information. Besides, you can also set 3 different alarms.Viewing Current Time and DateYou can view current time and by tapping the clock display on the Status bar, or open Time in the Main screen.In the Time screen, you can:Setting Time and DateSpecifying Your Current LocationBefore setting time and date, you must first select your current location.1. In the Time screen, tap Time and select Set location on the menu that appears.2. In the Location tab, tap to set the country information.3. Tap the Numbers tab to set the number format.4. Tap the Done button.Setting Date and Time1. In the Time screen, tap Time and select Set date & time on the menu that appears.2. In the Date and time tab, enter current time and date.3. Tap the Format tab and specify time and date format.4. Tap to go to the Workd ay s tab and set workdays in a week.5. Tap the Done button.Setting Alarms1. In the Time screen, tap one of the 3 alarm fields.2. The alarm setting screen will appear.3. Complete necessary setup and then tap the Done button. You can set up to 3 alarms.Activating/Deactivating AlarmsTo enable or disable an alarm, check or uncheck the check box in each alarm field on the Time screen.Operations When an Alarm Goes offWhen an alarm goes off, you can tap Snooze to postpone the alarm for 5 minutes, or Silence to turn off alarm sound. To turn off the alarm, tap Done (or press the key).To - DoThe To-Do application program helps you to manage your todo items and track the status. Besides, you can also exchange the to-do items with that of the Agenda application for easy planning of your daily schedule.9235874_3129_zh_tw_FCC.book Page 70 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs71Creating New Tasks1. In the To-Do screen, tap To -d o and select New.2. Tap Unfiled and select a folder where you want to place the new task.3. Enter a description of the task, and then specify the follow-ing:• Completed: check the check box if the task is already com-pleted.• Priority: select a priority for the task.• Due date: if the task has a due date, you can tap to check this check box, tap the date that appears and then select a date from a calendar.• Alarm: to set alarm, tap to check this check box, tap the date and time that appear and then adjust alarm time.• Private: if this check box is checked, when you synchronize tasks with other devices, the private tasks will not be seen.4. Tap the tab and write a note for the task. 5. Tap the button to save the new task.Viewing TasksYou can view your tasks on the To-Do screen. Overdue tasks will turn into red. You can sort the tasks by tapping Edit and select Sort by priority or Sort by date.To view a task, tap a task item on the To-Do screen. The details of the task will appear on the screen.Managing TasksChanging Task StatusIf a task is completed, you can check the check box of each task on the To-Do screen to mark the task as “completed”.Finding a TaskTo find a specific task:1. In the To-Do screen, tap To-do and select Find.2. Enter the keyword and select where to search.3. Tap the Find button.4. The tasks that match your search keyword will appear on the screen. You can tap to select and open a task.Editing a Task1. Open a task by tapping it on the To-Do screen.2. Make changes to the task.3. Tap the button to save your changes.Deleting a Task1. Open a task by tapping it on the To-Do screen.2. Tap To - d o and select Delete To-do.3. Tap the Done button. 9235874_3129_zh_tw_FCC.book Page 71 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs72Deleting Completed Tasks1. In the To-Do screen, tap To to and select Delete completed. 2. Select whether to delete all completed tasks, or just the com-pleted tasks in a specific folder. 3. Tap Ye s to delete the tasks.Moving Tasks to the Agenda Application Program1. Open a task by tapping it on the To-Do screen.2. Tap To - d o and select Move to Calendar.3. Tap the Done button.Pasting Tasks from the Agenda Application Program1. Cut or copy an agenda entry in the Agenda application pro-gram.2. In the To-Do screen, tap Edit and select Paste entry.Sending Tasks1. Open a task on the To-Do screen.2. Tap To - d o and select Send as.3. Select from the following and then tap the Done button:• Bluetooth: send the task to other devices that support Blue-tooth technology. A box will appear showing found paired devices. Tap to select a device and then tap the Send button.• Message: send the task to another mobile phone via an SMS message. Enter the number of the recipient and then tap the Send button.• MMS: send the task to another mobile phone as an MMS attachment. The MMS message screen will follow for you to compose the message.• Infrared: send the task to other devices that support infrared connection. Align the infrared port of your device with that of the device and then tap the Send button.Managing Task Folders1. In the To-Do screen, tap All and select Edit folders.2. You can:• Tap the Add button to create a new folder. Enter the name for the new folder and then tap the Done button.• Tap to select a folder on the list and then tap the Delete but-ton to delete the selected folder.• Tap the Rename button to rename selected folder. Enter a new name and then tap the Done button.To-Do Preferences1. In the To-Do screen, tap Edit and select Preferences.2. Set the following items:• Display due dates: if unchecked, the set due dates for each task will not appear on the To-Do screen.• Display completed: if unchecked, the completed tasks will not appear on the To-Do screen.• Alarm sound: tap to select a preferred alarm sound from the drop-down list.9235874_3129_zh_tw_FCC.book Page 72 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs73• Alarm vibrator: if checked, the device will vibrate when the task alarm goes off.CalculatorYou can turn your device into a handy calculator with the Calculator application program.Note: This calculator has limited accuracy and is designed for simple calculations.To perform calculations, tap the numeric and operative buttons on the Calculator screen, and then tap the button to display calculation result.Yo u ca n t ap Calculator and then select Copy or Paste to copy a value from or paste it to other application programs.There are several additional buttons on the Calculator screen:9235874_3129_zh_tw_FCC.book Page 73 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs74VoiceYou can use the Voice application program to record voice notes and save them as sound clips. You can also send them via MMS and email, or use them as ring tones.Creating a New Voice Note1. In the Voice screen, tap Vo i ce and then select New Voice note, or tap the New button.2. Tap the button to start recording.3. To adjust microphone volume, drag the microphone slider to the left or right.4. To stop recording, tap the button. The recording will be saved automatically with recording date and time. You can also tap the button to play the voice note.Tip! It is recommended that you keep the distance between the sound source and the microphone of the device within about 10 ~ 15 cm in order to obtain better recording quality.Playing Voice Notes1. In the Voice screen, tap the or button to select a voice note.2. Tap the button to start playing the selected voice note.3. To adjust playback volume, drag the volume slider to the left or right.4. To pause playing the voice note, tap the button. To resume normal playback, tap the button again.Button Description• Tap this button for the first time to get a value from the calculator memory. • Tap it for a second time to clear the calculator memory.• Tap this button to save an entered value to calcu-lator memory.• When there is already a value on the screen, tap this button to add it to the value in the memory.Tap this button to deduct the entered value from that in the calculator memory.Tap this button to delete the last digit you entered.Tap this button to reset the value on the screen to 0.9235874_3129_zh_tw_FCC.book Page 74 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs75Deleting Voice Notes1. In the Voice screen, tap the or button to select the voice note to delete.2. Tap the Delete button.Sending Voice Notes1. In the Voice screen, tap the or button to select a voice note to send.2. Tap Voice and then select Send as.3. Select from the following and then tap the Done button:• Bluetooth: send the voice note to other devices that support Bluetooth technology. A box will appear showing found paired devices. Tap to select a device and then tap the Send button.• MMS: send the voice note to another mobile phone as an MMS attachment. The MMS message screen will follow for you to compose the message.• Infrared: send the voice note to other devices that support infrared connection. Align the infrared port of your device with that of the device and then tap the Send button.Online ServicesDepending on your network service provider, you may be able to subscribe for certain additional services, such as online banking services or provision of weather or traffic information. Usually the setting for accessing these services are programmed by your network service provider on your SIM card so your device can identify them.For more information on how to subscribe to these additional online services and how to use them, please consult your network service provider.GPRS Data LogYou can use the GPRS data log to track the size of data sent and received via the GPRS data connection.Viewing GPRS Data Log1. Tap the GPRS data log application program icon in the Main screen.2. Tap to select a GPRS connection in the screen.9235874_3129_zh_tw_FCC.book Page 75 Wednesday, October 26, 2005 7:36 PM
Using the Application Programs763. Related information, including total data sent, total data received, data received last session and data sent last session, will appear in a new dialog.4. Tap Done to close the dialog.Resetting GPRS Data CountTa p Reset in the dialog.Deleting GPRS Data LogTa p Delete in the dialog.9235874_3129_zh_tw_FCC.book Page 76 Wednesday, October 26, 2005 7:36 PM
Expanding the Capabilities of Your Device776. Expanding the Capabilities of Your DeviceInstalling Application ProgramsThe Symbian operating system adopted by your device is an open system in the industry, and you can install various application programs designed for it. These programs can be obtained from the Internet, from email attachments, on CDs, memory cards or from other devices.The installation files of the application programs are available in the following formats:• SIS (Symbian Standard Installation)• JAR (Java Archive)Important: Application programs not officially approved and tested by may result in malfunction or loss of data, and should not be held responsible for these dam-ages.Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software.Installing Application Programs from the InternetUsually when you download an application program from the Internet, installation will start automatically after the file is completed saved to your device. Follow the instructions of the installer to complete the installation process.Installing Application Programs from Installation FilesFollow the steps below to install application programs from the installation files on CDs, memory cards, emails or received from other devices.1. Locate the installation file and save it to the device or the memory card.2. In the Main screen, tap Manager and select Install.3. The available programs for installation will appear in the box. Tap to select the program you want to install and then tap Install.Uninstalling Application ProgramsTo uninstall application programs from your device:1. In the Main screen, tap Manager and select Uninstall.2. Installed programs on your device will appear. Tap to select the program you want to uninstall and then tap Uninstall.Note: If another software package depends on the software package that you removed, the other software 9235874_3129_zh_tw_FCC.book Page 77 Wednesday, October 26, 2005 7:36 PM

Navigation menu