Microsoft RM-1 GSM 900/1800/1900 Phone User Manual

Microsoft Mobile Oy GSM 900/1800/1900 Phone

UserManual.wiki >

RM-1 User Manual >

Contents

1. Manual
2. Manual revised

Manual revised

User’s Guide9232323DRAFT ENR0915_en.book Page 1 Wednesday, September 15, 2004 12:14 PM

DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product RM-1 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/Copyright © 2004 Nokia. All rights reserved.Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.Nokia, Nokia Connecting People, and Pop-Port are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.Nokia tune is a sound mark of Nokia Corporation.This product includes software licensed from Symbian Software Ltd (c) 1998-200(4). Symbian and Symbian OS are trademarks of Symbian Ltd.Java™ and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. Stac ®, LZS ®, ©1996, Stac, Inc., ©1994-1996 Microsoft Corporation. Includes one or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425. Other patents pending.Hi/fn ®, LZS ®,©1988-98, Hi/fn. Includes one or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425. Other patents pending.Part of the software in this product is © Copyright ANT Ltd. 1998. All rights reserved.m-Router Connectivity Components © 2000-2002 Intuwave Limited. All rights reserved. (www.intuwave.com)US Patent No 5818437 and other pending patents. T9 text input software Copyright (C) 1997-2004. Tegic Communications, Inc. All rights reserved.USE OF THIS PRODUCT IN ANY MANNER THAT COMPLIES WITH THE MPEG-4 VISUAL STANDARD IS PROHIBITED, EXCEPT FOR USE DIRECTLY RELATED TO (A) DATA OR INFORMATION (i) GENERATED BY AND OBTAINED WITHOUT CHARGE FROM A CONSUMER NOT THEREBY ENGAGED IN A BUSINESS ENTERPRISE, AND (ii) FOR PERSONAL USE ONLY; AND (B) OTHER USES SPECIFICALLY AND SEPARATELY LICENSED BY MPEG LA, L.L.C.Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.The contents of this document are provided ‘as is’. Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior noticeThe availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.Export ControlsThis device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.FCC INDUSTRY CANADA NOTICER0915_en.book Page 2 Wednesday, September 15, 2004 12:14 PM

Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.DRAFT EN, 9232323R0915_en.book Page 3 Wednesday, September 15, 2004 12:14 PM

5Taking pictures in a sequence..................................34You in the picture - self-timer ................................35Adjusting camera settings.........................................35Recording videos..........................................................35Adjusting video recorder settings...........................36Gallery.....................................................................................37Viewing images............................................................38Media .......................................................39Video editor...........................................................................39Editing video, sound, and transitions.....................39Movie director......................................................................40Settings...........................................................................41Image mgr.............................................................................42Recorder.................................................................................42RealPlayer™...........................................................................42Playing video or sound clips.....................................43Streaming content over the air...............................43Receiving RealPlayer settings..................................44Messaging................................................46Writing text...........................................................................47Traditional text input..................................................47Predictive text input - Dictionary...........................48Copying text to clipboard..........................................50Writing and sending messages........................................50Receiving MMS and e-mail settings......................52Inbox - receiving messages..............................................53Receiving multimedia messages.............................53Receiving logos, tones, business cards, calendar entries, and settings...................................................54Receiving Web service messages............................54My folders ............................................................................55Mailbox..................................................................................55Opening the mailbox..................................................55Retrieving e-mail messages......................................55Deleting e-mail messages.........................................56Disconnecting from the mailbox.............................57Outbox - messages waiting to be sent.........................57Viewing messages on a SIM card...................................58Messaging settings.............................................................58Settings for text messages.......................................58Settings for multimedia messages.........................59Settings for e-mail......................................................60Settings for Web service messages........................62Settings for cell broadcast (network service)......63Other settings...............................................................63Calendar and To-do................................64Calendar - creating calendar entries.............................64Calendar views.............................................................65Setting a calendar alarm...........................................65Calendar settings.........................................................66To-do - task list...................................................................66Web..........................................................67R0915_en.book Page 5 Wednesday, September 15, 2004 12:14 PM

8FOR YOUR SAFETYRead these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.SWITCH ON SAFELY Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.INTERFERENCE All wireless phones may be susceptible to interference, which could affect performance.SWITCH OFF IN HOSPITALS Follow any restrictions. Switch the phone off near medical equipment.SWITCH OFF IN AIRCRAFT Follow any restrictions. Wireless phones can cause interference in aircraft.SWITCH OFF WHEN REFUELLING Don't use the phone at a refuelling point. Don't use near fuel or chemicals.SWITCH OFF NEAR BLASTING Follow any restrictions. Don't use the phone where blasting is in progress. USE SENSIBLY Use only in the normal position as explained in the product documentation. Don't touch the antenna unnecessarily.QUALIFIED SERVICE Only qualified personnel may install or repair this product.ENHANCEMENTS AND BATTERIES Use only approved enhancements and batteries. Do not connect incompatible products.WATER-RESISTANCE Your phone is not water-resistant. Keep it dry.BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information.CONNECTING TO OTHER PHONES When connecting to any other phone, read its user guide for detailed safety instructions. Do not connect incompatible products.R0915_en.book Page 8 Wednesday, September 15, 2004 12:14 PM

9EMERGENCY CALLS Ensure the phone function of the phone is switched on and in service. Press as many times as needed to clear the display and return to the start screen. Enter the emergency number, then press . Give your location. Do not end the call until given permission to do so.ABOUT YOUR DEVICEThe wireless device described in this guide is approved for use on the EGSM 900/1800/1900, and UMTS 2000 network. Contact your service provider for more information about networks.When using the features in this device, obey all laws and respect privacy and legitimate rights of others. Warning: To use any features in this device, other than the alarm clock, the phone must be switched on. Do not switch the device on when wireless phone use may cause interference or danger.Network ServicesTo use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These Network Services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize Network Services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use Network Services. For instance, some networks may not support all language-dependent characters and services.Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Contact your service provider for more information.This wireless device is a 3GPP GSM Release 99 terminal supporting GPRS service, and is designed to support also Release 97 GPRS networks. However, there may be some compatibility issues when used in some Release 97 GPRS networks. For more information, contact your service provider.This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as MMS, browsing, e-mail and content downloading via browser or over MMS, require network support for these technologies.Enhancements, batteries, and chargersCheck the model number of any charger before use with this phone. This phone is intended for use when supplied with power from ACP-12 and LCH-12.R0915_en.book Page 9 Wednesday, September 15, 2004 12:14 PM

10Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.Your phone and its enhancements may contain small parts. Keep them out of reach of small children.R0915_en.book Page 10 Wednesday, September 15, 2004 12:14 PM

Personalising your phone14• To restore the selected theme back to its original settings, select Options→ Restore orig. theme when you are editing a theme.R0915_en.book Page 14 Wednesday, September 15, 2004 12:14 PM

Your phone15Your phoneEssential indicators - The phone is being used in a GSM network. (network service) - The phone is being used in a UMTS network. The phone selects the GSM or UMTS network automatically according to the network parameters and the roaming agreements between the network operators. - You have received one or several messages to the Inbox folder in Messaging. - There are messages waiting to be sent in Outbox. See p. 57. and - You have missed calls. See ‘Recent calls’, p.25. - Shown if Ringing type is set to Silent and Message alert tone, IM alert tone, and E-mail alert tone are set to Off. See ‘Profiles - setting tones’, p. 12. - The phone keypad is locked. See the Quick Start Guide, ‘Keypad lock (Keyguard)’. - You have an active alarm. See ‘Clock’, p. 16. - All calls to the phone are diverted to another number. - A headset is connected to the phone. - A loopset is connected to the phone. - The connection to a Bluetooth headset has been lost. - A data call is active. - A packet data connection is available. - A packet data connection is active. - Shown when the packet data connection is on hold. These icons are shown instead of the signal strength indicator (shown in the top left corner in the standby mode). See ‘Packet data connections in GSM and UMTS networks’, p. 99. - An UMTS connection is active. - Bluetooth is active. - Data is being transmitted using Bluetooth. See ‘Bluetooth connection’, p. 88. - USB connection is active.R0915_en.book Page 15 Wednesday, September 15, 2004 12:14 PM

Your phone16Clock Options in Clock: Set alarm, Reset alarm, Remove alarm, Settings, Help, and Exit.Press and select Clock. • To set a new alarm, select Options→ Set alarm. Enter the alarm time, and press OK. When the alarm is active, the indicator is shown.• To turn off the alarm, press Stop. When the alarm tone sounds, press any key or Snooze to stop the alarm for five minutes, after which it will resume. You can do this a maximum of five times.If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you press Stop, the device asks whether you want to activate the device for calls. Press No to switch off the device or Yes to make and receive calls. Do not press Yes when wireless phone use may cause interference or danger.• To cancel an alarm, select Clock→ Options→ Remove alarm.Clock settings• To change the clock settings, select Options→ Settings in Clock.• To change the clock shown in the standby mode, scroll down and select Clock type→ Analogue or Digital.• To allow the mobile phone network to update the time, date, and time zone information to your phone (network service), scroll down and select Auto time update. For the Auto time update setting to take effect, the phone restarts.• To change the alarm tone, scroll down and select Clock alarm tone.• To change the daylight saving time status, scroll down and select Daylight-saving. Select On to add one hour to the My home city time. When the Daylight-saving is active, the indicator is shown.R0915_en.book Page 16 Wednesday, September 15, 2004 12:14 PM

Your phone17World clockOpen Clock and press to open the World clock view. In the World clock view you can view the time in different cities.• To add cities to the list, select Options→ Add city. Enter the first letters of the city name. The search field appears automatically, and the matching cities are displayed. Select a city. You can add a maximum of 15 cities to the list.• To set your current city, scroll to a city, and select Options→ My home city. The city is displayed in the Clock main view and the time in your phone is changed according to the city selected. Check that the time is correct and matches your time zone.Volume control and built-in loudspeaker• To increase or decrease the volume level, when you have an active call or are listening to a sound, press or , respectively.The built-in loudspeaker allows you to speak and listen to the phone from a short distance without having to hold the phone to your ear, for example, having it on a table nearby. Sound applications use the loudspeaker by default.• To locate the loudspeaker, see the Quick Start Guide, ‘Keys and parts’.• To use the loudspeaker during a call, start a call, and press .Important: Do not hold the phone near your ear when the loudspeaker is in use, because the volume may be extremely loud.• To turn off the loudspeaker, when you have an active call or are listening to a sound, press .File manager - managing memoryMany features of the phone use memory to store data. These features include contacts, messages, images, ringing tones, calendar and to-do notes, documents, and downloaded Fig. 2 Navigation bar shows the speaker in use: Handset or Loudsp..R0915_en.book Page 17 Wednesday, September 15, 2004 12:14 PM

Your phone18applications. The free memory available depends on how much data is already saved in the phone memory. You can use a memory card as extra storage space. Memory cards are re-writable, so you can delete and save data on a memory card.• To browse files and folders in the phone memory or on a memory card (if inserted), press and select Organiser→ File mgr.. The phone memory view ( ) opens. Press to open the memory card view ( ).• To move or copy files to a folder, press and at the same time to mark a file, and select Options→ Move to folder or Copy to.Icons in File manager: - folder, - folder that has a subfolder.• To find a file, select Options→ Find, select the memory from which to search, and enter a search text that matches the file name.Viewing memory consumption• To view what types of data you have in the phone and how much memory the different data types consume, select Options→ Memory details. Scroll down to Free memory to view the amount of free memory in the phone.• To view the amount of free memory on the memory card, if you have a card inserted in the phone, press to open the memory card view, and select Options→ Memory details. See Fig. 3, p. 19. Tip! You can use Nokia Phone Browser available in Nokia PC Suite to view the different memories in your phone. See the CD-ROM supplied in the sales package.Memory low - freeing memoryThe phone notifies you if the phone memory or memory card memory is getting low. • To free phone memory, transfer data to a memory card in the File manager. Mark files to be moved, and select Move to folder, select memory card, and a folder.• To remove data to free memory, use the File manager application, or go to the respective application. For example, you can remove: • messages from the Inbox, Drafts, and Sent folders in Messaging• retrieved e-mail messages from the phone memory• saved Web pagesR0915_en.book Page 18 Wednesday, September 15, 2004 12:14 PM

Your phone19• saved images, videos, or sound files• contact information•calendar notes• downloaded applications, see also ‘Application manager’, p. 108.• any other data that you no longer need.Memory card toolPress and select Organiser→ Memory. You can use a memory card as extra storage space. See Quick Start Guide, ‘Inserting the memory card’. You can also back up information from phone memory and restore the information to the phone later.You cannot use the memory card if the door of the memory card slot is open.Keep all memory cards out of the reach of small children.Do not open the memory card slot door in the middle of an operation. Opening the slot door may damage the memory card as well as the device, and data stored on the card may be corrupted. Options in Memory card: Backup phone mem., Restore from card, Format mem. card, Memory card name, Set password, Change password, Remove password, Unlock memory card, Memory details, Help, and Exit.Use only compatible Multimedia cards (MMC) with this device. Other memory cards, such as Secure Digital (SD) cards, do not fit in the MMC card slot and are not compatible with this device. Using an incompatible memory card may damage the memory card as well as the device, and data stored on the incompatible card may be corrupted.• To backup information from phone memory to a memory card, select Options→ Backup phone mem..• To restore information from the memory card to the phone memory, select Options→ Restore from card.• To set a password to protect your memory card against unauthorised use, select Options→ Set password (up to 8 characters). The password is stored in your phone, Fig. 3 Memory consumption of the memory card.R0915_en.book Page 19 Wednesday, September 15, 2004 12:14 PM

Your phone20and you do not have to enter it again while you are using the memory card on the same phone. • To unlock another password-protected memory card in your phone, select Options→ Unlock memory card, and enter the password of the card.Formatting a memory cardWhen a memory card is formatted, all data on the card is permanently lost.Tip! To rename a memory card, go to Memory card and select Options→ Memory card name.Some memory cards are supplied preformatted and others require formatting. Consult your retailer to find out if you must format the memory card before you can use it.To format a memory card, select Options→ Format mem. card. Select Yes to confirm. When formatting is complete, enter a name for the memory card, and press OK.R0915_en.book Page 20 Wednesday, September 15, 2004 12:14 PM

Making calls21Making callsMaking a voice call Tip! To increase or decrease the volume during a call, press or .1In the standby mode, enter the phone number, including the area code. Press to remove a number. For international calls, press twice for the + character (replaces the international access code), and enter the country code, area code (omit the leading zero if necessary), and phone number.2Press to call the number.3Press to end the call (or to cancel the call attempt). Tip! To change the phone number of your voice mailbox, press and select Tools→ Voice mailbox and select Options→ Change number. Enter the number (obtained from your service provider) and press OK.Pressing will always end a call, even if another application is active.Making a call from the Contacts application - Press and select Contacts. Scroll to the desired name; or enter the first letters of the name to the Search field. Matching contacts are listed. Press to call. Select the call type Voice call.Calling your voice mailbox (network service) - To call your voice mailbox, press and hold in the standby mode. See also ‘Call diverting’, p. 106.Calling a recently dialled number - In the standby mode, press to access a list of the 20 last numbers you called or attempted to call. Scroll to the number you want, and press to call the number.Making a video callWhen you make a video call, you can see a real-time, two-way video between you and the recipient of the call. See Figure 4. The video image captured by the camera in your phone will be shown to the video call recipient.R0915_en.book Page 21 Wednesday, September 15, 2004 12:14 PM

Making calls22 Tip! With Nokia Video Call Stand PT-8, you can view your own image and the other caller’s image from your phone display during a video call.To be able to make a video call, you need to have a USIM card and be in the coverage of a UMTS network. For availability of and subscription to video call services, contact your network operator or service provider. A video call can only be made between two parties. The video call can be made to a compatible mobile phone or an ISDN client. Video calls cannot be made while there is another voice, video, or data call active.1To start a video call, enter the phone number in the standby mode, or go to Contacts, and select a contact. Then select Options→ Call→ Video call.2Starting a video call may take a while. A note Waiting for image is shown.If the call is not successful, for example, video calls are not supported by the network, or the receiving device is not compatible, you will be asked if you want to try a normal call or send a message instead.3The video call is active when you can see two video images and hear the sound through the loudspeaker. See Figure 4. The call recipient may deny video sending ( ), in which case you may see a still image or a grey background graphic. You will hear the sound.Icons: - the video call recipient has denied video sending from his device. - you have denied video sending from your phone.Select Enable/Disable: Sending video, Sending audio or Sending audio & video if you want to change between showing video or hearing only sound.Select Zoom in or Zoom out; or press and to zoom your own image. Zoom indicator is shown on the top of the display. 4To end the video call, press . Tip! To speed dial a number by pressing and holding the key, press and select Tools→ Settings→ Call settings and set Speed dialling→ On.Speed dialling a phone number• To assign a phone number to one of the speed dialling keys ( - ), press and select Tools→ Speed dial. is reserved for the voice mailbox. • To call: In standby mode, press the speed dial key and .Fig. 4 Making a video call.R0915_en.book Page 22 Wednesday, September 15, 2004 12:14 PM

Making calls23Making a conference call (network service)1Make a call to the first participant.2To make a call to another participant, select Options→ New call. The first call is automatically put on hold.3When the new call is answered, join the first participant in the conference call. Select Options→ Conference.•To add a new person to the call, repeat step 2, and select Options→ Conference→ Add to conference. The phone supports conference calls between a maximum of six participants, including yourself.•To have a private conversation with one of the participants, select Options→ Conference→ Private. Select a participant and press Private. The conference call is put on hold on your phone. The other participants can still continue the conference call. Once you have finished the private conversation, select Options→ Add to conference to return to the conference call.•To drop a participant, select Options→ Conference→ Drop participant, scroll to the participant, and press Drop. 4To end the active conference call, press .Answering or rejecting a call• To answer the call, press .• To mute the ringing tone when a call comes in, press Silence. Tip! If a compatible headset is connected to the phone, you can answer and end a call by pressing the headset key.• If you do not want to answer a call, press to reject it. The caller will hear a line busy tone. If you have activated the Call divert→ If busy function to divert calls, rejecting an incoming call will also divert the call. See ‘Call diverting’, p. 106.When you reject an incoming call, you can also send a text message to the caller informing why you could not answer the call. Select Options→ Reject & send SMS. You can edit the text before sending it. See also Reject call with SMS, p. 97.R0915_en.book Page 23 Wednesday, September 15, 2004 12:14 PM

Making calls24Answering or rejecting a video callWhen a video call arrives, you can see the icon .1Press to answer the video call. Allow video image to be sent to caller? is shown.If you select Yes, the image being captured by the camera in your phone is shown to the caller. If you select No, video sending is not activated, and a still image is shown. You will hear the sound. See ‘Tools’, Image in vid. call, p. 98.If you use Nokia Video Call Stand PT-8, video call starts when you place the phone in the stand.2To end the video call, press .Call waiting (network service)You can answer a call while you have another call in progress if you have activated the Call waiting function in Tools→ Settings→ Call settings→ Call waiting (see also p. 24). Tip! To change the phone tones for different environments and events, for example, when you want your phone to be silent, see ‘Profiles - setting tones’, p. 12.• To answer the waiting call, press . The first call is put on hold.• To switch between the two calls, press Swap. Select Options→ Transfer to connect an incoming call or a call on hold with an active call and to disconnect yourself from the calls. To end the active call, press . To end both calls, select Options→ End all calls.Options during a callMany of the options that you can use during a call are network services. Press Options during a call for some of the following options: Mute or Unmute, Answer, Reject, Swap, Hold or Unhold, Activate handset, Activate loudsp., or Activate handsfree (if a compatible Bluetooth headset is attached), End active call or End all calls, New call, Conference, and Transfer. Select: R0915_en.book Page 24 Wednesday, September 15, 2004 12:14 PM

Making calls25 Tip! You can add DTMF tones to the Phone number or DTMF fields in a contact card. •Replace - to end an active call and replace it by answering the waiting call.•Send MMS (in UMTS networks only) - to send an image or a video in a multimedia message to the other participant of the call. You can edit the message and change the recipient before sending. Press to send the file to a compatible device (network service).•Send DTMF - to send DTMF tone strings, for example, a password. Enter the DTMF string or search for it in Contacts. To enter a wait character (w) or a pause character (p), press repeatedly. Press OK to send the tone.LogRecent calls To monitor the phone numbers of missed, received, and dialled calls, press and select Log→ Recent calls. The phone registers missed and received calls only if the network supports these functions, the phone is switched on, and within the network’s service area. Tip! When you see a note in standby mode about missed calls, press Show to access the list of missed calls. To call back, scroll to a name or number, and press .Erasing recent call lists - To clear all recent call lists, select Options→ Clear recent calls in the Recent calls main view. To clear one of the call registers, open the register you want to erase, and select Options→ Clear list. To clear an individual event, open a register, scroll to the event, and press .Call duration To monitor the approximate duration of your incoming and outgoing calls, press and select Log→ Call duration.R0915_en.book Page 25 Wednesday, September 15, 2004 12:14 PM

Making calls26 Tip! If you want to see the call duration timer while you have an active call, select Options→ Settings→ Show call duration→ Yes.Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding off for billing, and so forth.Clearing call duration timers - Select Options→ Clear timers. For this you need the lock code, see ‘Security’, ‘Phone and SIM’, p. 102. To clear an individual event, scroll to it, and press .Packet dataTo check the amount of data sent and received during packet data connections, press and select Log→ Packet data. For example, you may be charged for your packet data connections by the amount of data sent and received.Monitoring all communication eventsIcons: - incoming, - outgoing, and - missed communication events.To monitor all voice and video calls, text messages, or data connections registered by the phone, press and select Log, and press to open the general log. See Fig. 5. For each communication event, you can see the sender or recipient name, phone number, name of the service provider, or access point. You can filter the general log to view just one type of event and create new contact cards based on the log information. Tip! To view a list of sent messages, press and select Messaging → Sent.Subevents, such as a text message sent in more than one part and packet data connections, are logged as one communication event. Connections to your mailbox, multimedia messaging centre, or Web pages are shown as packet data connections.Note: When sending messages, your phone may display the word “Sent“. This is an indication that the message has been sent by your phone to the message centre number programmed into your phone. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your service provider.R0915_en.book Page 26 Wednesday, September 15, 2004 12:14 PM

Making calls27• To filter the log, select Options→ Filter. Scroll to a filter and press Select.• To erase the contents of the log, Recent calls register, and Messaging delivery reports permanently, select Options→ Clear log. Press Yes to confirm.• To set the Log duration, go to Options→ Settings→ Log duration. The log events remain in the phone memory for a set number of days after which they are automatically erased to free memory. If you select No log, all the log contents, Recent calls register, and Messaging delivery reports are permanently deleted.Packet data counter and connection timer: To view how much data, measured in kilobytes, has been transferred and how long a certain packet data connection has lasted, scroll to an incoming or outgoing event with the access point icon and select Options→ View details. Fig. 5 General log of communication events.R0915_en.book Page 27 Wednesday, September 15, 2004 12:14 PM

Contacts (Phonebook)28Contacts (Phonebook) Options in the Contacts directory: Open, Call, Create message, New contact, Open conversation, Edit, Delete, Duplicate, Add to group, Belongs to groups, Mark/Unmark, Copy, SIM contacts, Go to web address, Send, Contacts info, Settings, Help, and Exit.Press and select Contacts. In Contacts you can add a personal ringing tone, voice tag, or a thumbnail image to a contact card. You can also create contact groups, which allow you to send text messages or e-mail to many recipients at the same time. You can add received contact information (business cards) to Contacts. See ‘Receiving logos, tones, business cards, calendar entries, and settings’, p. 54. Contact information can only be sent to or received from compatible devices.Saving names and numbers1Select Options→ New contact.2Fill in the fields that you want, and press Done. Options when editing a contact card: Add thumbnail, Remove thumbnail, Add detail, Delete detail, Edit label, Help, and Exit.• To edit contact cards in Contacts, scroll to the contact card you want to edit, and select Options→ Edit.• To delete a contact card in Contacts, select a card, and press . To delete several contact cards at the same time, press and to mark the contacts, and press to delete. Tip! You can add and edit contact cards using Nokia Contacts Editor available in Nokia PC Suite. See the CD-ROM supplied in the sales package.• To attach a small thumbnail image to a contact card, open the contact card and select Options→ Edit. Then select Options→ Add thumbnail. The thumbnail image is shown when the contact calls.R0915_en.book Page 28 Wednesday, September 15, 2004 12:14 PM

Contacts (Phonebook)29Using default numbers and addressesYou can assign default numbers or addresses to a contact card. In this way if a contact has several numbers or addresses, you can easily call or send a message to the contact into a certain number or address.1In Contacts, select a contact, and press .2Select Options→ Defaults.3Select a default to which you want to add a number or an address, and press Assign.4Select a number or an address you want to set as a default, and press Select.The default number or address is underlined in the contact card. Copying contacts between the SIM card and device memory Tip! To send contact information, select the card you want to send. Select Options→ Send→ Via text message, Via multimedia or Via Bluetooth. See the ‘Messaging’ chapter, and ‘Sending data using Bluetooth’, p. 89.• To copy names and numbers from a SIM card to your phone, press and select Contacts→ Options→ SIM contacts→ SIM directory. Select the names you want to copy, and select Options→ Copy to Contacts.• To copy a telephone, fax, or pager number from Contacts to your SIM card, select Contacts, and open a contact card. Scroll to the number, and select Options→ Copy→ To SIM directory.SIM directory and other SIM servicesNote: For availability, rates, and information on using SIM services, contact your SIM card vendor (network operator, service provider or other vendor).Press and select Contacts→ Options→ SIM contacts→ SIM directory to see the names and numbers stored on the SIM card. In SIM directory you can add, edit, or copy numbers to Contacts, and you can make calls.R0915_en.book Page 29 Wednesday, September 15, 2004 12:14 PM

Contacts (Phonebook)30Adding ringing tones for contactsWhen a contact or group member calls you, the phone plays the chosen ringing tone (if the caller’s telephone number is sent with the call and your phone recognises it). Tip! Speed dialling is a quick way to call frequently used numbers. You can assign speed dialling keys to eight phone numbers. See “Speed dialling a phone number”, p.22.1Press to open a contact card or go to the Groups list and select a contact group.2Select Options→ Ringing tone. A list of ringing tones opens.3Select the ringing tone you wish to use for the individual contact or the selected group.To remove the ringing tone, select Default tone from the list of ringing tones.Voice diallingYou can make a phone call by saying a voice tag that has been added to a contact card. Any spoken words can be a voice tag. Tip! You can synchronise your contacts to a compatible PC with Nokia PC Suite. See the CD-ROM supplied in the sales package.Before using voice tags, note that:• Voice tags are not language-dependent. They are dependent on the speaker's voice.• You must say the name exactly as you said it when you recorded it.• Voice tags are sensitive to background noise. Record voice tags and use them in a quiet environment.• Very short names are not accepted. Use long names and avoid similar names for different numbers.Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialling in all circumstances.Adding a voice tag to a phone number Example: You can use a person’s name as a voice tag (for example, ’John’s mobile’.You can have only one voice tag per contact card. You can add a voice tag to up to 50 phone numbers.1In Contacts, open the contact card to which you want to add a voice tag.R0915_en.book Page 30 Wednesday, September 15, 2004 12:14 PM

Contacts (Phonebook)312Scroll to the number to which you want to add the voice tag and select Options→ Add voice tag. Tip! To view a list of voice tags you have defined, select Options→ Contacts info→ Voice tags in Contacts.3Press Start to record a voice tag. After the starting tone, say clearly the words you want to record as a voice tag. Wait until the phone plays the recorded tag and saves it. A symbol can be seen next to the number in the contact card indicating that a voice tag has been added to it.Making a call by saying a voice tagYou must say the voice tag exactly as you said it when you recorded it. When you are making a call by saying a voice tag, the loudspeaker is in use. Hold the phone at a short distance away and say the voice tag clearly.• Press and hold . A short tone is played and the note Speak now is displayed. The phone plays the original voice tag, displays the name and number, and dials the number of the recognised voice tag. Tip! To listen to, change, or delete a voice tag, open a contact card and scroll to the number that has a voice tag (indicated by ). Select Options→ Voice tags. Then select either Playback, Change, or Delete.Creating contact groups1In Contacts, press to open the Groups list.2Select Options→ New group. 3Write a name for the group or use the default name Group %N and press OK. 4Open the group, and select Options→ Add members.5Scroll to a contact, and press to mark it. To add multiple members at a time, repeat this action on all the contacts you want to add.6Press OK to add the contacts to the group.To rename a group, select Options→ Rename. Then enter the new name, and press OK.R0915_en.book Page 31 Wednesday, September 15, 2004 12:14 PM

Contacts (Phonebook)32 Options in the Groups list view: Open, New group, Delete, Rename, Ringing tone, Contacts info, Settings, Help, and Exit.Removing members from a group1In the Groups list, open the group you want to modify.2Scroll to the contact, and select Options→ Remove from group.3Press Yes to remove the contact from the group. Tip! To check to which groups a contact belongs, scroll to the contact, and select Options→ Belongs to groups.R0915_en.book Page 32 Wednesday, September 15, 2004 12:14 PM

Camera and Gallery33Camera and GalleryCamera Shortcut: Press in the standby mode to open Camera.With the Camera application you can take pictures and record videos while on the move. The images and video are automatically saved in the Gallery application. The camera produces JPEG images, and video clips are recorded in the 3GPP file format with the .3gp file extension. You can also send images or a video in a multimedia message, as an e-mail attachment, or using a Bluetooth connection. Tip! You can insert an image into a contact card. See ‘Saving names and numbers’, p. 28.The Nokia 6630 device supports an image capture resolution of up to 1280 x 960 pixels. The image resolution in these materials may appear different.Taking pictures Options before taking a picture: Capture, New, Activate night mode / Deact. night mode, Sequence mode / Normal mode, Self-timer, Go to Gallery, Adjust, Settings, Help, and Exit.1Press in the standby mode. The Camera application opens, and you can see the view to be captured. See Figure. Press to move between Image and Video views. 1.Indicator shows where the images will be saved: to phone memory ( ) or memory card ( ).2.Shows how many images, depending on the selected picture quality, fit in the memory of your phone or the memory card.3.The zoom indicator shows the zoom level. Press to zoom in, press to zoom out.4.Night mode active indicator .5.The sequence mode indicator . See p. 34.6.The self-timer indicator shows how much time is left before a picture is taken. See p. 35.R0915_en.book Page 33 Wednesday, September 15, 2004 12:14 PM

Camera and Gallery34Shortcuts: Press to activate or deactivate Night mode. Press to activate or deactivate Sequence mode.Press to adjust brightness. Press to adjust contrast.2To take a picture, press . Do not move the phone before the Camera application starts to save the image. The image is saved automatically in the Images folder of Gallery. See ‘Gallery’, p. 37. When taking a picture:• It is recommended to use both hands to keep the camera still. • To take images or record video in a dark environment, use the Night mode. If you are using the Night mode, the exposure time is longer and the camera needs to be kept still longer. • To adjust brightness or contrast before taking a picture, select Options→ Adjust→ Brightness or Contrast.• The resolution of a zoomed picture is lower than that of a non-zoomed picture, but the image remains the same size. You may notice the difference in image quality if viewed on a PC, for example.•Camera goes into battery saving mode if there are no key presses within a minute. To continue taking pictures, press .After the image has been taken: • If you do not want to keep the image, press .• To return to the viewfinder to take a new picture, press .• To send the image via Bluetooth, via e-mail, or Via multimedia, press . For more information see the ‘Messaging’ chapter, p. 46 and ‘Bluetooth connection’, p. 88.• To set the picture as wallpaper in the standby mode, select Options→ Set as wallpaper.Taking pictures in a sequenceSelect Options→ Sequence mode to set the camera to take 6 pictures in a sequence. After the pictures have been taken, they are automatically saved in the Gallery, and they are shown in a grid. See Fig. 6. Fig. 6 Pictures taken in a sequence.R0915_en.book Page 34 Wednesday, September 15, 2004 12:14 PM

Camera and Gallery35You in the picture - self-timerUse the self-timer to delay the taking of a picture so that you can include yourself in the picture. Select the self-timer delay: Options→ Self-timer→ 10 seconds, 20 seconds, or 30 seconds. Press Activate. You can see the self-timer indicator ( ) blink and hear a beep when the timer is running. The camera will take the picture after the selected delay has elapsed.Adjusting camera settings1Select Options→ Settings→ Image.2Scroll to the setting you want to change: Glossary: Resolution is a measure of sharpness and clarity of an image. Resolution refers to the number of pixels in an image. The more pixels, the more detailed the picture is, and the more memory it consumes.•Show captured image - Select Yes if you want to see the captured image after it has been taken or No if you want to continue taking pictures immediately.•Image quality - High, Normal, and Basic. The better the image quality, the more memory the image consumes. The resolution of a zoomed picture is lower than that of a non-zoomed picture, but the image remains the same size. You may notice the difference in image quality if viewed on a PC, for example. If you are going to print the image, select High or Normal image quality.•Image resolution - Select the resolution you want to use for the images you are going to take. When pictures are taken using the Sequence mode, resolution setting may be temporarily changed to a lower value.•Default image name - Set a default name for the images you are going to take. You can replace date with your own text (for example, ‘Holiday_2004’).•Memory in use - Select where to store your images.Recording videos1Press Camera in the standby mode. R0915_en.book Page 35 Wednesday, September 15, 2004 12:14 PM

Camera and Gallery362Press to move between Image and Video views. Open the Video view. An indicator shows where the video will be saved: to phone memory ( ) or memory card ().3Press to start recording. The record icon is shown. Options before recording a video: Record, New, Activate night mode / Deact. night mode, Mute / Unmute, Go to Gallery, Adjust, Settings, Help, and Exit.1. The elapsed time / time left with the current video length setting.2.The zoom indicator shows the zoom level. Press to zoom in on your subject before or during recording. Press to zoom out.3. Microphone muted indicator .4. Night mode active indicator .To pause recording at any time, press . The pause icon starts to blink on the display. Press again to resume recording. Shortcuts: Press to activate or deactivate Night mode.Press to adjust brightness. Press to adjust contrast.Video recording is automatically stopped if recording is set to pause and there are no key presses within a minute.4Press Stop to stop recording. The video clip is automatically saved to the Video clips folder of the Gallery. See ‘Gallery’, p. 37.After a video clip has been recorded:• To immediately play the video clip you just recorded, select Options→ Play.• If you do not want to keep the video, press .• To return to the viewfinder to record a new video, press .• To send the video via Bluetooth, via e-mail, or Via multimedia, press . For more information see the ‘Messaging’ chapter, p. 46 and ‘Bluetooth connection’, p. 88.Adjusting video recorder settingsSelect Options→ Settings→ Video and the setting you want to change:R0915_en.book Page 36 Wednesday, September 15, 2004 12:14 PM

Camera and Gallery37•Length - If you select Maximum, the length of the video recording is restricted to one hour per clip. Select Short to record video clips up to 300 kB, which is approximately 30 seconds in duration, so that they can be conveniently sent as a multimedia message to a compatible device. Some networks, however, may only support sending of multimedia messages with the maximum size of 100 kB. •Video resolution, Default video name and Memory in use.GalleryIn the Gallery application you can store and organise your images, sound clips, playlists, video clips, streaming links, and .ram files.Select Images , Video clips , Tracks , Sound clips , Links , or All files , and press to open it.You can browse, open, and create folders; and mark, copy and move items to folders. Sound clips, video clips, .ram files, and streaming links are opened and played in the RealPlayer application. See ‘RealPlayer™’, p. 42.• Press to open a file or a folder. Images are opened in the Image viewer. See ‘Viewing images’, p. 38. • To copy or move files to the memory card or to phone memory, select a file and Options→ Organise→ Copy to memory card / Move to memory card or Copy to phone mem. / Move to phone mem.. Files stored on the memory card are indicated with .• To download files into the Gallery in one of the main folders using the browser, select Graphic downls., Video downlds., Track downlds., or Sound downlds.. The browser opens, and you can choose a bookmark for the site to download from.R0915_en.book Page 37 Wednesday, September 15, 2004 12:14 PM

Camera and Gallery38 Tip! You can transfer images from your phone to a compatible PC with Nokia Phone Browser available in Nokia PC Suite. See the CD-ROM supplied in the sales package.• To search for a file, select Options→ Find. Start to enter a search string (for example, the name or date of the file you are searching). Files that match your search are shown.Viewing imagesPictures taken with the Camera application are stored in the Gallery. Images can also be sent to you in a multimedia message, as an e-mail attachment, or through Bluetooth. To be able to view a received image in Gallery, you need to save it in the phone memory or on a memory card.•Open the Images folder in the Gallery to start the image viewer, select an image, and press to view it. Options when viewing an image: Send, Set as wallpaper, Rotate, Zoom in / Zoom out, Full screen, Delete, Rename, View details, Add to 'Go to', Help, and Exit.• To zoom an image, select Options→ Zoom in (or press ) or Zoom out (or press ). You can see the zooming ratio at the top of the display. The zooming ratio is not stored permanently.• To see more of the image, select Options→ Full screen (or press ). The panes around the image are removed. To move the focus when you are zooming an image or viewing an image in full screen mode, use the scroll key.• To rotate the image, select Options→ Rotate (or press to rotate anticlockwise and to rotate clockwise). Press and hold to return to the normal view.R0915_en.book Page 38 Wednesday, September 15, 2004 12:14 PM

Media39MediaVideo editorTo create custom video clips, press and select Media→ Vid. editor. You can create custom video clips by combining and trimming video clips, and adding sound clips, transitions, and effects. Transitions are visual effects that you can add in the beginning and end of the video or between the video clips. Editing video, sound, and transitions1Mark and select one or more video clips.2Select Options→ Edit. In the Edit video view, you can insert video clips to make a custom video clip, and edit the clips by trimming and adding effects. You can add sound clips and change their duration. To modify the video, select one of the following options:Preview - Previews the custom video clip.Insert :•Video clip - Inserts the selected video clip. A thumbnail of the video clip is shown in the Main view. A thumbnail consists of the first non-black view of the video clip. The name and length of the selected video clip is also shown.•Sound clip - Inserts the selected sound clip. The name and length of the selected sound clip is shown in the Main view.•New sound clip - Records a new sound clip to the selected location.Cut - Trims the video clip or a sound clip in the Cut video clip or in the Cut sound clip view. Fig. 7 The Edit video view, where the selected transition is set to Dip to black.R0915_en.book Page 39 Wednesday, September 15, 2004 12:14 PM

Media40 Tip! To take a snapshot of a video clip, select Options→ Take screen shot in the Play view, Edit Preview view or in the Cut view.Edit video clip:•Move - Moves the video clip to the selected location.•Add colour effect - Inserts a colour effect on the video clip.•Use slow motion - Slows the speed of the video clip.•Mute sound / Unmute sound- Mutes or unmutes the original video clip sound.•Remove - Removes the video clip from the video.•Edit sound clip:•Move - Moves the sound clip to the selected location.•Set duration - Edits the sound clip length.•Remove - Removes the sound clip from the video.•Duplicate - Makes a copy of the selected video clip or sound clip.•Edit transition - There are three types of transitions: at the start of a video, at the end of a video, and transitions between video clips. A start transition can be selected when the first transition of the video is active.3Select Save to save your video. You can define the Memory in use in the Settings. The default is the phone memory. Tip! In the Settings view you can define the Default video name, Default sc. shot name and the Memory in use.Select Send: Via multimedia, Via Bluetooth, or Via e-mail if you want to send the video. Contact your service provider for details of the maximum multimedia message size that you can send. If your video is too large to be sent in a multimedia message, a symbol will appear. Tip! If you want to send a video clip that is over the maximum multimedia message size allowed by your service provider, you can send the clip using Bluetooth. ‘Sending data using Bluetooth’, p. 89. You can also transfer your videos using Bluetooth into your Bluetooth-enabled personal computer, or by using a memory card reader (internal/external).Movie directorTo create muvees, press and select Media→ Movie. muvees are short, edited video clips that can contain video, music and text. Quick muvee is created automatically by the Movie R0915_en.book Page 40 Wednesday, September 15, 2004 12:14 PM

Media41director after you have selected the style for the muvee. Movie director uses the default music and text associated with the chosen style. Every style has, for example, its own font style, colour, music, and pace. To Custom muvee you can select your own video and music clips, images and style, and you can also add an opening and closing message. muvees can be sent using MMS.Open Movie, and press or to move between the and views. You can also return to the main view from the view by pressing Done.The view contains a list of video clips that you can Play, Send, Rename, and Delete. Tip! To download new styles to your phone, select Style downloads from the Movie director main view. • To create a quick muvee, select Quick muvee, and press . Select a style for the muvee from the style list, and press . The created muvee will be saved in the Movie director muvee list. The muvee will be played automatically after saving.• To create a custom muvee, select Custom muvee. In Video, Image, Style, or Music, select the clips you want to include in your muvee. In Message you can add an opening text and a closing text to a muvee. Select Create muvee.:•Multimedia message - the length of the muvee is optimised for MMS sending.•Same as music - to set the muvee duration to be the same as the music clip chosen. Options in the muvee list options menu: Play, Send, Rename, Delete, Help and Exit.•User defined - to define the length of the muvee.Select Options→ Save.• To preview the custom muvee before saving it, in Preview muvee view, select Options→ Play.• To create a new custom muvee by using the same style settings, select Options→ Recreate.• To add an opening text and a closing text to a custom muvee when you are creating it, in Create muvee view select Message. Enter the opening message and the closing message, and select Done.SettingsSelect Settings to edit the following options:R0915_en.book Page 41 Wednesday, September 15, 2004 12:14 PM

Media42•Memory in use - Select where to store your muvees.•Resolution - Select the resolution of your muvees.•Default muvee name - Set a default name for the muvees.Image mgr.To browse your images visually, press and select Media→ Image mgr. See Fig. 8. 1Press to select the memory: Phone or Memory card. Image manager also shows how many folders or images are in the selected folder.2Open a folder to browse your images visually. Press and to move between images and folders. Press to view an image.•Press and simultaneously to mark images for an image show. A check mark is shown next to a selected image. Select Options→ Image show. Press and to view the next or previous image in the show.RecorderPress and select Media→ Recorder to record telephone conversations and voice memos. If you are recording a telephone conversation, both parties will hear a tone every five seconds during recording.RealPlayer™Press and select Media→ RealPlayer. With RealPlayer™, you can play video clips, sound clips, and playlists, or stream media files over the air. A streaming link can be activated when you are browsing Web pages, or it can be stored in the phone memory or memory card. RealPlayer supports files with the extensions such as .aac, .awb, .mid, .mp3 and .wav.However, RealPlayer does not necessarily support all file formats or all the variations Fig. 8 Images viewed in Image manager.R0915_en.book Page 42 Wednesday, September 15, 2004 12:14 PM

Media43of file formats. For example, RealPlayer will attempt to open all .mp4 files, but some .mp4 files may include content that is not compliant with 3GPP standards and, therefore, is not supported by this phone. Options in RealPlayer when a clip is selected: Play, Play in full screen/Continue, Continue in full scr.; Stop, Mute/Unmute, Clip details, Send, Settings, Help, and Exit.Playing video or sound clips1To play a media file stored in phone memory or memory card, select Options→ Open and select:•Most recent clips - To play one of the last six files played in RealPlayer,•Saved clip - To play a file saved in the Gallery. See ‘Gallery’, p. 37.2Scroll to a file, and press to play the file. Tip! To view a video clip in full screen mode, press . Press again to change back to normal screen mode.Icons: - Repeat, - Random, - Repeat and random, - Loudspeaker mutedStreaming content over the airTo stream live content, you must first configure your default access point. See ‘Data connections and access points’, p. 99, Many service providers require you to use an Internet access point (IAP) for your default access point. Other service providers allow you to use a WAP access point. Contact your service provider for more information. Note: In RealPlayer, you can only open an rtsp:// URL address. However, RealPlayer will recognise an http link to a .ram file.R0915_en.book Page 43 Wednesday, September 15, 2004 12:14 PM

Media44Shortcuts during play:To fast forward, press and hold . To rewind through the media file, press and hold . To mute the sound, press and hold until the indicator is displayed. To turn on the sound, press and hold until you see the indicator.To stream content over the air, select a streaming link saved in the Gallery, on a Web page, or received in a text message or multimedia message. Before live content begins streaming, your phone will connect to the site and start loading the content.Receiving RealPlayer settingsYou may receive RealPlayer settings in a special text message from the network operator or service provider. See ‘Receiving logos, tones, business cards, calendar entries, and settings’, p. 54. For more information, contact your network operator or service provider.Changing the RealPlayer settingsSelect Options→ Settings:Glossary: Proxy servers are intermediate servers between media servers and their users. Some service providers use them to provide additional security or speed up access to browser pages that contain sound or video clips. Video - To have RealPlayer automatically repeat video clips after they finish playing.Audio settings - To select if you want to repeat playing of track lists and play sound clips on a track list in random order.Connection settings - To select whether to use a proxy server, change the default access point, and set the time-outs and port range used when connecting. Contact your service provider for the correct settings.•Proxy settings:•Use proxy - To use a proxy server, select Yes.•Proxy serv. address - Enter the IP address of the proxy server.•Proxy port number - Enter the port number of the proxy server.•Network settings:•Default access point - Scroll to the access point you want to use to connect to the Internet, and press .•Online time - Set the time for RealPlayer to disconnect from the network when you have paused a media clip playing through a network link, select User defined, and press . Enter the time, and press OK.R0915_en.book Page 44 Wednesday, September 15, 2004 12:14 PM

Media45•Connection time-out - Press or to set the maximum time to elapse between selecting a network link and connecting to the media server, and press OK.•Server time-out- Press or to set the maximum time to wait for a response from the media server before disconnecting, and press OK.•Lowest UDP port - Enter the lowest port number of the server's port range. The minimum value is 6970.•Highest UDP port - Enter the highest port number of the server's port range. The maximum value is 32000.Select Options→ Advanced settings to edit the bandwidth values for different networks.R0915_en.book Page 45 Wednesday, September 15, 2004 12:14 PM

Messaging46Messaging Options in the Messaging main view: Open, Create message, Connect (shown if you have defined mailbox settings) / Disconnect (shown if a connection to mailbox is active), SIM messages, Cell broadcast, Service command, Settings, Help, and Exit.Press and select Messaging. In Messaging, you can create, send, receive, view, edit, and organise text messages, multimedia messages, e-mail messages, and special text messages containing data. You can also receive messages and data through Bluetooth, receive Web service messages, cell broadcast messages as well as send service commands.Note: These functions can only be used if they are supported by your network operator or service provider. Only devices that offer compatible multimedia message, or e-mail features can receive and display these messages. Some networks might provide the recipient device with a Web page link to view multimedia messages.When you open Messaging, you can see the New message function and a list of folders: Inbox - contains received messages except e-mail and cell broadcast messages. E-mail messages are stored in the Mailbox. Tip! Organise your messages by adding new folders under My folders. My folders - for organising your messages into folders. Mailbox - In Mailbox you can connect to your remote mailbox to retrieve your new e-mail messages or view your previously retrieved e-mail messages offline. See ‘Settings for e-mail’, p. 60. Tip! When you have opened any of the default folders, you can switch between the folders by pressing or . Drafts - stores draft messages that have not been sent. Sent - stores the last 15 messages that have been sent excluding messages sent using Bluetooth. To change the number of messages to be saved, see ‘Other settings’, p. 63. Outbox - is a temporary storage place for messages waiting to be sent. Reports- You can request the network to send you a delivery report of the text messages and multimedia messages you have sent (network service). Receiving a delivery R0915_en.book Page 46 Wednesday, September 15, 2004 12:14 PM

Messaging47report of a multimedia message that has been sent to an e-mail address might not be possible.• To enter and send service requests (also known as USSD commands), such as activation commands for network services, to your service provider, select Messaging→ Options→ Service command in the main view of Messaging. Options in Cell broadcast: Open, Subscribe /Unsubscribe, Hotmark / Remove hotmark, Topic, Settings, Help, and Exit.• Cell broadcast is a network service that allows you to receive messages on various topics, such as weather or traffic conditions from your service provider. For available topics and relevant topic numbers, contact your service provider. In the main view of Messaging, select Options→ Cell broadcast. In the main view you can see the status of a topic, a topic number, name, and whether it has been flagged ( ) for follow-up.Cell broadcast messages cannot be received in UMTS networks. A packet data connection may prevent cell broadcast reception.Writing textTraditional text input Icons: and indicate the selected case. means that the first letter of the word, is written in upper case, and all the other letters will automatically be written in lower case. indicates number mode.The indicator is shown on the top right of the display when you are writing text using traditional text input.• Press a number key ( - ) repeatedly until the desired character appears. There are more characters available for a number key than are printed on the key.• To insert a number, press and hold the number key. • To switch between letter and number mode, press and hold .• If the next letter is located on the same key as the present one, wait until the cursor appears (or press to end the time-out period), and enter the letter.• To erase a character, press . Press and hold to clear more than one character.• The most common punctuation marks are available under . Press repeatedly to reach the desired punctuation mark.R0915_en.book Page 47 Wednesday, September 15, 2004 12:14 PM

Messaging48Press to open a list of special characters. Use to move through the list, and press Select to select a character.• To insert a space, press . To move the cursor to the next line, press three times.• To switch between the different character cases Abc, abc, and ABC, press .Predictive text input - DictionaryYou can enter any letter with a single keypress. The predictive text input is based on a built-in dictionary to which you can also add new words. When the dictionary becomes full, the latest added word replaces the oldest. 1To activate predictive text input, press , and select Dictionary on. This will activate predictive text input for all editors in the phone. The indicator is shown on the top right of the display when you are writing text using predictive text input.2To write the desired word, press the keys - . Press each key only once for one letter. For example, to write ‘Nokia’ when English dictionary is selected, press for N, for o, for k, for i, and for a.See the Fig. 9. The word suggestion changes after each key press.3When you have finished writing the word and it is correct, confirm it by pressing or add a space by pressing .•If the word is not correct, press repeatedly to view the matching words the dictionary has found one by one. Or, press and select Dictionary→ Matches.•If the ? character is shown after the word, the word you intended to write is not in the dictionary. To add a word to the dictionary, press Spell, enter the word (up to 32 letters) using traditional text input, and press OK. The word is added to the dictionary. When the dictionary becomes full, a new word replaces the oldest added word.4Start writing the next word. Tip! To set predictive text input on or off, press twice quickly.Fig. 9 The word match is evolving, wait until you have keyed in the whole word before you check the results.R0915_en.book Page 48 Wednesday, September 15, 2004 12:14 PM

Messaging49Tips on using predictive text input• To erase a character, press . Press and hold to clear more than one character.• To change between the different character cases Abc, abc, and ABC, press . If you press quickly twice, the predictive text input is turned off. Tip! The predictive text input will try to guess which commonly used punctuation mark (.,?!‘) is needed. The order and availability of the punctuation marks depend on the language of the dictionary.• To insert a number in letter mode, press and hold the desired number key.To switch between letter and number mode, press and hold .• The most common punctuation marks are available under . Press and then repeatedly to search for the desired punctuation mark.• Press and hold to open a list of special characters.• Press repeatedly to view the matching words the dictionary has found one by one.• Press , select Dictionary, and press to select one of the following options:Matches to view a list of words that correspond to your key presses. Insert word to add a word (up to 32 letters) to the dictionary by using traditional text input. When the dictionary becomes full, a new word replaces the oldest added word.Edit word to edit the word using traditional text input. This is available if the word is active (underlined). Tip! When you press , the following options appear (depending on the editing mode): Dictionary (predictive text input), Alpha mode (traditional text input), Number mode, Cut (if text has been selected), Copy (if text has been selected), Paste (when text has been cut or copied first), Insert number, Insert symbol, and Writing language: (changes the input language for all editors in the phone).Writing compound wordsWrite the first half of a compound word; to confirm it, press . Write the last part of the compound word. To complete the compound word, press to add a space.Turning predictive text input offPress , and select Dictionary→ Off to turn predictive text input off for all editors in the phone.R0915_en.book Page 49 Wednesday, September 15, 2004 12:14 PM

Messaging50Copying text to clipboard1To select letters and words, press and hold . At the same time, press or . As the selection moves, text is highlighted.2To copy the text to clipboard, while still holding , press Copy. 3To insert the text into a document, press and hold , and press Paste. Or, press once, and select Paste. • To select lines of text, press and hold . At the same time press or . • To remove the selected text from the document, press .Writing and sending messagesThe appearance of a multimedia message may vary depending on the receiving device.Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded. Tip! You can start to create a message from any application that has the option Send. Select a file (an image, text) to be added to the message, and select Options→ Send.Before you can create a multimedia message or write an e-mail, you must have the correct connection settings in place. See ‘Receiving MMS and e-mail settings’, p. 52 and ‘Settings for e-mail’, p. 60.1Select New message. A list of message options opens. •Text message - to send a text message. •Multimedia message - to send a multimedia message (MMS).•E-mail - to send an e-mail. If you have not set up your e-mail account, you will be prompted to do so. Tip! Scroll to a contact, and press to mark it. You can mark several recipients at a time.2Press to select recipients from Contacts, or enter the recipient’s phone number or e-mail address. Press to add a semicolon (;) that separates the recipients. You can also copy and paste the number or address from the Clipboard. 3Press to move to the message field.R0915_en.book Page 50 Wednesday, September 15, 2004 12:14 PM

Messaging51 Options in the message editor: Send, Add recipient, Insert, Attachments (e-mail), Preview (MMS), Objects (MMS), Remove (MMS), Delete, Check contacts, Message details, Sending options, Help, and Exit.4Write the message.Note: Your device supports the sending of text messages beyond the normal 160-character limit. If your message exceeds 160 characters, it will be sent as a series of two or more messages and sending may cost you more. In the navigation bar, you can see the message length indicator counting backwards from 160. For example, 10 (2) means that you can still add 10 characters for the text to be sent as two messages. Some characters may take more space than others.•To add a media object to a multimedia message, select Options→ Insert object→ Image, Sound clip or Video clip. When sound is added, the icon is shown in the navigation bar.Tip! When you send a multimedia message to an e-mail address or a device that supports the receiving of large images, use the larger image size. If you are not sure of the receiving device, or the network does not support sending large file, it is recommended that you use a smaller image size or a sound clip that is no longer than 15 seconds. To change the setting, select Options→ Settings→ Multimedia message→ Image size in the Messaging main view.If you select Insert new→ Sound clip, Recorder opens, and you can record a new sound. Press OK, the new sound is automatically saved, and a copy is inserted in the message. Select Options→ Preview to see what the multimedia message looks like.•To add an attachment to an e-mail, select Options→ Attachments→ Insert→ Image, Sound clip, Video clip or Note. E-mail attachments are indicated by in the navigation bar.5To send the message, select Options → Send, or press .Note: E-mail messages are automatically placed in Outbox before sending. If sending does not succeed, the e-mail is left in the Outbox with the status Failed.Tip! In Messaging you can also create presentations and send them in a multimedia message. In Multimedia message editor view, select Options→ Create presentation (shown Fig. 10 Creating a multimedia message.R0915_en.book Page 51 Wednesday, September 15, 2004 12:14 PM

Messaging52only if MMS creation mode is set to Guided or Free). See ‘Settings for multimedia messages’, p. 59.Receiving MMS and e-mail settingsYou may receive the settings in a text message from your network operator or service provider. See ‘Receiving logos, tones, business cards, calendar entries, and settings’, p. 54. For availability of and subscription to data services, please contact your network operator or service provider. Follow the instructions given by your service provider.Entering the MMS settings manually:1Select Tools→ Settings→ Connection→ Access points and define the settings for a multimedia messaging access point. See ‘Connection settings’, p. 99.2Select Messaging→ Options→ Settings→ Multimedia message. Open Access point in use and select the access point you created to be used as the preferred connection. See also ‘Settings for multimedia messages’, p. 59. Tip! To send files other than sounds and notes as attachments, open the appropriate application, and select Send→ Via e-mail, if available.Before you can send, receive, retrieve, reply to, and forward e-mail, you must:• Configure an Internet access point (IAP) correctly. See ‘Connection settings’, p. 99.• Define your e-mail settings correctly. See ‘Settings for e-mail’, p. 60. You need to have a separate e-mail account. Follow the instructions given by your remote mailbox and Internet service provider (ISP).R0915_en.book Page 52 Wednesday, September 15, 2004 12:14 PM

Messaging53Inbox - receiving messages Inbox icons: - unread messages in Inbox, - unread text message, - unread multimedia message, and - data received through Bluetooth.When you receive a message, and the text 1 new message are shown in the standby mode. Press Show to open the message. To open a message in Inbox, scroll to it and press .Receiving multimedia messagesImportant: Multimedia message objects may contain viruses or otherwise be harmful to your device or PC. Do not open any attachment if you are not sure of the trustworthiness of the sender.When you open a multimedia message ( ), you may see an image and a message, and simultaneously listen to a sound through the loudspeaker ( is shown if sound is included). Click the arrow in the icon to listen to the sound.To see what kinds of media objects have been included in the multimedia message, open the message, and select Options→ Objects. You can choose to save a multimedia object file in your phone or send it, for example, through Bluetooth to another compatible device.You may also receive multimedia presentations. You can view these presentations by selecting Options→ Play presentation. Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded.R0915_en.book Page 53 Wednesday, September 15, 2004 12:14 PM

Messaging55My folders Tip! You can use texts in the Templates folder to avoid rewriting messages that you send often.In My folders, you can organise your messages into folders, create new folders, and rename and delete folders.MailboxIf you select Mailbox and have not set up your e-mail account, you are prompted to do so. See ‘Settings for e-mail’, p. 60. When you create a new mailbox, the name you give to the mailbox replaces Mailbox in the Messaging main view. You can have several mailboxes (up to six).Opening the mailboxWhen you open the mailbox, you can choose whether you want to view the previously retrieved e-mail messages and e-mail headings offline or connect to the e-mail server. When you scroll to your mailbox and press , the phone asks you if you want to Connect to mailbox? • Select Yes to connect to your mailbox and retrieve new e-mail headings or messages. When you view messages online, you are continuously connected to a remote mailbox using a packet data connection. See also ‘Essential indicators’, p. 15 and ‘Connection settings’, p. 99.• Select No to view previously retrieved e-mail messages offline. When you view e-mail messages offline, your phone is not connected to the remote mailbox.Retrieving e-mail messagesIf you are offline, select Options→ Connect to start a connection to a remote mailbox.Important: E-mail messages may contain viruses or otherwise be harmful to your device or PC. Do not open any attachment if you are not sure of the trustworthiness of the sender.Fig. 11 Mailbox with different status icons.R0915_en.book Page 55 Wednesday, September 15, 2004 12:14 PM

Messaging561When you have an open connection to a remote mailbox, select Options→ Retrieve e-mail:•New - to retrieve all new e-mail messages to your phone.•Selected - to retrieve only the e-mail messages that have been marked.•All - to retrieve all messages from the mailbox.To stop retrieving messages, press Cancel.2After you have retrieved the e-mail messages, you can continue viewing them online. Or, select Options→ Disconnect to close the connection and view the e-mail messages offline.E-mail status icons: - new e-mail (offline or online mode), the content has not been retrieved to your phone. - new e-mail, the content has been retrieved to your phone. - e-mail message has been read. - e-mail heading that has been read and the message content has been deleted from the phone.3To open an e-mail message, press . If the e-mail message has not been retrieved (arrow in the icon is pointing outwards) and you are offline, you will be asked if you want to retrieve this message from the mailbox.To view e-mail attachments, open a message that has the attachment indicator , and select Options→ Attachments. If the attachment has a dimmed indicator, it has not been retrieved to the phone; select Options → Retrieve. In the Attachments view, you can retrieve, open, or save attachments. You can also send attachments using Bluetooth. Tip! If your mailbox uses the IMAP4 protocol, you can decide whether to retrieve e-mail headers only, or messages partially (kB). With the POP3 protocol, the options are e-mail headers only, partially (kB), or messages and attachments. Deleting e-mail messages• To delete the contents of an e-mail message from the phone while still retaining it in the remote mailbox, select Options→ Delete msg. from:→ Phone only.Note: The phone mirrors the e-mail headings in the remote mailbox. Although you delete the message content, the e-mail heading stays in your phone. If you want to remove the heading as well, you must first delete the e-mail message from your remote mailbox, and then make a connection from your phone to the remote mailbox again to update the status.R0915_en.book Page 56 Wednesday, September 15, 2004 12:14 PM

Messaging57 Tip! To copy an e-mail from the remote mailbox to a folder under My folders, select Options→ Copy to folder. Select a folder from the list, and press OK.• To delete an e-mail from both the phone as well as from the remote mailbox, select Options→ Delete msg. from:→ Phone and server.Note: If you are offline, the e-mail is deleted first from your phone. During the next connection to the remote mailbox, it is automatically deleted from the remote mailbox. If you are using the POP3 protocol, messages marked to be deleted are removed only after you have closed the connection to the remote mailbox.• To cancel deleting an e-mail from both the phone and server, scroll to an e-mail that has been marked to be deleted during the next connection ( ), and select Options→ Undelete.Disconnecting from the mailbox Tip! You can also leave your mailbox connection open and the new e-mails (Headers only as default) will be retrieved from the remote mailbox to your phone automatically (only if IMAP IDLE function is supported by your server). To leave the Messaging application open in the background, press twice. Leaving the connection open may increase your call costs due to the data traffic.When you are online, select Options→ Disconnect to end the packet data connection to the remote mailbox. See also ‘Essential indicators’, p. 15.Viewing e-mail messages when offlineWhen you open Mailbox the next time and you want to view and read the e-mail messages offline, answer No to the Connect to mailbox? query. You can read the previously retrieved e-mail headings or the retrieved e-mail messages or both. You can also write new, reply to, or forward e-mail to be sent the next time you connect to the mailbox. Outbox - messages waiting to be sentOutbox is a temporary storage place for messages waiting to be sent.Status of the messages in Outbox: Sending, Waiting /Queued•Resend at %U (time) - The phone will try to send the message again after a time-out period. Press Send to restart the sending immediately. R0915_en.book Page 57 Wednesday, September 15, 2004 12:14 PM

Messaging58•Deferred - You can set documents to be ‘on hold’ while they are in Outbox. Scroll to a message that is being sent and select Options→ Defer sending. •Failed - The maximum number of sending attempts has been reached. Sending has failed. If you were trying to send a text message, open the message and check that the Sending options are correct. Example: Messages are placed in Outbox, for example, when your phone is outside network coverage. You can also schedule e-mail messages to be sent the next time you connect to your remote mailbox.Viewing messages on a SIM cardBefore you can view SIM messages, you need to copy them to a folder in your phone. 1In the Messaging main view, select Options→ SIM messages.2Select Options→ Mark/Unmark→ Mark or Mark all to mark messages.3Select Options→ Copy. A list of folders opens.4Select a folder and press OK to start copying. Open the folder to view the messages.Messaging settingsSettings for text messages Options when editing text message centre settings: Edit, New msg. centre, Delete, Help, and Exit.Select Messaging→ Options→ Settings→ Text message.•Message centres - Lists all the text message service centres that have been defined.•Msg. centre in use - Select which message centre is used for delivering text messages.•Receive report (network service) - To request the network to send delivery reports on your messages. When set to No, only the Sent status is shown in Log. See ‘Log’, p. 25.•Message validity - If the recipient of a message cannot be reached within the validity period, the message is removed from the text message service centre. The network must R0915_en.book Page 58 Wednesday, September 15, 2004 12:14 PM

Messaging59support this feature. Maximum time is the maximum amount of time allowed by the network.•Message sent as - Change this option only if you are sure that your service centre is able to convert text messages into these other formats. Contact your network operator.•Preferred connection - You can send text messages through the normal GSM network or through packet data, if supported by the network. See ‘Connection settings’, p. 99.•Reply via same ctr. (network service) - Choose Yes, if you want the reply message to be sent using the same text message service centre number.Adding a new text message centre1Select Message centres→ Options→ New msg. centre.2Press , write a name for the service centre, and press OK.3Press and , and write the number of the text message service centre. You receive the number from your service provider. 4Press OK. 5To use the new settings, go back to the settings view. Scroll to Msg. centre in use, and select the new service centre.Settings for multimedia messagesSelect Messaging→ Options→ Settings→ Multimedia message.•Image size - Define the size of the image in a multimedia message. The options are Original (shown only when the MMS creation mode is set to Guided or Free), Small and Large. Selecting Original will increase the size of the multimedia message.•MMS creation mode - If you select Guided, the phone will inform you if you try to send a message that may not be supported by the recipient. By selecting Restricted the phone will prevent you from sending messages that are not supported.•Access point in use (Must be defined) - Select which access point is used as the preferred connection for the multimedia message centre.R0915_en.book Page 59 Wednesday, September 15, 2004 12:14 PM

Messaging60•Recept. in home net.- Select whether you want the reception of the MMS messages in the home network to be Automatic, Defer retrieval or Off. If you have selected Defer retrieval the multimedia messaging centre will save the message. To retrieve the message later, set to Automatic.•Reception if roaming - Select how you want the MMS messages to be retrieved outside the home network.When you are outside your home network, sending and receiving multimedia messages may cost you more. If Reception if roaming→ Automatic has been selected, your phone can automatically make an active packet data connection to retrieve the message.Select Off from Reception if roaming if you do not want to receive multimedia messages when you are outside your home network.•Allow anon. messages - Select No if you want to reject messages coming from an anonymous sender.•Receive adverts - Define whether you want to receive multimedia message advertisements or not.•Receive report (network service) - Set to Yes if you want the status of the sent message to be shown in the Log.Note: Receiving a delivery report of a multimedia message that has been sent to an e-mail address might not be possible.•Deny report sending - Choose Yes if you do not want your phone to send delivery reports of received multimedia messages.•Message validity - If the recipient of a message cannot be reached within the validity period, the message is removed from the multimedia messaging centre. The network must support this feature. Maximum time is the maximum amount of time allowed by the network.Settings for e-mailSelect Messaging→ Options→ Settings→ E-mail, or in the Mailbox main view, select Options→ E-mail settings, and select:R0915_en.book Page 60 Wednesday, September 15, 2004 12:14 PM

Messaging61Mailbox in use - Select which mailbox you want to use for sending e-mail.Mailboxes - Opens a list of mailboxes that have been defined. If no mailboxes have been defined, you will be prompted to do so. Select a mailbox to change the settings:Mailbox settings•Mailbox name - Enter a descriptive name for the mailbox.•Access point in use (Must be defined) - Choose an Internet access point (IAP) for the mailbox. See ‘Connection settings’, p. 99.•My e-mail address (Must be defined) - Enter the e-mail address given to you by your service provider. Replies to your messages are sent to this address.•Outgoing mail server (Must be defined) - Enter the IP address or host name of the mail server that sends your e-mail.•Send message - Define how e-mail is sent from your phone:Immediately - The device starts to establish a connection to the mailbox after you have selected Send message. When conn. avail. - E-mail is sent when the connection to the remote mailbox is available.•User name - Enter your user name, given to you by your service provider.•Password: - Enter your password. If you leave this field blank, you will be prompted for the password when you try to connect to your remote mailbox.•Incoming mail server (Must be defined) - Enter the IP address or host name of the mail server that receives your e-mail.•Mailbox type: - Defines the e-mail protocol that your remote mailbox service provider recommends. The options are POP3 and IMAP4. This setting can be selected only once and cannot be changed if you have saved or exited from the mailbox settings. If you are using the POP3 protocol, e-mail messages are not updated automatically in online mode. To see the latest e-mail messages, you must disconnect and make a new connection to your mailbox.•Security - Used with the POP3, IMAP4, and SMTP protocols to secure the connection to the remote mailbox.R0915_en.book Page 61 Wednesday, September 15, 2004 12:14 PM

Messaging62•APOP secure login (not shown if IMAP4 is selected for Mailbox type) - Used with the POP3 protocol to encrypt the sending of passwords to the remote e-mail server while connecting to the mailbox.User settings•E-mails to retrieve (not shown if the e-mail protocol is set to POP3) - Define how many new e-mails will be retrieved to mailbox.•Retrieve - Define which parts of the e-mails will be retrieved: Headers only, Partially (kB), or Msgs. & attachs. (not shown if the e-mail protocol is set to IMAP4).•Retrieve attachments (not shown if the e-mail protocol is set to POP3) - Choose whether you want to retrieve e-mail with or without attachments.•Subscribed folders (not shown if the e-mail protocol is set to POP3) - You can subscribe other folders in remote mailbox as well and retrieve content from those folders.•Send copy to self - Select Yes to save a copy of the e-mail to your remote mailbox and to the address defined in My e-mail address.•Include signature - Select Yes if you want to attach a signature to your e-mail messages.•My name - Enter your own name here. Your name will replace your e-mail address in the recipient’s phone in case the recipient’s phone is supporting this function.Automatic retrieval•Header retrieval - When this function is on, you can define when and how often the messages will be retrieved from the mailbox.Activating Header retrieval may increase your call costs due to the data traffic.Settings for Web service messagesSelect Messaging→ Options→ Settings→ Service message. Choose whether or not you want to receive service messages. Download messages - Choose Automatically if you want to set the phone to automatically activate the browser and start a network connection to retrieve content when the phone receives a service message.R0915_en.book Page 62 Wednesday, September 15, 2004 12:14 PM

Calendar and To-do64Calendar and To-do Shortcut: Press any key ( - ) in any calendar view. A Meeting entry is opened, and the characters you keyed in are added to the Subject field.Calendar - creating calendar entries1Press and select Calendar. 2Select Options→ New entry: • Meeting to remind you of an appointment that has a specific date and time. • Memo to write a general entry for a day. • Anniversary to remind you of birthdays or special dates. Anniversary entries are repeated every year. Tip! If you are editing or deleting a repeated entry, choose how you want the change to take effect: All occurrences - all repeated entries are deleted / This entry only - only the current entry will be deleted. For example, your weekly class has been cancelled. You have set the calendar to remind you every week. Select This entry only and the calendar will remind you again next week.3Fill in the fields. Use to move between fields.Alarm - Select On and press to fill in the Alarm time and Alarm date fields. Alarm is shown with in the Day view. Stopping a calendar alarm - Press Silence to turn off the calendar alarm tone. The reminder text will stay on the screen. Press Stop to end the calendar alarm. Press Snooze to set the alarm to snooze.Repeat - Press to change the entry to be repeating ( is shown in the Day view).Repeat until - You can set an end date for the repeated entry.Synchronisation - Private- after synchronisation the calendar entry can be seen only by you and it will not be shown to others with online access to view the calendar. Public- the calendar entry is shown to others who have access to view your calendar online. None- the calendar entry will not be copied to your PC when you synchronise.4To save the entry, press Done. Tip! You can send calendar entries to a compatible phone. See the ‘Messaging’ chapter, and ‘Sending data using Bluetooth’, p. 89.R0915_en.book Page 64 Wednesday, September 15, 2004 12:14 PM

Calendar and To-do65Calendar views Tip! Select Options→ Settings to change the view that is shown when you open the calendar or the starting day of the week. Tip! To send a calendar note, select Options→ Send→ Via text message/ Via multimedia/ Via Bluetooth.In the Month view, dates that have calendar entries are marked with a small triangle at the right bottom corner. In the Week view, memos and anniversaries are placed before 8 o’clock.• Icons in Day and Week views: - Memo, and - Anniversary. There is no icon for Meeting.• To go to a certain date, select Options→ Go to date. Write the date, and press OK.• Press to jump to today. Tip! You can move calendar and to-do data from many different Nokia phones to your phone or synchronise your calendar and to-do to a compatible PC using Nokia PC Suite. See the CD-ROM supplied in the sales package.Setting a calendar alarmYou can set an alarm to remind you of a meeting. This option is not available for notes and anniversaries.1Open a note in which you want to set an alarm, and select Alarm→ On.2Set the Alarm time and Alarm date.3Scroll down to Repeat, and press to select how often you want the alarm to be repeated.4Press Done.R0915_en.book Page 65 Wednesday, September 15, 2004 12:14 PM

Calendar and To-do66To delete a calendar alarm, open the note in which you want to delete an alarm, and select Alarm→ Off. Calendar settingsTo modify the Calendar alarm tone, Default view, Week starts on, and Week view title, select Options→ Settings.To-do - task listPress and select Organiser→ To-do to write notes and maintain a task list.• To add a note, press any key to start to write the task in the Subject field.• To set the due date for the task, scroll to the Due date field, and enter a date.• To set the priority for the to-do note, scroll to the Priority field, and press to select the priority. The priority icons are (High) and (Low). There is no icon for Normal.• To mark a task as completed, scroll to it in the To-do list, and select Options→ Mark as done.• To restore a task, scroll to it in the To-do list, and select Options→ Mark as not done.R0915_en.book Page 66 Wednesday, September 15, 2004 12:14 PM

Web67WebVarious service providers maintain pages specifically designed for mobile devices. To access these pages, press and select Web. These pages use the Wireless Markup Language (WML), Extensible Hypertext Markup Language (XHTML), or Hypertext Markup Language (HTML). Check the availability of services, pricing, and tariffs with your network operator or service provider. Service providers will also give you instructions on how to use their services. Accessing the Web• Save the settings that are needed to access the Web page that you want to use. See the sections ‘Receiving browser settings’ or ‘Keying in the settings manually’. • Make a connection to Web. See ‘Making a connection’, p. 69.• Start browsing the pages. See ‘Browsing’, p. 70.• End the connection to Web. See ‘Ending a connection’, p. 72.Receiving browser settings Tip! Settings may be available, for example, on the Web site of a network operator or service provider.You may receive Web service settings in a special text message from the network operator or service provider that offers the Web page. See ‘Receiving logos, tones, business cards, calendar entries, and settings’, p. 54. For more information, contact your network operator or service provider.Keying in the settings manuallyFollow the instructions given to you by your service provider.R0915_en.book Page 67 Wednesday, September 15, 2004 12:14 PM

Web681Select Tools→ Settings→ Connection→ Access points, and define the settings for an access point. See ‘Connection settings’, p. 99. Options in the Bookmarks view: Open, Download, Back to page, Bookmark manager, Mark/Unmark, Navigation options, Advanced options, Send, Find bookmark, Details, Settings, Help and Exit.2Select Web→ Options→ Bookmark manager→ Add bookmark. Write a name for the bookmark and the address of the page defined for the current access point.Bookmarks view Glossary: A bookmark consists of an Internet address (mandatory), bookmark title, access point, and if the Web page requires, a user name and password.Note: Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site. The starting page defined for the default access point. If you use another default access point for browsing, the starting page is changed accordingly. The automatic bookmarks folder contains bookmarks ( ) that are collected automatically when you browse pages. The bookmarks in this folder are automatically organised according to domain. Any bookmark showing the title or Internet address of the bookmark. Shortcut: To start a connection, press and hold in standby mode.Adding bookmarks manually1In the Bookmarks view, select Options→ Bookmark manager→ Add bookmark.2Start to fill in the fields. Only the URL address must be defined. The default access point is assigned to the bookmark if no other one is selected. Press to enter special characters such as /, ., :, and @. Press to clear characters.3Select Options→ Save to save the bookmark.R0915_en.book Page 68 Wednesday, September 15, 2004 12:14 PM

Web69Sending bookmarksScroll to a bookmark, and select Options→ Advanced options→ Send→ Via text message. Press to send. It is possible to send more than one bookmark at the same time.Making a connection Tip! To send a bookmark, scroll to it, and select Options→ Send→ Via text message.Once you have stored all the required connection settings, you can access the pages. 1Select a bookmark or write the address in the Go to field ( ). When you write the address, matching bookmarks are shown at the top of the Go to field. Press to select a matching bookmark. Options when browsing (depend on the page you are viewing): Open, Accept, Remove file, Open in viewer, Open Wallet, Service options, Bookmarks, Save as bookmark, View images, Navigation options, Advanced options, Show images, Send bookmark, Find, Details, Settings, Help, and Exit.2Press to start to download the page.Connection securityIf the security indicator is displayed during a connection, the data transmission between the device and the internet gateway or server is encrypted.The security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server.Select Options→ Details→ Security to view details about the connection, encryptions status, and information about server and user authentication.Security features may be required for some services, such as banking services. For such connections you need security certificates. For more information, contact your service provider. See also ‘Certif. management’, p. 104.R0915_en.book Page 69 Wednesday, September 15, 2004 12:14 PM

Web70BrowsingOn a browser page, new links appear underlined in blue and previously visited links in purple. Images that act as links have a blue border around them.• To open a link, to check boxes, and make selections, press .• To go to the previous page while browsing, press Back. If Back is not available, select Options→ Navigation options→ History to view a chronological list of the pages you have visited during a browsing session. The history list is cleared each time a session is closed.• To retrieve the latest content from the server, select Options→ Navigation options→ Reload.• To save a bookmark, select Options→ Save as bookmark. Tip! To access the Bookmarks view while browsing, press and hold down . To return to the browser view again, select Options→ Back to page.• To save a page while browsing, select Options→ Advanced options→ Save page. You can save pages either to the phone memory or on a memory card, and browse them when offline. To access the pages later, press in the Bookmarks view to open the Saved pages view.• To enter a new URL address, select Options→ Navigation options→ Go to web address.• To open a sublist of commands or actions for the currently open page, select Options→ Service options.• You can download items such as ringing tones, images, operator logos, themes, and video clips. Downloaded items are handled by the respective applications in your phone, for example, a downloaded image is saved in Gallery. Shortcut: Use to jump to the end of a page and to the beginning of a page.Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded.Important: Only install software from sources that offer adequate protection against harmful software.• To download and view new Web service messages while browsing, select Options→ Advanced options→ Read service msgs. (shown only if there are new messages). See also ‘Receiving Web service messages’, p. 54.R0915_en.book Page 70 Wednesday, September 15, 2004 12:14 PM

Web71Viewing saved pagesIf you regularly browse pages containing information which does not change very often, you can save and browse them when offline. In the saved pages view you can also create folders to store your saved browser pages. Options in the Saved pages view: Open, Back to page, Reload, Saved pages, Mark/Unmark, Navigation options, Advanced options, Details, Settings, Help, and Exit.• To open the Saved pages view, press in the Bookmarks view. In the Saved pages view, press to open a saved page ( ).• To save a page, while browsing select Options→ Advanced options→ Save page. • To start a connection to the browser service and to download the latest version of the page, select Options→ Reload. The phone stays online after you reload the page. Tip! Your browser collects bookmarks automatically while you are browsing Web pages. The bookmarks are stored to the Automatic bookmarks folder ( ) and automatically organised according to domain. See also ‘Settings for Web’, p. 72.Downloading and purchasing itemsYou can download items such as ringing tones, images, operator logos, themes, and video clips. These items can be provided free, or you can purchase them. Downloaded items are handled by the respective applications in your phone, for example, a downloaded photo can be saved in Gallery.Important: Only install applications from sources that offer adequate protection against harmful software.1To download the item, scroll to the link, and press . •If the item is provided free, press Accept. Once downloaded, the content is automatically opened in a suitable application.To cancel the download, press Cancel.2Choose the appropriate option to purchase the item, for example, ’Buy’.3Carefully read all the information provided.If the online content is compatible, you can use your wallet information to make the purchase.R0915_en.book Page 71 Wednesday, September 15, 2004 12:14 PM

Web724Select Open Wallet. You will be prompted for your wallet code. See ‘Creating a wallet code’, p. 77.5Select the appropriate card category from your wallet.6Select Fill in. This will upload the selected wallet information.If the wallet does not contain all information necessary for the purchase, you will be requested to enter the remaining details manually.Note: Copyright protections may prevent some images, ringtones and other content from being copied, modified, transferred, or forwarded.Ending a connectionSelect Options→ Advanced options→ Disconnect, or press and hold to quit browsing and to return to the standby mode.Emptying the cacheThe information or services you have accessed are stored in the cache memory of the phone.Note: A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed is stored in the cache memory of the phone. To empty the cache, select Options→ Navigation options→ Clear cache.Settings for WebSelect Options→ Settings:•Default access point - To change the default access point, press to open a list of available access points. See ‘Connection settings’, p. 99.R0915_en.book Page 72 Wednesday, September 15, 2004 12:14 PM

Web73•Show images - To select if you want to load images while browsing or not. If you choose No, you can later load images during browsing by selecting Options→ Show images.•Font size - To choose the text size.•Default encoding - If text characters are not shown correctly, you may choose another encoding according to language.•Automatic bookmarks - To disable automatic bookmark collecting, select Off. If you want to continue collecting automatic bookmarks but hide the folder from the Bookmarks view, select Hide folder.•Screen size - To select what is shown when you are browsing. Select Select. keys only, or Full screen.•Volume - If you want the browser to play sounds embedded on Web pages, select a volume level.•Rendering - If you want the page layout shown as accurately as possible when in Small screen mode, select By quality. If you do not want external cascading style sheets to be downloaded, select By speed. Glossary: Cookies are a means of content providers to identify users and their preferences for frequently used content.•Cookies - To enable or disable the receiving and sending of cookies.•Java/ECMA script - To enable or disable the use of scripts.•Security warnings - To hide or show security notifications.•Conf. DTMF sending - Choose whether you want to confirm before the phone sends DTMF tones during a voice call. See also ‘DTMF tones’, p. 25.•Wallet - On to open the wallet automatically when a compatible browser page is opened. See ‘Wallet’, p. 76.R0915_en.book Page 73 Wednesday, September 15, 2004 12:14 PM

Organiser74OrganiserCalculatorTo add, substract, multiply, divide, calculate square roots and percentages, press and select Organiser→ Calculator.Note: This calculator has limited accuracy and is designed for simple calculations.To save a number in the memory (indicated by M), select Options→ Memory→ Save. To retrieve a number in memory, select Options→ Memory→ Recall. To clear a number in memory, select Options→ Memory→Clear.Calculating percentages1Enter a number for which you want to calculate a percentage.2Select , , , or .3Enter the percentage.4Select .NotesPress and select Organiser→ Notes to write notes. You can send notes to other compatible devices and plain text files (TXT format) that you receive can be saved to Notes. Go to - adding shortcutsR0915_en.book Page 74 Wednesday, September 15, 2004 12:14 PM

Organiser75Default shortcuts: opens Calendar, opens Inbox and opens Notes.To store shortcuts, links to your favourite images, notes, bookmarks, and so on, press and select Organiser→ Go to. Shortcuts can be added only from the individual applications, like Gallery. Not all applications have this function.1Select an item from an application to which you want to add a shortcut.2Select Add to 'Go to'. A shortcut in Go to is automatically updated if you move the item to which it is pointing, for example, from one folder to another.• To change the identifier in the lower left corner of the shortcut icon, select Options→ Shortcut icon.Deleting a shortcutSelect the shortcut and press . The default shortcuts Notes, Calendar, and Inbox cannot be deleted.When you remove an application or a document which has a shortcut in the Go to, the shortcut icon of the removed item will be dimmed in the Go to view. The shortcut can be deleted next time you try to open the shortcut.Converter - converting measures Options in Converter: Select unit/ Change currency, Conversion type, Currency rates, Help, and Exit.To convert measures such as Length from one unit (Yards) to another (Metres), press and select Organiser→ Converter.Note that the Converter has limited accuracy, and rounding errors may occur.1Scroll to the Type field, and press to open a list of measures. Scroll to the measure you want to use, and press OK.2Scroll to the first Unit field, and press . Select the unit from which you want to convert, and press OK. Scroll to the next Unit field, and select the unit to which you want to convert.3Scroll to the first Amount field, and enter the value you want to convert. The other Amount field changes automatically to show the converted value.R0915_en.book Page 75 Wednesday, September 15, 2004 12:14 PM

Organiser76Press to add a decimal and for the +, - (for temperature), and E (exponent) symbols.Setting a base currency and exchange rates Tip! To change the conversion order, enter the value in the second Amount field. The result is shown in the first Amount field.Before you can make currency conversions, you need to choose a base currency and add exchange rates. The rate of the base currency is always 1. The base currency determines the conversion rates of the other currencies.1Select Currency→ Options→ Currency rates. A list of currencies opens, and you can see the current base currency at the top.2To change the base currency, scroll to the currency, and select Options→ Set as base curr.. Tip! To rename a currency, go to the Currency rates view, scroll to the currency, and select Options→ Rename currency.Note: When you change base currency, you must key in the new rates because all previously set exchange rates are set to zero. 3Add exchange rates. Scroll to the currency, and key in a new rate, that is, how many units of the currency equal one unit of the base currency you have selected.After you have inserted all the necessary exchange rates, you can make currency conversions.Wallet Press and select Organiser→ Wallet. Wallet provides you with a storage area for your personal information, such as credit and debit card numbers, addresses and other useful data, for example, user names and passwords.The information stored in the wallet can be retrieved while browsing to automatically fill in online forms on browser pages, for example, when the service asks for credit card details. Data in the wallet is encrypted and protected with a wallet code that you define.R0915_en.book Page 76 Wednesday, September 15, 2004 12:14 PM

Organiser77Wallet will automatically close after 5 minutes. Enter the wallet code to regain access to the contents. You can change this automatic time-out period if required. See ‘Wallet settings’, p. 79. Options in the wallet main view: Open, Settings, Help, and Exit.Creating a wallet codeEach time you open the wallet you will be prompted for a wallet code. Enter the code that you have created, and press OK.When you open the wallet for the first time, you must create your own wallet code:1Enter a code of your choice (4-10 alphanumeric characters), and press OK.2You will be prompted to verify the code. Enter the same code, and press OK. Do not give your wallet code to anyone else.If you enter the wallet code incorrectly on three consecutive occasions, the wallet application is blocked for five minutes. The block time increases if further incorrect wallet codes are entered.If you forget your wallet code, you will have to reset the code, and you will lose all information stored in the wallet. ‘Resetting the wallet and wallet code’, p. 79.Storing personal card details1Select the Cards category from the main wallet menu, and press .2Select a type of card from the list, and press .•Payment cards - Credit and debit cards.•Loyalty cards - Membership and store cards.•Online acc. cards - Personal user names and passwords to online services.•Address cards - Basic contact details for home/office.•User info cards - Customised personal preferences for online services.3Select Options→ New card. An empty form opens. 4Fill in the fields, and press Done.R0915_en.book Page 77 Wednesday, September 15, 2004 12:14 PM

Organiser80To reset both the contents of the wallet and the wallet code:1Enter *#7370925538# in the standby mode.2Enter the phone lock code, and press OK. See ‘Security’, p. 102.When opening the wallet again, you must enter a new wallet code. ‘Creating a wallet code’, p. 77.R0915_en.book Page 80 Wednesday, September 15, 2004 12:14 PM

IM - Instant Messaging (chat)81IM - Instant Messaging (chat)Press and select Tools→ IM.Instant messaging is a network service which allows you to converse with other people using instant messages and join discussion forums (IM groups) with specific topics. Various service providers maintain IM servers that you can log in to once you have registered to an IM service. Options in the IM main view: Open, Login/ Logout, Settings, Help, Exit.Note: Check the availability of chat services, pricing, and tariffs with your network operator and/or service provider. Service providers will also give you instructions on how to use their services. Receiving IM settings Tip: To log in automatically when you start IM, without having to enter your user ID and password each time, select Options→ Settings→ Server settings→ IM login type→ Automatic.You must save the settings to access the service that you want to use. You may receive the settings in a special text message, a so-called smart message, from the network operator or service provider that offers the IM service. See ‘Receiving logos, tones, business cards, calendar entries, and settings’, p. 54. You can also enter the settings manually. See ‘Chat server settings’, p. 87.Connecting to an IM server1Open IM to have your phone connect to the IM server in use. To change the IM server in use and save new IM servers, see ‘Chat server settings’, 87. Once the connection has been established:R0915_en.book Page 81 Wednesday, September 15, 2004 12:14 PM

IM - Instant Messaging (chat)822Enter your user ID and password, and press to log in. You obtain the user ID and password for IM server from your service provider.You can select Cancel to stay offline; to log in to the IM server later, select Options→ Login. You cannot send or receive messages while you are offline. 3To log out, select Options→ Logout.Modifying your IM settingsSelect Options→ Settings→ IM settings: Options in the Conversations list: Open, Delete, Add to IM contacts, New conversation, Set auto reply on, Blocking options, End conversation, Login, Settings, Help, Exit.•Use screen name (shown only if IM groups supported by the server) - To enter a nickname (up to10 characters), select Yes.•IM presence - To allow others to see if you are online, select Active for all.•Allow messages from - To allow messages from all, select All.•Allow invitations from - To allow invitations only from your IM contacts, select IM contacts only. IM invitations are sent by IM contacts who want you to join their groups.•Message speed - To select the speed at which new messages are displayed.•Sort IM contacts - To sort your IM contacts Alphabetically or By online status.•Availability reloading - To choose how to update information about whether your IM contacts are online or offline, select Automatic or Manual. Searching for IM groups and users• To search for groups, in the IM groups view, select Options→ Search→ Groups. You can search by Group name, Topic, and Members (user ID).• To search for users, in the IM contacts view, select Options→ Search→ Users. You can search by User's name, User ID, Phone number, and E-mail address.R0915_en.book Page 82 Wednesday, September 15, 2004 12:14 PM

IM - Instant Messaging (chat)83Joining and leaving an IM group• To join a IM group that you have saved, scroll to the group, and press .• To join an IM group not on the list, but for which you know the group ID, select Options→ Join group. Enter the group ID, and press .• To leave the IM group, select Options→ Leave IM group.ChattingOnce you have joined an IM group, you can view the messages that are exchanged there, and send your own messages. Options while chatting: Send, Send private msg., Reply, Forward, Insert smiley, Send invitation, Leave IM group, Add to banned list, IM group, Record convers./ Stop recording, Help, and Exit.• To send a message, write the message in the message editor field, and press .• To send a private message to participant, select Options→ Send private msg., select the recipient, write the message, and press . To reply to a private message sent to you, select the message and select Options→ Reply.• To invite IM contacts who are online to join the IM group, select Options→ Send invitation, select the contacts you want to invite, write the invitation message, and press .• To prevent receiving messages from certain participants, select Options→ Blocking options and select:•Add to blocked list - to block messages from the currently selected participant.•Add ID to list manually - to enter the user ID of the participant. Enter the ID and press .•View blocked list - to see the participants whose messages are being blocked.•Unblock - to select the user that you want to remove from the blocked list. Press .R0915_en.book Page 83 Wednesday, September 15, 2004 12:14 PM

IM - Instant Messaging (chat)84Recording chats Options in the Recorded chats view: Open, Delete, Send, Mark/Unmark, Login/ Logout, Settings, Help, Exit. • To record to a file the messages that are exchanged during a conversation or while you are joined in a IM group, select Options→ Record convers., enter a name for the conversation file, and press . To stop recording, select Options→ Stop recording.The recorded conversation files are automatically saved in the Recorded chats.• To view the recorded chats, in the main view, select Recorded chats, select the conversation and press .Viewing and starting conversations Options when viewing a conversation: Send, Add to IM contacts, Insert smiley, Forward, Record convers./ Stop recording, Blocking options, End conversation, Help, ExitGo to the Conversations view to see a list of the individual conversation participants that you have an ongoing conversation with.To view a conversation, scroll to a participant, and press .• To continue the conversation, write your message and press .• To return to the conversations list without closing the conversation, press Back.• To close the conversation, select Options→ End conversation. Ongoing conversations are automatically closed when you exit Chat.To start a new conversation, select Options→ New conversation:•Select recipient - To see a list of your chat contacts that are currently online. Scroll to the contact that you want to start a conversation with, and press . Glossary: The user ID is provided by the service provider to those who register to this service.•Enter user ID - To enter the user ID of the user you want to start a conversation with, and press .To save a conversation participant to your IM contacts, scroll to the participant and select Options→ Add to IM contacts.To send automatic replies to incoming messages, select Options→ Set auto reply on. Enter the text and press Done. You can still receive messages.R0915_en.book Page 84 Wednesday, September 15, 2004 12:14 PM

IM - Instant Messaging (chat)85IM contactsGo to the IM contacts to retrieve chat contact lists from the server, or to add a new chat contact to a contact list. When you log in to the server, the previously used chat contact list will be retrieved from the server automatically.• To create a new contact, select Options→ New IM contact→ Enter manually. Fill in the Nickname and User ID fields, and press Done.• To move a contact from a list on the server to the retrieved list, select Options→ New IM contact→ Move from other list. Options in the IM contacts view: Open conversation, Open, Change contact list, Reload user availab., Belongs to groups, New IM contact, Move to other list, Edit, Delete, Switch tracking on, Blocking options, Login / Logout, Settings, Help, and Exit.• To change the chat contact list, select Options→ Change contact list.• Select Options:•Open conversation - To start a new conversation or continue an ongoing conversation with the contact.•Switch tracking on - To have the phone notify you every time the chat contact goes online or offline.•Belongs to groups - To see which groups the chat contact has joined.•Reload user availab. - To update information about whether the contact is online or offline. The online status is shown by an indicator next to the contact name. This option is not available if you have set the Availability reloading to Automatic in IM settings.Managing IM groups Options in the IM groups view: Open, Join group, Create new group, Leave IM group, IM group, Search, Login/ Logout, Settings, Help, and Exit.Go to the IM groups view to see a list of the IM groups that you have either saved or are currently joined to. Scroll to a group, and select Options→ IM group:•Save group - To save an unsaved group that you are currently joined to.•View members - To see who are currently joined to the group.R0915_en.book Page 85 Wednesday, September 15, 2004 12:14 PM

IM - Instant Messaging (chat)86•IM details - To see the group ID, topic, participants, administrators of the group (shown only if you have the editing rights), the list of banned participants (shown only if you have the editing rights), and whether whispering is allowed in the group.•IM group settings - To view and edit the chat group settings. See ‘Creating a new IM group’, p 86.Administrating an IM groupCreating a new IM groupSelect IM groups→ Options→ Create new group. Enter the settings for the group.You can edit the settings for an IM group if you have administrator rights to the group. The user who creates a group is automatically given administrator rights to it.•Group name -, Group topic -,•Welcome note - To add a note that the participants see when they join the group, •Group size - To define the maximum number of members allowed to join the group, •Allow search - ,•Editing rights - To define the chat group participants to whom you want to give administration rights permission to invite contacts to join the IM group and edit the group settings. •Group members - See ‘Adding and removing group members’, p. 87.•Banned list - Enter the participants that are not allowed to join the IM group. •Allow private msgs. - To allow messaging between selected participants only. •Group ID - The group ID is created automatically and cannot be changed.R0915_en.book Page 86 Wednesday, September 15, 2004 12:14 PM

IM - Instant Messaging (chat)87Adding and removing group members• To add members to a group, select IM groups, scroll to an IM group, and select Options→ IM group→ IM group settings→ Group members→ Selected only or All IM contacts.• To remove a member from the IM group, scroll to the member, and select Options→ Remove. To remove all members, select Options→ Remove all.Chat server settingsSelect Options→ Settings→ Server settings. You may receive the settings in a special text message from the network operator or service provider that offers the chat service. You obtain the user ID and password from your service provider, when you register to the service. If you do not know your user ID or password, contact your service provider.• To change the IM server to which you wish to connect, select Default server.• To add a new server to your list of IM servers, select Servers→ Options→ New server. Enter the following settings:•Server name - Enter the name for the chat server.•Access point in use - Select the access point you want to use for the server.•Web address - Enter the URL address of the IM server.•User ID - Enter your user ID.•Password - Enter your login password.R0915_en.book Page 87 Wednesday, September 15, 2004 12:14 PM

Connectivity89Bluetooth settings•Bluetooth - On/Off•My phone's visibility - Shown to all: your phone can be found by other Bluetooth devices, or Hidden: your phone cannot be found by other devices. Icons for different Bluetooth devices: - Computer - Phone - Audio/video - Headset - Other•My phone's name - Define a Bluetooth name for your phone. After you have set Bluetooth to be active and changed My phone's visibility to Shown to all, your phone and this name can be seen by other Bluetooth device users.Sending data using BluetoothThere can be only one active Bluetooth connection at a time.1Open an application where the item you wish to send is stored. For example, to send an image to another compatible device, open the Gallery application.2Select the item, for example an image, and select Options→ Send→ Via Bluetooth. Tip! When searching for devices, some Bluetooth devices may show only the unique Bluetooth addresses (device addresses). To find the unique Bluetooth address of your phone, enter the code *#2820# in the standby mode.The phone starts to search for devices within range. Bluetooth enabled devices that are within range start to appear on the display one by one. You can see a device icon, the Bluetooth name of the device, the device type, or a short name.Tip! If you have searched for Bluetooth devices earlier, a list of the devices that were found previously is shown first. To start a new search, select More devices. If you switch off the phone, the list is cleared.•To interrupt the search, press Stop. The device list freezes and you can start to form a connection to one of the devices already found.3Scroll to the device with which you want to connect, and press Select.4 Pairing (if required by the other device)Glossary: Pairing means authentication. The users of the Bluetooth enabled devices should agree what the passcode is and use the same passcode for both devices in order to pair them. Devices that do not have a user interface have a factory-set passcode.•If the other device requires pairing before data can be transmitted, a tone sounds and you are asked to enter a passcode.R0915_en.book Page 89 Wednesday, September 15, 2004 12:14 PM

Connectivity90•Create your own passcode (1-16 characters long, numeric) and agree with the owner of the other Bluetooth device to use the same code. The passcode is used only once. Tip! To send text using Bluetooth (instead of text messages), go to Notes, write the text, and select Options→ Send→ via Bluetooth.•After pairing, the device is saved to the Paired devices view.When the connection has been established, the note Sending data is shown.The Drafts folder in Messaging does not store messages sent using Bluetooth.Checking the status of the Bluetooth connection• When is shown in the standby mode, Bluetooth is active.• When is blinking, your phone is trying to connect to the other device.• When is shown continuously, the Bluetooth connection is active.Pairing devices Tip! To define a short name (nickname or alias), scroll to the device and select Options→ Assign short name in the Paired devices view. This name helps you to recognise a certain device during device search or when a device requests a connection.Paired devices are easier to recognise, they are indicated by in the device search. In the Bluetooth main view, press to open the Paired devices view ( ).• To pair with a device, select Options→ New paired device. The phone starts a device search. Scroll to the device, and press Select. Exchange passcodes, see step 4 (Pairing), p. 89.• To cancel a pairing, scroll to the device, and select Options→ Delete. If you want to cancel all pairings, select Options→ Delete all.Tip! If you are currently connected to a device and delete the pairing with that device, pairing is removed immediately, but the connection remains active.• To set a device to be authorised or unauthorised, scroll to a device, and select Options:Set as authorised - Connections between your phone and this device can be made without your knowledge. No separate acceptance or authorisation is needed. Use this status for your own devices, such as your compatible Bluetooth headset or PC, or devices that belong to someone you trust. The icon is added next to authorised devices in the Paired devices view.R0915_en.book Page 90 Wednesday, September 15, 2004 12:14 PM

Connectivity91Set as unauthorised - Connection requests from this device need to be accepted separately every time.Receiving data using BluetoothWhen you receive data using Bluetooth, a tone sounds, and you are asked if you want to accept the Bluetooth message. If you accept, is shown, and the item is placed in the Inbox folder in Messaging. Bluetooth messages are indicated by . See ‘Inbox - receiving messages’, p. 53.Switching off BluetoothTo switch off Bluetooth, select Bluetooth→ Off.PC connections - using Bluetooth or USBYou can use your phone with a variety of PC connectivity and data communications applications. With Nokia PC Suite you can, for example, synchronise contacts, calendar and To-do notes between your phone and a compatible PC. For further information on how to install Nokia PC Suite (compatible with Windows 2000 and Windows XP), see the User’s Guide for Nokia PC Suite and the Nokia PC Suite help in the ‘Install’ section on the CD-ROM.Using the CD-ROMThe CD-ROM should launch after you have inserted it into the CD-ROM drive of a compatible PC. If not, proceed as follows: Open Windows Explorer, right-click the CD-ROM drive where you inserted the CD- ROM, and select AutoPlay.R0915_en.book Page 91 Wednesday, September 15, 2004 12:14 PM

Connectivity92Using your phone as a modemYou can use your phone as a modem to send and receive e-mails, or to connect to the Internet with a compatible PC by using a Bluetooth connection, or a data cable. Detailed installation instructions can be found in the User’s Guide for Nokia PC Suite in Modem options on the CD-ROM.Connection managerYou may have multiple data connections active at the same time when you are using your phone in GSM and UMTS networks. Press and select Connectivity→ Conn. mgr. to view the status of multiple data connections, view details on the amount of data sent and received, and end connections. When you open Connection manager, you can see a list of: Options in the Connection manager main view when there are one or more connections: Details, Disconnect, Disconnect all, Help and Exit.• open data connections: data calls ( ), and packet data connections ( )• the status of each connection• the amount of data uploaded and downloaded for each connection (shown for packet data connections only)• the duration of each connection (shown for data calls only). Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding off for billing, and so forth.• To end a connection, scroll to a connection, and select Options→ Disconnect.• To close all currently open connections, select Options→ Disconnect all.Viewing data connection detailsTo view the details of a connection, scroll to a connection, and select Options→ Details.•Name - The name of the Internet access point (IAP) in use, or ’Modem connection’ if the connection is a dial-up connection.R0915_en.book Page 92 Wednesday, September 15, 2004 12:14 PM

Connectivity93•Bearer - The type of data connection: Data call, High sp. GSM, or Packet data.•Status - The current status of the connection: Connecting, Conn.(inact.), Conn.(active), On hold, Disconnctng., or Disconnected.•Received - The amount of data, in bytes, received to the phone.•Sent - The amount of data, in bytes, sent from the phone.•Duration - The length of time that the connection has been open.•Speed - The current speed of both sending and receiving data in %U kB/s (kilobytes per second).•Name - Access point name used or Dial-up - the dial-up number used.•Shared (not shown if the connection is not shared) - The number of applications using the same connection.Sync - remote synchronisationPress and select Sync. The Sync application enables you to synchronise your calendar, and contacts with various calendar and address book applications on a compatible computer or on the Internet.The synchronisation application uses SyncML technology for synchronisation. For information on SyncML compatibility, please contact the supplier of the calendar or address book application you want to synchronise your phone data with.You may receive Sync settings in a special text message. See ‘Receiving logos, tones, business cards, calendar entries, and settings’, p. 54. R0915_en.book Page 93 Wednesday, September 15, 2004 12:14 PM

Tools98Message text - Write a text to be sent in a text message when you reject a call.Image in vid. call - You can deny video sending when you receive a video call. Select a still image to be displayed instead of video. Tip! To change the settings for call diverting, press and select Tools→ Settings→ Call divert. See ‘Call diverting’, p. 106.Automatic redial - Select On, and your phone will make a maximum of ten attempts to connect the call after an unsuccessful call attempt. Press to stop automatic redialling.Summary after call - Activate this setting if you want the phone to briefly display the approximate duration of the last call.Speed dialling - Select On, and the numbers assigned to the speed dialling keys ( - ) can be dialled by pressing and holding the key. See also ‘Speed dialling a phone number’, p. 22.Anykey answer - Select On, and you can answer an incoming call by briefly pressing any key, except , , , and . Tip! To switch between the phone lines, press and hold in standby mode.Line in use (network service) - This setting is shown only if the SIM card supports two subscriber numbers, that is, two phone lines. Select which phone line you want to use for making calls and sending text messages. Calls on both lines can be answered irrespective of the selected line. If you select Line 2 and have not subscribed to this network service, you will not be able to make calls. When line 2 is selected, is shown in the standby mode. If you have two phone lines, the divert indicator for the first line is and for the second .Line change (network service) - To prevent line selection, select Line change→ Disable if supported by your SIM card. To change this setting, you need the PIN2 code.R0915_en.book Page 98 Wednesday, September 15, 2004 12:14 PM

Tools99Connection settingsData connections and access pointsYour phone supports packet data connections ( ), such as GPRS in the GSM network. See also ‘Essential indicators’, p. 15. To establish a data connection, an access point is required. You can define different kinds of access points, such as: • MMS access point to, for example, send and receive multimedia messages, Glossary: GPRS, General Packet Radio Service, uses packet data technology where information is sent in short packets of data over the mobile network.• access point for the Web application to view WML or XHTML pages, and • Internet access point (IAP) to, for example, send and receive e-mail. Check the kind of an access point you need with your service provider for the service you wish to access. For availability and subscription to packet data connection services, contact your network operator or service provider.Packet data connections in GSM and UMTS networksWhen you are using your phone in GSM and UMTS networks it is possible to have multiple data connections active at the same time; access points can share a data connection; and data connections remain active (for example, during voice calls). For information on how to see how many data connections are active, see ‘Connection manager’, p. 92. See also network indicators in ‘Essential indicators’, p. 15. The following indicators may replace the signal indicator, depending on which network you are using: - GSM network, packet data is available in the network. - GSM network, packet data connection is active, data is being transferred. - GSM network, multiple packet data connections are active. - GSM network, packet data connection is on hold. (This can happen during a voice call, for example.) - UMTS network, packet data is available in the network.R0915_en.book Page 99 Wednesday, September 15, 2004 12:14 PM

Tools100 - UMTS network, packet data connection is active, data is being transferred. - UMTS network, multiple packet data connections are active.Receiving access point settingsYou may receive access point settings in a text message from a service provider, or you may have preset access point settings in your phone. See ‘Receiving logos, tones, business cards, calendar entries, and settings’, p. 54.• To create a new access point, select Tools→ Settings→ Connection→ Access points.An access point may be set to be protected ( ) by your network operator or service provider. Protected access points cannot be edited or deleted.Access points Options in the Access points list: Edit, New access point, Delete, Help, and Exit.Follow the instructions given to you by your service provider.Connection name - Give a descriptive name for the connection.Data bearer - Depending on what data connection you select, only certain setting fields are available. Fill in all fields marked with Must be defined or with a red asterisk. Other fields can be left empty, unless you have been instructed otherwise by your service provider. Options when editing access point settings: Change, Advanced settings, Help, and Exit.To be able to use a data connection, the network service provider must support this feature, and if necessary, activate it for your SIM card.Access point name (for packet data only) - The access point name is needed to establish a connection to the packet data and UMTS networks. You obtain the access point name from your network operator or service provider.R0915_en.book Page 100 Wednesday, September 15, 2004 12:14 PM

Tools101 Tip! See also ‘Receiving MMS and e-mail settings’, p. 52, ‘Settings for e-mail’, p. 60, and ‘Accessing the Web’, p. 67.User name - The user name may be needed to make a data connection, and is usually provided by the service provider. The user name is often case-sensitive.Prompt password - If you must enter a new password every time you log in to a server, or if you do not want to save your password in the phone, choose Yes.Password - A password may be needed to make a data connection, and is usually provided by the service provider. The password is often case-sensitive.Authentication - Normal or Secure.Homepage - Depending on what you are setting up, write either the Web address, or the address of the multimedia messaging centre.Select Options→ Advanced settings to change the following settings: Glossary: DNS - Domain Name Service. An Internet service that translates domain names such as www.nokia.com into IP addresses like 192.100.124.195Network type - Select the Internet protocol type to be used: IPv4 settings or IPv6 settings.Phone IP address - The IP address of your phone. Name servers - Primary name server: The IP address of the primary DNS server, Second. Name server: The IP address of the secondary DNS server. Contact your Internet service provider to obtain these addresses.Proxy serv. address - Define the address for the proxy server.Proxy port number - Enter the proxy port number.Packet data (GPRS)The packet data settings affect all access points using a packet data connection.Packet data conn. - If you select When available and you are in a network that supports packet data, the phone registers to the packet data network. Also, starting an active packet data connection is quicker (for example, to send and receive e-mail). If you select When needed, the phone uses a packet data connection only if you start an application or action that needs it. If there is no packet data coverage and you have chosen When available, the phone will periodically try to establish a packet data connection.R0915_en.book Page 101 Wednesday, September 15, 2004 12:14 PM

Tools102Access point - The access point name is needed to use your phone as a packet data modem to your computer.ConfigurationsYou may receive trusted server settings from your network operator or service provider in a configuration message, or the settings may be stored on your SIM or USIM card. These settings can be saved to your phone and viewed or deleted in Configurations.Date and time Tip! See also the Language settings, p. 96. See ‘Clock settings’, p. 16.SecurityPhone and SIMPIN (Personal Identification Number) code (4 to 8 digits) protects your SIM card against unauthorised use. The PIN code is usually supplied with the SIM card. After three consecutive incorrect PIN code entries, the PIN code is blocked, and you need to unblock it before you can use the SIM card again. See the information about PUK code in this section.UPIN code may be supplied with the USIM card. The USIM card is an enhanced version of the SIM card and is supported by UMTS mobile phones. The UPIN code protects the USIM card against unauthorised use.PIN2 code (4 to 8 digits) supplied with some SIM cards, is required to access some functions in your phone.Lock code (5 digits) can be used to lock the phone to avoid unauthorised use. The factory setting for the lock code is 12345. To avoid unauthorised use of your phone, change the lock code. Keep the new code secret and in a safe place separate from your phone.R0915_en.book Page 102 Wednesday, September 15, 2004 12:14 PM

Tools104connection. In this case, the message centre number and the recipient’s phone number have to be included on the fixed dialling list.Note: When security features that restrict calls are in use (such as call barring, closed user group and fixed dialling) calls still may be possible to the official emergency numbers programmed into your phone.Closed user group (network service) - To specify a group of people to whom you can call and who can call you.Confirm SIM services (network service) - To set the phone to display confirmation messages when you are using a SIM card service.Certif. managementDigital certificates do not guarantee safety; they are used to verify the origins of software.In the Certificate management main view, you can see a list of authority certificates that have been stored in your phone. Press to see a list of personal certificates, if available. Glossary: Digital certificates are used to verify the origin of the XHTML or WML pages and installed software. However, they can only be trusted if the origin of the certificate is known to be authentic. Digital certificates should be used if you want to connect to an online bank or another site or remote server for actions that involve transferring confidential information. They should also be used if you want to reduce the risk of viruses or other malicious software and be sure of the authenticity of software when downloading and installing software.Important: Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime. If Expired certificate or Certificate not valid yet is shown even if the certificate should be valid, check that the current date and time in your phone are correct.Viewing certificate details - checking authenticityR0915_en.book Page 104 Wednesday, September 15, 2004 12:14 PM

Tools105You can only be sure of the correct identity of a server when the signature and the period of validity of a server certificate have been checked. You will be notified on the phone display if the identity of the server is not authentic or if you do not have the correct security certificate in your phone. Options in the certificate management main view: Certificate details, Delete, Trust settings, Mark/Unmark, Help, and Exit.To check certificate details, scroll to a certificate, and select Options→ Certificate details. When you open certificate details, Certificate management checks the validity of the certificate, and one of the following notes may appear:•Certificate not trusted - You have not set any application to use the certificate. See ‘Changing the trust settings’, p. 105.•Expired certificate - The period of validity has ended for the selected certificate.•Certificate not valid yet - The period of validity has not yet begun for the selected certificate.•Certificate corrupted - The certificate cannot be used. Contact the certificate issuer.Changing the trust settingsBefore changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner.Scroll to an authority certificate, and select Options→ Trust settings. Depending on the certificate, a list of the applications that can use the selected certificate is shown. For example:•Symbian installation: Yes - The certificate is able to certify the origin of new Symbian operating system application.•Internet: Yes - The certificate is able to certify servers. •App. installation: Yes - The certificate is able to certify the origin of new Java application.Select Options→ Edit trust setting to change the value.R0915_en.book Page 105 Wednesday, September 15, 2004 12:14 PM

Tools106Call divertingIcon: When all calls are diverted, is shown in the standby mode.1To direct your incoming calls to your voice mailbox or another phone number, press and select Tools→ Settings→ Call divert. For details, contact your service provider.2Select which calls you want to divert: Voice calls, or Data and video calls.3Select the desired divert option. For example, If busy to divert voice calls when your number is busy or when you reject incoming calls.4Set the divert option on (Activate) or off (Cancel), or check whether the option is activated (Check status). Several divert options can be active at the same time. Call barring and call diverting cannot be active at the same time.Call barring (network service)Call barring allows you to restrict the calls that can be made or received with the phone. To change the settings, you need the barring password from your service provider. Select the desired barring option, and set it on (Activate) or off (Cancel), or check whether the option is active (Check status). Call barring affects all calls, including data calls. Call barring and call diverting cannot be active at the same time.When calls are barred, calls still may be possible to certain official emergency numbers.NetworkNokia 6630 can automatically switch between the GSM and UMTS networks. The GSM network is indicated with in the standby mode. The UMTS network is indicated with .R0915_en.book Page 106 Wednesday, September 15, 2004 12:14 PM

Tools1082Select Options → Add voice tag. See ‘Adding a voice tag to a phone number’, p. 30.Application managerPress and select Tools→ Manager. You can install two types of applications and software to your phone:• J2ME™ applications based on Java™ technology with the extension .jad or .jar ( ). Do not download PersonalJava™ applications to your phone as they cannot be installed. Example: If you have received the installation file as an e-mail attachment, go to your mailbox, open the e-mail, open the Attachments view, scroll to the installation file, and press to start installation.• Other applications and software suitable for the Symbian operating system ( ). The installation files have the .sis extension.Installation files may be transferred to your phone from a compatible computer, downloaded during browsing, or sent to you in a multimedia message, as an e-mail attachment, or using Bluetooth. You can use Nokia Application Installer in Nokia PC Suite to install an application to your phone or a memory card. If you are using Microsoft Windows Explorer to transfer a file, place the file on a memory card (local disk).Installing applications and softwareIcons: - .sis application - Java application - application is not fully installed - application is installed on the memory card.Important: Only install applications from sources that offer adequate protection against harmful software. • Before installation, select Options→ View details to view information such as the application type, version number, and the supplier or manufacturer of the application.• Before installation, select Options→ View certificate to display the security certificate details of the application. See ‘Certif. management’, p. 104.• If you install a file that contains an update or repair to an existing application, you can only restore the original application if you have the original installation file or a full back-up copy of the removed software package. To restore the original application, remove the application, and install the application again from the original installation file or the back-up copy.R0915_en.book Page 108 Wednesday, September 15, 2004 12:14 PM

Tools109 Tip! You can also use Nokia Application Installer available in Nokia PC Suite to install applications. See the CD-ROM supplied in the sales package.• The .jar file is required for installing Java applications. If it is missing, the phone may ask you to download it. If there is no access point defined for the application, you will be asked to select one. When you are downloading the .jar file, you may need to enter a user name and password to access the server. You obtain these from the supplier or manufacturer of the application.1Open Application manager, and scroll to an installation file. Alternatively, search the phone memory or the memory card, select the application, and press to start the installation.2Select Options→ Install. Tip! While browsing, you can download an installation file and install it without closing the connection.During installation, the phone shows information about the progress of the installation. If you are installing an application without a digital signature or certification, the phone displays a warning. Continue installation only if you are sure of the origins and contents of the application. Options in the Applications main view: Install, View details, Go to Web address, View certificate, Send, Remove, App. downloads, View log, Send log, Update, Settings, Help, and Exit.• To start an installed application, scroll to it, and press .• To start a network connection and to view extra information about the application, scroll to it, and select Options→ Go to web address, if available.• To see what software packages have been installed or removed and when, select Options→ View log.• To send your installation log to a help desk so that they can see what has been installed or removed, select Options→ Send log→ Via text message, Via multimedia, Via Bluetooth, or Via e-mail (available only if the correct e-mail settings are in place).Removing applications and softwareScroll to a software package, and select Options→ Remove. Press Yes to confirm.If you remove software, you can only re-install it if you have the original software package or a full back-up of the removed software package. If you remove a software package, you may no longer be able to open documents created with that software. R0915_en.book Page 109 Wednesday, September 15, 2004 12:14 PM

Tools110Note: If another software package depends on the software package that you removed, the other software package may stop working. Refer to the documentation of the installed software package for details.Application settings•Software installation - Select the kind of software you want installed: On, Signed only, or Off.•Online certif. check - Select if you want Application manager to check the online certificates for an application before installing it.•Default web address - Default address used when checking online certificates.Some Java applications may require a phone call, a message to be sent, or a network connection to be made to a specific access point for downloading extra data or components. In the Applications main view, scroll to an application, and select Options→ Suite settings to change settings related to that specific application.Activation keys - handling copyright protected filesCopyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded.Press and select Tools→ Activation keys to view the digital rights activation keys stored in your phone.• Valid keys ( ) are connected to one or more media file.• With expired keys ( ) you have run out of time to use the media file, or the time period for using the file is exceeded. To view the Expired activation keys, press . • To buy more usage time or extend the usage period for a media file, select an activation key, and select Options→ Activate content. Activation keys cannot be updated if Web service message reception is disabled. See ‘Settings for Web service messages’, p. 62.R0915_en.book Page 110 Wednesday, September 15, 2004 12:14 PM

Battery information113Battery informationCharging and DischargingYour device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, buy a new battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device.Always switch the device off and disconnect the charger before removing the battery. Unplug the charger from the electrical plug and the device when not in use. Do not leave the battery connected to a charger. Overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time. Temperature extremes can affect the ability of your battery to charge.Use the battery only for its intended purpose. Never use any charger or battery that is damaged.Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object.Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing.Do not dispose of batteries in a fire! Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste.CARE AND MAINTENANCEYour device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage.• Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it.• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.• Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.R0915_en.book Page 113 Wednesday, September 15, 2004 12:14 PM

ADDITIONAL SAFETY INFORMATION114• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.• Do not attempt to open the device other than as instructed in this guide.• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.• Do not paint the device. Paint can clog the moving parts and prevent proper operation.• Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity sensor, and light sensor lenses).• Use only the supplied or an approved replacement antenna. Unauthorised antennas, modifications, or attachments could damage the device and may violate regulations governing radio devices.All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service.ADDITIONAL SAFETY INFORMATIONOperating environmentRemember to follow any special regulations in force in any area and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions.This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 5/8 inch (1.5 cm) away from the body. When a carry case, belt clip or holder is used for body-worn operation, it should not contain metal and should position the device the above-stated distance from your body.In order to transmit data files or messages, this device requires a good quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Ensure the above separation distance instructions are followed until the transmission is completed.Medical devicesOperation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.Pacemakers Pacemaker manufacturers recommend that a minimum separation of 6 in. (15.3 cm) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers should:R0915_en.book Page 114 Wednesday, September 15, 2004 12:14 PM

ADDITIONAL SAFETY INFORMATION115• always keep the device more than 6 in. (15.3 cm) from their pacemaker when the device is switched on;• not carry the device in a breast pocket; and • hold the device to the ear opposite the pacemaker to minimise the potential for interference.If you have any reason to suspect that interference is taking place, switch off your device immediately.Hearing aids Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, air bag systems. For more information, check with the manufacturer or its representative of your vehicle or any equipment that has been added.Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal.Potentially explosive environmentsSwitch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refuelling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas, chemical plants or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust or metal powders.Emergency callsImportant: Wireless phones, including this device, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. R0915_en.book Page 115 Wednesday, September 15, 2004 12:14 PM

ADDITIONAL SAFETY INFORMATION117can be found on the FCC's website at http://www.fcc.gov/oet/fccid by searching the equipment authorization system using FCC ID: PDNRM-1.R0915_en.book Page 117 Wednesday, September 15, 2004 12:14 PM

118IndexAaccess points 99settings 100activation keys 110alarmsalarm clock 16calendar alarms 64applications, Java 108Bbluetoothconnecting two devices, pairing 89connection requests 89connection status indicators 90device address 89device icons 89factory set passcode 89headset 107pairing requests 89pairing, glossary explanation 89passcode, glossary explanation 89switching off 91bookmark, glossary explanation 68brightnessdisplay 97setting in camera 34Ccacheclearing 72calendaralarm 64sending entries 64stopping a calendar alarm 64synchronising PC Suite 65call registersee logcallsdialled numbers 25duration 25international 21received 25settings 97settings for call divert 106transferring 24cameraadjusting brightness 34adjusting contrast 34night mode 34saving video clips 36self-timer 35sending images 34sequence mode 34video recorder settings 36CD-ROM 91certificates 104chatsee instant messagingclear screenSee standby modeclockalarm 16settings 16snooze 16codes 102lock codePIN code 102PIN2 code 102computer connections 91conference call 23connection settings 99contact cardsinserting pictures 28storing DTMF tones 25contrastsetting in camera 34copyingcontacts between the SIM card and device memory 29text 50copyright protectionR0915_en.book Page 118 Wednesday, September 15, 2004 12:14 PM

119see activation keyscutting text 50Ddata connectionsdetails 92ending 92indicators 15datesettings 102digital rights management, DRMsee activation keysDNS, domain name service, glossary explanation 101Eediting videos 39adding effects 39adding sound clips 39adding transitions 39custom video clips 39e-mail 50offline 57opening 56remote mailbox 55retrieving from mailbox 55settings 60viewing attachments 56Ffile formatsJAD fileJAR file 109RealOne Player 42SIS file 108file manager 17fixed dialling 103Ggallery 37Hhandsfreesee loudspeakerheadset settings 107Iindicators 15instant messaging 81blocking 83connecting to a server 81groups 85individual conversations 84recording the messages 84sending a private message 83sending instant messages 83user ID, glossary explanation 84internet access points (IAP)See access pointsIP address, glossary explanation 101JJavaSee applications, JavaLlock code 102log erasing contents 27filtering 27log duration 27loopset settings 107loudspeaker 17activating 17turning off 17Mmailbox 55media filesfast forward 44file formats 42mute sound 44rewind 44memoryclearing memory 25, 26viewing memory consumption 18memory card 19password 19unlocking 20memory card adaptersee the Quick Start Guide, reduced-size MultiMediaCard adaptermenurearranging 12messaginge-mail 50R0915_en.book Page 119 Wednesday, September 15, 2004 12:14 PM

120multimedia message 50text message 50movies, muveescustom muvees 41quick muvees 40multimedia messages 50mute sound 44Ppacket data connections 92GPRS, glossary explanation 99settings 101pasting text 50PC connectionsvia Bluetooth or USB cable 91PC Suitecalendar data 65synchronisation 91transfering images to a PC 38viewing phone memory data 18personalisation 13PIN code 102Rrecording video 37recording voice tags 30, 107reminderSee calendar, alarmremote mailbox 55resolution, glossary explanation 35ringing tonesadding a personal ringing tone 30receiving in a text message 54removing a personal ringing tone 30RSMMC, reduced-size MMCsee the Quick Start GuideSsecurity codesee lock codesendingcalendar entries 64contact cards, business cards 29images 34video clips 40service commands 47settingsaccess codes 102access points 100bluetooth 89calendar 65call barring 106call diverting 106certificates 104data connections 99date and time 102display 97headset 107IM settings 81, 82, 87language 96lock code 102loopset 107original settings 96personalising the phone 11PIN code 102screen saver 97UPIN code 102UPUK code 103wallet 79wallet code 103shortcutscamera 34see the Quick Start Guideweb connection 68SIM cardcopying names and numbers to phone 29messages 58names and numbers 29SIS file 108SMS centre, short message service centre 59snoozealarm clock 16calendar alarm 64softwaretransferring a file to your device 108sound clips 37soundsmuting a ringing tone 23personalising 12R0915_en.book Page 120 Wednesday, September 15, 2004 12:14 PM

121recording sounds 42speed dialling 22standby mode 11synchronisation 93Ttext message 50text message service centreadding new 59thumbnail imagesin a contact card 28timesettings 102transfering content from another phone 111UUPIN code 102UPUK code 103USB cable 91USIM cardsee glossary explanation in the Quick Start GuideUSSD commands 47Vvideo call 21answering 24rejecting 24video clips 37video playerSee RealOne Playervideo recordersee cameravoice dialling 30, 107voice mailbox 21changing the phone number 21diverting calls to voice mailbox 106voice messages 21voice tags 30, 107adding 30, 107making calls 31volume control 17during a call 21loudspeaker 17Wwallet 76entering the wallet code 77resetting wallet code 79settings 79storing card details 77viewing ticket details 79wallet code 77, 103webaccess points, see access pointsR0915_en.book Page 121 Wednesday, September 15, 2004 12:14 PM

Navigation menu