Microsoft RA-6 Quad Band GSM/WCDMA Cellular Phone User Manual User Guide

Microsoft Mobile Oy Quad Band GSM/WCDMA Cellular Phone User Guide

Contents

User Guide

Nokia Exx User Guide9251041Issue 1file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 1 Jan 8, 2007 1:39:30 PM
DECLARATION OF CONFORMITYHereby, NOKIA CORPORATION declares that this RA-6 product is in compliance with the essential requirements andother relevant provisions of Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found atwww.nokia.com/phones/declaration_of_conformity/.© 2007 Nokia. All rights reserved.Nokia, Nokia Connecting People, Nokia Care, Eseries and Exx are trademarks or registered trademarks of Nokia Corporation. Nokia tune is a sound markof Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokiais prohibited.This product includes software licensed from Symbian Software Ltd © 1998-2006. Symbian and Symbian OS are trademarks of SymbianLtd.US Patent No 5818437 and other pending patents. T9 text input software Copyright © 1997-2006. Tegic Communications, Inc. All rights reserved. Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information whichhas been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use inconnection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information,including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See http://www.mpegla.com.Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in thisdocument without prior notice.TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY LOSSOF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS ORIMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATIONTO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIMEWITHOUT PRIOR NOTICE.The availability of particular products and applications and services for these products may vary by region. Please check with your Nokia dealer fordetails, and availability of language options.Export controlsfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 2 Jan 8, 2007 1:39:30 PM
This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contraryto law is prohibited.FCC/INDUSTRY CANADA NOTICEYour device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or IndustryCanada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local servicefacility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmfulinterference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes ormodifications not expressly approved by Nokia could void the user's authority to operate this equipment.Model number: Exx-19251041/Issue 1file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 3 Jan 8, 2007 1:39:30 PM
ContentsFor your safety..............................................................7About your device....................................................................8Network services......................................................................8Enhancements, batteries, and chargers............................9Basic information about your device..................10Welcome...................................................................................10Switch from cover use to communicator.......................10Menu key, scroll key, and Chr key......................................11Menu..........................................................................................11Common actions in several applications........................12Standby modes.......................................................................12Write text with the cover keypad.....................................13Volume control.......................................................................15Profiles .....................................................................................15Themes .....................................................................................15Memory.....................................................................................16Help and tutorial....................................................................17Settings wizard ......................................................................18Nokia PC Suite.........................................................................18Transfer content between devices ......................19Telephone....................................................................21Answer a call...........................................................................21Make a call................................................................................21Make a conference call.........................................................22Video calls................................................................................22Video sharing..........................................................................23Net calls ....................................................................................231-touch dialing ......................................................................25Call forward settings.............................................................25Call restriction.........................................................................26Send touch tones...................................................................26Voice mail ................................................................................27Log .................................................................................28Monitor all communications..............................................28Log settings.............................................................................28Messaging ...................................................................29Organize messages...............................................................29Message reader......................................................................30Text messages........................................................................30Multimedia messages...........................................................31E-mail messages.....................................................................32Special messages...................................................................35Instant messaging ................................................................36Service messages...................................................................37Messaging settings................................................................38Contacts .......................................................................42Copy contacts between SIM and devicememory.....................................................................................42Manage contacts....................................................................42Manage contact groups.......................................................43Add ringing tones for contacts..........................................43Business cards.........................................................................43Calendar .......................................................................45Contentsfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 4 Jan 8, 2007 1:39:30 PM
Create calendar entries........................................................45To-do entries...........................................................................45Calendar views........................................................................46Clock ..............................................................................47Alarm clock...............................................................................47World clock..............................................................................47Clock settings..........................................................................47Office applications.....................................................48File manager ..........................................................................48Search .......................................................................................48Calculator .................................................................................49Nokia Team Suite ..................................................................49Quickoffice ..............................................................................50Active notes ............................................................................51Converter .................................................................................51PDF reader ...............................................................................52Zip manager ...........................................................................52Print ..........................................................................................52Wireless keyboard ................................................................53Notes .........................................................................................53Connectivity.................................................................55Modem .....................................................................................55Cable connection ...................................................................55Connection manager ...........................................................56Bluetooth .................................................................................56SIM access profile...................................................................59Infrared ....................................................................................60Internet access points..........................................................60Wireless local area network...................................63See WLAN availability...........................................................63WLAN connections.................................................................63WLAN wizard ..........................................................................64WLAN access points...............................................................64Set up an internet access point for WLANmanually...................................................................................65WLAN settings.........................................................................65Web ...............................................................................66Access points...........................................................................66Browse the web.....................................................................66Bookmarks...............................................................................66End a connection....................................................................67Clear the cache........................................................................67Web settings...........................................................................67Global Positioning System (GPS) ..........................68Maps ..........................................................................................68GPS data ...................................................................................70Landmarks ..............................................................................71Business voice applications....................................72Push to talk .............................................................................72Recorder ..................................................................................73Voice aid ..................................................................................74Speech ......................................................................................74Voice commands ...................................................................75Media applications....................................................77RealPlayer ................................................................................77Music player ............................................................................78Flash player .............................................................................79Camera .....................................................................................79Gallery .......................................................................................81Radio .........................................................................................82Contentsfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 5 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 5 Jan 8, 2007 1:39:30 PM
Settings ........................................................................83General settings.....................................................................83Telephone settings................................................................85Connection settings..............................................................86Application settings..............................................................89Device and data management..............................90Back up data............................................................................90Remote configuration .........................................................90Application manager ...........................................................90Activation keys ......................................................................91Data synchronization ..........................................................91Barcode reader ......................................................................92Download! ...............................................................................92Security.........................................................................93Fixed dialing............................................................................93Certificate manager...............................................................93Security modules...................................................................94Memory card security...........................................................94Lock the device.......................................................................94Shortcuts.......................................................................96Glossary.........................................................................98Battery information................................................102Nokia battery authentication guidelines.........103Authenticate hologram.....................................................103What if your battery is not authentic?.........................104Care and maintenance...........................................105Disposal..................................................................................105Additional safety information.............................107Small children.......................................................................107Operating environment.....................................................107Medical devices....................................................................107Vehicles...................................................................................108Potentially explosive environments..............................108Emergency calls....................................................................108CERTIFICATION INFORMATION (SAR)................................109Index............................................................................111Contentsfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 6 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 6 Jan 8, 2007 1:39:30 PM
For your safetyRead these simple guidelines. Not following them maybe dangerous or illegal. Read the complete user guidefor further information.SWITCH ON SAFELYDo not switch the device on when wirelessphone use is prohibited or when it may causeinterference or danger.ROAD SAFETY COMES FIRSTObey all local laws. Always keep your handsfree to operate the vehicle while driving.Your first consideration while driving shouldbe road safety.INTERFERENCEAll wireless devices may be susceptible tointerference, which could affectperformance.SWITCH OFF IN HOSPITALSFollow any restrictions. Switch the device offnear medical equipment.SWITCH OFF IN AIRCRAFTFollow any restrictions. Wireless devices cancause interference in aircraft.SWITCH OFF WHEN REFUELINGDo not use the device at a refueling point. Donot use near fuel or chemicals.SWITCH OFF NEAR BLASTINGFollow any restrictions. Do not use the devicewhere blasting is in progress.USE SENSIBLYUse only in the normal position as explainedin the product documentation. Do not touchthe antenna unnecessarily.QUALIFIED SERVICEOnly qualified personnel may install or repairthis product.ENHANCEMENTS AND BATTERIESUse only approved enhancements andbatteries. Do not connect incompatibleproducts.WATER-RESISTANCEYour device is not water-resistant. Keep itdry.BACK-UP COPIESRemember to make back-up copies or keepa written record of all important informationstored in your device.CONNECTING TO OTHER DEVICESWhen connecting to any other device, readits user guide for detailed safety instructions.Do not connect incompatible products.7For your safetyfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 7 Jan 8, 2007 1:39:30 PM
EMERGENCY CALLSEnsure the phone function of the device isswitched on and in service. Press the end keyas many times as needed to clear the displayand return to the standby mode. Enter theemergency number, then press the call key.Give your location. Do not end the call untilgiven permission to do so.About your deviceThe wireless device described in this guide is approvedfor use on the GSM 850/900/1800/1900, WCDMA 2100network. Contact your service provider for moreinformation about networks.When using the features in this device, obey all lawsand respect local customs, privacy and legitimate rightsof others, including copyrights.Copyright protections may prevent some images, music(including ringing tones), and other content from beingcopied, modified, transferred, or forwarded.Your device supports internet connections and othermethods of connectivity. Like computers, your devicemay be exposed to viruses, malicious messages andapplications, and other harmful content. Exercisecaution and open messages, accept connectivityrequests, download content, and accept installationsonly from trustworthy sources. To increase the securityof your device, consider installing antivirus softwarewith a regular update service and using a firewallapplication.Warning: To use any features in this device, otherthan the alarm clock, the device must be switched on.Do not switch the device on when wireless device usemay cause interference or danger.The office applications support common features ofMicrosoft Word, PowerPoint, and Excel (Microsoft Office2000, XP, and 2003). Not all file formats can be viewedor modified.Network servicesTo use the phone you must have service from a wirelessservice provider. Many of the features require specialnetwork features. These features are not available onall networks; other networks may require that youmake specific arrangements with your service providerbefore you can use the network services. Your serviceprovider can give you instructions and explain whatcharges will apply. Some networks may havelimitations that affect how you can use networkservices. For instance, some networks may not supportall language-dependent characters and services.Your service provider may have requested that certainfeatures be disabled or not activated in your device. Ifso, these features will not appear on your device menu.Your device may also have a special configuration suchas changes in menu names, menu order, and icons.Contact your service provider for more information.This device supports WAP 2.0 protocols (HTTP and SSL)that run on TCP/IP protocols. Some features of thisdevice, such as e-mail, browsing, multimedia messages,8For your safetyfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 8 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 8 Jan 8, 2007 1:39:30 PM
and content downloading, require network support forthese technologies.Enhancements, batteries,and chargersAlways switch the device off and disconnect the chargerbefore removing the battery.Check the model number of any charger before use withthis device. This device is intended for use whensupplied with power from the AC-4 and DC-4 chargers.Warning: Use only batteries, chargers, andenhancements approved by Nokia for use with thisparticular model. The use of any other types mayinvalidate any approval or warranty, and may bedangerous.For availability of approved enhancements, pleasecheck with your dealer. When you disconnect the powercord of any enhancement, grasp and pull the plug, notthe cord.9For your safetyfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 9 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 9 Jan 8, 2007 1:39:30 PM
Basic information about your deviceNote: Your service provider may have requestedthat certain features be disabled or not activated inyour device. If so, they do not appear on your devicemenu. Your device may also have been speciallyconfigured for your network provider. Thisconfiguration may include changes in menu names,menu order and icons. Contact your service provider formore information.Model number: Nokia Exx-1.Hereinafter referred to as Nokia Exx Communicator.An extended version of this user guide is available onthe Nokia web site.WelcomeSelect > {No display_text mapping for'qtn_apps_help_grid.menu_diy', locale='en'} >Welcome.When you switch on your device for the first time, theWelcome application opens. Select from the following:•Tutorial provides information about your device andshows you how to use it. See "Tutorial" on page 18.•Transfer enables you to transfer content, such ascontacts and calendar entries, from a compatibleNokia device. See "Transfer content between devices" on page 19.•Settings wizard helps you configure various settings.See "Settings wizard " on page 18.•Demo contains a link to a presentation of the devicefeatures.•Operator contains a link to your operator's homeportal.Switch from cover use tocommunicatorThe applications and functions on the cover of yourdevice are the same as on the communicator. If you usean application on the cover, and then open thecommunicator, the application shows on thecommunicator display in the same status as it was onthe cover. The cover display switches off. If you switchback to the cover use, press on the cover for a fewseconds to open a list of active applications. Select theapplication you were using. If you want the applicationto continue automatically on the cover, select >Tools > Settings > General > Personalization >Display > {No display_text mapping for'qtn_set_display_cover_to_desk.gsdisplplugindelta',locale='en'} > {No display_text mapping for'qtn_set_display_desk_off.gsdisplplugindelta',locale='en'}.Some applications contain a preview pane when theyare viewed from the communicator display. The10Basic information about your devicefile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 10 Jan 8, 2007 1:39:30 PM
preview pane is for viewing only; you cannot select oropen items from it.If you have an active phone or net call and switch fromcover use to communicator, the loudspeaker activatesautomatically. When you close the communicator, theloudspeaker is muted and the audio comes through theearpiece. If you have an active video call and use thecover phone, the camera on the back of the device isused. When you open the communicator, the cameraon the communicator is used.Menu key, scroll key, andChr keyTo access the applications in your device, press themenu key . To return to the menu from anapplication, leaving the application open in thebackground, press . Press and hold to see a list ofapplications that are open in the background. Leavingapplications running in the background increases thedemand on battery power and reduces the battery life.Use the scroll key to move and make selections. Withthe scroll key, you can move up, down, left, and right inthe menu or in different applications or lists. Press thescroll key to open applications, files, or edit settings.When writing text, press the Chr key to open a list ofspecial characters. Use the scroll key to move in the listand select a character.To add accented characters, press and hold the Chr keyand simultaneously press another key, such as A or E, asmany times as is needed before the character you wantis shown.MenuThe menu is a starting point from which you can openall applications in the device or on a memory card. Themenu contains applications and folders, which aregroups of similar applications.All applications you install in the device yourself are bydefault saved in the Installat. folder.To open an application, scroll to it, and press the scrollkey.To view the applications in a list, select Options >Change view > {No display_text mapping for'qtn_menu_view_list.appshelltheme', locale='en'}. Toreturn to the grid view, select Options > Changeview > {No display_text mapping for'qtn_menu_view_grid.appshelltheme', locale='en'}.To view the memory consumption of differentapplications and data stored on the device or memorycard and to check the amount of free memory, selectOptions > Memory details.To create a new folder, select Options > New folder.You cannot create folders inside folders.To rename a new folder, select Options > Rename.To rearrange the folder, scroll to the application youwant to move, and select Options > Move. A check markis placed beside the application. Scroll to a new location,and select OK.11Basic information about your devicefile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 11 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 11 Jan 8, 2007 1:39:30 PM
To move an application to a different folder, scroll tothe application you want to move to another folder, andselect Options > Move to folder, the new folder, andOK.To download applications from the web, selectOptions > Download applications.Common actions in severalapplicationsYou can find the following actions in severalapplications:To change the profile, or switch off or lock the device,press the power key briefly.If an application consists of several tabs, open a tab byscrolling right or left.To save the settings that you have configured in anapplication, select Back.To save a file, select Options > Save. There are differentsaving options depending on the application you use.To send a file, select Options > Send. You can send afile in an e-mail or multimedia message, or usingBluetooth connectivity or infrared.To copy, press and hold the shift key, and select the textwith the scroll key. Press and hold the shift key, andselect Copy. To paste, scroll to where you want to pastethe text, press and hold the shift key, and select Paste.This method may not work in applications that havetheir own copy and paste commands.To select different items, such as messages, files, orcontacts, scroll to the item you want to select. SelectOptions > Mark/Unmark > Mark to select one item orOptions > Mark/Unmark > Mark all to select all items.To select an object (for example, an attachment in adocument) scroll to the object so that square markersappear on each side of the object.Standby modesYour device has two different standby modes: activestandby mode and standby mode.Active standbyAfter you have switched on your device and it is readyfor use, but you have not entered any characters ormade other selections, the device is in the activestandby mode. In the active standby mode, you canview different indicators such as network operatorindicators or indicators for alarms, and applications youwant to access fast.To select applications that you want to access fromactive standby, select > Tools > Settings >General > Personalization > Standby mode > Activestandby apps..To change the functions of the selection keys in activestandby, select > Tools > Settings > General >Personalization > Standby mode > Shortcuts.To use the basic standby mode, select > Tools >Settings > General > Personalization > Standbymode > Active standby > Off.12Basic information about your devicefile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 12 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 12 Jan 8, 2007 1:39:30 PM
Tip: To see the messages in a messaging foldersuch as Inbox or mailbox in the active standbymode, select > Messaging > Options >Settings > Other and the folders in {Nodisplay_text mapping for'qtn_mce_settings_gen_active_idle.mcesettings_diy', locale='en'}.StandbyIn the basic standby mode, you can see your serviceprovider, time, and different indicators, such asindicators for alarms.To view the most recently dialed numbers, press the callkey. Scroll to a number or name, and press the call keyagain to call the number.To call your voice mailbox (network service), press andhold 1.To view calendar information, scroll right.To write and send text messages, scroll left.To change these shortcuts, select > Tools >Settings > General > Personalization > Standbymode > Shortcuts.News tickerSelect > Tools > Settings > General >Personalization > Standby mode > News ticker. Selectyour news service and select On. This setting is onlyavailable if in you have selected Standby mode > Activestandby > On.The news ticker (network service) displays the newspushed to your device using cell broadcast. You canselect channels from which the news is displayed. Toview the latest news in a separate Latest news view,scroll to the area where the news text is scrolling acrossthe display, and press the scroll key. You can read amaximum of 10 news clips. If there are 10 news clipsalready in the device and a new one arrives, it replacesthe oldest clip.News channelsTo subscribe or unsubscribe to a news channel, openthe Latest news view and select Options > Settings >Subscribed channels. The web page provided by yourservice provider opens.To view news from specific channels or to change thenews channel, open the Latest news view and selectOptions > Channels.To disable the news ticker, open the Latest news viewand select Options, your service, and Off.Write text with the coverkeypadTraditional text input is shown on the top right of the display when youare writing text using traditional text input. and indicate the selected case. indicates that the first letter of the sentence is written13Basic information about your devicefile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 13 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 13 Jan 8, 2007 1:39:30 PM
in uppercase and all the other letters are automaticallywritten in lowercase. indicates the number mode.To write text with the keypad, press a number key 1–9 repeatedly until the desired character appears. Thereare more characters available for a number key than areprinted on the key. If the next letter is located on thesame key as the present one, wait until the cursorappears, and enter the letter.To insert a number, press and hold the number key.To switch between the letter and number mode, pressand hold #.To erase a character, press the clear key. Press and holdthe clear key to clear more than one character.To access the most common punctuation marks, pressthe 1 key. Press 1 repeatedly to reach the desiredpunctuation mark.To add special characters, press *. Scroll to the desiredcharacter and press the scroll key.To insert a space, press 0. To move the cursor to the nextline, press 0 three times.To switch between the different character cases, press#.To select text, press and hold # and scroll right or left.Predictive text input1. To activate predictive text input, press # twicequickly. This activates predictive text input for alleditors in the device. The indicator is shownon the display.2. To write the desired word, press 2–9. Press each keyonly once for one letter.3. When you have finished writing the word and it iscorrect, scroll right to confirm it, or press 0 to add aspace.If the word is not correct, press * repeatedly to viewthe matching words the dictionary has found.If the ? character is shown after the word, the wordyou intended to write is not in the dictionary. To adda word to the dictionary, select Spell, enter the word(up to 32 letters) using traditional text input, andselect OK. The word is added to the dictionary. Whenthe dictionary is full, the new word replaces theoldest added word.Write the first half of a compound word; to confirm it,scroll right. Write the last part of the compound word.To complete the compound word, press 0 to add aspace.To switch predictive text input off for all editors in thedevice, press # twice quickly.Change the writing languageWhen you are writing text, you can change the writinglanguage. For example, if you press the 6 key repeatedlyto reach a specific character, changing the writinglanguage gives you access to characters in a differentorder.If you are writing text using a non-Latin alphabet andwant to write Latin characters, for example e-mail orweb addresses, you may need to change the writinglanguage. To change the writing language, select14Basic information about your devicefile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 14 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 14 Jan 8, 2007 1:39:30 PM
Options > Writing language, and a writing languagethat uses Latin characters.Volume controlWarning: Do not hold the device near your earwhen the loudspeaker is in use, because the volumemay be extremely loud.To adjust the earpiece volume during a phone call, scrollleft or right.To adjust the volume when using the loudspeaker,press Chr + or Chr + on the communicator.To adjust the volume of Music player or the radio, scrollleft or right.Profiles Important: In the offline profile you cannot makeor receive any calls, or use other features that requirecellular network coverage. Calls may still be possible tothe official emergency number programmed into yourdevice. To make calls, you must first activate the phonefunction by changing profiles. If the device has beenlocked, enter the lock code.Select > Tools > Profiles.You can adjust and customize the ringing tones, alerttones, and other device tones for different events,environments, or caller groups. The profile currently inuse is shown at the top of the display in the standbymode. However, if the active profile is Normal, onlytoday's date is shown.The Offline profile prevents your device fromaccidentally switching on, sending or receivingmessages, or using wireless LAN, Bluetooth, GPS, or FMradio; it also closes any internet connection that maybe in operation when the profile is selected. The Offlineprofile does not prevent you from establishing awireless LAN or Bluetooth connection at a later time, orfrom restarting the GPS or FM radio, so comply with anyapplicable safety requirements when establishing andusing these features.Tip: To change the profile in any view, press thepower key briefly. Select the profile you wantto activate.To create a new profile, select Options > Create new,and define the settings.To customize a profile, select a profile and Options >Customize.To change a profile, select a profile and Options >Activate. If you select the Offline profile, you cannotsend or receive messages.To delete a profile that you created, select Options >Delete profile. You cannot delete the predefinedprofiles.Themes Select > Tools > Themes.With Themes, you can change the look of the display ofyour device, such as the background image and colors.15Basic information about your devicefile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 15 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 15 Jan 8, 2007 1:39:30 PM
To change the theme used in all applications, select theGeneral folder.To change the theme for a particular application, selectthe application-specific folder.To change the background image for the standby mode,select the Wallpaper folder.To select an image or write a text for the screen saver,select the Power saver folder.MemoryThere are two types of memory into which you can savedata or install applications: device memory andremovable memory.The device memory is a dynamic memory pool sharedby many applications. The amount of internal memoryavailable varies but cannot be increased past themaximum factory setting. Data stored on the device,such as software applications, images, and music,consume the device memory.Removable memory is a data storage that is not builtinto your device, such as a SIM card or a memory card.A SIM card stores information about the networkoperator and contacts, for example. A memory cardserves as an external storage for software applications,images, music, contacts, text, or any other form ofelectronic data. High-capacity memory cards areavailable.To see how much memory is currently in use, how muchfree memory remains, and how much memory isconsumed by each data type, select > Options >Memory details > Phone memory or Memory card.Tip: To ensure that you have adequatememory, delete or transfer data regularly to amemory card or computer.Memory card Select > Tools > Memory.Your Nokia device supports the FAT16 and FAT32 filesystem for memory cards. If you use a memory cardfrom another device or if you want to ensurecompatibility of the memory card with your Nokiadevice, you may need to format the memory card withyour Nokia device. Formatting a memory card destroysall data saved on the card.You can insert and remove a memory card withoutremoving the battery or powering off the device. Do notremove the memory card when the card is beingaccessed. Removing the card in the middle of anoperation may damage the memory card as well as thedevice, and data stored on the card may be corrupted.If you cannot use a memory card in your device, youmay have the wrong type of memory card, the card maynot be formatted for your device, or the card has acorrupted file system.MicroSDUse only compatible microSD cards approved by Nokiafor use with this device. Nokia uses approved industrystandards for memory cards, but some brands may notbe fully compatible with this device. Incompatible cards16Basic information about your devicefile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 16 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 16 Jan 8, 2007 1:39:30 PM
may damage the card and the device and corrupt datastored on the card.This device uses a microSD memory card.To ensure interoperability, use onlycompatible microSD cards with this device.Check the compatibility of a microSD card with itsmanufacturer or provider. Other memory cards thanmicroSD cards are not compatible with this device.Using an incompatible memory card may damage thememory card as well as the device, and data stored onthe incompatible card may be corrupted.Use a memory cardTo eject the memory card safely, select Options >Remove memory card.To format a memory card for your device, selectOptions > Format memory card. When a memory cardis formatted, all data on the card is lost permanently.Consult your retailer to find out if you must format thememory card before you can use it.To change the name of the memory card, selectOptions > Memory card name.You can protect a memory card with a password toprevent unauthorized access. To set a password, selectOptions > Set password. The password can be up toeight characters long and is case-sensitive. Thepassword is stored in your device. You do not need toenter it again while you use the memory card in thesame device. If you use the memory card in anotherdevice, you are asked for the password. Not all memorycards support password protection.To remove the memory card password, select Options >Remove password. When you remove the password,the data on the memory card is not protected againstunauthorized use.To open a locked memory card, select Options > Unlockmemory card. Enter the password.To check the memory consumption of applications anddata, select Options > Memory details.Help and tutorialYou can find answers to your questions while using thedevice even with no user guide present, because yourdevice includes both a task-specific help and a tutorial.Device help To read instructions for the current view of the openapplication, select Options > Help.To browse the help topics and conduct searches,select > {No display_text mapping for'qtn_apps_help_grid.menu_diy', locale='en'} > {Nodisplay_text mapping for'qtn_apps_help_grid.menu_diy', locale='en'}. You canselect categories for which you want to see instructions.Select a category, such as Messaging, to see whatinstructions (help topics) are available. While you arereading the topic, scroll left or right to see the othertopics in that category.To switch between the application and help, press andhold .17Basic information about your devicefile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 17 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 17 Jan 8, 2007 1:39:30 PM
Tutorial Select > {No display_text mapping for'qtn_apps_help_grid.menu_diy', locale='en'} >Tutorial.The tutorial provides you information about yourdevice and shows you how to use it.Settings wizard Select > Tools > Sett. wizard.Settings wizard configures your device for operator(MMS, GPRS, and internet), e-mail, push-to-talk(network service), and video sharing (network service)settings based on your network operator information.To use these services, you may have to contact yourservice provider to activate a data connection or otherservices.If Settings wizard is not available from your wirelessservice provider, it may not appear in the menu of yourdevice. For more information on the availability ofSettings wizard, contact your service provider or dealer.The availability of the different settings items inSettings wizard depends on the features of the device,SIM card, wireless service provider, and the availabilityof the data in the Settings wizard database.To start the wizard, select Start. When you use thewizard for the first time, you are guided through thesettings configuration. If there is no SIM card inserted,you need to select the home country of your wirelessservice provider, and your service provider. If thecountry or service provider suggested by the wizard isnot correct, select the correct one from the list. If thesettings configuration is interrupted, the settings arenot defined. After closing the wizard, you can start touse the configured applications.To access the main view of the Settings wizard after thewizard has finished the settings configuration, selectOK.If you are not able to use Settings wizard, visit the Nokiaphone settings web site at www.nokia.com.Nokia PC SuiteYou can install Nokia PC Suite from the DVD or from theweb. Nokia PC Suite can be used only with Windows2000 and Windows XP. With Nokia PC Suite, you canmake backups, synchronize your device with acompatible computer, move files between your deviceand a compatible computer, or use your device as amodem.18Basic information about your devicefile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 18 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 18 Jan 8, 2007 1:39:30 PM
Transfer content between devices Select > Tools > Transfer.You can transfer content, such as contacts, from acompatible Nokia device to your Nokia ExxCommunicator using Bluetooth connectivity orinfrared. The type of content that can be transferreddepends on the device model. If the other devicesupports synchronization, you can also synchronizedata between the other device and your Nokia ExxCommunicator.If you transfer data from your previous device, thedevice may require you to insert the SIM card. YourNokia Exx Communicator does not need a SIM cardwhen transferring data.Transfer data with Bluetooth1. In the information view, select Continue.2. Select Via Bluetooth. Both devices must support theselected connection type.3. Activate Bluetooth in your other device, and selectContinue in your Nokia Exx Communicator to startsearching for devices with active Bluetoothconnectivity.4. Select Stop in your Nokia Exx Communicator after ithas found your other device.5. Select your other device from the list. You are askedto enter a passcode (1 to 16 digits) on your NokiaExx Communicator. The passcode is used only onceto confirm this connection.6. Enter the code on your Nokia Exx Communicator,and select OK. Enter the passcode on your otherdevice, and select OK. The devices are now paired.See "Pair devices" on page 58.For some phone models, the Transfer dataapplication is sent to your other device as amessage. To install Transfer data on your otherdevice, open the message, and follow theinstructions on the display.7. From your Nokia Exx Communicator, select thecontent you want to transfer from your otherdevice.Transfer data with infrared1. In the information view, select Continue.2. Select Via infrared. Both devices must support theselected connection type.3. Connect the two devices. See "Infrared" on page 60.4. From your Nokia Exx Communicator, select thecontent you want to transfer from your otherdevice, and select OK.Content is copied from the memory of the other deviceto the corresponding location in your device. Copyingtime depends on the amount of data to be transferred.You can also cancel and continue later.The necessary steps for data transfer may varydepending on your device, and whether you have19Transfer content between devices file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 19 Jan 8, 2007 1:39:30 PM
interrupted data transfer earlier. The items that you cantransfer vary depending on the other device.20Transfer content between devices file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 20 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 20 Jan 8, 2007 1:39:30 PM
TelephoneAnswer a callNote: The actual invoice for calls and servicesfrom your service provider may vary, depending onnetwork features, rounding off for billing, taxes, and soforth.To make and receive calls, the device must be switchedon, the device must have a valid SIM card installed, andyou must be located in a service area of the cellularnetwork.To answer a call, press the call key.To decline the call, press the end key.To mute the ringing tone instead of answering a call,select Silence.When you have an active call and the call waitingfunction is activated, press the call key to answer a newincoming call. The first call is put on hold. To end theactive call, press the end key.Make a callImportant: If the device has been locked, enterthe lock code to activate the phone function. When thedevice is locked, calls may be possible to the officialemergency number. Making an emergency call in theoffline profile or when the device is locked requires thatthe device recognize the number to be an officialemergency number. It is advisable to change the profileor unlock the device by entering the lock code beforeyou make the emergency call.To make a call, enter the phone number, including thearea code, and press the call key.Tip: For international calls, add the + characterthat replaces the international access code, andenter the country code, area code (omit theleading 0, if necessary), and phone number.To end the call or cancel the call attempt, press the endkey.To make a call using the saved contacts, selectContacts in the standby mode. Enter the first letters ofthe name, scroll to the name, and press the call key. See"Contacts " on page 42.To make a call using the log, press the call key to viewup to 20 numbers that you last called or attempted tocall. Scroll to the desired number or name, and press thecall key. See "Log " on page 28.To adjust the volume of an active call, scroll right or left.To switch from a voice call to a video call, selectOptions > Switch to video call. The device ends thevoice call and makes a video call to the recipient.21Telephonefile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 21 Jan 8, 2007 1:39:30 PM
Make a conference call1. To make a conference call, enter a participant'sphone number, and press the call key.2. When the participant answers, select Options >New call.3. When you have made a phone call to all theparticipants, select Options > Conference to mergethe calls into a conference call.To mute the microphone of your device during the call,select Options > Mute.To drop a participant from the conference call, scroll tothe participant, and select Options > Dropparticipant.To discuss privately with a conference call participant,scroll to the participant, and select Options > Private.Video callsTo be able to make a video call, you need to be in thecoverage of a UMTS network. For availability of andsubscription to video call services, contact your networkoperator or service provider. While talking, you can seea real-time, two-way video between you and therecipient of the call, if the recipient has a compatiblemobile phone. The video image captured by the camerain your device is shown to the video call recipient. Avideo call can only be made between two parties.Warning: Do not hold the device near your earwhen the loudspeaker is in use, because the volumemay be extremely loud.To make a video call, enter the phone number or selectthe recipient of the call from Contacts, and selectOptions > Call > Video call. When the video call starts,the camera on the back of the device is activated, if youuse the cover phone. If the communicator is open, thecamera on the communicator is activated. If the camerais already in use, video sending is disabled. If therecipient of the call does not want to send a video backto you, a still image is shown instead. You can definethe still image in > Tools > Settings > Call >Image in video call.To disable the sending of audio, video, or video andaudio, select Options > Disable > Sending audio,Sending video, or Sending aud. & video.To use the loudspeaker for receiving audio, selectOptions > Activate loudspeaker. To mute theloudspeaker and use the earpiece, select Options >Activate handset.To swap the places of images, select Options > Changeimage order.To zoom the image on the display, select Options >Zoom in or Zoom out.To end the video call and make a new voice call to thesame recipient, select Options > Switch to voice call.22Telephonefile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 22 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 22 Jan 8, 2007 1:39:30 PM
Video sharingTo share videos (network service) during a voice call,you need to configure the session initiation protocolsettings at > Tools > Settings > Connection > SIPsettings. Contact your service provider for the correctsettings.You also need to set the network mode to UMTS at >Tools > Settings > Phone > Network.Share a video1. Make a phone call to the selected recipient. Therecipient needs to have a compatible phone. Youcan start sharing a video once the phone call isestablished and your device has been registered tothe SIP server.2. To send live video or a video clip from your device,select Options > Share video > Live video orRecorded clip. To preview the clip, select Options >Play.3. Select the recipient from Contacts, or enter therecipient's phone number or SIP address manuallyto send an invitation to the recipient. Sharing beginsautomatically when the recipient accepts the videosharing.4. To end sharing the video, select Stop. The voice callcontinues normally.Receive a video sharing invitationWhen you receive a video sharing invitation, a messageis displayed showing the caller’s name or SIP address.To accept the invitation and begin the sharing session,select Accept.To reject the invitation, select Reject. The voice callcontinues normally.Net calls Your device supports voice calls over the internet (netcalls). Your device attempts emergency calls primarilyover cellular networks. If an emergency call usingcellular networks is not successful, your deviceattempts an emergency call through your net callprovider. Due to the established nature of cellulartelephony, you should use cellular networks foremergency calls, if possible. If you have cellular networkcoverage available, make sure that your cellular phoneis switched on and ready to make calls before youattempt an emergency call. The capability for anemergency call using internet telephony depends onthe availability of a WLAN network and your net callprovider's implementation of emergency callcapabilities. Contact your net call provider to check theinternet telephony emergency call capability.Select > Connectivity > Internet tel..With the net call service (network service), you canmake and receive calls over the internet using the VoIP(voice over internet protocol) technology. Net calls canbe established between computers, between mobile23Telephonefile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 23 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 23 Jan 8, 2007 1:39:30 PM
phones, and between a VoIP device and a traditionaltelephone. To make or receive a net call, your devicemust be within WLAN coverage, for example.The availability of the net call service may varyaccording to your country or area.Create a net call profileBefore you can make net calls, you need to create a netcall profile.1. Select > Tools > Settings > Connection > SIPsettings > Options > Add new, and enter therequired information. Ensure that Registration is setto Always on. Contact your net call provider for thecorrect settings.2. Select Proxy server > Transport type > {Nodisplay_text mapping for 'qtn_sip_auto.gs_voip',locale='en'}.3. Select Back until you return to the Connectionsettings main view.4. Select Internet tel. > Options > New profile. Entera name for the profile, and select the SIP profile youjust created.To set the created profile to be used when connectingto the net call service automatically, select >Connectivity > Internet tel. > Preferred profile.To login to the net call service manually, selectRegistration > When needed, and Transport type >UDP or TCP in the SIP settings when creating a net callprofile.Connect to the net call serviceTo make or receive a net call, your device must beconnected to a net call service. If you have selectedautomatic login, your device automatically connects tothe net call service. If you login to the service manually,choose an available network from the list, and selectSelect.The list of networks is refreshed automatically every 15seconds. To refresh the list manually, select Options >Refresh. Use this option, if your WLAN is not shown onthe list.To select a net call service for outgoing calls if the deviceis connected to more than one service, select Options >Change service.To configure new services, select Options > Configureservice. This option is shown only if there are servicesthat have not been configured.To save the network to which you are currentlyconnected, select Options > Save network. The savednetworks are marked with a star on the list of networks.To connect to a net call service using a hidden WLAN.select Options > Use hidden network.To end the connection to a net call service, selectOptions > Disconnect from serv..Make net callsYou can make a net call from all applications where youcan make a regular voice call. For example in Contacts,24Telephonefile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 24 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 24 Jan 8, 2007 1:39:30 PM
scroll to the desired contact, and select Call > Options >Internet call.To make a net call in the standby mode, enter the phonenumber or internet address, and press the call key.To make a net call with the cover keypad to an addressthat does not start with a digit, press any number keywhen the device is in standby mode, then press # for afew seconds to clear the display and to switch thedevice from the number mode to the letter mode. Enterthe address, and press the call key.To set net call as the preferred call type for outgoingcalls, select > Connectivity > Internet tel. >Options > Settings > Preferred call type > Internetcall. When your device is connected to a net call service,all calls are made as net calls.1-touch dialing Select > Tools > Settings > Phone > Call > 1-touch dialing > On.1-touch dialing allows you to make a call by pressingand holding a number key in the standby mode.To assign a number key to a phone number, select >Tools > 1-touch. Scroll to the number key (2 - 9) on thedisplay, and select Options > Assign. Select the desirednumber from Contacts.To delete the phone number assigned to a number key,scroll to the 1-touch dialing key, and select Options >Remove.To modify a phone number assigned to a number key,scroll to the 1-touch dialing key, and select Options >Change.Call forward settingsSelect > Tools > Settings > Phone > Callforwarding.Forward incoming calls to your voice mailbox or toanother phone number. For details, contact your serviceprovider.Select to forward voice, data, or fax calls, and select fromthe following options:•All voice calls, All data calls, or All fax calls — Forwardall incoming voice, data, or fax calls.•If busy — Forward incoming calls when you have anactive call.•If not answered — Forward incoming calls after yourdevice rings for a specified period of time. Define thetime you let the device ring before forwarding thecall in the Delay time: field.•If out of reach — Forward calls when the device isswitched off or out of network coverage.•If not available — Activate the last three settings atthe same time. This option forwards calls if yourdevice is busy, not answered, or out of reach.To check the current forwarding status, scroll to theforwarding option, and select Options > Check status.To stop forwarding calls, scroll to the forwardingoption, and select Options > Cancel.Call restriction and call forwarding cannot be active atthe same time.25Telephonefile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 25 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 25 Jan 8, 2007 1:39:30 PM
Call restrictionSelect > Tools > Settings > Phone > Callrestriction.You can restrict the calls that can be made or receivedwith the device (network service). To change thesettings, you need the restriction password from yourservice provider. Call restriction affects all calls,including data calls. Call restriction and call forwardingcannot be active at the same time.When calls are restricted, calls may be possible to theofficial emergency number programmed into yourdevice.To restrict calls, select Voice call restriction, and selectfrom the following options:•Outgoing calls — Prevent making voice calls withyour device.•Incoming calls — Restrict incoming calls.•International calls — Prevent calling to foreigncountries or regions.•Incoming calls if roaming — Restrict incoming callswhen outside your home country.•International calls except to homecountry — Prevent calls to foreign countries orregions, but allow calls to your home country.To check the status of voice call restriction, select therestriction option, and select Options > Check status.To stop all voice call restrictions, select a restrictionoption, and select Options > Cancel all restrict..Net call restrictionTo restrict net calls, select > Tools > Settings >Call restriction > Internet call restriction.To reject net calls from anonymous callers, selectAnonymous call restriction > On.Change the restriction passwordTo change the password used for restricting voice, fax,and data calls, select > Tools > Settings > Callrestriction > Voice call restriction > Options > Editrestriction passwd.. Enter the current code, then thenew code twice. The restriction password must be fourdigits long. For details, contact your service provider.Send touch tonesYou can send touch tones during an active call to controlyour voice mailbox or other automated phone services.Send a touch tone sequence1. Make a call, and wait until the other end answers.2. Select > Options > Send touch tones.3. Enter the touch tone sequence, or select apredefined sequence.Attach a touch tone sequence to a contact card1. Select > Contacts. Open a contact, and selectOptions > Edit > Options > Add detail > Touchtones.26Telephonefile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 26 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 26 Jan 8, 2007 1:39:30 PM
2. Enter the tone sequence. To insert a pause of about2 seconds before or between touch tones, enter p.To set the device to send the touch tones only afteryou select Send touch tones during a call, enter w.3. Select Done.Voice mail Select > Tools > Call mailbox.When you open the Voice mail application for the firsttime, you are asked to enter the number of your voicemailbox. To change the number, select Options >Change number.To call your voice mail, select Options > Call voicemailbox.To call your voice mailbox in the standby mode, pressand hold 1; or press 1 and then the call key.27Telephonefile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 27 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 27 Jan 8, 2007 1:39:30 PM
Log Select > Log.Log stores information about the communicationhistory of the device. The device registers missed andreceived calls only if the network supports thesefunctions, the device is switched on and within thenetwork service area.To view recently missed, received, and dialed calls,select Recent calls.Tip: To open Dialed numbers in the standbymodes, press the call key.To view the approximate duration of calls to and fromyour device, select Call timers.To view the amount of data transferred during packetdata connections, select Packet data.Monitor allcommunicationsTo monitor all voice calls, text messages, or dataconnections registered by the device, open the generallog tab.To view detailed information about a communicationevent, scroll to it, and press the scroll key.Tip: Subevents, such as a text message sent inmore than one part and packet dataconnections, are logged as one communicationevent. Connections to your mailbox,multimedia messaging center, or web pagesare shown as packet data connections.To add the phone number from a communication eventto Contacts, select Options > Save to Contacts, andselect a new or an existing contact.To copy the number, for example to paste it to a textmessage, select Options > Copy number.To view a single type of communication event orcommunication events with one other party, selectOptions > Filter, and select the desired filter.To erase the contents of the log, recent calls register,and messaging delivery reports permanently, selectOptions > Clear log. To erase a single event, select theevent and Options > Delete.Log settingsSelect Options > Settings.To set the time for keeping all communication eventsin the log, select Log duration, and the time. If you selectNo log, all log contents are permanently deleted.To set the device to display the duration of a call duringthe call, select Show call duration > Yes.28Log file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 28 Jan 8, 2007 1:39:30 PM
Messaging Select > Messaging.In Messaging (network service), you can send andreceive text messages, multimedia messages, and e-mail messages. You can also receive web servicemessages, cell broadcast messages, and specialmessages containing data, and send servicecommands.Before sending or receiving messages, you may need todo the following:•Insert a valid SIM card in the device and be locatedin the service area of a cellular network.•Verify that the network supports the messagingfeatures you want to use and that they are activatedon your SIM card.•Define the internet access point (IAP) settings on thedevice. See "Access points" on page 87.•Define the e-mail account settings on the device. See"E-mail account settings" on page 39.•Define the text message settings on the device. See"Text message settings" on page 38.•Define the multimedia message settings on thedevice. See "Multimedia messagesettings" on page 38.The device may recognize the SIM card provider andautomatically configure some of the message settings.If not, you may need to define the settings manually; orcontact your service provider to configure the settings.Messages and data received using Bluetoothconnectivity or infrared are stored in the Inbox folder.E-mail messages are stored in Mailbox. Messages thatyou have been writing can be stored in the Drafts folder.Messages that are waiting to be sent are stored in theOutbox folder, and messages that have been sent,excluding Bluetooth and infrared messages, are storedin the Sent folder.Tip: Messages are placed in Outbox, forexample, when your device is outside networkcoverage. You can also schedule e-mailmessages to be sent the next time you connectto your remote mailbox.To request the network to send you a delivery report ofthe text messages and multimedia messages you havesent (network service), select Options > Settings >Text message or Multimedia message > Receivereport. The reports are saved in the Reports folder.Organize messagesTo create a new folder to organize your messages,select My folders > Options > New folder.To rename a folder, select Options > Rename folder.You can only rename folders that you have created.To move a message to another folder, select Options >Move to folder, the folder, and OK.29Messaging file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 29 Jan 8, 2007 1:39:30 PM
To sort messages in a specific order, select Options >Sort by. You can sort the messages by Date, Sender,Subject, or Message type.To view the properties of a message, select the messageand Options > Message details.Message readerThe message reader reads your received messagesaloud.To play a message, press and hold the left selection keywhen you receive a text message.To start reading a message in Inbox or mailbox, selectOptions > Play.To start reading the next message in Inbox or mailbox,scroll down. To start reading the message again, scrollup. In the beginning of the message, scroll up to hearthe previous message.To adjust the volume, scroll left or right.To pause the reading, press the left selection key briefly.To continue, press the left selection key briefly again.To end the reading, press the end key.To set the voice properties, select > Tools >Speech.Text messagesSelect > Messaging.Your device supports the sending of text messagesbeyond the character limit for a single message. Longermessages are sent as a series of two or more messages.Your service provider may charge accordingly.Characters that use accents or other marks, andcharacters from some language options, take up morespace, limiting the number of characters that can besent in a single message.1. To write a text message, select New message >Text message.2. In the To field, enter a recipient's number, or pressthe scroll key to add a recipient from Contacts. If youenter more than one number, separate the numberswith a semicolon.3. Enter the text of the message. To use a template,select Options > Insert > Template.4. Select Options > Send.Picture messagesSelect > Messaging.Note: The picture message function can be usedonly if it is supported by your service provider. Onlycompatible devices that offer picture message featurescan receive and display picture messages. Theappearance of a message may vary depending on thereceiving device.To view a picture message, open the message from theInbox folder.30Messaging file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 30 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 30 Jan 8, 2007 1:39:30 PM
Forward a picture message1. To forward the message, select Options >Forward.2. In the To field, enter a recipient's number, or pressthe scroll key to add a recipient from Contacts. If youenter more than one number, separate the numberswith a semicolon.3. Enter the text of your message. The text can have120 characters. To use a template, select Options >Insert > Template.4. Select Options > Send.Multimedia messagesOnly devices that have compatible features can receiveand display multimedia messages. The appearance ofa message may vary depending on the receiving device.Select > Messaging.A multimedia message (MMS) can contain text andobjects such as images, sound clips, or video clips.Before you can send or receive multimedia messageson your device, you must define the multimediamessage settings. Your device may have recognized theSIM card provider and automatically configured themultimedia message settings. If not, contact yourservice provider. See "Multimedia messagesettings" on page 38.Create and send multimediamessages1. To create a new message, select New message >Multimedia message.2. In the To field, enter a recipient's number or e-mailaddress, or press the scroll key to add a recipientfrom Contacts. If you enter more than one numberor e-mail address, separate them with a semicolon.3. In the Subject field, enter a subject for the message.To change the fields that are visible, select Options >Address fields.4. Enter the text of the message, and select Options >Insert object to add media objects. You can addobjects such as Image, Sound clip, or Video clip.The wireless network may limit the size of MMSmessages. If the inserted picture exceeds this limit,the device may make it smaller so that it can be sentby MMS.5. Each slide of your message can contain only onevideo or sound clip. To add more slides to yourmessage, select Options > Insert new > Slide. Tochange the order of slides in your message, selectOptions > Move.6. To preview a multimedia message before sendingit, select Options > Preview.7. Select Options > Send.To delete an object from a multimedia message, selectOptions > Remove.To set the sending options for the current multimediamessage, select Options > Sending options.31Messaging file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 31 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 31 Jan 8, 2007 1:39:30 PM
Create presentationsCreating multimedia presentations is not possible if theMMS creation mode setting is set to Restricted. Tochange the setting, select Messaging > Options >Settings > Multimedia message > MMS creationmode > Free.1. To create a presentation, select New message >Multimedia message.2. In the To field, enter a recipient's number or e-mailaddress, or press the scroll key to add a recipientfrom Contacts. If you enter more than one numberor e-mail address, separate them with a semicolon.3. Select Options > Create presentation and apresentation template. A template may definewhich media objects you can include in thepresentation, where they appear, and which effectsare displayed between images and slides.4. Scroll to the text area and enter the text.5. To insert images, sound, video, or notes in yourpresentation, scroll to the corresponding objectarea, and select Options > Insert.6. To add slides, select Insert > New slide.To preview the presentation, select Options >Preview. Multimedia presentations may only be viewedin compatible devices that support presentations. Theymay appear different in different devices.To select the background color for the presentation andbackground images for different slides, selectOptions > Background settings.To set effects between images or slides, selectOptions > Effect settings.View presentationsTo view a presentation, open the multimedia messagefrom the Inbox folder. Scroll to the presentation, andpress the scroll key.To pause the presentation, press either selection key.To resume playing the presentation, select Options >Continue.If the text or images are too large to fit on the display,select Options > Activate scrolling, and scroll to see theentire presentation.To find phone numbers and e-mail or web addresses inthe presentation, select Options > Find. You may usethese numbers and addresses to make calls, sendmessages, or create bookmarks, for example.E-mail messagesTo receive and send e-mail, you must have a remotemailbox service. This service may be offered by aninternet service provider, a network service provider, oryour company. Your device is compliant with internetstandards SMTP, IMAP4 (revision 1), and POP3, and withdifferent vendor-specific e-mail solutions. Other e-mailproviders may offer services with different settings orfeatures than those described in this user guide.Contact your e-mail provider or service provider formore details.32Messaging file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 32 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 32 Jan 8, 2007 1:39:30 PM
Before you can send, receive, retrieve, reply to, andforward e-mail on your device, you must also do thefollowing:•Configure an internet access point (IAP). See "Accesspoints" on page 87.•Set up an e-mail account, and define the e-mailsettings correctly. See "E-mail accountsettings" on page 39.Follow the instructions from your remote mailbox andinternet service providers. Contact your network andinternet service providers or operator for the correctsettings.Set up your e-mail with themailbox guideIf you select > Messaging > Mailbox, and have notset up your e-mail account, you are prompted to do so.To start setting up the e-mail account with the mailboxguide, select Yes.1. To start entering the e-mail settings, select Start.2. In Mailbox type, select IMAP4 or POP3, and selectNext.Tip: POP3 is a version of the post officeprotocol that is used to store and retrievee-mail or internet mail messages from aserver. IMAP4 is a version of the internetmessage access protocol that lets youaccess and manage e-mail messages whilethe messages are still on the e-mail server.You can then choose which messages todownload to your device.3. In My e-mail address, enter your e-mail address.Select Next.4. In Incoming mail server, enter the name of theremote server that receives your e-mail, and selectNext.5. In Outgoing mail server, enter the name of theremote server that sends your e-mail, and selectNext. Depending on your mobile operator, youmight have to use your mobile operator's outgoingmail server instead of your e-mail provider's.6. In Access point, select the internet access point yourdevice should use when it retrieves the e-mail. If youselect Always ask, each time the device starts toretrieve e-mail, it asks which internet access pointit should use. Select Next.7. Enter a name for your new mailbox, and selectFinish.When you create a new mailbox, the name you give tothe mailbox replaces Mailbox in the Messaging mainview. You can have up to six mailboxes.If you have defined several mailboxes, select one ofthem as your default mailbox. That mailbox is usedevery time you start composing a new e-mail message.To define the default mailbox, select Options >Settings > E-mail > {No display_text mapping for'qtn_mce_settings_mail_default.mcesettings_diy',locale='en'} and the mailbox.33Messaging file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 33 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 33 Jan 8, 2007 1:39:30 PM
Connect to a remote mailboxE-mail addressed to you is not automatically receivedby your device, but by your remote mailbox. To readyour e-mail, you must first connect to the remotemailbox; then select the e-mail messages you wish toretrieve into your device.1. To retrieve received e-mail messages to your deviceand view them, select your mailbox in theMessaging main view. When the device asksConnect to mailbox?, select Yes.2. Select Options > Retrieve e-mail > New to retrievenew messages that you have neither read norretrieved, Selected to retrieve only messages youselect from the remote mailbox, or All to retrieve allmessages not previously retrieved.3. To manage your e-mail offline to save in connectioncosts and work in conditions that do not allow adata connection, select Options > Disconnect todisconnect from the remote mailbox. Any changesyou make in the remote mailbox folders whileoffline, take effect in your remote mailbox the nexttime you go online and synchronize.Read and reply to e-mailImportant: Exercise caution when openingmessages. E-mail messages may contain malicioussoftware or otherwise be harmful to your device or PC.To read a received e-mail, open it from the mailbox.To open an attachment, select Options >Attachments. Scroll to the attachment, and press thescroll key.To reply only to the sender of an e-mail, select Options >Reply > To sender.To reply to all recipients of an e-mail, select Options >Reply > To all.To delete an attachment from an e-mail that you aresending, select the attachment and Options >Remove.Tip: If you reply to an e-mail that containsattached files, the attachments are notincluded in the reply. If you forward thereceived e-mail, the attachments are included.To set the message priority, select Options > Sendingoptions > Priority.To set the sending time for the e-mail message, selectOptions > Sending options > Send message. SelectImmediately, or select When conn. avail. if you areworking offline.To call the sender of the e-mail message, if the sendercan be found in Contacts, select Options > Call.To reply to the sender of the e-mail with an audiomessage or multimedia message, select Options >Create message.To forward an e-mail, select Options > Forward.34Messaging file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 34 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 34 Jan 8, 2007 1:39:30 PM
Delete messagesTo free up memory space on your device, regularlydelete messages from the Inbox and Sent folders, anddelete retrieved e-mail messages.To delete e-mail from the device only, and keep theoriginal on the server, select Options > Delete > {Nodisplay_text mapping for'qtn_mce_pop_up_phone_only.imum_diy', locale='en'}.To delete e-mail both from the device and the remoteserver, select Options > Delete > {No display_textmapping for'qtn_mce_pop_up_phone_server.imum_diy',locale='en'}.To cancel the deleting, select Options > Restore.Subfolders in your remote e-mailIf you create subfolders in your IMAP4 mailboxes on aremote server, you can view and manage these folderswith your device when you subscribe to them. You canonly subscribe to folders in your IMAP4 mailboxes.To view folders in your IMAP4 mailbox, establish aconnection, and select Options > E-mail settings >Retrieval settings > Folder subscriptions.To view a remote folder, select a folder and Options >Subscribe. Every time you go online, the subscribedfolders are updated. This may take some time if thefolders are large.To update the list of folders, select a folder andOptions > Update folder list.Special messagesSelect > Messaging.You can receive special messages that contain data,such as operator logos, ringing tones, bookmarks, orinternet access or e-mail account settings.To save the contents of these messages, selectOptions > Save.Send service commandsYou can send a service request message (also known asa USSD command) to your service provider and requestactivation for certain network services. Contact yourservice provider for the service request text.To send a service request message, select Options >Service command. Enter the service request text, andselect Options > Send.Receive cell broadcast messagesTo receive messages on various topics, such as weatheror traffic conditions, from your service provider, selectOptions > Cell broadcast (network service). Foravailable topics and relevant topic numbers, contactyour service provider. Cell broadcast messages cannotbe received in UMTS (3G) networks. A packet dataconnection may prevent cell broadcast reception.35Messaging file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 35 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 35 Jan 8, 2007 1:39:30 PM
Instant messaging Select > Connectivity > IM.Instant messaging (IM) (network service) allows you toconverse with other people using instant messages andjoin discussion forums (IM groups) with specific topics.Various service providers maintain IM servers that youcan log in to after you register to an IM service. Serviceproviders may differ in their support of features.If IM is not available from your wireless service provider,it may not appear in the menu of your device. Contactyour service provider for more information aboutsigning up for IM services and costs of services. For moreinformation on IM settings, contact your serviceprovider.You may receive the settings in a special text messagefrom the service provider that offers the IM service. Ifnot, enter the settings manually.Define IM settingsTo define the IM application settings, select Options >Settings > IM settings. You can, for example, set yourscreen name and IM alert tones.To converse with an IM user or users, and to view andedit your IM contacts, you must log into an instantmessaging server. To add an IM server, select Options >Settings > Server settings > Servers. Ask your serviceprovider for the correct settings. To set the server as theone to which your device automatically logs in, selectOptions > Settings > Server settings > Defaultserver.To define how your device connects to the IM server,select Options > Settings > Server settings > IM logintype. To establish a connection between your deviceand the default server automatically, select Automatic.To automate the connection only when in your homenetwork, select Auto in home netw. To connect to theserver when you open the IM application, select On app.start-up. To connect to the server manually, selectManual and log into the server in the IM main view byselecting Options > Log in. Enter your user ID andpassword at the prompt. You can obtain the user name,password, and other settings to log in from your serviceprovider when you register for the service.Start a conversationOpen Conversations.To search for IM users and user IDs, select IM contacts >Options > New IM contact > Search. You can search byUser's name, User ID, Phone number, and E-mailaddress.To view a conversation, select a participant.To continue the conversation, enter your message, andselect Options > Send.To return to the conversations list without closing theconversation, select Back. To close the conversation,select Options > End conversation.To start a new conversation, select Options > Newconversation. You can start a new conversation with acontact while you are inside an active conversation.However, you cannot have two active conversationswith the same contact.36Messaging file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 36 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 36 Jan 8, 2007 1:39:30 PM
To insert an image to an instant message, selectOptions > Send image, and select the image you wantto send.To save a conversation participant to your IM contacts,select Options > Add to IM contacts.To save a conversation, while in the conversation view,select Options > Record chat. The conversation is savedas a text file that can be opened and viewed in the Notesapplication.IM groupsOpen IM groups. IM groups is available only if you arelogged into an IM server, and the server supports IMgroups.To create an IM group, select Options > Create newgroup.To join an IM group or to continue a group conversation,scroll to the group, and press the scroll key. Enter amessage, and select Options > Send.To join an IM group that is not on the list, but for whichyou know the group ID, select Options > Join newgroup.To leave the IM group, select Options > Leave IMgroup.To search for IM groups and group IDs, select IMgroups > Options > Search. You can search by Groupname, Topic, and Members (user ID).To add an IM user to the group, select Options > Addmember. Select a user from your IM contacts or enterthe contact ID.To remove a member from the IM group, selectOptions > Remove.To provide members with editing rights to the group,select Options > Add editor. Select a user from your IMcontacts or enter the ID of the user. IM users with editingrights can edit group settings and invite other users tojoin the group or ban them from the group.To remove editing rights from a group member, selectOptions > Remove.To prevent IM users from joining the group, selectOptions > Add to banned list. Select a user from yourIM contacts or enter the ID of the user.To allow a banned user to join the group, selectOptions > Remove.Service messagesSelect > Messaging.Service messages are sent to your device by serviceproviders. Service messages may contain notificationssuch as news headlines, services, or links through whichthe message content can be downloaded.To define the service message settings, select Options >Settings > Service message.To download the service or message content, selectOptions > Download message.37Messaging file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 37 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 37 Jan 8, 2007 1:39:30 PM
To view information about the sender, web address,expiration date, and other details of the messagebefore downloading it, select Options > Messagedetails.Messaging settingsSelect > Messaging > Options > Settings.Fill in all fields marked with Must be defined or with ared asterisk.Your device may recognize the SIM card provider andconfigure the correct text message, multimediamessage, and GPRS settings automatically. If not,contact your service provider for the correct settings,order the settings from your service provider in aconfiguration message, or use the Settings wizardapplication.Text message settingsSelect > Messaging > Options > Settings > Textmessage.Select from the following:•Message centers — View the available messagecenters for your device.•Message center in use — Select a message center tosend the message.•Character encoding — Select Reduced support to useautomatic character conversion to anotherencoding system when available.•Receive report — Select Yes if you want the networkto send you delivery reports on your messages(network service).•Message validity — Select how long the messagecenter resends your message if the first attempt fails(network service). If the recipient cannot be reachedwithin the validity period, the message is deletedfrom the message center.•Message sent as — Convert the message to anotherformat, such as Text, Fax, Paging or E-mail. Changethis option only if you are sure that your messagecenter is able to convert text messages into theseother formats. Contact your network operator.•Preferred connection — Select the preferred methodof connection when sending text messages fromyour device.•Reply via same center — Select whether you wantthe reply message to be sent using the same textmessage center number (network service).Multimedia message settingsSelect > Messaging > Options > Settings >Multimedia message.Define the following settings:•Image size — Select Small or Large to scale imagesin multimedia messages. Select Original to maintainthe original image size.•MMS creation mode — Select Restricted to have yourdevice prevent you from including content inmultimedia messages that may not be supported bythe network or the receiving device. To receivewarnings about including such content, select38Messaging file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 38 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 38 Jan 8, 2007 1:39:30 PM
Guided. To create a multimedia message with norestrictions on attachment type, select Free. If youselect Restricted, creating multimedia presentationsis not possible.•Access point in use — Select the default access pointto connect to the multimedia message center. Youmay not be able to change the default access pointif it is preset in your device by your service provider.•Multimedia retrieval — Select Always automatic toreceive multimedia messages always automatically,Auto in home netw. to receive notification of a newmultimedia message that you can retrieve from themessage center (for example, when you aretraveling abroad and are outside your homenetwork), Manual to retrieve multimedia messagesfrom the message center manually, or Off to preventreceipt of any multimedia messages.•Allow anon. msgs. — Select whether you want toreceive messages from unknown senders.•Receive ads — Select whether you want to receivemessages defined as advertisements.•Receive report — Select Yes to have the status of thesent message to be shown in the log (networkservice). Receiving a delivery report of a multimediamessage that has been sent to an e-mail addressmay not be possible.•Deny report sending — Select Yes to not senddelivery reports from your device for receivedmultimedia messages.•Message validity — Select how long the messagingcenter tries to send the message (network service).If the recipient of a message cannot be reachedwithin the validity period, the message is removedfrom the multimedia messaging center. Maximumtime is the maximum amount of time allowed by thenetwork.E-mail account settingsSelect > Messaging > Options > Settings > E-mail.If you try to edit mailbox settings but have not set upan e-mail account, the mailbox guide opens and helpsyou set up your e-mail account.If you have defined a mailbox, scroll to it, and press thescroll key to edit the settings.The settings available for editing may vary. Somesettings may be preset by your service provider.User settingsSelect the e-mail account, and Options > Edit > Usersettings, and define the following settings:•My name — Enter a name to appear before your e-mail address when you send e-mail.•{No display_text mapping for'qtn_mbxs_settings_def_replyto.imum_diy',locale='en'} — Select whether you want replies to beredirected to a different address. Select {Nodisplay_text mapping for'qtn_mbxs_settings_def_replyto_on.imum_diy',locale='en'}, and enter the e-mail address to whichyou want to direct the replies. You can only enter oneaddress to which replies are directed.•{No display_text mapping for'qtn_mbxs_settings_def_delete_messages.imum_diy', locale='en'} — Select whether you want to delete39Messaging file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 39 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 39 Jan 8, 2007 1:39:30 PM
the e-mail messages only from the device or fromboth the device and the server. Select {Nodisplay_text mapping for'qtn_mbxs_settings_def_allwaysask.imum_diy',locale='en'} if you want to confirm from where thee-mail should be deleted every time you delete an e-mail.•Send message — Select to send the e-mailimmediately or when a connection is available.•Send copy to self — Select whether you want to savea copy of the e-mail to your remote mailbox and tothe address defined in My e-mail address in theOutgoing e-mail settings.•Include signature — Select whether you want toattach a signature to your e-mail messages.•New e-mail alerts — Select whether you want to benotified of a new received e-mail message with atone and a note.Retrieval settingsSelect the e-mail account, and Options > Edit >Retrieval settings, and define the following settings:•E-mail to retrieve (for POP3 mailboxes only) — Selectwhether you want to retrieve only the e-mail headerinformation such as sender, subject and date, e-mail,or e-mail with attachments.•Retrieval amount — Select the number of e-mailmessages you want to retrieve from the remoteserver to your mailbox.•IMAP4 folder path (for IMAP4 mailboxesonly) — Define the folder path for folders to besubscribed.•Folder subscriptions (for IMAP4 mailboxesonly) — Subscribe to other folders in the remotemailbox and retrieve content from those folders.Automatic retrieval settingsSelect the e-mail account, select Options > Edit >Automatic retrieval, and define the following settings:•E-mail retrieval — Select Enabled to retrieve new e-mail messages automatically from your remotemailbox, or Only in home netw. to retrieve new e-mail messages automatically from your remotemailbox only when you are in your home networkand not, for example, traveling.•Retrieval days — Select the days on which e-mail isretrieved to your device.•Retrieval hours — Define the hours between whichthe e-mail is retrieved.•Retrieval interval — Select the interval betweenretrieving new e-mail messages.•E-mail notifications — Select whether you want toreceive notifications on received e-mail.Cell broadcast settingsSelect > Messaging > Options > Settings > Cellbroadcast.Select from the following:•Reception — Select On to receive cell broadcastmessages.•Language — Select the languages in which you wantto receive cell broadcast messages.40Messaging file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 40 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 40 Jan 8, 2007 1:39:30 PM
•Topic detection — Select On to display new topics inthe cell broadcast topics list.Other settingsSelect > Messaging > Options > Settings >Other.Select from the following:•Save sent messages — Select whether to store sentmessages in the Sent folder.•Number of saved msgs. — Enter the number of sentmessages to save. When the limit is reached, theoldest message is deleted.•Memory in use — Select where to save yourmessages. You can save messages to the memorycard only if a memory card is inserted.•{No display_text mapping for'qtn_mce_settings_folder_view.mcesettings_diy',locale='en'} — Define how you want the messagesin the Inbox to be shown.41Messaging file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 41 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 41 Jan 8, 2007 1:39:30 PM
Contacts Select > Contacts.You can save and update contact information, such asphone numbers, home addresses, or e-mail addressesof your contacts. You can add a personal ringing toneor a thumbnail image to a contact. You can also createcontact groups, which allow you to send text messagesor e-mail to many recipients at the same time. You canadd received contact information (business cards) toContacts. Contact information can only be sent to orreceived from compatible devices.Copy contacts between SIMand device memoryIf you already have contacts saved on your SIM card, youcan copy them to the device memory.To copy contacts from a SIM card to the device memory,select Options > SIM contacts > SIM directory. Mark thecontacts to copy, or select Options > Mark/Unmark >Mark all to copy all contacts. Select Options > Copy toContacts.To copy contacts from the device memory to a SIM card,select Options > Copy to SIM directory. Mark thecontacts you want to copy, or select Options > Mark/Unmark > Mark all to copy all contacts. Select Options >Copy to SIM directory.Tip: If you have saved contacts on your previousdevice, you can use the Transfer application tocopy them. See "Transfer content betweendevices " on page 19.To search for a contact, enter the first letters of thename to the search field. A list of the contacts startingwith the letters appear on the display.Manage contactsTo add a contact, select Options > New contact.To attach a small thumbnail image to a contact, selectOptions > Edit > Options > Add thumbnail. Thethumbnail image is shown when the contact calls.To listen to the voice tag assigned to the contact, selectOptions > Play voice tag.To edit information in a contact, select Options >Edit.Tip: You can also use Nokia PC Suite to add andedit contacts.To send contact information, select Options > Send.You can assign a default number or address to a contactso you can easily call or send a message to the defaultnumber or address, even if several numbers oraddresses are saved to that contact. The defaultnumber is also used in voice dialing.42Contacts file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 42 Jan 8, 2007 1:39:30 PM
To change the default information for a contact, openthe contact, and select Options > Defaults. Select thenumber or address you want to set as a default. Thedefault number or address is underlined in the contact.To add a contact to a group, select Options > Add togroup (shown only if you have created a group).Tip: To check to which groups a contactbelongs, select Options > Belongs to groups.To add a 1-touch key to the contact's phone number,select Options > Assign 1-touch no..To change the display order of the first and last namesof your contacts, select Options > Settings, and Lastname First name, or First name Last name.Manage contact groupsYou can create a contact group so that you can send textor e-mail messages to several recipients at the sametime.1. Open the contact groups tab, and select Options >New group.2. Enter a name for the group, and select OK.3. Open the group, and select Options > Addmembers.4. Scroll to each contact you want to add to the group,and press the scroll key to mark it.5. Select OK to add all marked contacts to the group.To remove a contact from a contact group, scroll to thecontact that you want to remove, and select Options >Remove from group.To rename a group, select Options > Rename.Add ringing tones forcontactsYou can select a ringing tone for a contact or contactgroup. If the caller's phone number is sent with theincoming call and your device recognizes the number,the ringing tone plays when the contact calls you.To select a ringing tone for a contact or contact group,open the contact or contact group, and select Options >Ringing tone. A list of ringing tones opens. Select theringing tone you want to use.To remove the assigned ringing tone, select Defaulttone from the list of ringing tones.Business cardsYou can send, receive, view, and save contacts asbusiness cards in vCard or Nokia compact business cardformat.To send a business card, select the contact fromContacts, select Options > Send, and the sendingmethod. Enter the phone number or address, or add arecipient from Contacts. Select Options > Send. If youselect text message as the sending method, businesscards are sent without thumbnail images.To view a received business card, select Open from thedisplayed notification, or open the message from theInbox folder in the Messaging application.43Contacts file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 43 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 43 Jan 8, 2007 1:39:30 PM
To save a received business card, select Options > Savebusiness card.44Contacts file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 44 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 44 Jan 8, 2007 1:39:30 PM
Calendar Select > Calendar.You can create and view scheduled events andappointments. You can also set alarms for calendarentries.You can synchronize your calendar data with acompatible computer using Nokia PC Suite. Forinformation on synchronization, see the Nokia PC Suiteguide.Create calendar entriesYou can create the following types of calendar entries:•Meeting entries have a specific date and time.•Memo entries are related to the whole day but notto a specific time of the day. Memo entries do notappear in the week view.•Anniversary entries remind you of birthdays andspecial dates. They refer to a certain day but not aspecific time of the day. Anniversary entries arerepeated every year.•To-do entries remind you of a task that has a duedate but not a specific time of the day.To create a calendar entry, scroll to a date, and selectOptions > New entry. Select the entry type. Theavailable settings for meeting, memo, anniversary, andto-do entries vary.To delete a calendar entry, select Options > Delete, andselect Before date to delete all entries before theselected date, or All entries to delete all calendar entriesfrom the device.To send a calendar entry to a compatible device, selectOptions > Send > Via text message, Via multimedia,Via e-mail, Via Bluetooth, or Via infrared.To add a received calendar entry, open the calendarentry attachment in the message, and select Options >Save to Calendar.To respond to a received calendar entry, select Accept,Tentative, or Decline. If you accept the entry or mark itas tentative, the entry is added to your calendar. Youcan send a response to the sender of the calendar entryby e-mail. Select Yes, and the message is saved inOutbox to wait for sending.To-do entriesYou can create and maintain a task or list of tasks thatmust be done by a certain day. Each task can beassigned a due date, and an alarm.Create a to-do entry1. Scroll to a date, and select Options > New entry >To-do.2. Enter the subject in the Subject field.3. Enter the due date.45Calendar file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 45 Jan 8, 2007 1:39:30 PM
4. To set an alarm for the to-do entry, select Alarm >On. Enter the alarm time and date.5. Specify a priority. The priority icons are ( ! ) High and( - ) Low. There is no icon for Normal.6. Define how the entry is handled duringsynchronization in the Synchronization field. SelectPrivate to hide the entry from viewers if thecalendar is available online, Public to make the entryvisible to viewers if the calendar is available online,or None to not copy the entry to your computerwhen you synchronize.To mark a task as completed, select Options > Mark asdone.To restore a task, select Options > Mark as not done.Calendar viewsTo switch between the different calendar views, selectOptions in any calendar view. Select the type of viewfrom the list.To set the default calendar view, select Options >Settings > Default view, and the view you want.To view a specific date, select Options > Go to date, andenter the date.46Calendar file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 46 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 46 Jan 8, 2007 1:39:30 PM
Clock Select > Clock.In Clock, you can view your local time and time zoneinformation, set and edit alarms, or modify date andtime settings.Alarm clockOpen the alarm clock tab.To set an alarm, select Options > Set alarm, and enterthe alarm time. When an alarm is active, isdisplayed.To switch off the alarm, select Stop, or to stop the alarmfor 5 minutes, select Snooze. If the alarm time is reachedwhile the device is switched off, the device switchesitself on and starts sounding the alarm tone. If youselect Stop, the device asks whether you want toactivate the device for calls. Select No to switch off thedevice or Yes to make and receive calls. Do not selectYes when wireless phone use may cause interferenceor danger.To change the alarm time, select Options > Resetalarm.To remove the alarm, select Options > Remove alarm.World clockOpen the world clock tab to check the time in differentcities.To add a city to the world clock view, select Options >Add city.To change the city that determines the time and datein your device, select Options > Set as current city. Thecity is displayed in the Clock main view, and the time inyour device is changed according to the city selected.Check that the time is correct and matches your timezone.To remove a city from the list, select Options >Remove.Clock settingsSelect Options > Settings.To change the time or date, select Time or Date.To change the clock shown in the standby modes, selectClock type > Analog or Digital.To allow the mobile phone network to update the time,date, and time zone information to your device(network service), select Network operator time >Auto-update.To change the alarm tone, select Clock alarm tone.47Clock file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 47 Jan 8, 2007 1:39:30 PM
Office applicationsSelect > {No display_text mapping for'qtn_apps_office_grid.menu_diy', locale='en'}.Some office applications may not be available in alllanguages, in which case the application is in English inyour device.Opening a large file may not be possible or it may takea while.File manager Select > {No display_text mapping for'qtn_apps_office_grid.menu_diy', locale='en'} > Filemgr..With File manager, you can manage the contents andproperties of files and folders on your device memoryand memory card. You can open, create, move, copy,rename, send, and search for files and folders. Copyrightprotection may prevent sending some files.Open the device tab or the memory card tab.To select multiple files, scroll to each file, and selectOptions > Mark/Unmark > Mark.To send the selected files, select Options > Send.To move or copy files or folders to another folder, selectOptions > Move to folder or Copy to folder. Defaultfolders such as Sound clips in Gallery cannot be moved.To search for files, select Options > Find. Enter thesearch text, and press the scroll key. The folders and fileswhose names contain the search text are displayed.To view information about the selected file, selectOptions > Details. To view additional informationabout the file online, select Options > Additionaldetails.Search Select > {No display_text mapping for'qtn_apps_office_grid.menu_diy', locale='en'} > {Nodisplay_text mapping for'qtn_title_indevice_search.search', locale='en'}.With Search, you can search for information in yourcontacts, notes, calendar appointments, to-do notes, e-mail messages, multimedia messages, and textmessages. You can also search for files by the file namesin your device memory and memory card.1. Select the content types you want to search in. Toremove the selection, select it again. To include allcontent types in your search, select {No display_textmapping for 'qtn_search_types_select_all.search',locale='en'}. To remove all content types, select {Nodisplay_text mapping for'qtn_search_types_deselect_all.search', locale='en'}.2. Enter your search keywords or some part of thekeywords. To include two words in your search,48Office applicationsfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 48 Jan 8, 2007 1:39:30 PM
separate them with a space. You only find items thatcontain both keywords.3. Select {No display_text mapping for'qtn_softkey_search.search', locale='en'}.Tip: Wildcards may help you find items. In yoursearch keyword, use ? to substitute a singlecharacter, and * to substitute zero or morecharacters. If you use the ? or * wildcard, youmust add * to the beginning and end of asearch keyword, for example *s?all* ("shall") or*dev*ment* ("development").To view the search results from your previous search,select Options > {No display_text mapping for'qtn_options_previous_search.search', locale='en'}.Calculator Select > {No display_text mapping for'qtn_apps_office_grid.menu_diy', locale='en'} >Calculator.Note: This calculator has limited accuracy and isdesigned for simple calculations.To make a calculation, enter the first number of thecalculation. Select a function such as add or subtractfrom the function map. Enter the second number of thecalculation, and select =.The calculator performs operations in the order they areentered. The result of the calculation remains in theeditor field and can be used as the first number of a newcalculation.To save the results of a calculation, select Options >Memory > Save. The saved result replaces thepreviously stored result in the memory.To retrieve the results of a calculation from the memoryand use them in a calculation, select Options >Memory > Recall.To view the last saved result, select Options > Lastresult. Exiting the Calculator application or switching offthe device does not clear the memory. You can recallthe last saved result the next time you open theCalculator application.Nokia Team Suite Select > {No display_text mapping for'qtn_apps_office_grid.menu_diy', locale='en'} > Teamsuite.With Nokia Team Suite, you can create, edit, and deleteteams, and send messages, view teams' web pages andcommunication history, and make phone calls to teams.To create a new team, select Options > Team >Create. Give a name for the team and enter theconference call service information, if needed. Thenselect the members for the team.To select an action, first select the team to which youwant to apply the action, then scroll right to the actionbar, and select the desired action. If you do not want toapply the action to all team members, open the team,and select the desired members. Then select the action.49Office applicationsfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 49 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 49 Jan 8, 2007 1:39:30 PM
To find more actions than are shown on the action bar,select Options > Actions. The following actions areavailable:•Call — Make a phone call to the team or selectedteam members. The team members are called oneby one and put on hold until the calls can be mergedinto a conference call (network service). Themaximum number of participants depends on thenetwork service.•Create message — Send a text message, amultimedia message, or an e-mail to the team orselected team members.•Call conference service — Start a call to theconference call service (network service) defined forthe selected team.•Communication log — View the communication logfor the team or selected team members.•{No display_text mapping for'qtn_team_options_sm_ezynotes.teamuiappezynotesplugin', locale='en'} — Write and read notesrelated to the team.•In-device search — Search for content related to theteam or selected team members.•Push to talk — Communicate through push to talk(network service) with the team or selected teammembers.•Team Web pages — Open the bookmark folder thatcontains the team web pages.To select which actions are shown in the action bar andin which order, select Options > Settings > Actionicons.Edit teamsTo add team members, select Options > Members >Add.To remove team members, select Options >Members > Remove.To edit the details of a member, select Options >Members > Edit.To select whether to see the team members' pictureson the display, select Options > Settings > Viewcontact image.To see to which teams a member belongs, selectOptions > Members > Belongs to teams.Quickoffice Select > {No display_text mapping for'qtn_apps_office_grid.menu_diy', locale='en'} >Quickoffice.Quickoffice consists of Quickword for Microsoft Word,Quicksheet for Microsoft Excel, Quickpoint for MicrosoftPowerPoint, and Quickmanager for purchasingsoftware. You can create, view, and edit Microsoft Office2000, XP, and 2003 documents (*.doc, *.xls and *.ppt)and plain text files (*.txt) with Quickoffice. All fileformats or features are not supported. Apple Macintoshis not supported.To open a file, press the scroll key. Quickoffice opens thefile in the correct application.50Office applicationsfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 50 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 50 Jan 8, 2007 1:39:30 PM
Active notes Select > {No display_text mapping for'qtn_apps_office_grid.menu_diy', locale='en'} > Activenotes.Active notes allows you to create, edit, and viewdifferent kinds of notes, for example, meeting memos,hobby notes, or shopping lists. You can insert images,videos, and sound in the notes. You can link notes toother applications, such as Contacts, and send notes toothers.To create a note, start writing.To create a folder, select Options > Organize > Newfolder.To sort the notes by date and time, name, or size, selectOptions > Organize > Sort by.To move the notes or folders, select the desired itemand Options > Organize > Move to. Select the folderto which you want to move the item.To edit the settings, select Options > Settings.To send the note using a short message, multimediamessage, e-mail, Bluetooth, or infrared, selectOptions > Send.Create and edit notesTo edit a note, scroll to it, and press the scroll key.To insert images, sound clips, video, business cards,web bookmarks, and files, select Options > Insertobject.To add new items to the note, select Options > Insertnew. You can record sound and video clips, and captureimages.To add boldface, italics, or underlining to your text orchange the font color, press and hold the shift key anduse the scroll key to select the text. Then selectOptions > Text.To link a note to a contact, select Options > Link noteto call > Add contacts. You can see the note on thedisplay of your device when making a call to orreceiving a call from the contact.Converter Select > {No display_text mapping for'qtn_apps_office_grid.menu_diy', locale='en'} >Converter.The converter has limited accuracy, and rounding errorsmay occur.Convert measurements1. Scroll to the Type field, and select Options >Conversion type to open a list of measures. Selectthe measure to use, and select OK.2. Scroll to the first Unit field, and select Options >Select unit. Select the unit from which to convert,and select OK. Scroll to the next Unit field, and selectthe unit to which to convert.3. Scroll to the first Amount field, and enter the valueto convert. The other Amount field changesautomatically to show the converted value.51Office applicationsfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 51 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 51 Jan 8, 2007 1:39:30 PM
Set base currency and exchangerateNote: When you change base currency, you mustenter new exchange rates because all previously setexchange rates are cleared.Before you can make currency conversions, you mustchoose a base currency and add exchange rates. Therate of the base currency is always 1. The base currencydetermines the conversion rates of the othercurrencies.1. To set the rate of exchange for the unit of currency,scroll to the Type field, and select Options >Currency rates.2. Scroll to the currency type and enter the exchangerate you would like to set per single unit of currency.3. To change the base currency, scroll to the currency,and select Options > Set as base currency.4. Select Done > Yes to save the changes.After you have inserted all the necessary exchangerates, you can make currency conversions.PDF reader Select > {No display_text mapping for'qtn_apps_office_grid.menu_diy', locale='en'} > AdobeReader.With PDF reader you can read PDF documents on thedisplay of your device; search for text in the documents;modify settings, such as zoom levels and page views;and send PDF files using e-mail.Zip manager Select > {No display_text mapping for'qtn_apps_office_grid.menu_diy', locale='en'}.With Zip manager, you can create new archive files tostore compressed ZIP formatted files; add single ormultiple compressed files or directories to an archive;set, clear, or change the archive password for protectedarchives; and change settings, such as compressionlevel, and file name encoding.You can store the archive files on the device memory oron a memory card.Print You can print a message or file from the device, previewa print job, define page layout options, select a printer,or print to a file. You may not be able to print allmessages, such as multimedia messages or otherspecial messages.To configure a printer for your device, select > {Nodisplay_text mapping for'qtn_apps_office_grid.menu_diy', locale='en'} >Printers > Options > Add. To set the printer as thedefault printer, select Options > Set as default.Before you print, make sure your device is properlyconnected to the printer.To print a message or a file, select Options > Print.52Office applicationsfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 52 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 52 Jan 8, 2007 1:39:30 PM
To print to a file, select Options > Printing options >Print to file, and determine the location for the file.To change the printing options, select Options >Printing options. You can select the printer you want touse, the number of copies and the range of pages youwant to print.To change the page layout before printing, selectOptions > Printing options > Page setup. You canchange the paper size and orientation, define themargins, and insert a header or a footer. The maximumlength of the header and footer is 128 characters.To preview a file or message before you print, selectOptions > Printing options > Preview.Wireless keyboard Select > {No display_text mapping for'qtn_apps_office_grid.menu_diy', locale='en'} >Wireless keybd..Use the Wireless keyboard application to set up a NokiaWireless Keyboard or other compatible wirelesskeyboard supporting the Bluetooth Human InterfaceDevices (HID) profile for use with your device.Connect to the keyboard1. Activate Bluetooth connectivity on your device:select > Connectivity > Bluetooth >Bluetooth > On.2. Switch on the wireless keyboard.3. Select > {No display_text mapping for'qtn_apps_office_grid.menu_diy', locale='en'} >Wireless keybd. > Options > Find keyboard to startsearching for devices with Bluetooth connectivity.4. Select the keyboard from the list, and press the scrollkey to start the connection.5. To pair the keyboard with your device, enter apasscode of your choice (1-9 digits) on the deviceand the same passcode on your keyboard.6. If you are asked for a keyboard layout, select it fromthe list on your device.When the name of the keyboard appears on the devicedisplay, its status changes to Keyboard connected, andthe green indicator of your keyboard blinks slowly; thekeyboard is ready for use.Disconnect the keyboardTo close the Bluetooth connection but keep the Wirelesskeyboard application running, select Options >Keyboard disconnected.To disconnect the keyboard and end the Bluetoothconnection, select > Connectivity > Bluetooth >Bluetooth > Off.For details on the operation and maintenance of yourkeyboard, see its user guide.Notes Select > {No display_text mapping for'qtn_apps_office_grid.menu_diy', locale='en'} > Notes.You can create and send notes to other compatibledevices, and save received plain text files (.txt format)to Notes.53Office applicationsfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 53 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 53 Jan 8, 2007 1:39:30 PM
To write a new note, select Options > New note.To send the note to compatible devices, selectOptions > Send.To view notes that are added as descriptions tocalendar entries, open the calendar entry. SelectDescription:.To edit the note, select Options > Edit.54Office applicationsfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 54 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 54 Jan 8, 2007 1:39:30 PM
ConnectivityYour device offers several options to connect to theinternet, a corporate intranet, or to another device orcomputer. Wireless methods include wireless LAN,Bluetooth, and infrared. Your device supports a wiredsolution with a USB (Universal Serial Bus) cableconnection for Nokia PC Suite. Your device also allowsyou to communicate using net calls (Voice over IP), pushto talk, instant messaging (chat), and modem-basedconnections.Modem Select > Connectivity > Modem.Together with a compatible computer, you can use yourdevice as a modem to connect to the web.Before you can use your device as a modem•You need the appropriate data communicationssoftware on your computer.•You must subscribe to the appropriate networkservices from your service provider or internetservice provider.•You must have the appropriate drivers installed onyour computer. You must install drivers for the cableconnection, and you may need to install or updateBluetooth or infrared drivers.To connect the device to a compatible computer usinginfrared, press the scroll key. Make sure the infraredports of the device and computer are directly facingeach other with no obstacles between them.To connect your device to a computer using Bluetoothwireless technology, initiate the connection from thecomputer. To activate Bluetooth in your device, select > Connectivity > Bluetooth and select Bluetooth >On.If you use a cable to connect your device to a computer,initiate the connection from the computer.You may not be able to use some of the othercommunication features when the device is used as amodem.Cable connection Select > Connectivity > USB.Using a USB data cable, you can connect your device toa compatible computer. Connect the USB data cable tothe USB connector of the device. To change the devicetype you normally connect to your device with the datacable, press the scroll key.Install Nokia PC Suite to your computer before you usea cable connection, as Nokia PC Suite automaticallyinstalls the USB data cable driver to your computer. Youcan use the Data transfer mode without installing theUSB data cable drivers.55Connectivityfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 55 Jan 8, 2007 1:39:30 PM
To use your device as a modem, start Nokia PC Suite onyour computer, connect the computer to your devicewith the data cable, and select PC Suite.Transfer data from a computer1. Make sure that you have selected USB as aconnection type in the Manage connections settingsin Nokia PC Suite.2. Insert a memory card to your device and connectthe device to a compatible computer with the USBdata cable.3. When the device asks which mode is used, selectData transfer. In this mode, you can see your deviceas a removable hard drive in your computer.4. End the connection from the computer (forexample, from an Unplug or Eject Hardware wizardin Windows) to avoid damaging the memory card.Connection manager Select > Connectivity > Conn. mgr..To see the open data connections, select Active dataconnections. You can see the data calls, packet dataconnections, and WLAN connections.To view detailed information about networkconnections, select a connection from the list andOptions > Details. The type of information showndepends on the connection type.To end the selected network connection, selectOptions > Disconnect.To end all active network connections simultaneously,select Options > Disconnect all.Search for WLANTo search for WLANs available within range, selectAvailable WLAN networks. The available WLAN viewshows a list of WLANs within range, their network mode(infrastructure or ad-hoc), signal strength and networkencryption indicators, and if your device has an activeconnection with the network.To view the details of a network, scroll to it, and pressthe scroll key.To create an internet access point for a network, selectOptions > Define access point.Bluetooth This device is compliant with Bluetooth Specification2.0 supporting the following profiles: Dial-upNetworking Profile, Object Push Profile, File TransferProfile, Handsfree Profile, Headset Profile, BasicImaging Profile, SIM Access Profile, Generic ObjectExchange Profile, Generic Access Profile, Generic Audio/Video Distribution Profile, Advanced Audio DistributionProfile, and Audio/Video Remote Control Profile. Toensure interoperability between other devicessupporting Bluetooth technology, use Nokia approvedenhancements for this model. Check with themanufacturers of other devices to determine theircompatibility with this device.Select > Connectivity > Bluetooth.56Connectivityfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 56 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 56 Jan 8, 2007 1:39:30 PM
Bluetooth technology enables wireless connectionsbetween electronic devices within a range of 10 meters(33 feet). A Bluetooth connection can be used to sendimages, videos, text, business cards, calendar notes, orto connect wirelessly to devices using Bluetoothtechnology, such as computers.Since devices using Bluetooth technologycommunicate using radio waves, your device and theother devices do not need to be in direct line-of-sight.The two devices only need to be within a maximum of10 meters of each other, although the connection canbe subject to interference from obstructions such aswalls or other electronic devices.Several Bluetooth connections can be active at a time.For example, if your device is connected to a headset,you can also transfer files to another compatible deviceat the same time.Send and receive data withBluetoothThere may be restrictions on using Bluetoothtechnology in some locations. Check with your localauthorities or service provider.Features using Bluetooth technology, or allowing suchfeatures to run in the background while using otherfeatures, increase the demand on battery power andreduce the battery life.1. When you activate Bluetooth for the first time, youare asked to give a name to your device. Give yourdevice a unique name to make it easy to recognizeif there are several Bluetooth devices in the vicinity.2. Select Bluetooth > On.3. Select My phone's visibility > Shown to all or Defineperiod. If you select Define period, you need todefine the time during which your device is visibleto others. Your device and the name you entered cannow be seen by other users with devices usingBluetooth technology.4. Open the application where the item you want tosend is stored.5. Select the item, and select Options > Send > ViaBluetooth. The device searches for other devicesusing Bluetooth technology within range and liststhem.Tip: If you have sent data using Bluetoothbefore, a list of the previous search resultsis displayed. To search for more Bluetoothdevices, select More devices.6. Select the device with which you want to connect.If the other device requires pairing before data canbe transmitted, you are asked to enter a passcode.When the connection has been established, Sendingdata is shown.The Sent folder in the Messaging application does notstore messages sent using Bluetooth connectivity.To receive data using Bluetooth, select Bluetooth >On and My phone's visibility > Shown to all to receivedata from a non-paired device or Hidden to receive datafrom a paired device only. When you receive datathrough Bluetooth, a tone sounds, and you are asked ifyou want to accept the message in which the data is57Connectivityfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 57 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 57 Jan 8, 2007 1:39:30 PM
included. If you accept, the message is placed in theInbox folder in the Messaging application.Tip: You can access the files in the device or onthe memory card using a compatible accessorythat supports the File Transfer Profile Clientservice (for example, a laptop computer).A Bluetooth connection is disconnected automaticallyafter sending or receiving data. Only Nokia PC Suite andsome enhancements such as headsets may maintain aconnection even if not actively used.Pair devicesOpen the paired devices tab.Before pairing, create your own passcode (1-16 digits),and agree with the user of the other device to use thesame code. Devices that do not have a user interfacehave a fixed passcode. You need the passcode onlywhen you connect the devices for the first time. Afterpairing, it is possible to authorize the connection.Pairing and authorizing the connection makesconnecting quicker and easier, as you do not have toaccept the connection between paired devices everytime you establish a connection.The passcode for remote SIM access must have 16 digits.1. Select Options > New paired device. The devicestarts to search for Bluetooth devices within range.If you have sent data using Bluetooth before, a listof the previous search results is displayed. To searchfor more Bluetooth devices, select More devices.2. Select the device with which you want to pair, andenter the passcode. The same passcode must beentered to the other device as well.3. Select Yes to make the connection between yourdevice and the other device automatic, or No toconfirm the connection manually every time aconnection attempt is made. After pairing, thedevice is saved to the paired devices page.To give a nickname to the paired device, selectOptions > Assign short name. The nickname is onlydisplayed in your device.To delete a pairing, select the device whose pairing youwant to delete and Options > Delete. To delete allpairings, select Options > Delete all. If you are currentlyconnected to a device and cancel the pairing with thatdevice, pairing is removed immediately, and theconnection is ended.To allow a paired device to connect automatically toyour device, select Set as authorized. Connectionsbetween your device and the other device can be madewithout your knowledge. No separate acceptance orauthorization is needed. Use this status for your owndevices, such as your compatible headset or computer,or devices that belong to someone you trust. If youwant to accept connection requests from the otherdevice separately every time, select Set asunauthorized.To use a Bluetooth audio enhancement such as aBluetooth handsfree or headset, you need to pair yourdevice with the enhancement. See the enhancementuser guide for the passcode and further instructions. Toconnect to the audio enhancement, switch on the58Connectivityfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 58 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 58 Jan 8, 2007 1:39:30 PM
enhancement. Some audio enhancements connectautomatically to your device. Otherwise open thepaired devices tab, scroll to the enhancement, andselect Options > Connect.Security tipsWhen you are not using Bluetooth connectivity, selectBluetooth > Off or My phone's visibility > Hidden.Do not pair with an unknown device.Bluetooth connectivity indicators Bluetooth is active. When the icon is blinking, your device is trying toconnect to the other device. When the icon is showncontinuously, the Bluetooth connection is active.SIM access profileWhen the wireless device is in the remote SIM mode,you can only use a compatible connected enhancement,such as a car kit, to make or receive calls. Your wirelessdevice will not make any calls, except to the emergencynumbers programmed into your device, while in thismode. To make calls from your device, you must firstleave the remote SIM mode. If the device has beenlocked, enter the lock code to unlock it first.With the SIM access profile, you can access the SIM cardof your device from a compatible car kit device. Thisway, you do not need a separate SIM card to access SIMcard data and connect to the GSM network.To use the SIM access profile, you need the following:•Compatible car kit device that supports Bluetoothwireless technology•Valid SIM card in your Nokia Exx CommunicatorFor more information about car kit devices andcompatibility with your Nokia Exx Communicator, seewww.nokia.com and your car kit user guide.Use the SIM access profile1. Select > Connectivity > Bluetooth > RemoteSIM mode > On.2. Activate Bluetooth in the car kit device.3. Use your car kit device to start a search forcompatible devices. For instructions, see the userguide of your car kit device.4. Select your Nokia Exx Communicator from the list ofcompatible devices.5. To pair the devices, enter the Bluetooth passcodeshown on the display of the car kit device to yourNokia Exx Communicator.Tip: If you have already accessed the SIM cardfrom the car kit with the active user profile, thecar kit searches automatically for a device withthe SIM card. If it finds your Nokia ExxCommunicator, and automatic authorization isactivated, the car kit automatically connects tothe GSM network when you switch on the carignition.59Connectivityfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 59 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 59 Jan 8, 2007 1:39:30 PM
When you activate the remote SIM access profile, youcan use applications on your device that do not neednetwork or SIM services.To make connections between your device and the carkit device without separate acceptance orauthorization, select > Connectivity > Bluetooth,and open the paired devices tab. Scroll to the car kitdevice, press the scroll key, and enter the Bluetoothpasscode. When the device asks to make the connectionautomatic, select Yes. If you select No, connectionrequests from this device must be accepted separatelyevery time.To end the remote SIM access connection from yourdevice, select > Connectivity > Bluetooth >Remote SIM mode > Off.Infrared Do not point the infrared (IR) beam at anyone's eye orallow it to interfere with other IR devices. This device isa Class 1 laser product.Use infrared to connect two devices and transfer databetween them. With infrared, you can transfer datasuch as business cards, calendar notes, and media fileswith a compatible device.Send and receive data1. Ensure that the infrared ports of the devices faceeach other. The positioning of the devices is moreimportant than the angle or distance.2. Select > Connectivity > Infrared to switch oninfrared on your device.3. Switch on infrared on the other device and wait afew seconds until the infrared connection isestablished.4. Locate the desired file in an application or Filemanager, and select Options > Send > Viainfrared.If the data transfer is not started within 1 minute afterthe activation of the infrared port, the connection iscancelled and must be started again.All items received through infrared are placed in theInbox folder in Messaging.Positioning the devices away from each other breaksthe connection, but the infrared light beam remainsactive on your device until it deactivates.Internet access pointsAn access point is where your device connects to anetwork. To use e-mail and multimedia services or toconnect to the internet and browse web pages, youmust first define the internet access point for theseservices. You may need to set up several internet accesspoints, depending on the sites you want to access. Forexample, browsing the web may require one accesspoint, and accessing your company intranet mayrequire another. To connect to the internet over GPRS,your device may have predefined, default internetaccess point settings.When you switch on your device for the first time, theaccess points may be configured automatically basedon the service provider information in your SIM card.You can also receive the access point settings in a60Connectivityfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 60 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 60 Jan 8, 2007 1:39:30 PM
message from your service provider. This might reducethe number of settings you need to enter yourself.The available options may vary. Some or all accesspoints may be preset for your device by your serviceprovider. You may not be able to add, edit, or deleteaccess points. Contact your service provider and e-mailservice provider for more information on access pointsand their settings.Set up an internet access point fordata calls1. Select > Tools > Settings > Connection >Access points.2. Select Options > New access point. To use anexisting access point as a basis for the new one,select Use existing settings. To start with an emptyaccess point, select Use default settings.3. Define the following settings.•Connection name — Enter a descriptive name forthe connection.•Data bearer — Select Data call or High speed(GSM).•Dial-up number — Enter the modem telephonenumber of the access point. Use + beforeinternational numbers.•User name — Enter your user name if requiredby the service provider. User names are oftencase-sensitive and provided by your serviceprovider.•Prompt password — Select Yes to enter yourpassword each time you log into a server or Noto save the password in your device memory andautomate the login.•Password — Enter your password if required bythe service provider. The password is often case-sensitive and provided by the service provider.•Authentication — Select Secure to send yourpassword always encrypted or Normal to sendyour password encrypted when possible.•Homepage — Enter the web address of the pageyou want to display as the home page when youuse this access point.•Data call type — Select Analog, ISDN v.110, orISDN v.120.•Maximum data speed — Select the limit to applyto the transfer speed. If you select Automatic, thedata transfer rate is determined by the networkand may be affected by network traffic. Someservice providers may charge more for higherdata rates.4. After defining the basic settings, select Options >Advanced settings to define the advanced settingsor Back to save the settings and exit.Set up an internet access point forpacket data (GPRS)1. Select > Tools > Settings > Connection >Access points.2. Select Options > New access point. To use anexisting access point as a basis for the new one,select Use existing settings. To start with an emptyaccess point, select Use default settings.3. Define the following settings.61Connectivityfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 61 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 61 Jan 8, 2007 1:39:30 PM
•Connection name — Enter a descriptive name forthe connection.•Data bearer — Select Packet data.•Access point name — Enter the name for theaccess point. The name is usually provided byyour service provider.•User name — Enter your user name if requiredby the service provider. User names are oftencase-sensitive and provided by your serviceprovider.•Prompt password — Select Yes to enter yourpassword each time you log into a server or Noto save the password in your device memory andautomate the login.•Password — Enter your password if required bythe service provider. The password is often case-sensitive and provided by the service provider.•Authentication — Select Secure to send yourpassword always encrypted, or Normal to sendyour password encrypted when possible.•Homepage — Enter the web address of the pageyou want to display as the home page when youuse this access point.4. After defining the settings, select Options >Advanced settings to define the advanced settingsor Back to save the settings and exit.For information on the advanced settings, see theextended user guide on the web.62Connectivityfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 62 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 62 Jan 8, 2007 1:39:30 PM
Wireless local area networkSome places, like France, have restrictions on the use ofwireless LAN. Check with your local authorities for moreinformation.Your device can detect and connect to a wireless localarea network (WLAN). To use WLAN, a network must beavailable in the location and your device must beconnected to it.See WLAN availabilityTo have your device show WLAN availability, select >Tools > Settings > Connection > Wireless LAN >Options > Advanced settings > Show WLANavailability.If WLAN is available, is shown on the display.Tip: You can also scan for networks in range.WLAN connectionsImportant: Always enable one of the availableencryption methods to increase the security of yourwireless LAN connection. Using encryption reduces therisk of unauthorized access to your data.To use WLAN, you must create an internet access point(IAP) in a WLAN. Use the access point for applicationsthat need to connect to the internet. A WLAN connectionis established when you create a data connection usinga WLAN internet access point. The active WLANconnection is ended when you end the data connection.You can also end the connection manually. See"Connection manager " on page 56.You can use WLAN during a voice call or when packetdata is active. You can only be connected to one WLANaccess point device at a time, but several applicationscan use the same internet access point.When the device is in the Offline profile, you can still useWLAN (if available). Remember to comply with anyapplicable safety requirements when establishing andusing a WLAN connection.If you move the device to another location within theWLAN and out of range of a WLAN access point, theroaming functionality can automatically connect yourdevice to another access point that belongs to the samenetwork. As long as you remain within range of accesspoints that belong to the same network, your devicecan stay connected to the network.Tip: To check the unique media access control(MAC) address that identifies your device, forexample to configure the MAC address of yourdevice to a WLAN router, enter *#62209526#on the device keypad. The MAC address isshown on the device display.63Wireless local area networkfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 63 Jan 8, 2007 1:39:30 PM
WLAN wizard Select > Connectivity > WLAN wiz..The WLAN wizard helps you find and connect to awireless LAN. When you open the application, yourdevice starts to scan for available WLANs and lists them.To update the list of available WLANs, select Options >Refresh.To start or continue browsing the web using the accesspoint of the WLAN, scroll to the desired network, andselect Options > Start Web browsing or Cont. Webbrowsing.To disconnect the active connection to the WLAN, selectOptions > Disconnect WLAN.To view the details of the WLAN, select Options >Details.To define an internet access point for the selectedWLAN, select Options > Define access point.Always enable one of the available encryption methodsto increase the security of your WLAN connection. Usingencryption reduces the risk of unauthorized access toyour data.Use the wizard in the active standby modeIn the active standby mode, the WLAN wizard shows thestatus of your WLAN connections and network searches.To view the available options, scroll to the row showingthe status, and press the scroll key. Depending on thestatus, you can start the Web browser using a WLANconnection, disconnect from a WLAN, search for WLANs,or set the network scanning on or off.If WLAN scanning is off and you are not connected toany WLAN, WLAN scanning off is displayed in the activestandby mode. To set scanning on and search foravailable WLANs, scroll to the row showing the status,and press the scroll key.To start a search for available WLANs, scroll to the rowshowing the status, press the scroll key, and selectSearch for WLAN. To set WLAN scanning off, scroll to therow showing the status, press the scroll key, and selectSwitch WLAN scan off.When Start Web browsing is selected, the WLAN wizardautomatically creates an internet access point for theselected WLAN. The access point can also be used withother applications requiring WLAN connection.If you select a secured WLAN, you are asked to enter therelevant passcodes. To connect to a hidden network,you must enter the correct hidden service set identifier(SSID).WLAN access pointsTo search for WLANs available within range, select >Connectivity > WLAN wiz.. To create an internet accesspoint in a WLAN, select Options > Define access point.To view the details of a network shown in the list, selectOptions > Details.When an application asks you to select an access point,select the created access point. You can also create aninternet access point by selecting Search for WLAN, oruse Connection manager to create internet accesspoints. See "Connection manager " on page 56.64Wireless local area networkfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 64 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 64 Jan 8, 2007 1:39:30 PM
Set up an internet accesspoint for WLAN manually1. Select > Tools > Settings > Connection >Access points.2. Select Options > New access point. To use anexisting access point as a basis for the new one,select Use existing settings. To start with an emptyaccess point, select Use default settings.3. Define the following settings.•Connection name — Enter a descriptive name forthe connection.•Data bearer — Select Wireless LAN.•WLAN network name — To enter the service setidentifier (SSID), that is, the name that identifiesthe specific WLAN, select Enter manually. Toselect the network from the WLANs in range,select Search for networks.•Network status — Select Hidden if the networkyou are connecting to is hidden or Public if it isnot hidden.•WLAN network mode — If you selectInfrastructure, devices can communicate witheach other and with wired LAN devices througha WLAN access point. If you select Ad-hoc, devicescan send and receive data directly with eachother, and no WLAN access point is needed.•WLAN security mode — You must select the samesecurity mode that is used in the WLAN accesspoint. If you select WEP (wired equivalentprivacy), 802.1x, or WPA2 (Wi-Fi protectedaccess), you must also configure the relevantadditional settings. See the extended user guideon the web or the device help for moreinformation.•WLAN security settings — Edit the securitysettings for the selected WLAN security mode.•Homepage — Enter the web address of the pageyou want to display as the home page when youuse this access point.WLAN settingsSee "WLAN settings" on page 87.65Wireless local area networkfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 65 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 65 Jan 8, 2007 1:39:30 PM
Web Select > Web.To browse the web (network service), you need toconfigure the internet access point settings. If you areusing a data call or GPRS connection, your wirelessnetwork must support data calls or GPRS, and the dataservice must be activated for your SIM card.Check the availability of services, pricing, and fees withyour service provider. Service providers also give youinstructions on how to use their services.Access pointsYour device might have configured the internet accesspoint settings automatically based on your SIM card. Ifnot, contact your service provider for the correctsettings.Tip: You may receive the internet access pointsettings from your service provider as a specialtext message or from the web page of theservice provider.You can also enter the internet access point settingsmanually. See "Internet access points" on page 60.Browse the webTo browse the web, select a bookmark or enter the webaddress manually. Use only services that you trust andthat offer adequate security and protection againstharmful software.Tip: When you start to enter the address, theaddresses of the pages you have previouslyvisited that match your input are displayed. Toopen a page, scroll to its address, and press thescroll key.To move on a web page, use the scroll key, which isshown as a pointer on the page. When you move thepointer over a link, the pointer changes into a hand.Press the scroll key to open the link. On a web page, newlinks usually appear underlined in blue and previouslyvisited links in purple. Images that act as links have ablue border around them.The addresses of the pages you visit are saved in theAuto. bookmarks folder.BookmarksYour device may have preinstalled bookmarks and linksfor third-party internet sites. You may also access otherthird-party sites through your device. Third-party sitesare not affiliated with Nokia, and Nokia does notendorse or assume liability for them. If you choose toaccess such sites, you should take precautions forsecurity or content.To view a bookmarked web page, scroll to thebookmark, and press the scroll key.66Web file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 66 Jan 8, 2007 1:39:30 PM
To browse to another web page, select Options >Navigation options > Go to web address, enter thepage address, and select Go to.To organize your bookmarks, select Options >Bookmark manager in the Web main view. You canmove and edit bookmarks, and create new folders.To add a bookmark, select Options > Bookmarkmanager > Add bookmark, and define the following:•Name — Give a descriptive name for the bookmark.•Address — Enter the web page address.•Access point — Define the access point to connect tothe web page.•User name — Enter your user name, if required bythe service provider.•Password — Enter your password, if required by theservice provider.End a connectionTo end the connection and view the browser pageoffline, select Options > Advanced options >Disconnect. To end the connection and close thebrowser, select Options > Exit.Clear the cacheA cache is a memory location that is used to store datatemporarily. If you have tried to acce ss or have accesse dconfidential information requiring passwords, emptythe cache after each use. The information or servicesyou have accessed are stored in the cache.To empty the cache, select Options > Advancedoptions > Clear cache.Web settingsSelect Options > Settings. The Web settings are dividedinto four groups:•General contains access point and home pagerelated settings.•Page contains imaging, audio, and pop-up settings.•Privacy contains settings related your privacy.•Web feeds contains settings related to web feedsand blogs.67Web file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 67 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 67 Jan 8, 2007 1:39:30 PM
Global Positioning System (GPS) Select > {No display_text mapping for'qtn_apps_gpsfolder_grid', locale='en'}.The Global Positioning System (GPS) is a worldwideradio navigation system that includes 24 satellites andtheir ground stations that monitor the operation of thesatellites.A GPS terminal, such as the GPS receiver in the Nokia ExxCommunicator, receives low-power radio signals fromthe satellites, and measures the travel time of thesignals. From the travel time, the GPS receiver cancalculate its location to the accuracy of meters.Coordinates are expressed in degrees and decimaldegrees format using the WGS-84 coordinate system.The Global Positioning System (GPS) is operated by thegovernment of the United States, which is solelyresponsible for its accuracy and maintenance. Theaccuracy of location data can be affected byadjustments to GPS satellites made by the United Statesgovernment and is subject to change with the UnitedStates Department of Defense civil GPS policy and theFederal Radionavigation Plan. Accuracy can also beaffected by poor satellite geometry. Availability andquality of GPS signals may be affected by your location,buildings, natural obstacles, and weather conditions.The GPS receiver should only be used outdoors to allowreception of GPS signals.GPS should only be used as a navigation aid. It shouldnot be used for precise location measurement and youshould never rely solely on location data from the GPSreceiver for positioning or navigation.The trip meter has limited accuracy, and roundingerrors may occur. Accuracy can also be affected byavailability and quality of GPS signals.Maps Select > {No display_text mapping for'qtn_apps_gpsfolder_grid', locale='en'} > Maps.With Maps, you can see your current location on themap, browse maps for different cities and countries,search for addresses and different points of interest,and plan routes from one location to another. You canalso purchase extra services, such as city guides and anavigation service with voice guidance.Basic world maps are currently available through Mapsand are downloaded to your device when you use theapplication. Some maps may be delivered with thedevice. The map coverage and availability may vary.Browse mapsWhen you open Maps, you see an overview of the globe.When your device finds the satellite signal, Maps startsto locate your device, and zooms in to your currentlocation. At the same time, Maps downloads the map ofyour current location. The downloaded maps are68Global Positioning System (GPS) file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 68 Jan 8, 2007 1:39:30 PM
automatically saved in the device memory or a memorycard.When you browse the map on the display, a new mapis downloaded automatically. All the maps downloadedby Maps are free of charge, but downloading mayinvolve the transmission of large amounts of datathrough your service provider network. For moreinformation on data transmission charges, contact yourservice provider.Your current location is indicated on the map. Thecompass rose shows the orientation of the map, whichis towards north by default.To move on the map, scroll up, down, left, or right. Toview detailed information of a location on the map,press the scroll key and select Details. To return to yourcurrent location, select Options > Current location.To zoom in or out on the map, press * or #.To switch between the 2-D and 3-D views, press 0.To define what kind of points of interest are shown onthe map, select Options > View > Categories and thedesired categories.To view points of interest near your current location,select Options > Find > Near current location. To findpoints of interest near other locations, move on themap, and select Options > Find > Near focusedlocation.Save locationsTo take a screenshot of your location, select Savelocation > As image. The screenshot is saved in Gallery.To save a location as a landmark in Favorites, press thescroll key, and select Save location > As landmark. Entera name for the landmark, and select the categories inwhich you want to include it.To view saved landmarks, select Options > Favorites.To send a landmark to a compatible device, selectFavorites > Options > Landmark location > Sendlocation. If you send the landmark in a text message,the information is converted to plain text.Maps settingsTo check whether the maps that are downloaded toyour device have been updated on the map server,select Options > Settings > Network > Options >Check for map updates.To prevent the device from automatically downloadingmaps through the internet, for example, when you areoutside your home cellular network, select Options >Settings > Network > Use network > Off.To adjust the size of the cache that is used for savingmaps, select Options > Settings > Max memory carduse (%). This option is available only when a memorycard is inserted. When the memory is full, the oldestmap is deleted. The cache cannot be emptied.To view the number and signal strength of satelliteswhen you are using Maps, select Options > View >Satellite info.69Global Positioning System (GPS) file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 69 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 69 Jan 8, 2007 1:39:30 PM
Search for locationsTo search for a point of interest by name, selectOptions > Find > By name, or start entering the firstletters of the name, and select Search.To search for a location, select Options > Find > Byaddress. You must enter the city and country. To use anaddress you have saved in Contacts, select Options >Find > By address > Options > Select from contacts.To view the search result on a map, press the scroll key.To switch between search results, scroll up or down. Tomove on the map, select Options > Full screen, and usethe scroll key.Plan a routeTo plan a route from one location to another, selectOptions > Plan route. Select the start and end point forthe route, and select Options > Show route to showthe route on the maps downloaded in your device orSearch route online to use online map data.Tip: The Search route online option accesses allavailable map data on the server and mayprovide a more accurate route.To adjust the routing settings, such as the priority ofthe route or the mode of transportation, selectOptions > Settings > Routing.To view the itinerary of the route, select Options >Route details, and scroll right. To view locations on themap, select Options > Show on map.To run a simulation of the created route, selectOptions > Start simulation.To return to the main map view, select Options > Fullscreen.GPS data This feature is not designed to support positioningrequests for related calls. Contact your service providerfor more information about how your phone complieswith government regulations on location basedemergency calling services.GPS should only be used as a navigation aid. It shouldnot be used for precise location measurement and youshould never rely solely on location data from the GPSreceiver for positioning or navigation.Select > {No display_text mapping for'qtn_apps_gpsfolder_grid', locale='en'} > GPS data.With GPS data, you can view your current location, findyour way to a desired location, and track distance.Select Navigation to view navigating information toyour trip destination, Position to view positioninginformation about your current location, or Trip dist. toview your traveling information such as the distanceand duration you have traveled, and your average andmaximum speeds.The application must receive positioning informationfrom at least three satellites to be used as a travelingaid.To select a positioning method to detect the location ofyour device, select Options > Positioning settings,70Global Positioning System (GPS) file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 70 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 70 Jan 8, 2007 1:39:30 PM
scroll to the desired positioning method, and selectOptions > Enable.To check the signal strength of the satellites thatprovide the positioning information necessary fornavigation, open any of the three views and selectOptions > Satellite status.To set a landmark or location as the destination of yourtrip, select Navigation > Options > Set destination.You can also enter the destination latitude andlongitude coordinates.To remove the destination set for your trip, selectNavigation > Options > Stop navigation.To save your current position as a landmark, selectNavigation or Position, and Options > Save position.To activate the trip meter, select Trip dist. > Options >Start. To stop the trip meter, select Options > Stop.To reset all fields and start calculating the trip again,select Trip dist. > Options > Restart.To change the measuring system in use, selectOptions > Settings > Measurement system > Metricor Imperial.To enter the altitude calibration to correct the altitudereceived from the positioning satellites, selectOptions > Settings > Altitude calibration.Landmarks Select > {No display_text mapping for'qtn_apps_gpsfolder_grid', locale='en'} > Landmarks.Landmarks are coordinates to geographic locationsthat you can save to your device for later use in differentlocation-based services. You can create landmarksusing the internal GPS receiver of your device ornetwork (network service).To create a landmark, select Options > Newlandmark. Select Current position to make a networkrequest for the latitude and longitude coordinates ofyour current location, Use map to select the locationfrom a map, or Enter manually to fill in necessarylocation information such as a name, category, address,latitude, longitude, and altitude.To show the landmark on the map, select Options >Show on map.71Global Positioning System (GPS) file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 71 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 71 Jan 8, 2007 1:39:30 PM
Business voice applicationsPush to talk Select > Connectivity > PTT.Push to talk (PTT) (network service) provides directvoice communication connected with the push of a key.With push to talk, you can use your device as you woulduse a walkie-talkie.You can use push to talk to have a conversation withone person or with a group of people, or to join achannel. A channel is like a chat room: you can call thechannel to see if anyone is online. The channel call doesnot alert the other users; the users just join the channeland start speaking with each other.In push-to-talk communication, one person talks whilethe other users listen through the built-in loudspeaker.Users take turns responding to each other. Because onlyone user can talk at a time, the maximum duration ofa speech turn is limited. For details of the speech turnduration for your network, contact your serviceprovider.Before you can use push to talk, you must define thepush-to-talk access point and push-to-talk settings. Youmay receive the settings in a message from the serviceprovider that offers the push-to-talk service.Phone calls always take priority over push to talk.Push-to-talk settingsSelect Options > Settings and select User settings todefine your preferences for push to talk, or Connectionsettings to change the connection details. Contact yourservice provider for the correct settings.The settings available for editing may vary.Log in to push-to-talk serviceIf you have set Application start-up on in Usersettings, push to talk automatically logs in to the servicewhen started. If not, you must log in manually.To log in to push-to-talk service manually, selectOptions > Log in to PTT.When the Ringing type setting of your device is set toBeep once or Silent, or there is an ongoing phone call,you cannot make or receive push-to-talk calls.Make a push-to-talk callWarning: Do not hold the device near your earwhen the loudspeaker is in use, because the volumemay be extremely loud.To make a push-to-talk call, select Options > Contacts,select one or several contacts from the list, and pressthe voice key. Remember to hold the device in front of72Business voice applicationsfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 72 Jan 8, 2007 1:39:30 PM
you during a push-to-talk call so you can see the display.The display informs you when it is your turn to speak.Speak towards the microphone, and do not cover theloudspeaker with your hands. Press and hold the voicekey the entire time you are talking. When you havefinished talking, release the key.To end the push-to-talk call, press the end key.When you receive a push-to-talk call, press the call keyto answer the call or the end key to dismiss the call.Manage PTT contactsTo view, add, modify, delete, or call contacts, selectOptions > Contacts. A list of names from the Contactsapplication is displayed with information about theirlogin status.To call a selected contact, select Options > Talk 1 to 1.To make a group call, select several contacts andOptions > Talk to many.To send the contact a request to call you, selectOptions > Send callback request.To answer a callback request, select Show to open thecallback request. To make a push-to-talk call to thesender, press the voice key.Create a PTT channelTo create a channel, select Options > New channel >Create new.To register the channel to the push-to-talk service,select Options > Register.To join a channel, select the channel you want to talkto, and press the voice key.To invite a user to a channel, select Options > Sendinvitation.To view the currently active users of a channel, selectOptions > Active members.To view more information about a selected user, selectOptions > Contact details.When you log in to push to talk, push to talkautomatically connects to the channels that were activewhen the application was last closed.Exit push to talkTo exit push to talk, select Options > Exit. Select Yes tolog out and close the service. Select No if you want tokeep the application active in the background.Recorder Select > Media > Recorder.With Recorder, you can record up to 60 seconds of avoice memo, save the voice recording as a sound clip,and play the sound clip. Recorder supports the AMR fileformat.Press the voice key to activate Recorder. If you havelogged in to push to talk, the voice key works as a push-to-talk key and does not activate Recorder.73Business voice applicationsfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 73 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 73 Jan 8, 2007 1:39:30 PM
To record a voice memo, select Options > Record soundclip. Select Pause to pause the recording, and Record toresume recording. When you finish recording, selectStop. The sound clip is automatically saved to the Soundclips folder in Gallery.The maximum length of a voice recording is 60 seconds,but it also depends on the storage space available inthe device memory or on a memory card.Play a voice recordingTo listen to a voice recording that you just recorded,select Play. The progress bar displays the playing time,position, and length of the voice recording. SelectStop to cancel the playback.To pause the playback of a voice recording, selectPause. Playback resumes when you select Play.Voice recorder settingsVoice recordings are automatically saved to the devicememory unless you change the default location. Voicerecordings that you create or receive after you changethe settings are affected.To change the default location of saved voicerecordings, select Options > Settings > Memory inuse.To define the recording quality, select Options >Recording quality.Tip: Waveform files (.wav) are a more commonaudio file format, but adaptive multirate files(.amr) are smaller for comparable soundquality.Voice aid Select > Tools > Voice aid.The Voice aid application reads text on the screen,allowing you to use the basic functions of your devicewithout looking at the display.To hear the entries in your contacts list, selectContacts. Do not use this option if you have more than500 contacts.To hear information on your missed and received calls,dialed numbers, and frequent calls, select Recent calls.To listen to your voice messages, select Voice mailbox.To dial a telephone number, select Dialer.To hear the current time, select Clock > Time. To hearthe current date, select Clock > Date.To hear more options, select Options.Speech Select > Tools > Speech.With Speech, you can set the language, voice, and voiceproperties for the message reader.To set the language for the message reader, selectLanguage.74Business voice applicationsfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 74 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 74 Jan 8, 2007 1:39:30 PM
To set the speaking voice, select Voice. The voice islanguage-dependent.To set the speaking rate, select Voice settings >Speed.To set the speaking volume, select Voice settings >Volume.To listen to a voice, open the voice tab, select the voice,and select Play voice.Voice commands Select > Tools > Voice comm..Use voice commands to make phone calls and launchapplications, profiles, or other functions on the device.The device creates a voice tag for the entries in Contactsand for the functions designated in the Voicecommands application. When a voice command isspoken, the device compares the spoken words to thevoice tag in the device. Voice commands are notdependent on a speaker’s voice; however, the voicerecognition in the device adapts to the main user’svoice to recognize voice commands better.Make a callA voice tag for a contact is the name or nickname thatis saved on the contact in Contacts.To listen to a voice tag, open a contact, and selectOptions > Play voice tag.1. To make a call using a voice command, press andhold the voice key.2. When you hear the tone or see the visual display,clearly speak the name saved on the contact.3. The device plays a synthesized voice tag for therecognized contact in the selected device language,and displays the name and number. After a timeoutof 1.5 seconds, the device dials the number. If therecognized contact was not correct, select Next toview a list of other matches or Quit to cancel dialing.If several numbers are saved under the contact, thedevice selects the default number, if it has been set.Otherwise, the device selects the first availablenumber of the following fields: Mobile, Mobile(home), Mobile (work), Telephone, Tel. (home), andTel. (work).Launch an applicationThe device creates voice tags for the applications listedin the Voice commands application.To launch an application using a voice command, pressand hold the voice key, and clearly speak the name ofthe application. If the recognized application was notcorrect, select Next to view a list of other matches orQuit to cancel.To add more applications to the list, select Options >New application.To change the voice command of an application, selectOptions > Change command, and enter the newcommand.75Business voice applicationsfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 75 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 75 Jan 8, 2007 1:39:30 PM
Change profilesThe device creates a voice tag for each profile. To set ona profile using a voice command, press and hold thevoice key, and say the name of the profile.To change the voice command, select Profiles >Options > Change command.Voice command settingsTo switch off the synthesizer that plays recognizedvoice commands in the selected device language, selectSettings > Synthesizer > Off.To reset voice recognition learning when the main userof the device has changed, select Remove voiceadapts..76Business voice applicationsfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 76 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 76 Jan 8, 2007 1:39:30 PM
Media applicationsSelect > Media.Media contains different media applications that allowyou to save and view images, record sounds, and playsound clips.RealPlayer Select > Media > RealPlayer.RealPlayer plays video clips and audio files that arestored in the device memory or on a memory card,transferred to your device from an e-mail message or acompatible computer, or streamed to your device overthe web. Supported formats include MPEG-4, MP4 (notstreaming), 3GP, RV, RA, AAC, AMR, and Midi. RealPlayerdoes not necessarily support all variations of a mediafile format.Play video clips and stream linksWarning: Do not hold the device near your earwhen the loudspeaker is in use, because the volumemay be extremely loud.To play a video clip or audio file, select Options >Open > Most recent clips to play one of the six videoclips you most recently played, or Saved clip to play avideo clip, or to open a web link. Select Play.To play streaming media, select a web link that pointsto a media clip, and select Play; or connect to the web,browse to a video clip or audio file, and select Play.RealPlayer recognizes two kinds of links: an rtsp:// URLand an http:// URL that points to a RAM file. Before thecontent begins streaming, your device must connect toa web site and buffer the content. If a networkconnection problem causes a playback error, RealPlayerattempts automatically to reconnect to the internetaccess point.To adjust the volume during playback, scroll right orleft.To fast-forward during playback, scroll up and hold. Torewind during play, scroll down and hold.To stop the playback or streaming, select Stop.Buffering or connecting to a streaming site stops, theplayback of a clip stops, and the clip rewinds to thebeginning.To download video clips from the web, select Options >Download videos.To view the video clip in full-screen size, selectOptions > Play in full screen. Full screen increases thesize of the video to cover the maximum video areapossible while the aspect ratio is maintained.77Media applicationsfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 77 Jan 8, 2007 1:39:30 PM
RealPlayer settingsYou may receive RealPlayer settings in a message fromyour service provider.To define the settings manually, select Options >Settings > Video or Streaming.Music player Warning: Do not hold the device near your earwhen the loudspeaker is in use, because the volumemay be extremely loud.Select > Media > Music player.With Music player, you can play music files, and createand listen to track lists. Music player supports files withextensions such as MP3 and AAC.Listen to musicWarning: Listen to music at a moderate level.Continuous exposure to high volume may damage yourhearing.To select a music track, select Options > Music library.All tracks lists all music on your device. To view sortedsongs, select Albums, Artists, Genres, or Composers.To play the track, select Options > Play. To pause theplaying, scroll to and press the scroll key.To select the previous or next track, scroll up or down.To control the music volume, scroll right or left. To mutethe volume, scroll left until the volume is muted.To stop a track, scroll to and press the scroll key.To play the music tracks repeatedly, select Options >Loop. Select All to repeat all the tracks in the currentfolder, One to repeat the selected track, or Off to set offthe repeating.To play music in random order, select a folder andOptions > Random play.After you have added or removed music files in thedevice, update your music library. Select Options >Update Music library. Music player searches the devicememory for music files and updates them to the musiclibrary.To view music track information, select Options > Viewdetails.Track listsYou can create a new track list and add tracks to it, oredit a saved track list.To create a new track list, select Options > Musiclibrary > Track lists > Options > New track list.To add a track to a track list, open the track list, andselect Options > Add tracks.EqualizerSelect > Media > Music player > Options >Equalizer.78Media applicationsfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 78 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 78 Jan 8, 2007 1:39:30 PM
With Equalizer, you can personalize the sound of yourmusic files. You can use preset frequency settings basedon styles of music. You can also create customizedsettings based on your own listening preferences.You cannot use the other functions of Music playerwhile Equalizer is open.To use a preset frequency setting when playing music,select the frequency setting you want to use, and selectOptions > Activate.To modify the frequency of a preset setting, selectOptions > Edit, select a frequency band, and scroll upor down to increase or decrease its value. You hear yourfrequency adjustment immediately in the playback.To reset the frequency bands to their original values,select Options > Reset to defaults.To create your own frequency setting, select Options >New preset. Enter a name for the frequency setting.Scroll up or down to move between the frequencybands and set the frequency on each band.Flash player Select > Media > Flash Player.With Flash player, you can view, play, and interact withflash files made for mobile devices.To play a flash file, scroll to it, and press the scroll key.To send a flash file to compatible devices, selectOptions > Send. Copyright protection may prevent thesending of some flash files.To switch between flash files saved on your devicememory or memory card, open the corresponding tabs.To change the flash file quality, select Options >Quality when you are playing the flash file. If you selectHigh, the playback of some flash files may appearuneven and slow due to their original settings. Changethe quality setting of such files to Normal or Low forimproved playback.Camera Select > Media > Camera.You can capture images or record video clips with thebuilt-in camera. The camera produces images in .jpegformat and video clips in .mp4 or .3gpp format.Capture an imageYour device supports an image capture resolution of upto 2048 x 1536 pixels.To capture an image, use the display as a viewfinder,aim at your subject, and press the capture key half waydown. The camera focuses on the subject. Then pressthe capture key all the way down. The device saves theimage in Gallery.Tip: To zoom in or out before capturing animage, scroll left or right.79Media applicationsfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 79 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 79 Jan 8, 2007 1:39:30 PM
Camera toolbarThe toolbar provides you with shortcuts to differentactions and settings before and after capturing animage or recording a video. Scroll to the desired action,and press the scroll key.To show the toolbar before and after capturing animage or recording a video, select Options > Showicons.To hide the toolbar, select Options > Hide icons. Toshow the toolbar again, press the scroll key.The available actions are: Switch between the video and image modes. Select the scene. A scene helps you to find the rightcolor and lighting settings for the current environment. Use the flash (images only). Activate the self-timer (images only). Activate the sequence mode (images only). Select a color effect. Adjust the white balance. Adjust the exposure compensation (images only). Adjust the light sensitivity (images only).The available options vary depending on the capturemode and view you are in.After capturing an imageTo delete the captured image, select Delete from thetoolbar. Select Back to return to the viewfinder tocapture another image.To print the image, select Print from the toolbar.To set the image as the background image in the activestandby, select Options > Set as wallpaper.To assign the image for a contact, select Set as contactcall image.To view and modify images, select > Media >Gallery > Images.Record a video clipSelect Video mode from the toolbar. To start recordinga video clip, press the capture key. To pause therecording, select Pause; to resume the recording, selectContinue. To stop the recording, select Stop. The devicesaves the clip in Gallery.After recording a video clipTo play the video clip you just recorded, select Play fromthe toolbar.To delete the video clip, select Delete from the toolbar.To record a new video clip, select New video from thetoolbar.80Media applicationsfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 80 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 80 Jan 8, 2007 1:39:30 PM
Gallery Select > Media > Gallery.Use Gallery to access and use different types of media,including images, videos, music, and sounds. All viewedimages and videos and all received music and soundsare automatically saved to Gallery. You can browse,open, and create folders and mark, copy, and moveitems to folders. Sound clips are opened in the Musicplayer, and video clips and streaming links in theRealPlayer application. Images are opened in the imageviewer.To open a file or a folder, scroll to it, and press the scrollkey.To create a new folder, select Options > Organize >New folder.To copy or move files, select a file and Options >Organize > Move to folder, New folder, Move tomemory card, Copy to memory card, Copy to phonemem., or Move to phone mem..To download files into Gallery using the browser, selectDownl. graphics, Downld. videos, Downld. tracks, orDownld. sounds. The browser opens, and you canchoose a bookmark or enter the address for thedownload site.To search for a file, select Options > Find. Write the itemyou are searching for. Files that match the search areshown.ImagesSelect > Media > Gallery > Images.Images consists of two views:•In the image browser view you can organize, delete,and rename images stored in your device or mem orycard. You can also set images as wallpaper for yourdisplay, or add them to contacts.•In the image viewer, which opens when you selectan image in the image browser view, you can viewand send individual images.The following file formats are supported: JPEG, BMP,PNG, and GIF 87a/89a. The device does not necessarilysupport all variations of the file formats.To open an image for viewing, select Options > Open.To open the next or previous image for viewing, scrollright or left.To enlarge the image on the display, select Options >Zoom in. To reduce the image on the display, selectZoom out.To view the image in full screen size, select Options >Full screen. To return to normal view, select Options >Normal screen.To rotate the image, select Options > Rotate. SelectRight to rotate the image clockwise by 90 degrees, orselect Left to rotate the image counterclockwise by 90degrees.81Media applicationsfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 81 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 81 Jan 8, 2007 1:39:30 PM
Manage image filesTo view detailed information about the image, selectOptions > View details.To send the image, select Options > Send, and themethod for sending.To rename the image, select Options > Rename.To set the image as wallpaper, select Options > Useimage as > Set as wallpaper.To add the image to a contact, select Options > Add tocontact. The Contacts application opens, and you canselect the contact for the image.Radio Select > Media > Radio.With the radio, you can search for radio channels, listento them, and save them on your device. You can leavethe radio open in the background while using thedevice for other purposes. The wired headset works asan antenna, so always connect the headset when usingthe radio, even if you listen to it through theloudspeaker. When you make or receive a phone call,the radio stops playing, and resumes when you end thecall. You cannot listen to the radio when the device isin the Offline profile.To tune channels automatically, select the or button.To tune channels manually, select Options > Manualtuning, and enter the frequency.To save the found channel, select Options > Savestation. Select the position for the channel in the list.The position corresponds to the number keys on thekeypad. A short press of a number key opens the radiochannel saved in that position. If you have a channelsaved to position 10 or higher, first press 1 and then thesecond digit.To listen to the next available channel, select the button. To listen to the previous channel, select thebutton. You can also go from channel to channel bypressing the answer button in your headset.To adjust the volume, scroll left or right.To switch from headset use to loudspeaker, selectOptions > Activate loudspeaker. To switch back toheadset use, select Options > Deactivate loudspeaker.To set the radio to play in the background while you areusing your device for other purposes, select Options >Play in background.To switch the radio off, select Exit.82Media applicationsfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 82 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 82 Jan 8, 2007 1:39:30 PM
Settings Select > Tools > Settings.You can define and modify various settings of yourdevice. Modifying these settings affects the operationof your device across several applications.Some settings may be preset for the device or sent toyou in a special message by your service provider. Youmay not be able to change such settings.Select the setting you want to edit to do the following:•Switch between two values, such as on or off.•Select a value from a list.•Open a text editor to enter a value.•Open a slider to decrease or increase the value byscrolling left or right.General settingsSelect > Tools > Settings > General.Select from the following:•Personalization — Change the display settings andpersonalize the device.•Date and time — Change the date and time.•Enhancement — Define the settings for yourenhancements.•Security — Define the security settings.•Factory settings — Restore the original settings ofthe device.Personalization settingsSelect > Tools > Settings > General >Personalization.Display settingsTo define the level of light that the device needs beforeswitching on the backlight, select Display > Lightsensor.To change the text size, select Display > Font size.To adjust the length of time the display can be left idlebefore the screen saver is activated, select Display >Power saver time-out.To select a welcome note or logo for the display, selectDisplay > Welcome note / logo. You can either choosethe default welcome note, enter your own text, or selectan image.To set how quickly the display dims after the lastkeypress, select Display > Light time-out.To set the active application to continue on the coverdisplay when you close the communicator, selectDisplay > {No display_text mapping for'qtn_set_display_cover_to_desk.gsdisplplugindelta',locale='en'} > {No display_text mapping for'qtn_set_display_desk_off.gsdisplplugindelta',locale='en'}.83Settings file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 83 Jan 8, 2007 1:39:30 PM
Standby mode settingsTo select whether to use the active standby, selectStandby mode > Active standby.To assign shortcuts for the scroll key and selection keys,select Standby mode > Shortcuts. These shortcuts arenot available in the active standby.To assign shortcuts to applications, select Standbymode > Standby apps.To specify the settings for the news ticker, selectStandby mode > News ticker.To select whether to show or hide the operator logo,select Operator logo > On or Off.Tone settingsTo select a ringing tone for voice or video calls, selectTones > Ringing tone or Video call tone.To set the ringing type, select Tones > Ringing type.You can also set the device to sound a ringing tone thatis a combination of the spoken name of the caller andthe selected ringing tone, when someone from yourcontacts list calls you. Select Tones > Say caller'sname.To set the volume level of the ringing tone, selectTones > Ringing volume.To set the various alert tones, select Tones > Messagealert tone, E-mail alert tone, Calendar alarm tone, orClock alarm tone.To set the device to vibrate when you receive a call,select Tones > Vibrating alert.To set the volume level of the device keypad tones,select Tones > Keypad tones.To set the warning tones on or off, select Tones >Warning tones.Language settingsTo set the language used on the device display, selectLanguage > Phone language.To select the language in which you write notes andmessages, select Language > Writing language.To select whether to use the predictive text input, selectLanguage > Predictive text. To reset the predictive textdictionary to its original state, select Language > Resetpredictiv. dict..To set how quickly the cursor moves to the nextcharacter when you write text, select Language >Keypress time-out. If you select None, you must movethe cursor manually with the scroll key.Date and time settingsSelect > Tools > Settings > General > Date andtime.Select from the following:•Time — Enter the time.•Time zone — Enter the time zone.•Date — Enter the date.•Date format — Change how the date is displayed.•Date separator — Change the symbol that separatesdays, months, and years.84Settings file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 84 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 84 Jan 8, 2007 1:39:30 PM
•Time format — Select the 12-hour or 24-hour clocksystem.•Time separator — Select the symbol that separateshours and minutes.•Clock type — Select Analog or Digital.•Clock alarm tone — Select the tone that you want touse for the alarm clock.•Network operator time — Select Auto-update toupdate the time, date, and time zone informationautomatically (network service). This service maynot be available in all networks.Enhancement settingsSelect > Tools > Settings > General >Enhancement.With most enhancements, you can do the following:To determine which profile is activated when youattach an enhancement to your device, select Defaultprofile.To let the device answer phone calls automatically after5 seconds when an enhancement is attached, selectAutomatic answer > On. If the ringing type is set toBeep once or Silent in the selected profile, theautomatic answer is disabled.To illuminate the device while it is attached to anenhancement, select Lights > On.Device securitySelect > Tools > Settings > General > Security.Define the following security settings:•Phone and SIM card — Adjust the security settingsfor your device and SIM card.•Certificate management — Manage your securitycertificates.•Track protected object — Manage your transactionsecurity.•Security module — Manage your security module.Avoid using codes that are similar to emergencynumbers to prevent accidental dialing of theemergency number. Codes are shown as asterisks.When you change a code, enter the current code, thenthe new code twice.Restore original settingsTo restore the original device settings, select Factorysettings. To do this, you need your device lock code.After resetting, the device may take a longer time topower on. Documents, contact information, calendarentries, and files are unaffected.Telephone settingsSelect > Tools > Settings > Phone.Select from the following:•Call — Define general call settings.•Call forwarding — Define your call forward settings.See "Call forward settings" on page 25.•Call restriction — Define your call restriction settings.See "Call restriction" on page 26.•Network — Adjust the network settings.85Settings file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 85 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 85 Jan 8, 2007 1:39:30 PM
Call settingsTo display your phone number to the person you arecalling, select Call > Send my caller ID > Yes. To let thenetwork determine whether your caller ID is sent, selectSet by network.To display your net call address to the person you arecalling using a net call, select Call > Send my internetcall ID > Yes.To be notified of a new incoming call while you have acall in progress, select Call > Call waiting > Options >Activate. To check if the function is active on thenetwork, select Options > Check status.To select whether net calls alert or not, select Call >Internet call alert. You are notified of missed net callswith a notification.To set the default call type, select Call > Default calltype and select Voice call if you make a GSM calls, orInternet call if you make net calls.To send a text message automatically to the personwho is calling you informing why you cannot answerthe incoming call, select Call > Reject call with SMS >Yes. To set the text for the message, select Call >Message text.Network settingsSelect > Tools > Settings > Phone > Network.To select the network mode, select Network mode andDual mode, UMTS, or GSM. In the dual mode, the deviceswitches automatically between networks.To select the operator, select Operator selection andManual to choose from available networks, orAutomatic to have the device select the networkautomatically.To set the device to indicate when it is used in MicroCellular Network (MCN), select Cell info display > On.Connection settingsSelect > Tools > Settings > Connection.Select from the following:•Access points — Set up new or edit existing accesspoints. Some or all access points may be preset foryour device by your service provider, and you maynot be able to create, edit, or remove them.•Packet data — Determine when packet dataconnections are used, and enter the access point ifyou use your device as a modem for a computer.•Wireless LAN — Determine if the device displays anindicator when a WLAN is available, and how oftenthe device searches for networks.•Data call — Set the time-out period after which datacall connections automatically end.•SIP settings — View or create session initiationprotocol (SIP) profiles.•Internet tel. — Define settings for net calls.•VPN — Install and manage VPN policies, manage VPNpolicy servers, see the VPN log, and create andmanage VPN access points.•Configurations — View and delete trusted serversfrom which your device may receive configurationsettings.86Settings file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 86 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 86 Jan 8, 2007 1:39:30 PM
To obtain information about WLAN or subscribing to apacket data service and the appropriate connection andconfiguration settings, contact your service provider.The settings available for editing may vary.Access pointsSelect > Tools > Settings > Connection > Accesspoints.An access point is where your device connects to thenetwork by way of a data connection. To use e-mail andmultimedia services or to browse web pages, you mustfirst define access points for these services.Some or all access points may be preset for your deviceby your service provider, and you may not be able tocreate, edit, or remove them.To create a new access point, select Options > Newaccess point. Select Use default settings to enter thenecessary changes to the default access point settings,or select Use existing settings to use an existing accesspoint as the basis for the new access point.Packet data settingsSelect > Tools > Settings > Connection > Packetdata.Your device supports packet data connections, such asGPRS in the GSM network. When you are using yourdevice in GSM and UMTS networks, it is possible to havemultiple data connections active at the same time;access points can share a data connection, and dataconnections remain active, for example, during voicecalls. See "Connection manager " on page 56.To define the packet data settings, select Packet dataconnection and select When available to register thedevice to the packet data network when you switch thedevice on in a supported network, or When needed toestablish a packet data connection only when anapplication or action requires it. Select Access point andenter the access point name provided by your serviceprovider to use the device as a packet data modem toyour computer.These settings affect all access points for packet dataconnections.WLAN settingsSelect > Tools > Settings > Connection > WirelessLAN.To have an indicator displayed when there is a WLANavailable in your current location, select Show WLANavailability > Yes.To select the interval for your device to scan foravailable WLANs and update the indicator, select Scanfor networks. This setting is not visible unless you selectShow WLAN availability > Yes.To check the unique media access control (MAC) addressthat identifies your device, enter *#62209526# in thestandby mode. The MAC address is shown on the devicedisplay.87Settings file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 87 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 87 Jan 8, 2007 1:39:30 PM
WLAN security settingsSelect Access points > Options > New access point, orselect an access point and Options > Edit.In the access point settings, select WLAN securitymode > WEP.The wired equivalent privacy (WEP) encryption methodencrypts data before it is transmitted. Access to thenetwork is denied to users who do not have therequired WEP keys. When the WEP security mode is inuse, and your device receives a data packet notencrypted with the WEP keys, the data is discarded.In an Ad-hoc network, all devices must use the sameWEP key.Select WLAN security settings and from the following:•WEP key in use — Select the desired WEP key.•Authentication type — Select Open or Shared.•WEP key settings — Edit the settings for the WEP key.EAPSelect > Tools > Settings > Connection > Accesspoints.The EAP (extensible authentication protocol) plug-insare used in wireless networks to authenticate wirelessdevices and authentication servers, and the differentEAP plug-ins make possible the use of various EAPmethods (network service).You can view the EAP plug-ins currently installed in yourdevice (network service).1. To define the EAP plug-in settings, select Options >New access point and define an access point thatuses WLAN as a data bearer.2. Select 802.1x or WPA/WPA2 as the security mode.3. Select WLAN security settings > WPA/WPA2 >EAP > EAP plug-in settings.To use an EAP plug-in when you connect to a WLANusing the access point, select the desired plug-in andOptions > Enable. The EAP plug-ins enabled for usewith this access point have a check mark next to them.To not use a plug-in, select Options > Disable.To edit the EAP plug-in settings, select Options > Edit.To change the priority of the EAP plug-in settings, selectOptions > Raise priority to attempt to use the plug-inbefore other plug-ins when connecting to the networkwith the access point, or Options > Lower priority touse this plug-in for network authentication afterattempting to use other plug-ins.See the device help for more information on EAPplugins.Data call settingsSelect > Tools > Settings > Connection > Datacall.To set the time-out period after which data callsautomatically end if no data has been transferred,select Online time. Select User defined to enter the timeyourself or Unlimited to keep the connection activeuntil you select Options > Disconnect.88Settings file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 88 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 88 Jan 8, 2007 1:39:30 PM
Session initiation protocol (SIP)settingsSelect > Tools > Settings > Connection > SIPsettings.Session initiation protocols (SIP) are used for creating,modifying, and terminating certain types ofcommunication sessions with one or more participants(network service). SIP profiles include settings for thesesessions. The SIP profile used by default for acommunication session is underlined.To create a SIP profile, select Options > Add new >Use default profile or Use existing profile.To select the SIP profile you want to use by default forcommunication sessions, select Options > Defaultprofile.Net call settingsSelect > Tools > Settings > Connection > Internettel..To create a new net call profile, select Options > Newprofile.To edit an existing profile, select Options > Edit.VPN access pointsSelect > Tools > Settings > Connection > VPN >VPN access points.To create a new VPN access point, select Options > Newaccess point.To edit a VPN access point, select Options > Edit.ConfigurationsSelect > Tools > Settings > Connection >Configurations.You can receive messages from your service provider orcompany information management containingconfiguration settings for trusted servers. Thesesettings are automatically saved in Configurations. Youmay receive configuration settings for access points,multimedia, or e-mail services, and IM orsynchronization settings from trusted servers.To delete configurations for a trusted server, selectOptions > Delete. The configuration settings for otherapplications provided by this server are also deleted.Application settingsSelect > Tools > Settings > Applications.Select an application from the list.89Settings file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 89 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 89 Jan 8, 2007 1:39:30 PM
Device and data managementBack up dataIt is recommended to back up device memory regularlyto the memory card or a compatible computer.To back up information from the device memory to amemory card, select > Tools > Memory >Options > Back up phone memory.To restore information from the memory card to thedevice memory, select > Tools > Memory >Options > Restore from card.You can also connect your device to a compatiblecomputer and use Nokia PC Suite to back up data.Remote configuration Select > Tools > Device mgr..With Device manager, you can manage data andsoftware on your device.You can connect to a server, and receive configurationsettings for your device. You may receive server profilesand different configuration settings from your serviceproviders or company information managementdepartment. Configuration settings may includeconnection and other settings used by differentapplications in your device. Available options may vary.The remote configuration connection is usually startedby the server when the device settings need to beupdated.To create a new server profile, select Options > Newserver profile.To connect to the server and receive configurationsettings for your device, select Options > Startconfiguration.To view the configuration log of the selected profile,select Options > View log.Application manager Select > Installat. > App. mgr..With Application manager, you can see the softwarepackages that have been installed, with their name,version number, type, and size. You can view the detailsof installed applications, remove them from yourdevice, and specify installation settings.Important: Only install and use applications andother software from trusted sources, such asapplications that are Symbian Signed or have passedthe Java Verified™ testing.90Device and data managementfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 90 Jan 8, 2007 1:39:30 PM
Activation keys Select > Tools > Actv. keys.Some media files, such as images, music, or video clips,are protected by digital usage rights. The activationkeys for such files may allow or restrict their usage. Forexample, with some activation keys you may listen toa music track only a limited number of times. Duringone playback session you may rewind, fast-forward, orpause the track, but once you stop it, you have used oneof the instances allowed.To view your activation keys by type, select Valid keys,Invalid keys, or Not in use.To view the key details, select Options > Key details.To activate a key, go to the main view of the activationkeys, and select Invalid keys > Options > Getactivation key. Establish a network connection at theprompt, and you are directed to a web site where youcan purchase rights to the media.To remove file rights, open the valid keys tab or the keysnot in use tab, scroll to the desired file, and selectOptions > Delete. If there are several rights related tothe same media file, all the rights are deleted.The group key view displays all of the files related to agroup right. If you have downloaded multiple mediafiles with the same rights, they are all displayed in thisview. You can open the group view from either the validkeys or invalid keys tabs. To access these files, open thegroup rights folder.To rename a group, select Options > Rename. Enter thenew name to change the name of the group rights.Data synchronization Select > Tools > Sync.With Sync, you can synchronize your contacts, calendarentries, notes, or mailboxes with correspondingapplications on a compatible computer or remoteinternet server. Your synchronization settings are savedin a synchronization profile. The Sync application usesSyncML technology for remote synchronization. Forinformation on SyncML compatibility, contact thesupplier of the applications with which you want tosynchronize your device.You may receive the synchronization settings as amessage from your service provider. The availableapplications you can synchronize may vary. Contactyour service provider for more information.Create a synchronization profileTo create a profile, select Options > New sync profileand assign a name for the profile, select theapplications to synchronize with the profile, and specifythe needed connection settings. Contact your serviceprovider for details.Select applications to synchronize1. To select the applications to synchronize with asynchronization profile, select Options > Edit syncprofile > Applications.2. Select the desired application, and select Include insync > Yes.91Device and data managementfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 91 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 91 Jan 8, 2007 1:39:30 PM
3. Specify the Remote database and Synchronizationtype settings.Barcode reader Select > Tools > Barcode.Use the Barcode application to decode different typesof codes, such as barcodes and codes in magazines. Thecodes may contain information such as web addresses,e-mail addresses, and phone numbers. These areindicated by icons on the top of the display in thedirection they appear in the decoded information.The Barcode application uses the camera in your deviceto scan codes.To scan the code with the camera, select Scan code. Setthe code between the red lines on the display. Thedecoded information appears on the display.To save the scanned data, select Options > Save. Thedata is saved in .bcr format.To view previously saved, decoded information, selectSaved data. To open a code, press the scroll key.The device reverts to the standby mode to save batterypower if no keys are pressed for 1 minute. To continuescanning or viewing saved information, press the scrollkey.Download! Select > #Download!.With Download! (network service), you can browse,download, and install items, such as latest applicationsand related documents, to your device from the web.The items are categorized under catalogs and foldersprovided by Nokia or independent service providers.Some items may be chargeable, but you can usuallypreview them free of charge.Only install and use applications and other softwarefrom sources that offer adequate security andprotection against harmful software.92Device and data managementfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 92 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 92 Jan 8, 2007 1:39:30 PM
SecurityFixed dialingSelect > Contacts > Options > SIM contacts >Fixed dial contacts.With the fixed dialing service, you can restrict calls fromyour device to certain phone numbers. Not all SIM cardssupport the fixed dialing service. Contact your serviceprovider for more information.When fixed dialing is activated, calls may be possible tothe official emergency number programmed into yourdevice.1. To restrict calls from your device, select Options >New SIM contact and enter the contact name andphone number to the list of numbers to which callsare allowed, or select Add from Contacts to copy thecontact from Contacts. To restrict calls by a countryprefix, enter the country prefix in the list ofnumbers. All phone numbers to which calls areallowed must start with this country prefix.2. Select Options > Activate fixed dialing. You needyour PIN2 code to activate and deactivate fixeddialing or edit your fixed dialing contacts. Contactyour service provider if you do not have the code.To cancel the service, select Options > Deactivatefixed dialing.Tip: To send text messages to the SIM contactswhile the fixed dialing service is active, youneed to add the text message center numberto the fixed dialing list.Certificate managerImportant: Even if the use of certificates makesthe risks involved in remote connections and softwareinstallation considerably smaller, they must be usedcorrectly in order to benefit from increased security. Theexistence of a certificate does not offer any protectionby itself; the certificate manager must contain correct,authentic, or trusted certificates for increased securityto be available. Certificates have a restricted lifetime. If"Expired certificate" or "Certificate not valid yet" isshown even if the certificate should be valid, check thatthe current date and time in your device are correct.Before changing any certificate settings, you mustmake sure that you really trust the owner of thecertificate and that the certificate really belongs to thelisted owner.Select > Tools > Settings > General > Security >Certificate management.Digital certificates are used to verify the origins ofsoftware but do not guarantee safety. There are threedifferent types of certificates: authority certificates,personal certificates, and server certificates. During asecure connection, a server may send a server93Securityfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 93 Jan 8, 2007 1:39:30 PM
certificate to your device. Upon receipt, it is checkedthrough an authority certificate stored on your device.You receive notification if the identity of the server isnot authentic or if you do not have the correctcertificate in your device.Download a certificate from a web site, or receive acertificate as an e-mail attachment, or as a messagesent through a Bluetooth or infrared connection.Certificates should be used when you connect to anonline bank or a remote server to transfer confidentialinformation. They should also be used if you want toreduce the risk of viruses or other malicious software,and to check the authenticity of software when youdownload and install software to your device.Tip: When you add a new certificate, check itsauthenticity.Security modulesSelect > Tools > Settings > General > Security >Security module.To view or edit a security module, scroll to it, and pressthe scroll key.To view detailed information about a security module,select Options > Security details.The key store contains the contents of the securitymodule. To delete the key store, select Key store, selectthe desired key store, and Options > Delete. You maynot be able to delete the key store of all securitymodules.Memory card securitySelect > Tools > Memory.You can protect a memory card with a password toprevent unauthorized access. To set a password, selectOptions > Set password. The password can be up toeight characters long and is case-sensitive. Thepassword is stored in your device. You do not need toenter it again while you use the memory card on thesame device. If you use the memory card on anotherdevice, you are asked for the password. Not all memorycards support password protection.To remove the memory card password, select Options >Remove password. When you remove the password,the data on the memory card is not protected againstunauthorized use.To open a locked memory card, select Options > Unlockmemory card. Enter the password.If you cannot recall the password to unlock a lockedmemory card, you may reformat the card, in which casethe card is unlocked and password removed.Formatting a memory card destroys all data stored onthe card.Lock the deviceWhen the device is locked, calls may be possible to theofficial emergency number programmed into yourdevice.To prevent access to the contents of your device, lockthe device in the standby mode. Press the power key,94Securityfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 94 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 94 Jan 8, 2007 1:39:30 PM
select Lock phone, and enter your lock code. The defaultlock code is 12345. To unlock, press the left selectionkey, enter your lock code, and press the scroll key.You can also lock the device remotely by sending a textmessage to the device. To enable remote locking andto define the text for the message, select > Tools >Settings > General > Security > Phone and SIMcard > {No display_text mapping for'qtn_set_remotelock_status.remotelockui',locale='en'} > {No display_text mapping for'qtn_set_remotelock_on.remotelockui', locale='en'}.Enter the remote lock message and confirm themessage. The message must be at least 5 characterslong.To change the lock code, select > Tools >Settings > General > Security > Phone and SIMcard > Lock code. Enter the old code and then the newcode twice. The new code can be 4-255 characters long.Both alphabets and digits can be used, and bothuppercase and lowercase alphabets are possible.95Securityfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 95 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 95 Jan 8, 2007 1:39:30 PM
ShortcutsHere are some of the available keyboard shortcuts inyour device. Shortcuts can make the use of theapplications more efficient.General shortcutsPower key Press and hold to switch your deviceon and off.Press once to switch betweenprofiles.Menu key Press once to open the main menufor access to all applications.Press and hold to bring up a list ofopen applications. To navigatebetween the open applications,select an application. To close openapplications, select an application,and press the backspace key .Active standby modeLeft selectionkey + *Lock and unlock the keypad.Call key Open the call log.0Press and hold to open your homepage in the Web browser.#Press and hold to switch betweenthe Silent and Normal profiles.1Press and hold to call your voicemailbox.Number key (2–9)Call a phone number using speeddialing. You must first activatespeed dialing at > Tools >Settings > Phone > Call > 1-touchdialing > On.Web*Zoom in the page.#Zoom out the page.2Open the search dialog.5View the active pages.8View the page overview.9Open the dialog for entering a newweb address.0Open the Bookmarks folder.Image viewerCall key Send the image.0Zoom out.5Zoom in.96Shortcutsfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 96 Jan 8, 2007 1:39:30 PM
7Zoom in. Press twice for the fullscreen size.4Scroll left in the zoomed image.6Scroll right in the zoomed image.2Scroll up in the zoomed image.8Scroll down in the zoomed image.3Rotate clockwise.1Rotate counterclockwise.*Switch between the full screen sizeand normal view.Editing shortcutsChr key Press once to view a table of specialcharacters not found on the keypad.Chr + tab Switch between open applications.Ctrl+A Select all.Ctrl+C Copy.Ctrl+V Paste.Ctrl+X Cut.Ctrl+Z Undo.Ctrl + scroll right Move the focus one word forward.Ctrl + scroll left Move the focus one word backward.Chr + scroll right Move to the end of the line.Chr + scroll left Move to the start of the line.Chr + scroll up Page up.Chr + scrolldownPage down.Ctrl + chr + scrollupMove to the start of the document.Ctrl + chr + scrolldownMove to the end of the document.Shift + scrollrightSelect the next character on theright.Shift + scroll left Select the next character on the left.Ctrl + shift +scroll rightSelect the next word on the right.Ctrl + shift +scroll leftSelect the next word on the left.Shift +backspaceDelete text from the right.Chr + alphabet Insert an accented character.Ctrl + chr Change the writing language.Shift + scroll up Select all the text on top and/or leftside of the cursor.Shift + scrolldownSelect all the text below and/or rightside of the cursor.97Shortcutsfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 97 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 97 Jan 8, 2007 1:39:30 PM
Glossary3G 3rd generation mobilecommunications. A digital system formobile communications which aims atglobal use and provides increasedbandwidth. 3G lets a mobile device useraccess a wide variety of services, such asmultimedia.Ad-hocoperatingmodeIn a wireless LAN, the ad hoc operatingmode allows you to send and receivedata from other devices withcompatible wireless LAN support. Thesefunctions may require an additionalthird party application to work. Nowireless LAN access point is required.Simply make the necessaryconfigurations and startcommunicating. Ad hoc networking iseasy to set up, but communication islimited to devices that are within rangeand support compatible wireless LANtechnology.Cookies Cookies are little pieces of information,given by the server to you, to storeinformation about your visits to a website. When you accept cookies, theserver is able to evaluate your use of theweb site, what you are interested in,what you want to read, and so on.DNS Domain name service. An internetservice that translates domain namessuch as www.nokia.com into IPaddresses such as 192.100.124.195.Domain names are easier to rememberbut this translation is needed becausethe internet is based on IP addresses.DTMF tones Dual Tone Multi-Frequency tones. TheDTMF system is used by touch-tonetelephones. DTMF assigns a specificfrequency, or tone, to each key so that itcan easily be identified by amicroprocessor. DTMF tones allow youto communicate with voice mailboxes,computerized telephony systems, andso on.EAP Extensible authentication protocol. EAPplug-ins are used in wireless networksto authenticate wireless devices andauthentication servers.EGPRS Enhanced GPRS. EGPRS is similar to GPRS,but it enables faster connection. Formore information on the availability ofEGPRS and data transfer speed, contactyour service provider.98Glossaryfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 98 Jan 8, 2007 1:39:30 PM
GPRS General packet radio service. GPRSenables wireless access for mobilephones to data networks (networkservice). GPRS uses packet datatechnology where information is sent inshort bursts of data over the mobilenetwork. The benefit of sending data inpackets is that the network is occupiedonly when sending or receiving data. AsGPRS uses the network efficiently, itallows for quick data connection setupand fast data transmission speeds.You must subscribe to the GPRS service.For availability and subscription toGPRS, contact your service provider.During a voice call, you cannot establisha GPRS connection, and any existingGPRS connection is put on hold unlessthe network supports dual transfermode.GPS Global positioning system. GPS is aworldwide radio navigation system.HSDPA High-speed downlink packet access.HSDPA brings high-speed data deliveryto 3G terminals, ensuring that usersrequiring effective multimediacapabilities benefit from data ratespreviously unavailable because oflimitations in the radio access network.HTTP Hypertext transfer protocol. A documenttransfer protocol used in the web.HTTPS HTTP over a secure connection.IMAP4 Internet mail access protocol, version 4.A protocol used for accessing yourremote mailbox.Internetaccess pointAn access point is where your deviceconnects to a network. To use e-mailand multimedia services or to connectto the internet and browse web pages,you must first define internet accesspoints for these services.Infrastructure operatingmodeThe infrastructure operating modeallows two kinds of communication:wireless devices communicate witheach other through a wireless LANaccess point or wireless devicescommunicate with a wired LAN devicethrough a wireless LAN access point. Theadvantage of the infrastructureoperating mode is that you can havemore control over network connectionsbecause they pass through an accesspoint. A wireless device can access theservices that are available in a regularwired LAN: company database, e-mail,the Internet, and other networkresources, for example.99Glossaryfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 99 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 99 Jan 8, 2007 1:39:30 PM
PIN Personal identity number. The PIN codeprotects your device from unauthorizeduse. The PIN code is supplied with theSIM card. If the PIN code request isselected, the code is required each timethe device is switched on. The PIN codemust be 4 to 8 digits long.PIN2 The PIN2 code is supplied with some SIMcards. The PIN2 code is required toaccess certain functions supported bythe SIM card. The length of the PIN2 codeis 4 to 8 digits.POP3 Post office protocol, version 3. Acommon mail protocol that can be usedfor accessing your remote mailbox.SIP Session initiation protocol. SIP is usedfor creating, modifying, andterminating certain types ofcommunication sessions with one ormore participants.SSID Service set identifier. SSID is the namethat identifies the specific wireless LAN.Streaming Streaming audio and video files meansplaying them directly from the webwithout downloading them first to yourdevice.UMTS Universal mobile telecommunicationssystem. UMTS is a 3G mobilecommunication system. Besides voiceand data, UMTS enables audio and videodelivery to wireless devices.When you use your device in GSM andUMTS networks, multiple dataconnections can be active at the sametime, and access points can share a dataconnection. In the UMTS network, dataconnections remain active during voicecalls. You can, for example, browse theweb faster than previously possiblewhile simultaneously speaking on thephone.UPIN PIN code used in UMTS network.USIM SIM card used in UMTS network.USSDcommandA service request, such as request toactivate an application or configurevarious settings remotely, that you cansend to your operator or serviceprovider with your device.VoIP Voice over internet protocol technology.VoIP is a set of protocols that facilitatephone calls over an IP network, such asthe internet.VPN Virtual private network. VPN creates asecure connection to compatiblecorporate intranet and services, such ase-mail.WAP Wireless application protocol. WAP is aninternational standard for wirelesscommunication.100Glossaryfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 100 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 100 Jan 8, 2007 1:39:30 PM
WEP Wired equivalent privacy. WEP is anencryption method that encrypts databefore it is transmitted.WLAN Wireless local area network. A wirelessLAN connection is established when youcreate a data connection using awireless LAN internet access point. Theactive wireless LAN connection is endedwhen you end the data connection.If you move the device to anotherlocation within the wireless LAN and outof range of a wireless LAN access point,the roaming functionality canautomatically connect your device toanother access point that belongs to thesame network. As long as you remainwithin range of access points thatbelong to the same network, yourdevice can stay connected to thenetwork.WPA2 Security method for WLAN.101Glossaryfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 101 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 101 Jan 8, 2007 1:39:30 PM
Battery informationYour device is powered by a rechargeable battery. Thebattery can be charged and discharged hundreds oftimes, but it will eventually wear out. When the talk andstandby times are noticeably shorter than normal,replace the battery. Use only Nokia approved batteries,and recharge your battery only with Nokia approvedchargers designated for this device.If a replacement battery is being used for the first timeor if the battery has not been used for a prolongedperiod, it may be necessary to connect the charger, thendisconnect and reconnect it to begin charging thebattery.Unplug the charger from the electrical plug and thedevice when not in use. Do not leave a fully chargedbattery connected to a charger, since overcharging mayshorten its lifetime. If left unused, a fully chargedbattery will lose its charge over time.If the battery is completely discharged, it may takeseveral minutes before the charging indicator appearson the display or before any calls can be made.Use the battery only for its intended purpose. Never useany charger or battery that is damaged.Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as acoin, clip, or pen causes direct connection of the positive(+) and negative (-) terminals of the battery. (These looklike metal strips on the battery.) This might happen, forexample, when you carry a spare battery in your pocketor purse. Short-circuiting the terminals may damagethe battery or the connecting object.Leaving the battery in hot or cold places, such as in aclosed car in summer or winter conditions, will reducethe capacity and lifetime of the battery. Always try tokeep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not worktemporarily, even when the battery is fully charged.Battery performance is particularly limited intemperatures well below freezing.Do not dispose of batteries in a fire as they may explode.Batteries may also explode if damaged. Dispose ofbatteries according to local regulations. Please recyclewhen possible. Do not dispose as household waste.Do not dismantle or shred cells or batteries. In the eventof a battery leak, do not allow the liquid to come incontact with the skin or eyes. In the event of such a leak,flush your skin or eyes immediately with water, or seekmedical help.102Battery informationfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 102 Jan 8, 2007 1:39:30 PM
Nokia battery authentication guidelinesAlways use original Nokia batteries for your safety. Tocheck that you are getting an original Nokia battery,purchase it from an authorized Nokia dealer, look forthe Nokia Original Enhancements logo on thepackaging, and inspect the hologram label using thefollowing steps:Successful completion of the four steps is not a totalassurance of the authenticity of the battery. If you haveany reason to believe that your battery is not anauthentic, original Nokia battery, you should refrainfrom using it, and take it to the nearest authorizedNokia service point or dealer for assistance. Yourauthorized Nokia service point or dealer will inspect thebattery for authenticity. If authenticity cannot beverified, return the battery to the place of purchase.Authenticate hologram1. When looking at the hologramon the label, you should see theNokia connecting handssymbol from one angle and theNokia Original Enhancementslogo when looking fromanother angle.2. When you angle the hologramleft, right, down, and up, youshould see 1, 2, 3, and 4 dotson each side respectively.3. Scratch the side of the label toreveal a 20-digit code, forexample,12345678919876543210.Turn the battery so that thenumbers are facing upwards.The 20-digit code readsstarting from the number atthe top row followed by thebottom row.4. Confirm that the 20-digit codeis valid by following theinstructions atwww.nokia.com/batterycheck.103Nokia battery authentication guidelinesfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 103 Jan 8, 2007 1:39:30 PM
What if your battery is notauthentic?If you cannot confirm that your Nokia battery with thehologram on the label is an authentic Nokia battery,please do not use the battery. Take it to the nearestauthorized Nokia service point or dealer for assistance.The use of a battery that is not approved by themanufacturer may be dangerous and may result in poorperformance and damage to your device and itsenhancements. It may also invalidate any approval orwarranty applying to the device.To find out more about original Nokia batteries, visitwww.nokia.com/battery.104Nokia battery authentication guidelinesfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 104 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 104 Jan 8, 2007 1:39:30 PM
Care and maintenanceYour device is a product of superior design andcraftsmanship and should be treated with care. Thefollowing suggestions will help you protect yourwarranty coverage.•Keep the device dry. Precipitation, humidity, and alltypes of liquids or moisture can contain mineralsthat will corrode electronic circuits. If your devicedoes get wet, remove the battery, and allow thedevice to dry completely before replacing it.•Do not use or store the device in dusty, dirty areas.Its moving parts and electronic components can bedamaged.•Do not store the device in hot areas. Hightemperatures can shorten the life of electronicdevices, damage batteries, and warp or melt certainplastics.•Do not store the device in cold areas. When thedevice returns to its normal temperature, moisturecan form inside the device and damage electroniccircuit boards.•Do not attempt to open the device other than asinstructed in this guide.•Do not drop, knock, or shake the device. Roughhandling can break internal circuit boards and finemechanics.•Do not use harsh chemicals, cleaning solvents, orstrong detergents to clean the device.•Do not paint the device. Paint can clog the movingparts and prevent proper operation.•Use a soft, clean, dry cloth to clean any lenses, suchas camera, proximity sensor, and light sensor lenses.•Use only the supplied or an approved replacementantenna. Unauthorized antennas, modifications, orattachments could damage the device and mayviolate regulations governing radio devices.•Use chargers indoors.•Always create a backup of data you want to keep,such as contacts and calendar notes.•To reset the device from time to time for optimumperformance, power off the device and remove thebattery.These suggestions apply equally to your device, battery,charger, or any enhancement. If any device is notworking properly, take it to the nearest authorizedservice facility for service.DisposalThe crossed-out wheeled-bin symbol on yourproduct, literature, or packaging reminds you thatin the European Union all electrical and electronicproducts, batteries, and accumulators must betaken to separate collection at the end of their workinglife. Do not dispose of these products as unsortedmunicipal waste.105Care and maintenancefile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 105 Jan 8, 2007 1:39:30 PM
Return the products to collection to prevent possibleharm to the environment or human health fromuncontrolled waste disposal and to promote thesustainable reuse of material resources. Collectioninformation is available from the product retailer, localwaste authorities, national producer responsibilityorganizations, or your local Nokia representative. Formore information, see product Eco-Declaration orcountry-specific information at /www.nokia.com.106Care and maintenancefile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 106 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 106 Jan 8, 2007 1:39:30 PM
Additional safety informationSmall childrenYour device and its enhancements may contain smallparts. Keep them out of the reach of small children.Operating environmentThis device meets RF exposure guidelines when usedeither in the normal use position against the ear orwhen positioned at least 1,5 centimeters (5/8 inches)away from the body. When a carry case, belt clip, orholder is used for body-worn operation, it should notcontain metal and should position the device theabove-stated distance from your body.To transmit data files or messages, this device requiresa quality connection to the network. In some cases,transmission of data files or messages may be delayeduntil such a connection is available. Ensure the aboveseparation distance instructions are followed until thetransmission is completed.Parts of the device are magnetic. Metallic materials maybe attracted to the device. Do not place credit cards orother magnetic storage media near the device, becauseinformation stored on them may be erased.Medical devicesOperation of any radio transmitting equipment,including wireless phones, may interfere with thefunctionality of inadequately protected medicaldevices. Consult a physician or the manufacturer of themedical device to determine if they are adequatelyshielded from external RF energy or if you have anyquestions. Switch off your device in health care facilitieswhen any regulations posted in these areas instruct youto do so. Hospitals or health care facilities may be usingequipment that could be sensitive to external RFenergy.Implanted medical devicesManufacturers of medical devices recommend that aminimum separation of 15.3 centimeters (6 inches)should be maintained between a wireless device andan implanted medical device, such as a pacemaker orimplanted cardioverter defibrillator, to avoid potentialinterference with the medical device. Persons who havesuch devices should:•Always keep the wireless device more than 15.3centimeters (6 inches) from the medical device whenthe wireless device is turned on.•Not carry the wireless device in a breast pocket.•Hold the wireless device to the ear opposite themedical device to minimize the potential forinterference.•Turn the wireless device off immediately if there isany reason to suspect that interference is takingplace.107Additional safety informationfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 107 Jan 8, 2007 1:39:30 PM
•Read and follow the directions from themanufacturer of their implanted medical device.If you have any questions about using your wirelessdevice with an implanted medical device, consult yourhealth care provider.Hearing aidsSome digital wireless devices may interfere with somehearing aids. If interference occurs, consult your serviceprovider.VehiclesRF signals may affect improperly installed orinadequately shielded electronic systems in motorvehicles such as electronic fuel injection systems,electronic antiskid (antilock) braking systems,electronic speed control systems, and air bag systems.For more information, check with the manufacturer, orits representative, of your vehicle or any equipmentthat has been added.Only qualified personnel should service the device orinstall the device in a vehicle. Faulty installation orservice may be dangerous and may invalidate anywarranty that may apply to the device. Check regularlythat all wireless device equipment in your vehicle ismounted and operating properly. Do not store or carryflammable liquids, gases, or explosive materials in thesame compartment as the device, its parts, orenhancements. For vehicles equipped with an air bag,remember that air bags inflate with great force. Do notplace objects, including installed or portable wirelessequipment in the area over the air bag or in the air bagdeployment area. If in-vehicle wireless equipment isimproperly installed and the air bag inflates, seriousinjury could result.Potentially explosiveenvironmentsSwitch off your device when in any area with apotentially explosive atmosphere, and obey all signsand instructions. Potentially explosive atmospheresinclude areas where you would normally be advised toturn off your vehicle engine. Sparks in such areas couldcause an explosion or fire resulting in bodily injury oreven death. Switch off the device at refueling pointssuch as near gas pumps at service stations. Observerestrictions on the use of radio equipment in fueldepots, storage, and distribution areas; chemicalplants; or where blasting operations are in progress.Areas with a potentially explosive atmosphere areoften, but not always, clearly marked. They includebelow deck on boats, chemical transfer or storagefacilities, vehicles using liquefied petroleum gas (suchas propane or butane), and areas where the air containschemicals or particles such as grain, dust, or metalpowders.Emergency callsImportant: Wireless phones, including thisdevice, operate using radio signals, wireless networks,landline networks, and user-programmed functions.108Additional safety informationfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 108 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 108 Jan 8, 2007 1:39:30 PM
Because of this, connections in all conditions cannot beguaranteed. You should never rely solely on anywireless device for essential communications likemedical emergencies.To make an emergency call:1. If the device is not on, switch it on. Check foradequate signal strength.Some networks may require that a valid SIM card isproperly inserted in the device.2. Press the end key as many times as needed to clearthe display and ready the device for calls.3. Enter the official emergency number for yourpresent location. Emergency numbers vary bylocation.4. Press the call key.If certain features are in use, you may first need to turnthose features off before you can make an emergencycall. If the device is in the offline or flight profile mode,you may need to change the profile to activate thephone function before you can make an emergency call.Consult this guide or your service provider for moreinformation.When making an emergency call, give all the necessaryinformation as accurately as possible. Your wirelessdevice may be the only means of communication at thescene of an accident. Do not end the call until givenpermission to do so.CERTIFICATIONINFORMATION (SAR)THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TORADIO WAVES.Your mobile device is a radio transmitter and receiver.It is designed not to exceed the limits for exposure toradio waves recommended by international guidelines.These guidelines were developed by the independentscientific organization ICNIRP and include safetymargins designed to assure the protection of allpersons, regardless of age and health.The exposure guidelines for mobile devices employ aunit of measurement known as the Specific AbsorptionRate or SAR. The SAR limit stated in the ICNIRPguidelines is 2.0 watts/kilogram (W/kg) averaged over10 grams of tissue. Tests for SAR are conducted usingstandard operating positions with the devicetransmitting at its highest certified power level in alltested frequency bands. The actual SAR level of anoperating device can be below the maximum valuebecause the device is designed to use only the powerrequired to reach the network. That amount changesdepending on a number of factors such as how closeyou are to a network base station. The highest SAR valueunder the ICNIRP guidelines for use of the device at theear is 0.65 W/kg.Use of device accessories and enhancements may resultin different SAR values. SAR values may vary dependingon national reporting and testing requirements and thenetwork band. Additional SAR information may beprovided under product information atwww.nokia.com.109Additional safety informationfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 109 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 109 Jan 8, 2007 1:39:30 PM
Your mobile device is also designed to meet therequirements for exposure to radio waves establishedby the Federal Communications Commission (USA) andIndustry Canada. These requirements set a SAR limit of1.6 W/kg averaged over one gram of tissue. The highestSAR value reported under this standard during productcertification for use at the ear is 0.59 W/kg and whenproperly worn on the body is 0.72 W/kg. Informationabout this device model can be found at www.fcc.gov/oet/fccid by searching the equipment authorizationsystem using FCC ID: PYARA-6.110Additional safety informationfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 110 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 110 Jan 8, 2007 1:39:30 PM
IndexSymbols/Numerics1-touch dialing 25Aaccess points 60creating 86, 87setting up 61VPN 89activation keys 91Active notes 51active standby 12active standby modeWLAN wizard 64alarm clock 47alert tones 84altitude calibration 71application manager 90application settings 89applicationscommon actions 12shortcuts 84attachmentse-mail 34audio files 77authority certificates 93automatic answer 85Bbacking up data 90Barcode reader 92Bluetoothauthorizing devices 58connections 56display indicators 59pairing 58passcode 58receiving data 57security 59sending data 57bookmarksadding 67browsing 66deleting 66browsingmaps 68offline 67web 66business cards 43deleting 43saving 43sending 43Ccable 55cacheemptying 67Calculator 49Calendar 45adding received entries 45changing the view 46creating entries 45deleting entries 45sending entries 45call forward settings 25caller ID 86calls1-touch dialing 25answering 21automatic answer 85call waiting 86caller ID 86conference call 22data call settings 61, 88declining 21fixed dialing 93forwarding 25making 21making a net call 24muting the ringing tone 21net call alert 86net calls 23push to talk 72rejecting 21rejecting calls with textmessage 86restricting 26restricting net calls 26restricting outgoing calls 93selecting call type 86settings 85, 86111Indexfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 111 Jan 8, 2007 1:39:30 PM
video calls 22voice commands 75voice dialing 75voice mail 27camera 79capturing an image 79light sensitivity 80recording a video clip 80self-timer 80sequence mode 80using the toolbar 80capture key 79car kitremote SIM access 59cell broadcast 29settings 40cell broadcast messages 35Certificate manager 93certificates 93changing the lock code 94channelsnews ticker 13push to talk 73radio 82chatSee IMChr key 11Clock 47alarms 47settings 47world clock 47conference calls 22configuration messages 89Connection manager 56connection methodsBluetooth 56cable 55infrared 60modem 55connection settings 86connectionsdata call 61ending 56GPRS settings 61internet 60WLAN settings 65contact groups 43contactsadding thumbnails 42changing name order 43copying information 42creating 42default information 42editing 42groups 43ringing tones 43searching 42sending 42SIM card contacts 42voice tags 42convertingcurrencies 52measurements 51currency conversions 52Ddata and softwaremanagement 90data back-ups 90data call settings 88data synchronization 91date changing 84settings 84deletingpairing 58destinationremoving 71setting 71device management 90Device manager 90digital certificates 93displaybrightness 83contrast 83language 84light time-out 83screen saver 83settings 83welcome note 83Ee-mailaccounts 39automatic retrievalsettings 40connecting to mailbox 34creating folders 35deleting 35messages 32replying 34retrieval settings 40112Indexfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 112 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 112 Jan 8, 2007 1:39:30 PM
setting up 33user settings 39EAPplug-in settings 88using an EAP plug-in 88ending internet connections 67network connections 56enhancementsremote SIM access 59settings 85equalizer 78frequency settings 79FFile manager 48managing files 48filesaudio files 77downloading 81file rights 91flash files 79image files 81sending 48video files 77find 48fixed dialing 93Flash player 79forwarding calls 25frequency settings 79GGallery 81general settings 83Global positioning systemSee GPSGPRSaccess point settings 61settings 87GPS 68GPS data 70Hhearingcall information 74contacts 74current time 74help 17IIM 36groups 37settings 36starting a conversation 36images 81adding to contacts 80, 82adjusting 80background images 80capturing 79color effect 80printing 80renaming 82rotating 81sending 82timing 80wallpaper 82white balance 80zooming 81infrared 60instant messagingSee IMinternet 66access points 60browsing 66ending connections 67settings 60internet telephonySee net callsKkey store 94keypad tones 84keypress time-out 84keysshortcuts 84Llandmarks 71creating 71languagechanging 14display language 84settings 84writing language 84lights 85listening to music 78lock codechanging 94locking the device 94Log 28adding numbers toContacts 28113Indexfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 113 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 113 Jan 8, 2007 1:39:30 PM
deleting 28settings 28logosoperator logo 84welcome logo 83MMAC address 87mailSee e-mailmailboxesconnecting 34creating 33making a call 21Maps 68browsing 68planning routes 70saving locations 69searching 70settings 69measurementsconverting 51measuring systemchanging 71media applications 77memorydetails 16memory card 16backing up data 90formatting 17locking 94microSD 16passwords 94setting a password 17setting password 48unlocking 17menu 11menu key 11message reader 30, 74messages 29call rejection messages 86cell broadcast messages 35cell broadcast settings 40configuration messages 89e-mail 32folders 29multimedia messages 31other settings 41picture messages 30service messages 37special messages 35text message settings 38text messages 30writing 13Messaging 29Drafts folder 29folders 29Outbox folder 29Sent folder 29microSD 16MMSSee multimedia messagesmodem 55multimedia messages 31creating 31creating presentations 32sending 31settings 38Music player 78track lists 78Nnavigation 70net calls 23alert settings 86connecting 24making a call 24profiles 24, 89restricting 26settings 86, 89network selecting mode 86settings 86news channels 13news ticker 13subscribing to channels 13Nokia PC Suite 18Nokia Team Suite 49editing teams 50notesediting 54writing 53Ooperatorlogo 84selecting 86original settings 85Ppacket dataaccess point settings 61114Indexfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 114 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 114 Jan 8, 2007 1:39:30 PM
settings 87pairingdevices 58passcode 58passcode 58passwordsmemory card password 17,48restriction password 26PC Suite 18PDF reader 52personal certificates 93personalization 15changing language 84display 83settings 83standby modes 84tones 84phoneSee callspicture messages 30viewing 30planning routes 70playingmessages 30music 78video and audio 77video clips 80voice recordings 74predictive text input 14, 84presentationscreating 32viewing 32printing 52profiles 15creating 15customizing 15net call profile 24, 89PTTSee push to talkpush messages 37push to talk 72contacts 73creating a channel 73exiting 73logging in 72making a call 72settings 72QQuickoffice 50Rradio 82adjusting volume 82saving channels 82tuning channels 82RealPlayer 77playing media clips 77settings 78recorder 73playing voice memos 74recording a memo 74recordingcalls 74video clips 80voice 73remote configuration 90remote lock 94remote synchronization 91restoring original settings 85restrictingcalls 26net calls 26restriction password 26rights 91ringing tones 43ringing type 84selecting 84vibrating alert 84volume 84routesplanning 70Ssatellite signal strength 71savingcurrent position 71files 12settings 12screen saver 83scroll key 11Search 48searchingavailable WLANs 56contacts 42locations 70securityBluetooth 59memory card 94settings 85115Indexfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 115 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 115 Jan 8, 2007 1:39:30 PM
security module 94sendingcontacts 42files 12, 48images 82using Bluetooth 57videos 23service commands 35service messages 37session initiation protocolSee SIPsettings 83applications 89call forward 25calls 85, 86cell broadcast 40clock 47connection 86data call 88date 84device security 85display 83e-mail retrieval 40e-mail user 39EAP plug-ins 88enhancements 85frequency 79general 83GPRS 61, 87IM 36internet 60language 84Log 28Maps 69multimedia messages 38net call 89network 86packet data 87personalization 83profiles 15push to talk 72RealPlayer 78restoring 85SIP 89standby mode 84telephone 85text messages 38time 84tones 84voice commands 76voice recorder 74Web 67WLAN 87WLAN access point 65WLAN security 88Settings wizard 18sharing videos 23shortcuts 96applications 84keys 84SIM access profile 59SIPcreating profiles 86, 89settings 89SMS See text messagessoftware packagesremoving 90special messages 35Speech 74standby modes 12active standby 12basic standby mode 13settings 84Sync 91synchronization 91synchronization profiles 91Ttabs 12taking a picture 79telephoneSee callstelephone settings 85textletter mode 13number mode 13predictive input 14traditional input 13writing 13text messagessending 30settings 38writing 30text sizechanging 83themes 15time changing 84settings 84to-do entries 45tonesalert tones 84keypad tones 84116Indexfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 116 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 116 Jan 8, 2007 1:39:30 PM
settings 84warning tones 84touch tones 26track lists 78traditional text input 13Transfer 19transferring databetween devices 19using Bluetooth 19using infrared 19trip destination 71trip meter 71tutorial 17UUSB data cable 55Vvibrating alert 84video calls 22making a call 22switching to voice call 22video clips 77, 80playing 77, 80video sharing 23receiving invitations 23Voice aid 74voice commands 75launching an application 75setting on a profile 76settings 76voice dialing 75voice mail 27calling 27changing number 27voice memos 74voice over IPSee net callsvoice recordersettings 74volume 15radio 82VPNaccess points 89Wwallpaper 82WAP push messages 37warning tones 84Web 66settings 67Welcome 10welcome note 83Wi-FiSee WLANWireless keyboardconnecting 53disconnecting 53wireless LANSee WLANWLAN 63access point settings 65access points 64availability 63EAP 88MAC address 87searching for networks 56security settings 88settings 87WLAN wizard 64world clock 47writing language 14ZZip manager 52117Indexfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 117 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 117 Jan 8, 2007 1:39:30 PM

Navigation menu