Microsoft NSB-6NX PCS Band GSM Hand Held Cellular Telephone User Manual Manual

Microsoft Mobile Oy PCS Band GSM Hand Held Cellular Telephone Manual

Manual

8890 UG version 0.08 11/30/99Nokia 8890Owner’s Manualversion 0.08To do:• Add headset to “voice dialing” section and review with Georg.• Complete illustrations on pages 91, 92, and 118.• Check feasibility of generating index 8890titl.fm Page 1 Tuesday, November 30, 1999 3:54 PM
8890 UG version 0.08 11/30/99The wireless phone described in this guide is approved for use in GSM 900 and GSM 1900 networks.Copyright informationPart No. 935nnnn, Issue No. 1, n.nn© 1999 Nokia Mobile Phones. All rights reserved.Printed in Canada nn/99Nokia, Nokia Connecting People and the Original Accessories logos are trademarks of Nokia Corporation and/or its affiliates.US Patent No 5818437 and other pending patents. T9 text input software Copyright (C) 1999. Tegic Communications, Inc. All rights reserved.The information contained in this Owner’s Manual was written for Nokia phone NSB-6. The right to make changes and improvements to any of the products described in this guide without prior notice is reserved.These commodities are authorized by the U.S. Government for export only to Canada, Mexico, or the United States. They may not be resold, diverted, transferred, or otherwise disposed of in any other country, either in their original form or after being incorporated through an intermediate process into other end-items, without the written approval of the U.S. Department of State.FCC/Industry Canada NoticeYour phone may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility.This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.8890ug.book Page 2 Tuesday, November 30, 1999 3:39 PM
8890 UG version 6 i 11/30/99ContentsFor Your Safety...........................1Your Phone’s Label....................2Welcome ...................................3Using this guide.........................3Documentation conventions............................3Terms........................................4Accessing this guide online............................................4Keys and features......................5Front.........................................5Back..........................................5Left side...................................6Bottom.....................................6Network Services.......................7Contacting Nokia.......................7Contacting Your Service Provider........................................8Before You Begin......................9Preparing Your Phone for Use..........................................9Installing the SIM Card.......9Notes about SIM cards......10Installing the Battery.........10Charging the Battery.........10Removing the battery........11About Your Phone..................12Switching on your phone......12Start screen...............................12Indicators and icons.......... 13How to make and answer calls......................................15Making a call............................15Checking the signal strength.................................15Using the keypad................15Using the phone book.......16Using the sliding cover......16Advanced calling options...................................17Adjusting the earpiece vol-ume during a call................17Ending a call.............................17Answering a call......................18Rejecting a call........................18Redialing the last-dialed number.......................................18Dial any of the 10 last dialed numbers....................18The menu.................................19Using the menus......................19Selection keys......................19Scroll keys.............................19Scroll bar...............................20Help text...............................20Menu shortcuts........................20List of menu shortcuts...........218890ug.book Page i Tuesday, November 30, 1999 3:39 PM
8890 UG version 6 ii 11/30/99Entering letters and numbers...............................25Standard text input.................25ABC mode..............................25123 Mode..............................27Using special characters in names and phone numbers.................................27Phone book.............................28Saving names and numbers......................................28Saving a name and number...................................28Saving a number only........28Saving a name and number while in a call.......................28If your phone book is full.......................................29Finding names in the phone book.............................................29From the start screen.........29While in a call......................29Editing names and numbers......................................30Erasing names and numbers......................................30Erasing stored names and numbers.........................30Erasing your entire phone book...........................30Two types of memory.............31Switching between internal memory and SIM memory..................................31Call log.......................................32Dialed calls...........................32Received calls......................32Missed calls..........................32Clearing call lists................34Voice Mail...............................35Saving the Voice Mailbox Number......................36Working with Two Phone Lines..........................36Listening to Your Voice Messages...................................36Profiles ....................................37Selecting profiles.....................37Advanced calling features .....38Active call options..................38Call waiting..........................38Using the in-call menu.....40Putting a call on hold........41Making a new call..............41Sending touch tones..........41Ending all calls....................42Accessing the phone book........................................42Accessing menus.................43Muting/unmuting the microphone..........................438890ug.book Page ii Tuesday, November 30, 1999 3:39 PM
8890 UG version 6 iii 11/30/99Conference calls..................43Transferring a call...............44Call forwarding.........................45Activating call forwarding ............................45Canceling call forwarding ............................46Call forwarding status.......46Automatic redial......................47Activating automatic redial.......................................47Calling card...............................47Saving calling card information...........................47Choosing a calling card.....48Making a calling card call.............................................49Using voice dialing..................49Adding a voice tag to a phone book entry................49Notes about voice tags......50Making a call using voice recognition.................50Playing back a voice tag...51Changing a voice tag.........51Erasing a voice tag.............511-Touch Dialing........................52Assigning a number to a 1-Touch Dial key.................52Calling a 1-touch dial number...................................52Changing 1-Touch Dialing Numbers.................53Erasing 1-Touch Dialing Numbers.................53Making an international call..54Using the phone book............54Phone Book Menus.............54Caller groups ............................55Add names to a caller group......................................55Removing names from a caller group..........................55Assigning a ringing tone to a caller group..........................55Renaming a caller group..56Group graphics....................56Call timers.................................57If you have two phone lines........................................57Viewing the call duraton..57Resetting call timers to 0.57Showing call timer during calls...........................58Using call cost limits..............58Setting a call cost limit.....58Removing a call cost limit........................................59Showing call costs..................59Viewing call costs...............59Clearing call cost counters.................................59Showing costs in.....................608890ug.book Page iii Tuesday, November 30, 1999 3:39 PM
8890 UG version 6 iv 11/30/99Customizing your phone........61Profiles........................................61Selecting a profile...............61Customizing the profile.....61Rename a profile.................65Accessory profiles...............65Car profile.............................66Restore factory settings.........66Display language......................66Clock............................................67Setting the clock.................67Selecting the time format....................................67Displaying the clock...........67Automatic update of date and time................................68Security features ....................69Locking the keypad (Keyguard)..................................69Locking/unlocking the keys using the sliding cover.......................................69Locking/unlocking the keys with the sliding cover open........................................69PIN and PUK codes..................70PIN codes...............................71PUK codes..............................72Security code............................73Fixed dialing..............................73Turning fixed dialing on or off............................................73Adding numbers to the fixed dialing list.............................74Restricting calls.......................74Turning on call restrictions............................74Setting up a closed user group...........................................75How to select a system..........76Text messages.........................77Setting up text messaging....77Saving your message center number.....................77Writing messages....................78Using standard text input.......................................78Using predictive text input.......................................78Predictive text input tools........................................79Saving messages in the Outbox...................................82Sending the text message.................................82Resending a message from the Outbox................................83Reading text messages..........84Reading new text messages now.........................................848890ug.book Page iv Tuesday, November 30, 1999 3:39 PM
8890 UG version 6 v 11/30/99Reading new text messages later.....................84Erasing a message...................84Replying to a message......... 85Forwarding a message...........85Retrieving a number...............85Message settings.....................86Changing settings for some messages....................86Changing common settings for all messages................. 87Message storage......................87Picture messages.....................87Sending picture messages...............................88Sending picture messages with text................................88Receiving picture messages...............................89Other picture message options...................................89Your Personal Digital Assistant..............................90Calendar.....................................90Starting the calendar.........90Entering the date................90Entering the time................91Calendar options.................91Sending/receiving calendar notes.....................93Alarm clock................................94Setting the alarm clock.....94Handling the alarm............94Turning off the alarm clock.......................................95Business cards..........................95Send a business card.........95Send a business card using IR.............................................95Viewing a received business card.........................................96Saving a viewed businesscard.........................................96Deleting a viewed businesscard.........................................96Calculator..................................97Using the calculator...........97Currency conversion..........97Your phone and other devices .................................99Fax and data calls...................99Make a fax or data call.....99Receive a data or fax call.99Sending information via IR.........................................100Preparing the devices for infrared connection .........100Receiving data via the IR port..................................100Sending data via the IR port.......................................100Check the status of an IRconnection..........................1018890ug.book Page v Tuesday, November 30, 1999 3:39 PM
8890 UG version 6 vi 11/30/99Printing using IR...................101Printing text messages...101Printing phone book entries.................................101Connecting to your PC........102Synchronizing your data.....102Fun and games .....................103Games......................................103Snake...................................103Logic.................................... 103Memory...............................104Rotation..............................104Downloading ringing tones.........................................104Notification of received ringing tone.......................104Listening to received ringingtones....................................104Saving received ringingtones....................................105Discarding received ringingtones....................................105Reference Information.........106Using Batteries, Chargers, andAccessories..............................106Important Safety Information.............................108Traffic Safety......................108Operating Environment...108Electronic Devices............109Potentially Explosive Atmospheres......................110Vehicles...............................111Emergency Calls ....................111Making an Emergency Call........................................112Radio Frequency (RF) Signals.................................112Care and Maintenance....113Accessories............................ 114Batteries...................................115Chargers and Other Accessories..............................116Technical information..........119Troubleshooting....................120Frequently Asked Questions(FAQ)..................................1228890ug.book Page vi Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 1 ]•For Your SafetyThis section provides various safety guidelines. Read this information before using your mobile phone (which will now be referred to as “phone”). Failure to comply with these guidelines could prove either dangerous or illegal. For more detailed safety information, refer to “Important Safety Information” on page 108.Road Safety Comes FirstDon’t use a phone while driving. Park the vehicle first.Switch Off In HospitalsSwitch off your phone when you are in a hospital or when you are near medical equipment. Follow any regulations or rules that are in force.Switch Off On AircraftDo not use phones on airplanes as this can cause interference with the navigational equipment. Also, the use of phones on airplanes is illegal.Switch Off When RefuelingDo not use the phone at a refueling point or near fuel or chemicals of any kind.Switch Off Near BlastingDo not use the phone where blasting is in progress. Observe restrictions and follow any regulations or rules that are in force.InterferenceAll phones are susceptible to interference, which could affect performance. This could impede the making of an emergency call.Use SensiblyUse only in the normal position (to ear). Avoid unnecessary contact with the antenna when the phone is on.Qualified ServiceOnly qualified service personnel can install or repair cellular phone equipment.8890ug.book Page 1 Tuesday, November 30, 1999 3:39 PM
[ 2 ] 8890 User Guide v8 11/30/99Accessories and BatteriesUse only approved accessories and batteries. Do not connect incompatible products.Connecting to Other DevicesWhen connecting to any other device, read its user’s guide for detailed safety instructions. Do not connect incompatible products. Remember to make backup copies of all important data.Making CallsEnsure the phone is switched on and in service. Enter the phone number, including the area code, then press . To end a call press . To answer a call press .Emergency CallsEnsure the phone is switched on and in service. If the word appears on the screen above the right selection key, press and hold it to clear the display. Enter the emergency number, then press . Give your location. Do not end the call until told to do so.Infrared PrecautionsDo not point the infrared (IR) beam at anyone’s eyes or allow it to interfere with other IR devices.•Your Phone’s Label If you remove your battery (refer to “Removing the battery” on page 11) you can find the phone’s label on the back portion of the phone. This label includes various information about the phone, like the model number.If you ever have to call Nokia (refer to “Contacting Nokia” on page 7) or your Service Provider (refer to “Contacting Your Service Provider” on page 8), you might be asked for this information. Therefore, do not remove the phone’s label.8890ug.book Page 2 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 3 ]Welcome1. WelcomeCongratulations on your purchase of a Nokia 8890 mobile phone. You are now on your way to using a new and exciting tool.However, before you use your phone, read this chapter. It provides information you need for using this guide contacting Nokia.•Using this guideFor clarity, this guide uses various icons and terms. These icons and terms are described in “Indicators and icons” on page 13 and “Terms” on page 4.Additionally, the guide describes various Network Services features, enabled by your Service Provider. Refer to “Network Services” on page 7.Documentation conventionsThis guide uses various types of texts to indicate specific items. These are called documentation conventions. The table below lists and describes these conventions:Convention Descriptionbold italic Indicates emphasized text.Example: You cannot use your phone without this card.bold Indicates one of the following items:•Text displayed on your phone’s screen.Example: or .•Special text such as Notes and Warnings. •A Web link Example: Nokia’s World Wide Web site at www.nokia.com.8890ug.book Page 3 Tuesday, November 30, 1999 3:39 PM
[ 4 ] 8890 User Guide v8 11/30/99TermsThis guide uses the following terms:Press means to briefly press and release a button.Press means to press the selection key that is below . Cross references appear as "see page x."Press and hold means to press and hold a button for one to three seconds (depending on the feature being used), then release the button.•Accessing this guide onlineThe latest version of this Owner’s guide might be available on Nokia’s World Wide Web site at www.nokia.com. Go to Phones, US link, and then perform a search to access this documentation.8890ug.book Page 4 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 5 ]Welcome•Keys and featuresFront1- power key2- earpiece3- screen4- selection and scroll keys5- talk key6- end key7- number keys8- sliding cover9- microphoneBackantenna back cover release1234567898890ug.book Page 5 Tuesday, November 30, 1999 3:39 PM
[ 6 ] 8890 User Guide v8 11/30/99Left sideearpiece volume buttons IR portBottom charger connection Headset/car kit connection8890ug.book Page 6 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 7 ]Welcome•Network ServicesA number of features known as Network Services are described in this guide. These are special services to which your wireless service provider can give you access.These services include the following:•Voice Privacy•Call Forwarding•Call Waiting•Send Own NumberHowever, before you can take advantage of these Network Services features, you must subscribe to them through your service provider.Your service provider will give you instructions on how to uses these Network Services. This guide will instruct you on when you need to contact your service provider for more step-by-step information.Whenever this guide talks about a Network Services feature, the text will not only tell you that this feature is a Network Services feature, but the text will also display the following icon ++ after the first mention of this feature within a chapter.Note: Some networks might not support all language-dependent characters and/or services.•Contacting NokiaNokia’s Customer Service department is available to provide you with help or more information. However, before you contact this department, please have the following information available:•the phone’s model number•the phone’s IMEI (serial) number•your zip code8890ug.book Page 7 Tuesday, November 30, 1999 3:39 PM
[ 8 ] 8890 User Guide v8 11/30/99To find the model and serial number, you have to remove the battery. Refer to “Removing the battery” on page 11 for step-by-step instructions on this procedure.Finally, if you are calling about any type of phone accessory, please have the accessory available. For example, if you are calling about a headset, please it handy. This way, if you are asked a specific question about this accessory, it will be available for quick reference.Customer Service, USANokia Mobile Phones7725 Woodland Center Boulevard, Suite 150Tampa, FL 33614Tel:1-888-NOKIA2U (1-888-665-4228)or (1) 813-880-5850Fax: (1) 813-249-9619TTY:1-800-24NOKIA (1-800-246-6542)Customer Service, CanadaNokia Products Ltd.575 Westney Rd. SouthAjax, Ontario L1S 4N7Tel:(1) 905-427-6654•Contacting Your Service ProviderSome service providers enable you to contact them by programming the number 2 key on your phone with their customer service numbre. Then you can call them by pressing and holding the number 2 key. This feature can be helpful if you’re having difficulties dialing a number, especially when traveling outside your home area.If your service provider deems your problem to be Nokia-related, then the service provider will let you know.Note: This one-key feature might not be available on all systems. Contact your service provider for availability.8890ug.book Page 8 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 9 ]Before You Begin2. Before You BeginBefore you begin using your phone, there are several tasks that you need to perform. This section tells you how to complete these tasks.•Preparing Your Phone for UseTo prepare your phone, you need to perform several steps, which are described in the following subsections:•“Installing the SIM Card” (see below).•“Installing the Battery” on page 10•“Charging the Battery” on page 10Additionally, to find out how to remove a battery, refer to “Removing the battery” on page 11.Installing the SIM Card1Switch off the phone.2With the back of the phone facing you, press the back cover release button and slide the back cover off.3Align the SIM card:- beveled corner on the left- gold contact area downward.4Insert the SIM card.8890ug.book Page 9 Tuesday, November 30, 1999 3:39 PM
[ 10 ] 8890 User Guide v8 11/30/99Notes about SIM cards•Keep all miniature SIM cards out of the reach of small children.•The SIM card and its contacts are easily damaged by scratches or bending, so be careful when handling, inserting or removing the card.•You must remove the battery to access the SIM card. Always make sure that the phone is switched off before you remove the battery.Installing the Battery1Place the battery in the compartment with the label side facing up and the golden contact area aligned with the contact prongs.2Slide the battery into place.3Slide the cover back into placeCharging the BatteryTo charge the battery, perform the following steps:1Connect the lead from the charger to the bottom of the phone.2Connect the charger to a standard wall outlet. The displays shows and the battery power indicator (or battery bar) starts scrolling.8890ug.book Page 10 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 11 ]Before You BeginNote: If the battery is completely empty, it might take a few minutes before the battery bar appears on the screen. Tip: You can use the phone while it’s charging.3When the battery bar stops scrolling, appears and the battery charge is complete.Note: The charging time depends on the charger and battery that you use. For example, the charging time for the BLS-2S battery with the ACP-8 charger is about 2 hours.4Disconnect the charger from the phone.Removing the battery1Switch off the phone.2Press the back cover release button and slide off the cover.3Lift out the battery.lift the battery8890ug.book Page 11 Tuesday, November 30, 1999 3:39 PM
[ 12 ] 8890 User Guide v8 11/30/993. About Your Phone•Switching on your phoneTo switch your phone on, press and hold for more than a second. The phone might ask for a Personal Identification (PIN) code or a security code. See “PIN and PUK codes” on page 70 for more information.Warning! Do not switch on the phone in places where wireless phone use is prohibited or where the use of the phone could cause interference or danger.Tip: As with any other radio transmitting device, do not touch the antenna unnecessarily when the phone is switched on. Contact with the antenna affects call quality and might cause the phone to operate at a higher power level than otherwise needed.•Start screenWhen you turn on your phone, the first screen that appears is the Start Screen. In the middle of the Start Screen, you see information indicating which wireless network your phone uses. This information can vary between phones.Two indicators also appear on this Start Screen. These indicators and other icons are described in the next section.8890ug.book Page 12 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 13 ]About Your PhoneIndicators and iconsOn your phone, you have two types of identifiers: indicators and icons. Icons are graphical representations of a specific item or situation. For example, this icon appears when you have a voice message waiting to be heard. (Some systems use a different method.)Indicators show the status of something. The phone uses three types of indicators:•Signal strength indicator - shows the strength of the signal to your phone. •Battery power indicator - shows how much power is left in your phone’s battery.•Volume indicator - shows the earpiece volume level.The rest of this section shows examples of each icon that can appear on your phone and tells you what these icons indicate: Line 1 is selected for outgoing calls.Line 2 is selected for outgoing call.You have an active call.You have one or more new voice messages.You have one or more new text messages. signalstrengthindicatorbattery powerindicator (or batterybar)8890ug.book Page 13 Tuesday, November 30, 1999 3:39 PM
[ 14 ] 8890 User Guide v8 11/30/99(If blinking, text message memory is full.)Keyguard is on. Your phone will not accept any keypresses. The alarm clock is set.The quick alert setting is selected, or you have set the ringing option to .Incoming voice calls are being forwarded to another number. You have forwarded all voice calls that are received on line 1.You have forwarded all voice calls that are received on line 2.You have forwarded all voice calls that are received on lines 1 and 2.The phone is ready for you to enter a response.Characters entered will be uppercase letters. Press to switch letter case.Characters entered will be lowercase letters. Press to switch letter case.Characters entered will be numbers. (When entering letters, switch to numbers by pressing and holding .)You are in “special character” mode; select a character, then press . (When entering letters, switch to special characters by pressing the key.)Predictive text mode.Predictive text mode. Characters entered will be uppercase letters. Press to switch letter case.Predictive text mode. Characters entered will be lowercase letters.Press to switch letter case.Predictive text mode. Characters entered will be numbers.Indicates the current call.Indicates a call on hold8890ug.book Page 14 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 15 ]How to make and answer calls4. How to make and answer calls•Making a callChecking the signal strengthThe signal indicator on the left side of your phone’s screen shows the strength of the network radio signal. The indicator scrolls as the signal strength increases and decreases.To get the strongest signal, try moving your phone slightly. If you’re inside a building, move toward a window.Using the keypad1Enter the area code and phone number.2Press .Note: Hold the phone as you would any other telephone, with the antenna pointed up and over your shoulder.Tip: As with any other radio transmitting device, do not touch the antenna when the phone is switched on. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed.WARNING! Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.8890ug.book Page 15 Tuesday, November 30, 1999 3:39 PM
[ 16 ] 8890 User Guide v8 11/30/99Using the phone book1From the start screen, press or and scroll to the number you want. 2Press to make the call.•To skip ahead quickly in the list, press the number key that matches the first letter of the name.Using the sliding coverProtect your phone’s number keys and answer or end calls with the sliding cover.•To open, slide the cover down.•To close, slide the cover up until it locks into place.When the sliding cover is closed, you can use your phone book to make calls (see “Phone book” on page 28) but you cannot use the number keys.Use the sliding cover to answer, end, and reject calls•To answer an incoming call, slide the cover down.•To end or reject an incoming call, slide the cover up.•To close the cover without ending a call, press before you close the cover. When you close the sliding cover, this screen appears.Note: When you connect the phone to a Headset or a Car Kit, the sliding cover is deactivated. Press , , , or to answer, end, or reject calls.8890ug.book Page 16 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 17 ]How to make and answer callsMaking calls with the sliding cover closedEven with the sliding cover closed, you can still:•Make a call with the redial feature (see “Redialing the last-dialed number” on page 18)•Make a call from the phone book (see “Phone book” on page 28)•Make a call with the voice tag feature (see “Using voice dialing” on page 49)Advanced calling options•Making an international call - see “Making an international call” on page 54•Making a call using the voice tag feature - see “Using voice dialing” on page 49 •Making a 1-touch call - see “1-Touch Dialing” on page 52Adjusting the earpiece volume during a call •To increase the volume of a call, press the upper part of the volume key.•To decrease the volume, press the lower part of the volume key.If an accessory with its own loudspeaker is connected to your phone, the volume keys adjust the volume for that accessory.•Ending a callPress or close the sliding cover.8890ug.book Page 17 Tuesday, November 30, 1999 3:39 PM
[ 18 ] 8890 User Guide v8 11/30/99•Answering a callWhen someone calls you, the phone alerts you (see “Ringing options” on page 62) and flashes on the display. To answer, press any key except or , or open the sliding cover.•Rejecting a callPress , or close the sliding cover.•Redialing the last-dialed number•Press twice.Dial any of the 10 last dialed numbers1Press .2Scroll to the number you want to redial.3Press again.8890ug.book Page 18 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 19 ]The menu5. The menuYour phone offers an extensive range of functions which are grouped in menus and submenus. Access these menus with the selection keys and scroll keys, or by entering the appropriate shortcut number.•Using the menusSelection keysBelow the display, you will find two selection keys. Their functions depend on the text above the keys. For example, in this screen, the word Menu appears above the selection key. Press the key to enter the menu function. Similarly, press the key under Names to access phone book functions.Scroll keysUse the scroll keys, located just below the screen, to scroll through your phone’s menus and phone book.Selection keysScroll keys8890ug.book Page 19 Tuesday, November 30, 1999 3:39 PM
[ 20 ] 8890 User Guide v8 11/30/99Scroll barWhile using your phone’s menus, a scroll bar appears at the far right of the screen. This bar indicates where you are in the menu and each numbered “tab” on the bar represents a different menu item.For example, press once. The scroll bar appears with the first (top) tab displayed. A different tab appears each time you press or .Help textMany menu items have brief help text. To view the help text, scroll to the menu item and wait for about 15 seconds. Press to see the next page of the text or to exit.•Menu shortcutsWhen you scroll to a menu item, the menu number appears on the screen above the scroll bar. If you learn some of these menu numbers, you can use them to quickly get to different features instead of having to scroll to them through the menu.•To use a shortcut, press and then the menu number.•For faster access, press , then 0, then the menu numberFor example, to get to press 0 4 1.8890ug.book Page 20 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 21 ]The menu•List of menu shortcutsHere is an abbreviated list of menu items and their menu shortcuts.1 Messages1 Inbox2 Outbox3 Write messages4 Picture messages5 Message settings1 Set 1 (up to five sets may appear)1 Message center number2 Messages sent as3 Message validity4 Rename this set2Common1 Delivery reports2 Reply via same center6News & info service7 Service command editor8 Fax or data call1 Fax and data2 Also voice9 Voice messages1 Listen to voice messages2 Voice mailbox number2Call log1 Missed calls2 Received calls3 Dialed calls8890ug.book Page 21 Tuesday, November 30, 1999 3:39 PM
[ 22 ] 8890 User Guide v8 11/30/994 Clear call lists5 Call timers1Last call1 Current call6 Call costs7 Call cost settings1 Call cost limit2Show costs in3Profiles1Normal1Activate2Customize1 Ringing options2 Ringing tone3 Ringing volume4 Vibrating alert5 Message alert tone6 Keypad tones7 Warning and game tones2 Silent3Meeting4 Outdoor5Pager6Car1 Lights7 Headset1Auto answer8890ug.book Page 22 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 23 ]The menu4 Settings1 Alarm clock2 Clock3 Auto update of date and time4 Call settings1 Automatic redial2 Calling card3 Closed user group4 Send own caller ID when calling5 Call waiting6 Line in use (see your service provider)5 Phone settings1 Language2 Cell info display3 List of own numbers4 System selection5 Touch tone length6 Notifications on SIM update7 Restore factory settings6 Security settings1 SIM card security2Phone security3 Call restrictions4 Fixed dialing5 Change access codes1 Change PIN code2 Change PIN2 code3 Change security code4 Change restriction password8890ug.book Page 23 Tuesday, November 30, 1999 3:39 PM
[ 24 ] 8890 User Guide v8 11/30/995 Forwarding (see your service provider)1 Forward all voice calls2 Forward if busy3 Forward if not answered4 Forward when phone off or no coverage5 Forward when not able to take calls6 Forward all fax calls7 Forward all data calls8 Cancel all call forwarding6Games1Memory2Snake3 Logic4 Rotation7Calculator8Calendar9Infrared10 SIM services (if supported by your SIM)8890ug.book Page 24 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 25 ]Entering letters and numbers6. Entering letters and numbersYou can enter letters and numbers into your phone for a person’s name and phone number, writing a text message, and so on. There are two ways to do this:•standard text input, for making entries in the phone book, entering calendar notes, and renaming caller groups. •predictive text input, for writing text messages and picture messages. See “Using predictive text input” on page 78 for more information.•Standard text inputABC modeThis is the default mode. The ABC icon appears as visual confirmation. 1Find the key that is below the letter you want to enter.2Press it as many times as needed for the letter to appear on the screen.For example, to enter the name John:Press Press Press Press 8890ug.book Page 25 Tuesday, November 30, 1999 3:39 PM
[ 26 ] 8890 User Guide v8 11/30/99Depending on the selected display language, the following characters may be available. Note: Some networks may not support all language-dependent characters.Entering spaces and punctuation•To enter a space, press once.•To enter punctuation, press repeatedly until the character you want appears.Erasing mistakesIf you make a mistake, press to erase that character. Press as needed to erase more than one character, or press and hold to erase the entire field of characters.Changing letter caseTo switch between upper- and lowercase letters, press .The icon switches to , indicating you are using lower case.Key Characters Key Characters1@, .,?!-1 7PQRS72ABC2 8TUV83DEF3 9WXYZ94GHI4 0space, 05JKL5 *(See page 27 for details.)6MNO6 #Changes letter case8890ug.book Page 26 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 27 ]Entering letters and numbers123 ModeTo enter numbers, you can:•press and hold and switch to 123 Mode. Your phone displays the icon. Press the appropriate number key to enter a number. OR•while in ABC mode, press and hold the corresponding number key until the number appears.As with the ABC mode, if you make a mistake, press to erase that character. To switch back to the ABC mode, press and hold again.Using special characters in names and phone numbersIn ABC Mode:1Press and hold . A screen appears with the following special characters available:. , ? ! : ; - + # * ( ) ‘ “ _ @ & $ £ % / < > ¿ ¡ § = ¤ j ¥2Use the scroll keys to select the character you want, then press . In 123 Mode:You can access the following special characters only in 123 Mode:*Use this character to send command strings to the network. Contact your service provider for details.+Use this character as a prefix for dialing international telephone numbers.pUse this character to create a pause that occurs when dialing a number. Numbers entered to the right of this special character are automatically sent as touch tones after a 2.5 second pause.wThis character creates a wait; digits to the right of the are not sent until you press 8890ug.book Page 27 Tuesday, November 30, 1999 3:39 PM
[ 28 ] 8890 User Guide v8 11/30/997. Phone bookUse the phone book to store names and phone numbers. •A phone book entry can consist of a number only, or name and number.•A name may appear only once in the phone book. If you try to save a name that already exists in the phone book, the phone asks if you want to replace the existing name.•Saving names and numbersSaving a name and number1Enter the phone number and press .2Enter a name, then press .Note: For international dialing, press twice enter the + symbol in front of the phone number.Saving a number only1Enter the phone number.2Press and hold .The number is saved in your phone book. You can add a name to it later.Saving a name and number while in a call1Press .2Scroll to , then press .8890ug.book Page 28 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 29 ]Phone book3Scroll to , then press .4Enter the name, then press .5Enter the phone number, then press .If your phone book is fullIf your phone book is full, you can save the phone number to another memory or replace an existing entry.•Scroll to the entry you want to replace, then press .•Finding names in the phone bookFrom the start screen•Press or .OR•Press appears highlighted. Press the number key that matches the first letter of the name.While in a call1Press .2Scroll to and press .3Search is highlighted. Press the number key that matches the first letter of the name.ORPress . When the box appears, enter the name and press . You can enter just the first few letters of the name, then press 2.. Your phone will show the closest matching name.8890ug.book Page 29 Tuesday, November 30, 1999 3:39 PM
[ 30 ] 8890 User Guide v8 11/30/99•Editing names and numbersAt the start screen,1Recall the stored name, press , then press .2Scroll to , then press .3Edit the name, then press .4Edit the number, then press .•Erasing names and numbersErasing stored names and numbersAt the start screen,1Recall a stored name.2Press , then 3Highlight , then press , then Note: You cannot undo Erase functions, so be careful!Erasing your entire phone bookCaution! This feature erases your entire phone book and can’t be undone!1Press .2Scroll to and press .3Scroll to and press .4Scroll to the memory (Phone or SIM card) you want to erase, then press .5When you see ,press . 6When the prompt appears, enter your security code and press .8890ug.book Page 30 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 31 ]Phone book•Two types of memoryYour phone has both phone memory and SIM card memory. You can save names and numbers in either memory. The internal phone memory can store 250 names and numbers. The SIM card may hold up to 250 names and phone numbers (this varies by SIM). To help determine which memory would be best for you, refer to the following table:Switching between internal memory and SIM memory1From the Start Screen, press .2Scroll to , then press .3Scroll to , then press .4Scroll to or , then press .Note: Whenever you insert a SIM card for the first time, or if you insert a different SIM card, SIM card memory is automatically selected. Internal Memory SIM Card MemoryName capacity up to 250 names* up to 250 names (varies according to each SIM card)Can easily transfer names and numbers to another phone?No Yes8890ug.book Page 31 Tuesday, November 30, 1999 3:39 PM
[ 32 ] 8890 User Guide v8 11/30/99•Call logThis network feature automatically keeps track of numbers you’ve dialed, numbers that have called you, and the amount of time you’ve spent in calls.Dialed callsYour phone saves the last 10 numbers you’ve dialed.1Press 2 3.2Scroll to the number you want to see information about.3To dial the number, press ; for other options, press (see “Options in call lists” on page 33).Received callsYour phone saves the phone numbers of the 10 most recent calls you’ve answered, if the caller’s number was available.1Press 2 2.2Scroll to the number you want to see information about.3To dial the number, press ; for other options, press (see “Options in call lists” on page 33).Missed callsYour phone saves the numbers and names (if available) of the last 10 callers that have tried unsuccessfully to reach you. The display tells you how many calls were missed. If the caller’s name and number are stored in memory, that information appears.++8890ug.book Page 32 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 33 ]Phone bookAfter missing a call1Press .If you have missed more than one call, you can scroll through the list of numbers. 2To dial the displayed number, press . For other options, press . (See “Options in call lists” below for more information.) To exit, press .At any time1Press 2 1.2Scroll to the number you want to see information about.3To dial the number, press . For other options, press (see “Options in call lists” below).Options in call listsWhen you view the missed calls, received calls, or dialed calls list and press , a list of options appears on your phone’s screen. shows the date and time of the last call. Use the scroll keys to scroll through up to five recent call dates/times for the displayed phone number. allows you to edit the displayed number and save it with a name to your phone book. allows you to enter a name for the number and save both to your phone book. erases the number from the call list. displays the phone number if the associated name is currently displayed.8890ug.book Page 33 Tuesday, November 30, 1999 3:39 PM
[ 34 ] 8890 User Guide v8 11/30/99Clearing call listsThis feature clears all the missed, received, and dialed call lists.1Press 2 4.2Scroll to , , , or , then press .Note: Missed, Received, and Dialed calls lists are also erased when you change the phone security setting (see “Security features” on page 69) or when you use a SIM card that is not one of the five most previous cards used with the phone.8890ug.book Page 34 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 35 ]Voice Mail++8. Voice Mail++Voice Mail is a network feature that enables those who call you to leave a voice message.Note: You can use Voice Mail with either one or two phone lines.When you receive a voice message, your phone lets you know by beeping, displaying an icon on the screen, or showing a text message. The method of notification depends upon your carrier. Additionally, if you receive more than one Voice Mail message, your phone might display the number of messages that you have received. Finally, if you have subscribed to two different phone lines, the message would indicate to which line the message is intended.However, even though your phone notifies you of a message, the Voice Mail feature is independent of your phone’s software. To use Voice Mail, you must have:•a voice mail subscription•a voice mailbox number•a temporary passwordThese items are provided by your Service Provider. Additionally, your Service Provider should tell you how to record a greeting for your voice mailbox and how to change the temporary password.After you obtain this information from your Service Provider, you must then save the voice mailbox number given to you to your phone. Refer to “Saving the Voice Mailbox Number” on page 36.After you have saved your voice mailbox number, refer to “Listening to Your Voice Messages” on page 36.Note: If you have difficulty using the Voice Mail feature, contact your Service Provider.8890ug.book Page 35 Tuesday, November 30, 1999 3:39 PM
[ 36 ] 8890 User Guide v8 11/30/99•Saving the Voice Mailbox Number1Press 1 9 2.2Enter your voice mailbox number, then press .Note: This number can be up to 32 digits long.Working with Two Phone LinesIf your particular SIM card supports it, this phone can have two phone lines. Your Service Provider can let you know if your SIM card allows the use of this feature and give you access to the use of two phone lines.If you decide to use two phone lines, you can select one of the two lines for outgoing calls, but you can still answer calls on both lines.If you use two phone lines, you will be given a voice mailbox number for each line. You need to save each phone line’s voice mailbox number separately.To do this, first select the outgoing line and save its voice mailbox number. Then, select the outgoing line and save its number.•Listening to Your Voice MessagesYou can call your voice mailbox using any of the following methods:•if there’s a notification message on your screen and appears at the bottom, you can press to call your voice mailbox•if you’ve saved your voice mailbox number in your phone, press and holding to call your voice mailbox. •call your voice mailbox number as you would any other telephone number, then follow the directions provided.8890ug.book Page 36 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 37 ]Profiles9. ProfilesThe Profiles feature lets you adjust and customize the phone’s ringing tones for different events, environments, and caller groups. There are five profiles available:•Normal•Silent•Meeting•Outdoor•PagerNormal is the default setting, but it is easy to switch to another profile.Note: Two additional profiles, Car and Headset, appear only after these accessories are connected to the phone for the first time.•Selecting profiles1Press 3.2Scroll to the profile you want.3Press . is highlighted.4Press .ORTo access the profiles directly, press and release power until the desired profile is highlighted, then press .For example, to keep your phone from ringing, select the profile. If you want your phone to ring loudly, select the profile.Note: You can customize the profiles and even rename all of them, except Normal, Car, or Headset. See “Customizing your phone” on page 61 for more information.8890ug.book Page 37 Tuesday, November 30, 1999 3:39 PM
[ 38 ] 8890 User Guide v8 11/30/9910.Advanced calling features•Active call optionsCall waiting++This network service lets you receive an incoming call when you’re already in a call. (Contact your service provider for availability.) The phone beeps to let you know of the incoming call. Activating/canceling call waiting1Press 4 4 5.2Scroll to or .3Press .Confirming call waiting status1Press 4 4 6.2Press .3Scroll to and press .The display shows . Scroll to check the status of other features such as fax or asynchronous data services.8890ug.book Page 38 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 39 ]Advanced calling featuresAnswering a waiting call1Your phone signals when you have a call waiting.2Press to put the current call on hold and answer the waiting call.ORPress , then press .Rejecting a waiting callYou can just let the phone ring, or follow the steps below.•Press ,OR1Press and scroll to 2Press .Switching between calls•Press or .The icon represents the active call and the icon represents the call on hold.Ending the active call1Press .2The held call becomes active.OR1Press and scroll to .2Press .8890ug.book Page 39 Tuesday, November 30, 1999 3:39 PM
[ 40 ] 8890 User Guide v8 11/30/99Third call waitingIf you have both an active and a held call and a third call is waiting, choose one of the following options.Dropping an active call to answer the waiting call•Press .The held call is unaffected.Ending the active call and held call to answer the waiting call1Press .2Scroll to .3Press .Using the in-call menuDuring a call, press to see the in-call menu. Your choices are:Choice What it doesHold or Unhold Hold or release a callNew call Make a call when you have a call in progressTouch tones Send touch tonesEnd all calls End all callsNames Use your phone bookMenu Use the menuMute Mute a call8890ug.book Page 40 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 41 ]Advanced calling featuresPutting a call on hold1To put a call on hold, press .2To return to the call, press .Making a new call1Enter the second phone number, or recall it from the phone book.2Press .OR1Press .2Scroll to , then press .3Enter the second phone number, or recall it from the phone book.4Press .With either method, the first call is automatically put on hold.Switching between two calls in progress•Press or .The icon represents the active call and the icon represents the call on hold.Ending the active call•Press .The held call becomes the active call.Sending touch tonesWhen you press the keys during a call, your phone generates sounds known as touch tones. Use touch tones to access many automated, over-the-phone services such as voice mail, checking airline arrival/departure times, and bank balances.Note: You must be on an active call to send touch tones.8890ug.book Page 41 Tuesday, November 30, 1999 3:39 PM
[ 42 ] 8890 User Guide v8 11/30/99Setting touch-tone length1Press 45 5.2Scroll to (1/10 second) or (1/2 second)3Press .Saving touch tone stringsUse touch tone strings for sending and receiving information with your phone. For example, you can save your office voice mailbox number along with your password for easy access to your messages.Store touch tone strings the same way you save phone numbers (see “Saving names and numbers” on page 28).For frequently used strings of numbers, you can save an entire digit sequence in your phone book and send it as a touch tone string.Sending a touch tone string1Press .2Scroll to and press .3Enter a touch tone string or recall a touch tone string from the phone book and press .Ending all calls1Press .2Scroll to , then press .Accessing the phone bookThis option appears in the menu as .1Press .2Scroll to and press . Now all your phone book functions are available. See “Phone book” on page 28 for details.8890ug.book Page 42 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 43 ]Advanced calling featuresAccessing menusScroll to and press to access any of your phone’s menus.Muting/unmuting the microphoneYou can mute and unmute your phone’s microphone while a call is in progress. The difference between mute and hold is that mute lets you hear the other caller.1Press .2Scroll to , then press .3To unmute the microphone, press .Muting and unmuting also affects the microphones of any accessories connected to the phone.Conference calls++This network service allows you to make conference calls with your phone. Check with your service provider for details.Make a conference call1Make a normal call to the first person.2Press and scroll to New call.3Press , recall or dial the number of the next party you want to conference in, then press .4After the other party answers, press .5Scroll to , then press .6To add other parties to the call, repeat steps 2-5.7To end the conference call, press .8890ug.book Page 43 Tuesday, November 30, 1999 3:39 PM
[ 44 ] 8890 User Guide v8 11/30/99Having a private conversation with a participant1While in a conference call, press .2Scroll to , then press .A list of the participants appears.3Scroll to the person you want to speak with, then press .The other participants can continue talking with each other.4To rejoin the conference call, press .5Scroll to , then press .Drop a participant from the conference call1While in a conference call, press .2Scroll to , then press .A list of the participants appears.3Scroll to the person you want to drop, then press .The other participants can continue talking with each other.4Press .5Scroll to , then press .Transferring a call++When you have one active and one held call, you can connect the two calls and disconnect yourself from the call. Note: Your network and SIM card must support this feature•During a call, press , scroll to , then press .8890ug.book Page 44 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 45 ]Advanced calling features•Call forwarding++This network service lets you forward your incoming calls to another phone number.Note: If you have subscribed to a second phone line, call forwarding works separately for each line. Make sure you have selected the line you want before you set up any call forwarding. The following icons appear on your phone’s screen: Incoming voice calls are being forwarded to another number. You have forwarded all voice calls that are received on line 1.You have forwarded all voice calls that are received on line 2.You have forwarded all voice calls that are received on lines 1 and 2.Activating call forwarding1Press 5.Scroll to one of the following options:51 (Forwards all voice calls without ringing)52 53 54 55 Combines the previous three types, and lets you choose a delay time between 5 and 30 seconds.56 57 8890ug.book Page 45 Tuesday, November 30, 1999 3:39 PM
[ 46 ] 8890 User Guide v8 11/30/992Press .3 is highlighted; press .4Select ORSelect .5If you choose , enter the phone number to which you want to forward calls, then press . You can press to see if you entered the phone number correctly.Canceling call forwarding1Press 5 1.2Scroll to Cancel and press OKNote: Canceling all call forwarding may also cancel any automatic forwarding of calls to voice mail that your service provider has activated for you. Also, this option may cancel your call forwarding service. Contact your service provider for details.Call forwarding status1Press 5.2Scroll to the call forwarding option you want to check.3Scroll to , then press .Note: Status is not available for .You can press to see which phone number the calls are being forwarded to.8890ug.book Page 46 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 47 ]Advanced calling features•Automatic redialThis feature redials the number you’re trying to call up to 10 times.Note: Automatic redial will not work while you initiate or answer another call.Activating automatic redial1Press 4 4 1.2Scroll to , then press .3Press and hold to return to the start screen.If the number you dial is busy, your phone immediately redials the number. If it is still busy, your phone will redial the number up to nine more times.•Calling cardYou can store two calling card numbers in your phone’s memory.Saving calling card information1Press 4 4 2.2Scroll to the calling card information you want to change, then press .3Scroll to , then press .4Enter your security code, then press .5At , press . Scroll to the dialing sequence your card uses (see chart below) then press .8890ug.book Page 47 Tuesday, November 30, 1999 3:39 PM
[ 48 ] 8890 User Guide v8 11/30/99.Note: The order of the following steps may vary, depending on which dialing sequence your card uses.1Enter the access number (usually the 1-800 number listed on the back of the calling card), then press .2Enter the card number and/or PIN, then press . 3Your phone displays Press .4Scroll to and press . 5Enter the card name, then press .Choosing a calling card1Press 4 4 2.2Scroll to the card you want to use, then press .3 is highlighted; press .4Enter your security code, then press .Dialing sequence Use for cardsthat require you to: Cards usingthis sequenceAccess no.+ Phone no.+ card no.Dial 1-800 access number, then phone number, then card number (+ PIN if required)MCI, AT&T True Choice, Sprint Canada, UnitelAccess no.+ card no.+ phone no.Dial 1-800 access number, then card number (+ PIN if required), then phone numbernetworkMCI, WorldPhone MCIPrefix+ phone no.+ card no.Dial the prefix (any numbers that must precede the phone number) and phone number you want to dial, then card number (then PIN, if required)GTE, PacBell, AT&T, Stentor8890ug.book Page 48 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 49 ]Advanced calling featuresMaking a calling card call1Enter the phone number, including any prefix (such as 0 or 1) that your calling card may require. See your calling card for instructions.2Press and hold until your phone displays .3Your phone displays . Wait for the tone, then press .4Your phone displays . Wait for the tone, then press .This procedure may not work with all calling cards. Follow the directions on the back of your calling card or contact your long distance company for more information.•Using voice dialingYour phone’s voice dialing feature let’s you dial a number using your voice. Before you can begin using this feature, you need to create entries in the phone book so you can associate a "voice tag" with the name you wish to dial.Adding a voice tag to a phone book entryTo create entires in the phone book, see “Saving names and numbers” on page 28. By this time you should be familiar wirh the phone book. If not see “Phone book” on page 28.1At the Start screen, scroll to the name you want to give a voice tag.2Press , then , and scroll to . 3Press . The phone displays .4Press then speak clearly into the microphone.Note: DO NOT press when you’re done. 8890ug.book Page 49 Tuesday, November 30, 1999 3:39 PM
[ 50 ] 8890 User Guide v8 11/30/995The phone automatically stops recording then saves and replays the voice tag.If recording is not successful, your phone asks if you want to try again. Press to try again or to exit.Warning: Do not rely only on voice tag for dialing emergency numbers. In emergencies, stress causes changes in your voice, which may keep the phone from recognizing the command. Notes about voice tags•Voice tags are not language dependent; any clearly spoken word or phrase can serve as a voice tag.•It’s easier for the phone to differentiate between long, unique voice tags. For example you might want to record a person’s first and last names rather than their first name.•Voice tags must be no longer than 2 seconds.•Voice tags are sensitive to background noise. Record and use them in a quiet environment.•If you delete a name, any associated voice tag is also deleted.•The recording process stops automatically; pressing aborts the recording attempt.Making a call using voice recognition1Press and hold . You hear several beeps, and appears.Note: If you have the optional headset attached, press and hold the headset button.2Pronounce the voice tag clearly into the microphone. appears. When the phone finds the voice tag, appears, and the phone automatically dials the number.If the phone does not locate a number, 8890ug.book Page 50 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 51 ]Advanced calling features appears. Press to try again or to cancel and return to the start screen.Playing back a voice tag1Press and scroll to .2Press , then scroll to the name with the voice tag you want to hear.3Press , select , and press .Changing a voice tag1Press and scroll to .2Press , then scroll to the name with the voice tag you want to change.3Press , scroll to and press .4The phone displays .5Press .Note: Refer to “Notes about voice tags” on page 50.6The phone repeats your voice tag, and appears.Erasing a voice tag1Press and scroll to .2Press , then scroll to the name with the voice tag you want to change.3Press , scroll to and press . appears. 4Press to erase the voice tag.8890ug.book Page 51 Tuesday, November 30, 1999 3:39 PM
[ 52 ] 8890 User Guide v8 11/30/99•1-Touch DialingAssign a name and number to a 1-touch dial location so that when you press this key, the associated number automatically dials.Note: The first nine numbers stored in SIM memory are automatically stored in keys 1 - 9 as one touch dial numbers. You can assign new numbers to the keys, but the names and numbers must be already stored in the phone book. Refer to “Phone book” on page 28 for more information.Key 1 can be set up to access your voice mail. Check with your service provider for details. Also, Key 9 can be setup to dial emergency numbers such as 911. Assigning a number to a 1-Touch Dial key 1Press and scroll to .2Press .3Scroll to the first number that shows the message and press . A list of names appears.4Scroll to the phone book entry you want to assign to this key, press , and appears. Now you can edit the number if needed.Calling a 1-touch dial numberPress and hold the appropriate key, or press the key then press . The phone dials the number.1-touch dialing for key 1If your phone is set up for voice mail, you can press and hold and your phone dials voice mail. If you assign a 1-touch number to key 1, press then press . The phone dials the 1-touch number.8890ug.book Page 52 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 53 ]Advanced calling featuresChanging 1-Touch Dialing Numbers1Press 2Scroll to and press . 3Scroll to the key that you want to change and press .4Scroll to and press . A list of names appears.5Scroll to the new name you want to assign to this key and press .Erasing 1-Touch Dialing Numbers1Press 2Scroll to and press .3Scroll to the key that you want to erase and press .4Scroll to and press .5Press to confirm.8890ug.book Page 53 Tuesday, November 30, 1999 3:39 PM
[ 54 ] 8890 User Guide v8 11/30/99•Making an international call1Enter the + character (by pressing the key twice), country code, area code, and phone number.2Press .•Using the phone bookPhone Book MenusBegin at the Start Screen and press . From here, scroll through the menus to select a particular menu or option. Search for a specific name.Enter a new name and number.Erase names/numbers. You can choose to erase individual names/numbers, or you can erase all information at one time.Copy names/numbers between your phone and SIM card.Choose the memory source (SIM card or internal), phone book view, and show the memory status.Assign up to nine 1-touch dial locations. Refer to “1-Touch Dialing” on page 52 for more information.Program voice activated dialingRename or change the ringing tone for a caller group.8890ug.book Page 54 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 55 ]Advanced calling features•Caller groupsYou can create groups of names in your phone book, and give each group a different ringing tone. When someone from that group calls, you’ll know because of the ringing tone.Add names to a caller groupThe name you add to a caller group must first be stored in the phone book.1From the Start Screen, scroll to the name or number you want.2Press then press .3Scroll to and press .4Scroll to the group you want to give this name to and press .Removing names from a caller group1Follow steps 1-3 above.2Scroll to and press .Assigning a ringing tone to a caller group1From the start screen, press .2Scroll to . Press .3Scroll to the group you want. Press .4Scroll to and press . 5Scroll to the tone you want to hear when anyone from this group calls you and press .Tip: You can set your phone to ring only when people from certain caller groups call you, and to be silent for all other call groups. See the “Caller group” description under “Ringing options” on page 62.8890ug.book Page 55 Tuesday, November 30, 1999 3:39 PM
[ 56 ] 8890 User Guide v8 11/30/99Renaming a caller groupYou can rename any call group with a name of your own.1Follow steps 1-3 above.2Scroll to . Press .3Enter the group name, then press .Group graphicsEach caller group has a graphic (picture) associated with it. When you get a call from someone whom you have assigned to a caller group, the graphic associated with that group flashes on the screen.To turn the graphic on for a caller group:1Press , scroll to , and press . 2Scroll to the name of the group and press . 3Scroll to and press . Note: To see the group graphic before you select it, scroll to and press . Press to return to the menu. 4Scroll to and press .To turn the graphic off, follow the steps above, but scroll to in the last step.Sending the graphic to someone else:1Follow steps 1-3 above.2Scroll to . Enter the phone number or scroll to find it in your phone book, then press .For more details on the command, see page 100.8890ug.book Page 56 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 57 ]Advanced calling featuresViewing a received graphic1When you receive a graphic from someone else, appears.2Press and then choose to see the graphic, to save it (you must choose which caller group gets the new graphic), or to discard it.•Call timersThe phone automatically tracks the amount of time you’ve spent on calls.If you have two phone linesIf you have subscribed to a second phone line (see “Working with Two Phone Lines” on page 36), call timers are separate for each of your phone lines. When you view call timers, the call timers that are shown are for the currently selected outgoing line. However, if you view call timers while you are in a call, the call timers that are shown are for the line you are using at that moment.Viewing the call duraton1Press 2 5.1Scroll to , , or .Resetting call timers to 01Press 2 5.2Scroll to , then press .3Enter your security code, then press again.8890ug.book Page 57 Tuesday, November 30, 1999 3:39 PM
[ 58 ] 8890 User Guide v8 11/30/99Showing call timer during calls1Press 2 5.2Scroll to , then press .3 is displayed; press .4Scroll to , then press .During a call, the amount of time spent in that call is displayed.Note: The actual time invoiced for calls by your service provider may vary, depending upon network features, rounding-off for billing, and so forth.•Using call cost limitsThis feature helps you limit the amount of money you spend on your mobile phone bills. When the limit you set is reached, no calls can be made except for emergency calls.Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding-off for billing, and so forth.Setting a call cost limit1Press 2 7 1.2Enter your PIN2 code (see “PIN and PUK codes” on page 70), then press .3Scroll to , then press .4Enter the number of charging units or dollars, then press .Tip: Press # to insert a decimal point.The number of remaining units is shown when the screen is clear.8890ug.book Page 58 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 59 ]Advanced calling featuresRemoving a call cost limit1Follow steps 1 and 2 above.2Scroll to , then press .•Showing call costs++This network service allows you to check the cost of the last or current call, or the total cost of all calls that you have made or received since the counters were last reset. To choose whether call costs are shown in charging units or in dollars, see "Show costs in" below.Note: The actual invoice for calls and services from your service provider may vary, depending upon network features, taxes and so forth.Viewing call costs1Press 2 6.2Scroll to (cost of last call, or current call if applicable) or (cost of all calls since counters were last reset).Clearing call cost counters1Press 2 6.2Scroll to , then press .3Enter your PIN2 code, then press .8890ug.book Page 59 Tuesday, November 30, 1999 3:39 PM
[ 60 ] 8890 User Guide v8 11/30/99•Showing costs in++This feature allows you to choose whether you want to show call costs and set call cost limits in charging units or in dollars. (If you choose charging units, contact your wireless service provider for information about the cost of a charging unit.) This feature appears only if supported by your operator and SIM card.1Press 2 7 2.2Scroll to or , then press .3If you selected :•Enter the unit price, then press . •Enter the currency name, then press .4If you chose , call costs and call cost limits are measured in charging units as agreed to by your service provider.8890ug.book Page 60 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 61 ]Customizing your phone11. Customizing your phone•ProfilesProfiles let you set your phone’s sound settings to whatever environment you find yourself in, whether it’s a meeting or a soccer game. Each profile contains settings for your phone’s ringing option, ringing tone, ringing volume, vibrating alert, message alert tone, keypad tones, and warning and game tones. Just pick the profile that suits your current environment: Normal, Silent, Outdoor, Meeting, or Pager.Note: The Car and Headset profiles do nto appear until you attach these accessories for the first time.You can modify the settings in each profile, and (except for the Normal, Car and Headset profiles) you can rename them.Selecting a profile1Press Menu 3.2Scroll to the profile you want to use.For Example, 3Press .Customizing the profile1Press 3.2Scroll to the profile you want to customize.For example, .3Press .8890ug.book Page 61 Tuesday, November 30, 1999 3:39 PM
[ 62 ] 8890 User Guide v8 11/30/994Scroll to , then press .The customize options appear.Ringing optionsChoose how a profile notifies you of an incoming call.1Scroll to one of the following, and press .: The phone rings.: The ringing volume starts low and increases with successive rings.: The phone rings once.:The phone makes a short beep.: Sets the phone to ring only if the call is from a person who belongs to the selected group(s). Scroll to the group(s) you want and press to select or to deselect them.: The phone sounds no tone. Keypad tones, warning tones, and message alert tones are turned off, and the icon appears at the top of the screen.2Press , then to save or to ignore the changes. Ringing toneYour phone comes programmed with 35 ringing tones. Also, there are slots available for downloading up to five more ringing tones. 1Press 3.2Scroll to the profile you want to set the ringing tones for, and press .3Highlight and press . 4Scroll to , then press .Ringing optionRinging toneRinging volumeVibrating alertMessage alert toneKeypad tonesWarning and game tonesAutomatic answerLightsProfile =8890ug.book Page 62 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 63 ]Customizing your phone5Scroll to the tone you want, then pause to hear a sample of the tone.6Press to select the tone or continue scrolling to select a different tone.Ringing volumeThis feature sets the ringing volume for incoming voice calls and message alert tones.1Press 3.2Scroll to the profile whose ringing volume you want to set, then press .3Scroll to , then press .4Scroll to , then press .5Scroll to the volume level you wish to use, then pause to hear a sample of the volume.6Press to select the volume or continue scrolling to select a different volume.Note: If you select Level 5, you see a note stating. Press to confirm the setting.Also when you select level 5, the phone starts ringing at Level 4, then ascends to Level 5.Vibrating alertYour phone has an internal vibrating mechanism. No special battery is needed to make the phone vibrate when someone calls you.1Press 3.2Scroll to the profile you want to set the vibrating alert for, and press .3Highlight and press . Scroll to , then press .8890ug.book Page 63 Tuesday, November 30, 1999 3:39 PM
[ 64 ] 8890 User Guide v8 11/30/994Scroll to or and press . If you choose , your phone vibrates even if you have set (see page 62) to .Message alert toneThis option sets the tone your phone makes when you get a text message.1Press 3.2Scroll to the profile whose message alert tone you want to set, then press .3Scroll to , then press .4Scroll to , then press .5Scroll through the tones until you hear one you like, then press .Keypad tonesThis option sets the volume of the tone you hear when you press the phone’s keys.1Press 3.2Scroll to the profile whose keypad tones you want to set, then press .3Scroll to , then press .4Scroll to , then press . 5Scroll through the choices until you hear the level you want, then press .Warning and game tonesWarning tones are sounds your phone makes for conditions such as errors, confirmations, power on, battery low, and recharge battery. Game tones sound while you are playing one of the phone’s games. 1Press 3.2Scroll to the profile you want to set the warning tones for, then press .8890ug.book Page 64 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 65 ]Customizing your phone3Scroll to and press . Scroll to , then press .4Scroll to or , then press .Rename a profile1Press 3.2Scroll to the profile you want to rename. (Remember, you cannot rename the Normal, Car, or Headset profiles) and press .3Scroll to and press .4Enter the new profile name, then press .Accessory profilesHeadset and Car profilesWhen you connect your phone to an approved headset or car kit, the phone automatically selects the or profile. These prpofiles do not appear in the phone’s menu until you connect the accessory. Also, you cannot choose a different profile while these accessories are connected.Note: When you connect the phone to a Headset or a Car Kit, the sliding cover is deactivated. Use , , , or to answer, end, or reject calls.Your phone remembers any changes you make to the sound settings while the headset or car kit is connected, and uses them again the next time you use that accessory.Automatic answerThis profile lets your phone answer incoming calls after just one ring.Note: This profile is available only when your phone is connected to a headset or to an approved car kit.This feature does not function with data calls. 8890ug.book Page 65 Tuesday, November 30, 1999 3:39 PM
[ 66 ] 8890 User Guide v8 11/30/991Press 3.2Scroll to or , then press .3Choose and press . Scroll to , then press .4Scroll to and pres .Car profileIf you are using your phone with an approved car kit, you can set lights to (lights stay on) or (after 15 seconds, lights turn off until the next key is pressed, phone rings, etc.). •Restore factory settingsYou can use 4 5 7 to reset some of the phone settings to their original values. You must enter the security code.Note: Restoring factory settings does not erase your phone book. However, it does erase all customized settings you may have entered.•Display languageYou can choose your phone’s display language.1Press 4 5 1.2Scroll to the language you want, then press .8890ug.book Page 66 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 67 ]Customizing your phone•ClockYour phone has an internal clock that can be displayed on the start screen. It also features an alarm clock (see “Alarm clock” on page 94).Setting the clock1Press 4 2 2.2Enter the current time, using two digits for both hours and minutes. OREnter hours and minutes in 24-hour format.3Press .4Select or and press .Note: If you entered the time in the 24-hour format, and do not appear.If this is the first time you have set the clock, the phone asks you to enter the date. Enter the date in format and press .Selecting the time format1Press 4 2 3.2Scroll to , then press .3Scroll to or .4Press .Displaying the clockThis feature lets you continuously display the time on the start screen.1Press 4 2 1.2Scroll to or (only one choice appears, depending on the current setting).3Press .8890ug.book Page 67 Tuesday, November 30, 1999 3:39 PM
[ 68 ] 8890 User Guide v8 11/30/99Automatic update of date and time++If this feature is supported by your wireless service provider, it automatically updates the clock in your phone in accordance with the current time zone. Press 4 3 and choose: updates the date and time automatically. requires you to confirm that you want the update. prevents the date and time from being automatically updated.8890ug.book Page 68 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 69 ]Security features12.Security features•Locking the keypad (Keyguard)The keypad lock (Keyguard) disables your keypad to prevent accidental key presses (for example, when your phone is in your pocket or purse).Note: Keyguard does not prevent unauthorized use of your phone.Locking/unlocking the keys using the sliding cover•Close the sliding cover, then press .•To unlock the keys, open the sliding cover.•To unlock the keys, but leave the sliding cover closed, press and then press .Locking/unlocking the keys with the sliding cover open•To lock the keys, press then .•To unlock the keys, press then .Note: Connecting your phone to a car kit automatically disables Keyguard.8890ug.book Page 69 Tuesday, November 30, 1999 3:39 PM
[ 70 ] 8890 User Guide v8 11/30/99•PIN and PUK codesThe following table provides a summary of how different types of security codes are used in your phone.Code Purpose For more informationSecurity code Required by several phone features. If phone security is on, the phone requests the security code the first time you use it after installing a new SIM card.See entries for call timers, calling card, phone book, and phone security.PIN code If SIM card security is on, the phone requests the PIN code every time the phone is turned on.See “PIN and PUK codes” on page 70.PIN2 code Required by several phone features. See entries for show call costs, call cost limit, fixed dialing, and PIN and PIN2 codes.System password Required by the Restrict Calls feature. See “Restricting calls++” on page 74.8890ug.book Page 70 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 71 ]Security featuresPIN codesThe PIN (Personal Identity Number) and PIN2 codes are 4- to 8-digit numbers that usually come from your service provider along with the SIM card. Use the PIN code to protect your phone and SIM card against unauthorized use. The PIN2 code activates some of your phone’s functions, such as Call Cost Limit (See “Using call cost limits” on page 58). When the phone requires the PIN or PIN2 code, it displays or . Enter the code then press Changing your PIN or PIN2 codesYou can change your PIN or PIN2 codes to any 4- to 8-digit number.1Press 4 6 5, then press .2Enter the current PIN code and press .3Enter the new PIN code and press 4Enter the new PIN code again to verify, and press Note: If you make a mistake while entering the code, appears. Start again at Step 2 and be careful to enter the correct code. If you enter the wrong code three times in a row, the PIN code is blocked. To unblock the PIN code, see “PUK codes” on page 72."SIM card securityThis feature sets your phone to ask for the PIN code each time the phone is switched on and prevents unauthorized use of your phone. 1Press 4 6 1.1Enter the PIN code supplied by your service provider, and press .1Press (up or down) to highlight and press .To turn off this feature, repeat steps 1-3 above, but highlight in Step 3.8890ug.book Page 71 Tuesday, November 30, 1999 3:39 PM
[ 72 ] 8890 User Guide v8 11/30/99Note: If you enter the wrong PIN or PIN2 code three times in a row, the SIM card is automatically blocked or you cannot activate the function. See "Working with PUK codes" below to unblock the codes.PUK codesThe PUK (Personal Unblocking Key) and PUK2 codes are 4- to 8-digit codes that also usually come from your service provider along with the SIM card. The PUK code unblocks a blocked PIN code, and the PUK2 code unblocks a blocked PIN2 code.Unblocking a PIN code1Press 4 6 5, then press .Change PIN code appears. To unblock the PIN2 code, press (down) to select F2Press . appears.3Enter the PUK code, then press .Note: If you enter a wrong PUK code ten times in a row, the SIM card becomes invalid and you must contact your service provider for a new card.4Enter the new PIN code, then press .5Enter the new PIN code again to verify, and press Note: You cannot change the PUK or PUK2 code, so keep a record of them in a safe place. If you lose it, contact your service provider.If you try to change the PIN2 code, and you enter a wrong PUK2 code ten times in succession, you can’t use functions requiring the PIN2 code. Contact your service provider for a new card.8890ug.book Page 72 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 73 ]Security features•Security codeYou need the security code to access some security features. When the phone requires the security code, it displays . Enter the code then press .If you enter an incorrect security code five times in a row, the phone will not accept the correct code for the next five minutes.This code comes with your phone. The default security code is 12345. To change the security code:1Press 4 6 5, then press select.2Scroll to and press .3Enter the current security code, then press .4Enter the new security code, then press .5Enter the security code again to verify, then press .Keep the code secret and in a safe place, separate from the phone.•Fixed dialingIf supported by your SIM card, this feature lets you restrict your outgoing calls to phone numbers included in the fixed dialing list or beginning with the same digit(s) as an entry in the list.Remember, If you turn fixed dialing on and don’t have any numbers in the fixed dialing list, you can’t make any calls!Note: When fixed dialing is set to on, calls may be possible to certain emergency numbers in some networks (such as 911 or other official emergency numbers).8890ug.book Page 73 Tuesday, November 30, 1999 3:39 PM
[ 74 ] 8890 User Guide v8 11/30/99Turning fixed dialing on or off1Press 4 6 4.2Scroll to or , then press .3Enter your PIN2 code, then press .Adding numbers to the fixed dialing list1Press 4 6 4.2Scroll to , then press .3Scroll to , then press .4Enter your PIN2 code and press .5Enter a name to go with the restricted phone number, then press .6Enter the phone number you want to restrict, then press . Repeat steps 3-6 for each number you want to add to the list.•Restricting calls++This is a network service that lets you restrict the calls your phone can make and receive. Check with your service provider for details.Note: When calls are restricted, calls may be possible to certain emergency numbers in some networks (e.g. 911 or other official emergency number).Turning on call restrictions1Press 4 6 3.2Scroll through the types of calls you can restrict, and press when you see the one you want:: Calls cannot be made.8890ug.book Page 74 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 75 ]Security features: Calls cannot be made to foreign countries.: When abroad, calls can be made only within the current country and to your home country, i.e. the country where your home network operator is located.: Calls cannot be received.: Calls cannot be received outside your home area.: Turns off all call restrictions. Calls can be made and received in a normal way.Note: If you selected , the following steps are not available.Also, you can cancel call restrictions on each option, allowing restrictions on other opitons to stay in force.3Scroll to one of the following options:: Enter the restriction password and press .: Enter the restriction password and press .: The phone lists the call types with call restriction active.4Press .For more information about your restriction password, see “Restricting calls++” on page 74.•Setting up a closed user group++This network service specifies the group of people to whom you can call and who can call you. resets the phone to use a user group that the SIM card owner has agreed upon with the service provider.8890ug.book Page 75 Tuesday, November 30, 1999 3:39 PM
[ 76 ] 8890 User Guide v8 11/30/99Note: When calls are limited to Closed User Groups, calls may be possible to certain emergency numbers in some networks (e.g. 911 or other official emergency number).8890ug.book Page 76 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 77 ]How to select a system13.How to select a systemYou can select how your phone chooses a wireless network, as there may be more than one available. The selection you make stays active until you change it or change the SIM card.1Press 4 5 4.2Scroll to or . Press .•: the phone automatically selects one of the available systems. •: the phone searches for available systems then lists them. Scroll to the one you want, then press . The phone looks for a network and displays the result. If you lose connection while in mode, the phone asks you to select a network again.8890ug.book Page 77 Tuesday, November 30, 1999 3:39 PM
[ 78 ] 8890 User Guide v8 11/30/9914.Text messages++The text message network service allows you to send short text messages to other phones that have text message capability. You can also ask the service provider to convert the message to other formats such as email and fax. •Setting up text messagingBefore you can send and receive text messages, you must:•have a text message subscription through your service provider•know your text message center number•save your text message center number in your phoneSaving your message center number 1Press .2The menu appears. Press .3Scroll to , then press .4Choose which set of message settings you want to use (the first one is the default), then press .5 appears. Press .6Enter your message center number, then press .8890ug.book Page 78 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 79 ]Text messages++•Writing messagesUsing standard text inputWhen you select this mode, the ABC icon appears as visual confirmation.1Find the key that is below the letter you want to enter.2Press it as many times as needed for the letter to appear on the screen.For example, to enter the name John:Press Press Press Press See “Standard text input” on page 25 for more information.Using predictive text inputPredictive text input is the default mode that allows you to write text using a built-in dictionary. You can also add new words to the dictionary. With predictive text input, you only need to press each number key once for each letter. For example, to write "Nokia" with the English dictionary selected: (for ) (for ) (for ) (for ) (for )Since the displayed word changes after each key stroke, disregard the word until you have keyed in all the characters.The display shows the above words for each key pressed.8890ug.book Page 79 Tuesday, November 30, 1999 3:39 PM
[ 80 ] 8890 User Guide v8 11/30/99Predictive text input tools - Use for word entry. Press each key only once for each letter.Press to view the next matching word if the underlined word is not the word you intended.Press to add a new word to the dictionary. Press once to accept a word and add a space.Press and hold to enter a number. indicates 123 mode.Press to change the character case. indicates upper case. indicates lower case.Press to select predictive mode or standard text mode. and indicate standard text mode. , , and indicate predictive text mode.Press once to delete the character to the left of the cursor.Press once to add a punctuation mark. To change the underlined symbol, press repeatedly until the desired symbol displays.Maximum number of characters available. Appears in the top right corner of the display and counts down for each character added.8890ug.book Page 80 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 81 ]Text messages++Selecting a language and turning on predictive text input1Press , then .2Scroll to , then press .3Press ,scroll to , then press .4Scroll to the language you want, then press . appears.Turning off predictive text input•To switch from predictive text input to traditional text input, repeat steps 1 - 3 above, then select OR•While writing the message, press to switch between predictive text input and standard text input.Writing with predictive text input1Press each key once for each letter. For example, to write “hello” press , , , , .•Do not pay attention to the word on the display until you have completed writing the word.•Refer to the character counter in the top right of the screen. It keeps count of how many characters are available.•Press to delete a character.•Press to change the character case.•Press and hold the respective number key to insert a number.•Press to insert a punctuation mark. If it is not correct, press repeatedly to find the desired punctuation mark.8890ug.book Page 81 Tuesday, November 30, 1999 3:39 PM
[ 82 ] 8890 User Guide v8 11/30/99•To insert a symbol, press and hold . The symbol screen appears. Select the desired symbol and press .2When you have finished writing, check that the underlined word is the word you intended to write.If the word is correct:•Insert a punctuation mark, if needed. Then press to confirm it enter a space, and begin writing the next word.If the word is not correct: •Press repeatedly until the desired word appears, then press to confirm it.OR•Press , scroll to , then press . Scroll to the correct word and press .•Start writing the next word.Note: When you enter a period to end a sentence, the phone switches to mode so the that the first letter in the next word will be uppercase.If the ? character appears after the word:The word you intended to write is not in the dictionary.•To add the word to the dictionary press . See “Adding the desired word to the match list.”Adding the desired word to the match listIf no matches are found in the predictive text input mode, you can add the word to the dictionary.1Press repeatedly until appears in place of . 8890ug.book Page 82 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 83 ]Text messages++2Press and enter the word(s) using standard text input (See “Standard text input” on page 25). 3Press to save the word(s).Insert numbers1To add a number to the message, press and hold until appears. 2Key in the desired numbers, then and press and hold to return to mode.Insert symbols1Press and hold until the symbol screen appears. ORPress and scroll to .2Select the desired symbol and press .Writing compound words1Write the first part of the word and press to accept it. 2Write the last part of the compound word and press to enter the word in memory.Saving messages in the OutboxWhen writing a text message, it’s a good idea to save it in the Outbox. Then if there is a message delivery problem, you can easily resend the message.1While writing the message, press .2Scroll to , then press .Sending the text message1Press 1 3. appears briefly, then the message screen appears.2Enter a message of up to 160 characters. (The number of available 8890ug.book Page 83 Tuesday, November 30, 1999 3:39 PM
[ 84 ] 8890 User Guide v8 11/30/99characters appears in the top right corner of the screen.)3Once you are finished writing, press , scroll to , then press .4Enter or recall the recipient’s phone number, then press . appears5When the message is successfully sent, appears.Note: If you need to exit while writing the message, press anytime. Later, press 1 3 to return and finish writing the message. However, if you turn off the phone without saving the message, the message will be lost.•Resending a message from the OutboxMessages in the Outbox have one of two icons in front of them. The icon in front of a message heading shows that you have attempted to send the message to the text message center. The icon shows that you have not yet tried to send the message.1Scroll to the message, then press .2Press .3Scroll to and press .4Press Options. Send appears already highlighted.5Press to send the message.8890ug.book Page 84 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 85 ]Text messages++•Reading text messagesReading new text messages nowWhen you receive a text message, the phone displays the indicator, and makes a sound (depending on the “Message alert tone”; see page 64).•To read the message, press . This takes you to the Inbox, with the new message selected. Press again to read the message.Reading new text messages later1Press 1 1 1.A list of message headers is displayed. The icon in front of the header indicates that a message has been read. The icon indicates that a message has not yet been read.2Scroll to the message you want, then press .3If the message is long, use the scroll keys to scroll through the message.The message text is followed by the sender’s name or phone number, and reception date and time•Erasing a message1While reading the message, press .2Scroll to , then press .3Your phone asks you to confirm that you want to erase the message. Press .8890ug.book Page 85 Tuesday, November 30, 1999 3:39 PM
[ 86 ] 8890 User Guide v8 11/30/99•Replying to a message1Press .2Scroll to , then press .3Enter your message, then press .4Scroll to , then press .5The phone displays the return number. Edit the number if needed, then press .•Forwarding a message1Press .2Scroll to , then press and the message text appears.3Edit the message if necessary,then press .appears already highlighted.4Press . The box appears. 5Enter the recipient’s phone number, then press .ORPress to recall a stored name and phone number, then press . Press again to confirm.•Retrieving a numberYou can save or dial a phone number that is included in a message.1Press .2Scroll to , then press .3If more than one number is shown, scroll to the one you want, then press .8890ug.book Page 86 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 87 ]Text messages++The phone displays the number on the screen. You can dial it or save it as if you had entered it yourself.•Message settingsYou can specify some of the ways your phone handles text messages. Depending on your SIM card, you can have up to five “sets” of settings—for example, one for e-mail messages, one for pages, one for faxes, etc.Changing settings for some messages1Press 1 5.2Scroll to the set you want to change the settings for, then press .3Scroll to one of these options:: Get this number from your wireless service provider. Enter the message center phone number and press , or press to get the number from your phone book (if it is saved there).: Scroll to , , or , then press . (In order to receive a converted message, the recipient needs to have the appropriate terminal device.): The amount of time that messages should be stored at the message center while the network attempts to deliver them. Choose a time, then press .: Enter a new name for this set of message settings, then press .4Press .8890ug.book Page 87 Tuesday, November 30, 1999 3:39 PM
[ 88 ] 8890 User Guide v8 11/30/99Changing common settings for all messages1Press 1 5.2Scroll to , then press .3Scroll to or , then press .: Scroll to or then press . means that the network tries to send delivery reports for the messages you send. means that the network tries to route the reply to this text message through your own message center.•Message storageThe Inbox and Outbox share a given amount of memory in your SIM card. When this memory is full and there is no more room to store messages, the message indicator blinks. If you are sent a text message when the memory is full, the phone displays the message . You should delete one or more old messages to make room for the new message. The network waits and re-sends the message at a later time.Note: Depending on your SIM card, the Inbox and Outbox can contain a total of up to 50 messages.•Picture messagesUsing Menu 1 4, you can send picture messages with your phone. There are several images included in your phone, and also space for one additional picture. All images can be replaced or deleted.Note: Picture messaging must be supported by your service provider.8890ug.book Page 88 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 89 ]Text messages++Sending picture messages1Press , then .2Scroll to and press .3Scroll to the picture you want to send, then press . The picture appears. To choose a different picture, press , scroll to another picture, then press .4Press and scroll to .5Recall or enter the phone number you want to send the picture message to.Note: The phone number you choose must be able to receive picture messages.6Press .Sending picture messages with text1Press , then .2Scroll to and press .3Scroll to the picture you want to send, then press . The picture appears. To choose a different picture, press , scroll to another picture, then press .4Press . Scroll to and press .5Write a message (up to 120 characters) to go along with the picture, then press .Note: You can use Predictive Text mode or Traditional mode to write the message. See “Using predictive text input” on page 78 for more information.6Scroll to and press .7Enter the phone number you want to send the picture message to and press . appears, followed by .8890ug.book Page 89 Tuesday, November 30, 1999 3:39 PM
[ 90 ] 8890 User Guide v8 11/30/99Note: The phone number you choose must be able to receive picture messages.Receiving picture messages1When your phone displays , press and the message appears. If the picture has a text message with it, scroll up or down to see the entire message.2Press to keep the picture message, or press and to delete it.Other picture message options deletes the picture you select. automatically lets you save any phone number included in the text of the picture message. shows the phone number of the person who sent you that picture message.8890ug.book Page 90 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 91 ]Your Personal Digital Assistant15.Your Personal Digital Assistant•CalendarThe calendar keeps track of reminders, calls you need to make, meetings, and birthdays. It can even sound an alarm when it’s time for you to make a call or go to a meeting.WARNING! Your phone must be switched on to use this function. Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.Starting the calendarPress 8.Entering the dateIf you need to enter the date, follow these steps.1Press , scroll to , and press .2Enter the current month and day in format, then press . (Example: Enter December 31, 1999 as ). appears. Calendar screens8890ug.book Page 91 Tuesday, November 30, 1999 3:39 PM
[ 92 ] 8890 User Guide v8 11/30/99Entering the timeIf needed, enter the time in format or in 24 hour format.Calendar optionsPress 8 to see the current day’s calendar screen. There are seven options available with the Calendar feature.Option 1: View day notesThis option allows you to view, erase, edit, move, and send notes made for the selected day. Use the scroll keys to scroll through notes. Options available while viewing a note are , , (to another date), to send the note, and to copy the note to another compatible phone using the infrared port.Option 2: Make noteWith this option, you can choose from four note types: , , , or . Your phone asks you for more information depending on which one you choose.1Press , scroll to , then press .2Scroll to the desired note type (for example, ) and press .3Key in a subject for the reminder and press .4Enter the date for the reminder in format and press .5When appears, choose or .If you choose •enter the date for the alarm, then press .•Enter the time for the alarm, then press .Calendar screen with note icon8890ug.book Page 92 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 93 ]Your Personal Digital Assistant•Choose or , and press appears briefly, then the current day’s calendar screen appears.If you choose :• then appears briefly, and the current day’s calendar screen appears.When you set calendar notes for the displayed date, the appropriate icon(s) appear in the lower right-hand corner:Option 3: Erase notes1Scroll to and press .2Scroll to , , or , then press . displays each note for the current day so you can delete them individually. Press to delete the note, or press the scroll keys to leave it and view other notes. displays notes in chronological order, with birthdays first, so you can delete them individually. Press to delete the note, or press the scroll keys to leave it and view other notes. allows you to delete all calendar notes at once. The phone asks you to confirm your decision before erasing the notes.Option 4: View all notesThis option lets you scroll through all stored notes. Birthday notes appear first in chronological order, then other notes also in chronological order.Birthday reminderMeeting reminderCall reminderOther reminder8890ug.book Page 93 Tuesday, November 30, 1999 3:39 PM
[ 94 ] 8890 User Guide v8 11/30/99Option 5: Go to dateThis option takes you directly to the specified date instead of scrolling. Enter a date in format, then press .Option 6: Set the dateThis option allows you to set the current date in your phone. Enter the date in format, then press .Sending/receiving calendar notesWhen someone sends you a note, your phone displays . You can save the note in your calendar and work with it in the same way as any other note in your calendar, including setting an alarm.For information on sending calendar notes, see “Sending information via IR” on page 100.Viewing received calendar notesCaution: If you press the calendar note will be deleted!1When your phone displays , press 2 is selected. Press 3Scroll through the note.Saving received calendar notes1After viewing the calendar note, press .2Scroll to , then press 8890ug.book Page 94 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 95 ]Your Personal Digital AssistantDiscarding viewed calendar notesAfter viewing the calendar note, press , then press again.•Alarm clockThe alarm clock feature is based on your phone’s internal clock and sounds an alert at a time you specify. It even works if you switch the phone off!Setting the alarm clock1Press 4 1.2Enter the alarm time in format.3Press .4Select either or and press .The icon appears at the top of the screen as a reminder.Note: Step 4 is necessary only if you have selected am/pm format.Handling the alarm Phone onPress to shut off the alarmOR Press . The alarm stops and sounds again in 5 minutes.Note: If you let the alarm sound for 1 minute without pressing a key, it stops for 5 minutes, then sounds again.Phone offThe phone switches itself on at alarm time, then the alarm sounds. If you press , the phone displays . Press to keep it on or to switch it off.8890ug.book Page 95 Tuesday, November 30, 1999 3:39 PM
[ 96 ] 8890 User Guide v8 11/30/99WARNING! Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.Turning off the alarm clock1Press 4 1.2Scroll to and press .•Business cardsYour phone can send or receive electronic business cards consisting of a name and phone number. You can save received business cards to your phone book.Send a business card1Recall the name from your phone book.2Press , if shown, or skip to Step 3.3Press .4Scroll to .5Press .6Enter or recall the phone number to which you want to send the business card.7Press .Send a business card using IR1Recall the name from your phone book.2Press , if shown, or skip to Step 3.3Press .4Scroll to .8890ug.book Page 96 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 97 ]Your Personal Digital Assistant5Activate the IR port on the receiving phone.6Press .The phone sends the business card through its IR port.Viewing a received business cardWhen you receive a business card, the phone displays .Note: If you press at any time before saving the business card, the business card will be deleted!1When your phone displays , press .2 is selected. Press to read the information.Saving a viewed business card1After viewing the business card, press , scroll to , then press .2At the prompt, edit the name if you want to, then press .3At the prompt, edit the number if you want to, then press .Deleting a viewed business cardAfter viewing the business card, press , then press .8890ug.book Page 97 Tuesday, November 30, 1999 3:39 PM
[ 98 ] 8890 User Guide v8 11/30/99•CalculatorYour phone’s calculator adds, subtracts, multiplies, divides, and converts between currencies.WARNING! Your phone must be switched on to use this function. Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.Using the calculator1Press 7.2Enter the first number in the calculationPress to enter a decimal point and press to erase any mistakes.3To add, press once (+ appears) To subtract, press twice (- appears) To multiply, press three times (∗ appears) To divide, press four times ( / appears) 4Enter the second numberRepeat steps 3 and 4 as needed.5Press . is selected. Press .Currency conversionSetting the exchange rate1Press 7, then press .2Scroll to , then press 8890ug.book Page 98 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 99 ]Your Personal Digital Assistant3Scroll to (to enter the number of domestic units to a foreign unit) or (to enter the number of foreign units to a domestic unit)4Press 5Enter the exchange rate (press # to enter a decimal point)6Press Converting a currency amount1Enter the amount to be converted2Press 3Scroll to to convert to domestic units or to convert to foreign units4Press 8890ug.book Page 99 Tuesday, November 30, 1999 3:39 PM
[ 100 ] 8890 User Guide v8 11/30/9916.Your phone and other devices•Fax and data calls++The phone can send and receive data through the Nokia Cellular Data Suite PC application (network service). For more details, refer to the documentation supplied with your Nokia Cellular Data Suite and communications applications.Make a fax or data call1From the Messages menu, select or and press . allows you to switch from voice mode to data (or fax) mode during a call.2Key in or recall the desired phone number and press .3If you selected in step 1, to switch between voice and data/fax mode during a call, press , select or (or ) and press .4After the transmission, end the call by pressing .Receive a data or fax callYou can answer a data or fax call in the normal way, even when the phone keypad is locked.8890ug.book Page 100 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 101 ]Your phone and other devices•Sending information via IRYou can set up your phone to receive data through its infrared (IR) port. To use an IR connection, the device with which you want to establish a connection must be IrDA compliant.Preparing the devices for infrared connection•The IR ports of the two devices must point at each other.•There must be no obstructions between the two devices.•The two devices must be within two feet of each other.Receiving data via the IR portTo receive data from another compatible phone:1Ensure that the two devices are ready for the IR connection.2Select the Infrared menu to activate the IR port for data reception. 3The user of the sending phone selects the desired function to start data transfer.If data transfer is not started within 45 seconds, the connection is cancelled and will have to be started again. Sending data via the IR portOn a PC provided with an appropriate application, you can: •Send a caller group graphic via IR.•Copy and print names and numbers from the phone book.•Print a text message on a compatible printer.•Send a calendar note via IR.•Print a calendar note on a compatible printer.8890ug.book Page 101 Tuesday, November 30, 1999 3:39 PM
[ 102 ] 8890 User Guide v8 11/30/99Check the status of an IR connectionThe status of an IR connection is indicated by . •When is displayed continuously, there is an IR connection between your phone and the other device.•When blinks, your phone is trying to establish a connection with the other device or a connection has been lost.•When is not displayed, no IR connection exists. •Printing using IRYou can print stored text messages or phone book entries using any printer set up for printing through an IR port.Printing text messages1Press then .2Scroll to where the text message is stored (Inbox or Outbox) and press .3Scroll to the message you want to print and press .4Press and scroll to .5Align the phone’s IR port with the printer’s IR port.Note: Be sure the phone is within 3 feet of the printer’s IR port and that there are no obstructions between the printer’s IR port and the phone’s IR port.6Press . When the message is successfully transmitted to the printer, the phone displays .Printing phone book entries1Recall the name/number you want to print.2Press , then .8890ug.book Page 102 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 103 ]Your phone and other devices3Scroll to .4Align the phone’s IR port with the printer’s IR port.Note: Be sure the phone is within 3 feet of the printer’s IR port and that there are no obstructions between the printer’s IR port and the phone’s IR port.5Press . When the name/number is successfully transmitted to the printer, the phone displays .8890ug.book Page 103 Tuesday, November 30, 1999 3:39 PM
[ 104 ] 8890 User Guide v8 11/30/9917.Fun and games•GamesChallenge yourself or a friend to the four fun games in your phone.WARNING! Your phone must be switched on to use this function. Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.SnakeFeed the snake with as many goodies as possible and watch it grow. Use keys 2, 4, 6, and 8 to turn the snake toward food. The longer the snake’s tail grows, the higher your score. If the snake runs into its own tail or the surrounding wall, the game is over.Starting a 2-player gameSnake can be played as a 2-player game.Before starting a 2-player game, ensure that the IR ports of the two devices are pointing at each other, and that the IR connection is activated. Both players need to start the same game on their phones.LogicFind the secret combination of figures in a column. Possible figures are shown at the top of the screen. Press the 5 key repeatedly to select a figure and the 2, 4, and 8 keys to move the cursor. Once you think you have the right combination, press the key. The result appears as a set of marks above the column. A correct figure in the right place gets a full mark; a correct figure in the wrong place gets a half mark. The game ends when the correct figures are in the right place.8890ug.book Page 104 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 105 ]Fun and games To copy a figure from the previous column, move the cursor over it using the 2, 4, or 8 key, then press the 5 key.MemoryThis is like the old card game in which you lay cards face down on the floor and try to turn up matching pairs.Move the cursor with the 2, 4, 6, and 8 keys. Press the 5 key to reveal a card. Press the # key to jump to the right over revealed cards, or move from the bottom right of the screen to the top left. Press the key to jump to the left over revealed cards, or move from the top left of the screen to the bottom right. Once you match two cards, they remain “turned up.”RotationArrange the numbers in numerical order starting from 1. Rotate the numbers inside the frame counterclockwise with the 1 key and clockwise with the 3 key. Move the frame to another position with keys 2, 4, 6 and 8.•Downloading ringing tones++You can download up to five ringing tones to replace the entries in your list of ringing tones. For details about this network service, contact your wireless service provider.Notification of received ringing toneWhen your phone receives a ringing tone, it displays .Listening to received ringing tonesNote: If you press at any time before saving the ringing tone, the ringing tone will be deleted!8890ug.book Page 105 Tuesday, November 30, 1999 3:39 PM
[ 106 ] 8890 User Guide v8 11/30/991When your phone displays , press .2 is selected. Press .The phone plays the ringing tone.Saving received ringing tones1After listening to the ringing tone, press .2Scroll to , then press .3Choose which ringing tone you want to replace (either an empty place holder, if any are remaining, or a previously downloaded tone), then press .The tone is saved to your list of ringing tones.Discarding received ringing tonesIf you don’t want to save the ringing tone, press without saving it, or scroll to , then press .8890ug.book Page 106 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 107 ]Reference Information18.Reference Information•Using Batteries, Chargers, and AccessoriesThis section provides information about the phone’s batteries, accessories, and chargers. Be apprised that the information in this section is subject to change as the batteries, chargers, and accessories change.This phone is intended for use when supplied with power from an ACP-7U, an ACP-8U, LCH-8, or an LCH-9. Other usage could invalidate any approval given to this apparatus and might be dangerous.Warning! When you purchase batteries, chargers, and accessories for your phone, use only batteries, chargers, and accessories that have received approval from the phone’s manufacturer. The use of any other type of phone-related hardware will invalidate any approval or warranty applying to the phone, and could also be dangerous For availability of approved batteries, chargers, and accessories, check with your dealer.Note: For information on how to charge and recharge your battery, refer to “Charging the Battery” on page 10.When the battery is fully charged, the indicator will tell you that the battery is fully charged.When you are not using a charger, disconnect it from the power source. Do not leave the battery connected to a charger for more than a week, since overcharging could shorten its life span. If left unused, a fully-charged battery will discharge itself over time.Temperature extremes can affect the ability of your battery to charge. Therefore, allow it to cool down or warm up before trying to charge it.8890ug.book Page 107 Tuesday, November 30, 1999 3:39 PM
[ 108 ] 8890 User Guide v8 11/30/99When the battery is running out of power and your phone only has a few minutes of talk time remaining, a warning tone sounds and the message appears briefly. When no more talk time is left, a warning tone is sounded and the phone switches itself off.Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object, like a coin, a clip, or a pen causes a direct connection of the + and - terminals of the battery, which are metal strips on the back of the battery.An example of short-circuiting could occur if you carry a spare battery in your pocket or purse, where the battery could come into contact with such objects like a coin. Short-circuiting could damage either the battery or the connecting object.Leaving the battery in hot or cold places, such as in a closed car in either summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15 C and 25 C (59 F and 77 F).A phone with a hot or cold battery might not work temporarily, even if the battery is fully charged. The performance of Li-Ion batteries is particularly limited in temperatures below 0 C (32 F).The following list provides a guideline that you can follow:•When the operating time (talk time and standby time) is noticeably shorter than normal, buy a new battery.•Use the battery only for its intended purpose.•Never use any charger or battery that is damaged and/or worn out.•Batteries must be recycled or disposed of properly. Do not dispose of batteries by putting them in fire!•When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord.8890ug.book Page 108 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 109 ]Reference Information•Important Safety InformationThis section provides additional safety information. A brief overview of safety can be found in “For Your Safety” on page 1.Traffic SafetyDo not use a hand-held telephone while driving a vehicle. Always park the vehicle before using the phone.After completing your phone conversation, always secure the phone back into its holder; do not place the phone on the passenger seat or place it where it can break loose in a collision or during a sudden stop.Note: The use of an alert device to operate a vehicle’s lights or horn on public roads is not permitted.Remember: Safety—Your most important call.Operating EnvironmentRemember to follow any special regulations that are in force in any area, and always switch off your phone wherever it is forbidden to use it. Otherwise, the use of your phone could cause interference or danger.When connecting the phone or any accessory to another device, read the associated user guide first and obtain detailed safety instructions.Note: Do not connect incompatible products.As with other mobile radio transmitting equipment, you are advised that, for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the phone should only be used in the normal operating position. This position is when the phone is held to your ear with the antenna pointing over your shoulder.8890ug.book Page 109 Tuesday, November 30, 1999 3:39 PM
[ 110 ] 8890 User Guide v8 11/30/99Electronic DevicesMost modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment might not be shielded against the RF signals from your wireless phone. The following four subsections provide more information about this topic.PacemakersPacemaker manufacturers recommend that a minimum separation of six inches (20 cm.) should be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers:•should always keep the phone more than six inches (20 cm) from their pacemaker when the phone is switched on•should not carry the phone in a breast pocket•should use the ear opposite the pacemaker to minimize the potential for interferenceNote: If you have any reason to suspect that interference is taking place, switch off your phone immediately.Hearing AidsSome digital wireless phones could interfere with some hearing aids. In the event of such interference, you might want to consult your service provider.Other Medical DevicesOperation of any radio transmitting equipment, including cellular phones, could interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy. Also contact these authorities if you have any questions.8890ug.book Page 110 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 111 ]Reference InformationSwitch off your phone in health care facilities or where any posted regulations instruct you to do so. Hospitals or health care facilities could be using equipment that is sensitive to external RF energy.VehiclesRF signals could improperly affect installed or inadequately shielded electronic systems in motor vehicles. These could include electronic fuel injection systems, electronic anti-skid (anti-lock) braking systems, electronic speed control systems, or air bag systems.Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.Posted FacilitiesSwitch your phone off in any facility where posted notices so require.Potentially Explosive AtmospheresSwitch off your phone if you are in any area that has a potentially explosive atmosphere, and obey all signs and instructions. Sparks in such areas could cause an explosion or fire, resulting in bodily injury or even death.You are advised to switch off the phone while at a refueling point (service station). And, you are reminded of the need to observe restrictions regarding the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants, or where blasting operations are in progress.Areas with a potentially explosive atmosphere are often—but not always—clearly marked. These areas include the following: below deck on boats; chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles, such as grain, dust or metal powders; and any other area where you would normally be advised to turn off your vehicle engine.8890ug.book Page 111 Tuesday, November 30, 1999 3:39 PM
[ 112 ] 8890 User Guide v8 11/30/99VehiclesOnly qualified personnel should service the phone or install the phone in a vehicle. Faulty installation or service could be dangerous and might invalidate any warranty that could apply to the unit.Regularly check that all wireless phone equipment in your vehicle is mounted and operating properly.Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its parts, or accessories.For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including both the installed or the portable wireless equipment, in the area over the air bag or in the air bag deployment area. If the in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.Switch off your phone before boarding an aircraft. The use of wireless telephones in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network and may be illegal.Failure to observe these instructions could lead to the suspension or the denial of telephone services to the offender, or it could result in legal action, or both scenarios could apply.•Emergency CallsIMPORTANT!This phone, like any wireless phone, operates using radio signals, wireless and landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. Therefore, you should never rely solely on any wireless phone for essential communications (e.g. medical emergencies).8890ug.book Page 112 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 113 ]Reference InformationRemember, to make or receive any calls, the phone must be switched on and be used in a service area that has adequate signal strength. Emergency calls might not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers.Always ensure that your phone is properly charged before attempting any emergency calls. If you allow your battery to become empty, you will be unable to receive or make calls, including emergency calls. You must then wait a few minutes after the charging begins to place any emergency calls.Making an Emergency Call1If the phone is not on, switch it on.2Enter the emergency number for your present location (e.g. 911 or any other official emergency number—emergency numbers vary by location).3Press If certain features are in use (Keyguard, fixed dialing, restrict calls, etc.), you might first need to turn those features off before you can make an emergency call. Consult this document and your local cellular service provider.When making an emergency call, remember to give all of the necessary information as accurately as possible. Remember that your wireless phone might be the only means of communication at the scene of an accident—do not terminate the call until given permission to do so.Radio Frequency (RF) SignalsYour wireless handheld portable telephone is a low-power radio transmitter and receiver. When it is ON, it receives and sends out radio frequency (RF) signals.8890ug.book Page 113 Tuesday, November 30, 1999 3:39 PM
[ 114 ] 8890 User Guide v8 11/30/99In August, 1996, the Federal Communications Commission (FCC) adopted RF exposure guidelines that included safety levels for handheld wireless phones. Those guidelines are consistent with safety standards previously set by both U.S and international standards bodies:ANSI C95.1 (1992)*, NCRP Report 86 (1986)*, ICNIRP (1996)*, and RSS-102 issue 1.Those standards were based on comprehensive and periodic evaluations of the relevant scientific literature. For example, over 120 scientists, engineers, and physicians from universities, government health agencies and industry reviewed the available body of research to develop the ANSI Standard (C95.1).The design of your phone complies with the FCC guidelines (and those standards).*American National Standards Institute, National Council on Radiation Protection and Measurements; International Commission on Non-Ionizing Radiation Protection.Care and MaintenanceYour phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you to fulfill any warranty obligations and allow you to enjoy this product for many years. When using your phone, battery, charger, or any accessory:• Keep it and all its parts and accessories out of the reach of small children.• Keep it dry. Precipitation, humidity, and liquids contain minerals that will corrode electronic circuits.• Do not use or store it in dusty, dirty areas as its moving parts can be damaged.• Do not store it in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.• Do not store it in cold areas. When the phone warms up to its normal 8890ug.fm Page 114 Tuesday, November 30, 1999 4:02 PM
8890 User Guide v8 11/30/99 [ 115 ]Reference Informationoperating temperature, moisture can form inside the phone, which could damage the phone’s electronic circuit boards.•Do not attempt to open it. Non-expert handling of the device could damage it.•Do not drop, knock or shake it. Rough handling can break internal circuit boards.•Do not use harsh chemicals, cleaning solvents, or strong detergents to clean it. Wipe it with a soft cloth that has been slightly dampened in a mild soap-and-water solution.•Do not paint it. Paint can clog the device’s moving parts and prevent proper operation.•If the phone, battery, charger, or any accessory is not working properly, take it to your nearest qualified service facility. The personnel there will assist you, and if necessary, arrange for service. •AccessoriesIf you want to enhance your phone’s functionality, a range of accessories are available for you. You can select any of these items to help accommodate your specific communication needs. For availability of these and other accessories, contact your service provider.A Few Practical Rules for Accessory Operation:Keep all accessories out of reach of small children.When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord.Check regularly that any vehicle-installed accessories are mounted and are operating properly.Installation of any complex car accessories must be made by qualified personnel only.8890ug.fm Page 115 Tuesday, November 30, 1999 4:02 PM
[ 116 ] 8890 User Guide v8 11/30/99Use only batteries, chargers, and accessories that have been approved by the phone manufacturer. The use of any other types could invalidate any approval or warranty applying to the phone, and could be dangerous. Refer to “Using Batteries, Chargers, and Accessories” on page 106 for important battery usage information.•BatteriesThis section provides information about the phone’s batteries. Be apprised that the information in this section is subject to change.Note: This is a lithium ion (Li-Ion) battery. Dispose of used batteries in accordance with any local regulations.The tables shown in this section provide information about battery options that are available for your phone, charging times with the Rapid Travel Charger (ACP-8U), the Standard Travel Charger (ACP-7U), talk times, and standby times. Consult your service provider for more information.Note: The charging times listed in the next section are approximate.Charging TimesNote: The times displayed above allow your battery to obtain approximately 80% of its capacity. When this happens, the battery scroll bars on your phone’s screen stop scrolling. If you want to obtain 100% battery capacity, allow another two hours for a “trickle” or “maintenance” charge.Battery Option ACP-7U Charger ACP-8U ChargerBLB-2 Li-ion Battery 650 mAh 2 hrs 40 min 1 hr 40 min8890ug.book Page 116 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 117 ]Reference InformationStandby and Talk TimesNote: The above times are approximate. Battery operation times vary according to signal conditions, network parameters that are set by the service provider, and how you use your phone.•Chargers and Other AccessoriesThis section provides information about the phone’s chargers and accessories. Be apprised that the information in this section is subject to change as the chargers and accessories change.The chargers and accessories that are described in this section are available for your phone. Contact your dealer for details. Also, refer to the accessories brochure that was included in your sales package for the entire line of Nokia Original Accessories.Note: When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for longer than a week, since overcharging the battery could shorten its life span. If left unused, a fully charged battery will discharge itself over time.Battery Option DigitalTalk Time Standby TimeBLB-2 Li-ion Battery 650 mAh 2 hrs to 3 hrs 20 min 50 to 150 hrs 8890ug.book Page 117 Tuesday, November 30, 1999 3:39 PM
[ 118 ] 8890 User Guide v8 11/30/99Standard Travel Charger (ACP-7U)This is a lightweight (187g) and durable AC charger.To use the Standard Travel Charger, plug it into a wall outlet and connect the lead from the charger to the base of your phone.Rapid Travel Charger (ACP-8)This is a lightweight (100g) and durable AC charger. Calls can be made during charging, even with a fully discharged battery.To use the Rapid Travel Charger (ACP-8), plug it into a standard 120V or 220V AC wall outlet, and connect the lead from the charger to the base of your phone.The charger can also be used together with the optional Desktop Charging Stand. Approximate charging times for discharged batteries are shown in “Charging Times” on page 115.Rapid Cigarette Lighter Charger (LCH-9)You can charge your phone’s battery from your vehicle battery by using the Rapid Cigarette Lighter Charger (LCH-9). You can also use this lightweight charger with the Desktop Charging Stand. Calls are possible during charging. A green light indicates that the charger is ready for charging (when not charging) or finished charging (if it has been charging). The battery charging times are the same as those for the Rapid Travel Charger (ACP-8).The input voltage range is from 11 to 32V DC, negative grounding. Avoid prolonged charging with the Rapid Cigarette Lighter Charger (LCH-9) when the car engine is not running; this could cause your car battery to drain. Note also, that in some cars, the cigarette lighter plug is not provided with electricity if the ignition is not switched on.8890ug.book Page 118 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 119 ]Reference InformationCompact Desktop Charging Stand (DCV-1)Used together with the Standard Travel Charger(ACP-7U) or the Rapid Travel Charger (ACP-8U), the Desktop Charging Stand is an economical choice when you need your phone close at hand, always ready for calls. This charging stand allows you to charge your phone’s battery in an upright, obtainable position on your desk.8890ug.book Page 119 Tuesday, November 30, 1999 3:39 PM
[ 120 ] 8890 User Guide v8 11/30/9919.Technical informationWeight: 3.2 oz. with BLB-2 batteryTransmitting power: GSM900, 2 W nominalGSM1900, 1 W nominalOperating voltage: 3.6V dc12V dc for car kitNetworks EGSM 900 and GSM 1900Frequency band: GSM900:935 to 960 MHz (TX)935 to 960 MHz (RX)GSM19001850 to 1910 MHz (TX)1930 to 1990 MHz (RX)Number of channels: 512 to 810Memory locations: 250 in phoneUp to 250 in SIM8890ug.book Page 120 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 121 ]Troubleshooting20.TroubleshootingThis section provides a table that lists some of the most commonly-encountered problems and provides possible solutions.Problem Possible cause Possible solutionMy phone isn’t charging. The charger and the phone are not properly connected.Securely connect the charger to the phone.The charger is not properly plugged in. Ensure that the charger is plugged in correctly.My phone isn’t making/answering calls. The battery is not charged. Charge the battery.The signal strength is poor. If you are indoors, move toward a window.I can’t listen to my voice messages. You don’t have Voice Mail service. Call your wireless service provider.8890ug.book Page 121 Tuesday, November 30, 1999 3:39 PM
[ 122 ] 8890 User Guide v8 11/30/99I can’t listen to my voice messages. (continued) You have not set up your voice mailbox with your service provider.Call your wireless service provider.You have not saved your Voice Mail number in your phone.Refer to “Voice Mail++” on page 35.The Voice Mail number you have saved is incorrect.Call your wireless service provider.You have forgotten your password or are entering it incorrectly.Call your wireless service provider.Problem Possible cause Possible solution8890ug.book Page 122 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 123 ]Frequently Asked Questions (FAQ)21.Frequently Asked Questions (FAQ)This section lists and answers the questions that you most frequently ask. Where necessary, the answers refer you to the appropriate text within this guide.Note: Some of the answers tell you to use menu shortcuts. For a complete listing of these shortcuts, refer to “List of menu shortcuts” on page 21.Q. How do I lock my phone?A. Press 4 6 1, press , enter your PIN code, and press . Scroll to and press .Refer to “PIN and PUK codes” on page 70 for more information.Q. How do I unlock my phone?A. Press 4 6 1, press , enter your PIN code, and press . Scroll to and press .Refer to “PIN and PUK codes” on page 70 for more information.Q. What is my lock code?A. The lock code enables you to lock your phone, thus preventing someone else from using it. The default lock code is 1234 (depending on your service provider). However, it is suggested that you change this code immediately.Refer to “PIN and PUK codes” on page 70 for more information.8890ug.book Page 123 Tuesday, November 30, 1999 3:39 PM
[ 124 ] 8890 User Guide v8 11/30/99Q. What is my security code?A. The default security code is 12345. However, it is suggested that you change this code immediately. Certain features can be used only after the correct security code has been successfully entered.Refer to “Security code” on page 73 for more information.Q. How do I lock the keypad?A. There are two ways you can lock the keypad: Close the sliding cover and press . ORLeave the sliding cover open and press. Refer to “Locking the keypad (Keyguard)” on page 69 for more information.Q. How do I unlock the keypad?A. There are two ways you can unlock the keypad: With the sliding cover closed press and .ORWith the sliding cover open, press .Refer to “Locking the keypad (Keyguard)” on page 69 for more information.Q. How can I close the sliding cover without disconnecting the call?A. Press Options, then close the sliding cover to stay connected. Also, this feature makes it easier to use accessories, such as a headset. Refer to “Using the sliding cover” on page 16.Q. How do I make the ringing louder?A. Press 3 1 2 3, press , scroll to the volume level desired, then press .Refer to “Profiles” on page 61 for more information.8890ug.book Page 124 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 125 ]Frequently Asked Questions (FAQ)Q. How do I change the ringing tone?A. Press 3 1 2 2 and press . Scroll through the list of ringing tones until you find the one you want, then press .Refer to “Profiles” on page 61 for more information.Q. How do I store my voice mailbox number?A. Press 1 9 2. Enter your voice mailbox number, then press . This number can be up to 32 digits long. This voice mailbox number is valid unless your phone number changes. If your phone number changes, you will have to save a new voice mailbox number.Refer to “Saving the Voice Mailbox Number” on page 36 for more information.Q. How do I call my voice mailbox number (retrieve voice messages)?When your phone alerts you to new voice messages, press and follow the prompts. If you’d rather listen later, press .To listen to your voice messages at a later time, perform one of the following actions:•if you’ve saved your voice mailbox number in your phone, press and hold to call your voice mailbox. •call your voice mailbox number as you would any other telephone number, then follow the directions provided.See “Voice Mail++” on page 35 for more information.Q. How do I find my phone’s model number?A. Turn off your phone, then remove the battery from the back of the phone. Read the sticker that is inside and you will find, after the word Model, your phone’s model number is printed.8890ug.book Page 125 Tuesday, November 30, 1999 3:39 PM
[ 126 ] 8890 User Guide v8 11/30/99Q. How do I redial the last-dialed number.A. Press twice. See “Redialing the last-dialed number” on page 18.Q. How do I assign a key to 1-touch dialing?A. Press , scroll to and press .Scroll to the number you want to assign a a 1-touch dial number and press .Note: If you have numbers saved in SIM memory, the first nine numbers stored automatically stored in keys 1 - 9 as one touch dial numbers.Scroll to the phone book entry that you want to assign to this key and press .Repeat these steps as many times as necessary. Refer to “1-Touch Dialing” on page 52 for more information.Q. How do I find out how many memory locations the phone has?A. Press and scroll to .Press .Scroll to and press again. A message appears says where xx indicates the amount of memory locations. Scroll to see SIM card memory status1Q. How do I find my phone’s IMEI number?A. Turn your phone off, open the rear sliding cover, then remove the battery. Your phone’s IMEI number is printed on the sticker inside the battery cover, under the first bar code. Or press 06 Q. How can I change the contrast of my phone’s display?A. The contrast of your phone’s display is fixed and cannot be changed.8890ug.book Page 126 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 127 ]Frequently Asked Questions (FAQ)NOKIA One-Year Limited WarrantyNokia Mobile Phones, Inc. (“NMP”) warrants that this cellular phone (“Product”) is free from defects in material and workmanship that result in Product failure during normal usage, according to the following terms and conditions:1. The limited warranty for the Product extends for ONE (1) year beginning on the date of the purchase of the Product.2. The limited warranty extends to the original purchaser of the Product (“Consumer”) and is not assignable or transferable to any subsequent purchaser/end-user.3. The limited warranty extends only to Consumers who purchase the Product in the United States.4. During the limited warranty period, NMP will repair, or replace, at NMP's option, any defective parts, or any parts that will not properly operate for their intended use with new or factory rebuilt replacement items if such repair or replacement is needed because of product malfunction or failure during normal usage. No charge will be made to the Consumer for any such parts. NMP will also pay for the labor charges incurred by NMP in repairing or replacing the defective parts. The limited warranty does not cover defects in appearance, cosmetic, decorative or structural items, including framing, and any non-operative parts. NMP's limit of liability under the limited warranty shall be the actual cash value of the Product at the time the Consumer returns the Product for repair, determined by the price paid by the Consumer for the Product less a reasonable amount for usage. NMP shall not be liable for any other losses or damages. These remedies are the Consumer’s exclusive remedies for breach of warranty.8890ug.book Page 127 Tuesday, November 30, 1999 3:39 PM
[ 128 ] 8890 User Guide v8 11/30/995. Upon request from NMP, the Consumer must prove the date of the original purchase of the Product by a dated bill of sale or dated itemized receipt.6. The Consumer shall bear the cost of shipping the Product to NMP in Melbourne, Florida. NMP shall bear the cost of shipping the Product back to the Consumer after the completion of service under this limited warranty.7. The Consumer shall have no coverage or benefits under this limited warranty if any of the following conditions are applicable:a) The Product has been subject to abnormal use, abnormal conditions, improper storage, exposure to moisture or dampness, unauthorized modifications, unauthorized connections, unauthorized repair, misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the fault of NMP, including damage caused by shipping.b) The Product has been damaged from external causes such as collision with an object, or from fire, flooding, sand, dirt, windstorm, lightning, earthquake or damage from exposure to weather conditions, an Act of God, or battery leakage, theft, blown fuse, or improper use of any electrical source, or damage caused by the connection to other products not recommended for interconnection by NMP.c) NMP was not advised by the Consumer in writing of the alleged defect or malfunction of the Product within fourteen (14) days after the expiration of the applicable limited warranty period.d) The Product serial number plate or the accessory data code has been removed, defaced or altered.e) The defect or damage was caused by the defective function of the cellular system, by inadequate signal reception by the external antenna, or by viruses or other software problems introduced into the Product.8. Nokia does not warrant uninterrupted or error-free operation of the Product. If a problem develops during the limited warranty period, the Consumer shall take the following step-by-step procedure:8890ug.book Page 128 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 129 ]Frequently Asked Questions (FAQ)a) The Consumer shall return the Product to the place of purchase for repair or replacement processing.b) If “a” is not convenient because of distance (more than 50 miles) or for other good cause, the Consumer shall ship the Product prepaid and insured to:Nokia Mobile Phones, Inc.Attn: Repair Department795 West Nasa Blvd.Melbourne, FL 32901c) The Consumer shall include a return address, daytime phone number and/or fax number, complete description of the problem, proof of purchase and service agreement (if applicable). Expenses related to removing the Product from an installation are not covered under this limited warranty.d) The Consumer will be billed for any parts or labor charges not covered by this limited warranty. The Consumer will be responsible for any expenses related to reinstallation of the Product.e) NMP will repair or authorize the repair of the Product under the limited warranty within 30 days after receipt of the Product by NMP or an NMP authorized service center. If NMP cannot perform repair covered under this limited warranty within 30 days, or after a reasonable number of attempts to repair the same defect, NMP at its option, will provide a replacement Product or refund the purchase price of the Product less a reasonable amount for usage.f) If the Product is returned to NMP during the limited warranty period, but the problem with the Product is not covered under the terms and conditions of this limited warranty, the Consumer will be notified and given an estimate of the charges the Consumer must pay to have the Product repaired, with all shipping charges billed to the Consumer. If the estimate is refused, the Product will be returned freight collect. If the Product is returned to NMP after the expiration of the limited warranty period, NMP's normal service policies shall apply and the Consumer will be responsible for all shipping charges.8890ug.book Page 129 Tuesday, November 30, 1999 3:39 PM
[ 130 ] 8890 User Guide v8 11/30/999. The Product consists of newly assembled equipment that may contain used components that have been reprocessed to allow machine compliance with Product performance and reliability specifications.10. ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION OF THE FOREGOING LIMITED WRITTEN WARRANTY. OTHERWISE, THE FOREGOING LIMITED WARRANTY IS THE CONSUMER’S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. NMP SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO, LOSS OF ANTICIPATED BENEFITS OR PROFITS, LOSS OF SAVINGS OR REVENUE, PUNITIVE DAMAGES, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT OR FACILITIES, DOWNTIME, THE CLAIMS OF ANY THIRD PARTIES, INCLUDING CUSTOMERS, AND INJURY TO PROPERTY, RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM BREACH OF THE WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER LEGAL OR EQUITABLE THEORY, EVEN IF NMP KNEW OF THE LIKELIHOOD OF SUCH DAMAGES. NMP SHALL NOT BE LIABLE FOR DELAY IN RENDERING SERVICE UNDER THE LIMITED WARRANTY, OR LOSS OF USE DURING THE PERIOD THAT THE PRODUCT IS BEING REPAIRED.11. Some states do not allow limitation of how long an implied warranty lasts, so the above one-year warranty limitation may not apply to you (the Consumer). Some states do not allow the exclusion or limitation of incidental and consequential damages, so certain of the above limitations or exclusions may not apply to you (the Consumer). This limited warranty gives the Consumer specific legal rights and the Consumer may also have other rights which vary from state to state.12. NMP neither assumes nor authorizes any authorized service center or any other person or entity to assume for it any other obligation or liability beyond that which is expressly provided for in this limited warranty including the provider or seller of any extended warranty or service agreement.8890ug.book Page 130 Tuesday, November 30, 1999 3:39 PM
8890 User Guide v8 11/30/99 [ 131 ]Frequently Asked Questions (FAQ)13. This is the entire warranty between NMP and the Consumer, and supersedes all prior and contemporaneous agreements or understandings, oral or written, and all communications relating to the Product, and no representation, promise or condition not contained herein shall modify these terms.14. This limited warranty allocates the risk of failure of the Product between the Consumer and NMP. The allocation is recognized by the Consumer and is reflected in the purchase price of the Product.15. Any action or lawsuit for breach of warranty must be commenced within eighteen (18) months following delivery of the Product.16. Questions concerning this limited warranty may be directed to: Nokia Customer Service7725 Woodland Center Blvd., Ste. 150Tampa, FL 33614Telephone: 1-888-NOKIA2U (1-888-665-4228)or (813) 288-3800Facsimile: (813) 287-6612TTY Users: 1-800-24NOKIA (1-800-246-6542)17. The limited warranty period for NMP supplied attachments and accessories is specifically defined within their own warranty cards and packaging.*Nokia is a registered trademark of Nokia Corporation.8890ug.book Page 131 Tuesday, November 30, 1999 3:39 PM

Navigation menu