Micron Electronics LGMS WIFI SENSOR User Manual 001 error

Micron Electronics LLC. WIFI SENSOR 001 error

15_LifeGait Motion Sensors UserMan,r2

1 LifeGait Motion Sensors User Manual Revision: 1.00 Document Title LifeGait Motion Sensors User Guide Version 1.00 Finale Date 2016-03-22 Status Released Document Control ID LifeGait Motion Sensors
2Contents 1 Introduction ......................................................................................................................................................2 Product Overview .............................................................................................................................................2.1 Appearance .......................................................................................................... 3 2.2 Switch/5PIN Interface Description ........................................................................ 3 2.3 LED Description ................................................................................................... 4 3 Getting Started .................................................................................................................................................3.1 Parts List .............................................................................................................. 5 3.2 Battery Charging .................................................................................................. 5 3.3 LifeGait Motion Sensors Data Cable .................................................................... 6 3.4 Power on/Power off .............................................................................................. 6 4 Trouble shooting and Safety info ......................................................................................................................4.1 Trouble shooting .................................................................................................. 7 4.2 Safety info ............................................................................................................ 7
31 Introduction LifeGait Motion Sensors is a Tracker which is designed for getting information of human motion , including WIFI function meanwhile(e.g. a wearable product). With superior receiving sensitivity, WIFI frequencies 2.4GHz. Based on the embedded wireless protocol, LIFEGAIT MOTION SENSORS can communicate with the backend server through WIFI function, and transfer data of sensor, device information etc… 2 Product Overview 2.1 Appearance Figure 1-1 2.2 Switch/5PIN Interface Description Button /5PIN Interface Description KEY/interface Description SWITCH Power on/off LifeGait Motion Sensors 5PIN interface Connect a 3.8V Li-ion or Li-Polymer battery can power on LIFEGAIT MOTION SENSORS Connect a 5V DC adapter can charge the internal battery
4Backend server developer or administrator can use the data cable to configure LIFEGAIT MOTION SENSORS (by RD or engineer not by end user). 2.3 LED Description Figure 1-2 There are Three LED lights in LifeGait Motion Sensors device, the description as following. Light Event State POWER LED Power On Blue LED Solid Power Off Blue LED Dark Charging LED Fully charged Green LED Dark In charging Green LED Solid LOW BATTERY LED Low battery Red LED Solid High battery Red LED Dark
53 Getting Started 3.1 Parts List Name Picture Remark LifeGait Motion Sensors LifeGait Motion Sensors USB Cable It is used to charge the internal battery of LifeGait Motion Sensors LifeGait Motion Sensors Data and charger Cable the data cable which can be used for firmware upgrading and debug. It also includes the charger interface (by RD or engineer not by end user). 3.2 Battery Charging The following items are suggestion for battery charge, please pay more attention.  Please connect AC-DC power adapter with LIFEGAIT MOTION SENSORS device.  Insert the AC-DC power adapter into the power socket.  During the charging process, the LOW BATTERY LED light will flash slow. When the battery is fully charged, the Power LED light will be Ever-light.  You can also charge the battery using charging cable which connects LIFEGAIT MOTION SENSORS device with the Adapter.  Charging will last about 3 hours. Note: If the LifeGait Motion Sensors device is firstly used, please make sure the battery is fully charged, which will make the life of battery much longer.
63.3 LifeGait Motion Sensors Data Cable LifeGait Motion Sensors Data Cable is a cable with a 5PIN connector. The data cable is used for data download, which will be used for firmware update or configuration and can be used for charging at the same time (by RD or engineer not by end user). Figure 2-1 3.4 Power on/Power off Figure 2-2 Power on:  Push the On/off Switch to the right side then power on LIFEGAIT MOTION SENSORS. Note that, the Power on LED(Blue) light will be solid. Power off:  Push the On/off Switch to the left side then power off LIFEGAIT MOTION SENSORS. Note that, the Power on LED(Blue) light will be dark., this indicates the LIFEGAIT MOTION SENSORS has been powered off..
74 Trouble shooting and Safety info 4.1 Trouble shooting 4.2 Safety info The following items are suggestion for safety use, please pay more attention.  Please do not disassemble the device by yourself.  Please do not put the device on the overheating or too humid place, avoid exposure to direct sunlight. Too high temperature will damage the device or even cause the battery explosion.  Please do not use LifeGait Motion Sensors on the airplane or near medical equipment. FCC Caution. § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular Trouble Possible Reason Solution Unable to power off LifeGait Motion Sensors . On/off Switch is damage The device will power off when push the On/off Switch to the left side Battery can not be charged The battery has not been used for too long time and has been locked. Using a external power source with 3.6V to 4.2V DC power supply to active the battery or apply for after sale help.
8installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. RF Radiation Exposure Statement: 1. This equipment compliance with FCC RF radiation exposure limits set forth for an uncontrolled environment for body-worn configuration.2. The maximum summation of SAR was0.03 W/Kg(1g) for Body. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu