Microhard Systems 12XA58-26 High Power MiniPCI 5.8GHz User Manual XA58 26 manual 120504

Microhard Systems Inc High Power MiniPCI 5.8GHz XA58 26 manual 120504

UserManual.wiki >

Microhard Systems >

12XA58 26 User Manual

Users Manual

Features • Compliant with IEEE 802.11a standard • Up to 26dBm output power with Built-in ESD Protection • RF ESD/EMP Immunity Threshold: 15KeV ① • Supports Atheros Proprietary "Super Mode" delivering up to 108 Mbps data link rate • High efficiency dual-PA design • High Performance combined with Low Power Consumption • Multi-Country Roaming Supported (IEEE802.11d Global Harmonization Standard) • Single MMCX/U.FL Antenna Connector • Suitable for Embeded System or OEM Project • Affordable and Ideal for a Variety of Applications High Power MiniPCI 5.8GHz XA58-26

Technical Specifications Chipset Atheros AR54xx series（AR5414） Host Interface 32-bit mini-PCI Type IIIA+ (1.85mm longer than IIIA type) Operating Voltage 3.3 VDC 11a Cont. Tx @6M 3.5W 11a Cont. Rx 1.9W Power Consumption Standby 1.4W Antenna Connector 1 x MMCX IEEE 802.11a: 54Mbps 48Mbps 36Mbps 24Mbps 18Mbps 12Mbps 9Mbps 6Mbps Standards Conformance Super-A: 108Mbps 96Mbps 72Mbps 54Mbps 48Mbps 36Mbps 24Mbps 18Mbps 12Mbps 6Mbps Frequency Range IEEE 802.11a 5.725 ~ 5.850 GHz (US & Canada) Modulation Techniques OFMD: BPSK, QPSK, 16-QAM, 64-QAM Certification FCC, CE ROHS Compliance Yes Temperature Range Operating: -20ºC to 70ºC Storage: -40ºC to 90º Humidity Operating: 5% to 95% (non-condensing) Storage: Max.90% (non-condensing) Dimension 59.6 x52.8x 5.5 mm Weight 20 grams WLM54A-26-ESD MINIPCI CARD RADIO TX SPECIFICATIONS RX SPECIFICATIONS 5GHz 5600MHz 5700MHz 5785MHz 5825MHz Tolerance DataRate Sensitivity Tolerance 6Mbps 26dBm 26dBm 26dBm 26dBm +1.0/-1.5 dB 6Mbps -96dBm ±2dB 9Mbps 26dBm 26dBm 26dBm 26dBm +1.0/-1.5 dB 9Mbps -96dBm ±2dB 12Mbps 26dBm 26dBm 26dBm 26dBm +1.0/-1.5 dB 12Mbps -95dBm ±2dB 18Mbps 26dBm 26dBm 26dBm 26dBm +1.0/-1.5 dB 18Mbps -88dBm ±2dB 26dBm 26dBm 26dBm 26dBm +1.0/-1.5 dB 24Mbps 24Mbps -86dBm ±2dB 36Mbps 24dBm 24dBm 24dBm 24dBm +1.0/-1.5 dB 36Mbps -83dBm ±2dB 48Mbps 23dBm 23dBm 23dBm 23dBm +1.0/-1.5 dB 48Mbps -79dBm ±2dB 54Mbps 22dBm 22dBm 22dBm 22dBm +1.0/-1.5 dB 5GHz 54Mbps -76dBm ±2dB ADJUSTABLE CHANNEL SIZE SUPPORT 5MHz 10MHz 20MHz 40MHz ESD CABLE SPECIFICATIONS Cable Dimensions 26cm length Terminal Material Copper Attachment Procedure End of ESD Cable tied to Earth Ground ORDERING INFORMATION② CODES Version CARTON DIMENSIONS WLM54A26ESD 8BS ESD For 50 pcs / carton, 0.45m*0.45m*0.24m/0.006=8.1KG • Module grounding cable included ② Configurations are subjected to change without notice Please contact Compex sales representatives for other available configurations

Compliance Information FCC Compliance Statement: This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This device must accept any interference received, including interference that may cause undesired operation. Product that is a radio transmitter is labeled with FCC ID. FCC Caution: (1) Exposure to Radio Frequency Radiation. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (2) Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. (3) This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. (4) Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. (5) Outdoor Operations in the 5.15~5.25GHz band is prohibited. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. WARNING: This Wireless Mini PCI Adapter does not support ad-hoc mode Function The Host system using XA58-26, should have label indicated "Contains FCC ID: NS912XA58-26"

IC warning- English:This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.2. Changes or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment.- French:Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement."Exposure to Radio Frequency Radiation:This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.Transmitter AntennaUnder Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.This radio transmitter (Model XA58-26, IC: 3143A-12XA5826) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.The max antenna gain is 2.00 dBi for testThe Host system using XA58-26, should have label indicated "Contains IC: 3143A-12XA5826"

Navigation menu