Micro Star MS6833 Mini PCI Card User Manual 6823 TOC

Micro Star International Co Ltd Mini PCI Card 6823 TOC

Contents

User Manual Part 2

5Wireless 11g MiniPCI Card MP54G2 User’s GuideFrequency, Bandwidth, and Channels - 2.4 ~ 2.4835 GHz Frequency Band - 13 Channels - Maximum 3 Non-Overlapped Channels - 25 MHz Bandwidth Per ChannelTransmitter Output Power - Output Power: 14 dBm ± 1 dBWireless Coverage - Up to 500mReceiving Sensitivity - ≤ -82 dBm @ 11 Mbps (DSSS/CCK) - ≤ -68 dBm @ 54 Mbps (OFDM)Software SpecificationsSecurity Mechanism - 64-/128-Bit WEP Key - AES-CCM Authentication Mode (driver update) - WPA Support (driver update) - LEAP/PEAP Support (firmware upgrade)Authentication Mechanism - Open Authentication (Default) - Shared-Key AuthenticationOperating System - Microsoft® Windows® 98SE/ME/2000/XP
6Wireless 11g MiniPCI Card MP54G2 User’s GuideSystem RequirementsBefore installing the MP54G2, your PC should meet thefollowing:Desktop/notebook PC with an available MiniPCI slot.Windows® 98SE/ME/2000/XP operating system.Minimum 5M bytes free disk space for installing the driverand utilities.CD-ROM drive, double speed or higher.Package ContentsUnpack the package and check all the items carefully. Ifany item contained is damaged or missing, please contactyour local dealer as soon as possible. Also, keep the boxand packing materials in case you need to ship the unit inthe future. The package should contain the following items:One Wireless 11g MiniPCI Card - MP54G2.One Quick Installation Guide.One Installation CD including drivers, utilities, and themanuals.>>> 1.4>>> 1.5
7Wireless 11g MiniPCI Card MP54G2 User’s GuideProduct View>>> 1.6External antenna connectorsConnect to external antennas forenhanced data transmission andreception. The external antennasare well designed on the desktopor notebook computers.Golden Finger
8Wireless 11g MiniPCI Card MP54G2 User’s GuideHardware Installation >>> 2.1The following diagrams provide you a basic installation forthe MP54G2, including how to install and remove theMiniPCI card. The instruction below is suitable for mostcomputers with MiniPCI slot. For more information aboutthe MiniPCI module, please refer to your computer’smanual.Installing the MP54G2 1. Locate the Mini PCI slot on the mainboard. 2. Place the MP54G2 over the MiniPCI slot (at anangle of 30 degrees). Then, gently insert it intothe slot until the golden finger of the cardgets fully inserted. 3. Press down the card, and the retaining clips(on two sides of the slot) will lock onto thenotches of the card.Foolproof notch
9Wireless 11g MiniPCI Card MP54G2 User’s Guide >>> 2.2 Removing the MP54G2 1. Locate the MiniPCI slot with MP54G2 installed. 2. Press the retaining clips outwards, and thecard should bound upwards slightly after beingreleased from the slot. 3. Remove the card from the MiniPCI slot carefully.
10Wireless 11g MiniPCI Card MP54G2 User’s GuideSoftware InstallationThis chapter describes the procedures of installing thedriver and utility. Follow the instruction step by step tofinish the installation. If you use Windows® 98SE/ME,please prepare the Windows® Setup CD at hand beforeinstalling the driver; because the system will ask you toinsert the Setup CD to copy files during the installation.Please NOTE that the MP54G2 should be installed intoyour computer before installing the driver and utility. Then,the operating system will detect a new device and start toconfigure the new device. Click Cancel here to startinstallation from the InstallShield Wizard.ClickTip: The wireless LAN adaptershould be installed into yourPC before installing the driverand utility.Your Wireless LAN adapter typeInsert the software CD into your CD-ROM drive, and theSetup program should launch automatically.If the Autorun program doesn’t launch automatically, clickStart at the taskbar and select Run.... Type E:\setup.exe(where E is your CD-drive) in the Open box and click OK tolaunch the Setup program manually.The main screen of Setup program will appear as below.Click the Install Software button.Step 1.
11Wireless 11g MiniPCI Card MP54G2 User’s GuideClickThe welcome screen of InstallShield Wizard appears. ClickNext.Read and accept the License Agreement; then, click Next.In the following window, enter the user’s information (UserName, Organization) in the respective fields; then, clickNext.Step 2. Click Install and the program will copy the necessary filesto the system. The progress indicator shows the install-ing status.If you use Windows 98SE/ME, you may be asked to insert theWindows Setup CD during the installation. Please insert the SetupCD by the on-screen instruction to continue the installation.Step 3.Click Finish when the installation is completed. The MSIWireless LAN icon* will appear in the status area.Step 4.MSI Wireless LAN icon

Navigation menu