Mengxiang Technology C2 Bluetooth speaker clock User Manual C2

Shenzhen Mengxiang Technology Co., Ltd Bluetooth speaker clock C2

User Manual

ManualC2 bluetooth speaker clockSpecification: ：1. Put the size AA battery into the box, and set the right time.2. Connect the DC cable with DC adaptor, and turn on thepower on-off, when hear”beep”, the clock is on.3. Connect the clock with your phone by bluetooth. Theproducts’bluetooth name is C2. when succeeding pairing, you shouldhear”beep beep”, and the blue LED will flash. Frontpower on-offindicator LEDBackRemark: pay attention to the negative and positive.battery boxTiming knobDC cableSpecification:Malfunction analysis:Legal information:◆ Size：260X260X38.9mm◆ BT working distance：10m◆ Product weight: (including the battery pack): 270g◆ Working voltage : 3.3-5V ◆ Power supply : DC 9V、1.5A◆ Frequency Response : 120Hz~16KHz◆ Bluetooth IC & version : CW6686E V4.2◆ Output power : 7W*2 RMS(THD=10%)Consult the after-sale service for help.Any copy, changes or modifications of the user manual not expressly approvedunless dealer’s permission. ◆ S/N : ≥70db◆ Distortion : ≥<0.5%◆ Driver Size : 2"1、Do not use the bluetooth speaker clock near water or humid; do not use the devicenear the bathtub, water tank, swiming pool and so on.2、Do not install the bluetooth speaker clock in the hot or cold environment. 3、Do not expose the device in the sunshine directly.4、Do not use the device near fire, such as, stove, candle or fireplace and so on.5、Do not use abrasive cleaning solvents to clean the bluetooth speaker clock, and charge the apparatus and install the AA size battery in time to make sure the device work. Cautions and warnings:Caution:1 . Do not take this apparatus apart or repait it.2 . Do not use this apparatus near water and humid3. Clean only with a dry cloth.Limited WarrantyYou may within 1 year from your original date of purchase return it to the authorizedservice for repair.Bluetooth Connection Method for Android system: 1. Go to SETTINGS> bLUETOOTH(make sure bluetooth isturned ON)2. When your bluetooth enabled device finds the speaker,select “C2” from the list of found devices. Whensucceeding pairing, you will hear “beep beep”. And theblue led light will flash slowly.1. Go to SETTINGS> bLUETOOTH(make sure bluetooth isturned ON)2. When your bluetooth enabled device finds the speaker,select “C2” from the list of found devices. Whensucceeding pairing, you will hear “beep beep”. And theblue led light will flash slowly.Bluetooth Connection Method for IOS system FCC Statement:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician forhelp.Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.RF Exposure InformationThe device has been evaluated to meet general RF exposure requirement.

Navigation menu