Mascot Electric CC-2500 2.4GHz RF Module User Manual CC2500 MO

Mascot Electric Co., Ltd. 2.4GHz RF Module CC2500 MO

User Manual

MO-CC25002.4GHz FSK/MSK/ASK/OOK TRANSCEIVER MODULE 2.4GHz FSK/MSK TRANSCEIVERDescription MO-CC2500 is a FSK /MSK Transceiver module. It provide extensive hardware support for packet handling ,data buffering ,burst transmissions , clear channel assessment, link quality indication and wake on radio . It ‘s data stream can be Manchester coded by the modulator and decoded by the demodulator .It has a high performance and easily to design your product. It can be used in 2400-2483.5MHz ISM/SRD band systems, Consumer Electronics, Wireless game controllers, Wireless audio wireless vKB/Mouseand otherswirelesssystems.The Module’s frequency ,Output power , Sensitivity could be programming .And have a Digital RSSI function could be used . Features Low current consumption. Easy for application. Efficient SPI interface Operating temperature range : ﹣40℃～＋85℃Operating voltage :1.8~ 3.6 Volts. Available frequency at : 2.4-2.483GHz Programmable output power and hi sensitivity Applications 2400-2483.5MHz ISM/SRD band systems Consumer Electronics Wireless game controllers Wireless audio Wireless keyboard and mouse Absolute Maximum Ratings - 1 - Parameter Rating Units Supply Voltage 3 VDC Operating Temperature -40 to +85 ℃ 
MO-CC2500Pin Descriptions - 2 - Pin No Pin Name Pin Type Description 1 VCC Power 1.8V-3.6V digital power supply for digital I/O’s and for the digital core voltage regulator 2 SI Digital Input Serial configuration interface, data input 3 SCLK Digital Input Serial configuration interface, clock input 4 SO Digital Output Serial configuration interface, data output. Optional general output pin when CSn is high 5 GDO2 Digital Output Digital output pin for general use: • Test signals • FIFO status signals • Clear Channel Indicator • Clock output, down-divided from • Serial output RX data 6 GND Ground GND 7 GDO0 Digital I/O Digital output pin for general use: • Test signals • FIFO status signals • Clear Channel Indicator • Clock output, down-divided from XOSC • Serial output RX data • Serial input TX data Also used as analog test I/O for prototype/production testing 8 CSn Digital Input Serial configuration interface, chip select 
MO-CC2500- 3 - 
MO-CC2500- 4 - 
MO-CC2500RF Receive section - 5 - 
MO-CC2500- 6 - 
Notice: The user should not modify or change this equipment without written approval form Mascot Electric Co., Ltd. Modification could void authority to use this equipment. Label for end product must include “Contains FCC ID: JEBCC-2500” or “A RF transmitter inside, FCC ID: JEBCC-2500”. FCC ID Label Graph: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: If the product is too small to make so many text labels, only need to indicate the FCC ID number on the label, but the above text will be printed in the manual or packaging box. IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device. FCC ID: JEBCC-2500 Model: CC2500

Navigation menu