Makeblock BLUETOOTH01 Bluetooth Module (Dual Mode) V2.0_a User Manual

Makeblock Co., Ltd. Bluetooth Module (Dual Mode) V2.0_a

User Manual

1 Dual-mode Bluetooth module Bluetooth Module (Dual Mode) V2.0_a 
2 1.Overview ThismoduleisafullyintegratedBluetoothmodulethatcomplieswithBluetooth4.2dualmodeprotocols(BR/EDR/BLE).ItprovidesseveralinterfacessuchasUART,etc.,whichcancustomizeddifferentapplications.ItsupportsSPP,BLEprofiles.ItintegratesMCU,Basebandcontroller,RF,etc.inasmallpackage,sothedesignerscanhavebetterflexibilitiesfortheproductshapes.ItcanbecontrolledbyUARTportorotherinterfaces.Pleaserefertosoftwaredesignguidefortheinterfacingprotocol. 2. Feature 1．Fully qualified Bluetooth 4.2/4.1/4.0/3.0/2.1/2.0/1.2/1.1 2．Low power 3．Class 2 support(high output power) 4．support classic Bluetooth (BR) and low- power Bluetooth LE 5．The default UART Baud rate is 115200bps and can support 9600、19200、38400、57600、115200bps,. 6．UART, data connection interfaces 7．Embedded Bluetooth stack profiles support(requires no host stack): SPP, HFP/HSP, A2DP, AVRCP, MAP, and all BLE protocols. 8．Data Throughput 1Mbps(BR) 24Kbps(LE) 9．Operating Characteristics： 　 Voltage power supply（3.5V~5.5V）； Operating temperature （-10 ℃~70℃）； 10．RF characteristics Frequency: 2.402 to 2.480GHz Receiving sensitivity : -90dBm (BR), - 89dBm (LE) Output Power : 2dBm (BR), 2dBm (LE) 11．Package size 12．15.9mm * 13.7mm * 0.8mm 3.ApplicationFields Smart Watch and Bluetooth Bracelet Health & Medical devices Measurement and monitoring systems Industrial sensors and controls robot Asset tacking
3 4.Photo of module 5.specifications OperatingFrequencyBand2.4GHz~2.48GHzunlicensedISMbandBluetoothSpecificationV2.1+EDR/V3.0/V4.0/V4.1(BLE)BluetoothProtocolA2DP,AVRCP,HFP,SPPBAS,DIS,FMP,HRP,HRS,HTP,HTS,IAS,LLSOutputPowerClassClass2OperatingVoltageCore:1.2V,IO:3.3V,BAT:3.4V~4.2VOperatingtemperaterange‐10℃~+70℃ExternalInterfaceUART,SPI,IR,DMIC,SPDIFTX6.Pin definitions
4PINNO.NAMETYPEFUNCTION1DTRIOIO2NCNCNC3RSTIORESETPINLOWACTIVE4RXIOUARTRX5TXIOUARTTX6GNDPowergroundGND7VCCPowerVCC
57.UARTInterface OperationofUARTUncontrolflow8.Module Size TopVIEW
6Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.This product should not collocate with other radio. If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: 2AH9Q-BLUETOOTH01” or “Contains FCC ID: 2AH9Q-BLUETOOTH01”. The module’s antenna is internal antenna, and the antenna can’t be replaced. (a)The module should not collocate with other wireless radio(b) PCB antenna of antenna OEM should be use. Antenna Gain is0dBi to connect with the antenna seat.

Navigation menu