MS Sedco CP-TXHH CP/TX DUAL FREQUENCY R/C TRANSMITTER User Manual CP TXHH Inst

MS Sedco, Inc. CP/TX DUAL FREQUENCY R/C TRANSMITTER CP TXHH Inst

MANUAL

8701 Castle Park Drive n Indianapolis, Indiana 46256Telephone: (800) 842-2545/(317) 842-2545 n www.mssedco.com n custsvc@mssedco.comPage 1Section 1General DescriptionSection 2.!CP-TXHHUniversal 300/390 MHz Handheld Transmitter The CP-TXHH radio transmitter is designed to provide reliable WIRELESS activation of any automatic door. It is part of the most extensive line of programmable wireless products available.The CP-TXHH radio transmitter is a universal unit which can operate in either the 300MHz or 390MHz systems.The CP-TXHH transmitter is housed in a lightweight, ergonomic handheld enclosure. Two screws allow access for easy battery replacement and programming/setup.Basic Operation1) Remove the cover of the handheld enclosure by removing the two screws on the back side of the unit.2) Program the transmitter by setting the 12 dip switches on the printed circuit board (PCB) to match the receiver. Only use the first 10 switches for the 300MHz system. Then, set the slide switch (SW2) to either 300MHz or 390MHz as shown below (fig. 1)4) Pushbutton 1 will transmit the code on the dip switches, while pushbutton 2 will transmit the same code with dip switch #2 in the opposite position.3) Reassemble the unit into the enclosure and tighten the two screws.CP-TXCP-TXHHFigure 1WARNING: Any changes or modifications not expressly approved by MS Sedco could void the user’s authority to operate this equipmentOPERATING INSTRUCTIONSCP-TXHH PCB390300SW2 TYPE A23 BATTERY-+CP-TXHH ENCLOSURE

Navigation menu