MOTREX MTXM100AD Smart Display User Manual 2

MOTREX CO., LTD. Smart Display 2

Contents

User Manual 2

27Getting started with navigationENGLISHPrecautions for safe drivingPlease observe and comply with local trafficrules and regulations.••For your safety, some features cannot be oper-ated while driving. Features that cannot be operated will be disabled.••The route displayed for destination guidance is a reference and the route guidance will take you to the vicinity of your destination. The high-lighted route is not always the shortest distance, the least congested, and in some cases might, not be the fastest route.••Road, name, and POI information may not always been completely updated. It might hap-pen that road names and POI information is not up to date.••The car position mark does not always indicate your exact location. This system uses GNSS information, various sensors, and road map data to display the current position. However, errors in displaying your location may occur if the sat-ellite is transmitting inaccurate signals or two or less satellite signals can be received. Errors that occur in such conditions cannot be corrected.••The position of the vehicle within the navigation may differ from your actual location depending on various reasons, including the satellite trans-mission state, vehicle state (driving location and conditions), etc. Additionally, the car position mark may differ from the actual position if the map data is different from the actual road land-scape, such as changes due to the construction of new roads. If such differences occur, driving for a short period of time will automatically correct the position of the vehicle through map matching or GNSS information.What is GNSS?The GNSS(Global Navigation Satellite System) is a satellite-based navigation system made up of a network of 32 satellites placed into orbit by the Global Positioning System (GPS) of U.S.A, GLONASS of RUSSIA, etc.GNSS works in any weather conditions, anywhere in the world, 24 hours a day.There are no subscription fees or setup charges to use GNSS.About satellite signalsYour unit must acquire satellite signals to operate. If you are indoors, near tall buildings or trees or in a parking garage, the unit cannotacquire satellite signals.Acquiring satellite signalsBefore the unit can determine your current posi-tion and navigate a route, you must do the follow-ing steps:1.   Go outside to an area free from tall obstructions.2.  Turn on the unit.Acquiring satellite signals can take a fewminutes.Initial navigation screenWhen you enter a navigation mode for the firsttime, the caution screen is displayed on thescreen. Read the caution carefully and thenpress [Agree].•• If you want to change the system language, press [Language]. For details refer to page 42(“Language”).•• If there is no operation for 10 seconds in the caution screen the system automatically switches to the navigation screen.
28 Bluetooth® Wireless TechnologyBefore Using the Bluetooth HandsfreeWhat is Bluetooth®Wireless Technology?••Bluetooth ® Wireless Technology refers to a short-distance wireless networking technol-ogy which uses a 2.45GHz frequency to con-nect various devices within a certain distance.••Supported within PCs, external devices, Bluetooth® phones, PDAs, various electronic devices, and automotive environments, Bluetooth ® Wireless Technology to be trans-mitted at high speeds without having to use a connector cable.••Bluetooth® Handsfree refers to a device which allows the user to conveniently make phone calls with Bluetooth® mobile phones through the Multimedia system.••The Bluetooth® Handsfree feature may not be supported in some mobile phones.Precautions for Safe Driving••Bluetooth® Handsfree is a feature that enables drivers to practice safe driving. Connecting the head unit with a Bluetooth® phone allows the user to conveniently make calls, receive calls, and manage the phone book. Before using Bluetooth ® Wireless Technology, carefully read the contents of this user’s manual.••Excessive use or operations while driving may lead to negligent driving practices and be the cause of accidents. Do not operate the device excessively while driving.••Viewing the screen for prolonged periods of time is dangerous and may lead to accidents. When driving, view the screen only for short periods of time.Cautions upon Connecting Bluetooth Phone ••Before connecting the head unit with the mobile phone, check to see that the mobile phone supports Bluetooth® features.••If you do not want automatic connection with your Bluetooth® device, turn the Bluetooth® feature off of the Bluetooth® device.••Park the vehicle when connecting the head unit with the mobile phone.••Some Bluetooth features may occasionally not operate properly depending on the firmware version of your mobile phone. If such features can be operated after receiving a S/W upgrade from your mobile phone manufacturer, unpair all devices and pair again before use.
29Bluetooth ConnectionENGLISHWhen no Phones Have Been PairedPress the   key on the steering wheel or press the   key ▶ Press the OK .Pairing from the Bluetooth® DevicePress the MENU button ▶ Press the Search from device .From the Bluetooth® device, search for the car name and pair the device. When searching from the Bluetooth® device, the car name is  AVANTE and the default passkey is ‘0000’.Pairing from the carPress the MENU button ▶ Press the Search from car ▶ Press the phone name to pair ▶ Press the YES .
30 Bluetooth ConnectionWhen a Phone is Already PairedPress the   key on the steering wheel or press the   key ▶ Press the OK ▶ Press the phone name to pair ▶ Press the YES .NOTE• When a Bluetooth device is connected, a new device cannot be paired. If you want to pair a new phone, first disconnect the connected Bluetooth device.When your phone is connectedPress the   key on the steering wheel or press the   key on the head unit to dis-play the following screen.NOTE• Once Bluetooth connection is successful, the name of the connected mobile phone will be displayed on the phone screen and Bluetooth handsfree functions will be ready to be operated.• Some functions may not be supported due to limited Bluetooth compatibility between the car system and mobile phone.
31Bluetooth PhoneENGLISHMaking/Answering CallsCalling by Dialing a NumberEnter number on the Dial Pad ▶ Press the  button or the key   on the steer-ing wheel.NOTE• If you press the wrong number, press   to delete one digit of the entered number. Press and hold the dial pad 0 "+" to enter a "+".• Press the   button to search phone numbers. For detail, refer to the “Searching for contacts “ on the page 33.Making a Call from Speed DialEnter the 1 or 2 digit speed dial number with the Dial Pad ▶ Press and hold the last number.Calling through RedialPress and hold the   button or Press the   key on the steering wheel twice.NOTE• Redialing is not possible when there is no dialed calls list.Answering a CallIncoming call notice  ▶ Press the button or the   key on thesteering wheel. Rejecting a CallIncoming call notice ▶ Press the button or the   key on thesteering wheel.
32 Bluetooth PhoneOperating Menus during a CallButton  Description1 Ends a call.2 Turns the Mic On/Off.  3 Switches a voice call from the car handsfree to the mobile phone.4 Display dial pad screen for enter-ing ARS numbers.5 3 Way call Ending a CallWhile on a call ▶ Press the   button or the   key on the steering wheel.Switching Call to Bluetooth® PhoneDuring handsfree call ▶ Press the   but-ton or press and hold the   key on the steering wheelDuring call on mobile phone ▶ Press the  button or press and hold the  key on the steering wheelMaking 3 way callWhile on a call ▶ Press the   button. ▶Press phone number you want to make a call ▶Press the   button.1 2 3 4 5
33Bluetooth PhoneENGLISHUsing the Menu ButtonsIn Phone screen ▶ Press the MENU button to use Contacts , Calling list , Favorites , Bluetooth settings .ContactsUpdating Mobile Phone ContactsUp to 5,000 mobile phone contacts can beupdated.In Contacts screen ▶ Press the MENU button ▶ Press the Update .The contacts are deleted and the contactsof the connected phone is updated.Making a call from contactsIn Contacts screen ▶ Press the MENU button ▶ Press the Contacts button ▶ Press the contact you want to call.Searching for contactsIn Contacts screen ▶ Press the MENU button ▶ Press the Search ▶ Enter the name ▶ Press the OK ▶ Press the contact you want to call.
34 Bluetooth PhoneCalling listViewing Calling listsIn Phone screen ▶ Press the MENU button ▶ Press the Calling lists .Press the MENU button on Calling list screen.Button  Description1 All Displays all calling list.2 Missed Displays the missed calling list.3 Received Displays the incoming callinglist.4 Dialed Displays the outgoing callinglist.NOTE• The calling list may not be saved in some mobile phones.FavouritesCalling FavouritesIn Phone screen ▶ Press the MENU button ▶ Press the Favourites ▶ Press the Favourite you want to call.Saving to FavouriteIn Phone screen ▶ Press the Add to favourites button.In Contacts screen or Calling list screen ▶ Press and hold the contact you want to save ▶ Press the Save to Favourites .1234
35Bluetooth PhoneENGLISHDeleting FavouritesIn Favourites screen ▶ Press the MENU button ▶Press the Delete all ▶ Press the OK .In Favourites screen ▶ Press and hold the favourite you want to delete ▶Press the Delete ▶ Press the OK .Changing the Favourites nameIn Favourites screen ▶ Press and hold the favour-ite you want to change ▶ Press the Rename ▶Enter the name ▶ Press the OK .Bluetooth settingsIn Phone screen ▶ Press the MENU button ▶ Press the Bluetooth settings .For details, refer to the “Bluetooth” on the page 40.
36 Car LinkBefore starting Car LinkInstalling the Car Link Application••Install the Car Link application into your mobile phone.••Car Link application automatically turns on Wi-Fi Hotspot of Your mobile phone by press-ing [Connection with navigation] button on connection setting screen of application.••Following screen is displayed when Car Link is ready to connect.••It is not possible to use Car Link feature and Bluetooth Audio at the same time. Bluetooth connection will be disconnected, when Car Link is connected.••iPhone is not supported.••For details, visit the Car Link website (http://www.car-link.co.kr/motrex).Starting modePress the HOME key ▶ Press the Car Link button ▶Press the Agree .
37Car LinkENGLISHCar Link Connection wizardCar Link Connection wizard will start automati-cally and search Wi-Fi hotspots.Press the Hotspot name .Enter the Password ▶ Press the OK .When your phone is successfully connected, the Phone screen is displayed on the screen of device.You can use the Car Link features by adjusting both your mobile phone and the device.Using the Quick MenuPress the screen to display the Quick Menu of the device on the left on the screen. Button  Description1 Activates the Quick menu with on/off button.2 Moves to the home screen of your smart phone.3 Moves to the previous screen. 4 Displays the HOME screen of the device ( HOME key)5 Displays the options window. 12345
38 SetupStarting modePress the   key to display the Setup screen.SoundThis menu is used to adjust the sound effectsfor the whole system.Press the   key ▶ Press the Sound button.Sound BalanceIn Sound settings screen ▶ Press the Sound Balance ▶ Set the desired sound balance.Use the ▲ , ▼ ,   , and   buttons to adjust settings. Press the Reset to restore sound to the center position.Variable EQIn Sound settings screen ▶ Press the Variable EQ ▶ Set the desired mode. Volume setting In Sound settings screen ▶ Press the Volume setting ▶ Set the desired volume.Button  Description1 Phone Controls the volume related tophone.2 Start up Controls the audio volumewhen starting the system.Use the ▲ , ▼ and   buttons to adjust set-tings. Press the Reset to initialize the settings.12
39SetupENGLISHBeepThis menu allows you to play a beep sound whenever you operate the touch screen.In Sound settings screen ▶ Press the Beep to turn on/off.DisplayThis menu allows you to adjust the brightness and set the dimming mode for the whole sys-tem.Press the   key ▶ Press the Display .BrightnessIn Display settings screen ▶ Press the Brightness ▶ Set the desired brightness.Use the ▲ , ▼ and   buttons to adjust set-tings. Press the Reset to initialize the settings.
40 SetupDimming modeThis menu allows you to set the brightness according to mode changes.In Display settings screen ▶ Press the Dimming mode ▶ Set the desired mode. Button  Description1 AutoAdjusts the brightnessautomatically according to sur-rounding brightness.2 Day Brightness level always set onhigh.3 Night Brightness level always set onlow. Bluetooth settingsThis menu allow you to set Bluetooth settings.Press the   key ▶ Press the Bluetooth .Bluetooth connectionThis menu allow you to manage the Bluetooth device list, such as pairing, connecting or delet-ing Bluetooth devices.In Bluetooth settings screen ▶ Press the Bluetooth connection ▶ Set the desired settings.Press and hold  the phone name to disconnect/delete the device.123
41SetupENGLISHRingtoneThe configured ringtone is played through the vehicle speakers when you receive a call.In Bluetooth settings screen ▶ Press the Ringtone▶ Set the desired ringtone.Change passkeyThis feature allows you to change the passkey used for Bluetooth device authentication.In Bluetooth settings screen ▶ Press the Change passkey ▶ Enter the passkey.NOTE• The default passkey is 0000. Changing device nameIn Bluetooth settings screen ▶ Press the Change device name ▶ Enter the name.NOTE• The default device name is  AVANTE.
42 SetupAuto ConnectionThe Bluetooth® device will automatically be con-nected according to the option set when the car ignition is turned on.In Bluetooth settings screen ▶ Press the Auto Connection to turn on/off.SystemPress the   key ▶ Press the System button.LanguageThis menu allows you to set the language of the system.In System settings screen ▶ Press the Language▶ Press the desired language.KeyboardThis option allows you to change the typeof keyboard used within the system.In System settings screen ▶ Press the Keyboard ▶ Press the desired language.
43SetupENGLISHClockIn System settings screen ▶ Press the Clock▶Set the desired settings.Button  Description1 GPS Time Displays time according tothe received GPS time.2 Time set-ting Sets the current time.3 Format Converts the digital clockdisplay to 12 or 24 hours.4 Standby screenTurns on/off the screen displayed when the system power is turned off.5 Standby screen viewSets the type of Standby screen.Factory settingsThis menu allows you to reset settings specified by the user.In System settings screen ▶ Press the Factory settings ▶ Press the desired item ▶ Press the   ▶ Press the YES .12345
44 SpecificationUSB MP3 SpecificationCategory  DescriptionMP3 File Specification  Response Specification: MPEG1 AUDIO LAYER3Recommended Bitrate and Sampling FrequencyResponse Sampling Frequency : 32, 44.1, 48 (KHz)Response Bitrate: 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192 ,224 ,256 ,320 (Kbps)ID3 TAG ID3 v1.1 and ID3 v2.x TAG Detailed Specification••Max Directory Layers: 15 layers••Max length of folder names and file names: 255Bytes••Characters supported for folder/file names: English, Arabic and numbers••Max number of files recognized from one USB device: 5000Video and Image SpecificationCategory  DescriptionFile Format AVI(DivX), MPEGImage Format jpg, gif, bmp, pngExtensions avi, divx, mpg, mpeg, mp4, wmvSupported Image Resolution Max 4000x3000Supported Image File Size Max 4 MbytesSupported image zoom in/out Max 300%Video Codec H.263, MPEG 1/2, MPEG4-ASP, MPEG4-AVC(H.264), VC-1, AVS, VP8Video Resolution1920 x 1080(WMV 9: Max 8Mbps, 1280x720, WMV 8: 640x480)Audio Codec MP3, OGG, WMA …Subtitles SMIUnsupported files••Files not compatible with supported specifications••Modified files (files with modified file formats)••Transformed files (example: AVI files encoded with WMV video codec)••Files without indexes
45Before thinking there is a product defectENGLISHThe current car position as shown on the navigation may differ from the actual position under the following conditions.• When driving on Y-shaped roads with narrow angles, the current position may be displayed in the opposite direction.• Within city streets, the current position may be displayed on the opposite side or on an o-road position.• When changing the zoom level from maximum to a different level, the current position may become displayed on a dierent road.• If the vehicle is loaded onto a ferry or a car transport vehicle, the current position may become stalled on the last position prior to loading.• When entering a road after passing an underground parking structure, building parking structure or roads with many rotations.• When driving in heavy traffic with frequent starts and stops.• When driving under slippery conditions, such as heavy sand, snow, etc..• When the tires have recently been replaced (Especially upon use of spare or studless tires).• When using tires of improper size.• When the tire pressure for the 4 tires are different.• When the replacement tire is worn or used (Especially studless tires having passed a second season).• When driving near high-rise buildings.• When a roof carrier has been installed.• When a long distance route is calculated while driving on an expressway, in such cases, continued driving will automatically enable the system to conduct map matching or use updated GNSS information to provide the current position (In such cases, up to several minutes may be required).Correct route guidance may not occur due to search conditions or driving position. The following occurrences are not malfunctions:• Guidance to go straight may be given while driving on a straight road.• Guidance may not be given even when having turned at an intersection.• There are certain intersections in which guidance may not occur.• A route guidance signaling for a u-turn may occur in some No u-turn intersections.• Route guidance signaling entrance into a No-entry zone may occur (No-entry zone, road under construction, etc.).• Guidance may be given to a position that is not the actual destination if roads to reach the actual destination do not exist or are too narrow.• Faulty voice guidance may be given if the vehicle breaks away from the designated route. (e.g. if a turn is made at an intersection while the navigation provided guidance to go straight.) These situations may occur after conducting route calculation. The following occurrences are not malfunctions:• Guidance may be given to a position diering from the current position when turning at an intersection.• When driving in high speeds, route recalculation may take a longer period of time.
46 Trouble shooting1. Errors which occur during the operation or installation of the device may be mistaken as a malfunction of the actual device.2. If you are having problems with the device, try the suggestions listed below.3. If the problems persist, contact your dealerProblem Possible CauseThere are small red, blue, or green dots on the screenBecause the LCD is manufactured with technology requiring high point density, a pixel or lighting deficiency may occur within 0.01% of total pixels.The sound or image is not working ••Has the Switch for the vehicle been turned to [ACC] or [ON]?••Has the SYSTEM been turned OFF?The screen is being displayed but sound is not working••Has the volume been set to a low level?••Has the volume been muted?When the power is turned on, the corners of the screen are dark••The display appearing somewhat dark after prolonged periods of use is normal with LCD panels. It is not a malfunction.••If the screen is very dark, contact your nearest dealer for assistance.Sound is working from only one speaker Are the positions of Fader or Balance sound controls adjusted to only one side?Sound does not work in AUX mode Are the audio connector jacks fully inserted into the AUX terminal?The external device is not working Is the external device connected with a standard connector cable?When turning power on, the most recent mode screen is not displayedWithin modes that play files by reading external sources, such as USB, iPod, or Bluetooth® streaming mode, the most recently played mode screen prior to turning off power may not properly load.••If the corresponding device is not connected, the mode operated prior to the most recent mode will operate.••If the previous mode still cannot be properly played, the mode operated prior to that will operate.
47Trouble shootingENGLISHProblem  Possible Cause CountermeasureThe power does not turn on.The fuse is disconnected. ••Replace with a suitable fuse.••If the fuse is disconnected again, please contact your point of purchase or service center.Device is not properly connected. Check to see that the device has been properly connected.The system does not play. The vehicle battery is low. Charge the battery if the problem persists, contact your point of purchase or service center.The image colour/ tone quality is low.The brightness, and contrast levels are not set properly. Properly adjust the brightness, and contrast levels through Display Setup.Sound does not work.The volume level is set to the lowest level. Adjust the volume level.The connection is not proper. Check to see that the device has been properly connected.The device is currently fast-forwarding, rewinding, scanning, or playing in slow mode.The sound will not work when the device is fast-forwarding, rewinding, scanning, or playing in slow mode.
48 Trouble shootingProblem  Possible Cause CountermeasureThe sound or image quality is low.Vibration is occurring from where the conversion switch has been installed. The sound may be short circuited and the image distorted if the device vibrates.Image colour/tone quality is low. The device will return to normal once vibrations stop.The USB does not workUSB memory is damaged. Please use after formatting the USB into FAT 12/16/32 format.USB memory has been contaminated. Remove any foreign substances on the contact surface of the USB memory and multimedia terminal.A separately purchased USB HUB is being used. Directly connect the USB memory with the multimedia terminal on the vehicle.A USB extension cable is being used. Directly connect the USB memory with the multimedia terminal on the vehicle.A USB which is not a Metal Cover Type USB Memory is being used. Use standard USB Memory.An HDD type, CF, SD Memory is being used. Use standard USB Memory.There are no music files which can be played.Only MP3, WMA file formats are supported. Please use only the supported music file for-mats.The iPod is not rec-ognised even though it has been connectedThere are no titles which can be played. Use iTunes to download and save MP3 files into the iPod.The iPod firmware version has not been properly updated. Use iTunes to update the firmware version and reconnect the iPod with the device.The iPod device does not recognise downloads. Reset the iPod and reconnect with the device.
49Limited WarrantyENGLISHLIMITED WARRANTY ORIGINAL NAVIGATION HEAD UNITProduct : Product No. : WHAT THIS WARRANTY COVERS 1. Vehicle Dealer Shop (“Dealer”) warrants to you that the Hardware will be free from defects in workmanship and materials under Normal use (“Defects”) from the original date of the registration of the motor vehicle (“Warranty Period”). During the Warranty Period the Hardware will be repaired or replaced at DEALER’s choice (“Limited Warranty”) without charge to you for either parts or labor. This Limited Warranty covers the replacement of the head unit including of the Hardware only. Period Warranty  Mileage Warranty 3years  60,000 Km *Whichever Occurs earlier.*The term of the warranty shall commence from the date of delivery of the new vehicle to the first purchaser.WHAT THIS WARRANTY DOES NOT COVER 2. The Limited Warranty does not apply to normal wear and tear, does not apply when the Hardware is opened or repaired by someone liquids, proximity or exposure to heat and accident, abuse, non-compliance with the instructions supplied with the Hardware, neglect or misapplication. The Limited Warranty does not cover physical damage to the surface of the Hardware. This Limited Warranty does not cover any software that may accompany or be installed on the Hardware. The Limited Warranty does not cover the installation, removal or maintenance of the Hardware or any costs related herewith.HOW TO MAKE A WARRANTY CLAIM3. In order to make a claim of a Defect, you must contact DEALER. If a defect arises and a valid claim under this Limited Warranty is received by DEALER after the first 3yrs/60,000 km of the Warranty Period, DEALER is entitled to charge you for any reasonable shipping and handling costs made in connection with the repair or replacement of the Hardware. You must comply with any other return procedures stipulated by DEALER, if any.
50 Limited WarrantyDEALER LIMITED WARRANTYYOUR LEGAL RIGHTS4. Some countries may not allow the exclusion or limitation of damages. If any part of this Limited Warranty is held to be invalid orunenforceable, the remainder of the Limited Warranty shall nonetheless remain in full force and effect.5. This Limited Warranty is the only express warranty made to you and is provided in place of any other express warranties or similar obligations (if any) created by any advertising, documentation, packaging, or other communications.6. Except for the Limited Warranty and to the maximum extent permitted by applicable law, DEALER and its suppliers provide the Hardware “AS IS AND WITH ALL FAULTS”, and hereby disclaim all other warranties and conditions, whether express, implied or statutory, including, but not limited to, any (if any) implied warranties, duties or conditions of satisfactory quality, of fitness for a particular purpose, of reliability or availability, of accuracy or completeness of responses, of results, of workmanlike effort, of lack of viruses, and of reasonable care and skill, all with regard to the Hardware, and the provision of or failure to provide support or other services, information, software, and related content through the Hardware or otherwise arising out of the use of the Hardware. Also, there is no warranty or condition of quiet enjoyment, quiet possession, or non-infringement with regard to the Hardware.7. This Limited Warranty does not affect any legal rights under applicable national legislation governing the sale of consumer goods.8. This Limited Warranty cannot be transferred to any other person.LIMITATION OF LIABILITY9. Neither DEALER nor its suppliers shall be liable to you or to any third party for any damages either direct, indirect, incidental, consequential or otherwise (including in each case, but not limited to, damages for the inability to use the equipment or access data, loss of data, loss of business, loss of profits, business interruption or the like) arising out of the use of or inability to use the Hardware even if DEALER has been advised of the possibility of such damages.10. Notwithstanding any damages that you might incur for any reason whatsoever, the entire liability of DEALER and any of its suppliers shall be limited to the amount actually paid by you for the Hardware.11. DEALER shall not be liable for (I) any fraud on the part of its employees and/or agents; or(I) any fraudulent misrepresentation on the part of its employees and/or agents.12. Notwithstanding the above, neither party’s liability for death or personal injury resulting from its own negligence shall be limited.
<FCC 15C Statement>: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation.Caution: Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment.This appliance and its antenna must not be co-located or operation in conjunction with any other antenna or transmitter.A minimum separation distance of 20 ㎝ must be maintained between the antenna and the person for this appliance to satisfy the RF exposure requirements.

Navigation menu