MIP Telecom COMBOX VoIP Gateway User Manual Combox Eng ver1

MIP Telecom Inc. VoIP Gateway Combox Eng ver1

Users Manual

WWW.MIPTEL.COMMIP0201000B1Combox™User Manual(Preliminary Release)Multi-services over Internet Protocol
WWW.MIPTEL.COMMIP0201000B2MIP Telecom Standalone VoIP GatewayModel Combox™H.323 / SIP Dual ModeQuick Start GuideMIP Telecom Combox™This publication may not be reproduced, in whole or in part, without prior expressed written permission from MIP Telecom, Inc. All rights reserved.Copyright ©2002, by MIP Telecom, Inc.MIP Telecom, Inc. makes no representations or warranties withrespect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose.Furthermore, MIP Telecom, Inc. reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of MIP Telecom, Inc. to notify any person or organization of such revisions or changes.Record of RevisionsRevision DescriptionA Initial Release.(04/15/02)TRADEMARKTrademarks of MIP Telecom, Inc. are the MIP Telecom and MIP Telecom Combox™logo.Windows is registered trademarks of Microsoft.MIP Telecom, Inc.2F KMIT Building 829-1 Yeoksam 1 Dong Gangnam Gu, SeoulKorea, 135-936Phone: (82) 2-557-3399Fax: (82) 2-554-3303http://www.miptel.com
WWW.MIPTEL.COMMIP0201000B3ContentsIntroduction ……………………............................................. 4Related Documentation ............................................................ 5Installing Your Combox™ ....................................................... 5Installing and Configuring Your Combox™............................ 5Unpacking Your Combox™..................................................... 6Cabling Your Combox™.......................................................... 6Cabling Procedure ……............................................................ 6Configuring Your Combox™................................................... 8Combox™Configuration........................................................ 10Limited Warranty ................................................................... 15Technical Support ................................................................... 15FCC Declaration …................................................................. 16
WWW.MIPTEL.COMMIP0201000B4Combox™Quick Start GuideIntroductionWelcome to MIP Telecom's stand-alone VoIP Gateway, the Combox™ . The Combox™allows analog voice and fax communication over an IP network. MIP Telecom’s voice/fax gateway technology allows voice/fax communication to be transmitted, with no additional expense, over your existing IP network, which has traditionally been data-only. To access this free voice and fax communication, all you have to do is connect the Combox™to your telephone equipment, and then to your existing Internet connection. Once configured, theCombox™then allows voice and fax to travel down the same path as your traditional data communications.The Combox™ supports the H.323 and SIP standards-based protocolenabling your Combox™to communicate with other third-party VOIP Gateways or other endpoints that support the H.323/SIP protocols, such as Microsoft MSN Messenger. < Figure 1. Combox™ >
WWW.MIPTEL.COMMIP0201000B5IntroductionThe Combox™has one PSTN, one Phone Line, a 10 Mbps Ethernet LAN interface, and an WAN port.Related DocumentationThe Combox™Quick Start Guide is intended to be used by General users. This Quick Start Guide provides the necessary information for an end user to unpack, cable, load, and configure the unit for proper operation.The detailed MIP Telecom Combox™User Guide which provides in-depth information on the features and functionality of MIP Telecom’s Combox™. is available from MIP Telecom’sWeb site:http://www.miptel.comViewing and printing a user guide from the Web also requires that you have the Acrobat Reader loaded on your system. To select the Combox™User Guide from the MIP Telecomhome page. VOIP Quick Start GuideInstalling Your Combox™The basic steps of installing your Combox™network involve unpacking the units, connecting the cables, and configuring the units thru web browser. This process results in a fully functional Voice Over IP network. A brief description is provided below withdetailed instructions provided later.Installing and Configuring Your Combox™The user must first configure each Combox™for its specific function.During the configuration process, it’s important to note that the Phone Directory is configured differently depending onwhether or not you have Gatekeeper support on your VOIP network.If your VOIP network supports a H.323 Gatekeeper, you must register all H.323 endpoints with the Gatekeeper. If your VoIP network supports a SIP server, you must register all SIPUAs with the SIP server.
WWW.MIPTEL.COMMIP0201000B6CablingCabling Your Combox™Cabling your Combox™involves making the proper Power,WAN Port, LAN connection, PSTN and Phone. Figure 2.2 shows the back panel connectors and the associated cable connections.The Cabling Procedure section provides step-by-step instructions for cabling your Combox™ .Cabling Procedure1. Using the supplied cable, connect the power supply to a live AC outlet, then plug the power supply into the Combox™as shown in Figure 2.2.< Figure 2. Unpacking >Unpacking Your Combox™Remove all items from the box. (See Figure 2.)
WWW.MIPTEL.COMMIP0201000B72. Connect the Combox™to a PC using the RJ-45 cable provided with your unit. Plug the RJ-45 end of the cable into the LAN port of the Combox™and connect the other end to the PC’s LAN port (Figure 2.2).3. Connect a network cable to the WAN connector on the back of the Combox™. Connect the other end of the cable to your network.4. Connect a RJ-11 cable to the Line and the other end to the PSTN. If you are connecting a station device such as an analog telephone, fax machine, or Key Telephone System (KTS)to your Combox™, connect an RJ-11cable to the Phone connector on the back of the Combox™and the other end to the station device.5. Turn on power to the Combox™by plugging-in the adaptor. Wait for the Boot LED onthe Combox™to go off before proceeding. This may take a couple of minutes.WAN LAN LINE PHONEPOWER<Figure 2.2. Cable Connections>
WWW.MIPTEL.COMMIP0201000B8Configuring Your Combox™Windows XP1. Choose Start, Control Panel. ( Figure 3.3.1)2. Choose Network and Internet Connections (Figure 3.3.2)3. Choose Network Connections (Figure 3.3.3)4. Click Local Area Connection(Figure 3.3.4)5. Click property Select Internet protocol (TCP/IP) under General Tap. (Figure 3.3.5)6. Click PropertySelect “Use the following IP Address”. Then type in below. (Figure 3.3.6)IP Address: 192.168.1.2Subnet Mask: 255.255.255.0Default Gateway: 192.168.1.17. Click OK ( Figure 3.3.7)Go to Combox™Configuration<Figure 3.3.1> <Figure 3.3.2><Figure 3.3.3>
WWW.MIPTEL.COMMIP0201000B9<Figure 3.3.4> <Figure 3.3.5><Figure 3.3.6><Figure 3.3.7>
WWW.MIPTEL.COMMIP0201000B10Combox™ConfigurationYou can configure your MIP Telecom Combox™by using the web configuration page. Follow these steps:Step 1 Make sure that the PC and the MIP Telecom Combox™are already networked and visible to one another. Step 2 Open your web browser.Step 3 Enter the URL of your configuration page. For example, the configuration page for a MIP Telecom Combox™ with the IP address 192.168.1.1 is:http://192.168.1.1
WWW.MIPTEL.COMMIP0201000B11<Figure 4.1> <Figure 4.2>Step 4 Select the values for the items that you want to configure.1. Key in ID:lsgw and Password:lsgw11111 (Figure 4.1)2. Click Enter Configuration on Configuration Wizard ( Figure 4.2)3. Provide required info based on your Internet Connection on Configuration Wizard 1/5. Click Next ( Figure 4.3)4. Provide required info on Configuration Wizard 2/5. Click Next ( Figure 4.4)5. Enter “ISN Number”and Protocol specification provided by your ITSP on Configuration Wizard 3/5. If you make an Point-to-point call without an ITSP, Select No on H.323/SIP Configuration. (Figure 4.5)6. Numbering rule is available if you don’t want to go thru gatekeeper and SIP server. Click next ( Figure 4.6)7. NAT Setup function is an option. Please contact application service providers to getmore info. Otherwise, click next. ( Figure 4.7)8. Click “Save & Restart”on Configuration Wizard 5/5. Click Next( Figure 4.8)9. Reboot. ( Figure 4.9)Step 5 Click Reboot to save your changes.
WWW.MIPTEL.COMMIP0201000B12<Figure 4.3> <Figure 4.4><Figure 4.5> <Figure 4.6>
WWW.MIPTEL.COMMIP0201000B13<Figure 4.7> <Figure 4.8><Figure 4.9>
WWW.MIPTEL.COMMIP0201000B14Making a CallNote :The dial plan described in these instructions is the default plan. You can configure your MIP Telecom Combox™to use a different plan. Follow these steps to make a call:Step 1 Lift the telephone handset. Step 2 Dial as you normally do. Tips If you want to send the dial string out immediately, without waiting for the 2-to 4-second timeout, press # after the last digit.If the called party is available, you will hear ringing.Step 3 When the called party answers, speak normally.Step 4 Hang up when finished.You can cancel or discontinue your call at any time by hanging up the handset.
WWW.MIPTEL.COMMIP0201000B15Limited WarrantyMIP Telecom, Inc. (“MIP”) warrants that its products will be free from defects in material or workmanship for a period ofone years from the date of purchase, or if proof of purchase is not provided, one years from date of shipment. MIP MAKES NO OTHER WARRANTY, EXPRESSED OR IMPLIED, ANDALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBYDISCLAIMED. This warranty does not apply to any products which have been damaged by lightning storms, water, or power surges or which have been neglected, altered, abused, used for a purpose other than the one for which they were manufactured, repaired by the customer or any party without MIP’s written authorization, or used in any manner inconsistent with MIP’s instructions.MIP’s entire obligation under this warranty shall be limited (at MIP’s option) to repair or replacement of any products whichprove to be defective within the warranty period, or, at MIP’soption, issuance of a refund of the purchase price. Defective products must be returned by Customer to MIP’s factorytransportation prepaid.MIP WILL NOT BE LIABLE FOR CONSEQUENTIAL DAMAGES AND UNDER NO CIRCUMSTANCES WILL ITS LIABILITY EXCEED THE PURCHASE PRICE FOR DEFECTIVE PRODUCTS.Technical SupportMIP Telecom, Inc, Systems has an excellent staff of technical supportpersonnel available to help you get the most out of your MIP product. If you have any questions about the operation of this unit, or experience difficulty during installation you cancontact Tech Support via the following:Phone:(82)2-557-3399Internet: http://www.miptel.comPlease have your product information available, including model and serial number.
WWW.MIPTEL.COMMIP0201000B16FCC DeclarationNOTE: This equipment has been tested and found to comply withthe limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates,uses and can radiate radio frequency energy, and if not installedand used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in whichcase the user will be required to correct the interference at his own expense.Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Navigation menu