MET MTYH555 Clock Radio with NFC User Manual

MET INDUSTRIAL LTD Clock Radio with NFC

User Manual

MCB328 v2185-01MicrophoneNFC Connection AreaDC Power PortPlay/Pause/Pair Bluetooth Press and hold to begin pairing to a Bluetooth device (Bluetooth Mode). Press to play or pause audio (Bluetooth Mode).Power/SourcePress and hold to power audio features ON or OFF.Press to change audio mode. Snooze/Sleep/DimmerPress and hold to dim the display.Press to set the sleep timer.Press to Snooze alarm after it has sounded.AL1/AL2Press to set alarm times.Source Mode IndicatorsFM / Bluetooth / Aux InAux In (3.5mm audio input)Backup Battery Compartment (requires CR2032 battery)Volume Up/DownAlarm On/Off IndicatorLow Battery Indicator (Battery Backup)PM IndicatorDaylight Savings Time IndicatorDaylight Savings TimePress and hold to move the time 1 hour ahead or behind.Time ZonePress and hold to begin setting Time Zone. Press to cycle through different zones (see Time Zone instructions).Clock/PresetPress and hold to set the clock.Press to cycle through radio presetsSkip Track/Hour/MinutePress to Skip audio tracks (Bluetooth Mode).Pres to adjust the time when setting the clock.USB Charging PortSpeakerFeatures• NFC & Bluetooth wireless - range: 60 ft.• Built-in speaker• Microphone for hands free speakerphone operation• Built-in FM radio with up to 20 radio presets• Digital clock• 1.8˝ Blue LED display• Aux In (3.5mm audio input)• 5V 2A USB power port for mobile device fast charging• Battery backup - requires CR2032 button cell batteryClock Radio with NFCIncludes• AC/DC power adapter• WarrantyClock Power & Mobile Device ChargingPlug the AC/DC power adapter into a standard power outlet and the DC power input on the rear of the clock to power it on.Mobile devices can be charged by connecting them to the USB charging port on the rear of the clock. Power output is 5V 2A.Aux InRequires a 3.5mm audio cable (not included). 1. With the unit powered ON, connect a 3.5mm audio cable to the Aux In port. Press the Source button to switch to Aux-In Mode.2. Use the controls on the connected device to play audio through the unit.Setting an Alarm1. With the radio off, press and hold the AL1 or AL2 buttons to set the time for Alarm 1 or Alarm 2. The display will ash and show the time the alarm is set to go off. Press the Hour/Min buttons to adjust the time. Note the PM indicator.2. Press the AL1/AL2 buttons again to set a weekly alarm schedule. 1-7 rings Mon-Sun | 1-5 rings Mon-Fri | 6-7 rings Sat-Sun3. After the alarm is set and the display has stopped ashing, press the AL1/AL2 buttons again to select the alarm type (Buzzer or Radio). Press once more to deactivate the alarm entirely. Note the Alarm ON/OFF indicators.Alarm Details• To cancel the alarm after it has sounded, press the AL button of the alarm that is sounding.• To delete the alarm, press the AL button of the alarm you wish to cancel until the indicator on the display turns OFF. Sleep Timer• Press the Snooze button once to set the Sleep Timer. Press again to adjust the time in 10 minute intervals from 90 to 0 (OFF).ClockWhen the clock is plugged in, the correct time will be displayed after a few seconds.Setting the Clock Manually1. Press and hold the Clock button. The display will begin ashing.2. Use the Hour/Minute buttons to set the time. Note the PM indicator.Daylight Savings TimePress and hold the DST button to adjust the time one hour ahead or behind for Daylight Savings Time.Time ZonePress and hold the Time Zone button to begin setting the desired time zone. The display will begin ashing, press the Time Zone button repeatedly select the appropriate zone.Bluetooth WirelessPairing to a Bluetooth Device and Playing Audio1. Press and hold the button, a voice prompt will sound from the speaker indicating that the unit is in Bluetooth Mode and connecting. When pairing, remain within 3 feet of the unit.2. Using the controls on your Bluetooth device, select MCB328 from your Bluetooth settings to pair. When successfully paired, the voice will announce the successful connection. Refer to the user’s manual for your specic device for more detailed instructions on pairing and connecting Bluetooth devices. 3. Audio played through the connected Bluetooth device should now be heard through the speaker. Use the controls on the connected Bluetooth device to select and begin playing audio. Play, pause or skip audio using the controls on the device or the unit.Speakerphone• To accept or end a phone call coming through the connected Bluetooth phone, press the button on the speaker. • To decline a call, press the button twice.Previously Connected Devices• This unit can remember multiple Bluetooth devices and will always try to reconnect to the last device used.• To reconnect to a different device, turn off Bluetooth on unwanted devices, then access the Bluetooth settings menu on the device you wish to use and connect to MCB328.• If the unit should become unpaired or will not connect normally, delete the unit for your device's Bluetooth settings menu ("Forget This Device"), turn the unit off and on again, and perform the Bluetooth connection again.NFC ConnectionsNote: Refer to your specic device’s manual for general information, and instructions on how to check for NFC availability and turn the feature on.1. Press the Source button to set the unit to Bluetooth mode.2. After activating your mobile device's NFC, lightly touch your device to the NFC logo on the unit and hold it there for several seconds. The unit will connect to your mobile device automatically.3. When successfully paired and connected, the Bluetooth Indicator on the display will turn solid .4. After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device.FM RadioNote: This unit has a built-in FM antenna. To improve radio reception, adjust the position of the unit.1. Press the Source button to switch to FM Mode. A voice prompt will sound from the speaker and the display will show the radio frequency.2. To automatically scan radio frequencies and set presets, press and hold the button. When nished, press the Preset button to change presets.3. To manually set presets, press the Preset button to select a preset (1-20). Tune the radio frequency with the Skip buttons, then press and hold the Preset button to set it. 1Atlantic Time UTC-4 hrs 5 Pacic Time UTC-8 hrs2Eastern Time UTC-5 hrs 6 Alaska Time UTC-9 hrs3Central Time UTC-6 hrs 7 Hawaii - Aleutian Time UTC-10 hrs4Mountain Time UTC-7 hrs
FCC StatementThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference, and2. This device must accept any interference received, including interference that may cause undesired operation.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.• responsible for compliance could void the user’s authority to operate the equipment.Important Safety Instructions• Read Instructions - All the safety and operating instruction should be read before the product is operated. • Retain Instructions - The safety and operating instruction should be retained for future reference. • Heed Warnings - All warning on the product and in the operating instructions should be adhered to.• Follow instructions - All operating and use instructions should be followed.• Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Clean only with a dry cloth.• Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards.• Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement, or near a swimming pool, and the like. liquids, such as vases, shall be placed on apparatus.• Accessories - Do not place this product on an unstable cart, stand tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. • A product and cart combination should be moved with care. Quick stops, excessive force, • Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction have been adhered to.• Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instruction.• Grounding or Polarization - This product may be equipped with a polarized alternating current only one way. This is a safety fully into the outlet, try reversing the plug. If the plug should purpose of the polarizes plug.• Power-Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and point where they exit from the product.• Protective Attachment Plug - The product is equipped with an attachment plug having overload protection. This is a safety feature. See Instruction Manual for replacement or resetting of protective device. If replacement of the plug is required, be sure the service overload protection as the original plug.This symbol, located on back or bottom of the unit, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.This symbol, located on back or bottom of the unit, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. This product meets and complies with all Federal regulations.• Outdoor Antenna Grounding - If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna-discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. • Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. • Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with hem might be fatal.• Overloading - Do not overload wall outlets, extension cords, or integral convenience • Object and Liquid Entry - Never push objects of any kind into this product through openings electric shock. Never spill liquid of any kind on the product.• Servicing - Do not attempt to service this product yourself as opening or removing covers personnel.• Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and operation. e) If the product has been dropped or damaged in any way, and f) When the product exhibits a distinct change in performance - this indicates a need for service.• Replacement Parts - When replacement parts are required, be sure the service technician hazards.• Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.• Wall or Ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the manufacturer.• Heat - The product should be situated away from heat sources such as radiators, heat • Main plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely.• Excessive sound pressure from earphones and headphones can cause hearing loss.• Customer Support• Customer Service: 1-888-999-4215• Email Support: prodinfo@dpiinc.com• Email Parts: partsinfo@dpiinc.comCopyright © 2018 Digital Products International (DPI, Inc.) All other trademarks appearing herein are Battery Warnings • WARNING: Do not ingest battery, Chemical Burn Hazard.• If the remote control supplied with this product contains a coin/button cell battery and the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. • Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. • If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.• CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.• WARNING: There is a danger of explosion if you attempt to charge standard Alkaline batteries in the unit. Only use rechargeable NiMH batteries.• • Do not mix old and new batteries. • Completely replace all old batteries with new ones.• Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.• Batteries should be recycled or disposed of as per state and local guidelines.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.•

Navigation menu