M3 Mobile MC-7500S GSM Phone with Bluetooth User Manual

M3 Mobile Co., Ltd GSM Phone with Bluetooth

Contents

MC 7500S User manual

2NotezThis manual is subject to copyright protection along with all relevant rights.zNo part of this document can be copied, reproduced, changed or translated in whole or in part by any means without prior written consent of MOBILECOMPIA Co., Ltd. zThe content of the manual is provided “as-is” and be subject to change at any time without notice. zMOBILECOMPIA Co., Ltd. makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. zMicrosoft, ActiveSync, Windows, Windows logos, Windows Mobile 5.0 logos are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. Microsoft OEM products are licensed by Microsoft Licensing Inc., a entirely owned subsidiary of Microsoft Corporation. zAll other product names in this document or product are company names, trademarks or registered trademarks of the respective owners.
3Copyright and AgreementzThis user manual is provided “as-is”. It may contain editing error or omitting due to the difficulty of expressing technical feature. zIf an application program provided by other supplier using by M3 SKY, refer to the supplier for a program manual.zThe application program providers have the responsibility of indicating their contact number for customer service on M3 SKY terminal, item box, or program.zMobileCompia Corporation do not warranty any programs produced and added by the third software companies after M3 SKY products are distributed from factories. zMobileCompia Corporation has the right to ask warranty of any programs to the program providers to meet the needs of mobile networking companies. zThe contents in the user’s manual are protected under the Software Copyright Act. Copy, reproduction, distribution of the contents in the user’s manual without any written agreement notice of MobileCompia Co. Ltd., is considered as criminal actions.zWindows, MS Office, Outlook, ActiveSync, Internet Explorer programs are the registered brand of Microsoft.zM3 SKY is the registered brand of MobileCompia Co. Ltd. zThe brands of other products and service referred in this manual belong to corresponding providers.
4Caution when using M3 SKY (1)zUser Caution –When the unit is lost or stolen, notify to network provider immediately.–Do not rent the unit to third person without authorized permission. –Do not use the unit while driving. –For technical help, contact designated service centers. –Contact responding suppliers directly for questions on applications and work programs other than hardware and basic installed applications. –Use supplied adapter and accessories by MobileCompia Co. Ltd.–Any defect on a unit while using other batteries, chargers and accessories can not get warranty. zCarrying and Storage Caution –Avoid to use the device under high temperature and humidity. It may cause fatality to the device.–Avoid intentional dropping from high elevation. It may cause fatality to the device. –Charge batteries fully before the first time use of the device.
5Caution when using M3 SKY (2)zDo not reconstruct –Do not reconstruct M3 SKY for any purpose. –It may cause fire in the unit, and wound or electric shock to users. –Any defect caused by reconstructing units, can not get warranty.zIllegal copy of mobile phone is prohibited–The person who reproduces mobile phone and uses this mobile phone is considered as criminals.–The use of lost or stolen mobile phone is considered as a criminal act. –Keeping the lost or stolen mobile phone after turning power off, is considered as a criminal act.
6Used frequency bandGSM 850 (TX) 824 ~ 849 MHz / (RX) 869 ~ 894 MHzGSM 900 (TX) 880 ~ 915 MHz / (RX) 925 ~ 960 MHzGSM 1800 (TX) 1710 ~ 1785 MHz / (RX) 1805 ~ 1880 MHzGSM 1900 (TX) 1850 ~ 1910 MHz / (RX) 1930 ~ 1990 MHzBand width 200 KHzExternal appearance 78.6 x 163.5 x 24.9mm (Width x length x height)Weight 320gTransmission output power Maximum 0.3WMain body -10 ⳃ~ +50 ⳃOperationalTemperature Adapter -10 ⳃ~ +50 ⳃRelative Humidity 5% ~ 80%AC Power Input : AC 100 ~ 250V, 50 ~ 60HzOutput : DC +5.2V, 3.0ASize and FeaturesSupported Frequency Bands can differ depending on the supplied antenna.
7ContentsCONTENTSzNote 2zCopyright and Agreement 3zCaution when using M3 4zSize and Features 61. M3 Introduction 9Product Composition 10Name and function of each part 12Input Buttons 13Soft/Hard Reset 14How to use stylus pen 15LED/Battery attaching/detaching 16Charging 17How to connect to PC 182. Basic Usage 19Calibration 20Main screen 23Input screen 243. ActiveSync 29ActiveSync Introduction 30Installing ActiveSync 31Synchronization of data 32
CONTENTS4. How to use internet 33Via GPRS/EDGE 34Via Wireless LAN 36Browsing the Web Site 395. How to use the Phone 44Init Screen 45Phone Control 46Phone call and receive 47Phone book 48SMS send and receive 49Phone function 51Phone setting 52Contents6. Usage of Device 53Camera 54Bluetooth 58IrDA 63GPS 64Scanner 66
91. IntroductionProduct CompositionName and Function of each partInput ButtonsSoft/Hard ResetHow to use Stylus penLED Battery Attaching/DetachingChargingHow to connect to PC
Product Composition (1)zAt the first time of opening the product box, please check if it contains all the basic components, listed as following.IntroductionM3 SKY main terminal + 2 units of standard battery Cradle + USB cable CD + ActiveSync 4.xEar Mic Phone + 2 units of Stylus penPortable Adapter10 The product components may differ depending on the supplied products.
zHow to use the manual–This manual provides detailed information to make using the device easier and faster.–The content related to phone or communication in this manual is only applicable when the device is equipped with GSM/GPRS/EDGE module for Voice and Data communication.–The features described in this manual can not be used when it is not equipped in the device (e.g. GSM, WLAN, Bluetooth, IrDA, Scanner, Camera, GPS). –The content of this manual is subject to change without prior notice due to product improvement or modification of its functions, etc.Product Composition (2)Introduction11
Name and function of each partIntroduction12Volume ButtonAntennaScanner ButtonBCBattery LockBatteryEInfrared CommunicationPort (IrDA)Key PadCharge & USB/serial portUpper (portable)Lower (Cradle) useCharge Ramp (Left)GSM/GPRS/EDGE StatusRamp (Center)Scanner Ramp (Right)LCD touch ScreenReset SwitchPistol Grip ConnecterEFDStylus PenBBarcode Scanner WindowCMini SD Extension SlotEar Mic PlugDFlashCameraFSIM Card SlotCamera Button
Component DescriptionPress to toggle the device on/off.Power buttonLong press to menu (Backlight, Display, etc) Function Phone/Call function press to accept the call or to execute the phoneEnd function press to hang-up/reject the call.Input keys Press to input alphabet characters or numbersLeft, right function button press to lunch an assigned application or functionAlphanumeric press to switch between alphabet and number inputStart button Press to display the Start menu.Backspace button press to move backFunction button press to Function Key with (*, 0, #)Direction button press to move left,right and up,downReturn button press to confirm the actionScanner button Press to launch the barcode data scan applicationCamera button Press to launch the Pictures & VideosVolume button Press the top key to increase volume, press the bottom key to decrease volume.Input ButtonIntroductionPower buttonInput keysAlphanumericbuttonPhone/Call button End buttonLeft, right function buttonDirection ButtonStart buttonFunction buttonBackspace buttonReturn buttonVolume Button13Scanner ButtonCamera ButtonSome key functions might not be supported, depending on the option.
zSoft Reset- A soft reset allows your device to get a fresh start,similar to rebooting a computer. - This restarts your device and adjusts memory allocation. - All records and entries are retained after a soft reset.- Unsaved data in open programs may in some cases belost.14IntroductionSoft/Hard ResetⴗⴘⴙPress ⴗ+ⴘand ⴙpower buttonzHard Reset- A hard reset removes power to your device. - This erases all records and entries, deletes all additionalprograms you have installed, and restores the device’s defaultfactory settings. - Never perform a hard reset unless a soft reset does not correctyour problem. zTo perform a hard reset :ÆPress the power button for more than 12 seconds to turn off the power (can be confirmed by LCD off)ÆWhile pressing call and end button, please press the power button shortly. ÆWhen the [CLEAN BOOT WARNING] window will pop up with message “All data will be lost! Do you want to continue?”“1. YES 0. NO, please press 1 to perform the Hard Reset.Please mind that you need to set up the standard timezone date, and time. After power off.
15How to use Stylus PenIntroductionzLong PressLeave Stylus pen touching the screen for long and you can select the menuon the pop-up screen. You can also select functions availablein the designated item using the pop-up menu.The function of the pop-up menu canbe different according to the program.zDragIt is used when you select the text. Please drag the desired part with stylus pen attached on the screen.zTapTap the touch screen one time using a Stylus pen to select and execute items and files.
16LED / Battery attaching/detachingIntroductionzLED Alarm–Informs Charging, Scanner Status. Type LED Status DetailsLED for chargingRedGreenChargingCharging completeGSM/GRPS StatusLEDBlue BlinkingBlue OnBlue OFFGSM/GPRS Standby (within range of phone/internet)GSM/GPRS in use (phone/SMS/internet in use)GSM/GPRS is off or out of rangeScanner LED Green When the barcode data is successfully readzBattery attaching/detaching–Attaching BatteryAs picture shown, put the battery pack to back of PDA, and lock the battery pack with locking device.–Detaching BatteryPress locking device to the right, then using upper notch, detach the battery from main body.
17IntroductionzConnect plug-in from charger to charge jack of main body, or charge jack of cradle, and then place main body onto cradle.zCharging LEDzWhen charging, the status of the battery attached to main body can be confirmed by the LED left of upper corner of main body. Also the status of Sub-battery can be confirmed by the LED right of low corner of Cradle.Type LED Status DetailsChargingDirect charging to main bodyRedGreenChargingCharging CompleteCradle Charging(Extra battery charging)RedGreenChargingCharging CompletezCharging in CradlezCharging using portable adapterSeparate BatteryMain body Charging LEDSeparate BatteryCharging LEDDo not use any other charger except one (5.2 V / 3A) provided .Make sure to handle it gentle; damage with excessive force may cause no warranty.Incongruent change of battery can cause the explosion.When attached battery is completely discharged, plug charger to main body, then resetthe device to check if screen is back on. To use, do at least 10 minute charging.
18How to connect to PCzA cradle of M3 SKY supports charging and USB connection.zConnecting step of cradle of M3 SKY is as following.–Connect charger to USB cradle. (24pin connector)–Connect charger to power source. (to wall) –Connect USB cable of USB cradle to USB port of desktop PC. –Place M3 SKY onto docking cradle then execute Synchronization with Desktop PC.zThe location of USB port can be at the back, front or side of PCand the shape of USB port is identical on Desktop PC and Notebook.zUSB host function is available by putting USB cable into USB port of Cradle. Connecting to CradleUSB Host/ClientAC PowerUSB Host/Clientchangeover switchHCIntroduction
192. Basic UsageCalibrationMain screenInput Screen
zCalibrate the touch screen as shown below, at first time use or when cold (hard) booted.20Calibration (1)Basic UsageTap the screen one time witha Stylus penTap the (+) mark with the Stylus pen as it moves around.You can see the screen howto use the Stylus. If youdon't need it, click the Skip.ⴗPress and hold the Stylus pen on the screen thenselect the Cut on the pop-up menu.ⴘPress and hold the Stylus pen like the arrow on screen,Tap the Paste on the pop-up menu.ⴙWhen all processes are complete, click the Next.ⴗⴘⴙ
zCalibration continue....21Basic UsageCalibration (2) Set up the standard time zone date, and time.To set up a password, tap 'Next'otherwise tap 'Skip'.To set up a password set up a password type and password.To set up an e-mail account,tap 'Next' otherwise tap 'Skip'.
zCalibration continue....22Calibration (3) Basic UsageChoose outlook e-mail to set upan e-mail account and then tapthe 'Next'.(POP3/IMAP/Outlook/E-mail)If you choose outlook E-mail orPOP3/IMAP and then tap the'Next', you should set up it stepby step.When all processes are complete,tap the screen to start system.You can see the screen aboveafter the Calibration.
Main Screen zMain screen–Main Screen is set below23Basic UsageStart menuDay/Time infoWireless infoUser infoInfo barMessages infoTask infoToday infoLock infoPocket MSN infoLeft / Right function infoButton functionStart menuInfo barDay/Time infoWireless infoUser infoMessages infoTask infoToday infoLock infoPocket MSN infoSelect the program you want to use.View the power, modem, sound, input mode and connecting view.View the current date and time.View the Wireless power and state.View the personal information.View the Messages received.View the task information.View the Today’s information.View the screen / Lock information.View the Pocket MSN information.Left/Right Function info View the Left / Right information.
zTo use Input- Process this program " Start > Programs > Word Mobile".zTo use the Keyboard Input24Basic UsageTap the arrow next to the keyboard icon and then select the keyboard on the menu screen as a picture above.This is the Keyboard Input Screen.You can input the letter, numberand characters when you clickthe each icon on the keyboardInput screen.Input Screen (1)
zUsage of Block Recognizer input.25Input Screen (2)Basic UsageTap the arrow next to the keyboard icon and then select theBlock Recognizer on the menuscreen as a picture aboveIt is the screen of blockrecognizer input.In this input screen you can inputletters in 'abc' and numbers in '123 ‘each in the input box seen on thescreen.In the input screen of blockrecognizer you can input specialletters and characters by tappingthe input box once.
26zUsage of Letter RecognizerInput Screen (3) Basic UsageSelect the arrow next to the keyboard icon and then Select the'Letter Recognizer' on the menu screen as the picture above.This is the 'Letter Recognizer'screen.In the ‘Letter Recognizer' inputscreen, you can input the capitalletters in 'ABC', the small lettersin 'abc' and numbers in '123' eachin the input box seen on the screen.Please choose ‘Options…’ on the input menu.Select ‘Letter Recognizer’ as input method andthen click ‘Options…’. Here you can configure theinput modes.
27zUsing transcriber input–Transcriber is a writing recognizer program. It provides you various writing input and input menu.Input Screen (4) Basic UsageSelect the arrow next to thekeyboard icon and then select theTranscriber on the menu like thepicture.This is the Transcriber inputscreen.If you input letters, numbers andcharacters on the screen with thestylus pen, it would be writtenautomatically on the place wherethe cursor is blinking. You do nothave to concern about the inputbox when using transcriber.
28zInput by using Keypad–You can input numbers and letters by using Keypad. Input Screen (5)Basic UsageConvert ‘1 ,A, a’ using the input convert buttonon the input screen as the left picture. Then youcan input capital letters, small letters, numbersand characters using keypads.For example, in the case of inputting the M3SKY, Convert to ‘a’ > Keypad 6 > convert to ‘1’>Keypad 3 > Convert to ‘A’ > Keypad 7(4 times)> Keypad 5(twice) > Keypad 9 (3 times)By pressing ‘*’, ‘0’,’#’ while ‘Fn’ button ispressed, you can apply ‘Space’, ‘Enter’ and ‘OK’function respectively.Pressing ‘Fn’ Key will change the function modein following order : ‘Fn’ one time mode -> ‘Fn’hold mode -> ‘Fn’ disable modeAlphanumeric buttonInput Key buttonFunction button
3. ActiveSyncActiveSync IntroductionInstalling ActiveSyncSynchronization of DataActiveSync Troubleshooting
ActiveSync IntroductionzSync is an abbreviation of “Synchronization” and refers to the process of making data in PDA and desktop computer to be same by linking both data.–Sync is an abbreviation of ‘Synchronization” and refers to the process of making data in PDA and desktop computer to be same by linking both data. When either PDA or PC modifies data, it updates others to the most recent data. –Not all the data is synchronized at same time. It follows the option settings of ActiveSync, provided by Microsoft.zBy linking M3 SKY and computer, you can make data in both devices in the same status (synchronization) or install, copy, move, delete programs for business purpose and others. zIt is compulsory to install this program in order to install business programs, synchronize data, back up and synchronize contact numbers in an address book, etc.Do not connect USB of Cradle to desktop PC before installing Active Sync to desktop PC..It may cause a desktop PC cannot recognize PDA since Active Sync contains PDA program driver.30ActiveSync
31zTo install ActiveSync- Select the ActiveSync program in the CD provided, and then install it to the computer.–Once the installation is complete, connecting window will start. Connect the cradle with PC using USB cable, and then dock the device on the cradle.–When the device is recognized on the PC, Connection will be established after assigning the port for it automatically. zThe definition of Partnership–It is the process of paring PC with PDA in order to exchange the data each other. Via this process, the data on the PC and on the PDA can be synchronized.ⲻThe synchronization is available with Outlook 2003 or above version. It is not supported on the outlook express which is provided together with Windows OS. ActiveSyncActiveSync install /connectPlease re-try the synchronization if connection is disturbed by strong noise or static. –To install ActiveSync on the host computer, download version 4.1 or higher from the Microsoft website at http://www.microsoft.com. Refer to the installation included with the ActiveSync software.–Microsoft recommends installing ActiveSync on the host computer before connecting the mobilecomputer.USB connection to PC
32ActiveSynczIf you see the Microsoft ActiveSync window in the desktop PC, you can find an option icon. If you click this option icon, taps such as “Sync Options”, “Sync Mode”, “Rules” will appear. z“Sync Options” is a menu that you can select an item to synchronize.–Contact, Calendar, E-mail, Tasks, Memo, Favorite, Files, Media, etc. z“Sync Mode” enables you to choose synchronization methods. According to the selected synchronization mode, there are 3 following methods: –Continuously while the device is connected: In this mode, if you want to carry out synchronization, connect the device to the desktop computer. ActiveSync will immediately start synchronization and synchronize according to the user’s input of changes ina computer or the device.–Only upon connection: If you want to carry out the synchronization after the first synchronization on a manual basis, click Sync.–Manually: In this mode, ActiveSync will not run automatically. In order to carry out synchronization, click Sync.zSynchronization is the process of updating M3 and desktop PC after comparing their data. Any files including personal organizer management data, etc in M3 can synchronize with those in the desktop PC.Synchronization of DataWhen Troubleshooting the ActiveSync, Check the solutions below.zEnsure the correct USB cable is used in the cradle with USB port of the PC.zEnsure the power input cable of M3 Sky or LCD.zPlease re-try the Synchronization after Soft-reset or Hard-reset. Finish the running programand save the data for sure before resetting.
Via GPRS/EDGEVia Wireless LANBrowsing the Web Site4. How to use Internet
Via GPRS/EDGE (1)How to use InternetzTo connect to the Internet via GPRS/EDGE(1)Tab ‘Start > Settings > Connections’ Select ‘Add a new modem connection’of ‘My ISP’ in the ‘Connections’.Put the name you want into the‘Enter a name for the connection’.Then select the ‘cellular Line(GPRS)’in the ‘Select a modem’.34
zTo connect to the Internet via GPRS/EDGE(2)35Via GPRS/EDGE (2)How to use InternetInput the Access point name suitable to the SIM Card / Operatorcompany of Network then Tab the‘Next’.Tap the ‘Finish’ after input theUser name and passwordaccording to the setting.(In some cases, it is required toset IP address at the advancedmenu.)Select the ‘Manage existing connections’on the Connections. Choose the ISP whichyou want to connect to as picture above.* The saved settings automatically appliedat connecting.You can explore the Internet usingGPRS / EDGE connection.
36Via Wireless LAN (1)How to use InternetzYou can use the Wireless Network Via Wireless LAN. zM3 SKY supports IEEE 802.11b and 802.11g. zTo connect the Wireless LAN (AP must be on and functioning)Wireless LAN is optional. You can only use WLAN, when the WLAN module is built in to the device.On the Today Main screen, you selectWireless state bar or go to ‘Start > Settings > Connections>’ Wireless Manager.Tap the WI-Fi on the ‘WirelessManager' to turn WLAN on.When the dialogue box is appeared, Select the AP you want andthen, you can connect the Network with it.To connect directly on the Main Screen
zTo connect via Wi-Fi menu37Via Wireless LAN (2)How to use InternetOn the settings screen, you select Wi-Fi Icon. You can also tap Start > Settings >Connections>Wi-Fi. Configure the connect type thenclick the 'Next'.Configure the connect type then click the 'Next'.Input the authentification data then clickthe 'Next'.After configure Network authentification,tap the 'Finish'. You can see the wirelessNetworks available.
zContinue from the last page–Configure DHCP / Static IP38How to use InternetVia Wireless LAN (3)Tap an adapter to modify setting on the wireless LAN card and select the 'Edit'.If you configure the IP as DHCP, Click the 'Use Server-assigned IP address.If you configure the IP as Static, Click the 'Use Specific IP address.
39How to use InternetBrowsing the Web Site (1)zMicrosoft Internet Explorer- Via GPRS / EGDE , Wireless LAN and Activesync connection, you can browse the web.- You can download programs and files by accessing the Internet.To use the Internet ExplorerTap 'Start > Internet Explorer This is the Internet Explorerprocessing screen.Address WindowSearchingInput the address you want on the address window in upper of the screen, thenclick the 'search'. It will try to connect to that web address via Wireless networkthat is connected.
zContinue from the last page.40How to use InternetBrowsing the Web Site (2)On the 'Menu > Favorites...' you can see the list of sites that you have saved and browse to it directly. The favorite page is like the picture above.On the Menu > History... You can see the list of sites that you haverecently visited. The history page is like the picture above.See the 'Start > Help' if you want to know more about how to use the Internet Explorer
zTo set up an e-mail account 41How to use InternetBrowsing the Web Site(3)Process the 'Start > Messaging'. Select the'Menu > Tools > New Account...in the outlook E-mail box.Set an E-mail provider for 'other‘then tap 'Next.'Input the E-mail address on theEnter e-mail address , then tap ‘Next '.When the Status is for completed,tap the 'Next'.
zContinue from last page42How to use InternetBrowsing the Web Site (4)Set an E-mail provider for 'other‘then tap 'Next'.Select the Account Type and putthe Name then tap 'Next'.Input the 'Incoming mail, Outgoingmail, Domain' then select 'Finish'.* For detailed setting menu, pleaseclick ‘Options’.After finishing the setting you can send andreceive E-mail using the e-mail account.
zTo send and receive an E-mail43How to use InternetBrowsing the Web Site(5)< To receive an e-mail>Select the 'Message' on the 'Today'Select the 'Send / Receive' in the 'Menu' and check the received mail.<To send an e-mail>After process the 'Message' program , select the 'New' . You can send an e-mail when you select the 'Send' after writing a newe-mail.
445. How to use the PhoneInit ScreenPhone ControlPhone call and receive Phone bookSMS send and receive Phone functionsPhone setting
Init Screen45How to use the PhonezPhone Main ScreenGSM OperatorNetwork TypeGSM / Network StatusVolumeCall StatusInput NumberKey PadContactsPhone MenuGSM Operator It indicates the current Network Provider.Call Status It shows Call Status.Input Number It shows Inputted Numbers.Key Pad It is used to dial the number and can be used as speed-dial.Contact It shows Phone Book Dialog.Network Type It displays the availability of GPRS and EDGE connection.GSM/NetworkStatus It indicates the signal strength.Volume It is Volume on/off and vibratePhone Menu Talk, End, Speed Dial, Call History, etc menu…
zPhone Program On/Off46Phone ControlHow to use the PhoneYou can turn on and off phonein Wireless ManagerzPhone Call Send/EndSEND ENDTap the Phone button on the left bottom of the Today Screen and then you can process thePhone program. Also you can finish the programusing the X button.Select the SEND and END button likethe picture above to start and finishthe Phone program.
zPhone Call47How to use the PhonePhone Call and Receive To make a call:1.Input number via program keypad or device keypad.2.Make a call by pressing the ‘Talk’button on the program, or pressing‘SEND’ button on the device.To hang up:Press the ‘END’ button on the program or on the device.zPhone ReceiveWhen you get the Incoming Call, you can receivethe phone call tapping the Answer button. If youdon’t want to receive it just tap the Ignore button.
PhonebookzTo use Phonebook48How to use the PhoneSearchingA name orNumber.Contacts Menu Contacts OptionSearching Contacts You can search the contacts by writing the name and number or tapping.New Contact Input the new contactNew SIM Contact Input the contact to the SIM Card.Send Contact Transmit the information of Contact by BEAM or SMS.Copy/Delete Copy or delete the ContactOptions Set the Options for Contact.View By See the Contact by Type ( Name , Company, Number … )ContactsMenuFilter Filter the information you want.Call W/H/M Call by the number on the Contact.Send E-mail Send an E-mail by the address on the Contact.Send SMS Send SMS by the number on the Contact.Add to Speed Dial Add the number on the Contact to Speed Dial.Send Contact Send the information of Contact by BEAM or SMS.ContactsOptionCopy/Delete Copy and Delete the Contact.
zHow to send SMS49How to use the PhoneSMS send and receive(1) Select ‘message information’ menuon the main screen to send SMS.You can also send SMS by selecting‘SMS send’ menu on Contacts or anyother applications.Change to the ‘Text Messages’ onthe Message Program like thepicture above and tap the ‘New’ onthe bottom.Input the phone number andmessage. Tap the send to sendSMS.You can see the pop-up screenwhen SMS is sent successfully.
zHow to receive SMS50How to use the PhoneSMS sent and receive (2)When connected to the GSM network, new message arrival will be alerted apicture above.By tapping one of the received messages, thecontent will be displayed on the separatewindow as picture above.Controlling received SMS can be done by usingthe menu on the ‘New Text Message' alertwindow or on the Text Messages program.
Controls while on the phoneFunctions while on the phone51How to use the PhoneYou can use various functionswhen you select the button onthe bottom while talking on thephone.You can see the list of recentcalls by selecting ‘Call History’.You can take a memo While talkingon the phone by selecting the Note.KeypadChange to Mode available toinput the Number on thescreen.MuteSetting for receiver not to hear my voice while on thephone.Hold Hold for a moment while onthe phoneContact Move to ContactEnd End phone callFeatured functions while on the phone
Phone settingPhone setting52How to use the PhoneTap the ‘Start > Settings > Personaltap > Phone’ and in that menu you can set the Security and Sounds.Check the ‘Require PIN when phone is used’ check box when PIN lock isrequired.Tap the ‘Start > Personal Tab > Phone > Network’ to set an information related to the Network.( Change the Network ..)Tap the ‘Start > Personal Tab >Phone > Services Tab ‘ to set aninformation related to the Service.( In the Network or SIM )Call Barring Block the calling to the specific number.Caller IDTurn on or off the Caller ID function. If it is enabled, your number will be shown to the receiver. Call Forwarding You can forward the incoming call to the other number.Call WaitingYou can receive another call while you are talking on the phone.Voice Mail Text MessagesSet the SMS Service Center number and Voice Mail number.Fixed Dialing Limit the available phone functions using PIN2.Description of Service Menus
6. Usage of DeviceCameraBluetoothIrDAGPSScanner
To use the Camera (1)zNotice before taking pictures- The camera equipped with the M3 Sky is supported 2 mega pixels.Usage of DeviceFunction Still Video CommentMode Normal, Burst, Timer N/A Setting for taking photoBrightness -3, -2, -1, 0, +1, +2, +3 Setting for BrightnessResolution QCIF, QVGA, CIF, VGA ,SVGA, SXGA, UXGA QCIF, QVGA Setting for sizeWhite Balance Automatic, Sunny, Cloudy, Fluorescent, Incandescent Setting for White balanceFlash Flash ON, Flash OFF Setting for Flash ON/OFFAF Trig AF Setting for Auto FocusCamera Program Processing ScreenCamera is optional. On the device with no built-in camera, Camera function can not be used.QCIF(176x144), QVGA(320x240), CIF(352x288), VGA(640x480), SVGA(800x600)SXGA(1280x960), UXGA(1600x1200)54
zTo process the camera program- You can process the camera program when you tap the camera button or tap the camera icon on the'picture or video'.To use the camera (2)Usage of DeviceSelect the 'Start > Programs > Pictures & Video. You can process the camera program when you select the cameraicon on the Picture & Video or select the camera icon in the menu.55Tap the ‘Menu > Options … > Camera Tab’ and then you can set the route of the storage memory , name and quality. You can set the Video on the Video Tab.
zTaking a Still photoUsage of Device56Execute the camera program first. Move around to focus the desireditem. Finally press the camera button to take a picture.After executing the camera program , Preview mode will be changed to standby mode after certain amount of time. In order to start Preview Mode again, just tap the screen or press thecamera button.After taking a picture, the captured image will be displayed on the screen.If you want to execute the camera program, tap the camera button at thebottom or click the camera icon on the left of window.You can see the list of pictures taken previously by tapping ‘Thumbnails’ inthe Camera shooting mode.To use the camera (3)
zTaking videos57Usage of DeviceIf you want to take a video, select ‘Menu > Videos' after executing the camera program.While taking a video, you caneither stop (by tapping stopbutton) or pause. (by tappingpause button)If you want to watch the video taken, Select the 'Thumbnails' firstto see the list of video files available.When you select the video you want, you can play the videorecorded.To use the camera (4)
zBluetooth On / Off58Bluetooth Communication(1)Usage of DeviceOn the 'Today Main Screen' , select the Wireless State bar or Tap 'Start > Settings > Connections and select ‘Wireless Manager’.Bluetooth is optional. Device without built-in Bluetooth can not use Bluetooth service.Bluetooth support the transmission and reception of files between the serial connecting service and Windows Mobile device.To turn on/off Bluetooth, tap the Bluetooth on the Wireless ManageThe status of Bluetooth can be seenon the wireless status bar on themain screen.
59zSetting the Bluetooth-On the Bluetooth setting screen, you can set the Mode, connecting to BT device and COM settingsviceUsage of DeYou can set the Bluetooth modeand establish connection whenyou tap the 'Bluetooth' icon onthe Start > Settings > Connections.In the Mode tab, you can turnon/off Bluetooth and make visibleor invisible the device from outside.In the device tab, you can searchand connect to other Bluetoothdevices.In the COM Ports tab, you canset incoming Port and outgoingPort.Bluetooth Communication(2)
zTo connect the Bluetooth- you can establish the connection by searching, matching pin code and selecting the service.60Usage of DeviceYou can search the Bluetooth deviceavailable when you select the 'Addnew device...' on the Device Tab.Select a device to connect with andtap 'Next' . Also you can selectthe 'Refresh' button if there is nodevice available.Enter a Passcode to establish asecure connection.The passcode can be fixed oneor the one which is negotiatedbetween two parties in beforehand.It shows the service availableon the Bluetooth device.It shows the registered devices.To add more device, please tab‘Add new device’.Bluetooth Communication(3)
zHow to make the serial connection via Bluetooth–It is possible to assign the registered device to the COM port.61Usage of DeviceOnce the device is registered,please tap ‘COM Ports’ tab andthen select ‘New Outgoing Port’.Select the device you wand to addand tap 'Next'.Select the port which is available,and then tab ‘Finish’.Once the connection is made, youcan use the available service.Bluetooth Communication(4)
zTransferring files via Bluetooth connection.- It is possible to transfer files between Windows Mobile devices via Bluetooth.62Usage of DeviceIn order to transfer files via Bluetoothconnection, please go to 'Start > Settings >Connections > Beam‘ and then Checkthe 'Receive all incoming Beams ‘.Select the file you want to transfer in the File Explorer. Press the filename long and tab ‘Beam File’.By tapping ‘Beam File’, the list of available Bluetooth devicesshown. Please choose the device to transfer the file to.Bluetooth Communication(5)
zTo connect via IrDAM3 Sky can communicate with desktop, notebook, pocket PC as well as other PDA that has OBEX protocol for the IrDAcommunication.To use infrared communicationLocate Infrared communication port to be in series with an infrared (IrDA) port with other device.Press a quick link icon > Infrared communication menu.Infrared communication program is started and you can exchange data.If you want to have a serial communication with the device likeprinter, it is possible by connecting the COM Port.ⲻIt is advised to communicate within the shortest distance.Shorter distance makes data transmission faster. 63Usage of DeviceIrDA CommunicationIrDA Communication PortConnecting to IrDA PrinterFile transmission between PDAIrDA port is optional. Device without IrDA port can not use this feature.
zTo set the GPS–Tap the ‘Start > Settings > System Tab > GPS’ and then you can set the information related to the GPS.–You don’t have to set additional information when there is a single program which uses GPS data. Whenthere are more than one program which use GPS data, you need to set the program port and hardwareport required for each program.64Usage of DeviceTo use the GPS(1)Select the GPS on the System Tab. Set the GPS Program Port which is not yet used.Set the Hardware port of the device.GPS hardware port for M3 sky isCOM2 and with baud rate of 9600.GPS is optional. GPS feature is not available on the unit with no GPS module integrated.
zTo Connect the GPS- When there is a single GPS program, please use the GPS hardware port (COM2). When there are morethan one GPS program, please use the pre-defined GPS program port.65Usage of DeviceTo use the GPS(2)Execute the GPS program you want. Set the COM Port and Baud Rate. It is available to use variousapplication using GPS like searchingthe current location.Sample GPS map is not provided by MobileCompia
66Usage of DevicezHow to use scanner–Usage of 1D Scanner–Usage of 2D ScannerTo use the scannerCorrect way Incorrect wayScanner is optional. You can not use scan feature with no scanner enabled device.2D Barcode Scanner is optional. Only with 2D Barcode scanner enabled device, you can do 2D barcode scan.Correct way Incorrect way
CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment WAR NING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. INFORMATION TO USER: This equipment has been tested and found to comply with the limit of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation; if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient / Relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help
10For Your SafetyFCC RF Exposure InformationWARNING! Read this information before operating the phone.In August 1996, the Federal Communications (FCC) of he UnitedStates, with its action in Report and Order FCC 96-326, adoptedan updated safety standard for human exposure to radiofrequency (RF) electromagnetic energy emitted by FCCregulated transmitters. Those guidelines are consistent withthe safety standard previously set by both U.S. andinternational standards bodies.The design of this phone complies with the FCC guidelines andthese international standards.CAUTIONUse only the supplied and approved antenna. Use ofunauthorized antennas or modifications could impair callquality, damage the phone, void your warranty and/or result inviolation of FCC regulations. Do not use the phone with adamaged antenna. If a damaged antenna comes into contactwith skin, a minor burn may result. Contact your local dealerfor a replacement antenna.Body-worn OperationThis device was tested for typical body-worn operations withthe back of the phone kept 0.59 inches (1.5cm) between theuser’s body and the back of the phone. To comply with FCC RFexposure requirements, a minimum separation distance of 0.59inches(1.5cm) must be maintained between the user's bodyand the back of the phone. Third-party belt-clips, holsters, andsimilar accessories containing metallic components should notbe used. Body-worn accessories that cannot maintain 0.59inches(1.5cm) separation distance between the user's bodyand the back of the phone, and have not been tested for typicalbody-worn operations may not comply with FCC RF exposurelimits and should be avoided.

Navigation menu