Lutron Electronics 0021 HRT-10KP User Manual RF TT KP Instr

Lutron Electronics Company Inc HRT-10KP RF TT KP Instr

USERS MANUAL FOR HRT KEYPAD

1Please Read Before InstallingInstallation InstructionsDescriptionThe RF Tabletop Keypads are for use with HomeWorksInteractive systems. The keypad buttons are pro-grammed with a personal computer using theHomeWorks Interactive Programming Utility. Up to 32 keypads, each with a unique address, can beassigned to each HomeWorks Interactive RF Processor. HRT-5KPImportant NotesBattery Models (-C only):Use only high quality alkaline batteries, two (2) size AAA,1.5V. Caution - Do not use rechargeable batteries.Using improperly rated batteries could damagethe RF Tabletop Keypad.All Models (-A and -C): 1. Use only the DC adapter provided by Lutron withyour Tabletop RF Keypad. Caution - Using a DC adapter not rated for thefollowing specifications could damage the con-trol and possibly overheat the DC adapter.• Input: AC 120/127V, 50/60Hz• Output: DC 9V/300mA Class 22. Clean control with a soft damp cloth only. Do notuse any chemical or abrasive cleaners.3. Operate in ambient temperatures between 0°C (32°F)and 40°C (104°F).4. Do not paint controls.5. RF Keypads must be located within 30 feet (9m) ofan RF Signal Repeater or an RF Processor. Multiplerepeaters may be necessary to provide adequatecoverage.6. RF Keypads do not function until they are addressedand programmed. See the HomeWorks InteractiveProgramming Utility online help.HRT-5RLHRT-10KP HRT-10RLHRT-15KP HRT-15RLHRT-6LKP HRT-6LRLTabletop KeypadsHRT- 5KP-A, -C 10KP-A, -C 15KP-A, -C 6LKP-A, -C5RL-A, -C 10RL-A, -C 15RL-A, -C 6LRL-A, -C
2Battery Installation (-C Models)1. Remove battery cover.2. Install batteries as shown. Use two, 1.5V AAAAlkaline batteries only.3. Replace battery cover.DC Adapter Installation (All Models)1. Find a suitable location for the RF TabletopKeypad. Place the Keypad in a convenient andaccessible location. Note: RF Keypads should belocated within 30 feet of an RF Signal Repeater oran RF Processor.2. Apply power to the RF Tabletop Keypad.If the LEDs do not flash when powered,ensure that the DC adapter is installedproperly and that there is power at thereceptacle. If problem persists, call theLutron Technical Support Center at (800)523-9466.?Optional Wall MountingRF Tabletop Keypads may be wall mounted using thesupplied wall bracket.Verify LEDsflash when pow-eredPlug in powercord and DCadapterAttach wall bracket to wall using thesupplied screws and wall anchors.Wrap excess DC Adapter cord (ifusing) around the cord holder.Align Keypad and snap ontowall bracket.Note: (Battery-operated modelsonly)• The RF Tabletop Keypad goes to “sleep”after a short period of inactivity.• Press any button to “wake up” theKeypad.
3Symptom Cause and Action• Keypad is not programmed into the system. See the RFProcessor Instructions for setup details.• Keypad is out of system communications range. Move thekeypad to within 30 feet of an RF Repeater or RFProcessor.• Button being pressed has not been programmed. See theProgramming Utility online help for programming details.• Dead, low, or no batteries in keypad. Replace the batter-ies.• Batteries are incorrectly installed. Install batteries as indi-cated inside the keypad.• Batteries are not making contact with the battery termi-nals. Adjust the batteries so they make contact with theterminals.• Batteries are low. Replace the batteries.• No power available to keypad. Plug in power supply.• Faulty power supply. Replace power supply.• Keypad is not programmed. See the RF ProcessorInstructions for setup details.After a Tabletop RF Keypad “wakes up”, additional buttonpresses cause the control to flash all its LEDs simultane-ously.A Tabletop RF Keypad’s LEDs cycle up and down during“wake up”, but the system lights do not respond to buttonpresses.A battery-operated Tabletop RF Keypad will not “wake up”when a button is pressed.A battery-operated Tabletop RF Keypad “wakes up” butgoes to “sleep” quickly after a button press.Nothing happens when a Tabletop RF Keypad’s buttonsare pressed.HomeWorks InteractiveTM Keypad TroubleshootingKeypad is working properly when LEDs light up and loads respond as buttons are pressed.RF Keypads do not function until they are addressed and programmed. See the HomeWorks Interactive ProgrammingUtility online help.
LIMITED WARRANTYLutron will, at its option, repair or replace any unit that is defective in materials or manufac-ture within two years after purchase. After the two year period, a pro-rated warranty appliesto this product until eight years after the purchase. For warranty service, return unit to placeof purchase or mail to Lutron at 7200 Suter Rd., Coopersburg, PA 18036-1299, postage pre-paid. Telephone the Lutron Technical Support Center toll free at 800-523-9466. For moreinformation regarding this warranty contact your Lutron representative.THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES, AND THEIMPLIED WARRANTY OF MERCHANTABILITY IS LIMITED TO TWO YEARS FROM PUR-CHASE. THIS WARRANTY DOES NOT COVER THE COST OF INSTALLATION,REMOVAL OR REINSTALLATION, OR DAMAGE RESULTING FROM MISUSE, ABUSE,OR IMPROPER OR INCORRECT REPAIR, OR DAMAGE FROM IMPROPER WIRING ORINSTALLATION. THIS WARRANTY DOES NOT COVER INCIDENTAL OR CONSEQUEN-TIAL DAMAGES. LUTRON’S LIABILITY ON ANY CLAIM FOR DAMAGES ARISING OUTOF OR IN CONNECTION WITH THE MANUFACTURE, SALE, INSTALLATION, DELIVERY,OR USE OF THE UNIT SHALL NEVER EXCEED THE PURCHASE PRICE OF THE UNIT.This warranty gives you specific legal rights, and you may also have other rights which varyfrom state to state. Some states do not allow limitations on how long an implied warranty lasts,so the above limitation may not apply to you. Some states do not allow the exclusion or limi-tation of incidental or consequential damages, so the above limitation or exclusion may notapply to you.This product may be covered by one or more of the following U.S. patents:5,248,919; 5,736,965; 5,838,226; 5,905,442; D389,461; D395,037; D422,969; D428,855;D436,579 and corresponding foreign patents. U.S. and foreign patents pending. Lutron andHomeWorks are registered trademarks and HomeWorks Interactive is a trademark of LutronElectronics Co., Inc.© 2002 Lutron Electronics Co., Inc.Technical and Sales AssistanceIf you need assistance, call the toll-free LutronTechnical Support Center. Please provide exactmodel number when calling.(800) 523-9466 (U.S.A., Canada and the Caribbean)Other countries call:Tel: (610) 282-3800Fax: (610) 282-3090Visit our Web site at www.lutron.comLutron Electronics Co., Inc. 7200 Suter RoadCoopersburg, PA 18036-1299Made and printed in the U.S.A. 11/02 P/N 043-112 Rev. AFCC InformationNote: This equipment has been tested and found to comply with the limits for a Class B digi-tal device, pursuant to Part 15 of the FCC rules. These limits are designed to provide rea-sonable protection against harmful interference in a residential installation. This equipmentgenerates, uses and can radiate radio frequency energy and, if not installed in accordancewith the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equip-ment does cause harmful interference to radio or television reception, which can be deter-mined by turning the equipment off and on, the user is encouraged to try to correct the inter-ference by one or more of the following measures: • Reorient or relocate the receiving antenna.• Increase the seperation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Caution: Changes or modifications not expressly approved by Lutron Electronics Co. couldvoid the user’s authority to operate this equipment.Industry Canada InformationThe term “IC:” before the radio certification number only signifies that Industry Canada tech-nical specifications were met.

Navigation menu