Lumisource BMSVC Boomchair Wireless Transmitter User Manual Manual

Lumisource, Inc. Boomchair Wireless Transmitter Manual

Contents

Manual

1OWNER’S MANUAL
2Congratulations!You are now the proud owner of a Wireless BOOMCHAIR™. Prepare to experience your entertainment on a whole new level. BOOMCHAIR™ allows you to HEAR the sound and FEEL the excitement. You’ll experience every crash, bang, and boom while enjoying your favorite game, music, or movie. BOOMCHAIR™ is also a great game seat built to endure the rigors of today’s gaming environment. Take a moment to review your owner’s manual before connecting your BOOMCHAIR™. Assembly and operation of the BOOMCHAIR™ is simple.If you need further assistance visit us at www.BoomChair.com or www.LumiSource.comBOOMCHAIR™, a LumiSource® product.LumiSource, Inc.2950 Old Higgins Road, Elk Grove Village, IL 60007PATENTS PENDING READ BEFORE USE• DO NOT wash or soak with water. If BOOMCHAIR™ gets wet, disconnect power immediately and do not use until completely dry.• Turn power off and unplug BOOMCHAIR™ when not in use.• Children under 5 years old should not use this product without parental supervision.• For INDOOR use only/ DO NOT expose to direct sunlight, moisture, or extreme temperatures.• DO NOT use on slippery or uneven ooring.• Excessive exposure to audio equipment at high volume may lead to hearing loss.• DO NOT OPENCaution: To reduce the risk of electric shock and re, do not open the BOOMCHAIR™. There are no user serviceable parts inside. Refer to your warranty for service information.FCC part 15.21:Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.FCC part 15.105:NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio TV technician for help.#!54)/.FCC WARNING This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.FCC ID: U7YBMSVCExposure to radio frequency energy:This device and its antenna must not be co-located or operated in conjunction with any other antenna or transmitter. To comply with FCC RF exposure requirements, only use supplied antenna.
3 SET-UP GUIDEThe BOOMCHAIR™ comes with the following: PARTS LIST:1) BOOMCHAIR™ 2) AC/DC POWER SUPPLY (UL Listed)3a) RCA TO MINI AUDIO CORD (headphone jack to audio left & right channel connectors)3b) RCA CORD (audio left & right channel connectors)3c) RCA AUDIO COUPLER4) RECEPTACLE5) HOOK & LOOP FASTENER6) ADJUSTABLE RECLINE STOPPERS7) ADJUSTABLE HEADREST8) WIRELESS TRANSMITTER(requires 4 AA batteries, not included)9) WIRELESS AUDIO CORD (headphone jack to3b3a2563c1748 DASHBOARD CONTROL PANELPOWERINPUT OUTPUTRRLL0 3 2 1BASS/TREBLE+VOLUME+(A) BASS/TREBLE CONTROL(B) POWER SWITCH / VOLUME CONTROL(C) LED POWER INDICATOR(D) WIRELESS ON/OFF & CHANNEL SWITCH(E) HEADPHONE JACK (F) RCA AUDIO OUTPUTS(G) RCA AUDIO INPUTS9Power rating: 12 V AC @ 1830/mADimensions: 27 in. L x 18 in. W x 36 in. H Weight: 33 lbs. 3 in.(7.6 cm) coaxial mid-high speakers @ 3W 4 Ohms SYSTEM SPECS:headphone jack cord )68.5 cm. L x 46 cm. W x 91 cm. H
4 POWERINPUT OUTPUTRRLL0 3 2 1BASS/TREBLE+VOLUME+ CONNECTING TO GAME CONSOLESStep 1: Plug yellow composite video cable from game console into video input of TV. (Fig. 1)Step 2: Plug Red/White RCA cord from game console into RCA INPUT (G) of BoomChair™. (Fig. 2)Step 1: Connect Audio Coupler (3c) to Red/White RCA cord from game console.Step 2: Connect one end of RCA cord (3b) into other end of Audio Coupler (3c).Step 3: Connect other end of RCA cord (3b) into RCA INPUT (G) of BoomChair™.INNote: Most game consoles are supplied with a custom connector with yellow video out and RCA red/white audio out.3c 3bGAME CONSOLE TV BOOMCHAIR™ Fig. 1 Fig. 2Cable supplied with game consoleFig. 3Note: It may be necessary to extend your BoomChair™ further away from your TV or console. Here’s how. (Fig.3)AUDIO COUPLER (3c) ASSEMBLY INSTRUCTIONS3c 3aStep 1: Connect Audio Coupler (3c) to Red/White RCA cord from game console.Step 2: Connect red/white end of RCA cord (3a) into other end of Audio Coupler (3c). (Fig. 4)Step 3: Connect mini audio end of RCA cord (3a) into Wireless Transmitter (8). (Fig. 5)Step 3: Set transmitter and channel switch (D) to matching frequency.DIRECT CONNECTIONWIRELESS CONNECTIONFig. 4Fig. 58Step 1: Lift seatback to the upright position.Step 2: Secure the seat back using attached hook & loop fasteners.Step 3: Insert receptacle (4) into adapter cord (2).Step 4: Plug adapter (2) into outlet.Step 5: Turn Boomchair™ on by turning Power knob (B) clockwise.Step 6: Insert 4 AA batteries (not included) into wireless transmitter. Turn power switch on.4STEP 1STEP 32Step 1: Unscrew the lid of the battery housing located at the under side of the Boomchair™ .Step 2: Insert 8 “D” cell batteries (not included).Step 3: Securely screw down the lid of the battery housing.Step 4: Turn Boomchair™ on by turning Power knob (B) clockwise.BATTERY POWER SUPPLY
5Step 1: Connect the Red/White ends of RCA cord (3a) into RCA INPUT (G) of BoomChair™. Step 2: Plug the single end of the RCA cord (3a)into the headphone jack of your device.Step 3: Turn Boomchair™ on by turning Power knob (B) clockwise.Step 4: Turn portable device on.POWERINPUT OUTPUTRRLL0 3 2 1BASS/TREBLE+VOLUME+iPodMP3 PlayerPortable Audio DevicePSPNintendo DSPortable Game3a CONNECTING TO PORTABLE AUDIO / VIDEO DEVICES9TVVCRDVDStereoSatellite ReceiverOther Devices3aAUDIOOUTiPodMP3 PlayerPortable Audio DevicePSPNintendo DSPortable Game CONNECTING TO AUDIO / VIDEO DEVICESStep 1: Insert 4 AA batteries (not included) into wireless transmitter. Turn power switch on.Step 2: Connect one end of the wireless audio cord (9) into the wireless transmitter. Step 3: Connect the other end of the wireless audio cord (9) into the headphone jack of your device.Step 4: Turn Boomchair™ on by turning Power knob (B) clockwise.Step 5: Set transmitter and Boomchair™ channel switch (D) to matching frequency.Step 1: Connect the Red/White ends of RCA cord (3b) into RCA INPUT (G) of BoomChair™. Step 2: Connect the other ends of RCA cord (3b) into AUDIO OUTPUT of Audio/Video device.Step 3: Turn Boomchair™ on by turning Power knob (B) clockwise.Step 4: Turn Audio/Video device on.POWERINPUT OUTPUTRRLL0 3 2 1BASS/TREBLE+VOLUME+3bTVVCRDVDStereoSatellite ReceiverOther DevicesAUDIOOUTStep 1: Insert 4 AA batteries (not included) into wireless transmitter. Turn power switch on. Step 2: Connect single end of RCA cord (3a) into the wireless transmitter. Step 3: Connect other end of RCA cord (3a) into AUDIO OUTPUT of Audio/Video device.Step 4: Turn Boomchair™ on by turning Power knob (B) clockwise.Step 5: Set transmitter and Boomchair™ channel switch (D) to matching frequency.DIRECT CONNECTION - BE SURE THE WIRELESS CHANNEL SELECTOR IS SWITCHED TO "0"WIRELESS CONNECTION - BE SURE THE WIRELESS CHANNEL SELECTOR NUMBER ON THE CHAIR MATCHES THE TRANSMITTER WITH CORRESPONDING NUMBER OF DOTS.DIRECT CONNECTION - BE SURE THE WIRELESS CHANNEL SELECTOR IS SWITCHED TO "0""0"WIRELESS CONNECTION - BE SURE THE WIRELESS CHANNEL SELECTOR NUMBER ON THE CHAIR MATCHES THE TRANSMITTER WITH CORRESPONDING NUMBER OF DOTS.
6SECOND CHAIR DAISY CHAINING CHAIRS TOGETHER POWERINPUT OUTPUTRRLL0 3 2 1BASS/TREBLE+VOLUME+POWERINPUT OUTPUTRRLL0 3 2 1BASS/TREBLE+VOLUME+Step 1: Connect BoomChair™to any media device as described on pages 4 or 5. This is the rst chair.Step 2: Connect one end of RCA cord (3b) into RCA OUTPUT (F) of rst BoomChair.™Step 3: Connect other end of RCA cord (3b) into RCA INPUT (G) of second BoomChair.™Step 4: Turn all Boomchairs™ on by turning Power knob (B) clockwise.Repeat steps 2 and 3 from second chair to connect more BoomChairs.™3bFIRST CHAIR: Connected to deviceMedia DeviceUp to 8 chairs can be connected using the wireless method. This requires only one transmitter and all chairs switched to wireless mode.Step 1: Connect Boomchair to any device using the wireless methods described on pages 4 or 5.Step 2: Set transmitter and all Boomchair™ channel switches (D) to matching frequency.Step 3: Turn all Boomchairs™ on by turning Power knob (B) clockwise.Up to 4 chairs can be connected when not using the wireless feature.DIRECT CONNECTIONWIRELESS CONNECTIONShould interference occur, switch the channel on the wireless transmitter using the top slider bar (Fig. 1).Switch the channel selector on the Boomchair™ (Fig. 2) to the Make sure all cables are securely connected.Make sure batteries are correctly installed in the transmitter, and that the power is on, as indicated by the red LED (Fig. 3).POWERINPUT OUTPUTRRLL0 3 2 1BASS/TREBLE+VOLUME+ WIRELESS CONNECTION TIPS Fig. 2Fig. 1Fig. 3Power Switchsame channel as the transmitter.The number correspondsto the number of dots on the transmitter. Select for "0"non-wireless connections.
7 CLEANING/CARE INSTRUCTIONSFabric: Use a clean cloth to dab lightly with soap and water. DO NOT rub.DO NOT immerse in water. DO NOT use detergent.If a problem occurs while using this product, please contact us. DO NOT open unit or attempt to repair on your own. It may result in serious injury from electric shock and void your product warranty. MAINTENANCE AND REPAIRQ: Why isn’t there sound coming from any of my speakers?A: Ensure your BoomChair™ is connected as described in the Setup Guide. Check that the power to the unit is on and the volume is turned up. Also, make sure your audio device is not set to “MUTE” and volume is turned up. If using wireless connection, make sure the transmitter and BoomChair™ are set to the same frequency. Make sure wireless transmitter has fresh batteries and is turned on.Q: Why isn’t there sound coming from one of my speakers?A: Ensure the audio cord to the BoomChair™ is securely connected as described in the Setup Guide. Make sure that both the left and right channel audio inputs and outputs are securely connected to the BoomChair™ and audio device.Q: Where can I get more information?A: Visit us at www.BoomChair.com or www.LumiSource.comContact information: LumiSource, Inc. 2950 Old Higgins Road, Elk Grove Village, IL 60007E-mail: customerservice@lumisource.comNOTE: PLEASE DO NOT USE ON HARDWOOD FLOORS, IT MAY CAUSE SCRATCHING. TROUBLESHOOTING BOOMCHAIR™ Q: Why don’t the LED lights respond when using battery power?A: When using D cell batteries to power your BoomChair™, the LED lights will not be as responsive as when using AC power. This is to conserve the life of your batteries. The LED lights will respond better if the volume of the input device (MP3 player, video game, etc.) is set to maximum volume.
8LIMITED WARRANTY: LumiSource, Inc. (“LumiSource”) warrants this product against defects in materials and workmanship for a period of ninety (90) days from the date of original consumer purchase. If a covered warranty claim is timely made, LumiSource® will, at its sole discretion: (a) repair the product, using new and/or refurbished replacement parts or (b) replace the product with an identical (or comparable) product, without charge to you other than the initial shipping cost to return the product. LumiSource® will only pay return shipping charges for destinations within the 48 continguous U.S.A., if the returned product is covered by the limited warranty.WHAT THIS WARRANTY DOES NOT COVER: This warranty does not cover defects resulting from accidents, alterations, unauthorized repair, failure to follow instructions, misuse, commercial use, re, ood, or acts of God. WHAT WE ASK YOU TO DO: If there is a covered defect, please write or email us within 90 days of the date of purchase at the address noted on page 8 to obtain instructions and authorization to return the product to LumiSource®. You will need to pack the product securely in packaging providing at least the degree of protection of the original carton and packing materials and ship it to us at your expense. You will also need to include with the product (a) a copy of your original proof of purchase (retail receipt) showing the date of purchase and (b) a detailed explanation of the problem(s) requiring service. TO THE EXTENT PERMITTED BY LAW, THIS LIMITED WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, ORAL OR WRITTEN, EXPRESS OR IMPLIED. TO THE EXTENT PERMITTED BY LAW, LUMISOURCE® HEREBY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT APPLICABLE STATE LAW EXCLUDES SUCH DISCLAIMERS, THEN TO THE EXTENT ALLOWED BY LAW, THE TIME FOR ANY CLAIMS FOR SUCH IMPLIED WARRANTIES SHALL EXPIRE 90 DAYS FROM THE DATE OF ORIGINAL CONSUMER PURCHASE. TO THE EXTENT PERMITTED BY LAW, LUMISOURCE® IS NOT RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF TIME, INCONVENIENCE, LOSS OF USE OF YOUR PRODUCT, OR PERSONAL INJURY OR PROPERTY DAMAGE, CAUSED BY YOUR PRODUCT OR ITS FAILURE TO WORK. This limited warranty gives you specic legal rights. Some states do not allow the exclusion or limitation of incidental or consequential damages, and applicable law may not permit the exclusion of certain implied warranties. You may also have their rights, which vary, from state to state. LUMISOURCE, INC. LIMITED WARRANTY Check out our other BOOM afliated products:06222007BOOMCHAIR™ P32BOOMCHAIR™ P42 BOOMCHAIR™ MIGBOOMCHAIR™ AMPLIMITED WARRANTY: LumiSource, Inc. (“LumiSource”) warrants this product against defects in materials and workmanship for a period of ninety (90) days from the date of original consumer purchase. If a covered warranty claim is timely made, LumiSource® will, at its sole discretion: (a) repair the product, using new and/or refurbished replacement parts or (b) replace the product with an identical (or comparable) product, without charge to you other than the initial shipping cost to return the product. LumiSource® will only pay return shipping charges for destinations within the 48 continguous U.S.A., if the returned product is covered by the limited warranty.WHAT THIS WARRANTY DOES NOT COVER: This warranty does not cover defects resulting from accidents, alterations, unauthorized repair, failure to follow instructions, misuse, commercial use, re, ood, or acts of God. WHAT WE ASK YOU TO DO: If there is a covered defect, please write or email us within 90 days of the date of purchase at the address noted on page 8 to obtain instructions and authorization to return the product to LumiSource®. You will need to pack the product securely in packaging providing at least the degree of protection of the original carton and packing materials and ship it to us at your expense. You will also need to include with the product (a) a copy of your original proof of purchase (retail receipt) showing the date of purchase and (b) a detailed explanation of the problem(s) requiring service. TO THE EXTENT PERMITTED BY LAW, THIS LIMITED WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, ORAL OR WRITTEN, EXPRESS OR IMPLIED. TO THE EXTENT PERMITTED BY LAW, LUMISOURCE® HEREBY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT APPLICABLE STATE LAW EXCLUDES SUCH DISCLAIMERS, THEN TO THE EXTENT ALLOWED BY LAW, THE TIME FOR ANY CLAIMS FOR SUCH IMPLIED WARRANTIES SHALL EXPIRE 90 DAYS FROM THE DATE OF ORIGINAL CONSUMER PURCHASE. TO THE EXTENT PERMITTED BY LAW, LUMISOURCE® IS NOT RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF TIME, INCONVENIENCE, LOSS OF USE OF YOUR PRODUCT, OR PERSONAL INJURY OR PROPERTY DAMAGE, CAUSED BY YOUR PRODUCT OR ITS FAILURE TO WORK. This limited warranty gives you specic legal rights. Some states do not allow the exclusion or limitation of incidental or consequential damages, and applicable law may not permit the exclusion of certain implied warranties. You may also have their rights, which vary, from state to state. 2950 Old Higgins Road, Elk Grove Village, IL 60007E-mail: customerservice@lumisource.comwww.BoomChair.com • www.LumiSource.com© 2007 LumiSource, Inc. All rights reserved. BoomChair™ WI-FX, the BoomChair™ WI-FX logo, and the Boom logo are trademarks of LumiSource Inc. Other trademarks are properties of their respective owners.The design of this product is a tradedress of LumiSource, Inc. Patents pending. Actual contents may differ slightly from those pictured. Made in China.Distributed by LumiSource Inc., 2950 Old Higgins Road, Elk Grove Village, IL 60007. www.lumisource.com.This product is not manufactured or distributed by Microsoft® the owner of the trademark Xbox™, This product is not manufactured or distributed by Nintendo® the owner of the trademark GameCube™ and DS™.This product is not manufactured or distributed by Sony® the owner of the trademark Playstation™ PS3™, PS2™, and PSP™. iPod™ is a registered trademark of Apple Computer, Inc. All Rights Reserved.Phone: 1-888-461-5864

Navigation menu