Logitech F0361A F-0361A User Manual BT HEAD UG final draft 10 22 04

Logitech Inc F-0361A BT HEAD UG final draft 10 22 04

Users Manual

User’s GuideHP iPAQ Bluetooth Stereo HeadphonesDocument Part Number: 378962-001November 2004
© 2004 Hewlett-Packard Development Company, L.P.Microsoft and Windows are trademarks of Microsoft Corporation in the U.S. and/or other countries. Intel is a trademark of Intel Corporation in the U.S. and/or other countries.The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.User’s GuideHP iPAQ Bluetooth Stereo HeadphonesFirst Edition (November 2004)Document Part Number: 378962-001
HP iPAQ Bluetooth Stereo Headphones User’s Guide 3CAUTION: Do not wear HP iPAQ Bluetooth Stereo Headphones while operating a motor vehicle or in an area in which it is dangerous for your hearing to be impaired.Getting to Know Your HP iPAQ Bluetooth Stereo HeadphonesButton FunctionForward Tap to track forward to the next media file in the playlist.Back Tap to track backward to the previous file in the playlist.Volume Up Press to increase the volume in the headphones.Volume down Press to decrease the volume in the headphones.Multi Function • Press and hold for fifteen seconds to put headphones in pairing mode.• Press and hold for three seconds to turn headphones on or off.• Press to pause/unpause audio.• After initial Bluetooth pairing, press to reestablish connection.
HP iPAQ Bluetooth Stereo Headphones User’s Guide 4Installing the Headphones Driver1. Perform a soft reset on your HP iPAQ Pocket PC by pressing the Reset button on the back or bottom of the device. For more information on performing a soft reset, refer to the User’s Guide that came with your HP iPAQ Pocket PC.2. Backup your iPAQ Pocket PC using ActiveSync before installing the Headphones driver.3. If the Bluetooth Radio on your Pocket PC is on, turn it off.4. Establish a connection from your iPAQ Pocket PC to your desktop computer via ActiveSync. Refer to the User’s Guide that came with your iPAQ Pocket PC for instructions.5. Place the CD that came with your HP iPAQ Bluetooth Stereo Headphones into an optical drive on your computer.6. Click the button that reads “Click Here to Install Software” and follow the instructions on your screen. If asked to reset your Pocket PC, tap Reset Now.7. Once the unit is reset, the driver is installed.Pairing the Headphones with a Pocket PCBefore you can use the HP iPAQ Bluetooth Stereo Headphones, you must first pair them with an iPAQ Pocket PC with Bluetooth. To pair your headphones to a Pocket PC:1. Make sure the batteries are charged on both the headphones and the HP iPAQ Pocket PC.2. Make sure the headphones are turned off by pressing the Multi Function button in the center of the right earpiece of the headphones for about three seconds until the light flashes red and goes off.
HP iPAQ Bluetooth Stereo Headphones User’s Guide 53. On your Pocket PC, tap the iPAQ Wireless icon on the bottom right of the screen or, for older models, tap the Bluetooth icon 4. Turn on the Bluetooth Radio by tapping the Bluetooth icon. For older iPAQ Pocket PCs, turn on the Bluetooth Radio by tapping selecting “Turn Bluetooth ON” from the dropdown box in the bottom right corner of the screen.
HP iPAQ Bluetooth Stereo Headphones User’s Guide 65. Tap the Manager button in the Bluetooth section of the screen. For older iPAQ Pocket PC Models, tap the Bluetooth icon at the bottom right of the screen, and open the Bluetooth Manager. The following screen should appear:6. On the headphones, press and hold the Multi Function button in the center of the right earpiece for ten to fifteen seconds until the light flashes red and blue.7. The headphones are now in Pairing Mode. Release the button. The light will continue to flash red and blue.8. On the HP iPAQ Pocket PC, select New, then High Quality Audio Setup from connection types.
HP iPAQ Bluetooth Stereo Headphones User’s Guide 79. An icon will appear for the BT Headphones. Tap this icon.10. When your device discovers the headphones for the first time, you will be prompted for a Passkey. The Passkey is 0000 11. Tap OK.12. Tap Finish.13. When pairing is sucessful, the LED on the headphones will flash blue.14. If no pairing occurs in the next two minutes, the headphones will return to stand-by mode, and the LED will flash blue.
HP iPAQ Bluetooth Stereo Headphones User’s Guide 8Reestablishing Connection to the HeadphonesOnce your headphones have made an initial pairing with the iPAQ Pocket PC, you can reestablish the connection easily:1. Verify that the iPAQ Pocket PC Bluetooth Radio is turned on.2. Turn on the headphones by holding down the Multi Function button for about two seconds, until the blue light flashes. 3. On the iPAQ Pocket PC, play the audio file.4. Press the Multi Function button on the right earpiece of the headphones. They will re-connect with the Pocket PC and you will hear audio through the headphones.Note: You can also reconnect the headphones with the iPAQ pocket PC by going to the Bluetooth Manager and double tapping the High Quality Audio on BT-HeadphonesTurning the Headphones On and OffTo turn the Bluetooth Headphones on, push and hold the Multi Function button for two seconds until the blue light flashes.To turn the Bluetooth Headphones off, press and hold the Multi Function button for two seconds, until the light flashes red and goes off.Using the HP iPAQ Bluetooth Stereo HeadphonesTo play a song or other audio file, ensure that the headphones have a Bluetooth connection with the Pocket PC and simply play the file on your iPAQ Pocket PC.
HP iPAQ Bluetooth Stereo Headphones User’s Guide 9To pause audio, press the Multi Function buttonTo resume play, press the Multi Function button again.To track forward, press the Forward button, marked “>”To track backward, press the Back button marked “<“To increase the volume, press the Volume Up button marked “+”To decrease the volume, press the Volume Down button marked “-”Charging the HeadphonesNote: Headphone batteries are not user replaceable.To charge the HP iPAQ Bluetooth Stereo Headphones:1. Turn off the headphones by pressing the Multi Function button and holding until the light flashes red and goes off.2. Connect the Headphones to the power adapter.3. Plug the power adapter into an electrical outlet. The amber light will come on while the headphones are charging.4. When the headphones are fully charged, the light goes off. The headphones may take up to four hours to fully charge.
HP iPAQ Bluetooth Stereo Headphones User’s Guide 10Before Calling Technical SupportPerform a Soft Reset on the HP iPAQ Pocket PC by pressing the Reset button on the back or bottom of the HP iPAQ Pocket PC. For instructions, see the User’s Guide which came with your HP iPAQ Pocket PC.Perform a Soft Reset on the HP iPAQ Bluetooth Stereo Headphones by placing the tip of the stylus into the round hole next to the charging connector on the headphones. Technical Support on the InternetSupport services are available on the Internet through the HP Support Forum. You can either browse the postings as a guest, or register as a user and submit your own questions. HP responds to questions within one business day. To access the HP Support Forum, go to the HP website at http://www.hp.com/support/
HP iPAQ Bluetooth Stereo Headphones User’s Guide 11Preparing to Call Technical SupportIf you cannot solve a problem using the tips in this guide or the HP Support Forum, you may need to call technical support. Contact your local HP authorized dealer, reseller, or service provider for the technical support number in your area.To receive the fastest possible solution when you call, have the following available:■The Headphones and your Bluetooth device■Serial numbers for both devices■Purchase date on your invoice■Conditions under which the problem occurred■Error messages that might have appeared■Hardware configuration information■Hardware and software you are using
HP iPAQ Bluetooth Stereo Headphones User’s Guide 12Wireless NoticesIn some environments, the use of wireless devices may be restricted. Such restrictions may apply aboard airplanes, in hospitals, near explosives, in hazardous locations, etc. If you are uncertain of the policy that applies to the use of this device, please ask for authorization to use it prior to turning it on. ÅWARNING: Exposure to Radio Frequency RadiationThe radiated output power of this device is below the FCC radio exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact during normal operation is minimized. FCC ModificationsThe FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hewlett-Packard Company may void the user’s authority to operate the equipment.Canadian NoticeOperation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.European Union Regulatory NoticeThis product complies with the following EU Directives:■Low Voltage Directive 73/23/EEC■EMC Directive 89/336/EEC
HP iPAQ Bluetooth Stereo Headphones User’s Guide 13✎Note: CE Compliance of this product is valid only if powered with the correct HP-provided and CE marked AC Adapter.If this product has telecommunication functionality, it also complies with the essential requirements of:■R&TTE Directive 1999/5/ECCompliance with these directives implies conformity to applicable harmonized European standards (European Norms) which are listed on the EU Declaration of Conformity issued by Hewlett-Packard for this product or product family.This compliance is indicated by the following conformity marking placed on the product:The telecommunications functionality of this product may be used in the following EU and EFTA countries: Austria, Belgium, Cypress, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lichtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, and United Kingdom.Notice to France and Italy for Use of 2.4 GHz Wireless Communication:Italy:E’neccessaria una concessione ministeriale anche per l’uso del prodotto. Verifici per favore con il proprio distributore o direttamente presso la Direzione Generale Pianificazione e Gestione Frequenze. This marking is valid for non-Telecom products and EU harmonized Telecom products (e.g. Bluetooth). xxxx* This marking is valid for EU non-harmonized Telecom products . *Notified body number (used only if applicable - refer to the product label)
HP iPAQ Bluetooth Stereo Headphones User’s Guide 14Lisence required for use. Verify with your dealer or directly with General Direction for Frequency Planning and Management (Direzione Generale Pianificazione e Gestione Frequenze).France:L’utilisation de cet equipment (2.4 GHz Wireless LAN) est soumise a certaines restrictions: Cet Equipment peut etre utilise a L’interieur d’un batiment en utilisant toutes les frequences de 2400 a 2483.5 MHz (Chaine 1-13). Pour une utilisation en environment sxterieur, vous devez utiliser les frequences comprises entre 2454-2483.5 MHz (Chaine 10-13). Pour les Dernieres restrictions, voir http://www.art-telecom.frFor 2.4 GHz Wireless LAN operatin of this product, certain restrictions apply: This product may be used indoors for the entire 2400-2483.5 MHz frequency band (channels 1-13). For outdoor use, only 2454-2483.5 MHz may be used. For the latest requirements, see http://www.art-telecom.fr.Brazilian Regulatory NoticeEste equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência aproteção contra interferência a sistemas operando em caráter primário.
HP iPAQ Bluetooth Stereo Headphones User’s Guide 15Japanese Regulatory Wireless Notice
HP iPAQ Bluetooth Stereo Headphones User’s Guide 16Battery WarningÅWARNING: This device contains a lithium ion rechargeable battery. To reduce the risk of fire or burns, do not disassemble, crush, puncture, short external contacts, or dispose of in fire or waterWARNING: To reduce the risk of personal injury, electrical shock, fire or damage to the equipment:■Plug the AC Adapter into an electrical outlet that is easily accessible at all times. ■Disconnect power from the equipment by unplugging the AC Adapter from the electrical outlet or unplugging the Synchronization cable from the host computer.■Do not place anything on the AC Adapter cord or any of the other cables. Arrange them so that no one may accidentally step on or trip over them.■Do not pull on a cord or cable. When unplugging from the electrical outlet, grasp the cord by the plug or, in the case of the AC Adapter, grasp the AC Adapter and pull out from the electrical outlet. ■Do not use converter kits sold for appliances to power your iPAQ Pocket PC.

Navigation menu