Lee Technology Korea LTK-2000T FM PUSH BUTTON TX User Manual revised TK 2000T FM Push Button tx

Lee Technology Korea Co., Ltd. FM PUSH BUTTON TX revised TK 2000T FM Push Button tx

Users Manual

MODEL Name : LTK-2000TTrade Name : FM Push buttom TXE-mail: sales@leetek.orgWebsite: www.leetekorea.comLEE TECHNOLOGY KOREA CO., LTD.3rd Fl. 499-2, Sang3-dong, Wonmi-gu, Bucheon-city, Kyunggi-do, KoreaTel +82-32-324-9838 / Fax +82-32-324-9840Push Button Paging System - User Manual
▶ FEATURES & MERITSLTK-2000T▶ Simple paging system ▶ Easy usage▶ Use for paging of customers ▶ Creation of quiet atmosphere ▶ 1 ~ 90 transmitters setting per one pager ▶ Providing prompt service to customer ▶ PRODUCT SPEC▶ OPERATION OF SYSTEM▶ To page Staff 1) Just press CALL button of transmitter shortly. 2) Pager of staff will display “TABLE – Table No.” when it receive the signal from transmitter. 3) After transmitting is finished, red LED blinks once.▶ To cancel page (only 3 buttons transmitter) 1) Press CANCEL button. 2) The pager will show “CANCELED – Table No.”.BatteryModulationDimension (mm)Total Weight (g)FrequencyCode FormatPush Button Transmitter Button 1 or 3 ButtonDC 3VFM40 X 63 1423433.92POCSAG CodeFeatureMeritCUSTOMERSTAFFDirect CallImmediate ServiceTop-view Pager Push Button Transmitter
▶ SETTING PROCESS1) Press the Button 1 on ‘[READY]’. (more than 3 seconds) → Pager will display ‘SET TABLE’.2) Press the Button 1. (more than 3 seconds) → The pager will proceed to Number Setting menu and display ‘SET NUM B001’. * ‘B’ of B001 means that No.1 transmitter is not stored in this pager. 3) Press call button of a transmitter. → The pager will display 'SETTING 001'. Then, it will change ‘SET NUM:001’ → ‘SET NUM:B002’4) To exit Setting mode : ① Press the Button 2 on 'SET NUM:B001'. (more than 3 seconds) → The pager will proceed to Number Delete Menu. ② Move to 'STAND BY' menu by pressing the Button 1. ③ Press the Button 1 once for less than 1 second.※ To move another setting number, press the Button 1 or 2 on “SET NUM:B001”. ( ‘+’ → Button 1, ‘-‘ → Button 2 )※ Change number setting : Delete number setting → Restart setting for another number. ※ You can set 1 transmitter for only 1 number.▶ DELETE PROCESS1) Practice the No. 1, 2 of Setting Process. → The pager will display ‘SET NUM:001’.2) Press the Button 2 on the display 'SET NUM:001'. (more than 3 seconds) → The pager will proceed to Number Delete Menu. 3) Delete Menu consists of ‘DELETE’, ‘DELETE ALL’, ‘STAND BY’. Press the Button 1 for less than 1 second to move another menu. 4) Press the Button 2 on the ‘DELETE’. (more than 3 seconds) → The pager will display ‘SET NUM:B001’ after showing ‘DELETED’.5) If you want to delete all number in the pager, Press the Button 2 on ‘DELETE ALL’. (more than 3 seconds) → The pager will show ‘SET NUM:B001’ after showing ‘DELETED’6) To exit Delete mode : ① Press the Button 2 on 'SET NUM:B001'. (more than 3 seconds) → The pager will proceed to Number Delete Menu. ② Move to 'STAND BY' menu by pressing the Button 1. ③ Press the Button 1 once for less than 1 second.Button - 1Button - 2LCD Display12 DigitPress the Button 1 (3 seconds)Press the Button 1 (3 seconds)Press call button of a transmittercompleted setting :going on setting :Standby mode :1)2)3)Press the Button 2 (3 seconds)Move to another menu :Press the Button 1 (1 second)Practice the menu :Completed “DELETE” functionStand by mode for pagingButton - 1Button - 2LCD DisplayNSET UM 0 01NSTA D BYDE L E TEDE L E T EDLDE L E TE A LSET TABLENSET UM B0 01SETT ING 001001NSET UMNSET UM 0 02B2)5)6)4)RE ADY[]12 DigitRE ADY[]NSET UM B0 01
▶ NOTICE & WARRANTYTHIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS :(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.IMPORTANT SAFTEY INFORMATIONRF EXPOSURE STATSURE STATEMENTYour Pager Transmitter contains a radio frequency transmitter.When the button is pushed the transmitter sends our RF singnals.CAUTION : To comply with FCC RF exposure compliance requirements,A separation distance of at least 8 inches(20Cm) must be maintainedBetween the antenna of this transmitter and all persons, duringNormal operation. The antenna used for this transmitter must not be co-Located or operating in conjunction with any other antenna of transmitter.Unauthorized antennas, modifications, of attachments could damage theTransceiver and may violate FCC regulations.NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCECAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER�S AUTHORITY TO OPERATE THE EQUIPMENTFor a Class A digital device or peripheral, the instructions frnished the user shall includeThe following or similar statement, placed in a prominent location in the text of the manual: Note : This equipment has been tested and found to comply with the limits for a Class ADigital device. Pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful in a commercial environment. This equipment generates. Uses, and can radiateradio frequency energy and, if not installed and used in accordance with the instruction manual, may causeharmful interference to radio communications. Operation of this equipment in a residential area is likely tocause harmful interference in which case the user will be required to correct the interference at his ownexpense.

Navigation menu