Latitude 714 HEART RATE CHEST STRAP User Manual

Latitude Limited HEART RATE CHEST STRAP

User Manual

75  mmSize 90 x 75 mmType: book typeCover page : 4 pages Body: 8 pages Total page : 12 pages           color: 1C+1C (Black)           paper: 100 gsm white wood free paperBinding: Saddle wirePaper: Wood free paperPaper weight: 100 gsm:folding linesaddle wire90 mm 90 mmBluetooth Chest Strap Heart Rate Sensor : Instruction Manual    -              A93806      ART12 0256      Project no:MKT12023      Prepared by: Grace   Copyright: Latitude Limited     Date: 07  Aug 2012  Prepared by: Date:Date:Date:Checked by:Approved by:
Bluetooth Chest StrapHeart Rate SensorInstruction ManualFront CoverBack Cover
CARE MAINTENANCEThis heart rate sensor is a high-tech instrument that should be handled with care. Follow the caring instructions to ensure reliable measurement and to maximize the life span of the heart rate sensor. It is advisable to use the unit and the chest strap in conformity with the following instructions:Connector: Detach the connector from the strap after every use and dry it with a soft towel. Clean the connector with a mild soap and water solution when needed. Never use alcohol or any abrasive material such as steel wool or cleaning chemicals.Strap: Rinse the strap under running water after every use and hang to dry. Clean the strap gently with a mild soap and water solution when needed. Do not use moisturising soaps as they can leave reside on the strap. Do not soak, iron, dry clean or bleach the strap. Do not stretch the strap or bend the electrode areas sharply.Dry and store the strap and the connector separately to maximize the heart rate sensor battery lifetime. Keep the heart rate sensor in a cool and dry place. Do not store the heart rate sensor wet in non-breathing material, such as a sports bag, to prevent snap oxidation. Do not expose the heart rate sensor to direct sunlight for extended periods.Remove the battery from the battery case when the unit or the chest strap WILL NOT be used  for a long time.A. Introduction:  A-04WARNING!A. Introduction:  A-02Make sure that fully understand the functions and limitations of this product before using it. Consult a doctor or trainer for setting the zone prior to undergo an serious Cardio-fitness training.This product is an supplementary device for heart rate measurement, and it is NOT a substitute for getting the heart rate reading from a doctor.If the heart rate condition is in doubt, consult your doctor. Avoid exposing the product to the extreme conditions. Avoid rough uses or severe impacts to the product. FCC Compliance StatementA. Introduction:  A-03- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation.- WARNING: Changes or modifications to this watch not expressly approved by the party responsible for compliance could void the user’s right to operate the equipment.- NOTE: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and radiates radio frequency energy. If it is not installed and used in accordance with the instructions, it may cause harmful interference to radio communications.- However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is recommended to reduce the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation space between the watch and the receiver.- Consult the dealer or an experienced radio/TV technician for help.(For US)  A. Introduction:  A-01Thank you for purchasing this Bluetooth Chest Belt Heart Rate Sensor. This product enables training in a group without interference from other heart rate sensors.
NOTE: Keep batteries away from children. If swallowed, contact a doctor immediately.CAUTION: Risk of explosion if battery is replaced by an incorrect type.1Turn the cover counter- clockwise with a coin gently until it pops out.2Remove the exhausted battery and insert a new one (CR2032) with (-) side against the metal contact.4Turn the cover clockwise with the coin again until the little arrow pointed to the dot.B. Setting Up:  B-03Batteries:All connectors have user changeable batteries. To change the battery yourself, follow the instructions below, and see the markings on the connector. OPENCR2032CR2032OPENOPEN3Press the cover back into the connector.OPENCR2032CR2032Make sure the battery is placed under the golden slot.2a2b B. Setting Up:  B-02Getting Started:The heart rate sensor is compatible with Bluetooth® smart and Bluetooth® smart ready devices. It may require a separate application to view heart rate data on the receiving device, such as a watch or a mobile phone. Pair the heart rate sensor with the receiving device when using it for the first time.Keep the receiving device in front of you to ensure sufficient transmission range from the heart rate sensor to your device, such as in a front pocket or fixed on a belt.DO NOT wear the receiving device on your back, such as in a back pocket or backpack. B. Setting Up:  B-01Wear the Heart Rate Sensor: 1Moisten the electrode areas of the strap.2Attach the connector to the strap.3Adjust the strap length to fit tightly but comfortably.4Tie the strap around your chest just below the chest muscles, and attach the hook to the other end of the strap.5Check that the moist electrode areas are firmly against your skin and that the logo of the connector is in a central and upright position.NOTE: Detach the connector from the strap and rinse the strap under running water after every use. Sweat and moisture may keep the electrodes wet and the transmitter activated. This will reduce the transmitter battery life.1    Chest Strap2    ConnectorElectrode areasHookOPENBattery doorButtonsFront BackNaming of the parts: This product includes 2 parts:Chest Strap: To be tied around the bodyConnector: To send the heart rate signal to the receiving device.Electrode areas: To detect heart rate.Hook: To fix the strap on user’s chestButtons: To attach the connector to the strapBattery door: To cover the battery compartment A. Introduction:  A-05
Operating temperature : -10°C to +50°C   *** CAUTION Battery Safety Information - Exhausted batteries are to be removed - Do not dispose of product or batteries in fire; batteries may explode or leak - If this product will not be used for an extended period of time, remove the batteries from the product - The supply terminals are not to be short-circuited - Batteries are to be inserted with correct polarity - Clean the battery contacts and also those of the product prior to battery installation - As always, dispose of batteries in an eco-friendly manner   This product is compliant with Directives 1999/5/EC.

Navigation menu