Landis Gyr Technologies HUNTSU825 3G S4e Gridstream User Manual 98 9103

Landis+Gyr Technologies, LLC 3G S4e Gridstream 98 9103

Contents

Exhibit D - Product Ship Sheet

Landis+Gyr Confidential Information 98-9103 Rev AA 13G S4e GridstreamEndpoint withZigBee Data SheetGeneralThe 3G S4e Gridstream endpoint is designed to accommodate Landis+Gyr S4e poly-phase meters for use in commercial and light industrial services. The S4e Advanced Function meter is an Active Energy kWh/kW/TOU Meter. The meter features Digital Multiplication Measurement Technique, meets ANSI standards for performance and utilizes ANSI C12.19 protocol (between meter and AMR device). Can be deployed with or without ZigBee.Display Options• Energy Metrics: +kWh, -kWh, Net kWh, and added kWh (Security).Figure 1. The 3G S4e Gridstream Endpoint Module and the Landis+Gyr S4e MeterFCC Compliance InformationModel: FASY-0825FCCID: TEB-HUNTSU825IC: 5931A-HUNTSU825
3G S4e Gridstream Endpoint with ZigBee Data Sheet Landis+Gyr2 98-9103 Rev AA Landis+Gyr Confidential InformationCompliance Statement (Part 15.19) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference, and2. This device must accept any interference received, including interference that may cause undesired operation.Endpoint LocationTo comply with FCC’s RF exposure limits for general population/uncontrolled exposure, the antenna(e) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter.Endpoint UsageThe 3G S4e Gridstream endpoint will be used:• for commercial and light industrial metering applications.• at homes and businesses.The 3G S4e Gridstream endpoint requires professional installation by qualified personnel.RF InterferenceThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the meter off, the user is encouraged to try to correct the interference by one or more of the following measures: • Re-orient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Consult Landis+Gyr or an experienced radio/TC technician for help.Changes or modifications not expressly approved by Landis+Gyr could void the user’s authority to operate the equipment.
Landis+Gyr 3G S4e Gridstream Endpoint with ZigBee Data SheetLandis+Gyr Confidential Information 98-9103 Rev AA 3Required SoftwareTo work with the endpoint, you need one of the following software tools:• Command Center ver. 4.1 or greater• RadioShop. • Network Configuration Manager.• Landis+Gyr 1132Prog application.• Endpoint Testing Manager.• Endpoint Implementation Manager.SpecificationsTable 1. 3G S4e Gridstream Endpoint SpecificationsCategory Specification Value or RangeCompatible MetersLandis+Gyr S4e Supported Meter FormsForm Class Form Class3S 20 16SE 3205S/45S 20 16/15K 4806S/36S 209S/8S 202S 20012S 20016S/15S 20025S 20012SE 320ElectricalVoltage 10.5-13.5V (from the meter’s power supply)Power Max: 2.5WTypical: 0.5WRF 900 MHzOutput Power +26 dBm +/-1 dBmAdjacent Channel Power 39 dBc NominalTransmit Frequency 902 to 928 MHz ISM unlicensed (FCC Part 15)Communication Protocol Gridstream Protocol for Command CenterReceive Sensitivity -108 dBm minimumRF ZigBeeOutput Power +20 dBm +/-1Adjacent Channel Power 40 dBc MinimumTransmit Frequency 2405-2480 MHzCommunication Protocol ZigBee ProtocolReceive Sensitivity -104 dBm minimum
3G S4e Gridstream Endpoint with ZigBee Data Sheet Landis+Gyr4 98-9103 Rev AA Landis+Gyr Confidential InformationStandards ComplianceFCC Title 47 CFR Part 15 Radiated and Conducted Emissions (incl. intentional radiators)IEC 61000 4-2,3,4,5,11,12 Electromagnetic CompatibilityANSI C12.19 Compatible with Utility Industry End Device TablesANSI C12.20 National Standard for Electricity Meters - 0.2 and 0.5 Accuracy ClassesANSI C12.21 Code for Electricity Metering ANSI C37.90.1 (1989) Standard Surge Withstand Capability (SWC) TestsANSI C12.22 Transport of ANSI C12.19 Over Network TransmissionsEnvironmentalGeneral Environmental Outdoor, rain-protected, sunlight-exposedOperating Temperature Range -40 to +70 C (under meter glass)Humidity 0 to 95% relative humidity, non-condensingMechanical SizeWeightContact InformationTechnical Support:1-888-390-5733 Internet:www.landisgyr.com Fax1-218-562-5530 E-mail:solutionsupport.na@landisgyr.comTable 1. 3G S4e Gridstream Endpoint SpecificationsCategory Specification Value or Range

Navigation menu