Laird Connectivity RM191 RM191-SM User Manual Reference Antenna Info A

Laird Technologies RM191-SM Reference Antenna Info A

Reference Antenna Info A

 915 MHz PCB Notch Antenna  Datasheet The information in this document is subject to change without notice. Confirm the data is current by downloading the latest revision from www.lsr.com.  330-0016-R0.1    Copyright © 2017 LSR  Page 1 of 3 902 MHz - 928 MHz PCB Notch -1 dB Antenna   SPECIFICATIONS Specification Value Peak Gain  -1.5 dBi Average Gain > - 3.7 dBi Impedance 50 ohms, Nominal Type PCB Trace Notch Polarization Linear Vertical VSWR ≤3.0:1, Maximum  Frequency 902 - 928MHz Size 60 ×16 mm Operating Temp -40°C to +85°C Table 1 Specifications
 915 MHz PCB Notch Antenna  Datasheet The information in this document is subject to change without notice. Confirm the data is current by downloading the latest revision from www.lsr.com.  330-0248-R0.1    Copyright © 2017 LSR  Page 2 of 3 MATCHING CURCUIT  Components R13 = NP C16 = 13nH ± 2% MFG PN:  LQW15AN13NG80D R19 = NP
 915 MHz PCB Notch Antenna  Datasheet The information in this document is subject to change without notice. Confirm the data is current by downloading the latest revision from www.lsr.com.  330-0248-R0.1    Copyright © 2017 LSR  Page 3 of 3 CONTACTING LS RESEARCH Headquarters  LS Research, LLC   W66 N220 Commerce Court   Cedarburg, WI 53012-2636   USA   Tel: 1(262) 375-4400   Fax: 1(262) 375-4248 Website  www.lsr.com Technical Support  forum.lsr.com Sales Contact  sales@lsr.com                       The information in this document is provided in connection with LS Research (hereafter referred to as “LSR”) products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is  granted by this document or in connection with the sale of LSR products. EXCEPT AS SET FORTH IN LSR’S TERMS AND CONDITIONS OF SALE LOCATED ON LSR’S  WEB  SITE,  LSR  ASSUMES  NO  LIABILITY  WHATSOEVER  AND  DISCLAIMS  ANY  EXPRESS,  IMPLIED  OR  STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS  FOR  A  PARTICULAR  PURPOSE,  OR  NON-INFRINGEMENT.  IN  NO  EVENT  SHALL  LSR  BE  LIABLE  FOR  ANY  DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF LSR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. LSR makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. LSR does not make any commitment to update the information contained herein. Unless specifically provided otherwise, LSR products are not suitable for, and shall not be used  in,  automotive  applications.  LSR’s  products  are  not  intended,  authorized,  or  warranted  for  use  as  components  in applications intended to support or sustain life.

Navigation menu