La Crosse Technology TX141TH-AV2 Transmitter User Manual x

La Crosse Technology Ltd. Transmitter x

Users Manual

Model: 308-1711BLwww.lacrossetechnology.com/supportPage | 2 Model:308-1711BL Quick Setup Guide DC: 071614 WIRELESSWEATHER STATION Outdoor Temp/Humidity with Trend Time, Calendar + Alarm Moon Phase BUTTONS BACK VIEW OUTDOORSENSOR TX141TH-AV2 Sensor Battery Compartment 2 “AA” Temperature Alerts Indoor Temp/Humidity with Trend LED TX Battery Compartment 2“AA”
Model: 308-1711BLwww.lacrossetechnology.com/supportPage | 2 Get Started Step 1:Insert the 2 new AA batteries (not included) into the TX141TH-AV2outdoor sensor. Observe the correct polarity. The red LED will flash during transmission. Step 2: Insert the 2new AAAlkaline batteries (not included) into the weatherstation. Observe the correct polarity. Restart: If there is no outdoor temperature data after 3 minutes, unplug the AC adapter and remove batteries from the weather station &outdoorsensorfor 15 minutes. Return to Step 1 above. Set Time, Date, Temperature Unit 1. Hold the TIME/DATE button to enter time set mode. 2. Press the ▼ or ▲ buttons to adjust the values. 3. Press the TIME/DATE button to confirm adjustments and move to the next item. Time setting order: 1. Year 2. Month 3. Date 4. 12/24 hour time format 5. Hour 6. Minutes 7. Fahrenheit/Celsius Press the TIME/DATE button to exit, or wait 20 seconds without pressing buttons to return to the normal time display. Set Indoor and Outdoor Temperature Alerts 1. Hold the TEMP ALERTS button until the station beeps. 2. The temperature alert value will blink in set mode. 3. Press the ▼ or ▲ buttons to adjust the values. 4. Press the TEMP ALERTS button to confirm & move to the next alert. The temperature alert order: 1.Outdoor High, 2.Outdoor Low, 3. Indoor High,4. Indoor Low Press the TEMP ALERTS button to exit, or wait 20 seconds without pressing buttons to return to normal time display. Arms/Disarms Temperature Alerts
Model: 308-1711BLwww.lacrossetechnology.com/supportPage | 3 Alarm Bell Icon Press andrelease the TEMP ALERTS button to toggle between the alerts OutdoorHI/OutdoorLOW/Indoor HI/Indoor LOW. • Press the ▲ button to arm the alert. • Press the ▼ button to disarm the alert. • ALERT BELL ICON appears when armed. Active Temperature Alert • Beeps for 5 seconds, once per minute until out of range. • The corresponding alert bell will flash. • Press any button to stop the alert. Set Time Alarm 1. Hold the TIME ALARM button to enter alarm time set mode. 2. Press the ▼ or ▲ buttons to adjust the values. 3. Press the TIME ALARM button to confirm &move to the next item. Alarm Time setting order:1.Hours, 2. Minutes Activate/Deactivate Time Alarm • Press the TIME ALARM button once to view alarm time. • Press the TIME ALARM button again to activate the alarm. Once activated, the bell icon appears. • Press the TIME ALARM button again to deactivate the alarm. The bell icon will disappear. Snooze (Silences Alarm Temporarily) • When alarm sounds, press the SNOOZEbuttonto silence the alarm for 10 minutes. • The alarm bell iconwill flash. • In snooze mode, press any button except TIME ALARM to stop alarm for one day. Note: The alarm is crescendo sound. The alarm soundsfor 2 minutes and then shut off completely. Heat Index/Dew Point • Press the HEAT/DEWbutton once to view Heat Index. • Press the HEAT/DEWbutton twice to view Dew Point. Moon Phase
Model: 308-1711BLwww.lacrossetechnology.com/supportPage | 4 Moon phase based on lunar calendar, and time and date set on the weather station. View/Reset MIN/MAX Values The station automatically resets minimum and maximum values daily at midnight(12:00 AM). • Press the ▼ button to view minimum values. • Holdthe ▼ button to manually resetminimum values. • Press the ▲ button to view maximum values. • Holdthe ▲ button to manually reset maximum values. Temperature Trend Indicators Temperature (2°F/1°C)trend indicators update about every 30 minutes. • Temperature has risen in the past 3 hours. • Temperature has not changed in the past 3 hours. • Temperature has fallen in the past 3 hours. Search for Outdoor Sensor • Holdthe HEAT/DEWbutton to search for the outdoorsensor. • The strength signal icon will animate until the sensor signal is received or for 3 minutes if no signal available. Low Battery Icon Low battery icon indicates low battery for station or sensor. • If the icon is displayed in the Outdoor Temperature section, replace batteries in the outdoor sensor. • If the icon is displayed in the Indoor Temperature section, replace batteries in the Weather Station. Outdoor Sensor Positioning • Mount the Outdoor Sensor on a north-facing wall or in any well shaded area. Under an eave or deck rail is preferred. • The maximum wireless transmission range to the weather station is over 300 feet (91 meters) in open air, not including walls or floors. • Be sure the outdoor sensor is mounted vertically Specifications Low Battery Icon
Model: 308-1711BLwww.lacrossetechnology.com/supportPage | 5 Indoor Temperature Range: +32°F to +122°F (0°C to 50°C) Humidity Range: 1%-99% (RH) Outdoor Temperature Range: -40°F to 140°F (-40°C to 60°C) Alkaline Batteries: -20°F to 140°F (-29°C to 60°C) Lithium Batteries: -40°F to -20°F (-40°C to -29°C) NOTE: Temperatures below - 20°F (-29°C) require Lithium batteries in the outdoor sensor Humidity Range: 1%-99% (RH) Distance: Over 300 ft. (91 meters) RF 433MHz (open air) Power Weather Station 2-AA, IEC, LR6 batteries (not included) TX141TH-Av2 Outdoor Sensor: 2-AA, IEC, LR6 batteries (not included) Battery Life Weather Station Battery Backup: Battery life is over 12 months when using reputable battery brands TX141TH-Av2 Outdoor Sensor: Battery life is over 24 months when using reputable battery brands for both Alkaline and Lithium batteries Dimensions Weather Station: 5.40” L x 1.68” W x 4.40” H (137.2 mm L x 42.8 mm W x 111.8 mm H) TX141TH-Av2 Outdoor Sensor: 1.57"L x 0.79"W x 5.12"H (40 x 20 x 130mm) Weather Station Care & Maintenance • Do not mix old and new batteries • Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries • Always purchase the correct size and grade of battery most suitable for intended use. • Replace all batteries of a set at the same time. • Clean the battery contacts and also those of the device prior to battery installation. • Ensure the batteries are installed with correct polarity (+and -). • Remove batteries from equipment which is not to be used for an extended period. • Remove expired batteries promptly. • Do not expose to extreme temperature, vibration or shock. • Clean with a soft damp cloth. Do not use solvents or scouring agents. • The product is not a toy. Keep it out of reach of children. • The product is not to be used for medical purpose or for public information. It is intended for home use only. • The specs of this product may change without prior notice. • Improper use or unauthorized opening of housing voids warranty. • If the product is not working properly, change the batteries. Warranty and Support Information
Mod La Cron th Viewwww. For wLa Cr2830La Cr Cont608-7 Prodwww. FCC This edevicreasoequipused commparticteleviis enc• • • • This dtrans(1) th(2) thmay Any Ccomp FCC This eenviroother CautThe munauautho del: 308-1711rosse Technologis productrelatinw full warranty d.lacrossetechnowarranty work,rosse Technolog South 26th St. rosse, WI 5460tact Support: 782-1610 uct Registratio.lacrossetechnoStatement equipment has ce, pursuant to ponable protectiopment generatesin accordance munications. Hocular installationision reception, couraged to try Reorient or reloIncrease the seConnect the eqreceiver is connConsult the deadevice must notmitter. Operatiohis device mayhis device muscause undesirChanges or modpliance could voC Radiationequipment comonment. This trar antenna or tranion! manufacturer is thorized modificority to operate t1BLwww.lacrgy, Ltd. providesng to manufactudetails online aology.com/warra technical supgy, Ltd 1 on: ology.com/suppobeen tested anpart 15 of the FCon against harms, uses and canwith the instructowever, there is n. If this equipmewhich can be dto correct the inocate the receiveparation betwequipment into annected. aler or an expert be co-located on is subject toy not cause harst accept any inred operation.difications not eoid the user’s aun Exposuremplies with FCC ansmitter must nsmitter. not responsiblecations to this ethe equipment.rossetechnols a 1-year limiteuring defects in at: anty_info.pdf port or other inProtected5,978,738Online Prwww.lacroort/register d found to compCC Rules. Thesful interference n radiate radio frtions, may causno guarantee thent does causedetermined by tunterference by oing antenna. en the equipmen outlet on a circrienced radio/TVor operating in o the followingrmful interferennterference recexpressly approvuthority to operae Statemenradiation exposnot be co-locatee for any radio oquipment. Suchlogy.com/suped time warrantymaterials & wornformation cond under U.S. Pa8, 6,076,044, & Rroduct Supportossetechnology.ply with the limitse limits are desin a residential requency energse harmful interfhat interference harmful interfeurning the equipone or more of tent and receivercuit different froV technician for conjunction withg two conditionnce, and ceived, includinved by the partyate the equipment: sure limits set foed or operatingor TV interferench modifications cpportPage | 6y (from date of prkmanship. ntact: atents: RE43903 t: com/support ts for a Class B signed to providinstallation. Thigy and, if not insference to radioe will not occur irence to radio opment off and onthe following mer. m that to which help. h any other antens: ng interferencey responsible font. orth for an unconin conjunction wce caused by could void the u6 purchase) digital e is stalled and o n a or n, the user easures: the enna or e that or ntrolled with any user
Model: 308-1711BLwww.lacrossetechnology.com/supportPage | 7 All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using electronic, mechanical or chemical process without the written permission of the publisher. This booklet may contain errors or misprints. The information it contains is regularly checked and corrections are included in subsequent editions. We disclaim any responsibility for any technical error or printing error, or their consequences. All trademarks and patents are recognized. IC RSS warning This device complies with Industry Canada licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that, the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de modèle s'il fait partie du matériel de catégorie I) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal etl'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. IC Radiation Exposure Statement:
Model: 308-1711BLwww.lacrossetechnology.com/supportPage | 8 This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC exposition aux radiations: Cet équipement est conforme avec IC les limites d'exposition aux rayonnements définies pour un contrôlé environnement. Cet émetteur ne doit pas être co-localisés ou fonctionner en conjonction avec une autre antenne ou émetteur.

Navigation menu