LM Technologies LM505U BLUETOOTH USB ADAPTER User Manual LM505 Datasheet FCC

LM Technologies Ltd. BLUETOOTH USB ADAPTER LM505 Datasheet FCC

USERS MANUAL

LM505 Page 1 of 3 +44(0)207 428 2647 | www.lm-technologies.com | sales@lm-technologies.com Product: LM505Part No: 505-0511Datasheet Rev 1.0/25-07-12 1 Features• Compable with Bluetooth v2.1+EDR specificaon. Backward compable with Bluetooth 2.0 + EDR devices• Support Maximum Asynchronous Data Rate 3 Mbps• Provide data access via USB 2.0 interface• Low power consumpon• 2.4 - 2.4835 GHz ISM Band Operaon• Very small Size (23 mm x 20 mm)• Class 2 adapter with upto 10 m in open space• Wide range of Bluetooth profiles supported (like HF, A2DP, OPP, FTP, DUN, PAN, SPP profiles etc)• Eliminates the need of cable between your computer and other Bluetooth Devices• Stereo Audio supported. VoIP calls over Bluetooth also supported • Interoperable with PDAs, Phones• Supported by Windows XP, VISTA & 7 Bluetooth Driver. No need for an addional driverLM505 USB Adapter 2 DescriptionLM505 EDR Nano USB Adapter is one of the world’s smallest adapter which fits discreetly into the USB port of a Laptop or PC.This is a very small form factor and high performance adapter which allows you to connect to upto 7 Bluetooth devices simultaneously.The adapter integrates high performance Bluetooth Radio, Baseband, Link Manager, Host Controller Interface and can be used with Widcomm Soware or Windows Bluetooth Driver which offers a huge range of Bluetooth profiles for variety of connecvityapplicaons. The adapter is ideally suited for Bluetooth connecvity to serial adapter, laptops, PC, Mono and stereo headsets.Due to its small size, high performance, low power consumpon and high sensivity this adapter is ideally suited for Bluetooth connecvity applicaons where the adapter can fit discreetly into portable devices that have USB port. This adaptercan also be embedded in other products in modular form by removing the housing and USB connector. LM Technologiesalso produces the modular form of this product called LM505 Module.Bluetooth HCI USB Nano Adapter with Broadcom ChipBT v2.1 USB Adapter
LM505 Page 2 of 3 +44(0)207 428 2647 | www.lm-technologies.com | sales@lm-technologies.com3 Packaging Options 4 General SpecificationProduct: LM505Part No: 505-0511Datasheet Rev 1.0/25-07-121x Bluetooth USB Adapter AO - Adapter Only Part No 505-0511 SpecificaonDescriponProduct Name LM505 Bluetooth USB Nano AdapterChipset Broadcom BCM2046Bluetooth StandardBluetooth v2.1 + EDRFrequency Band 2.4 - 2.4835 GHz ISM Band Modulaon MethodGFSK for 1 Mbps, π/4-DQPSK for 2 Mbps, 8-DPSK for 3 MbpsSpread SpectrumFHSS (Frequency Hopping Spread Spectrum)Transfer Rate (Max)3 Mbps enhanced data rateRF Output PowerClass 2 Working Distance 10 m - 25 m in open spaceRx Sensivity -80 dBm at 0.1 % BER Input Voltage DC 5V (via USB port)I/O InterfaceUSB 2.0LED indicatorPower/AcveOS SupportWin XP/VISTA/7Size 23(L) x 19(W) x 8(H) mmSoware/Drivers Windows XP/VISTA/7, WidcommBluetooth Profiles GAP,SPP,HSP, HFP, DUN, FTP, FAX, PAN, LAN, HID, SYNC, HCRP, A2DP, AVRCP,BIP, GOEP, SDAP, OPP 5 FCC Regulation StatementThis device complies with Part 15 and 15B of the FCC Rules. Operaon is subject to the following two condions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operaon This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of theFCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separaon between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Installaon and use of this device must be in strict accordance with the instrucons included in the user documentaon provided with the product. Any changes or modificaons (including the antennas) made to this device that are not expressly approved by themanufacturer may void the user’s authority to operate the equipment. The manufacturer is not responsible for any radio or
television interference caused by unauthorized modificaon of this device, or the substuon of the connecng cables andequipment other than manufacturer specified. It is the responsibility of the user to correct any interference caused bysuch unauthorized modificaon, substuon or aachment.Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violaon of government regulaons arising from failing to comply with these guidelines. This equipment complies with FCC radiaon exposure limits set forth for an uncontrolled environment. This transmier must not be co-located or operang in conjuncon with any other antenna or transmier. LM505 Page 3 of 3 +44(0)207 428 2647 | www.lm-technologies.com | sales@lm-technologies.comProduct: LM505Part No: 505-0511Datasheet Rev 1.0/25-07-12

Navigation menu