LM Technologies LM505 BLUETOOTH HCI USB MODULE User Manual LM505 Module Datasheet FCC

LM Technologies Ltd. BLUETOOTH HCI USB MODULE LM505 Module Datasheet FCC

User Manual

LM505-M Page 1 of 3 +44(0)207 428 2647 | www.lm-technologies.com | sales@lm-technologies.com Product: LM505 ModulePart No: 505-0513Datasheet Rev 1.0/25-07-12 1 Features• Easily integrated in Embedded Devices• Compable with Bluetooth v2.1+EDR specificaon. Backward compable with Bluetooth 2.0 + EDR devices• Support Maximum Asynchronous Data Rate 3 Mbps• Provide data access via USB 2.0 interface• Low power consumponLM505 USB Module 2 DescriptionLM505 EDR Bluetooth HCI ROM Module is an ideal soluon for providing Bluetooth connecvity to embedded devicesrunning an OS with Bluetooth Stack like Embedded Linux with BlueZ support.This is a very small form factor and high performance module which allows you to connect to upto 7 Bluetooth devices simultaneously.The module integrates high performance Bluetooth Radio, Baseband, Link Manager, Host Controller Interface and can be used with embedded Bluetooth Stacks which offers a huge range of Bluetooth profiles for variety of connecvityapplicaons. Due to its small size, high performance, low power consumpon and high sensivity this adapter is ideally suited for Bluetooth connecvity applicaons where the adapter can fit discreetly into portable devices that have USB interface. Bluetooth HCI ROM USB Module with Broadcom ChipBT v2.1 USB Module• Very small Size (19.7 mm x 10 mm)• Supported on Embedded Linux BlueZ Stack• Stereo Audio supported. VoIP calls over Bluetooth also supported • Interoperable with PDAs, Phones• Class 2 device with 10 m range
LM505-M Page 2 of 3 +44(0)207 428 2647 | www.lm-technologies.com | sales@lm-technologies.com3 Packaging Options 4 General SpecificationProduct: LM505 ModulePart No: 505-0513Datasheet Rev 1.0/25-07-121x Bluetooth USB Module Tape and Reel or Tray Part No 505-0513 SpecificaonDescriponProduct Name LM505 Bluetooth HCI USB ModuleChipset Broadcom BCM2046Bluetooth StandardBluetooth v2.1 + EDRFrequency Band 2.4 - 2.4835 GHz ISM Band Modulaon MethodGFSK for 1 Mbps, π/4-DQPSK for 2 Mbps, 8-DPSK for 3 MbpsSpread SpectrumFHSS (Frequency Hopping Spread Spectrum)Transfer Rate (Max)3 Mbps enhanced data rateRF Output PowerClass 2 Working Distance 10 m - 25 m in open spaceRx Sensivity -80 dBm at 0.1 % BER Input Voltage DC 5V (via USB interface)I/O InterfaceUSB 2.0LED indicatorPower/AcveOS SupportEmbedded Linux or WinCE with Bluetooth Stack supportSize 19.7 (L) x 10(W)Soware/Drivers Linux BlueZ, Windows CE, Windows Mobile Bluetooth DriverBluetooth Profiles GAP,SPP,HSP, HFP, DUN, FTP, FAX, PAN, LAN, HID, SYNC, HCRP, A2DP, AVRCP,BIP, GOEP, SDAP, OPP 5 FCC Warning StatementThis device complies with Part 15 of the FCC Rules. Operaon is subject to the following two condions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operaon.NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenalinstallaon. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordancewith the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interferencewill not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference byone or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separaon between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.NOTE 2: Any changes or modificaons to this unit not expressly approved by the party responsible for compliance couldvoid the user's authority to operate the equipment.
This equipment complies with FCC radiaon exposure limits set forth for an uncontrolled environment. End users must followthe specific operang instrucons for sasfying RF exposure compliance.Note 1: This module cerfied that complies with RF exposure requirment under portable or mobile or fixed condion,this module is to be installed only in portable or mobile or fixed applicaons.A portable device is defined as a transming device designed to be used so that the radiang structure(s) of the deviceis/are within 20 cenmeters of the body of the userA mobile device is defined as a transming device designed to be used in other than fixed locaons and to generallybe used in such a way that a separaon distance of at least 20 cenmeters is normally maintained between the transmier'sradiang structure(s) and the body of the user or nearby persons. Transming devices designed to be used by consumers orworkers that can be easily re-located, such as wireless devices associated with a personal computer, are considered to be mobiledevices if they meet the 20 cenmeter separaon requirement.A fixed device is defined as a device is physically secured at one locaon and is not able to be easily moved to another locaon.Note 2: Any modificaons made to the module will void the Grant of Cerficaon, this module is limited to OEM installaononly and must not be sold to end-users, end-user has no manual instrucons to remove or install the device, only soware oroperang procedure shall be placed in the end-user operang manual of final products.Note 3: The device must not transmit simultaneously with any other antenna or transmier.Note 4: To ensure compliance with all non-transmier funcons the host manufacturer is responsible for ensuring compliancewith the module(s) installed and fully operaonal. For example, if a host was previously authorized as an unintenonalradiator under the Declaraon of Conformity procedure without a transmier cerfied module and a module is added, thehost manufacturer is responsible for ensuring that the aer the module is installed and operaonal the host connues to becompliant with the Part 15B unintenonal radiator requirements. Since this may depend on the details of how the moduleis integrated with the host, LM Technologies Ltd shall provide guidance to the host manufacturer for compliance with thePart 15B requirements.Note 5: FCC ID label on the final system must be labeled with “Contains FCC ID: VVXLM505” or “Contains transmier moduleFCC ID: VVXLM505”.The transmier module must be installed and used in strict accordance with the manufacturer's instrucons as described inthe user documentaon that comes with the host product. LM Technologies Ltd is responsible for the compliance of the modulein all final hosts. LM505-M Page 3 of 3 +44(0)207 428 2647 | www.lm-technologies.com | sales@lm-technologies.comProduct: LM505 ModulePart No: 505-0513Datasheet Rev 1.0/25-07-12 6 FCC Radiation Exposure Statement

Navigation menu