LITE ON TECHNOLOGY WN4639R 802.11n, 2.4G 1T1R Wireless LAN USB Module User Manual LiteOn Technology Corp

LITE-ON Technology Corp. 802.11n, 2.4G 1T1R Wireless LAN USB Module LiteOn Technology Corp

User Manual

USER MANUAL802.11n, 2.4G 1T1R Wireless LAN USB ModuleWN4639R(5V)MediaTek MT7601UVers ion 1 .1Change HistoryRevision Date Author Change Li stVe r s i o n 1 . 0 2015/08/08 Ben J Chen PreliminaryVe r s i o n 1 . 1 2015/09/05 Ben J Chen Update Antenna SPEC* This document contains confidential proprietary information and is property of LTC. The contents of this document should not be disclosed to unauthorized persons without the written consent of LTC
Page 2/1586(50$18$/802.11n, 2.4G 1T1R Wireless LAN USB ModuleWN4639R(5V)MediaTek MT7601UVers ion 1 .1Networking B.U.Lite-on Technology Corporation4F, No. 90, Chien 1 Rd.,Chung Ho, Ne w Taipei City 235, Taiwan, R.O.C.Customer Approval: (Signature) (Title) (Company) (Date)(Please Sign Back by FAX. For Confirming the Spec Only, not an Official Agreement for OEM/ODM Business)
Page 3/1CONTENTPRODUCT FEATURES...........................................................................................................................4 PRODUCT SPECIFICATIONS .............................................................................................................5 MAIN CHIPSET ..............................................................................................................................................5 FUNCTIONA L SPECI FICATI O NS .....................................................................................................................5 RECOMMENDED OPERATION CONDITIONS..............................................................................6 DC CHARACTERISTICS .......................................................................................................................6 PIN ASSIGMENT .....................................................................................................................................7 USB CONNECTOR SPEC ......................................................................................................................7 POWER ON SEQUENCE TIMING ......................................................................................................8 RESET TIMING SPEC............................................................................................................................8 MECHANICAL .........................................................................................................................................9 ANTENNA SPEC ................................................................................................................................... 10 EEPROM INFORMATION ................................................................................................................. 13 ENVIRONMENTAL ............................................................................................................................. 13 OPERATING .................................................................................................................................................13 STORA GE .....................................................................................................................................................13 PACKING DRAWING.......................................................................................................................... 14
Page 4/1PRODUCT FEATURESzOperate at ISM frequency Band (2.4GHz)zIEEE Standards Support, 802.11b, 802.11g and 802.11nzFully comply with USB 2.0 high speed modezEnterprise level security supporting: WPA, WPA2, WPS, WAPIzOne-stream IEEE 802.11n support for 20MHz and 40MHz bandwidth channels provides PHY layer rates up to 150MbpszSupport Wi-Fi DirectzSupport Wake-On WLANzRoHS compliancezLow Halogen complianceApplications:This module is applied to TV product which limit to fixed application.
Page 5/1PRODUCT SPECIFICATIONSMAIN CHIPSETMAC/ Baseband/ RF: MediaTek MT7601UFUNCTIONAL SPECIFICATIONSWi-Fi FunctionStandard IEEE802.11b; IEEE 802.11g; IEEE 802.11nBus Interface USB2.0Data Rate802.11b:11, 5.5, 2, 1 Mbps802.11g:54, 48, 36, 24, 18, 12, 9, 6 Mbps802.11n:MCS 0 to 7 for HT20MHzMCS 0 to 7 for HT40MHzMedia Access Control CSMA/CA with ACKModulation Techniques802.11b:CCK, DQPSK, DBPSK802.11g:64QAM, 16QAM, QPSK, BPSK802.11n:64QAM, 16QAM, QPSK, BPSKNetwork Architecture Ad-hoc mode (Peer-to-Peer)Infrastructure modeOperation Channel2.4GHz11: (Ch. 1-11) –United States13: (Ch. 1-13) –Europe14: (Ch. 1-14) –JapanFrequency Range 802.11bg2.412 ~ 2.4835 GHzTransmit Output Power –1x1(Tolerance: ±1.5dBm)802.11b:15 dBm@1~11Mbps802.11g:14 dBm@6~54Mbps802.11n: 20MHz: 14 dBm@MCS0~740MHz:14 dBm@MCS0~7Receiver Sensitivity802.11b:-84 dBm@11Mbps802.11g:-71 dBm@54Mbps802.11n:20MHz-70 dBm@MCS740MHz-67 dBm@MCS7
Page 6/1SecurityWPA, WPA2, WPS, WEP 64b&128bit, IEEE 802.1X,IEEE 802.11iOperating Voltage5V ±5% I/O supply voltageOSSupportedMicrosoft Windows Win7/Win8; Linux basedPower ConsumptionModeAveragePeakTXRXUnassociated IdleStandbyAntenna TypeOne is Metal Antenna, the other is U.FL connector for plugging external PIFA antennaRECOMMENDED OPERATION CONDITIONSSymbolRatingMinTypMaxUnitsVCC5V Supply Voltage4.7555.25VVDD333.3V Supply Voltage2.973.33.63VVDD121.2V Supply Voltage1.141.21.26VVDD151.5V Supply Voltage1.4251.51.575VDC CHARACTERISTICSSymbolParameterMinTypMaxUnitsVILInput Low Voltage-0.28-0.6VVIHInput High Voltage2.0-3.63VVOLOutput Low Voltage-0.28-0.4VOHOutput High Voltage2.4-3.63V
Page 7/1PIN ASSIGMENTPin.Pin DefineStatus1+5VYES2USB_D-YES3USB_D+YES4GNDYES5RESET#(Active Low)YES6WAK E (Active High)YESUSB CONNECTOR SPEC
Page 8/18POWER ONSEQUENCE TIMINGRESET TIMING SPEC
Page 9/18MECHANICALBLOCK DIAGRAM
Page 10/18ANTENNA SPECMetal Wifi Antenna (Q’ty:1) For RX
Page 11/18External Wifi Antenna (Q’ty:1) For TX
Page 12/18
Page 13/18 EEPROM INFORMATION Reg Domain Worldwide Control by Driver Offset 0x38 for 5G: 0xFF Offset 0x39 for 2.4G: 0xFF Vendor ID 0x148F Product ID 0x7601 ENVIRONMENTAL Operating Operating Temperature: 0 to 60 qC (32 to 140 qF) Relative Humidity: 5-90% (non-condensing) Storage Temperature: -20 to 70 qC (-4 to 158 qF) Relative Humidity: 5-95% (non-condensing)
Page 14/18 PACKING DRAWING Tray
Page 15/18
FCC WARING STATEMENTThis equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 　Reorient or relocate the receiving antenna. 　Increase the separation between the equipment and receiver. 　Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.　Consult the dealer or an experienced radio/TV technician for help. You are cautioned that changes or modifications not expressly approved by the party responsiblefor compliance could void your authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located with any other transmitters except inaccordance with FCC multi-transmitter product procedures.Refering to the multi-transmitter policy, multiple-transmitter(s) and module(s) can be operatedsimultaneously without C2PC. FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. IMPORTANT NOTE:20 cm minimum distance has to be able to be maintained between the antenna and the users for thehost this module is integrated into. Under such configuration, the FCC radiation exposure limits setforth for an population/uncontrolled environment can be satisfied.
IMPORTANT NOTE:This module is intended for OEM integrator. The OEM integrator is responsible for the complianceto all the rules that apply to the product into which this certified RF module is integrated. Additional testing and certification may be necessary when multiple modules are used. USERS MANUAL OF THE END PRODUCT: In the users manual of the end product, the end user has to be informed to keep at least 20 cmseparation with the antenna while this end product is installed and operated. The end user has tobe infored that the FCC readio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operated this equipment.If the size of the end product is smaller than 8x10cm, then additional FCC Part15.19 statementis required to be availabe in the users manual: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including inteference that may causeundesired operation. OEM/Integrators Installation Manual The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user manual of the end product. The user manual of the end product which is provided by OEM integrators for end users must include the following information in a prominent location. 1. To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi　transmitter product transmitter product procedures.It is the responsibility of the professional installer to ensure that the system.2. Only those antennas with same type and lesser gain filed under this FCC ID number can be used with this device.3. The regulatory label on the final system must include the statement: “Contains FCC ID: PPQ-WN4639R“.
OEM Integrator Checklist The party below will implement the LITE-ON Module in host systems in accordance with the instructions specified in this document and the documents referenced herein.1. The OEM integrator will ensure the Module is integrated in a host systems using only the approved antenna model(s) described in this document.2. The OEM integrator will ensure the antenna placement inside the host system will maintain the required spacing to end user for RF Exposure compliance, as specified in this document.3. If other radios are integrated inside the host with the LITE-ON Module, the OEM integrator will contact its test lab, TCB or LITE-ON to determine if additional FCC compliance evaluation is required to meet FCC collocation rules.4. The OEM integrator will ensure end user documentation will contain the specified regulatory wording and ensure the host system and the Module itself are labeled as specified in this document.5. The OEM integrator will ensure the Module is programmed in the factory with compliant transmit power not exceeding the levels specified in this document.LITE-ON requests that the OEM integrator acknowledge its receipt of this document and the above instructions. You may contact LITE-ON with any questions concerning this document or the responsibilities of the OEM integrator.

Navigation menu